Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    University of Karbala Collage of Engineering Biomedical Dept

    Uploaded by

    Mehdi Mohammed
    1. The experiment investigates flow rate using various flow measuring devices including a sudden enlargement, venturi meter, orifice plate, elbow, and rotameter. 2. Procedures involve positioning the flow apparatus and collecting readings from manometers and the rotameter at increasing head heights. Flow is also measured using a volumetric tank. 3. Questions address which device provides the best measurement, defining the coefficient of discharge and whether actual or theoretical flow is largest. Answers indicate the orifice provides the best measurement due to its minimum coefficient of discharge value, defines the coefficient of discharge, and explains theoretical flow is larger than actual due to friction losses.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    University of Karbala Collage of Engineering Biomedical Dept

    Uploaded by

    Mehdi Mohammed
    41 views7 pages
    1. The experiment investigates flow rate using various flow measuring devices including a sudden enlargement, venturi meter, orifice plate, elbow, and rotameter. 2. Procedures involve positioning the flow apparatus and collecting readings from manometers and the rotameter at increasing head heights. Flow is also measured using a volumetric tank. 3. Questions address which device provides the best measurement, defining the coefficient of discharge and whether actual or theoretical flow is largest. Answers indicate the orifice provides the best measurement due to its minimum coefficient of discharge value, defines the coefficient of discharge, and explains theoretical flow is larger than actual due to friction losses.

    Original Description:

    the flow meter discribtion

    Original Title

    Flow Meter

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The experiment investigates flow rate using various flow measuring devices including a sudden enlargement, venturi meter, orifice plate, elbow, and rotameter. 2. Procedures involve positioning the flow apparatus and collecting readings from manometers and the rotameter at increasing head heights. Flow is also measured using a volumetric tank. 3. Questions address which device provides the best measurement, defining the coefficient of discharge and whether actual or theoretical flow is largest. Answers indicate the orifice provides the best measurement due to its minimum coefficient of discharge value, defines the coefficient of discharge, and explains theoretical flow is larger than actual due to friction losses.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    41 views7 pages

    University of Karbala Collage of Engineering Biomedical Dept

    Uploaded by

    Mehdi Mohammed
    1. The experiment investigates flow rate using various flow measuring devices including a sudden enlargement, venturi meter, orifice plate, elbow, and rotameter. 2. Procedures involve positioning the flow apparatus and collecting readings from manometers and the rotameter at increasing head heights. Flow is also measured using a volumetric tank. 3. Questions address which device provides the best measurement, defining the coefficient of discharge and whether actual or theoretical flow is largest. Answers indicate the orifice provides the best measurement due to its minimum coefficient of discharge value, defines the coefficient of discharge, and explains theoretical flow is larger than actual due to friction losses.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 7

    University of karbala

    Collage of engineering
    Biomedical Dept.

    Name of group: Hadeel haider


    Ban haider
    Mustafa Nassir
    Sajjad husain
    Mahdi Mohamad
    Supervisor : Msc. Bassim mahmod

    Exp. Name : Flow meters apparatus


    Exp. Date : 2018 / 12/23
    Exp. Number : (5)
    Introduction:
    The flow measuring apparatus is used to familiarize the students with typical
    methods of flow
    measurement of an incompressible fluid and, at the same time demonstrate
    applications of the
    Bernoulli's equation.
    The flow is determined using a sudden enlargement, venturi meter, orifice
    plate, elbow and a
    rotameter. The pressure drop associated with each meter is measured directly
    from the
    manometers.
    Purpose:
    To investigate the flow rate using particular flow measuring apparatus
    Apparatus:
    Water flow measuring apparatus
    Procedures:
    1. Position the water flow measuring apparatus on the horizontal operating
    surface of the
    hydraulics bench using the locating pegs on the top surface of the bench.
    Connect the delivery
    hose from the bench to the inlet connection of the water flow measuring
    apparatus. Insert the
    overflow hose from the inlet tank into the overflow pipe of the volumetric
    measuring tank.
    2. Prepare the instruments such that the water passes sudden enlargement,
    then venturi meter,
    orifice plate, elbow, and finally rotameter .
    3. With the flow regulating valve of the bench closed, switch on the bench
    pump and allow water
    to be pumped into the apparatus by controlling the opening of the flow
    regulating valve until
    water just begins to flow into the equipment and just overflows through the
    air vent above the
    rotameter. Ensure that there are no air bubbles trapped in the manometer
    tubes, if necessary
    open the supply valve until water spills out of the top of the manometer tubes
    so that the water
    flushes out all air bubbles.
    4. Adjust the supply valve to obtain 6 or 7 readings with the height of water in
    the left hand
    manometer tube increasing in increments of approximately 50mm. The
    maximum flow which
    can be achieved for the experiment is when the height of water in the left
    hand manometer tube
    reaches the top of the manometer scale. At each steady state condition record
    the heights on
    each manometer tube and the flow shown on the rotameter. Also measure the
    flow using the
    volumetric flow tank of the hydraulics bench with a stop watch.
    calculations :
    Questions:
    1- What is the best measure for this instrument ? why ?
    2- Define Co-efficient of Discharge ? what is this range ?
    3- Which Q actual or Q theo. is largest ? why ?

    ans:
    1- orifice , because it has a minimum Cd value .
    2- is the ratio of the actual flow discharge to the
    theoretical flow discharge , it has no diemensions
    quantity and depends on the rate flow and the velocity
    its range from 0 – 1 .
    3- Qthe is greater than Q actual because the friction losses in the
    tube during the flowing of fluids

    You might also like