Sor 16-17 PDF

GOVERNMENT OF TELANGANA
COMMON SCHEDULE OF RATES

AS PER
T.S. REVISED STANDARD DATA
FOR THE YEAR 2016-17
(Effective from 1st June, 2016)
BOARD OF CHIEF ENGINEERS

MASTER
INDEX
Sl. No. Description Page No.

From To
1 Part-I (Irrigation & CAD Works) 1 42
2 Part-II(Road & Bridge Works) 1 23
3 Part-III (Building works) 1 344
4 Part-IV ( Public Health Works) 1 98
5 Annexure Latest G.O. on 1 3

Seigniorage Charges
Proceedings-Part-I-Irrigation& CAD SoR 2016-17
Office of the Engineer-in-Chief (I.W)

I&CAD Dept., Errum Manzil, Hyderabad
Proc. No. ENC/IW/P&M/EE/DEE-2/AEE.4/SOR 16-17/Vol.I Dt:28.06.2016
Sub: Schedule of Rates as per Telangana Revised Standard Data for the year
2016-17 -Irrigation & CAD works(Part-I), Road & Bridge Works (Part-II),
Building Work Items(Part-III) and Public Health Items (Part-IV)-approved-
Printing & Communication of SoRs - Reg.
Ref: 1) G.O.Ms.No.49,I&CAD (PW:Reforms)Dept., dt:2.3.2009
2) ENC (R&B) Lr.No. 2467/EE(R)/DEE1/AEE4/2016 dt. 31-05-2016
3) ENC(PR) Lr No.714/AE/DEE(T)/SoR 2016-17/2016 Dt:30.05.2016
4) ENC (R&B) Procs. No. ENC(B)/DEE1/SAA3/ B-SoR: 2016-17
dt: 23-06-2016
5) ENC (PH&ME) Lr.No. 146/AE4/T2/SoR/2016-17 dt. 16-06-2016
6) Industrial Consumer Price Index points obtained from Commissioner,
Labour Department
7) Minutes of BOCEs meeting for Schedule of Rates held on 26.05.2016.
****
The Government have approved Revised Standard Data vide ref 1st cited. The
Schedule of Rates as per Telangana Revised Standard Data for the year 2016-17 is
approved based on the following.
The draft schedule of rates for the year 2016-17 furnished by the ENC (IW),
ENC (PR), ENC(R&B), ENC(R&B-B) and ENC (PH&ME) were discussed and finalized in
the annual BOCE meeting held on 26.05.2016 at 3:00 PM in BOCEs Conference hall.
Based on the BoCEs Discussions The Engineer-in- Chief, Public Health vide
reference 5th has furnished Part-IV of Common SoR for Public Health works items and
Public Health Materials
The Engineer-in-Chief (R&B) vide reference 2nd cited has furnished the Part-II
of Common SoR for Roads & Bridge items for the year 2016-17.
The Engineer-in- Chief (Buildings), R&B vide reference 4th cited has furnished
the Part-III of Common SoR i.e., Buildings for the year 2016-17
The Engineer-in-Chief (IW) has furnished the rates proposed for Labour Rates
and Basic data for Irrigation Items Part-I of Common SoR for the year 2016-17.
The procedure for the adoption of Irrigation work items, lead & lift charges
(Common to all departments) is incorporated in the Annexure-A of SoR. The approved
basic rates are applicable to the datas as per Revised Standard Data approved by the
Government vide G.O.1st cited.
The Government vide G.O. MS.No.15 T.R&B(R-1) Department Dt:24.12.2014

has issued orders for Adoption of MoRTH data by all Engineering Departments of
Telangana State in respect of Road and Bridge works, with prevailing Standard
Schedule of Rates in preparation of estimates. The Government approval is necessary
to adopt any other data.
The lead & lift charges are common to all Engineering Departments. The
detailed calculations are incorporated in the Lead & lift chapter in the I&CAD Works
(Part-I) of Telangana Revised Standard Data.
One hard copy & compact disc containing Schedule of Rates is here with
communicated. No other items other than the items communicated by this Office shall
be introduced in the SoR.
The Heads of Department and Officers mentioned below are authorized to print
the Schedule of Rates for the year 2016-17. The unauthorized printing & selling of the
SoR is strictly prohibited. The Schedule of Rates for 2016-17 will be in force until the
new SoR comes in to force.
Any discrepancies found (or) corrections required in SoR 2016-17 may be

brought to the notice of undersigned for issuing corrections.
The revised rates will come into force from 1st June of 2016.
The receipt of the proceedings may be acknowledged.
Encl: SoR 2016-17 containing Part-I (Irrigation & CAD works), Part-II (Road &
Bridge works) Part-III (Buildings works) and Part-IV (Public Health works)
Sd/- J.Vijaya Prakash, 28.06.2016

Engineer-in-Chief (I.W.)
Chairman, BOCE (SoR)
4
I) Copy communicated to the Special Chief Secretary to Govt., I&CAD Dept., B-Block,
Secretariat Buildings, Hyderabad for favour of information.
II) Copy Communicated to the following Heads of Departments along with Enclosures
for information.
1) Engineer-in-Chief (Admn & NH)., Roads & Buildings Department.
2) Engineer-in- Chief (PH & ME), Public Health Department.
3) Engineer-in-Chief (P.R.), Panchayath Raj Department.
4) Engineer-in-Chief (RWS) R W S, Department.
5) Engineer-in-Chief (Buildings), R&B Department.
6) Copy of C.D containing Schedule of Rates 2016-17 & Standard data, part-1
(Irrigation & CAD works) to all Engineers-in-Chief, Chief Engineers of Irrigation & CAD
Department for favour of information.
III) Copy to the Superintending Engineer, Irrigation Circle, Irrigation & CAD
Department, Red Hill, Hyderabad for necessary action.

5
Important Read The following
ANNEXURE- A
1) The SPIU (Irrigation), Centre for Good Governance (CGG), Hyderabad has
developed software package linking the basic input data of Irrigation with approved
data of Irrigation work items.
2) The lead and lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the Lead &Lift charges chapter in the I&CAD works
(Part-1) of Telangana Revised standard data.
The Leads for Steel shall be from the nearest market place to the project
area
3) For Gates & Hoist works, the excise duty on the fabrication of work (other than
materials) shall be added as per the Government Orders issued from time to time while
preparing the estimate.
4) The estimate sanctioning authority shall physically verify each and every Irrigation
work item data incorporated in the estimate with basic input data before sanction of
the estimate. Any lapses or arithmetic errors arising in the sanction of datas
/estimate due to adoption of the software package lies entirely on the
concerned estimate sanctioning authority only.
5) Any discrepancies / corrections required for improper basic input data appearing in
the approved datas of Irrigation work items in the software package and hard copy of
SoR & Standard datas (part-1) may be brought to the notice of undersigned for
issuing corrections.
6) Estimate Sanction Authority shall examine the Components/Materials/Items

proposed for arriving finished rate in the Data. Any Items Components/Materials/Items
not required for that work, can be deleted by the Estimate Sanctioning
Authority while according the approval to Datas.

Part-I-Irrigation& CAD SoR 2016-17
PART-I
IRRIGATION & CAD
WORKS
INDEX
PART-I
Sl. No. Description Page No.

From To
1 Part-I (Irrigation & CAD Works)
2 Preamble 1 6
3 Labour Rates 7 14
4 Basic input data for Irrigation 15 30

work items
5 Hire Charges of Machinery 31 36
6 Conveyance Charges of 37 42
Materials
Part-I Preamble-Common SoR 2016-17
PREAMBLE
1
2
PREAMBLE
I. AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:
a) i. 25% extra over the rates on labour component of works is

allowed in all Municipal Corporation Limits of Telangana except
Greater Hyderabad (up to a belt of 12 Kms. from Municipal
Corporation limits) and other corporations as notified by the
Government from time to time.
ii. 40% extra over the rates on labour component of works is allowed or
Greater Hyderabad (up to a belt of 12 Kms. from Municipal
Corporation limits).
b) 20% extra over basic rates on labour component of works is allowed in
all District Headquarters and the remaining Municipal limits (up to a belt
of 12 Kms from Municipal limits).
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds.
Only equivalent number of Man Mazdoor shall be provided in the Jail premises and no
women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
20% over basic rates on labour component works i s allowed for works
situated within 10 Kms belt of Industrial area of, Jeedimetla, Lingampally,
Ibrahimpatnam,Tandur in Ranga Reddy District, Kothur in Mahabubnagar District,
Patancheru, Ramachandrapur in Medak District, Bibinagar and Wadepally in Nalgonda
District, Ramagundam, Godavarikhani, Nagapally(Centenary Colony, Begumpet X
roads),Takkelapally in Karimnagar District, Manchiryal, Mandamarri, Bellampalli in
Adilabad District, Sarpaka, Kothagudem, Paloncha, Manguguru, Singareni Collieries in
Khammam District and Kamalapur, Bhoopalpally of Warangal District.
3
D) AGENCY / TRIBAL AREAS:
a) 25% extra is allowed for the works located within the interior Agency /
Tribal limits, i.e. for the works located within & upto16 KMs from any all
weather route inside Agency / Tribal.
b) 40% extra is allowed for the works located within the interior Agency /
Tribal limits, i.e. for the works located beyond 16 KMs from any all
NOTE:
1. No extra percentage is permissible in respect of Forest

produce such as Bamboo, Rellu grass and for all materials
obtained from outside the Agency / Tribal.
2. The extra percentage under Agency / Tribal areas
allowance may be allowed on the labour component and on
the labour charges in the rates for conveyance of materials.
3. The extra percentage on cost of materials in Agency / Tribal areas can
be allowed on the labour component only, if they are
manufactured in the Agency / Tribal areas itself except Forest
produce.
E) GHAT ROADS:
For Ghat Roads and other roads steeper than 1 in 20, the length of the
road may be taken as 1.5 times the existing length of the road for the purpose of
leads only for conveyance of materials based on the certificate for the Ghat Road given
by the Superintending Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief Engineer can
adopt the equivalent length of road as 2 times of actual length.
Note:
Area allowances:
If more than one area allowance (such as those) for (1)

Municipalities (2) Agency / Tribal areas (3) Industrial areas are
applicable for a particular situation, only the maximum out of the
allowable percentages is to be allowed.
4
II. EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN

RESTRICTED PLACES: -
A. TRENCHES:
1) Trenches of not more than 2 metres in width : 25% extra
B. TRIAL PITS:
1) Up to 2 Metres depth : 25% extra

2) 2 Metres to 4 Metres depth : 50% extra
6) More than 9 Metres depth : 200% extra
C. EXCAVATION IN RESTRICTED PLACES:-
1 Foundation of Buildings : 75% extra

2 For pipe lines where the depth is less than : 75% extra
1.5 times the width
3 For pipe lines where the depth is 1.5 : 120% extra
times or more than the width
4 Silt removal in restricted areas such as : 120% extra
U. Ts., Culverts and Syphons.
5 Excavation of field channels : 75% extra
6 For narrow trenches not more than 2 : 75% extra
meters in width and depth not less than
twice the width and for excavation of road
boundary drains, model sections of canals.
7 High berm cutting of not more than 150 : 50% extra
mm average thickness and sectioning for
roads
Note: 1) The extra percentage is allowed over Common item for all earth works (COM-
MWRK- Manual Works) for corresponding soil and Standard data items. It
includes the charges for all lifts and initial lead but does not include dewatering
charges if any in respect of all the items under (A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted
places are to be allowed for (2/3) rd of the cost and shall not to be allowed in
5
respect of items involving blasting component which may be taken as 1/3 of the
cost.
III. SEIGNIORAGE CHARGES:

Note:
The rates of the materials indicated in the SOR are exclusive of Seigniorage Charges.
Appropriate Seigniorage Charges for relevant materials are to be added to the Unit
rate of work item in the estimates as fixed by the Government in G.O.Ms.No.67
(Industries and Commerce Dept.) dt: 26.09.2015. Further, the Government of
Telangana vide G.O.Ms.No.16 (Industries and Commerce Dept.) dt: 16.03.2016 has
issued further orders towards Seogniorage fee & Dead Rent for 31 more minerals in
addition to the minor minerals already vested with the state Government and the
same may be noted, accordingly. In case of revision, the revised rates as fixed by
Mines and Geology Department have to be adopted.

6
Part-I Labour Rates-Common SoR 2016-17
LABOUR RATES
7
8
LABOUR RATES
S.Rate
Sl
CATEGORY OF WORKER for
No.
2016-17
I. SKILLED CATEGORY:
1 Bar bender 565
2 Black smith / Tin smith / Rivetor 445
3 Blaster ( Licensed ) 515
4 Carpenter Cl- I 480
5 Electrician ( Licensed ) 515
6 Fitter Cl- I 480
7 Floor Polisher / Tile Layer 445
8 Foreman 515
9 Gauge reader 430
10 Maistry / Work Inspector 460
11 Mason Cl- I / Brick layer Cl- I 445
12 Mechanic Cl- I 480
13 Operator Air compressor / DG set 445
14 Operator Batching plant 515
15 Operator Bus/Ambulance/ Lorry/ Tanker 515
16 Operator Concrete / Asphalt mixer 445
17 Operator Concrete / Asphalt paver 445
18 Operator Concrete pump / Placer/ ice plant 445
19 Operator Core drilling machine 515
9
S.Rate
Sl
No.
2016-17
20 Operator Crane/ Tower crane/ Cable way 515
21 Operator Drilling jumbo / Loco / Winch 445
22 Operator Grouting/ Guniting/ Shotcreting 445
23 Operator Jackhammer/Pneumatic tamper 445
24 Operator Pump / Ventilation fan 445
25 Operator Lathe/Drilling/Shearing machine 515
26 Operator Bending / Planing machine 445
27 Operator Road roller 445
28 Operator Shovel / Scraper / Dozer 515
29 Operator Spillway / Sluice gate 445
30 Operator Crusher / Conveyor / Mucker 445
31 Operator Tipper / Dumper / Transit mixer 515
32 Operator Concrete vibrator 445
33 Operator Vibratory plain / padfoot roller 445
34 Operator Wagon drill / Drifter 515
35 Painter Cl- I 515
36 Plumber ( Licensed ) / Pipe fitter 515
37 Sarang / Khalasi 445
38 Spun pipe moulder 445
39 Stone chiseller CI- I / Stone cutter Cl- l 445
40 Struct. steel Fabricator / Marker / Erector 555
10
S.Rate
Sl
No.
2016-17
41 Welder / Gas Cutter 445
42 Welder (X-ray quality) 515
II. SEMI SKILLED CATEGORY:
1 Asphalt Sprayer / Boiler attendant 400
2 Bhisti 400
3 Boatman with boat 420
4 Carpenter Cl- II / Erector shuttering 405
5 Cartman with double bullock cart 460
6 Cartman with single bullock cart 430
7 Chavali / Navagani 400
8 Crowbarman / Jumperman 400
9 Fitter Cl- II 405
10 Gangman / Head / Survey mazdoor 400
11 Gardener / Trained mali 400
12 Helper Air compressor / DG set 400
13 Helper Batching plant 400
14 Helper Blasting 400
15 Helper Bus/ Ambulance/ Lorry/ Tanker 400
16 Helper Bending/Shearing/Planing machine 400
17 Helper Carpenter 400
18 Helper Concrete / Asphalt mixer 400
11
S.Rate
Sl
No.
2016-17
19 Helper Concrete / Asphalt paver 400
20 Helper Core drilling machine 400
21 Helper Crane/ Tower crane/ Cable way 400
22 Helper Drilling jumbo / Loco / Winch 400
23 Helper Fitter / Fabrication 400
24 Helper Grouting/ Guniting/ Shotcreting 400
25 Helper Jack hammer / Pneumatic tamper 400
26 Helper Laboratory / Instrumentation 400
27 Helper Road roller 400
28 Helper Shovel / Scraper / Dozer 400
29 Helper Crusher / Conveyor / Mucker 400
30 Helper Tipper / Dumper/ Transit mixer 400
31 Helper Vibrator 400
32 Helper Vibratory plain/ padfoot roller 400
33 Helper Wagon drill/ Drifter 400
34 Lineman Electric / Telephone 400
35 Mason Cl- ll / Brick layer Cl-II 405
36 Mechanic Cl- II 405
37 Painter Cl- II 405
38 Patkari / Neeraganti / Sowdy 400
39 Stone Chiseller Cl- II 400
12
S.Rate
Sl
No.
2016-17
40 Stone breaker / Hammerman 400
41 Valveman / Canal sluice operator 400
III. UN-SKILLED CATEGORY:
1 Cement / Asphalt handling mazdoor 350
2 Civic worker 350
3 Heavy mazdoor 350
4 Light mazdoor 350
5 Watchman 350
IV. OTHER CATEGORY:
1 Care-taker / conductor / Lift attender 410
2 Cook / Messman 410
3 Dhobi 410
4 Diploma Engineer / Surveyor 650
5 Diver with headgear 515
6 Graduate / Laboratory Assistant 515
7 Graduate Engineer/ Geologist 870
8 Horticulture Assistant / Photographer 430
9 ITI certificate holder / Tracer / Printer 510
10 Literate mazdoor 405
11 Stenographer / Computer Operator 560
12 Telephone / Wireless Operator 510
13
S.Rate
Sl
No.
2016-17
13 Typist/Job Typist 510
CAD operator with diploma in

14 700
Engineering/General degree with CAD Certificate
15 Jeep Driver 500
16 Data Processing Operator 700
Note:-1)The wage should not be less than the minimum wages of

schedule of employment, subject to out turn.
2)25%extra over the corresponding labour rates in respect of the work to
be done during night time subject to issue of certificate accordingly by the
concerned estimate sanctioning authority for providing in the data and by
concerned Executive Engineer in charge of the work for payment. The
night time allowance is applicable only to the works done under Greater
Hyderabad Municipal Corporation and Greater Warangal Muncipal
Corporation limits only.
14
Part-I Basic Input Data for Irrigation Items-Common SoR 2016-17
BASIC INPUT DATA

FOR IRRIGATION
WORK ITEMS
15
16
STATEMENT OF RATES FOR MATERIALS

FOR THE YEAR : 2016-17
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, shall be the criteria for
fixing market rates for materials.
2 The rates for materials shall be inclusive of all taxes, duties and other local levies.
3 The rates for materials shall be exclusive of Seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges, shall be for all leads.
5 The rates provided for useful rubble / stone chips from excavation shall be at dump
yard.
S. Rate for
Sl No. DESCRIPTION OF MATERIAL UNIT
2016-17
1 Acetylene gas cum 320

2 Asphalt 80/100 Grade Kg 45
3 Binding wire Kg 55
4 Burnt stone slab 10 cm thick sqm 310
Ordinary Portland Cement (43/53 GRADE)
5500 (Rate for
5 (a) *(Note: As per Monthly rate fixed by Sub- tonne
5/2016)
Committee)
Portland Pozzolana Cement *(Note: As per 5400 (Rate for

5 (b) tonne
Monthly rate fixed by Sub-Committee) 5/2016)
Portland Slag Cement *(Note: As per Monthly 5200 (Rate for

5 (c) tonne
rate fixed by Sub-Committee) 5/2016)
6 Chequered plate Kg 63
Coarse aggregate 10-4.75 mm(excluding
7 cum 875
Seigniorage charges)
Coarse aggregate 20-10 mm(excluding
8 cum 1,150
9 cum 1,090
10 cum 635
The aggregate rates mentioned above (from Sl.No.7 to
Sl.No.10) are exclusive of Seigniorage charges but including
blasting charges of Rs.70/cum and 25% machine crushing
charges. However, if the metal is obtained from hand broken,
the blasting and crushing charges shall be deducted. The
aggregate shall be HB Stone of Granite, Dolamite, Dolerite and
Trap. (Quartzite and Basalt with aggregate impact of less than
20)
17
S. Rate for
2016-17
11 Coir brush Each 50
12 Copper sheet 16 SWG kg 625

Coursed rubble stone 30 x 30 x 45 cm(excluding
13 Each 20
Coursed rubble stone 30 x 30 x 60 cm(excluding
14 Each 28
15 Curing Compound Ltr 130
16 D cord Rm 7
17 Delay - noiseless trunk Each 16
18 Detonating fuse coil Rm 7
19 Detonating shock tube / Cord relays Rm 35
20 Detonator delay type Each 16
21 Detonator electric Each 10
22 Detonator ordinary Each 5
23 Empty cement bag Each 5
24 Explosive ANFO kg 55
25 Explosive ANFO high strength booster kg 70
26 Explosive small dia ( Kelvex-220 or equivalent) kg 75

Fine aggregate/ sand(un- screened) for
27 Concrete, Filtering items, Filling & Blindage cum 560
(excluding Seigniorage charges)
Fine aggregate /Sand (Screened) for Mortar
28 ,Plastering items and Sand blasting cum 760
items(excluding Seigniorage charges)
29 Geo-textile ( filter fabric ) 160 gsm sqm 100

32 G I Pipe 100 mm dia B Class Rm 785
33 G I Pipe 15 mm dia A class Rm 80
34 G I pipe 25 mm dia A class Rm 150
35 G I pipe 40 mm dia B class Rm 250
36 G I pipe 50 mm dia A class Rm 290
18
S. Rate for
2016-17
37 G I Pipe 80 mm dia B Class Rm 500

38 G.I Bolts / Nuts and Washers kg 100
39 (a) G.I sheet ( plain ) tonne 60000
39 (b) G.I sheet ( corrugated ) tonne 64000
40 Hariyala turfing sods sqm 28
41 Hectometer stone one line dressed Each 260
42 Hemp yarn kg 72
43 Honne wood planks cum 57000
44 Hume pipe with collar 150 mm dia (NP2) Rm 220
45 Hume pipe with collar 300 mm dia (NP2) Rm 430
46 J- Bolts 30 cm long Each 40
47 Jungle wood planks cum 26000
48 Khandki stone 15 to 20 cm height Each 11
51 Kilometer stone one line dressed Each 470
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 92
55 M S Bolts / Nuts / Washers kg 70
Murum(including loading charges but excluding
56 cum 175
Seigniorage charges )
57 Oxalic acid Ltr 80
58 Oxygen gas cum 40
59 PVC sealing strip Rm 44
60 PVC water stopper 310 mm wide Rm 460
61 PVC pipe of 100 mm dia Rm 160

Reinforcement steel (HYSD/TMT ) from
integrated steel producers like
41000 (Rate for
62 (a) TATA,SAIL,VSP,Jindal as approved by Ministry of tonne
5/2016)
Steel. *(Note: As per Monthly rate fixed by
Sub-Committee)
19
S. Rate for
2016-17
Reinforcement steel (HYSD/TMT ) BIS

approved secondary producers confirming to Monthly rate
62 (b) IS:1786-2008 must have valid licence and well tonne fixed by Sub-
established TMT process of either Thermax, Committee
Tempcore, Evcon Turbo & Turboquench.
63 Resin bond Cement capsule Each 45
Rough stone 20 x 20 x 75 cm ( Including Loading
64 Each 21
charges but excluding Seigniorage Charges)
Shahabad stone slab polished (including loading
65 (a) sqm 240
charges but excluding Seigniorage charges)
Shahabad stone slab non-polished (including
65 (b) loading charges but excluding Seigniorage sqm 140
charges)
Stone chips (at dump yard/Spoil)(including
66 loading charges but excluding Seigniorage cum 185
charges)
Stone chips ( at quarry )(including loading
67 cum 360
charges but excluding Seigniorage charges)
Structural steel angle / channel / beam / bars
37500 (Rate for
68 *(Note: As per Monthly rate fixed by Sub- tonne
5/2016)
Committee)
Structural steel plate / flats (including loading
charges) 41000 (Rate for
69 tonne
*(Note: As per Monthly rate fixed by Sub- 5/2016)
Committee)
Super Plasticizer (Pozolith-55R/Conplast RP-264
70 kg 45
or equivalent )
71 Synthetic Enamel paint 1st quality Ltr 240
72 Synthetic adhesive ( Resin + Hardener ) Kg 348

73 Tar felt joint filler board 12 mm thick sqm 410
74 Tar felt joint filler board 20 mm thick sqm 630
Through stones 20 x 20 x 30 to 45 cm (including
75 loading charges but excluding Seigniorage Each 21
charges)
Through stones 25 x 25 x 45 to 60 cm long
76 (including loading charges but excluding Each 37
Through stones 30 x 30 x 65 to 75 cm long
77 (including loading charges but excluding Each 57
Un-coursed rubble stones ( at dump yard /Spoil)
78 (including loading charges but excluding cum 165
20
S. Rate for
2016-17
Un-coursed rubble stones ( at quarry )( including

79 loading charges but excluding Seigniorage cum 330
charges)
80 Water proofing compound kg 80
81 Welding electrodes 4 mm dia Each 13
82 Wire brush Each 41
83 Wire mesh 20 gauge sqm 220
84 Zinc chromate red oxide primer paint Ltr 170
85 inorganic zinc silicate Ltr 550
86 solvent less coal tar epoxy paint Ltr 250

87 Zinc phosphate primer Ltr 200
88 Allkyd based iron oxide paint Ltr 175
a) Cost of hdpe (80mm dia) Rm 220

89 b) light black MS casing pipe 80mm dia (4mm
Rm 680
thick)
90 welded steel wire fabric 100X100X5 mm size Kg 165
91 Protective Mastic Ltr 475
92 Solventless coal tar epoxy (brown) Ltr 260
93 Excavation of drain with Excavator cum 35

Items
are
Included
in the
Year
2016-17
Crushed stone sand/Rock sand 4.75mm to 2.36
94 mm as per IS 383 (1970) (excluding Cum 510
95 Fly ash conforming to IS: 3812 ( Part II & I) Cum 72
96 RM 5
Benching old embankment slopes 0.45 X 0.45 M
Laying of Sand Bags in the stipulated places
including cost of empty cement bag, sand,
97 thread, stitching charges and labour charges per bag 26
etc., with 13.615% overhead charges and
contractors profit.
21
S. Rate for
2016-17
Rough stone for revetment 225mm thick

98 ( including Loading charges but excluding cum 160
Eradication of Weed growth from Drains, Canals
99 sqm 2
by spraying Chemicals
100 Thinner ltr 80
101 Credit for excavated rock found suitable for use Cum 194
Earth Cost or compensation for earth taken

102 from private land (Excluding Seigniorage Cum 40
Charges)
ADDITIONAL MATERIALS FOR GATES & HOISTS

GUIDE LINES :
1 For cast steel / Alloy steel / Forged steel / Bronze, Aluminum alloy components the rates
shall be inclusive of cost of basic metal for these components, casting / forging charges,
machining charges and applicable excise duty on finished alloy component.
2 For other materials the rates shall be prevailing market rates.
Sl S. Rate for
DESCRIPTION OF MATERIAL UNIT
No. 2016-17
1 Alloy steel ( IS : 1570-carbon steel ) shafts Kg 240
2 Alloy steel ( IS : 1570-stainless steel ) pins Kg 420
3 Bolt / Nut / Washer ( hot dipped galvanized ) Kg 120
4 Bolt / Nut / Washer ( stainless steel ) Kg 370

5
Bronze (IS:305)bearings/bushes Kg 970
(a)
5
Aluminum alloy(IS:305)bearings/bushes Kg 960
(b)
6 Cast iron blocks Kg 90
7 Cast steel drums / gears Kg 245
8 Cast steel pinions Kg 230
22
Sl S. Rate for
No. 2016-17
9 Cast steel wheels / pulleys / hubs / rollers / retainers Kg 200

10 Chemical for de-greasing/ derusting/phosphate coating Ltr 140
11 Coal tar epoxy paint Ltr 240
12 Forged steel hooks / shackles Kg 260
13 MS pipe 200 / 300 mm dia Kg 175
14 MS pipe 32 mm dia Rm 190
15 MS pipe 25 mm dia Rm 165
16 Rubber bottom seal ( IS : 11855 ) Rm 780

17 Rubber side seal ( music note type Teflon claded ) ( IS : 11855 ) Rm 1,840
Rubber side seal ( music note type uncladed ) ( IS
18 Rm 1,330
: 11855 )
19 Rubber side seal Z-type ( IS : 11855 ) Rm 1,760
20 Rubber corner seal ( Teflon claded ) ( IS : 11855 ) Rm 1,790
21 Rubber corner seal ( un claded ) ( IS : 11855 ) Rm 1,270
22 Stainless steel plates / flats Kg 300

Welding electrode 4 mm dia x 450 mm ( radiographic low
23 Each 18
hydrogen )
24 Welding electrode 4 mm dia x 450 mm ( stainless steel ) Each 27
25 Wire rope 6x37 constn ( IS : 2266 ) Kg 200
26 Zinc Kg 190
27 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr 700
23
MATERIALS FOR POWER SUPPLY WORKS

Sl S. Rate for
No. 2016-17
1 Electric pole with fixtures Each
2 Flood light 500 W Each

For
3 Flood light set Each
Establishing
4 Flouscent tube light 40 W Each Electrical
Sub-Stations
5 Flouscent tube light set Each at the Project
Sites
6 HT / LT Circuit breaker with accessories Set wherever
1000 necessary,the
7 HT / LT Line conductor rates
m
approved by
8 PVC Armoured cable10 sqmm and below Rm TSTRANSCO
may be
9 PVC Armoured cable 16 sqmm Rm
followed.
DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT

GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:
1 The Capital cost of machinery / equipment shall be for new machinery / equipment
and shall be inclusive of all taxes, duties, other levies.
2 The cost of transport vehicles / equipment shall be exclusive of cost of tyres and
tubes.
3 The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges
and other consumable accessories shall not be included in the capital cost.
4 In cases, where the current capital cost of machinery / equipment could not be
collected through enquiries, the capital cost considered for previous year may be
updated on the basis of average percentage increase / decrease in the index for
machinery published in the R.B.I Bulletin.
Sl S. Rate for
No. 2016-17
24
Sl S. Rate for
No. 2016-17
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each 2,150,000
tyres and tubes 6 sets 86,000
2 Air compressor 5 cmm electric Each 710,000
3 Air compressor 7 cmm diesel Each 950,000
4 Air compressor 7 cmm electric Each 865,000
5 Air compressor 8.5 cmm diesel Each 1,085,000
6 Air compressor 8.5 cmm electric Each 1,120,000
7 Air compressor 15 cmm electric Each 1,370,000
8 Angle Dozer 90 hp Each 5,475,000
9 Batching plant 0.5 cum with accessories Each 1,200,000
10 Batching plant 2 x 1.00 cum with accessories Each 4,245,000
11 Batching plant 2 x 1.50 cum with accessories Each 5,425,000
12 Bending machine Each 530,000
13 Clamp shell and hoisting ropes Each 30,000
14 Concrete bucket 1.5 cum Each 56,000
15 Concrete hand mixer 45/30 ltr Each 15,500
16 Concrete mixer 300/200 ltr(diesel) Each 150,000
17 Concrete mixer 300/200 ltr ( electric ) Each 145,000
18 Concrete mixer 600/400 ltr(diesel) Each 260,000
19 Concrete mixer 600/400 ltr ( electric ) Each 255,000
20 Concrete paver 100 Sqm / hr Each 2,361,000
21 Convey mucker ( excluding tyres ) Each 3,855,000
22 Core drilling machine Each 1,100,000
23 Diesel generating set 30 KVA Each 495,000
25
Sl S. Rate for
No. 2016-17
24 Diesel generating set 50 KVA Each 640,000
25 Diesel Loco 45 hp Each 2,120,000
26 Dewatering pump 5 hp diesel Each 40,000
27 Dewatering pump 5 hp electric Each 24,500
32 Drifter Each 1,058,000
33 Drilling jumbo ( excluding tyres ) Each 1,302,000
34 Dumper 4.5 cum ( excluding tyres ) Each 1,450,000
35 Geophysical Ele.resistivity meter Each 475,000
36 Grouting pump Each 102,000
37 Guniting / sand blasting equipment Each 280,000
38 Ice plant with accessories 30 t / day Each 2,280,000
39 Jack hammer Each 65,000
40 Needle vibrator 40 mm petrol Each 20,000
41 Needle vibrator 40 mm electric Each 21,000
42 Needle vibrator 60 mm petrol Each 21,500
43 Needle vibrator 60 mm electric Each 25,500
44 Planing machine 4 m stroke Each 780,000
45 Plate shearing machine up to 12 mm Each 425,000
46 Pneumatic placer 0.5 cum Each 580,000
26
Sl S. Rate for
No. 2016-17
47 Pneumatic tamper Each 85,000
48 Pug cutting machine Each 16,000
49 Pusher leg Each 52,000
50 Road roller diesel 10 t Each 850,000
51 Shovel 0.50 cum 75 hp Each 3,750,000
52 Shovel 0.85 cum 110 hp Each 6,380,000
53 Stationery derrick crane 5 t Each 653,000
54 Tipper 5 cum ( excluding tyres ) Each 1,625,000
55 Tipping tub 1.5 cum Each 240,000
56 Tower crane 5 tonne Each 7,475,000
57 Transformer 250 KVA Each 425,000
58 Truck 10 t ( excluding tyres ) Each 1,475,000
59 Truck mounted derrick crane 5 t ( excluding tyres ) Each 1,960,000
60 Upright drilling machine Each 56,000
61 Ventilation fan 20 hp Each 260,000
62 Vibratory pad foot roller 8 t Each 2,950,000
63 Wagon drill Each 650,000
64 Water tanker 8000 ltr (excluding tyres) Each 1,422,000
65 Welding set Each 48,000
66 Winch 35 hp electric Each 375,000
67 Hydraulic Truck Crane 30T Each 14,484,250
27
Sl S. Rate for
No. 2016-17
68 Hydraulic Truck Crane 16T Each 10,390,875
69 Heavy Duty Airless Spray Painting Equipment Each 487,770
ACCESSORIES TO MACHINERY / EQUIPMENT

Sl S. Rate for
No. 2016-17
1 Casing shoe bit Each 10,500
2 Diamond core bit BX size Each 10,600
3 Diamond core bit NX size Each 12,720
4 Double tube core barrel Each 13,704
5 Extension drill rod with coupling sleeve Rm 2,226
6 Jack hammer drill rod 1.5 m Each 4,150
7 Jack hammer drill rod 2.5 m Each 6,400
8 Nozzle for Guniting / sand blasting gun Each 700
9 Paving Cylinder Each 28,080
10 Rails 30R ( 30 kg / m ) tonne 52,530
11 Reamer shell Each 5,150
12 T.C. Cross bit 50 mm dia Each 5,000
15 Tyres and Tubes for truck Set 18,000
16 Wire rope 16 mm dia Rm 265
28
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT

1 The rate provided for ' SUNDRIES' ( Lumpsum provision for unquantified inputs in the
data rates ) shall be updated on the basis of general percentage increase / decrease in
the market rates or on the basis of R.B.I ' All Commodity' index.
2 The rate for structural steel fabrication shall include cost of all materials (except
structural steel ), machinery, labour and one coat of primer painting.
3 Demand charges and electric power charges shall be as per prevailing TSCPDCL tariff.
4 Rate of interest on capital cost shall be as approved by Govt or other competent
authority.
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for 2016-
No.
17
1 Air hose 25 mm dia Rm 185
2 Air hose 50 mm dia Rm 298

Demand charges (HT-I : General-11 KVA category) on power KVA /
3 350
supply month
4 Diesel Ltr 58.72
Electric power (HT-VIII Category) including tax (1.5 times

5 Kwhr 8.6
of the Tariff of HT-I(A): General-11 KVA category)
6 Excise duty on Gates / Hoist supplies % 0%
%/
7 Insurance charges on machinery 0%
annum
%/
8 Interest on capital cost 11.00%
annum
9 Lubricants Ltr 230
10 Petrol Ltr 66.29
11 Rivets Kg 100
As per
12 Road tax on transport vehicles Rs./annum
RTA
13 Shalimastic sealing compound Kg 105
14 Shutter oil Ltr 30
15 Structural steel fabrication Kg 24
16 Sundries ( Lump sum for un quantified inputs ) LS 20
17 Water hose ( pressure ) 20 mm dia Rm 185
18 Steel wedges LS 16
29
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for 2016-
No.
17
19 Elbows / Nipple / Plugs etc., LS 17
20 Soldering materials LS 17
21 Steam circulation arrangement LS 17
22 Fuel charges ( gas for heating ) LS 17
23 Vulcanizing materials LS 17
28 Gas cutting set ( 2 Nos 15 m hose and nozzle unit ) Each 14250
29 Grease Kg 275
30 Welding holder set ( cable / holder / gloves / mask etc ) Each 7800
31 Use rate of ropes LS 150
MATERIALS FOR GATES AND HOISTS

Sl S. Rate for
No. 2016-17
1 Worm reducers Each 224,400
2 Electric motor 20 hp(Double Shaft) Each 121,000
3 Electric motor 17.5 hp(Double Shaft) Each 85,800
4 Electric motor 12.5 hp(Double Shaft) Each 72,600
5 Electric motor 5 hp(Double Shaft) Each 33,000
6 Electric motor 3 hp (Double Shaft) Each 23,100
7 Electric motor 2 hp (Double Shaft) Each 12,100
8 Floating shaft 300 mm dia Kg 180
9 Manual operating system Each 28,820
10 Gate position indicator Each 195,800
11 Ele-magnetic brake Each 35,200
12 Electric cable / switch / control panel etc LS 50,380
13 Wire rope sockets Each 4,620
30
HIRE CHARGES
31
Machinery Hire Charges Common SoR 2016-17
32
HIRE CHARGES OF PLANT & MACHINERY FOR THE YEAR: 2016-17
Fuel Crew
Hire charge Total in
S.No Description of machinery Unit charge in Charge in
in Rs Rs
Rs Rs.
1 2 3 4 5 6 7
Agitator car / Transit mixer 2
1 Hour 745.50 888.10 285.50 1919.10
cum
Air compressor 5 cmm (
2 Hour 105.80 259.80 164.80 530.40
electric )
3 Hour 237.00 726.70 210.90 1174.60
diesel )
4 Hour 128.90 346.40 164.80 640.10
electric )
Air compressor 8.5 cmm (
5 Hour 270.70 908.30 210.90 1389.90
diesel
Air compressor 8.5 cmm (
6 Hour 167.00 433.10 164.80 764.90
electric)
7 Hour 134.00 962.30 175.80 1272.10
electric)
8 Angle Dozer 90 hp Hour 1690.40 621.30 237.90 2549.60
Batching plant 0.5 cum( 6
9 Hour 110.80 115.50 342.50 568.80
cum/hr)
Batching plant 2 x 1.00
10 Hour 392.00 346.40 342.50 1080.90
cum(15 cum/hr)
Batching plant 2 x 1.50
11 Hour 500.90 423.40 342.50 1266.80
cum(50 cum/hr)
Bending machine 3000 x 12
12 Hour 41.20 115.50 131.80 288.50
mm
Clamp shell and hoisting
13 Hour 5.40 0.00 0.00 5.40
ropes
14 Concrete bucket 1.5 cum Hour 15.60 0.00 0.00 15.60
Concrete hand mixer 45 / 30
15 Hour 5.50 0.00 0.00 5.50
ltr
Concrete mixer 300 / 200 (
16 Hour 52.80 80.70 219.70 353.20
diesel)
Concrete mixer 300 / 200 ltr
17 Hour 51.00 38.50 219.70 309.20
( electric)
Concrete mixer 600 / 400 (
18 Hour 91.40 161.50 219.70 472.60
diesel)
Concrete mixer 600 / 400 ltr
19 Hour 89.70 77.00 219.70 386.40
( electric
20 Concrete paver 100 sqm / hr Hour 346.50 0.00 421.80 768.30
21 Convey mucker Hour 807.60 267.90 175.80 1251.30
22 Core drilling machine Hour 312.80 242.20 285.50 840.50
23 Diesel generating set 30 KVA Hour 64.50 645.90 131.80 842.20
24 Diesel generating set 50 KVA Hour 83.40 968.90 131.80 1184.10
25 Diesel Loco 45 hp Hour 374.30 545.00 164.80 1084.10
Dewatering pump 5 hp (
26 Hour 10.00 80.70 111.10 201.80
diesel )
27 Hour 2.90 38.50 83.30 124.70
electric )
33
Fuel Crew
in Rs Rs
Rs Rs.
28 Hour 15.00 161.50 111.10 287.60
diesel )
29 Hour 6.60 77.00 83.30 166.90
electric
30 Hour 47.40 323.00 111.10 481.50
diesel )
31 Hour 11.90 154.00 83.30 249.20
electric
32 Drifter Hour 315.40 0.00 356.90 672.30
33 Drilling jumbo Hour 362.80 43.60 175.80 582.20
34 Dumper 4.5 cum Hour 573.50 406.90 228.40 1208.80
Geophysical Electric
35 Hour 97.60 0.00 0.00 97.60
resistivity meter
36 Grouting pump Hour 24.30 38.50 263.60 326.40
Guniting / sand blast
37 Hour 108.70 0.00 219.70 328.40
equipment
Ice plant & accessories 30 t /
38 Hour 164.20 1097.10 131.80 1393.10
day
39 Jack hammer Hour 19.40 0.00 329.60 349.00
Needle vibrator 40 mm (
40 Hour 7.60 18.20 158.20 184.00
petrol )
41 Hour 7.90 7.70 158.20 173.80
electric )
42 Hour 8.10 27.30 158.20 193.60
petrol )
43 Hour 9.60 11.50 158.20 179.30
electric )
44 Planing machine 4 m stroke Hour 114.50 115.50 210.90 440.90
Plate shearing machine upto
45 Hour 40.80 154.00 142.70 337.50
12 mm
46 Pneumatic placer 0.5 cum Hour 168.90 0.00 86.80 255.70
47 Pneumatic tamper Hour 20.30 0.00 263.60 283.90
48 Pug cutting machine Hour 6.30 3.80 0.00 10.10
49 Pusher leg Hour 12.40 0.00 0.00 12.40
50 Road roller diesel 10 t Hour 193.40 726.70 210.90 1131.00
51 Shovel 0.50 cum 75 hp Hour 985.90 484.40 237.90 1708.20
52 Shovel 0.85 cum 110 hp Hour 1677.40 888.10 237.90 2803.40
53 Stationery derric crane Hour 83.90 0.00 0.00 83.90
54 Tipper 5 cum Hour 440.50 305.20 178.40 924.10
55 Tipping tub 1.5 cum Hour 63.30 0.00 0.00 63.30
56 Tower crane 5 tonne Hour 840.90 200.20 190.30 1231.40
57 Transformer 250 KVA Hour 4852.10 0.00 0.00 4852.10
58 Truck 10 t Hour 408.30 305.20 178.40 891.90
34
Fuel Crew
in Rs Rs
Rs Rs.
Truck mounted derric crane 5
59 Hour 512.30 305.20 178.40 995.90
t
Upright drilling
60 Hour 22.10 38.50 200.90 261.50
machine/Grinder
61 Ventilation fan 20 hp Hour 11.20 154.00 28.70 193.90
62 Vibratory pad foot roller 8 t Hour 1325.70 1049.60 263.60 2638.90
63 Wagon drill Hour 184.80 0.00 285.50 470.30
64 Water tanker 8000 ltr Hour 396.90 305.20 178.40 880.50
65 Welding set Hour 15.60 92.40 0.00 108.00
66 Winch 35 hp ( electric ) Hour 127.30 188.60 263.60 579.50
67 Tractor with 2T roller Hour 345.00
68 Hydraulic Truck Crane 30T Hour 3032.40 118.80 527.90 3679.10
69 Hydraulic Truck Crane 16T Hour 2231.40 75.00 527.90 2834.30
Heavy Duty Airless Spray

70 Hour 120.30 120.30
Painting Equipment
35
36
Conveyance Charges of Materials Common SoR 2016-17
CONVEYANCE
CHARGES OF MATERIAL
37
38
CONVEYANCE CHARGES OF MATERIALS AS PER SoR 2016-17

(COMMON TO ALL DEPARTMENTS)
LEAD, LIFT, LOADING AND UNLOADING CHARGES FOR MATERIALS FOR THE
YEAR: 2016-17
1. For total lead up to 150 m (including initial lead) lead charges by head load only
shall be adopted irrespective of mode of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be
adopted irrespective of mode of conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire
charges per for each kilometer and up to 5 km are cumulative and inclusive of
total charges for Preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates
and Stones are for loose volume and not for compacted or in-situ volume.
5. The rates for lift charges, lead charges, hire charges are cumulative and inclusive
of rates for preceding lift, lead and hire charges.
6. Lift charges are not payable where conveyance of materials is by mechanical

means to final placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for
disposal of excavated materials beyond initial lead of 50 m wherever specified.
9. Loading and unloading charges are not payable for conveyance by mechanical
means for disposal of excavated materials beyond initial lead of 1 km wherever
specified.
10.The rates for unloading of materials except earth, sand, gravel, coarse
aggregate, rubble, size stone and cut stone are inclusive of stacking.
11.Hire charges are per 1KM for tippers and trucks for transport of materials from
work site to dump yard and other places are cumulative& includes previous km
up to 5 kms
12.The lead & lift charges are inclusive of contractor's profit and overhead charges
of 13.615%
13. During the BoCE meeting held on 26-05-2016, it is observed that in

some of the estimates, Lead Charges are being added directly to the
material basic rates for arriving the finished item rate. In view of that,
39
the BoCE has instructed to see that while arriving the finished item
rate, the lead charges are to be added to the material basic rates only
after deducting the provision of "Contractor's Profit and Overhead
charges"
A. (LEAD) CONVEYANCE CHARGES FOR MATERIALS BY HEAD LOAD FOR THE
YEAR: 2016-17
Earth / Sand /Gravel Cement / PCC slab/
/ Murrum/ Lime/ Reinforc Shahbad slab /
Total
Surki/ Size stone / e- ment CC block/ BS
distance Cut stone Rubble /
( Total lead includes steel Str slab/ Late-rite /
Coarse aggregate
initial lead ) steel Wood Rs /
Rs/Cum
Sl No. Rs / tonne cum
1 2 3 4 5
Total lead up to 50 m
(covered by item rate)
1 initial lead initial lead initial lead
2 Total lead up to 100 m 56.30 33.10 72.30
3 Total lead up to 150 m 113.60 66.30 144.60
Notes: 1. No loading or unloading charges are admissible for conveyance by head

load.
2. For total lead exceeding 150 m conveyance charges by mechanical means
only shall be adopted irrespective of mode of conveyance.
3. The lead & lift charges are inclusive of 13.615% Contractor Profit
and Over Head charges
B. (LEAD) CONVEYANCE CHARGES FOR MACHINERY PER KILOMETER FOR
TRANSPORTING MATERIALS BY TIPPERS AND TRUCKS EXCLUDING
LOADING, UNLOADING AND IDLE HIRE CHARGES OF MACHINERY FOR THE
YEAR: 2016-17
(No loading and unloading charges allowed for machinery loading and unloading)
(Lead) (Lead) (Lead) (Lead)

(Lead) charges for charges for charges for charges
charges for trucks and trucks and trucks and for (Lead)
tippers for tippers per trucks charges
trucks and tippers for
Cement/ and for
Sl tippers for Rubble/Size cu.meter
trucks
No. Distance Steel/ RCC for PCC tippers
Earth / Sand stones/ Cut per
poles/ AC & slabs/ per 1000
/Gravel / Stones/ Shahabad cu.met nos. of
Murrum/ GI sheets/
Coarse slabs/ CC & er bricks
Lime/ Surki/ Packed
aggregate per Laterite water/
per cu.meter
materials/ blocks/ 1000
cu.meter
tonne Wood/ cum litres
1 2 3 4 5 6 7 8
1 Lead up to 1 km 31.50 30.40 19.00 44.70 18.80 50.70
2 Lead up to 2 km 44.10 42.60 26.60 62.60 26.30 70.90
40
3 Lead up to 3 km 58.80 58.80 36.70 86.50 35.00 94.60

4 Lead up to 4 km 71.40 71.40 44.60 105.00 42.50 114.80
5 Lead up to 5 km 84.00 84.00 52.50 123.50 50.00 135.10
for Every km
beyond 5 km up
to 12.60 12.60 7.90 18.50 7.50 20.30
30 km
6 for Every km 10.50 10.50 6.60 15.40 6.30 16.90
beyond 30 km
7
Note: The lead & lift charges are inclusive of 13.615% Contractor
Profit and Over Head charge
C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (idle hire

charges of trucks are not added)
Earth Rubble/
/ size stone/
Sand
/Gravel cut stone/
Sl No. Description of item Cement in Steel in Brick
Murrum/ Coarse
/ Surki/ Rs/tonne Rs./tonne work
aggretgate,
Rs / Rs/100
Lime in
cum 0 No
Rs/cum
1 2 3 4 5 6 7
1 Loading 18.90 37.80 62.40 74.80 52.00
2 Unloading 9.45 18.90 62.40 74.80 52.00
Note: The lead & lift charges are inclusive of 13.615% Contractor Profit and
Over Head charges.
D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS

(including idle hire charges of trucks)
Earth Rubble/
/ size stone/
Sand Brick
/Gravel cut stone/ work
Sl No. Description of item Cement in Steel in
Murrum/ Coarse Rs/100
/ Surki/ Rs/tonne Rs./tonne
aggretgate, 0
Rs / Lime in No
cum Rs/cum
1 2 3 4 5 6 7
1 Loading 111.00 129.90 163.70 176.10 219.20
2 Unloading 40.00 64.95 163.70 176.10 219.20
Over Head charges.
41
E.LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS

(including idle hire charges of trucks)
Earth Rubble/
/ size stone/
Sand
cut stone/
Sl No. Description of item /Gravel
Murrum/ Coarse
/ Surki/ aggregate,
Rs / cum Lime in
Rs/cum
1 2 3 4
1 Loading 51.90 103.60
2 Unloading 15.90 15.90
Over Head charges
F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD
Earth / Sand
/Gravel Cement / PCC slab/
Total lift
Murrum/ Reinforce Shahbad
Sl (Total lift
includes initial lift Lime/ Surki/ - ment slab / CC
No. Size stone /
) steel Str block/ BS
Cut stone steel slab / Laterite
Rubble / / Wood
Coarse Rs / tonne
Rs / cum
aggregate
Rs / cum
1 2 3 4 5
Total lift up to 3 m
(covered by item rate) Initial lift Initial lift Initial lift
1
2 For Every 1.00 Lift
beyond initial lift of 6.60 4.80 8.80
3 meters
Over Head charges
42
ROADS & BRIDGE
WORKS
Index
PART-II
Roads & Bridge Works
S.No Description
1 Preamble
2 Labour Rates
3 Materials & Work Item Rates
Hire Charges of Plant & Machinery for Roads & Bridge
4
Works
PREAMBLE
PREAMBLE
I.0 AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:
a) 25% extra over the rates on labour component of works is allowed in all
Municipal Corporation Limits of Telangana State except Greater
Hyderabad, (Upto a belt of 12 kms from Municipal corporation limits) and
other corporations as notified by the Government from time to time.
(ii) 40% extra over the rates on labour component of works for Greater
Hyderabad, Corporation limits (Upto a belt of 12 kms from Municipal
corporation limits)
b) Allow 20% extra over basic rates on labour component of works in all
District Headquarters and the remaining Municipal limits ( up to a belt of
12 Kms. from Municipal limits ).
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds.
Only e q u i v a l e n t number of Man Mazdoor shall be provided in the Jail premises
and no women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works
situated within 10 Kms belt of Industrial area of, Jeedimetla,
Lingampally,Ibrahimpatnam, Tandur in Ranga Reddy District, Kothur in
Mahabubnagar District,Patancheru, Ramachandrapur in Medak District, Bibinagar in
Nalgonda District,Ramagundam and Godavarikhani in Karimnagar District,
Manchiryal,Mandamarri, Bellampalli in Adilabad District, Sarpaka, Kothagudem,
Paloncha,Manguguru, Singareni Collieries in Khammam District, Kamalapur,
Bhoopalpally of Warangal District, Wadepally of Nalgonda District,
Nagapally(Centenary Colony, Begumpet X roads) Takkalapally of
Karimnagar District.
D) AGENCY / TRIBAL AREAS:
a) 25% extra allowed for the works located within the interior Agency/Tribal
limits, i.e. for the works located within & upto16 KMs from any all
weather routes inside Agency / Tribal.
b) 40% extra allowed for the works located within the interior Agency /
Tribal limits, i.e. for the works located beyond 16 KMs from any all
NOTE: 1. No extra percentage is permissible in respect of Forest produce such
as Bamboo, Rellu grass and for all materials obtained from outside the
Agency / Tribal.
2. The extra percentage under Agency / Tribal areas allowance may be

allowed on the labour component and on the labour charges in
the rates for c o n v e y a n c e of materials.
3.The extra percentage on cost of materials in Agency / Tribal areas can

be allowed on the labour component only, if they are manufactured
in the Agency / Tribal areas itself except Forest produce.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken
as 1.5 times the existing length of the road for the purpose of leads only for
conveyance of materials based on the certificate for the Ghat Road given by the
Superintending Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief

Engineer can adopt the equivalent length of road as 2 times
of actual length.
Note below area allowances:
If more than one area allowance ( such as those ) for (1) Municipalities (2)
Agency / Tribal areas (3) Industrial areas are applicable for a particular situation,
only the maximum out of the allowable percentages is to be allowed.
2.0 WATER LEADS:
The following labour is allowed for conveyance of water for every

Kilometer lead or part there of over the initial lead of kilometer.
a) Cement concrete : 1.5 Women
Mazdoor/cum Cum. b) Masonry :
1.0 Woman Mazdoor/ Cum.
c) Plastering : 0.5 Woman Mazdoor/ 10 Sq.m
Note:- For Water leads of over 2 KMs, specific approval of Chief Engineer concerned
is necessary.
3.0 EXCAVATION OF TRIAL TRENCHES,

TRIAL PITS AND EXCAVATION IN
RESTRICTED PLACES: -
I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND

EXCAVATION IN RESTRICTED PLACES: -
A. TRIAL TRENCHES:
1) Trial trenches of not more than 2 metres in width 25% extra
B. TRIAL PITS:
1) Up to 2 Metres depth 25% extra

2) 2 Metres to 4 Metres depth 50% extra
6) More than 9 Metres depth 200% extra
II) EXCAVATION IN RESTRICTED PLACES:-
I) Foundation of Buildings . 75% extra

II) For pipe lines where the depth is less
.. 75% extra than 1.5 times the width
III) For pipe lines where the depth is . 120% extra
1.5 times or more than the width
IV) Silt removal in restricted areas such 120% extra

U. Ts., Culverts and Syphons.
V) Excavation of field channels 75% extra
VI) For narrow trenches not more than

2 meters in width and depth not less
than twice the width and for excavation 75% extra
of road boundary drains, model sections
of canals.
VII)High berm cutting of not more than 50% extra

150 mm average thickness and
sectioning for roads
Note: 1) The extra percentage is allowed over rate for corresponding soil. It
includes the charges for all lifts and initial lead but does not include
dewatering charges if any in respect of all the items under ( A) and (B)
above.
2) The above extra percentages in respect of excavation in hard rock for

restricted places are to be allowed for (2/3) rd of the cost and shall
not to be allowed in respect of items involving blasting component
which may be taken as 1/3 of the cost.
4.0 Proportion of First class and 2nd class workmen under Skilled
Labour:
30% of the skilled labour provided in the data may be taken as 1st Class
and the remaining 70% as 2nd Class.
5.0 Revetment and apron works:
I) The size of stone for the volume range ( 0.015 to 0.030 Cum)
shall not be less than (0.30 X 0.30 X 0.15 to 0.30 X 0. 225 X
0.225m)
II) The size of stone for the volume range (0.011 to 0.015 Cum)
shall not be less than (0.30 X 0.225 X 0.15 to 0.225 X 0.225 X 0.
225 m)
III) The rate of labour component as per the standard data book is to
be adopted for revetment work only. However for apron work
Rs. 3.00 per cum should be deducted.
IV) For the labour for the Rock Toe shall be taken as 2/3rd of the
labour charges of revetment as Chief Engineer, Circular No. P3/
OT2/ T3/ 65167/78, Dt: 19.03.1980.
7.0 The conveyance of bitumen for bulk and packed may be admitted
as follows:
Packed --- Rs. 1.75per Km/ MT

Bulk --- Rs. 1.50 per Km/ MT (round the trip)
8.0 SEIGNIORAGE CHARGES:
Seigniorage charges for materials as fixed by the Government in

G.O.Ms.No.67 (industries and commerce department), dated 26.09.2015 may be
added in the data of rates in the estimate. The Provision towards Contractor's
Profit and Overhead charges should not be operated on the Seigniorage
Charges while adding Seigniorage Charges to the data in the estimate. In
case of revision, the revised rates as fixed by Mines and Geology Department have
to be adopted.
9.0 EARTH WORK EXCAVATION BY MACHINERY:
For items of Earth work excavation by machinery, the rates shall be

adopted as per MoRTH Standard Data.
Sl.n S.S. Description Unit SoR Rate for Remarks
o Ite m (Per) 2016-17
No.
1 2 3 4 6 7
(A) SKILLED WORKMEN
First Class
1a Mason and stone As per I&CAD
Day 445
cutter (S.No.39)
2b Brick Layer As per I&CAD
Day 445
(S.No.11)
3c Carpenter As per I&CAD (S.No.4)
Day 480
4d Painter As per I&CAD
Day 515
(S.No.35)
5e Plumber As per I&CAD
Day 515
(S.No.36)
6f Welder As per I&CAD
Day 445
(S.No.41)
7g Fitter As per I&CAD (S.No.6)
Day 480
8h Electrician As per I&CAD (S.No.5)
Day 515
9 1 Cook As per I&CAD (S.No.2)
Day 410 Other Category
10 2 Mechanic As per I&CAD

Day 480
(S.No.12)
11 5 Well Sinker Day 480
12 6 Blaster As per I&CAD (S.No.3)
Day 515
13 3 Barbender As per I&CAD (S.No.1)
Day 565
14 7 Tipper and Heavy As per I&CAD
Vehicle Driver (S.No.15)
Day 515
above 12 T
15 Road Roller Driver As per I&CAD

(7.5 T to 12 T) Day 445 (S.No.27)
Operator
16 Concrete Mixer As per I&CAD
Day 445
(S.No.16)
17 Vibrator As per I&CAD
Day 445
(S.No.32)
18 Jack Hammer As per I&CAD
Day 445
(S.No.23)
19 Driller As per I&CAD
Day 515
(S.No.34)
20 11 Pump operator As per I&CAD
Day 445
(S.No.24)
o Ite m (Per) 2016-17
No.
1 2 3 4 6 7
21 13 Wireless Operator As per I&CAD
Day 510 (S.No.12)
Other Category
22 15 Jeep Driver As per I&CAD
Day 500 (S.No.15)
Other Category
23 16 Work Inspector As per I&CAD (S.No.9)
with I.T.I Day 510 Other Category
qualification
with LCE, LME,L.E.E Other Category
Day 650
qualification

with B.E (Civil Other Category
Mechanical and Day 870
Electrical
qualification
26 19 Work Inspector As per I&CAD
with Non-technical (S.No.10)
qualification Day 460
SSLC/SSC/HSC
27 27 Typist/Job Typist As per I&CAD

a(i) Day 510 (S.No.13)
Other Category
28 a (ii) Computer operator As per I&CAD
Day 560 (S.No.11)
Other Category
29 b "CAD Operator with As per I&CAD
Diploma in (S.No.14)
Engineering Other Category
Day 700
/General degree
with CAD
certificate"
(B) SEMI SKILLED WORKMEN -
SECOND CLASS
30 1 Mason As per I&CAD

Day 405 (S.No.35)
Semi-Skilled
31 b Brick Layer and 405 As per I&CAD
Stone Cutter Day (S.No.35)
Semi-Skilled
32 c Carpenter As per I&CAD (S.No.4)
Day 405 Semi-Skilled
o Ite m (Per) 2016-17
No.
1 2 3 4 6 7
33 d Painter As per I&CAD
Day 405 (S.No.37)
Semi-Skilled
34 10 Telephone Operator As per I&CAD
Day 510 (S.No.12)
Other Category
35 13 Hammer Man As per I&CAD
Day 400 (S.No.40)
Semi-skilled
36 17 Stone Packer Day 450
37 1 Head Mazdoor As per I&CAD
(Mukaddar) Day 400 (S.No.10)
Semi Skilled
(C) UNSKILLED WORKMEN
38 2 Man Mazdoor As per I&CAD (S.No.3)
Day 350 Un-Skilled
39 3 Watch Man As per I&CAD (S.No.5)

Day 350 Un-Skilled
40 5 Woman Mazdoor As per I&CAD (S.No.4)

Day 350 Un-Skilled
Note : Whenever unskilled workmen are engaged for cleaning of Sewers &
Septic Tanks, they may be paid double of the above wages.
(D) OTHER CONVEYANCE ITEMS

41 1 Single bullock with As per I&CAD (S.No.6)
driver and cart Day 430 Semi Skilled
2 Bullock pair with Day Item may be

driver deleted
42 3 Bullock pair with As per I&CAD (S.No.5 )
driver and cart Day 460 Semi Skilled
43 6 Nava with crew As per I&CAD (S.No.3)

Day 420 Semi Skilled
Note :-
1) The wage should not be less than the minimum wages of schedule of
employment, subject to out turn.
2) 25% extra over the corresponding labour rates in respect of the work to be done
during night time subject to issue of certificate accordingly by the concerned estimate
sanctioning authority for providing in the data and by concerned Executive Engineer in
charge of the work for payment. The night time allowance is applicable only to the
works done under Greater Hyderabab Muncipal Corporation only.
SoR Rate
Sl. S.S. Item
Description Unit for Remarks
No No.
2016-17
1 2 3 4 6 7
(A) STONE AND ROAD MATERIALS
ROUGH STONE QUARRIED INCLUDING WEDGING,
BREAKING,BURNING, SPLITING
1 22.a For R.R Masonary Work (other than Granite, Dolomite and Trap 1 cum Retained as per
160
SoR 2015-16
2 b.I For SS Revetment work 225 mm 1 cum 160 do
3 b.ii For SS Revetment work 300 mm 1 cum 164 do
4 b.iii For SS Revetment work450 mm 1 cum 136 do
5 c Jeddy Stone above 450 mm to 600 mm 1 cum 188 do
6 d I. Laterite for revetment 225 mm 1 cum 118 do
7 d II. Laterite for revetment 300 mm 1 cum 138 do
8 d.iii Granite for SS revetment 225 mm 1 cum 154 do
9 d.iv Granite for SS revetment 300 mm 1 cum 156 do
Note:- Only when other than granite is not available
10 e Laterite for masonry 1 cum 136 do

11 f Cyclopean stones above 0.2 cum 1 cum 254 do
12 g For R.R.Masonry works ( granite, dolamite and trap variety) 1 cum do
including loading & unloading 252
13 NOTE:- For items 22(a) to 22 ,22d.iii,22d.iv 22(f) and 22(g) add 1 cum do
extra Rs /cum, wherever quarrying is done by blasting 70
COURSED RUBBLE STONE QUARRYING WEDGING,

BREAKING, BURNING AND SPLITTING FOR SS FIRST
SORT WORKS
14 23.a Granite, dolamite and trap 1 cum 262 do
15 b For other varieties 1 cum 188 do
16 27 Granite stone slabs for culverts, lintels and copings (3 faces 1 cum do
1728
dressed coarsed rubble masonry)
17 NOTE: - For items 23(a), 23(b) and 27 add extra Rs. Per Cum, 1 cum do
74
wherever quarrying is done by blasting
18 28 Bond stones ( 600 x 200 x 200 mm ) each 30 do
19 b Chainage stones and Centre line stones (750x150x150xmm) each do
37
29 (a) Kilometers stones ( 1100 x 370 x 250 mm) each Based on
detailed
b 5th Kilometers stones ( 1520 x 520 x 250 mm) each analysis as
30 (a) Hectometers stones ( 900 x 200 x 200 mm) each per MoRTH
Data
20 31 Demarcation Stones ( 900 x 150 x 150 mm) each 70 do
21 32.a Guard Stones ( 1200 x 200 x 200 mm ) each 102 do
22 b Guide Stones ( 800 x 150 x150 mm ) each 70 do
23 c Carving letters and figures in stone up to 100 mm size each 8 do
24 d Carving letters and figures in stone above 100 mm size each 9 do
HARD BROKEN STONE OF GRANITE, TRAP AND DOLERITE
FREE FROM DUST OBTAINED BY QUARRYING, WEDGING,
BREAKING, BURNING AND SPLITTING .
25 33.a - do - 6mm size (IS383,1970) 1 cum 532 do

26 b - do - 10mm size (IS383,1970) 1 cum 692 do
27 c - do - 12mm size (IS383,1970) 1 cum 822 do
28 d - do - 20mm size (IS383,1970) 1 cum 916
29 e - do - 25mm size (IS383,1970) 1 cum 874
30 f - do - 40mm size (IS383,1970) 1 cum 532
31 g - do - 50mm size (IS383,19705) 1 cum 456 do
32 h - do - 60mm size (IS383,1970) 1 cum 419 do
33 I - do - 65mm size (IS383,1970) 1 cum 379 do
34 j - do - 75mm size (IS383,1970) 1 cum 304 do
35 k - do - 75 to 100mm size (IS383,1970) 1 cum 248 do
36 NOTE:- (1) Add extra Rs. /- per cum for items 33 (a) to 33 (k) if do
70
the metal is obtained by blasting
37 (2) Add 25% extra per cum if the metal is obtained by machine do
25%
crushing excluding cost of blasting.
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
38 (3) Deduct Rs. /- per cum if the metal or rubble is obtained from do
9.9
surface stone and boulders.
39 (4) Add Rs. /- per cum for selection of stones and boulders from do
excavated spoil dumps for items 33 a to 33 k, when this addition
of Rs. /- per Cum is allowed deduction of Rs. /- per Cum 17
mentioned under Note (3) above should invariably be made.
SOFT BROKEN STONE SCREENED AND FREE FROM DUST
40 33.l - do - 40 mm size ( IS383,1970 ) 1 Cum 123 do

41 33.m - do - 50 mm size ( IS383,1970 ) 1 Cum 111 do
42 33.n - do - 60 mm size ( IS383,1970 ) 1 Cum 87 do
43 33.o - do - 65 mm size ( IS383,1970 ) 1 Cum 78 do
44 33.p - do - 75 mm size ( IS383,1970 ) 1 Cum 73 do
HARD BROKEN STONE OF GRANITE TRAP DOLERITE AND
DOLAMITE FREE FROM DUST OBTAINED BY QUARRYING
WEDGING, BREAKING, BURNING AND SPLITTING
(QUARTZITE AND BASALT WITH AGGREGATE IMPACT OF
LESS THAN 20)
45 33a -do- 2.36 mm to 5 mm size ( IRC, MORTH &MORD) 1 cum 320

b -do- 5 mm to 7 mm size ( IRC, MORTH & MORD) 1 cum 504 do
46 c -do- 9.5 mm to 11.2 mm size ( IRC, MORTH & MORD) 1 cum 656 do
47 d -do- 12mm to 14 mm size ( IRC, MORTH & MORD) 1 cum 717
48 e -do- 19 mm to 22 mm size ( IRC,MORTH & MORD ) 1 cum 864
49 f -do- 25 mm to 27 mm size ( IRC,MORTH &MORD ) 1 cum 824
50 g -do- 40 mm to 45 mm size ( IRC , MORTH &MORD) 1 cum 500
51 h -do- 50 mm to 55 mm size ( IRC,MORTH & MORD ) 1 cum 456 do
52 i -do- 60 mm to 63 mm size ( IRC, MORTH &MORD) 1 cum 419 do
53 j -do- 65 mm size ( IRC ,MORTH &MORD ) 1 cum 379 do
54 k -do- 75 mm size ( IRC,MORTH &MORD) 1 cum 304 do
55 1 NOTE:- Add extra Rs. /- per cum for items 33 (a) to 33 (j) if the 1 cum do
70
metal is obtained by blasting
56 2 Add 25% extra per cum if the metal is obtained by machine 1 cum do
25%
crushing excluding cost of blasting.
57 3 Deduct Rs. /- per cum if the metal or rubble is obtained from 1 cum do
9.9
surface stones and boulders
58 4 Add Rs. /- per cum for selection of stones and boulders from 1 cum do
excavated soil dumps for items 33 (a) to 33 (k), when this
addition of Rs. /- per cum allowed deduction of Rs. /- per cum 17
mentioned under note (3) above should invariably be made
HARD BROKEN STONE OTHER THAN GRANITE SUCH AS

QUARTZ, QUARTZ-NAPA AND BASALT SCREENED AND
FREE FROM DUST
59 33.q - do - 10 mm size (IS383,1970) 1 Cum 386 do
60 -do- 9.5 mm to 11.2 mm size ( IRC,MORTH & MORD ) 1 Cum 386 do
61 r - do - 12 mm size (IS383,1970) 1 Cum 362 do
62 -do- 12mm to 14 mm size ( IRC , MORTH & MORD ) 1 Cum 362 do
63 s - do - 20 mm size (IS383,1970) 1 Cum 293 do
64 -do- 19 mm to 22 mm size ( IRC,MORTH & MORD ) 1 Cum 293 do
65 t - do - 25 mm size (IS383,1970) 1 Cum 287 do
66 u - do - 40 mm size (IS383,1970) 1 Cum 170 do
67 -do- 40 mm to 45 mm size ( IRC , MORTH & MORD) 1 Cum 170 do
68 v - do - 50 mm size (IS383,1970) 1 Cum 150 do
69 -do- 50 mm to 55 mm size ( IRC,MORTH &MORD) 1 Cum 150 do
70 33.w - do - 65 mm size (IS383,1970) 1 Cum 142 do
71 -do- 60 mm to 65 mm size ( IRC, MORTH &MORD) 1 Cum 142 do
72 x - do - 75 mm size (IS383,1970) 1 Cum 117 do
73 - do - 75 mm size ( IRC ,MORTH & MORD) 1 Cum 117 do
74 y - do - 75 to 100 mm size (IS383,1970) 1 Cum 92 do
75 - do - 75 to 100 mm ( IRC, MORTH & MORD) 1 Cum 92 do
OTHER ITEMS
76 33.z1 Laterite 40 to 75 mm ( ring) 1 Cum 101 do
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
77 z2 kankar, hard broken kankar 40 to 75 mm ( ring ) 1 Cum 75 do
78 z3 Soling stone of 150 mm size of granite, trap and Dolamite 1 Cum do
varieties. 95
79 NOTE:- (1) Add extra for items to 33(z3) Rs /- Per cum, 1 Cum do
wherever quarrying is done by blasting. (2) Wherever controlled
blasting is resorted to the Chief Engineer concerned shall approve 70
the observed data in support of SS item No. 22 a to 22 c , 22g, 23
80 z4 Soling stone of 150 mm size other than granite variety 1 Cum 66 do

81 z5 Soling Stone laterite, Kankar 150mm, surface stone 1 Cum 41 do
82 z6 Field picked metal unbroken 20 mm size 1 Cum 55 do
83 z7 - do - 25 mm size 1 Cum 42 do
86 z10 - do - 60 mm size 1 Cum 36 do
87 z11 - do - 80 mm size 1 Cum 32 do
88 NOTE:- Add Rs. /- Per Cum for selection of stone and boulders from do
excavated spoil dumps for items 33 (Q) TO 33 Z , when this addition of Rs.
/- Per cum is allowed deduction of Rs. /- per cum should invariably be 17
made towards the metal or rubble if it is obtained from surface stone and
boulders.
89 34 Gravel 1 Cum 103 do

90 35 a Quarry rubbish 1 Cum 81 do
91 b HBG Stone Chips 2.36mm and below 1 Cum 360
92 36.a Sand for mortar, ceiling coat including washing screening etc., 1 Cum As per I&CAD
760 S.No 28 of
Materials
93 36.b Sand for Concrete 1 Cum As per I&CAD
560 S.No 27 of
Materials
94 36.c Sand for filling and blindage 1 Cum As per I&CAD
560 S.No 27 of
Materials
95 37 Clay for puddle and masonry Items 38 (a) to 39 (h) As per local 1 Cum do
prevailing rates based on competitive quotations. 35
(C) LIME AND CEMENT

96 40 to 41(c
)
97 42 Cement excluding cost of empty cement bags Metric Monthly
Tonne Rates will
be
communic
ated by
Govt.
NOTE: (1) The rate is material at site ( No conveyance charges to be allowed) 2)As
per the rates applicable to the District. 3) Least of the (1) and (2 ) above may
allowed 4) The price of cement will be reviewed and fixed on monthly basis as per
G.O.Ms.No.94 T,R&B Dept Dt16-4-2008 and rates will be communicated separately.
98 42.a Labour for mixing cement mortar 1 Cum Based on

detailed
99 b Mixing of cement mortar by machine 1 Cum
analysis as
per MoRTH
100 c Grinding lime mortar or Surkhi mortar 1 Cum 94 do
101 d Shell lime slaked and screened 1 Cum 940 do
102 e White cement 1 Kg. As per building
31
SSR 2016-17
(D) MORTARS
103 43 to 45 Items 43 to 45
(E) METAL AND IRON WORKS
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
104 Mild steel rods 6mm dia. One
Metric
Tonne
105 Mild steel flats One
Metric Monthly
Tonne Rates will
106 Mild Steel, Structural Steel, I.e., Angles, Channels and I sections. One
be
Metric
communica
Tonne
ted by
107 High Yield Strength Deformed Bars One
Govt.
Metric
Tonne
108 Mild Steel Plates One
Metric
Tonne
NOTE: (1) The rate are inclusive of sales tax. 2) As per the rates applicable to the
District. 3) Least of the (1) and (2 ) above may allowed 4) The prices of steel will be
reviewed and fixed on monthly basis as per G.O.Ms.No.94 T,R&B Dept, Dt 16-4-2008
and rates will be communicated separately.
III RATES OF WORKS

(A) CLEARING SITE
109 1.a Clearing heavy Jungle 1 Sqm Based on
110 b Clearing light Jungle 1 Sqm detailed
111 c Clearing Scrub Jungle 1 Sqm analysis as
per
112 d Clearing Juliflora (Prosafis) jungle including up-rooting and 1 Sqm do
3.7
removing of Juliflora stumps.
113 2.a.I Cutting and removing Palmyrah trees including stacking of girth Each do
19
30 to 100 cm.
114 ii - do - 100 to 200 cm. Each 44 do
115 2.b.I Uprooting and removing Palmyrah stumps including stacking of Each do
46
girth 30 to 100 cm.
116 ii - do - 100 to 200 cm. Each 48 do
117 2.c.I Cutting and removing date trees including stacking of girth 30 to Each do
24
100 cm
118 ii - do - 100 to 200 cm Each 35 do
119 d.I Uprooting and removing stumps of date trees including stacking Each do
24
of girth 30 to 100 cm.
120 ii - do - 100 to 200 cm Each 30 do
121 eI Cutting and removing other kind of trees including stacking of Each do
30
girth 30 to 100 cm
122 ii - do - 100 to 200 cm Each 46 do
123 iii - do - above 200 cm Each 75 do
124 f.I Uprooting and removing stumps of other kind of trees including Each do
24
stacking of girth 30 to 100 cm.
125 ii - do - 100 to 200 cm Each 33 do
126 iii - do - above 200 cm Each 41 do
127 3.a Uprooting and clearing prickly pear jungle 1 Sq.m do
2.3
128 b - do - under 2.5 meters height including burning and burying as 1 Sq.m do
3
directed.
129 c - do - over 2.5 meters height including burning and burying with 1 Sq.m do
3.5
an initial lead of conveyance
130 4.a Removing of natchu, goobi, thooti etc., from drains, channels 1 Sq.m do
including clearance if not more than 1 metre depth of water with
1.9
an initial lead of 10 metres and lift of 2 metres.
131 b.I Clearing alchi, tilla 1 Sq.m do

3.8
132 b.ii Removal of Jammu 1 Sq.m do
3.3
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
133 c.I Removal of imponea, cornea 1 Sq.m do
3.6
134 c.ii Removal of water hyacinth up to 30 cm thick. 1 Sq.m do
3.7
135 c.iii - do - more than 30 cm thick 1 Sq.m do
5
136 d Removal of natchu, goobi, thooti etc., for every extra lead or lift 1 Sq.m do
1.4
over the initial lead or lift.
(B) DISMANTLING
5 DISMANTLING, CLEARING AWAY MATERIALS USEFUL
FOR REUSE.
137 n.(i) Dry rough stone revetment for aprons and stacking within 40 1 cum 62.5
metres
(C) QUARRYING AND BLASTING
138 6 Blasting and removing hard granite measured in solid 1 cum Based on
detailed
analysis as
per MoRTH
Data
7 Drilling holes in hard granite or sheet rock

a) Manually ( Hand)
139 I) 20 mm dia meter 1 RM 124 do
140 ii) 25 mm dia meter 1 RM 131 do
141 iii) 36 mm dia meter 1 RM 151 do
b) Pneumatic Compressor
8 Grouting the holes with neat cement slurry excluding cost
of steel
(D) EARTH WORK
148 NOTE:- 1. Standard Specification No.20-A requires breaking
clods, ramming and sectioning of spoil bank etc., -
149 2. Standard Specification No.20-B does not require that three

items of work detailed above, but does require neat banking in
-
accordance with the standard specification.
150 3. A separate rate for these three items of work will not be
necessary where the earth work is executed under the standard -
specification No. 20-A.
151a Allowances for Excavation and Forming Embankment:
-
(I) Top soil removal - up to 5% -
(ii)Consolidation allowance to Proctor's Density - 10% -
(iii)Shrinkage Allowance - 2 to 2.5% -
(iv)Wastage- 1% -
(v)Allowance for removal of boulders - Nil -
151b Conveyance by Lorries not applicable to head leads
-
(vi) Clay 25% -
loamy, Red Earth, Gravel, Homogeneous soils-
-
18%
(vii) Allowance for compaction and Shrinkage- 12 to
-
12.5%
EARTH WORK EXCAVATION AND DEPOSITING ON BANK
WITH AN INITIAL LEAD OF 10 METRES AND AN INITIAL
-
LIFT OF 2 METRES IN CASE OF HEAD LEAD ONLY.
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
152 8.a Sand or loose soils wet sand not under water, silt in canals, 1 cum
-
channels and drains SS 20-A.
153 b - do - 20-B 1 cum
154 9.a Loamy and Clayey soils like black cotton soils, red earth and ordinary1gravel
cum SS 20-A.
155 b - do - 20-B 1 cum
156 10.b Slushy soil and silt clearance up to 0.60 metres depth SS 20-B 1 cum
157 11.b Clayey Soil in wet and slushy condition SS 20-B 1 cum
158 12.a Hard Gravelly Soils SS 20-A 1 cum
159 b - do - SS 20-B 1 cum
160 13.a Mixture of gravel and soft disintegrated rock like shales ordinary 1 cum
gravel, stoney earth and earth mixed with fair sized boulders Based on
SS 20-A detailed
161 b - do - 20-B 1 cum analysis
as per
162 14 Soft disintegrated rock ( removable by pick axes and crow bars) 1 cum MoRTH
Data
163 15 Stone matrix 1 cum
164 16 Hard disintegrated rock or soft rock or conglomerate rock etc., 1 cum
removable by pick axes and crow bars
165 17 Hard disintegrated rock or soft rock or conglomerate rock and 1 cum
Hard lime kankar requiring partial blasting.
166 18.a.I Fissured and fractured rock and boulders up to 3 cum in size 1 cum
requiring blasting including stacking
167 a.ii - do - Stacking is not done 1 cum
168 18.b.I Excavation of Nandyal Slabs more than 3 cum in size requiring 1 cum
blasting including stacking
169 b.ii - do - Stacking is not done 1 cum
Based on
170 19.a.I Hard rock and boulders more than 3 cum in size requiring blasting 1 cum detailed
including stacking analysis
171 a.ii - do - Stacking is not done 1 cum as per
MoRTH
a.iii Hard rock and boulders more than 3 cum in size wherever 1 cum Data
quarrying is done by controlled blasting.
a.iv - do - Stacking is not done 1 cum
172 19.b Benching, chiseling, wedging and boring in rock in foundation 1 cum
grade levelling.
FOR ALL SOILS, SOFT DISINTEGRATED ROCK AND STONE
MATRIX (ITEM N0s 8-b to 15 ABOVE ) -
173 20.a.I Extra for every additional 10 metres lead or part there of over the 1 cum
initial lead for the first 3 extra leads
174 ii -do- from 4 th extra lead to 6 th extra lead 1 cum
175 iii -do- from 7 th extra lead to 9 th extra lead 1 cum Based on
FOR HARD DISINTEGRATED ROCK (ITEM 16 TO 17 ABOVE detailed
) analysis
176 20bi (Extra for every additional 10 metres lead or part there of) over 1 cum as per
the initial lead for the first 3 extra leads MoRTH
177 ii Extra for every additional 10 mtrs. Lead or part there of from 4 1 cum Data
th extra lead to 6 th extra lead
178 iii -do- from 7 th extra lead to 9 th extra lead 1 cum
FOR FISSURED AND FRACTURED HARD ROCK AND

-
BOULDERS ETC., (ITEM 18 & 19 a ABOVE)
179 20.c.I (Extra for every additional 10 metres lead or part there of) over 1 cum Based on
the initial lead for the first 3 extra leads detailed
180 ii Extra for every additional 10 mtrs. Lead or part there of from 4 1 cum analysis
th extra lead to 6 th extra lead as per
181 iii -do- from 7 th extra lead to 9 th extra lead 1 cum MoRTH
Data
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
FOR ALL SOILS, SOFT DISINTEGRATED ROCK AND STONE
MATRIX (ITEM N0s 8-b to 15 ABOVE ) -
182 21.a.I Extra for every additional 1 metre lift or part there of over the 1 cum Based on
initial lift for the first 3 extra lifts detailed
183 ii Extra for every additional 1 mtrs. lift or part there of from 4 th 1 cum analysis
extra lift to 6 th extra lift as per
184 iii -do- from 7 th extra lift and above 1 cum MoRTH
Data
FOR HARD DISINTEGRATED ROCK (ITEM 16 & 17 ABOVE )
-
185 21.b. I Extra for every additional 1 metres Lift or part there of over the 1 cum Based on
initial lift for first 3 extra lifts detailed
186 ii Extra for every additional 1 mtrs. lift or part there of from 4 th 1 cum analysis
extra lift to 6 th extra lift as per
187 21.b.iii -do- from 7 th extra lift and above 1 cum MoRTH
Data
FOR FISSURED AND FRACTURED, HARD ROCK AND
-
BOULDERS ETC.,(ITEM 18 TO 19 a ABOVE ).
188 21.c.I Extra for every additional lift of 1 metre or part there of over the 1 cum Based on
initial lift for the first 3 extra lifts detailed
189 ii Extra for every additional lift of 1metre or part there of over from 1 cum analysis
4th extra lift to 6 th extra lift as per
190 iii -do- from 7 th extra lift and above 1 cum
Note: The lift charges mentioned in SS item Nos 21a,21 b, and

21c under (D) Earth work are applicable to delifts also.
191 22.a Add to relevant SS 20-A rates for new tank bunds, closing 1 cum
breaches, road formation and embankments for extra watering
and consolidation by stone roller up to 1 tonne.
192 b - do - with stone roller 2 tonnes or cattle treading 1 cum
193 b(I) Add to relevant SS 20-A rates for new tank bunds, closing 1 cum
and consolidation by pneumatic tampers at 90% proctor's density.
194 c Add to relevant SS 20-A rates for new tank bunds, closing 1 cum
and consolidation of proctor's density with 8 to 10 tonne power
roller including watering and conveyance of water for initial lead
of 1/2 Kilometer. Based on
195 Note: The element of Hire charges is Rs 51.76 per 10 cum detailed
corresponding to the hire charges of 8 to 10 Tonne power roller analysis
fixed at Rs. 2200 /- per day of 8 hours. The rate shall be as per
increased when the element of hire charges increases for item MoRTH
No. 22 c above, if the roller is lent to the contractor at a rate of Data
Rs 275/- per hour (i.e.,) Rs 2200 /- per day of 8 hours may be
effected.)
196 22.d Extra for every additional 1/2 km lead for water over the initial 1 cum
lead of 1/2 Km for consolidation of banks .
197 23.a Benching old embankment slopes 0.45 x 0.45 metres. 1 RM
198 23.b Puddle wall work 1 cum
199 24 Turfing slopes including watering for 3 months with initial lead for 1 Sq.m
conveyance of water and grass for 1 hectometer.
200 25 Refilling with the excavated sand complying with the standard 1 cum
specifications for filling foundations
201 26.a Refilling with the excavated soils ( other than sand) complying 1 cum
with the standard specifications for filling foundations.
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
202 b Trimming of slopes of embankments and depositing the soils on 1 cum
the top of the bank.
203 c Ploughing 1 Sq.m
(E) CONCRETE AND (G) STONE MASONRY -

203 SSI NOS 31a to 39 and SSI Nos. 60 to 87
Note:
204 1. Add for vibrating concrete 1 cum
205 2. Add for machine mixing of concrete. 1 cum
206 3.Add where the power is available for operating the mixer, the 1 cum Based on
rate is, detailed
207 aI White washing and colour banding for guard and guide stones each
analysis
including cost of materials
as per
208 bI Screening sand and gravel 1 cum
MoRTH
209 b2 Screening chips and metal 1 cum
Data
210 c1 Removing and refixing Hectometer or Demarcation stones each
CENTERING CHARGES
211 L1 Centering charges for culvert slabs and other structures of 3 mts. 1 cum
span and above
212 L2 Centering charges for bed blocks and culvert slabs and other 1 cum
structures of less than 3 mts. span.
CENTERING CHARGES FOR MINOR AND MAJOR BRIDGE
-
WORKS
213 L3 For mass concrete piers, abutments and steining well curbs, well 1 cum
caps etc.,
214 L4 For RCC piers, abutments, wing wall, steining, well curbs, well 1 cum
caps etc., Based on
215 NOTE:- The rates under L3 and L 4 are applicable to Roads and detailed
Buildings and Irrigation structures up to 2 metres width analysis
as per
216 L 5 For RCC deck slabs 1 cum MoRTH
217 L 6 For RCC beams 1 cum Data
218 L 7 For RCC hand rails 1 cum
219 L 8 For CC pavements, wearing coats, approach, slabs, guide stone, 1 cum
J. M. stone etc.,
n Laying and fixing RCC Hume pipes in position including
lifting, aligning etc., complete with (fixing ) collars for the
following diametres of pipes but excluding cost of -
materials ( NP2 Class )
220 n 1 250 mm diameter 1 Rm

221 n 2 300 mm diameter 1 Rm
222 n 3 450 mm diameter 1 Rm Based on
223 n 4 600 mm diameter 1 Rm detailed
224 n 5 750 mm diameter 1 Rm analysis
225 n 6 800 mm diameter 1 Rm as per
226 n 7 1000 mm diameter 1 Rm MoRTH
227 n 8 1220 mm diameter 1 Rm Data
228 Note:- For NP3 class 50% extra over the rates of NP2. Class may
be allowed.
(S ) ROAD WORK ITEMS
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
PICKING OLD METALLED SURFACE TO DEPTH OF 40 TO
100 mm SPREADING OLD METAL AND NEW METAL
SECTIONING INCLUDING EDGEBUNDS AND SUBGRADE
ROLLING, SPREADING METAL INCLUDING BLINDAGE
OFGRAVEL WATERING WITH AN INITIAL LEAD OF 2
HECTOMETERS AND HAND ROLLER ( 1.5 TO 2 TONNES)
ROLLING ETC., INCLUDING BARRICADING,DIVERSION OF
TRAFFIC AND WETTING THE NEW CONSOLIDATION FOR A
FORTNIGHT COMPLETE.
( For a compact thickness )

1 (I ) HARD METAL
229 a 40 mm thickness 10 sqm
Based on
230 b 50 mm thickness 10 sqm detailed
analysis
231 c 75 mm thickness 10 sqm as per
MoRTH
232 d 100 mm thickness 10 sqm Data
1 (ii ) For compact thickness of soft metal

233 a 50 mm thickness 10 sqm
234 b 75 mm thickness 10 sqm Based on
235 c 100 mm thickness 10 sqm
detailed
236 2 Picking 5 to 100 mm old metalled surface and sectioning 10 sqm
analysis
as per
237 3 Picking gravelled surface 25 mm deep and levelling and 10 sqm
MoRTH
sectioning
Data
238 4 Picking the existing B.T. surface and removal of chips 10 sqm
239 5 Picking old metalled surface to a depth of 40 to 100 mm

and spreading metal including watering with an initial
lead of 2 Hectometers and rolling with power rollers
watering and spreading gravel for blindage and power
roller rolling including hire charges of power roller rolling
including hire charges of power roller ( 8 to 10 T)
barricading and diversion of traffic and wetting the new
consolidation for a fortnight ( for compacted thickness of
)
HARD METAL
240 5 (a) 40 mm thickness 10 sqm
241 (b) 50 mm thickness 10 sqm Based on

detailed
242 (c ) 75 mm thickness 10 sqm analysis
as per
243 (d ) 100 mm thickness 10 sqm MoRTH
Data
244 (e) 150 mm thick excluding hire charges 10 sqm
Spreading gravel watering with an initial lead of 2

hectometers and power roller ( 8 to 10 T ) rolling
excluding hire charges of power roller and barricading
etc., ( for a compact thickness of )
245 6a 50 mm thickness 10 sqm

-
246 b 75 mm thickness 10 sqm
-
247 c 100 mm thickness 10 sqm
-
SoR Rate
Sl. S.S. Item
No No.
2016-17
1 2 3 4 6 7
248 d 150 mm thickness 10 sqm
-
249 7a Blinding the road surface 6 mm thick with gravel or sand 10 sqm
available at site after remaining loose stones including -
watering.
250 b -do- without watering 10 sqm
-
251 8a Blinding the road surface 6 mm thick with gravel or sand 10 sqm
-
dug from road site including watering.
252 b -do- without watering 10 sqm
-
253 Spreading gravel sand including watering and roller
-
rolling ( for compacted thickness of )
254 9a -do- 6mm to 20 mm thick 1 cum -
255 b -do- from 20 to 25 mm thick 1 cum -
256 c -do- from 25 to 40 mm thick 1 cum -
257 d -do- from 40 to 50 mm thick 1 cum -
258 10 Picking 50 to 100 mm Old metalled surface, spreading metal and 10 sqm
blindage watering tamping for patch repairs ( labour only ) -
259 11 Picking old metalled surface 50 to 100 mm deep spreading gravel 10 sqm
-
watering and tamping ( labour only )
260 12 Levelling ruts and tamping gravelled roads 10 sqm
-
261 13 Levelling ruts and tamping metalled roads 10 sqm
-
262 14 Spreading gravel or sand including watering and rolling with hand 10 cum
-
roller irrespective of thickness in layer
263 15(I) Carrying for water for WBM consolidation metal and blindage of 10 sqm
40 to 150 mm thickness for every one hectometer beyond initial
-
lead of 2 hectometers beyond initial lead of 2 hectometers
(ii) Rate towards the cost of water to be consumed for Cement 1 sqm
Concrete Roads(including curing) under Greater Hyderabad
Municipal Corporation limits only, subject to issue of certificate by
-
the concerned Executive Engineer in charge of the work that
water required for the work is to be purchased from other source.
264 Gelatin(For MORTH data,for works of state & national high ways Per Kg
only)
265 Electric Detonators(For MORTH data,for works of state & national each
high ways only)
Rate as per
266 Hot applied thermoplastic compound(For MORTH data, for works Per
local
of state & national high ways only) Litre
Market
267 Reflectionising glass beads of 2 mm thick(For MORTH data, for Per Kg
works of state & national high ways only)
268 Road marking paint confirming to IS 164(For MORTH data, for Per Kg
works of state & national high ways only)
BAILING OUT WATER CHARGES FOR CD & CM WORKS
-
(WHEREVER REQUIRED)
267 I 14 For earth work excavation for foundations below low water level 1 cum Based on
detailed
268 I 15 For cement concrete for foundation below low water level 1cum analysis
as per
269 n Labour charges for laying filters with coarse aggregate. 1 cum MoRTH
270 o Labour charges for laying filter with sand. 1 cum Data
271 Jute Rope Mtr 8.75 do

272 De bonding Strips Mtr 11 do
273 Selent Ltr 69.5 do
274 Ply sheet 125 micron 1 Sqm 18 do
275 Rural water table 1 kl 77 do
Hire Charges
Sl. Description Remarks
Unit for 2016-17
No.
Machine Activity ( Rupees)
1 2 3 4 6 7
1 Dozer( D 80 ) Spreading Per Hour 2561.8 Retained
Cutting as per SoR
Cleaning 2015-16
2 Dozer( D 50 ) Spreading Cutting Cleaning Per Hour 1570 do
3 Mortor Grader Clearing Per Hour 3216 do

Spreading
GSB
WMM
4 Hydraulic Excavator Soil Ordinary Per Hour 2821.5 do
Soil Marshy
Soil unsuitable
5 Front end loader Soil loading Per Hour
1646 do
Aggregate loading Per Hour
Per Hour 924.1 As per
I&CAD S.No.
54 (Hire
Transportation of soil, Charges)
6 Tipper- 5.5 Cum
GSB,WMM, Hot mix etc
Per Ton 5
per Km
7 Vibratory roller 8 tonne Earth/Soil, GSB, Per Hour 2638.9 As per
WMM I&CAD S.No.
62 (Hire
Charges)
8 Smooth wheeled roller 8 Soil compaction ,BM Per Hour 1131 As per
tonne compaction I&CAD S.No.
50 (Hire
Charges)
9 Water tanker 8 Kilolitre Water transport Per Hour 880.5 As per

I&CAD S.No.
64 (Hire
Charges)
10 Water tanker 6 Kilolitre Water transport Per Hour 624 do

11 Tractor Pulling Per Hour 415 do
12 Tractor with rotavator Scarifying Per Hour 422 do
13 Tractor with ripper Scarifying Per Hour 507.5 do
attachment
14 Air Compressor General purpose Per Hour 521.2 do
15 Wet mix plant 60 TPH Wet mix Per Hour 1646 do
16 Mechanical broom Hydraulic Surface cleaning Per Hour 357 do
17 Bitumen Pressure Applying bitumen tack coat Per Hour 1498 do

Distributor
18 Emulsion Pressure Applying emulsion tack coat Per Hour 860 do
Distributor
19 Hot mix Plant 120 TPH DBM/BM/SDC Per Hour 28175 do
capacity /Premix
capacity /Premix
capacity
Hire Charges
Unit for 2016-17
No.
1
21 Hot mix Plant 2 60 TPH 3 Per 4Hour 6
21668 7
do
capacity /Premix
22 Hot mix Plant 40 to 60 DBM/BM/SDC Per Hour 19120 do
TPH capacity /Premix
23 Paver Finisher Hydrostatic DBM/BM/SDC Per Hour 3059.51 do
with sensor control 100 TPH /Premix
24 Paver finisher Mechanical Paving of WMM, paving of Per Hour 2249 do
100 DLC
25 Hydraulic Chip Spreader Surface dressing Per Hour 2567 do
26 Tandem Road roller Rolling of Asphaltic surface Per Hour 1646 do
27 Pneumatic Road roller Rolling of Asphaltic surface Per Hour 1283 do
28 Pot-Hole repair machine Repair of pot-holes Per Hour 845 do
29 Bitumen boiler oil fired Bitumen Spraying Per Hour 209 do

30 GSB Plant 50 Cum Producing GSB Per Hour 1143 do
31 Mastic Cooker Mastic wearing coat Per Hour 65 do
32 Batching and Mixing Plant Concrete mixing Per Hour 1231.9 do
(a) 30 Cum capacity
(b) 15 - 20 Cum capacity Concrete mixing Per Hour 1080.9 As per

I&CAD S.No.
10 (Hire
Charges)
33 Transit mixer Transportation of concrete Per Hour 1917.5 do

mix
34 Concrete pump of 45 and Pumping of Concrete Per Hour 803 do
30 cum
35 Cranes do
(a) 80 tonnes Lifting purpose Per Hour 1171 do
(b) 35 tonnes 791 do
(c) 3 tonnes 352 do
(d)Crane with grab bucket Well foundation Per Hour 2160 do
0.75 cum
(e)Crane with grab bucket 1 Well foundation Per Hour 3532 do
cum
36 Concrete bucket For pouring concrete Per Hour 15.8 do
37 Kerb casting machine Kerb making Per Hour 311 do
38 Concrete mixer Concrete mixing Per Hour 472.6 As per
(a)0.28 cum I&CAD S.No.
18 (Hire
Charges)
(b) 1.0 cum Concrete mixing Per Hour 649 do

39 Piling rig with bantonite 0.75 m dia to 1.20 m dia Per Hour 5475 do
pump boring attachment
40 Concrete paver finisher with Paving of concrete surface Per Hour 2900 do
40 HP motor
41 Integrated stone crusher Crushing of spalls 100 TPH Per Hour 8712 do
Crushing of spalls 200 TPH Per Hour 18369 do

Hire Charges
Unit for 2016-17
No.
1 2 3 4 6 7
42 Pre stressing jack with Stressing of steel wires/ Per Hour 141 do
pump and access stands
43 Generator
250 KVA Generation of electric per hour 1850 do
125 KVA energy per hour 1320 do
100 KVA per hour 1126 do
30 KVA per hour 842.2 As per
I&CAD S.No.
23 (Hire
Charges)
44 Pneumatic sinking of Plants Pneumatic sinking of wells Per K.m. 56 do
45 Truck tonnes Material transport Per Hour 891.9 As per

I&CAD S.No.
45 (Hire
Charges)
46 Road marking machine Road marking Per Hour 111 do

47 Mobile slurry seal Mixing and laying slurry seal Per Hour 1126 do
equipment
48 Plate compacter For compacting in medians Per Hour 48 do
49 Drilling equipment For drilling Per Hour 828 do

Note: The above hire charges of machinery & plant includes crew, oils, conveyance of machinery to site
and all other incidental charges.
BUILDINGS SoR: 2016-

2017
COMMITTEE OF CHIEF ENGINEERS

1
SCHEDULE OF RATES
FOR
BUILDINGS WORKS

(Effective from 1st June,
2016)
ALL ENGINEERING
DEPARTMENTS
2
Office of the Engineer-in-Chief (R&B)
NH, CRF, LWE & Buildings
Convener-Member,
Committee of Chief Engineers-Buildings-SoR
Procs. No. ENC(B)/DEE1/SAA3/ B-SoR: 2016-17 Dt: 23-06-2016.
Sub:- Printing of Buildings-SoR for all the Engineering Departments specific to the
functioning of Building works Telangana Buildings-SoR:2016-17
Communication of Buildings-SoR Reg.,
Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., Dt:20-04-2007.

