DSR Vol. 2

Hkkjr ljdkj
GOVERNMENT OF INDIA
dsUnzh; yksd fuekZ.k foHkkx
CENTRAL PUBLIC WORKS DEPARTMENT
fnYyh nj vuqlwph
¼Hkkx - 2½
DELHI SCHEDULE OF RATES
(Vol. 2)
2018
egkfuns”kd] ds-yks-fu-fo-] ubZ fnYyh ds izkf/kdkj ds v/khu izdkf”kr

© All rights reserved. No part of this publication, either in English or in Hindi, may be reproduced in any form
or by any means, electronic or mechanical including photocopy, recording or any information storage and
retrieval system, without permission, in writing, from the Director General, CPWD, New Delhi.
DISCLAIMER
The rates taken in Delhi Schedule of Rates 2018 are indicative and actual rates shall be governed by the
market forces. Further its use by Govt. Departments, PSUs, private bodies & individuals shall be at their own
risk and discretion. CPWD shall not be responsible for any ambiguity, discrepancy, dispute or financial loss,
arising directly or indirectly by using or following items of DSR by such Govt./Private bodies or individuals.
For feed back and suggestions, please contact SE(TAS), CPWD, Room No. 418, ''A'' Wing, Nirman
Bhawan, New Delhi. Tel. No. 011-23062339, Email: delsetascsq.cpwd@nic.in
A GOVERNMENT OF INDIA PUBLICATION

Published by
DIRECTOR GENERAL
CPWD, Nirman Bhawan, New Delhi - 110011
&
Printed & Marketed by
JAIN BOOK AGENCY JAIN BOOK DEPOT

Authorised Dealers of Govt. Publications C - 4, Opp. PVR Plaza, Post Box. No. 51,
C-9, Connaught Place, New Delhi-110001 Connaught Place, New Delhi-110001 (India)
Phones : 44556677, 23416390 upto 94 Phone : 011- 23416101 / 02 / 03
E-mail : sales@jainbookagency.com E-mail : sales@jainbookdepot.com
Website : www.jainbookagency.com
JAIN BOOK AGENCY (SOUTHEND) JAIN BOOK AGENCY (GURGAON)

1, Aurobindo Place Market, 19, Central Plaza Mall, Sector 53,
Hauz Khas, New Delhi-110016 Golf Course Road,
Phone : 41755666 Gurgaon 122002 Haryana
E-mail : sales@jainbookagency.com Phone : 4042665
Website : www.jainbookagency.com Mobile : 9810666810
JAIN BOOK AGENCY (INTERNATIONAL) JAIN BOOK AGENCY (GREATER NOIDA)

RA- 11, Sector- 126, 11 Jagat farm Complex
Opp. Gate No. 2A of Amity University, Gama Sector Market
Noida Near OBC Bank
Mobile. : 9210080580 Greater Noida
Phone : 0120-4206655
Distributed by
JAIN BOOK AGENCY (CENTRAL)
4574/15, 2nd Floor, Padamchand Marg,
Near Happy School, Daryaganj, New Delhi-110002
Phone : 23203030
E-mail : sales@jba.in
Website : www.jba.in
Also available at
All Leading Booksellers & Authorised Govt. Dealers In India
Price : Rs. 1200/- (for both volumes) excluding postage and forwarding charges etc.
Hkkjr ljdkj dsUnzh; yksd fuekZ.k foHkkx
Government of India fuekZ.k Hkou] ubZ fnYyh 110011
Central Public Works Department
PRABHAKAR SINGH Nirman Bhawan, New Delhi- 110011
Director General Tel : 23062556 / 1317, Fax : 23061884
E-Mail : cpwd_dgw@nic.in
FOREWORD
Delhi Schedule of Rates, being published by Central Public Works
Department from time to time, is a comprehensive and useful Technical
Document in execution of Civil Construction Works. Apart from CPWD, this
Schedule of Rates is used as a guide by many Departments, Institutions,
Public Sector Undertakings, Architects, Builders and Contractors etc.
CPWD Schedule of Rates was first published in the year 1931, followed by a
number of revisions/publications from time to time in order to bring it in line
with the prevailing materials,technologies and market rates. Delhi Schedule of
Rates were revised and issued in subsequent years viz 1977,
1981, 1985, 1989, 1993, 1997, 2002, 2007, 2010 (Reprint), 2012, 2013, 2014
& 2016.
Last Delhi Schedule of Rates was published in the year 2016. Revision of this
DSR has become necessary due to change in wages of labour & price of
materials, adoption of new construction technologies & materials as well as
implementation of GST. These components have been incorporated in the
DSR 2018 by revising DSR 2016.
I wish to place on record the technical input and effective coordination on the
part of Shri A.S. Arora, ADG (S&P), Dr K M Soni ADG (TD), Shri Manu
Amitabh CE (CSQ) (Civil) and the efforts put in by Shri Divakar Agrawal SE
(TAS). Shri D.S.Panwar EE(TAS-I), Shri M L Prasad EE(TAS-II),
Shri D.S. Adhikari AE (QA), Shri Naveenkumar P JE (TAS) and team of officers
in CSQ unit in finalizing the DSR-2018 in a short time.
I am sure that Delhi Schedule of Rates 2018 will be quite useful to all
concerned Engineers & Architects in Building Construction Industry in general
and CPWD in particular.
Place: New Delhi (PRABHAKAR SINGH)

Date: December 14, 2018 Director General
PREFACE
1. DSR i.e. Delhi Schedule of Rates-2018 includes the existing items of DSR 2016 with deletion of
few items not in practice, merger of similar items and addition of new items in line with emerging
trends in construction Industry.
2. DSR-2018 is based on the prevailing market rates of materials in Delhi as on 01.10.2018. The
labour rates adopted are as per minimum wages applicable w.e.f 01.10.2018 issued by Govt. of
Delhi/ Govt. of India, whichever is higher.
3. The cost index for DSR 2018 is 118 with reference to CPWD Plinth Area Rates 2012, having
base 100 as on 01.10.2012.
4. The technical sanctioning authority may decide rates of non-schedule items judiciously
based on market rates without adding cost index.
5. This DSR - 2018 shall be read along with CPWD specifications 2009 Vol.-I & II with up to date
Correction Slips.
6. Following are the Salient Features of DSR- 2018:
6.1 DSR-2018 is bilingual and in two volumes.
6.1.1 The rates of basic materials incorporated in this DSR - 2018 are considered for the materials
available in the market conforming to BIS Standards/ CPWD Specifications.
6.1.2 The effect of GST on works contracts has been incorporated in all the items.
Salient Modifications and Changes in Sub Heads:
7.1 Earth work: Item No. 2.25(a) Excavating, supplying and filling of local earth by mechanical
transport up to a lead of 5km has been added.
7.2 Reinforced Cement Concrete: Item No. 5.22B & 5.22C Steel Reinforcement for R.C.C work
ready to use “Cut bend” rebars have been added. Nomenclature of item no.5.9 modified. Item
no.5.50 to 5.57 shifted to sub head 26 i.e. New Technologies & Materials (26.73 to 26.80).
7.3 Brick Work: Sub head 6- Brick work has been renamed as Masonry work.
IV
7.4 Marble & Granite work: Sub head 8- Marble & Granite work has been renamed as Cladding
work and all the cladding items have been shifted in this sub head from other Sub heads i.e. 7.0,
9.0, 11.0 & 25.0.
7.5 Wood and PVC Work: The amendments have been made in nomenclature of Item Nos. 9.138,
9.163 & 9.164.
7.6 Roofing: The amendments have been made in nomenclatures of item Nos. 12.8 to 12.10 and
12.12 to 12.13.
7.7 Finishing: Item No.13.48A for finishing walls with 100% Premium Acrylic Emulsion paint having
VOC less than 50gm/litre and UV resistance as IS: 15489:2004 has been added.
7.8 Road Work: The nomenclature of Item No.16.81‘Providing and erecting 2.00 metre temporary
barricading at site’ has been modified.
7.9 Water Supply: Items Nos. 18.4, 18.5, 18.6 & 18.6A for Polypropylene Random Copolymer
(PP-R-C) pipes have been added.
7.10 Structural Glazing Aluminum Panel: The nomenclature of item No. 25.3 has been modified.
7.11 Item No. 26.20 & 26.21 have been shifted to sub head 14.0
8.0 New Technologies and Materials
With a view to give boost to make in India initiative of the Government, new technology items have
been added in New Technologies and Materials sub Head. These new items are included for a
period of two years and then performance shall be reviewed. Following are the items added under
this sub head:
8.1 Bamboo mat corrugated sheet (BMCS),Bamboo mat ridge cap(BMRC),false ceiling of Phenol
Bamboo mat board, wall paneling with Phenol bonded Bamboo mat board (item no.26.6 a to e ).
8.2 EPS cement sandwich light weight solid core panels (item no.26.49).
8.3 Non Asbestos fibre reinforced aerated sandwich wall/roof/floor light weight solid core panels
(item no.26.50).
8.4 GFRG items (item no.26.51 to 26.61)
8.5 Speed floor system (Item no.26.62 to 26.64).
8.6 Factory made fast track modular system (Item no.26.65 to 26.66)
V
8.7 External thermal insulation in composite system (Item no.26.67)
8.8 Precast solid cement concrete blocks and paver blocks made of C & D waste (Item no.26.68 to
26.72)
8.9 Prefab/Precast technology (Item no.26.73 to 26.80)
8.10 Scaffolding net (Item no. 26.81)
9.0 Lot of efforts has gone into the preparation of this Delhi Schedule of Rates. I convey my
deep appreciation and sincere thanks to:
Shri Manu Amitabh CE, (CSQ) ; Shri Divakar Agrawal SE, (TAS) ; Shri Sudhir Kumar
Dak SE, (C&M) ; Shri D.S Panwar EE-(TAS-I) ; Shri M.L Prasad EE-(TAS-II) ;
Shri P. Goyal EE-(TAD) ; Shri A K Sikka EE, (QA) ; Shri M.C. Singal EE, (QA) ;
Shri S N Jaiswal EE, (HQ) ; Shri Shivani Kaushal EE, (M) ; Shri Sajal Mitra EE, (CON) ;
Shri Kunwar Chandresh EE, (TLC) ; Shri D.S. Adhikari AE, (QA) ; Shri D. K. Malhotra
AE, (TAS) ; Shri Patta Madhukumar AE, (TAS) ; Shri Prabhat Kumar Srivastav AE,
(TAS) ; Shri Gurmeet Singh AE, (TAD) ; Shri H. K. Gupta AE, (M) ; Shri Mohammad
Tarik AE, (QA) ; Shri S.K. Sharma AE, (QA) ; Shri Gopal Warshney AE, (QA) ;
Shri K R Meena AE, (CON) ; Shri Ved Khurana AE, (TLC) ; Shri Jai Bhagwan AE, (M) ;
Shri Chalapaka Ramaraju JE, (TAD) ; Shri Naveenkumar P. JE, (TAS); Shri Jay Prakash
Chief Estimator (TAS) ; Shri Bhim Singh Sr. D/man (TAS) ; Shri Sanjay Singh AD, (OL) and
his team for hindi translation of DSR- 2018, and other officers and staff of CSQ unit whose
names are not mentioned here, for their sincere efforts made in the preparation of this
document in such a short time. Various Committees and field units, who contributed field
inputs, also deserve appreciation for their timely help.
10.0 Although due care has been taken to print the DSR- 2018 as correctly as possible, there is
possibility that some errors might have crept in inadvertently. In case, any error or omission
is noticed, it may be brought to the notice of Superintending Engineer (TAS), CPWD,
Room no. 418, ‘ A’, Nirman Bhawan, New Delhi – 110011 (Tele fax. 011-23062339 ).
And suggestions for improvement are always welcome.
(Dr K M SONI)
ADG (TD) CPWD
Note: - In case of any discrepancy between English and Hindi versions, the English version shall
be held valid.
VI
C O N T E N T S
Vol. 1
SH. No. NAME OF SUB-HEAD PAGE No.
A. BASIC RATES
0.1 HIRE CHARGES OF PLANTS & MACHINERY 2
0.2 LABOUR 6
0.3 MATERIALS 8
0.4 CARRIAGE CODES 61
B. SUB -HEADS
1. Carriage of Materials 64
2. Earth Work 72
3. Mortar 80
4. Concrete Work 83
5. Reinforced Cement Concrete 90
6. Masonry Work 105
7. Stone Work 113
8. Cladding Work 120
9. Wood and PVC Work 130
10. Steel Work 179
11. Flooring 188
12. Roofing 203
VII
C O N T E N T S
Vol. 2
SH. No. NAME OF SUB-HEAD PAGE No.
13 Finishing 224
14 Repairs to Building 240
15 Dismantling and Demolishing 256
16 Road Work 264
17 Sanitary Installations 289
18 Water Supply 314
19 Drainage 357
20 Pile work 371
21 Aluminium Work 378
22 Water Proofing 385
23 Rain Water Harvesting & Tubewells 394
24 Conservation of Heritage Buildings. 400
25 Structural Glazing Aluminium Composite Panel 404
26 New Technologies and Materials 411
C. CEMENT CONSUMPTION STATEMENT 444
D. BITUMEN CONSUMPTION STATEMENT ......
Note: For Sub Heads 1 to 12 refer to Vol. 1
VIII
DELHI SCHEDULE OF RATES
(Vol. 2)
fnYyh nj vuqlwph
¼Hkkx - 2½
2018
SUB HEAD : 13.0
FINISHING
224
BASIC RATES (SH: 13.0 FINISHING)
Code Description Unit Rate

No.
0006 Hire charges of spraying machines including electric charges day 250.00
0101 Bhisti day 617.00
0112 Carpenter 2nd class day 679.00
0114 Beldar day 558.00
0115 Coolie day 558.00
0117 Assistant Fitter or 2nd class Fitter day 679.00
0122 Mason (for plaster of paris work) 1st class day 738.00
0123 Mason (brick layer) 1st class day 738.00
0131 Painter day 679.00
0141 White Washer day 617.00
0155 Mason (average) day 709.00
0156 Carpenter (average) day 709.00
0324 Coal Tar litre 30.00
0367 Portland Cement (OPC-43 Grade) tonne 4940.00
0368 White Cement tonne 11200.00
0763 Glue kg 75.00
0771 Kerosene oil litre 50.00
0772 White cement based polymer modified self curing compound in
powder form kg 15.00
0775 Dehradun white lime quintal 600.00
0776 Satna lime quintal 370.00
0777 Dry hydrated lime (factory made) quintal 290.00
0801 Silicon and acrylic emulsion litre 130.00
0802 Acrylic distemper 1st quality , having VOC content less than
50 grams/ litre Kg 36.00
0803 Acrylic emulsion, having VOC content less than 50 grams/ litre litre 94.00
0804 Premium acrylic emulsion of interior grade, having VOC content
less than 50 grams/ litre litre 220.00
0806 Ready mixed pink or grey primer on wood work (hard and soft wood)
having VOC content less than 50 grams/ litre litre 105.00
0808 Water thinnable cement primer for interior wall surface, having VOC
content less than 50 grams/ litre litre 50.00
0809 Exterior primer kg 140.00
0815 Dry distemper kg 30.00
0816 Ist quality Acrylic distemper(Ready mix) having VOC content less
than 50 grams/ litre kg 50.00
0818 Linseed oil (double boiled) litre 200.00
0820 Cement primer litre 80.00
SUB HEAD : 13.0 FINISHING 225

No.
0821 Distemper primer litre 70.00

0823 Pink primer (for wood) litre 105.00
0824 White cement based putty kg 13.00
0826 Aluminium paint litre 150.00
0827 Acid proof paint (chocolate or black) litre 225.00
0828 Anticorrosive bituminous paint (black) litre 100.00
0829 Black Japan paint litre 90.00
0830 Enamel paint litre 165.00
0831 Floor enamel paint in all shades except green litre 250.00
0833 Synthetic enamel paint in black or chocolate shade litre 170.00
0834 Synthetic enamel paint in all shades except black or chocolate shade litre 160.00
0835 Plastic acrylic emulsion paint litre 200.00
0836 100% Premium acrylic dirt resistance, Silicone additives exterior paint litre 270.00
0837 Acrylic Exterior Primer litre 100.00
0850 White lead kg 170.00
0851 Water proofing cement paint kg 38.00
0855 Wax polish (ready made) kg 230.00
0856 Ordinary varnish litre 100.00
0857 Superior copal varnish litre 115.00
0858 Superior spar varnish litre 115.00
0859 Oil type wood preservative litre 130.00
0868 Premixed super white gypsum plaster kg 6.00
0869 Plaster of Paris kg 5.00
0982 Coarse sand (zone III) cum 1350.00
0999 Shellac kg 300.00
1000 Spirit litre 48.00
1179 Crushed stone 2.36 mm to 12.5 mm size cum 900.00
1198 Second class kail wood in planks 10 cudm 260.00
1213 Water proofing materials kilogram 35.00
1216 Whiting quintal 600.00
1315 C.P. Brass chain with 40mm dia rubber plug each 40.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2209 Carriage of Cement tonne 92.24
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1150.00
4201 Aluminium primer litre 110.00
4202 Red oxide Zinc chromate primer litre 110.00
4203 Copper acetate kg 285.00

No.
4204 Hydrochloric acid kg 33.00
4205 Copper chloride kg 270.00
4206 Copper nitrate kg 210.00
4207 Ammonium chloride kg 20.00
7239 Epoxy paint litre 230.00
7240 Fire retardant paint litre 260.00
7241 Melamine Polish litre 280.00
7306 Aluminium T or L sections kg 190.00
8504 Multi surface paint litre 255.00
8505 Acrylic exterior paint litre 170.00
8506 Premium Acrylic exterior paint litre 180.00
8507 Textured exterior paint litre 240.00
8508 Primer for cement paint litre 79.00
8509 Special Primer (C.W.) litre 140.00
8510 Metal Primer (U.G.) litre 90.00
8733 Synthetic ployster triangular fibre of length 6 mm, effective
diameter 10-40 microns and specific gravity of 1.34 to 1.40 kg 400.00
9977 Carriage L.S. 2.00
9988 Carriage and sundries L.S. 2.00
9999 Sundries L.S. 2.00

13.0 FINISHING
No.
Note :- Rates for external plastic are for height upto 10m from
ground level in less otherwise stated.
CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
13.1.1 1:4 (1 cement: 4 fine sand) sqm 266.85
13.2 15 mm cement plaster on the rough side of single or half brick wall of
mix :
CEMENT PLASTER (IN COARSE SAND)
13.4.1 1:4 (1 cement: 4 coarse sand) sqm 276.15
13.5 15 mm cement plaster on rough side of single or half brick wall of
mix:
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT
13.7 12 mm cement plaster finished with a floating coat of neat cement of
mix :
13.8 15 mm cement plaster on rough side of single or half brick wall
finished with a floating coat of neat cement of mix :
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating
coat of neat cement.
13.9.1 12 mm cement plaster sqm 350.15
13.9.2 20 mm cement plaster sqm 460.70

No.
13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a

floating coat of neat cement on the rough side of single or half brick
wall. sqm 395.40
CEMENT PLASTER IN TWO COATS
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement
plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm
thick cement plaster 1:6 (1 cement : 6 fine sand). sqm 399.30
13.12 18 mm cement plaster in two coats under layer 12 mm thick cement
plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick
cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with
sponge. sqm 416.55
13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust). sqm 297.30
13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough
side of single or half brick wall. sqm 344.25
13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust). sqm 412.60
6MM CEMENT PLASTER
13.16.1 1:3 (1 cement : 3 fine sand) sqm 227.35
13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a
floating coat of neat cement and thick coat of Lime wash on top of
walls when dry for bearing of R.C.C. slabs and beams. sqm 301.65
13.18 Neat cement punning. sqm 62.75
ROUGH CAST PLASTER
13.19 Rough cast plaster upto 10 m height above ground level with a mixture
of sand and gravel or crushed stone from 6 mm to 10 mm nominal
size, dashed over and including the fresh plaster in two layers, under
layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top
layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with
10% finely grounded hydrated lime by volume of cement.
13.19.1 Ordinary cement finish using ordinary cement sqm 681.10
PEBBLE DASH PLASTER
13.20 Pebble dash plaster upto 10 m height above ground level with a
mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal
size, dashed over and including fresh plaster in two layers under
layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top
layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) mixed with 10% finely grounded hydrated lime by volume
of cement. sqm 638.95
13.21 Extra for providing and mixing water proofing material in cement per bag of
plaster work in proportion recommended by the manufacturers. 50kg cement
used in the
mix 59.75
13.22 Extra for plastering exterior walls of height more than 10 m from
ground level for every additional height of 3 m or part thereof. sqm 65.95

No.
13.23 Extra for plastering on circular work not exceeding 6 m in radius:

13.23.1 In one coat sqm 35.80
13.23.2 In two coats sqm 54.45
13.24 Extra for plastering done on moulding, cornices or architraves
including neat finish to line and level:
13.24.1 In one coat sqm 532.75
13.24.2 In two coats sqm 878.40
13.25 Extra for plastering:
13.25.1 Spherical ceiling sqm 133.60
13.25.2 Groined ceiling sqm 144.75
13.25.3 Flewing soffits sqm 88.35
13.26 Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete. sqm 196.70
ARTIFICIAL STONE PLASTER
13.27 Extra for lining out plaster to imitate stone or concrete blocks walling. sqm 85.25
PLAIN CEMENT MORTAR BANDS
13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1
cement : 4 fine sand):
13.28.1 Flush Band cm per metre 5.70
13.28.2 Sunk Band cm per metre 6.20
13.28.3 Raised Band cm per metre 7.10
13.28.4 Moulded Band cm per metre 12.15
13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1
13.29.1 Flush Band cm per metre 6.90
13.29.2 Sunk Band cm per metre 7.60
13.29.3 Raised Band cm per metre 8.70
13.29.4 Moulded Band cm per metre 16.25
13.30 18 mm thick moulded cement mortar band in two coats under layer
12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top
layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand). cm per metre 16.20
POINTING ON BRICK WORK
13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1
13.31.1 Flush / Ruled/ Struck or weathered pointing sqm 191.55
13.31.2 Raised and cut pointing sqm 313.80
POINTING ON TILE BRICK WORK
13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine
sand):
13.32.1 Flush/ Ruled/ Struck or weathered pointing sqm 260.90

No.
POINTING ON STONE WORK

13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine
sand) :
13.33.1 Flush/ Ruled pointing sqm 285.40
13.33.2 Raised and cut pointing sqm 520.75
13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1
white cement : 3 marble dust). sqm 538.25
13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2
fine sand):
13.35.1 Flush/ Ruled pointing sqm 159.00
13.36 Extra for pointing on walls on the outside at height more than 10 m
from ground level for every additional height of 3 m or part there of. sqm 7.15
INTERIOR FINISHING
13.37 White washing with lime to give an even shade :
13.37.1 New work (three or more coats) sqm 28.55
13.38 Satna lime wash on walls with one coat. sqm 11.50
13.39 Colour washing such as green, blue or buff to give an even shade :
13.39.1 New work (two or more coats) with a base coat of white
washing with lime sqm 38.95
13.39.2 New work (two or more coats) with a base coat of whiting sqm 38.50
13.40 Distempering with dry distemper of approved brand and manufacture
(two or more coats) of required shade on new work, over and including
water thinnable priming coat to give an even shade. sqm 117.75
13.41 Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer sqm 153.45
13.42 Distempering with 1st quality acrylic distemper (ready mixed)
having VOC content less than 50 gms/litre, of approved
manufacturer, of required shade and colour complete, as per
manufacturer’s specification.
13.42.1 Two or more coats on new work sqm 87.15
13.43 Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
13.43.1 Water thinnable cement primer sqm 60.00
EXTERIOR FINISHING
13.44 Finishing walls with water proofing cement paint of required shade :
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 91.25
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm sqm 232.00

