AC 7000 CAN

MODULAR SWITCH-MODE CONVERTER

FOR TELECOMMUNICATION
AND INDUSTRIAL APPLICATIONS
Output current of a single power supply:
125 A (for 48 V DC)
100 A (for 60 V DC)
60 A (for 110 V DC)
30 A (for 220 V DC)

Applications Compact Design

The smart switch mode power supply AC 7000 CAN of AEG The compact 19-inch design of AC 7000 CAN converter
Power Solutions consists of three different types of devices. ensure that it can be used even when there is a little space
The devices with 110 VDC or 220 VDC are conceived for a available. The unit can be configured also in the redundant
variety of applications such as: supply of process control to systems using the N+1 principle.
conventional power plants and nuclear power plants, secure
supply of energy in conjunction with parallel connected Key Features
batteries, direct power supply to DC consumers of all kinds, » Mechanical strength and vibration resistance to KTA 3503
constant voltage and power source, on-board power supplies (110 V / 220 V)
in railway vehicles and ships powering the DC users. The » Low height and low weight
switchable device type 48 (60) VDC is specially designed to » Adjustable version 48 VDC/60 VDC
supply power to telecommunication systems and as a battery- » Capable of communication (CAN-Bus)
charging rectifier for the secure supply of DC power. » When operated with PSC 100:
• active current sharing
Communication • 4 charge characteristics
The unit offers full functionality in stand-alone mode but can • Temperature compensated battery charging
additionally be controlled and monitored via the digital CAN- » Future-oriented microprocessor technology
BUS which is immune to interference. By using the optional » Lit LCD display
controller complex PSC 100 control unit, DC systems can be » Windows-based SNT software tool for setting the output
built up on a low cost basis. In addition to the SMR power values
cabling only simple BUS wiring between the SMR’s and the » Low inrush current
PSC 100 is required to complete the DC system. » Short circuit proof
» CE- compliant
Easy Operation » ISO 9001 certified
The connections can be easily accessed from the front panel.
The lit LCD display of 2 x 16 characters show the output
voltage and output current, the device status and error
messages clearly.
 TYPE AC 7000 CAN 48 (60) V/125 (100) A 110 V/60 A 220 V/30 A
Part Number faced-out
D400 G48(60)/125(100)
BWrug-CFpüx
D400 G 110/60
BWrug-CFpüx
D400 G 220/30
BWrug-CFpüx

AC 7000 CAN E-Number

INPUT
3 000 001 101 3 000 000 533 3 000 000 534

SPECIFICATIONS
Nominal input voltage 3 x 400 V AC ± 15 % 3 x 400 V AC ± 10 %
Frequency 47 to 63 Hz
Current consumption (approx.
3 x 12 A AC
values)
Inrush current ≤ Rated input current
Required mains fuse gL 3 x 16 A or circuit breaker C-Characteristics
OUTPUT
G 48/125 G 60/100 G 110/60 G 220/30
Output Voltage 53.5 V DC ± 1 % 66.9 V DC ± 1 % 122.7 V DC ± 1 % 245.3 V DC ± 1 %
Setting Range 35 to 63.6 V DC 40 to 79.5 V DC 90 to 155 V DC 180 to 310 V DC
Output Current 125 A DC ± 2 % 100 A DC ± 2 % 60 A DC ± 2 % 30 A DC ± 2 %
Setting Range 6.3 to 125 A DC 5 to 100 A DC 3 to 60 A DC 1.5 to 30 A DC
Voltage ripple < 100 mV pp < 250 mV pp < 500 mV pp
Power factor 0,93 0,92
Efficiency (%) 91 92 91

AC7000 -EN-12-2013-V1 - Due to our policy of continuous development, data in this document is subject to change without notice and becomes contractual only after written confirmation.
≤5 % for sudden changes in load between 10 % - 90 % - 10 %
Dynamic response
Rated output current (Compensation time t < 1ms)
Short circuit response Short-circuit proof
Parallel operation max. 31 units, load distribution approx. 10 % if connected to CAN-BUS
Characteristic line IU Characteristic to DIN 41772 / DIN 41773
MONITORING AND INDICATION
Mains-Side Monitoring Under-voltage / Over-voltage: with switch-off, self acknowledging
Device OFF/ON OFF ≤325 V or ≥460 V / ON ≥350 V or ≤445 V
Output-side
DC under-voltage without switch-off, self acknowledging
Monitoring Systems
Message OFF/ON 48 V DC / 50 V DC 60 V DC / 62,5 V DC 110 V DC / 115 V DC 220 V DC / 230 V DC
DC over-voltage with switch-off and lock (software-controlled)
Device OFF/ON ≥ 56.5 V DC / ≤ 55 V DC ≥ 70.3 V DC / ≤ 68.3 V DC ≥ 130 V DC / ≤ 125 V DC ≥ 260 V DC / ≤ 250 V DC
DC over-voltage (hardware-controlled)
70 V DC 85 V DC 160 V DC 320 V DC
Alerts and Indicators UA and IA via LCD 2 x 16 characters, lit
Loading: LED green Fault: LED red
Fault message via floating relay contact; Display of the error memory
ON/OFF via external floating contact
MECHANICAL
Design 19“ module for installation in sub frame to DIN 41494
Ingress Protection IP 20
Mechanical Strength
to EN 50178 Section 9.4.3.2
and Vibration Resistance
Equipment Colour Colour RAL 7035 (Front panel)
Dimensions W x H x D (mm) 483 x 221.4 x 400 (19“ x 5 HE)
Weight approx. 30 kg
Mains connection Angle plug type GDME 313
DC-Output Threaded bolt M10

AEG is a registered trademark used under license from AB Electrolux.

Conductor Thread M6
Signals interface CombiCon type MSTB 2.5/3-STF-5.08 3-pole
ENVIRONMENTAL
Type of cooling Forced air cooling
Operating Temperature
0 °C to 40 °C, when installed in cabinet
Range
Storage temperature range -30 °C to 70 °C
Environment Conditions EN 60721 part 3 - 3, Class 3K3 / 3Z1 / 3B1 / 3C2 / 3S2 / 3M2
Installation height max 1,000 m above sea level, at nominal load
STANDARDS
Interference emission to EN 61000-6-4
Interference resistance to EN 61000-6-2
Low voltage function with
to EN 50178
safe disconnection
Approvals CE
Certificate ISO 9001

AEG Power Solutions GmbH

Emil-Siepmann-Str. 32
D-59581 Warstein-Belecke
Germany
Phone: +49 2902 763 143
Fax: +49 2902 763 1203
smr@aegps.com
www.aegps.com