2. Minutes of Committee of Chief Engineers meetings for finalizing the Building-
SoRs held on Dt: 14-06-2016.
* * * * *
The Government have constituted a Committee of Chief Engineers of
Engineering departments dealing with Building works for finalizing and
communicating Buildings-SoR (Civil & Electrical) vide G.O. 1st cited. In accordance
therewith the Committee of Chief Engineers has finalized and approved the
Telangana Buildings-SoR: 2016-17 in the Minutes of Meeting held on 14-06-2016.
The rates for the Building items (Civil, Water Supply & Sanitary and
Electrical items) are to be followed henceforth by all the concerned departments
for building works. The rates of Labour Rates, Common Material & Work items,
Public Health items, Conveyance Rates of Materials & Hire charges of Telangana
Common SoR-2016-17 remain unchanged. No other items other than the items
communicated in this Buildings-SoR shall be introduced.
The Heads of Departments mentioned below are authorized to print the

Telangana Buildings-SoR: 2016-17. The unauthorized printing & selling of the
Buildings-SoR is strictly prohibited. The revised rates will come into force with
immediate effect. The receipt of the proceedings may please be acknowledged.
Enclosed: Buildings SoR: 2016-17-CD as above
Sri. I. Ganapathi Reddy

Engineer-in-Chief (R&B)
NH, CRF, LWE & Buildings
Convener-Member,
Committee of Chief Engineers-Buildings-SoR
3
To
1. Engineer-in-Chief (R&B) (Admn & QC), Roads & Buildings Department, Errummanzil,
Hyderabad-82.
2. Engineer-in-Chief (IW) I&CAD, Irrigation Department, Errummanzil, Hyderabad-82.
3. Engineer-in-Chief (R&B) (State Roads, CRN), Roads & Buildings Department,
Errummanzil, Hyderabad-82.
4. Engineer-in-Chief (R&B) (Rural Roads, RDF), Roads & Buildings Department,
Errummanzil, Hyderabad-82.
5. Engineer-in-Chief, (PHE) Public Health Engineering. Department, A,C, Guards,
Hyderabad-4.
6. Engineer-in-Chief (Admn) Panchayat Raj Department, Errummanzil, Hyderabad-82.
7. Engineer-in-Chief, Tribal Welfare & Social Welfare Department, DSS Bhavan, Masab tank,
Hyderabad.
8. Engineer-in-Chief, Greater Hyderabad Municipal Corporation (GHMC), CC
Complex,Tankbund Road Hyderabad
9. Chief Engineer (R&B) (D&P) Roads & Buildings Department, Errummanzil, Hyderabad-
82
10. Chief Engineer (Telangana State Housing Board) Gruhakalpa, Nampally, Hyderabad
11. Chief Engineer (Telangana State Housing Corporation) Urdugally, Himayatnagar,
Hyderabad
12. Chief Engineer (TSSRTC), RTC X Roads, Musheerabad, Hyderabad.
13. Chief Engineer (TSMSIDC), IIIrd Floor, DM&HS Campus, Sultanbazar, Koti, Hyderabad.
14. Chief Engineer (Telangana State Police Housing & Welfare Corporation), Lakdi-ka-pool,
Hyderabad.
15. Superintending Engineer (R&B), Head Quarters Circle, Khairatabad, Hyderabad
16. Superintending Engineer (R&B), Electrical Circle, Errummanzil, Hyderabad-82.
4
INDEX FOR TELANGANA BUILDINGS SoR: 2016-17
Sl.
DESCRIPTION Page No:
No:
From To
TELANGANA BUILDINGS SoR:2016-17
1 Index for Building Civil Items
2 Preamble of Buildings-SoR-2016-17
3 Building Civil Items - Buildings-SoR-2016-17
4 List of Approved brands of Building Civil Items
5 Water Supply & Sanitary Items - Buildings-SoR-2016-17
6 List of Approved brands of Water Supply & Sanitary Items
7 Electrical Items Buildings-SoR-2016-17
8 Common SoR 2016-17
9 PHE SoR 2016-17
5
INDEX FOR CIVIL ITEMS OF TELANGANA BUILDINGS SoR: 2015-16
Sl.
SECTION ITEM CODE DESCRIPTION OF THE ITEM FROM TO
No
A SECTION BRICKS & BUILDING BLOCKS
(Ex-quarry price - including material VAT,
loading excluding cost of conveyance,
unloading & stacking)
I SUB-SECTION TBSC-A.I-01 - 02 ORDINARY CLAY BRICKS
II SUB-SECTION TBSC-A.II-01 -14 FLY-ASH CEMENT/LIME SOLID BLOCKS
III SUB-SECTION TBSC-A.III-01 - 04 AUTOCLAVED CONCRETE BLOCKS
B SECTION NATURAL FLOORING STONES
(Ex-quarry price - including material VAT,
loading excluding cost of conveyance,
I SUB-SECTION TBSC-B.I-01-09 LOCALLY AVAILABLE FLOORING STONES
II SUB-SECTION TBSC-B.II-01-04 NATURAL FLOORING STONES - MARBLE
III SUB-SECTION TBSC-B.III-01-04 NATURAL FLOORING STONES - GRANITE
C SECTION WALL & FLOOR TILES
(Landing cost - including material VAT,
loading, cost of conveyance, unloading &
stacking)
I SUB-SECTION TBSC-C.I-01 -04 NON-PORCELAIN CERAMIC FLOOR TILES
II SUB-SECTION TBSC-C.II-01-16 PORCELAIN VITRIFIED FLOOR TILES
III SUB-SECTION TBSC-C.III-01-03 CERAMIC WALL TILES
IV SUB-SECTION TBSC-C.IV-01-14 PORCELAIN WALL TILES
V SUB-SECTION TBSC-C.V-01-04 GLASS MOSAIC TILES
VI SUB-SECTION TBSC-C.VI-01-04 WALL CLADDING TILES
VII SUB-SECTION TBSC-C.VII-01-03 TERRAZZO FLOOR TILES (PLAIN &
CHEQURED)
VIII SUB-SECTION TBSC-C.VIII-01-08 CEMENT CONRETE FLOOR TILES (PLAIN &
CHEQUERED)
IX SUB-SECTION TBSC-C.IX-01-06 PRE-CAST CONCRETE BLOCKS FOR PAVING
X SUB-SECTION TBSC-C.X-01-03 VINYL FLOORING
D SECTION TIMBER & ROOFING MATERIALS
stacking)
Note: Before proposing the Teak Wood
Items, the estimating authorities shall
obtain prior approval from the competent
authority
I SUB-SECTION TBSC-D.I-01-04 MEDIUM TEAK WOOD
II SUB-SECTION TBSC-D.II-01-04 BEST TEAK WOOD
III SUB-SECTION TBSC-D.III-01-04 BURMA TEAK WOOD
IV SUB-SECTION TBSC-D.IV-01-02 ASSAM TEAK WOOD
V SUB-SECTION TBSC-D.V-01-02 SAL/ COUNTRY WOOD
VI SUB-SECTION TBSC-D.VI-01-19 ROOFING MATERIAL
E SECTION STEEL MATERIALS
stacking)
I SUB-SECTION TBSC-E.I-01-15 MILD STEEL MATERIALS
II SUB-SECTION TBSC-E.II-01-11 GALVANIZED STEEL MATERIALS
III SUB-SECTION TBSC-E.III-01-02 STAINLESS STEEL MATERIALS
6
Sl.
No
F SECTION GLASS MATERIALS
stacking)
I SUB-SECTION TBSC-F.I-01-06 PLAIN GLASS PANES
II SUB-SECTION TBSC-F.II-01-02 PIN HEADED GLASS PANES
III SUB-SECTION TBSC-F.III-01-06 TINTED GLASS PANES
IV SUB-SECTION TBSC-F.IV-01-02 FROSTED/ GROUND GLASS PANES
V SUB-SECTION TBSC-F.V-01-05 TOUGHENED GLASS PANES
G SECTION PAINTS & POLISHES
stacking)
I SUB-SECTION TBSC-G.I-01-19 PRIMERS, FILLERS & BASES
II SUB-SECTION TBSC-G.II-01-04 DISTEMPER PAINTS
III SUB-SECTION TBSC-G.III-01-03 EMULSION BASED PAINTS
IV SUB-SECTION TBSC-G.IV-01-02 SOLVENT BASED PAINTS
V SUB-SECTION TBSC-G.V-01-02 OIL BASED ENAMEL PAINTS
VI SUB-SECTION TBSC-G.VI-01-02 TEXTURE PAINTS
VII SUB-SECTION TBSC-G.VII-01-04 SPECIAL PAINTS
H SECTION PARTICLE BOARDS
stacking)
I SUB-SECTION TBSC-H.I-01-10 MELAMINE FACED PLAIN PARTICLE BOARD
II SUB-SECTION TBSC-H.II-01-06 INSULATING PARTICLE BOARDS
III SUB-SECTION TBSC-H.III-01-52 MEDIUM DENSITY FIBRE BOARDS
IV SUB-SECTION TBSC-H.IV-01-25 CEMENT BONDED PARTICLE BOARDS
J SECTION PLYWOODS, LAMINATES & VENEERS
stacking)
I SUB-SECTION TBSC-J.I-01-07 MOISTURE RESISTANT (MR) GRADE
II SUB-SECTION TBSC-J.II-01-07 BOILING WATER RESISTANT (BWR) GRADE
III SUB-SECTION TBSC-J.III-01-06 VENEERED DECORATIVE PLYWOOD
IV SUB-SECTION TBSC-J.IV-01-06 LAMINATES
V SUB-SECTION TBSC-J.V-01-02 COMMERCIAL VENEERS
K SECTION CEILINGS, WALL PARTITIONS & WALL
LININGS
stacking)
I SUB-SECTION TBSC-K.I-01-30 FALSE CEILINGs - TILES/ SHEETS
II SUB-SECTION TBSC-K.II-01-24 FALSE CEILINGs - SECTIONS &
ACCESSORIES
III SUB-SECTION TBSC-K.III-01-12 WALL LINING & PANELLING
IV SUB-SECTION TBSC-K.IV-01-18 PARTITIONS
L SECTION DOORS, SHUTTERS & FRAMES
stacking)
I SUB-SECTION TBSC-L.I-01-20 DOOR FRAMES
II SUB-SECTION TBSC-L.II-01-26 DOOR SHUTTERS WITHOUT FRAMES
III SUB-SECTION TBSC-L.III-01-28 DOORS WITH SHUTTERS & FRAMES
IV SUB-SECTION TBSC-L.IV-01-04 CUP-BOARD DOORS
7
Sl.
No
M SECTION WINDOWS
stacking)
I SUB-SECTION TBSC-M.I-01-24 OPENABLE WINDOWS
II SUB-SECTION TBSC-M.II-01-13 SLIDING WINDOWS
III SUB-SECTION TBSC-M.III-01-08 VENTILLATORS
N SECTION STRUCTURAL GLAZING & CURTAIN
WALLING
stacking)
I SUB-SECTION TBSC-N.I-01-04 FIXED GLAZING
II SUB-SECTION TBSC-N.II-01-02 STRUCTURAL GLAING
III SUB-SECTION TBSC-N.III-01-01 CURTAIN WALLING
P SECTION FIXTURES FOR DOORS & WINDOWS
stacking)
I SUB-SECTION TBSC-P.I-01-18 TOWER BOLTS
II SUB-SECTION TBSC-P.II-01-18 HINGES
III SUB-SECTION TBSC-P.III-01-14 DOOR HANDLES
IV SUB-SECTION TBSC-P.IV-01-09 ALDROPS
V SUB-SECTION TBSC-P.V-01-08 LATCHES
VI SUB-SECTION TBSC-P.VI-01-04 DOOR CLOSURES
VII SUB-SECTION TBSC-P.VII-01-05 FLOOR SPRINGS
VIII SUB-SECTION TBSC-P.VIII-01-02 MORTICE LOCKS
IX SUB-SECTION TBSC-P.IX-01-09 OTHER ACCESSORIES
Q SECTION CONSTRUCTION CHEMICALS &
ADMIXTURES
Literature for usage / application of
construction / water proofing materials,
epoxies etc, may be obtained from
manufacturers.
I SUB-SECTION TBSC-Q.I-01-06 PLASTICIZERS
II SUB-SECTION TBSC-Q.II-01-06 WATER PROOFING COMPOUNDS
III SUB-SECTION TBSC-Q.III-01-03 BONDING AGENTS
IV SUB-SECTION TBSC-Q.IV-01-04 ANTI-CORROSIVE AGENTS
V SUB-SECTION TBSC-Q.V-01-04 GROUTS
VI SUB-SECTION TBSC-Q.VI-01-18 MISCELLANEOUS CHEMICALS
VII SUB-SECTION TBSC-Q.VII-01-08 REPAIRING & TREATMENT WORKS
VIII SUB-SECTION TBSC-Q.VIII-01-11 EXPANSION JOINTS
R SECTION TBSC-R.I-01-51 MISCELLANEOUS ITEMS
S SECTION TBSC-S.I-01-14 MACHINERY & OTHER HIRE CHARGES
T SECTION TBSC-T.I-01-55 LABOUR CHARGES
U SECTION TBSC-U.I-01-15 DISMANTLING
8
PREAMBLE
9
1.0 INTRODUCTION
Ensuing the state bifurcation the Board of Chief Engineers has decided to have
separate Schedule of Rates specific to the new state of Telangana from this
year. Accordingly the committee comprising of Chief Engineers of departments
in-charge of execution of building works for finalization of Standard Schedule of
Rates for Buildings (Electrical & Civil), constituted vide G.O. Rt. No: 471 TR&B
(R-1) Dept., Dt. 20.4.2007, has agreed to have a separate Schedule of Rates for
Buildings (Civil & Electrical). The 2nd meeting of the above SoR Committee for
Telangana Buildings (Civil & Electrical) was convened on 14-06-2016 with an
objective to finalize and release the first Telangana Buildings-SoR: 2016-17.
2.0 APPLICABILITY OF COMMON SoR 2016-17
The rates of labour, common materials & work items, Public Health items,
conveyance rates of materials &hire charges approved and published in
Common SoR-2016-17 remain applicable. The specifications, stipulations & all
other conditions of Common-SoR other than those specified in this context
remain applicable.
3.0 OVERHEADS & CONTRACTORS PROFIT
a. Over Heads and Contractors Profit @ 13.615% shall be allowed in the data
rates of all the building works where Contractors All Risk policy is
dispensed with.
b. It is reiterated that the provision of Over Heads and Contractors Profit is
applicable to Building works since the advent of the AP. Revised standard
data-2009, which is approved by the Government in G.O.Ms.No.49 I&CAD
(PW-Reforms) Dept., dated: 02-03-2009 and this component shall be
operative on all the data items of the estimates and rates of the finished
items published in Buildings SoR for original works subjected to the
fulfilment of the conditions given below:
i. Site accommodation, setting up plant, access road, water supply,
electricity and general site arrangements.
ii. Office furniture, equipment and communications.
iii. Expenditure on:
a) Corporate office of contractor.
b) Technical agents for site supervision. (Reimbursement to the
technical agents provision is dispensed with where over heads
and contractors profit provision is included in the data rates)
c) Documentation and as built drawings.
d) Mobilization/ de-mobilization of resources.
10
e) Labour camps with minimum amenities and transportation to
work sites.
f) Light vehicles for site supervision including administrative and
managerial requirements.
g) Laboratory equipment and quality control including field and
laboratory testing. (For all the works costing more than Rs.
2.00 Crores contractors have to establish Quality Control
laboratory)
h) Minor T & P and survey instruments and setting outworks,
including verification of line, dimensions, etc.
i) Watch and ward.
j) Traffic management/ Safety management during construction.
k) Expenditure on safeguarding environment.
iv. Sundries.
v. Financing Expenditure.
vi. Sales/ Turn overtax. (This is a material VAT component only, however
the provision towards Works Contract Value Added Tax at 5% or as
applicable on the finished work items as defined in APVAT Act-2005
shall be added in the estimates)
i. Work Insurance/ compensation - Works insurance is dispensed with
vide G.O. Ms. No: 61 Irrigation & CAD (PW:Reforms) Department Dt.
25-06-2013.
4.0 OTHER GUIDELINES
1. Municipal Area Allowance, Agency or Tribal area allowance or any such
allowance on the labour components of civil, water supply & sanitary items
of building works shall be allowed wherever applicable as per the guidelines
and preamble of Common SoR: 2016-17.
2. The Electrical items and corresponding rates as approved and proposed by
the Superintending Engineer (R&B) Electrical shall be considered in the
Buildings SoR-2016-17.
3. The Committee of Chief Engineers has agreed to approve the draft Telangana
Buildings SoR:2016-17 based on the increase in rates of certain materials of
items based on the market rates & Whole Sale Price Indices published by the
Economic Advisor, Government of India.
4. The Committee has resolved to extend the Over Heads and Contractors
Profit @ 13.615% in the data rates of all the building works including all
Electrical and Water Supply & items on all original works subjected to the
11
fulfilment of the conditions given in the Preamble and the Guidelines
published in the AP. Revised standard data-2009, which is approved by the
Government in G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dated: 02-03-2009.
5.0 CONCLUSION
1. The Committee of Chief Engineers on Buildings-SoR: 2016-17 (Civil &
Electrical) has met in the chambers of Chief Engineer (R&B) Buildings, on
14-06-2015 at 3.00 P.M., and approved the Telangana Buildings SoR:2016-
17. The increase in rates of certain materials of items is considered based on
the market rates & Whole Sale Price Indices published by the Economic
Advisor, Government of India.
2. SSR Rates for Civil, Sanitary & water supply items are purely for the guidance
of the officers in preparation of estimates vide Para 113 of APPWD code.
Authority who prepares the estimate is however responsible for proper rates
as envisaged in Para 45 of APPWD code.
3. The rates published in the Buildings SoR are ceiling rates and the estimate
preparing authorities are responsible for the correctness and reasonableness
of the rates and technical specifications adopted in the estimates.
12
CIVIL ITEMS
13
Sl. SS RATE FOR
ITEM CODE DESCRIPTION OF THE ITEM UNIT
No 2016-17
(Ex-quarry price - including material VAT, loading
excluding cost of conveyance, unloading &
stacking)
I SUB-SECTION ORDINARY CLAY BRICKS
1 TBSC-A.I-01 Common burnt clay bricks of class as per Table-1 of Each 5.00
IS:1077-1992 Non-Modular or traditional size 23 x 11
x 7 cm
2 TBSC-A.I-02 Common burnt clay bricks of class as per Table-1 of Each 6.00
IS:1077-1992 Modular or traditional size 19 x 9 x 9
cm
II SUB-SECTION FLY-ASH CEMENT/LIME SOLID BLOCKS
3 TBSC-A.II-01 Fly ash cement/lime solid blocks with compressive Each 25.00
strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5
290 x 225 x 140 mm
290 x 200 x 140 mm
290 x 150 x 140 mm
290 x 112/100 x 140 mm
225 x 100 x 60 mm
145 x 225 x 140 mm
145 x 200 x 140 mm
10 TBSC-A.II-08 Fly ash cement/ lime solid blocks with compressive Each 24.00
strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5
290 x 225 x 140 mm
290 x 200 x 140 mm
290 x 150 x 140 mm
290 x 112/100 x 140 mm
225 x 100 x 60 mm
145 x 225 x 140 mm
14
Sl. SS RATE FOR
No 2016-17
145 x 200 x 140 mm
III SUB-SECTION AUTOCLAVED CONCRETE BLOCKS
17 TBSC-A.III-01 Supply of Aerated (Cellular) Autoclaved Concrete Each 56.00
Blocks conforming to IS:2185 (Part-3) - 1984 and
IS:6441-1972 of Compressive strength 3 N/mm2
(landing cost - including cost of conveyance, loading
& unloading) 600 x 200 x 100 mm
B SECTION NATURAL FLOORING STONES
(Ex-quarry price - including material VAT, loading
excluding cost of conveyance, unloading &
stacking)
I SUB-SECTION LOCALLY AVAILABLE FLOORING STONES
21 TBSC-B.I-01 Shahabad /Tandur Rough Stone slabs of all sizes up 1 Sqm 96.00
to 25 mm in thickness
22 TBSC-B.I-02 Shahabad / Tandur Rough Stone slabs of all sizes 1 Sqm 124.00
between 25 mm - 40 mm thickness
23 TBSC-B.I-03 Polished Shahabad/ Tandur stone slabs of all sizes 1 Sqm 165.00
between 15 - 18 mm thickness
24 TBSC-B.I-04 Kadapa slabs of 40 mm thick of all sizes 1 Sqm 96.00
25 TBSC-B.I-05 Kadapa slabs of 50 mm thick of all sizes 1 Sqm 110.00
26 TBSC-B.I-06 Polished black Kadapa slabs of all sizes between 15 - 1 Sqm 138.00
18 mm thickness
27 TBSC-B.I-07 Polished black Kadapa slabs of all sizes between 25 - 1 Sqm 165.00
30 mm thickness
28 TBSC-B.I-08 Polished White Bethamcherla (marble type) stone of 1 Sqm 386.00
all sizes and between 22-25 mm thickness
29 TBSC-B.I-09 Polished Coloured Bethamcherla (marble type) stone 1 Sqm 276.00
of all sizes and between 22-25 mm thickness
II SUB-SECTION NATURAL FLOORING STONES - MARBLE
30 TBSC-B.II-01 Polished Marble slabs of Dongari/ Adanga/ Marodh/ 1 Sqm 729.00
Rajgangpur etc., variety of thickness between 16 mm
to 20 mm of sizes from 600 mm to 900 mm
15
Sl. SS RATE FOR
No 2016-17
31 TBSC-B.II-02 Polished Marble slabs of Dongari/ Adanga/ Marodh/ 1 Sqm 589.00
Rajgangpur etc., variety of thickness between 16 mm
to 20 mm of sizes up to 600 mm
32 TBSC-B.II-03 Polished Marble slabs of any variety and gang saw cut 1 Sqm 999.00
(Such as Dongari/ Adanga/ Marodh/ Rajgangpur etc)
16 mm to 20 mm (average) thick ( 0.610 M width of
any length)
33 TBSC-B.II-04 Polished Marble Tiles of 8 - 10 mm thickness of all 1 Sqm 476.00
sizes and varieties
III SUB-SECTION NATURAL FLOORING STONES - GRANITE
34 TBSC-B.III-01 High Polished Granite 16 to 18 mm thick up to 8'-00 1 Sqm 3,438.00
(2.43 M) other than black/ premium colours
(2.43 M) other than black and regular colours
(2.43 M) black
37 TBSC-B.III-04 Granite stone tiles 8 mm thick (mirror polished of all 1 Sqm 1,165.00
shades)
(Landing cost - including material VAT, loading,
cost of conveyance, unloading & stacking)
I SUB-SECTION NON-PORCELAIN CERAMIC FLOOR TILES

38 TBSC-C.I-01 Supply of Non-skid red or white full body Ceramic 1 Sqm 450.00
floor tiles of size 300 x 300 mm and thickness
between 7-8 mm 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of any colour and
finish in all shades and designs
between 7-8 mm 1st quality conforming to IS:13711,
between 8-10 mm 1st quality conforming to
IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any
colour and finish in all shades and designs
floor tiles of scratch free-stain free and scratch free-
nano finish of size 600 x 600 mm and thickness
II SUB-SECTION PORCELAIN VITRIFIED FLOOR TILES
42 TBSC-C.II-01 Supply of ordinary soluble salt porcelain vitrified tiles 1 Sqm 530.00
screen printed and polished of size 400 x 400 mm
and thickness between 8-9 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1
to 15) of any colour and finish in all shades and
designs
16
Sl. SS RATE FOR
No 2016-17
43 TBSC-C.II-02 Supply of soluble salt porcelain vitrified tiles screen 1 Sqm 600.00
printed and polished of size 600 x 600 mm and
thickness between 8-10 mm 1st quality conforming
to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any
44 TBSC-C.II-03 Supply of Nano polished /stain free soluble salt 1 Sqm 550.00
porcelain vitrified tiles screen printed of size 600 x
600 mm and thickness between 8-10 mm 1st quality
designs
45 TBSC-C.II-04 Supply of Nano polished soluble salt porcelain 1 Sqm 1,123.00
vitrified tiles screen printed of size 800 x 800 mm and
46 TBSC-C.II-05 Supply of Double charged / multi charged stain free 1 Sqm 940.00
full body porcelain vitrified tiles with double layer
pigment of size 600 x 600 mm and thickness
47 TBSC-C.II-06 Supply of Double charged / multi charged stain free 1 Sqm 1,200.00
48 TBSC-C.II-07 Supply of Double charged / multi charged stain free 1 Sqm 1,522.00
49 TBSC-C.II-08 Supply of digital / polished glazed full body porcelain 1 Sqm 1,039.00
vitrified tiles with any type of design texture such as
marble finish, wooden, bamboo, stone finishes etc.,
scratch less, stain free and of size 800 x 800 mm and
17
Sl. SS RATE FOR
No 2016-17
scratch less, stain free and of size 1000 x 1000 mm
designs
53 TBSC-C.II-12 Supply of full body heavy duty industrial variety 1 Sqm 800.00
porcelain vitrified tile of size 300 x 300 / 200 x 100
mm and thickness between 10-12 mm 1st quality
designs
54 TBSC-C.II-13 Supply of full body heavy duty industrial variety / 1 Sqm 1,210.00
tact porcelain vitrified tile of size 300 x 300 / 200 x
100 mm and thickness between 12-15 mm 1st quality
designs
55 TBSC-C.II-14 Supply of full body heavy duty industrial variety 1 Sqm 1,390.00
porcelain vitrified tile of size 300 x 300 / 200 x 100
mm and thickness between 18-20 mm 1st quality
designs
56 TBSC-C.II-15 Supply of full body heavy duty industrial variety 1 Sqm 550.00
porcelain vitrified tile of size 400 x 400 mm and
thickness between 10 -12 mm 1st quality conforming
57 TBSC-C.II-16 Supply of full body heavy duty industrial variety 1 Sqm 1,391.00
porcelain vitrified tile of size 600 x 600 mm and
thickness between 10 - 12 mm 1st quality conforming
III SUB-SECTION CERAMIC WALL TILES

58 TBSC-C.III-01 Supply of glazed red or white full body ceramic wall 1 Sqm 660.00
tiles of size 200 x 300 mm / 245 mm x 325 mm and
thickness 6 mm 1st quality conforming to IS:13711,
18
Sl. SS RATE FOR
No 2016-17
tiles of size 300 x 450 mm / 320 mm x 400 mm and
thickness 6 mm 1st quality conforming to IS:13711,
tiles of size 300 x 600 mm and thickness between 6-8
mm 1st quality conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour and finish in all
shades and designs
IV SUB-SECTION PORCELAIN WALL TILES
61 TBSC-C.IV-01 Supply of glazed full body porcelain wall tiles of size 1 Sqm 691.00
300 x 600 mm with any type of design texture such as
scratch less, stain free and thickness between 6-8 mm
1st quality conforming to IS:13711, IS:13712,
shades and designs
62 TBSC-C.IV-02 Supply of digital / polished glazed full body porcelain 1 Sqm 691.00
wall tiles of size 300 x 600 mm with any type of
design texture such as marble finish, wooden,
bamboo, stone finishes etc., scratch less, stain free
designs
63 TBSC-C.IV-03 Supply of digital / polished glazed full body porcelain 1 Sqm 795.00
highlighter wall tiles of size 300 x 600 mm with any
type of design texture such as marble finish, wooden,
designs
64 TBSC-C.IV-04 Supply of screen printed glazed full body porcelain 1 Sqm 800.00
wall tiles of size 300 x 600 mm with any type of
design texture such as marble finish, wooden,
designs
65 TBSC-C.IV-05 Supply of glazed full body porcelain wall tiles of size 1 Sqm 986.00
shades and designs
19
Sl. SS RATE FOR
No 2016-17
66 TBSC-C.IV-06 Supply of glazed full body porcelain wall tiles of size 1 Sqm 1,134.00
shades and designs
67 TBSC-C.IV-07 Supply of glazed full body porcelain premium plain 1 Sqm 1,213.00
design highlighter combination floor and wall tiles set
with floor tiles of thickness 14-16 mm and wall tiles
of thickness 8-10 mm but excluding highlighters 1st
quality conforming to IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and finish in all shades
and designs
68 TBSC-C.IV-08 Supply of glazed full body porcelain premium plain 1 Sqm 1,243.00
design highlighter combination floor and wall tiles set
with floor tiles of thickness 14-16 mm and wall tiles
of thickness 8-10 mm but including highlighters 1st
quality conforming to IS:13711, IS:13712, IS:13630
(Parts 1 to 15) of any colour and finish in all shades
and designs
69 TBSC-C.IV-09 Providing and fixing wall dado with epoxy emulsion 1 Sqm 331.00
grout/ synthetic/ resin based adhesive in specified
thick and pointing with specified colour epoxy grout
excluding cost of tiles
70 TBSC-C.IV-10 Providing and fixing wall dado with cement based 1 Sqm 167.00
adhesive in specified thick and pointing with
specified colour epoxy grout excluding cost of tiles
71 TBSC-C.IV-11 Providing and fixing flooring with full depth jointing 1 Sqm 349.00
and pointing to the Vitrified/ Ceramic Tile flooring in
specified thick for tiles of any sizes with epoxy
emulsion grout/ synthetic / resin adhesive in width
of 3-5 mm with Nylon spacers excluding cost of tiles.
and pointing to the Vitrified/ Ceramic Tile flooring in
specified thick for tiles of any sizes with cement
based adhesive in width of 3-5 mm with Nylon
spacers excluding cost of tiles .
and pointing to the Marble/ Granite flooring for any
sizes with epoxy emulsion grout/ synthetic / resin
based adhesive in width of 3-5 mm excluding cost of
tiles.
and pointing to the Marble/ Granite flooring for any
sizes with cement based adhesive in width of 3-5 mm
excluding cost of tiles.
V SUB-SECTION GLASS MOSAIC TILES
20
Sl. SS RATE FOR
No 2016-17
75 TBSC-C.V-01 Supply of glazed full body glass mosaic tiles of 20 x 20 1 Sqm 1,310.00
x 4 mm thick in specified pattern 1st Quality of any
colour and design
76 TBSC-C.V-02 Providing Glass Mosaic tiles using specified pattern 1 Sqm 294.00
fixing in specified thick epoxy emulsion grout of
epoxy resins and filler powder of approved colour
grout including all taxes excluding cost of tiles
77 TBSC-C.V-03 Providing Glass Mosaic tiles using specified pattern 1 Sqm 113.00
fixing in specified thick cementitious powder mix
cement grout and approved colour grout including all
taxes excluding cost of tiles
VI SUB-SECTION WALL CLADDING TILES
78 TBSC-C.VI-01 Supply of glazed full body porcelain tiles for external 1 Sqm 750.00
cladding purposes of any size and thickness between
6-10 mm 1st quality conforming to IS:13711,
79 TBSC-C.VI-02 Supply of glazed red or white full body ceramic tiles 1 Sqm 430.00
for external cladding purposes of any size and
thickness between 5-7 mm 1st quality conforming to
VII SUB-SECTION TERRAZZO FLOOR TILES (PLAIN & CHEQURED)
82 TBSC-C.VII-01 Supplying precast terrazzo tiles conforming to IS: 1 Sqm 288.00

13801 using marble aggregates of size 10 mm , sand,
marble powder, white cement pigments etc., with
terrazzo topping not less than 6 mm of tiles overall
size not less than 20 mm thick white shades.
83 TBSC-C.VII-02 Supplying precast terrazzo plain tiles conforming to 1 Sqm 306.00

IS: 13801 using marble aggregates of size 10 mm ,
sand, marble powder, white cement pigments etc.,
with terrazzo topping not less than 6 mm of tiles
overall size not less than 20 mm thick any coloured
shades.
21
Sl. SS RATE FOR
No 2016-17
84 TBSC-C.VII-03 Supplying precast terrazzo chequered tiles 1 Sqm 314.00
conforming to IS: 13801 using marble aggregates of
size 10 mm , sand, marble powder, white cement
pigments etc., with terrazzo topping not less than 6
mm of tiles overall size not less than 20 mm thick of
any coloured shades.
VIII SUB-SECTION CEMENT CONRETE FLOOR TILES (PLAIN &
CHEQUERED)
85 TBSC-C.VIII-01 Supplying plain Cement Concrete general purpose 1 Sqm 270.00
tiles conforming to IS: 13801 using aggregates,
cement, pigments of size 300 x 300 mm and thickness
20 mm of any shades.
86 TBSC-C.VIII-02 Supplying Chequered Cement Concrete heavy duty 1 Sqm 284.00
91 TBSC-C.VIII-07 Supply of high strength Cement Concrete plain Step 1 Sqm 471.00
tiles with edge half rounded and grooved conforming
to IS: 13801 using aggregates, cement, pigments of
regular colour, design and of 25 mm thickness
92 TBSC-C.VIII-08 Supply of high strength Cement Concrete 1 Sqm 495.00

terrazzo/pre-polished/ chequered Step tiles with
edge rounded and grooved conforming to IS: 13801
using aggregates, cement, pigments of any premium
colour, design and of 25 mm thickness
IX SUB-SECTION PRE-CAST CONCRETE BLOCKS FOR PAVING
93 TBSC-C.IX-01 Supply of precast concrete blocks for paving of M-30 1 Sqm 335.00
grade and thickness not less than 50 mm for Non-
traffic areas conforming to IS 15658:2006 in all
shapes and designs as per the manufacturer's
specification
22
Sl. SS RATE FOR
No 2016-17
grade and thickness not less than 60 mm for Light
specification
grade and thickness not less than 80 mm for Medium
specification
grade and thickness not less than 100 mm for Heavy
specification
grade and thickness not less than 120 mm for very
heavy traffic areas conforming to IS 15658:2006 in all
specification
98 TBSC-C.IX-06 Labour charges for laying & fixing of precast concrete 1 Sqm 207.00
blocks for paving of all grades, any thickness, all sizes
& shapes including all labour charges for loading &
unloading, laying to desired lines and levels complete
excluding cost of cement, sand, water, electricity etc
X SUB-SECTION VINYL FLOORING

99 TBSC-C.X-01 Vinyl Flooring Sheets/ tiles having a nominal total 1 Sqm 850.00
thickness of 2 mm with a wearing surface
impregnated polyurethane homogeneous mixture of
PVC, Plasticizers, Urethane, color pigments with
wearing resistance and Fire Resistance as per
standards
100 TBSC-C.X-02 Vinyl Composition Floor Tiles of size 305 mm x 305 1 Sqm 582.00
mm having an overall thickness of 2.0mm with a
wearing surface impregnated polyurethane
homogeneous mixture of PVC, Plasticizers, Urethane,
color pigments with wearing resistance and Fire
Resistance as per standards
101 TBSC-C.X-03 Vinyl Flooring Sheets or tiles having a nominal total 1 Sqm 421.00
thickness of 1.5 mm with a wearing surface
impregnated polyurethane homogeneous mixture of
PVC, Plasticizers, Urethane, color pigments with
wearing resistance and Fire Resistance as per
standards
D SECTION TIMBER & ROOFING MATERIALS
23
Sl. SS RATE FOR
No 2016-17
Note: Before proposing the Teak Wood Items, the
estimating authorities shall obtain prior approval
from the competent authority
I SUB-SECTION MEDIUM TEAK WOOD
102 TBSC-D.I-01 Medium Teak Wood scantlings: up to 2.0 M 1 cum 80,094.00
103 TBSC-D.I-02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 88,994.00
104 TBSC-D.I-03 Medium Teak Wood scantlings: above 3.0 M 1 cum 97,894.00
105 TBSC-D.I-04 Medium Teak Wood Planks: any thickness 1 cum 1,60,189.00
II SUB-SECTION BEST TEAK WOOD
106 TBSC-D.II-01 Best Teak Wood scantlings: up to 2.0 M 1 cum 1,37,941.00
107 TBSC-D.II-02 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,46,840.00
108 TBSC-D.II-03 Best Teak Wood scantlings: above 3.0 M 1 cum 1,55,740.00
109 TBSC-D.II-04 Best Teak Wood Planks: any thickness 1 cum 1,73,539.00
III SUB-SECTION BURMA TEAK WOOD
110 TBSC-D.III-01 Burma Teak Wood scantlings: up to 2.0 M 1 cum 1,89,545.00
111 TBSC-D.III-02 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,94,959.00
112 TBSC-D.III-03 Burma Teak Wood scantlings: above 3.0 M 1 cum 2,05,056.00
113 TBSC-D.III-04 Burma Teak Wood Planks: any thickness 1 cum 2,22,040.00
IV SUB-SECTION ASSAM TEAK WOOD
114 TBSC-D.IV-01 Assam Teak Wood scantlings: any length 1 cum 50,812.00
115 TBSC-D.IV-02 Assam Teak Wood Planks: any thickness 1 cum 73,679.00
V SUB-SECTION SAL/ COUNTRY WOOD
116 TBSC-D.V-01 Sal Wood scantlings: any length 1 cum 49,394.00
117 TBSC-D.V-02 Sal Wood Planks: any thickness 1 cum 65,861.00
VI SUB-SECTION ROOFING MATERIAL
118 TBSC-D.VI-01 A.C sheet Corrugated 6 mm thick 1 Sqm 222.00
119 TBSC-D.VI-02 A.C sheet plain 4 m thick 1 Sqm 159.00
120 TBSC-D.VI-03 A.C sheet plain 6 m thick 1 Sqm 165.00
121 TBSC-D.VI-04 Plain or Corrugated Galvanized iron sheets as per IS 1 kg 60.00
277 (0.1 mm to 0.8 mm thickness)
122 TBSC-D.VI-05 Supply of Pre-painted Galvalume Trapezoidal Profile 1 Sqm 456.00
Roofing sheets with 0.50mm thickness, Coating: Alu-
Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.
Paint coating: Regular Modified Polyester painting.
Painting Thickness (Top): 18 to 20 Microns,
(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:
Maximum 12 Meters with Regular Range Colours
123 TBSC-D.VI-06 Supply of Pre-painted Galvalume Trapezoidal Profile 1 Sqm 445.00

Roofing sheets with 0.47mm thickness, Coating: Alu-
Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.
Paint coating: Regular Modified Polyester painting.
Painting Thickness (Top): 18 to 20 Microns,
(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:
Maximum 12 Meters with Regular Range Colours
24
Sl. SS RATE FOR
No 2016-17
124 TBSC-D.VI-07 Supply of Pre-painted Galvanized Trapezoidal Profile 1 Sqm 400.00
Roofing sheets with 0.50mm thickness, Coating: Zinc
coating Z120 GSM. Tensile Strength: 300 MPA. Paint
coating: Regular Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7
Microns. Sheet Width: 1.020, Length: Maximum 12
Meters with Regular Range Colours
125 TBSC-D.VI-08 Supply of Pre-painted Galvanized Trapezoidal Profile 1 Sqm 376.00

Roofing sheets with 0.47mm thickness, Coating: Zinc
coating Z120 GSM. Tensile Strength: 300 MPA. Paint
coating: Regular Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7
Microns. Sheet Width: 1.020, Length: Maximum 12
Meters with Regular Range Colours
126 TBSC-D.VI-09 Supply of Roof Accessories medium size: Ridge, Barge 1 RM 307.00
Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc.,
with 0.50mm thick, Width: 0.585, Length: Maximum
2 Meters
127 TBSC-D.VI-10 Supply of Roof Accessories medium size: Ridge, Barge 1 RM 274.00
Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc.,
with 0.47mm thick, Width: 0.585, Length: Maximum
2 Meters
128 TBSC-D.VI-11 Supply of UV resistant multi-wall polycarbonate 1 Sqm 1,290.00
sheets for roofing of any colour - 6 mm thick
129 TBSC-D.VI-12 Aluminium universal glazing set 40 mm wide for 1 RM 128.00
jointing and fixing polycarbonate sheets
130 TBSC-D.VI-13 75 mm long screws - 1 Each 4.00
131 TBSC-D.VI-14 G.I scam bolts & nuts 1 Each 5.00
132 TBSC-D.VI-15 G.I bolts & nuts 1 Each 5.00
133 TBSC-D.VI-16 G.I J bolts 8 mm Diameter 1 Each 10.00
134 TBSC-D.VI-17 G.I Washers 1 Each 1.00
135 TBSC-D.VI-18 Limpet washers (for scam & J bolts) 1 Each 1.00
136 TBSC-D.VI-19 Bitumen washers 1 Each 1.00
E SECTION STEEL MATERIALS
I SUB-SECTION MILD STEEL MATERIALS
25
Sl. SS RATE FOR
No 2016-17
137 TBSC-E.I-01 Supply & fixing of Rolling shutter made of 80 x 1.25 1 Sqm 3,576.00
mm machine rolled CRCA laths, interlocked together
through their entire length and jointed together at the
ends by end-locks, mounted on specially designed
pipe shaft of 50mm Diameter nominal bore MS B
class pipe with brackets, plates, guide channels,
stoppers, bottom locking plates and arrangements for
inside & outside locking with push-pull operations
including cost of hood cover and springs complete,
painted with one coat of approved steel primer, locks,
ball bearings, all accessories etc complete for finished
item of work as per special Spec: 1108
138 TBSC-E.I-02 Supplying & fixing collapsible steel shutters with 1 Sqm 3,129.00
vertical, double channel of 20 x10x2 mm of 100 mm
centre ,Bracers with flat iron 40x40x6 mm with 38
mm Diameter steel pulleys, the top, bottom and side
vertical frames of the collapsible gate with
65x65mmx8mm MS Angle and middle guide rail at
site height with 65mmx8mm MS flat for the pulleys to
guide and fixed with necessary hold fasts, bolts, nuts,
rivets, locking arrangements, stoppers, handles, all
accessories all fixtures and painted with one coat of
approved steel primer etc., complete for finished item
of work as per special Spec 1105
139 TBSC-E.I-03 Expanded metal sheets as per IS-412-1962- Light 1 Sqm 146.00
Weight-25 mm(SWM)x75 mm (LWM)3.25 mm Wide
and 1.25 mm thick
Weight-20 mm(SWM)x60 mm(LWM) 2.50 mm Wide
and 1.25 mm thick
and 1.25 mm thick
142 TBSC-E.I-06 Expanded metal sheets as per IS-412-1962- Medium 1 Sqm 200.00
and 1.60 mm thick
and 1.60 mm thick
and 1.60 mm thick
145 TBSC-E.I-09 Expanded metal sheets as per IS-412-1962- Heavy 1 Sqm 228.00
and 2.24 mm thick
and 2.24 mm thick
26
Sl. SS RATE FOR
No 2016-17
and 2.24 mm thick
148 TBSC-E.I-12 Rabbit wire mesh (chicken mesh) of not less than 30 1 Sqm 17.00
gauge
149 TBSC-E.I-13 Country Nails 1 Kg 61.00
150 TBSC-E.I-14 Wire Nails 1 Kg 61.00
151 TBSC-E.I-15 Mild Steel Tubes & pipes of all Diameters as per IS- 1 Kg 61.00
1161
II SUB-SECTION GALVANIZED STEEL MATERIALS
152 TBSC-E.II-01 Supplying Galvanized Steel Barbed wire conforming 1 Kg 82.00
to IS 278 - 1978 : Type A - IOWA Type Designation as
per standard specification
153 TBSC-E.II-02 Supplying Galvanized Steel Barbed wire conforming 1 Kg 82.00
to IS 278 - 1978 : Type B - Glidden Type Designation
as per standard specification
154 TBSC-E.II-03 Galvanized Iron fly proof wire mesh of not less than 1 Sqm 217.00
20 gauge
155 TBSC-E.II-04 Hot dipped Galvanized Iron Chain link mesh 8 gauge 1 Sqm 477.00
- (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50
mm) - 8 Gauge
- (4.0 mm) as per IS: 2721-1979: 2"x2" (63 mm x
63 mm) - 8 Gauge
- (4.0 mm) as per IS: 2721-1979: 3"x3" (76 mm x 76
mm) - 8 Gauge
- (4.0 mm) as per IS: 2721-1979: 4"x4" (102 mm x
102 mm) - 8 Gauge
- (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2"
(50 mm x 50 mm) - 8 Gauge
- (4.0 mm) as per IS: 2721-1979 - PVC Coated -
2"x2" (63 mm x 63 mm) - 8 Gauge
(76 mm x 76 mm) - 8 Gauge
(102 mm x 102 mm) - 8 Gauge
III SUB-SECTION STAINLESS STEEL MATERIALS
163 TBSC-E.III-01 Stainless Steel Tubes, sections, plates, sheets & pipes 1 Kg 391.00
of all sizes & Diameters for - 304 Grade
164 TBSC-E.III-02 Stainless steel fly proof wire mesh of not less than 20 1 Sqm 527.00
gauge
F SECTION GLASS MATERIALS
27
Sl. SS RATE FOR
No 2016-17
I SUB-SECTION PLAIN GLASS PANES
165 TBSC-F.I-01 Plain Float Glass 4 mm thick 1 Sqm 441.00
170 TBSC-F.I-06 Plain Float Glass 12 mm thick 1 Sqm 1,177.00
II SUB-SECTION PIN HEADED GLASS PANES
171 TBSC-F.II-01 Pin headed Glass 4 mm thick 1 Sqm 331.00
172 TBSC-F.II-02 Pin headed Glass 5 mm thick 1 Sqm 430.00
III SUB-SECTION TINTED GLASS PANES
173 TBSC-F.III-01 Tinted - Bronze/ Green Glass 4 mm thick 1 Sqm 515.00
176 TBSC-F.III-04 Tinted - Bronze/ Green Glass 8 mm thick 1 Sqm 1,104.00
IV SUB-SECTION FROSTED/ GROUND GLASS PANES
179 TBSC-F.IV-01 Frosted / Ground Glass 4 mm thick 1 Sqm 594.00
180 TBSC-F.IV-02 Frosted / Ground Glass 5 mm thick 1 Sqm 747.00
V SUB-SECTION TOUGHENED GLASS PANES
181 TBSC-F.V-01 Toughened Plain Glass 5 mm (including Glass) 1 Sqm 895.00
182 TBSC-F.V-02 Toughened Plain Glass 6 mm (including Glass) 1 Sqm 1,034.00
G SECTION PAINTS & POLISHES
I SUB-SECTION PRIMERS, FILLERS & BASES

186 TBSC-G.I-01 Supply of water based Cement Primer of Interior 1 Kg 165.00
Grade- 1
187 TBSC-G.I-02 Supply of water based Cement Primer of Exterior 1 Kg 210.00
Grade- 2
188 TBSC-G.I-03 Supply of wall putty of White Cement or Polymer or 1 Kg 45.00
Cement based
189 TBSC-G.I-04 Acrylic spray plaster in paste form made with 1 Kg 70.00
specially selected inert mineral fillers, antifungal
agents to protect the material the acrylic binding
medium used gives good surface adhesion any grade
190 TBSC-G.I-05 Supply of Red Oxide Primer Paint for iron works of 1 Liter 142.00
Grade -1
191 TBSC-G.I-06 Supply of Zinc Chromate Yellow Oxide Primer paint 1 Liter 204.00
for iron works
192 TBSC-G.I-07 Supply of Wood Primer 1 Liter 158.00
193 TBSC-G.I-08 Supply of Metal paste (Putty) for steel works 1 Kg 158.00
194 TBSC-G.I-09 Supply of Putty for wood work (Powder chalk) 1 Kg 158.00
195 TBSC-G.I-10 Supply of White Lead 1 Kg 113.00
28
Sl. SS RATE FOR
No 2016-17
196 TBSC-G.I-11 Supply of Synthetic clear Varnish 1 Liter 158.00
197 TBSC-G.I-12 Supply of Spirit 1 Liter 111.00
198 TBSC-G.I-13 Supply of Linseed Oil 1 Liter 63.00
199 TBSC-G.I-14 Supply of thinner for melamine polish/ French polish 1 Liter 146.00
200 TBSC-G.I-15 Supply of thinner for Poly-urethane polish 1 Liter 299.00

201 TBSC-G.I-16 Supply of French Polish 1 Liter 207.00
202 TBSC-G.I-17 Supply of ready made Wax Polish 1 Kg 630.00
203 TBSC-G.I-18 Supply of wood adhesive compound 1 Kg 246.00
204 TBSC-G.I-19 Supply of anti-corrosive grade - 1 bitumen paint of 1 Liter 569.00
black colour
II SUB-SECTION LIME, DISTEMPERS & CEMENT PAINTS
205 TBSC-G.II-01 Supply of paint grade lime for white / colour wash 1 Kg 24.00
206 TBSC-G.II-02 Supply of Dry Powder Distemper 1 Kg 47.00
207 TBSC-G.II-03 Supply of acrylic based Oil Bound washable 1 Kg 90.00
Distemper
208 TBSC-G.II-04 Supply of Water proof Cement paint 1 Kg 55.00
III SUB-SECTION EMULSION BASED PAINTS
209 TBSC-G.III-01 Supply of acrylic emulsion paint interior grade having 1 Liter 214.00
VOC (Volatile Organic Compound ) content less than
50 grams/ liter.
210 TBSC-G.III-02 Supply of acrylic emulsion paint exterior grade with 1 Liter 225.00
silicon additives having VOC (Volatile Organic
Compound ) content less than 50 grams/ liter.
211 TBSC-G.III-03 Supply of acrylic emulsion paint weather proof 1 Liter 248.00
water-based, modified acrylic with silicon additives
exterior grade having VOC (Volatile Organic
IV SUB-SECTION SOLVENT BASED PAINTS

212 TBSC-G.IV-01 Supply of solvent based latex paint having VOC 1 Liter 270.00
(Volatile Organic Compound ) content less than 50
grams/ liter.
213 TBSC-G.IV-02 Supply of synthetic polymer luxury plastic emulsion / 1 Liter 473.00
solvent based luster paint of superior grade having
VOC (Volatile Organic Compound ) content less than
50 grams/ liter.
V SUB-SECTION OIL BASED ENAMEL PAINTS
214 TBSC-G.V-01 Supply of ready mixed Synthetic Enamel paints in all 1 Liter 276.00
shades Grade - I having VOC (Volatile Organic
215 TBSC-G.V-02 Supply of ready mixed Synthetic Enamel paints in all 1 Liter 210.00
shades Grade - II having VOC (Volatile Organic
VI SUB-SECTION TEXTURE PAINTS
216 TBSC-G.VI-01 Exterior grade Texture ready mixed paint with sand 1 Kg 40.00
texture added sand particles Acrylic copolymers and
mineral compounds, bactericides and various
additives.
29
Sl. SS RATE FOR
No 2016-17
217 TBSC-G.VI-02 Exterior grade Texture ready mixed plaster made 1 Kg 52.00
with natural minerals - granite flakes/ marble flakes/
powder, sand and other carefully selected and sieved
minerals in an acrylic binding medium
VII SUB-SECTION SPECIAL PAINTS
218 TBSC-G.VII-01 Supply of Melamine Polish 1 Liter 349.00
219 TBSC-G.VII-02 Supply of Interior Grade Poly-Urethane Polish 1 Liter 710.00
220 TBSC-G.VII-03 Supply of Exterior Grade Poly-Urethane Polish 1 Liter 868.00
221 TBSC-G.VII-04 Supply of grade-1 aluminium paint 1 Liter 284.00
H SECTION PARTICLE BOARDS
I SUB-SECTION MELAMINE FACED PLAIN PARTICLE BOARD

222 TBSC-H.I-01 Melamine faced Single Deco Plain Particle Board- 8 1 Sqm 676.00
mm thick conforming to IS 3129
225 TBSC-H.I-04 Melamine faced Single Deco Plain Particle Board- 25 1 Sqm 1,007.00
226 TBSC-H.I-05 Melamine faced Single Deco Plain Particle Board- 35 1 Sqm 1,675.00
227 TBSC-H.I-06 Melamine faced Twin Deco Plain Particle Board- 8 1 Sqm 778.00
228 TBSC-H.I-07 Melamine faced Twin Deco Plain Particle Board- 12 1 Sqm 889.00
229 TBSC-H.I-08 Melamine faced Twin Deco Plain Particle Board-18 1 Sqm 1,028.00
II SUB-SECTION INSULATING PARTICLE BOARDS
232 TBSC-H.II-01 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 252.00
conforming to IS 3348
235 TBSC-H.II-04 White Insulating Board - 12 mm thick conforming to 1 Sqm 307.00
IS 3348
IS 3348
IS 3348
III SUB-SECTION MEDIUM DENSITY FIBRE BOARDS
238 TBSC-H.III-01 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 411.00
30
Sl. SS RATE FOR
No 2016-17
243 TBSC-H.III-06 Medium Fibre Board: Interior Grade - 25 mm thick 1 Sqm 1,257.00
246 TBSC-H.III-09 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm 559.00
249 TBSC-H.III-12 Medium Fibre Board: Exterior Grade - 15 mm thick 1 Sqm 1,083.00
254 TBSC-H.III-17 MDF Board: Plain-Interior - 9 mm thick conforming to 1 Sqm 377.00
IS 15932
255 TBSC-H.III-18 MDF Board: Plain-Interior - 12 mm thick conforming 1 Sqm 428.00
to IS 15932
to IS 15932
to IS 15932
to IS 15932
259 TBSC-H.III-22 MDF Board: Plain-Interior - 35 mm thick conforming 1 Sqm 1,147.00
to IS 15932
260 TBSC-H.III-23 MDF Board: Plain-Exterior - 9 mm thick conforming 1 Sqm 493.00
to IS 15932
to IS 15932
to IS 15932
to IS 15932
31
Sl. SS RATE FOR
No 2016-17
264 TBSC-H.III-27 MDF Board: Plain-Exterior - 30 mm thick conforming 1 Sqm 1,147.00
to IS 15932
265 TBSC-H.III-28 MDF Board: Plain-Exterior - 35 mm thick conforming 1 Sqm 1,323.00
to IS 15932
266 TBSC-H.III-29 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 591.00
267 TBSC-H.III-30 MDF Board: Interior-One Side Laminated -12 mm 1 Sqm 668.00
thick conforming to IS 15932
270 TBSC-H.III-33 MDF Board: Interior-One Side Laminated -30 mm 1 Sqm 1,262.00
271 TBSC-H.III-34 MDF Board: Interior-One Side Laminated -35 mm 1 Sqm 1,346.00
272 TBSC-H.III-35 MDF Board: Exterior-One Side Laminated -9 mm 1 Sqm 679.00
275 TBSC-H.III-38 MDF Board: Exterior-One Side Laminated -25 mm 1 Sqm 1,010.00
278 TBSC-H.III-41 MDF Board: Interior-Both Side Laminated -9 mm 1 Sqm 675.00
281 TBSC-H.III-44 MDF Board: Interior-Both Side Laminated -25 mm 1 Sqm 1,097.00
284 TBSC-H.III-47 MDF Board: exterior-Both Side Laminated -9 mm 1 Sqm 762.00
285 TBSC-H.III-48 MDF Board: exterior-Both Side Laminated -12 mm 1 Sqm 863.00
286 TBSC-H.III-49 MDF Board: exterior-Both Side Laminated -18 mm 1 Sqm 1,021.00
32
Sl. SS RATE FOR
No 2016-17
IV SUB-SECTION CEMENT BONDED PLAIN & PARTICLE BOARDS
290 TBSC-H.IV-01 Cement Bonded Board conforming to IS:14862-2000 1 Sqm 159.00
- 4mm Thick
- 6mm Thick
- 8mm Thick
- 10mm Thick
- 12mm Thick
- 14mm Thick
- 16mm Thick
- 18mm Thick
- 20mm Thick
299 TBSC-H.IV-10 Cement bonded particle board conforming to IS 1 Sqm 248.00
14276-6 mm thick
14276- 8 mm thick
14276- 10 mm thick
14276- 12 mm thick
14276- 16 mm thick
14276- 20 mm thick
305 TBSC-H.IV-16 Cement bonded particle board conforming to IS 1 Sqm 1,049.00
14276- 25 mm thick
14276- 30 mm thick
14276- 40 mm thick
308 TBSC-H.IV-19 Pre-laminated cement bonded particle board-6 mm 1 Sqm 579.00
thick
309 TBSC-H.IV-20 Pre-laminated cement bonded particle board-8 mm 1 Sqm 626.00
thick
310 TBSC-H.IV-21 Pre-laminated cement bonded particle board- 10 mm 1 Sqm 672.00
thick
thick
thick
33
Sl. SS RATE FOR
No 2016-17
313 TBSC-H.IV-24 50 mm thick SOLID WALL PANEL Sandwich panels 1 Sqm 1,071.00
made of light weight FRACC non-asbestos fibre
reinforced cement concrete
314 TBSC-H.IV-25 75 mm thick SOLID WALL PANEL Sandwich panels 1 Sqm 1,285.00
made of light weight FRACC non-asbestos fibre
reinforced cement concrete
J SECTION PLYWOODS, LAMINATES & VENEERS
I SUB-SECTION MOISTURE RESISTANT (MR) GRADE

315 TBSC-J.I-01 3 Ply - 4 mm thick Plywood conforming to IS:303 MR 1 Sqm 407.00
Grade
Grade
Grade
Grade
319 TBSC-J.I-05 9 Ply - 12 mm thick Plywood conforming to IS:303 1 Sqm 662.00
MR Grade
MR Grade
MR Grade
II SUB-SECTION BOILING WATER RESISTANT (BWR) GRADE
322 TBSC-J.II-01 3 Ply - 4 mm thick Plywood conforming to IS:303 1 Sqm 465.00
BWR Grade
BWR Grade
BWR Grade
BWR Grade
BWR Grade
327 TBSC-J.II-06 9 Ply - 15 mm thick Plywood conforming to IS:303 1 Sqm 1,205.00
BWR Grade
328 TBSC-J.II-07 9 Ply - 19 mm thick Plywood conforming to IS:303 1 Sqm 1,209.00
BWR Grade
III SUB-SECTION VENEERED DECORATIVE PLYWOOD
329 TBSC-J.III-01 3 Ply-4 mm thick One side Teak Veneered Decorative 1 Sqm 602.00
Plywood conforming to IS:1328
330 TBSC-J.III-02 5 Ply - 6 mm thick One side Teak Veneered 1 Sqm 784.00
Decorative Plywood conforming to IS:1328
331 TBSC-J.III-03 5 Ply - 9 mm thick One side Teak Veneered 1 Sqm 1,005.00
332 TBSC-J.III-04 9 Ply - 12 mm thick One side Teak Veneered 1 Sqm 1,280.00
333 TBSC-J.III-05 5 Ply - 9 mm thick Both sides Teak Veneered 1 Sqm 1,311.00
34
Sl. SS RATE FOR
No 2016-17
334 TBSC-J.III-06 9 Ply - 12 mm thick Both sides Teak Veneered 1 Sqm 1,529.00
IV SUB-SECTION LAMINATES
335 TBSC-J.IV-01 Melamine Laminate Sheets - Glossy Finish: 1.00 mm 1 Sqm 403.00
thick
thick
thick
338 TBSC-J.IV-04 Melamine Laminate Sheets - Mat Finish: 1.00 mm 1 Sqm 428.00
thick
thick
thick
V SUB-SECTION COMMERCIAL VENEERS
341 TBSC-J.V-01 Teak Veneer Lamination of 4 mm thick with Pencil 1 Sqm 450.00
Grains conforming to IS 14315
342 TBSC-J.V-02 Teak Veneer Lamination of 4 mm thick with Natural 1 Sqm 829.00
Grains conforming to IS 14315
K SECTION CEILINGS, WALL PARTITIONS & WALL LININGS
I SUB-SECTION FALSE CEILINGs - TILES/ SHEETS

343 TBSC-K.I-01 Gypsum Board tiles of size not less than 0.595 M x 1 Sqm 281.00
0.595 M of 12.5 mm thick as per IS 2095 -1992
344 TBSC-K.I-02 Gypsum Board tiles of size not less than 0.595 M x 1 Sqm 274.00
0.595 M of 9 mm thick as per IS 2095 -1992
345 TBSC-K.I-03 Gypsum Board Plain sheet 12.5 mm thick as per IS 1 Sqm 248.00
2095 -1993
346 TBSC-K.I-04 12 mm - Mineral Fiber sheet 600 x 600 (Square / 1 Sqm 456.00
Tegular) Edge tiles
347 TBSC-K.I-05 14 mm - Mineral Fiber sheet 600 x 600 of Board / 1 Sqm 590.00
Tegular Edge tiles with a Humidity Resistance of 90%
RH, Average NRC 0.50, Light Reflectance >80%,
Thermal Conductivity = 0.052 to 0.057 w/mk, Fire
Performance Class 0/Class 1
348 TBSC-K.I-06 15 mm - Mineral Fiber sheet 600 x 600 of Board / 1 Sqm 690.00
Tegular Edge tiles with a Humidity Resistance of 95%
RH, Average NRC 0.50, Light Reflectance >85%,
349 TBSC-K.I-07 16 mm - Tegular Edge 600 x 600 of Board / Tegular/ 1 Sqm 743.00
Micro look Edge tiles with a Humidity Resistance of
99% RH, Average NRC 0.60, Light Reflectance >85%,
350 TBSC-K.I-08 Designer ceiling Cement Boards -thickness 3.2 mm 1 Sqm 259.00
351 TBSC-K.I-09 High pressure steam cured Cement Boards 4 mm 1 Sqm 138.00
thick
35
Sl. SS RATE FOR
No 2016-17
thick
thick
thick
thick
thick
thick
thick
thick
360 TBSC-K.I-18 High pressure steam cured designer Cement Boards 1 Sqm 204.00
4 mm thick
361 TBSC-K.I-19 High pressure steam cured designer Cement Boards 1 Sqm 300.00
6 mm thick
362 TBSC-K.I-20 Calcium Silicate Boards - 6mm thick 1 Sqm 230.00
366 TBSC-K.I-24 Supply of Thermocol 12 mm thick sheets 1 Sqm 26.00
367 TBSC-K.I-25 Supply of Thermocol 19 mm thick sheets 1 Sqm 46.00
368 TBSC-K.I-26 Supplying and fixing of false ceiling using Plaster of 1 Sqm 441.00
Paris Boards 12 mm thick with standard GI ceiling
angles, sections perimeter channels including cost
and conveyance of all materials and labour charges
etc complete
369 TBSC-K.I-27 Supplying and fixing of false ceiling using Plaster of 1 Sqm 367.00
Paris Boards 10 mm thick with standard GI ceiling
angles, sections perimeter channels including cost
etc complete
370 TBSC-K.I-28 Supply and fixing false ceiling using 8 mm thick 1 Sqm 1,257.00
Cement Bonded particle boards conforming to IS
14276 with galvanized and pre painted steel T
section of size 24mm x 38mm x 0.3 mm for main T
duty pre punched to accept cross T section of size
24mm x 30mm x 0.3 mm duly punched at both ends
for insertion into main T. The grid size will be 610mm
x 610mm. The frame work (grid) is suspended to the
roof by using G.I flat of 0.60mm or 14-gauge G.I wire
with necessary fixers to the roof and frame work the
cost is inclusive of necessary hardware, labor, one
coat of primer (Both side) and two coats of smooth
finish on visible side.
36
Sl. SS RATE FOR
No 2016-17
371 TBSC-K.I-29 Providing and fixing false ceiling consisting of 1 Sqm 1,350.00
600mmX600mm, Solid PVC insulation panels having
wall thickness of 1mm thick plain PVC rigid foam
sheet and EPS as defined in of desired thickness
depending on insulation required shall be insert in a
frame work made using anodized aluminium Tee
section of sizes 1X1 (25X25mm, 19 gauge or 1mm
thick) in square pattern of grid sizes of 2X2
(600X600mm). The aluminium framework is
supported from the ceiling with the help of G.I. hook
and G.I. wire/6mm.M.S. rods of required sizes to
maintain proper level etc. the aluminium framework
is supported on side wall with the use of aluminium
1X1 (25X25mm) angles, complete as per direction
of Engineer-in-Charge & drawing
372 TBSC-K.I-30 Supply and fixing of PVC false ceiling on MS/GI made 1 Sqm 1,498.00
skeleton framework. The frame shall be 24 X 48mm
MS tube section fixed along with the wall. The entire
frame work shall be concealed with PVC section
having overall dimensions of 6 X 250 mm with a wall
thickness of 1mm 0.3mm with tongue and groove
system, provided with necessary arrangements for
electrical connections, complete, for finished item of
work.
15 mm - Micro Look Edge 600 x 600 of Board / 1 Sqm 1,547.00

Tegular/ Micro look Edge tiles with a Humidity
Resistance of 95% RH, Average NRC 0.90, Light
Reflectance >88%, Thermal Conductivity = 0.032
w/mk, Fire Performance Class 0/Class 1suitable for
Green Building application, with Recycled content of
88% (FG)
16 mm - Tegular Edge 600 x 600 of Board / Tegular/ 1 Sqm 685.00
Micro look Edge tiles with a Humidity Resistance of
99% RH, Average NRC 0.55, Light Reflectance >84%,
Providing & Fixing of Lay-in-metal plain ceiling 1 Sqm 746.00
System consisting of 600 x 600mm Lay in GI tiles of
pre coated galvanised steel in 0.5 mm thickness in
white colour to be laid on grid systems with 15mm
wide T - section flanges but excluding cost of Grid
systems complete for finsihed item of work
37
Sl. SS RATE FOR
No 2016-17
Providing & Fixing of GI Lay in Standard 1 Sqm 1,069.00
Perforated(2.5mm diameter-16% open area) metal
ceiling consisting of 600 x 600 mm Lay in tiles of pre
coated galvanized steel in 0.5 mm thickness in Global
white color acoustical fleece hot pressed to the back
of the perforated tile to be laid on grid systems with
0.5 mm thickness in white colour with 15mm wide T -
section flanges but excluding cost of Grid systems and
having rotary stitching on the Main Runner, 1200 mm
& 600 mm Cross Tees and the tiles with NRC of 0.70,
Fire Performance of Class A2-s1.d0 as per EN13501
standard in module size of 600 X 600 mm suitable for
Green Building application, with Recycled content of
25% complete for finsihed item of work
II SUB-SECTION FALSE CEILINGs - SECTIONS & ACCESSORIES

373 TBSC-K.II-01 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 74.00
374 TBSC-K.II-02 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 1 RM 85.00
0.55 mm thick
375 TBSC-K.II-03 G.I. intermediate Section 45 mm x 15 mm x 15 mm x 1 RM 84.00
0.9 mm
376 TBSC-K.II-04 G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm 1 RM 74.00
(web) of 0.55 mm thick
377 TBSC-K.II-05 G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 1 RM 41.00
mm
378 TBSC-K.II-06 G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 1 RM 37.00
mm
379 TBSC-K.II-07 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm 1 RM 54.00
thick
380 TBSC-K.II-08 Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 1 RM 40.00
mm
381 TBSC-K.II-09 Polyester painted GI - T Section - 24 x 32 mm 1 RM 50.00
382 TBSC-K.II-10 Polyester painted GI - T Section - 24 x 25 mm 1 RM 45.00
383 TBSC-K.II-11 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 46.00
384 TBSC-K.II-12 Aluminium Angle : 24 mm x 24 mm 1 RM 26.00
385 TBSC-K.II-13 Anodized Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 34.00
386 TBSC-K.II-14 Connecting Clips 1 Each 2.00

387 TBSC-K.II-15 Rawl Plug 1 Each 2.00
388 TBSC-K.II-16 6 mm Nylon Rawl Plug 1 Each 3.00
389 TBSC-K.II-17 Soffit Cleats 1 Each 2.00
390 TBSC-K.II-18 Drywall Screws - 25 mm 1 Each 2.00
391 TBSC-K.II-19 Jointing Compound 1 Kgs 29.00
392 TBSC-K.II-20 Jointing Paper Tape 1 RM 5.00
393 TBSC-K.II-21 Drywall Top Coat 1 Liter 142.00
394 TBSC-K.II-22 Universal Holding Clips 1 Each 3.00
395 TBSC-K.II-23 4 mm Diameter GI Connecting Rod 1 RM 12.00
396 TBSC-K.II-24 2 mm Diameter GI Connecting Rod 1 RM 10.00
III SUB-SECTION WALL LINING & PANELLING
38
Sl. SS RATE FOR
No 2016-17
397 TBSC-K.III-01 Providing wooden paneling 12 mm thick 1 Sqm 1,810.00
prelaminated particle board fixed on wooden frame
of BT wood size 50.8 mm x 25.4 mm (2"x1") at
distance of 609.6mm (2'-0") intervals of both ways
providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT
wood ornamental cover beading and necessary
screws, synthetic glue complete for finished item of
work.
398 TBSC-K.III-02 Perforated wall panels channeled wood works sheets 1 Sqm 3,495.00
of width 128 mm, thickness of 16mm and length 2440
mm made of a high density particle board substrate
with a laminated facing as per the approved shade/
species & finish and a melamine balancing layer on
the reverse side, with a special perforation pattern
fluted perforation on the visible surface with a
minimum sag resistance of RH90 and a fire rating
class of 1 as per Part 7 of BS 476 with a tongue-and-
grooved edges and the back of the perforated panel
is with sound absorbing non-woven acoustical fleece
399 TBSC-K.III-03 Supply and fixing of wall lining fixing to GI channels 1 Sqm 765.00
of perimeter channel 30mm x 27mm x 0.55 thick and
ceiling channels of 51.1mm x 26mm x 10.5mm x
0.55mm thick and fixing and finishing using joint
compound and glass fibre tape complete finish as per
specification without painting for finished item of
work: using 8mmthick Calcium silicate boards
work: Using 10mm thick Calcium silicate boards
work: Using 12mm thick Calcium silicate boards
39
Sl. SS RATE FOR
No 2016-17
402 TBSC-K.III-06 Supply and fixing of cement board (conforming to 1 Sqm 921.00
IS:14862:2000) wall paneling with frame work made
of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick
placed at every 610 mm C/C intervals fixed vertically
in between floor and roof `U track of size 50 x 30 x
0.6 mm thick duly fixed with self expansion screws
and fixing with self tapping self embedding screws
fixed at every 300 mm (centres) leaving a 3 mm gap
between two panels of width 2-0. The Gap will be
covered with a decorative beading. Surface will be
given a smooth finish over a coat of primer. - With 8
mm Cement Bonded Board
403 TBSC-K.III-07 Supply and fixing of cement board (conforming to 1 Sqm 1,060.00
IS:14862:2000) wall paneling with frame work made
of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick
placed at every 610 mm C/C intervals fixed vertically
in between floor and roof `U track of size 50 x 30 x
0.6 mm thick duly fixed with self expansion screws
and fixing with self tapping self embedding screws
fixed at every 300 mm (centres) leaving a 3 mm gap
between two panels of width 2-0. The Gap will be
covered with a decorative beading. Surface will be
given a smooth finish over a coat of primer. - With 10
mm Cement Bonded Board
404 TBSC-K.III-08 Supply and fixing Cement Bonded Particle Board 1 Sqm 1,658.00
conforming to IS 14276 wall paneling using 10 mm
Cement Bonded Particle Board conforming to IS
14276 with frame work made of GI stud section of
size 48mm x 35mm x 0.55mm thick placed at every
610 mm C/C intervals vertically and at 1200mm
internals horizontally fixed to the wall by means of
self expansion screws and caps and Cement Bonded
Particle Board conforming to IS 14276 is to be fixed
to frame by means of self taping screws placed at
every 300 mm intervals leaving 3mm gap between
two panels. The cost inclusive of one coat of synthetic
plastered primer and two coats of synthetic smooth
finished putty and cost & conveyance of all materials,
labor charges etc. complete as per the direction of
Engineer in charge.
40
Sl. SS RATE FOR
No 2016-17
405 TBSC-K.III-09 Supply and fixing of Cement Bonded Pre-laminated 1 Sqm 2,334.00
Particle Board wall paneling using 12 mm Cement
Bonded Pre-laminated Particle with frame work
made of G.I stud section of size 48mm x 35mm x
0.55mm thick placed at every 610mm intervals
vertically and at 1200mm internals horizontally fixed
to the wall by means of self expansion screws and
caps. Cement Bonded Pre-laminated Particle is to be
fixed to frame by means of self-taping screws placed
at every 300mm intervals leaving 3mm gap between
two panels. The cost inclusive of Conveyance of
materials, Labor charges etc., complete as per the
direction of Engineer in charge
406 TBSC-K.III-10 Providing and fixing plain PVC rigid foam sheet wall 1 Sqm 2,076.00
paneling of thickness 5mm consisting of panels
having size 1220mm X2440mm stuck on inner frame
work of 25mm wide strips of 5mm thick PVC rigid
foam sheet. The strips should have in their centre a
grove of 6mm width and 2mm depth for sinking the
head of the screw used to fix the strips to the wall and
should be placed vertically at equal intervals of
405/407mm centre to c entre. The PVC strips shall be
fixed to the wall using 65mm long M.S. screws
through the groove in the strip by using PVC
fasteners. The distance between two screws shall not
be more than 300mm. a groove of 2mm may be left at
the joint of two panels for aesthetic looks. This
framework is done for making existing wall surface in
ensured level and for sticking the wall paneling sheet
(panel) on it. The exact size of the panel and
correspondingly of the grid May be varied depending
n the size of the wall. However it must ensured that a
strips of 5mm thick PVC sheet of width 75mm
feathered at the edges shall be stuck at the places
where two panels are joined, using solvent cement. ,
complete as per direction of Engineer-in-Charge,
manufactures specification & drawing
41
Sl. SS RATE FOR
No 2016-17
407 TBSC-K.III-11 Providing and fixing INSULATED PVC WALL paneling 1 Sqm 2,185.00
shall consist of PVC insulated panels having wall
thickness of 1mm /1.5mm/2mm PVC sheet and the
desired thickness of EPS (dependent on the insulation
required) screwed into the wall using screws of
adequate length. The screws shall be placed at a
distance of 150mm and shall be 25mm from the edge
of the insulated panel on all from sides of the panel.
The PVC strips of 5mm thick PVC sheet of width
75mm feathered at the edges shall be stuck using
solvent cement adhesive at the places where two
panels are joined, so a to cover the screw of both the
panels, using solvent cement. 90 heat bent strips of
5mm thick PVC sheets of width 75mm X75mm
feathered at the edges shall be stuck at wall joints /
pillars etc. , complete as per direction of Engineer-in-
Charge, manufactures specification & drawing
408 TBSC-K.III-12 Supply and fixing of wall paneling on the framework 1 Sqm 1,419.00
of wooded rippers of 24 X 24mm of required size.
The entire framework shall be panelled with PVC
section having overall dimensions of 6 X 250mm with
a wall thickness of 1mm 0.3mm. The panels are
joined with tongue and groove system. Necessary
cut-outs for electrical connections to be provided at
required places complete, for finished item of work.
IV SUB-SECTION PARTITIONS
409 TBSC-K.IV-01 Supply & fixing 75mm thick metal stud partition 1 Sqm 1,222.00
using 12.5 mm thick Gypboard conforming to IS
2095-1982 screw fixed to either side to 48 mm studs
of 0.55 mm thick with the 50 mm floor and ceiling
channel 0.55 mm and the joints duly finished with
joint compound, paper tape and two coats Dry wall
top coat as per specification.
410 TBSC-K.IV-02 Supply and Fixing 66mm thick metal stud partition 1 Sqm 1,290.00
screw fixed to either side of 48mm studs of 0.55mm
thick with 50mm floor and ceiling channel 0.55mm
and the joints duly finished with joining compound,
glass fibre tape and two coats dry wall top coat as per
specification finished Item of work- using 8mm thick
Calcium silicate boards
specification finished Item of work - Using 10mm
thick Calcium silicate boards
42
Sl. SS RATE FOR
No 2016-17
specification finished Item of work - Using 12mm
thick Calcium silicate boards
using 2 layers of 12mm thick Calcium silicate boards
screw fixed to either side to 48mm studs of 0.55mm
thick with 50mm floor and ceiling channel
0.55mm.The boards joints are to be staggered to
avoid through passage. Ceramic wool of 50mm thick,
64kg/m3 density is to be placed in cavity of the
partition. The joints duly finished with joining
compound, glass fibre tape and two coats dry wall
top coat as per specification with out painting for
finished item of work
414 TBSC-K.IV-06 Supply and fixing double skin cement board 1 Sqm 1,608.00
(conforming to IS:14862:2000) partition with Frame
work made of GI stud profile of size 48 x 40 x 10 x
0.55 mm thick placed at every 610 mm C/C intervals
and 1220 mm horizontal intervals duly fixed with self
expansion screws, the cement board of 8 mm thick
cladded around with self tapping self embedding
screws fixed at every 300 mm (centres) leaving 3 mm
gap between two panels and the gap will be covered
with decorative molding surface will be given a
smooth finish over cement primer. The rate is
inclusive of cost and conveyance of all materials and
labour charges etc. complete.
43
Sl. SS RATE FOR
No 2016-17
415 TBSC-K.IV-07 Providing and fixing of 50 mm thick SOLID WALL 1 Sqm 1,660.00
PANEL Sandwich panels made of light Weight FRACC
two 5 mm thick non-asbestos fibre reinforced cement
sheets (conforming to IS:14862:2000) on either side
of the lightweight concrete core composed of
Portland cement binders with tongue and groove
arrangement. The bottom of the panel shall be fixed
to the floor channel made up of 1 mm thick GI
channels of size 28x52x31 mm fixed to the existing
floor with 6x60mm nylon self expansion screws at
600 mm C/C and top of the panel fixed with ceiling
channel made out of 0.8 mm thick GI Channel of size
31x52x31 mm duly fixed to the existing ceiling with
6x60mm nylon self expansion screws at 600 mm C/C.
All the tongue and groove joints of the panels have to
be properly cleaned and both the panels have to be
fixed by applying the mixture of fly ash and sodium
silicate in between and Everest jointing compound all
the exposed joints. The rate includes cost of 50mm
SOLID WALL PANELS, G.l. Floor and ceiling channel.
The panels can be flushed by using paper tape and
Everest jointing compound all complete
416 TBSC-K.IV-08 Providing and fixing of 75mm thick SOLID WALL 1 Sqm 1,982.00
PANEL Sandwich panels made of light Weight FRACC
two 5 mm thick non-asbestos fibre reinforced cement
sheets (conforming to IS:14862:2000) on either side
of the lightweight concrete core composed of
Portland cement binders with tongue and groove
arrangement. The bottom of the panel shall be fixed
to the floor channel made up of 1 mm thick GI
channels of size 28x77x31 mm fixed to the existing
floor with 6x60mm nylon self expansion screws at
600 mm C/C and top of the panel fixed with ceiling
channel made out of 0.80 mm thick GI Channel of size
31x77x31 mm duly fixed to the existing ceiling with
6x60mm nylon self expansion screws at 600 mm C/C.
All the tongue and groove joints of the panels have to
be properly cleaned and both the panels have to be
fixed by applying the mixture of fly ash and sodium
silicate in between and Everest jointing compound all
the exposed joints. The rate includes cost of 75mm
SOLID WALL PANEL panels, G.l. Floor and ceiling
channel. The panels can be flushed by using paper
tape and Everest jointing compound all complete.
44
Sl. SS RATE FOR
No 2016-17
417 TBSC-K.IV-09 Supply & fixing of 50 mm thick partition with 1 Sqm 1,660.00
composite panel comprise of two 5mm thick Boards
(asbestos-free fibre reinforced cement sheets
conforming to IS 14862) strongly bonded with core
material which is light weight concrete mix of
Portland cement, expanded polystyrene bead
aggregates and admixture. s with unique semi-
circular Tongue & Groove Joining System provides
better stability, rapid installation and better
workability. The bottom of the panel shall be fixed to
the floor channel made up of 1 mm thick GI channels
of size 28x52x31 mm fixed to the existing floor with
6x60mm nylon self-expansion screws at 600 mm C/C
and top of the panel fixed with ceiling channel made
out of 0.8 mm thick GI Channel of size 31 x 52 x 31
mm duly fixed to the existing ceiling with 6x60mm
nylon self-expansion screws at 600 mm C/C. All the
tongue and groove joints of the panels have to be
properly cleaned and both the panels have to be fixed
by applying the jointing compound in all the exposed
joints. The rate includes cost of 50mm S, G.l. Floor and
ceiling Channel.
418 TBSC-K.IV-10 Supply & fixing of 75 mm thick partition with 1 Sqm 1,982.00
composite panel comprise of two 5mm thick Boards
(asbestos-free fibre reinforced cement sheets
conforming to IS 14862) strongly bonded with core
material which is light weight concrete mix of
Portland cement, expanded polystyrene bead
aggregates and admixture. s with unique semi-
circular Tongue & Groove Joining System provides
better stability, rapid installation and better
workability. The bottom of the panel shall be fixed to
the floor channel made up of 1 mm thick GI channels
of size 28x77x31 mm fixed to the existing floor with
6x60mm nylon self-expansion screws at 600 mm C/C
and top of the panel fixed with ceiling channel made
out of 0.8 mm thick GI Channel of size 31x77x31 mm
duly fixed to the existing ceiling with 6x60mm nylon
self-expansion screws at 600 mm C/C. All the tongue
and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by
applying the jointing compound in all the exposed
joints. The rate includes cost of 75mm S, G.l. Floor and
ceiling Channel.
45
Sl. SS RATE FOR
No 2016-17
419 TBSC-K.IV-11 Supply and fixing double skin partition using with 10 1 Sqm 2,422.00
mm Cement Bonded Particle Board conforming to IS
14276 made out of G.I. track section of size 50mmx
35mm x 0.55 mm for fixing to the roof and floor and
stud section of size 48mm x 35mm x 0.55mm placed
in track section vertically at 610mm intervals and at
1200mm intervals horizontally fixed to the wall by
means of self expansion screws and caps to the wall
and roof the panel is to be fixed both sides of frame
work by using self taping screws fixed at every
300mm intervals to the frame work leaving 3 mm
gap between two panels. The cost inclusive with one
coat of synthetic primer and two coats of synthetic
plaster smooth finish and cost and conveyance of all
materials to site, labor charges etc., complete as per
the direction of Engineer in charge.
420 TBSC-K.IV-12 Supply and fixing of Cement Bonded Prelaminated 1 Sqm 3,338.00
Particle Board double skin partition using with 10
mm Cement Bonded Prelaminated Particle Board
made out of G.I track section of size 50 mm x 35mm x
0.55mm for fixing to the roof and floor and stud
section of size 48mm x 35mm x 0.55mm placed in
track section vertically at 610mm intervals and at
1200mm internals horizontally. The frame is fixed by
means of self expansion screws and caps to the wall /
roof. Cement Bonded Prelaminated Particle Board is
to be fixed both sides of the frame work by using
2mm thick electro plated CR flat section leaving 3mm
gap between two panels. The cost inclusive of cost
and conveyance of all materials to sites, other
materials incidentals and labour charges as per the
direction of Engineer in charges.
421 TBSC-K.IV-13 Supply and fixing of Cement Bonded Prelaminated 1 Sqm 3,849.00
Particle Board aluminum glazed partitions using
10MM Cement Bonded Prelaminated Particle Board
and 5.00 mm thick plain glass to full height. Using
with Cement Bonded Prelaminated Particle Board to
a height of 0.91 meter at bottom panel and remaining
height with glass and aluminum sections anodized to
12 to 15 microns and of sections of size 37mm x
62mm and 1.5mm thickness with one meter centre to
centre duly fixed with clip beading on both sides
including fixing the frame to pillars by M.S. flats, bolts
and nuts including cost and conveyance of all
materials etc., complete as directed during execution.
46
Sl. SS RATE FOR
No 2016-17
422 TBSC-K.IV-14 Providing and fixing 50mm thick SEMI HEIGHT SOLID 1 Sqm 2,950.00
PVC PARTITION consisting of 49mm sandwich PVC
panel made out of 36mm high density expanded
polystyrene sheet(E.P.S.-Thermocol) stuck on both
side with 2mm thick plain/printed /prelam PVC rigid
foam sheets reinforced with frame work made from
35mmX5mm M.S. Angle. In between two M.S. Angles
5mm thick plain/printed/prelam heat molded PVC
C channel of size 50X100mm with feathered edges
shall be fixed on the floor & 50X75mm with feathered
edges plain/printed /prelam PVC C channel. In
between adjoining EPS sandwiched PVC partitions
panel 5mm thickX75mm width plain/printed/prelam
PVC sheet feathered at edges shall be stuck on front &
back face using solvent cement etc. in places where
two partitions meet to from an L shape the panels
are joined 5mm thick plain/printed/prelam heat
molded PVC L section of size 75mmX75mm with
feathered edges shall be fixed on front & back side.
This is done to maintain the symmetry of design. An
additional 5mm thick PVC strip of 40mm width is to
be stuck on the interior side of the C Channel using
PVC solvent adhesive, complete as per direction of
Engineer-in-Charge, manufactures specification &
drawing
423 TBSC-K.IV-15 Supply and fixing of PVC Double Skin Partition. The 1 Sqm 2,490.00
entire framework shall be carried out by mild steel
section having overall dimensions of 24 X 48mm with
a wall thickness of 1.2mm. The entire framework
shall be concealed with PVC section having overall
dimensions of 6 X 250mm with a wall thickness of
1mm 0.3mm both sides. Glass provision/Door
provision can be provided along the partition
wherever required. Partitions can be made full or
half as per requirement complete, for finished item of
work.
424 TBSC-K.IV-16 Supply and fixing double skin cement based Board 1 Sqm 1,392.00
partition with Frame work made of GI stud profile of
size 48x40x 10x 0.6 mm thick placed at every 610
mm C/C intervals and 915 mm horizontal intervals
duly fixed with self expansion screws, the Cement
Bonded Board of 8 mm thick cladded around with
self tapping self embedding screws fixed at every 300
mm (centres) leaving a 3 mm gap between two panels
of width 2-0(610 mm). The Gap will be covered with
a decorative molding surface will be given a smooth
finish over cement primer. The rate Inclusive of cost
etc., Complete. DOUBLE SKIN PARTITION
47
Sl. SS RATE FOR
No 2016-17
425 TBSC-K.IV-17 Supply and fixing of partitions made of seccolor pre- 1 Sqm 4,925.00
painted steel (base steel as per IS 513 of 0.58 mm
thick D quality, galvanized as per IS 277 with Zinc of
120 GSM). Primer coated with epoxy primer of 5-7
microns thick, finish painted with a polyester paint of
12-16 microns thick alkyd backer. Section for outer
frame should be 46x52mm, section for shutter should
be 46x46mm, section for mullion should be
46x70mm, section for beading should be 18x25mm
and section for middle and bottom rail (Lock Rail and
Kick Rail) of size should be 23x130mm. The partition
should be paneled with 9mm pre-laminated particle
board to a height of 0.91m from the bottom, and
remaining height with 5mm thick plain glass With
Ethyl Propylene Diametermine Monomer (EPDM)
Gaskets. The sections are to be cut to length, mitre
joined with corner bracket Centre mullions are to be
fixed using mullion cap. Gaskets made of Ethyl
Propylene Diametermine Monomer (EPDM). Corner
brackets made of CRCA with zinc phosphate. Mullion
caps made of Glass filled nylon. The above frames
should be fixed to the concrete/masonry wall by
means of self expanding screws, and complete for
finished item of work Fixed Partition: Outer frame
section size of 46x52mm, mullion section should be of
46x70mm, fixed beading should be of 18x25mm.
426 TBSC-K.IV-18 Supply and fixing of partitions made of seccolor pre- 1 Sqm 5,616.00
painted steel (base steel as per IS 513 of 0.58 mm
thick D quality, galvanized as per IS 277 with Zinc of
120 GSM). Primer coated with epoxy primer of 5-7
12-16 microns thick alkyd backer. Section for outer
frame should be 46x52mm, section for shutter should
be 46x46mm, section for mullion should be
46x70mm, section for beading should be 18x25mm
and section for middle and bottom rail (Lock Rail and
Kick Rail) of size should be 23x130mm. The partition
should be paneled with 9mm pre-laminated particle
board to a height of 0.91m from the bottom, and
remaining height with 5mm thick plain glass With
Ethyl Propylene Diametermine Monomer (EPDM)
Gaskets. The sections are to be cut to length, mitre
joined with corner bracket Centre mullions are to be
fixed using mullion cap. Gaskets made of Ethyl
Propylene Diametermine Monomer (EPDM). Corner
brackets made of CRCA with zinc phosphate. Mullion
caps made of Glass filled nylon. The above frames
should be fixed to the concrete/masonry wall by
means of self expanding screws, and complete for
finished item of work Fixed Partition with Door:
Outer frame section size of 46x52mm, mullion section
should be of 46x70mm, fixed beading should be of
18x25mm, section for shutter should be of 46x46mm
and section for middle & bottom should be of size
23x130mm
L SECTION DOORS, SHUTTERS & FRAMES
48
Sl. SS RATE FOR
No 2016-17
I SUB-SECTION DOOR FRAMES

427 TBSC-L.I-01 Mild Steel Hallow single rebate general purpose door 1 Rm 378.00
frames manufactured using cold roll formed process
steel sheet of 1.25 mm thick bright (Cold Rolled Close
Annealed (CRCA) and profile-B of size 105 x 60 mm
conforming to IS 4351 - 2003 including pretreatment,
phosphating with Hinges, Base Ties, Holdfast Lugs,
Mortar Guards, shock absorbers and provision for
Tower Bolts, Aldrops, Lock & Strike plates etc. for
both single and double shutter doors
428 TBSC-L.I-02 Powder Coated Mild Steel Hallow single rebate door 1 RM 696.00
frames manufactured using cold roll formed process
steel sheet of 1.25 mm thick bright (Cold Rolled Close
Annealed (CRCA) and profile size of 105 x 60 mm
conforming to IS 4351 - 2003 including pretreatment,
Galvanized as per IS:277, zinc phosphating finished
with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and
durability/Epoxy polyester powder for powder
coating paint thickness 60 65 microns(Dry film
thickness)Stainless Steel Ball Bearing Butt Hinges 3
mm thick fixed flush to the frame with Hinges, Base
Ties, Holdfast Lugs, Mortar Guards, shock absorbers
and provision for Tower Bolts, Aldrops, Lock & Strike
plates etc. for both single and double shutter doors
429 TBSC-L.I-03 Providing and fixing factory made polyvinyl chloride 1 Rm 325.00
(PVC) Door Frame of the size 50 x 47mm with a wall
thickness of 5mm, made out of extruded 10 mm rigid
PVC foam sheet, mitre cut at two corners and joined
with 2nos. of 150mm long brackets of 15x15mm M.S.
square tube. The two vertical door profiles are to be
reinforced with 19x19mm M.S. Square tube of 19
gauge. The door frame shall be fixed to the wall using
65/100mm long M.S. Screws through the frame by
using PVC fasteners. A minimum of 4nos. of screws to
be provided for each vertical member & minimum
2nos. for horizontal member etc. complete as per
manufacturers specification and direction of
Engineer-in-Charge for finished item of work
49
Sl. SS RATE FOR
No 2016-17
430 TBSC-L.I-04 SUPPLY & FIXING SINGLE SIDE PRELAM SOLID 1 Rm 340.00
PANEL PVC DOOR FRAME (CHOUKHAT) Providing
and fixing factory made Pac single side Prelam door
frame of the size 50X47 mm with a wall thickness of
5mm, made out of extruded 5mm rigid Pac single side
prelam sheet, meter cut at two corners and joined
with 2nos. of 150mm long brackets of 1515mm MS.
Square tube. The two vertical door profiles are to be
reinforced with 19X19mm MS. square tube of
19guage. The door frame shall be fixed to the wall
using 65/100mm long MS. Screws through the frame
by using Pac fasteners. a minimum of 4nos. of screws
to be provided for each vertical member and
minimum 2nos. for horizontal member etc. complete
as per manufacture specification and direction of
Engineer-in-charge.
431 TBSC-L.I-05 Supply and fixing of door frame made of hollow 1 RM 254.00
extruded PVC section having dimensions of 40 X
57mm with the wall thickness of 2mm +/- 0.2mm
duly reinforced with seasoned wood plank at the
hinges side. The door frame top 2 corners shall be
metri-cut/ welded. PVC DOOR FRAME
432 TBSC-L.I-06 Supply and fixing of door frame made of hollow 1 RM 200.00
extruded PVC section having dimensions of 40 X 46
mm with the wall thickness of 2mm +/- 0.2mm duly
reinforced with seasoned wood plank at the hinges
side. The door frame top 2 corners shall be mitre
cut/welded
433 TBSC-L.I-07 Supply & fixing of Door frames made of all formed 1RM 219.00
sections of 1.25mm thick CRCA section, size should be
50x60mm with 32mm rebate. The corner of the
frame should be welded. The frame should be painted
with one coat of primer and finished painted with
pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. complete
for finished item.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section size of 50 x
60 mm
434 TBSC-L.I-08 Supply & fixing of Door frames made of all formed 1 RM 219.00
sections of 1.25mm thick CRCA section, size should be
50x60mm with 32mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. complete
for finished item.: Double shutter 5'-0" x 7'-0" (1524 x
2133.6mm) outer frame section size of 50 x 60 mm
50
Sl. SS RATE FOR
No 2016-17
435 TBSC-L.I-09 Supplying & fixing of Door frame made of roll formed 1 RM 248.00
section of 1.25 mm thick CRCA section, size should be
50 x 75 mm with 32 mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. Complete
for finished item of work.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section size of 50 x
75 mm
436 TBSC-L.I-10 Supplying & fixing of Door frame made of roll formed 1 RM 248.00
section of 1.25 mm thick CRCA section, size should be
50 x 75 mm with 32 mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. Complete
for finished item of work.: Single shutter 5'-0" x 7'-0"
(1524x2133.6mm) outer frame section size of 50 x 75
mm
437 TBSC-L.I-11 Providing and fixing door frames fabricated from 1 RM 759.00
sections made of galvanized steel powder coated
(base steel as per IS 513, galvanized as per IS 277
with zinc of 120 grams / square metre), the factory
made section are powder coated with pure polyester
powder of 50-60 microns thick with total coated
thickness of 1.25 mm, size of door frame section is of
105 x 60 mm with a rebate of 38 mm to accommodate
35 mm thick door shutter, with groove to insert
gasket in the frame section, frame section filled with
polyurethane foam, cut to length, and joined by way
of welding, each frame provided with: a) 2mm thick
MS powder coated butt hinges of 100 mm long 3
Nos. for single shutter, 6 Nos. for double shutter. b)
CRCA electroplates stiffeners of 6 Nos. 3 in each
vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts
screwed to stiffeners 6 Nos. with split end tail. d)
Nylon Aldrop Receiver 1 No. for single shutter
frame. e)Tie Rod 1 No
51
Sl. SS RATE FOR
No 2016-17
438 TBSC-L.I-12 Providing and fixing of door frames factory made, 1 RM 474.00
internal door frames without threshold, fabricated
from pre painted cold roll formed section 100 mm x
60 mm made of galvanized (base steel as per IS-513
D quality galvanized as per IS-277 with Zinc of 120
Gms/sqm) steel colour coated sections with total
coated thickness of 1 mm primer coated with epoxy
primer of 5-7 microns thick finish painted with
polyester paint of 12-16 microns and back coated
with alkyd backer of 5-7 microns, the frame section
filled with polyurethane (PU Foam) of 40 kg/Cum and
the sections cut to length and mitre joined by means
of 1.25 mm thick CRCA electroplated corner brackets
of size 75 x 75 mm and 1.25 mm thick electroplated
stiffeners of size 150 mm for fixing hold fasts and
hinges with MS Powder coated fittings a) 6 Nos M.S. Z
Type hold fasts made of 30 mm x 3 mm MS flat of 230
mm long, 3 Nos each size expandable PVC covered
screw type fasteners b) 2.5 mm x 300 mm long T
hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way
but hinges (3 Nos for single leaf or 2 Nos for Double
leaf/leaf) c) 12 mm Diameter MS tie rod at bottom
with necessary size of nuts on either side.
439 TBSC-L.I-14 Supply and fixing of factory made Bathroom door 1 RM 428.00
frames without threshold, fabricated from pre-
painted cold roll formed section 50mm x 50 mm
made of galvanized steel as per IS 513 D quality,
galvanized as per IS-277 steel colour coated sections
primer coated with epoxy primer finish painted with
polyester paint the frame section filled with
polyurethane (P.U. Foam) of 40 Kg/Cum; and the
sections joined by means of 1.25mm thick CRCA
electroplated corner brackets of size 75 x 75 mm and
1.25mm thick electroplated stiffeners of size 150mm
for fixing hold fasts and hinges together with the
following MS Power coated fitting (Supply and fixing)
of approved make. a) 6 Nos M.S. Z. Type hold fasts
made of 30mm x 3 mm MS flat of 230mm long, 3 Nos
each side expandable PVC covered screw type
fasteners b) 2.5 mm x 300 mm long T hinges /
2.5mm x 50 mm x 100mm two way but hinges (3 Nos
for single leaf or 2 Nos for Double leaf /leaf )c) 12 mm
Diameter MS tie rod at bottom with necessary size of
nuts on either side.
52
Sl. SS RATE FOR
No 2016-17
440 TBSC-L.I-16 Supply of factory made Precast Reinforced Cement 1 RM 330.00
concrete door frame of with overall dimension of 60 x
100 mm for single shutter door (+/-2mm) three nos,
of 6mm dia steel bars are used for longitudinal
reinforcement for each vertical and horizontal
member and are held firmly by 3mm dia ties spaced
at not more than 300mm c/c Polymer wonder blocks
are provided in the frames for tower bolt and hinges
provisions made in the frame for aldrops provisions
are made in the vertical member for fixing of 3 nos.
hold-fasts with 8 mm dia bolts and the frame surface
shall be smooth without any voids and shall confirm
to IS 6523 complete finished item including all taxes
as per specifications & the directions of the Engineer-
in-Charge.
441 TBSC-L.I-18 Supply of factory made Precast Reinforced Cement 1 RM 430.00

concrete double door frame of the door frame shall
have overall dimension of 60 x 125 for single shutter
door(+/-2mm) four nos, of 6mm dia steel bars are
used for longitudinal reinforcement for each vertical
and horizontal member and are held firmly by 3mm
dia ties spaced at not more than 300mm c/c Polymer
wonder blocks for fixing of towerbolt and hinges with
provision for aldrops and 3 nos. hold-fasts with 8mm
dia bolts and the frame surface shall be smooth
without any voids and shall confirm to IS 6523
complete finished item including all taxes as per
specifications & the directions of the Engineer-in-
Charge.
442 TBSC-L.I-20 Fixing of precast RCC frames (Precast RCC framed 1 RM 250.00
members to be supplied at site) including assembling
the members for door frames fixing to MS masonery
or RCC wall face including providing and fixing Six no.
hold-fasts of MS Flat 40x5mm and length 40cm per
frame embedding in cement concrete blocks of size
30x10x15 cm of mix (1 cement:3 Coarse sand: 6
graded stone aggregate 20 mm nominal size)
complete as per specification & the directions of the
Engineer-in-Charge
II SUB-SECTION DOOR SHUTTERS WITHOUT FRAMES

443 TBSC-L.II-01 Flush door shutters, solid bond wood block board 1 Sqm 1,909.00
type with teak ply on both faces.: 25 mm thick
conforming to IS:2202
53
Sl. SS RATE FOR
No 2016-17
type with commercial ply on both faces.: 25 mm thick
type with teak veneer on one face and commercial ply
on another face (lipping): 20 mm thick conforming to
IS:2202
IS:2202
IS:2202
IS:2202
IS:2202
455 TBSC-L.II-13 Supply and fixing of Cement Bonded Prelaminated 1 Sqm 2,450.00
Particle Board single door shutter using 16MM
Cement Bonded Prelaminated Particle Board with all
round section U size of mm thick galvanized pre-
painted cold rolled steel profiles Cement Bonded
Prelaminated Particle Board with necessary screws
fixed at every 10 ( 304.8mm) intervals. The cost
inclusive of MS Nickel coated 250mm long Aldrops 2
nos , MS powder coated 250mm long tower bolt 1
nos, 2nos MS powder coated 125mm long grip
handle, 1 nos M.S.P.C. Door stopper. Including cost
and conveyance of all materials at site labour charges
etc., complete finished item of work.
54
Sl. SS RATE FOR
No 2016-17
Particle Board double door shutter using 16MM
Cement Bonded Prelaminated Particle Board with all
round U section size of 20mm x 18mm x 20mm
made from 0.6mm thick galvanized pre-painted cold
rolled steel profiles with Cement Bonded
Prelaminated Particle Board separating two shutter
with 30mm x 20mm x 30mm stepped lipping with
necessary screws fixed at every 10 (304.8mm)
intervals. The cost inclusive of MS Nickel coated
250mm long Aldrops 2nos, MS powder coated
125mm long grip handle, 2 nos M.S.P.C. Door stopper.
Including cost and conveyance of all materials at site
labour charges etc., complete finished item of work.
Particle Board door shutter made out of U sections of
size 12x14x12 made from 0.6mm thick pps sections
with 12MM Cement Bonded Prelaminated Particle
Board with necessary screws fixed at every
1.0interwells. The hardware consists of 250mm long
Aldrop 2 Nos.150mm Handle- 1 No , 150 mm long
ms powder coated tower bolt 1 no. nickel coated. The
cost is inclusive of all incidentals, labor
transportation charges.
458 TBSC-L.II-16 Supply and fixing of Cement bonded Particle BOARD 1 Sqm 1,650.00
(conforming to IS 14862) door shutter with all-round
style U lipping size 15 x 18 x 15 mm made from 0.8
mm thick powder coated cold rolled steel profiles
with 16 mm thick Cement bonded Particle BOARD
with necessary screws fixed at 1-0 interval 250 mm
long Aldrops 2 nos. M.S. nickel coated 250 mm long 1
no. M.S. Tower Bolts Including cost and conveyance of
all materials at site and applying 1 coat of primer, 2
coats of luppum and 2 coats of synthetic enamel paint
as per approved design for finished item of work.
459 TBSC-L.II-17 Supply and fixing of Cement bonded Particle BOARD 1 Sqm 1,413.00
(conforming to IS 14862) 12 mm thick door shutter
of size 60 x 26 with all-round style U lipping size
15 x 14 x 15 mm made from 0.8 mm thick powder
coated cold rolled steel profiles with necessary
screws fixed at 1-0 interval 250 mm long Aldrops 2
nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance of all materials
at site and applying 1 coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
55
Sl. SS RATE FOR
No 2016-17
460 TBSC-L.II-18 Supply and fixing door shutter with frame made out 1 Sqm 2,610.00
of PVC section and panels conforming to IS:10151-
1982 having panel sizes of 100 mm x 30 mm with self
extruded grooves at 40 mm x 50 mm grooves on front
face and the infill panel dimension is 610 mm x 20
mm seamless hallow multi chambered PVC single
panel for finished item of work.
461 TBSC-L.II-19 Molded panel solid core flush doors using water- 1 Sqm 1,644.00
resistant hardwood fibre HDF / MDF fibre boards
skins of 2.5 mm thick of Masonite or equivalent
doors - 30 mm thick
462 TBSC-L.II-20 Molded panel solid core flush doors using water- 1 Sqm 1,797.00
resistant hardwood fibre HDF / MDF fibre boards
skins of 2.5 mm thick Masonite or equivalent doors -
35 mm thick
463 TBSC-L.II-21 Solid core membrane flush doors using rigid PVC 1 Sqm 1,336.00
membrane of 0.3 mm thick of different elegant shades
doors - 30 mm thick
464 TBSC-L.II-22 Solid core membrane flush doors using rigid PVC 1 Sqm 1,478.00
membrane of 0.3 mm thick of different elegant shades
doors - 35 mm thick
465 TBSC-L.II-23 Providing and fixing 35mm thick FACTORY MADE 1 Sqm 2,900.00
MOULDED DOOR SHUTTER consisting of sold core
single leaf flush door of 30mm thickness, lipped with
15mm (5mmX3) thick X 30mm width on one stiles
and top rails and 10mm (5mmX2) thick X 30mm
width on the other stiles and bottom rails. The inner
panel laminated with 2mm thick termite proof, water
proof and fire resistant molded Pac sheet with 2,4,6
raised panel design in different panel and / or prelam
colours on one side after routing the molded design
on flush door and 2mm prelam Pac sheet on other
side using rubber adhesive on flush door and solvent
cement adhesive on Pac lipping etc. complete as per
direction of Engineer-in-Charge, manufacture
specification and drawing
466 TBSC-L.II-24 Supply & Fixing SOLID STEEL DOOR shutter made 1 Sqm 1,480.00
out of G I Precoated Sheet with an average wall
thickness of 0.35 mm on both sides. MS Tube having
dimensions of 19 x 19 mm is inserted along the hinge
side of the door, core of the door shutter filled with
High Density Polyurethane foam injected with the
help of hydraulic injection method, four sides of the
door covered with G I Precoated Sheet and the
hardware locations reinforced with suitable wooden
blocks as per drawing and stickers indicating location
of the hardware pasted at appropriate places, etc
complete
56
Sl. SS RATE FOR
No 2016-17
467 TBSC-L.II-25 Providing of 35mm thick Facotry made Prelaminated 1 Sqm 6,821.00
ABS (Acrolynitrile Butadyne Styrene) Door shutter
moulded in different designs, consisting of all round
Frame made out of water proof solid foam PVC bar of
size 20x32mm, reinforced by 32x 32mm - 2 nos. for
vertical made out of LVL (Laminated Veneer Lumber),
core material of 32 mm thick high density craft paper
honey comb board, sandwiched on both sides with
prelaminated ABS sheet thickness of 1.5mm . PVC
edge banding of size 0.45mm on the vertical sides.for
each shutter and ISI make S.S round lock complete for
Particle Board door shutter conforming to IS-14276
made out of U sections of size 12 x 18 x 12 made from
0.6mm thick PPS sections with 16 mm Cement
Bonded Prelaminated Particle Board with necessary
screws fixed at every 1.0interwells. The hardware
consists of 12 mm dia x 200mm long Aluminum
Aldrop 2 Nos. 125 mm long Handle- 2 Nos. 3 mm x
12 mm x 180 mm long 304 SS hinges- 3 Nos with pole
receiver of 10mm dia pole X40mm long welded on
2mm X40mm(ss304) plates works as receiver for RT
patte hinges. The cost is inclusive of all incidentals,
labor transportation charges.
III SUB-SECTION DOORS WITH SHUTTERS & FRAMES