No.
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm
@ 2.20 kg/10 sqm) sqm 164.70
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm
@ 2.20 kg/10 sqm) sqm 161.15
13.48 Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm
over and including one coat of Special primer applied @
0.75 ltr /10 sqm sqm 142.20
13.48.2 Painting wood work with Deluxe Multi Surface Paint of
required shade. Two or more coat applied @ 0.90 ltr/10
sqm over an under coat of primer applied @0.75 ltr/10
sqm of approved brand and manufacture sqm 130.25
13.48.3 Painting Steel work with Deluxe Multi Surface Paint to
give an even shade. Two or more coat applied @ 0.90 ltr/
10 sqm over an under coat of primer applied @ 0.80 ltr/
10 sqm of approved brand and manufacture sqm 125.80
13.48A Finishing walls with 100% Premium acrylic emulsion paint having
VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,
Alkali & fungal resistance, dirt resistance exterior paint of
required shade (Company Depot Tinted) with silicon additives.
13.48A.1 New work (Two or more coats applied @ 1.43 litre/
10 sqm. Over and including priming coat of exterior
primer applied @ 0.90 litre/10 sqm. sqm 146.20
13.50 Applying priming coat:
13.50.1 With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood) sqm 57.05
13.50.2 With ready mixed aluminium primer of approved brand
and manufacture on resinous wood and plywood sqm 57.55
13.50.3 With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works sqm 50.70
13.50.4 With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel work (second
coat) sqm 27.20
13.51 Painting with silicon & acrylic emulsion based water thinnable sealer
of approved brand and manufacture on wet or patchy portion of
plastered surfaces :
13.51.1 One coat sqm 81.20
13.51.2 Two coats sqm 129.05

No.
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared
and applied as per manufacturer’s specifications including appropriate
priming coat, preparation of surface, etc. complete.
13.52.1 On steel work sqm 189.75
13.52.2 On concrete work sqm 189.40
13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand
and manufacture of required colour to give an even shade :
13.53.1 New work (two or more coats) including a coat of approved
steel primer but excluding a coat of mordant solution sqm 138.00
13.54 Applying a coat of mordant solution on G.S. sheet:
13.54.1 With a solution of 38 gms of copper acetate in a litre of
soft water sqm 48.25
13.54.2 With a solution made of 13 gms of hydrochloric acid in a
solution of 13 gms each of copper chloride, copper nitrate
and ammonium chloride dissolved in a litre of soft water sqm 48.05
13.55 Painting (two or more coats) on rain water, soil waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture, over and including a priming of ready mixed zinc
chromate yellow primer on new work:
13.55.1 100 mm diameter pipes metre 58.15
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour over a priming coat of approved
steel primer on new work.
13.57 Painting with oil type wood preservative of approved brand and
manufacture :
13.57.1 New work (two or more coats) sqm 44.50
13.58 Providing and applying two coats of fire retardant paint on cleaned
wood / ply surface @ 3.5 sqm per litre per coat including preparation
of base surface as per recommendations of manufacturer to make
the surface fire retardant. sqm 292.00
13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre
coal tar per sqm in the first coat and second coat respectively. sqm 50.30
13.60 Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
13.61 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :

No.

manufacture of required colour to give an even shade :
13.62.1 Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and
manufacture sqm 177.15
13.63 Painting with aluminium paint of approved brand and manufacture to
give an even shade .
13.64 Painting with acid proof paint of approved brand and manufacture of
required colour to give an even shade :
13.65 Painting with black anti-corrosive bitumastic paint of approved brand
13.66 Floor painting with floor enamel paint of approved brand and
13.67 Varnishing with varnish of approved brand and manufacture :
13.67.1 Two or more coats of glue sizing with copal varnish over
an under coat of flatting varnish sqm 182.40
13.67.2 Two or more coats glue sizing with spar varnish or an
under coat of flatting varnish sqm 183.25
13.68 French spirit polishing :
13.68.1 Two or more coats on new works including a coat of
wood filler sqm 351.15
13.69 Polishing on wood work with ready mixed wax polish of approved
brand and manufacture :
13.69.1 New work sqm 150.90
13.70 Floor polishing on masonry or concrete floors with wax polish of
approved brand and manufacture. sqm 72.85
13.71 Lettering with black Japan paint of approved brand and manufacture per letter
per cm height 4.70
13.72 Washed stone grit plaster on exterior walls height upto 10 metre
above ground level, in two layers, under layer 12 mm cement plaster
1:4 (1 cement : 4 coarse sand ), furrowing the under layer with
scratching tool, applying cement slurry on the under layer @ 2 Kg of
cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2
(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size),
in panels with groove all around as per approved pattern, including
scrubbing and washing the top layer with brushes and water to expose
the stone chippings ,complete as per specification and direction of
Engineer-in-charge (payment for providing grooves shall be made
separately). sqm 896.75

No.
13.73 Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the
under layer, including removal of wooden battens, repair to the edges
of panels and finishing the groove complete as per specifications
and direction of the Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove metre 57.15
13.73.2 20 mm wide and 15 mm deep groove metre 57.75
13.74 Extra for washed grit plaster on exterior walls of height more than
10 m from ground level for every additional height of 3 m or part
thereof. sqm 129.65
13.75 Extra for washed stone grit plaster on circular work not exceeding
6 m in radius (in two coats). sqm 101.10
13.76 Forming groove of uniform size from 12x12 mm and upto 25x15 mm
in the top layer of washed stone grit plastered surface as per approved
pattern, including providing and fixing aluminum channels of
appropriate size and thickness (not less than 2 mm), nailed to the
under layer with rust proof screws and nails and finishing the groove
complete as per specifications and direction of the Engineer-in-
Charge. metre 86.75
13.77 Extra for using white cement in place of ordinary cement in the top
layer of the item of washed stone grit plaster. sqm 83.75
13.78 Providing and applying 12 mm thick (average) premixed formulated
one coat gypsum lightweight plaster having additives and light weight
aggregates as vermiculite/ perlite respectively conforming to IS: 2547
(Part - 1 & II) 1976, applied on hacked / uneven background such as
bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete. sqm 342.85
13.79 Extra for addition of synthetic Polyester triangular fibre of length 6
mm, effective diameter 10-40 microns and specific gravity of 1.34 to
1.40 in cement plaster/mortar by using 125 gms. of synthetic per bag of
Polyester triangular fibre for 50 Kgs. cement used in cement mortar 50kg of
as per directions of Engineer-in-Charge. cement 66.90
13.80 Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete. sqm 115.15
13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre, of approved
brand and manufacture, including applying additional coats wherever
required, to achieve even shade and colour.
13.81.1 One coat sqm 50.60
13.81.2 Two coats sqm 81.90

No.
13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required,
to achieve even shade and colour.
13.82.1 One coat sqm 71.80
13.82.2 Two coats sqm 106.80
13.83 Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50
grams/ litre of approved brand and manufacture, including applying
additional coats wherever required to achieve even shade and colour.
13.83.1 One coat sqm 75.10
13.83.2 Two coats sqm 113.90
13.84 DELETED
13.84.1 DELETED
13.84.2 DELETED
13.85 Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound ) content.
13.85.1 With ready mixed pink or grey primer on wood work
(hard and soft wood) having VOC content less than 50
grams/ litre sqm 57.05
13.85.2 DELETED
13.85.3 With water thinnable cement primer on wall surface
having VOC content less than 50 grams/litre sqm 60.00
13.86 6 mm plaster on cement concrete or reinforced cement concrete
work with white cement based polymer modified self curing mortar of
approved make as per the direction of Engineer-In-Charge. sqm 205.50
13.87 White washing with lime to give an even shade :
13.87.1 Old work (two or more coats) sqm 16.75
13.87.2 Old work (one or more coats) sqm 10.25
13.88 Removing white or colour wash by scrapping and sand papering and
preparing the surface smooth including necessary repairs to scratches
etc. complete sqm 14.20
13.89 Distempering with dry distemper of approved brand and manufacture
(one or more coats) and of required shade on old work to give an
even shade. sqm 49.55
13.90 Distempering with 1st quality acrylic distember (Ready mix)
having VOC content less than 50 grams/ litre of approved brand
13.91 Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete. sqm 18.25

No.
13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand
and manufacture of required colour to give an even shade :
13.93 Painting (two or more coats) on rain water, soil, waste and vent
pipes and fittings with black anticorrosive bitumastic paint of approved
brand and manufacture over and including a priming coat of ready
mixed zinc chromate yellow primer on new work :
13.94 Painting (one or more coats) on rain water, soil waste and vent pipes
and fittings with black anticorrosive bitumastic paint of approved brand
and manufacture on old work :
and fittings with aluminium paint of approved brand and manufacture
over a priming coat of ready mixed zinc chromate yellow primer on
new work :
13.96 Painting (one or more coats) on rain water, soil waste and vent pipes
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour on old work :
13.97 Painting with oil type wood preservative of approved brand and
manufacture:
13.98 Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade:
13.98.1 One or more coats on old work sqm 84.65
13.100 Painting with aluminium paint of approved brand and manufacture to
give an even shade:

No.
13.101 Painting with acid proof paint of approved brand and manufacture of
required colour to give an even shade :
13.102 Painting with black anti-corrosive bitumastic paint of approved brand
13.103 French spirit polishing :
13.104 Polishing on wood work with ready made wax polish of approved
brand and manufacture :
13.104.1 Old work sqm 76.30
13.105 Re-lettering with black Japan paint of approved brand and manufacture. per letter
per cm
height 3.00
13.106 Painting (one or more coats) with black Japan paint of approved
brand and manufacture to give an even shade. sqm 72.45
13.107 Providing and fixing C.P. brass chain and rubber plug complete for
sink or wash basin:
13.107.1 32 mm dia each 75.10
13.107.2 40 mm dia each 75.10
13.108 Distempering with 1st quality acrylic distemper (ready made) having
VOC content less than 50 gm per ltr. of approved manufacturer
and of required shade and colour complete. as per manufacturer’s
specification.
13.109 Finishing walls with water proofing cement paint of required shade :
13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm)
over priming coat of primer applied @ 0.80 litrs/10 sqm
complete including cost of Priming coat. sqm 87.20
13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm)
complete. sqm 59.35
13.110 Finishing walls with textured exterior paint of required shade :
13.110.1 Old work (Two or more coats on existing cement paint
surface applied @ 3.28 ltr/10 sqm. sqm 168.75
13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm 105.30
13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)
on existing cement paint surface sqm 99.90
13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 67.35

No.
13.112 Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade
13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface sqm 97.75
13.112.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 66.95
13.113 Varnishing with varnish of approved brand and manufacture:
13.113.1 One or more coats with copal varnish sqm 73.40
13.113.2 One or more coats with spar varnish sqm 73.85
13.114 Melamine polishing on wood work (one or more coat). sqm 110.75
13.115 Varnishing with flatting varnish of approved brand and manufacture
one or more coats on old work. sqm 76.65
Note: Item no 13.87 to 13.115 are brought from Sub Head 14
i.e. Repairs to Building Item no 14.42 to 14.71

SUB HEAD : 14.0
REPAIRS TO BUILDING
240
BASIC RATES (SH: 14.0 REPAIRS TO BUILDING)

No.
0006 Hire charges of Spraying machine including electric charges day 250.00
0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0058 Air compressor hour 200.00
0085 Using cost of Ultra Violet Radiation tube Hour 189.00
0086 Compressor, gun, rubber pipes & other accessories- hire charge
of plant & machinery i/c necessary fuel day 4000.00
0087 Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL
and operator day 36000.00
0100 Bandhani day 617.00
0102 Blacksmith 1st class day 738.00
0103 Blacksmith 2nd class day 679.00
0111 Carpenter 1st class day 738.00
0116 Fitter (grade 1) day 738.00
0119 Glazier day 679.00
0124 Mason (brick layer) 2nd class day 679.00
0126 Mason (for ornamental stone work) 1st class day 738.00
0128 Mate day 617.00
0129 Sewer man day 558.00
0130 Mistry day 738.00
0138 Sprayer (for bitumen, tar etc.) day 617.00
0139 Skilled Beldar (for floor rubbing etc.) day 617.00
0159 Skilled torch operator for laying tack day 738.00
0160 Technician day 775.00
0164 Security guard without gun (8 hours shift duty per day) day 617.00
0165 Security guard with gun (8 hours shift duty per day) day 679.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1350.00
0302 Safeda ballies 125 mm diameter metre 40.00
0308 Bhusa quintal 500.00
SUB HEAD : 14.0 REPAIRS TO BUILDING 241

No.
0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 34000.00
0316 Bitumen solution primer of approved quality litre 45.00
0370 Coal (stream) quintal 440.00
0389 Brass single acting spring hinges 150 mm each 425.00
0392 Brass double acting spring hinges 150 mm each 480.00
0404 Brass flush bolt 250 mm each 150.00
0417 Brass 150 mm floor door stopper weighing not less than
0.357kg each 160.00
0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 600.00
0423 Brass casement window fastener each 45.00
0427 Brass quadrant stays 300 mm each 110.00
0428 Brass fanlight catch 10 Nos 170.00
0429 Brass fanlight pivot 10 Nos 168.00
0430 Brass chain with hook for fan light catch each 36.00
0442 Brass helical spring 150 mm each 290.00
0444 Brass curtain rod 20 mm dia 1.25 mm thick metre 140.00
0445 Brass curtain rod 25 mm dia 1.25 mm thick metre 190.00
0446 Brass brackets (curtain rods) 20 mm each 45.00
0449 Brass screws 50 mm 100 Nos 220.00
0524 Chromium plated Brass butt hinges (heavy) type 75x65x
4 mm weighing not less than 200gms 10 Nos 905.00
0525 Chromium plated Brass butt hinges (light/ordinary) type
125x70x4mm 10 Nos 805.00
100x70x4 mm 10 Nos 690.00
75x40x2.5 mm 10 Nos 421.00
50x40x2.5 mm 10 Nos 180.00

No.
0585 Chromium plated Brass screws 50 mm 100 Nos 300.00

0595 Bright finished or black enameled mild steel butt hinges
100x58x 1.90 mm 10 Nos 80.00
0597 Bright finished or black enameled mild steel butt hinges
50x37x 1.50 mm 10 Nos 49.00
0608 Nickel plated bright finished mild steel piano hinges 1 mm thick
25 mm wide metre 39.00
0637 Bright finished or black enameled mild steel screws 40 mm 100 Nos 60.00
0761 Fuel wood quintal 500.00
0772 White cement based polymer modified self curing compound
in powder form kg 15.00
0775 Dehradun white lime quintal 600.00
0811 Mud (dry) cum 165.00
0815 Dry distemper kg 30.00
0816 Ist quality Acrylic distemper(Ready mix) having VOC content
less than 50 grams/ litre kg 50.00
0826 Aluminium paint litre 150.00
0827 Acid proof paint (chocolate or black) litre 225.00
0829 Black Japan paint litre 90.00
0833 Synthetic enamel paint in black or chocolate shade litre 170.00
0835 Plastic acrylic emulsion paint litre 200.00
0845 Roofing paint for iron sheets in red colour litre 120.00
0851 Water proofing cement paint kg 38.00
0855 Wax polish (ready made) kg 230.00
0856 Ordinary varnish litre 100.00
0857 Superior copal varnish litre 115.00
0858 Superior spar varnish litre 115.00
0859 Oil type wood preservative litre 130.00
0863 Putty for wood work kg 30.00
0999 Shellac kg 300.00
1000 Spirit litre 48.00

No.
1003 Mild steel round bar above 12 mm dia quintal 4400.00
1007 Structural steel such as tees, angles channels and R.S. joists quintal 4600.00
1008 Flats up to 10 mm in thickness quintal 4500.00
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 120.00
1034 Bolts and nuts up to 300 mm in length quintal 4800.00
1174 Red sand stone slab 45 mm to 50 mm thick (un-dressed) sqm 225.00
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar
in planks 10 cudm 1100.00
1188 First class teak wood in planks 10 cudm 850.00
1189 Second class teak wood in scantling 10 cudm 776.00
1190 Second class teak wood in planks 10 cudm 791.00
1194 Second class deodar wood in planks 10 cudm 500.00
1196 First class kail wood in planks 10 cudm 300.00
1199 Sal wood in scantling 10 cudm 600.00
1208 Bitumen washer 100 Nos 30.00
1209 G.I. plain washer thick 100 Nos 35.00
1215 Welding by electric plant cm 2.00
1241 Commercial LPG in Cylinder kg 82.00
1301 Bleaching powder quintal 1800.00
1314 C.P.brass chain with 32 mm dia rubber plug each 40.00
1880 Dismenteled P or S trap scrap (approx wt 2kg) kg 22.00
1890 Centrifugally SCI(spun) S & S P or S trap each 300.00
1953 Vitreous china Indian type W.C. pan of size 580 mm each 450.00
1954 Vitreous china orrisa type W.C. pan of size 580 mm each 1200.00
1970 Vitreous china foot rests 250x125x25 mm pair 100.00
2200 Carriage of steam coal tonne 120.00
2201 Carriage of Bricks 1000 Nos 276.72
2204 Carriage of Timber cum 118.59
2205 Carriage of Steel tonne 92.24
2211 Carriage of Tar/ Bitumen tonne 103.77
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 92.24
2264 Carriage of Rubbish cum 103.77
2406 Float glass panes of nominal thickness 4 mm (weight not less
than 10 kg/sqm) sqm 300.00
than 12.50 kg/sqm) sqm 500.00

No.
2466 Hollock wood in scantling 10 cudm 350.00

2467 Chromium plated Brass pull bolt lock (locking bolt) of size
85 mm x 42 mm with screws, bolts, nuts and washers complete each 165.00
2602 Common burnt clay F.P.S. (non modular) bricks class designation 1000 Nos 4500.00
4009 Mild steel tubes hot finished welded type kg 57.00
4203 Copper acetate kg 285.00
7019 Dash fastener / Chemical fastener each 14.00
7241 Melamine polish litre 280.00
7346 Double coupler each 46.00
7387 Spigot for standard jointing kg 43.00
7397 Base Jack each 145.00
7398 Challies each 765.00
7399 Cup locks each 48.00
7442 Wheel 75 mm dia. 40 mm wide each 62.00
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 840.00
8200 A.P.P. modified polymeric felt (two layers) 1.5mm thick sqm 80.00
8201 A.P.P. modified polymeric felt (two layers) 2mm thick sqm 100.00
8203 A.P.P. modified 2 mm thick membrane reinforced with glass fibre malt sqm 126.67
8204 A.P.P. modified 3 mm thick membrane reinforced with glass fible matt sqm 190.00
8205 A.P.P. modified 3 mm thick membrane with polyester matt sqm 205.00
8206 Bitumen primer for bitumen membrane litre 80.00
8207 Geotextile 120 grams per sqm membrane sqm 45.00
8500 Water for jetting / blowback 1000 litre 1500.00
8505 Acrylic exterior paint litre 170.00
8506 Premium Acrylic exterior paint litre 180.00
8507 Textured exterior paint litre 240.00
8508 Primer for cement paint litre 79.00

14.0 REPAIRS TO BUILDING
No.
14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area
2.5 sq.meters and under, including cutting the patch in proper shape,
raking out joints and preparing and plastering the surface of the walls
complete, including disposal of rubbish to the dumping ground, all
complete as per direction of Engineer-in-Charge.
14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 417.80
14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 429.60
14.2 Fixing chowkhats in existing opening including embedding chowkhats
in floors or walls cutting masonry for holdfasts, embedding hold fasts
in cement concrete blocks of size 15 x 10 x 10 cm with cement
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate
20 mm nominal size), painting two coats of approved wood preservative
to sides of chowkhats and making good the damages to walls and
floors as required complete, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-in-Charge.
14.2.1 Door chowkhats each 1366.85
14.2.2 Window chowkhats each 858.90
14.2.3 Clerestory window chowkhats each 637.85
14.3 Fixing chowkhat in existing opening in brick/ RCC wall with dash
fasteners/Chemical fasteners of appropriate size (3 nos on each
vertical member of door chowkhat and 2 nos on each vertical member
of window chowkhats), including Cost of dash fasteners/ chemical
fastener. each 193.95
14.4 Making the opening in brick masonry including dismantling in floor
or walls by cutting masonry and making good the damages to walls,
flooring and jambs complete, to match existing surface i/c disposal
of mulba/ rubbish to the nearest municipal dumping ground, all
complete as per direction of Engineer-in-Charge.
14.4.1 For door/ window/ clerestory window sqm 932.45
14.5 Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:
14.5.1 Float glass panes of nominal thickness 4 mm (weight
not less than 10kg/sqm) sqm 890.50
not less than 12.5kg/sqm) sqm 1184.85
14.6 Renewing glass panes, with wooden fillets wherever necessary:
14.7 Renewing glass panes and refixing existing wooden fillets:

No.
14.8 Supplying and fixing new wooden fillets wherever necessary:

14.8.1 2nd class teak wood fillets metre 61.50
14.8.2 Hollock wood fillets metre 54.70
14.9 Renewal of old putty of glass panes (length) metre 42.60
14.10 Refixing old glass panes with putty and nails sqm 554.05
14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets) sqm 510.75
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and
size in existing R.C.C. slab, including cutting chase, anchoring clamp
to reinforcement bar, including cleaning, refilling, making good the
chase with matching concrete, plastering and painting the exposed
portion of the clamps complete. each 425.10
14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement
mortar by dismantling tiles or bricks, removing mud plaster, preparing
the surface of mud phaska to proper slope, relaying mud plaster gobri
leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3
fine sand), including replacing unserviceable tiles or bricks with new
ones and disposal of unserviceable material to the dumping
ground (the cost of the new tiles or brick excluded), all complete as
per direction of Engineer-in-Charge. sqm 521.60
14.14 Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1
cement : 4 coarse sand), including necessary repairs and cement
pointing with same mortar complete, including disposal of rubbish to
14.14.1 Red/ white sand stone slabs 30 to 50 mm thick sqm 957.70
14.15 Renewing wooden battens in roofs, including making good the holes
in wall and painting with oil type wood preservative of approved brand
and manufacture complete, including removal of rubbish to the
14.15.1 Sal wood battens cum 91114.45
14.16 Renewing wooden beams in roofs including making good the holes
in walls and painting with oil type wood preservative of approved
brand and manufacture complete, including removal of rubbish to the
14.16.1 Not exceeding 4.00 metres in length.
14.16.1.1 Sal wood beams cum 95325.80
14.16.1.2 Hollock wood beams cum 60859.95
14.16.2 Above 4.00 metres and upto 5.00 metres length.
14.16.2.1 Sal wood beams cum 97267.00
14.16.2.2 Hollock wood beams cum 62765.35
14.17 Raking out joints in lime or cement mortar and preparing the surface
for re-pointing or replastering, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-in-Charge. sqm 51.70

No.
14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% of integral water proofing compound by weight of cement for
flat tile bricks on top of mud phaska :
14.18.1 With F.P.S. brick tiles sqm 103.45
14.18.2 With modular brick tiles sqm 104.65
14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts
etc. and removing materials to any distance within compound and
stacking. kg 4.00
14.20 Fixing of old wind tie with new fittings including painting two or more
coats with anticorrosive bitumastic paint of approved brand &
manufacturer over and including priming coat of ready mixed zinc
chromate yellow primer of approved brand. metre 102.60
14.21 Renewing bottom rail and/or top runner of collapsible gate including
making good all damages and applying priming coat of zinc chromate
yellow primer of approved brand and manufacturer. kg 224.60
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate
and fitting and fixing the same with necessary clamps, nuts and
bolts/welding and erection etc. complete.
14.22.1 Wheel 50 mm dia and below per wheel 146.75
14.22.2 Wheel above 50 mm dia per wheel 240.45
EARTH WORK
14.23 Pumping out water caused by springs, tidal or river seepage, broken
water mains or drains and the like. kilo litre 169.05
14.24 Mud mortar made with local clay good earth. cum 737.00
BRICK WORK
14.25 Brick work with common burnt clay bricks of class designation 7.5
in mud mortar cum 5281.35
WOOD WORK
14.26 Providing and fixing 25 mm thick shutters for cup board etc. :
14.26.1 Panelled or panelled & glazed shutters :
14.26.1.1 Superior class teak wood including nickel
plated bright finished M.S. piano hinges with
necessary screws. sqm 4456.60
14.26.1.2 Ist class teak wood including nickel plated
bright finished M.S. piano hinges with
14.26.2 Glazed shutters :
14.26.2.1 Superior class teak wood including nickel
plated bright finished M.S. piano hinges with
14.26.2.2 Ist class teak wood including nickel plated
bright finished M.S. piano hinges with

No.
14.27 Providing and fixing plain jaffri door and window shutters including
bright or/and black enamelled M.S. butt hinges with necessary screws
35x10 mm laths placed 35 mm apart (frames to be paid separately),
including fixing 50x12 mm beading complete with :
14.27.1 Second class teak wood sqm 4069.70
14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm
with two brass brackets fixed with brass screws and wooden plugs
etc. wherever necessary complete.
14.28.1 20 mm diameter. metre 292.90
14.28.2 25 mm diameter. metre 359.80
14.29 Providing and fixing M.S. round or square bars with M.S. flats at
required spacing in wooden frames of windows and clerestory windows. kg 92.05
14.30 Providing joists (karries) including hoisting, fixing in position and
applying wood preservative on unexposed surface etc. complete
with :
14.30.1 Sal wood cum 90056.65
14.30.2 Hollock wood cum 55939.25
14.31 Providing and fixing bright finished brass single acting spring hinges
with necessary brass screws etc. complete :
14.31.1 150 mm each 647.55
14.31.2 125 mm each 460.25
14.31.3 100 mm each 408.10
14.32 Providing and fixing bright finished brass double acting spring hinges
with necessary brass screws etc. complete :
14.32.1 150 mm each 721.15
14.32.2 125 mm each 614.10
14.32.3 100 mm each 595.40
14.33 Providing and fixing bright finished brass flush bolts with necessary
brass screws etc. complete :
14.33.1 250 mm each 229.45
14.33.2 150 mm each 199.50
14.33.3 100 mm each 145.95
14.34 Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, necessary brass screws etc. to suit shutter
thickness complete each 232.50
14.35 Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1 300 mm each 86.45
14.35.2 250 mm each 82.95
14.35.3 200 mm each 74.40
14.35.4 150 mm each 59.70
14.35.5 100 mm each 52.35

No.
14.36 Providing and fixing bright finished brass fan light pivot with necessary
brass screws etc. complete. each 39.70
14.37 Providing and fixing 300 mm long bright finished brass chain with
hook for fan light including necessary brass screws etc. complete. each 63.65
14.38 Providing and fixing bright finished brass quadrant stay 300 mm long
with necessary brass screws etc. complete. each 162.65
14.39 Providing and fixing bright finished brass helical door spring (superior
quality). each 457.90
14.40 Providing and fixing chromium plated brass butt hinges with necessary
chromium plated brass screws etc. complete.
14.40.1 125x70x4 mm (ordinary type) each 170.10
14.40.2 100x70x4 mm (ordinary type) each 145.60
14.40.3 75x65x4 mm (heavy type) each 162.15
14.40.4 75x40x2.5 mm (ordinary type) each 97.35
14.40.5 50x40x2.5 mm (ordinary type) each 40.80
14.41 Providing and fixing 85x42 mm chromium plated brass pull bolt
lock with necessary chromium plated brass screws, nuts, bolts and
washers etc. complete. each 245.20
FINISHING
14.42 Item Shifted to Sub Head 13 as item 13.87

No.

