Elcometer 130: Soluble Salt Profiler
Elcometer 130: Soluble Salt Profiler
Elcometer 130: Soluble Salt Profiler
Key Features
Elcometer 130
Soluble Salt Profiler
Multi-point conductivity
sensors for accurate display
of salt concentration
available with
compatible with
sales@elcometer.com elcometer.com 1
www.elcometer.com
Elcometer 130 SSP Soluble Salt Profiler
Automatic temperature
compensation ensures
accurate results
Multi-point conductivity
sensor allows the trend in
conductivity to be displayed
as a density map
USB
STANDARDS:
SSPC Guide 15, NSI 009-32
available with
Suitable for use in
Cloud Computing
2 YEAR*
WARRANTY
® compatible with
™
wireless technology ElcoMaster ®
Elcometer 130 SSP: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and
iPod touch (5th generation). “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
2
Key Features
Soluble Salt Profiler Elcometer 130 SSP
elcometer.com 3
Elcometer 130 SSP Soluble Salt Profiler
1. Wearing clean disposable gloves 2. Using tweezers, remove a filter 3. Disperse the water from the
(supplied), fill a syringe with precisely paper from the pack and place it on syringe, evenly across the whole
1.6ml of deionised water. the cleaned, non-labelled side of the of the filter paper and remove any
magnetic disc supplied. bubbles from under the paper.
4. Place the magnetic disc, with wetted 5. After two minutes, carefully remove 6. As each filter paper remains on the
paper face down on to the area under the filter paper and magnetic disc from surface for two minutes, multiple tests
test, pressing firmly into any contours the test surface and place on to the can be undertaken at the same time,
or irregularities and start the 2 minute measurement electrodes. reducing inspection times further.
timer on the gauge.
7. Close the lid, ensuring that the 8. The reading will be displayed on 9. Place the filter paper in a resealable
magnetic catch is fully engaged, the screen in the chosen display mode. bag (supplied), if required for further
gauge will begin measuring. analysis.
4
Key Features
Soluble Salt Profiler Elcometer 130 SSP
160
For equivalency to be established,
both gauges should read a similar 140
120
accuracy and resolution of each test.
100
TEST METHOD 80
elcometer.com 5
Elcometer 130 SSP Soluble Salt Profiler
Review
Review average,
maximum and
minimum readings
instantly.
Image Collection
PDF Use measurement
location points on
images to indicate the
position for the next
Email reading.
Cloud Combine
Combine different
inspection parameters
ElcoMaster® is a fast, easy to use Whether you are in the field or on the (such as salt
software solution for all your data factory floor, using the ElcoMaster® contamination, surface
management and quality assurance Mobile App users can; profile, climate, dry film
needs, preparing professional inspection • Store live readings directly on to a thickness) together
reports at the click of a button. mobile device and save them into with images, notes and
other project specific
batches information into reports.
Data transferred to ElcoMaster® includes: • View graphs in real-time whilst
• Date and time stamped readings carrying out the inspection Collaborate
• Statistical values • Add notes to individual batch reading Share inspection
• Limit values • Add photographs of the test surface data securely via the
• Readings above high limit Cloud and collaborate
to each individual batch reading at
• Run charts & histograms on projects using the
the click of a button instant messaging
• Salt profile maps • Plot individual readings on to a feature in ElcoMaster®.
• Batch and gauge information location map, photograph or diagram
• Calibration information via the mobile device’s internal GPS Send
Email inspection data
• Inspection data can be transferred
from a mobile device
from mobile to PC for further analysis to a PC for further
and reporting analysis and reporting
• Generate instant .pdf1 report for or transfer data via the
submission Cloud.
1
Available on iOS devices
6
Key Features
Soluble Salt Profiler Elcometer 130 SSP
Technical Specification
Model SSP
Repeatable & reproducible measurements ■
Easy to use menu structure; in 30+ languages ■
Tough, impact, waterproof & dust resistant; equivalent to IP64 ■
Bright colour screen; with permanent back light ■
Scratch & solvent resistant display; 2.4” (6cm) TFT ■
2 year gauge warranty* ■
USB power supply; via PC ■
Calibration certificate ■
Calibration verification mode (with optional certified calibration tile) ■
Ambient light sensor; with adjustable auto brightness ■
Emergency light mode ■
Magnetic & tripod mounting points ■
Data output, USB to PC & Bluetooth to PC, Android™ & iOSǂ devices ■
On screen statistics
Number of readings (n); Mean/Average, (x); - Standard deviation (σ);
Highest reading/Peak salt concentration (Hi;) Lowest reading (Lo); ■
Coefficient of variation (CV%); Number of readings above high limit ( n )
Gauge memory
Number of individual reading sets; including salt density, pass/fail map & distribution graph 3,500
Number of batches 1,000
Measurement units & range
Surface Cleanliness - Elcometer 130 Mode 0-50µg/cm² 0-500mg/m²
Surface Cleanliness - Bresle Equivalent Method Mode 0-15µg/cm² 0-150mg/m²
Conductivity 0-6000µS/cm 0-6mS/cm
0-3000ppm 0-0.3% Salinity
Resolution
Surface Cleanliness 0.1μg/cm² 1mg/m²
Conductivity 1µS/cm 0.001mS/cm
1ppm 0.0001% Salinity
Gauge Accuracy ±1% of reading
Measurement mode
Surface Cleanliness ■
Conductivity ■
Calibration offset mode ■
Automatic temperature compensation ■
ElcoMaster® software & USB cable ■
Individual reading and profile map stored with time and date ■
Plastic transit case ■
Alpha-numeric batch names; user definable on the gauge ■
Fixed batch size mode; with batch linking ■
Delete last reading ■
Limits; (gauge & batch specific) ■
Review, copy, clear & delete batches & calibration settings ■
Trend graph; last 20 readings ■
Batch review graph ■
Analogue bar graph ■
* The Elcometer 130 SSP is supplied with a one year warranty against manufacturing defects. Gauge warranty can be extended to two years via www.elcometer.com.
ǂ
Visit www.elcometer.com/sdk to find out how to integrate Elcometer’s MFi certified products to your App.
elcometer.com 7
Technical Specification C ENGLAND
Elcometer Limited
Model Description Certificate Manchester M43 6BU
Tel: +44 (0)161 371 6000
E130-SP Elcometer 130 Soluble Salt Profiler Fax: +44 (0)161 371 6010
E130-SPC Elcometer 130 Certified Soluble Salt Profiler ● sales@elcometer.com
www.elcometer.com
Operating Range 5°C - 40°C (41°F - 104°F)
4 x AA batteries or via USB BELGIUM
Power Supply Elcometer SA
(rechargeable batteries can also be used)
Tel: +32 (0)4 379 96 10
Alkaline: Approximately 30 hours Fax: +32 (0)4 374 06 03
Battery Life
Lithium: Approximately 45 hours be_info@elcometer.com
Sample Time 2 minutes www.elcometer.be
8
© Elcometer Limited, 2017. All rights reserved. No part of this document may be reproduced, transmitted, stored (in a retrieval system or otherwise), or translated into any language, in
any form, or by any means, without the prior written permission of Elcometer Limited.
V2: 30.01.2017