469 TBSC-L.III-01 Providing and fixing 30mm thick Solid panel PVC 1 Sqm 2,362.00
door shutter consisting of frame made out of M.S.
tubes of 19 gauge thickness and size of 19mm x
19mm for stiles, & 15mm x 15mm for top & bottom
rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame shall be
covered with 5mm thick heat molded PVC C channel
of size 30 x 50mm forming stiles, and 5mm thick,
75mm wide PVC sheets for top rail, lock rail & bottom
rail on either side, and 10mm (5mm x 2) thick, 20mm
wide cross PVC sheet as gap insert for top rail &
bottom rail. Paneling of 5mm thick PVC sheet to be
fitted in the M.S. frame welded / sealed to the stiles &
rails with 30mm wide x 5mm thick PVC sheet beading
on either side, and joined together with solvent
cement adhesive etc. An additional 5mm thick PVC
strip of 20mm width is to be stuck on the interior side
of the C Channel using PVC solvent adhesive.
Complete as per direction of Engineer-in-charge,
manufacturers specification & drawing for finished
item of work .
57
Sl. SS RATE FOR
No 2016-17
470 TBSC-L.III-02 Providing and fixing 30mm thick FACTORY MADE 1 Sqm 2,700.00
BOTHSIDE PRELAM SOLID PANEL PVC DOOR
SHUTTER consisting of frame made out of MS. Tubes
of 19gauge thickness and size of 19mmX19mm for
stiles, top and bottom rails. MS. Frame shall have a
coat of steel primers of approved make and
manufacture. MS. Frame covered with 5mm thick
heat molded Prelam Pac C channel of size 30mm
thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 450 angle on either
side forming stiles; and 5mm thick, 95mm wide
Prelam Pac sheet out of which 75mm shall be flat
and 20mm shall be tapered in 450 on the inner side
to form top and bottom rail 115mm wide Prelam Pac
sheet out of which 75mm shall be flat and 20mm shall
be tapered on both sides to form lock rail. Top,
bottom and lock rail shall be provided either side of
the panel. 10mm (5mmX2) thick, 20mmwide cross
Pac sheet shall be provided as gap insert for top and
bottom rail. Paneling of 5mm thick both side Prelam
Pac sheet to be fitted in the MS. Frame welded/
sealed to the stiles & rails with 7mm(5mm+2mm)
thick X 15mm wide Pac sheet beading on inner side,
and joined together with solvent cement adhesive etc.
an additional 5mm thick Pac strip of 20mm width is
to be stuck on the interior side of the C channel using
Pac solvent cement adhesive etc. complete as per
direction of Engineer in-charge, manufacture
specification and drawing.
SOLID SINGLE SIDE PRELAM PANEL PVC DOOR
SHUTTER consisting of frame made out of MS. Tubes
of 19gauge thickness and size of 19mmX19mm for
stiles, and 15mmX15mm for top and bottom rails.
The MS. Frame shall have a coat of steel primers of
approved make and manufacture. MS. Frame covered
with 5mm thick heat molded single side Prelam Pac
C channel of size 30mmX50mm to form stiles.5mm
thick& 75mm wide single side prelim Pac sheets shall
be for the top, bottom and lock rails. Paneling of 5mm
thick one side Pac sheet to be fitted in the MS. Frame
and sealed to the front (prelam side) stiles and rails
(which should have a 5mm 45 bent portion as
beading) and attached to the back(white/ivory) stiles
and rails which should have a 10mm 900 bent
portion as beading ) using 2nos. 15mm wide X 5mm
thick Pac sheet beading inside the 90 bent beading.
All stiles, rails and beadings are to be joined to the
panel using solvent cement etc. an additional 5mm
thick Pac strip of 20mm width to be stuck on the
interior side of the C channel using Pac solvent
cement adhesive and 10mm(5mmX2) thick, 20mm
wide cross Pac sheet to be fitted as gap insert for top
and bottom rail etc. complete as per direction of
Engineer in-Charge, manufacture specification and
drawing.
58
Sl. SS RATE FOR
No 2016-17
472 TBSC-L.III-04 MOULDED PVC DOOR WOOD FREE Providing and 1 Sqm 2,475.00
fixing 30mm thick Brand factory made Molded door
shutter- wood free consisting of frame made out of
MS. tubes 19gauge thickness and size of
25mmX25mm for stiles, top and bottom rails. MS.
Frame shall have a coat of steel primers. The inner
panel shall consist of 25mm thick High density EPS
conforming to IS 4671-1984 bounded with 2mm thick
termite proof, water proof and fire resistant molded
Pac sheet with 2,4,6 raised panel design in different
plain and / or prelam colours after routing to the
molded design on one side and 2mm plain and / or
prelam Pac sheet on other side of the EPS. The edge
of panel to be sealed with lipping of 10mm wide PVC
sheet bottom (made by sticking 2 rigid foam sheet of
5mm thickness using Pac solvent cement) and stiles
sides 25mm(5mmX5) thick and 30mm width Pac
sheet fitted along Ms. Tube for lock provision for lock
height 5mm thick Pac sheet of size 150mmX100mm
fixed with upper and lower face of inner side of EPS
Panel etc. Complete as per direction of Engineer in-
Charge, manufacture specification and drawing
WIRE MESH SOLID PVC DOOR SHUTTER consisting of
frame made out of M.S. tubes of 19 gauge thickness
and size of 19mmX19mm for stiles and 15mm for top,
lock & bottom rails. MS. Frame shall have a coat of
steel primers of approved make and manufacture.
19mmX19mm M.S. square tubes shall be covered
with 5mm thick heat molded PVC C channel of size
30mm thickness, 90mm width out of which 75mm
shall be flat and 15mm shall be flat and 15mm shall
be bent in 900 on the inner side to from top and
bottom rail land 130mm wide PVC sheet out of which
100mm shall be flat and 154mm shall be bent in 900
on both side to from lock rail, 10mm(5mmX2) thick,
20mm wide cross PVC sheet as gap insert for top rail
& bottom rail. Panel will be of G.I. wire mesh of
24gauge to be fitted in by C channel of size 35mm
X10mm on the either side in the stiles. The inner side
C channel is fixed by 19mmX19mm MS. Tube on
both sides with screws. The wire mesh in top bottom
& lock rail is sealed with15mm X 15mm tube with G.I.
wire 10mm(5mmX2) thick PVC strip of 25mm width
is to be stuck& nails on both side of G.I. wire mesh
interior at the top, bottom & lock rail. An additional
5mm thick PVC strip of 20mm width is to be stuck on
the interior side of the C channel using PVC solvent
cement adhesive etc. complete as per direction of
Engineer-in-charge, manufacturers specification &
drawings
59
Sl. SS RATE FOR
No 2016-17
474 TBSC-L.III-06 Providing and fixing door & shutter of which frame 1 Sqm 1,943.00
made from 1.2 mm powder coated cold rolled steel
profiles of overall section size of 60 mm x 45 mm with
21 mm rebate for shutter with necessary stiffeners
hinges and screws with Cement bonded Particle
BOARD (IS 14862) shutter with all-round style U
lipping of size 15 x 18 x 15 mm made from 0.8 mm
thick CRCA powder coated steel profile with 16 mm
thick Cement bonded Particle board with necessary
screws fixed at every 1-0 interval 250 mm long
Aldrops 2 nos. M.S. nickel coated 250 mm long 1 no.
M.S. Tower Bolts including cost and conveyance, one
coat of primer, 2 coats of luppum and 2 coats of
synthetic enamel paint as per approved colour,
labour charges etc.
475 TBSC-L.III-07 Doors Frames (Colour Coated Steel Sections) & 1 Sqm 3,845.00
Shutter using Cement Bonded Particle Board as per IS
14276 (Cement Bonded Particle Board conforming to
IS 14276 or equivalent ) : Providing and fixing of door
frame made from cold roll formed sections made of
galvanized (Base steel as per IS277 with zinc of 120
Gms/sqm) colour coated steel sections with total
coated thickness of 1mm, primer coated with epoxy
primer coat of 5-7 microns thick, finish paint with
polyester paint of 12-16 microns. The Section for
door frame is to be filled with polyurethane (P.U)
form of 40kg/m3. Overall size of frame section should
be of 50mm x 50mm. With necessary corner brackets,
stiffeners, hinges, and screws. Cement Bonded
particle board shutter (Cement Bonded Particle
Board conforming to IS 14276 or equivalent ) Single
Leaf with all round styles U section of size 12m x
18m x 12mm made from 0.6 mm thick galvanized,
colour coated cold rolled steel profiles with 16mm
thick Cement Bonded particle Board (Cement Bonded
Particle Board conforming to IS 14276 or equivalent )
with necessary screws fixed at every 1-0 (304.8mm)
intervals. The cost inclusive of MS nickel coated
Aldrop of size 250mm long 2nos. 200mm long tower
bolt 1no., 125mm handles 2nos., cost and conveyance
of all materials at site and applying one coat primer ,
one coat of luppum and two coats of synthetic enamel
paint as per approved design for finished item of
work
60
Sl. SS RATE FOR
No 2016-17
476 TBSC-L.III-08 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 6,252.00
Chloride (UPVC) 2 Track2 Panel Sliding Doors
duly manufactured using UPVC reinforced
profiles(Composition of profile shall consists a
minimum of 5.5 PHR of TiO2 and not more than 12
PHR of CaCo3 for every 100 parts of PVC resin) of 60
mm x 45 mm x 2.20 mm with reinforcement of 1.2
mm thickness, super sash with overall size of 39 mm
x 75 mm x 2.20 mm with for sliding door shutter
frames capable of mounting single glazing system,
structurally reinforced with hot dip galvanized up to
50 microns of minimum thickness of 1.5 mm
prefabricated & welded through fusion welding the
door sash shall be fitted with 6 mm thick clear float
glass of reputed make duly fixed with Grey colour
TPV Gasket for sash & Glazing bead shall be co-
extruded with Grey colour soft PVC. Door shall be
provided with standard hardware & multi point
locking system of bent handle espagulate .the system
is to be installed at the site using anchor fasteners,
silicon rubber sealant, easy glazing/ deglazing at site
etc., including cost and conveyance of all materials,
accessories, labour charges for transportation,
erection at site complete for finished item of work.
Chloride (UPVC) 3 track sliding doors with mesh
shutter provision (2-glass shutters)- 95 -Series
PHR of CaCo3 for every 100 parts of PVC resin) of
(108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm
for outer frames, (75 mm x 39 mm)/(66 mm x 42
mm) x 2.20 mm for sliding door shutter frames
capable of mounting single glazing system,
extruded with Grey colour soft PVC. Door shall be
provided with standard hardware & multi point
locking system of Patio/Bent espagulate .the system
is to be installed at the site using anchor fasteners,
61
Sl. SS RATE FOR
No 2016-17
Chloride (UPVC) 3 track sliding doors with mesh
shutter (2-glass shutters and 1-mesh shutter)- 95
- Series duly manufactured using UPVC reinforced
profiles (Composition of profile shall consists a
PHR of CaCo3 for every 100 parts of PVC resin) of
(108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm
for outer frames, (75 mm x 39 mm)/(66 mm x 42
mm) x 2.20 mm for sliding door shutter frames
capable of mounting single glazing system,
extruded with Grey colour soft PVC. Mesh shutter
shall be made of (48 mm x 30 mm))/(50 mm x 26.5
mm) x 2.0 mm uPVC profile section and fitted with
Vinyl Coated Fiber mesh and rollers/pulley duly fixed
with TPV Gaskets weathering seal resistant Door
shall be provided with standard hardware & multi
point locking system of Patio/Roto espagulate and
the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance
of all materials, accessories, labour charges for
transportation, erection at site complete for finished
item of work.
Chloride (UPVC) sliding doors three track - three
glass shutters sliding - 112 -Series duly manufactured
using UPVC reinforced profiles of 112.0 mm x 60 mm
x 2.25 mm for outer frames, 66 mm x 42 mm x 2.25
mm for sliding door shutter frames capable of
mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns
of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall
be fitted with 5 mm thick clear float glass of reputed
make and fixed with EPDM weathering seal resistant
accessories like clipping locking system made of
aluminium 1 No., per set of sashes and the system is
to be installed at the site using anchor fasteners,
erection at site with templates for casement sizing
complete for finished item of work
62
Sl. SS RATE FOR
No 2016-17
Chloride (UPVC) openable doors with openable
shutters duly manufactured using UPVC reinforced
mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60
mm x 2.40 mm for mullion sections as per the need
and 102 mm x 60 mm x 2.40 mm for openable shutter
frame capable of mounting single glazing system
TPV Gaskets for sash & Glazing bead shall be co-
etruded with Grey colour soft PVC.System shall be
provided with 4 nos of 3D Hinges for each shutter
and multipoint locking with keys.with raiser wedges
for smooth operation and the system is to be installed
at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including
cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site
complete for finished item of work.
481 TBSC-L.III-13 Supplying and fixing door shutter, with shutter frame 1 Sqm 1,038.00
and infill panel made from PVC material conforming
to IS: 10151-1982, the shutter frame made out of PVC
extruded sections having overall dimension of 47 mm
x 33 mm with wall thickness of 1.2mm + 0.3mm with
usual process variation, the shutter frame with
tapered shape to provide better grip to the infill panel
end to drain out the water The Infill panel is made out
of PVC Sections having Overall Dimensions of 200
mm x 20 mm with wall thickness of 1mm + 0.2mm,
the shutter frames mitre cut and joined at the corner,
by providing Polymeric L type corners to take
hardware & fixtures fixed with 10-20mm counter
sunk fully threaded parallel shank steel screws, all the
hardware locations reinforced with special polymeric
bars as per drawings, stickers showing locations of
different hardware pasted on the shutter, the infill
panels joined by tongue and groove method.
63
Sl. SS RATE FOR
No 2016-17
482 TBSC-L.III-14 Supply and fixing of door shutters made of rigid PVC 1 Sqm 1,923.00
extruded hollow section(Nandi or equivalent ) of
20mm X 200 mm with the wall thickness of 1.0mm
+/- 0.1mm equally divided into 4 no's with tongue
and groove locking arrangements. The shutter frame
is made of 30mm X 79mm with the wall thickness of
1.5mm +/-0.15mm section mitre-cut and joined at 4
corners with 125mm X 225mm plastic brackets. The
shutter shall be horizontally reinforced with 2 no's of
8mm PVC rods. Teak wood batons shall be reinforced
inside the door shutter during the fabrication of the
door shutter at those points wherever the hardware
is fixed onto the door shutter.
483 TBSC-L.III-15 Providing & fixing 30 mm thick solid panel PVC door 1 Sqm 3,030.00
shutter consisting of frame made out of 19 gauge M.S
tube of 19 x 19 mm for stiles, top & bottom rail, with a
coat of primer of approved make. M.S. Frame
covered with 5 mm thick heat molded PVC C
channel of size of 30 x 50 mm forming stiles, 5 mm
thick 75 mm wide PVC sheet for top, lock & bottom
rail on either side 20 mm wide cross PVC sheet as
gap insert for top & bottom rail, paneling of
10mm(+/-)( 5mm+5mm) thick PVC sheet fitted in
the M.S. frame welded /sealed to the stiles, on either
side joined together with solvent cement adhesive
etc., additional 5 mm thick PVC strip of 20 mm width
stuck on the interior side of the C channel using
solvent cement, complete as per direction of
Engineerincharge, manufacturers specification.
484 TBSC-L.III-16 Supplying & fixing SINGLE PANEL 30 mm thick PVC 1 Sqm 2,604.00
DOOR, door shutters with shutter frame and Infill
panel made from PVC material, the shutter frame
made out of PVC extruded sections having overall
dimensions of 6 0mm x 30 mm with wall thickness of
1.3 mm 0.3 mm, with the Infill panel made out of
multi chambered seamless hollow PVC extruded
panel having overall dimensions of 610 mm x 20 mm
having wall thickness 1 mm 0.2 mm with the
shutter frame meter cut and joined at corners and all
the hardware locations reinforced with special
polymeric bars as per drawing including providing
special PVC bracket on hinge side, etc complete
64
Sl. SS RATE FOR
No 2016-17
485 TBSC-L.III-17 Providing & fixing internal prelaminated PVC door 1 RM 601.00
frame of size 100 x 45 mm with a wall thickness of
5mm, made of extruded 5 mm Prelam PVC foam
sheet, mitred cut at two corners and joined with two
nos. of 150mm long brackets of 15 x 15 mm MS
square tube, two vertical door profiles reinforced
with 40 x 20 MS Tube of 19 gauge throughout the
frame and the door frame fixed to the wall using
65/100mm long MS screws through the frame by
using PVC fasteners with a minimum of 3 nos of
screws provided for each vertical member and two
nos. for horizontal, etc complete as per drawing
and direction of Engineer in Charge
486 TBSC-L.III-18 Supply & Fixing of Powder Coated Mild Steel doors, 1 Sqm 11,139.00
frames & shutters made of Skin pass galvanized Iron
sheet conforming to Base Steel as per IS 513 D
Quality, Galvanized as per IS 277 with Hot Zinc
Coating of 120 grams / Sq.Mtr with powder coating
of thickness 60-65 Microns, frame with 1.2mm thick
Skin pass Galvanized Iron sheet formed to single
rebate profile of size 100 mm X 58 mm and filled with
in-fill Polyurethane foam, the Door Shutters are with
0.80 mm thick Skin pass Galvanized Iron Sheet
formed to provide a 46 mm thick fully flush, double
skin door shell with Lock Seam joints at stile edges,
fitted with in-fill of Honeycomb Kraft Paper and
coated with polyester powders of Pure polyester/
epoxy polyester or polyurethane powder for powder
coating of thickness 60 65 microns and are coated
with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane
paint of Aliphatic Grade providing high levels of
scratch resistance and durability, the Shutter
provided with 6 MM clear float vision glass in
Circular, Square or Rectangular shapes, Stainless
Steel Ball Bearing Butt Hinges 3 mm thick fixed flush
to the frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever Handles, Mortise
Dead Bolt, etc for industrial, commercial, residential,
clean room applications
65
Sl. SS RATE FOR
No 2016-17
487 TBSC-L.III-19 Providing & Fixing of Scientific Doors with metal door 1 Sqm 10,283.00
frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 with Zinc of 120 GSM)coated
scratch resistance and durability/Epoxy polyester
powder for powder coating paint thickness 50-60
microns (Dry film thickness) outer frame section of
100 x 58 mm x 1.2 mm thick, shutter section of 0.80
mm thick galvanized steel sheet pressed (roll formed)
for 46mm thick fully flush, double skin door shell
seam joints at stile edges, in-fill of honeycomb kraft
paper used to give the required rigidity and effective
acoustic insulation with 6 Tower bolt 1 No., 6 D
handles 2 Nos., 10 Aldrop 1 No., Butt Hinges 3
Nos, Mortise Lock of approved quality 1 No, frames
fixed to the concrete/masonry wall by means of self
expanding screws complete for finished item of work
for Single leaf Door
488 TBSC-L.III-20 Providing & Fixing of Scientific Doors with metal door 1 Sqm 10,968.00
frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 with Zinc of 120 GSM).
coated with Zinc Phosphate Primer to receive any
paint on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade providing high
levels of scratch resistance and durability/Epoxy
polyester powder for powder coating paint thickness
50-60 microns (Dry film thickness) outer frame
section of 100 x 58 mm x 1.2 mm thick, shutter
section of 0.80 mm thick galvanized steel sheet
pressed (roll formed) for 46mm thick fully flush,
double skin door shell seam joints at stile edges, in-fill
of honeycomb kraft paper used to give the required
rigidity and effective acoustic insulation with 6
Tower bolt 2 Nos., 6 D handles 2 Nos., 10 Aldrop
1 No., Butt Hinges 6 Nos, Mortise Lock of
approved quality 1 No, frames fixed to the
concrete/masonry wall by means of self expanding
screws complete for finished item of work for Double
leaf Door
66
Sl. SS RATE FOR
No 2016-17
489 TBSC-L.III-21 Supply & Fixing of Stainless steel doors, frames & 1 Sqm 20,886.00
shutters made of stainless steel grade 304 of hairline
finish, frame with 1.2mm thick formed to single
rebate profile of size 100 mm X 58 mm and filled with
0.80 mm thick Stainless steel Sheet formed to provide
a 46 mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges, fitted with in-fill of
Honeycomb Kraft Paper, the Shutter provided with 6
MM clear float vision glass in Circular, Square or
Rectangular shapes, Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame and
shutter (Profile 102x76x3mm thick).Mortise Sash
Lock with Lever Handles, Mortise Dead Bolt, etc for
industrial, commercial, residential, clean room
applications
490 TBSC-L.III-22 Supply & Fixing of Powder Coated Fire Rated doors, 1 Sqm 13,228.00
Skin pass Galvanized Iron sheet formed to double
rebate profile of size 143 mm X 58 mm with
maximum bending radius of 1.4 mm and filled with
Dead Bolt, etc for 120 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
67
Sl. SS RATE FOR
No 2016-17
491 TBSC-L.III-23 Supply & Fixing of Powder Coated Fire Rated doors, 1 Sqm 12,532.00
Skin pass Galvanized Iron sheet formed to double
rebate profile of size 143 mm X 58 mm with
maximum bending radius of 1.4 mm and filled with
Dead Bolt, etc for 60 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
492 TBSC-L.III-23 Supply & Fixing of Stainless steel Fire Rated doors, 1 Sqm 20,886.00
frames & shutters made of Stainless steel of 304
grade hairline finish, frame with 1.2mm thick
Stainless steel of 304 grade hairline finish sheet
formed to double rebate profile of size 143 mm X 58
mm with maximum bending radius of 1.4 mm and
filled with in-fill Polyurethane foam, the Door
Shutters are with 0.80 mm thick Stainless steel of 304
grade hairline finish Sheet formed to provide a 46
mm thick fully flush, double skin door shell with Lock
Seam joints at stile edges, fitted with in-fill of
Honeycomb Kraft Paper and coated with polyester
powders of Pure polyester/ epoxy polyester or
polyurethane powder for powder coating of
thickness 60 65 microns and are coated with Zinc
Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch
resistance and durability, the Shutter provided with 6
120 minutes Fire Rated door conforming to IS:3614
(Part2) 1992
68
Sl. SS RATE FOR
No 2016-17
493 TBSC-L.III-24 Supply & Fixing of Stainless steel Fire Rated doors, 1 Sqm 18,209.00
frames & shutters made of Stainless steel of 304
grade hairline finish, frame with 1.2mm thick
Stainless steel of 304 grade hairline finish sheet
formed to double rebate profile of size 143 mm X 58
mm with maximum bending radius of 1.4 mm and
filled with in-fill Polyurethane foam, the Door
Shutters are with 0.80 mm thick Stainless steel of 304
grade hairline finish Sheet formed to provide a 46
mm thick fully flush, double skin door shell with Lock
Seam joints at stile edges, fitted with in-fill of
Honeycomb Kraft Paper and coated with polyester
powders of Pure polyester/ epoxy polyester or
polyurethane powder for powder coating of
thickness 60 65 microns and are coated with Zinc
Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch
resistance and durability, the Shutter provided with 6
60 minutes Fire Rated door conforming to IS:3614
(Part2) 1992
494 TBSC-L.III-25 Supply & Fixing of Lead Lined Clean room doors 1 Sqm 14,995.00
frames and shutters made of Skin pass galvanized
Iron sheet (Conform to Base Steel as per IS 513 D
Coating of 120 grams / Sq.Mtr).with powder coating
of thickness 60-65 Microns, frame of 1.60mm thick
galvanized steel sheet (Conform to IS 277) formed to
Single/double rebate profile of size 100mm X 58mm/
143x58mm, door frames with a single / multi Layer
of Lead sheet varying thickness from 3mm /1mm to
2mm depends on radiation level, the shutter with 1.2
mm thick Galvanized Steel Sheet (Conform to IS 277)
formed to provide a 46mm thick fully flush, double
skin door shell with Lock Seam joints at stile edges
with a single / multi Layer of Lead sheet varying
thickness from 3mm /1mm to 2mm depends on
radiation level, the lead sheets extend the full width
and height of the door, Lead thickness is equal to the
shielding in the adjacent wall, the door frames and
door shutters are coated with polyester powders of
Pure polyester/ epoxy polyester or polyurethane
powder for powder coating of thickness 60 65
microns, coated with Zinc Phosphate Primer to
receive any paint on site or finished with
Thermosetting Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance and
durability, hardware with Stainless Steel Ball Bearing
Butt Hinges 3 mm thick fixed flush to the frame and
shutter etc complete for finished item
69
Sl. SS RATE FOR
No 2016-17
495 TBSC-L.III-26 Supply & Fixing of Lead Lined Stainless steel Clean 1 Sqm 23,671.00
room door frames and shutters made of Stainless
steel grade of 304 hairline finish, frame with 1.60mm
(16SWG) thick hairline finish Stainless steel grade of
304 formed to Single/double rebate profile of size
100 mm x 58mm/ 143 x 58 mm, door frames with a
single / multi Layer of Lead sheet varying thickness
from 3mm /1mm to 2mm depends on radiation level,
the shutter with 1.2 mm thick hairline finish Stainless
steel grade of 304 formed to provide a 46mm thick
fully flush, double skin door shell with Lock Seam
joints at stile edges with a single / multi Layer of Lead
sheet varying thickness from 3mm /1mm to 2mm
depends on radiation level. The lead sheets extend
the full width and height of the door. Lead thickness
is to be equal to the shielding in the adjacent wall.
Hardware can be provided with Stainless Steel Ball
Bearing Butt Hinges 3 mm thick fixed flush to the
frame and shutter etc complete for finished item of
work
496 TBSC-L.III-27 Providing of Factory made prelaminated FPVC 1 Sqm 8,388.00

(Foamed Polyvinyl Chloride) Door frame of the size
105x40mm with a wall thickness of 10mm made out
of extruded rigid FPVC profile mitre joined with 6
Nos. of 50mm long screw. The door frame shall be
fixed to the wall by using 80mm long screws through
the frame with the help of PVC fasteners of 3 no's to
be provided for each vertical member,GI stiffners of
("U" chanel of size 29x9x1mm, 150mm long) -3 no's
at hinge point,Frame reinforcement of("U" GI chanel
of size 46x22x.06mm),Bottom tie rod of ("U" GI
chanel size of 15x15x1mm) etc. complete as per
manufacturers specification for finished item of work.
Maximum door frame size : 980 x 2070
including providing of 35mm thick Facotry made
Prelaminated ABS (Acrolynitrile Butadyne Styrene)
Door shutter moulded in different designs, consisting
of all round Frame made out of water proof solid
foam PVC bar of size 20x32mm, reinforced by 32x
32mm - 2 nos. for vertical made out of LVL
(Laminated Veneer Lumber), core material of 32 mm
thick high density craft paper honey comb board,
sandwiched on both sides with prelaminated ABS
sheet thickness of 1.5mm . PVC edge banding of size
0.45mm on the vertical sides. Hardware made out of
steel coated butterfly hinges - 3 Nos. for each shutter
and ISI make S.S round lock completes for finished
item of work.
Maximum shutter size of : 910 x 2030 mm
70
Sl. SS RATE FOR
No 2016-17
497 TBSC-L.III-28 Supply and fixing of toilet door shutter with frame 1 Sqm 3,760.00
made of M.S. door frame of 5 mm x 48 mm x 48 mm
(L angel) as all-round frame the frame is coated with
one coat of red oxide and two coats of enamel of
approved color. For shutter and the shutter is made
with 16mm Bison lam shutter with all-round U
Lipping of PPS section of 12 mm x 18 mm x 12 mm x
0.60mm, along hardware of 200m long and 12mm dia
aluminum aldrop 2 Nos, 2Nos of 125m m handle, 3
Nos of RT patte hinges IS 304gr SS
2mmX12mmX180mm long with a pole receiver of
10mmDia x 40mm by welded on 3mm x 40mm SS
304, plate it works as receiver for RT Patee hinges it
is welded to M.S. angle . M.S. angle will be fixed to wall
of self expandable screws and caps
IV SUB-SECTION CUP-BOARD DOORS

498 TBSC-L.IV-01 Supply and fixing of cup board frames and shutters 1 Sqm 2,350.00
and using 16mm Cement Bonded Particle Board
conforming to IS 14276 duly painted both sides with
one coat of primer and two coats of synthetic /
enamel paint of approved shade and brand including
fixing of hardware like M.S. powder coated Piano
hinges of size 18mm x 18mm, brass ball catches,
Aluminum tower bolts and handles , Godrej locks,
synthetic glue, screws and nails including cost and
conveyance of all materials, labor charges, all
incidental and operational charges etc., complete for
finished item of work at site as per the directions of
Engineer in Charge.
499 TBSC-L.IV-02 Supply and fixing of box type cup board using Cement 1 Sqm 3,862.00
Bonded Particle Board conforming to IS 14276 for
making frame of size 100mm x 35mm using two
sandwiched 16MM boards, one Cement Bonded
Particle Board conforming to IS 14276 and one
Cement Bonded Prelaminated Particle Board with
plain 35mm wood lipping. The Shutters are made of
16MM thick Cement Bonded Prelaminated Particle
Board (Pre-Laminated Cement Bonded Particle
Board) of approved shade inclusive of hardware like
M.S. powder coated Piano hinges of size x ,
Aluminum powder coated handles of size 4
(101.6mm), Aluminum tower bolt 4 (101.6mm)
Godrej locks, screws, wood lipping and synthetic glue
etc., complete finish item of work.
71
Sl. SS RATE FOR
No 2016-17
500 TBSC-L.IV-03 Supply and fixing of PVC cupboards for kitchen and 1 Sqm 4,338.00
bedrooms shall be made out of multi chambered PVC
sections having overall dimensions of 20 X 762mm
with a wall thickness of 1.2mm 0.3mm. The
cabinets shall be made as per the requirements of the
room with groove system. The PVC section surface
shall be plain and laminated finish to have good look,
completed, for finished item of work for SINTEX OR
equivalent PVC CABINETS
501 TBSC-L.IV-04 Supply and fixing of cupboard shutter using 1 Sqm 4,331.00
teakwood scantling of size 50 mm x 50 mm teakwood
as outer frame and 50 mm x 30 mm of size teakwood
for shutter frames, 8mm thick Bison Lam as panel to
each shutter consist of 2 Nos 75mm long tower bolt
2 nos 75 mm big handle the and other shutter will
have 1 no of cupboard lack , 1 No of 75 mm long
handle and 75 mm x 10mm x 1mm thick SS hinges- 2
Nos for each shutter. The above frame will be fixed to
the wall with screws, the rate inclusive of screws,
handle, etc., complete at site of work
M SECTION WINDOWS
I SUB-SECTION OPENABLE WINDOWS

502 TBSC-M.I-01 Supply and fixing of pre-painted steel casement/ 1 Sqm 6,316.00
open able windows base steel as per IS 513 of - 0.58
mm thick 'D quality, galvanized as per IS 277, finish
painted with a polyester paint, section for outer
frame of 46 x 52 mm section for shutter of 46 x 46
mm section for mullion 46 x 70 mm, and section for
beading 18 x 25 mm panelled with 5 mm thick plain
float glass fitted with EPDM gaskets, handle made of
high grade aluminium powder coated frames fixed to
the concrete /masonry wall by means of self
expanding screws including 10 mm square guard
bars @ 150 mm pitch for Windows: Double shutter
for sizes 2'0 x 4'0 (609.6 x 1219.2 mm ) 3'-0 x 4'-0
(914.4mm x 1219.2 mm) without mullion section
72
Sl. SS RATE FOR
No 2016-17
with mullion section for sizes 3'-0 x 4'-0 (914.4mm x
1219.2 mm) and 4'-0 x 4 '-0 (1219.2x1219.2mm)
4'-0 x 4 '-0 (1219.2x12.19.2mm) without Mullion
section
with Mullion section for sizes 4'-6 x 4 '-6
(1371.6x1371.6mm) 5'-0 x 4'-0 (1524x1219.2mm)
and 6'-0 x 4'-0 (1828.8x1219.2mm) and 6'-0 x 4'-6
(1828.8x1371.6mm)
73
Sl. SS RATE FOR
No 2016-17
506 TBSC-M.I-05 Providing and fixing of Casement/ Open able 1 Sqm 5,770.00
Windows made of pre-painted steel as per IS 513 of
0.58 mm thick galvanized as per IS 277, finish painted
with a polyester paint and section for outer frame of
48 x 50 mm, centre mullion of 48 x 50 mm, section for
shutter of 48 x 25 mm and the fixed glass beading
section should be 12 x 12 mm and the outer frame
and mullions to have rebate for glazed shutter with a
20 mm provision for guard bars/grills, handle, stay, 2
nos. of stainless steel heavy duty pivot hinges
provided per shutter and windows fitted with 5 mm
thick plain float glass with rubber gaskets including
fixing the frames in concrete/masonry wall by means
of self expanding screws, Including 10mm Square
guard bars with 6 (152.4mm) pitch etc., complete
Single shutter Window without vertical mullion for
size 20x40 (609.6mm x 1219.2mm)
Double shutter Window with vertical mullion for
sizes 30 x 40 (914.4mm x 1219.2mm) and 40 x
40 (1219.2mm x 1219.2mm)
74
Sl. SS RATE FOR
No 2016-17
Centre fixed both side open able shutter window for
sizes 50x40 (1524mm x1219.2mm) and 60x40
(1828.8mm x1219.2mm)
509 TBSC-M.I-08 Providing & Fixing of Open able Windows with Fly- 1 Sqm 7,652.00
mesh made of pre-painted steel as per IS 513 of 0.58
mm thick galvanized as per IS 277 finish painted with
a polyester paint and the section for outer frame of 72
x 55mm, centre mullion of 72 x 50mm, section for
fixed glass beading section of 12 x 12 mm and section
for shutters of 48 x 25 mm and outer frame & mullion
sections with rebate for glazed shutters, fly mesh and
a 20 mm provision for guard bars/grills and fly mesh
shutter section of 20 x 40 mm, stay, handles, latch 2
Nos of heavy duty stainless steel pivot hinges per
shutter and panelled with 5mm thick plain float glass
and S.S. Mesh for fly mesh shutter (304 grade), fitted
using rubber gaskets including fixing the windows in
the concrete/masonry wall by means of self
expanding screws, including 10mm Square guard
bars with 6 (152.4mm) pitch , complete for Single
shutter Window 20x40 (609.6mm x 1219.2mm)
75
Sl. SS RATE FOR
No 2016-17
bars with 6 (152.4mm) pitch , complete for Double
shutter Window with vertical mullion of sizes 30 x
40 ( 914.4mm x 1219.2mm) and 40 x 40
(1219.2mm x 1219.2mm)
bars with 6 (152.4mm) pitch , complete for Centre
fixed both side open able shutter window for a size
50x40 (1524mm x1219.2mm).
76
Sl. SS RATE FOR
No 2016-17
bars with 6 (152.4mm) pitch , complete for a size
60x40 (1828.8mm x1219.2mm)
513 TBSC-M.I-12 Providing & Fixing of Mesh windows made of pre- 1 Sqm 4,766.00
painted steel (Base Steel as per IS 513 of 0.58mm
thick galvanized as per IS 277 primer coated with
epoxy primer finish painted with a polyester paint,
section for outer frame of 47 x 36 mm, centre mullion
of 60 x 36 mm, section mesh beading 18 x 6 mm and
Fly mesh shutter section of 20 x 40 mm, the sections
cut to length meter joined with corner bracket and
centre mullions fixed with mullion cap, handles, latch,
2 Nos of heavy duty stainless steel pivot hinges per
S.S. Mesh for fly mesh shutter (304 grade) including
fixing the frames in the concrete/masonry wall by
means of self expanding screws complete for finished
item of work.
77
Sl. SS RATE FOR
No 2016-17
514 TBSC-M.I-13 Providing and fixing of Open able / Casement 1 Sqm 5,088.00
0.80 mm thick galvanized as per IS 277 finish painted
shutter of 52 x 25 mm x 0.6 mm thick, outer frame
provision for guard bars/grills, centre mullion fixed
with mullion cap, 1 No. of High grade nylon latch
handle, window stopper, 2 nos. of with MS Powder
coated /SS ball bearing butt Hinges provided per
shutter and windows fitted with 4 mm thick plain
float glass with rubber gaskets including fixing the
frames in concrete/masonry wall by means of self
expanding screws, Including 10 mm Square guard
bars with 6 (152.4mm) pitch etc., complete for Single
open able shutter window size of 2 0 x 4 0 (609.6 x
1219.2mm)
bars with 6 (152.4mm) pitch etc., complete for
Double open able shutter window Size of 3 0 x 4 0
(914.4mm x 1219.2mm) and 40 x 40 (1219.2mm x
1219.2mm)
78
Sl. SS RATE FOR
No 2016-17
bars with 6 (152.4mm) pitch etc., complete for 50 x
40 ( 1524 x 1219.2mm) and 60 x40 ( 1829.6 x
1219.2mm)
Windows with fly mesh made of pre-painted steel as
per IS 513 of 0.80 mm thick galvanized as per IS 277,
finish painted with a polyester paint and section for
outer frame of 100 x 45 mm, centre mullion of 100 x
60 mm, section for shutter of 52 x 25 mm x 0.6 mm
thick, section for fly-shutter of 52 x 25 mm x 0.6 mm
thick and fitted with stainless steel 32 gauge fly mesh
of 304 grade and mullions to have double rebate for
glazed shutter and fly-shutter with a provision for
guard bars/grills and the sections, 1 No. of High grade
nylon latch handle, window stopper, 2 nos. of with MS
Powder coated /SS ball bearing butt Hinges provided
per shutter and windows fitted with 4 mm thick plain
bars with 6 (152.4mm) pitch etc., complete for 2 0
x 4 0 (609.6 x 1219.2mm)
79
Sl. SS RATE FOR
No 2016-17
bars with 6 (152.4mm) pitch etc., complete for 3 0
x 4 0 (914.4mm x 1219.2mm) and 40 x 40
(1219.2mm x 1219.2mm)
bars with 6 (152.4mm) pitch etc., complete for 50 x
40 ( 1524 x 1219.2mm) and 60 x40 ( 1829.6 x
1219.2mm)
80
Sl. SS RATE FOR
No 2016-17
520 TBSC-M.I-19 Galvanized powder coated Casement Windows with 1 Sqm 5,685.00
open able shutters duly manufactured using pressed
steel sections in mild steel conforming to IS 513 of
having 1.0 mm thick and galvanized as per IS 277 of
120 GSM surface treatment with pure polyester
powder coating of 30-40 microns thick and section
for outer frame of 60x50mm, centre for mullion of
62x50mm, section for shutter of 52 x 22 mm, outer
frame and mullions to have one side rebate for glazed
shutter of size 24 mm and 10x10 mm square guard
bars provided at 125 mm c/c the sections assembled
with bolt & nut assembly with zinc-electroplated M-5
bolts, GI Handle of size 80 mm x 15 mm -1 No per
shutter, 2 nos of stainless steel heavy duty pivot
hinges of size 3 of SS 304 Grade per shutter, window
panes with 5 mm thick plain float glass and fixed with
glass beading section of 10x12 mm size with 0.8 mm
thick powder coated aluminium 'U' channel and
window frames fixing to the concrete/masonry wall
arrangement with self expanding screws, complete
for finished item of work including of all taxes - 1220
x 1372 or below size
62x50mm, section for shutter of 52 x 22 mm, outer
frame and mullions to have one side rebate for glazed
shutter of size 24 mm and 10x10 mm square guard
bars provided at 125 mm c/c the sections assembled
with bolt & nut assembly with zinc-electroplated M-5
bolts, GI Handle of size 80 mm x 15 mm -1 No per
shutter, 2 nos of stainless steel heavy duty pivot
hinges of size 3 of SS 304 Grade per shutter, window
panes with 5 mm thick plain float glass and fixed with
glass beading section of 10x12 mm size with 0.8 mm
thick powder coated aluminium 'U' channel and
window frames fixing to the concrete/masonry wall
arrangement with self expanding screws, complete
for finished item of work including of all taxes - 1530
x 1372 or above size
81
Sl. SS RATE FOR
No 2016-17
62x88 mm, section for glass and fly-proof mesh
shutter of 52 x 22 mm, outer frame and mullions to
have two sides rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at
125 mm c/c the sections assembled with bolt & nut
assembly with zinc-electroplated M-5 bolts, GI Handle
of size 80 mm x 15 mm -1 No per shutter, 2 Nos of
stainless steel heavy duty pivot hinges of size 3 of SS
304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading
section of 10x12 mm size with 0.8 mm thick powder
coated aluminium 'U' channel and fly-proof mesh of
SS 304 grade fixed with 18 mm x 12 mm BT wood
beading and window frames fixing arrangement to
the concrete/masonry wall with self expanding
screws, complete for finished item of work including
of all taxes - 1220 x 1372 or below size
62x88 mm, section for glass and fly-proof mesh
shutter of 52 x 22 mm, outer frame and mullions to
have two sides rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at
125 mm c/c the sections assembled with bolt & nut
assembly with zinc-electroplated M-5 bolts, GI Handle
of size 80 mm x 15 mm -1 No per shutter, 2 Nos of
stainless steel heavy duty pivot hinges of size 3 of SS
304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading
section of 10x12 mm size with 0.8 mm thick powder
coated aluminium 'U' channel and fly-proof mesh of
SS 304 grade fixed with 18 mm x 12 mm BT wood
beading and window frames fixing arrangement to
the concrete/masonry wall with self expanding
screws, complete for finished item of work including
of all taxes - 1530 x 1372 or above size
82
Sl. SS RATE FOR
No 2016-17
524 TBSC-M.I-23 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 6,471.00
Chloride (UPVC) casement windows open able
profiles of (48 mm x 60 mm)/ (58 mm x 60 mm) x 2.0
mm for outer frames, (64 mm x 60 mm)/(72 mm x
60mm) x 2.0 mm for mullion sections for two or more
open able shutters and (78 mm x 60 mm)/(72 mm x
42 mm) x 2.0 mm for outward open able shutter
frame or (70 mm x 60 mm)/ (72 mmx 42 mm) x 2.0
mm for inward open able shutter frame capable of
mounting single glazing system structurally
reinforced with hot dip galvanized up to 50 microns
of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall
be fitted with 5 mm thick clear float glass of reputed
make duly fixed with TPV Gaskets/ EPDM weathering
seal resistant accessories for casement window -
friction stay hinges of stainless steel grade 304- 2
Nos., per sash, handle with mazak alloy casting 1 No.
per sash, locking system suitably concealed 1 No., per
sash provided with raiser wedges for smooth
operation and the system is to be installed at the site
using anchor fasteners, silicon rubber sealant, easy
glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour
charges for transportation, erection at site with
templates for casement sizing complete for finished
item of work
525 TBSC-M.I-24 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 7,756.00
Chloride (UPVC) casement windows openable
mm x 2.40 mm for mullion sections for two or more
openable shutters 75 mm x 60 mm x 2.40 mm for
openable shutter frame capable of mounting single
glazing system structurally reinforced with hot dip
galvanized up to 50 microns of minimum thickness of
1.0/1.2 mm prefabricated & welded through fusion
welding.The window sash shall be fitted with 5 mm
thick clear float glass of reputed make duly fixed with
Grey colour TPV Gasket for sash & Glazing bead shall
be co-extruded with Grey colour soft PVC and
accessories for casement window friction hinges of
stainless steel grade 304/430- 2 Nos., per sash,
handle with zamak alloy casting 1 No. per sash,
multipoint locking system suitably concealed 1 No.,
per sash provided with raiser wedges for smooth
operation and the system is to be installed at the site
using anchor fasteners, silicon rubber sealant, easy
glazing/ deglazing at site etc., including cost and
charges for transportation, erection at site complete
for finished item of work.
83
Sl. SS RATE FOR
No 2016-17
II SUB-SECTION SLIDING WINDOWS
526 TBSC-M.II-01 Providing and Fixing Pre painted Steel Sliding 1 Sqm 6,783.00
Window 2 Track-2 Panel Sliding Window fabricated
from Roll formed sections made of galvanized Steel
colour coated/powder coated (Base Steel as per IS
513 D quality, galvanized as per IS 277 with zinc of
120 GM/Sq.mtr) with total coated thickness of
0.58mm. Primer coat with epoxy primer of 5-7
12-16 microns thick and back coated with Alkyd
backer of 5-7 microns or powder coated with pure
polyester powder up to 50-60 microns thick. Section
for external frame should be of 59x44mm, Section for
shutter should be of 35x50mm. The windows should
be paneled with 5mm thick plain float glass. Corner
bracket for internal and external frame made of glass
filled nylon. Gaskets are to be made of Ethyl
Propylene Diamine Monomer (EPDM).The sections
are to be cut to length, joined and assembled by
means of corner bracket. The above frames should be
fixed to the concrete/masonry walls by means of self
expanding brackets & screws including 10mm square
guard bars with 6 pitch (152.4mm) and all Taxes
527 TBSC-M.II-02 Providing and fixing of Two shutter Sliding Windows 1 Sqm 5,302.00
made of Galvanized Steel as per IS 513, D quality,
galvanized as per IS 277 with powder coated with
Pure polyester powder up to 50-60 microns thick
with total coated thickness of 0.8 mm for Outer
Frame and 0.58 mm thickness for Sliding Shutter
Section, the Outer Frame for Two Tracks without grill
provision is of 75 mm x 50 mm and the Window
Shutter section of 58 mm x 36 mm and the outer
Frame with two integrated guide tracks of 12mm
width and 24mm deep for provision to slide the
Shutter / sash frame and facilitates with a water
drain outlet component made of PVC and the shutter
frame fitted with 5mm thick plain float glass of
reputed make and fixed with EPDM weathering seal
resistant accessories and handle made of Alumimium
1 No. per each shutter including installation of
window system at site using anchor fasteners, Silicon
sealant applied at the Outer frame corners inclusive
of conveyance of all materials accessories, labour
charges, and erection at site with complete finished
item of work for Window with Two Sliding Shutters
and without Grill
84
Sl. SS RATE FOR
No 2016-17
528 TBSC-M.II-03 Providing and fixing of Two shutter Sliding Windows 1 Sqm 5,880.00
made of Galvanized Steel as per IS 513, D quality,
galvanized as per IS 277 with powder coated with
Pure polyester powder up to 50-60 microns thick
with total coated thickness of 0.8 mm for Outer
Frame and 0.58 mm thickness for Sliding Shutter
Section, the Outer Frame for Two Tracks with Grill
provision size of 90 mm x 50 mm and the Window
Shutter section of 58 mm x 36 mm and the outer
Frame with two integrated guide tracks of 12mm
width and 24mm deep for provision to slide the
Shutter / sash frame and facilitates with a water
1 No. per each shutter including installation of
item of work for Window with Two Sliding Shutters
and with Grill
529 TBSC-M.II-04 Providing and fixing of Three shutter Sliding 1 Sqm 6,212.00
Windows made of Galvanized Steel as per IS 513, D
quality, galvanized as per IS 277 powder coated with
Pure polyester powder and thickness of 0.8 mm for
Outer Frame and 0.58 mm thickness for Sliding
Shutter Section, with two integrated guide tracks of
12mm width and 24mm deep for provision to slide
the Shutter / sash frame and facilitates with a water
1 No. per each shutter and including installation of
item of work for i) Center Shutter Fixed: center
shutter frame made of section with size 20mm x
47mm should be fitted with 5mm thick plain float
glass of reputed make, EPDM gasket all around the
glass and fixed to the Outer Frame with the
supporting section of size 29mm x 20mm of 0.58mm
thick fixed horizontally on top and bottom of the
shutter frame.
85
Sl. SS RATE FOR
No 2016-17
item of work for ii) Center Shutter Sliding: center
shutter frame made of section of size 20mm x 47mm
should be fitted with 5 mm thick plain float glass
of reputed make. The supporting guide section of size
15mm x 19mm of 0.58mm thick fixed horizontally at
top and bottom of shutter frame and slides along the
bottom and top guide tracks made of sections size
24mm x 20mm of 0.58mm thick and 29mm x 20mm
of 0.58mm thick and iii) Center Fly mesh Shutter
Sliding: Section for Fly mesh Shutter frame should be
of size 20mm x 40mm of 0.58mm thick and fitted
with SS mesh (304 Grade). The supporting guide
section of size 29mm x 20mm of 0.58mm thick at the
bottom and 15mm x 19mm of 0.58mm thick at the
top fixed horizontally to the Fly mesh frame and
slides along the bottom and top guide tracks made of
sections size 20mm x 20mm of 0.58mm and 29mm x
20mm of 0.58mm.
86
Sl. SS RATE FOR
No 2016-17
item of work for Window with 3 shutters (Center
fixed shutter / Center sliding shutter / center Fly
mesh shutter) and without Grill Window made of
Outer Frame of size 90mm x 50mm. i) Center Shutter
Fixed: center shutter frame made of section with size
20mm x 47mm of 0.58mm thick should be fitted with
5mm thick plain float glass of reputed make, EPDM
gasket all around the glass and fixed to the Outer
Frame with the supporting section of size 29mm x
20mmof 0.58mm thick fixed horizontally on top and
bottom of the shutter frame.
Outer Frame of size 90mm x 50mm. ii) Center Shutter
Sliding: center shutter frame made of section with
size 20mm x 47mm of 0.58mm thick should be fitted
with 5 mm thick plain float glass of reputed make.
The supporting guide section of size 15mm x 19mm
of 0.58mm thick fixed horizontally at top and bottom
of shutter frame and slides along the bottom and top
guide tracks made of sections size 24mm x 20mm of
87
Sl. SS RATE FOR
No 2016-17
0.58mm thick and 29mm x 20mm of 0.58mm thick.
Outer Frame of size 90mm x 50mm. iii) Center Fly
mesh Shutter Sliding: Section for Fly mesh shutter
frame should be of size 20mm x 40mm and fitted with
SS mesh (304 Grade). The supporting guide section of
size 29mm x 20mm of 0.58mm thick at the bottom
and 15mm x 19mm of 0.58mm thick at the top fixed
horizontally to the Fly mesh frame and slides along
the bottom and top guide tracks made of sections size
20mm x 20mm of 0.58mm thick and 29mm x 20mm
of 0.58mm thick.
88
Sl. SS RATE FOR
No 2016-17
534 TBSC-M.II-09 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 7,030.00
Chloride (UPVC) 2 Track2 Panel Sliding windows
PHR of CaCo3 for every 100 parts of PVC resin) of (62
mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer
frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20
mm for sliding shutter frames capable of mounting
single glazing system, structurally reinforced with hot
dip galvanized up to 50 microns of minimum
thickness of 1.0/1.2 mm prefabricated & welded
through fusion welding. The window sash shall be
fitted with 5 mm thick clear float glass of reputed
make duly fixed with Grey colour TPV Gasket for sash
& Glazing bead shall be co-extruded with Grey colour
soft PVC. System shall have single point locking with
Touch Lock and the system is to be installed at the
site using anchor fasteners, silicon rubber sealant,
easy glazing/ deglazing at site etc., including cost and
Chloride (UPVC) 3 track sliding windows with mesh
shutter provision (only 2-glass shutters) duly
manufactured using UPVC reinforced profiles
(Composition of profile shall consists a minimum of
5.5 PHR of TiO2 and not more than 12 PHR of CaCo3
for every 100 parts of PVC resin) of (80 mm x 52
mm)/ (94 mm x 45 mm) x 2.20 mm for outer frames,
(54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for
sliding shutter frames capable of mounting single
glazing system, structurally reinforced with hot dip
1.0/1.2 mm prefabricated & welded through fusion
welding. The window sash shall be fitted with 5 mm
thick clear float glass of reputed make duly fixed with
be co-extruded with Grey colour soft PVC. System
shall have single point locking with Touch Lock and
item of work
89
Sl. SS RATE FOR
No 2016-17
Chloride (UPVC) 3 track sliding windows with
mesh shutter (2-glass shutters and 1-mesh
shutter) duly manufactured using UPVC reinforced
PHR of CaCo3 for every 100 parts of PVC resin) of (94
mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer
frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20
mm for sliding shutter frames capable of mounting
single glazing system structurally reinforced with hot
dip galvanized up to 50 microns of minimum
thickness of 1.0/1.2 mm prefabricated & welded
through fusion welding. The window sash shall be
fitted with 5 mm thick clear float glass of reputed
make and mesh shutter frame shall be (42 mm x 25
mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl
Coated Fiber mesh- on rollers/ pulley duly fixed with
be co-extruded with Grey colour soft PVC. System
shall have single point locking with Touch Lock and
item of work.
537 TBSC-M.II-12 Providing and fixing COMPOSITE SLIDING WINDOW 1 Sqm 5,952.00
fabricated from roll formed sections made of
Galvanized Steel colour Coated/Powder Coated (Base
Steel as per IS 513 D quality, Galvanized as per IS
277 with Zinc of 120 grams /Sq.Mtr.) with total
coated thickness of 0.58 mm, powder coated with
pure Polyester Powder up to 50-60 microns thick and
the section for external frame bottom of 68 x 25mm
(Aluminium), External frame sides & Top of 68 x 25
mm (Aluminium), section for shutter of 59 x 23mm
and Lap Strip of 30 x 7.5mm (uPVC) cut to length and
mitre joined with L-bracket and 5 mm plain float
Glass with Ethyl Propylene Diametermine Monomer
(EPDM) gasket, the corner bracket for external frame
made of Aluminium L-Angle, Corner Bracket for
internal frame made of Polypropylene, Crescent
Latch, Rollers, & EPDM Gaskets for shutters, wool pile
for lap strip, Bump Stop Base & Rubber for shutter
stopper including fixing to brick/concrete masonry
using Nylon self-expanding caps and driving MS
electroplated 80mm long screws into the caps
through frames and fixing 10mm square guard bars
with 6 pitch centre to centre (152.4mm) and all
taxes completed for finished item of work
90
Sl. SS RATE FOR
No 2016-17
538 TBSC-M.II-13 Providing and Fixing Pre painted Steel Sliding Door 1 Sqm 7,500.00
3 Track-3 Panel Sliding Door fabricated from Roll
formed sections made of galvanized Steel colour
coated/powder coated (Base Steel as per IS 513 D
quality, galvanized as per IS 277 with zinc of 120
GM/Sq.mtr) with total coated thickness of 0.58mm.
Primer coat with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12-16 microns
thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester
powder up to 50-60 microns thick. Section for
external frame should be of 107x44mm, Section for
shutter should be of 35x67mm. The windows should
be paneled with 5mm thick plain float glass. Corner
bracket for internal and external frame made of glass
filled nylon. Gaskets are to be made of Ethyl
Propylene Diamine Monomer (EPDM).The sections
are to be cut to length, joined and assembled by
means of corner bracket. The above frames should be
fixed to the concrete/masonry walls by means of self
expanding brackets & screws including 10mm square
guard bars with 6 pitch (152.4mm) and all Taxes
III SUB-SECTION VENTILLATORS

539 TBSC-M.III-01 Supply and fixing of pre-painted steel top hung and 1 Sqm 6,924.00
fixed louvered ventilators made of pre - painted steel
as per IS 513 of -0.58 mm thick 'D quality, galvanized
as per IS 277, finish painted with a polyester paint &
4 mm pinhead glass for ventilators with EPDM Gasket
with handle made of high grade aluminium powder
coated and nylon receiver, corner brackets made of
CRCA with Zinc Phosphate, Mullion caps made of
glass filled nylon, frames fixed to the concrete
/masonry wall by means of self expanding screws
including 10 mm square guard bars with 6 pitch
complete for finished item of work for (i) Ventilators:
Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame
section size of 46mm x 52 mm shutter frame section
size of 46mm x 46 mm and (ii) Ventilators: Top Hung
4 '-0 x 2'-0 (1219.2x609.6mm) outer frame section
size of 46 x 52 m shutter frame section size of 46 x 46
mm Mullion section size of 46 x 70 mm and (iii)
Ventilators: Top Hung 4 '-0 x 3'-0 (1219.2x914.4mm)
outer frame section size of 46 x 52m m shutter frame
section size of 46 x 46 mm Mullion section size of 46 x
70 mm
91
Sl. SS RATE FOR
No 2016-17
540 TBSC-M.III-02 Supply and fixing of pre-painted steel top hung and 1 Sqm 4,737.00
fixed louvered ventilators made of pre - painted steel
as per IS 513 of -0.58 mm thick 'D quality, galvanized
as per IS 277, finish painted with a polyester paint &
4 mm pinhead glass for ventilators with EPDM Gasket
with handle made of high grade aluminium powder
coated and nylon receiver, corner brackets made of
CRCA with Zinc Phosphate, Mullion caps made of
glass filled nylon, frames fixed to the concrete
/masonry wall by means of self expanding screws
including 10 mm square guard bars with 6 pitch
complete for finished item of work for (i) Ventilators:
Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box
section) outer frame section size of 33 x 56 mm and
(ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x
609.6 mm) (Box section) outer frame section size of
33 x 56 mm Mullion section size of 33 x 56 mm and
(iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x
914.4 mm) (Box section) outer frame section size of
33 x 56 mm Mullion section size of 33 x 56 mm
541 TBSC-M.III-03 Providing and fixing of top hung Ventilators made of 1 Sqm 6,105.00
pre-painted steel as per IS 513 of 0.80 mm thick
galvanized as per IS 277 with a polyester paint with 1
No. of High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder coated /SS ball
bearing butt Hinges provided per shutter and fitted
with 4 mm thick plain float glass with rubber gaskets
including fixing the frames in concrete/masonry wall
by means of self expanding screws, Including 10 mm
Square guard bars with 6 (152.4mm) pitch etc.,
complete for finished item of work for
(i) Single open able ventilator shutter size of 2 0 x 2
0 (609.6 x 609.6mm) outer frame section size of 80
x 45mm, shutter frame section size of 52 x 25mm
thick and (ii) Double open able ventilator shutter
Size of 4 0 x 2 0 (1219.2mm x 609.6mm) outer
frame section size of 80 x 45mm,shutter frame
section size of 52 x 25mm, vertical mullion section
size of 80 x 60 mm and (iii) Double open able fix
shutter size of 40 x 30 (1219.2mm x 914.4mm)
outer frame section size of 80 x 45mm , shutter frame
section size of 52 x 25 mm ,Vertical mullion section
size of 80 x 60 mm
92
Sl. SS RATE FOR
No 2016-17
542 TBSC-M.III-04 Providing and fixing of louvered Ventilators made of 1 Sqm 4,177.00
pre-painted steel as per IS 513 of 0.80 mm thick
galvanized as per IS 277 with a polyester paint with
and fitted with 4 mm thick plain float glass including
of self expanding screws, etc., complete for finished
item of work for (i) Single fixed Louvers Ventilator
size of 2 0 x 2 0 (609.6 x 609.6mm) outer frame
box section size of 80 x 45mm and (ii) Double fixed
Louvers ventilator Size of 4 0 x 2 0 (1219.2mm x
609.6mm) outer frame box section size of 80 x 45mm,
vertical mullion section size of 80 x 60 mm and (iii)
Double fixed Louvers Ventilator size of 40 x 30
(1219.2mm x 914.4mm) outer frame box section size
of 80 x 45mm , Vertical mullion section size of 80 x 60
mm
543 TBSC-M.III-05 Providing and fixing of top hung Ventilator with fly 1 Sqm 7,551.00
mm thick galvanized as per IS 277 with Zinc, finish
painted with a polyester paint, section for fly-shutter
of 0.6 mm thick and fitted with stainless steel 32
gauge fly mesh of 304 grade and mullions to have
double rebate for glazed shutter and fly-shutter with
a provision for guard bars/grills and 1 No. of High
grade nylon latch handle, window stopper, 2 nos. of
with MS Powder coated /SS ball bearing butt Hinges
of self expanding screws, Including 10 mm Square
guard bars with 6 (152.4mm) pitch etc., complete for
finished item of work for (i) Single open able
ventilator shutter window size of 2 0 x 2 0 (609.6 x
609.6mm) outer frame section size of 100 x 45mm,
Glazed and fly mesh shutter frame section size of 52 x
25mm thick and (ii) Double open able ventilator
shutter window Size of 4 0 x 2 0 (1219.2mm x
609.6mm) outer frame section size of 100 x 45mm,
Glazed and fly mesh shutter frame section size of 52 x
25mm, vertical mullion section size of 100 x 60 mm
and (iii) Double open able fix shutter window size of
40 x 30 (1219.2mm x 914.4mm) outer frame
section size 100 x 45mm , Glazed and fly mesh shutter
frame section size 52 x 25 mm ,Vertical mullion
section size of 100 x 60 mm
93
Sl. SS RATE FOR
No 2016-17
544 TBSC-M.III-06 Providing and fixing of top hung Ventilator with fly 1 Sqm 5,088.00
mm thick galvanized as per IS 277 with Zinc, finish
painted with a polyester paint, section for fly-shutter
of 0.6 mm thick and fitted with stainless steel 32
gauge fly mesh of 304 grade and mullions to have
double rebate for glazed shutter and fly-shutter with
a provision for guard bars/grills and 1 No. of High
grade nylon latch handle, window stopper, 2 nos. of
with MS Powder coated /SS ball bearing butt Hinges
of self expanding screws, Including 10 mm Square
guard bars with 6 (152.4mm) pitch etc., complete for
finished item of work for (i) Single fixed Louvers
Ventilator window size of 2 0 x 2 0 (609.6 x
609.6mm) outer frame box section size of 100 x
45mm, fly mesh shutter frame section size 52 x 25
mm and (ii) Double fixed Louvers ventilator window
Size of 4 0 x 2 0 (1219.2mm x 609.6mm) outer
frame box section size of 100 x 45mm, fly mesh
shutter frame section size 52 x 25 mm, vertical
mullion section size of 100 x 60 mm and (iii) Double
fixed Louvers Ventilator window size of 40 x 30
(1219.2mm x 914.4mm) outer frame box section size
100 x 45mm , fly mesh shutter frame section size 52 x
25 mm Vertical mullion section size of 100 x 60 mm
545 TBSC-M.III-07 Providing, supplying & fixing of Fixed Louvered 1 Sqm 6,606.00
Ventilator made out of multi chambered uPVC
sections with Glazing bead shall be co-extruded with
Grey colour soft PVC. having isolated drainage and
reinforced with Galvanized Iron profiles throughout
the window. The outer frame having an overall size of
60 mm x 55 mm x 2.40 with reinforcement of 1 mm
thickness and Mullion with overall size of 74 mm x 60
mm x 2.40 mm with reinforcement of 1 mm
thickness. (Composition of profile shall consists a
PHR of CaCo3 for every 100 parts of PVC
resin).Ventilator shall be provided with 4.5 mm Pin
Head glass, standard hardware. Wall thickness of
frame & Mullion shall be 2.4 mm.,including cost and
94
Sl. SS RATE FOR
No 2016-17
546 TBSC-M.III-08 Providing, supplying & fixing of Top hung Ventilator 1 Sqm 9,295.00
With Exhaust Fan Provision made out of multi
chambered uPVC sections with TPV Gasket for sash &
Glazing bead shall be co-extruded with Grey colour
soft PVC and reinforced with Galvanized Iron profiles
throughout the window. The outer frame having a
overall size of 60mm x 55 mm x 2.40 mm with
reinforcement of 1 mm thickness, Mullion with
overall size of 74 mm x 60 mm x 2.40 mm with
reinforcement of 1 mm thickness and Sash with
overall size of 75 mm x 60 mm x 2.40 mm with
reinforcement of 1.0/1.2 mm thickness. (Composition
of profile shall consists a minimum of 5.5 PHR of TiO2
and not more than 12 PHR of CaCo3 for every 100
parts of PVC resin).Glazing bead for fixing of glass
shall be of size 34 x 20 mm coextruded with soft PVC
gasket. Ventilator shall be provided with 4.5 mm Pin
Head glass, standard hardware, single point locking
using cockspur handle and friction stays. Wall
thickness of frame, mullion and sash shall be 2.4
mm.,including cost and conveyance of all materials,
N SECTION STRUCTURAL GLAZING & CURTAIN WALLING

I SUB-SECTION FIXED GLAZING

547 TBSC-N.I-01 Supplying and fixing of curtain Glazing made of pre 1 Sqm 6,013.00
painted steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 Primer coated with epoxy,
finish painted with a polyester paint using the section
for outer frame of 46 x 52 mm, section for mullion of
46 x 70 mm and section for beading of 18 x 25 mm
and the glazing with 5 mm thick plain float glass fitted
with EPDM gaskets including handle made of high
grade Aluminium powder coated and nylon receiver,
corner brackets made of CRCA with zinc phosphating,
mullion caps made of Glass filled nylon including
fixing the frames in the concrete / masonry wall with
self expanding screws, etc., complete for finished
item.- Fixed Glazing 2'-0 x 2'-0 (609.6x609.6mm) and
Fixed Glazing 2'-0 x 3'-0 (609.6x914.4mm)
95
Sl. SS RATE FOR
No 2016-17
548 TBSC-N.I-02 Supplying and fixing of curtain Glazing made of pre 1 Sqm 5,102.00
painted steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 Primer coated with epoxy,
finish painted with a polyester paint using the section
for outer frame of 46 x 52 mm, section for mullion of
46 x 70 mm and section for beading of 18 x 25 mm
and the glazing with 5 mm thick plain float glass fitted
with EPDM gaskets including handle made of high
grade Aluminium powder coated and nylon receiver,
corner brackets made of CRCA with zinc phosphating,
mullion caps made of Glass filled nylon including
fixing the frames in the concrete / masonry wall with
self expanding screws, etc., complete for finished
item.- Fixed Glazing 3'-0 x 3'-0 (914.4x914.4mm) and
Fixed Glazing 3'-0 x 4'-0 (914.4x1219.2mm)
549 TBSC-N.I-03 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 3,240.00
Chloride (UPVC) Fixed Glazing - 48 series duly
manufactured using UPVC reinforced profiles of 60
mm x 48 mm x 2.25 mm for outer frames and the
mullion sections are of 60 mm x 76 mm x 2.25 mm
frames are structurally reinforced with hot dip
1.2 mm the sash shall be fitted with 5 mm thick clear
float glass of reputed make duly fixed with EPDM
weathering seal resistant including cost and
item of work
550 TBSC-N.I-04 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 3,872.00
Chloride (UPVC) Fixed Glazing - 56 series duly
mm x 56 mm x 2.25 mm for outer frames and the
mullion sections are of 60 mm x 70 mm x 2.25 mm
frames are structurally reinforced with hot dip
1.2 mm the sash shall be fitted with 5 mm thick clear
weathering seal resistant including cost and
item of work
II SUB-SECTION STRUCTURAL GLAZING
96
Sl. SS RATE FOR
No 2016-17
551 TBSC-N.II-01 Providing and fixing Structural Glazing fabricated 1 Sqm 7,288.00
from Roll formed sections made of Pre-painted Steel /
Powder coated base steel as per IS 513 of D quality,
galvanized as per IS 277 and the glass holding section
made of 304 grade stainless steel of 0.58 mm thick
galvanized steel section as stiffeners inside the colour
coated steel powder coated sections as per the design
requirement & calculations to suit wind pressures as
given in IS: 875, the primer coat with epoxy primer,
finish painted with a polyester paint or powder
coated with pure polyester powder and the vertical
section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56
mm x 0.72 mm for frame horizontal section, stiffener
section of 47 mm x 97 mm x 1 mm, cover profiles
sections of 20 mm x 58 mm x 0.58 mm, glass holding
section of 37 mm x 37 mm & 37 mm x 18 mm
including fixing 5mm thick Ocean Blue reflective
glass, brackets made of CRCA powder
coated/Electroplated to connect vertical to
horizontal, vertical to slab, to fix verticals at top &
bottom as per site requirement and EPDM gasket,
U.V. resistant silicon sealant including fixing in
concrete/masonry wall with self-expanding cap &
screws inclusive of cost and conveyance of all
materials to site, all labour charges, incidental
charges, cost of all consumables etc. and fixing
charges excluding scaffolding complete for finished
item of work.
552 TBSC-N.II-02 Providing and fixing Top Hung shutters in Structural 1 Sqm 5,891.00
Glazing fabricated from Roll formed sections made of
Pre-painted Steel / Powder coated base steel as per IS
513 of D quality, galvanized as per IS 277 and the
glass holding section made of 304 grade stainless
steel of 0.58 mm thick, duly providing stiffeners
inside the colour coated steel/powder coated
sections as per the design requirement, calculations
to suit wind pressures as given in IS 875 and primer
coat with epoxy primer and powder coated with pure
polyester powder up to 50-60 microns thick and the
outer frame of 20 mm x 58 mm x 0.58 mm, shutter
sections of 57 mm x 33 mm x 0.72 mm, stiffener
sections of 55 mm x 31 mm x 1mm, hinges 2 Nos for
each shutter and aluminium Stays 2 Nos. for each
shutter, aluminium Handle 1 no. for each shutter
including cost and conveyance of all materials to site,
all labour charges, incidental charges, cost of all
consumables etc. and fixing charges etc excluding
scaffolding complete for finished item of work
III SUB-SECTION CURTAIN WALLING
97
Sl. SS RATE FOR
No 2016-17
553 TBSC-N.III-01 Supplying and fixing of Unplasticised Poly Vinyl 1 Sqm 6,903.00
Chloride (UPVC) Curtain Walling systems duly
mm x 2.5 mm for casement shutter frames and the
mullion sections are of 60 mm x 70 mm x 2.5 mm or
60 mm x 62 mm x 2.5 mm for sliding shutter outer
frames and 77 mm x 38 mm x 2.5 mm for sliding
shutter frames structurally reinforced with hot dip
1 mm the sash shall be fitted with 5 mm thick clear
weathering seal resistant and accessories for
casement window - friction stay hinges of stainless
steel grade 304- 2 Nos., per sash, handle with mazak
alloy casting 1 No. per sash, multipoint locking
system suitably concealed 1 No., per sash provided
with raiser wedges for smooth operation for sliding
window - clipping locking system 1 No. made of
aluminium including cost and conveyance of all
materials, accessories, labour charges for
transportation, erection at site with templates for
casement sizing excluding scaffolding complete for
P SECTION FIXTURES FOR DOORS & WINDOWS

I SUB-SECTION TOWER BOLTS

554 TBSC-P.I-01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 177.00
559 TBSC-P.I-06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Each 77.00
Long
Long
Long
Long
Long
Long
Long
Long
98
Sl. SS RATE FOR
No 2016-17
567 TBSC-P.I-14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) Each 26.00
100 mm Long
150 mm Long
200 mm Long
250 mm Long
300 mm Long
II SUB-SECTION HINGES
572 TBSC-P.II-01 Brass Butt hinges (IS:205)- 75 mm Long Each 73.00
576 TBSC-P.II-05 Aluminium Butt hinges (IS:205)- 75 mm Long Each 111.00
580 TBSC-P.II-09 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 12.00
581 TBSC-P.II-10 MS-Powder Coated Butt hinges (IS:205)- 100 mm Each 23.00
Long
Long
Long
584 TBSC-P.II-13 Deluxe window stay Aluminium Each 144.00
585 TBSC-P.II-14 Brass Windows Stay Each 224.00
586 TBSC-P.II-15 GI Powder Coated Friction stay hinges of 10" Long for Each 235.00
windows
587 TBSC-P.II-16 Continuous Piano Hinges Powder coated Mild steel as 1 RM 35.00
per IS-3818 : 1992 of nominal size 25 mm (B) of
thickness 0.8 to 1.0 mm
588 TBSC-P.II-17 Box hinges for cup boards 1 Each 45.00
589 TBSC-P.II-18 GI Powder Coated Friction stay hinges of 14" Long for 1 Each 330.00
windows
III SUB-SECTION DOOR HANDLES
590 TBSC-P.III-01 Aluminium Door Handles (IS:208) 75 mm Long Each 75.00
594 TBSC-P.III-05 MS-Powder Coated Door Handles (IS:208) 125 mm Each 34.00
Long
595 TBSC-P.III-06 MS-Powder Coated Door Handles (IS:208) 150 mm Each 50.00
Long
596 TBSC-P.III-07 Brass fancy handles 150 mm Each 335.00
599 TBSC-P.III-10 Brass fancy handles 300 mm Each 1,045.00
600 TBSC-P.III-11 Brass fancy handles 450 mm Each 1,635.00
99
Sl. SS RATE FOR
No 2016-17
601 TBSC-P.III-12 Keyless lockset for toilet doors with CP or PC knob Each 348.00
handles (complete set)
602 TBSC-P.III-13 Keyless lock set for toilet doors with brass knob Each 921.00
handles
603 TBSC-P.III-14 Hard Nylon Window Handle Each 70.00
IV SUB-SECTION ALDROPS
604 TBSC-P.IV-01 Brass Aldrop (IS:2681) 300 mm long Each 1,284.00
607 TBSC-P.IV-04 Aluminium Aldrop (IS:2681) 200 mm long Each 329.00
610 TBSC-P.IV-07 MS-Powder Coated Aldrop (IS:2681) 200 mm long Each 115.00
V SUB-SECTION LATCHES
613 TBSC-P.V-01 Brass latch heavy 300 mm Each 644.00
616 TBSC-P.V-04 Aluminium Flat Latches: 200 mm long Each 159.00
619 TBSC-P.V-07 MS-Powder Coated Flat Latches: 250 mm long Each 58.00
620 TBSC-P.V-08 MS-Powder Coated Flat Latches: 300 mm long Each 73.00
VI SUB-SECTION DOOR CLOSURES
621 TBSC-P.VI-01 Providing and fixing Cast Iron Body Bottle Type Each 1,035.00
Hydraulic Door Closer (IS: 3564) with double speed
adjustment, with necessary accessories and screws
etc. complete
622 TBSC-P.VI-02 Providing and fixing Aluminium Extruded Section Each 1,198.00
Body Tubular Type Hydraulic Door Closer (IS: 3564)
with double speed adjustment with necessary
accessories and screws etc. complete (Type-1: for
width of doors up to 700 mm)
width of doors 701 to 850 mm)
width of doors 851 to 1000 mm)
VII SUB-SECTION FLOOR SPRINGS
625 TBSC-P.VII-01 Double action Stainless steel cover plate and cast Each 1,912.00
body iron floor spring (IS 6315- Table-1)
626 TBSC-P.VII-02 Double action Brass cover plate and cast brass body Each 4,536.00
floor spring (IS 6315- Table-1)
100
Sl. SS RATE FOR
No 2016-17
627 TBSC-P.VII-03 Providing and fixing double action brass cast Each 3,788.00
hydraulic floor spring (IS:6315-Table 1) for doors
including cost of cutting floors as required,
embedding in floors and S.S./ Brass cover plates with
brass pivot and single piece M.S. Sheet outer box with
slide plate etc. complete (door weight capacity up to
130 Kgs)
628 TBSC-P.VII-04 Providing and fixing double action brass cast Each 2,816.00
hydraulic floor spring (IS:6315-Table 1) for doors
including cost of cutting floors as required,
embedding in floors and S.S. cover plates with brass
pivot and single piece M.S. Sheet outer box with slide
plate etc. complete (door weight capacity up to 80
Kgs)
629 TBSC-P.VII-05 Providing of brass cast body Floor Spring IS: 6315 Each 12,513.00
sleek in size with the S.S. / Brass Cover plates of
Length 320 mm x Breadth 130 mm size along with
the Top Patch, Bottom Patch, Door Lock and Pivot
with Double Cylinder etc. complete for Heavy duty
Glass doors.
VIII SUB-SECTION MORTICE LOCKS
630 TBSC-P.VIII-01 Heavy duty mortice lock 6/7 levers (IS:2209) with PC Each 935.00
or CP handles complete set
631 TBSC-P.VIII-02 Heavy duty mortice lock 6/7 levers (IS:2209) with Each 2,405.00
brass heavy handles
IX SUB-SECTION OTHER ACCESSORIES
632 TBSC-P.IX-01 Brass Door Stoppers Each 198.00
633 TBSC-P.IX-02 MS-Powder Coated - Door Stoppers Each 50.00
634 TBSC-P.IX-03 Heavy duty Aluminium Door stopper Each 63.00
635 TBSC-P.IX-04 Rubber/ Nylon door stop bushes 1 Each 10.00
636 TBSC-P.IX-05 Supply & fixing drapery rods (25.4 mm) 1" x 21 G RM 128.00
Powder coated with PVC rings
637 TBSC-P.IX-06 Supply & fixing drapery bracket - brass powder pair 451.00
coated
638 TBSC-P.IX-07 Nylon rollers for sliding glasses/ alluminium 1 Each 15.00
windows
639 TBSC-P.IX-08 MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA 1 Each 35.00
640 TBSC-P.IX-09 Magnetic Catchers 1 Each 15.00

Q SECTION CONSTRUCTION CHEMICALS & ADMIXTURES
Approved brands, area of application, dosage etc
have been appended to this SoR for the guidance
for preparation of estimates only. However,
literature for usage/ application of construction/
water proofing materials, epoxies etc, may be
obtained from the manufacturers, while in
execution.
I SUB-SECTION PLASTICIZERS
641 TBSC-Q.I-01 Concrete Plasticizers and Water reducing admixture 1 Ltr 200.00
Conforming to IS:9103-1999
101
Sl. SS RATE FOR
No 2016-17
642 TBSC-Q.I-02 Early High Strength, High water retention, 1 Kg 140.00
polycarboxylic plasticizers Conforming to IS:9103-
1999
643 TBSC-Q.I-03 High performance super plasticizer and water 1 Kg 95.00
reducing admixture Conforming to IS: 9103-1999
644 TBSC-Q.I-04 Super plasticizer for high range water reducing 1 Kg 105.00
admixture Conforming to IS: 9103-1999
645 TBSC-Q.I-05 Super plasticizer, high range water reducing and 1 Kg 115.00
retarding admixture complying with IS: 9103-1999
646 TBSC-Q.I-06 Plasticizer for accelerator for sprayed concrete 1Kg 85.00
Conforming to IS: 9103-1999.
II SUB-SECTION WATER PROOFING COMPOUNDS
647 TBSC-Q.II-01 Integral Cement Waterproofing Liquid Conforming to 1 Ltr 210.00
IS: 2645-2003
648 TBSC-Q.II-02 High durable cementitious acrylic based 1 Kg 134.00
waterproofing systems
649 TBSC-Q.II-03 Acrylic Polymer Elastomeric Cementitious 1 Ltr 350.00
Waterproof Coatings
650 TBSC-Q.II-04 Single component, elastomeric waterproof 1 Ltr 425.00
membrane coating
651 TBSC-Q.II-05 Quick setting, rapid hardening and water proofing 1 Ltr 80.00
compound Conforming to IS: I.S. 2645-2003
652 TBSC-Q.II-06 Highly Flexible Waterproof Acrylic Elastomeric 1 Ltr 300.00
bituminous Blended Coatings
III SUB-SECTION BONDING AGENTS
653 TBSC-Q.III-01 Acrylic based Bonding adhesive 1 Ltr 150.00
654 TBSC-Q.III-02 Styrene butadiene rubber based bonding agent 1 Kg 450.00
655 TBSC-Q.III-03 Two Parts system of Epoxy Bonding adhesive 1 Kg 870.00
Conforming to ASTM-C 881
IV SUB-SECTION ANTI-CORROSIVE AGENTS
656 TBSC-Q.IV-01 Acrylic based Anti corrosive coating 1 Ltr 350.00
657 TBSC-Q.IV-02 Rust converter rust encapsulating coating for steel 1 Ltr 480.00
658 TBSC-Q.IV-03 High range of reinforcement / steel protector against 1 Kg 750.00

corrosion zinc rich epoxy resin primer
659 TBSC-Q.IV-04 Anti corrosion CRPPC (Corrosion Resistant) inhibitive 1 Lit 345.00
admixture
V SUB-SECTION GROUTS
660 TBSC-Q.V-01 High Power Polyester Resin Anchor Grout 1 Kg 300.00
Conforming to ASTM-827
661 TBSC-Q.V-02 Non-shrink Free flow high strength precision grout 1 Kg 34.00
Conforming to BS 1881 Part 1161983.
662 TBSC-Q.V-03 Low viscosity Epoxy resin injection grout 1 Kg 800.00
663 TBSC-Q.V-04 Three component epoxy grout Conforming to IS: 1 Kg 160.00
ASTM 827 (Three components)
VI SUB-SECTION MISCELLANEOUS CHEMICALS
664 TBSC-Q.VI-01 Mould / Shutter releasing oil 1 Ltr 145.00
665 TBSC-Q.VI-02 Non oxidizing, heavy duty metallic Floor Hardeners 1 Kg 37.00
666 TBSC-Q.VI-03 Non-metallic Floor Hardeners 1 Kg 30.00
102
Sl. SS RATE FOR
No 2016-17
667 TBSC-Q.VI-04 High Strength, Non shrink Micro Concrete for 1 Kg 36.00
structural repair product.
668 TBSC-Q.VI-05 Structural graded polymer modified reinstatement 1 Kg 85.00
concrete / mortar (Two Part System)
669 TBSC-Q.VI-06 Three Component high performance elastomeric 1 Kg 950.00

mortar.
670 TBSC-Q.VI-07 Surface treatment crystalline product. 1 Kg 360.00
671 TBSC-Q.VI-08 Polyurethane Sealant. 600 ml tube 1 No 730.00
672 TBSC-Q.VI-09 Polysulphide Sealant. 1 Kg 450.00
673 TBSC-Q.VI-10 Acrylic Latex caulking compound. 1 Kg 335.00
674 TBSC-Q.VI-11 Fast setting cement based plugging compound 1 Kg 85.00
675 TBSC-Q.VI-12 Highly Flexible High Range Polyurethane surface 1 Ltr 650.00
coatings
676 TBSC-Q.VI-13 Coal Tar Epoxy 1 Kg 350.00
677 TBSC-Q.VI-14 Water Based Acrylic Blended High power curing 1 Kg 100.00
compound
678 TBSC-Q.VI-15 Bituminous hot sealing compound 1 Kg 120.00
679 TBSC-Q.VI-16 Bitumen solution primer coating. 1 Kg 85.00
680 TBSC-Q.VI-17 Air Entraining Agent Conforming to IS: 9103-99 1 Ltr 120.00
681 TBSC-Q.VI-18 Chlorpyriphos/ Lindane emulsifiable concentrate of 1 Liter 228.00
20%
VII SUB-SECTION REPAIRING & TREATMENT WORKS
682 TBSC-Q.VII-01 Providing Tar Felting roof repair with approved 1 Sqm 260.00
brand Tar Felt duly applying one coat of appropriate
grade of bitumen in hot condition @ 0.2 Kg/1 Sqm of
roof area, fixing tar felt (Conforming to IS 1322-
1972 specification), applying second coat of
appropriate grade of hot bitumen at 1.20 Kg / 1 Sqm
of roof area and spreading course aggregate (sand)
at 0.063 Cum per 1 Sqm of roof area finished item.
683 TBSC-Q.VII-02 Providing waterproofing treatment by supplying 1 Sqm 360.00

and fixing synthetic membrane felt of 1.50 mm
thickness, 2.25 Kg per Sq. Mtr. duly applying one coat
of Bituminous Emulsion, first coat of bituminous
grade 85/25, fix waterproofing membrane, applying
second coat of bitumen grade 90/15 after sealing all
the joints and abutments with a Gas torch and
applying one coat of bituminous aluminum paint
for heat resistance for finished item.
684 TBSC-Q.VII-03 Providing and laying of 3mm thick app modified 1 Sqm 490.00
bitumen membrane treatment to the terrace duly
[1]removing of existing tar felt. [2]cleaning of the
surface from dirt, dust and other contaminations.
[3]application of one coat of Bitumen primer
[4]providing and laying of 3mm thick APP Modified
Bitumen Membrane with 100 mm overlap fixing
with butane torch.
103
Sl. SS RATE FOR
No 2016-17
685 TBSC-Q.VII-04 Providing specialized high performance acrylic 1 Sqm 390.00
polymer modified elastomeric cementitious
waterproof coating to the terrace / walls / internal
portion of the bathroom & toilets / internal portion
of the water tanks duly cleaning of the surface from
dirt, dust and other contaminations, providing and
application of Two coats of High performance Acrylic
polymer modified Elastomeric cementitious
waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )
686 TBSC-Q.VII-05 Providing specialized high build, elastomeric acrylic 1 Sqm 360.00
bituminous blended coating to the terrace / internal
portion of the bathroom / toilets / basements /
roofing duly a). Cleaning of the surface. b). Applying
primer coat of High Build, Elastomeric Acrylic
Bituminous Blended Coating c). Application of Two
coats of High Build, Elastomeric Acrylic Bituminous
Blended Coating
687 TBSC-Q.VII-06 Providing specialized high solid, cold applied, acrylic 1 Sqm 570.00
elastomeric liquid membrane coating treatment to
the terrace / roofing with fiber mesh / geo fabric duly
a. Cleaning of the surface from dirt, dust and other
contaminations. b. Applying one coat of High solid,
Cold applied, Acrylic Elastomeric Liquid Membrane
coating c. immediately, Application of one coat of
High solid, Cold applied, Acrylic Elastomeric Liquid
Membrane coating e. Laying of fiber mesh 40 GSM /
Geo fabric 40 GSM on the surface. f. Over the Fiber
mesh, Application of two coats of High solid, cold
applied, Acrylic Elastomeric Liquid Membrane
Coating
104
Sl. SS RATE FOR
No 2016-17
688 TBSC-Q.VII-07 Providing specialized polysulphide sealant treatment 1 RM 650.00
to the expansion joints (Size : 25mm x 12mm) duly
a]. Chipping and removing of existing covering on
expansion joints b]. Cleaning of the surface from dirt,
dust and other contaminations c].Application of one
coat of - High performance specially designed SBR
latex polymer based bonding agent d]. Providing
and application of Acrylic Polymer modified
reinstatement concrete /mortar to the damaged
edges of joint and making the groove. e]. Providing
and fixing of masking tape on top of the joint both
sides f]. Providing and fixing of Back up support
material of Backer rod to leave the depth of 12mm on
the joint g]. Providing and application of one coat of
polysulphide primer on inner edges of Joint. h].
Providing and application of Two part Polysulphide
sealant to a width of 25mm and 12mm depth with
putty knife and neat finish i]. Removing of masking
tape and providing and application of two coats of
Acrylic elastomeric cementitious coating
689 TBSC-Q.VII-08 Pressure grouting the drilled holes with neat cement 1 Each 50.00
slurry or with approved grout admixture using pump
- excluding cost of drilling holes
VIII SUB-SECTION EXPANSION JOINTS
690 TBSC-Q.VIII-01 Supply of high performance expansion joint filler 1 Sqm 804.00
board conforming to IS: 1838 - 18 mm THICK
691 TBSC-Q.VIII-02 Supply of high performance expansion joint filler 1 Sqm 902.00
692 TBSC-Q.VIII-03 Supply of high performance expansion joint filler 1 Sqm 1,127.00
693 TBSC-Q.VIII-04 Supply of expansion joint filler board conforming to 1 Sqm 322.00
IS: 1838 for buildings, columns, beams and slabs 20
mm THICK
mm THICK
mm THICK
696 TBSC-Q.VIII-07 Supply of back up to cold applied gun-grade 1 RM 13.00
polysulphide sealant conforming to IS:11433 (Part-1)
in construction and longitudinal joint - 10 mm OD

105
Sl. SS RATE FOR
No 2016-17


R SECTION MISCELLANEOUS ITEMS

701 TBSC-R.I-01 Supply of White Cement conforming to IS:8042-1989 1 Kg 31.00
702 TBSC-R.I-02 Supply of well burnt cinder aggregates as per IS: 1 Cum 670.00
2686-1977
703 TBSC-R.I-03 Supply of Aluminium anodized Sections for Doors, 1 Kg 321.00
partitions, windows, Ventilators (including
annodization cost) conforming to IS: 11857 - 1986
704 TBSC-R.I-04 Providing Powder coating as per IS:13871-1993 or 1 Kg 32.00
colour annodization as per IS:7088-1973 - on any
aluminium or mild steel section
705 TBSC-R.I-05 Providing hot dip galvanizing to any steel section as 1 Kg 20.00
per IS:2629-1985
706 TBSC-R.I-06 Supply of Clear Silicone Sealant (Glass Glue Sealant) 1 Kg 233.00
of Gun Applicator grade
707 TBSC-R.I-07 Supply of Sun Control film to the glazed windows 1 Sqm 329.00
partition including labour charges.
708 TBSC-R.I-08 Supply of Aluminium Venetian Blinds horizontal 25.4 1 Sqm 838.00
mm wide with all accessories.
709 TBSC-R.I-09 Supply of Aluminium Venetian Blinds horizontal 20.0 1 Sqm 798.00
mm wide with all accessories.
710 TBSC-R.I-10 Supply of Venetian blinds Vertical blinds 100 mm 1 Sqm 1,355.00
wide with all accessories.
711 TBSC-R.I-11 Supply of Rubber Beading for glass fixing 1 RM 2.00
712 TBSC-R.I-12 Supply of Soft Brush for painting, varnishing etc Each 148.00
713 TBSC-R.I-13 Supply of Wire Brush for scraping Each 33.00
714 TBSC-R.I-14 Providing and fixing PVC door cladding to the flush 1 Sqm 388.00
doors shutters, for the new doors it shall be pasted
with synthetic glue or nailed to the old doors.
complete as per direction of Engineer in charge,
manufacturers specification and drawing - 1 mm
thick
with Synthetic glue SSR 998 or nailed to the old
doors. complete as per direction of Engineer in
charge, manufacturers specification and drawing - 1.5
mm thick
106
Sl. SS RATE FOR
No 2016-17
with Synthetic glue SSR 998 or nailed to the old
doors. complete as per direction of Engineer in
charge, manufacturers specification and drawing - 2.0
mm thick
717 TBSC-R.I-17 Supplying and fixing aluminium composite cladding 1 Sqm 2,586.00
with skin material 0.25 mm thick aluminium sheet
cover material natural polyethylene aluminium
cladding panel fixed with extruded aluminium basis
frame (50x25x1.5mm) angle cleats, weather sealants,
rivets, GI brackets all as approved, using suitable
bolts on structural steel work including necessary
accessories complete in all respects including labour
charges etc., complete for finished item of work but
excluding cost of structural steel fabrication,
scaffolding charges, if any, ACP Cladding - 3 mm
thick
accessories complete in all respects including all
labour charges etc., complete for finished item of
work but excluding cost of structural steel
fabrication, scaffolding charges, if any, ACP Cladding -
4 mm thick
accessories complete in all respects including all
labour charges etc., complete for finished item of
work but excluding cost of structural steel
fabrication, scaffolding charges, if any, ACP Cladding -
4 mm thick
720 TBSC-R.I-20 S&F of pre-cast RCC Grills of any design of 25 mm 1 Sqm 378.00
thick manufactured with M-30 grade of concrete
using vibro-compaction process using joint less FRP
moulds to achieve shuttering finish and adequately
reinforced for long use and to prevent damage during
handling, transportation & erection etc.,
107
Sl. SS RATE FOR
No 2016-17
723 TBSC-R.I-23 Supply of Aluminium sheet 24 Gauge 1 Sqm 302.00

724 TBSC-R.I-24 Supply of 7.5mm thick Aluminium Grill (as approved 1 Sqm 1,112.00
by the department) 3.58 Kg/1 Sqm
725 TBSC-R.I-25 Design, fabrication & supply of light weight pre
engineered buildings for a maximum span of 9 meters
with 50 x 50 x 2.8 mm M.S hollow square tubes for
columns, trusses & purlins walls with sandwich
panels made up of 2 Nos 10mm thick cement bonded
particle/ fibre boards with 25mm thick 12 kg/cum
density expanded polystyrene in between encased in
1.25 mm thick 24x7x26 mm W tracks in bottom &
top and H section for sides with doors, windows &
ventilators, roofing with 26 gauge pre painted
profiled sheets fixed with self tapping/ drilling
screws, painting with enamel paint for steel items,
OBD for interiors and ace for exteriors & providing
base plates, templates & anchor bolts along with civil
foundation designs & drawings for the finished item
of work
726 TBSC-R.I-26 Steel Structure: - Structure is made up of 50x50x2.8 1 RM 415.00

m/33x66x2.8mm thick hollow M.S. sections for
Trusses, columns, and purlins. - Columns
727 TBSC-R.I-27 Sandwich panels: Sandwich panels of 50 mm thick 1 Sqm 1,501.00
with 25 mm thermocol of 12 kg / cum, fixed in
between 2 Nos 10 mm cement bonded wood particle
/ fibre boards properly fixed together with 30
mmx30mmx30mm wood pieces along width & length
wherever necessary
728 TBSC-R.I-28 U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are 1 RM 162.00
made of 1.25 mm thick 120 GSM G.I. Sheet of size
24x51x26 mm size.
729 TBSC-R.I-29 Fabricated 'H' sections are made up of 2 Nos 1.25 mm 1 RM 236.00
thick C.R. Of 40 mm width for flanges and 1 Nos of 2
mm thick C.R. of 50 mm width plate for web. will be
used
108
Sl. SS RATE FOR
No 2016-17
730 TBSC-R.I-30 Sandwich Panel joinery is made up of couplers or 1RM 253.00
equivalent made from 0.6 mm G.I. roll formed section
to hold 2 Nos of 10 mm board on both sides with 25
mm thermocol in between.
731 TBSC-R.I-31 Window:- windows are made up of 51 x51 mm step 1 Sqm 4,591.00
'U' section made from 1.25 thick MS Cold rolled Steel
Sheet and Windows Shutters & Grill are made of
48x25mm mm size pre painted section with 4 mm
glass complete with necessary hardware. Grills are
made from 8 mm square rod at 100 mm spacing.
732 TBSC-R.I-32 Door Frames :-51 X 51 Stepped ' U' section made from 1 Sqm 4,394.00
1.25 mm thick C.R. section with a 32 mm rebate for
30 mm flush door and Door Shutters with 30 mm
thick block board / flush doors with boiling water
proof plywood complete with necessary Hard ware.
733 TBSC-R.I-33 Ventilators:- Ventilators are made of 51x51 mm step 1 Sqm 4,917.00
'U' section made From 1.25 mm thick C.R. sheet with
fixed louvers and glass.
734 TBSC-R.I-34 Painting:-1) Steel structure is to be painted with 2 1 Sqm 124.00
coats of Grade I enamel paint.
735 TBSC-R.I-35 2) Exterior walls are painted with one coast of primer 1 Sqm 111.00
and 2 coats of exterior emulsion paint .
736 TBSC-R.I-36 3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm 97.00
737 TBSC-R.I-37 Toilets: - Toilets are provided as per plan with a Each 1,050.00
provision for fixing the wash basin, W.C. etc only is
made with M.S. steel section secured to the walls with
toilet bracket provision excluding cost of WC/ Wash
basin etc
738 TBSC-R.I-38 Sun shades: - Sun shades will be provided wherever Each 3,541.00
necessary with 300 mm more than the width of
window. 25x25 mm angle frame to cover 450 mm in
the front and the sides. 10mm cement bonded
particle board will be fixed on the frame work and
sealed with green paste or equivalent.
739 TBSC-R.I-39 Roofing: - Roofing will be provided with 0.5mm thick 1 Sqm 799.00
galvanized / pre painted G.I. profiled sheets fixed to
the purlins with 14 size self drilling screws with
neoprene washer. Side laps are stitched with self
tapping / drilling screws. End laps are to be sealed
with 25x3 mm Butyl tape. The sheets are provided
with anti capillary grove.
740 TBSC-R.I-40 Preparing gabions with jungle wood Each 3.00
741 TBSC-R.I-41 Planting plants Each 2.00
742 TBSC-R.I-42 Pruning plants Each 2.00
743 TBSC-R.I-43 Maintaining avenues including fencing, weeding, Each 6.00
mulching, watering etc per plant.
109
Sl. SS RATE FOR
No 2016-17
744 TBSC-R.I-44 Maintaining avenues including fencing, weeding, Each 7.00
mulching, watering etc per plant When scattered in
hot weather with extra conveyance from March to
June
745 TBSC-R.I-45 Hoisting or lowering of slab 1 cum 105.00
746 TBSC-R.I-46 Drilling holes in hard rock surfaces up to 18mm 1 RM 247.00
Diameter
747 TBSC-R.I-47 Drilling holes in hard rock above 18mm Diameter 1 RM 344.00
748 TBSC-R.I-48 Making holes up to 18mm Diameter in RCC/ any 1 Each 41.00
stones up to 50 mm thick
749 TBSC-R.I-49 Making holes above 18mm Diameter in RCC/ any 1 Each 57.00
stones above 50 mm thick
750 TBSC-R.I-50 Supplying EPDM Gasket for windows panes to the 1 RM 35.00
PPS shutter
751 TBSC-R.I-51 Supplying SS 304 Grade Heavy Duty Pivot Hinges for 1 Each 85.00
windows
S SECTION MACHINERY & OTHER HIRE CHARGES
752 TBSC-S.I-01 Machine charges of rubbing/ polishing floor 1 Hr 268.00
753 TBSC-S.I-02 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 125.00
754 TBSC-S.I-03 Power Drill - Hand Operated - Hire Charges 1 Hr 116.00
755 TBSC-S.I-04 Grinding Mortar (Special Grinding) 1 Hr 134.00
756 TBSC-S.I-05 Casuarinas Balli Props - 3" to 4" Diameter - 12'-0" Each 73.00
Height
757 TBSC-S.I-06 Casuarinas Balli Props - 4" to 8" Diameter - 20'-0" Each 121.00
Height
758 TBSC-S.I-07 Wall Plate Brackets / beam bottom supports Each 212.00
759 TBSC-S.I-08 Wedge Plate fixture Each 10.00
760 TBSC-S.I-09 Runner beams of approximately 4" x 4" size RM 425.00
761 TBSC-S.I-10 Steel Plates for form works 1 Sqm 1,609.00
762 TBSC-S.I-11 Scaffolding Pipes & Centering accessories 1 Kg 121.00
763 TBSC-S.I-12 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" Each 130.00
long
764 TBSC-S.I-13 Hire charges for stationary Concrete pump 1 Hr 342.00
conforming to IS 21573 Part-1: 2006 to deliver the
fresh green concrete
765 TBSC-S.I-14 Concrete delivery pipes conforming to IS 15947 Part 1 Hr 4.00
I: 2012 to be connected to the pump to delivery point
(150 mm Diameter) hire charges per 10 RM
T SECTION LABOUR CHARGES