14.72 Providing and fixing double scaffolding system (cup lock type) on
the exterior side, up to seven story height made with 40 mm dia
M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining
with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
clamps and M.S. staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable condition for the
required duration as approved and removing it there after .The
scaffolding system shall be stiffened with bracings, runners,
connection with the building etc wherever required for inspection of
work at required locations with essential safety features for the
workmen etc. complete as per directions and approval of Engineer-
in-charge .The elevational area of the scaffolding shall be measured
for payment purpose .The payment will be made once irrespective of
duration of scaffolding. sqm 257.95
Note: - This item to be used for maintenance work judicially,
necessary deduction for scaffolding in the existing item to be done.
14.73 Providing and fixing bright finished brass casement window fasteners
or peg stays to windows/ ventilators with necessary welding and
machine screws etc. complete. kg 473.90
14.74 Providing and fixing 14 mm bright finished brass spring catch to
steel centre hung ventilators with necessary welding and machine
screws etc. complete. each 57.30
14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5
sqm and under, including cutting the patch in proper shape, raking
out joints and preparing plastering the wall surface with white cement
based polymer modified self curing mortar, including disposal of
rubbish, all complete as per the direction of Engineer-In-Charge. sqm 512.00
ROUTINE MAINTENANCE WORK
14.75A Cleaning of terrace/loft water storage tank (inside surface area) upto
2000 litre capacity at all heights with coconut brushes, duster etc.,
removal of silt, rubbish from the tank and cleaning the tank with fresh
water disinfecting with bleaching powder @ 0.5gm per litre capacity
of tank including marking the date of cleaning on the side of tank
body with the help of stencil and paint and disposing of malba all
complete as per direction of Engineer-in-Charge. (The old date already
written on tank should be removed with paint remover or black paint

No.
and if date is not written with the stencil or old date is not removed
deduction will be made @ Rs. 0.10 per litre) (if during cleaning any
GI fittings or ball cock is damaged that is to be repaired by contractor
at his own cost and nothing extra will be paid on this account) litre 0.35
14.76 Cleaning and desilting of gully trap chamber, including removal of
rubbish mixed with earth etc. and disposal of same, all as per the
direction of Engineer-in-charge. each 77.65
14.77 Cleaning of chocked sewer line by diesel running vehicle mounting
hydraulic operated high pressure suction cum jetting sewer cleaning
machine fitted with pump having 4000 litres suction capacity and
6000 litres water jetting tank capacity including skilled operator,
supervising engineer etc. for cleaning and partial desilting of manholes
and dechocking of sewer lines. Dechocking and flushing of sewer
line from one manhole to another by high pressure jetting system of
2200 PSI for sewer line from 150mm dia upto 300mm metre 256.90
14.78 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent
staging) including disposal of slit and rubbish, all as per direction of
Engineer-in-Charge. The cleaning shall consist following operations:-
(i)Tank shall be emptied of water by pumping & bottom shall be
cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly
with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose
particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc.
as per direction of Engineer-in-Charge. sqm 63.70
14.79 Disconnecting damaged overhead/terrace PVC water storage tank
of any size from water supply line and removing from the terrace
including shifting at ground level as per direction of Engineer-in- charge. each 317.75
14.80 Providing & fixing White vitreous china water closet squatting pan
(Indian type) along with “S” or “P” trap including dismantling of old
WC seat and “S” or “P” trap at site complete with all operations
including all necessary materials, labour and disposal of dismantled
material i/c malba, all complete as per the direction of Engineer-in
charge.
14.80.1 Long pattern W.C Pan of size 580x440 mm each 2724.10
14.80.2 Orissa pattern W.C Pan of size 580x440 mm each 3537.80
14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust
fan including providing and fixing 300 mm dia PVC pipe conforming
BIS-12818 and making good the same etc. complete as per direction
of Engineer-in-charge. each 220.40
14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled
materials i/c malba all complete as per directions of Engineer-in-
Charge. each 96.00

No.
14.83 Hacking of CC flooring including cleaning for surface etc. complete

as per direction of the Engineer-in-Charge. sqm 2.50
14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of
dismantled pipes (within 50 metres lead) as per direction of Engineer-
in-Charge.
(a) Internal Work- Exposed on wall metre 2.70
14.85 Taking out existing wooden door shutter, repair by cutting, painting
etc. and refixing of repaired door shutters to existing door frames,
including replacement of hinges with screws, etc. as required, all
complete as per the direction of the Engineer-in-charge. each 297.85
14.86 Providing and laying in situ seven course water proofing treatment
with APP (Atactic poly-propylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 litre per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting
of five layers prefabricated with centre core as 20 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately). sqm 592.65
14.87 Providing and laying in situ five course water proofing treatment with
APP (Atactic Polypropylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @ 0.40 litre per sqm,
2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to IS : 702,
3rd layer of roofing membrane APP modified Polymeric membrane
2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers
prefabricated with centre core as 100 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix
is protected on both side with 20 micron HMHDPE film. 5th, the top
most layer shall be finished with brick tiles of class designation 10
grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with
2% integral water proofing compound by weight of cement over a 12
mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately). sqm 408.75
14.88 Providing and laying in situ seven course water proofing treatment
with APP (Atactic Polypropylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 litre per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting
of five layers prefabricated with centre core as 100 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric

No.
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately). sqm 651.50
14.89 Providing and fixing APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 2 mm thick water proofing membrane , black
finished reinforced with glass fibre matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 litre/sqm by the same
membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and
viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using Butane torch and sealing all joints etc., and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm.
Tear strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150°C. Cold flexibility
shall be upto -2°C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised
applicator of the manufacture of membrane.
14.89.1 2mm (for corrugated roof sheets) sqm 419.75
14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer, 3 mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of bitumen
primer for bitumen membrane @ 0.40 litre/sqm by the same
membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and
viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23°C as 350/300 N/5 cm.
Tear strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150°C. Cold flexibility
shall be upto -2°C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised
applicator of the manufacturer of membrane :
14.90.1 3 mm thick sqm 512.95
14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a
coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by
the same membrane manufacture of density at 25°C, 0.87-0.89 kg/
litre and viscocity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all joints
etc, and preparing the surface complete. The vital physical and
chemical parameters of the membrane shall be as under : Joint
strength in longitudinal and transverse direction at 23°C as 650/ 450N/
5cm. Tear strength in longitudinal and transverse direction as 300/

No.
250N. Softening point of membrane not less than 150°C. Cold

flexibility shall be upto -2°C when tested in accordance with ASTM,
D - 5147. The laying of membrane shall be got done through the
authorised applicator of the manufacturer of membrane :
14.91.1 3 mm thick sqm 535.00
14.92 Extra for covering top of membrane with Geotextile, 120 gsm non
woven, 100% polyester of thickness 1 to 1.25 mm bonded to the
membrane with intermittent touch by heating the membrane by Butane
Torch as per manufactures recommendation. sqm 99.75
Note: Item no 14.86 to 14.92 are brought from Sub Head 22 i.e.
Water Proofing, Item no 22.15 to 22.21
14.93 Providing round the clock security guard without gun for watch &
ward of Government premises and its all belongings by deploying
neatly dressed security guards in 8 hour’s shift including necessary
T&P like torch, lathi and uniform etc.complete,as per the direction of
Engineer-in-charge.(One job means 8 hour’s duty). each job 732.55
14.94 Providing round the clock security guard with gun for watch & ward
of Government premises and its all belongings by deploying neatly
dressed security guards in 8 hour’s shift including necessary T&P
like torch, lathi and uniform etc.complete, as per the direction of
Engineer-in-charge.(One job means 8 hour’s duty). each job 803.85
Note: Item no 14.93 & 14.94 are brought from Sub Head 26 i.e.
New Technologies and Materials, Item no 26.20 & 26.21

SUB HEAD : 15.0
DISMANTLING
AND
DEMOLISHING
256
BASIC RATES (SH:15.0 DISMANTLING AND DEMOLISHING)

No.
0038 Tractor with ripper attachment day 1200.00

0039 Tractor with trolley day 1350.00
0040 Air compressor 250 cfm with two leads for pneumatic cutters / hammers day 1600.00
0041 Joint cutting machine with 2-3 blades day 800.00
0128 Mate day 617.00
2264 Carriage of Rubbish cum 103.77
SUB HEAD : 15.0 DISMANTLING AND DEMOLISHING 257

15.0 DISMANTLING AND DEMOLISHING
No.
15.1 Demolishing lime concrete manually/ by mechanical means and
disposal of material within 50 metres lead as per direction of Engineer-
in-charge. cum 607.50
15.2 Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design
mix) cum 1737.45
15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design
mix) cum 1072.80
15.3 Demolishing R.C.C. work manually/ by mechanical means including
stacking of steel bars and disposal of unserviceable material within
50 metres lead as per direction of Engineer - in- charge. cum 2534.70
15.4 Demolishing R.B. work manually/ by mechanical means including
stacking of steel bars and disposal of unserviceable material within
50 metres lead as per direction of Engineer-in- charge. cum 2267.15
15.5 Extra for cutting reinforcement bars manually/ by mechanical means
in R.C.C. or R.B. work (Payment shall be made on the cross
sectional area of R.C.C. or R.B. work) as per direction of Engineer-
in-charge. sqm 863.35
15.6 Extra for scrapping, cleaning and straightening reinforcement from
R.C.C. or R.B. work. kg 6.70
15.7 Demolishing brick work manually/ by mechanical means including
stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
15.7.1 In mud mortar cum 503.00
15.7.2 In lime mortar with old mughal bricks cum 1271.95
15.7.3 In lime mortar cum 607.50
15.7.4 In cement mortar cum 1469.90
15.8 Removing mortar from bricks and cleaning bricks including stacking
within a lead of 50 m (stacks of cleaned bricks shall be measured):
15.8.1 From brick work in mud mortar 1000 Nos 3354.55
15.8.2 From brick work in lime mortar 1000 Nos 3886.35
15.8.3 From brick work in cement mortar 1000 Nos 4880.90
15.9 Demolishing stone rubble masonry manually/ by mechanical means
including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction of
Engineer-in-charge :

No.
15.10 Dismantling dressed stone work ashlar face stone work, marble work
or precast concrete work manually/ by mechanical means including
stacking of serviceable and disposal of unserviceable material within
50 metres lead as per direction of Engineer-in-charge :
15.11 Removing mortar from and cleaning stones and concrete articles
(net quantity of stacks of cleaned materials will be measured):
15.12 Dismantling doors, windows and clerestory windows (steel or wood)
shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below each 274.50
15.12.2 Of area beyond 3 sq. metres each 375.65
15.13 Taking out doors, windows and clerestory window shutters (steel or
wood) including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below each 106.55
15.13.2 Of area beyond 3 sq. metres each 140.70
15.14 Dismantling wood work in frames, trusses, purlins and rafters up to
10 metres span and 5 metres height including stacking the material
within 50 metres lead :
15.14.1 Of sectional area 40 square centimetres and above cum 3345.90
15.14.2 Of sectional area below 40 square centimetres metre 13.40
15.15 Extra for dismantling trusses, rafters, purlins etc. of wood work
for every additional span of one metre or part thereof beyond 10
metres :
15.15.1 Of sectional area 40 square centimetres and above cum per
metre span 441.50
15.15.2 Of sectional area below 40 square centimetres metre per
metre span 1.25
15.16 Extra for dismantling trusses, rafters, purlins etc. of wood work
for every additional height of one metre or part thereof beyond 5
metres :
15.16.1 Of sectional area 40 square centimetres and above cum per
metre span 636.25
15.16.2 Of sectional area below 40 square centimetres metre per
metre span 2.50
15.17 Dismantling steel work in single sections including dismembering
and stacking within 50 metres lead in:
15.17.1 R.S. Joists kg 2.45
15.17.2 Channels, angles, tees and flats kg 1.70

No.
15.18 Dismantling steel work in built up sections in angles, tees, flats and
channels including all gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within 50 metres lead. kg 4.15
15.19 Dismantling steel work manually/ by mechanical means in built up
sections without dismembering and stacking within 50 metres lead
as per direction of Engineer-in-charge. kg 2.75
15.20 Extra for dismantling trusses, rafters, purlins etc. of steel work for kg per
every additional span of one metre or part thereof beyond 10 metres metre span 0.60
15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for kg per
every additional height of one metre or part thereof beyond 5 metres. metre height 0.60
15.22 Extra for marking of structural steel work required to be re-erected. kg 3.45
15.23 Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm sqm 54.85
15.23.2 For thickness of tiles above 25 mm and up to 40 mm sqm 85.70
15.24 Demolishing dry brick pitching in floors, drains etc. including stacking
of serviceable material and disposal of unserviceable material within
50 metres lead : cum 940.50
15.25 Dismantling stone slab flooring laid in cement mortar including
within 50 metres lead. sqm 190.30
15.26 Demolishing brick tile covering in terracing including stacking of
serviceable material and disposal of unserviceable material within
50 metres lead. sqm 79.60
15.27 Demolishing mud phaska in terracing and disposal of material within
50 metres lead. cum 652.30
15.28 Dismantling roofing including ridges, hips, valleys and gutters etc.,
and stacking the material within 50 metres lead of:
15.28.1 G.S. Sheet sqm 121.90
15.28.2 Asbestos cement sheet sqm 56.90
15.29 Dismantling stone slab roofing over wooden karries or R.C.C. battens
(dismantling karries and battens to be paid for separately), including
within 50 metres lead. cum 1902.90
15.30 Dismantling jack arch roofing and floors including stacking of
50 metres lead. sqm 181.35
15.31 Dismantling tiled roofing with battens, boarding etc.
complete including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead. sqm 150.00
15.32 Demolishing thatch roofing including mats, bamboo, jaffari etc.
complete including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead. sqm 41.30

No.
15.33 Dismantling wooden ballies in posts and struts including stacking

within 50metres lead. metre 14.95
15.34 Dismantling and stacking within 50 metres lead, fencing posts or
struts including all earth work and dismantling of concrete etc. in
base of:
15.34.1 T’ or ‘L’ iron or pipe each 170.25
15.34.2 R.C.C. each 182.60
15.35 Cutting ballies or wooden posts of fencing at the point of projection
above the concrete or ground and stacking the same within 50 metres
lead. each 11.15
15.36 Dismantling barbed wire or flexible wire rope in fencing including
making rolls and stacking within 50 metres lead. kg 26.25
15.37 Dismantling wooden trellis work excluding frames but including
stacking the serviceable material within 50 metres lead. sqm 47.15
15.38 Dismantling expanded metal or I.R.C. fabrics with necessary battens
and beading including stacking the serviceable material within 50
metres lead. sqm 55.00
15.39 Dismantling wooden boardings in lining of walls and partitions,
excluding supporting members but including stacking within 50
metres lead :
15.39.1 Up to 10 mm thick sqm 44.90
15.39.2 Thickness above 10 mm up to 25 mm sqm 57.30
15.40 Dismantling precast concrete or stone slabs in walls, partition walls
etc. including stacking within 50 metres lead :
15.40.1 Thickness up to 40 mm sqm 208.40
15.41 Dismantling cement asbestos or other hard board ceiling or partition
walls including stacking of serviceable materials and disposal of
unserviceable materials within 50 metres lead. sqm 42.00
15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps
including stacking the material within 50 metres lead :
15.42.1 75 to 80 mm dia pipe metre 54.00
15.42.2 100 mm dia pipe metre 55.65
15.42.3 150 mm dia pipe metre 57.30
15.43 Dismantling manually/ by mechanical means including stacking of
50 metres lead as per direction of Engineer-in-charge :
15.43.1 Water bound macadam road sqm 156.00
15.43.2 bituminous road sqm 306.65

No.
15.44 Dismantling G.I. pipes (external work) including excavation and refilling
trenches after taking out the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres lead as per direction of
15.44.1 15 mm to 40 mm nominal bore metre 108.15
15.44.2 Above 40 mm nominal bore metre 117.75
15.45 Dismantling C.I. pipes including excavation and refilling trenches
after taking out the pipes, manually/ by mechanical means breaking
lead caulked joints, melting of lead and making into blocks including
stacking of pipes & lead at site within 50 metre lead as per direction
of Engineer-in-charge:
15.45.1 Up to 150 mm diameter metre 299.05
15.45.2 Above 150 mm dia up to 300 mm dia metre 395.10
15.45.3 Above 300 mm diameter metre 515.45
15.46 Dismantling steel cylinder R.C. pipes including excavation and
refilling trenches after taking out the pipes, manually/ by mechanical
means breaking lead caulked joints, melting of lead and making into
blocks including stacking of pipes & lead at site within 50 metres
lead as per direction of Engineer-in-charge :
15.47 Dismantling asbestos cement pressure pipes including excavation
and refilling trenches after taking out the pipes manually/ by
mechanical means and stacking the pipes within 50 metres lead as
per direction of Engineer-in-charge :
15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of
various sizes including demolishing of R.C.C. work manually/ by
mechanical means and stacking of useful materials near the site
and disposal of unserviceable materials within 50 metres lead as per
15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection
chambers of various sizes including demolishing of R.C.C. work
manually/ by mechanical means and stacking of useful materials
near the site and disposal of unserviceable materials within 50 metres
lead as per direction of Engineer-in-charge. each 292.25
15.50 Dismantling of R.C.C. spun vent shaft including excavating the
cement concrete pit completely, taking out the shaft, refilling
the excavated gap, stacking the useful materials near the site and
disposal of unserviceable materials within 50 metres lead. each 3353.90
15.51 Dismantling of road gully chamber of various sizes including C.I.
grating with frame including stacking of useful materials near the
site and disposal of unserviceable materials within 50 metres lead
including refilling the excavated gap. each 686.70

No.
15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

including stacking of useful materials near the site and disposal of
unserviceable materials within 50 metres lead. each 668.15
15.53 Dismantling of C.I. sluice valve including stacking of useful materials
within a lead of 50 metres
15.53.1 Up to 150 mm diameter each 239.05
15.53.2 Above 150 mm diameter each 878.70
15.54 Dismantling of spindle fire hydrant including stacking of useful
materials within 50 metres lead. each 537.60
15.55 Dismantling of cement concrete platform along with curtain walls
and base concrete etc. including stacking of useful materials near
the site and disposal of unserviceable materials within 50 metres
lead :
15.55.1 120 x 120 cm (outside to outside) each 787.70
15.56 Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50 metres lead. sqm 39.00
15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed
glazing and false ceiling including disposal of unserviceable material
and stacking of serviceable material with in 50 meters lead
as directed by Engineer-in-charge. sqm 42.00
15.58 Demolishing R.C.C. work by mechanical means and stockpiling at
designated locations and disposal of dismantled materials up to a
lead of 1 kilometre, stacking serviceable and unserviceable material
separately including cutting reinforcement bars. cum 2130.00
15.59 Dismantling of flexible pavement (bituminous courses) by mechanical
means and disposal of dismantled material up to a lead of 1 kilometre,
as per direction of Engineer-in-charge. cum 321.25
15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled
or waste materials by mechanical means, including loading,
transporting, unloading to approved municipal dumping ground or as
approved by Engineer-in-charge, beyond 50 m initial lead, for all leads
including all lifts involved. cum 138.85

SUB HEAD : 16.0
ROAD WORK
264
BASIC RATES (SH: 16.0 ROAD WORK)

No.
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 800.00
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 3000.00
0004 Production cost of concrete by batch mix plant cum 350.00
0007 Hire charges of Coaltar Sprayer day 300.00
0008 Hire charges of Barber green, drying, mixing and Asphalt Plant,
with accessories, capacity 30/45 tonne day 7700.00
0009 Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc. cum 210.00
0012 Vibrator (Needle type 40 mm) day 370.00
0013 Machine for rubbing of floors day 300.00
0014 Front end loader capacity 1.00 cum day 6000.00
0016 Mastic Cooker day 750.00
0017 Hire and running charges of tipper day 1700.00
0018 Hire and running charges of loader day 5000.00
0021 Pin vibrator day 325.00
0022 Surface Vibrator day 400.00
0023 Hot Bitumen Mixer 0.5 cum i/c hand cart day 3500.00
0029 Carriage of concrete by transit mixer km/cum 30.00
0030 Generator 250 KVA day 2500.00
0033 Paint applicator day 750.00
0038 Tractor with ripper attachment day 1200.00
0041 Joint cutting machine with 2-3 blades day 800.00
0042 C.C .batch mix plant day 10000.00
0043 Road sweeper day 550.00
0045 Slip form paver with sensor day 13000.00
0046 Water tanker 5000 litre day 1200.00
0047 Concrete joint cutting machine day 900.00
0048 Texturing machine day 925.00
0049 Dozer D-80-A 12 hour 1500.00
0050 Motor Grader 3.35 metre blade hour 2450.00
0051 Hydraulic Excavator of 1 cum bucket hour 1000.00
0052 Front end loader 1 cum bucket capacity hour 900.00
0053 Tipper-5 Cum tonne/km 3.00
0054 Vibratory roller 8 to 10 tonne hour 600.00
0055 Smooth Wheeled Roller 8 to 10 tonne hour 300.00
0056 Tandem Road Roller hour 1200.00
SUB HEAD : 16.0 ROAD WORK 265

No.
0057 Water Tanker 5 to 6 KL capacity hour 150.00

0058 Air compressor hour 200.00
0059 Wet Mix Plant 60 TPH hour 800.00
0060 Mechanical Broom Hydraulic hour 360.00
0061 Emulsion Pressure Distributor of capacity 1750 sqm per hour hour 800.00
0062 Hot mix Plant -120 TPH capacity hour 15000.00
0063 Hot mix Plant 100 TPH Capacity hour 13000.00
0064 Paver finisher Hydrostatic with sensor control 100 TPH hour 1500.00
0065 Paver finisher Mechanical 100 TPH hour 800.00
0066 Batching and Mixing Plant @ 75 cum per hour hour 2400.00
0068 Concrete Paver finisher with 40 HP Motor and sensor hour 3000.00
0069 Generator 250 KVA hour 350.00
0070 Generator 100 KVA/125 KVA hour 250.00
0071 Truck 5.5 cum/10 tonnes tonne km 3.00
0075 Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour 350.00
0076 Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output hour 12000.00
0083 Hire charges of TATA 407 or equivalent for local shifting. day 1200.00
0113 Chowkidar day 558.00
0125 Mason (for plain stone work) 2nd class day 679.00
0128 Mate day 617.00
0157 Operator (Pile/ Special machine) day 738.00
0286 Brick Aggregate (Single size) : 50 mm nominal size cum 650.00

No.

