Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Materials of Construction: Models: LGF1E, LGB1E Lgf1Pe, Lgb1Pe

    Uploaded by

    Abdulrahman Al Huriby
    This document provides information on the standard materials of construction for models LGF1E, LGB1E, LGF1PE, and LGB1PE. It lists the materials used for parts like the cylinder, head, bearings, rotor, shaft, relief valve, seals, and connections. It also provides the operating limits for maximum differential pressure, maximum working pressure, and minimum temperature for the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Materials of Construction: Models: LGF1E, LGB1E Lgf1Pe, Lgb1Pe

    Uploaded by

    Abdulrahman Al Huriby
    34 views1 page
    This document provides information on the standard materials of construction for models LGF1E, LGB1E, LGF1PE, and LGB1PE. It lists the materials used for parts like the cylinder, head, bearings, rotor, shaft, relief valve, seals, and connections. It also provides the operating limits for maximum differential pressure, maximum working pressure, and minimum temperature for the models.

    Original Description:

    Pump

    Original Title

    501-091

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the standard materials of construction for models LGF1E, LGB1E, LGF1PE, and LGB1PE. It lists the materials used for parts like the cylinder, head, bearings, rotor, shaft, relief valve, seals, and connections. It also provides the operating limits for maximum differential pressure, maximum working pressure, and minimum temperature for the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views1 page

    Materials of Construction: Models: LGF1E, LGB1E Lgf1Pe, Lgb1Pe

    Uploaded by

    Abdulrahman Al Huriby
    This document provides information on the standard materials of construction for models LGF1E, LGB1E, LGF1PE, and LGB1PE. It lists the materials used for parts like the cylinder, head, bearings, rotor, shaft, relief valve, seals, and connections. It also provides the operating limits for maximum differential pressure, maximum working pressure, and minimum temperature for the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Page Number 501-091

    MATERIALS of CONSTRUCTION Effective Dec 2015

    Models: LGF1E, LGB1E Replaces Dec 2014

    LGF1PE, LGB1PE Section 501

    PART NAME STANDARD MATERIALS AVAILABLE OPTIONS


    Cylinder, Head Ductile Iron: ASTM A536
    Bearing Cover Cast Iron: ASTM A48
    Bearings Ball (Single Row), Grease Lubricated
    Bearing Locknut and Lockwasher Steel
    Rotor & Shaft Single End Keyed Shaft, 6-Vane Rotor
    Rotor Ductile Iron: ASTM A536
    Shaft High Strength Steel
    Relief Valve Nickel Plated Steel
    Relief Valve Cover Steel
    Relief Valve Spring Plated Steel
    Relief Valve Spring Setting
    105 psi (7.24 Bar) Differential Pressure
    LGF1E, LGB1E
    Adjustable 50-125 psi (3.45 - 8.62 bar)
    120 psi (8.27 Bar) Differential Pressure
    LGF1PE, LGB1PE
    Adjustable 50-125 psi (3.45 - 8.62 Bar)
    O-Rings: Other than Mechanical Seal Buna-N
    Gasket: Bearing Cover Fiber
    Vanes Duravane - Full Size, No Wear Plate
    Mechanical Seals
    Stationary O-Ring Buna-N
    Stationary Seat Hardened Steel
    Rotating O-Ring Buna-N
    Rotating Seal Face Carbon
    Seal Jacket Plated Steel
    Seal Spring Stainless Steel
    Coupling Guard Plastic

    CONNECTIONS
    Inlet and Outlet Ports 1” NPT Tapped
    Bypass Return Port 3/4” NPT Tapped
    Gage Ports 1/4” NPT

    OPERATING LIMITS
    Maximum Differential Pressure 125 psi (8.6 Bar)
    Maximum Working Pressure 350 psi (24.1 Bar) for LPG and NH3 Service. (Limited by U.L.)
    Minimum Temperature -25ºF (-31ºC)

    www.blackmer.com

    You might also like