766 TBSC-T.I-01 Bailing out water for earth work excavation /concrete 1 cum 240.00
for foundation below water level. (For building items
only) - Other than sandy soil - 0.0 M to 1.0 M
110
Sl. SS RATE FOR
No 2016-17
769 TBSC-T.I-04 Bailing out water for earth work excavation / for 1 cum 381.00
concrete foundation below water level. (For building
items only) Sandy soil - 0.0 M to 1.0 M
770 TBSC-T.I-05 Bailing out water for earth work excavation /for 1 cum 592.00
concrete foundation below water level. (For building
items only) Sandy soil - 1.0 M to 2.0 M
only) Sandy soil - 2.0 M to 3.0 M
772 TBSC-T.I-07 Labour charges for making, fabricating office racks, 1 Sqm 600.00
cup-board shutters etc with ply-wood/ MDF sheets,
decolam/ veneer laminations including fixing cutting,
making, assembling, fixing hinges, fixing fixtures,
fixing locks, pasting sheets/ laminations fixing in
position with necessary screws excluding cost of
materials, accessories, fittings
773 TBSC-T.I-08 Labour charges for making, fabricating kitchen 1 Sqm 917.00
furniture, cup-boards with shutters, box cup-boards,
box racks, work-station furniture etc with ply-wood/
MDF sheets, decolam/ veneer laminations including
fixing cutting, making, assembling, fixing hinges,
fixing fixtures, fixing locks, pasting sheets/
laminations fixing in position with necessary screws
excluding cost of materials, accessories, fittings
774 TBSC-T.I-09 Labour charges for making, fabricating any 1 Sqm 467.00
aluminium door/ window/ glazing including fixing
cutting, making, assembling, fixing hinges, fixing
fixtures, fixing locks, fixing in position with necessary
screws excluding cost of materials, accessories,
fittings excluding cost of annodization
775 TBSC-T.I-10 Rounding the edges of Kadapa / Shahabad stone slabs 1 Rm 104.00
of any thickness including polishing the same
776 TBSC-T.I-11 Half Rounding the edges of Marble/ Granite stone 1 Rm 315.00
slabs of all thicknesses including polishing the same.
777 TBSC-T.I-12 Full Rounding the edges of Marble/ Granite stone 1 Rm 408.00
slabs of all thicknesses including polishing the same.
778 TBSC-T.I-13 Machine Cutting charges - for Marble/ Granite slabs 1 RM 16.00
up to 50 mm thick by mechanical device.
779 TBSC-T.I-14 Flat nosing to Kadapa/ Shahabad stone slabs of any 1 Rm 49.00
thick
780 TBSC-T.I-15 Grooves 2-3 mm 1 Rm 55.00
111
Sl. SS RATE FOR
No 2016-17
781 TBSC-T.I-16 Labour charges for fabricating steel works like 1 Kg 26.00
Window Grills, Compound Wall Grills, Iron Doors,
Windows including cost of welding rods, power
charges, excluding cost of fixing in position
782 TBSC-T.I-17 Labour charges for fixing Iron Doors, Iron Windows 1 Kg 4.00
and Window Grills in position
783 TBSC-T.I-18 Labour charges for fabricating all structural steel 1 Kg 23.00
works like heavy steel works like Trusses, Stanchions,
Heavy Beams and Girders including cost of welding
rods, power charges, etc excluding cost of fixing in
position
784 TBSC-T.I-19 Labour charges for erecting & fixing all structural 1 Kg 21.00
steel works like heavy iron grills, Trusses, Stanchions,
Heavy Beams and Girders erecting in position and
fixing by using chain pulley blocks, Derek pole
arrangements and cranes etc., complete in position
785 TBSC-T.I-20 Labour charges for Fabrication of stainless steel 1 Kg 130.00

railing works using stainless steel welding rods
including buffing, polishing, lacquer finishing, to
present seamless finish
786 TBSC-T.I-21 Labour charges for Fabrication of stainless steel sheet 1 Sqm 1,742.00
cladding works using stainless steel welding rods
including buffing, polishing, lacquer finishing, to
present seamless finish
787 TBSC-T.I-22 Labour charges for Glass designing works on any 1 Sqm 948.00
thickness of Glass including fixing at site - Etching
works
788 TBSC-T.I-23 Labour charges for Glass designing works on any 1 Sqm 1,172.00
thickness of Glass including fixing at site - Reverse
Etching work
789 TBSC-T.I-24 Labour charges for Glass designing works on any 1 Sqm 1,465.00
thickness of Glass including fixing at site - Acid wash
works
790 TBSC-T.I-25 Labour charges for fixing Flush door shutters of any 1 Sqm 380.00
thickness to the existing door frame including fixing
the fixtures to the door shutter excluding cost of
shutter
791 TBSC-T.I-26 Labour charges for fixing glass panes of any thickness 1 Sqm 284.00
to the existing door / window panes including fixing
the beading excluding cost of beading
792 TBSC-T.I-27 Labour charges for wrought and put up including 1 Sqm 1633.00
fixing in position for Teak wood Fully panelled doors
external or internal including frame
fixing in position for Teak wood Glazed and panelled
doors including fixing glass including frame
112
Sl. SS RATE FOR
No 2016-17
fixing in position for Teak wood Framed and planked
doors including frame
fixing in position for Teak wood Ledged, braced and
planked doors including frame
fixing in position for Teak wood Flush type door
shutter including frame
fixing in position for Teak wood Windows glazed
including outer frame and shutter frame
fixing in position for Teak wood Windows panelled
including outer frame and shutter frame
fixing in position for Teak wood Windows ledged,
braced and planked including outer frame
fixing in position for Teak wood Windows framed
and planked including outer frame and shutter frame
fixing in position for Teak wood Ventilators glazed,
fixed with double frame with wire netting including
frame
fixing in position for Teak wood Swing ventilators
glazed including outer frame and shutter frame
fixing in position for Teak wood Weld mesh doors
and windows including outer frame and shutter
frame
fixing in position for Teak wood G.I or .AC sheet door
& windows including outer frame and shutter frame
fixing in position for Other than teakwood Fully
panelled doors external or internal including frame
fixing in position for Other than teakwood Glazed
and panelled doors including fixing glass including
frame
fixing in position for Other than teakwood Framed
and planked doors including frame
fixing in position for Other than teakwood Ledged,
braced and planked doors including frame
113
Sl. SS RATE FOR
No 2016-17
fixing in position for Other than teakwood Flush type
door shutter including frame
fixing in position for Other than teakwood Windows
glazed including outer frame and shutter frame
panelled including outer frame and shutter frame
ledged, braced and planked including outer frame
framed and planked including outer frame and
shutter frame
fixing in position for Other than teakwood
Ventilators glazed, fixed with double frame with wire
netting including frame
fixing in position for Other than teakwood Swing
ventilators glazed including outer frame and shutter
frame
fixing in position for Other than teakwood Weld
mesh doors and windows including outer frame and
shutter frame
fixing in position for Other than teakwood G.I or .AC
sheet door & windows including outer frame and
shutter frame
818 TBSC-T.I-53 Dressing faces of granite stone (double line dressing) 1 Sqm 174.00
819 TBSC-T.I-54 Dressing faces of other than granite stone(double line 1 Sqm 108.00
dressing)
820 TBSC-T.I-55 Labour charges for removing and refixing with 1 Sqm 370.00
complete servicing of the MS Windows
U SECTION DISMANTLING
821 TBSC-U.I-01 Stone masonry in cement mortar 1 Cum 394.00
822 TBSC-U.I-02 Terracing work in roofs or floors 1 Sqm 16.00
823 TBSC-U.I-03 Flat stones in roof or floors including lifting 1Sqm 14.00
824 TBSC-U.I-04 Pan tiled or Mangalore tiled roof without roof 1Sqm 12.00
timbers.
825 TBSC-U.I-05 Flat and pan tiles or Mangalore tiles over flat tiles 1Sqm 14.00
without roof timbers
826 TBSC-U.I-06 Wrought and framed timber in roofs or floors 1 Cum 205.00
827 TBSC-U.I-07 Old lime mortar plaster 1Sqm 4.00
114
Sl. SS RATE FOR
No 2016-17
828 TBSC-U.I-08 Old cement mortar plaster 1Sqm 5.00
829 TBSC-U.I-09 Dry rough stone revetment for aprons and stacking 1 Cum 65.00
within 40 M lead
830 TBSC-U.I-10 Revetment for aprons and stacking grouted within 40 1 Cum 48.00
lead
831 TBSC-U.I-11 Kadapa slabs or Shahabad stone slabs flooring on 1Sqm 7.00
sand bed
832 TBSC-U.I-12 Through scraping of old plastered surface 1Sqm 4.00
833 TBSC-U.I-13 Washing of plastered surface with soap, soda and 1Sqm 1.00
water (or with soda lime and water)
834 TBSC-U.I-14 Clean removal of lime plaster from walls and raking 1Sqm 4.00
out joints 20 mm deep or from terraced roof and
raking out joints up to 50 mm deep
835 TBSC-U.I-15 Clean removal of cement plaster from walls and 1Sqm 5.00
raking out joints 20 mm deep or from terraced roof
and raking out joints from 50 mm to 100 mm deep
1 All the items to be used on the works are of first quality & ISI and as approved by
the Engineer-In-charge of the work.
2 Supply Rates for all the materials are based on market rates plus Sales Tax/
Material VAT.
3 Works Contract VAT for General/ Composition Scheme on finished items may be
allowed in the estimates as applicable.
4 SSR Rates for Building items are purely for the guidance of the officers in
preparation of estimates vide para.113 of APPWD code. Authority who prepares
the estimate is however responsible for proper rates as envisaged in para.45 of
APPWD code.
LEGEND "TBSC" -A.I-01

"TBSC" -R.I-22
"TBSC" -S.III-14
TBS - Denotes Telangana Buildings SoR
A.I/ R.IV - Denotes the Section & Sub-section
01/22 - Denotes the serial number of the item
115
Centring
NAME OF THE STRUCTURAL Material Hire Labour Unit of
Sl Charges for
MEMBER charges charges Measurement
2016-17
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING
A FOOTINGS Rs. 277.00 Rs. 532.00 Rs. 809.00 per 1 cum

B BED BLOCKS, BANDS Rs. 61.00 Rs. 274.00 Rs. 335.00 per 1 cum
C PEDESTALS Rs. 315.00 Rs. 845.00 Rs. 1160.00 per 1 cum
D PLINTH BEAMS Rs. 1335.00 Rs. 1281.00 Rs. 2616.00 per 1 cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,
E LINTELS Rs. 1133.00 Rs. 1360.00 Rs. 2493.00 per 1 cum

F CHAJJAS - SUNSHADES Rs. 224.00 Rs. 209.00 Rs. 433.00 per 1 sqm
G COLUMNS Rs. 341.00 Rs. 1909.00 Rs. 2250.00 per 1 cum
H BEAMS Rs. 2002.00 Rs. 1601.00 Rs. 3603.00 per 1 cum
I SLABS - Up to 150 mm thick Rs. 227.00 Rs. 182.00 Rs. 409.00 per 1 sqm
J SLABS - above 150 mm - Up to 300 Rs. 233.00 Rs. 187.00 Rs. 420.00 per 1 sqm
mm thick
K SLABS - above 300 mm thick Rs. 244.00 Rs. 195.00 Rs. 439.00 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Rs. 824.00 Rs. 659.00 Rs. 1483.00 per 1 sqm
Beams with Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 578.00 Rs. 462.00 Rs. 1040.00 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 2276.00 Rs. 1820.00 Rs. 4096.00 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 2308.00 Rs. 1846.00 Rs. 4154.00 per 1 cum
P DOME SLABS Rs. 3681.00 Rs. 2944.00 Rs. 6625.00 per 1 cum
Q HELICAL STAIRCASES Rs. 280.00 Rs. 224.00 Rs. 504.00 per 1 sqm
R SHEAR WALLS, RCC WALLS, Rs. 1160.00 Rs. 1390.00 Rs. 2550.00 per 1 sqm
WATER TANK WALLS
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,
E LINTELS Rs. 760.00 Rs. 1062.00 Rs. 1822.00 per 1 cum
F CHAJJAS - SUNSHADES Rs. 150.00 Rs. 163.00 Rs. 313.00 per 1 sqm
G COLUMNS Rs. 229.00 Rs. 1491.00 Rs. 1720.00 per 1 cum
H BEAMS Rs. 1342.00 Rs. 1251.00 Rs. 2593.00 per 1 cum
I SLABS - Up to 150 mm thick Rs. 152.00 Rs. 142.00 Rs. 294.00 per 1 sqm
J SLABS - above 150 mm - Up to 300 Rs. 156.00 Rs. 146.00 Rs. 302.00 per 1 sqm
mm thick
K SLABS - above 300 mm thick Rs. 164.00 Rs. 152.00 Rs. 316.00 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Rs. 553.00 Rs. 515.00 Rs. 1068.00 per 1 sqm
Beams with Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 387.00 Rs. 361.00 Rs. 748.00 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 1526.00 Rs. 1422.00 Rs. 2948.00 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 1547.00 Rs. 1442.00 Rs. 2989.00 per 1 cum
P DOME SLABS Rs. 2467.00 Rs. 2299.00 Rs. 4766.00 per 1 cum
Q HELICAL STAIRCASES Rs. 188.00 Rs. 175.00 Rs. 363.00 per 1 sqm
R SHEAR WALLS, RCC WALLS, DELETED
WATER TANK WALLS
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for
unsupported heights of every 610 mm height above 3.66 M may be allowed at 16.666% more than the
basic material hire charges and relevant labour charges of the applicable floor and item
116
Centring
NAME OF THE STRUCTURAL Material Hire Labour Unit of
Sl Charges for
MEMBER charges charges Measurement
2016-17
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casuarinas Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area)
A 1st - Floor Rs. 9.93 Rs. 67.94 Rs. 77.87 per 1 sqm
B 2nd - Floor Rs. 9.93 Rs. 96.94 Rs. 106.87 per 1 sqm
C 3rd - Floor Rs. 9.93 Rs. 125.95 Rs. 135.87 per 1 sqm
D 4th - Floor Rs. 9.93 Rs. 154.95 Rs. 164.88 per 1 sqm
E 5th - Floor Rs. 9.93 Rs. 183.96 Rs. 193.88 per 1 sqm
F 6th - Floor Rs. 9.93 Rs. 212.96 Rs. 222.89 per 1 sqm
G 7th - Floor Rs. 9.93 Rs. 241.97 Rs. 251.89 per 1 sqm
H 8th - Floor Rs. 9.93 Rs. 270.97 Rs. 280.90 per 1 sqm
I 9th - Floor Rs. 9.93 Rs. 299.97 Rs. 309.90 per 1 sqm
J 10th - Floor Rs. 9.93 Rs. 328.98 Rs. 338.91 per 1 sqm
K 11th - Floor Rs. 9.93 Rs. 357.98 Rs. 367.91 per 1 sqm
L 12th - Floor Rs. 9.93 Rs. 386.99 Rs. 396.92 per 1 sqm
M 13th - Floor Rs. 9.93 Rs. 415.99 Rs. 425.92 per 1 sqm
N 14th - Floor Rs. 9.93 Rs. 445.00 Rs. 454.93 per 1 sqm
O 15th - Floor Rs. 9.93 Rs. 474.00 Rs. 483.93 per 1 sqm
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casuarinas Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc., for PLASTERING to WALLS - 1 sqm
HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casuarinas Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm
117
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centring Plates, etc., for unsupported height 3.66 M
WAFFLE SHEAR
SLABS -
- (GRID) ARCH WALLS,
SLABS - above SLABS - PERGOLA ARCH
SLABS BEAMS - RCC
CHAJJAS - Up to 150 mm above SLABS BEAMS - DOME HELICAL
FLOOR LINTELS COLUMNS BEAMS (Rib above WALLS,
SUNSHADES 150 mm - Up to 300 mm (Only Rib up to 1.5 SLABS STAIRCASES
Beams 1.5 M WATER
thick 300 mm thick Beams) M Span
with Span TANK
thick
Slabs) WALLS
Material Hire for any Floor H 1133.00 224.00 341.00 2002.00 227.00 233.00 244.00 824.00 578.00 2276.00 2308.00 3681.00 280.00 1160.00
Labour Charges for 1st Floor L 1360.00 209.00 1909.00 1601.00 182.00 187.00 195.00 659.00 462.00 1820.00 1846.00 2944.00 224.00 1390.00
Total Hire Charges (H+L) T 2493.00 433.00 2250.00 3603.00 409.00 420.00 439.00 1483.00 1040.00 4096.00 4154.00 6625.00 504.00 2550.00
1st - Floor L 1360.00 209.00 1909.00 1601.00 182.00 187.00 195.00 659.00 462.00 1820.00 1846.00 2944.00 224.00 1390.00
2nd - Floor L 1496.00 230.00 2100.00 1761.00 200.00 206.00 215.00 725.00 508.00 2002.00 2031.00 3238.00 246.00 1529.00
3rd - Floor L 1632.00 251.00 2291.00 1921.00 218.00 224.00 234.00 791.00 554.00 2184.00 2215.00 3533.00 269.00 1668.00
4th - Floor L 1768.00 272.00 2482.00 2081.00 237.00 243.00 254.00 857.00 601.00 2366.00 2400.00 3827.00 291.00 1807.00
5th - Floor L 1904.00 293.00 2673.00 2241.00 255.00 262.00 273.00 923.00 647.00 2548.00 2584.00 4122.00 314.00 1946.00
6th - Floor L 2040.00 314.00 2864.00 2402.00 273.00 281.00 293.00 989.00 693.00 2730.00 2769.00 4416.00 336.00 2085.00
7th - Floor L 2176.00 334.00 3054.00 2562.00 291.00 299.00 312.00 1054.00 739.00 2912.00 2954.00 4710.00 358.00 2224.00
8th - Floor L 2312.00 355.00 3245.00 2722.00 309.00 318.00 332.00 1120.00 785.00 3094.00 3138.00 5005.00 381.00 2363.00
9th - Floor L 2448.00 376.00 3436.00 2882.00 328.00 337.00 351.00 1186.00 832.00 3276.00 3323.00 5299.00 403.00 2502.00
10th - Floor L 2584.00 397.00 3627.00 3042.00 346.00 355.00 371.00 1252.00 878.00 3458.00 3507.00 5594.00 426.00 2641.00
11th - Floor L 2720.00 418.00 3818.00 3202.00 364.00 374.00 390.00 1318.00 924.00 3640.00 3692.00 5888.00 448.00 2780.00
12th - Floor L 2856.00 439.00 4009.00 3362.00 382.00 393.00 410.00 1384.00 970.00 3822.00 3877.00 6182.00 470.00 2919.00
13th - Floor L 2992.00 460.00 4200.00 3522.00 400.00 411.00 429.00 1450.00 1016.00 4004.00 4061.00 6477.00 493.00 3058.00
14th - Floor L 3128.00 481.00 4391.00 3682.00 419.00 430.00 449.00 1516.00 1063.00 4186.00 4246.00 6771.00 515.00 3197.00
15th - Floor L 3264.00 502.00 4582.00 3842.00 437.00 449.00 468.00 1582.00 1109.00 4368.00 4430.00 7066.00 538.00 3336.00
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height or part
thereof over and above 3.66 M may be allowed at 16.666% more than the basic material hire charges and relevant labour charges of the applicable floor and item
118
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel
Centring Plates etc., for unsupported height 3.66 M
SLABS
WAFFLE
- above
SLABS SLABS - (GRID) ARCH ARCH
150 PERGOLA
- Up to - above SLABS BEAMS BEAMS
CHAJJAS - mm - SLABS DOME HELICAL
FLOOR LINTELS COLUMNS BEAMS 150 300 (Rib - up to - above
SUNSHADES Up to (Only Rib SLABS STAIRCASES
mm mm Beams 1.5 M 1.5 M
300 Beams)
thick thick with Span Span
mm
Slabs)
thick
Material Hire for any Floor H 760.00 150.00 229.00 1342.00 152.00 156.00 164.00 553.00 387.00 1526.00 1547.00 2467.00 188.00
Labour Charges for 1st Floor L 1062.00 163.00 1491.00 1251.00 142.00 146.00 152.00 515.00 361.00 1422.00 1442.00 2299.00 175.00
Total Hire Charges (H+L) T 1822.00 313.00 1720.00 2593.00 294.00 302.00 316.00 1068.00 748.00 2948.00 2989.00 4766.00 363.00
1st - Floor L 1062.00 163.00 1491.00 1251.00 142.00 146.00 152.00 515.00 361.00 1422.00 1442.00 2299.00 175.00
2nd - Floor L 1168.00 179.00 1640.00 1376.00 156.00 161.00 167.00 567.00 397.00 1564.00 1586.00 2529.00 193.00
3rd - Floor L 1274.00 196.00 1789.00 1501.00 170.00 175.00 182.00 618.00 433.00 1706.00 1730.00 2759.00 210.00
4th - Floor L 1381.00 212.00 1938.00 1626.00 185.00 190.00 198.00 670.00 469.00 1849.00 1875.00 2989.00 228.00
5th - Floor L 1487.00 228.00 2087.00 1751.00 199.00 204.00 213.00 721.00 505.00 1991.00 2019.00 3219.00 245.00
6th - Floor L 1593.00 245.00 2237.00 1877.00 213.00 219.00 228.00 773.00 542.00 2133.00 2163.00 3449.00 263.00
7th - Floor L 1699.00 261.00 2386.00 2002.00 227.00 234.00 243.00 824.00 578.00 2275.00 2307.00 3678.00 280.00
8th - Floor L 1805.00 277.00 2535.00 2127.00 241.00 248.00 258.00 876.00 614.00 2417.00 2451.00 3908.00 298.00
9th - Floor L 1912.00 293.00 2684.00 2252.00 256.00 263.00 274.00 927.00 650.00 2560.00 2596.00 4138.00 315.00
10th - Floor L 2018.00 310.00 2833.00 2377.00 270.00 277.00 289.00 979.00 686.00 2702.00 2740.00 4368.00 333.00
11th - Floor L 2124.00 326.00 2982.00 2502.00 284.00 292.00 304.00 1030.00 722.00 2844.00 2884.00 4598.00 350.00
12th - Floor L 2230.00 342.00 3131.00 2627.00 298.00 307.00 319.00 1082.00 758.00 2986.00 3028.00 4828.00 368.00
13th - Floor L 2336.00 359.00 3280.00 2752.00 312.00 321.00 334.00 1133.00 794.00 3128.00 3172.00 5058.00 385.00
14th - Floor L 2443.00 375.00 3429.00 2877.00 327.00 336.00 350.00 1185.00 830.00 3271.00 3317.00 5288.00 403.00
15th - Floor L 2549.00 391.00 3578.00 3002.00 341.00 350.00 365.00 1236.00 866.00 3413.00 3461.00 5518.00 420.00
119
Sl.
SECTION NAMES OF THE APPROVED BRAND/ MANUFACTURER/ SUPPLIER
No
III SUB-SECTION Aerocon, Siporex, Nucon, NCL
(Landing cost - including material VAT, loading, cost of conveyance,
I SUB-SECTION NON-PORCELAIN CERAMIC FLOOR TILES - Somany, H & R Johnson, Naveen
Ceramics, Kajaria, Nitco, Sphinx, Orient Bell, AGL, Hindware
II SUB-SECTION PORCELAIN VITRIFIED FLOOR TILES - H & R Johnson, H & R Johnson Marbonite,
H & R Johnson Endura, H & R Johnson GPS, Naveen Ceramics, Kajaria, Nitco, Orient
Bell, Hindware, AGL
III SUB-SECTION CERAMIC WALL TILES - Somany, H & R Johnson, Kajaria, Sphinx, Orient Bell,
AGL, Hindware
IV SUB-SECTION PORCELAIN WALL TILES - Somany, H & R Johnson, Kajaria, Sphinx, Orient Bell,
Hindware
V SUB-SECTION GLASS MOSAIC TILES - Bisazza,
VI SUB-SECTION WALL CLADDING TILES - Somany, H & R Johnson, Kajaria, Sphinx, Orient Bell,
Hindware
VII SUB-SECTION TERRAZZO FLOOR TILES (PLAIN & CHEQURED) - Super Decorative, Aditya
Designer, Maha Bhima, Tricon, Pheonix, Eurocon, Ultra, Sphinx
VIII SUB-SECTION CEMENT CONRETE FLOOR TILES (PLAIN & CHEQUERED) - Super Decorative,
Aditya Designer, Maha Bhima, Tricon, Pheonix, Eurocon, Ultra, Sphinx
IX SUB-SECTION PRE-CAST CONCRETE BLOCKS FOR PAVING - Super Decorative, Aditya
Designer, Maha Bhima, Tricon, Pheonix, Eurocon, Ultra, Sphinx
X SUB-SECTION VINYL FLOORING - Marblex, Amstrong,
TILE ADHESIVE MYK LATICRETE, JK Super Grip
F SECTION GLASS MATERIALS - Modifloat, Asahi, Saintgobain, Binani, HNG,
G SECTION PAINTS & POLISHES - Asian, Berger, Nerolac, British Paints, JK Cements, Saicoat,
Indocem, ESSAR, Sheenlac, Suryacem, Neon, Wallz, Walrus SYNTHETIC PLASTER
- NCL Alltek, MYK LATICRETE, Multichem, Essar, J.K. White Cement, J.K.Wall Putty
(White cement based), JK Primaxx(White Cement Based Primer), Smoothtek
H SECTION PARTICLE BOARDS - NCL Bison, Ramco-Hilux, Ramco-Hicem, Everest-board,
Visakha-board, Rajshri, Innsula, Aerocon, Aerolite, Novopan, Bhutan-board
J SECTION PLYWOODS, LAMINATES & VENEERS - Kitply, Century Ply, National Ply, Bhutan
Ply, Samrat, Gurjan ply, Aamoda, Mayur, Amul Boards
K SECTION CEILINGS, WALL PARTITIONS & WALL LININGS - Ramco-Hilux, Everest-board,
Visakha-board, Rajshri, Innsula, Gypsum India, Saintgobain, Armstrong, Daikin,
NCL-Seccolor, NCL Bison,
L SECTION DOORS, SHUTTERS & FRAMES - NCL-Seccolor, Anand, Raavila, Kutty, Standard,
Shubhdwar, ITP, Rajshri, NCL-Bison, Elixir, Sintex, Elgi, Oasis, Polywood, Sintex,
NCL-Wintech, Fenesta, LG, Masonite, Everest, Vishaka, Ambience, Aamoda
M SECTION WINDOWS - NCL-Seccolor, NCL-Bison, Elixir, Sintex, Elgi, Oasis, Polywood, NCL-
Wintech, Fenesta, LG, Ahlada
N SECTION STRUCTURAL GLAZING & CURTAIN WALLING - NCL-Seccolor, NCL-Bison, Elixir,
Sintex, Elgi, Oasis, Polywood, Sintex, NCL-Wintech, Fenesta, LG
P SECTION FIXTURES FOR DOORS & WINDOWS - Jyoti, Classic, Hardwyn
Q SECTION CONSTRUCTION CHEMICALS & ADMIXTURES
MAKE, APPLICATION METHOD, AREA AND DOSAGE
I SUB-SECTION PLASTICIZERS
TBSC-Q.I-01 * Consplax of Armstrong Chemicals Pvt Ltd, Bengaluru * Conplast of Fosroc
Chemicals India Pvt Ltd, Bengaluru (200ml /50Kgs Cement)* Zoriplax of Protect
More Construction chemicals, Hyderabad. (Dosage 20ml per 50 Kgs cement). for
M 20 + grade concrete works in slabs /canal lining works/ roads works
120
Sl.
No
TBSC-Q.I-02 * Roofplast HS 100 of Armstrong Chemicals Pvt Ltd, Bengaluru * Structuro100 of
Fosroc Chemicals India Pvt Ltd, Bengaluru * Zoriplast HS of Protect More
Construction Chemicals,
TBSC-Q.I-03 *Roofplast SP 35of Armstrong Chemicals Pvt Ltd. Bengaluru *Conplast SP 337 of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriplast SP 350 of Protect More
Construction chemicals. * Rheomac 707 of BASF *Conflow (Dosage: 200ml to
500ml per bag of 50 Kgs Cement) . for M30+ grade concrete works like road
projects / Canal linings / Dams / Reservoirs / Buildings concrete works *
Power35 of ESSAR (Dosage : 300 ml to 500 ml Per Bag of 50 Kgs Cement)
TBSC-Q.I-04 *Roofplast SP 45 of Armstrong Chemicals Pvt Ltd, Bengaluru*Consplast SP 430 of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriplast SP 450 of Protect More
Construction Chemicals (Dosage: 200ml to 500ml per bag of 50 Kgs Cement) for
high early strength and high range water reducing admixture for M40+ grade
concrete works like road projects / Canal linings / Dams / Reservoirs / Buildings
concrete works *Power45 of ESSAR (Dosage : 300 ml to 500 ml Per Bag of 50 Kgs
Cement)
TBSC-Q.I-05 *Roofplast SR 45 of Armstrong Chemicals Pvt Ltd, Bengaluru*Conplast RP264 of
Fosroc Chemicals India Pvt Ltd, Bengaluru*Zoriplast SRT 5 of Protect More
Construction Chemicals (Dosage : 300ml to 400ml per bag of 50 Kgs Cement).For
delaying of initial setting time and M 40+ Grade concrete works * Power SR 45 of
ESSAR (Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement)
TBSC-Q.I-06 *Roofplast SCA of Armstrong Chemicals Pvt Ltd, Bengaluru*Conplast NC of
Fosroc Chemicals India Pvt Ltd, Bengaluru*Zoriset of Protect More Construction
Chemicals (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs Cement depending on the
setting time required).For shotcrete / Gunniting / Emergency concrete works *
Power-200 of ESSAR or Equivalent (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs
Cement depending on the setting time required )
II SUB-SECTION WATER PROOFING COMPOUNDS
TBSC-Q.II-01 *Rainproof No.1 of Armstrong Chemicals Pvt Ltd Bengaluru *Conplast 421 of
Fosroc Chemicals India Pvt Ltd Bengaluru (125ml Per 50 Kgs Cement) *Zoriproof
No.1 of Protect More construction Chemicals. : (Dosage : 100ml Per Bag of 50 Kgs
Cement)
TBSC-Q.II-02 *Roofbond RFX of Armstrong Chemicals Pvt Ltd, Bengaluru. *Brushbond RFX of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoricoat RX of Protect More
Construction Chemicals.*Masreseal 550 Grey of Base. (1214 m2 in two coats to
achieve 1mm thickness ). Terrace, Water Tanks, Walls Waterproof Coatings : of
Two Part System: *Essar - Power RFx
TBSC-Q.II-03 * Roofcoat of Armstrong Chemicals Pvt Ltd, Bengaluru * Brushbond of Fosroc
Chemicals India Pvt Ltd, Bengaluru * Zoricoat of Protect More Construction
Chemicals Terrace, Water Tanks, Walls, Reservoirs Waterproofing Coatings :
Surface treatments* Asian Paints
TBSC-Q.II-04 *Rainseal of Armstrong Chemicals Pvt Ltd, Bengaluru *Proofex SM of Fosroc
Chemicals India Pvt Ltd, Bengaluru, *Zoricoat XL of Protect More Construction
Chemicals. , wherever highly flexible, crack bridging ,waterproofing
required(Coverage : 50 to 60 SFT Per/Ltr/Coat) (for brush / spray application
add 20% water per Ltr )Terrace, Walls Highly Flexible Waterproof Liquid
Membrane pure Acrylic Coatings :
TBSC-Q.II-05 *Rapidstrong QS of Armstrong Chemicals Pvt Ltd Bengaluru *Patchro C of Fosroc
Chemicals India Pvt Ltd, Bengaluru *Zorirapidr of Protect More Construction
Chemicals * Conflow (Dosage : 1 to 3 Ltrs per bag of 50 Kgs Cement depending
on the setting time required). * Concare Plus (200 -250 ml per Bag of cement)For
emergency works/Anti wash and under water concreting:
121
Sl.
No
TBSC-Q.II-06 *Rainseal Flexi Coat B30 of Armstrong Chemicals Pvt Ltd, Bengaluru *Fosroc
Chemicals India Pvt Ltd, Bengaluru. *Zoricoat BL of Protect More Construction
Chemicals. : wherever highly flexible, crack bridging, Sewage treatment plants,
pipe lines, Reservoirs and waterproofing required.
III SUB-SECTION BONDING AGENTS
TBSC-Q.III-01 *Roofbond PB of Armstrong Chemicals Pvt Ltd Bengaluru *Nitobond AR of Fosroc
Chemical India Pvt Ltd Bengaluru *Zoribond PB of Protect More Construction
Chemicals. (Mix: 1:1 ratio of cement )50 SFT / Ltr /coat depending on the
substrate) On terrace old concrete to new mortar / screed :
TBSC-Q.III-02 *Roofbond SBR of Armstrong Chemicals Pvt Ltd Bengaluru *Nitobond SBR of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoribond SBR of Protect More
Construction Chemicals. (50 SFT / Ltr /coat depending on the substrate) For
ceiling / concrete repairs and bonding : mortar/concrete
TBSC-Q.III-03 *Roofbond EP of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitobond EP of Fosroc
Chemicals India Pvt Ltd, Bengaluru*Zoribond EP of Protect More Construction
Chemicals. (Coverage : 20 25 SFT / Kg /Coat) For Structural concrete repairs /
bonding : Old concrete to new concrete epoxy bonding :
IV SUB-SECTION ANTI-CORROSIVE AGENTS
TBSC-Q.IV-01 *Roofguard AC of Armstrong Chemicals Pvt Ltd Bengaluru *Fosroc Chemicals
India Pvt Ltd Bengaluru*Zoriguard AC of Protect More Construction Chemicals.(
40 SFT Per Ltr / Coat ) * Concare-XL (200 ml to 250 ml per Bag of Cement To
protect the exposed reinforcement / steel structures against corrosion :
TBSC-Q.IV-02 *Roofguard RC of Armstrong Chemicals Pvt Ltd Bengaluru *Fosroc Chemicals
India Pvt Ltd, Bengaluru *Zoriguard RC of Protect More Construction Chemicals
Hyderabad. ( 50 SFT Per Ltr / Coat ) During repairs to protect, to convert the rust
of reinforcement / steel :
TBSC-Q.IV-03 *Roofguard ZP of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitoprime Zinc Rich of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriguard ZP of Protect More
Construction Chemicals, Hyderabad. (Coverage : 4 Sq.Mtr. /Ltr / Coat)
TBSC-Q.IV-04 Supply of anti-corrosion admixture inhibitor liquid as per Central Electro
Chemical Research Institute developed specification and licensee of Concare or
Concare Plus or Equivalent (300 ml to 500 ml per Bag of 50 Kgs Cement)
V SUB-SECTION GROUTS
TBSC-Q.V-01 *Rapidstrong Grout AG of Armstrong Chemicals Pvt Ltd, Bengaluru*Lockfix of
Fosroc Chemicals India Pvt Ltd, Bengaluru*Zorifix of Protect More Construction
Chemicals (Yield 0.5 Ltrs / 1 Kg Pack ) Anchoring / fix the
steel bars into the rocks, concrete for foundations, extension of concrete :*Essar
Power Anchor grout . (Yield 0.5 Ltrs / 1 Kg Pack)
TBSC-Q.V-02 *Rapidstrong Grout GP2 of Armstrong Chemicals Pvt Ltd, Bengaluru*Conbextra
GP2 of Fosroc Chemicals India Pvt Ltd, Bengaluru*Zorigrout GP 2 of Protect More
Construction Chemicals For machinery / thin sections of concrete joints Filling :
*Essar Power GP2 Grout (Yield 13.5 Ltrs Per 25 Kgs Bag).
TBSC-Q.V-03 *Rapidstrong Grout EP of Armstrong Chemicals Pvt Ltd , Bengaluru*Conbextra
EP10 of Fosroc Chemicals India Pvt Ltd, Bengaluru *Zorigrout EP of Protect More
Construction Chemicals. (Two parts system).(Density 1.07 Kg Per Ltr )For
Structural strengthening, filling of honey comb / voids in the concrete : *Essar
Power EPL Grout
TBSC-Q.V-04 *Rapidstrong Grout EP3 of Armstrong Chemicals Pvt Ltd, Bengaluru *Conbextra
EP300 of Fosroc Chemicals India Pvt Ltd, Bengaluru *Zorigrout EP3 of Protect
More Construction Chemicals. Concrete strengthening and filling concrete repairs
*Essar Power EP Grout
VI SUB-SECTION MISCELLANEOUS CHEMICALS
122
Sl.
No
TBSC-Q.VI-01 *Roofcare MRA of Armstrong Chemicals Pvt Ltd, Bengaluru *Reebol of Fosroc
Chemicals India Pvt Ltd, Bengaluru *Zorislip of Protect More Construction
Chemicals (Coverage: 1 Ltr will cover approx 20 to 30m2 on method and
material of the form )
TBSC-Q.VI-02 *Rapidstrong FM of Armstrong Chemicals Pvt Ltd, Bengaluru *Fosroc Chemicals
India Pvt Ltd. Bengaluru. *Zorifloor NH of Protect More Construction Chemicals.
:( Coverage : May be applied at rate 3.5 Kgs /m2 over green concrete for normal
traffic & 6-12 Kg / M2 for heavy traffic. Higher application rates yield better
abrasion resistance)* Essar PowerHard M-100
TBSC-Q.VI-03 * Rapidstrong NH of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitoflor
Hardtop/Hard Standard of Fosroc Chemicals India Pvt Ltd, Bengaluru. * Zorifloor
DH of Protect More Construction Chemicals* Mastertof 100 Grey of BASF :(
Coverage : May be applied at rate 3.5 Kgs /m2 over green concrete for normal
traffic & 6-12 Kg / M2 for heavy traffic. Higher application rates yield better
abrasion resistance) *Essar PowerHard NM-100. (Coverage: May be applied at
rate 3.5 Kgs /m2 over green concrete for normal traffic & 6-12 Kg / M2 for heavy
traffic)
TBSC-Q.VI-04 *Roofcrete MC of Armstrong Chemicals Pvt Ltd, Bengaluru / *Rendroc RG of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoricrete MC of Protect More
Construction Chemicals.
TBSC-Q.VI-05 *Roofcrete AR of Armstrong Chemicals Pvt Ltd, Bengaluru *Cemtop 400 SD of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoricrete CMG of Protect More
Construction Chemicals. To achieve High Strength Concreting / Structural
rehabilitation / concrete repairs :
TBSC-Q.VI-06 *Roofcrete EM of Armstrong Chemicals Pvt Ltd, Bengaluru *Fosroc Chemicals
India Pvt Ltd, Bengaluru *Zoricrete ERM of Protect More Construction
Chemicals.For wherever repeated failures takes place, resistance to chemicals.
Repairing of Detoriated concrete with High Strength Flexural / Compressive
Strength with High Standard Bonding:
TBSC-Q.VI-07 *Roofex of Armstrong Chemicals Pvt Ltd, Bengaluru *Brushbond Tap of Fosroc
Chemicals India Pvt Ltd, Bengaluru *Zoripex of Protect More Construction
Chemicals. For Negative Water Pressure Treatments like Cellar / Ceiling areas
etc., :
TBSC-Q.VI-08 *Roofseal PU of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitoseal PU 280 of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriseal PU of Protect More
Construction Chemicals. For Expansion Joints / Terrace Cracks / Wall & Beam
junction cracks ; Runway Joints etc., :
TBSC-Q.VI-09 * Roofseal PS of Armstrong Chemicals Pvt Ltd, Bengaluru * Thioflex 600 of Fosroc
Chemicals India Pvt Ltd, Bengaluru * Zoriseal PS of Protect More Construction
Chemicals. For Expansion Joints / Terrace Cracks :
TBSC-Q.VI-10 *Wonderseal XL of Armstrong Chemicals Pvt Ltd, Bengaluru *Decofil of Fosroc
Chemicals India Pvt Ltd, Bengaluru *Zoriseal XL of Protect More Construction
Chemicals. External / Internal Wall Cracks Sealing
TBSC-Q.VI-11 *Wonderseal Plug of Armstrong Chemicals Pvt Ltd, Bengaluru *Renderroc Plug of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriseal Plug of Protect More
TBSC-Q.VI-12 *Roofcoat PU400 of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitocote UR 512 of
Fosroc Chemicals India Pvt Ltd, Bengaluru*Zoricoat PU of Protect More
Construction Chemicals. for floorings / Walls.
TBSC-Q.VI-13 *Roofguard CTE of Armstrong Chemicals Pvt Ltd, Bengaluru*Nitocote ET 550 of
Fosroc Chemicals India Pvt Ltd, Bengaluru/ *Zoriguard CTE of Protect More
Construction Chemical. : tar based epoxy coating for sewage treatment plants,
pipe lines protective coating for steel reinforcement.
123
Sl.
No
TBSC-Q.VI-14 *Roofexcure WB of Armstrong Chemicals Pvt Ltd, Bengaluru *Concure WB of
Fosroc Chemicals Pvt Ltd, Bengaluru *Zoricure WB of Protect More Construction
Chemicals. (Coverage : 4 Sq. Mtrs / Ltr / Coat )
TBSC-Q.VI-15 *Rainseal BS of Armstrong Chemicals Pvt Ltd, Bengaluru *Fosroc Chemicals India
Pvt Ltd, Bengaluru. *Zoriseal BS Grade A of Protect More Construction Chemicals.
for construction joints of roads / bridges.
TBSC-Q.VI-16 *Rainseal BT Primer of Armstrong Chemicals Pvt Ltd, Bengaluru *Nitoproof 100 of
Fosroc Chemicals India Pvt Ltd, Bengaluru *Zoriprime BT of Protect More
TBSC-Q.VI-17 *Roofplast AEA of Armstrong Chemicals Pvt Ltd Bengaluru*Conplast AEA of
Fosroc Chemicals India Pvt Ltd, Bengaluru (Dosage : 200ml Per 50 Kgs
Cement)*Zoriplast AEA of Protect More Construction Chemicals. (Dosage : 15ml
to 20ml per bag of 50 Kgs Cement) For entrainment of air, recommended for canal
lining works, mass concreting etc : *Essar Power AEA Plasticizer (Dosage : 15ml
per Bag of 50 Kgs Cement)
VII SUB-SECTION REPAIRING & TREATMENT WORKS
TBSC-Q.VII-1 RAINSEAL FELT of Armstrong / Fosroc / ZORIFELT BT of PMCC
TBSC-Q.VII-2 RAINSEAL HDP 1500 of Armstrong / Fosroc / ZORISHIELD 1500 of PMCC / Roof
shield
TBSC-Q.VII-3 RAINSEAL BT PRIMER of Armstorng / Fosroc / /STP/PMCC/ Asian
TBSC-Q.VII-4 ROOFBOND RFX of Armstrong /BRUSHBOND RFX of Fosroc / ZORIBOND RFX of
PMCC.
TBSC-Q.VII-5 RAINSEAL FLEXICOAT B 300 of Armstrong / NITOPROOF 120 of Fosroc
/ZORICOAT BL of PMCC (Coverage : 1Ltr /100 SFT/ Each Coat) diluting with
water at 1:1 ratio as a primer coat. RAINSEAL FLEXICOAT B 300 of Armstrong /
NITOPROOF 120 of Fosroc /ZORICOAT BL of PMCC top coat diluting with 20% of
water (Coverage : 1Ltr /5 Sqm /Each Coat)
TBSC-Q.VII-6 RAINSEAL of Armstrong /PROOFEX SM of Fosroc / ZORICOAT XL of SMCC(1
Ltr/10 Sq.Mtr./Each Coat) diluting with water at 1:1 ratio as a primer coat , Next
coat with with RAINSEAL of Armstrong / PROOFEX SM of Fosroc / ZORICOAT
XL of PMCC mixing with 20 % of Water. (1 Ltr/5 Sq.Mtr/Each Coat) final coat
withRAINSEAL of Armstrong /PROOFEX SM of Fosroc / ZORICOAT XL of PMCC
(1 Ltr/2 Sq.Mtr/Each Coat)diluting with 20% of water.
TBSC-Q.VII-7 Polymer bonding agent: ROOFBOND SBR of Armstrong / NITOBOND SBR of
Fosroc / ZORIBOND SBR of PMCC (Coverage : 1 Ltr /5 Sqm / Each Coat), next with
- Acrylic Polymer modified reinstatement concrete /mortar ROOFCRETE AR of
Armstrong / CEMTOP 400 SD of Fosroc/ZORICRETE CMG of PMCC to finish and
polysulphide sealant with ROOFSEAL PS of Armstrong / THIOFLEX 600 of Fosroc
/ ZORISEAL PS of PMCC (Coveragae : 1 Kg Per 1.8 RMT ) finally with
ROOFCOAT of Armstrong / BRUSHBOND of Fosroc /ZORICOAT of PMCC mixing
with Cement at 1: 2 ratio. (Coverage : 1 Ltr / 2.5 Sqm /Coat)
TBSCC-Q.VIII-01-
11 Silseal, Silflex, Armour, Shalitex
R SECTION MISCELLANEOUS ITEMS
(a) Sintex for PVC tanks(b) Centurywells for Galvalume sheets (c) Elixir for PEB
structures (d) Alluminium Sections - Hindalco, Nalco, Jindal (e) ACP Sheets -
Alucopanel, alucobonel, Reynobond, Lennox Durabuid, Alstrong legame, Alpolic,
Alcomat, Alshine, Viva
124
INDEX FOR PLUMBING ITEMS OF TELANGANA BUILDINGS SoR: 2015-16
Sl.
No
A SECTION S.W.G. PIPES & FITTINGS
stacking)
I SUB-SECTION TBSP-A.I-01-09 SUPPLY & LAYING OF SWG PIPES
II SUB-SECTION TBSP-A.II-01-59 S.W.G. FITTINGS
III SUB-SECTION TBSP-A.III-01-05 LABOUR CHARGES FOR SWG WORKS
B SECTION MANHOLES & INSPECTION CHAMBERS
I SUB-SECTION TBSP-B.I-01-04 MANHOLES
II SUB-SECTION TBSP-B.II-01-13 INSPECTION CHAMBERS
III SUB-SECTION TBSP-B.III-01-01 LABOUR CHARGES FOR IC WORKS
C SECTION CENTRIFUGAL CI PIPES & FITTNGS - IS :
1729
I SUB-SECTION TBSP-C.I-01-06 SUPPLY & LAYING OF CAST IRON PIPES
II SUB-SECTION TBSP-C.II-01-33 SUPPLYING & LAYING OF C.I. FITTINGS
III SUB-SECTION TBSP-C.III-01-08 LABOUR CHARGES FOR CI PIPE WORKS
D SECTION CENTRIFUGAL CI PIPES & FITTNGS - IS :
3989
I SUB-SECTION TBSP-D.I-01-13 SUPPLY OF CENTRIFUGAL CI PIPES
II SUB-SECTION TBSP-D.II-01-95 SUPPLY OF C.I. SPUN FITTINGS
E SECTION VITREOUS CHINAWARE - SANITARY
APPLIANCES
I SUB-SECTION TBSP-E.I-01-07 INDIAN WATER CLOSETS
II SUB-SECTION TBSP-E.II-01-06 FLOOR MOUNTED EWC
III SUB-SECTION TBSP-E.III-01-03 WALL MOUNTED EWC
IV SUB-SECTION TBSP-E.IV-01-03 CISTERNS FOR WATER CLOSETS
V SUB-SECTION TBSP-E.V-01-02 PLASTIC SEATS FOR WATER CLOSETS
VI SUB-SECTION TBSP-E.VI-01-16 WASH HAND BASINS
VII SUB-SECTION TBSP-E.VII-01-04 URINALS
VIII SUB-SECTION TBSP-E.VIII-01-12 LABOUR CHARGES FOR SANITARY WARE
F SECTION CP FITTINGS - TAPS, FAUCETS &
ACCESSORIES
I SUB-SECTION TBSP-F.I-01-08 TAPS & FAUCETS - BIB TAPS
II SUB-SECTION TBSP-F.II-01-09 TAPS & FAUCETS - PILLAR TAPS
III SUB-SECTION TBSP-F.III-01-07 TAPS & FAUCETS - OTHER TAPS &
SPOUTS
IV SUB-SECTION TBSP-F.IV-01-07 STOP & ANGLE VALVES
V SUB-SECTION TBSP-F.V-01-09 COMBINATION FAUCETS
VI SUB-SECTION TBSP-F.VI-01-08 SHOWER ROSES & FITTINGS
VII SUB-SECTION TBSP-F.VII-01-41 MISCELLANEOUS CP FITTINGS
VIII SUB-SECTION TBSP-F.VIII-01-05 LABOUR CHARGES
G SECTION G.I. PIPES & FITTINGS
I SUB-SECTION TBSP-G.I-01-13 G.I. PIPES
125
Sl.
No
II SUB-SECTION TBSP-G.II-01-24 G.I. FITTINGS
III SUB-SECTION TBSP-G.III-01-27 BRONZE (COPPER ALLOY) VALVES
IV SUB-SECTION TBSP-G.IV-01-03 LABOUR CHARGES FOR G.I PLUMBING
H SECTION PVC PIPES & FITTINGS
I SUB-SECTION TBSP-H.I-01-44 PVC PIPES
II SUB-SECTION TBSP-H.II-01-96 PVC FITTINGS
III SUB-SECTION TBSP-H.III-01-10 PVC PLUMBING ACCESSORIES
IV SUB-SECTION TBSP-H.IV-01-03 LABOUR CHARGES FOR PVC PLUMBING
J SECTION MISCELLANEOUS ITEMS
I SUB-SECTION TBSP-J.I-01-40 MISCELLANEOUS PLUMBING WORK
ITEMS
II SUB-SECTION TBSP-J.II-01-17 POLYETHYLENE-ALUMINIUM-
POLYETHYLENE COMPOSITE PIPES
III SUB-SECTION TBSP-J.III-01-195 OTHER VARIETIES OF PIPES
126
PLUMBING ITEMS
127
SS RATE
Sl.
ITEM CODE DESCRIPTION OF THE ITEM UNIT FOR 2016-
No
17
1 2 3 4 5
Note: All the prices of the materials are landing costs,
including material VAT, loading, cost of conveyance,
unloading & stacking at site.
I SUB-SECTION SUPPLY & LAYING OF S.W.G. PIPES
1 TBSP-A.I-01 Supplying, laying, jointing and testing 101.6 mm SWG SP-1 1 RM 497.00
pipes of ISI make conforming to ISI 651 & 4127 with airtight
cement joints in CM 1.5:1 prop. Including excavation of
trenches and socket pits in any soil (except rock requiring
blasting) up to 1524 mm(5'0") depth and refilling with
watering and tamping.
cement joints in CM 1:5:1 prop. including excavation of
blasting) up to 914.4 mm (3'0") depth and refilling with
cement joints in CM 1.5:1 prop. including excavation of
blasting) up to 1524 mm(5'0") depth and refilling with
cement joints in CM 1.5:1 prop. including excavation of
blasting) up to 914.4 mm (3'0")) depth and refilling with
5 TBSP-A.I-05 Providing 152.4 mm CC bed 1:2:4 Prop: using 19.05 mm 1 RM 132.00
gauge graded granite metal chips and cradling 101.6 mm
SWG pipe line all round to have 75 mm nominal size thick
cover over the sockets.
6 TBSP-A.I-06 Providing 152.4 mm CC bed 1:2:4 Prop: using 19.05 mm 1 RM 228.00
gauge graded granite metal chips and cradling 152.4 mm
SWG pipe line all round to have 75 mm nominal size thick
cover over the sockets.
7 TBSP-A.I-07 Supplying & Laying 101.6 mm SWG channels with cement 1 RM 91.00
mortar joints with suitable brick masonry for fixing the
channels in position
8 TBSP-A.I-08 Supplying & Laying 152.4 mm SWG channels with cement 1 RM 171.00
mortar joints with suitable brick masonry for fixing the
channels in position
9 TBSP-A.I-09 Supplying & fixing 150 mm x 100 mm SWG gully traps Each 596.00
conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick
masonry in CM 1:6 prop. Intermediate chamber and fitted
with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged
cover
II SUB-SECTION S.W.G. PIPES & FITTINGS
128
SS RATE
Sl.
No
17
1 2 3 4 5
10 TBSP-A.II-01 Supply of SWG SP-1 pipe conforming to ISI 651 - 4" dia 1 RM 181.00
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
14 TBSP-A.II-05 Supply of SWG SP-1 pipe conforming to ISI 651 - 12" dia 1 RM 1,280.00
(300 mm)
(350 mm)
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
(300 mm)
(350 mm)
(400 mm)
(450 mm)
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
(300 mm)
(350 mm)
(400 mm)
(450 mm)
32 TBSP-A.II-23 Supply of SWG Bends conforming to IS standards -100 mm Each 91.00
dia
dia
129
SS RATE
Sl.
No
17
1 2 3 4 5
dia
dia
dia
37 TBSP-A.II-28 Supply of SWG Bends conforming to IS standards -350 mm Each 1,020.00
dia
38 TBSP-A.II-29 Supply of SWG Junctions (T's & Y's) conforming to IS Each 175.00
standards with length of barrel 60 cm for - 100 x 100
46 TBSP-A.II-37 Supply of SWG Junctions (T's & Y's) conforming to IS Each 1,031.00
130
SS RATE
Sl.
No
17
1 2 3 4 5
59 TBSP-A.II-50 Supply of SWG Plugs conforming to IS standards for 100 Each 33.00
mm dia
mm dia
mm dia
mm dia
mm dia
mm dia
65 TBSP-A.II-56 Supply of SWG Gully Traps (Round & Square) conforming to Each 254.00
IS standards 150 x 100 mm
66 TBSP-A.II-57 Supply of SWG Saddles conforming to IS standards 150 x Each 184.00
100 mm
100 mm
100 mm
III SUB-SECTION LABOUR CHARGES FOR SWG WORKS
69 TBSP-A.III-01 Labour charges only for laying, jointing and testing SWG 1 RM 236.00
pipes of any dia with airtight cement joints including
excavation of trenches and socket pits in any soil up to
914.4 mm (3'0") depth (except rock requiring blasting) and
refilling with watering and tamping.
70 TBSP-A.III-02 Labour charges only for laying, jointing and testing SWG 1 RM 293.00
pipes of any dia with airtight cement joints including
excavation of trenches and socket pits in any soil up to 1524
mm (5'-0") depth (except rock requiring blasting) and
refilling with watering and tamping.
71 TBSP-A.III-03 Labour charges only for laying 101.6 mm SWG channels 1 RM 37.00
with cement mortar joints with suitable brick masonry for
fixing the channels in position
72 TBSP-A.III-04 Labour charges only for laying 152.4 mm SWG channels 1 RM 51.00
with cement mortar joints with suitable brick masonry for
fixing the channels in position
73 TBSP-A.III-05 Labour charges only for fixing and laying the SWG Each 31.00
Junctions/ Plugs/ Bends of any dia with airtight cement
joints as per standard practice
B SECTION MANHOLES & INSPECTION CHAMBERS - AS PER - IS -
4111 : Part 1 : 1986
I SUB-SECTION MANHOLES
131
SS RATE
Sl.
No
17
1 2 3 4 5
74 TBSP-B.I-01 Constructing 904.0 mm (30) dia solid block masonry Each 6,846.00
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using fly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mm including plastering with cement
mortar 1:3 prop; thick both inside and outside fitted
with 20 dia RCC manhole covers and frames including
excavating pits up to a depth of 904 mm (3'-0") in all sorts
of soils (excluding rock) and laying cement concrete (1:4:8)
150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and
operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for
finished item of work as per Standard specification.
75 TBSP-B.I-02 Constructing 904.0 mm (30) dia solid block masonry Each 10,795.00
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using fly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mm including plastering with cement
mortar 1:3 prop; thick both inside and outside fitted
with 20 dia RCC manhole covers and frames including
excavating pits up to a depth of 1524 mm (5'-0") in all sorts
of soils (excluding rock) and laying cement concrete (1:4:8)
150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all
materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and
operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for
finished item of work as per Standard specification.
76 TBSP-B.I-03 Constructing 904.0 mm (30) dia brick masonry inspection Each 6,748.00
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3
prop; thick both inside and outside fitted with 20 dia
RCC manhole covers and frames including excavating pits
up to a depth of 904 mm (3'-0") in all sorts of soils
(excluding rock) and laying cement concrete (1:4:8) 150
mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching
and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement,
sand, bricks, water etc., to site, cost of seigniorage charges
on all materials and all incidental and operational, labour
charges like mixing cement mortar, constructing masonry,
lift charges, curing etc., complete for finished item of work
as per Standard specification.
132
SS RATE
Sl.
No
17
1 2 3 4 5
77 TBSP-B.I-04 Constructing 904.0 mm (30) dia brick masonry inspection Each 10,599.00
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mm including plastering with cement mortar 1:3
prop; thick both inside and outside fitted with 20 dia
RCC manhole covers and frames including excavating pits
up to a depth of 1524 mm (5'-0") in all sorts of soils
(excluding rock) and laying cement concrete (1:4:8) 150
mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching
and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement,
sand, bricks, water etc., to site, cost of seigniorage charges
on all materials and all incidental and operational, labour
charges like mixing cement mortar, constructing masonry,
lift charges, curing etc., complete for finished item of work
as per Standard specification.
II SUB-SECTION INSPECTION CHAMBERS & COVERS
78 TBSP-B.II-01 Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in Each 6,091.00
CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm
(3'0") and fitted with light weight 914.4 mm x 457.2 mm
(3'0"x1'6") C.I frame and cover of 40 Kg.
79 TBSP-B.II-02 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM Each 3,672.00

1:6 prop. Masonry. Inspection chamber up to 914.4 mm
(3'0") and fitted with light weight 457.2 mm x 457.2 mm
(1'6"x1'6") C.I frame and cover of 20 Kg.
80 TBSP-B.II-03 Constructing Brick masonry chamber over the gully trap or Each 455.00
peet valve and fitted with 304.8 x 228.6 m size CI frame and
hinged cover.
81 TBSP-B.II-04 Constructing Brick masonry support for G.I pipe with C.M Each 73.00
304.8 x 228.6 x228.6 mm size including plastering and
finishing etc. complete.
82 TBSP-B.II-05 Supply & fixing RCC cover 22" dia with nominal Each 705.00
reinforcement 3 " thick and hooks for lifting
83 TBSP-B.II-06 Supplying & fixing 304.8 x 228.6 mm CI frame & cover over Each 119.00
gully taps
84 TBSP-B.II-07 Supplying & fixing CI Nahany trap grating Each 19.00
85 TBSP-B.II-08 Supplying & fixing CI gully trap grating Each 48.00
86 TBSP-B.II-09 Supplying & fixing 914.4 x 457.2 mm CI man hole frame and Each 1,939.00
cover (light weight) 30 Kgs
87 TBSP-B.II-10 Supplying & fixing 602 x 602 mm CI man hole frame and Each 2,887.00
cover (light weight) 30 Kgs
88 TBSP-B.II-11 Supplying & fixing CI steps for septic tank. Each 62.00
89 TBSP-B.II-12 Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover Each 1,247.00
for 914.4 mm dia chamber (20 Kgs - Light weight)
90 TBSP-B.II-13 Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover Each 2,575.00
for 914.4 mm dia chamber (Medium weight) as per IS:1726
- 40 Kgs
133
SS RATE
Sl.
No
17
1 2 3 4 5
III SUB-SECTION LABOUR CHARGES FOR IC WORKS
91 TBSP-B.III-01 Making drainage connection from a drainage line in to an Each 128.00
existing inspection chamber/ manhole including making a
hole in to the chambers, placing necessary pipes in the
connection and making good the junction in and out of the
chambers including cost of necesary cement, sand and
aggregate etc.,
C SECTION C.I. PIPES & FITTINGS - AS PER - IS 1729:1979
(Materials shall be procured from the list of approved
Brands/ Manufacturers/ Suppliers)
I SUB-SECTION SUPPLYING & LAYING OF C.I. PIPES
92 TBSP-C.I-01 Supplying and fixing of C.I. soil pipes ISI marked 1 RM 760.00
conforming to IS:1729-1979 of approved make with cement
caulked joints and fixing as per site requirements including
painting black with Japan paint and fixing with necessary
wooden blocks fixed in the masonry walls in cement mortar
(1:1) including fixing of M.S. clamps if necessary with
required no. of Bombay nails etc., complete for 3" dia (75
mm nominal size) Single Socket
required no. of Bombay nails etc., complete for 4" dia
(101.6mm) Single Socket
94 TBSP-C.I-03 Supplying and fixing of C.I. soil pipes ISI marked 1 RM 1,598.00
(152.4mm) Single Socket
required no. of Bombay nails etc., complete for 3" dia (75
mm nominal size) Double Socket
134
SS RATE
Sl.
No
17
1 2 3 4 5
(101.6mm) Double Socket
(152.4mm) Double Socket
II SUB-SECTION SUPPLYING & LAYING OF C.I. FITTINGS
98 TBSP-C.II-01 Supplying & fixing CI Plain bends Ist quality ISI marked Each 296.00
conforming to IS:1729-1979 with cement caulked joints and
fixing as per site requirements with standard practice for 3"
dia (75 mm nominal size)
dia (101.6 mm)
dia (152.4 mm)
101 TBSP-C.II-04 Supplying & fixing CI Plug (Door) bends Ist quality ISI Each 367.00
marked conforming to IS:1729-1979 with cement caulked
joints and fixing as per site requirements with standard
practice for 3" dia (75 mm nominal size)
practice for 4" dia (101.6 mm)
practice for 6" dia (152.4 mm)
104 TBSP-C.II-07 Supplying and fixing of 75 mm nominal size (3") CI soil Each 462.00
single junction with plug : conforming to IS:1729-1979 with
cement caulked joints and fixing
105 TBSP-C.II-08 Supplying and fixing of 101.6 mm (4") CI soil single junction Each 723.00
with plug : conforming to IS:1729-1979 with cement
caulked joints and fixing
106 TBSP-C.II-09 Supplying and fixing of 152.4 mm (6") CI soil single junction Each 1,714.00
with plug : conforming to IS:1729-1979 with cement
135
SS RATE
Sl.
No
17
1 2 3 4 5
107 TBSP-C.II-10 Supplying and fixing of 75 mm nominal size (3") CI soil plain Each 388.00
single junction : conforming to IS:1729-1979 with cement
108 TBSP-C.II-11 Supplying and fixing of 101.6 mm (4") CI soil plain single Each 531.00
junction : conforming to IS:1729-1979 with cement caulked
joints and fixing
109 TBSP-C.II-12 Supplying and fixing of 152.4 mm (6") CI soil plain single Each 1,276.00
joints and fixing
110 TBSP-C.II-13 Supplying and Fixing of 75 mm nominal size (3") CI soil Each 704.00
Double junction with plug : conforming to IS:1729-1979
with cement caulked joints and fixing
111 TBSP-C.II-14 Supplying and Fixing of 101.6 mm (4") CI soil Double Each 855.00
junction with plug : conforming to IS:1729-1979 with
112 TBSP-C.II-15 Supplying and Fixing of 152.4 mm (6") CI soil Double Each 1,999.00
junction with plug : conforming to IS:1729-1979 with
113 TBSP-C.II-16 Supplying and Fixing of 75 mm nominal size (3") CI soil Each 608.00
plain Double junction : conforming to IS:1729-1979 with
114 TBSP-C.II-17 Supplying and Fixing of 101.6 mm (4") CI soil plain Double Each 799.00
joints and fixing
115 TBSP-C.II-18 Supplying and Fixing of 152.4 mm (6") CI soil plain Double Each 1,872.00
joints and fixing
116 TBSP-C.II-19 Supplying and Fixing of 75mm C.I. Offsets Ist quality Each 298.00
fixing -for 76.20 mm (3") C.I. Pipe
119 TBSP-C.II-22 Supplying and Fixing of 115 mm C.I. Offsets Ist quality Each 355.00
fixing - for 76.20 mm (3") C.I. Pipe
fixing for 76.20 mm (3") C.I. Pipe
136
SS RATE
Sl.
No
17
1 2 3 4 5
124 TBSP-C.II-27 Supplying and Fixing of 150 mm C.I. Offsets Ist quality Each 1,082.00
125 TBSP-C.II-28 Supplying & fixing CI floor traps 1st quality ISI marked Each 539.00
conforming to IS:1729-1979 with C.P. Grating fixing with
white cement as per site requirements with standard
practice for nominal dia 75 mm (3") and grating size 165
mm dia of weight not less than 5.5 Kgs
126 TBSP-C.II-29 Supplying & fixing CI floor traps 1st quality ISI marked with Each 660.00
C.P. Grating fixing with white cement as per site
requirements with standard practice for nominal dia 100
mm (4") and grating size 100 mm dia of weight not less than
6 Kgs
127 TBSP-C.II-30 Supplying & fixing CI floor traps 1st quality ISI marked Each 329.00
conforming to IS:1729-1979 with C.P. Grating fixing with
white cement as per site requirements with standard
practice for nominal dia 75 mm (3") and grating size 100
mm dia of weight not less than 4.0 Kgs
128 TBSP-C.II-31 Supplying & fixing CI Collars (double socket) Ist quality ISI Each 181.00
practice for 76.20 mm (3") C.I. Pipe
III SUB-SECTION LABOUR CHARGES FOR CI PIPE WORKS

131 TBSP-C.III-01 Labour charges only for fixing of C.I. Single/ Double Socket 1 RM 230.00
soil pipes of any dia with cement caulked joints and fixing as
per site requirements including painting black with Japan
paint and fixing with necessary wooden blocks fixed in the
masonry walls in cement mortar and including fixing of M.S.
clamps if necessary with required nails
132 TBSP-C.III-02 Labour charges only for fixing CI Plain/ Plug (Door) bends Each 73.00
with cement caulked joints and fixing as per site
requirements with standard practice
137
SS RATE
Sl.
No
17
1 2 3 4 5
133 TBSP-C.III-03 Labour charges only fixing CI soil single junctions with Each 92.00
cement caulked joints and fixing as per site requirements
with standard practice
134 TBSP-C.III-04 Labour charges only fixing CI soil Double junctions with Each 99.00
cement caulked joints and fixing as per site requirements
with standard practice
135 TBSP-C.III-05 Labour charges only fixing CI soil Collars, Bends, Offsets etc., Each 46.00
with cement caulked joints and fixing as per site
136 TBSP-C.III-06 Labour charges only for fixing CI Nahany/ Floor traps with Each 60.00
C.P. Grating fixing with white cement as per site
137 TBSP-C.III-07 Boxing of Nahany traps in RCC floors Each 194.00
138 TBSP-C.III-08 Boxing of W.C Traps in R.C.C floors Each 389.00
D SECTION CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS:
3989 - 1984
I SUB-SECTION SUPPLY OF CENTRIFUGAL CI PIPES
139 TBSP-D.I-01 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1,500.00
Double socket
Double socket
144 TBSP-D.I-06 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1,349.00
148 TBSP-D.I-10 75 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 982.00
150 TBSP-D.I-12 75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) Each 1,032.00
pipes
151 TBSP-D.I-13 100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) Each 1,281.00
pipes
II SUB-SECTION SUPPLY OF C.I. SPUN FITTINGS
152 TBSP-D.II-01 75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) Each 358.00
fittings
153 TBSP-D.II-02 100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) Each 411.00
fittings
154 TBSP-D.II-03 75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) Each 513.00
fittings
155 TBSP-D.II-04 100 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) Each 589.00
fittings
156 TBSP-D.II-05 150 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) Each 1,125.00
fittings
138
SS RATE
Sl.
No
17
1 2 3 4 5
157 TBSP-D.II-06 75 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) Each 707.00
fittings
158 TBSP-D.II-07 100 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) Each 781.00
fittings
159 TBSP-D.II-08 150 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) Each 1,409.00
fittings
fittings
fittings
162 TBSP-D.II-11 75 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI Each 1,193.00
(Spun) fittings
163 TBSP-D.II-12 100 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI Each 1,785.00
(Spun) fittings
164 TBSP-D.II-13 75 mm dia Plain Bend - CI (Spun) fittings Each 368.00
165 TBSP-D.II-14 100 mm dia Plain Bend - CI (Spun) fittings Each 433.00
166 TBSP-D.II-15 150 mm dia Plain Bend - CI (Spun) fittings Each 1,033.00
167 TBSP-D.II-16 75 mm dia Door Bend - CI (Spun) fittings Each 381.00
168 TBSP-D.II-17 100 mm dia Door Bend - CI (Spun) fittings Each 494.00
169 TBSP-D.II-18 150 mm dia Door Bend - CI (Spun) fittings Each 1,130.00
170 TBSP-D.II-19 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 368.00
171 TBSP-D.II-20 100 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 433.00
172 TBSP-D.II-21 150 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 1,033.00
173 TBSP-D.II-22 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 381.00
174 TBSP-D.II-23 100 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 494.00
175 TBSP-D.II-24 150 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 1,130.00
176 TBSP-D.II-25 Horn Bend Plain 101.6 x 50 mm nominal size (4" x 2") 100 Each 750.00
mm dia - CI (Spun) fittings
177 TBSP-D.II-26 Horn Bend door 101.6 x 50 mm nominal size (4" x 2") 100 Each 875.00
mm dia - CI (Spun) fittings
178 TBSP-D.II-27 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 392.00
179 TBSP-D.II-28 100 mm dia Heel Rest Bend - CI (Spun) fittings Each 501.00
180 TBSP-D.II-29 150 mm dia Heel Rest Bend - CI (Spun) fittings Each 1,065.00
181 TBSP-D.II-30 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 494.00
182 TBSP-D.II-31 100 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 666.00
183 TBSP-D.II-32 150 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 1,375.00
184 TBSP-D.II-33 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 582.00
185 TBSP-D.II-34 100 mm dia Single Branch Door "T" - CI (Spun) fittings Each 773.00
186 TBSP-D.II-35 150 mm dia Single Branch Door "T" - CI (Spun) fittings Each 1,452.00
187 TBSP-D.II-36 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 582.00
188 TBSP-D.II-37 100 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 773.00
189 TBSP-D.II-38 150 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 1,704.00
190 TBSP-D.II-39 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 638.00
139
SS RATE
Sl.
No
17
1 2 3 4 5
191 TBSP-D.II-40 100 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 853.00
192 TBSP-D.II-41 150 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 1,836.00
193 TBSP-D.II-42 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 675.00
194 TBSP-D.II-43 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 908.00
195 TBSP-D.II-44 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 752.00
196 TBSP-D.II-45 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 947.00
197 TBSP-D.II-46 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 752.00
198 TBSP-D.II-47 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 947.00
199 TBSP-D.II-48 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 793.00
200 TBSP-D.II-49 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 1,028.00
201 TBSP-D.II-50 75 mm dia Shoe Bend - CI (Spun) fittings Each 465.00

202 TBSP-D.II-51 100 mm dia Shoe Bend - CI (Spun) fittings Each 544.00
203 TBSP-D.II-52 150 mm dia Shoe Bend - CI (Spun) fittings Each 1,105.00
204 TBSP-D.II-53 75 mm dia Collar - CI (Spun) fittings Each 318.00
207 TBSP-D.II-56 75 mm dia Cowl - CI (Spun) fittings Each 281.00
210 TBSP-D.II-59 75 mm dia Offset 3" (75 mm nominal size ) projection - CI Each 407.00
(Spun) fittings
(Spun) fittings
(Spun) fittings
213 TBSP-D.II-62 75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) Each 445.00
fittings
214 TBSP-D.II-63 100 mm dia Offset 6" (152.4mm ) projection - CI (Spun) Each 582.00
fittings
215 TBSP-D.II-64 150 mm dia Offset 6" (152.4mm ) projection - CI (Spun) Each 1,161.00
fittings
216 TBSP-D.II-65 75 mm dia Long Door Bend - CI (Spun) fittings Each 936.00
217 TBSP-D.II-66 100 mm dia Long Door Bend - CI (Spun) fittings Each 1,007.00
218 TBSP-D.II-67 75 mm dia Hand Hole pipe ( Inspection pipe) Each 538.00
221 TBSP-D.II-70 75 mm dia P Traps - CI (Spun) fittings Each 582.00
222 TBSP-D.II-71 100 mm dia P Traps - CI (Spun) fittings Each 798.00
140
SS RATE
Sl.
No
17
1 2 3 4 5
223 TBSP-D.II-72 4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI Each 915.00
(Spun) fittings
224 TBSP-D.II-73 4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI Each 915.00
(Spun) fittings
225 TBSP-D.II-74 4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI Each 568.00
(Spun) fittings
226 TBSP-D.II-75 6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI Each 778.00
(Spun) fittings
227 TBSP-D.II-76 3" x 2" ( 75 mm nominal size x 50 mm nominal size ) plain T Each 486.00
75 mm dia - CI (Spun) fittings
228 TBSP-D.II-77 3" x 2" ( 75 mm nominal size x 50 mm nominal size ) Door T Each 758.00
229 TBSP-D.II-78 3" x 2" ( 75 mm nominal size x 50 mm nominal size ) Plain Y Each 758.00
230 TBSP-D.II-79 3" x 2" ( 75 mm nominal size x 50 mm nominal size ) Door Y Each 758.00
231 TBSP-D.II-80 4" x 3" (101.6 mm x 76.2mm ) Plain T 75 mm dia - CI Each 758.00
(Spun) fittings
232 TBSP-D.II-81 4" x 3" (101.6 mm x 76.2mm ) Door T 75 mm dia - CI (Spun) Each 803.00
fittings
233 TBSP-D.II-82 4" x 3" (101.6 mm x 76.2mm ) Plain Y 75 mm dia - CI (Spun) Each 803.00
fittings
234 TBSP-D.II-83 4" x 3" (101.6 mm x 76.2mm ) Door Y 75 mm dia - CI Each 857.00
(Spun) fittings
235 TBSP-D.II-84 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI Each 1,122.00
(Spun) fittings
236 TBSP-D.II-85 6" x 4" (152.4 mm x101.6 mm ) Door T 75 mm dia - CI Each 1,216.00
(Spun) fittings
237 TBSP-D.II-86 6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI Each 1,286.00
(Spun) fittings
238 TBSP-D.II-87 6" x 4" (152.4 mm x101.6 mm ) Door Y 75 mm dia - CI Each 1,572.00
(Spun) fittings
239 TBSP-D.II-88 75 mm dia Plain " T" 27 " (685.8 mm ) Special Types of Each 1,629.00
Long Fittings
240 TBSP-D.II-89 100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of Each 2,288.00
Long CI (Spun) fittings
241 TBSP-D.II-90 75 mm dia Door "T" 27" (685.8 mm ) Special Types of Long Each 1,819.00
CI (Spun) fittings
242 TBSP-D.II-91 100mm dia Door "T" 27" (685.8 mm ) Special Types of Long Each 2,514.00
CI (Spun) fittings
243 TBSP-D.II-92 75 mm dia Plain " Y" 27" (685.8 mm) Special Types of Long Each 1,819.00
CI (Spun) fittings
244 TBSP-D.II-93 100mm dia Plain " Y" 27" (685.8 mm) Special Types of Long Each 2,514.00
CI (Spun) fittings
245 TBSP-D.II-94 75 mm dia Door " Y" 27" (685.8 mm) Special Types of Long Each 2,028.00
CI (Spun) fittings
246 TBSP-D.II-95 100mm dia Door " Y" 27" (685.8 mm) Special Types of Long Each 2,760.00
CI (Spun) fittings
141
SS RATE
Sl.
No
17
1 2 3 4 5
E SECTION VITREOUS CHINAWARE - SANITARY APPLIANCES as per
IS:2556 - 2004 (Materials shall be procured from the
list of approved Brands/ Manufacturers/ Suppliers)
I SUB-SECTION INDIAN WATER CLOSETS

247 TBSP-E.I-01 Supplying & fixing approved make Indian pattern white Each 953.00
glazed W.C 1st quality ISI marked conforming to IS:2556-
Part-3-2004 with "P" or "S" trap: 580 mm Long
248 TBSP-E.I-02 Supplying & fixing approved make Indian pattern white Each 953.00
glazed W.C 1st quality ISI marked conforming to IS:2556-
Part-3-2004 with "P" or "S" trap: 630 mm Long
249 TBSP-E.I-03 Supplying & fixing approved make Orissa Pan white glazed Each 1,440.00
W.C 1st quality ISI marked conforming to IS:2556-Part-3-
2004 with "P" or "S" trap: 580 mm x 440 mm
250 TBSP-E.I-04 Supplying & fixing approved make Orissa Pan white glazed Each 1,514.00
W.C 1st quality ISI marked conforming to IS:2556-Part-3-
2004 with "P" or "S" trap: 630 mm x 450 mm
251 TBSP-E.I-05 Supplying & fixing approved make porcelain foot rest for Pair 231.00
squatting I.W.C. (Rectangular pair) of sizes 250 mm x 125
mm x 15 mm thick each foot rest 1st quality ISI marked
conforming to IS:2556-Part-10:1974
252 TBSP-E.I-06 Providing Brick masonry seat for Orissa pan/ Indian W.C. Each 298.00
using traditional common burnt clay bricks as per standard
practice
253 TBSP-E.I-07 Providing Cement Concrete Squatting plate for Orissa pan/ Each 89.00
Indian W.C. in P.C.C. 1:2:4 as per standard practice
II SUB-SECTION FLOOR MOUNTED EWC

254 TBSP-E.II-01 Supplying and fixing approved make wash down European Each 1,691.00
Water Closet of 1st quality conforming to IS:2556-Part-2-
2004 of white glazed with 'P' trap
255 TBSP-E.II-02 Supplying and fixing approved make wash down European Each 1,785.00
Water Closet of 1st quality conforming to IS:2556-Part-2-
2004 of white glazed with 'S' trap
256 TBSP-E.II-03 upply, Installation and commissioning approved make floor Each 6,000.00
mounted anglo indian wash down EWC conforming to
IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush
porcelain cistern fixed on wash down EWC with all internal
parts of dual flush cistern, ultra solid seat cover of approved
make with rubber buffer and cap & 15 mm angle stop cock
& 450 mm long PVC inter connection pipe wall flanges all of
approved make etc. complete for finished item of work in all
respects: White Colour
142
SS RATE
Sl.
No
17
1 2 3 4 5
257 TBSP-E.II-04 Supply, Installation and commissioning approved make Each 8,808.00
floor mounted Close Coupled wash down EWC conforming
to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual
flush porcelain cistern fixed on wash down EWC with all
internal parts of dual flush cistern, ultra solid seat cover of
approved make with rubber buffer and cap & 15 mm angle
stop cock & 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item
of work in all respects: White Colour
to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual
flush porcelain cistern fixed on wash down EWC with all
internal parts of dual flush cistern, ultra solid seat cover of
approved make with rubber buffer and cap & 15 mm angle
stop cock & 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item
of work in all respects: Coloured - Grade - I/ Grade - II
to IS:2556 (Part 8)-2004 with 'P' or 'S' trap with dual flush
porcelain cistern fixed on wash down EWC with all internal
parts of dual flush cistern, ultra solid seat cover of approved
make with rubber buffer and cap & 15 mm angle stop cock
& 450 mm long PVC inter connection pipe wall flanges all of
approved make etc. complete for finished item of work in all
respects: Special Colour - Grade - III
III SUB-SECTION WALL MOUNTED EWC

260 TBSP-E.III-01 Supply, Installation and commissioning approved make Each 9,350.00
wash down wall mounted EWC conforming to IS:2556 (Part
16)-2002 with 'P' or 'S' trap with concealed flush cistern
fixed in wall with all internal parts of dual flush cistern,
ultra solid seat cover of approved make with rubber buffer
and cap all of approved make etc. complete for finished item
of work in all respects: White colour
of work in all respects: Coloured Grade-I & II
143
SS RATE
Sl.
No
17
1 2 3 4 5
of work in all respects: Special Coloured Grade-III
IV SUB-SECTION CISTERNS FOR WATER CLOSETS

263 TBSP-E.IV-01 Supplying & Fixing low down porcelain flushing tank with Each 2,304.00
lid 10 Lit Capacity with internal components
264 TBSP-E.IV-02 Supplying & Fixing internal cistern fittings for dual flush Each 1,590.00
cisterns
265 TBSP-E.IV-03 Supplying & Fixing ultra slim concealed flushing cistern of Each 3,580.00
HDPE body and of size 460 x 450 x 80 mm with internal
component for wall mounted Wash down WC
V SUB-SECTION PLASTIC SEATS FOR WATER CLOSETS

266 TBSP-E.V-01 Supplying and Fixing best Indian make plastic seat and lid Each 810.00
for European water closets with rubber or plastic Buffers as
per IS 2548-1996
267 TBSP-E.V-02 Supplying and Fixing best Indian make plastic soft closing Each 1,610.00
seat and lid for European water closets with rubber or
plastic Buffers as per IS 2548-1996
VI SUB-SECTION WASH HAND BASINS
268 TBSP-E.VI-01 Supplying & Fixing Indian make Flat Back Wash Hand Basin Each 2,466.00
1st quality conforming to IS:2556-Part-4:1972 with waste
fittings like rubber plug, chain, 32 mm nominal size C.P.
Fitting with parallel pipe thread conforming to IS:2963-
1979 and fitted with 15 mm nominal bore Chromium Plated
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 660 x 460 mm - Single
C.P. Pillar cock
C.P. Pillar cock
144
SS RATE
Sl.
No
17
1 2 3 4 5
brackets including wooden block: 630 x 450 mm - Double
C.P. Pillar cock
C.P. Pillar cock
C.P. Pillar cock
C.P. Pillar cock
C.P. Pillar cock
145
SS RATE
Sl.
No
17
1 2 3 4 5
275 TBSP-E.VI-08 Supplying & Fixing Indian make below counter Wash Hand Each 3,850.00
Basin 1st quality with waste fittings like rubber plug, chain,
32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal
bore Chromium Plated Pillar Tap of 1st quality Indian make
400 grams Seiko/ Senior/ Nice/ Esso or equivalent
complete with standard CI brackets including wooden block
with single CP pillar cock
276 TBSP-E.VI-09 Supplying & Fixing Indian make white glazed vitreous china Each 4,508.00
porcelain sink conforming to IS:2556-Part-5-1994 on
cantilever brackets with waste fittings like rubber plug,
chain, 32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 600 x 400 x 250
277 TBSP-E.VI-10 Supplying & Fixing Indian make white glazed vitreous china Each 5,072.00
porcelain sink conforming to IS:2556-Part-5-1994 on
cantilever brackets with waste fittings like rubber plug,
chain, 32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 750 x 450 x 250
278 TBSP-E.VI-11 Supplying & fixing oval shape basin white (520x410mm) Each 2,481.00
parry or equivalent
279 TBSP-E.VI-12 Supplying and Fixing Pedestal for Wash Hand Basin Each 1,142.00
280 TBSP-E.VI-13 Supplying & fixing stainless steel sink size 36" x 18" Each 6,865.00
(914.4x457.2mm) 1 mm thick with accessories
281 TBSP-E.VI-14 Supplying & fixing SINGLE BOWL stainless steel sink size Each 5,412.00
24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with
accessories
282 TBSP-E.VI-15 Supplying & fixing stainless steel sink size 20" x18" x 8 " Each 4,905.00
(508x457.2x203.2mm) 1 mm thick with accessories
283 TBSP-E.VI-16 S & F 609.6 x 457.2 x 254 mm RCC terrazzo finished sink Each 719.00
(or constructed at site with 50.8mm thick) brass plug and
chain including CI cantilever brackets
VII SUB-SECTION URINALS
284 TBSP-E.VII-01 Supplying & Fixing white glazed flat back Bowl urinals of Each 845.00
size 440 mm x 265 mm x 315 mm with internal flushing rim
fixed with screws complete Indian make conforming to
IS:2556-1995
285 TBSP-E.VII-02 Supplying & Fixing white glazed flat back half stall urinals Each 2,536.00
1st quality conforming to IS:2556-1995 with standard C.P.
Spreader fixed with screws complete Indian make : 410 x
265 x 305 mm
286 TBSP-E.VII-03 Supplying & Fixing white glazed flat back half stall urinals Each 2,818.00
1st quality conforming to IS:2556-1995 with standard C.P.
Spreader fixed with screws complete Indian make : 590 x
375 x 390 mm
146
SS RATE
Sl.
No
17
1 2 3 4 5
287 TBSP-E.VII-04 Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed Each 495.00
porcelain channel fixed in brick masonry white cement
pointing.
VIII SUB-SECTION LABOUR CHARGES FOR SANITARY WARE
288 TBSP-E.VIII- Labour charges only for fixing Indian pattern W.C with "P" Each 307.00
01 or "S" trap
289 TBSP-E.VIII- Labour charges only Fixing Orissa pan W.C with "P" or "S" Each 383.00
02 trap
290 TBSP-E.VIII- Labour charges only for fixing porcelain foot rest for Pair 70.00
03 squatting I.W.C. (Rectangular pair)
291 TBSP-E.VIII- Labour charges only for fixing low down porcelain flushing Each 536.00
04 tank with internal components
292 TBSP-E.VIII- Labour charges only for fixing internal cistern fittings of any Each 267.00
05 flushing tank
293 TBSP-E.VIII- Labour charges only for fixing European Water Closet with Each 269.00
06 'P' or 'S' trap as per standard practice
294 TBSP-E.VIII- Labour charges only for fixing plastic seat and lid for Each 78.00
07 European water closet
295 TBSP-E.VIII- Labour charges only for fixing Indian make Flat Back Wash Each 383.00
08 Hand Basin with waste fittings like rubber plug, chain, 32
mm nominal size C.P. Fitting Pillar Taps complete with
standard CI brackets including wooden block
296 TBSP-E.VIII- Labour charges only for fixing pedestal for wash hand basin Each 139.00
09
297 TBSP-E.VIII- Labour charges only for fixing bottle trap to the wash hand Each 53.00
10 basin
298 TBSP-E.VIII- Labour charges only Fixing flat back Bowl/ Half stall urinals Each 153.00
11 with fixing C.P. Spreader and screws complete
299 TBSP-E.VIII- Labour charges only for fixing Vitreous china porcelain Each 383.00
12 sinks with waste fittings, rubber plug, chain, cantilever
brackets etc.
F SECTION CP FITTINGS (Materials shall be procured from the list
of approved Brands/ Manufacturers/ Suppliers)
I SUB-SECTION TAPS & FAUCETS - BIB TAPS

300 TBSP-F.I-01 S&F of 15 mm brass body CP finish bib tap of not less than Each 245.00
300 grams weight screw type (full turn) with internal /
external threaded conenction conforming to IS 8931
301 TBSP-F.I-02 S&F of 15 mm brass body CP finish bib tap of not less than Each 599.00
300 grams weight with quarter turn spindle with either
internal or external threaded conenction conforming to IS
8931
302 TBSP-F.I-03 S&F of 15 mm brass body premium variety Chromium Each 850.00
Plated finish bib tap with wall flange of not less than 500
grams weight with quarter turn spindle with either internal
or external threaded conenction conforming to IS 8931 and
with 10 years warranty
147
SS RATE
Sl.
No
17
1 2 3 4 5
303 TBSP-F.I-04 S&F of 15 mm brass body premium variety Chromium Each 1,200.00
Plated finish bib tap angular shape with wall flange of not
less than 500 grams weight with quarter turn spindle with
either internal or external threaded conenction conforming
to IS 8931 and with 10 years warranty
304 TBSP-F.I-05 S&F of 15 mm brass body CP finish two way bib tap of not Each 855.00
less than 400 grams weight with quarter turn spindle
internal/ external threaded connection conforming to IS
8931
305 TBSP-F.I-06 S&F of 15 mm brass body premium variety Chromium Each 1,100.00
Plated finish two way bib tap with flange of not less than
500 grams weight with quarter turn spindle internal/
external threaded connection conforming to IS 8931 and
306 TBSP-F.I-07 S&F of Chromium plated finish brass body quarter turn Each 3,213.00
Bibcock cum Health Faucet with 1m long tube and wall hook
307 TBSP-F.I-08 S&F of 15 mm brass body CP finish long body bib tap of not Each 765.00
less than 400 grams weight with quarter turn spindle
internal / external threaded connection conforming to IS
8931
II SUB-SECTION TAPS & FAUCETS - PILLAR TAPS
308 TBSP-F.II-01 S&F of 15 mm brass body CP finish pillar tap of not less than Each 626.00
300 grams weight screw type (full turn) conforming to IS
8931
309 TBSP-F.II-02 S&F of 15 mm brass body CP finish pillar tap of not less than Each 810.00
500 grams weight quarter turn spindle conforming to IS
8931
310 TBSP-F.II-03 S&F of 15 mm brass body Premium variety Chromium Each 825.00
plated finish pillar cock with areator of not less than 500
grams weight quarter turn spindle conforming to IS 8931
and with a warranty of 10 years
311 TBSP-F.II-04 S&F of 15 mm brass body Premium variety Chromium Each 1,100.00
plated finish long neck pillar cock with areator of not less
than 500 grams weight quarter turn spindle conforming to
IS 8931 and with a warranty of 10 years
312 TBSP-F.II-05 S&F of 15 mm brass body Premium variety Chromium Each 1,200.00
plated finish single lever pillar cock with areator of not less
than 500 grams weight quarter turn spindle conforming to
IS 8931 and with a warranty of 10 years
313 TBSP-F.II-06 S&F premium make Sensotronic sensor faucet for wash Each 14,532.00
basin, and with 10 years warranty
314 TBSP-F.II-07 S&F premium make Sensotronic concealed type flushing Each 14,532.00
valve for urinal complete set with installation box with
control cock, and with 10 years warranty
148
SS RATE
Sl.
No
17
1 2 3 4 5
315 TBSP-F.II-08 S&F premium make Auto closing system pillar cock for Each 2,408.00
wash basin, and with 10 years warranty
316 TBSP-F.II-09 S&F premium make Auto Closing system Bibcock, and with Each 2,526.00
10 years warranty
III SUB-SECTION TAPS & FAUCETS - OTHER TAPS & SPOUTS
317 TBSP-F.III-01 S&F of 15 mm brass body CP finish self closing tap push Each 271.00
type conforming to IS 1711
318 TBSP-F.III-02 S&F of 15 mm brass body CP finish self closing tap lift type Each 237.00
319 TBSP-F.III-03 S&F of 15 mm brass body Premium variety Chromium Each 1,600.00
plated finish Swan neck tap with right/left hand operating
knob with areator of not less than 500 grams weight
quarter turn spindle conforming to IS 8931 and with a
warranty of 10 years
320 TBSP-F.III-04 S&F of 15 mm brass body CP finish wall mounted sink spout Each 2,300.00
with connecting legs & wall flanges swinging nozzle
conforming to IS 8931 and with a warranty of 10 years
321 TBSP-F.III-05 S&F of 15 mm brass body CP finish wall mounted sink Each 1,400.00
spout with connecting legs & wall flanges fixed nozzle
conforming to IS 8931 and with a warranty of 10 years
322 TBSP-F.III-06 S&F of 15 mm bath tub spout minimum 180 mm projection Each 1,305.00
with divertor system
323 TBSP-F.III-07 S&F of 15 mm bath tub spout with tip ton minimum 180 Each 1,755.00
mm projection with divertor system
IV SUB-SECTION STOP & ANGLE VALVES
324 TBSP-F.IV-01 S & F 15 mm nominal size CP finish brass stop valve screw Each 231.00
type with internal /external threaded conforming to IS 8931
325 TBSP-F.IV-02 S & F 15 mm nominal size brass concealed stop valve screw Each 247.00
type with internal /external threaded conforming to IS 8931
326 TBSP-F.IV-03 S & F 15 mm nominal size CP finish brass angled stop valve Each 236.00
screw type with internal /external threaded conforming to
IS 8931
327 TBSP-F.IV-04 S&F of 15 mm CP finish brass stop valve of not less than 400 Each 783.00
grams weight quarter turn spindle with internal threaded
328 TBSP-F.IV-05 S&F of 15 mm CP finish brass concealed stop valve of not Each 607.00
less than 400 grams weight quarter turn spindle conforming
to IS 8931
329 TBSP-F.IV-06 S&F of 15 mm CP finish brass concealed stop valve of not Each 950.00
less than 400 grams weight with addjustable wall flange
and quarter turn spindle conforming to IS 8931 and with 10
years warranty
330 TBSP-F.IV-07 S&F of 15 mm brass angle stop valve of quarter turn spindle Each 607.00
type of not less than 400 grams weight with internal
threaded conforming to IS 8931
V SUB-SECTION COMBINATION FAUCETS
149
SS RATE
Sl.
No
17
1 2 3 4 5
330 TBSP-F.V-01 S&F of 15 mm CP finish brass body wall mixer with hand Each 2,786.00
shower with center distance 150 mm conforming to IS 8931
331 TBSP-F.V-02 S&F of 15 mm CP finish brass body wall mixer conforming Each 2,147.00
to IS 8931 with center distance 150 mm conforming to IS
8931
332 TBSP-F.V-03 S&F of 15 mm premium variety Chromium plated finish Each 3,650.00
brass body wall mixer with hand shower with a provision
for over head shower with 115 mm long bend pipe on upper
side, connecting legs & wall flanges conforming to IS 8931
333 TBSP-F.V-04 S&F of 15 mm brass forged body concealed diverter with Each 3,380.00
regular flow
334 TBSP-F.V-05 S&F of 15 mm brass forged body concealed diverter with Each 4,383.00
high flow
335 TBSP-F.V-06 S&F of 15 mm brass forged body concealed diverter forged Each 4,203.00
body with 3 way in let
336 TBSP-F.V-07 S&F of 15 mm central hole Chromium plated finish brass Each 2,741.00
body basin mixer 450 mm long pipe for hot & cold water
mixing conforming to IS 8931 and with 10 years warranty
body single lever basin mixer 450 mm long breaded pipe for
hot & cold water mixing conforming to IS 8931 and with 10
years warranty
body sink mixer with swinging cascade round shape spout
(wall/ table mounted model) with connecting legs & wall
flanges conforming to IS 8931 and with 10 years warranty
VI SUB-SECTION SHOWER ROSES & FITTINGS

339 TBSP-F.VI-01 S&F 15 mm nominal size 152.0 mm CP finish iron body Each 186.00
shower rose
shower rose
shower rose
342 TBSP-F.VI-04 S&F 15 mm nominal size CP finish shower rose 200 mm dia Each 576.00
with CP finish flexible pipe
343 TBSP-F.VI-05 S&F 15 mm nominal size CP finish brass over head shower Each 1,233.00
arm of 450 mm long with 90 degree bend & wall flange
suitable for rain shower
344 TBSP-F.VI-06 S&F 15 mm nominal size Chromium plated finish brass Each 1,500.00
over head shower arm of 450 mm long with 90 degree bend
& wall flange suitable for rain shower and with 10 years
warranty
345 TBSP-F.VI-07 S&F 15 mm nominal size over head 5 flow round massage Each 873.00
shower rose
150
SS RATE
Sl.
No
17
1 2 3 4 5
346 TBSP-F.VI-08 S&F 15 mm nominal size 5 flow hand shower with rubbit Each 1,800.00
cleaning system and 1.5 m long flexible hose and wall hook.
VII SUB-SECTION MISCELLANEOUS CP FITTINGS

347 TBSP-F.VII-01 S&F of 15 mm Stainless steel flexible hose 1.0 m long for Each 256.00
hand shower / health faucet with brass nuts
348 TBSP-F.VII-02 S&F of 15 mm CP finish brass body health faucet gun Each 210.00
349 TBSP-F.VII-03 S&F CP finish brass bottle trap 250 mm long with wall Each 950.00
connection pipe & wall Flange
350 TBSP-F.VII-04 S&F CP finish brass bottle trap 190mm long with wall Each 954.00
connection pipe & wall Flange
351 TBSP-F.VII-05 S&F PVC bottle trap with wall connection pipe Each 142.00
352 TBSP-F.VII-06 S&F CP finish brass body 32 mm dia nominal size waste Each 234.00
coupling with half/full thread & brass check nut conforming
to IS 2963: 1979
coupling with half/ full thread & brass body check nut and
chain & plug conforming to IS 2963: 1979
coupling doom type with half/ full thread & brass body
check nut conforming to IS 2963: 1979
355 TBSP-F.VII-09 S&F brass body CP spreader for urinals Each 156.00
356 TBSP-F.VII-10 S&F CP finish steel towel rod of 600 mm long and 20 mm dia Each 396.00
with brackets
357 TBSP-F.VII-11 S&F CP finish brass towel rod 600 mm long and 20 mm dia Each 1,071.00
with brackets
358 TBSP-F.VII-12 S&F of Towel rod 24 " premium make powder coated Each 3,240.00
stainless steel body with 10 years warranty
359 TBSP-F.VII-13 S&F CP finish brass wall mounted towel ring Each 617.00
360 TBSP-F.VII-14 S&F of Chromium plated finish stainless steel body Towel Each 1,004.00
Ring with 10 years warranty
361 TBSP-F.VII-15 S&F of powder coated brass body finish Towel ring Each 2,073.00
premium make with 10 years warranty
362 TBSP-F.VII-16 S&F of Chromium plated finish stainless steel body towel Each 1,621.00
rail 24'' with 10 years warranty
363 TBSP-F.VII-17 S&F powder coated stainless steel body wall mounted Each 3,402.00
towel rack 600 mm long
364 TBSP-F.VII-18 S&F CP finish brass metal body single coat hook Each 405.00
365 TBSP-F.VII-19 S&F CP finish brass robe hook Each 315.00
366 TBSP-F.VII-20 Supply & Fixing Double coat hook with 10 years warranty Each 750.00
367 TBSP-F.VII-21 S&F CP finish brass soap dish Each 567.00

368 TBSP-F.VII-22 S&F Stainless steel liquid soap container wall mounted and Each 450.00
bottle type
369 TBSP-F.VII-23 S&F premium make wall mirror with provision for over Each 5,509.00
head shower and 115 mm long bend pipe with wall flange
and with 10 years warranty
151
SS RATE
Sl.
No
17
1 2 3 4 5
370 TBSP-F.VII-24 S&F premium make wall mirror with provision for over Each 8,666.00
head shower and 115 mm long bend pipe with wall flange
powder coated with 10 years warranty
371 TBSP-F.VII-25 S&F of Chromium plated finish stainless steel body Toilet Each 873.00
paper holder with 10 years warranty
372 TBSP-F.VII-26 S&F Stainless steel 4" dia round Grating with frame for Each 63.00
nahany or floor trap cover with or without hole
373 TBSP-F.VII-27 S&F Stainless steel 5" square Grating with frame for Each 76.00
nahany or floor trap cover with or without hole
374 TBSP-F.VII-28 S&F Stainless steel 4" dia round Grating for nahany or floor Each 165.00
trap cover with cockroach trap with or without hole
375 TBSP-F.VII-29 S&F Stainless steel 5" square Grating for nahany or floor Each 172.00
trap cover with cockroach trap with or without hole
376 TBSP-F.VII-30 S&F brass body plumber union of size 31.75 mm dia with Each 69.00
check nut
377 TBSP-F.VII-31 S&F brass body plumber union of size 38.1 mm dia with Each 75.00
check nut
378 TBSP-F.VII-32 S&F 4" dia CP thimble pipe: 150 mm long Each 413.00
381 TBSP-F.VII-35 S&F CP long bend Each 349.00
382 TBSP-F.VII-36 S&F CP short bend Each 175.00
383 TBSP-F.VII-37 Supply & fixing of LLC handle set 1st quality Each 79.00
384 TBSP-F.VII-38 S&F premium make copper pipe 450 mm long with nuts & Each 419.00
washers with 10 years warranty
385 TBSP-F.VII-39 S&F premium make copper pipe 450 mm long with nuts & Each 811.00
washers power colour coated and with 10 years warranty
386 TBSP-F.VII-40 S&F of Chromium plated finish stainless steel body Tumbler Each 1,093.00
holder with 10 years warranty
387 TBSP-F.VII-41 S&F of Chromium plated finish stainless steel body Glass Each 2,149.00
shelf 22'' with 10 years warranty
VIII SUB-SECTION LABOUR CHARGES
388 TBSP-F.VIII-01 Labour charges for fixing all types of CP Taps & faucets Each 48.00
389 TBSP-F.VIII-02 Labour charges for fixing all types of CP Stop & Angle Valves Each 93.00
390 TBSP-F.VIII-03 Labour charges for fixing all types of wall combination taps, Each 164.00
mixers & diverters
391 TBSP-F.VIII-04 Labour charges for fixing all types of miscellaneous CP Each 93.00
fittings
392 TBSP-F.VIII-05 Mechanical Cleaning of water sumps with pumps & UV 1000 27.00
disinfecting
G SECTION G.I. PIPES & FITTINGS (Materials shall be procured
from the list of approved Brands/ Manufacturers/
Suppliers)
I SUB-SECTION G.I. PIPES
152
SS RATE
Sl.
No
17
1 2 3 4 5
393 TBSP-G.I-01 S& F 15 mm Nominal Bore GI pipe Light Grade properties & 1 RM 167.00
weight as per IS 1239 ISI mark with GI fittings including the
cost of pipe & its fittings & labour charges complete
399 TBSP-G.I-07 S& F 15 mm Nominal Bore GI pipe Medium Grade 1 RM 185.00

properties & weight as per IS 1239 ISI mark with GI fittings
including the cost of pipe & its fittings & labour charges
complete
complete
complete
complete
complete
complete
153
SS RATE
Sl.
No
17
1 2 3 4 5
405 TBSP-G.I-13 S & F 65 mm Nominal Bore GI pipe Medium Grade 1 RM 811.00
properties & weight as per IS 1239 with GI fittings such as
elbows tees couplings, nipples, plugs including excavation
for trenches and refilling the trenches complete except for
GI bends union and GI connectors with checkout and socket
Tata or Zenith make or equivalent.
II SUB-SECTION G.I. FITTINGS

406 TBSP-G.II-01 S& F GI union 15 mm nominal sizeIst Quality Each 41.00
411 TBSP-G.II-06 S& F GI union 50 mm nominal size Ist Quality Each 137.00
412 TBSP-G.II-07 S& F GI connector 25 mm nominal sizedia Each 82.00
413 TBSP-G.II-08 S& F 15 mm nominal sizeGI 'T' A class Ist quality Each 50.00
414 TBSP-G.II-09 S& F 30 mm nominal sizedia GI bend Ist quality Each 75.00
415 TBSP-G.II-10 S & F 30 mm nominal sizedia GI 'T' 1st Quality Each 74.00
416 TBSP-G.II-11 S & F 25 mm nominal size copper body float valve with PVC Each 426.00
ball Indian make ISI mark
419 TBSP-G.II-14 Supplying & fixing leather washers for 15 mm nominal Each 1.00
sizebib tap and stop cock
420 TBSP-G.II-15 Supplying & fixing leather washers for 20 mm nominal Each 3.00
sizebib tap and stop cock
421 TBSP-G.II-16 Supplying & Fixing 15 mm nominal sizefibre washers Each 3.00
422 TBSP-G.II-17 Supplying & Fixing 20 mm nominal sizefibre washers Each 3.00
423 TBSP-G.II-18 S & F 15 mm nominal sizeholder bat clamps Each 12.00

427 TBSP-G.II-22 Supplying & fixing 15 mm nominal sizeGI drain pipe with Each 43.00
plug for tanks (Mud valve) including making a hole
III SUB-SECTION BRONZE (COPPER ALLOY) VALVES

430 TBSP-G.III-01 S & F Bronze Gate/ Globe valve as per IS - 778 Class - I, Each 636.00
Indian make heavy type - 15 mm NB Size
154
SS RATE
Sl.
No
17
1 2 3 4 5
431 TBSP-G.III-02 S & F Bronze Gate/ Globe valve as per IS - 778 Class - I, Each 858.00
432 TBSP-G.III-03 S & F Bronze Gate/ Globe valve as per IS - 778 Class - I, Each 1,233.00
438 TBSP-G.III-09 Supplying & fixing Bronze Horizontal Check (Non return) Each 470.00
Valve as per IS-778 I-class heavy duty - 15 mm NB Size
439 TBSP-G.III-10 Supplying & fixing Bronze Horizontal Check (Non return) Each 686.00
440 TBSP-G.III-11 Supplying & fixing Bronze Horizontal Check (Non return) Each 1,073.00
443 TBSP-G.III-14 Supplying & fixing Bronze Vertical Check (Non return) Each 443.00
446 TBSP-G.III-17 Supplying & fixing Bronze Vertical Check (Non return) Each 1,200.00
449 TBSP-G.III-20 S & F Bronze Ball valve with SS Ball and SS Spindle as per Each 207.00
IS - Class - I, Indian make heavy type - 15 mm NB Size
155
SS RATE
Sl.
No
17
1 2 3 4 5
453 TBSP-G.III-24 S & F Bronze Ball valve with SS Ball and SS Spindle as per Each 1,033.00
454 TBSP-G.III-25 S & F Bronze Ball valve with SS Ball and SS Spindle as per Each 1,552.00
455 TBSP-G.III-26 S & F Bronze Compact pressure reducing valve (Screwed) Each 1,348.00
as per IS - Class -I, Indian make heavy type - 15 mm NB Size
456 TBSP-G.III-27 S & F Bronze Compact pressure reducing valve (Screwed) Each 1,716.00
as per IS - Class -I, Indian make heavy type - 20 mm NB Size
IV SUB-SECTION LABOUR CHARGES FOR G.I PLUMBING

457 TBSP-G.IV-01 Taking branch water connection from the existing 25 mm Each 157.00
nominal size GI pipe including cutting threading, etc,
complete with fitting
H SECTION PVC PIPES & FITTINGS (Materials shall be procured
from the list of approved Brands/ Manufacturers/
Suppliers)
I SUB-SECTION PVC PIPES
460 TBSP-H.I-01 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 255.00
461 TBSP-H.I-02 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 405.00
463 TBSP-H.I-04 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 288.00
466 TBSP-H.I-07 75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe - Each 179.00
4 Kg/sq.cm
156
SS RATE
Sl.
No
17
1 2 3 4 5
4 Kg/sq.cm
468 TBSP-H.I-09 110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe Each 344.00
- 4 Kg/sq.cm
469 TBSP-H.I-10 75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe Each 191.00
- 4 Kg/sq.cm
- 4 Kg/sq.cm
471 TBSP-H.I-12 110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR Each 356.00
pipe - 4 Kg/sq.cm
472 TBSP-H.I-13 75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe - Each 132.00
4 Kg/sq.cm
4 Kg/sq.cm
474 TBSP-H.I-15 110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe Each 243.00
- 4 Kg/sq.cm
475 TBSP-H.I-16 75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - Each 111.00
4 Kg/sq.cm
4 Kg/sq.cm
477 TBSP-H.I-18 110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe Each 210.00
- 4 Kg/sq.cm
4 Kg/sq.cm
4 Kg/sq.cm
- 4 Kg/sq.cm
481 TBSP-H.I-22 160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 1,153.00
483 TBSP-H.I-24 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 696.00
6 Kg/sq.cm
6 Kg/sq.cm
490 TBSP-H.I-31 110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe Each 525.00
- 6 Kg/sq.cm
157
SS RATE
Sl.
No
17
1 2 3 4 5
- 6 Kg/sq.cm
- 6 Kg/sq.cm
493 TBSP-H.I-34 110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR Each 567.00
pipe - 6 Kg/sq.cm
6 Kg/sq.cm
6 Kg/sq.cm
496 TBSP-H.I-37 110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe Each 387.00
- 6 Kg/sq.cm
6 Kg/sq.cm
6 Kg/sq.cm
- 6 Kg/sq.cm
6 Kg/sq.cm
6 Kg/sq.cm
- 6 Kg/sq.cm
503 TBSP-H.I-44 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm Each 1,885.00
II SUB-SECTION PVC FITTINGS