0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0304 Bajri cum 1000.00
0309 Paving bitumen of grade VG-10 of approved quality tonne 25614.00
0310 Bitumen emulsion tonne 30099.00
0312 Bitumen grade PMB - 40 tonne 32200.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 34000.00
0314 Bitumen hot sealing compound : grade A kg 28.00
0317 Premoulded joint filler 12 mm thick sqm 360.00
0323 Separation Membrane of impermeable plastic sheeting
125 micron thick sqm 12.00
0349 Curing compound litre 38.00
0364 Wire brush each 20.00
0365 Soft brush each 20.00
0369 Plastic sheet,1.25 mm thick for dowel bars sqm 25.00
0370 Coal (steam) quintal 440.00
0371 Sealant primer kg 130.00
0374 Pre moulded Joint filler, 25 mm thick for expansion joint. sqm 400.00
0773 Unslaked lime quintal 300.00
0777 Dry hydrated lime (factory made) quintal 290.00
0784 Marble dust/ powder cum 1130.00
0810 Moorum cum 500.00
0979 Royalty for good earth cum 40.00
0983 Fine sand (zone IV) cum 900.00
1005 Twisted steel/ deformed TMT bars Fe-500D quintal 4600.00
1008 Flats up to 10 mm in thickness quintal 4500.00

No.
1013 Mild steel sheets of 1.00 mm thickness for tanks quintal 4600.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not
less than 7.75 kg/sqm sqm 430.00
1028 Straining bolts each 80.00
1029 Galvanised steel barbed wire of 9.8 kg /100metre quintal 5500.00
1030 Galvanised steel turn buckles each 25.00
1151 Boundary stone top chisel dressed 15x15x90 cm each 80.00
1158 Stone for pitching 15 cm x 22.5 cm cum 600.00
1159 Stone dust cum 1100.00
1179 Crushed stone 2.36 mm to 12.5 mm size cum 900.00
1215 Welding by electric plant cm 2.00
1235 Diesel litre 73.50
1241 Commercial LPG in cylinder kg 82.00
1980 Fly ash cum 10.00
2200 Carriage of Steam coal tonne 120.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 112.79
2208 Carriage of Lime cum 103.77
2211 Carriage of Tar / Bitumen tonne 103.77
2215 Carriage of Soling stone & masonry stone cum 122.08
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 92.24
2241 Carriage of Good earth cum 129.71
2260 Carriage of Brick aggregate cum 112.79
2261 Carriage of Fine sand cum 103.77
2265 Carriage of Moorum cum 103.77
2266 Carriage of Surkhi cum 103.77
2267 Carriage of Stone dust cum 103.77
2302 Carriage of G.I. sheet and accessories tonne 92.24
2311 Carriage of Red bajri cum 103.77
2314 Carriage of Barbed wire tonne 92.24
2335 Carriage of sand cum 103.77
2342 Carriage of Solvent / Diesel. quintal 10.38
2602 Common burnt clay F.P.S. (non modular) bricks class designation 1000 Nos 4500.00
2704 Aluminium Strip 40 mm wide and 2 mm thick kg 240.00
2901 Stone Aggregate (Single size): 100 mm nominal size cum 1350.00

No.
2902 Stone Aggregate (Single size): 80 mm nominal size cum 1350.00

2903 Stone chippings/ screenings 4.75 mm nominal size cum 1400.00
2904 Stone chippings/ screenings 150 micron nominal size cum 1400.00
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum 500.00
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum 480.00
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 1150.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 1150.00
2914 Solvent kg 25.00
2916 Paving Asphalt VG 10 of approved quality tonne 24000.00
5001 Mobil oil litre 315.00
6501 Sand zone V (Jamuna) cum 1225.00
7254 Hardening compound litre 38.00
7255 Road marking paint (spirit based) litre 115.00
7256 Superior quality road marking paint (water based) litre 135.00
7280 Waste plastic additive tonne 40000.00
7295 Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) sqm 1600.00
7296 Granite of any colour, 30 mm thick (slab area upto 0.50 sqm) sqm 1800.00
7309 Paving Asphalt of grade VG-30 of approved quality tonne 39570.00
7318 Plasticizer / super plasticizer kg 36.00
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887 tonne 19000.00
7426 Cat's eye each 100.00
7739 Modified Bitumen Refinery produced CRMB - 55 tonne 29995.00
7741 Modified Bitumen Refinery produced CRMB - 60 tonne 30536.00
7742 Bitumen emulsion medium setting (M.S.) conforming to IS : 8887 tonne 27909.00
7753 Stone Boulder 50 mm to 200 mm cum 850.00
7773 Coloured inter locking C.C. paver Block (60 mm thick, M-35) sqm 450.00
7774 Stone size 10x10x7.50cm each 10.00
7893 Tactile tile sqm 1000.00
7895 Matt finished vitrified tile 100x100 x16 mm sqm 1000.00
7896 Vitrified tile sqm 500.00
8576 Powder coated Galvanized Iron intermediate cross-T section wire
diameter 3.00 mm). sqm 190.00
8577 Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated.
Mesh wire diameter 2.70/3.70 mm (ID/OD). sqm 220.00
8578 Crates made of Mesh type 10x12 (D=100 mm) Zn+10% Al alloy +
PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD). sqm 290.00
8685 Delineator each 300.00
8686 Precast C.C. Kerb stone M - 25 cum 5500.00
8687 Thermoplastic paint kg 65.00

No.
8688 Glass beads kg 70.00

8689 Interlocking C.C. paver block ( 60 mm thick, M-30) sqm 400.00
8690 High intensity retro - reflective sheet as per IRC 67-2001 sqm 1300.00
8691 Punched tape concertina coil 600 mm dia 10 m openable
length (Total length 90 m) bundle 600.00
8692 RBT reinforced barbed wire metre 6.50
8693 Turn buckle and strengthening bolt each set 40.00
8694 Precast pavement slab 450 x 450 x 50 mm (M - 30) each 135.00
8695 Chain link fabric fencing mesh of size 50x50 mm made of
G.I. wire of dia 4 mm sqm 280.00
G.I. wire of dia 4 mm, PVC coated to outer dia 5 mm sqm 300.00
G.I. wire of dia 3 mm sqm 360.00
8785 Interlocking C.C. paver block ( 80 mm thick, M-30) sqm 470.00

16.0 ROAD WORK
No.
ROADS
16.1 Preparation and consolidation of sub grade with power road roller of
8 to 12 tonne capacity after excavating earth to an average of 22.5
cm depth, dressing to camber and consolidating with road roller
including making good the undulations etc. and re-rolling the sub
grade and disposal of surplus earthwith lead upto 50 metres. sqm 156.75
16.2 Extra for compaction of earth work in embankment under optimum
moisture conditions to give at least 95% of the maximum dry density
(proctor density). cum 18.20
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate cum 1840.05
16.3.2 63 mm to 45 mm size stone aggregate cum 1535.65
16.3.3 53 mm to 22.4 mm size stone aggregate cum 1749.75
16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm cum 819.85
16.3.6 Stone screening 13.2 mm nominal size (Type A) cum 1727.65
16.3.7 Stone screening 11.2 mm nominal size (Type B) cum 1978.50
16.3.8 Red bajri cum 1476.80
16.3.9 Good earth cum 483.90
16.3.10 Moorum cum 807.80
16.4 Laying, spreading and compacting stone aggregate of specified sizes
to WBM specifications in uniform thickness, hand picking, rolling
with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to
proper grade and camber, applying and brooming requisite type of
screening / binding material to fill up interstices of coarse aggregate,
watering and compacting to the required density . cum 767.25
16.5 Laying water bound macadam sub-base with brick aggregate and
binding material, earth etc. including screening, sorting and spreading
to template and consolidation with light power road-roller etc.
complete.(payment for brick aggregate and moorum etc. to be made
separately)
16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering
and rolling complete including preparation of the surface and rolling.
16.6.1 With road roller/ hand roller sqm 19.90
16.7 Brick edging in full brick width and half brick depth including
excavation, refilling and disposal of surplus earth lead upto 50 metres.
16.7.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 metre 167.80

No.
16.8 Brick edging laid lengthwise with half brick depth including excavation,
refilling and disposal of surplus earth lead upto 50 metres :
16.9 Scarifying metalled (water-bound) road surface including disposal of
rubbish, lead upto 50 m and consolidation of the aggregate received
from scarifying with power road roller of 8 to 10 tonne capacity. sqm 24.55
16.10 Making bajri path including preparation of subgrade, supplying and
laying brick aggregate of 50 mm nominal size 7.5 cm deep with
blinding material consisting of 12 mm moorum and 12 mm red bajri
consolidated with road roller. sqm 172.45
16.11 Dry stone pitching 22.5 cm thick including supply of stones and
preparing surface complete. sqm 730.20
16.12 Dry brick pitching half brick thick in drains including supply of bricks
and preparing the surface complete :
class designation 7.5 sqm 568.70
16.13 Cutting road and making good the same including supply of extra
quantities of materials i.e. aggregate, moorum screening, red bajri
and labour required.
16.13.1 bituminous portion cum 3677.15
16.13.2 Water bound macadam cum 2275.95
16.14 Cutting bajri paths and making good the same including supply of
extra quantities of brick aggregate, moorum and red bajri required. sqm 212.25
FENCING
16.15 Supplying at site :
16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3
(1 cement : 1.5 coarsesand : 3 graded stone aggregate
12.5 mm nominal size) with wooden plugs or 6mm bar
nibs wherever required as per direction of Engineer-in-
charge (cost of earth works in excavation, concrete works
in foundation to be paid separately). cum 26754.35
16.15.2 Welded steel wire fabric of required width having
rectangular mesh painted with two or more coats of enamel
paint of approved shade over a coat of primer (Priming &
Painting to be paid for separately). kg 74.35
16.16 Supplying and fixing turn buckles and straining bolts for barbed wire
fencing. each set 238.65
16.17 Fencing with R.C.C. post placed at required distance, embedded in
cement concrete blocks, every 15th post, last but one end post and
corner post shall be strutted on both sides and end post one side
only, provided with horizontal lines and two diagonals of barbed wire
weighing 9.38 kg per 100 metres (minimum), between the two posts
fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire
tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C.

No.
posts, struts, earth work and concrete to be paid for separately) :-

Payment to be made per metre cost of total length of barbed wire
used.
16.17.1 With G.I. barbed wire metre 12.00
16.18 Fencing with angle iron post placed at required distance embedded
in cement concrete blocks, every 15th post, last but one end post
and corner post shall be strutted on both sides and end post on one
side only and provided with horizontal lines and two diagonals
interwoven with horizontal wires, of barbed wire weighing 9.38 kg per
100 m (minimum), between the two posts fitted and fixed with G.I.
staples, turn buckles etc. complete. (Cost of posts, struts, earth
work and concrete work to be paid for separately). Payment to be
made per metre cost of total length of barbed wire used.
16.18.1 With G.I. barbed wire metre 19.05
16.19 Supplying at site Angle iron post & strut of required size including
bottom to be split and bent at right angle in opposite direction for
10 cm length and drilling holes upto 10 mm dia. etc. complete. kg 92.40
16.20 Welded steel wire fabric fencing with posts of specified material and
of standard design placed and embedded in cement concrete blocks
45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone
aggregate 40 mm nominal size), every 15th post, last but one end
post and corner post shall be strutted on both sides and end post on
one side only and struts embedded in cement concrete blocks
70x45x50 cm of the same mix, provided with welded steel wire fabric
fixed between the posts fitted and fixed with G.I. staples on wooden
plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts,
welded steel wire fabric, painting, earth work in excavation and
concrete to be paid for separately).
sqm 51.00
ROAD SIGNS
16.21 Engraving letters in hard stone per cm
height
per letter 8.20
16.22 Providing and fixing 15x15x90 cm boundary stone of hard stone with
top 30 cm chisel dressed on all four sides including top (cost of
excavation, refilling and concrete etc. to be paid for separately).
each 207.75
16.23 Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm
high precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5
coarse sand : 3 graded stone aggregate 20 mm nominal size)
boundary stone as per standard design, including finishing smooth
with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation,
refilling and concreting to be paid for separately). each 663.55
16.24 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal
size) kilometre stone as per standard design, including finishing
smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding

No.
the cost of earth work, concrete in foundation, painting and lettering

etc. which shall be paid for separately.
16.24.1 35x111x25 cm size each 2308.50
16.24.2 50x152.5x25 cm size each 4211.25
16.24.3 35x93.5x18 cm size each 1546.00
SURFACE DRESSING
16.25 Surface dressing on new surface with paving bitumen of grade VG -
10 of approved quality using 2.25 kg of bitumen per sqm with 1.65
cum of stone chippings 13.2 mm nominal size per 100 sqm of road
surface, including consolidation with road roller of 6 to 8 tonne
capacity etc. complete: sqm 167.25
16.26 Surface dressing on new surface in two coats with bitumen of grade
VG -10 of approved quality using 1.8 kg of bitumen per sqm with 1.5
cum of stone chippings 13.2 mm nominal size per 100 sqm of road
surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu.
metre of stone chippings 11.2 mm nominal size per 100 sqm of road
surface for second coat, including consolidation of each coat
separately with road roller of 6 to 8 tonne capacity etc. complete. sqm 232.05
16.27 Surface dressing on old surface with hot bitumen of grade VG - 10 of
approved quality using 1.95 kg of bitumen per sqm with 1.50 cum of
stone chippings 11.2 mm nominal size per 100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne capacity, etc.
complete. sqm 130.40
16.28 Surface dressing one coat on new surface with bitumen of specified
grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone
chippings 13.2 mm nominal size per 100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne capacity , etc.
complete :
16.28.1 Using bitumen emulsion (minimum 50% bitumen content-
RS grade conforming to IS : 8887) sqm 157.95
16.29 Surface dressing one coat on old surface with bitumen of specified
grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of
stone chippings 11.2 mm nominal size per 100 sqm of road surface,
including consolidation with road roller of 6 to 8 tonne capacity etc.
complete :
16.29.1 Using bitumen emulsion (minimum 50% bitumen content-
RS grade conforming to IS : 8887) sqm 100.00
PREMIX CARPET
16.30 Providing and applying tack coat using hot straight run bitumen of
grade VG - 10, including heating the bitumen, spraying the bitumen
with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per
specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm sqm 42.05
16.30.2 On bituminous surface @ 0.50 Kg / sqm sqm 33.65

No.
16.31 Providing and applying tack coat using bitumen emulsion conforming
to IS:8887, using emulsion pressure distributer including preparing
the surface & cleaning with mechanical broom.
16.31.1 With rapid setting bitumen emulsion
16.31.1.1 On W.B.M / W.M.M. @ 0.4kg/sqm sqm 11.85
16.31.1.2 On bituminous surface @ 0.25kg/sqm sqm 8.05
16.31.2 With medium setting bitumen emulsion
16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm sqm 16.65
16.31.2.2 On bituminous surface @ 0.25kg/sqm sqm 11.00
Note - Use of Item No. 16.81.1 shall be restricted only per site
at sub zero temperature or for emergency application
16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone
chippings of 13.2 mm size and 11.2 mm size respectively per 100
sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings
of 13.2 mm and 11.2 mm size respectively, including a tack coat
with hot straight run bitumen, including consolidation with road roller
of 6 to 9 tonne capacity etc. complete (tack coat to be paid for
separately).
16.32.1 With paving Asphalt grade VG - 10 heated and then mixed
with solvent at the rate of 70 grams per kg of asphalt sqm 173.05
16.32.2 With paving Asphalt grade VG - 30 with no solvent sqm 199.65
16.32.3 With Refinery Modified Bitumen CRMB 55 conforming to
IRC: SP: 53 sqm 184.60
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone
chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm
and 52 kg and 56 kg of hot bitumen per cum of stone chippings of
13.2 mm and 11.2 mm size respectively, including a tack coat with
hot straight run bitumen, including consolidation with road roller of 6
to 9 tonne capacity etc. complete (tack coat to be paid for separately).
16.33.2 With paving Asphalt grade VG - 30 with no solvent sqm 241.00
IRC: SP: 53 sqm 222.20
16.34 2 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2
mm nominal size per 100 sqm and bitumen emulsion (medium setting
min. 65% bitumen content) complying with IS : 8887, using 96 kg
per cum of chippings, including consolidation with road roller of 6 to
9 tonne capacity etc. complete. sqm 164.25
16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10
mm nominal size per 100 sqm and bitumen emulsion (medium setting
min. 65% bitumen contents) complying with IS : 8887, using 96 kg
per cum of chippings of road surface, including consolidation with
road roller etc complete . sqm 198.35

No.
16.36 Providing and laying Bitumen Penetration Macadam with hard stone
aggregate of quality, size and grading as specified, with bitumen of
suitable penetration grade, including required key aggregate as
specified, spreading coarse aggregate with the help of self propelled/
tipper tail mounted aggregate spreader and applying bitumen by a
pressure distributor and then spreading key aggregate with the help
of aggregate spreader complete, including consolidation with road
roller of minimum 8 to 10 tonne capacity to achieve specified values
of compaction and surface accuracy :
16.36.1 For 50mm compacted thickness using coarse aggregate
of size 50-20 mm graded @ 0.60 cum per 10 sqm key
aggregate of size 12.5 mm graded @ 0.15 cum per 10
sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. sqm 390.15
16.36.2 For 75 mm compacted thickness in two layers using stone
aggregate of size 63-41 mm graded @ 0.90 cum per 10
sqm key aggregate of size 20.0 mm graded @ 0.18 cum
per 10 sqm. With paving asphalt grade VG - 10 @ 68 kg/
10 sqm. sqm 572.35
16.37 Providing and laying bitumen mastic wearing course (as per
specifications) with industrial bitumen of grade 85/25 conforming to
IS : 702, prepared by using mastic cooker and laid to required level
and slope, including providing antiskid surface with bitumen precoated
fine grained hard stone chipping of approved size at the rate of 0.005
cum per 10 sqm and at approximate spacing of 10 cm centre to
centre in both directions, pressed into surface protruding 1 mm to 4
mm over mastic surface, including cleaning the surface, removal of
debris etc. all complete. (Considering bitumen using 10.2% as per
MORTH specification).
16.37.1 25 mm thick sqm 671.85
16.37.2 40 mm thick sqm 1074.95
16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality,
using stone chippings (60% with 12.5 mm nominal size and 40%
with 10 mm nominal size) @ 1.65 cum per 100 sqm and coarse
sand @ 1.65 cum per 100 sqm of road surface and with bitumen @
56 kg/cum of stone chippings and @ 128 kg/cum of sand over a
tack coat with hot straight run bitumen, including consolidation
with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid
separately) :
16.38.2 With paving Asphalt grade VG - 30 sqm 317.45
IRC: SP : 53 sqm 285.75
16.39 4 cm thick bitumastic sheet with hot bitumen of approved quality,
using stone chippings (60% with 12.5 mm nominal size and 40%
with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse
sand @ 2.60 cum per 100 sqm of road surface and with bitumen @

No.
56 kg/cum of stone chippings and @ 128 kg/cum of sand over a

tack coat with hot straight run bitumen, including consolidation
with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid
separately) :
16.39.2 With paving asphalt grade VG - 30 with no solvent sqm 481.55
IRC: SP : 53 sqm 431.45
SEAL COAT
16.40 Providing and laying seal coat of premixed fine aggregate ( passing
2.36 mm and retained on 180 micron sieve) with bitumen using 128
kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate
and 0.60 cum of fine aggregate per 100 sqm of road surface, including
rolling and finishing with road roller all complete. sqm 73.70
16.41 Providing and laying seal coat over prepared surface of road with
bitumen heated in bitumen boiler fitted with the spray set spraying
using 98 kg of bitumen of grade VG - 10 and blinding surface with
0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm
sieve and retained on 2.36 mm sieve) per 100 sqm of road surface,
including rolling and finishing with power road roller all complete. sqm 99.15
Note: Seal coat items to be operated only with the prior approval of
chief Engineer concerned.
CONCRETE PAVEMENTS
16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 40 mm nominal size) in pavements, laid to required slope
and camber in panels as required including consolidation finishing
and tamping complete. cum 6840.85
16.43 Providing and laying design mix cement concrete of M-30 grade, in
roads/ taxi tracks/ runways, using cement content as per design
mix, using coarse sand and graded stone aggregate of 40 mm nominal
size in appropriate proportions as per approved & specified design
criteria, providing dowel bars with sleeve/ tie bars wherever required,
laying at site, spreading and compacting mechanically by using
needle and surface vibrators, levelling to required slope/ camber,
finishing with required texture, including steel form work with sturdy
M.S. channel sections, curing, making provision for contraction/
expansion, construction & longitudinal joints (10 mm wide x 50 mm
deep) by groove cutting machine, providing and filling joints with
approved joint filler and sealants, complete all as per direction of
Engineer-in-charge (Item of joint fillers, sealants, dowel bars with
sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/
less cement used as per design mix is payable/ recoverable separately.
16.43.1 Cement concrete prepared with batch mixing machine cum 8752.35
16.43.2 Cement concrete manufactured in automatic batching
plant (RMC plant) i/c transportation to site in transit mixer cum 9153.75

No.
16.44 Extra for providing and mixing hardening compound of approved quality
as per manufacturer’s specification in cement concrete. litre 50.85
16.45 Providing and fixing in position pre-moulded joint filler in expansion per cm depth
joints. per cm width
per metre
length 3.10
16.46 Providing and laying in position bitumen hot sealing compound for
expansion joints etc.
16.46.1 Using grade ‘A’ sealing compound. per cm depth
per cm width
per metre
length 3.30
PAINTING AREA/RUNWAY MARKING
16.47 Painting runway/taxi track/apron marking with adequate nos of coats
to give uniform finish with road marking paint of superior make as
approved by the Engineer-in-charge, i/c cleaning the surface of ail
dirt, scales, oil, grease and other foreign material etc. and lining out
complete.
16.47.1 New work (Two or more coats) sqm 150.85
16.47.2 Old work (One or more coats) sqm 96.40
16.48 Painting road surface marking with adequate nos of coats to give
uniform finish with ready mixed road marking paint conforming to IS
: 164, on bituminous surface in white/yellow shade, including cleaning
the surface of all dirt, scales, oil, grease and foreign material etc.
complete.
16.48.1 New work (Two or more coats) sqm 215.95
16.48.2 Old work (One or more coats) sqm 141.70
MISCELLANEOUS
16.49 Making bell mouth opening/ entrance of size 100x50x50 cm for
drainage pipe under footpath, including providing cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) for shape of bell mouth, including plastering providing
and fixing precast R.C.C./ S.F.R.C. slab including plastering with
cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on
exposed surface of the slab & bell mouth including centring, shuttering
& neat cement punning inside the bell mouth etc. all complete. each 2481.60
16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy
duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or
HIP (High impact polystyrene) or ABS having electronically welded
micro- prismatic lens with abrasion resistant coating as approved by
Engineer in charge. The glow stud shall support a load of 13635 kg
tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on
both sides with at least 12 cm of reflective area up each side. The
luminance intensity should be as per the specification and shall be
tested as described in ASTM I: 809 as recommended in BS: 873

No.
part 4 : 1973. The studs shall be fixed to the Road surface using the
adhesive conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of Engineer-in-charge. each 196.40
16.51 Preparation of sub-base road pavement with commercial dry lime
(slaked), fly ash stabilised soil with a mix of 3% lime, 12% fly ash and
85% local suitable soil by weight, so as to achieve minimum field C.B.R.
of 20, including mixing, rolling with road roller curing etc. all complete.
16.51.1 Minimum thickness 15 cm cum 1111.05
16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1
lime: 2 fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size), including finishing with 10mm thick cement mortar
1:3 (1 cement : 3 coarse sand) in foot paths, including preparation of
sub grade with a hand rammer, laying 10 mm thick leveling course of
fine sand (jamuna sand) and filling the joints with fine sand. cum 10802.45
16.53 Providing and fixing concertina coil fencing with punched tape
concertina coil 600 mm dia 10 metre openable length ( total length
90 m), having 50 nos rounds per 6 metre length, upto 3 m height of
wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart
and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with
G.I. staples and G.I. clips to retain horizontal, including necessary
bolts or G.I. barbed wire tied to angle iron, all complete as per direction
of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring
core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm
with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of
M.S. angle, C.C. blocks shall be paid separately) metre 290.80
16.54 Providing and laying Dense Graded Bituminous Macadam using
crushed stone aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site by
tippers, laying with paver finisher equiped with electronic sensor to
the required grade, level and alignment and rolling with smooth
wheeled, vibratory and tandem rollers as per specifications to achieve
the desired compaction and density, complete as per specificatons
and directions of Engineer-in-Charge.
16.54.1 50 to 100 mm average compacted thickness with bitumen
of grade VG-30 @ 5% (percentage by weight of total mix) and lime
filler @ 2% (percentage by weight of Aggregate) prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity. cum 10064.25
of grade VG-30 @ 5% (percentage by weight of total mix) and lime
filler @ 2% (percentage by weight of Aggregate) prepared in Drum
Type Hot Mix Plant of 60-90 TPH capacity. cum 9981.90
16.55 Providing and laying bituminous macadam using crushed stone
aggregates of specified grading premixed with bituminous binder,
transported to site by tippers, laid over a previously prepared surface
with paver finisher equiped with electronic sensor to the required
grade, level and alignment and rolling with smooth wheeled, vibratory
and tandem rollers as per specifications to achieve the desired
compaction and density, complete as per specificatons and directions
of Engineer-in-Charge.

