3D SERIES

centrifugal pumps Close Coupled and standardizeD EN 733

Centrifugal pumps close coupled (3D) and standardized EN 733 (3DS-3DP)

in cast iron.

APPLICATIONS
• Water and clean liquids not chemically aggressive handling
• Water supply
• Pressure boosting
• Washing and industrial plants
• Water circulation in air-conditioning systems
• Irrigation and agriculture

TECHNICAL DETAILS
• Highly resistant construction
• Impeller in stainless steel
• High efficiency

PUMP TECHNICAL DATA

• Maximum working pressure: 10 bar
• Temperature of the liquid:
-5°C ÷ +90°C
-5°C ÷ +110°C (H-HS-HW-HSW versions)
-5°C ÷ +120°C (E version)
• MEI > 0,4 for 3D(.) SERIES 2 poles, MEI > 0,1 for 3D(.) SERIES 4 poles
For further information please see our Data Book on the web site
www.ebaraeurope.com

MOTOR TECHNICAL DATA

• High efficiency IE2 motors starting from 0,75kW
High efficiency IE3 motors starting from7,5kW up to 22kW
• Self-ventilated 2 and 4 poles asynchronous motor
• Insulation class F (B for high temperatures)
• Protection degree IP 55
• 230V ±10% single phase voltage 50Hz,
230/400 ±10% (up to 4kW included) three phase 50Hz,

The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.
400/690V ±10% (from 5,5 kW and above) three phase 50Hz
• Protection is user’s responsibility

MATERIALS
• Pump casing in cast iron EN-GJL-250-EN 1561
Available in 3 different versions with 2 and 4 pole motors • Impeller in:
- AISI 304 for 3D(.) SERIES 32, 40, 50
- AISI 316 microcasted for 3D(.) SERIES 65
3D Monobloc with extended motor shaft • Shaft in AISI 304 (part in contact with the liquid)
• Mechanical seal in:
- Ceramic/Carbon/NBR (standard)
- Ceramic/Carbon/FPM (H version)
Monobloc with standard motor and - SiC/SiC/FPM (HS version)
3DS
rigid joint - Tungsten Carbide/Tungsten Carbide/FPM (HW version)
- SiC/Tungsten Carbide/FPM (HSW version)
- Ceramic/Carbon/EPDM (E version)

On base, with standard motor SPECIAL VERSIONS

3DP
and flexible coupling • Special voltages
• Special mechanical seals

Your Life, our Quality. Worldwide. 1 3D SERIES

 3D SERIES
centrifugal pumps Close Coupled and standardizeD EN 733

PERFORMANCE TABLE 3D(.) SERIES 32 2 Poles

Model P
2 Q=Flow rate
l/min 100 150 200 250 300 333 360 400 450
[HP] [kW] m3/h 6 9 12 15 18 20 21,6 24 27
H=Head [m]
3D(.)(.) 32-125/1.1 (M) 1,5 1,1 22,4 21,2 19,3 17,1 14,4 12,5 - - -
3D(.) 32-160/1.5 (M) 2 1,5 27,5 25,9 23,7 21,3 18,5 16,4 - - -
3D(.) 32-160/2.2 (M) 3 2,2 35,4 34,1 32,2 29,8 27,3 25,5 - - -
3D(.) 32-200/3.0 4 3 43,0 41,0 39,0 36,5 33,0 31,0 - - -
3D(.) 32-200/4.0 5,5 4 52,5 51,0 49,0 46,0 43,0 41,0 39,0 - -
3D(.) 32-200/7.5 10 7,5 67,0 65,0 63,0 61,0 57,0 55,0 53,0 50,0 46,0

PERFORMANCE TABLE 3D(.) SERIES 40 2 Poles

Model P
2 Q=Flow rate
l/min 200 250 300 350 400 450 500 600 700
[HP] [kW] m3/h 12 15 18 21 24 27 30 36 42
H=Head [m]
3D(.) 40-125/1.5 (M) 2 1,5 18,2 17,6 16,8 15,9 14,8 13,7 12,4 9,6 6,3
3D(.) 40-125/2.2 (M) 3 2,2 24,4 23,9 23,2 22,4 21,4 20,4 19,2 16,5 13,7
3D(.) 40-160/3.0 4 3 29,4 28,7 27,8 26,8 25,8 24,8 23,7 21,4 18,7
3D(.) 40-160/4.0 5,5 4 37,2 36,5 35,7 34,8 33,8 32,8 31,8 29,5 27,0
3D(.) 40-200/5.5 7,5 5,5 44,5 44,0 43,0 42,0 41,0 40,0 39,0 36,3 33,0
3D(.) 40-200/7.5 10 7,5 53,5 53,0 52,0 51,5 50,5 49,5 48,5 46,0 43,0
3D(.) 40-200/11 15 11 70,0 69,0 68,5 67,5 67,0 66,0 65,0 63,0 60,0