504 TBSP-H.II-01 Providing & Placing on Terrace (at all floor levels) 1 Lit 6.00
polyethylene water storage tank with Double layer
approved brand & manufacture with cover and suitable
locking arrangement & making necessary holes for inlet &
outlets and over flow pipes but without fittings & base
support for tanks
505 TBSP-H.II-02 Supply of Plastic storage tank lid with hinges Each 76.00
506 TBSP-H.II-03 Supply & Fixing 75 mm nominal size dia PVC elbow Ist Each 47.00
quality
507 TBSP-H.II-04 Supply & fixing 30 mm nominal sizedia PVC flexible waste Each 26.00
pipe of 914.4 mm length of Ist quality
508 TBSP-H.II-05 Supply & Fixing 40 mm nominal sizedia PVC solid waste Each 89.00
pipe outlet
509 TBSP-H.II-06 Supply & fixing Fancy PVC shelf including all fittings Each 212.00
510 TBSP-H.II-07 Supply & fixing of PVC low level system with internal Each 1,455.00
components & short bend: 10 Litres capacity Single Flush
511 TBSP-H.II-08 Supply & fixing of PVC low level system with internal Each 1,708.00
components & short bend: 10 litres capacity Dual Flush
512 TBSP-H.II-09 Supply & fixing of PVC low level system with internal Each 823.00
components & short bend: 8 Litres capacity single Flush
158
SS RATE
Sl.
No
17
1 2 3 4 5
513 TBSP-H.II-10 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe Each 50.00
fittings
fittings
fittings
516 TBSP-H.II-13 75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe Each 67.00
fittings
fittings
fittings
519 TBSP-H.II-16 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 39.00
522 TBSP-H.II-19 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 67.00
525 TBSP-H.II-22 75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 59.00
528 TBSP-H.II-25 75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 73.00
529 TBSP-H.II-26 90 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 108.00
530 TBSP-H.II-27 110 mm dia - Single Tee with Door - UPVC/SWR Pipe Each 130.00
fittings
531 TBSP-H.II-28 75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 125.00
534 TBSP-H.II-31 75 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 200.00
535 TBSP-H.II-32 90 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 286.00
536 TBSP-H.II-33 110 mm dia - Double Tee with Door - UPVC/SWR Pipe Each 295.00
fittings
537 TBSP-H.II-34 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 74.00
540 TBSP-H.II-37 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 95.00
543 TBSP-H.II-40 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 102.00
159
SS RATE
Sl.
No
17
1 2 3 4 5
546 TBSP-H.II-43 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 132.00
549 TBSP-H.II-46 75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 35.00

552 TBSP-H.II-49 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 59.00
555 TBSP-H.II-52 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 9.00
559 TBSP-H.II-56 40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings - Pipe Clip - Each 11.00
UPVC/SWR Pipe fittings
560 TBSP-H.II-57 50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 14.00
564 TBSP-H.II-61 110 mm - Pipe Clip - UPVC/SWR Pipe fittings Each 18.00
566 TBSP-H.II-63 P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Pipe Each 188.00
fittings
567 TBSP-H.II-64 P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe Each 208.00
fittings
568 TBSP-H.II-65 P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe Each 238.00
fittings
569 TBSP-H.II-66 P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe Each 219.00
fittings
570 TBSP-H.II-67 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings Each 227.00
571 TBSP-H.II-68 Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings Each 330.00
572 TBSP-H.II-69 4" (101.6 mm ) Nahany Trap ( Without Jali with Each 112.00
inlet)UPVC/SWR Pipe fittings
573 TBSP-H.II-70 3" (75 mm nominal size ) Nahany Trap ( without Jali Each 87.00
without inlet)UPVC/SWR Pipe fittings
574 TBSP-H.II-71 4" (101.6 mm ) Nahany Trap ( without inlet with out Each 108.00
Jali)UPVC/SWR Pipe fittings
575 TBSP-H.II-72 Mini Trap - UPVC/SWR Pipe fittings Each 53.00
576 TBSP-H.II-73 3" (75 mm nominal size ) Nahany Trap with Jali - Each 102.00
UPVC/SWR Pipe fittings
577 TBSP-H.II-74 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe Each 144.00
fittings
578 TBSP-H.II-75 4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe Each 112.00
fittings
160
SS RATE
Sl.
No
17
1 2 3 4 5
579 TBSP-H.II-76 Round Jali - UPVC/SWR Pipe fittings Each 24.00
580 TBSP-H.II-77 Square tile & Jalli - UPVC/SWR Pipe fittings Each 39.00
581 TBSP-H.II-78 Pipe connector ( with LIP ring) - UPVC/SWR Pipe fittings Each 151.00
582 TBSP-H.II-79 Pipe connector ( with out LIP ring) - UPVC/SWR Pipe Each 117.00
fittings
583 TBSP-H.II-80 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings Each 138.00
584 TBSP-H.II-81 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings Each 146.00
585 TBSP-H.II-82 75 mm dia - Door cap - UPVC/SWR Pipe fittings Each 57.00
588 TBSP-H.II-85 75 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 53.00
591 TBSP-H.II-88 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe Each 8.00
fittings
fittings
fittings
594 TBSP-H.II-91 75 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 9.00
597 TBSP-H.II-94 LIP ring 110 mm - UPVC/SWR Pipe fittings Each 69.00
598 TBSP-H.II-95 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe Each 90.00
fittings
599 TBSP-H.II-96 160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe Each 224.00
fittings
III SUB-SECTION PVC PLUMBING ACCESSORIES
600 TBSP-H.III-01 Rubber Lubricant - 100 Grams Each 29.00
604 TBSP-H.III-05 P' Trap with lip UPVC/SWR Pipe fittings Each 298.00
605 TBSP-H.III-06 50 ml - Solvent Cement Each 15.00
IV SUB-SECTION LABOUR CHARGES FOR PVC PLUMBING
610 TBSP-H.IV-01 Labour charges for laying, fixing and commissioning the 1 RM 71.00
PVC pipes including couplers/ bends/ tees etc any diameter
including fixing necessary fittings like bends, plugs,
couplers, junctions, tees, etc with solvent jointing as per
standard practice
161
SS RATE
Sl.
No
17
1 2 3 4 5
611 TBSP-H.IV-02 Labour charges for laying, joining, welding, fixing and 1 RM 32.00
commissioning the PPR pipes including all specials such as
couplers/ bends/ tees etc including fixing necessary fittings
like bends, plugs, couplers, junctions, tees, etc with welding
the joint as per standard practice - up to 40 mm dia
612 TBSP-H.IV-03 Labour charges for laying, joining, welding, fixing and 1 RM 53.00
commissioning the PPR pipes including all specials such as
couplers/ bends/ tees etc including fixing necessary fittings
like bends, plugs, couplers, junctions, tees, etc with welding
the joint as per standard practice - above 40 mm dia

I SUB-SECTION MISCELLANEOUS PLUMBING WORK ITEMS
613 TBSP-J.I-01 Supplying & Fixing solder joints up to 50 mm nominal size Each 61.00
dia
614 TBSP-J.I-02 Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 12.00
615 TBSP-J.I-03 Chiselling the stone masonry wall for fixing of wooden Each 31.00
blocks including finishing as directed by the department
616 TBSP-J.I-04 Chiselling the stone masonry wall and repairs as directed by 1 Rm 145.00
the department.
617 TBSP-J.I-05 Chiselling the brick masonry wall and repairs as directed by 1 Rm 31.00
the department.
618 TBSP-J.I-06 Painting the flushing tank with white enamel paint Each 105.00
619 TBSP-J.I-07 S & F internal cistern fittings for PVC flush tank Each 820.00
620 TBSP-J.I-08 Repairing and over hauling flushing tank Each 95.00
621 TBSP-J.I-09 Removing and refixing W.C s Each 249.00
622 TBSP-J.I-10 Removing and refixing wash hand basins of any size with Each 224.00
fittings complete
623 TBSP-J.I-11 Removing 15 mm nominal sizeGI pipe and refixing the Mr. 69.00
same
same
same
626 TBSP-J.I-14 Removing 40 mm nominal sizeGI pipe and refixing the Rm 144.00
same
627 TBSP-J.I-15 Removing 50 mm nominal size GI pipe and refixing the Rm 168.00
same
628 TBSP-J.I-16 Cleaning the W.C with acid and Vim powder Each 47.00
629 TBSP-J.I-17 Cleaning the Urinal with acid and Vim power Each 47.00
630 TBSP-J.I-18 Cleaning the wash basin with acid and Vim powder Each 47.00
631 TBSP-J.I-19 Cleaning the E.W.C with acid and Vim power Each 47.00
632 TBSP-J.I-20 Cutting holes in C.C; basement & repairs Labour charges Each 109.00
only
633 TBSP-J.I-21 Cutting holes in stone masonry & basement and repairs Each 73.00
Labour charges only
162
SS RATE
Sl.
No
17
1 2 3 4 5
634 TBSP-J.I-22 Cutting holes in Brick masonry & repairs Labour charges Each 48.00
only
635 TBSP-J.I-23 Cutting holes in RCC slab floor & repairs Labour charges Each 73.00
only
636 TBSP-J.I-24 Supplying & Fixing NP chain rubber and plug for basin Each 42.00
637 TBSP-J.I-25 S & F 25 mm nominal sizedia & 609.6 mm long aluminium Each 164.00
anodized towel rod with brackets and aluminium screws
638 TBSP-J.I-26 S & F 19.04 mm dia & 609.6 mm long aluminium anodized Each 142.00
towel rod with brackets and aluminium screws
639 TBSP-J.I-27 S & F 609.6 mm long 127 mm wide plate glass shelf with Each 209.00
superior quality aluminium railing complete with
aluminium screws
640 TBSP-J.I-28 S & F 609.6 mm long 127 mm wide plate glass shelf only Each 69.00
641 TBSP-J.I-29 Supplying & fixing 88.9 mm A.C cowls Each 71.00
642 TBSP-J.I-30 Supplying & fixing A.C Cowl 63.5 mm dia Each 48.00
643 TBSP-J.I-31 S & F 76.2 x 101.6 mm teak wood block complete Each 26.00
644 TBSP-J.I-32 Supplying & Fixing 15 mm nominal sizePVC connection with Each 102.00
brass union nut C.P coated
645 TBSP-J.I-33 Removing of 101.6 m or 75 mm nominal size CI pipe 1 RM 39.00
646 TBSP-J.I-34 Supplying & fixing 75 mm nominal size W.I clamps Each 25.00
647 TBSP-J.I-35 Supplying and fixing TV shape mirror with plastic frame Each 513.00
size 609.6 mm x 457 .2 mm
648 TBSP-J.I-36 Supplying & fixing GI pipe plug of size 15 mm nominal Each 10.00
sizedia
649 TBSP-J.I-37 Supplying & fixing 20 mm dia GI plug Each 14.00
650 TBSP-J.I-38 Supplying and fixing 40 mm nominal sizedia of GI plug Each 72.00
651 TBSP-J.I-39 Supplying & fixing 50 mm nominal size dia of GI PLUG Each 110.00
652 TBSP-J.I-40 Supplying & fixing 75 mm nominal size dia of GI PLUG Each 200.00
II SUB-SECTION POLYETHYLENE-ALUMINIUM-POLYETHYLENE
COMPOSITE PIPES
653 TBSP-J.II-01 S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 1 RM 157.00
composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all
special composite fittings, plastic & brass blend inserts for
elbows, tees, reducers, couplers, connectors etc complete
for external works including laying pipes, fixing in position,
testing and commissioning etc : 16 mm OD pipe
163
SS RATE
Sl.
No
17
1 2 3 4 5

testing and commissioning etc : 25mm OD pipe



164
SS RATE
Sl.
No
17
1 2 3 4 5
with MS Iron clamps at 1.0 M spacing including cutting,
chasing walls, making good, laying pipes, fixing in position,
testing and commissioning etc 16 mm OD pipe


testing and commissioning etc 25mm OD pipe


165
SS RATE
Sl.
No
17
1 2 3 4 5

including excavating trenches up to 1.0 M deep laying pipes,
fixing in position, testing, refilling excavated earth and
commissioning etc 16 mm OD pipe


commissioning etc 25mm OD pipe

166
SS RATE
Sl.
No
17
1 2 3 4 5
III SUB-SECTION OTHER VARIETIES OF PIPES

670 TBSP-J.III-01 S&F premium make CPVC Pipes of 15.90mm OD Pipe - SDR 1 RM 141.00
13.5
13.5
13.5
13.5
13.5
13.5
11
11
11
11
11
11
682 TBSP-J.III-13 Supply of 20mm x 1.9mm PN 10/PPR pipe conforming to 1 RM 48.00
DIN Standards 8077/8078
167
SS RATE
Sl.
No
17
1 2 3 4 5
690 TBSP-J.III-21 Supply of 110mm x 10mm PN 10/PPR pipe conforming to 1 RM 1,427.00
698 TBSP-J.III-29 Supply of 90mm x 12.3mm PN 16/PPR pipe conforming to 1 RM 1,425.00
707 TBSP-J.III-38 Supply of 90mm x 15mm PN 20/PPR pipe conforming to 1 RM 1,579.00
709 TBSP-J.III-40 Supply of 20mm PPR Socket conforming to DIN Standards Each 11.00
8077/8084
8077/8085
8077/8086
8077/8087
168
SS RATE
Sl.
No
17
1 2 3 4 5
8077/8088
8077/8089
8077/8090
8077/8091
8077/8092
718 TBSP-J.III-49 Supply of 32mm PPR Core Flange conforming to DIN Each 42.00
Standards 8077/8086
Standards 8077/8087
Standards 8077/8088
Standards 8077/8089
Standards 8077/8090
Standards 8077/8091
Standards 8077/8092
725 TBSP-J.III-56 Supply of 20mm PPR Elbow conforming to DIN Standards Each 18.00
8077/8084
8077/8085
8077/8086
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
733 TBSP-J.III-64 Supply of 110mm PPR Elbow conforming to DIN Standards Each 1,530.00
8077/8092
734 TBSP-J.III-65 Supply of 20mm PPR Tee conforming to DIN Standards Each 16.00
8077/8084
8077/8085
8077/8086
169
SS RATE
Sl.
No
17
1 2 3 4 5
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
742 TBSP-J.III-73 Supply of 110mm PPR Tee conforming to DIN Standards Each 1,598.00
8077/8092
743 TBSP-J.III-74 Supply of 20mm PPR End Cap conforming to DIN Standards Each 7.00
8077/8084
8077/8085
8077/8086
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
751 TBSP-J.III-82 Supply of 110mm PPR End Cap conforming to DIN Each 708.00
Standards 8077/8092
752 TBSP-J.III-83 Supply of 25mm x 20mm PPR Reducer conforming to DIN Each 13.00
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
170
SS RATE
Sl.
No
17
1 2 3 4 5
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
775 TBSP-J.III-106 Supply of 25mm x 20mm x 25mm PPR Reducer Tee Each 35.00
conforming to DIN Standards 8077/8092
171
SS RATE
Sl.
No
17
1 2 3 4 5
794 TBSP-J.III-125 Supply of 110mm x 75mm x 110mm PPR Reducer Tee Each 1,459.00
795 TBSP-J.III-126 Supply of 110mm x 90mm x 110mm PPR Reducer Tee Each 1,517.00
796 TBSP-J.III-127 Supply of 20mm x PPR Female Threaded Adaptor Each 112.00
801 TBSP-J.III-132 Supply of 32mm x 1" PPR Female Threaded Adaptor Each 327.00
802 TBSP-J.III-133 Supply of 40mm x 1 PPR Female Threaded Adaptor Each 484.00
803 TBSP-J.III-134 Supply of 50mm x 1 PPR Female Threaded Adaptor Each 676.00
804 TBSP-J.III-135 Supply of 63mm x 2" PPR Female Threaded Adaptor Each 899.00
805 TBSP-J.III-136 Supply of 75mm x 2PPR Female Threaded Adaptor Each 1,733.00
806 TBSP-J.III-137 Supply of 20mm x PPR Male Threaded Adaptor Each 174.00
172
SS RATE
Sl.
No
17
1 2 3 4 5
810 TBSP-J.III-141 Supply of 32mm x 1" PPR Male Threaded Adaptor Each 509.00
811 TBSP-J.III-142 Supply of 40mm x 1 PPR Male Threaded Adaptor Each 597.00
812 TBSP-J.III-143 Supply of 50mm x 1 PPR Male Threaded Adaptor Each 834.00
813 TBSP-J.III-144 Supply of 63mm x 2" PPR Male Threaded Adaptor Each 1,283.00
814 TBSP-J.III-145 Supply of 75mm x 2PPR Male Threaded Adaptor Each 2,052.00
815 TBSP-J.III-146 Supply of 20mm x PPR Female Threaded Elbow Each 120.00
820 TBSP-J.III-151 Supply of 32mm x 1" PPR Female Threaded Elbow Each 362.00
821 TBSP-J.III-152 Supply of 20mm x PPR Male Threaded Elbow Each 180.00
825 TBSP-J.III-156 Supply of 32mm x1" PPR Male Threaded Elbow conforming Each 541.00
to DIN Standards 8077/8092
826 TBSP-J.III-157 Supply of 20mm x PPR Female Threaded Tee Each 116.00
831 TBSP-J.III-162 Supply of 32mm x 1" PPR Female Threaded Tee conforming Each 352.00
832 TBSP-J.III-163 Supply of 20mm x PPR Male Threaded Teeconforming to Each 181.00
173
SS RATE
Sl.
No
17
1 2 3 4 5
833 TBSP-J.III-164 Supply of 25mm x PPR Male Threaded Tee conforming Each 193.00
837 TBSP-J.III-168 Supply of 32mm x 1" PPR Male Threaded Tee conforming to Each 552.00
838 TBSP-J.III-169 Supply of 20mm x PPR Female Threaded Union Each 466.00
839 TBSP-J.III-170 Supply of 25mm x PPR Female Threaded Union Each 698.00
840 TBSP-J.III-171 Supply of 32mm x 1 PPR Female Threaded Union Each 932.00
841 TBSP-J.III-172 Supply of 40mm x 1 PPR Female Threaded Union Each 1,306.00
844 TBSP-J.III-175 Supply of 20mm x PPR Male Threaded Union conforming Each 534.00
845 TBSP-J.III-176 Supply of 25mm x PPR Male Threaded Union Each 710.00
846 TBSP-J.III-177 Supply of 32mm x 1 PPR Male Threaded Union Each 932.00
847 TBSP-J.III-178 Supply of 40mm x 1 PPR Male Threaded Union Each 1,165.00
848 TBSP-J.III-179 Supply of 50mm x 1 PPR Male Threaded Union Each 2,215.00
849 TBSP-J.III-180 Supply of 63mm x 2 PPR Male Threaded Union conforming Each 3,732.00
850 TBSP-J.III-181 Supply of 20mm PPR Union conforming to DIN Standards Each 102.00
8077/8092
8077/8092
8077/8092
853 TBSP-J.III-184 Supply of 20mm PPR Ball Valve conforming to DIN Each 186.00
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
174
SS RATE
Sl.
No
17
1 2 3 4 5
Standards 8077/8092
Standards 8077/8092
859 TBSP-J.III-190 Supply of 75mm PPR Ball Valve conforming to DIN Each 1,633.00
Standards 8077/8092
860 TBSP-J.III-191 Supply of 90mm PPR Ball Valve conforming to DIN Each 2,333.00
Standards 8077/8092
861 TBSP-J.III-192 Supply of 20mm PPR Clamp conforming to DIN Standards Each 11.00
8077/8092
8077/8092
8077/8092
8077/8092
NOTE
1 All the items to be used on work are of first quality & ISI and as approved by the
Engineer In charge of the work.
2 RATES
Note: All the prices of the material given in this section are landing costs,
including material VAT, loading, cost of conveyance, unloading & stacking at
site.
a) Supply Rates for all the materials are based on market rates plus Sales Tax/
Material VAT.
b) Works Contract VAT for General/ Composition Scheme on finished items may be
allowed as applicable.
175
Sl.
No
(Landing cost - including material VAT/ loading/ cost of conveyance/ unloading &
stacking)
I SUB-SECTION SUPPLY & LAYING OF SWG PIPES - Any ISI Brand
II SUB-SECTION S.W.G. FITTINGS - Any ISI Brand
C SECTION CENTRIFUGAL CI PIPES & FITTNGS - IS : 1729
I SUB-SECTION SUPPLY & LAYING OF CAST IRON PIPES - BIC/ NECO
II SUB-SECTION SUPPLYING & LAYING OF C.I. FITTINGS - BIC/ NECO
D SECTION CENTRIFUGAL CI PIPES & FITTNGS - IS : 3989
I SUB-SECTION SUPPLY OF CENTRIFUGAL CI PIPES - BIC/ NECO
II SUB-SECTION SUPPLY OF C.I. SPUN FITTINGS - BIC/ NECO
E SECTION VITREOUS CHINAWARE - SANITARY APPLIANCES
I SUB-SECTION INDIAN WATER CLOSETS - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
II SUB-SECTION FLOOR MOUNTED EWC - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
III SUB-SECTION WALL MOUNTED EWC - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
IV SUB-SECTION CISTERNS FOR WATER CLOSETS - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA /
Jaquar
V SUB-SECTION PLASTIC SEATS FOR WATER CLOSETS - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA
/ Jaquar
VI SUB-SECTION WASH HAND BASINS - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
VII SUB-SECTION URINALS - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
F SECTION CP FITTINGS - TAPS/ FAUCETS & ACCESSORIES
I SUB-SECTION TAPS&FAUCETS - BIB TAPS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware -
PREMIUM MAKE - Jaquar/ Hindware/ Plumber/ Parryware/ H & R Johnson, Karla
II SUB-SECTION TAPS&FAUCETS - PILLAR TAPS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware -
III SUB-SECTION TAPS&FAUCETS - OTHER TAPS & SPOUTS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/
Hindware - PREMIUM MAKE - Jaquar/ Hindware/ Plumber/ Parryware/ H & R Johnson, Karla
IV SUB-SECTION STOP & ANGLE VALVES - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware - PREMIUM
MAKE - Jaquar/ Hindware/ Plumber/ Parryware/ H & R Johnson, Karla
V SUB-SECTION COMBINATION FAUCETS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware - PREMIUM
VI SUB-SECTION SHOWERS & FITTINGS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware - PREMIUM
VII SUB-SECTION MISCELLANEOUS CP FITTINGS - Seiko/ Senior/ Nice/ Senior/ Nice/ CERA/ Hindware -
G SECTION G.I. PIPES & FITTINGS
I SUB-SECTION G.I. PIPES - Tata/ JSW/ Oswal/ Zenith
II SUB-SECTION G.I. FITTINGS - HB / Kirti/ R-Brand
III SUB-SECTION BRONZE (COPPER ALLOY) VALVES - Zoloto/ R-Brand
H SECTION PVC PIPES & FITTINGS
I SUB-SECTION PVC PIPES - Prince/Sudhakar/Kisan/Supreme/ Astral/ Finolex
II SUB-SECTION PVC FITTINGS- Prince/Sudhakar/Kisan/Supreme/ Astral/ Finolex
III SUB-SECTION PVC PLUMBING ACCESSORIES - Prince/Sudhakar/Kisan/Supreme/ Astral/ Finolex
PVC Tanks - Sintex
PVC - LLC Cisterns - Parryware/ Slimlines/ CERA/ Hindware
I SUB-SECTION POLYETHYLENE-ALUMINIUM-POLYETHYLENE COMPOSITE PIPES - Kitec/ Kisan
II SUB-SECTION CPVC PIPES - Supreme/ Ashirvad/ Astral/ Prince / Kisan / Ajay
III SUB-SECTION PPR PIPES - Supreme/ Ashirvad/ Astral/ Prince/ Kisan / SFMC
176
ELECTRICAL ITEMS
177
SL. PAGE NOS
INDEX
NO. FROM TO
SECTION - 1
1.1 M.S.CONDUIT PIPES
1.2 PVC CONDUIT PIPES
1.3 HOT DIP GALVANISED METAL BOXES

1.4 T.W. BOARDS
1.5 COPPER FLEXIBLE CABLES
SERVICE MAINS AND FLAT CABLES OF ISI FOR SUBMERSIBLE
1.6
MOTORS.
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES
1.8 MINI MODULAR SWITCHES AND ACCESSORIES
1.9 MODULAR SWITCHES AND ACCESSORIES
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE UNITS
2.2 ON LOAD CHANGE OVER SWITCHES. (OPEN EXECUTION)
2.3 CHANGE OVER SWITCHES IN SS ENCLOUSURE
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS ENCLOSURE
2.5 HRC FUSE LINKS (BOLTED TYPE)
2.6 PORCELAIN REWIRABLE FUSE UNITS.
2.7 VOLTAGE SURGE PROTECTORS
2.8 PANEL MOUNTING MCCBs/ ACBs
2.9 MCBs
2.10 ISOLATORS
2.11 RCCBs
2.12 MCB DISTRIBUTION BOARDS
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
3.2 POST TOP LANTERN LUMINAIRES
ACCESSORIES FOR MV / SV / MH LUMINAIRES I.E. COPPER
3.3 BALLASTS, ENEGRY SAVING ELECTRONIC BALLAST FOR
STREET LIGHT, CAPACITORS, IGNITORS
3.4 LAMPS
3.5 AUTOMATIC STREET LIGHT CONTROL SYSTEMS
3.6 INTERNAL LUMINAIRES
3.7 FLOURSCENT TUBES / CFL LAMPS

3.8 ENERGY CONSERVING FIXTURES
3.9 LED LUMINAIRES
178
SL. PAGE NOS
INDEX
NO. FROM TO
3.10 INDUCTION LUMINAIRES
SECTION - 4
4.1 U.G. CABLES,11 KV H. T. XLPE CABLES
4.2 11 KV H.T. XLPE CABLES

4.3 CABLE GLANDS
4.4 LUGS
4.5 HEAT SHRINKABLE LT CABLE JOINTS
4.6 3 CORE 11 KV HT CABLE STRAIGHT THROUGH JOINTS

4.7 HT END TERMINATION KITS
4.8 DOUBLE WALLED CORRUGATED HDPE PIPE
4.9 CABLE TRAYS
SECTION - 5
5.1 CEILING AND EXHAUST FANS
5.2 WATER HEATERS

5.3 ACCESSORIES FOR WATER HEATERS
5.4 STARTERS FOR MOTORS
5.5 SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS
5.6 THREE PHASE SUBMERSIBLE MOTOR PUMP SETS.
5.7 SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR PUMP SETS.
5.8 THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS.
5.9 SINGLE PHASE MONO BLOCK MOTOR PUMP SETS.
5.10 CONTROL PANEL BOARD FOR MOTORS
5.11 REPAIRS TO MOTORS AND REWINDING, BEARINGS
SECTION - 6
6.1 AIR CONDITIONERS
6.2 INVERTER SPLIT AC UNITS (COOLING ONLY)
6.3 CASSETTE TYPE AC UNITS
6.4 TOWER MODEL TYPE AC UNITS
6.5 INVERTOR MODEL HEAT COOL SPLIT AC'S
6.6 REPAIRS TO AIR CONDITIONERS
6.7 EVAPORATIVE AIR COOLING SYSTEM
179
SL. PAGE NOS
INDEX
NO. FROM TO
6.8 STABILIZERS
SECTION - 7
7.1 SWAGED POLES, GARDEN POSTS AND ACCESSORIES
7.2 OCTOGONAL POLES
7.3 BRACKETS
7.4 HIGH MAST POLES
7.5 FEEDER PILLER BOX
7.6 ERRECTION OF HIGH MAST POLES
7.7 THERMO PLASTIC POLE BOXES
7.8 FOUNDATION AND ERRECTION CHARGES OF POLES
7.9 G R P POLES
7.10 CONTROL PANEL BOARD
7.11 METERING EQUIPMENT
7.12 SUB STATION EQUIPMENT
7.13 TRANSFORMERS
7.14 L.T. LINE MATERIALS AND LIGHTENING PROTECTIVE SYSTEM
SECTION - 8
8.1 NET WORKING
SECTION - 9
9.1 MISCELLANIOUS ITEMS
SECTION - 10
10.1 WIRELESS FIRE ALARAM SYSTEM
10.2 ADDRESSABLE - FIRE ALARAM SYSTEM
10.3 CONVENTIONAL - FIRE ALARAM SYSTEM
10.4 POWDER BASED FIRE EXTINGUISHERS
10.5 CLEAN AGENT FIRE EXTINGUISHERS
10.6 WATER MIST FIRE EXTINGUISHERS
10.7 FIRE HYDRANT AND SPRINKLER SYSTEM
SECTION - 11
11.1 GENERATORS
SECTION - 12
12.1 U P S SYSTEMS
12.2 UPS BATTERY RACKS AND WIRE LEADS
OLD MATERIAL RATES
180
RATE
FOR
SL.
ITEM CODE DESCRIPTION OF ITEM Unit DRAFT
NO.
SOR
2016-17
1 2 3 4 5
SECTION - 1
1.1 M.S. CONDUIT PIPES
1 ELEC-1.1.1 Supply of ISI, 20mm dia, 16 guage
thickness MS conduit pipe.
Makes : NAI / Bharath / GB / AKG. 1 Mtr 99.00
5 ELEC-1.1.5 Supply of ISI, 50mm dia,16 guage
6 ELEC-1.1.6 Supply of 19 / 20 mm MS Junction box 1 No 27.00
normal range big size long neck.
7 ELEC-1.1.7 Supply of 25 mm MS Junction box normal 1 No 28.80
range big size long neck.
9 ELEC-1.1.9 Supply of 40 / 38 mm MS Junction box 1 No 113.25
normal range big size long neck.
11 ELEC-1.1.11 Supply of 25/20mm.MS Junction deep box. 1 No 71.00
12 ELEC-1.1.12 Supply of 32mm.MS Junction deep box. 1 No 124.00
13 ELEC-1.1.13 Supply of 40mm.MS Junction deep box. 1 No 152.35
14 ELEC-1.1.14 Supply of 19/20mm MS Inspection Bends. 1 No 23.40
15 ELEC-1.1.15 Supply of 25mm MS Inspection Bends. 1 No 25.80
17 ELEC-1.1.17 Supply of 40/38mm MS Inspection Bends. 1 No 90.00
19 ELEC-1.1.19 Supply of 19/20mm MS Inspection Tee. 1 No 25.80
20 ELEC-1.1.20 Supply of 25mm MS Inspection Tee. 1 No 27.80
22 ELEC-1.1.22 Supply of 40/38mm MS Inspection Tee. 1 No 94.80
24 ELEC-1.1.24 Supply of 19/20mm MS Inspection Elbow. 1 No 20.70
25 ELEC-1.1.25 Supply of 25mm MS Inspection Elbow. 1 No 22.00
27 ELEC-1.1.27 Supply of 40/38mm MS Inspection Elbow. 1 No 78.10
181
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
29 ELEC-1.1.29 Supply of MS Inspection 10 Guage G.I. 100 Nos 217.30
checknut size 19/20mm.
checknut size 25mm.
checknut size 32mm.
checknut size 40/38mm.
checknut size 50mm.
34 ELEC-1.1.34 Supply of 19/20mm Saddles with Base. 100 Nos 211.00
35 ELEC-1.1.35 Supply of 25mm Saddles with Base. 100 Nos 220.00
37 ELEC-1.1.37 Supply of 40/38mm Saddles with Base. 100 Nos 705.00
39 ELEC-1.1.39 Supply of 19/20mm 20 guage Saddles. 100 Nos 116.00
40 ELEC-1.1.40 Supply of 25mm 20 guage Saddles. 100 Nos 149.00
42 ELEC-1.1.42 Supply of 40/38mm 20 guage Saddles. 100 Nos 326.00
44 ELEC-1.1.44 Supply of 19/20mm 16 Guage socket 12 Nos 60.00
coupler.
45 ELEC-1.1.45 Supply of 25mm 16 Guage socket coupler. 12 Nos 72.00
50 ELEC-1.1.50 Supply of 19mm Ball Socket. 12 Nos 254.00
51 ELEC-1.1.51 Supply of 25mm Ball Socket. 12 Nos 379.00
1.2 PVC CONDUIT PIPES
52 ELEC-1.2.1 Supply of ISI 20mm outer dia medium
grade, FRLS with IS:9537 part 3 regid PVC
pipe.
Makes : Sudhakar / GM / Modi / AKG / VIP / 1 Mtr 19.10
Million Plast.
53 ELEC-1.2.2 Supply of ISI 20mm outer dia heavy grade,
FRLS with IS:9537 part 3 regid PVC pipe.
Million Plast.
pipe.
Million Plast.
55 ELEC-1.2.4 Supply of ISI 25mm outer dia heavy grade,
FRLS with IS:9537 part 3 regid PVC pipe.
182
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Million Plast.
pipe.
Million Plast.
pipe.
Million Plast.
pipe.
Million Plast.
59 ELEC-1.2.8 Supply of FRLS Non - ISI 19mm 1.80mm
thick regid PVC pipe.
Makes : Million Plast / Sudhakar / Durga / 1 Mtr 18.50
Nandi / Sunlight / Besto Plast.
60 ELEC-1.2.9 Supply of FRLS Non - ISI 25mm 1.80mm
thick regid PVC pipe.
Makes : Million Plast / Sudhakar / Durga / 1 Mtr 24.30
Nandi / Sunlight / Besto Plast.
61 ELEC-1.2.10 Supply of 19/20mm width and 12.5mm
height Casing and Caping.
Makes : Modi with ISI 1 Mtr 25.40
62 ELEC-1.2.11 Supply of 25mm width and 12.5mm height
Casing and Caping.
63 ELEC-1.2.12 Supply of 32mm width and 12.5mm height
Casing and Caping.
64 ELEC-1.2.13 Supply of 38/40mm width and 12.5mm
65 ELEC-1.2.14 Supply of Non-ISI 19/20mm width and
12.5mm height Casing and Caping.
Makes : Diamond / Durga make. 1 Mtr 17.30
66 ELEC-1.2.15 Supply of Non-ISI 25mm width and 12.5mm
Makes : Diamond / Durga make. 1 Mtr 18.50
67 ELEC-1.2.16 Supply of 20mm PVC Flexible Pipe. 1 Mtr 3.70
183
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
72 ELEC-1.2.21 Supply of 19/20mm PVC Flexible 1 No 11.00
Couplings.
73 ELEC-1.2.22 Supply of 25mm PVC Flexible Couplings. 1 No 14.00
75 ELEC-1.2.24 Supply of 40/38mm PVC Flexible 1 No 30.00
Couplings.
77 ELEC-1.2.26 Supply of 19/20mm PVC Junction Boxes 1 No 17.00
Normal.
78 ELEC-1.2.27 Supply of 25mm PVC Junction Boxes 1 No 19.00
Normal.
Normal.
Normal.
Normal.
82 ELEC-1.2.31 Supply of PVC Junction Boxes Deep size 1 No 22.00
19/20mm.
25mm.
32mm.
40/38mm.
50mm.
87 ELEC-1.2.36 Supply of 19/20mm dia 1.5mm thick PVC
Bends.
Makes : Sudhakar / GM / Modi / AKG / VIP / 1 No 4.00
Million Plast.
88 ELEC-1.2.37 Supply of 25mm dia 1.5mm thick PVC
Bends.
Million Plast.
Bends.
Million Plast.
Bends.
Million Plast.
Bends.
Million Plast.
184
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
92 ELEC-1.2.41 Dummy Cover to PVC junction boxes 1 No 4.00
1.3 HOT DIP GALVANIZED METAL BOXES
(MODULAR)
93 ELEC-1.3.1 Supply of 1 or 2 Module box 1 No 57.00
94 ELEC-1.3.2 Supply of 3 Module box 1 No 80.00
97 ELEC-1.3.5 Supply of 8 or 9 Module box 1 No 170.00
Horizontal/Vertical.
METALLIC BOXES (MS)
99 ELEC-1.3.7 Supply of 4" x 4" Metal Box 1 No 53.00
1.4 T.W. BOARDS
105 ELEC-1.4.1 Supply of T.W.Deep Box of Size 4" x 4" 1 No 10.00
112 ELEC-1.4.8 Supply of Decolam Board of Size 4" x 4" 1 No 14.00
119 ELEC-1.4.15 Supply of Peeta Board of Size 9" x 14" 1 No 53.00
124 ELEC-1.4.20 Supply of No.8 Screws of 12mm. 100 Nos 59.00
127 ELEC-1.4.23 Supply of No.8 Screws of 35/38mm. 100 Nos 96.00
129 ELEC-1.4.25 Supply of No.8 Screws of 63/75mm. 100 Nos 131.00
1.5 COPPER FLEXIBLE CABLES
(AS PER IS:694)
185
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
130 ELEC-1.5.1 Supply of 14/0.3mm (1.0 Sqmm) FRLS /
HFFR PVC insulated 1100V grade as per
IS:694/1990 specification for Copper cable.
Makes : Finolex / RR kabel / Havells. 100 Mtrs 1051.00
Makes : Polycab / HPL / RPG / Kundancab 100 Mtrs 924.00
/ Nakoda / Anchor / V-Guard / GM / Million
/ Gold Medal / Power Flex / Fine Cab / Sun
Cab / Fortune Art / Bonton / Gloster /
Gemini / Uniflex / Great White.
Makes : Nandicab / Benlo / Khanthi / 100 Mtrs 797.00
Vimal.
Vimal.
Vimal.
Vimal.
186
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Vimal.
135 ELEC-1.5.6 Supply of 140/0.3mm (10.0 Sqmm) PVC
FRLS / HFFR insulated flexible Copper
cable.
Vimal.
136 ELEC-1.5.7 Supply of 126/0.4mm (16.0 Sqmm) PVC
FRLS / HFFR insulated flexible Copper
cable
Vimal.
SHEATHED FLEXIBLE COPPER
CABLES
137 1.5.8 Supply of . PVC Insulated
and FRLS Round Sheathed Multi Core
Bright Annealed Bare Copper Conductor
Heavy Duty Industrial Cables for Voltage
Grade upto 1100 Volts as per IS: 694:1990
including all transportation charges etc
complete.
Makes : Finolex / RR kabel / Havells /

Polycab / RPG / KEI / Nakoda.
a 25 Sqmm Single Core 1 RM 170.00

b 35 Sqmm Single Core 1 RM 240.00
c 50 Sqmm Single Core 1 RM 340.00
d 70 Sqmm Single Core 1 RM 470.00
e 1.5 Sqmm (22/0.3mm)2 core 1 RM 42.00
f 2.5 Sqmm (36/).3mm) 2 Core 1 RM 67.00
187
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
g 4.0 Sqmm (56/0.3) 2 Core 1 RM 90.00
h 6.0 Sqmm (84/0.3) 2 Core 1 RM 140.00
i 4.0 Sqmm (56/0.3) 2 Core 1 RM 100.00
j 6.0 Sqmm (84/0.3) 2Core 1 RM 155.00
k 10.0 Sqmm (80/0.4) 2 Core 1 RM 200.00
l 16.0 Sqmm(126/0.4) 2 Core 1 RM 250.00
m 1.5 Sqmm (22/0.3mm) 3 core 1 RM 57.00
n 2.5 Sqmm (36/0.3mm)3 Core 1 RM 97.00
o 4.0 Sqmm (56/0.3) 3 Core 1 RM 128.00
p 6.0 Sqmm (84/0.3) 3 Core 1 RM 170.00
q 10.0 Sqmm (80/0.4) 3 Core 1 RM 219.00
r 16.0 Sqmm(126/0.4) 3 Core 1 RM 346.00
s 1.5 Sqmm (22/0.3mm)4 Core 1 RM 74.00
t 2.5 Sqmm (36/0.3mm) 4 Core 1 RM 112.00
u 4.0 Sqmm (56/0.3) 4 Core 1 RM 170.00
v 6.0 Sqmm (84/0.3) 4 Core 1 RM 270.00
w 10.0 Sqmm (80/0.4) 4 Core 1 RM 400.00
x 16.0 Sqmm(126/0.4) 4 Core 1 RM 520.00
y 25.0 Sqmm(196/0.4) 4 Core 1 RM 850.00
z 35.0 Sqmm(276.04) 4 Core 1 RM 1274.00
aa 50.0 Sqmm(396/0.4) 4 Core 1 RM 1688.00
ab 70.0 Sqmm(354/0.5) 4 Core 1 RM 2380.00
138 1.5.9 Supply of .. PVC Insulated,
Flexible Armouring Flexible Copper cable --
------,, Cores including all transportation
charges etc complete.Makes : Finolex / RR
kabel / Havells / Polycab / RPG / KEI /
Nakoda.
a 4.0 Sqmm (56/0.3) 2 Core 1 RM 121.00

b 6.0 Sqmm (84/0.3) 2 Core 1 RM 170.00
c 10.0 Sqmm (80/0.4) 2 Core 1 RM 240.00
d 16.0 Sqmm(126/0.4) 2 Core 1 RM 332.01
e 4.0 Sqmm (56/0.3) 3 Core 1 RM 141.80
f 6.0 Sqmm (84/0.3) 3 Core 1 RM 202.61
g 10.0 Sqmm (80/0.4) 3 Core 1 RM 250.00
h 16.0 Sqmm(126/0.4) 3 Core 1 RM 354.00
i 2.5 Sqmm (50/0.25) 4 Core 1 RM 140.00
j 4.0 Sqmm (56/0.3) 4 Core 1 RM 206.00
k 6.0 Sqmm (84/0.3) 4 Core 1 RM 292.00
l 10.0 Sqmm (80/0.4) 4 Core 1 RM 450.00
m 16.0 Sqmm(126/0.4) 4 Core 1 RM 761.25
n 25.0 Sqmm(196/0.4) 4 Core 1 RM 1175.54
188
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
o 35.0 Sqmm(276.04) 4 Core 1 RM 1611.75
p 50.0 Sqmm(396/0.4) 4 Core 1 RM 2287.50
q 70.0 Sqmm(354/0.5) 4 Core 1 RM 3518.44
1.6 SERVICE MAINS AND FLAT CABLE OF
ISI FOR SUBMERSIBLE MOTORS.
139 ELEC-1.6.1 Supply of 2.5 Sqmm WPSC (Weather
Proof Single Core) ISI Alluminium Wire.
Makes : Finolex / RR Kabel / Havells / 100 Mtrs 737.00
Polycab / GM / Million / V-Guard / Gold
Medal / Kundancab / HPL / RPG / Nandicab
/ Nakoda / Payal / Finecab / Gemini / Vimal.
140 ELEC-1.6.2 Supply of 6 Sqmm WPSC (Weather Proof

Single Core) ISI Alluminium Wire.


143 ELEC-1.6.5 Supply of 6 Sqmm WPTC (Weather Proof

Twin Core) ISI Alluminium Wire.

189
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
146 ELEC-1.6.8 Supply of 23 / 0060 twin core twisted / flat
heavy Copper wire.
147 ELEC-1.6.9 Supply of 3 Core 1.5 Sqmm Flat Copper

cable of ISI for Submersible Motors.
Nakoda.
Makes : Polycab / GM / Million / V-Guard / 100 Mtrs 5430.00
Gold Medal / Kundancab / HPL / RPG /
Nandicab / Payal / Finecab / Gemini /
Vimal.
cable as per IS 694:1990 for Submersible
Motors.
Nakoda.
Vimal.
Motors.
Nakoda.
Vimal.
Motors.
Nakoda.
Vimal.
190
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Motors.
Nakoda.
Vimal.
1.7 FLUSH TYPE SWITCHES AND
ACCESSORIES
152 ELEC-1.7.1 Supply of 6A 1 Way flush type Swich.
Makes : GM G Home / Gold Medal Olive / 1 No 18.00
Million Zoom / Anchor Penta Cherry / Great
white Omega
Makes : Vimal / Maru Mantero / Starex 1 No 15.00
Smile / CPL.
153 ELEC-1.7.2 Supply of 6A 2 Way flush type Swich.
white Omega
Smile / CPL.
154 ELEC-1.7.3 Supply of 6A 2 pin flush type Socket.
white Omega
Smile / CPL.
155 ELEC-1.7.4 Supply of 6A 3/2 pin flush type Socket with
shutter.
white Omega
Smile / CPL.
156 ELEC-1.7.5 Supply of 6A flush type Neon Indicator.
white Omega
Smile / CPL.
157 ELEC-1.7.6 Supply of 6A Triangle Plug Top .
white Omega
191
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Smile / CPL.
158 ELEC-1.7.7 Supply of 6A 1 Way flush type Bed Swich /
Bell Push.
white Omega
Smile / CPL.
159 ELEC-1.7.8 Supply of 16A flush type Swich.
white Omega
Smile / CPL.
160 ELEC-1.7.9 Supply of 16A flush type Socket with
shutter.
white Omega
Smile / CPL.
161 ELEC-1.7.10 Supply of 16A flush type Switch Socket
combined (2 in one).
white Omega
Smile / CPL.
162 ELEC-1.7.11 Supply of 16A Triangle Plug Top.
white Omega
Smile / CPL.
163 ELEC-1.7.12 Supply of stepped type Electronic
Regulator.
white Omega
Smile / CPL.
164 ELEC-1.7.13 Supply of 3 Plate Jumbo Ceiling Rose.
Makes : Anchor / Gold Medal Olive / Million 1 No 21.00
Zoom.
Smile / CPL.
192
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
165 ELEC-1.7.14 Supply of BH / SBH.
Zoom.
166 ELEC-1.7.15 Supply of Pendent Holder / Adopter.
Zoom.
167 ELEC-1.7.16 Supply of Telephone Jack with Connector
white Omega
168 ELEC-1.7.17 Supply of TV Antenna Outlet.
white Omega
169 ELEC-1.7.18 Supply of 15A/10A Flush type Fuse.
white Omega
170 ELEC-1.7.19 Supply of 32A DP Flush type
Makes : GM / Million / Gold Medal / Maru 1 No 106.00
Mantero / Anchor Penta Cherry / Great
white.
Makes : GM / Gold Medal / Anchor / Great 1 No 85.00
White/ Milltec / Vimal / Maru / Star.
171 ELEC-1.7.20 Supply of Calling Bell
Makes : GM / Million / Gold Medal / Anchor 1 No 50.00
/ Great white.
172 ELEC-1.7.21 Supply of Buzzer.
/ Great white.
173 ELEC-1.7.22 Supply of Ding Dong Bell.
/ Great white.
174 ELEC-1.7.23 Supply of Electronic Musical Bell.
/ Great white.
175 ELEC-1.7.24 Supply of Remote Bell.
/ Great white.
176 ELEC-1.7.25 Supply of MC Holder.
/ Great white.
177 ELEC-1.7.26 Supply of Spike Guard with 1 No Switch
and 4 Nos Sockets.
/ Great white.
193
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
178 ELEC-1.7.27 Supply of Spike Guard with 4 No Switches
and 4 Nos Sockets.
/ Great white.
1.8 MINI MODULAR SWITCHES AND
ACCESSORIES
179 ELEC-1.8.1 Supply of 6A 1 Way Mini Modular Switch
with Cover Frame.
Makes : GM / Anchor / Million / Vimal / 1 No 23.00
Gold Medal / Maru / CPL / Great White /
Uniflex.
with Cover Frame.
Uniflex.
181 ELEC-1.8.3 Supply of 6A 2 Pin Mini Modular Socket
with Cover Frame.
Uniflex.
182 ELEC-1.8.4 Supply of 6A 3/2 Pin Mini Modular Socket
with Cover Frame.
Uniflex.
183 ELEC-1.8.5 Supply of 6A Mini Modular Neon Indicator
with Cover Frame.
Uniflex.
184 ELEC-1.8.6 Supply of 6A Mini Modular Bed Switch /
Bell Push with Cover Frame.
Uniflex.
with Neon Indicator with Cover Frame.
Uniflex.
186 ELEC-1.8.8 Supply of 6A Mini Modular Bell Push with
Neon Indicator with Cover Frame.
Uniflex.
187 ELEC-1.8.9 Supply of 16A Mini Modular Switch with
Cover Frame.
194
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Uniflex.
188 ELEC-1.8.10 Supply of 16A (2 in one) Mini Modular
Switch & Socket combined with Cover
Frame.
Uniflex.
189 ELEC-1.8.11 Supply of 16A Triangle Top with Cover
Frame.
Uniflex.
190 ELEC-1.8.12 Supply of Mini Modular Stepped type
Electronic Regulator with Cover Frame.
Uniflex.
191 ELEC-1.8.13 Supply of Mini Modular Telephone Jack
with Connector with Cover Frame.
Uniflex.
192 ELEC-1.8.14 Supply of Mini Modular TV Antenna Outlet
with Cover Frame.
Uniflex.
193 ELEC-1.8.15 Supply of 16A/10A Mini Modular Flush
Fuse with Cover Frame.
Uniflex.
1.9 MODULAR SWITCHES AND
ACCESSORIES
194 ELEC-1.9.1 Supply of 6A / 10A 1 Way 1 Module
Modular Switch
Makes : GM Four-Five / Legrand Arteor / 1 No 92.00
Schneider Zen celo / Honeywell Blenge
Plus.
Makes : Legrand Myrius / Cabtree Verona / 1 No 63.00
Million / Logus / Gold Medal Curve / Anchor
Roma viola / CPL / Great White / Vimal.
Modular Switch.
195
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Plus.
196 ELEC-1.9.3 Supply of 6A / 10A 2 Pin 2 Module Modular

Socket.
Plus.
197 ELEC-1.9.4 Supply of 6A / 10A 3/2 Pin 2 Module

Modular Socket with shutter.
Plus.
198 ELEC-1.9.5 Supply of 6A / 10A 1 Module Modular

Switch with Neon Indicator.
Plus.
199 ELEC-1.9.6 Supply of 6A / 10A Modular Bell Push with

Neon Indicator.
Plus.
200 ELEC-1.9.7 Supply of 16A / 10A Modular Flush Fuse

with Neon Indicator.
Plus.
196
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

Modular Switch.
Plus.
Modular Switch.
Plus.
203 ELEC-1.9.10 Supply of 20A 1 Way 1 Module Modular

Switch with Indicator.
Plus.
204 ELEC-1.9.11 Supply of 20A 2 Module Modular Socket

with shutter.
Plus.
205 ELEC-1.9.12 Supply of 16A/6A 1 way 2 Module Combi

Socket Modular Socket with shutter.
Plus.
197
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
206 ELEC-1.9.13 Supply of 16A Triangle Top.

Plus.
207 ELEC-1.9.14 Supply of 1 Module Modular type

Electronic step type Fan Regulator.
Plus.
208 ELEC-1.9.15 Supply of Modular socket type Telephone

jack with Connector.
Plus.
209 ELEC-1.9.16 Supply of Modular co-Axial socket type TV

Antenna outlet.
Plus.
MODULAR COVER FRAMES

210 ELEC-1.9.17 Supply of 1 or 2 Modular Cover Frame.
Plus.
198
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
211 ELEC-1.9.18 Supply of 3 Modular Cover Frame.
Plus.

Plus.

Plus.
214 ELEC-1.9.21 Supply of 8 Modular Horizontal / Vertical

Cover Frame.
Plus.
215 ELEC-1.9.22 Supply of 12 Modular Vertical Cover Frame.

Plus.
SECTION - 2
2.1 PANEL MOUNTING SWITCH
DISCONNECTOR FUSE UNITS
( SDFU ) AS PER IS: 13947
216 ELEC-2.1.1 Supply of 32A TPN Switch Disconnector
Fuse Unit Cubical type without fuses.
199
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes : L&T / G E / C&S / ABB / SIEMENS 1 No 1351.00
Makes : Havells / HPL / Indo Asian / 1 No 1129.00

Standard / Vimal.

Standard / Vimal.

Standard / Vimal.

Standard / Vimal.

Standard / Vimal.

Standard / Vimal.

Standard / Vimal.
2.2 ON LOAD CHANGEOVER SWITCHES
(OPEN EXECUTION)
AS PER IS:13947
223 ELEC-2.2.1 Supply of 63A 4 Pole Change Over Switch
on Load with open Execution.
Makes : Socomec / L & T 1 No 4135.00
200
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes : ABB / GE / Siemens / Havells / 1 No 3749.00
Indo Asian / HPL / Standard / C&S / Benlo.
2.3 OFF LOAD CHANGE OVER SWITCHES
IN SS ENCLOUSURE AS PER IS:13947
230 ELEC-2.3.1 Supply of 32A 240V DP Off load
Changeover Switch in sheet steel
enclosure.
Makes : HPL / Havells / Indo Asian 1 No 1318.00
Makes : Million / Benlo / Gold Medal / Star/ 1 No 760.00
Standard / C&S.
231 ELEC-2.3.2 Supply of 63A 415V FP Off load
enclosure.
Standard / C&S.
201
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
232 ELEC-2.3.3 Supply of 100A 415V FP Off load
enclosure.
Standard / C&S.
2.4 REWIRABLE / DOUBLE BREAK
SWITCHES IN SS ENCLOSURE
AS PER IS:13947
233 ELEC-2.4.1 Supply of 32A 240V SPN Rewirable Fuse
Switch in SS enclosure.
Makes : GM / Million / Sputnik / Sigma / 1 No 620.00
Gold Medal / Benlo / Star.
234 ELEC-2.4.2 Supply of 32A 415V TPN Rewirable Fuse
237 ELEC-2.4.5 Supply of 100A 415V TPN Double Break
Switch in SS enclosure without fuses.
238 ELEC-2.4.6 Supply of 200A 415V TPN Double Break
Switch in SS enclosure without fuses.
2.5 HRC FUSE LINKS (BOLTED TYPE)
239 ELEC-2.5.1 Supply of up to 32A HRC Fuse Links.
Makes : L & T / G E / C & S / Standard / 1 No 50.00
HPL / Havells / Siemens / Indo Asian.
240 ELEC-2.5.2 Supply of 32A to 63A HRC Fuse Links.
202
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
243 ELEC-2.5.5 Supply of 400A HRC Fuse Links.
244 ELEC-2.5.6 Supply of 630A HRC Fuse Links.
2.6 PORCELAIN REWIRABLE FUSE UNITS.
245 ELEC-2.6.1 Supply of 32A 240V Porcelain Rewirable
Fuse Units.
Makes : GM / Sputnik / Kundancab / Million 1 No 99.00
/ Gold Medal / Vimal / Star / Benlo.
Fuse Units.
Fuse Units.
Fuse Units.
Fuse Units with extension strip.
Fuse Units with extension strip.
2.7 VOLTAGE SURGE PROTECTORS
251 ELEC-2.7.1 Supply of 2 Pole 2 Module 40 KA 1.4 KV
Voltage Surge Protector.
Make:Legrand / Siemens / Hager / G E / 1 No 8000.00
L&T.
L&T.
203
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
L&T.
L&T.
2.8 PANEL MOUNTING MCCBs/ ACBs
(Thermal Magnetic Release)
255 ELEC-2.8.1 Supply of 63A / 60A 3 Pole MCCB,
Adjustable, Confirms to IS/IEC 60947-2
having Breaking Capacity 25 KA with
thermal magnetic release Panel Mounted.
Makes : L&T / Schneider / Siemens / 1 No 6060.00
Legrand / Hager.
Makes : GE / ABB / Havells / HPL / Indo 1 No 4229.00
Asian / C&S / Standard.
256 ELEC-2.8.2 Supply of 63A / 60A 4 Pole MCCB,
Adjustable, Confirms to IS/IEC 60947-2
having Breaking Capacity 25 KA with
thermal magnetic release Panel Mounted.
Legrand / Hager.
257 ELEC-2.8.3 Supply of 125A 3 Pole MCCB, Adjustable,
Confirms to IS/IEC 60947-2 having
Breaking Capacity 25 KA with thermal
magnetic release Panel Mounted.
Legrand / Hager.
Breaking Capacity 25 KA with thermal
Legrand / Hager.
Breaking Capacity 36/35 KA with thermal
Legrand / Hager.
204
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
magnetic release Panel Mounted of makes
L&T (DN2-250N) / Schneider / Siemens /
Hager
Legrand / Hager.
Legrand / Hager.
262 ELEC-2.8.8 Supply of 400A 4 Pole MCCB / Confirms to
IS/IEC 60947-2 having Breaking Capacity
50 KA with thermal magnetic release Panel
Mounted.
Legrand / Hager.
PANEL MOUNTING ACBs
(Microprocessor Based)
263 ELEC-2.8.9 Supply of 630A 3 Pole, 50kA Air Circuit
Breaker electrically fixed Confirms to IS
13947-2, IEC 60947-2 and BS-EN 60947
with Micro processer based having over
load, shot circuit and earth fault Protection
Makes : Siemens / L&T / Schneider 1 No 104444.00
Makes : ABB / Legrand / HPL / GE / Hager / 1 No 94000.00
Havells / Indo Asian.
Breaker electrically drawout Confirms to
IS 13947-2, IEC 60947-2 and BS-EN 60947
load, shot circuit and earth fault Protection.
205
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Breaker electrically fixed Confirms to IS
13947-2, IEC 60947-2 and BS-EN 60947
IS 13947-2, IEC 60947-2 and BS-EN 60947
IS 13947-2, IEC 60947-2 and BS-EN 60947
load, shot circuit and earth fault protection.
IS 13947-2, IEC 60947-2 and BS-EN 60947
IS 13947-2, IEC 60947-2 and BS-EN 60947
IS 13947-2, IEC 60947-2 and BS-EN 60947
206
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
271 ELEC-2.8.17 Supply, instalation, testing and
commisioning of 800 Amp, 50KA breaking
capacity (100% Neutral busbar) air
insulated compact Raising mains system
made of CRCA sheet steel encloser of
thickness not less than 1.5 mm having
degree of protection of IP 55 as per 2127.
wall strapes, fully PVC insulated four strip
ALUMINIUM busbar in convinent sections
including , end feed unit, end cover units
suitable for 415 volts 3 phase, 4 wire, 50 Hz
A.C. System,etc.,
Makes : Legrand (Zucchini) / L&T / 1 Mtr 13328.00

Seimens / Schneider / GE
272 ELEC-2.8.18 Supply and Fixing of Spring suspension
hanger for rising Main for 400A / 800A
Raising Mains.
Makes : Legrand (Zucchini) / L&T / 1 No 5385.00
273 ELEC-2.8.19 Supply and Fixing of Suspension brackets
for rising main for 400A / 800A Raising
Mains.
274 ELEC-2.8.20 Supply and Fixing of 800 Amps Horizontal /
Vertical bends.
275 ELEC-2.8.21 Supply and Fixing of Adopter box for 400A /
800A Raising Mains.
276 ELEC-2.8.22 Supply and Fixing of 800 Amps Copper
Flexibles for three phases and neutral.
277 ELEC-2.8.23 Supply, instalation, testing and
commisioning of 400 Amp, 50KA breaking
capacity (100% Neutral busbar) air
insulated compact Raising mains system
made of CRCA sheet steel encloser of
thickness not less than 1.5 mm having
degree of protection of IP 55 as per 2127.
wall strapes, fully PVC insulated four strip
ALUMINIUM busbar in convinent sections
including required end feed unit, end
cover units suitable for 415 volts 3 phase,
4 wire, 50 Hz A.C. System, etc.
207
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes : Legrand (Zucchini) / L&T / 1 Mtr 10413.00
278 ELEC-2.8.24 Supply and Fixing of 400 Amps Horizontal /
Vertical bends.
279 ELEC-2.8.25 Supply and Fixing of 400 Amps Copper
Flexibles for three phases and neutral.
280 ELEC-2.8.26 Supply and Fixing of 400 Amps Tap off box.

281 ELEC-2.8.27 Supply and Fixing of 250 Amps Tap off box.

2.9 MCBs (AS PER IS:60898-1:2002)
282 ELEC-2.9.1 Supply of 6-32A 10KA SP MCB, C/D Curve
ISI Mark.
Makes : Legrand-DX3 / Schneider-Acti9. 1 No 201.00
Makes : Siemens / GE / ABB / GM / 1 No 162.00
Havells / HPL(Techno) / Hager / Indo Asian
(Gold Plus) / C&S / L&T / Honeywell sentry.
Makes : Gold Medal / Kundancab / Milltec / 1 No 121.00

Sputnik / Benlo.
283 ELEC-2.9.2 Supply of 40-63A 10KA SP MCB, C/D
Curve ISI Mark.

Sputnik / Benlo.
284 ELEC-2.9.3 Supply of 6-32A 10KA DP MCB, C/D Curve
ISI Mark.

Sputnik / Benlo.
208
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
285 ELEC-2.9.4 Supply of 40-63A 10KA DP MCB, C/D
Curve ISI Mark.

Sputnik / Benlo.
286 ELEC-2.9.5 Supply of 6-32A 10KA TP MCB, C/D Curve
ISI Mark.

Sputnik / Benlo.
287 ELEC-2.9.6 Supply of 40-63A 10KA TP MCB, C/D
Curve ISI Mark.

Sputnik / Benlo.
288 ELEC-2.9.7 Supply of 6-32A 10KA FP MCB, C/D Curve
ISI Mark.

Sputnik / Benlo.
289 ELEC-2.9.8 Supply of 40-63A FP MCB, C/D Curve ISI
Mark.

Sputnik / Benlo.
2.10 ISOLATORS CONFIRMS TO I E C 60947
PART-III
209
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
290 ELEC-2.10.1 Supply of 32A DP Isolator.

Sputnik / Benlo.
291 ELEC-2.10.2 Supply of 40A DP Isolator.

Sputnik / Benlo.
292 ELEC-2.10.3 Supply of 63A DP Isolator .

Sputnik / Benlo.
293 ELEC-2.10.4 Supply of 40A TP Isolator .

Sputnik / Benlo.
294 ELEC-2.10.5 Supply of 63A TP Isolator .

Sputnik / Benlo.
295 ELEC-2.10.6 Supply of 40A FP Isolator .
210
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Sputnik / Benlo.

2.11 RCCBs CONFIRMS TO

IEC:61008 AND IS:12640
298 ELEC-2.11.1 Supply of 40A 2 Pole RCCB 30mA.




211
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5


306 ELEC-2.11.9 Supply of MCB type Change Over Switch

20A Double Pole 2 way 400V AC suitable
to fix on Din Channel.
2.12 MCB DISTRIBUTION BOARDS(AS PER
IS:13032)
SPN DB
307 ELEC-2.12.1 Supply of 4 Way SPN DB with IP 20
Protection as per IS:13032 and suitable for
4Nos S.P out goings and for 1 No
Incommer etc complete.
Makes : Legrand / Schneider. 1 No 760.00
Havells / HPL / Hager / Indo Asian (Gold
Plus) / C&S / L&T / Honeywell sentry.
Sputnik / Benlo.
Sputnik / Benlo.
212
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Sputnik / Benlo.
Sputnik / Benlo.
Sputnik / Benlo.
Sputnik / Benlo.
TPN DB
313 ELEC-2.12.7 Supply of 4 Way TPN DB Horizontal with IP
20 Protection as per IS:13032 and suitable
for 12 Nos S.P. out goings and for 1 No 4
pole Incommer etc complete
Sputnik / Benlo.
213
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
pole Incommer etc complete of makes
Legrand / Schneider.
Sputnik / Benlo.
315 ELEC-2.12.9 Supply of 4 Way VTPN DB suitable for
accommodating 4 pole incomer with IP 43
TP / SP out goings etc complete.
Sputnik / Benlo.
accomodating 125A / 160A 4 Pole MCCB
as incomer and 4 Nos TP MCBs as
outgoing and with IP 43 Protection.
pole Incommer etc complete .
Sputnik / Benlo.
accommodating 4 pole incomer with IP 43
8 Nos T.P. out goings etc complete.
Sputnik / Benlo.
214
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
accomodating 125A / 160A 4 Pole MCCB
as incomer and 8 Nos TP MCBs as
outgoing and with IP 43 Protection.
320 ELEC-2.12.14 Supply of 20A SP Plug and Socket with SS
enclosure.
Sputnik / Benlo.
321 ELEC-2.12.15 Supply of 20A TP Plug and Socket with SS
enclosure.
Sputnik / Benlo.
322 ELEC-2.12.16 Supply of 32A TP Plug and Socket with SS
enclosure.
Sputnik / Benlo.
323 ELEC-2.12.17 Supply of SP Enclosure with IP 20 1 No 250.00
Protection.
324 ELEC-2.12.18 Supply of DP/TP/FP Metal Enclosure with 1 No 366.00
IP 20 Protection.
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
325 ELEC-3.1.1 Supply of 1 x 36/40 W fluorescent street
light luminaire with sheet alluminium
housing and UV stabilised acrylic cover with
Electronic ballast and all standard
accessories etc complete.
Makes : Wipro / G.E. / Phillips / Crompton / 1 No 1260.00
Bajaj / Surya.
Makes : Style Lamp / Mahita Electro / 1 No 990.00
Capart / Akhil / RK / Pro-Lite.
215
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
326 ELEC-3.1.2 Supply of 70W SV / MH Street light
luminaire integral with pressure diecast
alluminium housing having pot optics with
IP66 protection with all standard
accessories etc
Makes : Wipro / G.E. / Phillips / Bajaj / 1 No 3265.00
Crompton / Surya / Venture / Halonix / HPL.

accessories etc

accessories etc complete.

329 ELEC-3.1.5 Supply of 400W MH Flood light luminaire
with Non - integral weather proof diecast
alluminium housing with IP66 protection
with Control Gear Box without lamp
Crompton / Surya / Venture / Halonix.
330 ELEC-3.1.6 Supply of 2 x 400W MH Flood light
luminaire with Non - integral weather proof
diecast alluminium housing with IP66
protection with Control Gear Box without
lamp
Crompton / Surya / Venture.
216
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
331 ELEC-3.1.7 Supply of 500W Hallozen Flood light
luminaire with cast alluminium housing and
tough end glass cover with all standard
accessories.
332 ELEC-3.1.8 Supply of 1000W Hallozen Flood light
luminaire with cast alluminium housing and
tough end glass cover with all standard
accessories
333 ELEC-3.1.9 Supply of 1 x 26W CFL well glass, low bay
luminaire with die cast alluminium housing
epoxy gray powder coated built in
Electronic ballast with gink plated wire
guard and eye bolt.
Crompton / Havells.
3.2 POST TOP LANTERN LUMINAIRES
334 ELEC-3.2.1 Supply of 1 x 18W CFL integral post top
luminaire with conical shape, opal clear
acrylic diffuser with cast alluminium pole
mounting capsule complete with all
accessories and ballast.
Makes : Crompton / Bajaj / Surya / Havells / 1 No 1838.00
HPL.
335 ELEC-3.2.2 Supply of 70W SV / MH integral HID lamp
post top lantern BJDPTI 70SV / MH LPF or
its equivalent with diamond / Mushroom /
Spherical diffuser etc complete with all
accessories.
Makes : Wipro / Phillips / Bajaj / Crompton / 1 No 3822.00
Surya.
ACCESSORIES FOR MV / SV / MH
LUMINAIRES
3.3 COPPER BALLASTS
336 ELEC-3.3.1 Supply of 80W MV copper ballast.
Makes : G.E. / Phillips / Crompton / Bajaj / 1 No 709.00
Surya / Havells / Venture.
Makes : RK / Style Lamp / Akhil / Capart / 1 No 643.00
Mahitha Electro.
337 ELEC-3.3.2 Supply of 125W MV copper ballast.
Makes : G.E. / Phillips / Crompton / Bajaj / 1 No 775.00
Surya / Havells / Venture.
Mahitha Electro.
338 ELEC-3.3.3 Supply of 70 W SV / MH copper ballast
217
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

Mahitha Electro.
339 ELEC-3.3.4 Supply of 150 W SV / MH copper ballast.

Mahitha Electro.
340 ELEC-3.3.5 Supply of 250 W SV / MH copper ballast

Mahitha Electro.
341 ELEC-3.3.6 Supply of 400 W SV / MH copper ballast.

Mahitha Electro.
342 ELEC-3.3.7 Supply of Ignitor for SV / MH Lamp
Bajaj / Surya / HPL / Havells / Venture /
Capart.
343 ELEC-3.3.8 Supply of 4 mfd HPF Capacitor.
Makes : TIBCON / Phillips / Crompton / 1 No 95.00
Bajaj / Surya / Havells.
ENEGRY SAVING ELECTRONIC
BALLAST FOR STREET LIGHT
218
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
349 ELEC-3.3.14 Supply of 70W SV / MH Electronic ballast
having < 3W loss, PF > 0.90, THD < 15%
with 3 years guarantee
Makes : Phillips / Whipro / Trinic / GE. 1 No 2450.00
with 3 years guarantee.
with 3 years guarantee.
3.4 LAMPS
352 ELEC-3.4.1 Supply of 500W Hallozen Lamp with ISI
mark.
Makes : Phillips / Osram / Crompton / Bajaj 1 No 108.00
/ Surya / Venture / HPL / Havells / Halonix.
Makes : Elton / Style Lamp / Mahita Electro 1 No 60.00

/ Capart
353 ELEC-3.4.2 Supply of 1000W Hallozen Lamp with ISI
mark.

/ Capart
354 ELEC-3.4.3 Supply of 70W SV Lamp with ISI mark.

/ Capart

/ Capart

/ Capart
219
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

/ Capart
358 ELEC-3.4.7 Supply of 70W double end MH Lamp with
ISI mark.

/ Capart
359 ELEC-3.4.8 Supply of 150W double end MH Lamp with
ISI mark.

/ Capart
360 ELEC-3.4.9 Supply of 70W MH Lamp with ISI mark.

/ Capart

/ Capart

/ Capart

/ Capart
3.5 AUTOMATIC STREET LIGHT CONTROL
SYSTEMS
220
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
364 ELEC-3.5.1 Supply of Automatic Street Light Control
System with Optical Sensor, Low volatage
/ High voltage trip and reset, operating
voltage 150 - 280V AC, 50 HZ with suitable
SMC enclousure of IP 54 protection, MCBs
and contactor suitable to control the load of
3 KW of single phase load with necessary
clamping arrangements.
Makes : Swadeep Nature Switch / Light 1 No 11000.00

Mate.
SMC enclousure of IP 54 protection, with
suitable MCBs and contactor suitable to
control the load of 5 KW of single phase
load with necessary clamping
arrangements.

Mate.
SMC enclousure of IP 54 protection, MCBs
and contactor suitable to control the load of
8 KW of single phase load with necessary
clamping arrangements.

Mate.
voltage 150 - 280V AC per Phase, 50 HZ
with suitable SMC enclousure of IP 54
protection, MCBs and contactor suitable to
control the load of 5 KW of Three phase
arrangements.

Mate.
221
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
arrangements.

Mate.
arrangements.

Mate.
3.6 INTERNAL LUMINAIRES
370 ELEC-3.6.1 Supply of 1 x 11W Mirror light with all
standard accessories diffuser
Makes : G.E. / Phillips / Crompton / Bajaj. 1 No 678.00
Makes : Surya / Havells / HPL / Fortune 1 No 578.00
Art
371 ELEC-3.6.2 Supply of 1 x 36/40W Box type tube light
luminaire powder coated CRCA sheet steel
housing with Electronic Ballast Chokes and
all standard accessories.
Bajaj .
Makes : Surya / Havells / HPL / Fortune Art 1 No 766.00
372 ELEC-3.6.3 Supply of 2 x 36/40W Box type tube light

luminaire powder coated CRCA sheet steel
housing with Electronic Ballast Chokes and
all standard accessoriesof makes Wipro /
G.E. / Phillips / Crompton / Bajaj.
Bajaj .
Makes : Surya / Havells / HPL / Fortune Art 1 No 1173.00
222
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
373 ELEC-3.6.4 Supply of 2 x 36/40W Surface / Recessed
mounting mirror optic luminaire with powder
coated CRCA sheet steel housing with
alluminium mirror reflector and decorative
end plates with Electronic Ballast.
Makes : Phillips / Crompton / Bajaj / Surya / 1 No 2300.00
HPL / Havells.
374 ELEC-3.6.5 Supply of 2 x 36W CFL Paralite louvre (P5)
Surface / Recessed low glare Mirror Optic
luminaire comprising bright anodised
alluminium reflector with Electronic Ballst.
HPL / Havells.
375 ELEC-3.6.6 Supply of 2 x 36W CFL Direct / Indirect
Recessed low glare Mirror Optic luminaire
comprising bright anodised alluminium
reflector with Electronic Ballast.
HPL / Havells.
376 ELEC-3.6.7 Supply of 1 x 18W CFL Indoor recessed
mounting horizontal type down lights
luminaire with alluminium/Matt finished
reflecttor with Electronic Ballast.
HPL / Havells.
377 ELEC-3.6.8 Supply of 9/13W VPIT Ballast for CFL with
ISI mark.
HPL / Havells.
Makes : Fortune Art / Style Lamp / Mahita 1 No 110.00
Electro / Capart
378 ELEC-3.6.9 Supply of 18W VPIT Ballast for CFL with ISI
mark.
HPL / Havells.
Electro / Capart
379 ELEC-3.6.10 Supply of 20W / 40W Copper Wound
Ballast.
HPL / Havells.
Electro / Capart
380 ELEC-3.6.11 Supply of 18/20W VPIT Ballast.
HPL / Havells.
Electro / Capart
223
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
381 ELEC-3.6.12 Supply of 36/40W VPIT Ballast of makes
Phillips / Crompton / Bajaj / Surya.
HPL / Havells.
Electro / Capart
382 ELEC-3.6.13 Supply of 40W Starter of makes Phillips /
Crompton / Bajaj / Surya.
HPL / Havells.
Electro / Capart
383 ELEC-3.6.14 Supply of Rotor holder(FTL).
HPL / Havells.
Electro / Capart
384 ELEC-3.6.15 Supply of HID Lamp holder.
HPL / Havells.
Electro / Capart
385 ELEC-3.6.16 Supply of CFL holder of makes Phillips /
Crompton / Bajaj / Surya.
HPL / Havells.
Electro / Capart
386 ELEC-3.6.17 Supply of FTL Starter holder.
HPL / Havells.
Electro / Capart
387 ELEC-3.6.18 Supply of 36W Electronic Ballast with total
hormonic distortion is less than 10% for
FTL.
HPL / Havells.
388 ELEC-3.6.19 Supply of 36W Electronic ballast with power
factor greater than 0.9 to 0.95 suitable for
FTL.
Make : Crompton Model No.EBN 136D / 1 No 275.00
Bajaj Model No.BJHF 136 / Havells LHBF
27904025 or its equivalent.
224
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
389 ELEC-3.6.20 Supply of 2 x 36/40W Industrial Box type
tube light luminaire powder coated CRCA
sheet steel housing with Reflector and
Electronic ballast and all standard
accessories.
Makes : Crompton / Bajaj / Surya / HPL / 1 No 1615.00
Havells.
390 ELEC-3.6.21 Supply of 4 x 14W TL 5 high efficiency
recessed luminaire, epoxy powder coated
CRCA sheet steel housing, low glare with
electronic ballast including cost of lamps
etc., complete.
Makes: Phillips Model No.sereno-TBS 869 / 1 No 4300.00
Bajaj Model No.BTMRA 414 CAT II /
Crompton Model No.CRTLU414EB/S.
391 ELEC-3.6.22 Supply of 1 x 28W surface pendent
mounting T5 Luminaire Box type with
CRCA housing with Electronic Ballast and
all standard accessories
Makes : Phillips / Crompton / Bajaj / Surya 1 No 850.00
/ Havells.
392 ELEC-3.6.23 Supply of 1 x 28W surface pendent
mounting T5 Luminaire plastic housing with
integrated reflector extruded alluminium
luminaire with Electronic Ballast and all
standard accessories.
Makes : Phlillips / Crompton / Bajaj / Surya / 1 No 540.00
Havells.
393 ELEC-3.6.24 Supply of Bulk head fitting with cast
aluminium enamel painted body with water
tight, clear glass with wire guard hinged
with lock and key arrangements etc.,
complete.
Makes : Bajaj / Crompton / Surya. 1 No 350.00
394 ELEC-3.6.25 Supply of single fancy bracket with glass 1 No 215.00
shade best Indian make
395 ELEC-3.6.26 Supply of double fancy bracket with glass 1 No 385.00
shade best Indian make
3.7 FLOURSCENT TUBES / CFL LAMPS
396 ELEC-3.7.1 Supply of 40W-60W Lamp.
Style Lamp / Mahita Electro / Capart.
397 ELEC-3.7.2 Supply of Night Lamp.
Style Lamp / Mahita Electro / Capart.
398 ELEC-3.7.3 Supply of 18/20W fluorescent tube.
Makes : Phillips / Crompton / Bajaj / Surya. 1 No 41.00
225
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
399 ELEC-3.7.4 Supply of 36/40W fluorescent tube.
Makes : Phillips / Crompton / Bajaj / Surya. 1 No 45.00
Makes : Fortune Art / Style lamp / Mahita 1 No 38.00

Electro / Capart
400 ELEC-3.7.5 Supply of 28W T5 fluorescent tube.
Makes : Crompton / Bajaj / Phillips / Surya / 1 No 120.00
Havells.
401 ELEC-3.7.6 Supply of 9W Pin type CFL Lamp.
Havells / HPL / Halonix.
407 ELEC-3.7.12 Supply of up to 5W Retrofit tiny CFL.
408 ELEC-3.7.13 Supply of up to 8W Retrofit tiny CFL.
409 ELEC-3.7.14 Supply of up to 10/11W Retrofit tiny CFL.
410 ELEC-3.7.15 Supply of up to 13/14W Retrofit tiny CFL.
411 ELEC-3.7.16 Supply of 15W Retrofit tiny CFL .
412 ELEC-3.7.17 Supply of up to 18/20W Retrofit CFL.
413 ELEC-3.7.18 Supply of 23W Retrofit CFL.
226
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
414 ELEC-3.7.19 Supply of up to 25/26W Retrofit CFL.
3.8 ENERGY CONSERVING FIXTURES
415 ELEC-3.8.1 Supply of 1 x 28W Box type powder coated
energy conserving tube light luminaire with
Electronic ballast operating voltage range of
90 volts to 350 volts power factor > 0.98
current less than 130ma crest factor and
total hormonic distortion shall be as per IS
Specification with auto cut off at high
voltage suitable for 36/40W tube with 5
years guarantee for luminaire.
Makes: Trinic or its equivalent. 1 No 1060.00

416 ELEC-3.8.2 Supply of 28 W Electronic Ballast with less
than 10% total hormonic distortion and auto
cut off at High Voltage suitable for FTL with
5 years guarantee for luminaire.
Makes: Trinic or its equivalent. 1 No 800.00
3.9 LED LUMINAIRES INDOOR
417 ELEC-3.9.1 Supply and transportation of 3W LED Down 800.00
Light Recessed / Surface mounting with
System Lumens 270lm, Housing made of
Powder coated Pressure die cast aluminum
housing with extended heat sink, with
Protruded plastic Diffuser, IP20, Inbuilt
Electrical protections like Over/Under
voltage, short circuit, Over load, Open
Circuit, Miswiring, LG7 standard applicable,
operating voltage range of 150 to 300 Volts
AC, P.F 0.9, Surge protection: 2KV,
THD<15%, with high power LED's having
efficacy of 110 lumens/watt,CCT: 3000K /
4000K / 5600K 300K,
CRI80...Manufacture has to submit LM79,
LM80 & Photobiological Safety Report.
Luminaire Performance Complies to
IS10322 (Part 5/Sec 3) & IEC 60598-1,IEC
60529 and & ISO certified company.
LUMINAIRE MAKE : Phillips / OSRAM / GE

/ Crompton / VIN / Bajaj / Havells / Halonix /
HPL.
LED MAKE : PHILIPS LUMILEDS / CREE /
NICHIA / OSRAM / SAMSUNG / LG LEDs.
227
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
418 ELEC-3.9.2 Supply and Transportation of 3W Down 600.00
lighter with system lumens of 240lm,
suitable for Recessed / Surface mounting
made of Pressure die cast aluminum body
with powder coating, acrylic diffuser with
Driver, operating voltage range of 150 to
265 Volts AC, P.F 0.9, Surge protection:
2KV,THD<15%, with high power LED's
having efficacy of 100 umins/watt,CCT:
3000K - 5700K, minimum CRI70, .etc.,
completea)
LUMINAIRE MAKE : Pharox / Surya /

Syska / Muelux / Fortune Art / Capart /
Green Lites / Kashyap BLU / R-LED / GM /
Million.
419 ELEC-3.9.3 Supply and Transportation of 3W Down 540.00
made of Pressure die cast aluminum body
2KV,THD<15%, with high power LED's
having efficacy of 90 lumens/watt,CCT:
3000K - 5700K, minimum CRI70, .etc.,
complete.
LUMINAIRE MAKE : Trinic / Avni

/ Kripa Lights / Stanjo / Cosmo / VRILISO /
Pro-Lite / Godwyn / Scintilla / JSTC Solar.
228
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
420 ELEC-3.9.4 Supply and transportation of 6W LED Down 1 No 1600.00
Light Recessed / Surface mounting with
System Lumens510lm, Housing made of
Powder coated Pressure die cast aluminum
housing with extended heat sink, with
Protruded plastic Diffuser, IP20, Inbuilt
efficacy of 110 lumens/watt,CCT:
3000K/4000K/5600K 300K,
CRI80...Manufacture has to submit
LM79,LM80 & Photobiological Safety
Report. Luminaire Performance Complies
to IS10322 (Part 5/Sec 3) & IEC 60598-
1,IEC 60529 & ISO certified
company.LUMINAIRE MAKE : Phillips /
OSRAM / GE / Crompton / VIN / Bajaj /
Havells / Halonix / HPL.LED MAKE :
PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG LEDs.
421 ELEC-3.9.5 Supply and transportation of 6W LED slim 1 No 1000.00
panel Light Round / Square with System
Lumens510lm, Housing made of Powder
coated die cast aluminum housing with
extended heat sink, with Protruded plastic
Diffuser, IP20, Inbuilt Electrical protections
like Over/Under voltage, short circuit, Over
load, Open Circuit, Miswiring, LG7 standard
applicable, operating voltage range of 150
to 265 Volts AC, P.F 0.9, Surge
protection: 2KV, THD<10%, with high
power LED's having efficacy of 100
lumens/watt, CCT: 3000K/4000K/5600K
300K, CRI70. Manufacture has to submit
to IS10322 (Part 5/Sec 3) & IEC 60598-
1,IEC 60529 ISO certified company.

Million.
229
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
422 ELEC-3.9.6 Supply and Transportation of 6W Down 1 No 1300.00
made of pressure die cast aluminum body
2KV, with high power LED's having
efficacy of 90 lumens/watt,CCT: 3000K -
5700K, minimum CRI70, .etc., complete.
LUMINAIRE MAKE : Trinic / Avni

/ Kripa Lights / Stanjo / Cosmo / VRILISO /
Pro-Lite / Godwyn / Scintilla / JSTC Solar.
made pressure die cast aluminum body
Driver,operating voltage range of 150 to
2KV, with high power LED's having
efficacy of 90 lumens/watt, CCT: 3000K -
5700K, minimum CRI70, .etc.,
complete.LUMINAIRE MAKE : Procorp
/ Scintilla / R-LED / ilite LED MAKE :
PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.
424 ELEC-3.9.8 Supply and transportation of 12W LED 1 No 2350.00
Down Light Recessed / Surface mounting
with System Lumens1000lm, Housing
made of Powder coated Pressure die cast
aluminum housing with extended heat sink,
with Protruded plastic Diffuser, IP20, Inbuilt
3000K/4000K/5600K 300K,
to IS10322 (Part 5/Sec 3) & IEC 60598-1,
IEC 60529 & ISO certified company.

/ Crompton / VIN / Bajaj / Havells / Halonix
/ HPL.
230
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
suitable for Recessed / Surface
mounting made of pressure die cast
aluminum body with powder coating, acrylic
diffuser with Driver, operating voltage range
of 150 to 265 Volts AC, P.F 0.9, Surge
lumens/watt,CCT: 3000K - 5700K,
minimum CRI70,.etc., complete with
3 years warranty.

Million.
suitable for Recessed / Surface
mounting made of pressure die cast
aluminum body with powder coating, acrylic
diffuser with Driver, operating voltage range
of 150 to 265 Volts AC, P.F 0.9, Surge
lumens/watt,CCT: 3000K - 5700K,
minimum CRI70,.etc., complete with
3 years warranty.LUMINAIRE MAKE :
Trinic / Avni / Krips Lights / Stanjo / Cosmo
/ VRILISO / Pro-Lite / Goldwyn / Scintilla /
JSTC Solar.LED MAKE : PHILIPS
LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG / LG LEDs.
231
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
slimline panel light with System
coated, round / Square with Protruded
plastic Diffuser, IP20, Inbuilt Electrical
protections like Over/Under voltage, short
circuit, Over load, Open Circuit, Miswiring,
LG7 standard applicable, operating voltage
range of 150 to 265 Volts AC, P.F 0.9,
Surge protection: 2KV, THD<10%, with
high power LED's having efficacy of 110
lumens/watt,CCT: 3000K/4000K/5600K
300K, CRI80...Manufacture has to submit
to IS10322 (Part 5/Sec 3) & IEC 60598-
1,IEC 60529 & ISO certified company.

/ HPL.
slimline panel Light with System
to IS10322 (Part 5/Sec 3) & IEC 60598-

Million.
232
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
slimline panel Light with System
to IS10322 (Part 5/Sec 3) & IEC 60598-
company.LUMINAIRE MAKE : Trinic /
Avni / Krips Lights / Stanjo / Cosmo /
VRILISO / Pro-Lite / Goldwyn / Scintilla /
SAMSUNG / LG LEDs.
3000K/4000K/5600K 300K,
to IS10322 (Part 5/Sec 3) & IEC 60598-

/ HPL.
233
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
with System Lumens1500 lm, Housing
3000K/4000K/5600K 300K,
CRI70...Manufacture has to submit LM79,
LM80 & Photobiological Safety Report.
Luminaire Performance Complies to
IS10322 (Part 5/Sec 3) & IEC 60598-1,IEC
60529 & ISO certified
company.LUMINAIRE MAKE : Pharox /
Surya / Syska / Muelux / Fortune Art /
Capart / Green Lites / Kashyap BLU / R-
LED / GM / Million. LED MAKE : PHILIPS
SAMSUNG / LG LEDs.
3000K/4000K/5600K 300K,
to IS10322 (Part 5/Sec 3) & IEC 60598-
LUMINAIRE MAKE : Trinic / Avni / Krips

Lights / Stanjo / Cosmo / VRILISO / Pro-Lite
/ Goldwyn / Scintilla / JSTC Solar.
234
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
panel Light with System Lumens1540lm,
Housing made of Powder coated aluminum
housing with extended heat sink, Round /
Square with Protruded plastic Diffuser,
IP20, Inbuilt Electrical protections like
Over/Under voltage, short circuit, Over
LM79, LM80 & Photobiological Safety
to IS10322 (Part 5/Sec 3) & IEC 60598-
OSRAM / GE / Crompton / VIN / Bajaj /
Havells / Halonix / HPL.
to IS10322 (Part 5/Sec 3) & IEC 60598-

Million.
235
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
to IS10322 (Part 5/Sec 3) & IEC 60598-
company.LUMINAIRE MAKE : Trinic /
Avni / Krips Lights / Stanjo / Cosmo /
VRILISO / Pro-Lite / Goldwyn / Scintilla /
SAMSUNG / LG LEDs.
436 ELEC-3.9.20 Supply and transportation of 20W, 1 No 1400.00
2000 lumens, T8,1200mm length LED
tube light, input voltage AC 220 - 260Volts
with PF0.9, Surge protection:
2KV,THD<10%, with inbuilt driver and
frosted cover CCT: 3000K - 5700K,
minimum CRI80,.etc., complete
Manufacture has to submit LM79,LM80 &
Photobiological Safety Report. Luminaire
Performance Complies to IS10322 (Part
5/Sec 3) & IEC 60598-1,IEC 60529 ISO
certified company.
LUMINAIRE MAKE: Phillips / OSRAM / GE

/ HPL.
tube light, input voltage AC 220 - 260 Volts
minimum CRI70,.etc.,complete.
LUMINAIRE MAKE: Pharox / Surya /

Green lites / Kashyap BLU / R-LED / GM /
Million.
236
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
tube light, input voltage AC 220 - 260 Volts
minimum
CRI70,.etc.,complete.LUMINAIRE MAKE :
Avni / Stanjo / Cosmo / VRILISO / JSTC
Solar.LED MAKE : PHILIPS LUMILEDS /
CREE / NICHIA / OSRAM / SAMSUNG /
LG LEDs.
439 ELEC-3.9.23 Supply and transportation of 1 No 1300.00
18W/20W, 1700 lumens, 1200mm
length T5 LED light, input voltage AC 165 -
260 Volts with PF0.9, Surge protection:
minimum CRI80, Manufacture has to
submit LM79,LM80 & Photobiological
Safety Report. Luminaire Performance
Complies to IS10322 (Part 5/Sec 3) & IEC
60598-1,IEC 60529 & ISO certified
company. .etc., complete.
LUMINAIRE MAKE: Phillips / OSRAM / GE

/ Crompton / VIN / Bajaj / Havells / Halonix /
HPL.
18W/20W, 1700 lumens, 1200mm

Million.
237
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
18W/20W, 1700 lumens, 1200mm
LUMINAIRE MAKE: Trinic / Avni / Kripa

442 ELEC-3.9.26 Supply and Transportation of 36W , 2' x 2' 1 No 5350.00
(600mm x 600mm) slim panel LED
luminaire Round / Square with System
Lumens of 3000, Housing Made of
Aluminum alloy with corrosion resistant
powder coat, with Diffuser , operating
voltage range of 100 to 270 Volts AC, P.F
0.95, Surge protection: 2KV, THD<10%,
Inbuilt Electrical protections like Over/Under
Circuit, Miswiring with high power LED's
3000K - 5700K, minimum CRI80,
5/Sec 3) & IEC 60598-1,IEC 60529 and
Manufacture should be ISO certified
OSRAM / GE / Crompton / Bajaj / Havells /
Halonix / HPL.LED MAKE : PHILIPS
SAMSUNG / LG LEDs.
443 ELEC-3.9.27 Supply and Transportation of 36W, 2' x2' 1 No 4760.00
(600mm x 600mm) slim panel LED
luminaire Round / Square Housing Made of
powder coat, with acrylic diffuser, Constant
current out put of Driver operating voltage
range of 150 to 265 Volts AC, Power factor
0.9 high power LEDs having efficacy of
100 lumens/watt, junction temperature less
than 85 degrees centigrade and THD is
less than 12% etc., complete.
238
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Million.
444 ELEC-3.9.28 Supply and Transportation of 36W 2' x2' 1 No 4420.00
(600mm x 600mm) Slim panel LED
luminaire Round / Square Housing Made of
current out put of Driver operatingvoltage
less than 12% etc., complete.
LUMINAIRE MAKE : Trinic / Avni / Kripa

(600mm x 600mm) Recessed / Surface
mounted LED luminaire made of CRCA
sheet housing with powder coated with
acrylic diffuser, Constant current out put of
Driver operating voltage range of 150 to
265 Volts AC, Power factor 0.9 high
power LEDs having efficacy of 100
lumens/watt, junction temperature less than
85 degrees centigrade and THD is less
than 12% etc., complete.company.
LUMINAIRE MAKE : Phillips - / OSRAM /
GE / Crompton / Bajaj / Havells / Halonix /
HPL.LED MAKE : PHILIPS LUMILEDS /
LG LEDs.
239
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
(600mm x 600mm) Recessed / Surface
mounted LED luminaire made of CRCA
sheet housing with powder coated with
acrylic diffuser, Constant current out put of
Driver operating voltage range of 150 to
265 Volts AC, Power factor 0.9 high
power LEDs having efficacy of 100
lumens/watt, junction temperature less than
85 degrees centigrade and THD is less
than 12% etc., complete.

Million.
447 ELEC-3.9.31 Supply and Transportation of 36W 1 No 4160.00
Recessed / Surface mounting 2' x 2'
(600mm x 600mm) LED luminaire made of
CRCA sheet housing with powder coated
with acrylic diffuser, Constant current out
put of Driver operating
voltage range of 150 to 265 Volts AC,
Power factor 0.9 high power LEDs having
efficacy of 90 lumens/watt, junction
temperature less than 85 degrees
centigrade and THD is less than 12%
etc., complete.
LUMINAIRE MAKE : Trinic / Avni / Kripa

448 ELEC-3.9.32 Supply and Transportation of 45W , 2' x 2' 1 No 5780.00
(600mm x 600mm) slim LED luminaire
Round / Square with System Lumens of
3000, Housing Made of Aluminum alloy
with corrosion resistant powder coat, with
Diffuser , operating voltage range of 100
protection: 2KV, THD<10%, Inbuilt
Circuit, Miswiring with high power LED's
3000K - 5700K, minimum CRI70,
5/Sec 3) & IEC 60598-1,IEC 60529 and
Manufacture should be ISO certified
240
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
company.LUMINAIRE MAKE : Phillips - /
OSRAM / GE / Crompton / Bajaj / Havells /
Halonix / HPL.LED MAKE : PHILIPS
SAMSUNG / LG LEDs.
(600mm x 600mm) slim LED luminaire
Round / Square Housing Made of
current out put of Driver operating voltage
less than 12%, minimum CRI70, etc.,
complete.

Muelux / Fortune Art / Syska / Green lites.
450 ELEC-3.9.34 Supply and transportation of MS frame with 1 No 475.00
powder coating suitable for 600mm x
600mm LED panel light.
451 ELEC-3.9.35 Supply & Fixing of LED box type batten 1 No 150.00
frame made with CRCA sheet powder
coated.
3.10 LED INDOOR LAMPS
452 ELEC-3.10.1 Supply of 0.5W LED Lamp with input
voltage 90 to 300V, Colour temparature
3000k - 6500k, Beam angle 170 - 220
degrees, B22 base, 40 Lumens.
Makes: Phillips / OSRAM / GE / Crompton / 1 No 70.00
VIN / Bajaj / Havells / Pharox / Halonix /
Greenlites.
3000k - 6500k, Beam angle 170 - 220
degrees, B22 base, 210 Lumens of Makes:
Phillips / OSRAM / GE / Crompton / VIN /
Bajaj / Havells / Halonix / Green lites.
Green lites.
241
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
3000k - 6500k, Beam angle 170 - 220
degrees, B22 base, 350 Lumens of Makes:
Phillips / OSRAM / GE / Crompton / VIN /
Bajaj / Havells / Halonix / Green lites.
Green lites.
3000k - 6500k, Beam angle 170 - 220
degrees, B22 base, 490 Lumens.
Green lites.
456 ELEC-3.10.5 Supply of LED Candel Lamp for shandliers.
Green lites.
3.11 LED STREET LIGHTS

457 ELEC-3.11.1 Supply and transportation of ......... LED Street light
Body made of high grade pressure die cast
Aluminum alloy with corrosion resistant powder coat,
having protective toughened glass cover, Less Glare,
IP 66 (Silicon gasket ensures Optical & Electrical
compartments are IP 66) protected, universal Voltage
100 - 270 V AC, P.F, 0.90, high power LED's having
efficacy 130 lumens/watt, and junction temperature <
75C, with Ingress protection IP66, Driver surge
protection 4KV, with optics distribution Type II
medium, THD<10% at 110 Volts AC, driver efficiency
90%, CCT: 5600K, minimum CRI80, Inbuilt
Electrical protections like Over voltage, short circuit,
Over load, Open Circuit, Miswiring, Intelligent pole
mounting option provides flexibility of vertical or
horizontal pole mounting option complete, with Top
Openable Maintenance and Manufacture has to
submit LM79,LM80 & Photobiological Safety Report.
Luminaire Performance Complies to IS10322 (Part
5/Sec 3) & IEC 60598-1,IEC 60529 and ISO certified
company.
LUMINAIRE MAKE : PHILIPS / OSRAM / GE /

CROMPTON / BAJAJ / SCHREDER / VIN / HALONIX
/ HAVELLS / HPL.
LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG LEDs.
a 20 W 1 No 5000.00
b 30 W 1 No 8400.00
c 43 / 45 W 1 No 8600.00
d 60 / 65 W 1 No 14400.00
e 72 W 1 No 14600.00
242
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
f 90W 1 No 19000.00
g 120 W 1 No 23000.00
h 150 W 1 No 25500.00
i 180 W 1 No 28500.00
j 210 W 1 No 33320.00
458 ELEC-3.11.2 Supply and transportation of ......... LED
Street light Luminaire made of high grade
aluminum pressure die cast housing body
with powder coated, having protective
toughened glass (Silicon gasket ensures
Optical & Electrical compartments are IP 66
)protected, Supply Input voltage 120 - 270
V AC, P.F 0.90, high power LED's having
efficacy 120 lumens/watt, System efficacy
95lm/W and junction temperature < 70C,
with Ingress protection IP65, Driver surge
protection 4KV, external Surge protection
5KV with optics distribution Type II medium,
THD<10% at 110 Volts AC, driver efficiency
90%, CCT: 3000K - 5700K, minimum
CRI70, etc., complete.LUMINAIRE MAKE
: AVNI / GOLDWYN / SURYA / MUELUX /
KRIPA LIGHTS / / SYSKA / FORTUNE
ART / CAPART / GREENLITES / R-LED /
POLYCAB / INSTA POWER / GM /
MILLION / JAQUAR.LED MAKE : PHILIPS
SAMSUNG / LG LEDs.
a 20 W 1 No 4900.00
b 30 W 1 No 6430.00
c 43 / 45 W 1 No 8075.00
d 60 / 65 W 1 No 10200.00
e 72 W 1 No 12410.00
f 90W 1 No 14025.00
g 120 W 1 No 19550.00
h 150 W 1 No 21675.00
i 180 W 1 No 24225.00
j 210 W 1 No 28320.00
243
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
459 ELEC-3.11.3 Supply and transportation of ......... .LED
Street light Luminaire made of pressure die
cast aluminum body with powder coated,
having protective toughened glass (Silicon
gasket ensures Optical & Electrical
compartments are IP 66 )protected, Supply
Input voltage 120 - 270 V AC, P.F 0.90,
high power LED's having efficacy 100
lumens/watt, System efficacy 85lm/W and
junction temperature < 70C, with Ingress
protection IP65, Driver surge protection
4KV, external Surge protection 5KV with
optics distribution Type II medium,
THD<10% at 110 Volts AC, driver efficiency
90%, w, CCT: 3000K - 5700K, minimum
CRI70, etc., complete.
LUMINAIRE MAKE : STANJO / COSMO /

TRINIC / VRILISO / KASHYAP BLU / PRO-
LITE / SCINTILLA.
a 20 W 1 No 4420.00
b 30 W 1 No 5780.00
c 43 / 45 W 1 No 7310.00
d 60 / 65 W 1 No 9180.00
e 90W 1 No 12620.00
f 120 W 1 No 16150.00
g 150 W 1 No 19550.00
h 180 W 1 No 21670.00
i 210 W 1 No 24225.00
Flood light Luminaire made of pressure die
cast aluminum housing with powder
coated, having toughened glass cover,IP
65/66 (Silicon gasket ensures Optical &
Electrical compartments are IP 66
)protected, input voltage range of 100 to
270 volts AC,power factor 0.90, high
power LED's having efficacy 130
lumens/watt and junction temperature < 85
degree centigrade of IP65 with optics, total
harmonic distortion less than 10% at 110
Volts AC, driver efficiency 90% etc
complete. LUMINAIRE MAKE : PHILIPS /
OSRAM / GE / CROMPTON / BAJAJ /
SCHREDER / VIN / HALONIX / HAVELLS /
HPL.LED MAKE : PHILIPS LUMILEDS /
LG LEDs.
a 60 W 1 No 10620.00
b 90 W 1 No 14870.00
244
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
c 120 W 1 No 19970.00
Flood light Luminaire made of pressure die
cast aluminum housing with powder
coated, having toughened glass cover,IP
65/66 (Silicon gasket ensures Optical &
Electrical compartments are IP 66
)protected, input voltage range of 100 to
270 volts AC,power factor 0.90, high
power LED's having efficacy 120
lumens/watt and junction temperature < 85
degree centigrade of IP65 with optics, total
harmonic distortion less than 15% at 110
Volts AC, driver efficiency 90% etc
complete.
LUMINAIRE MAKE : PHAROX / AVNI /

GOLDWYN / SURYA / MUELUX / KRIPA
LIGHTS / FORTUNE ART / CAPART /
SYSKA / STANJO / GREENLITES / TRINIC
/ PRO-LITE / SCINTILLA / JSTC - SOLAR /
INSTA POWER / GM / MILLION /
JAQUAR.
a 60 W 1 No 8920.00
b 90 W 1 No 13170.00
c 120 W 1 No 16570.00
3.12 LED DRIVERS
462 ELEC-3.12.1 Supply and transportation of LED Driver
with input line voltage 120V-270V AC, 50Hz
with surge protection more than 2.5 KV,
IP20, suitable for 6 / 9 W LED down lighter
with 2 Years Warranty.
LUMINAIRE MAKE : PHILIPS / OSRAM / GE / 1 No 250.00
/ HAVELLS / HPL.
LUMINAIRE MAKE : PHAROX / AVNI / GOLDWYN / 1 No 235.00
SURYA / KRIPA LIGHTS / FORTUNE ART / CAPART
/ SYSKA / STANJO / GREENLITES / TRINIC / PRO-
LITE / SCINTILLA / JSTC - SOLAR / INSTA POWER /
GM / MILLION / JAQUAR.