No.

of grade VG-30 @ 3.50% (percentage by weight of total
mix) prepared in Batch Type Hot Mix Plant of 100-120
TPH capacity. cum 7743.55
of grade VG-30 @ 3.50% (percentage by weight of total
mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH
capacity. cum 7665.25
16.56 Providing and laying semi- dense Bituminous concrete using crushed
stone aggregates of specified grading, premixed with bituminous
binder and filler, transporting the hot mix to work site by tippers,
laying with paver finisher equiped with electronic sensor to the required
grade, level and alignment and rolling with smooth wheeled, vibratory
and tandem rollers to achieve the desired compaction and density
as per specification, complete and as per directions of Engineer-in-
Charge.
16.56.1 25 mm compacted thickness with bitumen of grade VG-
30 @ 5% (percentage by weight of total mix) and lime
filler @ 2% (percentage by weight of Aggregate) prepared
in Batch Type Hot Mix Plant of 100-120 TPH capacity. sqm 250.75
16.56.2 25 mm compacted thickness with bitumen of grade VG-
30 @ 5% (percentage by weight of total mix) and lime
filler @ 2% (percentage by weight of Aggregate) prepared
in Drum Type Hot Mix Plant of 60-90 TPH capacity. sqm 248.70
16.57 Providing and laying Bituminous concrete using crushed stone
aggregates of specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by tippers, laying with
paver finisher equiped with electronic sensor to the required grade,
level and alignment and rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction and density as per
specification, complete and as per directions of Engineer-in-Charge.
16.57.1 40/50 mm compacted thickness with bitumen of grade
VG-30 @ 5.5% (percentage by weight of total mix) and
lime filler @ 3% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
lime filler @ 3% (percentage by weight of Aggregate) and
waste plastic additive @ 8% (percentage by weight of
bitumen) prepared in Batch Type Hot Mix Plant of 100-
120 TPH capacity. cum 11499.40
PMB-40 @ 5.5% (percentage by weight of total mix) and

No.

CRMB-60 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of Aggregate)
prepared in drum Type Hot Mix Plant of 60-90 TPH
lime filler @ 3% (percentage by weight of Aggregate) and
waste plastic additive @ 8% (percentage by weight of
bitumen) prepared in drum Type Hot Mix Plant of 60-90
TPH capacity. cum 11415.35
PMB-40 @ 5.5% (percentage by weight of total mix)
prepared in drum Type Hot Mix Plant of 60-90 TPH
CRMB-60 @ 5.5% (percentage by weight of total mix)
prepared in Drum Type Hot Mix Plant of 60-90 TPH
16.59 Manufacturing, supplying and fixing retro reflective sign boards made
up of 2 mm thick aluminium sheet, face to be fully covered with high
intensity encapsulated type heat activated retro reflective sheeting
conforming to type - IV of ASTM-D 4956-01 in blue and silver white or
other colour combination including subject matter, message (bi-lingual),
symbols and borders etc. as per IRC ; 67:2001, pasted on substrate
by an adhesive backing which shall be activated by applying heat and
pressure conforming to class -2 of ASTM-D-4956-01 and fixing the
same with suitable sized aluminium alloy rivets @ 20 cm c/c to back
support frame of M.S. angle iron of size 25x25x3 mm along with theft
resistant measures, mounted and fixed with 2 Nos. M.S. angles of
size 35x35x5 mm to a vertical post made up to M.S. Tee section
ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at
the bottom end and including making holes in pipes, angles flats,
providing & fixing M.S. message plate of required size, steel work to
be painted with two or more coats of synthetic enamel paint of required
shade and of approved brand & manufacture over priming coat of zinc

No.
chromate yellow primer (vertical MS-Tee support to be painted in black

and white colours).Backside of aluminium sheet to be painted with
two or more coats of epoxy paint over and including appropriate priming
coat including all leads and lifts etc. complete as per drawing,
specification and direction of Engineer-in-charge.
16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre
with support length of 3750 mm each 5996.95
16.59.2 Cautionary /warning sign boards of equilateral triangular
shape having each side of 900 mm with support length of
3650 mm each 4533.85
16.60 Manufacturing, supplying and fixing retro reflective overhead signage
boards made up of 2 mm thick aluminium sheet, face to be fully
covered with high intensity and encapsulated lens type heat activated
retro reflective sheeting conforming to type - III of ASTM-D-4956-01
as approved by Engineer-in-charge, letters, borders etc. as per IRC
: 67-2001 in silver white with blue colour back ground and with high
intensity grade, pasted on substrate by pressure sensitive adhesive
backing which shall be activated by applying pressure conforming to
class II of ASTM-D-4956-01 and fixing the same to the plate of
structural frame work by means of suitable sized aluminium alloys,
rivets or bolts & nuts @ 300 mm centre to centre all along the
periphery as well as in two vertical rows along with theft resistant
measures, including the cost of painting with two or more coats of
epoxy paint in grey colour on the back side of aluminium sheet
including appropriate priming coat. The rate includes the cost of
rounding off the corners, lowering down the structural frame work
from the gantry, fixing and erecting the same in position all complete
as per drawings, specification and direction of the engineer-in-
charge.(Structural frame work including M.S. plate to be provided
separately. Rectangular area of the sheet only shall be measured for
payment).
16.60.1 Overhead informatory road signage sqm 5284.45
16.61 Providing Retro-reflective regulatory sign board of size 900 mm dia
meter made out of 2 mm thick aluminium sheet, face to be fully
covered with high intensity encapsulated lens type retro -reflective
sheeting as approved by Engineer-in-charge . Letter, symbols, borders
etc. will be as per IRC - 67 with required colour scheme on the
boards and with the high intensity grade A. The aluminium sheet to
be riveted to M.S. frame of angle iron of size 40x40x4 mm. The
boards will be fixed to 1 No. 50x50 mm square post made of M.S.
angle 50x50x4 mm, 4 m long welded to the frame with adequate
anti-theft arrangement .Sheet work to be painted with two or more
coats of synthetic enamel paint over an under coat (primer) and
back side of aluminium sheet to be painted with two or more coats of
epoxy paint including appropriate priming coat complete in all respects
as per direction of Engineer-in-charge. each 6729.90
16.62 Providing and applying 2.5 mm thick road marking strips (retro-
reflective) of specified shade/ colour using hot thermoplastic material
by fully/ semi automatic thermoplastic paint applicator machine fitted

No.
with profile shoe, glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced operator on road surface
including cost of material, labour, T&P, cleaning the road surface of
all dirt, seals, oil, grease and foreign material etc. complete as
per direction of Engineer-in-charge and accordance with applicable
specifications. sqm 607.30
16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm
thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded
stone aggregate 20 mm nominal size) over 75mm bed of dry brick
ballast 40 mm nominal size, well rammed and consolidated
and grouted with fine sand, including finishing the top smooth etc.
complete and as per direction of Engineer-in-charge. sqm 483.00
16.64 Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well
ramming, consolidating and grouting with jamuna sand, including
finishing smooth etc. complete as per direction of Engineer-in-charge. sqm 176.70
16.65 Providing and fixing post delineators made of ABS round body fitted
with 2 nos 100 mm dia high reflective reflectors and mounted on MS
pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to
be installed as per direction of Engineer-in-charge. each 714.45
16.66 Excavating holes upto 0.10 cum, including getting out the excavated
soil, then returning the soil as deported in layers not exceeding 20
cm in depth, including consolidating and deposited layer by ramming
watering etc., disposing of surplus excavated soil as directed with in
a lead of 50 mm and lift upto 1.5 m.
16.66.1 All kind of soil each 26.45
16.67 Providing and fixing at or near ground level factory made RCC
pavement slab of M-30 grade of size 450x450x50 mm, including
reinforcement with 6 mm dia M.S. bars 4 nos on each side, including
setting in position in footpath to the required level and line over a bed
of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse
sand), having joint thickness not more than 5mm except on curve,
including filling of joints with same cement mortar and making grooves
etc. complete as per direction of Engineer-in-charge. sqm 1264.65
16.68 Providing and laying 60mm thick faciory made cement concrete
interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction, of approved size, design
& shape, laid in required colour and pattern over and including 50mm
thick compacted bed of coarse sand, filling the joints with line sand
etc. all complete as per the direction of Engineer-in-charge. sqm 859.35
16.69 Providing and laying at or near ground level factory made kerb stone
of M-25 grade cement concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of
joints except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete etc. as per
direction of Engineer-in-charge (length of finished kerb edging shall
be measured for payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge). cum 8376.15

No.
16.70 Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or
nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge.
16.70.1 Made of G.I. wire of dia 4 mm sqm 797.20
16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve
outer dia not less than 5 mm in required colour and shade sqm 825.30
16.71 Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 25x25 mm made of G.I. wire of dia 3 mm including
strengthening with 2 mm dia wire or nuts, bolts and washers as
required complete as per the direction of Engineer-in-charge. sqm 909.60
16.72 Supplying and stacking of hard stone (for stone pitching) 22.5 cm
thick at site. cum 966.10
16.73 Dry stone pitching 22.5 cm thick laid in courses and required profile
with hammer dressed stones having no side less than 15 cm, with
minimum depth of 20 cm including preparing the bedding surface
etc. all complete. (Payment for Stone to be made separately). sqm 487.25
16.74 75 mm thick back filling for pitching including supplying of required
materials and consolidation etc. complete with :
16.74.1 Moorum sqm 73.90
16.74.2 Stone aggregate 20 mm nominal size sqm 162.25
16.74.3 Stone aggregate 40 mm nominal size sqm 158.15
16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed
concrete from batching plant. The ready mixed concrete shall be
laid and finished with screed board vibrator , vacuum dewatering
process and finally finished by floating, brooming with wire brush
etc. complete as per specifications and directions of Engineer-in-
charge. (The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/ recoverable
separately). cum 8663.05
16.76 Deduct for using of M-20 grade concrete instead of M-25 grade
concrete in C.C. pavement. cum 188.30
16.77 Scarifying the existing bituminous road surface to a depth of 50 mm
and disposal of scarified material within all lifts and lead upto 1km
(by mechanical means). sqm 4.75
16.78 Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at
OMC, carriage of mixed material by tippers to work site, for all leads
& lifts, spreading in uniform layers of specified thickness with motor
grader on prepared surface and compacting with vibratory power roller
to achieve the desired density, complete as per specifications and
directions of Engineer-in-Charge.
16.78.1 With material conforming to Grade-I (size range 75 mm
to 0.075 mm) having CBR Value-30 cum 2517.70

No.
16.78.2 With material conforming to Grade-II (size range 53 mm

to 0.075 mm ) having CBR Value-25 cum 2637.30
16.78.3 With material conforming to Grade-III (size range 26.5
mm to 0.075 mm ) having CBR Value-20 cum 2474.60
16.79 Providing, laying, spreading and compacting graded stone aggregate
(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)
specification including premixing the material with water at OMC in
for all leads & lifts, laying in uniform layers with mechanical
paverfinisher in sub- base / base course on well prepared surface
and compacting with vibratory roller of 8 to 10 tonne capacity to
achievethe desired density, complete as per specifications and
directions of Engineer-in-Charge. cum 2641.40
16.80 Construction of dry lean cement concrete sub base over a prepared
sub-grade with coarse and fine aggregate conforming to IS:383, the
size of coarse aggregate not exceeding 25 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per specifications, cement content not to be less than 150 Kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7
days, mixed in a batching plant, transported to site, for all leads &
lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory
roller, finishing and curing etc. complete as per direction of Engineer-
in- charge. cum 3881.85
16.81 Providing and erecting 2.00 metre high temporary barricading at site;
each panel of size 2.50mx2.00m made of 40x40x6mm angle
iron or 50x50x3mm hollow MS tube posts/horizontal members/
bracings covered with 1.63mm thick MS sheet. The sheet shall
be fixed with 30x5mm MS flat by suitable welding/riveting.
The panels shall be made so that gap of 50cm above the ground
is available making overall height as 2.5m. MS channel ISLC
75 @ 5.70 kg/m, 50cm long shall be provided at the bottom
having oval shaped holes of size 50x25mm at both ends with
50cm long MS angle 40x40x6mm bracing. Suitable
arrangement shall be made to fix the barricading to avoid
from overturning by providing 250mm long expansion fasteners
at both ends. The work shall be executed as per drawing/direction
of Engineer-in-Charge which includes writing and painting,
arrangement for traffic diversion such as traffic signals during
construction at site for day and night, glow lamps, reflective signs,
marking, flags, caution tape as directed by the Engineer-in-Charge.
The barricading provided shall be retained in position at site
continuously i/c shifting of barricading from one location to another
location as many times as required during the execution of the entire
work till its completion. Rate include its maintenance for damages,
painting, all incidentals, labour materials, equipments and works
required to execute the job. The barricading shall not be removed
without prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made for providing barricading
from start of work till completion of work i/c shifting. The barricading
provided shall remain to be the property of the contractor on completion
of the work). metre 2566.70

No.
16.82 Taking out existing kerb stones of all types from footpath/ central
verge, including removal of mortar etc., disposal of unserviceable
material to the dumping ground, for which payment shall be made
separately and stacking of serviceable material within 50 metre lead
as per direction of Engineer-in-Charge. metre 28.05
16.83 Taking out existing CC interlocking paver blocks from footpath/ central
verge, including removal of rubbish etc., disposal of unserviceable
material to the dumping ground, for which payment shall be made
separately and stacking of serviceable material within 50 metre lead
as per direction of Engineer-in-Charge. sqm 94.05
16.84 Laying old cement cocrete interlocking paver blocks of any design/
shape laid in required line, level, curvature, colour and pattern over
and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-
in-charge. (Old CC paver blocks shall be supplied by the department
free of cost). sqm 324.20
16.85 Laying at or near ground level old kerb stones of all types in position
to the required line, level and curvature, jointed with cement mortar
1:3 (1 cement : 3 coarse sand), including making joints with or without
grooves (thickness of joints, except at sharp curve, shall not be
more than 5 mm), including making drainage opening wherever
required etc. complete as per direction of Engineer-in-charge. (Length
of finished kerb edging shall be measured for payment). (Old kerb
stones shall be supplied by the department free of cost) metre 82.95
16.86 Providing and laying gang saw cut 18 mm thick, mirror polished pre
moulded and pre polished machine cut granite stone of required size
and shape of approved shade, colour and texture in footpath, flooring
cut granite stone of required size and shape of approved shade,
colour and texture in footpath, flooring in road side plazas and similar
locations, laid over 20mm thick base of cement mortar 1:4 (1cement
: 4 coarse sand) including grouting the joints with white cement
mixed with matching pigment, epoxy touch ups etc. complete as
per direction of Engineer-in-Charge.
16.86.1 With granite stone of area less than 0.50 sqm. sqm 3725.90
16.87 Providing and laying gang saw cut 30 mm thick, mirror polished pre
moulded and pre polished machine cut granite stone of required size
and shape of approved shade, colour and texture in footpath, flooring
in road side plazas and similar locations, laid over 20mm thick base
of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting
the joints with white cement mixed with matching pigment, epoxy
touch ups etc. complete as per direction of Engineer-in-Charge.
16.87.1 With granite stone of area less than 0.50 sqm. sqm 4006.85
16.88 Providing and laying matt finished vitrified tile of size 100x100x16mm
having water absorption less than 0.5% and conforming to IS: 15622
of approved make in all colours and shades in out door floors such
as footpath, court yard multi models etc., laid on 20mm thick base
of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes &
patterns including grouting the joints with white cement mixed with
matching pigments etc. complete as direction of Engineer-in-Charge. sqm 1933.75

No.
16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm
having with water absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and shades in for outdoor
floors such as footpath, court yard, multi modals location etc., laid
on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) in all shapes & patterns including grouting the joints with white
cement mixed with matching pigments etc. complete as per direction
of Engineer-in-Charge. sqm 1264.80
16.90 Providing and laying tactile tile (for vision impaired persons as per
standards) of size 300x300x9.8mm having with water absorption less
than 0.5% and conforming to IS:15622 of approved make in all colours
and shades in for outdoor floors such as footpath, court yard, multi
modals location etc., laid on 20mm thick base of cement mortar 1:4
(1 cement : 4 coarse sand) in all shapes & patterns including grouting
the joints with white cement mixed with matching pigments etc.
complete as per direction of Engineer-in-Charge. sqm 1933.75
16.91 Providing and laying factory made chamfered edge Cement Concrete
paver blocks in footpath, parks, lawns, drive ways or light traffic
parking etc, of required strength, thickness & size/ shape, made by
table vibratory method using PU mould, laid in required colour &
pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand
bedding layer through vibratory compaction by using plate vibrator,
filling the joints with sand and cutting of paver blocks as per required
size and pattern, finishing and sweeping extra sand. complete all as
16.91.1 60mm thick cement concrete paver block of M-35 grade
with approved colour, design & pattern. sqm 884.75
16.91.2 80 mm thick C.C. paver block of M-30 grade with approved
color design and pattern. sqm 953.00
16.92 Providing and fixing 10x10x7.50 cm Granite stone block hand cut and
chisel dressed on top, for paving in floors, drains etc. laid over 20mm
thick base mortar 1:4 (1 cement : 4 coarse sand) with
joints 10mm wide filled with same mortar including ruled pointing etc.
complete as per direction of engineer-in-charge. sqm 1897.95
16.93 Providing and placing in position 100 mm thick factory made machine
batched & machine mixed Precast RCC Rectangular Covers on
drains of footpath of various sizes, of M-25 grade cement concrete
for RCC work, including cost of centering, shuttering, reinforcement
of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on
both ways , neat cement punning on finished surface, properly
encased on all edges with 1.6 mm thick , 100 mm wide MS sheet
duly painted over priming coat , reinforcement to be welded at edges
with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c
cost of cartage, all leads & lift, handling at site etc. all complete as
per direction of Engineer-in-Charge. sqm 2525.35
16.94 Providing & making Gabion structure with Mechanically Woven Double
Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS
16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12

No.
(D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter

3.0 mm, mechanically edged/selvedged with partitions at every 1m
interval and shall have minimum 10 numbers of openings per meter
of mesh perpendicular to twist, tying with lacing wire of diameter
2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders
with least dimension of 200 mm, as per drawing, all complete as per
direction of Engineer-in-charge. cum 3363.70
16014:2012,MORTH Clause 2500, of required size, Mesh Type
10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC coated, Mesh
wire diameter2.7/3.7mm, mechanically edged/selvedged with
partitions at every 1m interval and shall have minimum 10 numbers
of openings per meter of mesh perpendicular to twist, tying with
lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight
of Gabion boxes, filled with boulders with least dimension of 200
mm, as per drawing, all complete as per directions of Engineer-in-
charge. cum 3584.45
16014:2012,MORTH Clause 2500, of required size, Mesh Type
10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC
coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/
selvedged with partitions at every 1m interval and shall have minimum
10 numbers of openings per meter of mesh perpendicular to twist,
tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3%
by weight of Gabion boxes, filled with boulders with least dimension
of 200 mm, as per drawing, all complete as per directions of Engineer-
in-charge. cum 4099.55

SUB HEAD : 17.0
SANITARY INSTALLATIONS
289
BASIC RATES (17.0 SANITARY INSTALLATIONS)

No.