PERFORMANCE TABLE 3D(.) SERIES 50 2 Poles

Model P
2 Q=Flow rate
l/min 400 500 600 700 800 900 1000 1100 1200
[HP] [kW] m3/h 24 30 36 42 48 54 60 66 72
H=Head [m]
3D(.) 50-125/2.2 (M) 3 2,2 18,0 17,0 15,7 14,2 12,6 10,9 9,0 - -
3D(.) 50-125/3.0 4 3 21,5 20,8 19,8 18,5 17,1 15,5 13,8 12,0 10,0
3D(.) 50-125/4.0 5,5 4 25,8 25,3 24,5 23,5 22,2 20,7 19,0 17,2 15,3
3D(.) 50-160/5.5 7,5 5,5 32,0 31,5 30,5 29,3 27,9 26,2 24,4 22,4 20,0
3D(.) 50-160/7.5 10 7,5 38,2 37,6 36,9 35,8 34,5 32,9 30,9 28,9 26,7
3D(.) 50-200/9.2 12,5 9,2 - 49,5 48,0 46,5 44,5 42,5 40,0 37,6 34,4
3D(.) 50-200/11 15 11 - 55,5 54,5 52,5 51,0 49,0 47,0 44,5 42,0
3D(.) 50-200/15 20 15 - 69,5 68,5 67,0 65,5 63,5 61,5 59,0 56,0
The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.

PERFORMANCE TABLE 3D(.) SERIES 65 2 Poles

Model P
2 Q=Flow rate
l/min 600 700 1000 1300 1600 1900 2100 2200 2300
[HP] [kW] m3/h 36 42 60 78 96 114 126 132 138
H=Head [m]
3D(.) 65-125/4.0 5,5 4 20,4 19,8 17,2 14,0 10,4 6,0 - - -
3D(.) 65-125/5.5 7,5 5,5 - 25,0 22,5 19,4 15,5 11,0 8,0 - -
3D(.) 65-125/7.5 10 7,5 - 29,6 27,5 24,7 21,5 17,8 14,7 13,0 -
3D(.) 65-160/7.5 10 7,5 - 29,0 26,6 23,5 19,8 15,5 12,3 - -
3D(.) 65-160/9.2 12,5 9,2 - 34,7 32,4 29,6 26,3 22,2 18,8 17,0 -
3D(.) 65-160/11 15 11 - 39,0 37,0 34,0 31,0 27,0 23,0 22,0 20,0
3D(.) 65-160/15 20 15 - 46,0 44,0 41,5 38,4 34,6 31,9 30,5 29,0v
3D(.) 65-200/15 20 15 - 51,0 47,0 43,0 38,6 33,3 29,2 27,0 -
3D(.) 65-200/18.5 25 18,5 - 58,0 55,0 51,0 47,0 41,5 37,9 35,9 33,6
3D(.) 65-200/22 30 22 - 65,5 62,5 58,5 54,5 49,5 46,0 44,5 42,5
(M) Single phase version only for 3D SERIES