IP20, suitable for 12 / 18 W LED down
lighter with 2 Years Warranty.
/ HAVELLS / HPL.
245
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

IP20, suitable for 36W, 2'x2' panel light with
2 Years Warranty.
/ HAVELLS / HPL.

IP20, suitable for 40/45W, 2'x2' panel light
/ HAVELLS / HPL.

with surge protection of 4.0 KV, IP20,
suitable for 15-30W, LED street light fitting
/ HAVELLS / HPL.

/ HAVELLS / HPL.
246
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

/ HAVELLS / HPL.
3.13 INDUCTION LUMINARIES

469 ELEC-3.13.1 Supply and Transportation of Induction
Type street light luminaire of following
capacities comprises of single piece die
cast Aluminium body and IP65 protection
including Induction lamp and ballast etc.,
Complete with 5 years warranty.
Makes : Crompton / Bajaj / Surya / LVD
RAES / Billion Light / Fortune Art / Synergy
Solutions / Tej-Kashyap.
a 80W 1 No 15800.00
b 120W 1 No 17900.00
470 ELEC-3.13.2 Supply and Transportation of Induction
Type Flood light luminaire of following
capacities comprises of single piece die
cast Aluminium body and IP65 protection of
including Induction lamp and ballast etc.,
Complete with 5 years warranty.
Makes : Crompton / Bajaj / Surya / LVD
RAES / Billion Light / Fortune Art / Synergy
Solutions / Tej-Kashyap.
a 150W 1 No 20500.00
b 200W 1 No 22000.00
3.14 BALLASTS FOR INDUCTION LAMPS
471 ELEC-3.14.1 Supply of 80W ballasts for Induction Lamp.
Makes : Crompton / Bajaj / Surya / Synergy 1 No 4400.00
Solutions / Fortune Art / Billion Light.
472 ELEC-3.14.2 Supply of 120W ballasts for Induction

Lamp.
247
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

Lamp.

Lamp.
SECTION - 4
4.1 U.G. CABLES
475 ELEC-4.1.1 Supply of 4 Sqmm 2 Core XLPE insulated,
1100V grade armoured alluminium cable as
per specification confirming to IS:7098 (Part
- I)
Makes : Torrent / Universal / Unicab / 1 Mtr 92.00
Polycab / Havells / Gloster / KEI.
Makes : RPG / Finolex / Paragon / V-Guard 1 Mtr 78.00
/ Fortune Art / Suncab / Finecab / Gemscab
/ Payal.
- I).
/ Payal.
- I).
/ Payal.
478 ELEC-4.1.4 Supply of 6 Sqmm 4 Core XLPE insulated, 1 Mtr 130.00
- I).
248
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
/ Payal.
- I).
/ Payal.
- I).
/ Payal.
481 ELEC-4.1.7 Supply of 25 Sqmm 3.5 Core XLPE
insulated, 1100V grade armoured
alluminium cable as per specification
confirming to IS:7098 (Part - I).
/ Payal.
/ Payal.
/ Payal.
249
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
/ Payal.
/ Payal.
/ Payal.
Makes : RPG / Finolex / V-Guard / Gloster / 1 Mtr 658.00
Suncab / Finecab / Gemscab.
Makes : RPG / V-Guard. 1 Mtr 806.00
250
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
4.2 11 KV H.T. XLPE CABLES
492 ELEC-4.2.1 Supply of 3 Core 11 KV 35 Sqmm HT XLPE
(E) armoured Cable, as per IS specification
confirming to IS 7098/II/85 with latest
ammendments.
Makes : Torrent / Universal / Unicab / 1 No 603.00
Polycab / Havells / KEI / RPG / Gloster.
ammendments.
ammendments.
ammendments.
496 ELEC-4.2.5 Supply of 3 Core 11 KV 120 Sqmm HT
XLPE (E) armoured Cable, as per IS
specification confirming to IS 7098/II/85
with latest ammendments.
251
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
4.3 CABLE GLANDS
501 ELEC-4.3.1 Supply of Single compression brass cable 1 No 327.00
glands for 3.5 core XLPE armoured cable
for 185Sqmm with brass washers complete.



505 ELEC-4.3.5 Supply of single compression brass cable 1 No 94.00

glands for 4 core XLPE armoured cable up
to 16.0 Sq.mm with brass washers
complete.
252
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
506 ELEC-4.3.6 Supply of single compression brass cable 1 No 138.00
from 25 Sqmm to 50.0 Sq.mm with brass
washers complete.
from 70 Sqmm to 150.0 Sq.mm with brass
washers complete.
4.4 LUGS
508 ELEC-4.4.1 Supply of copper lugs confirming to I.S 1 No 22.00
specifications for cable upto 16 Sq.mm
including nuts and bolts with connections.
specifications for cable of 25 Sq.mm
520 ELEC-4.4.13 Supply of aluminium lugs confirming to I.S 1 No 12.00
specifications for cable upto 16 Sq.mm
253
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
4.5 HEAT SHRINKABLE LT CABLE JOINTS
532 ELEC-4.5.1 Supply of heat shrinkable straight through
joint Indoor / Out door for L.T. XLPE
Armoured 1100V grade cable complete with
necessary accessories and suitable clamps
including cost and conveyance of materials
complete for 10 to 16 Sqmm with outer
tubing seemless type.
Makes : Transeal - Hong shang / Raychem 1 No 1300.00

/ M Seal / Multy.
254
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
complete for 25 to 50 Sqmmwith outer

/ M Seal / Multy.
complete for 70 to 185 Sqmm with outer

/ M Seal / Multy.
535 ELEC-4.5.4 Supply and errecting heat shrinkable
straight through joint Indoor / Out door for
L.T. XLPE Armoured 1100V grade cable
complete with necessary accessories and
suitable clamps including cost and
conveyance of materials and all labour
charges etc., complete for 240 to 300
Sqmm with outer tubing seemless type.

/ M Seal / Multy.
complete for 400 Sqmm with outer tubing
seemless type.

/ M Seal / Multy.
4.6 3 CORE 11 KV HT CABLE STRAIGHT
THROUGH JOINTS
255
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
537 ELEC-4.6.1 Providing and erecting heat shrinkable
straight through joint out door / indoor for
H.T, XLPE Insulated armoured cable
11000V grade complete with necessary
accessories and suitable clamps duly
erected and connected to the supply for the
following multi core cables including cost
and conveyance of materials and all
labour charges etc., complete for 16 to
35Sqmm with outer tubing tubular type.

/ M Seal / Multy.
95Sqmm with anti tracking material.

/ M Seal / Multy.
185Sqmm with anti tracking material.

/ M Seal / Multy.
4.7 HT END TERMINATION KITS
540 ELEC-4.7.1 Providing and errecting heat shrinkable
indoor termination kit for 11 KV XLPE HT
cable 3 core 70-95 Sqmm with necessary
materials etc., complete.
/ M Seal / Multy.
cable 3 core 120 Sqmm with necessary
256
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
/ M Seal / Multy.
/ M Seal / Multy.
/ M Seal / Multy.
outdoor termination kit for 11 KV XLPE HT
materials etc., complete with anti tracking
red colour material as per IEC / IS specs
only.
/ M Seal / Multy.
cable 3 core 120 Sqmm with necessary
only.
/ M Seal / Multy.
only.
/ M Seal / Multy.
546 ELEC-4.7.8
Providing and errecting heat shrinkable
/ M Seal / Multy.
4.8 DOUBLE WALLED CORRUGATED HDPE
PIPE
257
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
547 ELEC-4.8.1 Supply and Transportation of Outer dia
50mm and Inner dia 38mm double walled
corrugated HDPE duct made as per
specification BSEN - 500 86/IS 14930 Part-
II with all accessories like couplers, bends,
end caps, Ts etc., complete.
Makes:DURA LINE (Dura Guard) or its 1 Mtr 97.00
equivalent make.
equivalent make.
equivalent make.
equivalent make.
120mm and Inner dia 103.50mm double
walled corrugated HDPE duct made as per
equivalent make.
equivalent make.
258
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
equivalent make.
equivalent make.
4.9 CABLE TRAYS
555 ELEC-4.9.1 Supply and Installation of 600mm x 75mm x 1 Mtr 1300.00
2mm thick hot dip GI perforated cable tray
with cover along with required angle
supports, with coupler plates, Anchor bolts
and nuts etc complete and the tray should
be fitted on the wall / Ceiling etc. complete.
2mm thick GI perforated cable tray with
cover along with required angle supports,
with coupler plates, Anchor bolts and nuts
etc complete and the tray should be fitted
on the wall / Ceiling etc. complete.
259
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
2mm thick GI Ladder type cable tray along
with required angle supports, with coupler
plates, Anchor bolts and nuts etc complete
and the tray should be fitted on the wall /
Ceiling etc. complete.
Note: Perforated cable trays provided
without cover 30% may be deducted from
above rates.
SECTION - 5
5.1 FANS
563 ELEC-5.1.1 Supply of 48" (1200mm) Sweep ISI mark
Ceiling Fan as per IS 374 - 1979 and, with
double ball bearings but without Regulator.
Makes : Crompton / Bajaj Kassels 50 / 1 No 1760.00
Usha atom
564 ELEC-5.1.2 Supply of 48" (1200mm) Sweep 5 Star
rated Ceiling Fan without Regulator.
Makes : Crompton HS Decora / Bajaj Regal 1 No 2220.00
star / Havells Fusion 50 / Orient Summer
Crown / Usha technix decorative
565 ELEC-5.1.3 Supply of 56" (1400mm) Sweep Ceiling Fan
as per IS 374 - 1979 and, with double ball
bearings but without Regulator.
Makes : Crompton / Bajaj Kassels 50 / 1 No 1840.00
Usha atom
566 ELEC-5.1.4 Supply of 56" (1400mm) Sweep 5 Star
rated Ceiling Fan without Regulator.
Makes : Crompton / Bajaj Elegance Star / 1 No 2160.00
Usha / Havells.
567 ELEC-5.1.5 Supply of 16" (400mm) Wall mounted Fan.
Makes : Crompton SDX Gold / Bajaj Elite / 1 No 2352.00
Havells Swing Premia gold / Usha / Orient
Wall 43.
568 ELEC-5.1.6 Supply of 16" (400mm) Pedestal Fan.
260
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes : Crompton SDX Gold / Bajaj 1 No 2714.00
Spectrum / Havells Swing Remote / Usha /
Orient.
569 ELEC-5.1.7 Supply of 18" (450mm) Wall mounting /
Pedestal Air Circulators
Makes : Crompton / Havells Turbo Force / 1 No 6000.00
Orient / Almounard.
570 ELEC-5.1.8 Supply of 24" (600mm) Wall mounting /
Pedestal Air Circulators
Makes : Crompton / Havells Turbo Force / 1 No 6600.00
Almounard.
571 ELEC-5.1.9 Supply of 12" (300mm) Cabin fan.
Makes : Crompton / Havells ciera / Orient 1 No 1550.00
AP12.
572 ELEC-5.1.10 Supply of 12" (300mm) Light duty exhaust
fan with wire guard etc complete
Makes : Crompton / Bajaj Bahar WG / 1 No 1350.00
Havells Ventil Air-DB / Orient hill air.
573 ELEC-5.1.11 Supply of 9" (225mm), Light duty exhaust
fan with double ball bearing and wire guard
etc complete.
Makes : Crompton / Bajaj Bahar WG / 1 No 1265.00
Havells Ventil Air-DS / Orient hill air.
574 ELEC-5.1.12 Supply of 12" (300mm) ISI, 900 RPM
Heavy duty exhaust fan with metallic blades
with Mark
Makes : Crompton / Almounard / Havells 1 No 2645.00
Turbo Force.
with Mark.
Turbo Force
with Mark.
Turbo Force
5.2 WATER HEATERS
577 ELEC-5.2.1 Supply, Transportation and fixing of storage
/ Pressure type Vertical / Horizontal
230/250V single phase 2000watts ISI mark
5 Star rated water heater with SS tank and
ABS plastic body of 15 Ltrs capacity to
withstand up to 6.5 bar of water pressure
including all standard accessories and dead
weight pressure reducing valve on out let
side, including cost of 2 Nos SS flexible
braided pipe, testing and all labour charges
261
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
etc., complete.
Makes : Crompton model No. solarium plus 1 No 9300.00
SWH 725, Class 1 rated or its equivalent
make of Bajaj / Venus / Racold / AO Smith
578 ELEC-5.2.2 Supply, Transportation and fixing of storage

/ Pressure type Vertical / Horizontal
230/250V single phase 2000watts ISI mark
5 Star rated water heater with SS tank and
ABS plastic body of 25 Ltrs capacity to
withstand up to 6.5 bar of water pressure
including all standard accessories and dead
weight pressure reducing valve on out let
side, including cost of 2 Nos SS flexible
braided pipe, testing and all labour charges
etc., complete.
Makes : Crompton model No. solarium plus 1 No 10900.00

SWH 725, Class 1 rated or its equivalent
make of Bajaj / Venus / Racold / AO Smith
5.3 ACCESSORIES FOR WATER HEATERS

579 ELEC-5.3.1 Heating element of 1.5 / 2.0 / 3.0 KW. 1 No 400.00
0
580 ELEC-5.3.2 Supply of thermostat with range 30 to 1 No 275.00
0
90 C.Adjustable and suitable for 25 to 50
Ltrs. Capacity.
581 ELEC-5.3.3 Supply of pressure release valve for water 1 No 275.00
heater of 15 to 50 Ltrs.capacity.
582 ELEC-5.3.4 Flexible Nylon / PVC Metallic hose pipe 1 No 165.00
5.4 STARTERS FOR MOTORS
583 ELEC-5.4.1 Supply & Fixing of D.O.L Starter 250V,
Single phase, 50Hz. With SS enclouser
comprising of contactor with bi-metalic
relay with necessary push buttons, etc.,
complete.
Makes: Siemens / Crompton / L&T / BCH. 1 No 780.00
584 ELEC-5.4.2 Supply & Fixing of D.O.L Starter 415V, 3
phase, 50Hz.. enclosed with no volt coil and
overload protection with necessary
materials, etc., complete suitable upto
7.5.HP.
585 ELEC-5.4.4 Supply & Fixing of D.O.L Starter 415V, 3
phase, 50Hz.. enclosed with no volt coil,
overload protection and single phase
preventor , etc., complete suitable upto
10.0.HP.
262
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
5.5 SINGLE PHASE SUBMERSIBLE MOTOR
PUMP SETS
586 ELEC-5.5.1 Supply and Transportation of 0.75HP 8
Stage single phase ISI submersible motor
pumpset suitable for 4" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI 1 No 14700.00
/ KSB / Aryan Varsha
Makes: Varuna / Flowell / Waterman / 1 No 14000.00
Techno / Mahavir / Unitech / Fitwell / Lubi /
Falcon / Sterling.
Falcon / Sterling.
Falcon / Sterling.
Falcon / Sterling.
Falcon / Sterling.
5.6 THREE PHASE SUBMERSIBLE MOTOR
PUMP SETS.
263
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
591 ELEC-5.6.1 Supply and Transportation of 3.00HP Star
rated 5-10 Stage Three phase ISI
submersible motor pumpset suitable for 6"
Bore well.
Falcon / Sterling.
Bore well.
Falcon / Sterling.
Bore well. Makes: Kirloskar / Crompton /
Texmo / CRI / KSB / Aryan Varsha
Falcon / Sterling.
594 ELEC-5.6.4 Supply and Transportation of 7.5.00HP
Star rated 5-10 Stage Three phase ISI
Falcon / Sterling.
Falcon / Sterling.
264
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Bore well.
Falcon / Sterling.
597 ELEC-5.6.7 Supply and Transportation of 10.00HP,
Bore well.
Falcon / Sterling.
598 ELEC-5.6.8 Supply and Transportation of 10 HP 5 Star
rated, 12-16 Stage Three phase ISI
Bore well.
Falcon / Sterling.
599 ELEC-5.6.9 Supply and Transportation of 10 HP 5 Star
rated,20-24 Stage Three phase ISI
Bore well.
Falcon / Sterling.
Bore well.
Falcon / Sterling.
265
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Falcon / Sterling.
602 ELEC-5.6.12 Supply and Transportation of 15HP 5 Star
Bore well.
Falcon / Sterling.
Falcon / Sterling.
5.7 SINGLE PHASE OPEN WELL
SUBMERSIBLE MOTOR PUMP SETS.
604 ELEC-5.7.1 Supply and Transportation of 1.00HP
Single phase open well ISI submersible
motor pumpset.
Falcon / Sterling.
motor pumpset.
Falcon / Sterling.
266
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
motor pumpset.
Falcon / Sterling.
5.8 THREE PHASE OPEN WELL
SUBMERSIBLE PUMP SETS.
Three phase open well ISI submersible
motor pumpset.(65x50) Makes: Kirloskar /
Crompton / Texmo / CRI / KSB / Aryan
Varsha
Falcon / Sterling.
Varsha
Falcon / Sterling.
Varsha
Falcon / Sterling.
Varsha
267
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Falcon / Sterling.
5.9 SINGLE PHASE MONO BLOCK MOTOR
PUMP SETS.
611 ELEC-5.9.1 Supply and Transportation of 0.5HP Single
phase, 2880 RPM 50 Hz ISI Mono block CI
body motor pumpset (25x25mm). Makes:
Kirloskar / Crompton / Texmo / CRI / KSB /
Aryan Varsha
Falcon / Sterling.
phase ISI Mono block CI body motor
pumpset (25x25mm). Makes: Kirloskar /
Varsha
Falcon / Sterling.
phase ISI Mono block CI body motor
pumpset (32x25mm). Makes: Kirloskar /
Varsha
Falcon / Sterling.
Single phase ISI self priming Mono block
IP44 motor pumpset (40x40mm). Makes:
Aryan Varsha
Falcon / Sterling.
268
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Three phase ISI self priming Mono block
Aryan Varsha
Falcon / Sterling.
Aryan Varsha
Falcon / Sterling.
Aryan Varsha
Falcon / Sterling.
5.10 CONTROL PANEL BOARD FOR
MOTORS
618 ELEC-5.10.1 Supply and Transportation of control panel 1 No 4800.00
for single phase submersible motors up to 3
HP @ 220V 50Hz operating range between
80 to 240V including supply and fixing of
Direct - on - Line LTLK / SIEMENS /
CROMPTON make Volt meter and
Ammeter with starting and running
capacitors assembled with ISI mark
contactors and fitted with Legrand make ISI
mark MCB etc., complete.
5.11 REPAIRS TO MOTORS AND

REWINDING, BEARINGS
619 ELEC-5.11.1 Bearing of approved make for electric motor 1 No 179.00
single phase / 3 phase AC upto 1 HP of all
types.
269
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
single phase / 3 phase AC upto 2 to 3 HP
of all types.
single phase / 3 phase AC upto 5 to 7.5 HP
of all types.
single phase / 3 phase AC upto 10 to 12.5
HP of all types.
623 ELEC-5.11.5 Bearing of approved make for electic motor 1 No 489.00
single phase / 3 phase AC upto 15 to 20
HP of all types.
624 ELEC-5.11.6 Bearing of table / cabin / pedestal / ceiling / 1 No 84.00
exhaust fan complete with alignment of
shaft and tested.
625 ELEC-5.11.7 Bearing of bush / rubber / ring washers 1 No 40.00
complete with alignment of shaft and
tested.
626 ELEC-5.11.8 Capacitor of table / cabin / pedestal / ceiling 1 No 38.00
/ exhaust fan complete.
627 ELEC-5.11.9 EICHER model 11:10 with 100 H.P. direct 1 No 795069.00
injestion 4 stroke engine with one spare
wheel 3800 mm cabin high deck with jangla
(full body) (4 wheeler) for generator
5.12 ACCESSORIES OF MOTORS
628 ELEC-5.12.1 Supply, Transportation and fixing of suitable
pump guard set (2Nos SS), Flanges set (2
Nos) to protect and safe guard the pump
and Motor from vibrations while starting and
switching of the pumpset.
a OD 42mm 1 No 380.00
b OD 48mm 1 No 450.00
c OD 60mm 1 No 650.00
d OD 75mm 1 No 780.00
e OD 80mm 1 No 1000.00
629 ELEC-5.12.2 Supply, Transportation and fixing of
seamless cast iron adopter assembly (Two
Nos at bottom of the pipe to coupling to the
pump set and the other at top end of the
pipes) for installing the pump set with pipes
including cost and conveyance of all
materials, taxes etc., complete.
a OD 42mm 1 No 1100.00
b OD 48mm 1 No 1300.00
c OD 60mm 1 No 1490.00
d OD 75mm 1 No 1600.00
e OD 80mm 1 No 2000.00
270
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
following galvanised GI bends heavy duty
with threaded at both ends for installing the
pump set including cost and conveyance of
all materials, taxes etc., complete.
a 50mm dia 90 degree bend with length of 1 No 175.00
20cm (Center to face)
b 65mm dia 90 degree bend with length of 1 No 240.00
c 80mm dia 90 degree bend with length of 1 No 300.00
following MS threaded Flanges 2 Nos with
nuts and bolts including cost and
conveyance of all materials, taxes etc.,
complete.
a 50mm dia MS flanges set (2 Nos) 150mm 1 No 209.00
dia OD, 12mm thick each flange with
required dia bolts and nuts.
b 65mm dia MS flanges set (2 Nos) 165mm 1 No 350.00
c 80mm dia MS flanges set (2 Nos) 175mm 1 No 380.00
632 ELEC-5.12.5 Supply, Transportation and fixing of MS
Clamp set with nuts and bolts.
a 50mm dia, 450mm length, 12mm thickness 1 No 200.00
and 75mm wide with required nuts and
bolts.
b 65mm dia, 450mm length, 12mm thickness 1 No 300.00
bolts.
c 80mm dia, 450mm length, 12mm thickness 1 No 400.00
bolts.
d 150mm dia galvanised bore cover with bolts 1 No 150.00
and nuts.
e 150mm dia stainless steel bore cover with 1 No 300.00
bolts and nuts.
6.1 AIR CONDITIONERS
271
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
633 ELEC-6.1.1 Supply of split AC unit with high wall
mounted indoor unit and outdoor
condencing unit Hermetically sealed
compressor suitable for operation on 230V,
50Hz, 1Phase AC supply capable of
performing cooling dehumidifying air
circulating and filtering with cooling and
condensing units with 3.5 mts of copper
piping, insulation kit and 4 mts of 3 core
copper flexible chord , built-in stabilizer
(Voltage range 160- 264 volts) and
cordless remote control
1.5TR Split ACs
a 1.5 TR 3 Star capable of delivering 18000 1 No 42990.00
BTU/hr and above of makes Mitsubishi
SRIC18CS-S6
b 1.5 TR 3 Star capable of delivering 18000 1 No 39600.00
BTU/hr and above of makes Daikin FTE-M
or N Sereis / Carrier Novello / Blue Star
3HW18VB1 / Hitachi (Kazi+) / Voltas 183
PX-R.
c 1.5 TR 5 Star capable of delivering 18000 1 No 53490.00
BTU/hr and above of makes Mitsubishi
SRK 20 CSS-S6
d 1.5 TR 5 Star capable of delivering 18000 1 No 46990.00
BTU/hr and above with operating on
refrigerant R-32 / R-410A with COP not
less than 3.6 w/w makes Daikin
FTF50QRV16 or its equivalent model of
Carrier / Blue Star 3HU34JCFU.
1.8TR-2.1TR Split ACs
e 1.8 / 2.0 TR 3 Star capable of delivering 1 No 50250.00
21600 BTU/hr and above with operating on
refrigerant R-32 / R-22 with COP not less
than 3.25 w/w makes Daikin FTC60QRV16
or its equivalent make of Carrier / Blue Star
f 2.0 TR 4 Star capable of delivering 21600 1 No 56490.00

refrigerant R-22 makes 'O' General.
g 2.0 TR 5 Star capable of delivering 21600 1 No 54500.00
refrigerant R-22 makes Carrier or
equivalent in Blue Star / Voltas.
h 1.8 / 2.0 TR 4 Star capable of delivering 1 No 59990.00
than 3.4 w/w makes Daikin FTF60QRV16
or its equivalent of Mitsubishi
272
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
6.2 INVERTER SPLIT AC UNITS (COOLING
ONLY)
634 ELEC-6.2.1 Supply of INVERTER Model Cool type
split AC unit with high wall mounted Single
Split indoor unit and outdoor condencing
unit Hermetically sealed compressor
suitable for operation on 230V, 50Hz,
1Phase AC supply capable of performing
Heat cool dehumidifying air circulating and
filtering with cooling and condensing units
with 3.5 mts of copper piping, insulation kit
and 4 mts of 4 core copper flexible chord ,
built-in stabilizer (Voltage range 160- 264
volts) and cordless remote control
a 1.5 TR capable of delivering 18000 BTU/hr 1 No 53550.00

and above with operating on refrigerant R-
410 makes O General model No.
ASGA18JCC / Toshibha Model No. RAS-
18N3KCV-IN
b 1.5 TR capable of delivering 18000 1 No 58990.00
than 3.8 w/w makes 'Daikin Model No.
FTKM50QRV16 or its equivalent of
Mitsubishi
c 1.8 TR capable of delivering 21600 BTU/hr 1 No 65910.00
410 / R-32 with COP not less than 3.6 w/w
makes Daikin FTKM60QRV16 or its
equivalent of Thosibha
d 2.0 TR capable of delivering 24000 BTU/hr 1 No 69295.00
410 makes 'O' General Model No.
ASGA24JCC / Blue Star Model No.
HNHW22CBF
6.3 CASSETTE TYPE AC UNITS
635 ELEC-6.3.1 Supply of Cassette type AC unit with
ceiling mounted indoor unit and outdoor
condencing unit Hermetically sealed
compressor suitable for operation on AC
supply capable of performing cooling
dehumidifying air circulating and filtering
with cooling and condensing units etc
complete with Wireless remote controller,
but without refrigerent piping and cable.
a Single Phase R-22 Makes: 2.2TR Daikin 1 No 82000.00

FHC28EXVI / R28CGXVI 2.0TR 'O' Genral
AUG25AB
273
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
b 3.0TR Three Phase capable of delivering 1 No 130090.00
refrigerant R-22 makes Makes: 'O' Genral
c 3.5TR Three Phase capable of delivering 1 No 137940.00
refrigerant R-22 Makes: 'O' General
d 3.3TR Three Phase capable of delivering 1 No 131800.00
refrigerant R-22 Makes: Daikin
FHC40EXVI / R40DGXY1
e 3.5TR Three Phase Makes: Carrier / Blue 1 No 125000.00
Star
f 4.1TR Three Phase capable of delivering 1 No 150970.00
refrigerant R-22 Makes: Daikin
FHC50EXV1 / R50DGXY1 / 'O' Genral
g 4.0TR Three Phase capable of delivering 1 No 115000.00
refrigerant R-22 Makes: Carrier / Blue Star
h 3.0TR Three Phase capable of delivering 1 No 116300.00
refrigerant R-410 Makes: Carrier / Blue
Star.
i 3.0TR Three Phase capable of delivering 1 No 155170.00
refrigerant R-410 Makes: Toshibha / O
General (Inverter Technology)
j 4.0TR Three Phase capable of delivering 1 No 133000.00
refrigerant R-410 Makes: Carrier / Blue Star
k 4.0TR Three Phase capable of delivering 1 No 168190.00
refrigerant R-410 Makes: Toshibha / O
General (Inverter Technology)
6.4 TOWER MODEL TYPE AC UNITS
636 ELEC-6.4.1 Supply of Slim line / Tower Model/Verticool
type split AC unit with indoor unit and floor
mounted outdoor condencing unit
Hermetically sealed Scroll compressor
suitable for operation on AC supply capable
of performing cooling dehumidifying air
circulating and filtering with cooling and
condensing units etc complete with
cordless remote control
a 3.0TR Three Phase capable of delivering 1 No 80000.00

refrigerant R-22 Makes: Voltas
274
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
b 3.5TR Three Phase capable of delivering 1 No 82500.00
refrigerant R-22 Makes: Blue Star
6.5 INVERTOR MODEL HEAT COOL SPLIT
AC'S
637 ELEC-6.5.1 Supply, transportation of 1.5 TR capacity 1 No 58380.00
( HEAT and COOL) high wall mounted
indoor evaporator unit and outdoor
condencing unit with Heat pump, cord less
remote control and hermetically sealed
rotary compressor operating on refrigerent
R-410A suitable for operation on 230V,
50Hz, single phase A.C supply, capable of
performing of capable of performing of
cooling capacity 5.25KW and above and
heating capacity 5.28 KW and above,
Running current in cooling mode less than
7.19 Amps, & in Heating mode less than
6.53 Amps , Power Consumption in Cooling
mode not more than 1635 W and in heating
mode not more than 1490 W co-efficient of
performance in cooling mode not less than
3.21 & in heating mode not less than
3.54,dehumidifing Aircirculating and
filtering with cooling and condensing unit
duly insulated and 3 core copper flexible
chord of required length etc with 2 years
comprehensive warranty and 5 years
warranty on compressor etc complete.
Make: Diakin Model No FTYN50JXVI or its
equivalent model of Toshiba / Mitsubuishi /
O General.
275
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
638 ELEC-6.5.2 Supply, transportation of 1.8 / 2.0 TR 1 No 68838.00
capacity , ( HEAT and COOL) high wall
mounted indoor evaporator unit and
outdoor condencing unit with Heat pump,
cord less remote control and hermetically
sealed rotary compressor operating on
refrigerent R-410A suitable for operation on
230V, 50Hz, single phase A.C supply,
capable of performing of cooling capacity
6.01KW and above and heating capacity
6.15 KW and above, Running current in
cooling mode less than 8.26 Amps, & in
Heating mode less than 7.99 Amps ,
Power Consumption in Cooling mode not
more than 1870W and in heating mode not
more than 1800 W, co-efficient of
performance in cooling mode not less than
3.21 & in heating mode not less than 3.40,
dehumidifing Aircirculating and filtering
with cooling and condensing unit duly
insulated and 3 core copper flexible chord
of required length etc with 2 years
comprehensive warranty and 5 years
warranty on compressor etc complete.
Make: Diakin Model No FTYN60JXVI or its
equivalent model of Toshiba / Mitsubuishi /
O General
6.6 REPAIRS TO AIR CONDITIONERS
639 ELEC-6.6.1 Supply, Fabrication of 1set MS bracket 1 Set 1000.00
suitable for fixing out door unit of split AC
unit.
640 ELEC-6.6.2 Providing 2 runs of Copper tubes for 1 Mtr 1000.00
suction and liquid between indoor and
outdoor unit for split/Casseete Air-
Conditioner including foaming etc.,
complete.
1.3/4" x 3/8"
2. 5/8" x 1/4"
3. 1/2" x 1/4"
641 ELEC-6.6.3 Supply of 1.0 / 1.5 Ton brand new Rotary 1 No 8150.00
type sealed compressor.
642 ELEC-6.6.4 Supply of 2.0 Ton brand new Rotary type 1 No 9250.00
sealed compressor.
643 ELEC-6.6.5 Multi speed Fan Motor suitable for 1.0 / 1.5 1 No 1590.00
/ 2.0 Ton Window A.C.Unit of makes
Crompton / AU.
644 ELEC-6.6.6 Fan motor capacitor 6 mfd by new 1 No 156.00
capacitor for A.C machine of 1.0 1.5 / Ton
Capacity.
645 ELEC-6.6.7 Thermostat switch suitable for 1.0 / 1.5 / 2.0 1 No 410.00
Ton A.C.Unit.
276
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
646 ELEC-6.6.8 Starting capacitor of 80 to 120 mfd. by new 1 No 200.00
approved make capacitor suitable for
compressor motor of 1.0 / 1.5 Ton A.C.
Unit.
647 ELEC-6.6.9 Running capacitor of 36 mfd by new 1 No 242.00
approved make capacitor suitable for
compressor motor of 1.0 / 1.5 Ton A.C.Unit.
648 ELEC-6.6.10 Relay by approved make having pickup 1 No 225.00

voltage 220 Volts and dropout voltage 120
Volts suitable for 1.0 / 1.50 Ton A.C. Unit.
649 ELEC-6.6.11 Filter and capillary tube including welding 1 No 485.00
etc., complete for 1.0 / 1.5 / 2.0 Ton
A.C.Unit.
650 ELEC-6.6.12 Air filter suitable for 1.50 Ton Window 1 No 225.00
A.C.Unit P.V.C. / NYLON.
651 ELEC-6.6.13 Air filter suitable for 1.50 Ton Split A.C.Unit 1 No 475.00
P.V.C. / NYLON.
652 ELEC-6.6.14 Rewiring the entire Window type 1.50 Ton 1 No 325.00
A.C.unit with 2.5 Sq.mm Flexible copper
cable and putting the same in working
conditions.
653 ELEC-6.6.15 Complete servecing of 1.0 - 2.0 TR AC unit 1 No 400.00
with cleaning the condensor cooling Coil
etc., by blower and oiling the Fan Motor and
Cleaning all parts and putting the machine
in working condition.
654 ELEC-6.6.16 Fan blade for 1.0 / 1.5 Ton A.C.Machine. 1 No 560.00
655 ELEC-6.6.17 Grill of 1.0 / 1.5 ton A.C. Machine (for 1 No 427.00
assembled Units).
656 ELEC-6.6.18 Grill of 1.0 / 1.5 ton A.C. Machine of 1 No 1700.00
branded units.
657 ELEC-6.6.19 Rotary / Selector switch for window AC. 1 No 115.00
658 ELEC-6.6.20 Flushing the line, leak testing, leak 1 No 1500.00
stopping, vaccumming, dehydrating and
charging the gas in the refrigeration system
for 1.0/ 1.5 /2.0 Ton Window A.C.Unit.
659 ELEC-6.6.21 Flushing the line, leak testing, leak 1 No 2100.00
stopping, vaccumming, dehydrating and
charging the gas in the refrigeration system
for 1.5 /2.0 Ton Split A.C.Unit.
660 ELEC-6.6.22 Spray painting of Refrigerator using good 1 No 720.00
quality paint after scraping the surface etc.
661 ELEC-6.6.23 Sealed compressor of 1/8 HP suitable for 1 No 3100.00
165 to 185 Ltrs. Capacity Refrigerator.
662 ELEC-6.6.24 Sealed compressor of 1/6 HP suitable for 1 No 3750.00
285 / 310 Ltrs. Capacity Refrigerator.
277
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
663 ELEC-6.6.25 Supply of fan motor by new 1/10 t0 1/12 1 No 1590.00
H.P 1250 RPM fan motor for Water Cooler
of 80-150 Ltrs.
664 ELEC-6.6.26 Gun metal Bush for fan motor. 1 No 125.00
665 ELEC-6.6.27 Resistance type regulator for ceiling fans 1 No 40.00
900/1200/1400mm sweep complete erected
on existing board.
666 ELEC-6.6.28 Installation of Split Air Conditioners. 1 No 1500.00
667 ELEC-6.6.29 Removing of existing Split Air Conditioners 1 No 400.00
without damaging to copper pipe.
668 ELEC-6.6.30 Installation of Cassette type Split Air 1 No 3000.00
Conditioners.
669 ELEC-6.6.31 Installation of Tower type Split Air 1 No 2500.00
Conditioners.
670 ELEC-6.6.32 Supply, Fabrication of 1set MS bracket 1 Set 2000.00
suitable for fixing out door unit of Casseete
AC unit.
complete.
1.7/8" x 1/2"
complete.
1. 1 1/8" x 5/8"
6.7 EVAPORATIVE AIR COOLING SYSTEM
673 ELEC-6.7.1 Supply of single phase evaporative air 1 No 110000.00
cooling unit with a capacity of 8000 CFM
consisting cabinet and water tank made of
polypropylene material, blower water pump
of 40W, single phase 1.20 KW motor axial
type fan with variable speed, 20 micron
filteration, noise level less than 78 dBA with
auto cleaning and water lack protection etc
complete. Makes: Cool Breeze / Breeze Air
278
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
674 ELEC-6.7.2 Supply of single phase evaporative air 1 No 130000.00
cooling unit with a capacity of 11000 -
12000 CFM consisting cabinet and water
tank made of polypropylene material,
blower water pump of 40W, single phase
1.20 KW / 1.5 KW motor axial type fan with
variable speed, 20 micron filteration, noise
level less than 78 dBA with auto cleaning
and water lack protection etc complete.
Makes: Cool Breeze / Breeze Air
675 ELEC-6.7.3 Supply of three phase evaporative air 1 No 180000.00

cooling unit with a capacity of 17000 CFM
consisting cabinet and water tank made of
polypropylene material, blower water pump
of 60W, three phase, 3.0 KW motor, axial
type fan with 2 speed, 20 micron filteration,
noise level less than 78 dBA with auto
cleaning and water lack protection etc
complete. Makes: Cool Breeze / Breeze Air
676 ELEC-6.7.4 Supply, Fabrication and errection of GI 1 Sft 81.90
ducting of 24 guage with necessary GI / MS
supports. Makes : Tata / Zindal
677 ELEC-6.7.5 Supply and fixing of 40mm thick thermocole 1 Sft 75.00
insulation of 16 kg density with GI mesh
and 12mm thick cement mortor plastering
for out door unit.
678 ELEC-6.7.6 Supply and fixing of 40mm thick glasswool 1 Sft 60.00
of 24 kg density with alluminium foil
insulation for indoor duct.
679 ELEC-6.7.7 Supply and fixing of alluminium powder 1 Sft 675.00
coated grill with volume control dampers.
680 ELEC-6.7.8 Supply and fixing of angular iron frame with 1 No 4800.00
2 coats of zincromat red oxide for
installation of air cooling unit.
681 ELEC-6.7.9 Installation and commissioning charges for 1 No 4000.00
air cooling unit.
6.8 STABILIZERS
682 ELEC-6.8.1 Supply of 0.5 KVA Stabilizer
Makes : V-Guard / Real Guard / Uni Stab / 1 No 990.00
ITL.
Make : Keeline / Soft Line / Capri. 1 No 810.00
683 ELEC-6.8.2 Supply of 1.0 KVA Stabilizer.
ITL.
ITL.
279
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
ITL.
ITL.
7.1 SWAGED POLES / OCTOGONAL POLES,
GARDEN POSTS AND ACCESSORIES
687 ELEC-7.1.1 Fabrication, supply and transportation of all 1 Kg 71.00

sizes swaged poles up to site confirming to
IS 2713 / 1980 specifications. The pole
should be painted with primary coat of red
oxide and black bituminous paint up to
ground level with base plate, including cost
of all materials etc., complete.(Rate per K.
G)
688 ELEC-7.1.2 Fabrication and Supply of M.S. Poles for 1 Kg 65.00

garden posts with 'B' class 60.25mm outer
dia with base plate and suitable pole cap
including cost and conveyance of all
material including fixing of luminaire and
labour charges etc., complete. (Rate per K.
G)
689 ELEC-7.1.3 Supply of different sizes of M. S. Pipe 1 Kg 65.00

brackets (Rate per K.G)
7.2 OCTOGONAL POLES
690 ELEC-7.2.1 Fabrication, Transportation and supply of
hot-dip galvanized Octogonal Pole with
BSEN - 10025 grade S 355 JO steel plate
for shaft, IS 2062 for base plate with door
opening arrangement, including the supply
of suitable boards with bakelite sheet and
MCB's as per IS specification suitable to
withstand the wind speed of 180 KMPH for
7.50 Mtrs height Pole having dimensions
Bottom 130 mm,. Top 70mm with 3mm
thick, base plate 220 x 220 x 12mm and 4
Nos of M20 x 700 long 'J' bolts along with
template.
Makes: Bajaj / Valmont / TRANSRAIL. 1 No 10647.00

Makes : Surya / LAASMA 1 No 9147.00
280
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
9 Mtrs height Pole having dimensions
thick, base plate 260 x 260 x 16mm and 4
template.

10 Mtrs height Pole having dimensions
thick, base plate 275 x 275 x16mm and 4
template.

12 mtrs height Pole having dimensions
Bottom 200mm, Top 90mm with 4mm
thick, base plate 320 x320 x20mm and 4
template.

7.3 BRACKETS
281
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
694 ELEC-7.3.1 Fabrication, Transportation and supply of 1 No 1215.00
1.0 Mtr Length Single Arm standard Bracket
made with MS galvanized 50mm dia Pipe.

1.50 Mtr Length Single Arm standard
Bracket made with MS galvanized 50mm
dia Pipe.
of 1.5mtrs sword type decorative Single
arm bracket with dooms complete with all
accessories with MS galvanized 50mm dia
Pipe.
1.5mtrs decorative galvanized Single arm
bracket with PU paint complete with all
Pipe.
698 ELEC-7.3.5 Fabrication, Transportation and supply of 1 1 No 1500.00
Mtr length Double Arm standard Bracket
made with MS galvanized 50mm dia Pipe.
1.50 Mtr length Double Arm standard
Bracket made with MS galvanized 50mm
dia Pipe.
of 1.5mtrs sword type decorative double
arm bracket with dooms either sides
complete with all accessories with MS
galvanized 50mm dia Pipe.
1.5mtrs decorative galvanized double arm
bracket with PU paint complete with all
Pipe.
7.4 HIGH MAST POLES
282
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
702 ELEC-7.4.1 Fabrication, transportation and supply of 12
Mtrs Polygon High Mast with single section
of 3mm thick of Bottom 360mm and Top
150mm dia with BSEN - 10025 grade S 355
JO steel plate for shaft, IS 2062 for base
plate, having a base plate of size 520mm
dia 16mm thick with its accessories. Mast
shall be in single section for 12 Mtrs and 2
sections for 16 and 20 Mtrs. Mast shall be
hot dip galvanized and suiatble for wind
velocity of 180 KMPH as per IS 875 part 3
including head frame, 2 point suspension
system with steel rope 6mm dia (7/19)
construction double drum winch / power
tool operating speed of 900 RPM, and
necessary cable trailer connections and
single speed motor with M 24 x 800 mm
foundation bolts of required quantity,
suitable for 6 luminaires with GLS type
aviation twin lamp.
Mtrs Polygon High Mast with two sections
of Bottom 4mm thick and Top section with
3mm thick with GLS type aviation lamp of
Bottom 360mm and Top 150mm dia with
for shaft, IS 2062 for base plate, having a
base plate of size 560mm dia 25mm thick
with its accessories. Mast shall be in 2
sections and should be hot dip galvanized
and suiatble for wind velocity of 180 KMPH
as per IS 875 part 3 including head frame, 2
point suspension system with steel rope
6mm dia (7/19) construction double drum
winch / power tool operating speed of 900
RPM, and necessary cable trailer
connections and single speed motor with
M 24 x 800 mm foundation bolts of required
quantity with GLS type aviation twin lamp
283
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Mtrs Polygon High Mast with two sections
of Bottom 4mm thick and Top section with
3mm thick of Bottom 410mm and Top
150mm dia with BSEN - 10025 grade S 355
JO steel plate for shaft, IS 2062 for base
plate, having a base plate of size 570mm
dia 25mm thick with its accessories. Mast
shall be in 2 sections and should be hot dip
galvanized and suiatble for wind velocity of
180 KMPH as per IS 875 part 3 including
head frame, 2 point suspension system with
steel rope 6mm dia (7/19) construction
double drum winch / power tool operating
speed of 900 RPM, and necessary cable
trailer connections and single speed motor
with M 24 x 800 mm foundation bolts of
required quantity with GLS type aviation
twin lamp.
7.5 FEEDER PILLER BOX
705 ELEC-7.5.1 Supply and fixing of suitable feeder piller 1 No 28884.00
box made with 14 SWG CRCA sheet
including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 40A TP MCB,
6 Nos SP MCB's, din channel, 6 Sqmm 3
core copper cable for invidual light control,
contactor, connectors and provision for
energy meter etc., complete for finished
item of work.
706 ELEC-7.5.2 Supply and fixing of suitable feeder piller 1 No 30473.00

box made with 14 SWG CRCA sheet
including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 63A TP MCB,
8 Nos SP MCB's, din channel, 6 Sqmm 3
core copper cable for invidual light control,
connectors and provision for energy meter
etc., complete for finished item of work.
7.6 ERRECTION OF HIGH MAST POLES
284
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
707 ELEC-7.6.1 Earth work exacavation with a approximate 1 No 28073.00
quantity of 4.0 Cum for errection of 12 Mtrs
high mast and refilling with a quantity of
0.53 Cum of PCC 1:4:8, 1.50 Cum M 20
grade concrete and (80 Kgs) reinforced
steel of 12mm / 10mm / 8mm, Soil bearing
capacity of 10 T/Sqm, Anchor plate with
cost and conveyance of all above materials
including labour charges for errection of
High Mast and Carraige etc complete.

0.65 Cum of PCC 1:4:8, 2.60 Cum M 20

0.75 Cum of PCC 1:4:8, 3.60 Cum M 20
7.7 CONICAL POLES
285
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
710 ELEC-7.7.1 Fabrication,transportation and supply of
MS hot dip galvanized 9.0 Mtrs long
Conical poles with 3mm thick HT steel plate
with a bottom 173mm dia and top 75mm
dia, base plate of size
275mmx275mmx16mm thick welded to
bottom of pole, terminal box with door size
of 500mmx100mm with all accessories
connector and fuse base and a fixing
arrangements for advertisements holdings,
foundation bolts with washers and nuts 4
sets. including S&F of 1.0 mtrs C type
decorative single arm with painted bracket
with dooms either sides complete with all
accessories as per the requirements at site
and as per the directions of field engineers
during execution for finished item of work.

711 ELEC-7.7.2 Fabrication,transportation and supply of
MS hot dip galvanized 10.0 Mtrs long
Conical poles with 3mm thick HT steel plate
with a bottom 184mm dia and top 75mm
dia, base plate of size
275mmx275mmx16mm thick welded to
bottom of pole, terminal box with door size
of 500mmx100mm with all accessories
connector and fuse base and a fixing
arrangements for advertisements holdings,
foundation bolts with washers and nuts 4
sets. including S&F of 1.5 mtrs C type
decorative Double arm with painted
bracket with dooms either sides complete
with all accessories as per the requirements
at site and as per the directions of field
engineers during execution for finished item
of work.

7.8 THERMO PLASTIC POLE BOXES

712 ELEC-7.8.1 Supply of following sizes thermo plastic
pole boxes IP 65 protection.
Make : Hensel / Sintex
a 300X150X170 1220.00
b 300X300X170 1750.00
c 300X450X170 2385.00
286
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
d 300X600X170 2830.00
7.9 FOUNDATION AND ERRECTION
CHARGES OF POLES
713 ELEC-7.9.1 Erection charges for 7.50 Mts long 1 No 3200.00
Octagonal pole on bridge kerb portion
(R.C.C). with 4 Nos 8" Anchor bolts/
M20xsuitable "J" type bolts etc duly drilling
holes to RCC slab and with V.C.C. M.15
concrete for base concreting up to a height
of 8" with necessary Reinforcement work
etc. including cost and con veyance of all
material and all labour charges etc.
complete as directed by the department
officers.
714 ELEC-7.9.2 Foundation and erection charges with 1 No 4500.00

special T&P, for 7.50 Mtrs long Octagonal /
Conical pole duly erecting on base plate
duly providing 4 Nos foundation bolts with
nuts with providing of
0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc
work vibrated concreting mixing with
necessary steel (10kgs) reinforcement as
directed by the field engineers during
execution including all labour charges and
cost and conveyance of materials etc.
complete.

special T&P, for 9.00Mtrs / 10Mtrs long
Octagonal / Conical pole duly erecting on
base plate duly providing 4 Nos foundation
bolts with nuts with providing of
complete.
287
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
special T&P, for 12Mtrs long Octagonal /
Conical pole duly erecting on base plate
duly providing 4 Nos foundation bolts with
nuts with providing of
complete.
7.10 G R P POLES
717 ELEC-7.10.1 Supply and transportation of following glass
reinforced polymer (GRP) composite type
Conical pole with single arm bracket of
length 1Mtr and internal junction box
including labour charges etc., complete.
Makes: Bajaj / Kemrock / Sumip.
a 3.00 Mtrs height, Bottom dia 143mm, Top 1 No 8908.00
76mm, AV thickness 6mm and to withstand
maximum wind velocity 155Km/Hr
b 4.00 Mtrs height, Bottom dia 143mm, Top 1 No 11168.00

c 6.00 Mtrs height, Bottom dia 143mm, Top 1 No 14275.00

d 8.00 Mtrs height, Bottom dia 193mm, Top 1 No 18795.00

e 10.00 Mtrs height, Bottom dia 227mm, Top 1 No 27268.00

718 ELEC-7.10.2 Supply and transportation of base bracket

suitable for glass reinforced polymer (GRP)
composite type pole including labour
charges etc., complete.
Makes : Bajaj / Kemrock / Sumip.
a For 3.00 Mtrs Pole 1 No 1650.00
b For 4.00 Mtrs Pole 1 No 1650.00
c For 6.00 Mtrs Pole 1 No 1980.00
d For 8.00 Mtrs Pole 1 No 2310.00
288
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
e For 10.00 Mtrs Pole 1 No 5500.00
7.11 CONTROL PANEL BOARD
719 ELEC-7.11.1 Fabrication and erection of 14SWG CRCA 1 Sq 4340.00
sheet steel enclosure for power control Mtr
cubicle panel / boxes etc., including cutting,
bending drilling, welding and reveting etc.,
complete with cleaning with 7 tank process
and painting with powder coating including
cost and conveyance of all materials and
labour charges.
720 ELEC-7.11.2 Fabrication and erection of 16 SWG CRCA 1 Sq 4030.00

labour charges.
721 ELEC-7.11.3 Fabrication and erection of 18SWG CRCA 1 Sq 3565.00

labour charges.
7.12 METERING EQUIPMENT

722 ELEC-7.12.1 Supply and erection of 0-415V volt Digital
meter on exisiting box / panel board
including connections etc., complete.
MAKES : CONZERVE / ELMEASURE / 1 No 2500.00
L&T / SEIMENS / HPL.
723 ELEC-7.12.2 Supply and erection of 0-415V volt Analog
meter on exisiting box / panel board
724 ELEC-7.12.3 Supply and erection of 0-100 / 200 / 400 /
600 /1000 Digital Ammeter of size
96x96mm on existing box / panel board
725 ELEC-7.12.4 Supply and erection of 0-100 / 200 / 400 /
600 /1000 Analog Ammeter of size
289
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
726 ELEC-7.12.5 Supply and erection of Digital frequency
meter on existing box / panel board
727 ELEC-7.12.6 Supply and erection of Digital power factor
meter, 3 phase, 4 wire balanced or
unabalanced load 5A, 415V of size
728 ELEC-7.12.7 Supply and erection of L.T. 3phase Digital
multifunction energy meter with 3 lines LCD
display for measuring all the parameters
(voltage / Current / Power / frequency /
power factor / kw / kwh / KVAR/ KVARH/)
on existing box panel board including
connections etc., complete.

729 ELEC-7.12.8 Supply and erection of selector switch for
voltmeter / Ammeter on the existing box /
panel including connections etc., complete.
Makes : L&T / C&S / SALZAR / HPL MAKE. 1 No 175.00
730 ELEC-7.12.9 Supply and erection of LED indicator lamps

on the existing box / panel board.
Makes : L&T / C&S / SALZAR / HPL MAKE. 1 No 135.00
731 ELEC-7.12.10 Supply and erection of LT current

transformer with bar primary 100/5A to
1000 / 5A ratio in the existing box / panel
MAKE : KAPPA 1 No 450.00
732 ELEC-7.12.11 Supply and fixing of single phase Electronic
energy Meter,240V AC,50 HZ as per
IS13010 up to 40A range with 200% over
load capacity complete with connections
etc., complete on the existing board.
Makes : CONZERVE / ELMEASURE / 1 No 1050.00

MECO / HPL / HAVELLS.
290
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
733 ELEC-7.12.12 Supply and fixing of three phase Electronic
energy Meter, 415V AC,50 HZ as per
IS13010 up to 40A range with 200% over
load capacity complete with connections
etc., complete on the existing board.
Makes : CONZERVE / ELMEASURE / 1 No 3037.00
MECO / HPL / HAVELLS.
734 ELEC-7.12.13 Supply and fixing of 8 Stage APFC Relay
with connection etc complete.
Makes : L&T / Siemens / EPCOS / 1 No 13600.00
Schneider / Elmeasure
735 ELEC-7.12.14 Supply and fixing of 14 Stage APFC Relay
with connection etc complete.
Makes : L&T / Siemens / EPCOS / 1 No 16900.00
Schneider / Elmeasure
7.13 SUB STATION EQUIPMENT
736 ELEC-7.13.1 Carryout routine maintenance, servicing 1 No 4000.00
and testing of 630A to 1000A L.T.ACB by
cleaning fixed contacts, moving contacts
and arcchutes including servicing and
putting the ACB in perfect working condition
after detting all relay and ON, OFF
mechanism etc done with only
manufacturing companies
737 ELEC-7.13.2 Carryout routine maintenance and servicing 1 No 2500.00

of LT.Cubical pannel board having
approximately 15 to 22 Nos of switches
cleaning with power brower and servicing
the contacts, tightning the connection of
incoming and outgoing cables, and clicking
the operating machanism for smooth
functioning of switches and putting them in
smooth working condition.
738 ELEC-7.13.3 Routine maintenance of transformer in 1 No 4350.00

operation covering insulation resistance oil,
break down strength. Reconditioning /
replacement of silicazel, cleaning of
transformer and topping upto oil level if
required (extra cost will be paid for oil).
739 ELEC-7.13.4 Testing of Transformer oil for dielectric 1 No 500.00
breakdown strength.
740 ELEC-7.13.5 Removing the existing transformer from the 1 No 2500.00
plinth / Pole and refixing the standby
transformer of following capacity including
connections etc., complete.- Upto 315 KVA
291
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
741 ELEC-7.13.6 Removing the existing transformer from the 1 No 3500.00
plinth / Pole and refixing the standby
transformer of following capacity including
connections etc., complete. -500 / 1000
KVA
742 ELEC-7.13.7 Replacing old and unserviceable gasket of 1 No 750.00
top cover plate of transformer having
following capacity. -Upto 315 KVA
top cover plate of transformer having
following capacity. -500 / 1000 KVA
H. T bushing for the following Transformer
capacity. -Upto 315 KVA
H. T bushing for the following Transformer
capacity. -500 / 1000 KVA
L.T bushing for the following transformer
capacity. Upto 315 KVA
L.T bushing for the following transformer
capacity. 500 / 1000 KVA
748 ELEC-7.13.13 Replacement the H/T / L. T burntout 1 Kg 590.00
winding coils of distribution transformer
including rewinding, varnishing and
vaccuming etc.,duly retaining the removed
burnt winding coils by the Contractor / Firm-
For copper coils
749 ELEC-7.13.14 Replacement the H/T / L. T burntout 1 Kg 390.00
winding coils of distribution transformer
including rewinding, varnishing and
vaccuming etc.,duly retaining the removed
burnt winding coils by the Contractor / Firm
- For aluminium coils
750 ELEC-7.13.15 Insulating HT / LT copper / aluminium coils 1 No 300.00
for Transformers.
751 ELEC-7.13.16 Painting with 2 coats Zinchromate red oxide 1 No 3000.00
duly scraping existing paint followed by 2
coats of hammerton grey paint etc.,
complete. -Upto 500 KVA
752 ELEC-7.13.17 Painting with 2 coats Zinchromate red oxide 1 No 4000.00
duly scraping existing paint followed by 2
coats of hammerton grey paint etc.,
complete. - 630 / 1000 KVA
753 ELEC-7.13.18 Replacing H.T bushing for distribution 1 No 350.00
Transformer by new one.
292
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
754 ELEC-7.13.19 Replacing H.T bushing metal parts for 1 No 380.00
distribution Transformer by new one.
755 ELEC-7.13.20 Replacing L.T bushing for distribution 1 No 165.00
Transformer by new one.- Upto 315 KVA
756 ELEC-7.13.21 Replacing L.T bushing for distribution 1 No 175.00
Transformer by new one for.- 500 / 1000
KVA
757 ELEC-7.13.22 Replacing L.T bushing metal parts for 1 No 300.00
distribution Transformer by new one for. -
100 KVA
250 / 315 KVA
500 KVA
1000 KVA
761 ELEC-7.13.26 Drying the repaired transformer with 1 No 3000.00
appropriate heat / air. -Upto 315 KVA
762 ELEC-7.13.27 Drying the repaired transformer with 1 No 4200.00
appropriate heat / air. -500 / 1000KVA
763 ELEC-7.13.28 Loading and Unloadng of transformer from 1 No 4500.00
site to Workshop or vice verse. -Upto 500
KVA
764 ELEC-7.13.29 Loading and Unloaidng of transformer 1 No 6800.00
from site to Workshop or vice verse. -630 /
1000 KVA
765 ELEC-7.13.30 Transformer oild tested as per IS-335 - 1 Ltr 120.00
1972 (per Ltr)
766 ELEC-7.13.31 Filteration of transformer oil as per ISS 1 Ltr 8.00
specifications filters to die electric strength
above 40 K. V at site. (per Ltr)
767 ELEC-7.13.32 Filteration of transformer oil as per ISS 1 Ltr 5.00
specifications filters to die electric strength
above 40 KV at workshop (per Ltr)
768 ELEC-7.13.33 Supply of MPP type heavy duty capacitor of
operating voltage not less than 480V and
losses not more than 0.35W per KVAR and
inrush current withstand capability 300
times the rated current.
Makes:L&T/Siemens/Schneider/Epcos. 1 KVAR 350.00
7.14 TRANSFORMERS
293
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
769 ELEC-7.14.1 Supply of 3 Phase, 50 Hz, oil immersed and
naturally cooled, outdoor / Indoor type
copper wound transformer designed and
manufactured as per IS 2026-1977 and 1st
filling of oil as per IS 335 of 1993,
connected delta on primary side and Star
on secondary side with additional neutral
brought out on load side, 1100V / (433V /
415V) with HV tapping + or - 2.5%
contineously rated for full load and
temporature rise not exceeding 50C in oil
and 55C rise by th resistance of the
winding after contineous run on full load
rating complete with the following standard
mountings.
Makes: Kirloskar / PETE / Esennar /

Voltamp.
1. Rated KVA : ........KVA
2. Service: Outdoor / Indoor
3. Mounting : Plinth.
4. Copper wound : Double.
5. Type : Core.
6. Cooling : ONAN
7. Temp . Rise : 55C.
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 415 / 433V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary
voltage variation : +7.5% to - 7.5% in steps
of 2.5%,
294
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
19. Terminal arrangement.
a. HV: Bare Busings / Cable end box
b. LV : Cable box
20. LV : One separate terminal for earthing.
20. No load losses (Watts): ..........As per IS
specification
21. Load losses (Watts): ............As per IS
specification
22. Impedance(Z%) : .............As per IS
specification
21. Fittings & Accessories.

a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Conservator with drain plug.
e. Oil level Indicator
f. Dehydrating silicagel breather
g. Air release device
h. Drain cum filter wall
i. Explosion vent with diaphragm
j. Radiators (Attachable)
k. Seperate neutral bushing
l. Uni directional flat rollers.
770 ELEC-7.14.2 Supply of 3 Phase, 50 Hz, Dry type, Indoor

type copper wound transformer designed
and manufactured as per IS 2026-1977 and
IS 11171-1985,connected delta on primary
side and Star on secondary side with
additional neutral brought out on load side,
1100V / (433V / 415V) with HV tapping + or
- 2.5% temporature rise by the resistance
90C. complete with the following standard
mountings.
Makes: Kirloskar / PETE / Esennar /

Voltamp.
295
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
1. Rated KVA : ........KVA (Cast Resin)
2. Service: Indoor
3. Mounting : Floor.
4. Copper wound : Double.
5. Type of cooling : ANAN.
6. Insulation Class : Class F
7. Temparature rise by resistance : 90C
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 433V / 415V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary
voltage variation : +5.0% to - 10.0% in
steps of 2.5% through links.
19. Terminal arrangement.

a. HV: Cable end box
b. LV : Cable end box
20. No load losses (Watts): ........... As per
IS specifications
21. Load losses (Watts): ..............As per IS
specifications
22. Impedance(Z%) : ............As per IS
specifications
21. Fittings & Accessories.

a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Winding temporature Indicator
e. Seperate neutral bushing
f. Uni directional flat rollers.
7.15 L.T. LINE MATERIALS AND

LIGHTENING PROTECTIVE SYSTEM
771 ELEC-7.15.1 Supply and erecting approved make 11KV, 1 No 1500.00
5KA metal oxide lightning arrestors
suitable for 11 KV supply with necessary
materials on existing cross arm.
772 ELEC-7.15.2 Supply and erecting porcelain disc type 1 No 600.00
insulator suitable for 11KV line with
suitable hardware on existing cross arms.
773 ELEC-7.15.3 Supply and erecting porcelain pin type 1 No 300.00
296
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
774 ELEC-7.15.4 Supply and erecting porcelain post type 1 No 675.00
775 ELEC-7.15.5 Supply and erecting porcelain pin/shackle 1 No 90.00
type insulator suitable for L. T.
776 ELEC-7.15.6 Approved made 11KV, 400A A.B switch 1 No 7000.00
with all standard accessories etc., complete
with cost and conveyance of all materials.

with all standard accessories etc., complete
with cost and conveyance of all materials.

(tilting) with all standard accessories etc.,
complete with cost and conveyance of all
materials.
779 ELEC-7.15.9 11KV, H.G fuse set including all standard 1 No 4000.00
accessories etc., complete with cost and
conveyance of all materials.
780 ELEC-7.15.10 Supply of 7/3.15 AAA C all Alluminium 1 Km 25013.00
annealed conductor Rabit.
781 ELEC-7.15.11 Supply of 7/2.50 AAA C all Alluminium 1 Km 15383.00
annealed conductor Weasel.
782 ELEC-7.15.12 Supply of 9.1 Mtr PSCC Pole 280 Kg 1 No 3129.00
Working load.
783 ELEC-7.15.13 Supply of 8.0 Mtr PSCC Pole 140 Kg 1 No 1665.00
Working load.
784 ELEC-7.15.14 Supply of 175 x 85 mm / 150 x 75 mm RS 1 Kg 50.00
Joist.
785 ELEC-7.15.15 Supply and installation of NIMBUS CPT- 1 No 128000.00
3/NLP 2200 / FOREND(ESE-EU) Advanced
lighting protection with capturing head of
135 - 210mm diameter, 205 -580mm height
and 4.60 - 4.940 kgs , and having Rod
length 760mm, weight 1.795 kgs with
stainless steel rod, working on the principle
of (ESE) Early Streamer Emission
technology, having a coverage radius of
79mts when mounted on 10 - 15 mts height
of existing lattice tower giving level 1
protection and anticipation emission time of
60 micro seconds/72 micro seconds. The
NIMBUS is manufactured according to
standard NFC 17 102 and UNE 21186-96
including functional integrity etc Complete.
Make : NIMBUS / FOREND / SCHIRTEC or
equivalent
297
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
786 ELEC-7.15.16 Installation and commissioning of NIMBUS / 1 No 31200.00
FOREND or equivalent advanced lighting
protection systems which includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of Earth Electrodes
6. Interconnection between the Electrodes
7. Termination of down conductor to earth
bus etc complete
787 ELEC-7.15.17 Supply of electro-Mechanical counter

Makes: CIRPROTEC / INDALAC / 1 Pt 16000.00
INGESCO / SCHIRTEC.
788 ELEC-7.15.18 Providing earth electrode of low carbon 1 Pt 11500.00
steel rod of 17mm dia, coated with 250
microns thick copper 3mtr long with clamps
and 2 bags of LORESCO ZEROLITE back
fill compound etc complete with
construction of brick masonary of size
300mm x 300mm chamber with cover for
maintenance free earthing.
789 ELEC-7.15.19 Supply of down conductor of 1x70sqmm

single core PVC insulated unarmoured
copper conductor cable of ISI mark.
Makes : Polycab / Havells / RPG / RR 1 Mtr 410.00
Kabel / KEI.
8.1 NET WORKING
790 ELEC-8.1.1 Supply of 2 Pair, 0.5mm telephone copper
wire.
Makes : Finolex / Delton / Surabi / Polycab 100 Mtrs 1010.00
791 ELEC-8.1.2 Supply of 5 Pair telephone copper wire.
Makes : Finolex / Delton / Surabi / Polycab 100 Mtrs 2800.00
792 ELEC-8.1.3 Supply of LAN Cable cat - 6 UTP cable.
Makes : D Link / AMP / Molex / Legrand / 100 Mtrs 2300.00
Krone.
793 ELEC-8.1.4 Supply of LAN Cable cat - 6 STP cable.
Makes : D Link / AMP / Molex / Legrand / 100 Mtrs 4400.00
Krone.
794 ELEC-8.1.5 Supply of Cat 6 RJ-45 information outlets
including duel face plate.
Makes : D Link / AMP / Molex / Legrand / 1 No 340.00
Krone.
795 ELEC-8.1.6 Supply of 48 Port manageble switches
Makes : CISCO / Net Gear / HP / D link. 1 No 15600.00
796 ELEC-8.1.7 Supply of 24 Port manageble switches
298
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
797 ELEC-8.1.8 Supply of 8 Port switches.
798 ELEC-8.1.9 Supply of access point.
Makes : CISCO-WAP321 or its equivalent 1 No 12500.00
in Net Gear / HP / D link.
799 ELEC-8.1.10 Supply of 7 feet length moulded patch cord.

Krone.
800 ELEC-8.1.11 Supply of 3 feet length moulded patch cord.

Krone.
801 ELEC-8.1.12 Supply of 24 port patch panels
Krone.
802 ELEC-8.1.13 Supply of 100 pair MDF loaded with 2/10
Modular
Makes : Krone make or its equivalent. 1 No 3680.00
803 ELEC-8.1.14 Supply of 100 Pair raiser cable for
telephone
Makes : Finolex / Delton / Surabi / Polycab. 1 Mtr 387.00
804 ELEC-8.1.15 Supply of 10 Pair telephone Copper wire.

805 ELEC-8.1.16 Supply of 20 Pair telephone Copper wire .

806 ELEC-8.1.17 Supply of 50 Pair telephone Copper wire .

807 ELEC-8.1.18 Supply of 10 pair Telephone distribution 1 No 650.00

box with back mount frame, krone
connector, powder coated metal body with
lock and key arrangement.
299
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
811 ELEC-8.1.22 Supply of 6U floor / Wall mounting net work
rack with power spike including all
accessories.
Makes : HCL / Vall. 1 No 4700.00
812 ELEC-8.1.23 Supply of 9U floor mounting net work rack
with power spike including all accessories.
817 ELEC-8.1.28 Supply of 6 Core (Indoor / Out door), Single
mode armourd, Optic fibre cable.
Makes : D Link / AMP / Molex / Legrand / 1 Mtr 75.00
Krone.
818 ELEC-8.1.29 Supply of 12 Core (Indoor / Out door),
Single mode armourd, Optic fibre cable.
Makes : D Link / AMP / Molex / Legrand / 1 Mtr 105.00
Krone.
819 ELEC-8.1.30 Supply of 6 port fibre distribution unit. (FDU
/ LIU) loaded with couplers etc complete.
Krone.
820 ELEC-8.1.31 Supply of 12 port fibre distribution unit.
(FDU / LIU) loaded with couplers etc
complete.
Krone.
821 ELEC-8.1.32 Supply of Subscriber connector (SC) to SC
/ LC patch card of 1 Mtr length.
Krone.
822 ELEC-8.1.33 Supply of Pigtails for fibre core connectivity.
300
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Krone.
823 ELEC-8.1.34 Supply of Cat 6 RJ-45 information outlets
including Single face plate.
Krone.
RACEWAYS AND JUNCTION BOXES
824 ELEC-8.1.35 Supply of 100mm x 38mm G I Raceways of 1 Mtr 460.00
2mm thick with top cover and required hard
ware etc complete.
ware etc complete.
ware etc complete.
ware etc complete.
ware etc complete.
ware etc complete.
830 ELEC-8.1.41 Supply of 172mm x 52mm G.I. Junction box 1 No 340.00
of 2mm thick for direct acces to cables at
the inter section of Raceways.
9.1 MISSILLANEOUS ITEMS
833 ELEC-9.1.1 TW Seperators / Gutties 100 Nos 165.00
834 ELEC-9.1.2 Rawl Plugs 100 Nos 28.00
835 ELEC-9.1.3 U Nails 100 Nos 44.00
836 ELEC-9.1.4 Alluminium Link Clips 144 Nos 55.00
837 ELEC-9.1.5 50 mm G.I.Nut and Bolts. 1 Set 13.00
838 ELEC-9.1.6 63 to 100 mm G.I.Nut and Bolts. 1 Set 24.00
839 ELEC-9.1.7 50 mm 0 Gauge Nails 1 Doz 44.00
840 ELEC-9.1.8 63 to 100 mm 0 Gauge Nails 1 Doz 73.00
841 ELEC-9.1.9 Hard Coke 1 Kg 15.00
842 ELEC-9.1.10 Salt 1 Kg 10.00
843 ELEC-9.1.11 PVC Cleats 2 Way 100 Nos 330.00
844 ELEC-9.1.12 PVC Cleats 4 Way 100 Nos 440.00
301
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
845 ELEC-9.1.13 Binding Wire 1 Kg 61.00
846 ELEC-9.1.14 PVC / Cotton Insulation tape Role ( 10 1 No 17.00
Mtrs)
847 ELEC-9.1.15 C.I.Knob 1 No 25.00
848 ELEC-9.1.16 Stay tight set (Jum bracket 300 mm) 1 Pair 300.00
849 ELEC-9.1.17 Stay clamp with bolts and Nuts) 1 Set 200.00
850 ELEC-9.1.18 L.T.Guy insulator 1 No 75.00
851 ELEC-9.1.19 12 / 15 MS plain rod fan hook 1 No 30.00
852 ELEC-9.1.20 19 / 20 mm Steel tube fan down rod 1 Mtr 80.00
853 ELEC-9.1.21 Consealed box PVC / MS with hook for fan 1 No 100.00
854 ELEC-9.1.22 Coil Earthing 1 No 75.00
855 ELEC-9.1.23 Cable root Indicators 1 No 90.00
856 ELEC-9.1.24 40 mm x 40 mm x 6 mm angle iron with I 1 Set 250.00
bolt.
857 ELEC-9.1.25 Mild Steel Items 1 Kg 61.00
858 ELEC-9.1.26 Acrylic Cover of size 4" x 7" for night lamps. 1 No 17.00
859 ELEC-9.1.27 TW / PVC Round Blocks 1 No 7.00

860 ELEC-9.1.28 G.I.Funnel with Mesh 1/2" x 4" 1 No 83.00
861 ELEC-9.1.29 Asbestos Sheet 1 Sqft 22.00
862 ELEC-9.1.30 First Aid box 18" x 12" x 8" 1 No 1100.00
863 ELEC-9.1.31 11 KV/22 KV Hand gloves 1 No 200.00
864 ELEC-9.1.32 Danger Notice Plates of size 250x200mm, 1 No 250.00
shall comply with IS:2551-1982.
865 ELEC-9.1.33 Shock instrution chart in English / Hindi / 1 No 500.00
Telugu duly framed with front glass.
866 ELEC-9.1.34 Copper plate / Copper strip (Per K.G) 1 Kg 605.00
867 ELEC-9.1.35 No. 8/10 SWG copper wire (per K.G) 1 Kg 605.00
868 ELEC-9.1.36 PVC Insulated copper winding wire of fine 1 Kg 726.00
quality (per K. G)
869 ELEC-9.1.37 No. 14 SWG copper wire (per K. G) 1 Kg 605.00
870 ELEC-9.1.38 Copper winding wire (per K. G) 1 Kg 701.00
871 ELEC-9.1.39 G.I. Strip / Plate / Wire (per K. G) 1 Kg 68.00
872 ELEC-9.1.40 Alluminum Bus bars/Strips/accessories 1 Kg 234.00
873 ELEC-9.1.41 Alluminum winding wire 1 Kg 322.00
874 ELEC-9.1.42 6.2 Volt series bulb (25 Nos.) 25 Nos 91.00
875 ELEC-9.1.43 6.2 Volt series bulb with navar plate(25 25 Nos 97.00
Nos.)
876 ELEC-9.1.44 Supply of Rotating machine 1 No 16500.00
877 ELEC-9.1.45 Supply and fixing of 6mm thick MS 1 Kg 67.00
Chekered plate.
878 ELEC-9.1.46 Supply and fixing of 6mm thick Alluminium 1 Kg 266.00
Chekered plate.
879 ELEC-9.1.47 Copper old winding Wire scrap for 1 Kg 1 Kg 165.00
880 ELEC-9.1.48 Cement 1 Kg 6.60
881 ELEC-9.1.49 Hylam Sheet 1 sq.in 0.60
302
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
882 ELEC-9.1.50 Earth work excacvation including all soils 1 Cum 220.00
for trench, Pole Pit and Earth Pit.
883 ELEC-9.1.51 Cost of Sand 1 Cum 594.00
884 ELEC-9.1.52 Cost of Bricks 1000 Nos 3819.00
885 ELEC-9.1.53 25mm Nominal Bore light grade G.I.Pipe 1 Mtr 226.00
886 ELEC-9.1.54 25mm Nominal Bore Medium grade 1 Mtr 242.00
G.I.Pipe
887 ELEC-9.1.55 40mm Nominal Bore light grade G.I.Pipe 1 Mtr 355.00
888 ELEC-9.1.56 40mm Nominal Bore Medium grade 1 Mtr 381.00
G.I.Pipe
889 ELEC-9.1.57 Drilling of 16 Nos through holes of 12mm 1 No 6.00
dia to G.I pipe
890 ELEC-9.1.58 G.I Nuts, Bolts an Washers each set 1 Set 11.00
891 ELEC-9.1.59 18" dia 2" thick hume pipe ring 1 No 220.00
892 ELEC-9.1.60 18" dia 3" hume pipe ring 1 No 275.00
893 ELEC-9.1.61 2" thick CC cover for hume pipe ring with 1 No 121.00
handle.
894 ELEC-9.1.62 Supply of Saddle / Clamps suitable for 100 Nos 249.00
fixing 2 Core 4 to 10 Sqmm Cable.
fixing 4 Core 4 & 6 Sqmm Cable.
fixing 4 Core 10 & 16 Sqmm Cable.
fixing 3.5 Core 25 & 35 Sqmm Cable.
fixing 3.5 Core 50 Sqmm Cable.
fixing 3.5 Core 120 to 185 Sqmm Cable.
fixing 3.5 Core 400 Sqmm Cable.
903 ELEC-9.1.71 Supply and fixing of Anchor fastner with fan 1 No 88.00
hook / Providing MS Fan hook with grouting
and cement plastering.
904 ELEC-9.1.72 Supply and fixing of PVC synthetic 1 sqm 4200
elastomer electrically insulated mat with
class A insulation conforming to IS: 15652-
2006 having 2mm thickness upto 3.3KV
905 ELEC-9.1.73 1 sqm 4200
Supply and fixing of PVC synthetic
Class B insulation conforming to IS: 15652-
2006 having 2.5mm thickness upto 11KV
303
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
906 ELEC-9.1.74 Supply and fixing of PVC synthetic 1 sqm 4200
ClassC insulation conforming to IS: 15652-
2006 having 3mm thickness upto 33KV
907 ELEC-9.1.75 Supply of round bottom G.I sheet bucket of 1 No 355.00
9 Ltrs. Capacity as per IS:2546 made out of
24 gauge GI sheet with extra handle at
bottom duly painted inside and red out side
with printed with FIRE Mark for stand and
hook and filled with sand and arranged to
existing stand or hook. ( MR )
908 ELEC-9.1.76 Providing floor mounting stand for keeping 1 No 1800.00

4No of fire bucket 1500mm length, 900mm
height made out of 40x40x6mm angle iron
welded with 4 hooks and duly painted with
one coat of red lead and two coats of
enamel paint.
10.1 WIRELESS FIRE ALARAM SYSTEM
909 ELEC-10.1.1 Supply and fixing of wireless smoke
detection control panel of 28 wireless
zones, 2 Hard wired Zones, Tamper Alert,
Pass code protected, RF jamming
recognition, diagnostic feature for RF signal
strength between panel and each detector,
vent reporting using PSTN telephone line,
dialing upto 4 telephone numbers, event
reporting as per users choice, LCD screen
display, two way voice interaction, battery
backup stand by time up to 12 hrs Including
transportation, all taxes and all labour
charges etc complete.
Makes : Cease Fire / Visonic / Honeywell 1 No 40000.00

910 ELEC-10.1.2 Supply and fixing of Wireless Repeater.The
wireless repeater extends the
communication range of detection by
relaying data between receiver and remote
wireless transmitter Including
304
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
911 ELEC-10.1.3 Supply and fixing of Wireless Siren Strobe
external wireless siren - a fully supervised
power code outdoor (IP55) wireless Siren
and strobe light. Designed for external
installation. Wire - Free connection between
control panel and siren. Convenient rapid
no- mess installation. Separate fire alarm
signals, 98db Piezo siren and high power
strobe light. Weather resistant, IP55, 2-way
communication for local and remote
diagnostics. Plug-in power supply, NIMH
rechargeable back-up power battery,
transmits status, tamper, low- battery,
supervisory and AC loss messages to the
control panel, Tri- State tamper switch
identifies screw manipulation removal of
cover or playing from the wall Including
912 ELEC-10.1.4 Supply and fixing of wireless Fully
Supervised Smoke Detector, Photoelectric
detection technology for superior detection
sensitivity , sound and transmitted for
smoke, tamper and low battery, works on
power code protocol, easy programming
and enrolling to the control panel, long life 9
volt alkaline or lithium battery Including

10.2 ADDRESSABLE - FIRE ALARM SYSTEM
913 ELEC-10.2.1 Supply, Installation, testing and
commissioning of wall mounting 10 loop
micro processor based analog addressable
fire control panel expandable by minimum 2
additional loops with minimum 80 character
LCD display 4 access levels 1000 events,
historical logging, flash E-PROM, 240 volts
A C Power supply, automatic battery
charger, 24V SLA batteries suitable for
operating the entire system including tack
back units and the hooters/strobes for a
minimum of 4 hours in battery condition the
panel shall have suitable power amplifiers
for hooter / strobes the panel shall be
capable beeing integrated with the BMS
system and shall include cost of supply,
installation of any additional modules or
interfaces required for the same. The panel
shall be completed as per the specification
and as required fixing of 10 loop Micro
305
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
processor based Fire Alarm control panel
with zonal indictions and battery back up as
per detailed specifications.
Makes: Notifier / Edwards 1 No 620000.00
Makes: Siemens / Morley / Bosch / Ravel 1 No 580000.00
306
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
307
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
commissioning of intellegent analogue
addressable Repeater panel including the
cost of mounting accessories complete as
per specification as required.
920 ELEC-10.2.8 Supply and fixing of addressable wall
mounting strobes cum hooters including the
cost of mounting accessories complete as
per specifications and as required including
testing and commissioning.
921 ELEC-10.2.9 Supply and installation of addressable
analogue manual call point with resetable
flexible element to initiate alaram including
the cost of mounting accessories etc.
complete.
308
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
922 ELEC-10.2.10 Supply and instllation of intallegent
analogue addressable photo electric smoke
detector including cost of base plate etc.,
complete as per specification with required
fittings and accessories.
923 ELEC-10.2.11 Supply and installation of intallegent
analogue addressable rate of rise cum fixed
temparature heat detectors including the
cost of base plate. 75mm dia MS outlet box
for fixing of the detector base, mounting
accessories etc., complete as per
specifications and as required.

924 ELEC-10.2.12 Supply and installation of intalligent
analogue addressable multi criterion
detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia
MS outlet box for fixing of the detector
base, mounting accessories etc., complete
as per specifications and as required.

925 ELEC-10.2.13 Supply and Installation of Intalligent
analogue addressable Control Modules
including the cost of mounting accessories
complete as per specifications and as
required.
analogue addressable monitor modules
required.
analogue addressable fault isolator
modules including the cost of mounting
accessories complete as per specifications
and complete as required.
10.3 CONVENTIONAL - FIRE ALARM SYSTEM
309
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
commissioning of conventional Micro
processor based Fire Alarm panel with 2
zone, 12V SMF batteries etc., complete
with all standard accessories.
Makes: System Censor / Ravel / Pinnacle 1 No 7500.00
935 ELEC-10.3.8 Supply and installation of Repeater panel
required.
310
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
936 ELEC-10.3.9 Supply and installation of duel tone 1 No 675.00
electronic hooter of 85dB including the cost
of mounting accessories complete as per
937 ELEC-10.3.10 Supply and installation of dust and vermin 1 No 650.00
proof manual call point to initiate audio
visual alarm including the cost of mounting
accessories complete as per specifications
and as required.
938 ELEC-10.3.11 Supply and installation of response 1 No 150.00
indicators for above false ceiling detectors.
939 ELEC-10.3.12 Supply and installation of plug - in type
multi criterion detectors including the cost of
base plate. 75mm dia M.S. outlet box for
fixing of the detector base. Mounting
accessories etc., complete as per
specifications as required.
940 ELEC-10.3.13 Supply and installation of plug -in type
photo electric smoke detectors including the
cost of base plate. 75mm dia MS outlet box
for fixing of the detector base. Mounting
accessories etc complete and as per
941 ELEC-10.3.14 Supply and installation of plug -in type rate
of rise cum fixed temperature heat
detectors including the cost of base plate.
75mm dia MS outlet box for fixing of the
detector base, mounting accessories etc.,
required.

10.4 POWDER BASED FIRE EXTINGUISHERS
942 ELEC-10.4.1 Supply and fixing of ABC stored pressure
squeeze grip type fire extinguishers, 9 kg
capacity, IS:15683 : 2006, filled with ABC
Mono Ammonium Phosphate base powder-
90 complete with discharge hose and wall
mounting bracket, 2mm Mild Steel, EPDM
Rubbers, Pressure Guage, which work
effectively on all class of fires (A, B, C &
Electrical fires) with 5 years warranty
Including transportation, all taxes and all
labour charges etc complete.
Makes : Cease Fire / Minimax 1 No 9180.00

Makes : Safex / Kenex / Bharat / Reliance 1 No 5900.00
311
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
943 ELEC-10.4.2 Supply and fixing of ABC Powder MAP 4
Kg Fire extinguisher Mono ammonium
phosphate power 90, stored pressure type,
IS 15683 : 2006, pressure gauge gross wt.
6.9 kg, empty wt.2.9 kg, can Ht.440mm,
Diameter 140mm, Discharge time less than
13 sec, controllable discharge mechanism,
range min. 4 mts applicable on classes A,B,
C & electrically started fires, A- rating 3A,
B-rating 34B, can construction: Deep
drawn Co2 mig welding, wall construction:
Forging & Machining, internal coating of
can: Epoxy power coating, External coating
of Can:Epoxy polyster powder coating,
sheet metal thickness:1.60mm, Helium
leakage detection tested, ISI & CE
approved with 5 years warranty (Cease Fire
/ Minimax make) Including transportation,
all taxes and all labour charges etc
complete.

944 ELEC-10.4.3 Supply and fixing of ABC Powder MAP 2
Kg Fire extinguisher Mono ammonium
phosphate power 90, stored pressure type,
IS 15683 : 2006, pressure gauge gross wt.
3.6 kg, empty wt.1.6 kg, can Ht.344mm,
Diameter 108mm, Discharge time less than
8 sec, controllable discharge mechanism,
range min. 2 mts applicable on classes A,B,
C electrically started fires, A- rating 2A, B-
rating 21B, can construction: Deep drawn
Co2 mig welding, wall construction: Forging
& Machining, internal coating of can: Epoxy
power coating, External coating of
Can:Epoxy polyster powder coating, sheet
metal thickness:1.60mm, Helium leakage
detection tested, insta - alert, ISI & CE
complete.
312
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
945 ELEC-10.4.4 Supply and fixing of Ceiling Mounted ABC
MAP 90, 5 Kg stored pressure type,
pressure gauge, Gross Wt.7.7 kg, Empty
Wt.2.7 kg, Can Ht264mm , Dia 240mm,
Discharge time : less than 8 sec, IS 15683 :
2006 Auto discharge mechanism on
temperature rise, Applicable on A,B,C, &
Electrically - started fires, Can Construction:
Forging & Machining, Internal coating of
Can: Epoxy Power coating, External
Coating of Can: Epoxy Polyster powder
coating, sheet metal thickness:1.60mm ,
Helium leakage detection tested, ISI
complete.
10.5 CLEAN AGENT FIRE EXTINGUISHERS
946 ELEC-10.5.1 Supply and fixing of 2 Kg Fire exitinguisher
Clean Agent HCFC 123, Stored pressure
type, IS 15683 : 2006 pressure guage,
gross weight 3.7Kg empty weight 1.7 Kg,
can weight 344mm, Diameter 108mm,
discharge time minimum 8 secs,
controllable discharge mechanism, range
minimum 2 meters, applicable on class
A,B,C and electrically started Fire, A rating
1A, B rating 21B, can construction: Deep
drawn & CO2 mig welded, Valve
construction: Forging & Machining, Internal
coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster
powder coating, sheet metal thickness: 1.60
mm, Helium leak detection tested, ISI & CE
approved, 5 Years warranty.

Makes : Safex / Kenex / Bharat. 1 No 11000.00
313
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
947 ELEC-10.5.2 Supply and fixing of 4 Kg Fire exitinguisher
Clean Agent HCFC 123, Stored pressure
type, IS 15683 : 2006, pressure guage,
gross weight 6.9Kg empty weight 2.9 Kg,
can hight 440mm, Diameter 140mm,
discharge time minimum 8 secs,
controllable discharge mechanism, range
minimum 2 meters, applicable on class
A,B,C and electrically started Fire, A rating
1A, B rating 21B, can construction: Deep
drawn & CO2 mig welded, Valve
construction: Forging & Machining, Internal
coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster
powder coating, sheet metal thickness: 1.60
mm, Helium leak detection tested, ISI & CE
approved 5 Years warranty.

Makes : Safex / Kenex / Bharat. 1 No 21000.00
948 ELEC-10.5.3 Supply & Fixing of 4.5Kg, CO2 Type Fire
Extinguisher, Trolley Mounted, Easy Weight
Management, Used Unused Mechanism,
Squeeze Grip, Gross Weight 19.1 Kg,
Empty Weight 14.6 Kg, Can Height 860MM,
Diameter 140MM, Discharge time minimum
13 Secs, Controllable discharge
mechanism, Range minimum 2 Meters,
Applicable on Class B,C & electrically
started Fire, B Rating 13B, Can
Construction : Hot Spinning / Forging, Valve
Construction : Forging & Machining,
Internal Coating of Can : Not Applicable,
External Coating of Can : Spray Painting,
Sheet metal thickness : 4.5MM, ISI & CE
Approved, 2 Year Warranty Including

949 ELEC-10.5.4 Supply and fixing of Escape signage boards 1 No 1300.00
in Rigid Photo luminecent based glow in
Dark rigid sheet with high intensity luminous
properties with specificaiton of Cease Fire
or its equivalent make Model-1ES01
314
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
950 ELEC-10.5.5 Supply and fixing of Cease fire or its 1 No 15010.00
equivalent Escape gear Mild Steel box size
425mmx360mmx140mm Epoxy powder
coated to protect it from Weathering ,
smoke hood tested to Eupropean Standard
EN 403 1993-S known to reduce Carbon
Monoxide, propend(acrloein), hydrogen
chloride, hydrogen Cyanide and Solid and
liquid toxic particles to manageable level for
atleast 15 minutes shall with stand
tempeartures upto 80 degrees single use
only Fire Blanket size 1.2m x1.8m used to
cover any vessel containing used to
Extinguish a clothing fire wrap blanket
around the victim.
951 ELEC-10.5.6 Supply and fixing of 4Nos of 9 Ltrs capacity 1 Set 1200.00
round bottom bucket with sand, duly
painted with enamel white inside & red out
side and letter FIRE with black colour.
952 ELEC-10.5.7 Supply anmd fixing of Fire bucket stand 1 Set 1000.00
fabricated by M.S. angles to install for two
numbers of buckets as per local fire officers
standards.
10.6 WATER MIST FIRE EXTINGUISHERS
953 ELEC-10.6.1 Supply & Fixing of Water Mist 9 Ltr. Fire
Extinguisher : Gross Weight 23.9 kg.,
Weight of the empty firefighting system
without compressed air bottle and bottle
valve- 14.9 kg., Can Height 560
MM,Diameter 204MM, Weight of the gun-
1.9kg, Nominal charge- 9 Ltr., Recoil
approx. 10N, Extinguishing Media Flow
0.23 L/ sec, Water Discharge Hose 13
MM, Discharge time minimum 25 Secs,
Range minimum 10 Meters, Compressed
Air to Gun 10 MM, Applicable on Class A,
B, C & Electrically started Fires, ARating-
27A, BRating-233B, Compressed air bottle
(volume/pressure) - 2L / 300bar, Operating
pressure(dynamic)-approx 5.0 bar, Lancing
distance of the extinguishing agent-in spray
Approx. 7.0 m, in jet mode Approx, 12.0 m.
Operation time- approx 40 sec,
Extinguishing enhancement agent- Foam
Additive, CE and ERDA approved, Sheet
Metal Thickness 1.5MM, 1 Year
Warranty.
Makes: Cease Fire or Equivalent 1 No 183200.00
315
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
AEROSOL GENERATION SYSTEM (AGS)
AND FIRE EXTINGUISHERS
954 ELEC-10.6.2 Supply, installation, testing and 1 No 46550.00
commissioning of Addressable Control
panel for AGS system with monitoring
system and provision of interactive TFT
color Graphic Display with touch Screen
Control and shall have built in feature of
Mimic software which works on a Android
based technology and a facility to show the
layout location of the installation area and
prescribed location of the devices during
the fire accident. shall have minimum two
level password protection. Shall have alert
indication for missing device, contaminated
device. The control panel shall have real-
time clock (RTC) indicate time, date, month
& year and along with a provision of
Ethernet based circuit as if required.
Makes : SALAMANDRA / SEAARA / AGS

commissioning of Addressable Multi sensor
with integrated smoke sensing chamber
and heat sensing element. Addressable
smoke detector shall operate on light
scatter principle. The build-up of dirt or
similar contamination on the sensing
chamber shall be continually monitored by
control panel, when it exceeds
predetermined level; the panel has to
indicate that the detector is in need of
servicing. The detector shall have an
integral microprocessor capable of making
alarm decision based on alarm level set.
The Obs/ft should be 0.5 obs/ft. The
detector shall blink when the detector is
addressed and glow steady on alarm. The
detector shall have provision to alter the
sensitivity from the panel. The detector
shall have electronic free base. The
detector and base construction shall be
made of polycarbonate plastic. The detector
shall be capable of reading from the control
panel, i.e. health of the detector, alarm level
setting. Latching the detector, isolating the
detector from the control panel shall be
possible. The detector shall preferably have
twin LEDs for 360 viewing angle.
316
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
commissioning of addressable Loop
Powered Sounder with integral beacon
within horn using high intensity LED
technology. The sounder beacon shall work
with loop power. No separate power supply
with cable shall be used. The sounder
beacon shall be addressable type. It shall
have electronic addressing. No DIP/DIL
switches are permitted for address setting
in order to avoid unauthorized setting. The
construction of the sounder beacon shall be
made of polycarbonate plastic. The sounder
beacon sound pressure level shall be 85 dB
at 10ft.

commissioning of addressable Control
Module with built-in LED. The LED shall
blink when it is addressed and it shall glow
steady when it is actuated and it should
have principle of working with NC/NO relay
circuit. It should have a cross zoning facility
with a inbuilt sounder. The control module
shall have electronic addressing. The
control contact rating shall be a minimum of
2 amps @ 24V DC (Resistive). The control
module shall operate from SLC loop power.
No external power/cable shall be used.

958 ELEC-10.6.6 Supply and installation of manually 1 No 70775.00
operated suppression system using Aerosol
Generator System for all classes of fire with
active substance of 3.3. Kg and does
cooling effect with no re-ignition. The
product with minimum life of 15 years and
no maintenance. The discharge time should
be 25 sec and has net weight of 4.6 kg and
has a capacity to cover 60 m and shall be
confirmed to NFPA 2010 and has other
national and international certificates.
317
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
959 ELEC-10.6.7 Supply of Auto Detection and Suppression 1 No 114000.00
System using Aerosol Generator System
with required fittings as per standard
composition for all classes of fire, With a
provision to connect to detect smoke and
heat with a obt/ft of 0.5 and flexibility of
adjusting it for a temperature of
57/68/93/141 degree centigrade as per the
site environment. The product Min Life
shall be 15 years and no Maintenance. The
Discharge time should be 78 sec. The
Generator with a net weight of 10 kg Active
Substance of 3.25 kg. and has diameter
220mm and height 220mm The Generator
is suitable for Server Room, Electrical
Storage and technical appliances, important
documents area & etc.

960 ELEC-10.6.8 Supply of Auto Detection and 1 No 38000.00
Suppression System using Dry Sprinkler
Generator as per standard composition for
all classes of fire, with a provision to
connect to detect smoke and heat with a
obt/ft of 0.5 and flexibility of adjusting it for a
temperature of 57/68/93/141 degree
centigrade as per the site environment. The
product Min Life shall be 15 years and no
Maintenance. The Discharge time should
be 21 sec. The Generator has a net weight
of 1.2 kg. Active Substance of 0.3 kg and
has diameter 20mm and height 135mm.
The Generator is suitable for Server Room,
Electrical Storage and technical appliances,
important documents area & etc.

961 ELEC-10.6.9 Supply of Auto Detection and Suppression 66975.00
System using Aerosol Generator System
as per standard composition with required
fittings for all classes of fire, with a provision
to connect to detect smoke and heat with a
obt/ft of 0.5 and flexibility of adjusting it for a
temperature of 57/68/93/141 degree
centigrade as per the site environment. The
product Min Life shall be 15 years and no
Maintenance. The Discharge time should
be 50 sec. The Generator has a net weight
of 4.5 kg. Active Substance of 1.4 kg and
has diameter 40mm and height 187mm.
The Generator is suitable for Server Room,
318
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Electrical Storage and technical appliances,
important documents area & etc.
962 ELEC-10.6.10 Supply of Aerosol Heat Starter Sprinkler 1 No 8075.00
used for Auto Detection and Suppression
System for Aerosol Generator System for
all Class of Fire. The heat Starter Sprinkler
has various starter capacity, which ranges
from +50c to +163c. The starter can cover
up to 18 m2. The product Min Life shall
be15 years. The output power from the
Starter is 3v and current 0.6A and operates
at a temperature range of - 50c to +80c.
The Starter Sprinkler is suitable for Server
Room, Electrical Storage and technical
appliances, Important documents area etc.

10.7 FIRE HYDRANT AND SPRINKLER SYSTEM
963 ELEC-10.7.1 Supplying, installation, testing and 1 Set 354000.00
commissioning of electric driven main fire
pump suitable for automatic operation and
consisting of following complete in all
respect as required
a) Horizontal type, multistage, centrifugal,

split casing pump of cast iron body &
bronze impeller with stainless steel shaft,
mechanical seal to ensure a minimum
pressure of 3.5 Kg / sq.cm. at highest and
farthest outlet at specified flow of 1620 lpm
at 56 Mtr. head conforming to IS 1520
b) Suitable HP SQ cage induction motor,

TEFC, synchronous speed 1500 RPM,
suitable for operation on 415Volts, 3 phase
50 Hz. AC with IP 55 protection for
enclosure, horizontal foot mounted type
with Class-'F' insulation, conforming to IS-
325
c) M.S. Fabricated common base plate,

coupling, coupling guard, foundation bolts
etc as required.
d) Suitable cement concrete foundation
duly plastered with anti vibration pads.
Makes of Pumps: Kirloskar / Mather&Platt.

Makes of Motors: Siemens/ ABB/ Kirloskar
319
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
964 ELEC-10.7.2 Supplying , installation , testing and 1 Set 390000.00
consisting of following : complete in all
respect as required


325

etc as required.

respect as required.


325
320
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
etc as required.

966 ELEC-10.7.4 Supplying , installation, Testing and 1 Set 468000.00
commissioning of diesel engine driven main
fire pump suitable for automatic operation
and consisting of following : complete in all
respect as required
a) Horizontal type, multistage, centrifugal

pump of cast iron body & bronze impeller
with stainless steel shaft, mechanical seal
to ensure a minimum pressure of 3.5 Kg /
sq.cm. at highest and farthest outlet at
specified flow of 1620 lpm at 56 Mtr head
b) Suitable HP, 1500 RPM water cooled

with radiator, diesel engine conforming to
relevant BS & IS standard complete with
auto starting mechanism, 12 Volts / 24
Volts electric starting equipment, Diesel
Tank, exhaust pipe extended upto 1 m.
outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick
alluminium sheet cladding, residential
silencer, instruments and protection as per
specification, stop solenoid for auto stop in
the event of fault with audio indications,
painted with post office red colour etc as
required.

etc as required.
Makes of Engines : Kirloskar / Cummins.

Makes of Pumps : Kirloskar / Mather&Platt
321
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
respect as required


required.

etc as required.


respect as required
322
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5

required.

etc as required.


respect as required
a) End suction back pull out centrifugal

pump, Std fitted with BRONZE IMPELLER
& gland packing ,capacity 171 Cum/hr
(2850 LPM) at total head 70 M at operating
speed 2900 rpm. Pump duty as per TAC
b) 55 KW / 75 HP, 3000 srpm, TEFC (IP55)
horizontal foot mounted, squirrel cage
induction motor, suitable for 415 volts +/-
10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class
F insulated and suitable for ambient
temperature up to 50 deg C. Motor in frame
SC 250 M frame for driving above pump.
323
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
etc as required.

respect as required
a) End suction back pull out pump, Std

fitted with BRONZE Impeller & gland
packing, capable of delivering 171
Cum/hr(2850 LPM) at a total head of 70 M
when operated at 1800 rpm and pump duty
as per TAC
b) Liquid cooled, 85 BHP at 1800 rpm,
diesel engine (Radiator cooled) 12 Volts
starting system with standard accessories
etc as required.


respect as required

& gland packing ,capacity 137 Cum/hr
(2280 LPM) at total head 70 mwc at
operating speed 2900 rpm. Pump duty as
per TAC
324
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
b) 45 KW / 60 HP, 3000 srpm, TEFC (IP55)
Horizontal foot mounted, squirrel cage
induction motor, suitable for 415 volts +/-
10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class
F insulated and suitable for ambient
SC 225 M frame

etc as required.

972 ELEC-10.7.10 Supplying, installation, Testing and 1 Set 443750.00
respect as required

as per TAC
Diesel engine (Radiator cooled) 12 Volts
etc as required.

973 ELEC-10.7.11 Supplying, installation, Testing and 1 Set 161250.00

respect as required
325
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
& gland packing ,capacity 97 Cum/hr (1620
LPM) at total head 56 mwc at operating
speed 2900 rpm. Pump duty as per TAC
b) 30 KW / 40 HP, 3000 srpm, TEFC

(IP55) horizontal foot mounted, squirrel
cage induction motor, suitable for 415 volts
+/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply.
Class F insulated and suitable for ambient
SC 250 M frame for driving above pump.

etc as required.

respect as required

as per TAC
Diesel engine (Radiator cooled) 12 Volts
etc as required.


commissioning of electric driven
pressurisation / Jockey pump suitable for
326
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
automatic operation and consisting of
following : complete in all respect as
required
and flow of 180 lpm at 56 Mtr head
b) Suitable HP SQ cage induction motor
TEFC type suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55
class of protection for enclosure, horizontal
foot mounted type with Class-'F' insulation,
conforming to IS-325
etc as required.
Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar

commissioning of electric driven
pressurisation / Jockey pump suitable for
required

etc as required.
327
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes of Motors : Siemens/ ABB/ Kirloskar

commissioning of electric driven Terrace /
Booster pump suitable for automatic
operation and consisting of following :
complete in all respect as required.

etc as required.
Makes of Motors : Siemens / ABB /

Kirloskar
Mono Bloc Booster pump suitable for
required.
a) Horizontal type, centrifugal End Suction

b) Three Phase High Speed Centrifugal
Pump. Pump with CI Impeller and Gland
Packing with 9.3 KW / 12.5HP, 2 pole,
TEFC, 415 V, 3ph motor
328
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
etc as required.
Makes : Kirloskar
required.

Packing with 7.5 KW / 10 HP, 2 pole,
TEFC, 415 V, 3ph motor
etc as required.
Makes : Kirloskar
required.
Packing with 5 KW / 7.5 HP, 2 pole, TEFC,
415 V, 3ph motor
etc as required.
329
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes : Kirloskar
981 ELEC-10.7.19 Providing , laying, testing & Commissioning
of following classes MS pipes conforming to
IS 3589 and 1239 including fittings like
elbows, tees, flanges, tapers, nuts, bolts,
gaskets etc., complete.
Makes : Jindal / Hissar / Tata pipes

(a) 250 mm dia 1 Mtr 3245.00
(b) 200 mm dia 'C' Class 1 Mtr 3210.00
(c) 200 mm dia 'B' Class 1 Mtr 2800.00
(d) 150 mm dia 'C' Class 1 Mtr 2400.00
(e) 150 mm dia 'B' Class 1 Mtr 1930.00
(f) 100 mm dia 'C' Class 1 Mtr 1515.00
(g) 100 mm dia 'B' Class 1 Mtr 1275.00
(h) 80 mm dia 'C' Class 1 Mtr 1000.00
(i) 80 mm dia 'B' Class 1 Mtr 895.00
(j) 65 mm dia 'C' Class 1 Mtr 750.00
(k) 65 mm dia 'B' Class 1 Mtr 675.00
(l) 50 mm dia 'C' Class 1 Mtr 600.00
(m) 50 mm dia 'B' Class 1 Mtr 530.00
(n) 40 mm dia 1 Mtr 512.00
(o) 32 mm dia 'C' Class 1 Mtr 400.00
(p) 32 mm dia 'B' Class 1 Mtr 330.00
(q) 25 mm dia 'C' Class 1 Mtr 300.00
(r) 25 mm dia 'B' Class 1 Mtr 270.00
982 ELEC-10.7.20 Supplying and fixing single headed Internal 1 No 8125.00
/ External hydrant valve with instantaneous
Gun metal couplings of 63mm dia with Cast
iron wheel ISI marked conforming to IS
5290 (Type -A) with blank Gun Metal cap
and chain as required.
Make: Mini Max / Safex / Newage / Winco /

Padmini.
983 ELEC-10.7.21 Supplying, fixing, testing and
commissioning of butterfly valve PN 1.6,
with Bronze / Gun metal seat duly ISI
marked complete with Nuts, Bolts,
Washers, gaskets, conforming to IS 13095
of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-

Shankar / Leader/ Zolotto / Intervalve.
330
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
(a) 250 mm . dia 1 No 12525.00
(b) 200 mm . dia 1 No 5300.00
(c) 150 mm dia 1 No 4350.00
(d) 100 mm dia 1 No 3400.00
(e) 80 mm dia 1 No 3100.00
984 ELEC-10.7.21 Providing, installation, testing and
commissioning of dual plate non - return
valve of following sizes confirming to IS:
5312 complete with rubber gasket, GI bolts,
nuts, washers etc as required

(a) 200 mm dia 1 No 5000.00
(b) 150 mm dia 1 No 4000.00
(c) 100 mm dia 1 No 3725.00
(d) 80 mm dia 1 No 3500.00
(e) 50 mm dia 1 No 1723.00
985 ELEC-10.7.22 Manufacture, Supply and delivery of CI
Wafer Lug type Butterfly Valves conforming
to IS 13095/1991 (Reaffirmed 1998)
excluding transportation, CED and taxes
etc., complete. Operation done with worm
actuator ISI marked Rate at Ex-Factory

(a) 250 mm . dia 1 No 17007.00
(b) 200 mm . dia 1 No 11849.00
(c) 150 mm dia 1 No 7631.00
(d) 100 mm dia 1 No 5088.00
(e) 80 mm dia 1 No 3812.00
(f) 50 mm dia 1 No 3067.00
986 ELEC-10.7.23 Providing, installation, testing and
commissioning of gun metal valves of
following sizes as required.
Make: Newage / Winco / Padmini / Safex.