0128 Mate day 617.00
0830 Enamel paint litre 165.00
0834 Synthetic enamel paint in all shades except black or chocolate
shade litre 160.00
1309 C.I. bracket for wash basin and sinks pair 88.00
1313 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre
long with S.S. tringular plate for Eureopean type W.C. each 200.00
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe each 67.50
1331 M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe each 30.00
1332 M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe each 27.00
1350 Mosquito proof coupling of approved design each 30.00
1369 S.C.I. gully or nahani grating 100 mm dia each 25.00
1373 Rubber insertions for 75 mm dia pipe joints each 16.00
SUB HEAD : 17.0 SANITARY INSTALLATIONS 290

No.
1392 Mirror of superior make glass 60x45 cm each 400.00
1396 Vitreous china pedestal for wash basin each 900.00
1397 Pig lead kg 176.00
1532 Flush pipe with union spreaders and clamps all in C.P. brass for
single stall each 270.00
double stall each 400.00
range of three stall each 520.00
range of four stall each 600.00
1540 Flush pipe and spreaders G.l. for single set of one squatting plate
urinal each 175.00
1541 Flush pipe and spreaders G.l. for range of two squatting plates
urinal each 250.00
1542 Flush pipe and spreaders G.l. for range of three squatting plates
urinal each 300.00
1543 Flush pipe and spreaders G.l. for range of four squatting plates
urinal each 390.00
1614 G.I. inlet connection each 60.00
1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
75 mm dia each 1050.00
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
100 mm dia each 1135.00
1620 S.C.I. plain bend 75 mm dia each 210.00
1624 S.C.I. bend with access door 75 mm dia each 240.00
1625 S.C.I. bend with access door 100 mm dia each 300.00
1627 S.C.I. plain single equal junctions 75x75x75 mm dia each 278.00
1630 S.C.I. single equal junctions 75x75x75 mm dia with access door each 320.00
1631 S.C.I. single equal junctions 100x100x100 mm dia with access
door each 405.00
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 382.00
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia each 590.00
1636 S.C.I. double equal junctions 75x75x75x75 mm dia with access
door each 500.00
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with
access door each 715.00
1639 Slotted cowl (terminal guard) 75 mm dia each 191.00

No.
1640 Slotted cowl (terminal guard) 100 mm dia each 239.00

1653 Sand cast iron S&S plain single unequal junctions: 100x100x
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia
with access door each 550.00
1659 Sand cast iron S&S plain double unequal junctions: 100x100x75x
1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm
dia with access door each 700.00
1666 Sand cast iron heel rest bend 75 mm dia each 274.00
1667 Sand cast iron heel rest bend 100 mm dia each 347.00
1669 S.C.I. single equal invert branch of required degree 75x75x75 mm dia each 320.00
1670 S.C.I. single equal invert branch of required degree 100x100x
1672 S.C.I. double equal invert branch of required degree 75x75x75x
1673 S.C.I. double equal invert branch of required degree 100x100x
100x100 mm dia each 550.00
1674 S.C.I. single unequal invert branch of required degree 100x100x
1677 S.C.I. double unequal invert branch of required degree 100x100x
75x75 mm dia each 570.00
1682 S.C.I. door pieces 75 mm dia each 283.00
1683 S.C.I. door pieces 100 mm dia each 475.00
1685 S.C.I. collar 75 mm dia each 177.00
1686 S.C.I. collar 100 mm dia each 246.00
1863 Fire clay kitchen sink: 600x450x250 mm each 1283.00
1871 White vitreous china laboratory sink 450x300x150 mm each 1500.00
1872 White vitreous china laboratory sink 600x450x200 mm each 2500.00
1875 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 400.00
1876 Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 310.00
1881 Spun yarn kg 50.00
1885 15 mm C.P. brass tap each 207.00
1889 C.P. brass toilet paper holder of standard size each 225.00
1891 C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 50 mm dia each 170.00
1893 C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 80 mm dia each 225.00
1895 C.P. brass trap 40 mm dia each 300.00
1896 100 mm S.C.I. trap with vent heel each 320.00

No.
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 271.00
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet each 218.00
1913 Vitreous china lipped front urinal each 460.00
1915 Vitreous china squatting plate urinal each 1053.00
1947 Vitreous china flat back wash basin 630x450 mm each 725.00
1949 Vitreous china angle back wash basin 600x480 mm each 725.00
1950 Vitreous china angle back wash basin 400x400 mm each 425.00
1951 C.P. brass waste 32 mm each 80.00
1952 C.P. brass waste 40 mm each 95.00
1953 Vitreous china Indian type W.C. pan of size 580 mm each 450.00
1954 Vitreous china orrisa type W.C. pan of size 580 mm each 1200.00
1955 Vitreous china pedestal type water closet each 1000.00
1965 White vitreous china dual purpose closet (Anglo Indian W.C.)
suitable for use as squatting pan or European type water closet
as per manufacturer's specifications each 2500.00
1966 Floor mounted white vitrous china double trap syphonic WC with
10 litre cistern and all fittings & fixtures,seat cover etc each 9500.00
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each 1000.00
3228 600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size each 250.00
3617 C.P. Brass union 40mm dia each 200.00
3620 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres
long:100 mm dia each 1200.00
3621 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres
3624 S.C.I. S&S bends with access door 100 mm dia each 300.00
3625 S.C.I. S&S bends with access door 75 mm dia each 250.00
3628 S.C.I. S&S bend 100 mm dia each 265.00
3629 S.C.I. S&S bend 75 mm dia each 195.00
3634 S.C.I. S&S heel rest sanitary bend 100 mm dia each 296.00
3635 S.C.I. S&S heel rest sanitary bend 75 mm dia each 250.00
3640 S.C.I. S&S single equal junctions 100x100x100 mm each 472.00
3641 S.C.I. S&S single equal junctions 75x75x75 mm each 330.00

No.
3644 S.C.I. S&S single equal junctions with access door 100x100x
100 mm each 495.00
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm each 373.00
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm each 620.00
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm each 462.00
3654 S.C.I. S&S double equal junctions with access door 100x100x
100x100 mm each 615.00
3655 S.C.I. S&S double equal junctions with access door 75x75x75x
75 mm each 480.00
3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 570.00
3664 S.C.I. S&S single unequal junctions with access door 100x100x
75 mm each 640.00
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm each 800.00
3674 S.C.I. S&S double unequal junctions with access door 100x100x
75x75 mm each 850.00
3681 S.C.I. S&S single equal invert branch of required degree 100x100x
3682 S.C.I. S&S single equal invert branch of required degree 75x75x
3685 S.C.I. S&S double equal invert branch of required degree 100x100x
100x100 mm dia each 530.00
3686 S.C.I. S&S double equal invert branch of required degree 75x75x
3690 S.C.I. S&S single unequal invert branch of required degree 100x
3695 S.C.I. S&S double unequal invert branch of required degree 100x
100x75x75 mm dia each 725.00
3699 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 225.00
3728 S.C.I. S&S door pieces 100 mm dia each 400.00
3729 S.C.I. S&S door pieces 75 mm dia each 295.00
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 264.00
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 210.00
3738 S.C.I. S&S, collars 100 mm each 279.00
3739 S.C.I. S&S, collars 75 mm each 170.00

No.

3749 Vitreous china toilet paper holder of standard size each 100.00
7005 Vitreous china 10 litres low level cistern without fittings each 715.00
7006 Vitreous china 10 litres low level cistern with fittings each 1240.00
7048 Rawl plug 50 mm (designation 10 nos) each 25.00
7072 Wall mounted water closet of size 780 x 370x690 mm each 6000.00
7073 Adjustable Vitreous China Cistern with fittings of flushing capacity
3 litre/ 6litre 9adjustibla to 4 litre/8litre) each 1900.00
7074 White Vetrious China Waterless Urinal of size 600x330x315 mm each 9650.00
7075 Cistern with fittings for Waterless Urinal each 2290.00
7076 Battery based infrared sensor operated white Vitreous Urinal of
aprox.size 610x390x370 mm each 4500.00
7095 Stainless steel kitchen sink with drain board 510 x 1040 mm
bowl depth 250 mm each 2480.00
7096 Stainless steel kitchen sink - with drain board 510 x 1040 mm
7097 Stainless steel kitchen sink - with drain board 510 x 1040 mm
7098 Stainless steel kitchen sink - with drain board 510x1040 mm
7101 Stainless steel kitchen sink - without drain board 610x510 mm
7104 Coloured Orissa pattern W.C. pan 580x440 mm each 1830.00
7105 Coloured Pedestal type W.C. pan 580x440 mm (European type) each 860.00
7106 Coloured Vitreous china 10 lit. low level cistern each 1050.00
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan each 390.00
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame each 430.00
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded frame each 290.00
7114 Oval shape 450x350 mm (outer dimensions) Mirror with Plastic
moulded frame each 340.00
7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each 670.00
7116 Hard board 6 mm thick sqm 115.00
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia
with length not less than 700 mm i/c PVC waste fittings each 25.00

No.
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia
with length not less than 700 mm i/c PVC waste fittings each 33.00
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin
32mm dia with length not less than 700 mm i/c PVC waste fittings each 35.00
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin
40 mm dia with length not less than 700 mm i/c PVC waste fittings each 35.00
7121 Bottle Trap each 620.00
7122 CP Brass Single lever telephonic wall mixer of approved make each 4500.00
7123 Coloured High density polyethylene / poly propylene 10 lit. (full flush)
capacity controlled low level flushing cistern with fittings each 550.00
7126 White Vitreous china 10 litre (full flush) capacity controlled low level
flushing cistern with all fittings each 700.00
7127 Coloured Vitreous china 10 litre (full flush) capacity controlled low
level flushing cistern with all fittings each 1150.00
7358 Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with
fittings, accessories and flush pipe) each 575.00
7359 P.V.C. automatic flushing cistern 5 litre capacity each 470.00
7361 P.V.C. automatic flushing cistern 10 litre capacity each 510.00
7363 15 mm C.P. brass tap with elbow operation lever each 430.00
7364 White glazed fire clay draining board 600x450x25 mm each 525.00
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting
pipe Single lipped urinal each 445.00
pipe Range of two lipped urinals each 765.00
7377 G.i. flush pipe and C.P. brass spreader including C.P. connecting
pipe Range of three lipped urinals each 1050.00
pipe Range of four lipped urinals each 1430.00
7379 White vitreous china clay half stall urinal flat back 580x380x350 mm
or angle back 450x375x350 mm with waste fittings as per IS:2556 each 865.00
7406 PTMT pillar cock each 125.00
7491 PTMT - Waste Coupling 31/32 mm each 34.00
7492 PTMT - Waste Coupling 38/40 mm each 48.00
7493 PTMT - Bottle Trap 31/32 mm each 210.00
7494 PTMT - Bottle Trap 38/40 mm each 220.00
7503 PTMT Liquid Soap Container of 400 ml capacity each 105.00
7504 PTMT - Towel Ring 215x200x37 mm each 130.00
7505 PTMT - Towel Rail (450 mm long ) each 135.00
7506 PTMT - Towel Rail (600 mm long) each 165.00
7507 PTMT Shelf 450x124x36 mm each 200.00
7508 PTMT - Urinal Spreader 15 mm each 76.00

No.
7621 Hubless centrifugally cast (spun) iron pipes as per IS 15905 -

100 mm dia (3000 mm length pipe) metre 700.00
7622 Hubless centrifugally cast (spun) iron pipes as per IS 15905 -
75 mm dia (3000 mm length pipe) metre 570.00
7623 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 -
100mm dia each 230.00
7624 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 -
7625 Hubless centrifugally cast (spun) iron double equal plain junction
as per IS 15905 - 100x100x100x100 mm dia each 510.00
7626 Hubless centrifugally cast (spun) iron double equal plain junction
7627 Hubless centrifugally cast (spun) iron single equal plain junction
as per IS 15905 - 100x100x100 mm dia each 400.00
7628 Hubless centrifugally cast (spun) iron single equal plain junction
7629 Hubless centrifugally cast (spun) iron double unequal plain junction
7630 Hubless centrifugally cast (spun) iron single unequal plain junction
as per IS 15905 -100x100x75 mm dia each 375.00
7631 Hubless centrifugally cast (spun) iron double equal plain invert
branch as per IS 15905 - 100x100x100x100 mm dia each 625.00
7632 Hubless centrifugally cast (spun) iron single equal plain invert branch
7633 Hubless centrifugally cast (spun) iron single equal plain invert
branch as per IS 15905 - 75x75x75 mm dia each 260.00
7634 Hubless centrifugally cast (spun) iron single unequal plain invert
branch 45 degree as per IS 15905 - 100x100x75 mm dia each 430.00
7635 Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm
dia pipe as per IS 15905 each 360.00
7639 Hubless centrifugally cast (spun) iron bend with access door -
100mm dia as per IS 15905 each 365.00
7640 Hubless centrifugally cast (spun) iron bend with access door -
75mm dia as per IS 15905 each 290.00
7641 Hubless centrifugally cast (spun) iron terminal guard (slotted
cowl) -100 mm dia as per IS 15905 each 270.00
7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and
100 mm outlet as per IS 15905 each 540.00

No.
7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet
and 75 mm outlet as per IS 15905 each 385.00
7644 SS 304 grade shielded coupling with EPDM rubber gasket for
100mm dia Hubless centrifugally cast (spun) iron each 275.00
7645 SS 304 grade shielded coupling with EPDM rubber gasket for
75 mm dia Hubless centrifugally cast (spun) iron each 250.00
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
724mm X 578 mm each 4500.00
7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X
355 mm each 1500.00
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X
345 mm each 2000.00
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each 450.00
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 500.00
7858 P.T.M.T. Urinal cock 15 mm dia each 106.50
9001 C.P. Brass Centre Hole Basin Mixer With Cast Spout each 1600.00

17.0 SANITARY INSTALLATIONS
No.
17.1 Providing and fixing water closet squatting pan (Indian type W.C.
pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests each 5421.50
17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan
of size 585x480 mm with flush pipe and integrated type
foot rests each 9836.70
17.2 Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 5260.95
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid each 5140.55
17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I. brackets,
40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 6685.00
17.3.2 W.C. pan with ISI marked black solid plastic seat and lid each 6564.60
17.4 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I clamps
making good the walls and floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic
flushing cistern each 4982.25
17.4.2 Range of two urinal basins with 5 litre white P.V.C.
automatic flushing cistern each 7677.75
17.4.3 Range of three urinal basins with 10litre white P.V.C.
17.4.4 Range of four urinal basins with 10 litre white P.V.C.

No.
17.5 Providing and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern,
with fittings, standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making good the walls
and floors wherever required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern each 9360.60
17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic
17.5.3 Range of three half stall urinals with 10 litre P.V.C.
17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic
17.6 Providing and fixing one piece construction white vitreous china
squatting plate with an integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings, standard size G.I. / PVC
flush pipe for back and front flush with standard spreader pipes with
fittings, G.I clamps and C.P. brass coupling complete, including
painting of fittings and cutting and making good the walls and floors
etc. wherever required :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing
cistern each 7240.55
17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic
17.6.3 Range of three squatting plates with 10 litre P.V.C.
17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with
a pair of 15 mm C.P. brass pillar taps each 3087.70
a single 15 mm C.P. brass pillar tap each 2751.30
a pair of 15 mm C.P. brass pillar taps each 2846.90
17.7.4 White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap each 2510.45
17.7.5 White Vitreous China Angle back wash basin size 600 x
480 mm with single 15mm C.P. brass pillar tap each 2751.30
17.7.6 White Vitreous China Angle back wash basin size 400 x
400 mm with single 15 mm C.P. brass pillar tap each 2349.90

No.
17.7.7 White Vitreous China Flat back wash basin size 450x
300 mm with single 15mm C.P. brass pillar tap each 2196.05
17.7.8 White Vitreous China Surgeon type wash basin of size
660x460 mm with a pair of 15 mm C.P. brass pillar taps
with elbow including operated levers each 4052.35
17.7.9 White Vitreous China Surgeon type wash basin of size
660x460 mm with single 15 mm C.P. brass pillar taps
with elbow operated levers ISI Marked each 3417.55
17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm
with single 15 mm C.P. brass pillar tap each 3788.20
17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm
with single 15 mm C.P. brass pillar tap each 4457.15
17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP
Brass single hole basin mixer of approved quality and make, including
wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer each 4403.80
17.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT
pillar cock, 32 mm PTMT waste coupling of standard pattern, including
wherever required. White Vitreous China Flat back wash basin size
550x400 mm with single 15 mm PTMT pillar cock. each 2398.70
17.8 Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings. each 1420.15
17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain
with rubber plug, 40 mm C.P. brass waste complete, including painting
the fittings and brackets, cutting and making good the walls wherever
required:
17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm each 3163.25
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS:13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good
the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.1 510x1040 mm bowl depth 250 mm each 5155.95
17.10.2 Kitchen sink without drain board

No.
17.11 Providing and fixing white vitreous china laboratory sink with C.I.
brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste
and 40mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good
the wall wherever required :
17.11.1 Size 450x300x150 mm each 4122.55
17.11.2 Size 600x450x200 mm each 5460.45
17.12 Providing and fixing draining board with C.I. brackets including painting
of brackets, cutting and making good the walls wherever required :
17.12.1 White glazed fire clay draining board of size 600x450x
25 mm each 1337.80
17.13 Providing and fixing white vitreous china water closet squatting pan
(Indian type) :
17.13.1 Long pattern W.C. pan of size 580 mm each 1541.05
17.13.2 Orissa pattern W.C. pan of size 580x440 mm each 2544.50
17.14 Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1 Orissa pattern W.C. pan 580x440 mm each 842.90
17.15 Providing and fixing white vitreous china pedestal type (European
type/ wash down type) water closet pan. each 2276.95
17.16 Extra for using coloured pedestal type W.C pan (European type)
with low level cistern of same colour instead of white vitreous china
W.C pan and cistern. each 260.90
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge. each 297.55
17.17 Providing and fixing a pair of white vitreous china foot rests of standard
pattern for squatting pan water closet :
17.17.1 250x130x30 mm pair 214.60
17.17.2 250x125x25 mm pair 214.60
17.18 Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings
and fixtures complete.
17.18.1 10 litre capacity - White each 999.95
17.18.2 10 litre capacity - coloured each 971.40
17.19 Providing and fixing controlled flush, low level cistern made of vitreous
china with all fittings complete.
17.19.1 10 litre (full flush) capacity-white each 1839.70
17.19.2 10 litre (full flush) capacity-coloured each 2441.80
17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete :
17.20.1 White solid plastic seat with lid each 571.00
17.20.2 Black solid plastic seat with lid each 450.60
17.20.3 Coloured (other than black & white) solid plastic seat
with lid each 557.65
No.
17.22 Providing and fixing G.I. inlet connection for flush pipe connecting
with W.C. pan. each 116.10
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make and as per the direction of Engineer-in-charge. each 883.05
17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of
quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia each 6113.60
17.23 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm or 340x410x265 mm
sizes respectively. each 1299.75
17.24 Providing and fixing white vitreous china squatting plate urinal with
integral rim longitudinal flush pipe. each 3207.50
17.25 Providing and fixing white vitreous china wash basin including making
all connections but excluding the cost of fittings :
17.25.1 Flat back wash basin of size 630x450 mm each 1139.40
17.25.3 Angle back wash basin of size 600x480 mm each 1139.40
17.25.4 Angle back wash basin of size 400x400 mm each 738.05
17.25.6 Surgeon type wash basin of size 660x460 mm each 1507.35
17.26 Providing and fixing kitchen sink including making all connections
excluding cost of fittings.
17.26.1 White glazed fire clay sink of size 600x450x250 mm each 1853.65
17.27 Providing and fixing white vitreous china laboratory sink including
making all connections excluding cost of fittings :
17.27.1 Size 450x300x150 mm each 2143.95
17.27.2 Size 600x450x200 mm each 3481.90
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia each 87.70
17.28.1.2 40 mm dia each 98.40
17.28.2 Flexible pipe
17.28.2.1 32 mm dia each 101.10
17.28.2.2 40 mm dia each 101.10
17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. each 44.60
17.30 Providing and fixing in position 25 mm diameter mosquito proof
coupling of approved municipal design. each 45.00
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete. each 1283.05

No.
17.32 Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved
make and shade with 6 mm thick hard board backing :
17.32.1 Circular shape 450 mm dia each 1242.00
17.32.2 Rectangular shape 453x357 mm each 1120.25
17.32.3 Oval shape 450x350 mm (outer dimensions) each 1185.60
17.32.4 Rectangular shape 1500x450 mm each 1786.55
17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete. each 841.80
17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass each 583.75
17.34.2 Vitreous china each 426.15
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1 100 mm dia
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 metre 1008.20
17.35.1.2 Centrifugally cast (spun) iron socket &
spigot (S&S) pipe as per IS: 3989 metre 1092.20
17.35.1.3 Hubless centrifugally cast (spun) iron
pipes epoxy coated inside & outside
IS:15905 metre 1051.75
17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 metre 923.25
17.35.2.2 Centrifugally cast (spun) iron socketed pipe
as per IS: 3989 metre 992.05
IS:15905 metre 859.55
17.36 Providing and filling the joints with spun yarn, cement slurry and
cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
17.36.1 75 mm dia pipe each 126.00
17.36.2 100 mm dia pipe each 148.45
17.37 Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
17.37.1 For 100 mm dia pipe each 287.45
17.37.2 For 75 mm dia pipe each 283.40

No.
17.38 Providing and fixing bend of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete.
17.38.1 100 mm dia
17.38.1.1 Sand cast iron S&S as per IS - 1729 each 461.65
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:15905 each 548.60
17.38.2 75 mm dia
17.38.2.2 Sand cast iron S&S as per IS- 3989 each 384.75
17.39 Providing and fixing plain bend of required degree.
17.39.1 100 mm dia
17.39.1.2 Sand cast iron S&S as per IS : 3989 each 390.75
17.39.1.3 Hubless centrifugally cast (spun) iron pipes
epoxy coated inside & outside IS:15905 each 343.90
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS -1729 each 309.85
17.39.2.3 Hubless centrifugally cast (spun) iron pipes
epoxy coated inside & outside IS:15905 each 242.95
17.40 Providing and fixing heel rest sanitary bend
17.40.1 100 mm dia
17.40.2 75 mm dia
17.41 Providing and fixing double equal junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.41.1 100x100x100x100 mm
17.41.2 75x75x75x75 mm

No.
17.42 Providing and fixing double equal plain junction of required degree.
17.42.1 100x100x100x100 mm
IS:15905 each 718.55
17.42.2 75x75x75x75 mm
IS:15905 each 396.80
17.43 Providing and fixing single equal plain junction of required degree
with access door, insertion rubber washer 3 mm thick, bolts and
nuts complete.
17.43.1 100x100x100 mm
17.43.2 75x75x75 mm
17.44 Providing and fixing single equal plain junction of required degree :
17.44.1 100x100x100 mm
epoxy coated inside & outside as per
IS:15905 each 571.35
17.44.2 75x75x75 mm
17.45 Providing and fixing double unequal junction of required degree with
complete:
17.45.1 100x100x75x75 mm

No.
17.46 Providing and fixing double unequal plain junction of required

degree :
17.46.1 100x100x75x75 mm
17.47 Providing and fixing single unequal junction of required degree with
complete :
17.47.1 100x100x75 mm
17.48 Providing and fixing single unequal plain junction of required
degree :
17.48.1 100x100x75 mm
17.49 Providing and fixing double equal plain invert branch of required degree:
17.49.1 100x100x100x100 mm
17.49.1.2 Sand cast iron S&S as per IS 3989 each 745.30
17.49.2 75x75x75x75 mm
17.50 Providing and fixing single equal plain invert branch of required
degree :
17.50.1 100x100x100 mm
17.50.1.1 Sand cast iron S&S as per iron 1729 each 584.75
17.50.2 75x75x75 mm

No.
17.51 Providing and fixing double unequal invert branch of required

degree :
17.51.1 100x100x75x75 mm
17.52 Providing and fixing single unequal plain invert branch of required
degree :
17.52.1 100x100x75 mm
17.53 Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1 76 mm off sets
17.53.1.1 With 75 mm dia pipe each 320.55
17.53.2 114 mm off sets
17.53.3 152 mm off sets
17.53A Providing and fixing Hubless centrifugally cast iron offsets epoxy
coated inside & outside as per IS:15905
17.53A.1 65 mm offsets
17.53A.1.1 With 100 mm dia pipe each 510.55
17.53A.1.2 With 75 mm dia pipe each 423.55
17.54 Providing and fixing sand cast iron S&S off sets as per IS: 3989 :
17.54.1 75 mm off sets
17.54.2 150 mm off sets
17.54A Providing and fixing Hubless centrifugally cast iron offsets epoxy
coated inside & outside as per IS:15905
17.54A.1 130 mm offsets
17.54A.1.1 With 100 mm dia each 624.85
17.54A.1.2 With 75 mm dia each 443.65

No.
17.55 Providing and fixing door piece, insertion rubber washer 3mm thick,
bolts & nuts complete :
17.55.1 100 mm
17.55.2 75 mm
17.56 Providing and fixing terminal guard :
17.56.1 100 mm
17.56.2 75 mm
17.57 Providing and fixing collar :
17.57.1 100 mm
17.57.2 75 mm
17.57A Providing and fixing shielded coupling for Hubless centrifugally cast
iron pipe
17.57A.1 100 mm dia
17.57A.1.1 SS 304 grade coupling with EPDM rubber
gasket each 404.10
17.57A.2 75 mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber
gasket each 363.35
17.58 Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter :
17.58.1 100 mm each 481.45
17.58.2 75 mm each 407.90
17.58.3 50 mm each 329.50