Your Life, our Quality. Worldwide. 4 3D SERIES

 3D SERIES
centrifugal pumps Close Coupled and standardizeD EN 733

DIMENSIONS 3D SERIES - up to 11kW 2 Poles

DIMENSIONAL TABLE

The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.
Model Dimensions [mm] Weight
DN1 P1 K1 D1 S1 DN2 P2 K2 D2 S2 H H1 H2 H3 R W M N1 N2 T E A A1 A2 B C V1 V2 [kg]
Ø Ø Ø Ø Ø Ø Ø Ø [2] [1] [2] [1] [*] [2] [1] [1] [2] [1] [2] [1] [*]
3D 32-125/1.1(M) 50 102 125 165 20 32 78 100 140 18 252 112 140 141 124 80 70 100 140 190 50 10 213 106,5 106,5 408 407 - 219÷230 219÷230 - M20x1,5 PG13,5 25,0 29,5 -
3D 32-160/1.5(M) 50 102 125 165 20 32 78 100 140 18 292 132 160 141 124 80 70 100 190 240 50 10 254 127 127 408 407 - 219÷230 219÷230 - M20x1,5 PG13,5 29,0 33,5 -
3D 32-160/2.2(M) 50 102 125 165 20 32 78 100 140 18 292 132 160 141 124 80 70 100 190 240 50 10 254 127 127 408 432 - 219÷230 244÷255 - M20x1,5 PG13,5 35,7 36,0 -
3D 32-200/3.0 50 102 125 165 20 32 78 100 140 18 340 160 180 - 124 80 70 100 190 240 50 10 296 148 148 - 471 - - 244÷255 - - PG13,5 - 47,5 -
3D 32-200/4.0 50 102 125 165 20 32 78 100 140 18 340 160 180 - 141 80 70 100 190 240 50 10 296 148 148 - 494 - - 253 - - PG16 - 50,0 -
3D 32-200/7.5 50 102 125 165 20 32 78 100 140 18 340 160 180 - 150 80 70 100 190 240 50 10 296 148 148 - 519 539 - 275 PG13,5 - PG16 - 62,0 65,1
3D 40-125/1.5(M) 65 122 145 185 20 40 88 110 150 18 252 112 140 141 124 80 70 100 160 210 50 10 220 108 112 408 407 - 219÷230 219÷230 - M20x1,5 PG13,5 25,5 30,0 -
3D 40-125/2.2(M) 65 122 145 185 20 40 88 110 150 18 252 112 140 141 124 80 70 100 160 210 50 10 220 108 112 408 432 - 219÷230 244÷255 - M20x1,5 PG13,5 31,7 32,0 -
3D 40-160/3.0 65 122 145 185 20 40 88 110 150 18 292 132 160 - 124 80 70 100 190 240 50 12 254 127 127 - 471 - - 244÷255 - - PG13,5 - 39,0 -
3D 40-160/4.0 65 122 145 185 20 40 88 110 150 18 292 132 160 - 141 80 70 100 190 240 50 12 254 127 127 - 494 - - 253 - - PG16 - 48,0 -
3D 40-200/5.5 65 122 145 185 20 40 88 110 150 18 340 160 180 - 150 100 70 100 212 265 50 12 296 148 148 - 539 - - 275 PG13,5 - PG16 - 60,0 -
3D 40-200/7.5 65 122 145 185 20 40 88 110 150 18 340 160 180 - 150 100 70 100 212 265 50 12 296 148 148 - 539 559 - 275 PG13,5 - PG16 - 63,0 66,1
3D 40-200/11 65 122 145 185 20 40 88 110 150 18 340 160 180 - 178 100 70 100 212 265 50 12 296 148 148 - 595 - - 359 PG13,5 - PG21 - 80,0 82,4
3D 50-125/2.2(M) 65 122 145 185 20 50 102 125 165 20 292 132 160 141 124 100 70 100 190 240 50 10 254 127 127 428 452 - 219÷230 244÷255 - M20x1,5 PG13,5 34,4 37,0 -
3D 50-125/3.0 65 122 145 185 20 50 102 125 165 20 292 132 160 - 124 100 70 100 190 240 50 10 254 127 127 - 491 - - 244÷255 - - PG13,5 - 39,5 -
3D 50-125/4.0 65 122 145 185 20 50 102 125 165 20 292 132 160 - 141 100 70 100 190 240 50 10 254 127 127 - 514 - - 253 - - PG16 - 48,0 -
3D 50-160/5.5 65 122 145 185 20 50 102 125 165 20 340 160 180 - 150 100 70 100 212 265 50 10 296 148 148 - 539 - - 275 PG13,5 - PG16 - 60,0 -
3D 50-160/7.5 65 122 145 185 20 50 102 125 165 20 340 160 180 - 150 100 70 100 212 265 50 10 296 148 148 - 539 559 - 275 PG13,5 - PG16 - 64,0 67,1
3D 50-200/9.2 65 122 145 185 20 50 102 125 165 20 360 160 200 - 178 100 70 100 212 265 50 10 296 148 148 - 595 - - 359 PG13,5 - PG21 - 77,0 77
3D 50-200/11 65 122 145 185 20 50 102 125 165 20 360 160 200 - 178 100 70 100 212 265 50 10 296 148 148 - 595 - - 359 PG13,5 - PG21 - 80,0 82,4
3D 65-125/4.0 80 138 160 200 22 65 122 145 185 20 340 160 180 - 141 100 95 125 212 280 65 12 263 127 136 - 514 - - 253 - - PG16 - 53,0 -
3D 65-125/5,5 80 138 160 200 22 65 122 145 185 20 340 160 180 - 150 100 95 125 212 280 65 12 263 127 136 - 539 - - 275 PG13,5 - PG16 - 65,0 -
3D 65-125/7,5 80 138 160 200 22 65 122 145 185 20 340 160 180 - 150 100 95 125 212 280 65 12 263 127 136 - 539 559 - 275 PG13,5 - PG16 - 69,5 72,6
3D 65-160/7,5 80 138 160 200 22 65 122 145 185 20 360 160 200 - 150 100 95 125 212 280 65 12 296 148 148 - 539 559 - 275 PG13,5 - PG16 - 70,0 73,1
3D 65-160/9,2 80 138 160 200 22 65 122 145 185 20 360 160 200 - 178 100 95 125 212 280 65 12 296 148 148 - 595 - - 359 PG13,5 - PG21 - 85,0 85
3D 65-160/11 80 138 160 200 22 65 122 145 185 20 360 160 200 - 178 100 95 125 212 280 65 12 296 148 148 - 595 - - 359 PG13,5 - PG21 - 85,0 87,4
[1]= Three phase only [2]= Single phase only [*]= IE3 motors only

Your Life, our Quality. Worldwide. 17 3D SERIES

 3D SERIES
centrifugal pumps Close Coupled and standardizeD EN 733

PERFORMANCE CURVES 3D(.) SERIES 32-160 at 2900 min

–1
(according to ISO 9906 Attachment A) 2 Poles
The contents of this publication must not be regarded as binding. EBARA Pumps Europe S.p.A. reserves the right to effect any modification it deems necessary, without prior notice.

Your Life, our Quality. Worldwide. 6 3D SERIES