(a) 50 mm dia 1 No 1750.00
(b) 40 mm dia 1 No 1400.00
(c) 32 mm dia 1 No 1250.00
987 ELEC-10.7.24 Supplying and fixing 63mm dia, 15 mtr long
RRL hose pipe with 63mm dia Male and
Female Gun metal / SS couplings duly
binded with GI wire, rivets etc conforming to
IS 636 (Type -A) as required.
331
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Make: Mini Max / Safex / Newage / Winco / 1 No 6140.00
Padmini.
988 ELEC-10.7.25 Supplying and fixing 63mm dia, 15 mtr long
CP hose pipe with 63mm dia Male and
Female Gun metal / SS couplings duly
binded with GI wire, rivets etc conforming to
IS 636 (Type -A) as required.

Padmini.
989 ELEC-10.7.26 Supplying and fixing First -Aid Hose Reel 1 No 7500.00
with MS construction spray painted in Post
office Red, Conforming to Is 884 with upto
date amendments, complete with the
following as required.
a) 36.6 Mtr Long 20mm (Nominal internal)

dia water hose Thermoplastic / Textile
reinforced / Rubber braided / Polypropylene
Type - 2 as per IS:12585
Make: Eversafe/ Reliance/ Newage/ SRI

b) 20mm (Nominal internal) dia gun metal
globe valve and nozzle.
Make: Newage / Winco / Padmini / Safex.

c) Drum and brackets for fixing the
equipments on wall.
d) Connections from riser with 25mm dia
stop valve (gun metal) & MS pipe.
990 ELEC-10.7.27 Supplying and fixing of hose cabinet of size
750mm X 600mm x 250mm made of No 16
gauge SWG CRCA sheet with 6mm thick
glazed glass door including necessary
locking arrangement suitable to
accommodate 2 Nos 15 mtr long Hose
pipe, 1 No branch pipe, mounted on wall
OR raised brick platform and duly painted
with Post office red externally and white
internally with synthetic enamel paint
complete in all respect, for external hydrant
as required.

Padmini.
332
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
991 ELEC-10.7.28 Supply and fixing 63mm dia Gun metal
branch pipe with 20mm (Nominal internal
diameter) size Gun metal / SS nozzle
conforming to IS 903, suitable for
instantaneous connection to interconnect
hose pipe coupling as required.

Padmini.
992 ELEC-10.7.29 Supply and fixing 4 way fire brigade
connection of cast iron body with 4 Nos
Gun metal Male instantaneous inlet
couplings complete with cap and chain as
required for 150mm dia MS pipe
connection, conforming to IS 904 as
required.

Padmini.
993 ELEC-10.7.30 Supply and fixing 2 way fire brigade
connection of cast iron body with 2 Nos
Gun metal Male instantaneous inlet
couplings complete with cap and chain as
required for 100mm dia MS pipe
connection, conforming to IS 904 as
required.

Padmini.
994 ELEC-10.7.31 Supply and fixing air vessel made of 250 1 No 16000.00
mm dia, 8 mm thick MS sheet, 1200mm in
height with air release valve on top and
flanged connection to riser, drain
arrangement with 25mm dia Gun metal
wheel valve, with required accessories,
pressure gauge and painting with synthetic
enamel paint of approved shade as
required.
995 ELEC-10.7.32 Supply, fixing, testing and commissioning of

15mm size quartzoid bulb type sprinklers of
rating 68C. pendent / side wall with
required accessories.
Makes: SAFEX / HD / TYCO / VIKING / 1 No 490.00

NEWAGE / SHARP
996 ELEC-10.7.33 Supply, fixing, testing and commissioning of
UL approved flexible dropper of 1.5 Mtrs
length with required accessories.
333
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
Makes: SAFEX / HD / TYCO / VIKING / 1 No 1200.00
NEWAGE / SHARP
997 ELEC-10.7.34 Supply and fixing of Pressure Switch in the
MS pipe Line including connection etc as
required.
Make : Danfoss / Indfoss / Approved makes 1 No 2500.00
998 ELEC-10.7.35 Supply and fixing Flow Switches in 100mm

dia MS pipe.
Makes : System Sensor / Switzer / 1 No 5375.00

Approved makes
999 ELEC-10.7.36 Supply and fixing Flow Switches in 150
mm dia MS pipe.
Makes : System Sensor / Switzer / 1 No 7500.00

Approved makes
1000 ELEC-10.7.37 Supply, installation, testing and
commissioning of Bourden type, stainless
steel dial type pressure gauge with
isolation valve and pipe having calibration
of 0-16 kg/cm2.
MAKE: HGURU / FIEBIG and Approved 1 No 675.00

makes
commissioning of 25mm dia Gate valve
Makes : Zoloto / Leader / Approved makes 1 No 1175.00

commissioning of 25mm dia Ball valve
Makes : Zoloto / Leader / Approved makes 1 No 650.00

commissioning of 25 / 20mm dia Air
Release Valve
commissioning of Flexible Sprinkler hose
of size 750mm to 800mm
of size 1000mm to 1200mm
of size 1.50 Mtr
334
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
1007 ELEC-10.7.44 Providing, fixing, testing, commissioning of 1 No 9500.00
installation control valve of Cast iron body
and brass / Bronze working parts
comprising of water, motor alarm, bronze
seat clapper, and clapper arm, hydraulically
driven mechanical gong bell to sound
continuous alarm when the Wet riser /
Sprinkler system activates, pressure
gauges, emergency releases, strainer,
pressure switch, cock valve complete with
drain valve and bypass , test control box,
ball valves, Ms pipe of required size,
flanges, orifice plate, gasket etc of size
150mm dia as required.
Makes : HD / TYCO / NEWAGE
1008 ELEC-10.7.45 Supplying, installing, testing and
commissioning approved make CI body
Foot Valve with brass strainer with
necessary flanges, nuts and bolts etc.,
complete on to the suction line.Rate as per
the lowest quotation of Bharat Fire Safety
Engineers.
Makes:Normex & approved makes

a) 200mm nominal dia 1 Ea 24790.00
b) 150mm nominal dia 1 Ea 13280.00
c) 100mm nominal dia 1 Ea 7450.00
d) 80mm nominal dia 1 Ea 5100.00
1009 ELEC-10.7.46 Supply and laying of 300mm dia NP2 RCC AS per Civil
Hume pipe with Collars for Road crossings SSR
1010 ELEC-10.7.47 Supplying and wrapping the anticorrosive
material for buried pipes with coating of
Primer and wrapping with 4 mm thick
polymer corrosion resistant tape as per IS :
10221 with 15 mm overlap as per
specificatios.
a) 150mm nominal dia 1 Mtr 45.00

b) 100mm nominal dia 1 Mtr 40.00
c) 80mm nominal dia 1 Mtr 30.00
1011 ELEC-10.7.48 Supply, fabricating , installing structural 1 Kg 60.00
steel supports for fixing all sizes of MS
pipes from ceiling / wall with MS Channels,
Angles, Flats, Rods, as required at site with
anchor fasteners, Clamps, threaded rods,
nuts, bolts, washers etc complete with
painting.
335
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
1012 ELEC-10.7.49 Supply of 3 Core x 1.5Sqmm FRLS 1 Mtr 95.00
armoured copper cable as per IS. 7098 /
Part-I / 1988 including all taxes etc.,
complete.
Makes: Universal / Polycab / Finolex /
Havells / RR Kabel.
1013 ELEC-10.7.50 Supply of 3 Core x 2.5Sqmm FRLS 1 Mtr 125.00
complete.
Makes: Universal / Polycab / Finolex /
Havells / RR Kabel.
1014 ELEC-10.7.51 Supply of 4 Core x 1.5Sqmm FRLS
complete.
Makes: Universal / Polycab / Finolex / 1 Mtr 120.00
Havells / RR Kabel.
complete.
Havells / RR Kabel.
complete.
Havells / RR Kabel.
complete.
Havells / RR Kabel.
11.1 GENERATORS SPECIFICATION
1018 ELEC-11.1.1 Supply, Transportation, erection and
commissioning (Excluding Foundation) of 3
Phase, 415, 50Hz, water cooled multi
cylinder diesel generator set with alternator
of - - - KVA/ - - - - - KW out put contineous
rating directly coupled Engine and
Alternator with guard and mounted on a
common base plate of Robust construction
and complete with standard control panel
having IP-52 protection, Acoustic Enclosure
as per CPCB norms , sound absorbing
material, t to restrict sound level up to 75
336
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
dB up to 1 mtr distance and as per CPCB
norms etc as per following specifications
mentioned below.
A. Alternator : Kirloskar / Stamford /
Crompton Greaves / Leroy Somer make.
The alternator of the output rating shall be 3
Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at
1500 RPM. The alternator is self excited,
self regulated, and shall confirm to IS:
13364 of 1992 with regulation of +5% from
no load to full load. degree of protections
shall be IP23.
B.Diesel Engine : Kirloskar / Cummins /
Mahindra & Mahindra Diesel Engine start,
developing suitable -------------- BHP output
at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to
give - - - - -KVA continuous output at 0.8
P.F. lagging at NTP conditions. The diesel
engine shall be capable of providing 10%
O/L for 1 Hr for every 11 Hrs of continuous
running at full load. The engine with 1st
filling of oil and Diesel etc.
01. Exhaust pipe of required size and
length with insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards

and complete with AMF panel having IP-52
protection, Acoustic Enclosure as per
CPCB norms , sound absorbing material,
to restrict sound level up to 75 dB up to 1
mtr distance and as per CPCB norms etc
as per following specifications mentioned
below.
337
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
13364 of 1992 with regulation of +5% from
no load to full load. degree of protections
shall be IP21.
Mahindra & Mahindra Diesel Engine start,
developing suitable -------------- BHP output
at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to
give - - - - -KVA continuous output at 0.8
P.F. lagging at NTP conditions. The diesel
engine shall be capable of providing 10%
O/L for 1 Hr for every 11 Hrs of continuous
running at full load. The engine with 1st
filling of oil and Diesel etc.01. Exhaust pipe
of required size and length with insulation
or clading.02. Diesel tank suitable for 8 to
12 Hours running capacity.03. Residential
Silencer.04. SMF Batteries with leads as
per the Manufacturer standards
C. AMF Control Panel:- AMF control panel
shall be fabricated with 16SWG CRCA
sheet shall be totally enclosed with dust
and Vermin proof, floor mounted / wall
mounted type and shall be comprising the
following.
01. Voltmeter with selector switch.

02. 4 Pole MCCB incomer of ----------A
rating of Schenieder / L&T make for EB and
DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with
fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current
transformer.
08. Input Terminal board and output
Terminal Board.
09. Battery charger with transformer
rectifier unit.
10. Alternator supply air break contactor of
L&T make.
11. Main supply air break contactor of L&T
make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays
and timers with one mode selector switch,
set of push buttons.
14.Control cable up to 15 Mtrs 2.5Sqmm 6
Core
338
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
and complete with AMF panel having IP-52
protection, Acoustic Enclosure as per
CPCB norms , sound absorbing material, t
to restrict sound level up to 75 dB up to 1
mtr distance and as per CPCB norms etc
as per following specifications mentioned
below.
13364 of 1992 or latest version with
regulation of +5% from no load to full load.
degree of protections shall be IP23.
Catterpiller Diesel Engine start, developing
suitable -------------- BHP output at 1500
RPM with mechanical / electronic governing
so as to enable the alternator to give - - - -
-KVA continuous output at 0.8 P.F. lagging
at NTP conditions. The diesel engine shall
be capable of providing 10% O/L for 1 Hr
for every 11 Hrs of continuous running at
full load. The engine with 1st filling of oil
and Diesel etc.
01. Exhaust pipe of required size and
length with insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
C. AMF Control Panel:- AMF control panel

shall be fabricated with 16SWG CRCA
sheet shall be totally enclosed with dust
and Vermin proof, floor mounted / wall
mounted type and shall be comprising the
following.
01. Voltmeter with selector switch.

02. 4 Pole MCCB incomer of ----------A
rating of Schenieder / L&T make for EB and
339
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with
fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current
transformer.
08. Input Terminal board and output
Terminal Board.
09. Battery charger with transformer
rectifier unit.
10. Alternator supply air break contactor of
L&T make.
11. Main supply air break contactor of L&T
make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays
and timers with one mode selector switch,
set of push buttons.
Core
Core
12.1 UPS SYSTEMS

1021 ELEC-12.1.1 Supply and installation of 800VA, 12VDC
home UPS system pure sine wave out put,
single phase input / Single phase output.
Makes: Servomax / Top Power / Amar Raja 1 No 9500.00
/ Samhitha / Microtech / Excide / Sucom.
1024 ELEC-12.1.4 Supply and installation of 2.0KVA true on
line UPS system IGBT technology pure sine
wave out put, double conversion with auto
and manual static by pass switch single
phase input / Single phase output.
Makes: Consul / Power one / Numeric / 1 No 29400.00
Emerson.
340
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
1025 ELEC-12.1.5 Supply and installation of 3.0KVA, 72VDC
true on line UPS system IGBT technology
pure sine wave out put, double conversion
with auto and manual static by pass switch
Emerson.
1026 ELEC-12.1.6 Supply and installation of 5.0KVA,
180/192VDC true on line UPS system
IGBT technology pure sine wave out put,
double conversion with auto and manual
static by pass switch single phase input /
Single phase output.
Emerson.
1027 ELEC-12.1.7 Supply and installation of 7.5KVA,
Emerson.
1028 ELEC-12.1.8 Supply and installation of 10KVA,
Emerson.
1029 ELEC-12.1.9 Supply and installation of 10KVA / 312V DC
on line UPS system IGBT based rectifier
with input power factor correction 32 bit
microprocessor based with isolation
transformers double conversion, SNMP
controls, LCD display, Pure sine wave out
put, with auto static switch three phase
input / Three phase output and modular
structure for better thermal technology /
cooling facility, with warranty up to three
years.
Makes: Consul / Eaton / APC / Numeric / 1 No 185000.00

Emerson.
341
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
1030 ELEC-12.1.10 Supply and installation of 15KVA / 312V DC
on line UPS system IGBT based rectifier
with input power factor correction 32 bit
microprocessor based with isolation
transformers double conversion, SNMP
controls, LCD display, Pure sine wave out
put, with auto static switch three phase
input / Three phase output and modular
structure for better thermal technology /
cooling facility, with warranty up to three
years.
Makes: Consul / Eaton / APC / Numeric / 1 No 212000.00

Emerson.
12.2 UPS BATTERY RACKS AND WIRE
LEADS
1031 ELEC-12.2.1 Supply and providing of UPS cum battery 1 No 1500.00
rack up to 4 batteries
rack 5 to 10 batteries
rack upto 11 to 20 batteries
1034 ELEC-12.2.4 Supply and fixing of 12V 26 AH SMF
battery including wire leads.
Makes : Quanta / Racket / Exide. 1 No 3850.00
1039 ELEC-12.2.9 Supply and fixing of 12V, 120 AH MF
Makes : Amar Raja (Power Zone) or 1 No 9965.00
Equivalent model of Exide / Panasonic /
Gotech.
1040 ELEC-12.2.10 Supply and fixing of 12V, 150 AH MF
Makes : Amar Raja (Power Zone) or 1 No 12750.00
Equivalent model of Exide / Panasonic /
Gotech.
342
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
OLD MATERIAL RATES
S.No Dismantled item : Unit Rate
1 PVC insulated alluminium cables and wires 1 Kg 11.00

2 PVC insulated copper cables and wires 1 Kg 50.00
3 Alluminium Maters 1 Kg 62.00
4 MS / Iron poles, angle etc 1 Kg 25.00
5 Copper/Brass materials 1 Kg 140.00
6 PVC pipe/PVC materials. 1 Kg 5.00
7 IC switches/DBs/Feeder pillers. 1 Kg 13.00
8 All types of Ammeter/Voltmeter / any meter 1 Kg 25.00
9 All types of ACBs/OCBs/VCBs LT 1 EACH 1300.00
All types ofceiling fans/cabin fans/Bracket 1 EACH 150.00
10 fans and pedastal fans etc.
All type Tube light fittings/MV/SV/MH 1 EACH 21.00
11 fittings.
12 All types of accessories such as 1 Kg 11.00
bells/holders/ceiling roses/MCBs/Tube light
starters.
All types of Air circulators/Pedastal Type Air 1 EACH 500.00
13 Circulators
14 All types chokes/condensors/Motor starters 1 Kg 17.00
15 Lift ropes/belt types 1 Kg 20.00
16 All types of electric Motors 1 HP 340.00
17 All types of water pumpsets 1 HP 340.00
18 All types of compressors 1 TR 500.00
19 All Types of AC units (window) 1 EACH 2000.00
20 All Types of AC units (Split ACs) ODU 1 EACH 2100.00
21 All Types of Indoor units of Split Acs 1 EACH 800.00
22 Copper piping of Acs 1 Kg 135.00
23 water cooler instant type 1 EACH 900.00
24 Water cooler storage type 1 Ltr 40.00
25 Refrigerator upto 165 Ltr 1 EACH 1452.00
26 Refrigerator above 165 Ltr 1 EACH 2000.00
27 Exhaust fans 9" 1 EACH 150.00
28 Exhaust fans 12" 1 EACH 200.00
29 Exhaust fan 15" 1 EACH 330.00
30 Exhaust fan 18" 1 EACH 400.00
31 Exhaust Fan 24" 1 EACH 500.00
32 Air cooler of any size without fan 1 EACH 500.00
33 Air cooler of any size with fan 1 EACH 800.00
34 Transformer Oil 1 Ltr 5.00
35 DG Set 1 KVA 1000.00
36 Transformer 1 KVA 400.00
37 EPABX system 1 EACH 1100.00
38 Telephone instrument 1 EACH 50.00
39 Water Purifier 1 EACH 80.00
343
RATE
FOR
SL.
NO.
SOR
2016-17
1 2 3 4 5
40 Invertor/UPS 1 KVA 500.00
41 Voltage stabilizer 1 EACH 500.00
42 Amplifier small 1 EACH 400.00
43 Amplifier Big 1 EACH 450.00
44 Mikes 1 EACH 70.00
Note: Rates of items which are not covered under above List should be caluclated on the
basis of materials / equipments considering its site condition and prevailing market rates
and approval should be taken from the concerned Superintending Engineer(Electrical)
344
PUBLIC HEALTH
ITEMS
PUBLIC HEALTH ITEMS
Sl. Description Unit SoR for
No. 2016-17
1 2 3 4
1 RATES OF LABOUR (SKILLED WORKMEN)
1. Caulkar Per Day
2. Plumber 1st Class Per Day
3. Plumber 2nd Class Per Day
4. Sewer Cleaner Per Day
5. Well Sinker Per Day As per Labour
6. Pipe line Fitter 1st Class Per Day rates of SoR
7. Pipe line Fitter 2nd Class Per Day
8. Pump Operator Per Day
9. Bore Mechanic Per Day
10. Light Vehicle Driver Per Day
Note:The rate at relevant item in common SoR is applicable for occasional
employment.
2 RATES FOR EARTH WORK :
a. Earth work excavation in all types soils for pipe lines, for drainage and water supply,
where the depth is more than 1.5 times the width.
b. Earth work excavation in all types soils for pipe lines, for drainage and water supply, To follow the relevant items
where the depth is less than 1.5 times the width. of Irrigation work items as
per Standard data
c. Earth work excavation in all types soils for open trenches, for valve pits, inspection
chambers, etc.
3. Excavation of pipe line trenches for drainage and water supply in rock requiring
a. blasting with initial lead and lift including cost of blasting materials where the depth
is more than 1.5 times the width, in places where there is no habitation.
b. Excavation of pipe line trenches for drainage and water supply in rock requiring
blasting with initial lead and lift including cost of blasting materials where the depth
is less than 1.5 times the width, in places where there is no habitation.
c. Cutting rock for pipe line trenches by hammers, nuckles and chisels including
stacking where the depth is 1.5 times or more than the width.
d. Cutting rock for pipe line trenches by hammers, nuckles and chisels including
stacking where the depth is less than 1.5 times the width.
e. Cutting rock for works other than pipe lines trenches by hammers, nuckles and
chisels including stacking.
f. For contolled blasting at restricted places
NOTE :- Rock should be measured in solids. In case it is not possible, stacks should
be made in which case 40% for voids to be deducted from the stack measurements.
4 Loading or unloading materials such as C.I. Pipes, PVC Pipes, AC Pressure Pipes, DI
Pipes, SW Pipes, PVC Pipes, A.C/Specials less than 300 mm dia upto 4 m in length
including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as

b. A.C. Pipes & Specials Per Tonne per Standard
data
c. Stoneware pipes & Specials Per Tonne
d. P.V.C. Pipes and fittings Per Tonne
5 Loading or unloading materials such as C.I. Pipes, DI pipes, SW pipes, AC pressure
pipes & fittings/ specials from 300 mm to 600 mm dia upto 4 m in length including
stacking.

per Standard
b. A.C. Pipes & Specials Per Tonne
data
To follow as
No. 2016-17
per Standard
1 2 3 4
data
c. Stoneware pipes & Specials Per Tonne
6 Loading or unloading materials such as C.I. Pipes, DI pipes, PVC pipes, AC pipes less
than 300 mm dia, above 4 m in length including stacking.
per Standard
b. A.C. Pipes & Specials Per Tonne
data
c. P.V.C. Pipes and fittings Per Tonne
7 Loading or unloading materials such as C.I. Pipes, DI pipes, AC pipes from 300 mm to
600 mm above 4 m in length including stacking.
per Standard
b. A.C. Pipes & Specials Per Tonne data
Note:- For loading and unloading the above materials at Railway Stations, the rates
may be adopted based on the competitive quotations or the hammalae charges if
prevailing.
8. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully
a. into trenches and laying them true to alignment and gradient including all sundries
but excluding cost and conveyance of pipes from source of supply (Ref to
specifications. BIS No.3114/1994)
Diameter of Pipe/Fittings in mm : Per Metre To follow as

per Standard
80mm to 1000mm dia
data
8. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends
b. carefully into trench and laying them true to alignment and gradient including all
sundries but excluding cost and conveyance of pipes from source of supply.
(Reference to specifications. BIS No.3114/1994).
Diameter of Pipe/Fittings in mm : To follow as

80mm to 750mm dia Per Metre per Standard
data
800mm dia Per Metre 557.00
9. Jointing CI /DI pipes & fittings with s/s ends including cost of pig lead, Spun yarn
a. and sundries such as cost of fuel for melting lead, filling with water with lead up
to 500m and testing to required pressure complete. (Reference to specifications. BIS
No.3114/94/12288:1997)
Diameter of Pipe/Fittings in mm : To follow as

80mm to 800mm Each Joint per Standard
data
900mm dia Each Joint 14545.00

9. Jointing C.I/ D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the
b. cost of the gasket but including all sundries filling with water, with a water lead up to
500m and testing to required pressure, etc. complete (Reference to specifications IS
3114/1994/12888/1997)
Diameter of Pipe/Fittings in mm : Each Joint To follow as

per Standard
80mm to 1000mm dia
data
No. 2016-17
1 2 3 4
10 Jointing CI/DI pipes, fittings and valves with flanged ends including cost of jointing
materials such as bolts, rubber insertion, white lead including filling with water, with
lead up to 500 meters and testing to required pressure complete. (Reference to
specifications. BIS No.3114/1994.)
Diameter of pipe/Fittings/ valve in mm : To follow as
80mm to 750mm dia Each Joint per Standard
data
11a Lowering the RCC plain ended pipes carefully into the trench laying them true to
alignment and gradient, jointing RCC pipes with cement joints including curing, the
cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing
including filling with water with a water lead upto 500 metres excluding cost of
rubber rings as per BIS No.783/85.
per every 25 mm dia. Per Metre 21.60

11b Lowering the RCC S/S pipes carefully into the ready made trenches laying them true
to alignment and gradient, jointing with rubber rings and testing including filling with
water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985
per every 25 mm dia.

80mm to 600mm Per Metre To follow as
per Standard
data
12 Lowering and Jointing G.I. pipes and specials / fittings including excavation of
trench of 0.5m width and 0.50 m depth in all soils except rock requiring blasting and
refilling trenches after laying and jointing pipes and also including cost of jointing
materials but excluding the cost of pipes. Reference to specifications. BIS No.783/85
a G.I. Pipes :Dia in mm To follow as

15mm to 150mm Per Metre per Standard
data
12b Laying, jointing of PVC/HDPE/MDPE pipes as per BIS No.7634 part-III/75 for PVC
and BIS No.7634 part-II/75 for HDPE pipes including testing-filling with water with
water lead.
Dia in mm
Note:(i) The above rates are applicable for the works in District only.
(ii) If the depth of excavation is more than 0.6 m separate rates to be worked out.
13 Lowering and laying in ready made trench true to alignment and gradient, jointing,
and testing of Stone ware pipes including cost of jointing material such as cement
mortar (1:1) proportion and hemp yarn but excluding cost and conveyance of pipe.
(Reference to specifications BIS No. 6530/72)
Dia of Pipes in mm . To follow as

data
No. 2016-17
1 2 3 4
14 Lowering, laying, jointing and testing to hydralic test pressure including cost of water
with minimum water lead of 500m for UPVC pressure pipes in ready made trenches
true to alignment and gradient including all sundries but excluding cost &
conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 -
Part III - 1975.
Dia of Pipes in mm . To follow as

data
15 Laying and jointing of HDPE pipes in ready made trench by butt fusion welding as
per IS:7634 part-II/1975 as amended from time to time to the alignment and
gradient and testing the pipeline to the required pressure.
Outer Dia of pipes in MM

63mm dia OD Per Metre 37.00
16 Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel
& Reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail
pieces
Dia of Valve in mm. To follow as

80mm to 600mm Each per Standard
data
17 Labour charges for fixing Air valves including boring the mains and threading the
bore fixing nipple etc., complete.
Dia of Air valve in mm.
25mm dia Each To follow as
40mm dia Each per Standard
data
50mm dia Each 173.00
18 Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air
valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and
rubber insertions etc., complete.
Dia of Air valve in mm.
50mm dia (Double Air valves) Each 197.00
No. 2016-17
1 2 3 4
19 Uprooting C.I./ DI Pipes by melting the lead, loosening the joints, scraping the pipes,
hoisting and keeping within a lead of 10 m but excluding earth work excavation and To follow as
refilling. per Standard
data
80mm to 600mm Per Metre
20 Uprooting of RCC pipes including breaking the collars, loosening the joint, seperating Per Metre
the pipes, hoisting and keeping within a lead of 10 m but excluding earthwork To follow as
excavation and refilling. per Standard
data
100mm to 300mm
21 Removing old G.I.pipes and specials / fittings and cleaning, scraping the pipes,
hoisting and keeping with in 50m lead but excluding earth work excavation of
trenches and refilling.
Dia of Pipes in mm To follow as
per Standard
15mm to 50mm Per Metre
data
22 Cutting C.I./ DI Pipes without water in mains.
Dia of Pipes in mm To follow as
80mm to 600mm Each cut per Standard
data
680mm dia Each cut 486.00
23 Cutting A.C. Pipes without water in mains.
Dia of Pipes in mm
24 Drilling and tapping CI/ DI / GI Main and fixing brass screw down ferrule and plug.
10 mm to 20mm Each To follow as

Tapping per Standard
25 mm to 40mm Each data
Tapping
25 Cutting road surface including stacking of excavated materials for pipe line trench
work.
a) Cutting open B.T.Road surface 1 Cum 902.00
b) Cutting open C.C.Road Surface 1 Cum 1878.00
No. 2016-17
1 2 3 4
c) Cutting open Water Bound Macadam/Wet Mix Macadam Road. 1 Cum 231.00
26 Bailing out water.(For PH item)
a) Bailing out water from the pipe line trenches with oil engine driven pumpsets, HP/Hour 54.00
including hire charges, fuel charges and wages for Driver and Helper.
b) Bailing out water from the pipe line trenches with Electric Driven pumpset HP/Hour 40.00
including hire charges, current charges and wages for Driver and Helper.
NOTE:- The rate is payable on the total H.P. hours ignoring fractions less than 0.5 HP
hour and rounding off 0.5 HP hour or more to the next higher integer.
27 Shoring and strutting of trenches for water and sewer main.

a) Single Staging from (0 to 2.5 Mts.) 1 Sqm of To follow as
Shoring per Standard
area data
b) Double staging from (2.5 m to 4.5 Mts.) 1 Sqm of
Shoring
28 Barricading, hoarding, lighting and watching etc., for water supply and sewerage 1area
RMT
To follow as
works for trenches.
per Standard
data
29 Excavation of trenches for infiltration galleries, syphon lines and connecting mains in
all soils under water including all leads, lifts, shoring, strutting, bailing out water and
removal of shoring and strutting materials, after completion of pipe line work.
a) 0 to 1 m deep under water. 10 Cum 12255.00

b) 1 to 2 m deep under water. 10 Cum 17553.00
c) 2 to 5 m deep under water. 10 Cum 26347.00
d) Beyond 5 m deep under water for every additional 1 m depth over item 'c' 10 Cum 5034.00
NOTE:- The above rates do not include rock requiring blasting or chiselling.
30 Laying and jointing perforated RCC pipes inclusive of bailing out water and jointing Per Metre 40.00
with cement fillets and all other incidental charges for infiltration gallery inclusive of
bailing out water by pumping to keep the trench reasonably dry to facilitate the work
excluding cost of perforated pipes and collars.
per every 25 mm dia/mtr.
31 Centring and scaffolding charges for RCC members including all materials and labour
charges for forming and dismantling.
a) for R C C Elevated Service Reservoir of staging up to 15 metre below L W L.
1) Slabs for thickness (150 mm to 300 mm) 3586.00

2) Slabs for thickness above (300 mm) 7170.00
3) Side walls curved surfaces including both sides of wall. 2709.00
4) Side wall straight surfaces including both sides of wall. One Sqm of 2411.00
Centering
5) Dome. area 2937.00
6) Roof Slab. 1807.00
7) Column braces and beams 1209.00
8) Circular braces, ring beams & circular column. 1327.00
9) Conical Slab 2709.00
Note:- For RCC ELSR of staging above 15 m, the % increse in these rates shall be as
follows.
15-18 m ---- 9%
18-21m --- 15%
21-24 m --- 21%
24 m -27m ---27%
above27m --- 30%
No. 2016-17
1 2 3 4
b) For Ground level works/ Below the ground level works :-
1) Slabs 1 Sqm To follow as
2) Beams & Lintels 1 Cum per Standard
3) Sun shades 1 Sqm data
4) RCC vertical walls of plane surface including both sides of wall. 1 Sqm of 964.00
centering
5) RCC vertical walls of circular faces including both sides of wall. area 1227.00
6) Dome 1349.70
NOTE: Scaffolding for every extra height of 1 m or part thereof but not less than 0.5
m.The above centering charges are applicable for water retaining structures only.
32 Lift or delift of materials :

a) Lifting of cement concrete for RCC elevated reservoir. For every 3m height or part 1 Cum 147.00
thereof over the initial lift of 3 m.
b) Delifting the materials such as stones, concrete etc., for concrete below ground 1 Cum 45.00
level for construction of ground level reservoirs, inspection wells, test wells and sump
wells etc., for every 1 m depth or part thereof beyond the initial depth of 4 meters
from ground level.
33 Labour charges for fixing ventilating shafts complete with all accessories. Each To follow as
per Standard
data
34 Labour charges for fixing water closets including fixing of foot rests (for all sizes). Each
35 Labour charges for fixing of flushing cistern including fixing of flush pipes, lead pipe, Each
jointing etc., complete
36 Labour charges for fixing wash hand basin including fixing of inlet and waste pipe Each Relevent
connections etc., complete Building SoR
items
37 Fixing urinal with inlet and waste pipe connections etc., complete. Each
38 Refilling the trench for pipe line with excavated earth including watering and tamping 10 Cum
etc., complete
39( Extra allowance for isolated scattered works viz., valve pits, public fountains, meter Each 50% extra
a) pits and manholes, etc., complete. over the cost
of chamber.
( b) Repairs to the existing mains, interconnections, replacement of valves/specials etc., 150% extra
including the cutting ,jointing, bailing out of water, drying, earth work execavation over the cost
etc., complete, but excluding cost of pipes,valves and specials. of work
40 Removal of wet silt and sludge from sullage drains, with aid of baskets and vessels, 10 Cum 2201.00
etc with initial lift of 3 m and lead of 50 m.
41 Well sinking in sandy and other loose soils under water either by manual labour,
divers, or dredgers, weighting the top of staining to assist sinking etc., including
dewatering and other incidental charges such as hire charges for mechanical
equipment etc.,
Upto 2 m below GL/m Per metre To adopt as

From 2 to 4 m below GL/m Per metre per Standard
data
From 4 to 6 m below GL/m Per metre
Note:-Below 10 m for every metre depth or part thereof add Rs.250/- per m. For
higher dia, observed data is to be prepared and got approved.
42 Sinking in Hard strata other than rock but in soils like limestone, gravel, clay under Observed Data
water including, pumping dewatering, hire charges for mechanical equipment etc.,
complete.
No. 2016-17
1 2 3 4
43 Rates for OHSRs/ELSRs including fixtures with a staging of 15 m, with seismic
analysis Zone -II (Rate in
Rupees)
a 500 Kilo litres Per litre 16.00

b 1000 Kilo litres Per litre 13.64
c 1500 Kilo litres Per litre 12.61
d 2000 Kilo litres Per litre 11.93
e 2500 Kilo litres Per litre 11.30
1) The above rates are arrived with base rate of Cement Rs.5500/- per MT & Steel for
Rs.33,000/- per MT for the month of May-2016
2) All concrete components shall be designed with M30 Design Mix proportion.
3) For intermediate capacities proportional rates shall be adopted.
4) The foundations shall be designed for Annular Raft Footings.

The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for
SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be incresed by 2.5% on
basic rate .
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on
basic rate up to 20 T/Sqm.
c) For SBC below 10T/sqm , solid raft shall be provided and for solid raft the rate
shall be increased by 10% on basic rates
5) For staging less than 15 m, the rate shall be decreased by Rs.0.05 paise on basic
rate per litre per every metre decrease in staging.
6) For staging above 15 m, the rate shall be increased by Rs.0.10 paise on basic rate
per litre per every metre additional staging.
7) The above rates shall be increased / decreased due to increase/decrease in the
cost of cement by
Basic rate x (Rc-5500)/5500 x 0.07
Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate.
8) The above rates shall be increased / decreased due to increase/decrease in the

cost of Steel by
Basic rate x (Rs-33000)/33000 x 0.2
Rs = Rate of Steel (Rs.per MT) at the time of preparation of estimate.
The above formula applicable only for preparation of estimate. The price adjustment
shall be adopted on the actual consumtion of Steel and Cement.
9 a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner
surface of the Reservoir including roof.
b) Rate inclusive of 2 coats of weather proof emulsion painting for external surfaces,
lettering, all required fixtures, Pipes,Pipe specials, valves of DI material, Valve
chambers etc., for pipe connections including cost of pipes,specials and valves as per
departmental directions and drawings.
10) The above rates adopted for a wind pressure upto "250 kg/sq m". For every 100
kg/sqm decrease in wind pressure, the rate shall be decreased by 5%
11.a)The Basic rate is adopted by considering the design for Seismic forces for Zone-II
only of seismic zones.
b) The basic rates shall be increased by 15 % for
Zone-III of seismic zones.
12. The ELSR/OHSR shall be designed with minimum of two rows of columns for
capacities above 500 KL & upto 1000KL.
13. The ELSR/OHSR shall be designed with minimum of three rows of columns for
capacities above 1000KL.
No. 2016-17
1 2 3 4
14) The basic rate is inclusive of following Fixtures
i) Pipe connections & Specials with D.I materials
a) All pipe conections for Inlet, Out let (2 Nos), Over Flow, Scour pipes shall be
provided with D/F DI material.
b) The Valves for above pipe connections also shall be of DI material of PN 16
c) All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall
be of DI material.
II) The sizes of the verticals for ELSR/OHSR shall be:

a) For 500 KL to 750 Kl ELSRs
Inlet Pipe - 300mm dia.
Out let Pipe - 350mm dia and DI Valves 02 Nos
Over Flow pipe - 350m dia
Scour Pipe - 200mm dia
b) For 800 KL to 1500 Kl ELSRs
c) For above 1500 KL to 2500 Kl ELSRs

iii) Manhole Frames & Covers
All man hole Frames & Covers shall be made of CI/DI materials with min. size of
0.60mX 0.60m - For Roof & Valve Chambers.
iv) CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top
dome and slab with mosquito/fly proof nets - 4Nos.
v) RCC phenial ventilator with fly/bird protection with GI mesh - 1 No.
vi) RCC precast ladders of 0.60 m width - 2 Nos.
vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C
hand railing of 1.0 m height 1 No
viii)The staircase shall be enclosed with brick masonary walls on three side and
st
collapsible MS gate on front side up to 1 brace level, to prevent unauthorized entry.
ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover
slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The
Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm
thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.
x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using
Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of
40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an
interval not more than of 1.00m c/c.
xi) Water Level Indicator of reputed make Digital type (1 No) and Conventional type
(1 No)
xii) Lightening Arrestor with all its accessories complete including earthing,with
relevant IS Codes - 1 No.
44 Rates for OHSRs/ELSRs including fixtures with a staging of 12 m for Zone-II Seismic
. (Rate in
Rupees)
a Upto 10,000 Litres capacity Per litre 72.13
b 20,000 Litres capacity Per litre 42.90
No. 2016-17
1 2 3 4
c 40,000 Litres capacity Per litre 34.53
d 60,000 Litres capacity Per litre 23.58
e 1,00,000 Litres capacity Per litre 19.34
f 1,20,000 Litres capacity Per litre 18.86
g 1,50,000 Litres capacity Per litre 18.14
h 2,00,000 Litres capacity Per litre 16.94
i 2,50,000 Litres capacity Per litre 16.41
j 3,00,000 Litres capacity Per litre 15.89
k 4,00,000 Litres capacity Per litre 14.02
l 4,50,000 Litres capacity Per litre 12.14
NOTE: -1) For intermediate ranges proportional rates may be adopted. All VRCC
shall be in M30 grade design mix.
2)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with
RAFT FOUNDATION for footing and a rate of Rs.5500/- per tonne for cement and
Rs.33,000/- per tonne for steel for the month of May-2016.
3) For every metre of staging less than 12 m, the rate shall be reduced by Rs.0.05
paise per litre per every metre of difference in staging.
4) For every metre of staging above 12 m , the rate shall be increase by Rs.0.10 paise
per litre per every metre of additional in staging.
5)The above rates shall be increased / decreased due to increase / decrease in the
cost of cement by
Basic Rate x (Rc-5500)/5500 x 0.07
Rc = Rate of cement (Rs per MT) at the time of preparation of estimate
6)The above rates shall be increased / decreased due to increase / decrease in the
cost of steel by
Basic Rate x (Rs-33000)/33000 x 0.2
Rs = Rate of steel (Rs per MT) at the time of preparation of estimate.
The above formula applicable only for preparation of estimate. The price adjustment
7) Rate inclusive of three coates of food grade epoxy paint to inner surface of the
reservoir including roof dome.
8) The above rates be adopted for estimate purposes for construction of ELSR for a
finished work including 2 coats of wheather proof emulsion painting for external
surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections
but excluding cost of pipes,bends and valves as per departmental designs and
drawings.
9) The above rates are applicable for wind pressures upto 250 kg / sq m .For decrease
in wind presure the rate has to be decreased by 5% per every 100kg/sqm. If the ELSR
/ OHSR is to be designed for seismic forces also, cost shall be arrived by working out
detailed quantities based on the designs.
10)If the ELSR is to be designed for seismic forces

a) The above rates are applied upto Zone-II earth quake. b) for Zone-III earth quake
the above rates are to be increased by 15%.
11) Fixtures include :

a) RCC or Aluminium ladder inside 0.60 m wide.
b) RCC spiral staircase with RCC railing on the outside shall be provided upto 200KL
ELSR. Above 200KL ELSR Capacity dog legged staircase with Steel railing shall be
provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S
railing upto 1.0 height.
c) Lightening arrestor, including conductor and earthing etc with relevant IS codes.
d) RCC ventilators with copper or stainless steel fly proof mesh.

No. 2016-17
1 2 3 4
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2
Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1
No.
g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall
be provided for single column OHSRs only.
h) Minimum staging for all ELSR/OHSR shall be 12.0mts.
i) The increase in staging shall be at 1.0mt interval.
j) The railing provided to the gallery and staircase shall be with stainless steel of
grade 304 for a height of 1mts.
k)The dog legged staircase shall be enclosed with brick/CRS wall on three sides and
front side with PVC door of standard maker up to 1st brace level from ground level to
prevent unauthorized entry.
l) D.I swan neck ventilators shall be provided in top dome and slab.
m) The above rates are exclusive of all inlet, outlet connection and valves. All valves
near inlet, out let and for scour of ELSRs shall be D.I valves.
45 Construction of Rapid Gravity Filtration Plant including all civil, mechanical and
electrical works using sand as filter media, duly following relavant IS codes in the (Rate in
design of plant components including trial running for 90 days etc., complete. Rupees)
1) 2.0 Mld Per litre 4.62

5) 30.00 mld and above. Per litre 2.39
NOTE :-
a) For intermediate capacities proportional rates may be adopted
b) The above rates are applicable with cement @ rate of Rs.5500/-MT and steel of Rs.
33,000/MT for the month of May-2016.
c)The above rates shall be increased / decreased due to increase / decrease in the
cost of cement by
Basic Rate x (Rc-5500)/5500 x 0.07
Rc = Rate of cement (Rs per MT) at the time of preparation of estimate.
d)The above rates shall be increased / decreased due to increase / decrease in the
cost of steel by
Basic Rate x (Rs-33000)/33000 x 0.2
Rs = Rate of steel (Rs per MT) at the time of preparation of estimate.
e)The above formula applicable only for preparation of estimate. The price adjustment
The components of the filtration plant will include the following
A) Civil Works
(All works of VRCC Shall be in M30 design mix)
1) Stilling Chamber including Areation cascade
2) Pre-Settling tank shall be provided for 30 MLD and above capacities of WTP for a
minimum of 1 hour capacity.
3)Raw water channel with Stainless Steel Weir of SS304L Grade material and also
with digital flow meters.
4) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS
Blades with gear wheel arrangements etc, Using 304L Grade Steel.
No. 2016-17
1 2 3 4
5) Clariflucculator / Flocculation tanks with the components of central driven circular
clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L
tubes /angulars for durability & chemical resistant with wheel arrangements etc,.
6) Filter house, Chemical house, Alum store, Laboratory room , Chlorination plant
room, toilet etc. (All structures shall be provided RCC roof only).Chemical house &
Chlorinator rooms are to be isolated.
7) Wash water tank of suitable capacity shall be constructed independently
8) All the Doors and Windows shall be of Aluminium.The entrance door shall be
minimum size of 2.40 X 2.40 mts.
9) All pipes and valves in Plant shall be of D.I. materials. All the Connecting pipes of
the plant components such as from Flash mixer to Clarifloculator/
Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I.
material. The size of sludge disposal pipe shall be minimum of 450 mm dia with D.I
D/F pipe.
10) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be
sufficiently spaced for easy operation,maintenance and inspection .
11) The bottom level of the wash water control chamber must be above G.L so as to
dispose the wash water and sludge from Clariflocculator by gravity to disposal point.
Additional specificaions
12) Railing for all the components (Clarifloculator, Filter House, Staircase etc shall be
provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia pipe
for top horizotals,25mm dia for middle row and 40mm dia verticals spaced at interval
of not more than 1.00m c/c.
13) Inspection / Path ways in filter beds : Middle pathway: Minimum of 1.50m,Side
pathway: Minimum of 1.20m.
14) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room,
Laboratory) shall be provided with Non-skid tiles of approved make & quality , as per
standard specifications.Dadooing shall be provided upto 1.80mts from floor level in
chemical room, Chlorination room.
15) The basement of the Filtration plant building shall be minimum of 0.75m above
the existing nearby Road top level.
16) Minimum head room of 2.00m shall be provided , at the alum mixing chambers
in alum store for inspection & maintenance.
17) The minimum width of entrance hall for the Filter House shall be 4.50m , and
Laboratory, of min size .of 3.30 X 4.50m .
18) High efficient Air Blowers of standarded make shall be installed to the design
requirement with low noise pollution , environmental pollution as per PCB guide lines
& Testing of blowers as per I.S norms at site.
19) UPVC pipes shall be provided for water drain.Filter pipe manifolds shall be
assembled with HDPE pipes.
20) Alum storage capacity shall be designed for minimum period of 90 days.
Consumables shall be provided for 2115 Running Hours of WTP.
21)
A) Chlorinator : Vaccum type chlorinator shall be provided with following
specifications:
a) Vaccum operated solution feeding type Vaccum Regulator, Rotometer, Rate setting
Valve, built-in NRV, Gas Overflow out let by manifolding to mount the system with
the unit.
No. 2016-17
1 2 3 4
b) The unit shall consists of Ejector with necessary accessories such as Check Valve,
Drain Valve and Vacum relief Valves - for control of chlorinator dosage.
c) The Accessories and manifolds shall be chlorine resistant and made of carbon steel
seamless pipes, copper tube with brass fittings of suitable size & dimensions, with
diaphram sealed chlorine pressure gauge arrangements.
d) Water Boosted Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr,

with Head ranging from 16 to 35 MWC
e) The water & solution carrying pipes shall be made of UPVC material of suitable size
incl.all specials such as Tee's , Bends, couplings & NRVs and also Pressure Gauges of
suitable range.
f) Chlorine Gas detector with alarm indicator.

The following are the specification for Gas Chlorination System for 13 MLD STP Plant
1) Chlorinator and Chlorine gas line :

Chlorinator with flow indicator and flow control valve of Capacity : 2kg/hr containing
inbuilt accessories like Filter, Rotameter with Dose rate adjuster etc, Test Pressure: 5
Bar
Material of Construction (MOC ): PVC/ VITON/ HASTELLOY C4/ NICKLE PLATED
BRASS , PVDF, BOROSILICATE GLASS, MONEL etc
2) Vacuum and Vent Rating

Rating 10 Bar, Dia 8/12 mm, MOC: PE Tubing
3) Gas Filter
Capacity : 10 KG/ HR , MOC (Body ) : Carbon Steel , MOC (Media ) : Glass Wool +
Monel Mesh , Connection : Flanged ASA 300
4) Power water line and its accessories:

- Power water line upto ejector flange with all accessories and fittings as per P & I
Diagram :
Booster Pumps (Centrifugal, Vertical type) , flow : 1.5 m^3 /hr , Head : 70 mtr, Motor
Rating 1.1 KW , 2900 RPM
Isolation valve and Strainer on booster pump suction- Type : Sluice , Connection :
Threaded , Size : 1 , MOC : Brass
Non Return valve & Isolation valve on booster pump discharge- Type: Wafer,
Connection: Threaded , Size : 1 , MOC : Brass
P .G on pump discharge line with isolation valves : Range : 0 to 10 Bar , process
connection : 0.5 BSP ( M) , Type : Bourden
5) Chlorine solution line:

- Ejector with built in check valve assembly: Type Fixed Throat, Model : Type E, MOC
: PVC, VITON , Connection 05 Union PVC -Chlorine Solution line with fitting from
ejector delivery upto Dosing point: MOC: PVC , MAKE : Dutron , dia : 15 mm , Rating
: 10 Bar
- Diffuser for Dosing in Tanks : MOC PVC , Length : 3 mtrs, Dia :15 mm, Make :
Toshcon Jesco
6) Empty Toners : Make : ISGEC , Design pressure : 20.63 Kgf/cm2 (g) , Design
Temperature : 65 Deg C , Material of Construction : 516 Grade 60 , Longitudinal Shell
Joint and Head to Shell joint : Fusion Welded , Radiography : 100 % , Hydraulic Test
Pressure : 30 kgf/cm2 (g), Design approval : Lloyds Register Asia , Tare weight : 620
kgs , Water Capacity :780 kgs , Chlorine Capacity : 928 Kgs
7) Roller Support Assembly : MOC : MS Structure without Gun Metal Bushings Duly
Painted , Load Capacity : 2 Tons.
8) Auxiliary Ton Container valves (yoke) with clamps : MOC : Al-Si_Bronze , Monel ,
PTFE etc, Rating : 35 Bar , Connection 5/8 BSP (M)
No. 2016-17
1 2 3 4
9) Valves and Accessories:
-Flexible connector with Isolation Valves : Length: 1.5 m, MOC : Copper , Brass ,
Connection : 5/8 BSP union(F), Pressure Rating : 15 Bar
- Header Line Isolation Valves: MOC: Al-Si-Bronze , Monel , Panel , PTFE etc, Rating :
35 Bar, Connection : 5/8 BSP (M)
- Gas Filter inlet/outlet isolation valve: Size 0.75 , MOC: CF8M, Rating :18 Bar, End
Connection : Flanged ASA 300
- Pressure Indicator Isolation valve : MOC : CF8M, Rating : 15 Bar, Connection : 0.75
BSP, Seal Material :PTFE
- Chlorine Solution Line Isolation Valve : MOC : PVC , Make : Dutron , Size : 15 mm
-Diffuser Isolation Valve : MOC : PVC , PTFE , Make : Dutron , Size : 15 mm.
10) Instruments :
- Chlorine Leak Detector Double Alarm sensor with Audio alarm in Building & Panel :
Make : Toshcon Jesco , Alarm Pre Set Level : 2 PPM (low) , 5 PPM (High) , Type :
Electrochemical , Display : 7 Segment LED , Cabinet : Polycarbonate , Transmission
Output : 4-20 mA
11) Safety Equipments :

- Cannsiter Type Respirator with full face Coverage : Make : Grouptech , Accessories :
Full Face Mask
-Ammonia Bottle with leak torch : Quantity : 500 ml , Make : Merck/Equ
- Gloves , Rubber Boots , Apron , Google and Helmet : Size : Universal
- Emergency Eye wash shower and Basin : Make : J.K Enterprises, MOC: G.I , ABS
Plastic , Required Water Pressure : 1 Bar , Inlet Connection : 1.25
- Self Contained Breathing apparatus Complete with Warning Whistle ( Type Full
face) : Make : Group Tech , Accessories : Storage Bag, Carrying Harness , Demand
Valve type Full face mask , Warning Whistle , Duration : 30 mins - Emergency Kit B :
Make : J.K Enterprises , Type : B for Tonner
12) Chlorine Leak Absorption System :

- FRP Hood on Tonners : MOC : Isopthalic Resin , Type : Full , Colour : Pigmented
Yellow , Thickness : 4 mm
- ID Fan : MOC : FRP , Make : TCF NADI , Motor Rating : 2.2 kW, 2830 RPM, Head:
300 MMWC, Flow : 1000 m3/hr , MOC of Wetted parts : MS + FRP lining ,
Inlet/Outlet Connection : Flanged
Flex Hose from FRP Hood to ID suction : MOC : PVC, Dia : 4 , Rating : 10 Bar, Make :
Dutron
- Flexi Hose from ID fan discharge to Chlorine Gas leak Absorption Pit : MOC : PVC ,
Dia : 4 , Rating : 10 Bar, Make : Dutron
Additional Items :
1) Pressure Reducing Valve MOC: Carbon Steel , Viton , PTFE , and Hastelloy C4 etc
, Up stream Pressure : 15 Bar , Down Stream Pressure : 2.5 Bar ( Adjustable
) , Connection : Flanged ASA 300
2) Control Panel for Chlorine Absorption system.
i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator

Rate .073 paisa on basic rate of WTP-for Post Chlorination
ii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator

iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator

B) Mechanical Equipment
No. 2016-17
1 2 3 4
1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical
resistance. (Alam tanks must be bound with corrosion resistant material (HDPE
Lining, Bitumen Coating, tiles etc)
2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical
resistance.
3) Filtration plant equipment instrumentation and piping.
4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge

arrangement etc.,The equipment consists of following components
a) Flocculator Drive Mechanisms
These will consist of suitable H.P geared electric motor mounted on M S Frame work
on bridge platform.
b) Flocculating Mechanisms and raking in the flocculation compartment .
These will consist of vertical M S shafts and arms, wooden paddles, guides, bearings
etc with stainless steel bush bearing for the shafts at the bottom. The paddle area
shall be between 10 to 25 % of the cross section of flocculating zone
c) Mechanism for raking in clarifier compartment.
d) Revolving Bridge
This will be made of M S sections with torsion proof fabrication of required length and
width of 1.22 m. The scrapper frame work of M .S section shall be hung from bottom
of the bridge. The Bridge will have an outer travelling trolley. The walk way will be
1.22 m wide and shall have chequered plates. The web of the bridge structure shall
perform the function of hand railing on both the sides also. The scarping plates will
be fitted with the scrapper frame work with hinges and stainless steel pins and will be
fitted 12 mm thick rubber ledging . The scrapers will be so adjusted as to ensure
smooth and even scarping of the floor.
e) Bridge Drive
The Bridge will be driven by an electrically operated geared motor with suitable H.P.
f) Bridge Drive Mechanisms

This will consist of two nos of steel wheels driven by electric geared motor. The wheels
will be fitted on the trolly with necessary bearings, pedestals etc . These wheels travel
along the periphery of the clariflocculator tank on rails.
g) Electrical Arrangements
These will consist of electrical cables PVC insulated with copper wires run from the
main switch board provided in the chemical store and run under the tank and along
the central column. The cable will be connected to the central slip arrangements. The
electric geared motors will be controlled from the control panel fitted on the bridge
with necessary weather proof housing cabinet with necessary cables, wires, starters ,
switches etc .
5) Stainless steel wheel shall be provided for the bridge clariflocculator.
6) Wash water tank fittings and pumpsets with 100% stand by.
7)Air blower with motor 100% stand by and pipe connections.

Air Scouring type with twin lobe rotary having required capacity and pressure as per
hydraulic design having following components:
Blower, Base Frame for blower and motor, Foundation Bolts, Nuts and Washers, Slide
Rail and Motor Bolts, V Belts, Pulley, Guard, Suction Silencer, Discharge Silencer,
Safety Relief Valve and Non Return Valve , Companion Flange, Interconnection Pipe,
Flexible Bellow, Safety Valve and T Connection, First Fill of Lubricants, Anti vibration
Pads, Acoustic Enclosure and Motor : CGL/KEC/ABB make.
No. 2016-17
1 2 3 4
Materials of Construction :
a) Housing : C.I IS 201 FG 260
b) Rotor Shaft : S G IRON
c) Shaft : EN 19 forged and heat treated
d) Timing Gears : Cast Alloy steel ( 20 microns) forged and heat treated .
e) Pulley , Gear side , plates and covers : C.I IS 210 FG 260
f) V Belts : Reinforced rubber
g) Base plate : MS Enamel Painted
h) Belt Guard : MS Enamel Painted
i) Fasteners : As per IS 1363/ IS 1367
8)Spares & Tools and the same shall be handed over after 2 years defect liability
period.
9)Gaseous Chlorination with cylinders has to be provided with protection measures.
C) Electrical Equipment
1) Necessary power supply wiring to motors and switches bus bar connections as per
IE Rules.
2) Internal wiring and illumination and fittings and fixtures for internal and external
lighting exhaust fans, ceiling fans etc.
3) Erecting mechanical and electrical equipment, trial run for 90 days 23.50 hours
per day testing the treated water for efficient standards and maintenance of records
and imparting training to staff.
4) Supply of 6 - Sets of completion plans and maintenance manual and brochures.
5) All cables shall be with of copper material, Cable ducts shall be covered with MS /
Aluminum chequed plate.
6) Yard lighting shall be provided at 6 locations with required fixtures..
D ) Equipment for Flow measurements
1) Equipment for Flow of Conductivity, Turbidity, Ph value, Residual Chlorine with

recording & data storage facility (Computer based) & Alarm by SMS or other methods.
2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water & // ATTESTED //
Clear water flows by installing Digital Flow meters to measure the flows at Raw water
Channel and at each filter bed individually and combined for measuring the
quantities of water treated with a facility to record and store the readings & also to
send messages to the assigned designatories about the variations/ deficiencies in the
flow including alerts for back wash requirements of filter beds, and recovery of data
for the past 360 days. All the Digital Flow Meters & Pressure Gauges shall be
provided of standard approved make.
Hardware:
i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter
bed out lets with accessories.
ii)Electrode Type: General type, Scraper type or replaceable type Electorde made with
material of SS external Ultra Touch Sensors as per requirement.
iii)Customised Application Requirement : Sensors with Interface logic control board
with serial interfaces, On - sensor Board Buffer, Timer, RS485 Communication,
Analog to Digital Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power
Supply System , LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed
Wash Indication Button and memory of Data Storage for 30Days , status of Filter
Bed Level indicator, Rating, Reading on LCD Display, Menu Driven Data for sending
to Onsite Big Display, operated with Battery Power of any reputed make or any
equivalent make.
No. 2016-17
1 2 3 4
iv)Customised Application Requirement: Power Sensors Interface logic control board
with support 8 Power Sensing tags, Central System Interfacing Communication, On -
board analog to Digit Convert Integrate Circuit of any reputed make or any equivalent
make.
v)Customised Application Requirement: Centralized System with two serial

interfaces, 3 Nos of Add-On ports, One external DC Power Socket, On - Board Buffer,
On - Board Timer, On - Board RS485 Communication, On - Board RS 232
Communication, On - Board GPRS/GSM Module, On - Board Voice Chip, On - Board
Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop
Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display on
LCD Display, Menu Driven, Menu Navigate Keypad, sendind data to the Web Server,
Communication with GPRS , operated with Battery Power of any reputed make or
any equivalent make.
Software:
The software shall be designed with Web Domain with Data Base Server and Web
Name as per the directions of the Departmental Authorities
The application of Software for Web design & Desktop shall meet the following
requirements:
Onsite Display: Letters with size of 1.5 Seven Sigment LED Display with Interface for
each Filter Bed, for Onsite Display, by displaying the Bed Leves, Ratings, Readings in
3 Columns , for each bed of the plant in succesive rows and cumulative results at the
bottom of the screen.
Off Site Display: Letters with size of 1.5 seven Sigment LED Display with Interface
GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total
Cumulative Reading as specified on On-site Display Features.
The system shall have also the features of Onsite Bed Wash Voice Precautions for
Bed Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level
Triggering, before & after Bed wash.
The software shall also have the features of sending messages to the mobiles of the
Departmental designatories indicating Bed Low Levels,Power Supply timings, Bed
Wash timings and its status, Power Supply timings and its status Grid View Table,
Motor Working time and its status Grid View Table, all trigger events and schedule
information and including all Snap View Reports, all Daily, Monthly, Yearly Reports,
all Power Working Reports, all Power Events Information etc,.
Sewage Treatment Plants

1 Moving Bed Bio Reactor Technology (MBBR)
Designing (Hydraulic, process, structural and aesthetic), providing construction,
hydraulic testing, commissioning and giving satisfactorily trail run for 3 months of
STP consisting of inlet chamber, Screen Chamber, Grit Separator, MBBR (Based on
technologies providing attached growth on plastic media kept suspended in the
sewage due to low density of plastic & provided with diffused air for aeration with
tank. secondary clarifier, sludge collection sump, Gravity Sludge Thickener, Chlorine
Contact Tank, Chlorinator Room, Sludge Dewatering Equipment, associated piping
work with required valves, gates, drains, Administration Block cum laboratory
associated buildings, Laboratory Equipments, inclusive of mandatory spare parts and
instrumentation, etc., complete as tunkey job with all involved civil, electrical,
instrumentation and mechanical works inclusive of following items, units as per
detailed specifications for Civil, electrical, instrumentation and mechnical
components with all duties and taxes etc., complete to achieve BOD < 10ppm, TSS <
10ppm, Biological TN < 10ppm & PO4 < 2ppm to get recyclable quality of water for
industrial/agricultural purposes. The coagulant Dosing System is mandatory for
chemical phophorus removal. All units shall be interconnected with administration
building by suitable or RCC overhed walkways.
No. 2016-17
1 2 3 4
Min. freeboard of 0.3m shall be maintained unless otherwise asked for 0.6m
stipulated for specific units.
A Primary Treatment
1 Inlet Chambers:
Designing, Providing and constructing RCC (M:30) inlet chamber for the peak flow as
per CPHEEO Manual including necessary excavation in all types of strata including
walkway all around the periphery. Inlet chamber having minimum HRT of 60
seconds, each compartment will have steel gates with extension rod, head stock
operation wheels. GI pipe railing etc.,. The work includes providing and making
necessary arrangements to connect the flow to screen chamber by approach channel
as directed and as per speficiations.
2 Screen Chambers:
Designing, providing, constructing, testing and commissioning of two approach
channels (min 4.5m long), mechanically cleaned bar rack screen (6mm clear opening
10mm the flats), Escalator Screens, with 10% standby manual fine screen (10 mm
clear opening) MOC : SS316, CI sluice gates (one before screen & one after screen),
designed as per CPHEEO Manual in RCC (M-30). Including inlet pipe/Channel from
inlet chamber, outlet pipe/channel to detritus tank, free board of 0.5 m minimum,
RCC walkway 1.2 m wide with GI pipe railing. RCC stair case of 1.2 m width from GL
to screen chamber with operation platform and belt conveyor system inclu. panel &
push buttom switch at local level as well as MCC room for two way control.
3 Grit Chamber:
Designing, providing and constructing Grit Chamber - Detritus or vortex type or
aerated type (100% standby), mechanically operated in RCC (M 30) capable of
removing 100% of 0.2 mm size particle and above, having specific gravity 2.40 HRT of
1 Minute at average flow (Detritus Tank) horizontal velocity not exceeding 0.30 m/sec
(Detritus Tank) at peak flow with suitable arrangement of separation of Grit from
putrescrible solids. Inlet and outlet channels of required sizes as may be required to
connect the flow to connecting unit etc. Complete including hydraulic testing for
water tightness of structure having minimum FB of 0.3 m, wash out arrangement of
Grit Chamber and platform 1.2 m wide RCC walkway with GI pipe handiling shall be
provided. A pit for collecting grit conveyed by conveyor shall be provided. It should be
suitable to handle the Grit for carting. All arrangements shall be as detailed
specifications and as directed.
4 Parshall Flume having head loss limited to 0.15 m with necessary flow measuring
devices/meter consisting of digital indicator in LPS & MLD.
B Secondary Treatment
5 Distribution Chamber
Distribution chamber with Cl sluice gates for each basin of MBBR and bypass
chamber, min. 3m x 2m of required depth, operating platform with Cl pipe to connect
to MBBR basins. Bypass pipe from distribution chamber upto inlet of CCT shall be
provided in RCC pipe with manholes and Cl sluice gates.
No. 2016-17
1 2 3 4
6 MBBR Tank
Minimum Total HRT of 6.0 hours (at average flow with Aerobic Detention Time 4.5
Hrs & Anoxic Detention Time -1.5 Hrs), Designing, providing & constructing in RCC
(M-30) biological reactor tank for removal of BOD and T-N to handle the average flow
& having hydraulics suitable to handle peak flow conditions with suitable 1.2m wide
walkway, expansion Joints as required, Including foundation etc as per
specifications. The tank shall be equipped with Inlet & outlet arrangement, process
air blowers for supply of air, fine bubble diffusers of EPDM material / Coarse bubble
aeration grid in SS-304, PP (virgin plastic material of minimum 600 m2 specific
surface area/ m3 ) carrier bio media etc. FB of 0.5m & SWD as required should be
complete as per detailed specifications. The outlet of tank shall be provided with
strainer (SS-304) for preventing escape of Media from the tank. (One unit upto 10
MLD and two units for more than 10 MLD) Air pipe of Gl and Sub water pipe of SS316
material. Volume of the bio media shall not be less than 20% of the volume of the
tank. Process air blowers of rotary twin lobe shall be capable of providing adequate
oxygen for biological process to maintain minimum DO of 2 mg/lit in MBBR basin
and also to keep media In suspension. In addition there would be internal sludge
recirculation facility from Aerobic Tank to Anoxic Tank as per standard Design
practice.
7 Process Air Blowers or aeration Device

The Plant should be based on Dissolved Oxygen/Oxygen Uptake Rate Control with
VFD driven Aeration Device.The Aeration System shall be designed for 110 %
Capacity of the design Air raquirement. The aeration BIower/Aeration Device shall be
having 100% installed standby unit. Air diffuser shall be of disk/ tubular type,
fixed/retrievable. The wetted part of the aeration system of non-corrosive materials
such as UPVC.
Blowers shall be housed in process air blower building. The minimum area of the
building is 20 sq.m, and height of 5m (min). The surface Aerators are not acceptable.
8 Secondary Clarifier
Designing, providing & constructing In RCC (M-30) water tight secondary clarifier as
per design guidelines by CPHEEO manual. The settler shall be provided with a
scraper mechanism in MS with epoxy painting for collecting the settled solids at the
bottom .The sludge will be collected in sludge sump by gravity & supernatant will flow
over a weir & will be collected in a launder.
Return Sludge pump House - wet well with minimum HRT of 60 minutes upto flow of
80% of return sludge capacity and depth of sludge to be limited to 2m, separate panel
room outside wet well, 100% standby pumps.
9 Raw Sludge Pump House

Sump with minimum HRT of 30 minutes & depth of sludge limited to 2 m, 4.5 m
minimum diameter, separtate panel room outside the wet well.
C Tertiary Treatment
Coagulant Dosing System/ Flash Mixer + Flocculation + Settling Tank/
Clariflocculator. The design values of the tertiary treatment units are to be considered
from CPHEEO Manual on Water Supply & Treatment
10 Flash Mixer
Rapid mixing device design confirming to IS: 7090 of 1985, Detention time 60 sec,
velocity gradient 300-400 sec-1 with fans gear and motor assembly as per design.
11 Coagulant Dosing System

Dosing Tanks- 2Nos. With mixing, carrying, dosing with piping arrangement.
Chemical Storage area as per data/specifications.
No. 2016-17
1 2 3 4
12 Flocculation Tank
RCC Hopper bottom units having slope > 45 Deg as per hydraulic and process design
with detention period 20 minutes with flocculator paddles with gear and motor
assembly as per design. Flocculator design conforming to IS: 7208-1974 (Type-C).
Surface loading rate 8000 litere/hour/sq.m and depth 2.5m using PVC media with
supporting arrangement and sludge collecting pipes as per detail specifications.
13 Filter Feed Sump & Pumps

14 Pressure Sand Filters for STP capacities less than 10MLD
15 Rapid Sand Gravity Filters with shed
15 a. Filter Sand
Effective size 0.45 to 0.7 mm, uniformity coefficient not more than 1.7 nor less than
1.3, depth of sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel
confirming to IS: 8491 (l)- 77, backwash by air wash (if specified) and hard wash by
water, standard appurtenances (to be specified), rate of flow controller, filter gauge,
sand expansion guage, etc.
15 Wash Water Tank

Wash Water tanks of capacity equal to 2% of designed quantity of filtered water in a
day (+) 10% with 8 to 10 Mtr. Head (as specified)
15 Wash Water Pumps

Wash Water Pumps with 100% Standby
15 Air Blowers
16 Valves/Gates
Inlet, outlet, wash water inlet- outlet and all types and sizes of valves/gates as per
design of specified make/brand.
16 All types gauges and meters required for filter operations and backwashing etc.
16 The filtration system could also be well tested cloth media disk
No. 2016-17
1 2 3 4
D DISINFECTION
16 Chlorine Contact Tank

Designing, providing and constructing chlorine contact tank of adequate capacity to
deal with average flow. The CCT shall have baffle walls for enhancing mixing of
chlorine. One unit of two compartments, contact time 30 minutes of average flow to
achieve 99.99% reduction in coliform. Chlorine dosage shall be minimum 5 ppm
provision including designing, providing & constructing water supply system for
chlorination, chemicals preparation, domestic use, gardening etc. complete.
17 Chlorinator & Chlorinator Room / Tonner Room

Designing, providing and constructing vacuum type chlorinators having adequate
capacity for dosage of adequate chlorine to ensure 99.99% coliform reduction as per
obligatory provisions detailed specifications with necessary provision of having
chlorinator room of adequate size. The chlorinator (min. 1W+1SB) equipment shall
include chlorine cylinders, tonners, piping, valves, measuring controlling equipments,
safety devices, lifting equipment, chlorine booster pumps (min. 1W+1SB) etc.
complete as per IS-10553 (Part-ll). The tonner room should have min. 3 MT capacity
crane for loading & unloading facility, neutralization pit. Tonner storage should be
distinctly isolated and should have min. storage space for 15 days as per the detailed
specifications & as per gas law & factory act shall be provided. Chlorination room of
minimum 25 m2 area shall be provided. All other matching amenities shall be
provided, 5 MT gantry rail shall be provided for full length of tonner room a 6 m Ht
from level of tonner room with outlet.
18 Sludge treatment
18 Gravity Sludge Thickener

Solids loading rate of 25-35 kg/m2/day. Designing, providing & constructing
watertight of sludge thickener-gravity type (picket fence) in RCC (M-30) with inlet &
outlet pipes, central feed well, sludge it & sludge removal arrangement, grouting
wherever necessary with walkway all around of 1.20m with Gl pipe railing
interconnecting Cl pipes all complete as per specifications, having bottom slope 1:6 &
min. 4.5m SWD with necessary fixed bridge scraper arrangement as per detailed
specifications & necessary inlet & outlet arrangement. All other arrangement as per
detailed specifications. (One unit upto 10 MLD and two units for more than 10 MLD).
Min sludge concentration in thickened sludge shall be 5%.
18 Sludge Holding Sump

Minimum HRT of 4 hours, Designing, providing and constructing of sludge holding
sump and pump for discharging sludge to centrifuge using CI pipe complete as per
detailed specification. Agitators/Mixers shall be provided in sump for keeping sludge
in suspension. The pump shall be of Helical Screw pumps, 100% standby.
18 Sludge Dewatering Equipment Room with Centrifuge or belt press or screw press or
Fliter Press or Combi-machine or Bag Type:
Designing, providing constructing and installing including foundation etc. Sentrifuge
or belt press or screw press or Filter Press or Combi-machine or bag type to handle
the sludge flow as per specifications, with appropriate inlet and outlet provision,
sludge dewatering unit drain etc. Complete as per specifications.
18 Sludge/ filtrate Pumps
a) Capacity to pump sludge in 1 hour with 100% standby (20-25% efficiency, "C"
value fo be adopted 50% than that of water to calculate friction loss)
b) Filtrate from thickening and dewatering to be conveyed only by PVC10 kg/sq.cm.
19 Valves/gates
No. 2016-17
1 2 3 4
Inlet, outlet, wash water Inlet - only Cl D/F and minimum size of 200 mm as per
approved make/brand.
20 All types gauges and meters required for O & M as per design of specified
make/brand.
21 Dawatering during entire work using any technique.
22 Necessary Instrumentation and control as per specifications
23 Outfall Sewer
It shall be designed for peak flows. Designing, providing, constructing appropriate
sized outfall sewer of RCC (NP2 class) pipe to discharge treated effluent to the local
water body/nallah at the point shown on the drawing including necessary chambers
for inspection & cleaning including excavation, dewatering, refilling including
appropriate bedding.
24 Piping work Including Valves and Gates

Providing, laying and Jointing plant pipes as per specifications, including
Interconnection bypass arrangement etc. of treatment units including adequate
numbers of manhole chambers. The item includes excavations, refilling & hydraulic
testing of pipes, valves, gates, accessories & cost of jointing materials. The item
includes required channels with gates or interconnection of units, etc. for all units as
directed etc. complete as per detailed specifications. Sludge pipes shall be sized for
maintaining minimum velocity for prevention of solids.
25 Administrative Building cum Laboratory (G+1):

Designing, providing and constructing administrative building, office cum Laboratory
including stores. This shall be a building having appropriate carpet area and ground
floor and at first floor complete as per specifications including necessary excavation,
foundation in RCC M 20 framed structure B. B masonry (11- class in C.M. 1:6) 20
mm cement plaster in C.M 1:3 inside and outside painting. Aluminium door and
window with glass panels, mosaic tile flooring and skirting and all other allied items,
fixtures fastening electrification arrangement water supply arrangement etc complete.
a) Ground floor to accommodate administrative office & laboratory
b) First floor to accommodate Office of the Plant In Charge, air monitoring equipments
to measure wind direction & speed, hydrogen sulphide
25 Laboratory equipments
25 Furniture and Office Equipments, Office furniture (Make: Godrej/ or similar approved
quality) as per specifications
25 Ventilation and Safety equipments as per specifications
25 Sanitary blocks
26 Maintenance Workshop of size as per specification
27 Air blower Building with Air Blowers: Capable of delivering adequate free air for
aeration device with suitable pressure (100% standby).
28 MCC Room of minimum 9 m x 6 m dear inside with safety measures, approval of

various statutory/ central/ foreign authority as applicable
29 Electric Installation: Both internal and external including entire plant area as per
technical specifications. DG set shall be provided for min. 50% of electrical load on
average flow condition. DG room shall be provided. Instrumentation shall be provided
in the plant which includes level sensors, DO sensor, residual chlorine analyzer,
pressure gauges, flow meters, level switches, pressure indicating and temperature
transmitters, alarms, etc. Maintenance workshop of size 5m x 4m x 3.5m shall be
provided.
No. 2016-17
1 2 3 4
30 General Infrastructure Development: Scope also indudes, Designing, providing and
constructing general infrastructure development such as internal reads of minimum
6 mtr wide, compound wall for STP site, internal street and building lightings,
pathways of minimum 1 m wide to access all STP units and Entrance Gate in MS
fabrication, etc. all complete as per specifications and directed by engineering In
charge.
31 Internal roads Asphalt road (Minimum 4.5 m) to connect all units from main gate of
plot.
32 Compound Wall as per the plant layout, long the boundary of STP site (considering
plant layout for intermediate and ultimate build out capacity and 33% landscaping
area).
33 Green Belt (33% landscaping area) as per specification

Sl No Capacity of Plant (MLD) (MBBR Technology) Rate per MLD
(Rs. In Lakhs)
1 2 MLD treatment plant 188.81

NOTES:
1.Fine screens (SS 316) are of mechanically cleaned type for working unit and
manual bar screen type (SS 316) for standby unit
2.For chemical precipitation, Flash mixing Tank and Flocculation Chamber are
optional. The design values of the coagulation systems are to be considered from
CPHEEO Manual on Water Supply & Treatment
3.Upto 5 MLD Capacity STP chlorination may be done by using sodium hypochlorite
solution. Above 5 MLD capacity gas chlortnatorto be provided.
4.Gravity sludge thickener is not provided upto 3 MLD capacity STP. Sludge will be
collected into sludge sump & pumped directly to sludge dewatering system.
5. Filter press or Bag Type dewatering can be provided for STPs upto 5MLD capacity.
6.Chlorinator room not provided for STP upto 3 MLD.
7.Boundary wall, gate, internal plant roads, storm water drains, site clearance,
landscaping is considered in scope. Plant road shell be 4.5m wide.
8.All water retaining structures are in M-30 grade of concrete.

9.Lead for excavation is considered as 500m.
10.Grade of steel used is Fe 415.
11.Peak factor considered for design for plants 2 to 5 MLD is 2.5, 6 to 20 MLD is 2.25.
12.The rates mentioned above STP are considering sites falling in Seismic Zone II. For
sites falling in seismic zone III shall be increased by 5%.
13.Structural design criteria approved by technical committee shall be applicable for
design.
14.Hydraulic design of the plant shall be considered with free fall discharge of treated
sewage to local water body (above HFL). Hydraulic loss shall be worked out for peak
flow condition and shall not exceed 4.5 m in any circumstances unless otherwise site
specific condition and approved by technical committee.
15.The cost of sewage pumping station and rising main is not included.
16.Makes of equipment shall be approved by PHMED.
17.The rates includes excavation, refilling and throwing away extra stuff as directed
by the Engineer in Charge.
18.All other details shall be as per design criteria and detail specifications.
No. 2016-17
1 2 3 4
2 Sequential Batch Reactor Technology (SBR Technology)
A Designing, Providing, Constructing, Hydraulic Testing Commissioning and giving
satifactorily trails of STP Consisting of inlet chamber, Screen Chamber, Detritus
Tanks , Distribution chmaber and SBR Basines, Sludge Sump, Chlorine contact tank,
chlorinator room/shed, Sludge dewatering equipment, necessary piping work with
required valves, gates ,drains, pathways, Administration Block cum Laboratory,
Laboratory equipments, internal Roads, Pathways, compound wall, tools and plants of
complete as turnkey job with all involved civil, electrical, instrucmentation and
mechanical works inclusive of following items, units as per detailed specification for
civil, electrical and mechanical components with all duties and taxes etc. complete to
achieve BOD < 10ppm, TSS < 10ppm, Bilogical TN < 10ppm & PO4 < 2ppm to get
recyclable quality of water for industrial /agricultural purposes. The Coagulant
Dosing system shall be provided as an optional / backup. All units shall be
interconnected with administration building by suitable or RCC overhead walkways.
UNITS INCLUDED
A Primary Treatment
1 Inlet Chamber:
Designing, Providing, and constructing RCC (M.30) inlet chamber for the peak flow as
per CPHEEO Manual including necessary excavation in all types of strata including
walkway all around the periphery. Inlet chamber having minimum HRT of 60
seconds, each compartment will have steel gates with extension rod, head stock
operting wheels, GI pipe railing etc., the work includes providing and making
necessary arrangements to connect the flow to screen chamber by approach channel
as directed and as per specifications.
2 Screen Chamber:
Desigining, Providing Constructing, Testing and commissioning of Two approach
channels (min 4.5 Long), mechanically cleaned bar rack screen (6 mm clear opening
10 mm the flats) Escalator screens with 100 standby manual fine screen (10 mm
clear opening) MOC: SS316, CI sluice gates (one before screen & one after screen),
designed as per CPHEEO manul in RCC (M-30) including inlet pipe/channel from
inlet chamber outlet pipe/channel to detritus tank, free board of 0.5 m minmum,
RCC walkway 1.2 m wide with GI pipe railing, RCC stair case of 1.2 m width from GL
to screen chamber with operating platform and belt conveyor system incl. panel &
push bottom switch at local level as well as MCC room for two way control.
3 Grit Chamber:
Designing, providing and constructing grit Chamber- Detritus or vortex type or
aerated type (100% slandby), mechanically operated in RCC ( M 30) capable of
removing 100% of 0.2 mm size particle and above, having specific gravity 2.40, HRT
of 1 minute at average flow (Detritus Tank), horizontal velocity not exceeding 0.30
m/sac (Detritus Tank) at peak flow with suitable arrangement of separation of grit
from putrescible solids. Inlet and outlet channels of required sizes as may be required
to connect the flow to connecting unit etc. Complete including hydraulic testing for
water tightness of structure having minimum FB of 0.3 m, wash out arrangement to
Grit chamber and platform 1.2 m wide RCC walkway with GI pipe handling shall be
provided. A pit for collecting grit conveyed by conveyor shall be provided. It should be
suitable to handle the grit for carting. All arrangements shall be as detailed
specifications and as directed.
4 ParshaII flume having head loss limited to 0.15 m with necessary flow measuring
devices/meter consisting of digital indicator In LPS & MLD
No. 2016-17
1 2 3 4
B SECONDARY TREATMENT
5 SBR Basins:
Designing, providing and constructing in RCC (M 30), CASP basins for biological
removal of BOD along with built-in nitrification-de-nitrification, Bio- P removal In
compartments to handle combine flow of 1 DWF Incoming flow and recirculation flow
Including construction of selector compartments and providing 1.2 m wide clear
approach walkways, expansion joints wherever necessary, including foundations etc
as per specifications. Peak factor shall be 2, F/M ratio shall be 0.15, complete with
air blowers, fine diffused aeration grid with Retrievable type installation equipment
and FB 0.5 m and SWD as required. DO level in basin to be minimum 2 mg/l
complete with "Oxygen Uptake Rate" control system and all related instruments,
Stainless steel decanters and automation works. MLSS concentrations shall be 3000 -
5000 mg/l or more, MLVSS to MLSS ratio to be 0.6-0.7. HRT shall be min. 13.5 hrs
and SRT suitable for fully digested sludge. SBR process shall have independent steps
like Fill & aeration, Settling (Sedimentation/ clarification), Decanting without
overlapping each other. Since it is complete batch process, filling will not be
acceptable during settling or Decanting. Minimum decanting depth shall not be less
than 2.20 m. The system should work on a gravity influent condition. No
Influent/effluent equalization tanks or flash filling is accepted. It should have all
other related works.
SRT shall be suitably provided to achieve N, P removal. Since these are the
technology driven plants, bidders has to adopt well established, well tested and
proven, IIT/ NEERI evaluated/approved SBR process /specifications and at least 50
% of the tendered capacity has been in successfully operating condition as per the
outlet criteria mentioned in above in Government organizations of India since last two
years Including one year of standard defect liability period. Bidder has to tie-up with
the well qualified technology provider who having experience in India at least 50 % of
the tendered capacity with 1 year O & M experience in government organizations of
India.
6 Process Air Blowors or Aspirator Aerator:

The Plant should be based on Dissolved Oxygen/Oxygen Uptake Rate Control with
VFD driven Aeration Device.The Aeration System shall be designed for 110 %
Capacity of the design Air requirement. The aeration Blower/Aeration Device shall be
having 100% Installed standby unit.
Air diffuser shall be of disk/ tubular type,retrievable. The wetted part of the aeration
system of non-corrosive materials such as UPVC.
Blowers shall be housed in process air blower building. The minimum area of the
building is 20 sq.m. and height of 5m (min).
7 Raw sludge pump house:

Raw Sludge Sump minimum HRT of 30 minutes & depth of sludge limited to 2 m, 4.5
m minimum diameter, separate panel room outside the wet well.
C DISINFECTION
8 Chlorine Contact Tank:
Designing providing and constructing chlorine contact chamber of adequate capacity
to deal with 1 DWF average flow. The chlorine contact tank should be of 30 min
capacity, during average flow to achieve 99.99 % coliform reduction. Chlorine dose
shall be maintained as per standard provisions, including designing, providing and
constructing water supply, provision for chlorination, including providing dewatering
and by pass arrangement jointing to final effluent mains and outlet weir etc complete.
The effluent quality should match with the standards laid down by TSPCB and as per
obligatory provision and as detailed specification and as directed by Engineer In -
Charge.
No. 2016-17
1 2 3 4
9 Chlorinator and Chlorinator Room/Tonner Room:
Designing, providing and constructing chlorinators vacuum type 2 Nos, (1 working +
1 stand by) with auto switchover facility and having capacity for dosage of adequate
chlorine to ensure 99.99 % coliform reduction as per obligatory provisions and
detailed specifications with necessary provision of having chlorinator room of
adequate size. The chlorinator equipment shall include cost of chlorine
cylinders/tonner, piping, valves, measuring and controlling equipment, safety devices
, lifting equipment, etc. complete as per IS -10553 ( part II) 1982. The tonner room
should have minimum 3 MT capacity Hoist for loading and unloading facility. Tonner
storage should be distinctly isolated and should be for minimum storage space as
directed in the design specification and as per gas laws 1981 and factory act shall be
provided. All other matching amenities shall be provided, Minimum 5 MT gantry rail
shall be provided for full length of tonner room at 6 m height from level of tonner
room, with outlet chamber and treated effluent outlet channel etc complete as per
detailed specification.
10 Sludge treatment
10 Sludge Thickner with equipments:

Solids loading rate of 25-35 kg/m2/day, Designing, providing & constructing
watertight of sludge thickener-gravity type (picket fence) in RCC (M-30) with inlet &
outlet pipes, central feed well, sludge it & sludge removal arrangement, grouting
wherever necessary with walkway all around of 1.20m with GI pipe railing
interconnecting CI pipes all complete as per specifications, having bottom slope 1:6 &
min. 4.5m SWD with necessary fixed bridge scraper arrangement as per detailed
specifications & necessary inlet & outlet arrangement. All other arrangement as per
detailed specifications. (One unit upto 10 MLD and two units for more than 10 MLD).
Min sludge concentration in thickened sludge shall be 4%.
10 Sludge Holding Sump:

Designing, providing and constructing of sludge sump and pump house of
appropriate size with pumps, ceiling height minimum 6 m over sump for discharging
sludge to centrifuge using CI pipe complete as per detailed specification.
10 Sludge Dewatering Equipment Room with Centrifuge or belt press or screw press
or Filter Press or Combi-machine or Bag Type:
Designing, providing constructing and Installing Including foundation etc. Sentrifuge
or belt press or screw press or Filter Press or Combi-machine or bag Type to handle
the sludge flow as per specifications, with appropriate inlet and outlet provision,
sludge dewatering unit drain etc. Complete as per specifications.
10 Sludge/ filtrate Pumps

a) Capacity to pump sludge In 1 hour with 100% standby (20-25% efficiency, C"
value to be adopted 50% than that of water to calculate friction loss)
b) Filtrate from thickening and dewatering to be conveyed only by PVC10

kg/sq.cm.
11 Valves/gates
Inlet, outlet wash water inlet - only CI D/F and minimum size of 200 mm as per
approved make/brand.
12 All types gauges and meters required for O & M as per design of specified
make/brand.
13 Necessary Instrumentation and control as per specifications

No. 2016-17
1 2 3 4
14 Outfall Sewer:
Designing, providing and constructing appropriate outfall sewer of RCC NP2 pipe, to
discharge treated effluent from outlet chember after chlorination tank to the disposal
point at outlet battery limit of STP including necessary chambers for inspection and
cleaning including necessary excavation, dewatering, refilling, concrete
encasing/bedding concrete steps to reach the disposal/ nallah bed level, pitching and
energy dissipation chamber in nallah portion etc. complete up to 50 m length RCC
NP2 pipe line and Including all above items.
15 By pass arrangement
RCC pipes with manholes and C.I. sluice gates (MH to be raised above TWL of
adjecent unit)
16 Piping work In CI-LA Class Including Sluice valves, Reflux Valves, MS Gates:
Providing laying and Jointing pipes other than those already Included in the above
items for interconnection by - pass drains etc. of all units including adequate
numbers of manhole chambers. The item includes excavations, refilling and hydraulic
testing of pipes, valves, gates, accessories and cost of jointing materials. The Items
Includes required channels with gates for Interconnection of units by pass drains etc
for all units as directed etc complete as per detailed specifications.
17 Administrative Building cum Laboratory (G+1):

Designing, providing and constructing administrative building, office cum Laboratory
including stores. This shall be a building having appropriate carpet area and ground
floor and at first floor complete as per specifications including necessary excavation,
foundation in RCC M 20 framed structure B. B masonry (11- class in C.M. 1:6) 20
mm cement plaster in C.M 1:3 inside and outside painting. Aluminium door and
window with glass panels, mosaic tile flooring and skirting and all other allied items,
fixtures fastening electrification arrangement water supply arrangement etc.,
complete.
a) Ground floor to accommodate administrative office & laboratory
b) First floor to accommodate Office of the Plant In Charge, air monitoring equipments
to measure wind direction & speed, hydrogen sulphide concentration etc.
17 Laboratory equipments
Laboratory equipment (as per specifications), beautification, telephone and Intercom
arrangement and wireless system.
17 Furniture and Office Equipments, Office furniture (Make: Godrej/ or similar approved
quality) as per specifications
17 Ventilation and Safety equipmentses per specifications
17 Sanitary blocks
Carpet area -15 square meter minimum up to 25 MLD and 25 square meter above 25
MLD (or as specified).
18 Maintenance Workshop of size as per specification
19 Air blower Building with Air Blowers:

Capable of delivering adequate free air for aeration device with suitable pressure
(100% standby).
20 MCC Room of minimum 9 m x 6 m clear inside with safety measures, approvals of
various statutory/ central/ foreign authority as applicable
21 Electric Installation
21 Both Internal and external including entire plant area (as specified).
21 Electric Installation - Sub Station Room as per specifications.
22 DG room with DG sets, as per electric load and specifications (50 % energy
requirement).
No. 2016-17
1 2 3 4
23 General Infraatructure Development:
Scope also Includes, Designing, providing and constructing general Infrastructure
development such as internal roads of minimum 6 mtr wide, compound wall for STP
site, Internal street and building lightings, pathways of minimum 1 m wide to access
all STP units and Entrance Gate in MS fabrication, etc. all complete as per
specifications and directed by engineering In charge.
23 Internal roads
Asphalt road (Minimum 4.5 m) to connect all units from main gate of plot.
23 Compound Wall at per the plant layouts, along the boundary of STP site (considering
plant layout for Intermediate and ultimate build out capacity and 33% landscaping
area).
23 Green Belt (33% landscaping area) as per specification
NOTES:
1. Fins screens (SS 316) are of mechanically cleaned type for working unit and
manual bar screen type (SS 316) for standby unit.
2. Upto 5 MLD Capacity STP chlorination may be done by using sodium hypochlorite
solution. Above 5 MLD capacity gas chlorinator to be provided.
3. Gravity sludge thickener is not provided upto 3 MLD capacity STP. Sludge will be
collected into sludge sump & pumped directly to sludge dewatering system.
4. Filter press or Bag Type dewatering can be provided for STP's upto 5MLD capacity.
5. Chlorinator room not provided for STP upto 3 MLD.
6. Boundary wall, gate, internal plant roads, storm water drains, site clearance,
landscaping is considered in scope. Plant road shall be 4.5m wide,
7. All water retaining structures are in M-30 grade of concrete.
8. Lead for excavation is considered as 500m.
9. Grade of steel used is Fe 415.
10. Peak factor considered for design for plants 2 to 5 MLD is 2.5, 6 to 20 MLD is
2.25.
11. The rates mentioned above STP are considering sites falling in Seismic Zone II.
For sites falling in seismic zone III shall be increased by 5% only.
12. Structural design criteria approved by technical committee shall be applicable for
design.
13. Hydraulic design of the plant shall be considered with free fall discharge of
treated sewage to local water body (above HFL). Hydraulic loss shall be worked out for
peak flow condition and shall not exceed 4.5m in any circumstances unless otherwise
site specific condition and approved by technical committee.
14. The cost of sewage pumping station and rising main Is not Included
15. Makes of equipment shall be approved by PH&ME Dept.
16. The rates indudes excavation, refilling and throwing away extra stuff as directed
by the Engineer in Charge.
17. All other details shall be as per design criteria and detail spedfications.
No Capacity of Plant in MLD (SBR Technology) Min.No of Basins Rate per MLD
(Rs. In Lakhs)
1 10MLD treatment plant 2 105.00

No. 2016-17
1 2 3 4
Water Meters
Sl.
Description
No.
A Mechanical Flow meter (Domestic meters)
1 Supply of magnetically coupled, multijet, inferential type, dry dial class-B water
meters (Screwed end) manufactured in accordance with ISO 4064 standards and its
latest ammendments/IS 779/1994 and its latest ammendments and shall have Unit (Rate in Rs.)
ISI/EEC/MID pattern approval (valid life cylce certificate and IP 68 protection from
FCRI, GOI). (Including all Taxes)
15 mm Dia Each 1000
20 mm Dia Each 1500
2 Installation & fixing cost of water meter 150
Each
B Electromagnetic flow meter (Bulk flow meters)
Supply, delivery of Electromagnetic flow meter of various sizes as per ISO 9001:2008
manufacturer; Flow meter tube: SS304; Flange:CS DIN PN 10;Liner: Hard rubber
suitable for drinking water approval;Measuring Electordes : SS316; Grounding Ring
:SS316; Coil Housing: SS304; Junction Box : SS304; Ingress Protction :IP68; Flow
transmitter :Microprocessor based; Accuracy :0.5% of measured value for velocities
for 0.5 m/sec flow rate and above; Cable between Flow head & Transmitter : 25 Mts;
1
Display: backlit LCD with 8 digit totaliser; Surge Arrestor : To be provided; Power
Supply : 230 V AC; SCADA/Web Based Data Aquisition System : Electromagnetic
flowmeter should be SCADA/Web Based Compatible; Meter Flow test lab certification
from : NABL/FCRI, Flow test lab should have three times better accuracy than the
uncertainity/Accuracy of the electromagnetic flowmeters; etc., excluding taxes and
duties with 2 years warranty. (Make:Krohne Marshall/ Emerson/Siemens/
Yokowaga/ Endress Hausar)
Unit (Rate in Rs.)
100 mm dia Each 102870
1000 mm dia Each 749938
1100 mm dia Each 1242000
1200 mm dia Each 1354500
1. S o R FOR R.C.C. PLAIN ENDED PIPES
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to
1 B.I.S 458/2003 , Ex-factory, Excluding transportation, taxes & duties
Size Unit SoR For 2016-17

NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia Metre 140
100 mm dia Metre 163
300 mm dia Metre 388 876 893
350 mm dia Metre 485 1104 1123
400 mm dia Metre 558 1220 1245
450 mm dia Metre 683 1395 1409
500 mm dia Metre 748 1513 1726
600 mm dia Metre 1114 2265 2657
700 mm dia Metre 1424 2799 3531
800 mm dia Metre 1740 3689 4599
900 mm dia Metre 2178 4616 5720
1000 mm dia Metre 2641 5749 7806
1100 mm dia Metre 3157 6751 9023
1200 mm dia Metre 3758 7937 10536
1400 mm dia Metre 5105 10248 14526
1600 mm dia Metre 5914 13232 17382
1800 mm dia Metre 7752 17466 23218
Note : All the prices are ex-works. Excise duty, CST/VAT extra as applicable at the
time of supply.
The above rates of RCC Plain ended pipes are based on the following raw materials cost.
Cement. Rs.5,500/- per MT (including all taxes and freight).
Steel (M.S. Rods) - Rs.36,000/- per MT. (including all taxes and freight).
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall
be as per the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of M.S.
Rods = (S2-S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement
= (C2-C1)/1000 X Wc.
S1 = Rs. 36,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the
time of preparation of estimate.
C1 = Rs.5,500/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time
of preparation of estimate.
Ws=Weight of MS Rods required (Kg.) per metre of pipe as per IS:458/2003.
Wc= Weight of Cement required (Kg.) per metre of pipe.
2. S o R FOR R.C.C. COLLARS
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S.
1 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes
including transportation but excluding taxes & duties
80 mm dia Each 43
100 mm dia Each 44
150 mm dia Each 47
200 mm dia Each 63
225 mm dia Each 65
250 mm dia Each 73
300 mm dia Each 96 138 138
350 mm dia Each 118 170 170
400 mm dia Each 132 195 195
450 mm dia Each 206 260 260
500 mm dia Each 235 309 309
600 mm dia Each 319 403 403
700 mm dia Each 411 540 540
800 mm dia Each 577 688 688
900 mm dia Each 691 803 803
1000 mm dia Each 809 1002 1002
1100 mm dia Each 988 1266 1266
1200 mm dia Each 1198 1584 1584
1400 mm dia Each 1547 2004 2004
1600 mm dia Each 1972 2566 2566
1800 mm dia Each 2042 3298 3298
Note: Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost.
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as
per the following formula.
R1= Variation (increase / decrease) in cost (Rs. per each ) due to change in the cost of M.S.
Rods = (S2-S1)/1000 X Ws. R2= Variation (increase / decrease ) in cost (Rs. per each )due to
change in the cost of Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 36,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the
time of preparation of estimate.
C1 = Rs. 5,500/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time
of preparation of estimate
Ws=Weight of MS Rods required (Kg.) per each collar.
Wc= Weight of Cement required (Kg.) per each collar.
3. S o R FOR R.C.C. S/S PIPES (Non - Pressure)
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 at ex-factory (rate per meter of
effective length) Excluding transportation, taxes & duties.
80 mm dia Metre 175
300 mm dia Metre 469 1117 1182
350 mm dia Metre 603 1451 1473
400 mm dia Metre 665 1609 1634
450 mm dia Metre 827 1775 1787
500 mm dia Metre 951 2023 2187
600 mm dia Metre 1346 2832 2888
700 mm dia Metre 1744 3593 3724
800 mm dia Metre 2221 4747 4850
900 mm dia Metre 2792 5946 6086
1000 mm dia Metre 3382 6749 7245
1100 mm dia Metre 3996 7930 8341
1200 mm dia Metre 4531 9340 9747
1400 mm dia Metre 6424 12359 13768
1600 mm dia Metre 7940 15971 16487
1800 mm dia Metre 8942 21086 22014
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time
of supply. The above rates of RCC S/S Non-Pressure pipes are based on the following
raw materials cost.
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall
be as per the following formula.
Revised Cost = Cost as per the above table +R1+R2
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of
M.S. Rods =(S2-S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of
Cement =(C2-C1)/1000 X Wc.
S1 = Rs. 36,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at
the time of preparation of estimate.
C1 = Rs.5,500/- , C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the
time of preparation of estimate
Ws=Weight of MS Rods required (Kg.) per metre of pipe as per IS:458/2003.
Wc= Weight of Cement required (Kg.) per metre of pipe.
4. S o R FOR R.C.C. S/S PIPES (Pressure)
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot
1 pipes conforming to B.I.S. 458/2003 Ex-factory (rate per meter of
effective length) Excluding transportation, taxes & duties.