No.
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter :
17.59.1 100 mm each 126.50
17.59.2 75 mm each 78.40
17.59.3 50 mm each 72.20
17.60 Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors :
17.60.1 100 mm inlet and 100 mm outlet
17.60.1.1 Sand cast iron S&S as per IS: 3989 each 1512.55
17.60.1.2 Sand Cast Iron S&S as per IS: 1729 each 1273.05
17.60.2 100 mm inlet and 75 mm outlet
17.60.2.2 Sand Cast Iron S&S as per IS- 1729 each 1202.15
17.61 Cutting chases in brick masonry walls for following diameter sand
cast iron/centrifugally cast (spun) iron pipes and making good the
same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6
graded stone aggregate 12.5 mm nominal size), including necessary
plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse
sand) :
17.61.1 100 mm dia metre 555.30
17.61.2 75 mm dia metre 398.70
17.61.3 50 mm dia metre 259.05
17.62 Painting C.I. cistern with bitumastic or any other anti-corrosive paint
inside and white paint over a coat of zinc chromate yellow primer (of
approved quality ) on the outside surface of the cistern, flush pipe,
other fittings, etc. complete for new work. each 768.15
17.63 Re-painting C.I. cistern with bitumastic or any other anti-corrosive
paint inside and white paint on the outside surface of the cistern,
flush pipe, other fittings, etc. complete, including polishing of wooden
seat and lid and cleaning of W.C. pan with acid wherever necessary. each 516.35
17.64 Repainting C.I. cistern with synthetic enamel paint of approved colour,
brand and manufacture on the outside surface of cistern, flush pipe,
other fittings etc. complete. each 223.90

No.
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste
vent pipes and fittings with two coats of synthetic enamel paint of
any colour such as chocolate grey, or buff etc. over a coat of primer
(of approved quality) for new work :
17.65.1 100 mm diameter pipe metre 64.20
17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil,
waste, vent pipes and fittings with one coat of synthetic enamel
paint of any colour such as chocolate, grey or buff etc :
17.67 Repainting bath tub of size 1700x730x430 mm with enamel paint. each 630.55
17.68 Providing and fixing vitreous china dual purpose closet suitable for
use as squatting pan or European type water closet (Anglo Indian
W.C pan) with seat & lid fixed with C.P. brass hinges and rubber
buffers, 10 litre low level flushing cistern with fitting and brackets, 40
mm flush bend, 20 mm over flow pipe, with specials of standard
make and mosquito proof coupling of approved municipal design
making good the walls and floors wherever required:
17.68.1 White vitreous china dual purpose WC pan with white
solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend. each 10023.90
17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm
breadth weighing not less than 45 gms each 99.75
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms each 118.50
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1 Bottle trap 31mm single piece moulded with height of
270 mm, effective length of tail pipe 260 mm from the
centre of the waste coupling, 77 mm breadth with 25 mm
minimum water seal, weighing not less than 260 gms each 335.25
17.70.2 Bottle trap 38 mm single piece moulded with height of
270 mm, effective length of tail pipe 260 mm from the
centre of the waste coupling, 77 mm breadth with 25 mm
minimum water seal, weighing not less than 263 gms each 348.60
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms. each 158.55

No.
17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,
200 mm wide with minimum distances of 37 mm from wall face with
concealed fittings arrangement of approved quality and colour,
weighing not less than 88 gms. each 228.20
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm,
78 mm wide and effective height of 88 mm, weighing not
less than 170 gms each 555.35
17.73.2 600 mm long towel rail with total length of 645 mm, width
78 mm and effective height of 88 mm, weighing not less
than 190 gms. each 595.50
17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36
mm height of approved quality and colour, weighing not less than
300 gms. each 642.30
17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100
mm with 1/2" BSP thread and shapes, weighing not less than 60
gms. each 119.75
17.76 Providing and fixing PTMT urinal cock of approved quality and colour.
17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm
wide with BSP female threads weighing not less than 48
gms each 164.05
17.77 Providing and fixing M.S. holder bat clamp of approved design to
sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets
made of 50x5 mm flat of specified shape, projecting 75 mm outside
the wall surface and fixed on wall with 4nos, 6mm dia expansion
hold fasteners, including drilling necessary holes in brick wall/ CC/
RCC surface and the cost of bolts etc. The pipes shall be fixed to the
already fixed brackets with the help of 30 mm x1.6 mm galvanised
M.S. flats of specified shape and of total length 420 mm and shall be
fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts
on each side of the pipe.
17.77.1 Total bracket length 580 mm of approved shape and design
(for single 100 mm dia pipe) each 247.80
17.77.2 Total bracket length 810 mm of approved shape and design
(for two 100 mm dia pipes) each 302.35
17.77.3 Total bracket length 1040 mm of approved shape and
design (for three 100 mm dia pipes) each 356.70
17.78 Providing and fixing white vitreous china extended wall mounting
water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting,
of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),
including seat cover, and cistern fittings, nuts, bolts and gasket etc

No.
17.79 Providing & fixing white vitreous china water less urinal of size 600 x
330 x 315 mm having antibacterial /germs free ceramic surface,
fixed with cartridge having debris catcher and hygiene seal. each 16868.15
17.80 Providing and fixing white vitreous china battery based infrared sensor
operated urinal of approx. size 610 x 390 x 370 mm having pre &
post flushing with water (250 ml & 500 ml consumption), having
water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of
Engineer-in-charge. each 6913.90
17.81 Providing and fixing floor mounted, white vitreous china single piece,
double traps syphonic water closet of approved brand/make, shape,
size and pattern including integrated white vitreous china cistern of
capacity 10 litres with dual flushing system, including all fittings and
fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc
including making connection with the existing P/S trap, complete in
all respect as per directions of Engineer-in-Charge. each 15457.95

SUB HEAD : 18.0
WATER SUPPLY
314
BASIC RATES (SH: 18.0 WATER SUPPLY)
No.
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 800.00
0010 Hire charges of derrick monkey rope day 750.00
0593 C.P. Brass Extension Nipple (1/2"x2" size) each 40.00
1301 Bleaching powder quintal 1800.00
1304 Surface box for stop cock each 125.00
1305 Surface box for sluice valve each 210.00
1307 Surface box for water meter each 250.00
1339 Brass bib-cock 15 mm dia each 210.00
1340 Brass bib-cock 20 mm dia each 225.00
1342 Brass stop-cock 15 mm dia each 210.00
1343 Brass stop-cock 20 mm dia each 225.00
1360 C.I. mouth, brass ferrule 15 mm dia each 140.00
1361 C.I. mouth, brass ferrule 20 mm dia each 160.00
1362 C.l. mouth, brass ferrule 25 mm dia each 220.00
1397 Pig lead kg 176.00
1464 S & S.C.I. standard specials upto 300 mm dia (heavy class) quintal 3600.00
1466 S & S.C.I. standard specials over 300 mm dia (heavy class) quintal 3700.00
SUB HEAD : 18.0 WATER SUPPLY 315

No.
1468 Flanged C.I. standard specials upto 300 mm dia (heavy class) quintal 5500.00
1470 Flanged C.I. standard specials over 300 mm dia (heavy class) quintal 5500.00
1472 Casing pipe 100 mm dia metre 335.00
1545 G.I. pipes 15 mm dia metre 91.00
1555 G.I. back (jam) nuts 25 mm dia each 15.00
1559 G.I. back (jam) nuts 65 mm dia each 25.00
1608 G.I. tees (equal) 25 mm each 50.00
1612 G.I. tees (equal) 65 mm each 452.00
1641 G.I. Union 15 mm nominal bore each 30.00
1649 Polyethylene water storage tank with cover and suitable locking
arrangement per litre 5.50
1687 Unplasticised P.V.C. connection pipe with brass union 30 cm long
15 mm bore each 30.00
1693 S.C.I. hand pump each 670.00
1878 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia each 100.00
1879 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia each 125.00
1882 Strainer brass 40 mm dia 1.5 metre long each 600.00
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 210.00

No.
1926 20 mm dia Gunmetal gate valve with wheel each 325.00
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 350.00
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 330.00
1940 C.I. sluice valve (with caps) class I: 100 mm dia each 2410.00
1941 C.I. sluice valve (with caps) class I : 125 mm dia each 2600.00
1956 Bolts and nuts 16 mm dia 60 mm long each 11.00
2271 Carriage of G.I. pipes below 100 mm dia tonne 92.24
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 92.24
2309 Carriage of Cast Iron fittings tonne 92.24
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 226.82

No.
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 3780.28
2330 Carriage of C.I. pipes 500 mm dia 100 metre 2520.19
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 5670.42
2335 Carriage of sand cum 103.77
2341 Carriage of Pig lead tonne 92.24
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 226.82
2344 Carriage of Cast iron pipes 150 mm dia 100 metre 378.03
3080 Gunmetal non-return valve - vertical (screwed end) 25 mm dia each 350.00
3311 C.I. sluice valve (with caps) class II : 100 mm dia each 2700.00

No.
3327 15 mm Battery Based Sensor Pillar Cock each 5800.00
7257 C.P. Brass bibcock 15 mm each 290.00
7258 C.P. Brass long nose bibcock 15 mm each 430.00
7259 C.P. Brass long body bibcock 15 mm each 385.00
7260 C.P. Brass stop cock (concealed) 15 mm each 430.00
7261 C.P. Brass angle valve 15 mm each 375.00
7400 15 mm PTMT bib cock each 71.00
7401 15 mm PTMT bib cock with flange (fancy) each 105.00
7402 15 mm PTMT bib cock long body with flange each 116.00
7403 15 mm dia PTMT stop cock (male thread) each 71.00
7405 20 mm dia PTMT stop cock each 97.00
7406 PTMT pillar cock each 125.00
7407 PTMT push cock 15 mm dia each 62.00
7408 PTMT push cock 12 mm dia 20 mm BSP each 57.00
7409 PTMT grating 100 mm dia each 20.00
7410 PTMT Pillar cock (fancy) 15 mm foam flow each 138.00
7411 125 mm grating with waste hole each 30.00
7412 Rectangular type with openable circular lid 150 mm size 18 mm
high with 100 mm dia (110 gm) each 118.00
7415 Double acting air valve 50 mm each 3715.00
7418 Water meter (including testing charges) 80 mm each 2030.00
7422 Dirt box strainer 80 mm each 2680.00
7495 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 100.00

No.
7500 PTMT Angle Stop cock with Flange 15 mm each 100.00
7501 PTMT Swiveling shower 15 mm each 70.00
7509 PTMT Soap Dish/Holder 138x102x75 mm each 84.00
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia metre 765.00
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia metre 1150.00
7655 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia metre 2750.00
7660 Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia metre 7560.00
7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia each 29.00

No.
7682 Ductile Iron K - 12 specials suitable for push on jointing up to
600 mm dia quintal 12400.00
7683 Ductile Iron K - 12 specials suitable for push on jointing over
600 mm dia quintal 17200.00
7684 Ductile Iron specials suitable for mechanical jointing as per
I.S. 9523 - up to 600 mm dia quintal 13050.00
7685 Ductile Iron Specials suitable for mechanical jointing as per
I.S. 9523 over 600 mm dia quintal 18750.00
7686 Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia metre 1100.00
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia metre 857.00
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable
for lead jointing up to 300 mm dia quintal 5190.00
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable
for lead jointing over 300 mm dia quintal 6200.00
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical
joint as per I.S. 13382 up to 300 mm dia quintal 8571.00
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical
joint as per I.S. 13382 over 300 mm dia quintal 9048.00

No.
7712 Screwed double flanged centrifugally cast (spun) C.I. Pipe of

Class B conforming to I.S. 1536, - 100 mm dia metre 1310.00
7720 Screwed double flanged centrifugally cast (spun) C./. Pipe of
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia metre 800.00
7726 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 300 mm dia metre 2250.00
7727 Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 350 mm dia metre 2650.00
7859 P.T.M.T. Bib cock with nozzle 15 mm each 154.50
7861 P.T.M.T. Stop cock (concealed) 15 mm each 133.50
7862 15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts each 46.50
7863 15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts each 57.00
7864 P.T.M.T. extension nipple 15 mm dia each 30.00

No.

8300 1216 mm PE-AL-PE Composite pressure pipe metre 62.00
8306 PPR Union 20 mm each 48.00
8626 Poly propylene- Random - Co - Polymer (PPR) pipes PN-16
(SDR 7.4) - 20 mm Outer dia metre 43.27
(SDR 11) - 50 mm Outer dia metre 252.22
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia metre 48.55

No.
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner dia metre 793.30
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia metre 1031.05
8701 SS pipe 304 grades with press fit technology as per JIS 3448
standard 48.60 mm outer dia metre 610.00
8702 Coupling/Socket fittings for 15.88 mm outer dia SS pipe each 59.00
8791 Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe each 103.00
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 410.00
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 47.00

No.
8812 Elbow 90° for 15.88 mm outer dia SS pipe each 58.00
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS pipe each 148.00
8824 Equal Tee for 15.88 mm outer dia SS pipe each 159.00
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 179.00
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 273.00
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 887.00

No.
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 887.00
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm
nominal dia threaded each 179.00
nomina dia threaded each 200.00
nomina dia threaded each 273.00

No.
8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 mm
8887 Stainless steel Female threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded each 190.00

No.

8899 Stainless steel Male threaded Connector/Adapter for 15.88 mm

No.
8910 Stainless steel Valve Connector for 15.88 mm outer dia X 15 mm

8917 SS Female Threaded Elbow 90o for 15.88 mm outer dia X 15 mm
8918 Stainless steel Female Threaded Elbow 90o for 22.22 mm
outer dia X 15 mm nominal dia threaded each 191.00
outer dia X40 mm nominal dia threaded each 478.00
8926 Stainless steel Male Threaded Elbow 90o for 15.88 mm
8927 Stainless steel Male Threaded Elbow 90o for 22.22 mm
8928 Stainless steel Male Threaded Elbow 900 for 22.22 mm
8930 Stainless steel MaleThreaded Elbow 900 for 34.00 mm

No.

8936 Stainless steel Cap for 15.88 mm outer dia pipe each 45.00
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 214.00

18.0 WATER SUPPLY
No.
PE-AL-PE COMPOSITE PRESSURE PIPE
18.1 Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-
PE Composite Pressure Pipes conforming to IS - 15450, U.V.
stabilized with carbon black having thermal stability for hot & cold
water supply, capable to withstand temperature up to 80°C, including
all special fittings of composite material (engineering plastic blend
and brass inserts wherever required) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes testing of joints complete as per direction of the
Engineer-in-charge.
INTERNAL WORK - EXPOSED ON WALL
18.1.1 1216 (16 mm OD) pipe metre 250.40
18.1.2 1620 (20 mm OD) pipe metre 292.75
18.1.3 2025 (25 mm OD) pipe metre 362.95
18.1.4 2532 (32 mm OD) pipe metre 468.95
18.1.5 3240 (40 mm OD) pipe metre 659.55
18.1.6 4050 (50 mm OD) pipe metre 824.80
18.2 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-
couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes the costs of cutting chases and including testing of
joints complete as per direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall
etc.
18.2.1 1216 (16 mm OD) pipe metre 441.15
18.2.2 1620 (20 mm OD) pipe metre 478.60
18.2.3 2025 (25 mm OD) pipe metre 553.50
18.2.4 2532 (32 mm OD) pipe metre 663.55
18.3 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-
couplers & connectors etc., with trenching, refilling and testing of
joints complete as per direction of the engineer in charge.
External work
18.3.1 1216 (16 mm OD) pipe metre 226.25

No.
18.3.2 1620 (20 mm OD ) pipe metre 254.05

18.3.3 2025 (25 mm OD ) pipe metre 309.70
18.3.4 2532 (32 mm OD ) pipe metre 391.45
18.3.5 3240 (40 mm OD ) pipe metre 547.70
18.3.6 4050 (50 mm OD ) pipe metre 712.95
PP-R PIPES
18.4 Providing and fixing 3 layer PP-R (Poly propylene Random
copolymer) pipes confirming to IS 15801, UV stabilized & anti
- microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes testing of joints complete as
Internal Exposed on walls
18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) metre 232.35
18.4.5 PN - 10 Pipe, 50mm OD (SDR-11) metre 638.90
copolymer) pipes confirming to IS:15801, UV stabilized & anti
- microbial fusion welded, having thermal stability for hot &
cold water supply, including all PP - R plain & brass threaded
polypropylene random fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes the cost of cutting chases and
making good the same including testing of joints complete as
Concealed work,including cutting chases and making good
the wall etc.
copolymer) pipes confirming to IS:15801 UV stabilized & anti -
microbial fusion welded, having thermal stability for hot & cold
water supply, including all PP - R plain & brass threaded
polypropylene random fittings, including trenching, refilling &
testing of joints complete as per direction of Engineer-in-Charge.
External work
18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) metre 236.30

No.
18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) metre 543.95

18.6A Providing and fixing PPR Unions
18.6A.1 PPR Union 20mm each 259.85
C.P.V.C. PIPES
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.1 15 mm nominal outer dia Pipes metre 241.55
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls
etc.

No.
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.
External work
18.9.7 62.50 mm nominal inner dia Pipes metre 1552.30
18.9.8 75 mm nominal inner dia Pipes metre 1965.85
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
Internal work - Exposed on wall
18.10.1 15 mm dia nominal bore metre 284.90
18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,
i/c making good the walls etc. concealed pipe, including painting
with anti corrosive bitumastic paint, cutting chases and making good
the wall :
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
External work

No.

18.13 Making connection of G.I. distribution branch with G.I. main of following
sizes by providing and fixing tee, including cutting and threading the
pipe etc. complete :
18.13.1 25 to 40 mm nominal bore each 673.45
18.13.2 50 to 80 mm nominal bore each 1432.75
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost
of water meter and stop cock to be paid separately). each 606.55
BRASS FITTINGS
18.15 Providing and fixing brass bib cock of approved quality :
18.15.1 15 mm nominal bore each 302.55
18.16 Providing and fixing brass stop cock of approved quality :
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1A 20 mm nominal bore each 460.20
18.17.2 32 mm nominal bore. each 581.25
18.18 Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.1 25 mm nominal bore
18.19.1.1 Horizontal each 477.70
18.19.1.2 Vertical each 504.45

No.

18.19.4.2 Vertical each 1251.10
18.19.5.2 Vertical each 2057.35
18.19.6.2 Vertical each 3399.10
18.20 Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main :
18.21 Providing and fixing uplasticised PVC connection pipe with brass
unions :
18.21.1 30 cm length
18.21.1.1 15 mm nominal bore each 72.85
18.21.2 45 cm length
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.1 100 mm diameter each 151.90
18.22.2 150 mm diameter each 188.80
C.I./DUCTILE IRON PIPES & SPECIALS
18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes
(excluding cost of pipe). quintal 264.25
18.24 Laying in position S&S or flanged C.I. special such as tees, bends,
collars, tapers and caps etc.(excluding cost of specials). quintal 491.50
18.25 Providing and laying S&S C.I. standard specials such as tees, bends,
collars, tapers, caps etc. (Heavy class):
18.25.1 Up to 300 mm dia quintal 5320.40
18.25.2 Over 300 mm dia quintal 5454.20

No.
18.26 Providing and laying flanged C.I. standard specials such as tees,
bends, collars, tapers, caps etc., suitable for flanged jointing as per
IS : 1538 :
18.26.2 Over 300 mm dia quintal 7862.50
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class
LA) conforming to IS - 1536 :
18.27.1 100 mm dia pipe metre 1201.95
18.27.2 125 mm dia pipe metre 1499.80
18.27.3 150 mm dia pipe metre 1810.75
18.27.4 200 mm dia pipe metre 3062.75
18.27.5 250 mm dia pipe metre 4002.00
18.27.6 300 mm dia pipe metre 5391.05
18.27.7 350 mm dia pipe metre 6472.60
18.27.8 400 mm dia pipe metre 8513.95
18.27.9 450 mm dia pipe metre 10308.85
18.27.10 500 mm dia pipe metre 11969.15
18.27.11 600 mm dia pipe metre 16722.75
18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials,
including testing of joints but excluding the cost of pig lead :
18.28.1 100 mm diameter pipe each 374.80
18.29 Supplying pig lead at site of work. quintal 23560.05
18.30 Providing flanged joints to double flanged C.I./ D.I. pipes and specials,
including testing of joints :

No.

C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES
18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,
nuts, rubber insertions etc. (the tail pieces if required will be paid
separately) :
18.31.1 100 mm diameter
18.31.1.1 Class I each 3977.60
18.31.1.2 Class II each 4426.05
18.31.2.1 Class I each 4318.95
18.31.2.2 Class II each 5182.20
18.31.3.1 Class I each 5836.60
18.31.3.2 Class II each 6442.35
18.31.4.1 Class I each 11357.75
18.31.4.2 Class II each 13376.85
18.31.5.1 Class I each 16566.40
18.31.5.2 Class II each 21527.85
18.31.6.1 Class I each 22942.10
18.31.6.2 Class II each 26861.85
18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in
cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.
surface box 100x100 x75 mm (inside) with hinged cover fixed in cement
concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), i/c necessary excavation, foundation
concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate
40mm nominal size ) and inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12mm thick, finished with a floating coat of
neat cement complete as per standard design :
18.32.1 With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5 each 1582.45

No.
18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100 mm top diameter, 160 mm bottom diameter
and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size ), i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size ) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :
18.35 Constructing masonry Chamber 120x120x100 cm inside, in brick
work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice
valve, with C.I. surface box 100 mm top diameter, 160 mm bottom
diameter and 180 mm deep ( inside) with chained lid and RCC top
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) , i/c necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with cement mortar 1:3 (1 cement
: 3 coarse sand) 12 mm thick, finished with a floating coat of neat
cement complete as per standard design :
18.36 Constructing masonry Chamber 60x60x75 cm, inside in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants,
with C.I. surface box 350x350 mm top and 165 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10
graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,
finished with a floating coat of neat cement complete as per standard
design :

No.

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter
complete with C.I. double flap surface box 400x200x200 mm (inside)
with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c
necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5
fine sand:10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as
per standard design :
18.38 Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work :
18.39 Repainting G.I. pipes and fittings with synthetic enamel white paint
with one coat of approved quality :
18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive
bitumastic paint of approved quality :

No.
18.41 Providing and filling sand of grading zone V or coarser grade, allround
the G.I. pipes in external work :
18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell,
in all soils except ordinary hard rocks requiring blasting, including
removing the casing pipe after the hand pump / tube well is lowered
and tested :
18.42.1 Up to 6 metres depth metre 554.20
18.42.2 Beyond 6 m and up to 12 m depth metre 656.20
18.42.3 Beyond 12 m and up to 18 m depth metre 761.55
18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe
with brass strainer of approved quality. metre 768.55
18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I.
pipe for tube well including cleaning and priming the tube well. metre 433.95
18.45 Providing and placing in position hand pump of approved quality for
40 mm diameter G.I. pipe complete with all accessories. each 1117.80
18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading
the pipe and making long screws etc. complete (New work) :
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and
threading the pipe and making long screws, including excavation,
refilling the earth or cutting of wall and making good the same complete
wherever required :

No.

18.48 Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank. per litre 8.80
18.48A Providing and fixing rectangular high density polyethylene water
storage loft tank with cover, conforming to ISI : 12701, colour of
opaque white or as approved by Engineer-in-charge. The rate includes
making necessary holes for inlet, outlet & over flow pipes. The base
support i/c fittings & fixtures for tank shall be paid separately. per litre 8.80
C.P. BRASS FITTINGS
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 :
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
18.53.1 15mm nominal bore each 532.00
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)
of approved make and quality as per direction of Engineer-in-charge. each 61.25
PTMT FITTINGS
18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than
88 gms each 116.55
18.54.2 15 mm nominal bore, 122mm long, weighing not less
than 99 gms each 162.05
18.54.3 15 mm nominal bore, 165 mm long, weighing not less

No.