P1 - Class P2 - Class P3 - Class
80 mm dia Metre 228 258 290
100 mm dia Metre 259 306 352
150 mm dia Metre 357 456 560
200 mm dia Metre 417 593 780
225 mm dia Metre 468 673 868
250 mm dia Metre 511 720 910
300 mm dia Metre 691 1041 1289
350 mm dia Metre 862 1444 1864
400 mm dia Metre 1021 1910 2456
450 mm dia Metre 1095 2260 3030
500 mm dia Metre 1448 2461 3447
600 mm dia Metre 1983 3663 4788
700 mm dia Metre 2629 4812 6095
800 mm dia Metre 3292 5734 7393
900 mm dia Metre 3975 6759
1000 mm dia Metre 4983 7779
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of
supply.
The above rates of RCC S/S Pressure pipes are based on the following raw materials
cost.
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials
shall be as per the following formula.
R1= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of
M.S. Rods =(S2-S1)/1000 X Ws.
R2= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of
Cement =(C2-C1)/1000 X Wc.
S1 = Rs. 36,000/-
S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate.
C1 = Rs. 5,500/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at
the time of preparation of estimate
Ws=Weight of MS Rods required (Kg) per metre of pipe as per IS: 458 / 2003.
Wc= Weight of Cement required (Kg) per metre of pipe.
5. S o R FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES
Sl. No. Description
1 2
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C.
Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each
1 rubber ring) including transportation but excluding taxes & duties. the
Rubber Rings shall be tested at the factory premises confirming to B.I.S.
5382/1985.
80 mm dia Each 26
100 mm dia Each 32
150 mm dia Each 57
200 mm dia Each 67
225 mm dia Each 74
250 mm dia Each 83
300 mm dia Each 101 130 130
350 mm dia Each 117 155 155
400 mm dia Each 129 176 176
450 mm dia Each 146 200 200
500 mm dia Each 191 229 229
600 mm dia Each 251 333 333
700 mm dia Each 341 398 398
800 mm dia Each 433 483 483
900 mm dia Each 542 653 653
1000 mm dia Each 634 788 788
1100 mm dia Each 762 1009 1009
1200 mm dia Each 1220 1268 1268
1400 mm dia Each 1342 1395 1395
1600 mm dia Each 1671 1703 1703
1800 mm dia Each 2081 2175 2175
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C.
Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each
2 rubber ring) including transportation but excluding taxes & duties. The
Rubber Rings shall be tested at the factory premises confirming to B.I.S.
5382/1985.
Size P1 - Class P2 - Class P3 Class
80 mm dia Each 26 26 26
100 mm dia Each 32 34 34
150 mm dia Each 57 57 57
200 mm dia Each 67 67 67
225 mm dia Each 74 75 77
250 mm dia Each 83 85 87
300 mm dia Each 101 107 111
350 mm dia Each 117 134 146
400 mm dia Each 129 176 180
Size P1 - Class P2 - Class P3 Class
450 mm dia Each 146 202 207
500 mm dia Each 191 229 239
600 mm dia Each 251 283 288
700 mm dia Each 341 374 398
800 mm dia Each 433 479 479
900 mm dia Each 542 604
1000 mm dia Each 634 729
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation
of estimate.
6. S o R FOR CONVEYANCE OF R.C.C. PLAIN ENDED PIPES
Rate upto
5 Kms Rate for Rate for
Rate upto 5 Kms
Lead every every
Lead including
including additional additional 1
Sl.No. Description Loading,
Loading, 1 KM lead KM lead or
unloading and
unloading or part part
stacking
and thereof. thereof.
stacking
1 2 3 4 5 6
Conveyance of R.C.C plain ended pipes on all weathered roads including
1 loading, unloading and stacking (per metre) SoR for 2016-17
NP - 2 Class NP - 3 Class & NP - 4 Class
80 mm dia 3.30 0.14
100 mm dia 4.40 0.14
150 mm dia 6.60 0.29
200 mm dia 8.80 0.29
225 mm dia 9.90 0.44
250 mm dia 11.00 0.44
300 mm dia 15.40 0.58 42.90 1.18
350 mm dia 22.00 1.32 46.20 1.32
400 mm dia 24.20 1.46 55.00 1.76
450 mm dia 31.90 1.76 59.40 2.05
500 mm dia 34.10 2.05 64.90 2.05
600 mm dia 49.50 3.22 97.90 4.54
700 mm dia 62.70 4.54 108.90 5.28
800 mm dia 73.70 4.54 130.90 5.28
900 mm dia 84.70 4.54 171.60 9.96
1000 mm dia 125.40 9.36 206.80 9.96
1100 mm dia 137.50 9.36 224.40 10.84
1200 mm dia 156.20 9.96 250.80 10.84
1400 mm dia 188.10 9.96 341.00 11.28
1600 mm dia 217.80 9.96 409.20 11.28
1800 mm dia 250.80 9.96 545.60 15.82
7. S o R FOR CONVEYANCE OF R.C.C. S/S PIPES
Rate upto 5
Rate upto 5 Kms
Rate for every Kms Lead Rate for every
Lead including
Sl. additional 1 KM including additional 1 KM
Description Loading,
No. lead or part Loading, lead or part
unloading &
thereof. unloading thereof.
stacking
and stacking
1 2 3 4 5 6
Conveyance of R.C.C. Socket and Spigot pipes on all weather roads including loading,
1 unloading and stacking (per metre of effective length) SoR
for 2016-17
Size NP - 2 & P1 Class NP 3 & NP - 4 Class
80 mm dia 4.40 0.13
100 mm dia 4.40 0.26
150 mm dia 7.70 0.26
200 mm dia 9.90 0.53
225 mm dia 11.00 0.53
250 mm dia 12.10 1.20
300 mm dia 19.80 1.33 50.60 1.60
350 mm dia 23.10 1.46 55.00 1.86
400 mm dia 23.10 1.73 68.20 3.47
450 mm dia 33.00 1.86 74.80 3.47
500 mm dia 36.30 2.00 82.50 3.73
600 mm dia 47.30 3.47 111.10 5.32
700 mm dia 58.30 3.73 149.60 10.52
800 mm dia 80.30 5.72 177.10 10.52
900 mm dia 119.90 10.25 204.60 10.52
1000 mm dia 136.40 10.25 215.60 10.52
1100 mm dia 154.00 10.52 231.00 10.52
1200 mm dia 171.60 10.52 258.50 10.78
1400 mm dia 213.40 10.52 346.50 10.78
1600 mm dia 253.00 10.78 409.20 11.58
1800 mm dia 313.50 10.78 545.60 15.84
P2 - Class P3 Class
80 mm dia 4.40 0.13 4.40 0.13
100 mm dia 4.40 0.26 4.40 0.26
150 mm dia 7.70 0.26 7.70 0.26
200 mm dia 9.90 0.53 13.20 1.20
225 mm dia 13.20 1.20 15.40 1.33
250 mm dia 14.30 1.33 18.70 1.46
300 mm dia 27.50 1.60 31.90 1.73
350 mm dia 34.10 1.86 44.00 2.00
400 mm dia 40.70 2.00 58.30 3.47
450 mm dia 51.70 3.33 72.60 3.47
500 mm dia 58.30 3.47 88.00 5.19
600 mm dia 77.00 3.47 127.60 6.66
700 mm dia 115.50 7.05 185.90 10.52
800 mm dia 152.90 9.99 237.60 10.52
900 mm dia 185.90 10.52
1000 mm dia 228.80 10.78
8. S o R FOR A.C. PIPES
The PH & ME department banned the usage of RCC & AC pipes for water
supply works vide Memo no 146/T2/SoR/2014-15/2014 dated 30.06.2014. However ENC
(RWS) requested in the SoR meeting on 06.05.2015 to incorporate A.C pipes rates in
SoR for carrying out O&M works, accordingly the following rates are adopted.
Sl.No Description
Manufacture, Supply of A.C*. Pressure pipes (mazza process) as per BIS No:
1592/2003 as amended from time to time duly marked with BIS mark, including cost
of material, incidental handling, loading and packing charges but are exclusive of
1
transportation, unloading, stacking at departmental stores, and excluding excise
duty, VAT octroi and other govt. Levies. The pipes shall be tested at factory premises
confirming to is code 1592/2003.
Class - 15 Class - 20 Class - 25
80 mm dia Rate/Metre 195 214 267
300 mm dia Rate/Metre 1381 1801 2302
350 mm dia Rate/Metre 1682 2187 2760
400 mm dia Rate/Metre 2186 2862 3552
450 mm dia Rate/Metre 2600 3453 4323
500 mm dia Rate/Metre 3206 4220 5299
600 mm dia Rate/Metre 4560 5959 7592
700 mm dia Rate/Metre 5999 8138 10522
750 mm dia Rate/Metre 6836 9394 12039
800 mm dia Rate/Metre 7822 10643 13659
850 mm dia Rate/Metre 8775 11972 15380
900 mm dia Rate/Metre 9782 13376 17204
1000 mm dia Rate/Metre 12075 16421 21156
2 Lowering, laying and jointing of AC pressure pipes with ac couplings or CID joints
complete with Rubber rings in readymade trenches true to alignment and gradient
including filling with water lead upto 500 mts and testing to required pressure
including all sundries but excluding cost of jointing materials and conveyance from
source of supply as per BIS No. 6530/1972
1. The above rates of AC Pipes are based on the Cement cost of RS 5,500/- per MT
(Including all taxes and freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 77,000/- per M.T
(Excluding all taxes & Frieght)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kgs/Rmt
IC = Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be
increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kgs/Rmt
IF = Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of Mazza process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
3)The duties and taxes as applicable shall be added as per rules at the time of preparation
of estimate
Transportation of AC pressure pipes at site of work anywhere in 5% on the basic
Telangana State on motor able roads for full truck loads including transit cost of
2 insurance, unloading, and stacking at site of work etc. Complete (AC corresponding
Couplings and Rubber rings are to be supplied free of transportation AC Pressure
charges). pipes.
*Under any Circumstances the A.C. pipes shall not be procured for laying new water lines,
except O&M works.
9. S o R FOR A.C. COUPLINGS
Sl.No Description
1 2
Manufacture, Supply of A.C* Couplings suitable to A.C*.Pressure pipes (mazza
process) as per BIS: 1592/2003 excluding cost of rubber rings to suit AC*
1 pressure pipes including cost of material, incidental handling, packing,
transportation and unloading at site transit risk, but excluding excise duty, VAT
and other govt. Levies and testing of joints as per IS Code.
0
Class - 15 Class - 20 Class 25
80 mm dia Rate/Each 91 98 113
350 mm dia Rate/Each 628 811 1035
400 mm dia Rate/Each 968 1263 1615
450 mm dia Rate/Each 1159 1528 1959
500 mm dia Rate/Each 1381 1846 2356
600 mm dia Rate/Each 1705 2143 2742
700 mm dia Rate/Each 2241 3017 3923
750 mm dia Rate/Each 2528 3456 4460
800 mm dia Rate/Each 2868 3888 5032
850 mm dia Rate/Each 3195 4349 5640
900 mm dia Rate/Each 3535 4835 6278
1000 mm dia Rate/Each 4315 5879 7662
1. The above rates of AC Coupling are based on the Cement cost of RS.5,500/- per MT
(Including all taxes and freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 77,000/- per M.T
(Excluding all taxes & Frieght)
For any Increase/ Decrease in the rate of cement, the price of AC Coupling per Each shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of Coupling in Kgs/Each, IC = Increase/Decrease in cost
of cement/kg.For any increase/decrease in the rate of fiber, the price of AC Coupling per
Each shall be increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of Coupling in Kgs/Each,IF = Increase /Decrease in
cost of fiber/kg.The Fiber rates are to be obtained from A.C. Pipe manufacturer of Mazza
process.The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
of estimate.
10. S o R FOR RUBBER RINGS TO SUIT A.C. COUPLINGS
Sl.
Description
No.
1 2
Schedule of rate for supply of Rubber rings manufactured as per BIS: 5382/1988 with
BIS Mark embossed per each set suitable for A.C*. Couplings including cost of
1 material, incidental, handling, packing, transportation and unloading at site transit risk
etc., but excluding VAT. The Rubber Rings shall be tested at the factory premises
confirming to B.I.S 5382/1988
Class - 15 Class - 20 Class - 25
80 mm dia Each Set 68 68 68
100 mm dia Each Set 83 83 83
125 mm dia Each Set 108 108 108
150 mm dia Each Set 136 136 136
200 mm dia Each Set 142 142 142
250 mm dia Each Set 164 164 164
300 mm dia Each Set 164 164 164
350 mm dia Each Set 186 186 186
400 mm dia Each Set 228 228 228
450 mm dia Each Set 267 267 267
500 mm dia Each Set 309 309 309
600 mm dia Each Set 350 350 350
700 mm dia Each Set 727 727 727
750 mm dia Each Set 755 755 755
800 mm dia Each Set 811 811 811
850 mm dia Each Set 904 904 904
900 mm dia Each Set 950 950 950
1000 mm dia Each Set 1053 1053 1053
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate
Public Health Items
11. S o R FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR 2016-17
Sl.No. Description
1 2
Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding
1 transportation, taxes & duties., for the following fiel`d test pressures.(the manufacture shall design the pipes as per the IS Code
784-2001)
Size Unit SoR For 2016-17.
Rs. Rs. Rs. Rs. Rs. Rs.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2
350 mm dia Metre 2831 2841 2853 2864 2921 3021
400 mm dia Metre 3044 3066 3098 3135 3191 3237
450 mm dia Metre 3240 3254 3288 3348 3431 3503
500 mm dia Metre 3507 3519 3543 3616 3688 3794
600 mm dia Metre 4028 4053 4090 4211 4342 4470
700 mm dia Metre 4720 4780 4890 5020 5160 5350
800 mm dia Metre 5720 5840 5970 6140 6320 6597
900 mm dia Metre 6560 6720 6890 7170 7390 7910
1000 mm dia Metre 7730 7940 8160 8380 8650 9250
1100 mm dia Metre 8660 8900 9170 9440 9710 10460
1200 mm dia Metre 9730 10050 10350 10560 11110 12050
1300 mm dia Metre 11020 11380 11740 12100 13160 13600
1400 mm dia Metre 12750 13170 13600 14310 15200 15850
1500 mm dia Metre 14390 14890 15360 16640 17220 19230
1600 mm dia Metre 16190 16730 17270 18780 19460 21400
1700 mm dia Metre 17370 18000 18620 20210 22400 23400
1800 mm dia Metre 19203 20399 21458 23220 24070 26660
1900 mm dia Metre 20514 21614 23444 24764 26880 28920
2000 mm dia Metre 22540 23915 25110 27350 30110 31290
Cost of laying jointing, testing to hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and
2
emptying pipe line after completion of field testing etc.
350 mm dia Metre 213 213 213 213 213 213
400 mm dia Metre 230 230 230 230 230 230
Public Health Items
450 mm dia Metre 266 266 266 266 266 266
500 mm dia Metre 283 283 283 283 283 283
600 mm dia Metre 348 348 348 348 348 348
700 mm dia Metre 408 408 408 408 408 408
800 mm dia Metre 462 462 462 462 462 462
900 mm dia Metre 506 506 506 506 506 506
1000 MM IA Metre 584 584 584 584 584 584
1100 MM IA Metre 656 656 656 656 656 656
1200 MMDIA Metre 727 727 727 727 727 727
1300 mm dia Metre 824 824 824 824 824 824
1400 mm dia Metre 932 932 932 932 932 932
1500 mm dia Metre 1011 1011 1011 1011 1011 1011
1600 mm dia Metre 1133 1133 1133 1133 1133 1133
1700 mm dia Metre 1233 1233 1233 1233 1233 1233
1800 mm dia Metre 1305 1305 1305 1305 1305 1305
1900 mm dia Metre 1378 1378 1378 1378 1378 1378
2000 mm dia Metre 1450 1450 1450 1450 1450 1450
Conveyance of pre-stressed (Non-cylinder) concrete pipes and accessories including loading at factory, un-loading at site and
3
stacking for the following sizes.(minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
350 mm dia PerKM/M 1.47 1.47 1.47 1.47 1.47 1.47
400 mm dia PerKM/M 1.47 1.47 1.47 1.47 1.47 1.47
450 mm dia PerKM/M 1.79 1.79 1.79 1.79 1.79 1.79
500 mm dia PerKM/M 1.89 1.89 1.89 1.89 1.89 1.89
600 mm dia PerKM/M 2.10 2.10 2.10 2.10 2.10 2.10
700 mm dia PerKM/M 3.47 3.47 3.47 3.47 3.47 3.47
800 mm dia PerKM/M 3.47 3.47 3.47 3.47 3.47 3.47
900 mm dia PerKM/M 3.47 3.47 3.47 3.47 3.47 3.47
1000 mm dia PerKM/M 5.57 5.57 5.57 5.57 5.57 5.57
1100 mm dia PerKM/M 5.57 5.57 5.57 5.57 5.57 5.57
1200 mm dia PerKM/M 10.61 10.61 10.61 10.61 10.61 10.61
Public Health Items
1300 mm dia PerKM/M 10.71 10.71 10.71 10.71 10.71 10.71

1400 mm dia PerKM/M 10.71 10.71 10.71 10.71 10.71 10.71
1500 mm dia PerKM/M 10.71 10.71 10.71 10.71 10.71 10.71
1600 mm dia PerKM/M 11.97 11.97 11.97 11.97 11.97 11.97
1700 mm dia PerKM/M 11.97 11.97 11.97 11.97 11.97 11.97
1800 mm dia PerKM/M 12.29 12.29 12.29 12.29 12.29 12.29
1900 mm dia PerKM/M 12.81 12.81 12.81 12.81 12.81 12.81
2000 mm dia PerKM/M 12.81 12.81 12.81 12.81 12.81 12.81
Cost of Machine End pair (Socket +Spigot) with 100mm length MS Barrel on each side of Socket and Spigot for providing M.S
4
Specials on PSC pipelines excluding cost of M.S Special including cost and conveyance to site etc., complete.
350 mm dia Per Pair 11012 11012 11012 11012 11012 11012
400 mm dia Per Pair 12632 12632 12632 12632 12632 12632
450 mm dia Per Pair 14250 14250 14250 14250 14250 14250
500 mm dia Per Pair 15870 15870 15870 15870 15870 15870
600 mm dia Per Pair 19045 19045 19045 19045 19045 19045
700 mm dia Per Pair 22283 22283 22283 22283 22283 22283
800 mm dia Per Pair 25522 25522 25522 25522 25522 25522
900 mm dia Per Pair 28760 28760 28760 28760 28760 28760
1000 mm dia Per Pair 31740 31740 31740 31740 31740 31740
1100 mm dia Per Pair 34979 34979 34979 34979 34979 34979
1200 mm dia Per Pair 38218 38218 38218 38218 38218 38218
1300 mm dia Per Pair 41198 41198 41198 41198 41198 41198
1400 mm dia Per Pair 48582 48582 48582 48582 48582 48582
1500 mm dia Per Pair 57003 57003 57003 57003 57003 57003
1600 mm dia Per Pair 63481 63481 63481 63481 63481 63481
1700 mm dia Per Pair 71231 71231 71231 71231 71231 71231
1800 mm dia Per Pair 81407 81407 81407 81407 81407 81407
Public Health Items
1900 mm dia Per Pair 94126 94126 94126 94126 94126 94126
2000 mm dia Per Pair 113206 113206 113206 113206 113206 113206
Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to is:7322-1985 and
5
flange dimensions confirming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site, vat etc., complete.
Diameter and thickness Unit Rate Diameter and thickness Unit Rate
80 mm diax 15 mm thick Each Flange 740
50 500mm diax 20 mm thick Each Flange 7531
100 mm diax 15 mm thick Each Flange 1016 600 mm diax 20 mm thick Each Flange 9479
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.52,500/-MT (Basic+ CED+ST & freight).
and cement price of Rs.5,500/- per MT (including all taxes and freight)
The rates may be revised depending upon the increase/decrease in the cost of HT wire and cement. as per the following method. The cost of HT wire
may be obtained from reputed firms like SAIL/TATA/ SS Ltd. etc.,
Revised Cost =Cost as per the above table +R1+R2.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc.
H1 = Rs. 52,500/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 5,500/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
The rates for MS flanges are considering landed price of MS Plates of Rs.41,000/- per MT. Price variation to be released on actual weight of flange.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
Public Health Items
12. S o R FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES FOR THE YEAR 2016-17
Sl
Description
No.
1 2
Pre-stressed (Cylinder type ) concrete pipes conforming to IS 784/2001 @ ex-factory cost of pipes, excluding transportation, laying, jointing,
1 testing, bends, tees, specials, taxes & duties etc,. For the following field test pressures.(the manufacture shall design the pipes as per the IS
Code 784-2001).
20
4 6 8 10 12 14 16 18 Kg/cm2
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
400 mm dia Meter 5179 5179 5179 5179 5205 5257 5347 5433 5498
450 mm dia Meter 5627 5627 5627 5653 5717 5795 5890 5930 5980
500 mm dia Meter 6000 6000 6060 6110 6160 6230 6310 6370 6430
600 mm dia Meter 6890 6960 7030 7110 7180 7250 7370 7460 7540
700 mm dia Meter 7830 7920 8020 8110 8210 8300 8470 8570 8700
800 mm dia Meter 9220 9330 9450 9580 9700 9820 10000 10170 10310
900 mm dia Meter 10490 10650 10800 10960 11120 11280 11710 11920 12170
1000 mm dia Meter 12600 12790 12980 13180 13370 13570 14140 14420 14700
1100 mm dia Meter 13990 14220 14460 14690 14930 15160 15860 16170 16520
1200 mm dia Meter 15550 15830 16100 16380 16670 16950 17780 18160 18550
1300 mm dia Meter 17400 17730 18060 18390 18720 19360 20030 20520 21050
1400 mm dia Meter 19530 19940 20360 20820 21650 22170 22950 23160 24060
1500 mm dia Meter 22885 23390 23820 24260 25120 25610 26260 27250 27800
1600 mm dia Meter 25809 26495 27070 27990 28550 29170 30280 30900 31520
1700 mm dia Meter 27782 28530 29090 30140 30770 32100 32800 33510 34230
1800 mm dia Meter 30437 31269 32899 33909 34896 36752 38320 39110 39920
1900 mm dia Meter 35270 35980 37220 38000 39580 40460 41340 42230 43120
2000 mm dia 37220 38520 39380 40250 42010 42980 43960 44940 45940
Meter
Public Health Items
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene diapher cloth, cost
2 of transportation of water and emptying pipe line after completion of field testing etc.
400 mm dia Meter 449 449 449 449 449 449 449 449 449
450 mm dia Meter 528 528 528 528 528 528 528 528 528
500 mm dia Meter 575 575 575 575 575 575 575 575 575
600 mm dia Meter 673 673 673 673 673 673 673 673 673
700 mm dia Meter 767 767 767 767 767 767 767 767 767
800 mm dia Meter 880 880 880 880 880 880 880 880 880
900 mm dia Meter 992 992 992 992 992 992 992 992 992
1000 mm dia Meter 1087 1087 1087 1087 1087 1087 1087 1087 1087
1100 mm dia Meter 1232 1232 1232 1232 1232 1232 1232 1232 1232
1200 mm dia Meter 1344 1344 1344 1344 1344 1344 1344 1344 1344
1300 mm dia Meter 1439 1439 1439 1439 1439 1439 1439 1439 1439
1400 mm dia Meter 1584 1584 1584 1584 1584 1584 1584 1584 1584
1500 mm dia Meter 1758 1758 1758 1758 1758 1758 1758 1758 1758
1600 mm dia Meter 1903 1903 1903 1903 1903 1903 1903 1903 1903
1700 mm dia Meter 2143 2143 2143 2143 2143 2143 2143 2143 2143
1800 mm dia Meter 2272 2272 2272 2272 2272 2272 2272 2272 2272
1900 mm dia Meter 2478 2478 2478 2478 2478 2478 2478 2478 2478
2000 mm dia Meter 2638 2638 2638 2638 2638 2638 2638 2638 2638
Conveyance of Pre-stressed (Cylinder type) concrete pipes and accessories including loading at factory, un-loading at site and stacking for
3 the following sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
400 mm dia Per KM/M 1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.26
450 mm dia Per KM/M 1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.26
500 mm dia Per KM/M 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79
600 mm dia Per KM/M 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00
700 mm dia Per KM/M 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15
800 mm dia Per KM/M 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15
900 mm dia Per KM/M 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15
1000 mm dia Per KM/M 5.04 5.04 5.04 5.04 5.04 5.04 5.04 5.04 5.04
1100 mm dia Per KM/M 5.04 5.04 5.04 5.04 5.04 5.04 5.04 5.04 5.04
Public Health Items
1200 mm dia Per KM/M 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98
1300 mm dia Per KM/M 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98
1400 mm dia Per KM/M 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98
1500 mm dia Per KM/M 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98
1600 mm dia Per KM/M 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98
1700 mm dia Per KM/M 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97
1800 mm dia Per KM/M 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97
1900 mm dia Per KM/M 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97 11.97
2000 mm dia Per KM/M 12.71 12.71 12.71 12.71 12.71 12.71 12.71 12.71 12.71
Note: The rates of PCCP pipes which were incorporated in the SSR are based on the following raw materials cost.
HT Wire: - Rs.52,500/- (including all taxes & freight)
HR Coil (Hot Rolled): - Rs.42,500/- (including all taxes & freight)
Cement Cost Rs. 5,500/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of HR Coil =(R2-R1)/1000 X Wr.
R3= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 52,500/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
R1 = Rs. 42,500/- R2 = Cost of HR Coil (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
Wh=Weight of HT Wire required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per meter of pipe.
Wr = Weight of HR Coil required (kg) per metre of pipe.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
Public Health Items
13. S o R FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2016-17
Sl.
Description
No
Bar Wrapped Steel Cylindrical (BWSC) pipes conforming to IS 15155 - 2002, ex-factory excluding transportation, taxes and duties etc., for bar
1
wrapped steel cylindrical pipes for the following field test pressures.
Size Unit Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.
28
4 -12 14 16 18 20 22 24 2 30
26 Kg/cm Kg/c
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm 2
m2
250 mm dia Meter 2510 2510 2510 2510 2510 2510 2790 2869 2888 3040
300 mm dia Meter 2800 2800 2800 2800 2800 2910 3298 3411 3465 3654
350 mm dia Meter 3400 3400 3400 3450 3600 3760 3910 4060 4220 4400
400 mm dia Meter 3740 3740 3810 4010 4200 4400 4590 4790 5031 5220
450 mm dia Meter 4190 4220 4480 4720 4980 5169 5404 5604 5815 6310
500 mm dia Meter 4540 4820 5120 5440 5740 6081 6353 6581 7044 7513
600 mm dia Meter 5590 5940 6380 6800 7250 7730 8260 8800 9300 9790
700 mm dia Meter 6790 7370 7940 8530 9220 9910 10540 11460 12040 12630
800 mm dia Meter 8160 8900 9650 10520 11510 12340 13370 14170 15010 15970
900 mm dia Meter 9810 10730 11660 12690 13800 15050 16110 17110 18360 19750
1000 mm dia Meter 11610 12750 14050 15370 16580 17940 19130 20630 22360 23720
1100 mm dia Meter 15150 15450 16830 18380 19880 21460 23350 24830 26700 28580
1200 mm dia Meter 16520 17570 19240 21000 22780 24810 27100 29320 31350 33270
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene diaher cloth, cost of
2
transportation of water and emptying pipe line after completion of field testing.
250 mm dia Meter 306 306 306 306 306 306 306 306 306 306
300 mm dia Meter 360 360 360 360 360 360 360 360 360 360
350 mm dia Meter 426 426 426 426 426 426 426 426 426 426
400 mm dia Meter 476 476 476 476 476 476 476 476 476 476
450 mm dia Meter 476 476 476 476 476 476 476 476 476 476
500 mm dia Meter 596 596 596 596 596 596 596 596 596 596
600 mm dia Meter 733 733 733 733 733 733 733 733 733 733
700 mm dia Meter 854 854 854 854 854 854 854 854 854 854
800 mm dia Meter 971 971 971 971 971 971 971 971 971 971
Public Health Items
900 mm dia Meter 1142 1142 1142 1142 1142 1142 1142 1142 1142 1142
1000 mm dia Meter 1262 1262 1262 1262 1262 1262 1262 1262 1262 1262
1100 mm dia Meter 1483 1483 1483 1483 1483 1483 1483 1483 1483 1483
1200 mm dia Meter 1660 1660 1660 1660 1660 1660 1660 1660 1660 1660
Conveyance of Bar Wrapped Steel Cylindrical (BWSC) pipes and accessories including loading at factory, un-loading at site and stacking for the
3 following sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
250 mm dia Per KM/M 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66
300 mm dia Per KM/M 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66
350 mm dia Per KM/M 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88
400 mm dia Per KM/M 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10
450 mm dia Per KM/M 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44
500 mm dia Per KM/M 1.76 1.76 1.76 1.76 1.76 1.76 1.76 1.76 1.76 1.76
600 mm dia Per KM/M 1.88 1.88 1.88 1.88 1.88 1.88 1.88 1.88 1.88 1.88
700 mm dia Per KM/M 2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.10
800 mm dia Per KM/M 2.76 2.76 2.76 2.76 2.76 2.76 2.76 2.76 2.76 2.76
900 mm dia Per KM/M 2.98 2.98 2.98 2.98 2.98 2.98 2.98 2.98 2.98 2.98
1000 mm dia Per KM/M 3.42 3.42 3.42 3.42 3.42 3.42 3.42 3.42 3.42 3.42
1100 mm dia Per KM/M 7.64 7.64 7.64 7.64 7.64 7.64 7.64 7.64 7.64 7.64
1200 mm dia Per KM/M 10.67 10.67 10.67 10.67 10.67 10.67 10.67 10.67 10.67 10.67
Note: The above rates of BWSC pipes are based on the following raw materials' cost.
HR Plates - Rs.42,500/- per MT (Basic +CED+ST & freight),Wire rods - Rs.36,000/- per MT (Basic +CED+ST & freight)
Cement Cost Rs. 5,500/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Plate =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of wire rods =(W2-W1)/1000 X Ww.
R3= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 42,500/- H2 = Cost of HR Plate (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
W1 = Rs. 36,000/- W2 = Cost of Wire rods (Rs. Per MT including all taxes and freight) at the time of preparation of estimate .
Wh=Weight of HR Plate required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Ww = Weight of wire rods required (kg) per metre of pipe.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
Public Health Engineering Items
14. S o R FOR M.S. PIPES FOR THE YEAR 2016-17
Thicknes
Sl.No. Description Unit Rate (Rs.)
s in mm
1 2 3 4 5
1 Manufacture, supply and delivery of M.S
Pipes conforming to is 3589/2001 including
in lining with cement mortar (1:2) 15mm
thick using 4 numbers of 6mm dia
M.S.Rings at each end of the pipe and out
coating with cement mortar (1:3) 30mm
thick by shortcreting or gunetting duly
providing wire mesh of size 50x50x3mm
including cost of all materials, labour
charges, transportation to anywhere in T.G,
but excluding taxes & duties, etc.
500 mm dia Metre 8.00 8312
500 mm dia Metre 10.00 9761
600 mm dia Metre 8.00 9883

600 mm dia Metre 10.00 11607
700 mm dia Metre 8.00 11401

700 mm dia Metre 10.00 13423
800 mm dia Metre 8.00 12916

800 mm dia Metre 10.00 15205
800 mm dia Metre 12.00 17503
900 mm dia 8.00 14462

900 mm dia Metre 10.00 16985
900 mm dia Metre 12.00 19541
1000 mm dia Metre 8.00 16044

1000 mm dia Metre 10.00 18866
1000 mm dia Metre 12.00 21688
1000 mm dia Metre 14.00 24478
1100 mm dia Metre 10.00 20593

1100 mm dia Metre 12.00 23682
1100 mm dia Metre 14.00 26771
1100 mm dia Metre 16.00 29913
1200 mm dia Metre 10.00 22472

1200 mm dia Metre 12.00 25828
1200 mm dia Metre 14.00 29142
1200 mm dia Metre 16.00 32505
1200 mm dia Metre 18.00 35860
1300 mm dia Metre 10.00 24246

1300 mm dia Metre 12.00 27822
1300 mm dia Metre 14.00 31443
1300 mm dia Metre 16.00 35118
1300 mm dia Metre 18.00 38742
1300 mm dia Metre 20.00 42372
1400 mm dia Metre 10.00 26037

1400 mm dia Metre 12.00 29924
1400 mm dia Metre 14.00 33812
1400 mm dia Metre 16.00 37742
1400 mm dia Metre 18.00 41639
1400 mm dia Metre 20.00 45581
1400 mm dia Metre 22.00 49469
1500 mm dia Metre 10.00 27851

1500 mm dia Metre 12.00 32007
1500 mm dia Metre 14.00 36117
1500 mm dia Metre 16.00 40272
1500 mm dia Metre 18.00 44480
1500 mm dia Metre 20.00 48635
1500 mm dia Metre 22.00 52893
1500 mm dia Metre 24.00 57048
1600 mm dia Metre 10.00 29696

1600 mm dia Metre 12.00 34064
1600 mm dia Metre 14.00 38527
1600 mm dia Metre 16.00 42949
1600 mm dia Metre 18.00 47378
1600 mm dia Metre 20.00 51800
1600 mm dia Metre 22.00 56275
1600 mm dia Metre 24.00 60791
1600 mm dia Metre 26.00 65275
1700 mm dia Metre 10.00 31418

1700 mm dia Metre 12.00 36147
1700 mm dia Metre 14.00 40835
1700 mm dia Metre 16.00 45479
1700 mm dia Metre 18.00 50262
1700 mm dia Metre 20.00 54950
1700 mm dia Metre 22.00 59638
1700 mm dia Metre 24.00 64428
1700 mm dia Metre 26.00 69170
1700 mm dia Metre 28.00 73910
1800 mm dia Metre 10.00 33295

1800 mm dia Metre 12.00 38258
1800 mm dia Metre 14.00 43200
1800 mm dia Metre 16.00 48155
1800 mm dia Metre 18.00 53110
1800 mm dia Metre 20.00 58114
1800 mm dia Metre 22.00 63122
1800 mm dia Metre 24.00 68077
1800 mm dia Metre 26.00 73125
1800 mm dia Metre 28.00 78141
1900 mm dia Metre 10.00 35075

1900 mm dia Metre 12.00 40284
1900 mm dia Metre 14.00 45506
1900 mm dia Metre 16.00 50715
1900 mm dia Metre 18.00 55944
1900 mm dia Metre 20.00 61219
1900 mm dia Metre 22.00 66481
1900 mm dia Metre 24.00 71709
1900 mm dia Metre 26.00 77025
1900 mm dia Metre 28.00 82300
2000 mm dia Metre 10.00 36839

2000 mm dia Metre 12.00 42327
2000 mm dia Metre 14.00 47811
2000 mm dia Metre 16.00 53299
2000 mm dia Metre 18.00 58828
2000 mm dia Metre 20.00 64316
2000 mm dia Metre 22.00 69851
2000 mm dia Metre 24.00 75393
2000 mm dia Metre 26.00 80922
2000 mm dia Metre 28.00 86464
2000 mm dia Metre 30.00 92054
2100 mm dia Metre 12.00 44425

2100 mm dia Metre 14.00 50179
2100 mm dia Metre 16.00 55922
2100 mm dia Metre 18.00 61685
2100 mm dia Metre 20.00 67479
2100 mm dia Metre 22.00 73275
2100 mm dia Metre 24.00 79082
2100 mm dia Metre 26.00 84886
2100 mm dia Metre 28.00 90694
2100 mm dia Metre 30.00 96542
2100 mm dia Metre 32.00 102391
2100 mm dia Metre 34.00 108260
2200 mm dia Metre 12.00 46467

2200 mm dia Metre 14.00 52475
2200 mm dia Metre 16.00 58504
2200 mm dia Metre 18.00 64565
2200 mm dia Metre 20.00 70627
2200 mm dia Metre 22.00 76648
2200 mm dia Metre 24.00 82718
2200 mm dia Metre 26.00 88834
2200 mm dia Metre 28.00 94855
2200 mm dia Metre 30.00 100970
2200 mm dia Metre 32.00 107093
2200 mm dia Metre 34.00 113262
2200 mm dia Metre 36.00 119336
2300 mm dia Metre 12.00 48528

2300 mm dia Metre 14.00 54804
2300 mm dia Metre 16.00 61128
2300 mm dia Metre 18.00 67456
2300 mm dia Metre 20.00 73752
2300 mm dia Metre 22.00 80080
2300 mm dia Metre 24.00 86409
2300 mm dia Metre 26.00 92791
2300 mm dia Metre 28.00 99086
2300 mm dia Metre 30.00 105468
2300 mm dia Metre 32.00 111850
2300 mm dia Metre 34.00 118285
2300 mm dia Metre 36.00 124676
2400 mm dia Metre 12.00 50554

2400 mm dia Metre 14.00 57094
2400 mm dia Metre 16.00 63649
2400 mm dia Metre 18.00 70303
2400 mm dia Metre 20.00 76845
2400 mm dia Metre 22.00 83440
2400 mm dia Metre 24.00 90097
2400 mm dia Metre 26.00 96692
2400 mm dia Metre 28.00 103300
2400 mm dia Metre 30.00 109895
2400 mm dia Metre 32.00 116551
2400 mm dia Metre 34.00 123253
2400 mm dia Metre 36.00 129900
2500 mm dia Metre 14.00 59476

2500 mm dia Metre 16.00 66284
2500 mm dia Metre 18.00 73146
2500 mm dia Metre 20.00 80008
2500 mm dia Metre 22.00 86927
2500 mm dia Metre 24.00 93789
2500 mm dia Metre 26.00 100651
2500 mm dia Metre 28.00 107566
2500 mm dia Metre 30.00 114394
2500 mm dia Metre 32.00 121309
2500 mm dia Metre 34.00 128276
2500 mm dia Metre 36.00 135191
2600 mm dia Metre 14.00 61822

2600 mm dia Metre 16.00 68897
2600 mm dia Metre 18.00 75980
2600 mm dia Metre 20.00 83108
2600 mm dia Metre 22.00 90237
2600 mm dia Metre 24.00 97415
2600 mm dia Metre 26.00 104551
2600 mm dia Metre 28.00 111733
2600 mm dia Metre 30.00 118861
2600 mm dia Metre 32.00 126041
2600 mm dia Metre 34.00 133231
2600 mm dia Metre 36.00 140465
2600 mm dia Metre 38.00 147647
2600 mm dia Metre 40.00 154882
2600 mm dia Metre 42.00 162125
2700 mm dia Metre 18.00 78885
2700 mm dia Metre 20.00 86226
2700 mm dia Metre 22.00 93621
2700 mm dia Metre 24.00 101024
2700 mm dia Metre 26.00 108459
2700 mm dia Metre 28.00 115959
2700 mm dia Metre 30.00 123405
2700 mm dia Metre 32.00 130808
2700 mm dia Metre 34.00 138257
2700 mm dia Metre 36.00 145759
2700 mm dia Metre 38.00 153215
2700 mm dia Metre 40.00 160716
2700 mm dia Metre 42.00 168164
2800 mm dia Metre 18.00 81711

2800 mm dia Metre 20.00 89380
2800 mm dia Metre 22.00 97041
2800 mm dia Metre 24.00 104704
2800 mm dia Metre 26.00 112365
2800 mm dia Metre 28.00 120074
2800 mm dia Metre 30.00 127839
2800 mm dia Metre 32.00 135500
2800 mm dia Metre 34.00 143215
2800 mm dia Metre 36.00 150937
2800 mm dia Metre 38.00 158705
2800 mm dia Metre 40.00 166420
2800 mm dia Metre 42.00 174229
2900 mm dia Metre 18.00 84662

2900 mm dia Metre 20.00 92537
2900 mm dia Metre 22.00 100465
2900 mm dia Metre 24.00 108401
2900 mm dia Metre 26.00 116327
2900 mm dia Metre 28.00 124296
2900 mm dia Metre 30.00 132277
2900 mm dia Metre 32.00 140213
2900 mm dia Metre 34.00 148244
2900 mm dia Metre 36.00 156267
2900 mm dia Metre 38.00 164301
2900 mm dia Metre 40.00 172290
2900 mm dia Metre 42.00 180325
3000 mm dia Metre 18.00 87451

3000 mm dia Metre 20.00 95687
3000 mm dia Metre 22.00 103836
3000 mm dia Metre 24.00 112029
3000 mm dia Metre 26.00 120224
3000 mm dia Metre 28.00 128459
3000 mm dia Metre 30.00 136714
3000 mm dia Metre 32.00 144908
3000 mm dia Metre 34.00 153197
3000 mm dia Metre 36.00 161496
3000 mm dia Metre 38.00 169751
3000 mm dia Metre 40.00 178052
3000 mm dia Metre 42.00 186341
2 Cost of Laying, Jointing, Hydrostatic Filed Test

Pressure, Including Cost of Site Welding,
Jointing Materials And Cost of Transportation
of Water Including Emptying Pipe Line After
Completion Of Field Testing
500 mm dia Metre 8.00 783
500 mm dia Metre 10.00 802
600 mm dia Metre 8.00 967

600 mm dia Metre 10.00 987
700 mm dia Metre 8.00 1221

700 mm dia Metre 10.00 1246
800 mm dia Metre 8.00 1406

800 mm dia Metre 10.00 1433
800 mm dia Metre 12.00 1475
900 mm dia 8.00 1707

900 mm dia Metre 10.00 1737
900 mm dia Metre 12.00 1788
1000 mm dia Metre 8.00 1889

1000 mm dia Metre 10.00 1921
1000 mm dia Metre 12.00 1976
1000 mm dia Metre 14.00 2002
1100 mm dia Metre 10.00 1982

1100 mm dia Metre 12.00 2041
1100 mm dia Metre 14.00 2069
1100 mm dia Metre 16.00 2126
1200 mm dia Metre 10.00 2044

1200 mm dia Metre 12.00 2108
1200 mm dia Metre 14.00 2138
1200 mm dia Metre 16.00 2199
1200 mm dia Metre 18.00 2261
1300 mm dia Metre 10.00 2107

1300 mm dia Metre 12.00 2177
1300 mm dia Metre 14.00 2209
1300 mm dia Metre 16.00 2276
1300 mm dia Metre 18.00 2342
1300 mm dia Metre 20.00 2431
1400 mm dia Metre 10.00 2316

1400 mm dia Metre 12.00 2390
1400 mm dia Metre 14.00 2425
1400 mm dia Metre 16.00 2495
1400 mm dia Metre 18.00 2568
1400 mm dia Metre 20.00 2596
1400 mm dia Metre 22.00 2748
1500 mm dia Metre 10.00 2371

1500 mm dia Metre 12.00 2450
1500 mm dia Metre 14.00 2488
1500 mm dia Metre 16.00 2562
1500 mm dia Metre 18.00 2639
1500 mm dia Metre 20.00 2742
1500 mm dia Metre 22.00 2770
1500 mm dia Metre 24.00 2875
1600 mm dia Metre 10.00 2427

1600 mm dia Metre 12.00 2511
1600 mm dia Metre 14.00 2552
1600 mm dia Metre 16.00 2633
1600 mm dia Metre 18.00 2715
1600 mm dia Metre 20.00 2820
1600 mm dia Metre 22.00 2898
1600 mm dia Metre 24.00 3028
1600 mm dia Metre 26.00 3170
1700 mm dia Metre 10.00 2487

1700 mm dia Metre 12.00 2576
1700 mm dia Metre 14.00 2618
1700 mm dia Metre 16.00 2703
1700 mm dia Metre 18.00 2790
1700 mm dia Metre 20.00 2904
1700 mm dia Metre 22.00 3019
1700 mm dia Metre 24.00 3146
1700 mm dia Metre 26.00 3285
1700 mm dia Metre 28.00 3432
1800 mm dia Metre 10.00 2752

1800 mm dia Metre 12.00 2846
1800 mm dia Metre 14.00 2891
1800 mm dia Metre 16.00 2979
1800 mm dia Metre 18.00 3074
1800 mm dia Metre 20.00 3191
1800 mm dia Metre 22.00 3314
1800 mm dia Metre 24.00 3449
1800 mm dia Metre 26.00 3595
1800 mm dia Metre 28.00 3749
1900 mm dia Metre 10.00 3151

1900 mm dia Metre 12.00 3252
1900 mm dia Metre 14.00 3298
1900 mm dia Metre 16.00 3393
1900 mm dia Metre 18.00 3492
1900 mm dia Metre 20.00 3615
1900 mm dia Metre 22.00 3744
1900 mm dia Metre 24.00 3885
1900 mm dia Metre 26.00 4038
1900 mm dia Metre 28.00 4205
2000 mm dia Metre 10.00 3983

2000 mm dia Metre 12.00 4088
2000 mm dia Metre 14.00 4136
2000 mm dia Metre 16.00 4235
2000 mm dia Metre 18.00 4338
2000 mm dia Metre 20.00 4469
2000 mm dia Metre 22.00 4511
2000 mm dia Metre 24.00 4658
2000 mm dia Metre 26.00 4821
2000 mm dia Metre 28.00 4994
2000 mm dia Metre 30.00 5273
2100 mm dia Metre 12.00 4591

2100 mm dia Metre 14.00 4644
2100 mm dia Metre 16.00 4746
2100 mm dia Metre 18.00 4857
2100 mm dia Metre 20.00 4993
2100 mm dia Metre 22.00 5136
2100 mm dia Metre 24.00 5289
2100 mm dia Metre 26.00 5458
2100 mm dia Metre 28.00 5480
2100 mm dia Metre 30.00 5769
2100 mm dia Metre 32.00 5810
2100 mm dia Metre 34.00 6150
2200 mm dia Metre 12.00 5118

2200 mm dia Metre 14.00 5173
2200 mm dia Metre 16.00 5280
2200 mm dia Metre 18.00 5395
2200 mm dia Metre 20.00 5378
2200 mm dia Metre 22.00 5528
2200 mm dia Metre 24.00 5689
2200 mm dia Metre 26.00 5866
2200 mm dia Metre 28.00 6056
2200 mm dia Metre 30.00 6352
2200 mm dia Metre 32.00 6528
2200 mm dia Metre 34.00 6696
2200 mm dia Metre 36.00 7116
2300 mm dia Metre 12.00 5811

2300 mm dia Metre 14.00 5867
2300 mm dia Metre 16.00 5980
2300 mm dia Metre 18.00 6101
2300 mm dia Metre 20.00 6248
2300 mm dia Metre 22.00 6424
2300 mm dia Metre 24.00 6573
2300 mm dia Metre 26.00 6757
2300 mm dia Metre 28.00 6794
2300 mm dia Metre 30.00 7099
2300 mm dia Metre 32.00 7287
2300 mm dia Metre 34.00 7411
2300 mm dia Metre 36.00 7894
2400 mm dia Metre 12.00 6997

2400 mm dia Metre 14.00 7055
2400 mm dia Metre 16.00 7172
2400 mm dia Metre 18.00 7297
2400 mm dia Metre 20.00 7453
2400 mm dia Metre 22.00 7614
2400 mm dia Metre 24.00 7789
2400 mm dia Metre 26.00 7981
2400 mm dia Metre 28.00 8188
2400 mm dia Metre 30.00 8410
2400 mm dia Metre 32.00 8604
2400 mm dia Metre 34.00 8848
2400 mm dia Metre 36.00 9166
2500 mm dia Metre 14.00 8617

2500 mm dia Metre 16.00 8738
2500 mm dia Metre 18.00 8896
2500 mm dia Metre 20.00 9031
2500 mm dia Metre 22.00 9198
2500 mm dia Metre 24.00 9379
2500 mm dia Metre 26.00 9581
2500 mm dia Metre 28.00 9795
2500 mm dia Metre 30.00 10024
2500 mm dia Metre 32.00 10272
2500 mm dia Metre 34.00 10535
2500 mm dia Metre 36.00 10811
2600 mm dia Metre 14.00 8805

2600 mm dia Metre 16.00 8932
2600 mm dia Metre 18.00 9069
2600 mm dia Metre 20.00 9232
2600 mm dia Metre 22.00 9408
2600 mm dia Metre 24.00 9597
2600 mm dia Metre 26.00 9805
2600 mm dia Metre 28.00 10027
2600 mm dia Metre 30.00 10267
2600 mm dia Metre 32.00 10523
2600 mm dia Metre 34.00 10795
2600 mm dia Metre 36.00 11081
2600 mm dia Metre 38.00 11390
2600 mm dia Metre 40.00 11713
2600 mm dia Metre 42.00 12049
2700 mm dia Metre 18.00 9147

2700 mm dia Metre 20.00 9320
2700 mm dia Metre 22.00 9500
2700 mm dia Metre 24.00 9697
2700 mm dia Metre 26.00 9913
2700 mm dia Metre 28.00 10143
2700 mm dia Metre 30.00 10391
2700 mm dia Metre 32.00 10655
2700 mm dia Metre 34.00 10940
2700 mm dia Metre 36.00 11238
2700 mm dia Metre 38.00 11555
2700 mm dia Metre 40.00 11887
2700 mm dia Metre 42.00 12295
2800 mm dia Metre 18.00 9341

2800 mm dia Metre 20.00 9516
2800 mm dia Metre 22.00 9704
2800 mm dia Metre 24.00 9910
2800 mm dia Metre 26.00 10131
2800 mm dia Metre 28.00 10369
2800 mm dia Metre 30.00 10625
2800 mm dia Metre 32.00 10902
2800 mm dia Metre 34.00 11194
2800 mm dia Metre 36.00 11393
2800 mm dia Metre 38.00 11719
2800 mm dia Metre 40.00 12068
2800 mm dia Metre 42.00 12431
2900 mm dia Metre 18.00 10629

2900 mm dia Metre 20.00 10814
2900 mm dia Metre 22.00 11006
2900 mm dia Metre 24.00 11218
2900 mm dia Metre 26.00 11448
2900 mm dia Metre 28.00 11696
2900 mm dia Metre 30.00 11962
2900 mm dia Metre 32.00 12244
2900 mm dia Metre 34.00 12547
2900 mm dia Metre 36.00 12869
2900 mm dia Metre 38.00 13206
2900 mm dia Metre 40.00 13563
2900 mm dia Metre 42.00 13938
3000 mm dia Metre 18.00 10715

3000 mm dia Metre 20.00 10904
3000 mm dia Metre 22.00 11104
3000 mm dia Metre 24.00 11322
3000 mm dia Metre 26.00 11562
3000 mm dia Metre 28.00 11816
3000 mm dia Metre 30.00 12090
3000 mm dia Metre 32.00 12385
3000 mm dia Metre 34.00 12697
3000 mm dia Metre 36.00 13028
3000 mm dia Metre 38.00 13378
3000 mm dia Metre 40.00 13748
3000 mm dia Metre 42.00 14135
The above rates of MS Spiral pipes are based on the following raw materials cost.
MS Plates = Rs 41,000/- Per MT.
The rates may be revised depending upon the increase/decrease in the cost of raw materials (landed
price) as per the following method.
Revised Cost = Cost as per the above table "R1".
R1= Variation (Increase/Decrease) in cost (Rs. Per metre) due to change in cost of MS Plates =
(M2-M1)/1000 x Wm
M1= Rs 41,000/-
M2= Cost of MS Plates (Rs. Per MT including all taxes and freight )
at the time of preparation of estimate
Wm=Weight of MS Plates required (Kg) per meter of pipe
estimate.
15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2016-17. (PE - 80 Grade)
4.0 kg/
Sl.No Description sqcm
1 2 4
Manufacture, Supply, & Delivery of HDPE pipes conforming
to IS 4984 - 1995 including transportation to anywhere in T.G,
excluding excise duty, sale tax and specials etc., complete.
(supply upto 90 mm diain coil & above 90 mm dia straight
lengths in 6 m.)
Rate per Meter
OD 40 mm 41
OD 50 mm 61
OD 63 mm 84
OD 75 mm 114
OD 90 mm 163
OD 110 mm 243
OD 125 mm 314
OD 140 mm 387
OD 160 mm 506
OD 180 mm 639
OD 200 mm 783
OD 225 mm 1018
OD 250 mm 1260
OD 280 mm 1570
OD 315 mm 1995
OD 355 mm 2426
OD 400 mm 3143
OD 450 mm 3995
OD 500 mm 4908
OD 560 mm 6071
OD 630 mm 7679
OD 710 mm 9758
OD 800 mm 12351
OD 900 mm 15650
OD 1000 mm 19272
Note: Excise duty, CST / VAT extra as applicable at the time of supply.
The IPCL resin cost adopted for the above rates are
For PE - 80 grade Rs.98750/- per MT. (Excluding CED&ST)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Meter excluding CED & ST
P1 = Existing pipe price in Rs. Per Meter excluding CED & ST
A2 = Revised price of raw material Rs. Per MT excluding CED & ST
A1 = Existing price of raw material Rs. Per MT excluding CED & ST
M = Weight of pipe in Kgs per Meter as per weight chart.
16. S o R FOR H.D.P.E PIPES FOR THE YEAR 2016-17. (PE - 100 Grade)
6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0
Sl.
Description sqcm sqcm sqcm kg/ kg/
No
sqcm sqcm
1 2 3 4 5 6 7
I Manufacture, Supply, &
Delivery of HDPE Pipes
conforming to IS 4984 - 1995
including transportation to
any where in T.G, excluding
excise duty, sale tax and
specials etc., complete.
(supply upto 90 mm diain
coil & above 90 mm
diastraight length in 6 m.)
Rate per Meter
OD 20 mm 32
OD 25 mm 42
OD 32 mm 41 54 68
OD 40 mm 53 64 81 104
OD 50 mm 65 81 98 126 161
OD 63 mm 98 125 151 199 251
OD 75 mm 139 177 214 284 357
OD 90 mm 198 253 303 402 518
OD 110 mm 297 377 449 606 751
OD 125 mm 379 486 584 776 966
OD 140 mm 476 608 731 977 1220
OD 160 mm 623 792 952 1273 1582
OD 180 mm 783 1002 1206 1607 1995
OD 200 mm 968 1238 1486 1991 2465
OD 225 mm 1250 1598 1923 2511 3112
OD 250 mm 1538 1975 2374 3100 3845
OD 280 mm 1928 2472 2970 3896 4831
OD 315 mm 2444 3131 3763 4912 6112
OD 355 mm 3067 3923 4721 6249 7779
OD 400 mm 4039 5159 6194 8090 10035
OD 450 mm 5018 6436 7740 10228 12619
OD 500 mm 6206 7935 9548 12633 15110
OD 560 mm 7211 9227 11033 14155
OD 630 mm 9091 11675 13977 16768
OD 710 mm 11564 14795 17753
OD 800 mm 14675 18784 22607
OD 900 mm 18592 23779
OD 1000 mm 22926
Note:-
Excise duty, CST / VAT extra as applicable at the time of supply.
The IPCL resin cost adopted for the above rates are
For PE - 100 grade Rs.99580/- per MT. (Excluding CED&ST)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Metre excluding CED & ST
P1 = Existing pipe price in Rs. Per Metre excluding CED & ST
A2 = Revised price of raw material Rs. Per MT excluding CED & ST
A1 = Existing price of raw material Rs. Per MT excluding CED & ST
M = Weight of pipe in Kgs per Metre as per weight chart.
17. S o R FOR H.D.P.E FITTINGS FOR THE YEAR 2016-17.
Manufacture, Supply, & Delivery of HDPE fittings conforming to IS

4984 - 1995 including transportation to anywhere in T.G. Excluding
excise duty, sale tax and specials etc., complete
I (a) PIPE ENDS LONG NECK Rate per Each
OD 50 mm 75
OD 63 mm 95
OD 75 mm 114
OD 90 mm 147
OD 110 mm 204
OD 125 mm 368
OD 140 mm 371
OD 160 mm 518
OD 180 mm 734
OD 200 mm 944
OD 225 mm 1082
OD 250 mm 1268
OD 280 mm 1417
OD 315 mm 1634
OD 355 mm 3415
OD 400 mm 4551
OD 450 mm 7573
OD 500 mm 8428
(b) MS FLANGES Rate per Each
OD 50 mm 104
OD 63 mm 131
OD 75 mm 166
OD 90 mm 179
OD 110 mm 188
OD 125 mm 258
OD 140 mm 280
OD 160 mm 367
OD 180 mm 518
OD 200 mm 671
OD 225 mm 838
OD 250 mm 989
OD 280 mm 1122
OD 315 mm 1320
OD 355 mm 2236
OD 400 mm 2773
OD 450 mm 3621
OD 500 mm 4146
(c) END CAPS Rate per Each
OD 50 mm 50
OD 63 mm 62
OD 75 mm 77
OD 90 mm 102
OD 110 mm 117
OD 125 mm 160
OD 140 mm 187
OD 160 mm 287
OD 180 mm 466
OD 200 mm 509
OD 225 mm 530
OD 250 mm 754
OD 280 mm 772
OD 315 mm 1054
OD 355 mm 1626
OD 400 mm 2844
OD 450 mm 4574
OD 500 mm 8428
(d) REDUCERS Rate per Each
OD 50 mm x 63 mm 71
OD 63 mm x 75 mm 102
OD 75 mm x 90 mm 166
OD 90 mm x 110 mm 230
OD 110 mm x 125 mm 351
OD 125 mm x 140 mm 486
OD 140 mm x 160 mm 677
OD 160 mm x 180 mm 939
OD 180 mm x 200 mm 1212
OD 200 mm x 225 mm 1488
OD 225 mm x 250 mm 2029
OD 250 mm x 280 mm 2883
OD 280 mm x 315 mm 4075
OD 315 mm x 355 mm 4674
OD 355 mm x 400 mm 6596
OD 400 mm x 450 mm 6842
OD 450 mm x 500 mm 8773
(e) TEES Rate per Each
OD 50 mm 97
OD 63 mm 156
OD 75 mm 187
OD 90 mm 329
OD 110 mm 390
OD 125 mm 587
OD 140 mm 809
OD 160 mm 1394
OD 180 mm 1890
OD 200 mm 2603
OD 225 mm 3696
OD 250 mm 5059
OD 280 mm 7084
OD 315 mm 10097
OD 355 mm 14397
OD 400 mm 21089
OD 450 mm 29954
OD 500 mm 41140
(f) BENDS Rate per Each
OD 50 mm 62
OD 63 mm 136
OD 75 mm 177
OD 90 mm 303
OD 110 mm 400
OD 125 mm 591
OD 140 mm 777
OD 160 mm 1159
OD 180 mm 1664
OD 200 mm 2254
OD 225 mm 3197
OD 250 mm 4383
OD 280 mm 6320
OD 315 mm 8740
OD 355 mm 12116
OD 400 mm 18275
OD 450 mm 26868
OD 500 mm 36425
II
Providing and Fixing electro Fusion Ferrule Tapping saddle
manufactured from virgin resin of PE-80/PE-100 having blue/black
colour using food grade compounded raw material with quality
assurance certificate from quality agencies like CIPET etc. For usage
in drinking water system and having working pressure of 10 bar. The
cost shall include testing of all materials, labour all taxes (central &
state), inspection charges, transportation upto site, transit insurance,
loading, unloading, stacking, providing and fixing etc. Complete as
specified and directed by the Departmental Engineers.
SIZE Rate Each Rs.

(Main pipe outer diameter in mm & Tapping size in Inches)
63x1/2 879
63 x3/4 879
63 x1 879
63 x1/2 879
75 x1/2 879
75 x3/4 879
75 x1 879
90 x1/2 879
90 x3/4 879
90 x1 879
90 x 1 1/4 1140
90 x 1 1/2 1140
90 x2 1140
110x1/2 879
110 x3/4 879
110 x1 879
110 x 1 1/4 1140
110x1 1/2 1140
110x2 1140
160 x1/2 879
160 x3/4 879
160 x1 879
160 x 1 1/4 1246
160 x 1 1/2 1246
160 x 2 1246
200 x 1/2 1241
200 x 3/4 1241
200 x 1 1241
200 x 1 1/4 1794
200 x 2 1794
250 x 1/2 1241
250 x3/4 1241
250 x1 1241
250 x 1 1/4 1794
250 x1 1/2 1794
250 x 2 1794
315 x 1/2 1478
315 x3/4 1478
315x1 1478
315x1 1/4 2007
315x1 1/2 2007
315x2 2007
18. SoR FOR PVC PIPES FOR THE YEAR 2016-17
Sl. 4.0 6 .0 10 .0
Description 2
No. Kgs/cm Kgs/cm Kgs/cm2
2
1 2 3 4 5
Manufacture, Supply and Delivery of
Unplasticised PVCs Pipes for potable water
supplies conforming to IS : 4985/2000 (3rd
revision) with bell ends (Socket) as per
1 specification in light Grey/Natural Ivory Grey/
Any other Color (except White) inclusive of
transportation to the sub-divisional stores
anywhere in TG excluding Excise duty and Sales
Tax etc.
DIA IN MM Rate/Metre Rs. Rs. Rs.
20 15
25 22
32 33
40 31 51
50 47 78
63 52 75 113
75 76 103 164
90 104 149 232
110 151 215 346
125 197 275 452
140 246 354 561
160 324 459 735
180 413 591 942
200 502 719 1146
225 667 963 1532
250 776 1183 1866
280 1016 1495 2362
315 1286 1878 2981
355 1693 2457
400 2135 3126
estimate.
The resin cost adopted for the above rates is Rs.68608/- per MT(Basic rate, excluding CED)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed
subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Metre, P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT, A1 = Existing price of raw material Rs. Per MT
19. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2016-17
Code Description
No
1 2 4
Manufacture, Supply, & Delivery of unplasticized Non- Rates
pressure polyvinyl chloride(PVC-U) pipes of dark (any 2016-17
shade of brown) for use in underground drainage &
sewerage system conforming to IS 15328/2003) with
solvent cement jointing as per specification inclusive of
transportation to the sub-divisional stores anywhere in
T.G, excluding Central Excise Duty, Cess, & VAT etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 160 mm 271
OD 200 mm 414
OD 250mm 641
OD 315 mm 1011
Pipe Series (S20)
OD 125 mm 211
OD 160 mm 337
OD 200 mm 511
OD 250mm 796
OD 315 mm 1250
Pipe Series (S16.5)
OD 110 mm 185
OD 125 mm 250
OD 160 mm 390
OD 200 mm 607
OD 250mm 941
OD 315 mm 1487
estimate.
The resin cost adopted for the above rates is Rs.68608/- per MT (Basic rate, excluding CED)
P2 = Revised pipe price in Rs. Per Metre
P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT
A1 = Existing price of raw material Rs. Per MT
M = Weight of pipe in Kgs per Meter as per weight chart.
20. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2016-17
Code Description
No
1 2 4
Manufacture, supply, & delivery of un-plasticized Non- Rates
Pressure Polyvinyl Chloride(PVC-U) pipes of dark (any 2016-17
shade of Brown) for use in underground drainage &
sewerage system conforming to IS 15328/2003) with
Elastomeric Seal Ring Joints (Ringtite PVC Pipes)as per
specification inclusive of transportation to the Sub-
Divisional stores any where in T.G, excluding Central
Excise Duty, Cess, & VAT etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 160 mm 291
OD 200 mm 440
OD 250mm 684
OD 315 mm 1077
Pipe Series (S20)
OD 125 mm 227
OD 160 mm 357
OD 200 mm 543
OD 250mm 846
OD 315 mm 1329
Pipe Series (S16.5)
OD 110 mm 197
OD 125 mm 266
OD 160 mm 417
OD 200 mm 642
OD 250mm 999
OD 315 mm 1577
estimate.
The resin cost adopted for the above rates is Rs.68608/- per MT (Basic rate, excluding CED)
P2 = Revised pipe price in Rs. Per Metre
P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT
A1 = Existing price of raw material Rs. Per MT
21. SoR FOR CENTRIFUGALLY CAST (SPUN) IRON PRESSURE PIPES
Sl.
Description Unit S.S. Rates for 2016-17
No.
1 2 3 4 5 6
Socket and Spigot Centrifugally Cast (Spun)
Iron pressure pipes for water, Gas and
Sewage conforming to specification No: IS
I 1536/2001 (third revision) with amdt. No: 1 &
2 in standard lengths of 3.66 m, 4 m, 4.5m, 5 LA Class A Class B Class
m, 5.5 m & 6 m and details given below, (Rs) (Rs) (Rs)
suitable either for lead jointing or rubber
gasket (push on) jointing at purchasers
option at ex-factory excluding transportation,
taxes & duties.
Nominal dia (in MM)
80 Rmt 693 751 808
100 Rmt 842 925 988
125 Rmt 1058 1155 1244
150 Rmt 1278 1400 1509
200 Rmt 1865 2025 2191
250 Rmt 2514 2737 2962
300 Rmt 3242 3546 3841
350 Rmt 4152 4505 4887
400 Rmt 5056 5525 5963
450 Rmt 6120 6724 7252
500 Rmt 7245 7892 8538
600 Rmt 9573 10451 11319
700 Rmt 12625 13793 14902
750 Rmt 14140 15461 16772
800 Rmt 15828 17247 18657
900 Rmt 19289 22328 22805
1000 Rmt 23175 25314 27361
II Conveyance of Centrifugally Cast (Spun)
Iron Pressure Pipes and accessories including
loading at Factory, un-loading at site and
Class
stacking for the following sizes. (The
Minimum distance/lead in Km for destination
below 100 Km to be taken as 100 Km)
SIZE IN MM UNIT LA A B
80 Per KM/RMT 0.26 0.26 0.26
100 Per KM/RMT 0.26 0.26 0.26
125 Per KM/RMT 0.40 0.40 0.40
150 Per KM/RMT 0.40 0.40 0.40
200 Per KM/RMT 0.67 0.67 0.67
250 Per KM/RMT 0.81 0.81 0.81
300 Per KM/RMT 1.07 1.20 1.20
350 Per KM/RMT 1.47 1.47 1.60
400 Per KM/RMT 1.73 1.73 1.86
450 Per KM/RMT 2.01 2.14 2.27
500 Per KM/RMT 2.40 2.54 2.67
600 Per KM/RMT 2.40 2.54 2.67
700 Per KM/RMT 2.40 2.54 2.67
750 Per KM/RMT 4.00 4.26 4.54
800 Per KM/RMT 6.80 6.80 6.80
900 Per KM/RMT 6.80 6.80 6.80
1000 Per KM/RMT 6.80 6.80 6.80
Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate.
Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*1.0
Where M= Weight of pipe in kg per metre.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron (Rs per MT excluding CED&ST)) at the time of preparation of
estimate.
R1 = Price of Pig Iron (Rs per MT excluding CED&ST) at the time of preparation of SSR =Rs.
22,000/-
22.S o R FOR DUCTILE IRON PRESSURE PIPES FOR THE YEAR2016-17
S.S. Rate
Sl.
Description Unit for
No.
2016-17
1 2 3 4 5
Centrifugally cast (Spun) Ductile Iron pressure
pipes for water, gas and sewage with Socket
Spigot ends conforming to IS.: 8329/2000 in
standard working lengths of 4, 5 5.5 & 6 meter
1 for classification K9 & K7 suitable for push-on-
joint (rubber gasket d jointing) with cement
mortar lining inside the pipes with outside zinc
coating. Rates are ex-factory, excluding
transportation, taxes & duties.
Nominal Dia in mm Rmt K7 K9
100 Rmt 790 941
150 Rmt 1090 1387
200 Rmt 1525 1851
250 Rmt 2047 2429
300 Rmt 2632 3076
350 Rmt 3315 3834
400 Rmt 4026 4625
450 Rmt 4849 5535
500 Rmt 5783 6440
600 Rmt 7699 8492
700 Rmt 9971 10990
750 Rmt 11176 12333
800 Rmt 12344 13606
900 Rmt 15063 16600
1000 Rmt 17846 19668
1100 Rmt 20892
1200 Rmt 24440
pipes for water, gas and sewage with plain ends
conforming to IS:8329/2000in standard working
lengths of 4, 5, 5.5 & 6 meter for classification
2
K9 & K7 with cement mortar lining inside the
pipes with outside zinc coating. Rates are ex-
factory, excluding transportation, taxes &
duties.
Nominal Dia in mm K7 K9
100 Rmt 669 861
150 Rmt 963 1262
200 Rmt 1375 1716
250 Rmt 1789 2280
300 Rmt 2362 2885
350 Rmt 2967 3584
400 Rmt 3593 4322
450 Rmt 4309 5105
500 Rmt 5134 6108
600 Rmt 6801 7869
700 Rmt 9031 9985
750 Rmt 10106 11187
800 Rmt 11170 12351
900 Rmt 13507 14936
1000 Rmt 16058 17756
1100 Rmt 18740
1200 Rmt 21822
pies with flanged (welded) ends for water, gas,
sewage conforming to IS: 8329/2000 in standard
working lengths of 1,2,3, 4, 5 mts for
3
classification K9 with cement mortar lining
inside the pipes with outside zinc coating. Rates
are ex-factory, excluding transportation, taxes &
duties.
1.0 Mt. 2.0 Mt.
Nominal Dia in mm
Length Length
100 Each 3458 4468
150 Each 4877 6341
200 Each 6434 8425
250 Each 8397 11054
300 Each 10479 13835
350 Each 16455 20623
400 Each 20485 25522
450 Each 24746 30687
500 Each 29954 36933
600 Each 42409 51587
700 Each 50600 62246
800 Each 62368 76775
900 Each 74318 91736
1000 Each 95990 116861
1100 Each 111639 133744
3.0 Mt. 4.0 Mt.
Length Length
100 Each 5477 5962
150 Each 7806 8620
200 Each 10420 11661
250 Each 13712 15400
300 Each 17184 19415
350 Each 24793 27021
400 Each 30559 32841
450 Each 36626 39231
500 Each 43911 46891
600 Each 60765 64254
700 Each 73894 78667
800 Each 91178 97159
900 Each 109156 116588
1000 Each 136818 144623
1100 Each 156334 184454
5.0 Mt.
Length
100 Each 6948
150 Each 10073
200 Each 13653
250 Each 18055
300 Each 22774
350 Each 31189
400 Each 37871
450 Each 45167
500 Each 53857
600 Each 73409
700 Each 90290
800 Each 111533
900 Each 138110
1000 Each 165288
1100 Each 197001
Conveyance of Ductile Iron Pressure Pipes and WELDED
accessories including loading at Factory, un- DOUBLE
4 Class
loading at site and stacking for the following FLANGED
sizes PIPES
SIZE IN MM UNIT K7 K9 K9
100 Per KM/RMT 0.22 0.22 0.33
150 Per KM/RMT 0.33 0.33 0.44
200 Per KM/RMT 0.33 0.44 0.66
250 Per KM/RMT 0.44 0.55 0.88
300 Per KM/RMT 0.66 0.66 1.10
350 Per KM/RMT 0.77 0.88 1.32
400 Per KM/RMT 0.88 0.99 1.54
450 Per KM/RMT 1.10 1.21 1.87
500 Per KM/RMT 1.32 1.43 2.20
600 Per KM/RMT 1.87 1.87 2.86
700 Per KM/RMT 2.75 2.75 4.18
750 Per KM/RMT 3.30 3.30 5.06
800 Per KM/RMT 5.61 5.61 8.36
900 Per KM/RMT 5.61 5.61 8.36
1000 Per KM/RMT 5.61 5.61 8.36
1100 Per KM/RMT 5.61 5.61 -
1200 Per KM/RMT 6.00 6.00
Supply and Delivery of Polyethylene (PE)
5 Sleeves for Ductile Iron Pipes used to guard the
pipe against corrosion.
DIA IN MM
100 mm dia RMT 41
150 mm dia RMT 50
200 mm dia RMT 64
250 mm dia RMT 74
300 mm dia RMT 81
350 mm dia RMT 91
400 mm dia RMT 127
450 mm dia RMT 127
500 mm dia RMT 154
600 mm dia RMT 154
700 mm dia RMT 200
750 mm dia RMT 200
800 mm dia RMT 200
900 mm dia RMT 227
1000 mm dia RMT 227
1100 mm dia RMT 227
Additional price for HAC(high alumina cement
6
motar lining)
DIA IN MM
100 mm dia RMT 55
150 mm dia RMT 73
200 mm dia RMT 89
250 mm dia RMT 106
300 mm dia RMT 114
350 mm dia RMT 130
400 mm dia RMT 178
450 mm dia RMT 178
500 mm dia RMT 220
600 mm dia RMT 220
700 mm dia RMT 282
750 mm dia RMT 282
800 mm dia RMT 282
900 mm dia RMT 322
1000 mm dia RMT 322
1100 mm dia RMT 322
1200 mm dia RMT 322
estimate.
Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per metre as per I.S.8329-2000.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation
of SoR =Rs.22,000/-
23. S o R FOR DUCTILE IRON FITTINGS FOR THE YEAR 2016-17
Sl. No. Description Unit

1 2 3
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000
having dimensions as per table. The rates mentioned here under are for
fittings, zinc coated externally with inside mortar lining (with finishing as per
class 13/IS 9523/2000) ( ex-works) Excluding Transportation, Taxes and
Duties etc.
I DI double socket branch flange Tee
Upto 500 x 500 mm dia Kg 100.00
Above 500 x 500 mm dia Kg 112.00
II DI All Socket Tees

Upto 300 x 300 mm dia Kg 100.00
III DI Double socket Tapers (Reducer)

Upto 500 x 450 mm dia Kg 100.00
IV DI Flanged Socket
Upto 500 mm dia Kg 100.00
Above 500 mm dia Kg 112.00
V DI Flanged Spigot
VI DI Double Socket Duck Foot Bend

Upto 300mm dia Kg 100.00
Above 300mm dia Kg 112.00
VII DI Double Flange Duck/Foot bend

VIII DI All socket Cross.

Upto 300 x 300 mm dia Kg 100.00
IX DI All Flange Tee

Upto 500 x 500 mm dia Kg 100.00
X DI All Flange Cross

Upto 300 x 300 mm dia Kg 100.00
XI DI Double Flange Reducer

Upto 500 x 450 mm dia Kg 100.00
XII Blank Flange

XIII Mechanical Joints

XIV DI Double Socket Bends

XV DI Double Flanged Bends

estimate.
24. S o R FOR RUBBER GASKETS SUITABLE FORC.I/ D.I. S/S PIPES

S.S Rates
Sl.
Description Unit For
No.
2016-17
1 2 3 4
Manufacture as per BIS:12820/2004 with S.B.R. Quality
Rubber confirming to BIS: 5382/85, supply and delivery of
Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in
T.G. F.O.R. Destination departmental stores including cost of
1
material, loading, incidental handling with companies standard
packing, transportation, unloading & stacking but excluding
central excise duty, sales tax, octroi and other Govt. Levies
etc., complete.
80mm dia Each 63
100mm dia Each 98
125mm dia Each 117
150mm dia Each 143
200mm dia Each 174
250mm dia Each 194
300mm dia Each 295
350mm dia Each 374
400mm dia Each 408
450mm dia Each 439
500mm dia Each 609
600mm dia Each 722
700mm dia Each 959
750mm dia Each 1065
800mm dia Each 1277
900mm dia Each 1541
1000mm dia Each 1686
estimate.
25. S o R FOR CI PIPES AND SPECIALS FOR THE YEAR 2016-17
Rate/ Kg
including
packing,
forwarding,
Sl. Quality or
Description Transit risk and
No. sort
delivery any
where in T.G. for
the year 2016-17.
Rs.
1 2 3 4
I.S. No.
Manufacture, Supply and Delivery of Cast Iron Pipes and 7181/1986
Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988
5531/1988, 3950/1979 and C.I.D Joints confirming to is 3950/1979
& 70.02
No.8794/1988 at site of work anywhere in T.G. Including,
loading, unloading, transportation to site of work 8794/1988
stacking at site transit risk and package, excluding taxes
and duties.
Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be incorporated
in the SSR are based on the following raw materials cost.
Pig Iron: Rs.22,000/- per M.T.(excluding CED, Tax & Fright)
Coke : Rs.36,570/- per M.T. .(Excluding CED, Tax & Fright)
The rates may be revised depending upon the increase/decrease in the cost of raw materials as
per the following method. For every increase/decrease of Rs.1000/- in the cost of raw
materials or part there of proportionately.
In respect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.
In respect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.
The above price is at site of work , Excise duty, CST/VAT extra as applicable at the time of
supply.
of estimate.
26. S o R FOR WATER HAMMER CONTROL DEVICES FOR THE YEAR 2016-17
(Rate Each in Rs.)
TEST PRESSURE
Additional
charges
Sl.
Description 10 15 25 for
No. 20 Kgs/cm2
Kgs/cm2 Kgs/cm2 Kgs/cm2 Flanged
ended
valves
1 2 3 4 5 6 7
Manufacture, supply and
delivery of zero velocity
valve/ PSLV with CI body
with flanged ends as per
1
AWWA, ex-factory
excluding transportation,
central excise duty and sale
tax etc., complete.
DIA IN MM
Rate/Each Rs. Rs. Rs. Rs.
150 70275 82031 86878 95568
200 73417 84428 90762 99836
250 82835 95259 102404 112645
300 93220 107203 115246 126768
Manufacture, Supply and
delivery of zero velocity
valve/ PSLV with MS
Fabricated Body with Plain
2 ends. as per AWWA, Ex-
factory excluding
transportation, Central
Excise duty and sale tax etc.
Complete
DIA IN MM Rate/ Each Rs. Rs. Rs. Rs. Rs.
350 99288 114180 122744 135017 8603
400 109748 126209 135675 149248 10373
450 127645 146793 157802 173583 12396
500 147526 169653 182378 200616 13410
525/550 158460 180138 198399 218238 17330
600 177423 204035 219338 241272 24722
650 198604 218467 248321 268056 27957
700 231497 254772 289434 312583 33396
750 256416 282094 320552 346231 37494
800 312360 359217 386155 424768 42251
900 371260 426949 450341 504868 51107
1000 450341 450341 450341 625798 64894

1050 454844 454844 454844 658915 67491
1100 573755 650592 709321 780255 75142
1200 690565 759637 865389 932309 85008
1400 1035848 1139453 1298084 1398459 119543
1500 1206940 1327622 1508641 1629199 121934
1600 1231078 1354172 1538815 1661780 127513
Manufacture, Supply and
delivery of Air Cushion
valves / Quick Released
damped Air Valves (QRDA)
3 as per AWWA, Ex-factory
excluding transportation,
Central Excise duty and
sale tax etc., complete.
DIA IN MM Rate/Each Rs. Rs. Rs. Rs.
100 64263 73904 81293 89419
150 97659 112308 123538 135892
200 104237 119871 131860 145045
Conveyance of valves and
accessories including
4 loading at factory and 5% on basic cost of valves
unloading, stacking at site
of work.
of estimate.
27. S o R FOR CAST STEEL VALVES FOR THE YEAR 2016-17.

Sl.No. Description TEST PRESSURES
1 2 3 4 5 6
Manufacture, Supply and Delivery of
Cast Carbon Steel rising / Non rising
spindle sluice valve design standard
as per IS:14846/2000 for Water
Supply Scheme with SS Spindle & SS Class-150
Class-300
Working parts the grade of Cast Body
Body 1100
Steel for body Bonnet, Dome, Stool 425PSI FOR Enclosed Spur
1 PSI Seat
Cover, Wedge, Stuffing Box, Gland Seat 300 Gear Arrangement.
750 PSI
Thrust Plate, shall be as per IS : 1030 PSI
PN-30
/ 1998. (The valve shall be used for PN-20
High pressure schemes & pumping
stations) excluding transportation,
Central Excise duty and sale tax etc.,
complete. ISI Marked
Rate/Each Class 150 Class 300
DIA IN MM Rs. Rs. Rs.
40 5729 11458
50 9440 17185
65 11814 21482
80 14169 25779
100 18897 34371
125 24235 44065
150 28354 51556
200 45794 93089 56048 102409
250 64454 146517 74708 155839
300 81420 185074 91673 194395
350 108570 246766 122552 259477
400 220547 501243 234529 513954
450 247206 550816 261189 563528
500 290831 660979 304813 673691
600 332031 753517 346014 766228
700 642251 656233
750 690723 710298
800 799784 819359
900 945201 964776
1000 1211796 1231370
1100 1308739 1328314
1200 1478390 1497965
Manufacture, Supply and delivery of

Cast Carbon Steel Bolted Cover Non
Return Valve as per IS : 5312 / Part1
/2004. Round body heavy duty
2 material spec. As per IS:1030/1998
with SS Hinge & Seat Rings.
excluding transportation, Central
Excise duty and sale tax etc.,
complete. Dia in mm.
Rate/Each Rs. PN-20 PN-30
40 5695 10356
50 8475 15422
65 10591 19279
80 12710 23135
100 17439 30847
125 21813 39660
150 23983 43624
200 36354 79317
250 50896 132196
300 72707 165245
350 96944 220327
400 198735 451669
450 222971 506751
500 261748 594882
600 302948 688519
Cast Steel Multi Door Type Non
return Valve as per IS; 5312/ Part II
/ 1984 Heavy duty material spec. as PN-20
3
per 1030/1998 with SS hinges & Seat
Rings excluding transportation,
Central Excise duty and sale tax etc.,
complete.
Rate/Each
500 440652
600 550816
700 660979
750 815208
800 1211796
900 1454154
1000 1586349
1100 1872775
1200 1894807

Cast Steel D/F Butter fly Valves
conforming to IS; 13095/1991
4 manually heavy duty Gear operation,
excluding transportation, Central
Excise duty and sale tax etc.,
complete.
DIA IN MM PN- PN-2.5
Rate/Each 1.0/1.6
300 84104 104843
350 113138 142171
400 135950 176273
450 164752 208532
500 187795 239639
600 218902 281115
700 343330 426282
750 426282 529972
800 467758 581817
900 529972 664769
1000 841043 1048423
1100 1048423 1359493
1200 1255803 1359493
1300 1682084 1877944
1400 1774253 1981634
1500 1877944 2085324
1600 2189014 2500085
1800 2707465 2914845
2000 3744366 4055436
Conveyance of valves and accessories
5% on basic cost of
5 including loading at factory and
valves
unloading, stacking at site of work.
Note : The duties and taxes as applicable shall be added as per rules at the time of preparation
of estimate.
28. S o R FOR DI D/F VALVES FOR THE YEAR 2016-17.Rate/Each in Rs.

Sl. TEST PRESSURE
Description
No.
1 2 3 4 5 6
Manufacture, supply and delivery of Single
Chamber DI Air Valve with Body and cover in
Ductile Iron of grade GGG-40/SG-400/15 or
GGG-50/SG-500/7 or equivalent grade as per
I.S.3896-part2-1985 and subsequent revisions.
1
All internal parts such as float, shell etc., all
cover bolts, of stainless steel, and Gaskets and
seals of EPDM food grade quality Epoxy
powder coating (EP-P) inside and outside colour
blue. Drilled as per requirement of the deptt.
DIA IN MM PN 10 PN 16 PN 25
25 (Screwed End) 9009 9009
32 (Screwed End) 17919 17919
40 (Screwed End) 18810 18810
50 32363 32363 41642
80 43175 43175 43175
100 50408 50408 57968
150 61366 61366 70132
200 67210 67210 78168
300 108900 108900 119900
Manufacture, Supply and delivery of DI D/F
Gate Valves (Soft Seated) Resilient seated soft
sealing gate valves (Sluice valves) with body
bonnet of ductile cast iron of grade GGG-40/ SG-
400/15 or GGG-50/SG-500/7 or equivalent grade
as per I.S.3896-part2-1985 and subsequent
revisions, wedge fully rubber lined with EPDM
2
food grade quality and seals of NBR and the
valves should be of vacuum tight and 100% leak
proof with face to face dimensions as per
BS5163-89/IS14846-2000/DIN 3202 F 4. All the
valves should be with Electrostatic powder
coating both inside and outside pocket less body
passage. Drilled as per requirement of the deptt.
50 7747 7747 13094
80 9922 9922 16144
100 13088 13088 18304
150 20607 20607 30531
200 34244 34244 51495
250 47429 47429 76487
300 71682 71682 124065

350 217030 217030 363053
400 227631 227631 369274
450 With By-pass & Gear 391622 391622 736134
500 With By-pass & Gear 415877 415877 781725
600 With By-pass & Gear 535531 535531 1006636
Butterfly Valves with GGG-40/SG-400/15 or
GGG-50/SG-500/7 or equivalent grade as per
I.S.3896-part 2-1985 and subsequent revisions,
Double eccentrically Disc., with renewable soft
seal on the disc and Body seat face of stainless
3
steel / nickel weld overlay, with powder or liquid
Epoxy coating with minimum thickness of 250
microns applied on both body and disc inside
and outside. Face to face dimensions as per
AWWA C 504 or BS 5155 or IS:13095. Drilled as
per requirement of dept.
DIA IN MM PN 10 PN 16 PN 25 PN 40
150 82590 82590 85256 113188
200 89954 92874 109124 137629
250 104808 107855 126328 192858
300 125059 128741 143595 202507
350 143087 156102 181811 220409
400 180221 204182 237727 336972
450 197850 219588 279661
500 199731 235759 374904 416406
600 261775 369600 435149 456271
700 516789 545294 819554
800 560262 583871 1196170
900 732712 732712
1000 918489 918489 1734523
1100 1056263 1056263
1200 1230671 1230671 1937679
1400 2644951 2644951
1600 3153860 3153860
1800 3868391 3868391
2000 6608212 6608212
2200 9540251 9540251

Swing Check Valves Slanted/Straight seated with
metallic, corrosion proof and wear resistant seat
faces resilient seat, Body and Disc of ductile cast
iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or
4 equivalent grade as per IS 3896(part2)-1985 and
subsequent revisions. All the inside and outside
of the body is to be coated with double coating of
epoxy liquid. Drilled as per requirement of
dept.. Specification and Dimensions as per I.S
5312 or equivalent codes.
DIA IN MM PN 10 PN 16 PN 25 PN 40
100 32726 36362
150 54954 61060
200 83337 88295 129492 169494
250 91714 97269 157270 198726
300 114962 121800 191459 242572
350 135304 143424 217786 264795
400 164364 174194 220520 286762
500 208982 221634 279496 367792
600 313546 332395 412024 532563
700 452569 493551 603279 765019
800 565875 616721 760709 963725
Manufacture, supply and delivery of DI (Ductile

Iron) Wafer Butterfly valves conforming to IS
13095 (and its amendments). With hand lever
5
below 150 mm, with Worm gear for 200 mm and
above excluding transportation, CED and taxes
etc, completed.
DIA IN MM PN 10 PN 16
40 5610 5610
50 5610 5610
65 6071 6071
80 6620 7255
100 9307 9648
125 11696 11696
150 15795 16137
200 21430 21430
250 28518 28518
300 40127 40127
350 48695 52824
Manufacture and supply of Air Release

Vacuum Break Surge Alleviation Valve for
potable water. Construction material Cylindrical
Body of Ductile Iron GGG-50/SG-500-7, Three
cylindrical Floats of High Density Poly Ethylene.
6
Baffle Plate, Orifice venture and all construction
bolts of stainless steel, coating internally and
externally. Electrostatically applied epoxy (1)
Flange connection as per IS 1538, (2) Female
(BSP/NPT Threaded for sizes 25 mm
25 mm dia 14814 - -
50 mm dia - 47740 47740
80 mm dia - 74896 74896
100 mm dia - 82583 82583
150 mm dia - 169358 169358
200 mm dia - 254354 254354
Manufacturer and supply of Metal Seated Gate
Valve Non- Rising Stem with by-pass & gear
operated, for water and sewage applications&
dimensions confirming to IS 14846-2000.
Material construction Body, Bonnet, Wedge and
Distance Piece of ductile iron GGG-50/SG500/7
DIN1693 or equivalent. Body seat, Wedge seat
and Stem nut of Aluminum Bronze BS EN 1982
7 CC331G/equivalent, Stem of Stainless steel BS
EN 100881.4057 or equivalent. 'O' Seal
Body/Cover is of EPDM food grade Quality.
Fastners is of Steel Sheraplex coated to BS 3692
Gr 8.8 or equivalent. Body and Bonnet internally
and externally blue two pack epoxy to WIS 4-52-
01 Class B. Leakage tested for seat 1.1 PN and
body 1.5 x PN. Flange connection as per IS 1538.
ISI Marked
DIA IN MM PN 10 PN 16
DN700 1372190 1372190
DN800 1734934 1734934
DN 900 1961180 1961180
DN 1000 2197338 2197338
DN 1100 2994069 2994069
DN 1200 3403190 3403190
NOTE:-All the prices are ex-go down /ex-factory. Excise duty and CST /Local Tax Extra as
applicable at the time of supply. Packaging and Transportation extra at 5% on basic cost. The
duties and taxes as applicable may be added as per rules at the time of preparation of estimate.
The grade of DI & conformation to specifications shall be certified by a third party Quality
Control Agency approved by indenting authority at the cost of supplier.
29. S o R FOR SFRC MAN-HOLE FRAME WITH COVERS FOR THE YEAR 2016-17
SoR for
Sl.No. Description Unit
2016-17.
1 2 3 4
Manufacture as per BIS:12592 (Part 1&2)
Supply & Delivery of manhole covers and
frames with ISI marking anywhere in T.G.,
F.O.R. destination including, loading, un-
I Rs.
loading & stacking at site but excluding central
excise duty, sales tax, octroi and other Govt
levies etc., as applicable.
I.S.I Mark
a) M.D. -10 with 500mm diaclear opening Each 1543
b) H.D.-20 with 500mm diaclear opening Each 1989
C) H.D.-10with 560mmdia clear opening(New item) Each 1560
d) H.D.-20 with 560mm diaclear opening Each 2133
e) H.D.-35 with 560mm diaclear opening. Each 2286
f) 24x24 MD 10 Each 1682
g) 24x18 MD 10 Each 1548
h) 24x24 HD 20 Each 1890
i) 24x18 HD 20 Each 1927
j) Deviders 0.9 mtr. Each 3957
Manufacture as per companys standard

specification supply and delivery of
encapsulated plastic steps for man holes
anywhere in T.G. including cost of materials
II Each 166
packing as per companys standards, loading,
transportation, unloading and stacking at site of
work etc, complete but excluding taxes such as
sales tax, C.E.D and others etc., as applicable.
of estimate.
30. S o R FOR CI and M.S. DISMANTLING JOINTS FOR THE YEAR 2016-17
Sl.No. Description Unit 2016-17.
1 2 3 4
Manufacture, Supply and Delivery of C.I Dismantling Joints
with both side flange end suitable for installation in between
1 flange end pipes. These rates are excluding Excise duty, Taxes Rs.
and transportation charges etc., complete.
Nominal Dia. In MM
50 Each 4606
80 Each 5042
100 Each 6616
125 Each 8507
150 Each 9332
200 Each 13234
250 Each 15754
300 Each 25208
Manufacture, Supply and Delivery of M.S. Dismantling Joints
with both side flange end suitable for installation in between
2 flange end pipes. Thickness as per IS: 7322. These rates are Each
excluding Excise duty, Taxes and transportation charges etc.,
complete
Nominal Dia. In MM
350 59785
400 68507
450 74325
500 88959
600 103515
700 115161
750 118075
800 141365
900 147482
1000 176660
1100 191245
1200 220420
1300 249592
1400 279334
1600 308566
1800 365405
2000 454730
Conveyance of joints and accessories including loading at factory 5% on
3
and unloading, stacking at site of work. basic cost
estimate.
31. OTHER ITEMS FOR THE YEAR 2016-17
S.S. Rates
Sl.
Description Unit for
No.
2016-17.
1 2 3 4
SUPPLY AND DELIVERY OF PIG LEAD 99.99
1 % PURE INCLUDING TAXES AND Per Kg
CONVEYANCE ETC., COMPLETE. 335
SUPPLY AND DELIVERY OF LEAD WOOL

2 BEST QUALITY INCLUDING TAXES AND Per Kg
CONVEYANCE ETC., COMPLETE. 176
SUPPLY AND DELIVERY OF SPUN YARN OF

3 BEST QUALITY INCLUDING TAXES AND Per Kg 134
CONVEYANCE ETC., COMPLETE.
SUPPLY AND DELIVERY OF RUBBER

4 PACKING INCLUDING TAXES AND
CONVEYANCE ETC., COMPLETE.
a) 3 MM THICK Per Kg 108
b) 6 MM THICK Per Kg 108
SUPPLY AND DELIVERY OF BOLTS AND
NUTS WITH DOUBLE WASHERS INCLUDING
5 Per Kg
TAXES AND CONVEYANCE ETC., COMPLETE. 129
(1/2" TO 1")
32. S o R FOR RUBBER RINGS SUITABLE FOR

SWG PIPES FOR THE YEAR 2016-17
S.S Rates
Sl.
No.
2016-17
1 2 3 4
Manufacture Supply of Rubber Rings made with EPDM
Rubber Rings (seals according to EN681 AND ASTM 425)
suitable for SWG pwipes confirming to IS No.651/1992 any
where in T.G , For including cost of materials, loading,
1 unloading , handling with company standard packing ,
transportation, unloading and stacking but excluding central
excise duty and other taxes etc complete. The Rubber Rings
shall be tested at the factory premises confirming to I.S
No.651/1992
100 mm dia Each 53
150 mm dia Each 80
200 mm dia Each 120
230 mm dia Each 146
250 mm dia Each 186
300 mm dia Each 213
350 mm dia Each 253
of estimate.
33. S o R FOR TRENCH LESS TECHNOLOGY WITH PIPE JACKING METHOD

S.S Rates
Sl.
No.
2016-17
1 2 3 4
Railway crossing/Road crossing/Canal crossing by adopting
trenchless technology tunneling work through specialized pipe
jacking method by erecting the equipment to true to the
alignment and gradient, by hydraulic pipe jacking technique
complete including tunneling, excavation in all types of soils
1 including hard rock and construction of RCC chambers
suitable to casing pipe pits, and conveyance charges of
machinery and other required materials but excluding cost of
encasing pipe, in co-ordination with the concerned authorities
as per approved drawings and directed by the Engineer-in
Charge.
800 mm dia Rmt 26000
900 mm dia Rmt 27300
1000 mm dia Rmt 28600
1100 mm dia Rmt 29900
1200 mm dia Rmt 31200
1300 mm dia Rmt 32500
1400mm dia Rmt 35100
1500 mm dia Rmt 39000
of estimate.
Sd/-
A
34. S.S. RATES FOR GLASS FIBRE REINFORCED PLASTIC (GRP) PIPES
The PH & ME department deleted GRP pipes from the SSR 2013-14 and was not
included in SoR 2014-15. The ENC (RWS) requested in the SoR meeting on 06.05.2015 to
incorporate GRP pipes from SoR-2015-16 for carrying out O&M works, accordingly the
following rates are adopted and ENC(RWS) addressed this office, vide Lr no
AE/DEE/TDWSP(Plg)/2015 dt 22.05.2015 to incorporate GRP pipes from SoR 2015-16 for
O&M works.
Sl.No. Description
1 2
GLASSFIBRE REINFORCED PLASTIC (GRP*) PIPES CONFORMING TO IS 12709
- 1994 Stiffness class 124 Kpa including transportation to any where in T.S. with
1 jointing materials i.e., Reka couplings, Rubber Gaskets etc., for jointing pipes including
cost of specials, loading, un-loading and stacking etc.,complete but excluding Central
Excise duty and to be added sale tax.
Size Unit SoR For 2016-17 Rs.
3 Bar 6 Bar 9 Bar 12 Bar 15 Bar
300 mm dia Metre 2453 2521 2592 2660 2776
350 mm dia Metre 2633 2670 2752 2829 2958
400 mm dia Metre 2931 3062 3176 3322 3453
450 mm dia Metre 3440 3573 3768 3954 4179
500 mm dia Metre 3787 3941 4165 4426 4679
600 mm dia Metre 4980 5186 5501 6060 6343
700 mm dia Metre 5971 6242 7001 7636 8215
800 mm dia Metre 7309 7653 8263 8990 9705
900 mm dia Metre 9136 9525 10347 11222 12153
1000 mm dia Metre 10950 11454 12320 13437 14482
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of
2
transportation of water and emptying pipe line after completion of field testing.
Size Unit S.S. Rates for 2016-17. Rs.
3 Bar 6 Bar 9 Bar 12 Bar 15 Bar
300 mm dia Metre 107 107 107 107 107
350 mm dia Metre 160 160 160 160 160
400 mm dia Metre 240 240 240 240 240
450 mm dia Metre 293 293 293 293 293
500 mm dia Metre 373 373 373 373 373
600 mm dia Metre 399 399 399 399 399
700 mm dia Metre 452 452 452 452 452
800 mm dia Metre 532 532 532 532 532
900 mm dia Metre 585 585 585 585 585
1000 mm dia Meter 679 679 679 679 679

*Under any Circumstances the GRP pipes shall not be procured for laying new water
lines, except O&M works.
Note: 1) The material component is 50% of total cost.

2) The duties and taxes as applicable shall be added as per rules at the time of
preparation of estimate
3) The cost of other specials like tees, reducers etc with flange will be charge @4 times per meter
cost of pipe.
4) The cost of other special like plain ended tees, reducers etc will be charge @ 2.50 times per
meter cost of pipe.
The methodology adopted for rates is as follows:
Percentage of raw materials in the finished product of the pipe
1) Hoop Glass Fibre Rovings H% (35%), 2) Chop Glass C% (40%) and 3) Resin R% (25%)
The cost of variation in Raw materials are:
1) Variation in cost of Hoop Glass : h%
2) Variation in cost of Chop Glass : c%
3) Variation in cost of Resin : r%
The percentage of variation in cost of pipe allowed is (H x h + C x c + R x r)/100
The above raw materials rates are obtained from the principal manufacturers.
The rates of raw materials are:
1) Hoop Glass Fibre Rovings - Rs. 81.00/kg (Excluding CED&ST)
2) Chop Glass - Rs. 91.00/kg (Excluding CED&ST)
3) Resin - Rs.130.00/kg (Excluding CED&ST)
LATEST G.O. ON
SEIGNIORAGE CHARGES
1
ABSTRACT
Mines and Minerals Revision of Rates of Seigniorage Fee and Dead Rent - Orders
Issued.
---------------------------------------------------------------------------------------------
INDUSTRIES AND COMMERCE (MINES.I) DEPARTMENT
G.O.MS.No. 67 Dated: 26/09/2015

Read the following
1) G.O.Ms.No.198, Industries & Commerce (M.I) Dept., dt:13.08.2009

2) Government Memo No.418/M.I(1)/2015, dated:08.07.2015.
3) From the Director of Mines and Geology, Hyderabad Letter
No.3305/MR/2014, dated:08.07.2015.
*****
O R D E R:
The following notification will be published in the Extra-Ordinary Issue of the

Telangana Gazettee dated:the 26th September, 2015.
NOTIFICATION
In exercise of the powers conferred by Section Sub-Section (1) of 15 of the

Mines & Minerals (Development & Regulation) At, 1957 (Central Act No.67 of
1957), the Government of Telangana hereby issue the following amendments to the
A.P. Minor Mineral Concession Rules, 1966 issued in G.O.Ms.No.1172, Industries &
Commerce (Mines-I) Department, dated:04-09-1967 and as amended subsequently
from time to time and as adapted vide G.O.Ms.No.55, Industries & Commerce
(Mines.I) Department, dated:26.08.2015 as A.P. Minor Mineral Concession Rules,
1966 (Telangana Adaptation) order, 2015.
AMENDMENTS
In the said rules, under rule 10 for Schedules I and II the following shall be
substituted, namely:
SCHEDULE-I
RATES OF SEIGNIORAGE FEE
Sl. Name of the Minor
Unit Rate of Seigniorage fee (In Rupees)
No. Mineral
Building Stone,
Rough Stone/
1 M3/MT 75/50
Boulders, Road Metal
and Ballast
Dimensional Stone
2
used for Kerbs & MT 100/MT
Cubes
The rate of royalty as applicable to Limestone
Lime Kankar/ (other than LD Grade) in respect of major
3 MT
Limestone Minerals as per the 2nd Schedule of the Mines &
Minerals (D&R) Act, 1957.
4 Marble M3/MT 250/100
5 Mosaic chips MT 45
Morrum/Gravel &
6 M3/MT 30/20
Ordinary Earth
7 Ordinary Sand M3/MT 40/27
8 Shingle M3/MT 25/17
9 Chalcedony Pebbles M3/MT 75/50
Fullers Earth/
10 MT 150
Bentonite
11 Shale/Slate MT 150
12 Rehmatti MT 25
8/100
13 Limestone slabs M2/MT
2
Brick Earth used in
the manufacture of
14 - Rs.6000/- per kiln per annum
Bricks including
Mangalore Tiles.
15 Granite useful for Gangsaw above Below 270 Equal and below
cutting and polishing 270 x above 150 X below 150 70
a Black Granite 3000 2300 1200
b Colour Granite 2300 2000 1000
The rates shown at Sl.No.15 shall come into force w.e.f., two years from the date of
this G.O. until then the rates ordered in G.O.Ms.No.198, Industries & Commerce
(M.I) Dept., dt:13.08.2009 shall continue to be inforce.
SCHEDULE-II
Rates of Dead Rent
Rate of Dead
Rent per
Sl.
Name of the mineral hectare per
No.
Annuam
(in Rs.)
1 Black Granite 1,00,000
2 Colour Granite 80,000
Limestone other than classified as Major Minerals used for Lime
burning or building construction purposes, Marble, Boulders,
3 Building Stone including Stone used for Road Metal, Fullers 50,000
Earth, Ballast Concrete and other Constructions purposes, Slate
and Pyllites.
Gravel Morrum, Shingle, Limestone Slabs, used for Flooring
4 purposes, Chalcedeny Pebbles used in the building purposes, 40,000
Limeshell for burning used for building purposes and Rehmatti.
2. The rate of royalty revised by Government of India with effect from

01.09.2014 in respect of (31) Major Minerals now declared as Minor Minerals and
transferred to the State Government in the extra-ordinary issue of the Gazette
Government of India Notification No.423(E) dated:10.02.2015 shall be continued,
until further orders.
3. This order issues with the concurrence of Finance Department vide their
U.O.No.11350/292/EBS-VII/I&C/2015, dated:18-09-2015.
(BY ORDER AND IN THE NAME OF THE GOVERNOR OF TELANGANA)
ARVIND KUMAR
SECRETARY TO GOVERNMENT & CIP
To,
The Commissioner of Printing, Stationary & Stores Purchase (Ptg. Wing)
Hyderabad. (He is requested to publish the above Notification in the
Extra-Ordinary issue of Telangana Gazette, and arrange to send 1000
copies of the same to Government in Industries & Commerce (M.I)
Department).
The Director of Mines and Geology, Telangana State, Hyderabad
The Vice Chairman & Managing Director, Telangana State Mineral
Development Corporation Ltd., Hyderabad.
All the Joint Director/Deputy Director/Assistant Directors of Mines and
Geology through the Director of Mines and Geology, Hyderabad
Copy to:
The Secretary to Government, Ministry of Mines, GoI
The Law (A) Department.
The Finance Department.
The Industries and Commerce (Mines.II) Department.
The P.S. to Honble Minister for Mines and Geology.
The P.S. to Secretary to Government &CIP, Ind. & Com. Dept.,
SF/Sc.(C.No.418/M.I(1)/2015)
//Forwarded::By order//
SECTION OFFICER

Sor 16-17 PDF

Uploaded by

Copyright:

Available Formats

Sor 16-17 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sor 16-17 PDF

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF TELANGANA

COMMON SCHEDULE OF RATES

BOARD OF CHIEF ENGINEERS

Sl. No. Description Page No.

4 Part-IV ( Public Health Works) 1 98

5 Annexure Latest G.O. on 1 3

Office of the Engineer-in-Chief (I.W)

Proc. No. ENC/IW/P&M/EE/DEE-2/AEE.4/SOR 16-17/Vol.I Dt:28.06.2016

The Government vide G.O. MS.No.15 T.R&B(R-1) Department Dt:24.12.2014

Any discrepancies found (or) corrections required in SoR 2016-17 may be

The receipt of the proceedings may be acknowledged.

Sd/- J.Vijaya Prakash, 28.06.2016

Sd/- J.Vijaya Prakash, 28.06.2016

Important Read The following

6) Estimate Sanction Authority shall examine the Components/Materials/Items

Sd/- J.Vijaya Prakash, 28.06.2016

Sl. No. Description Page No.

4 Basic input data for Irrigation 15 30

A) CORPORATIONS & MUNICIPALITIES:

a) i. 25% extra over the rates on labour component of works is

D) AGENCY / TRIBAL AREAS:

1. No extra percentage is permissible in respect of Forest

If more than one area allowance (such as those) for (1)

II. EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN

1) Trenches of not more than 2 metres in width : 25% extra

1) Up to 2 Metres depth : 25% extra

C. EXCAVATION IN RESTRICTED PLACES:-

1 Foundation of Buildings : 75% extra

III. SEIGNIORAGE CHARGES:

Sd/- J.Vijaya Prakash, 28.06.2016

1 Bar bender 565

2 Black smith / Tin smith / Rivetor 445

3 Blaster ( Licensed ) 515

4 Carpenter Cl- I 480

5 Electrician ( Licensed ) 515

6 Fitter Cl- I 480

7 Floor Polisher / Tile Layer 445

9 Gauge reader 430

10 Maistry / Work Inspector 460

11 Mason Cl- I / Brick layer Cl- I 445

12 Mechanic Cl- I 480

13 Operator Air compressor / DG set 445

14 Operator Batching plant 515

15 Operator Bus/Ambulance/ Lorry/ Tanker 515

16 Operator Concrete / Asphalt mixer 445

17 Operator Concrete / Asphalt paver 445

18 Operator Concrete pump / Placer/ ice plant 445

19 Operator Core drilling machine 515

20 Operator Crane/ Tower crane/ Cable way 515

21 Operator Drilling jumbo / Loco / Winch 445

22 Operator Grouting/ Guniting/ Shotcreting 445

23 Operator Jackhammer/Pneumatic tamper 445

24 Operator Pump / Ventilation fan 445

25 Operator Lathe/Drilling/Shearing machine 515

26 Operator Bending / Planing machine 445

27 Operator Road roller 445

28 Operator Shovel / Scraper / Dozer 515

29 Operator Spillway / Sluice gate 445

30 Operator Crusher / Conveyor / Mucker 445