18.55 Providing and fixing PTMT stop cock of approved quality and colour.
18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm
long, weighing not less than 108 gms each 200.20
18.56 Providing and fixing PTMT pillar cock of approved quality and colour.
18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing
not less than 120 gms each 210.05
18.57 Providing and fixing PTMT, push cock of approved quality and colour.
18.58 Providing and fixing PTMT grating of approved quality and colour.
18.58.1 Circular type
18.58.1.1 100 mm nominal dia each 37.90
18.58.1.2 125 mm nominal dia with 25 mm waste hole each 51.25
18.58.2 Rectangular type with openable circular lid
18.58.2.1 150 mm nominal size square 100 mm
diameter of the inner hinged round grating each 169.00
AIR VALVE & WATER METER (BULK TYPE)
18.59 Providing and fixing C.I. double acting air valve of approved quality
with bolts, nuts, rubber insertions etc. complete (The tail pieces,
tapers etc if required will be paid separately) :
18.59.1 50 mm dia each 5157.00
18.59.2 80 mm dia each 6240.70
18.59.3 100 mm dia each 8193.10
18.60 Providing and fixing enclosed type water meter (bulk type) conforming
to IS : 2373 and tested by Municipal Board complete with bolts,
nuts, rubber insertions etc. (The tail pieces if required will be paid
separately) :
18.60.1 80 mm dia nominal bore each 3576.10

No.
18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter
with nuts, bolts, rubber insertions etc. complete conforming to IS :
2373 :
18.61.1 80 mm dia each 4097.90
18.61.2 100 mm dia each 6585.50
18.61.3 150 mm dia each 8345.25
18.61.4 200 mm dia each 11644.65
18.62 Providing and fixing PTMT Ball cock of approved quality, colour and
make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.
plastic ball.
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore,
weighing not less than 85 gms each 155.35
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms each 111.75
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms. each 130.50
18.66 Providing and laying S&S C.I. Standard specials such as tees, bends,
collars tapers and caps etc, suitable for flanged jointing as per IS :
1538 :
18.66.2 Above 300 mm dia quintal 8799.05
18.67 Providing and laying S&S C.I. Standard specials suitable for
mechanical jointing as per IS : 13382 :
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on
jointing as per IS : 9523 :

No.
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for

mechanical jointing as per IS : 9523 :
18.70 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or
Ductile Iron Pipes including testing of joints and the cost of rubber
gasket :
18.70.1 100 mm dia pipes joint 91.65
18.71 Providing and laying Double Flanged (screwed / welded) Centrifugally
(Spun) Cast Iron, Class B (IS : 1536) :
18.71.1 100 mm dia C.I. Double Flanged Pipe metre 1827.10
18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron
Pipes conforming to IS : 8329 :
18.72.1 100 mm dia Ductile Iron Class K-7 pipes metre 1114.10

No.
18.73 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally
(Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
18.73.1 100 mm dia Ductile Iron Double Flanged metre 1532.35

No.

18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT
Nuts, collar and bush of approved quality and colour.
18.74.1 15 mm nominal bore with 30cm length each 94.90
18.74.2 15 mm nominal bore with 45 cm length each 112.45
18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour.
18.75.1 15 mm nominal bore, weighing not less than 32 gms each 49.20
18.75.2 20 mm nominal bore, weighing not less than 40 gms each 81.30
18.75.3 25mm nominal bore, weighing not less than 62 gms each 113.40
18.76 Cutting holes up to 30x30 cm in walls including making good the
same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks each 327.25
18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing
drain pipe etc. and repairing the hole after insertion of drain pipe etc.
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), including finishing complete
so as to make it leak proof. each 344.60
18.78 Making chases up to 7.5x7.5 cm in walls including making good and
finishing with matching surface after housing G.I. pipe etc. metre 154.15
18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm
diameter in masonry and filling with cement concrete 1:3:6 (1 cement
: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
including disposal of malba. metre 180.15
18.80 Disinfecting C.I. water mains by flushing with water containing
bleaching powder @ 0.5 gms per litre of water and cleaning the
same with fresh water, operation to be repeated three times including
getting the sample of water from the disinfected main tested in the
municipal laboratory.
18.80.1 80 mm diameter C.I. pipe 100 metre 1349.55

No.

18.81 Extra for every operation of disinfecting the C.I. main by flushing with
water containing bleaching powder @ 0.5 gms per litre of water and
cleaning the same with fresh water, including getting the samples of
water tested in the municipal laboratory :
18.82 Dismantling old C.I. pipes including excavation and refilling trenches
after taking out the pipes, breaking lead caulked joints, melting of
lead and making into blocks, including stacking of pipes at site lead
up to 50 metre:
18.82.1 80 mm diameter C.I. pipe metre 287.05
18.83 Labour for cutting C.I. pipe with steel saw.
18.83.1 80 mm diameter C.I. pipe each cut 108.90

No.

18.84 Providing & fixing chrome plated brass battery based infrared sensor
operated pillar cock, having foam flow technology.
18.85 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting
shall be paid for separately) i/c fixing of the pipe with clamps at 1.00
m spacing including cutting and making good the walls including
testing of joints complete as per direction of Engineer-in-charge.
(The pipe length inserted in the fitting shall not be measured for
payment)
Inernal work - Exposed on wall
18.85.1 15.88 mm outer dia pipe metre 325.20
18.85.2 22.22 mm outer dia Pipe metre 484.00
18.86 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting
shall be paid for separately) i/c fixing of the pipe with clamps at
1.00m spacing and also including cutting of chases and making
good the walls including testing of joints complete as per direction of
Engineer -in-charge. (The pipe length inserted in the fitting shall not
be measured for payment)
Internal work - Concealed Pipe
18.86.1 15.88 mm outer dia .Pipes. metre 478.65
18.86.2 22.22 mm Outer dia pipes metre 637.40
18.87 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.

No.
Coupling/Socket
18.87.1 For 15.88 mm outer dia pipe each 78.95
providing and fixing required Stainless Steel Fitting of press fit design
required dia as per dirction of Engineer-in-charge.
Reducer
18.88.1 For 22.22 mm x 15.88 mm outer dia pipe each 137.80
Slip Coupling/ Socket

No.

Elbow 90°
18.90.1 For 15.88mm outer dia pipe each 77.60
Reducing Elbow 90°
18.91.1 For22.22 mm x 15.88 mm outer dia pipe each 198.00
Equal Tee

No.
Reducing Tee
Male Thread Tee
18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 239.50

No.
Female Thread Tee
18.95.1 For 15.88 mm outer dia x15 mm nominal dia threaded each 239.50
Female Thread Connector/ Adapter
18.96.2 For 22.22 mm outer dia x 15 mmnominal dia threaded each 307.75

No.
Male Thread Connector/ Adapter
Valve Connector

No.
Female Threaded Elbow 90°
Male Threaded Elbow 90°
Cap

No.
Pipe Bridge

SUB HEAD : 19.0
DRAINAGE
357
BASIC RATES (SH: 19.0 DRAINAGE)
No.
0362 Brick bats cum 450.00
1006 Mild steel square bars quintal 4500.00
1336 Clearing eye with chain and lid 100 mm dia each 44.00
1337 Clearing eye with chain and lid 150 mm dia each 50.00
1352 C.I. cover and frame 300x300 mm inside each 477.00
1353 C.I. cover without frame 300x300 mm inside i/c cover of 4.50 kg each 477.00
1354 Rectangular cover 455x610 mm with frame (low duty) each 1400.00
1355 Rectangular cover 455x610 mm without frame (low duty) each 910.00
1356 500 mm dia cover with frame (medium duty) each 4400.00
1357 500 mm dia cover without frame (medium duty) each 2300.00
1364 C.I. grating 100x100 mm each 40.22
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres
1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres
1700 R.C.C. pipes NP2 class 100 mm dia metre 200.00
SUB HEAD : 19.0 DRAINAGE 358

No.

1714 R.C.C. collars NP2 class 100 mm dia each 30.00
1728 RCC pipe 450 mm dia NP-3 spigot metre 1496.00
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each 55.00

No.
1900 S.W. gully trap P type 100x100 mm each 100.00
2224 Carriage of S.W. pipes 100 mm dia 100 metre 138.36
2261 Carriage of Fine sand cum 103.77
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 92.24
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 2520.19
2303 Carriage of R.C.C. pipes 600,700,750 & 800 mm dia 100 metre 3780.28
2336 Carriage of R.C.C. pipe above 1200 mm dia and upto
1800 mm dia 100 metre 7560.57
2602 Common burnt clay F.P.S. (non modular) bricks class
designation 7.5 1000 Nos 4500.00
3860 560 mm dia cover with frame (Heavy duty) each 9000.00
3861 560 mm dia cover without frame (Heavy duty) each 5000.00
7087 S.C.I. Tee 150 mm each 570.00
7128 S.W. intercepting trap 100 mm dia each 185.00
7129 S.W. intercepting trap 150 mm dia each 240.00
7130 Rectangular shape 600x450 mm precast R.C.C. manhole
cover with frame - L.D. - 2.5 each 675.00
7131 Square shape 450x450 mm precast R.C.C. manhole cover
with frame - L.D. - 2.5 each 575.00

No.
7132 Circular shape 450 mm dia precast R.C.C. manhole cover

with frame - L.D. - 2.5 each 575.00
7133 Rectangular shape 500x500 mm precast R.C.C. manhole
cover with frame - M.D. - 10 each 670.00
with frame- M.D.-10 each 575.00
with frame - H.D. - 20 each 880.00
with frame - E.H.D. - 35 each 1170.00
7354 Plastic encapsulated M.S. foot rest 30x20x15 cm each 110.00
7380 Precast R.C.C. grating with frame 500x450 mm horizontal
grating each 620.00
7381 Precast R.C.C. grating with frame 450x100 mm vertical
grating each 235.00
8701 SS pipe 304 grades with press fit technology as per JIS
3448 standard 48.60 mm outer dia metre 610.00

19.0 DRAINAGE
No.
NOTE : - The rates given for all the items under sub-head ‘Drainage’
are applicable to work executed in soils above sub- soil water level.
Extra allowance has to be made for work under sub- soil water level.
STONE WARE PIPES AND FITTINGS
19.1 Providing, laying and jointing glazed stoneware pipes class SP-1
with stiff mixture of cement mortar in the proportion of 1:1 (1 cement
: 1 fine sand) including testing of joints etc. complete :
19.1.1 100 mm diameter metre 317.05
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round
S.W. pipes including bed concrete as per standard design :
19.2.1 100 mm diameter S.W. pipe metre 817.00
19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) up to
haunches of S.W. pipes including bed concrete as per standard
design :
19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover
with frame of 300 x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70 kg as per
standard design:
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 each 2307.00
19.4.1.2 With Sewer bricks conforming to IS : 4885 each 2311.05
19.4.2 150 x 100 mm size P type

No.
19.4.2.2 With sewer bricks conforming to IS : 4885 each 2321.45

19.4.3 180x150 mm size P type
19.5 Dismantling of old S.W. pipes including breaking of joints and bed
concrete stacking of useful materials near the site within 50 m lead
and disposal of unserviceable materials into municipal dumps :
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.
pipes with collars jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints
etc. complete :
19.6.1 100 mm dia. R.C.C. pipe metre 415.75
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement
: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :
1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse
sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with floating coat of neat cement and making

No.
channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover
with frame (light duty) 455x610 mm internal dimensions,
total weight of cover and frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg) :
with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :
with frame (heavy duty) 560 mm internal diameter, total
weight of cover and frame to be not less than 208 kg (weight
of cover 108 kg and weight of frame 100 kg) :
19.8 Extra for depth for manholes :
19.8.1 Size 90x80 cm
bricks of class designation 7.5 metre 7503.00
19.8.1.2 With Sewer bricks conforming to IS : 4885 metre 7533.80
19.8.2 Size 120x90 cm
19.8.2.2 With Sewer bricks conforming to IS : 4885 metre 9031.30
19.9 Constructing brick masonry circular type manhole 0.91 m internal
dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement
: 4 coarse sand), inside cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat
of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished
with a floating coat of neat cement, all complete as per standard
design :

No.
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty,
HD-20 grade designation) 560 mm internal diameter con-
forming to I.S. 12592, total weight of cover and frame to be
not less than 182 kg., fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom)
beyond 0.91 m to 1.67 m
19.10.2 With Sewer bricks conforming IS : 4885 metre 6474.15
19.11 Constructing brick masonry circular manhole 1.22 m internal dia at
bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4
coarse sand) inside cement plaster 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat
cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal size) and making necessary
channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
coat of neat cement, all complete as per standard design :
19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-
20 grade designation) 560 mm internal diameter conform-
ing to I.S. 12592, total weight of cover and frame to be not
less than 182 kg. fixed in cement concrete 1:2:4 (1 ce-
ment : 2 coarse sand : 4 graded stone aggregate 20 mm
(Excavation, foot rests and 12 mm thick cement plaster at
19.11.1.2 With Sewer bricks conforming IS : 4885 each 21254.90
19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom)
beyond 1.68 m to 2.29 m :
19.13 Constructing brick masonry circular manhole 1.52 m internal dia at
bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4
coarse sand) inside cement plaster 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat
cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6

No.
graded stone aggregate 40 mm nominal size) and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
coat of neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD-
20 grade designation) 560 mm internal diameter conform-
ing to I.S. 12592, total weight of cover and frame to be not
less than 182 kg. fixed in cement concrete 1:2:4 (1 ce-
ment : 2 coarse sand : 4 graded stone aggregate 20 mm
(Excavation, foot rests and 12 mm thick cement plaster at
19.13.1.2 With Sewer bricks conforming IS : 4885 each 45531.90
19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom)
beyond 2.30 m :
19.15 Providing M.S. foot rests including fixing in manholes with
20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) as per
standard design :
19.15.1 With 20x20 mm square bar each 422.20
19.15.2 With 20 mm diameter round bar each 383.70
19.16 Providing orange colour safety foot rest of minimum 6 mm thick
plastic encapsulated as per IS : 10910, on 12 mm dia steel bar
conforming to IS: 1786, having minimum cross section as 23 mmx25
mm and over all minimum length 263 mm and width as 165 mm with
minimum 112 mm space between protruded legs having 2 mm tread
on top surface by ribbing or chequering besides necessary and
adequate anchoring projections on tail length on 138 mm as per
standard drawing and suitable to with stand the bend test and
chemical resistance test as per specifications and having
manufacture’s permanent identification mark to be visible even after
fixing, including fixing in manholes with 30x20x15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) complete as per design. each 463.05
19.17 Replacement of M.S. foot rests in manholes including dismantling
concrete blocks and fixing with 20x20x10 cm cement concrete blocks
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size):
19.17.1 With 20x20 mm square bar each 516.40
19.17.2 With 20 mm diameter round bar each 477.90

No.
19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight
of the cover to be not less than 23 kg each 1326.25
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the
cover to be not less than 58 kg each 3202.90
19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the
cover to be not less than 108 kg each 6822.40
19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and
frame of required shape and approved quality
19.19.1 L D- 2.5
19.19.1.1 Rectangular shape 600x450 mm internal
dimensions each 1228.90
19.19.1.2 Square shape 450 mm internal dimensions each 1027.25
19.19.1.3 Circular shape 450 mm internal diameter each 1027.25
19.19.2 M D - 10
19.19.2.1 Square shape 450 mm internal dimension each 1230.60
19.19.3 H D - 20
19.19.4 EHD - 35
19.19.4.1 Circular shape 560 mm internal dia each 1859.50
19.20 Supplying and fixing C.I. cover 300x300 mm without frame for gully
trap (standard pattern) the weight of cover to be not less than 4.5 kg each 667.80
19.21 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cement plastered on both sides
with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a
floating coat of neat cement and making necessary channels for the
drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter each 623.50
19.22 Providing sand cast iron drop connection externally for 60 cm drop
from branch sewer line to main sewer manhole including inspection
and cleaning eye with chain and lid, sand cast iron drop pipe and
bend encased all-round with cement concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm nominal size) with all
centering and shuttering required, cutting holes in walls and making
good with brick work in cement mortar 1:4 (1 cement : 4 coarse
sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand)
on inside of the manhole wall, lead caulked joints between sand
cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1

No.
fine sand) joints between sand cast iron tee and S.W. pipe, making
required channels complete as per standard design and
specifications :
19.22.1 100 mm dia sand cast iron drop connection each 9334.20
19.22.2 150 mm dia sand cast iron drop connection each 12833.35
19.23 Extra for depths beyond 60 cm of sand cast iron drop connection
complete:
19.23.1 For 100 mm dia sand cast iron drop connection metre 2632.40
19.23.2 For 150 mm dia sand cast iron drop connection metre 3418.90
19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover with
frame, including stacking of useful materials near the site and disposal
of unserviceable materials within 50 m lead as per direction of
Engineer- charge :
19.24.1 Rectangular manhole 90x80 cm and 45 cm deep each 1815.85
19.24.2 Rectangular manhole 120x90 cm and 90 cm deep each 3196.30
19.24.3 Rectangular arch type manhole 140x90 cm and 2.45 m
deep each 6046.60
19.24.4 Circular manhole 122 cm diameter and 1.68 m deep each 4624.55
19.25 Extra for depth of manholes dismantled :
19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth metre 1460.05
19.25.2 Rectangular manhole 120x90 cm and beyond 90 cm depth metre 1739.35
19.25.3 Rectangular arch type manhole 140x90 cm and beyond
2.45 m depth (up to 4.25 m depth) metre 1409.80
19.25.4 Circular manhole 122 cm diameter and beyond 1.68 m
depth (up to 2.29 m depth) metre 1590.55
19.26 Raising manhole cover and frame slab to required level including
dismantling existing slab and making good the damage as required
(Raising depth of manhole to be paid separately) :
19.26.1 Rectangular manhole 90x80 cm with rectangular cover
600 x 450 mm of grade LD - 2.5 each 2457.95
19.26.2 Rectangular manhole 120x90 cm with circular cover
500 mm dia of grade MD - 10 each 3871.15
19.26.3 Rectangular manhole 120x90 cm with circular cover
560 mm dia of grade HD - 20 each 3600.25
19.26.4 Circular manhole 140 cm dia with circular cover 600 mm
dia of grade EHD - 35 each 297.60
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame complete
as per standard design :

No.
19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast
R.C.C. vertical grating complete as per standard design :
19.29 Constructing brick masonry road gully chamber 110x50x77.5 cm
with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm precast R.C.C. horizontal grating with frame and vertical
grating complete as per standard design :
19.30 Constructing brick masonry chamber for underground C.I. inspection
chamber and bends with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38
kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size), foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement
: 3 coarse sand), finished smooth with a floating coat of neat cement
on walls and bed concrete etc. complete as per standard design:
19.30.1 Inside dimensions 455x610 mm and 45 cm deep for single

pipe line :
19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe
line with one or two inlets :
19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe
line with three or more inlets :
19.31 Extra for depth beyond 45 cm of brick masonry chamber :
19.31.1 For 455x610 mm size
19.31.2 For 500x700 mm size
19.31.3 For 600x850 mm size

No.
19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.
19.33 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including
S.W. drain pipe 100 mm diameter and 1.20 m long complete as per
standard design. each 2608.00
19.34 Providing and fixing S.W. intercepting trap in manholes with stiff
mixture of cement mortar 1:1 (1 cement : 1 fine sand) including
testing of joints etc. complete :
19.34.1 100 mm dia each 365.65
19.34.2 150 mm dia each 494.75
19.35 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.
pipes including collars/spigot jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete
19.35.1 450 mm dia RCC pipes. metre 2323.90
19.35.4 1000 mm dia RCC pipes. (Laying by manual/ machanical
means) metre 5816.30
19.35.6 1800 mm dia RCC pipes. (Laying by manual/ machenical
19.36 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C.
pipes including collars/spigot jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete
19.36.4 1000 mm dia RCC pipes.(Laying by manual/ machanical

SUB HEAD : 20.0
PILE WORK
371
BASIC RATES (SH: 20.0 PILE WORK)
No.
0015 Hire and running charges of Tripod and Mechanical Winch
machine complete with power unit and accessories day 1900.00
0017 Hire and running charges of tipper day 1700.00
0018 Hire and running charges of loader day 5000.00
0024 Hire and running charges of hydraulic piling rig with power unit etc.
including complete accessories and shifting at site day 30000.00
0025 Hire and running charges of light crane day 3000.00
0026 Hire and running charges of bentonite pump day 3500.00
0027 Hire and running charges of vibrating pile driving hammer complete
with power unit and accessories day 30000.00
0028 Hire and running charges of crane 20 tonne capacity day 7000.00
0080 Hire and running charges of drill machine up to 400 mm dia
(including cost of mobile oil, diesel consumption in ordinary soil
and operator) day 7500.00
0081 Pile Integrity testing equipment day 3000.00
0161 Helper (Technician) day 558.00
7181 C.I. pile shoe kg 48.00
7182 M.S. clamps for pile shoe of 35 kg per pile kg 43.00
7183 Bentonite of 35 kg per pile tonne 2960.00
7246 Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification and up to 50
tonne capacity pile per test 40000.00
of pile head or construction of test cap and dismantling of
test cap after test etc. complete as per specification & above 50
tonne and up to 100 tonne per test 45000.00
of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification & group of two
or more up to 50 tonne per test 50000.00
SUB HEAD : 20.0 PILE WORK 372

No.
7249 Cyclic vertical load testing of piles in accordance with IS : 2911

(Part-IV) including preparation of pile head etc. for Single pile up
to 50 tonne capacity per test 15000.00
(Part-IV) including preparation of pile head etc. for Single pile
above 50 tonne capacity pile and up to 100 tonne capacity pile per test 23000.00
(Part-IV) including preparation of pile head etc. for Group of two
piles up to 50 tonne capacity each per test 29500.00
7252 Lateral load testing of single pile in accordance with IS : 2911
part -IV for determining safe allowable lateral load on pile up to
50 tonne capacity per test 15000.00
7253 Lateral load testing of single pile in accordance with IS : 2911
part -IV for determining safe allowable lateral load on pile above
50 tonne capacity per test 23600.00

20.0 PILE WORK
No.
20.1 Providing, driving with hydraulic piling rigs with power units and
installing driven cast-in-situ reinforced cement concrete piles of grade
M-25 of specified diameter and length below the pile cap, to carry
safe working load not less than specified, excluding the cost of steel
reinforcement but including the cost of shoe and the length of pile to
be embedded in the pile cap etc. all complete. (Length of pile for
payment shall be measured from top of shoe to the bottom of pile
cap) :
20.1.1 400 mm dia piles metre 2244.10
20.2 Boring, providing and installation bored cast-in-situ reinforced cement
concrete piles of grade M-25 of specified diameter and length below
the pile cap, to carry a safe working load not less than specified,
excluding the cost of steel reinforcement but including the cost of
boring with bentonite solution and temporary casing of appropriate
length for setting out and removal of same and the length of the pile
to be embedded in the pile cap etc. by percussion drilling using
Direct mud circulation (DMC) or Bailer and chisel technique by tripod
and mechanical Winch Machine all complete, including removal of
excavated earth with all its lifts and leads (length of pile for payment
shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not
be used .
20.2A Boring, providing and installation bored cast-in-situ reinforced cement
concrete piles of garde M-25 of specified diameter and length below
pile cap, to carry a safe working load not less than specified, excluding
the cost of steel reinforcement but including the cost of boring with
bentonite solution and temporary casing of appropriate length for
setting out and removal of same and the length of the pile to be
embedded in the pile cap etc. by Crawler mounted, telescopic boom
hydraulic pilling Rig all complete, including removal of excavated
earth with all its lifts and leads (length of pile for payment shall be
measured up to bottom of pile cap).

No.
Note: Truck Mounted rotary/TMR/Tube well boring machine shall not

be used.
20.2A.1 600 mm dia piles metre 4225.60
20.3 Boring with hydraulic piling rigs with power units, providing and
installing cast in situ single under reamed piles of specified diameter
and length below pile cap in M-25 cement concrete, to carry a safe
working load not less than specified, excluding the cost of steel
reinforcement but including the cost of boring with bentonite solution
and the length of the pile to be embedded in pile cap etc. all complete.
(Length of pile for payment shall be measured upto to the bottom of
pile cap) :
20.4 Extra over single under ream for providing additional bulbs in
under reamed piles, under specified diameter(only the nos. of
extra bulbs are to be paid)
20.4.1 300 mm dia piles each 1931.85
20.4.2 400 mm dia piles each 2183.65
20.4.3 450 mm dia piles each 2335.50
20.4.4 550 mm dia piles each 2558.20
20.5 Providing, driving (with vibrating pile driving hammer complete
with power units & accessories) and installing driven Pre-cast
reinforced cement concrete piles of specified diameter and length below
the pile cap in M-25 cement concrete to carry safe working load not
less than specified, with a central through preformed hole with M.S.
black pipe of dia, 40 mm for grouting with cement sand grouting of mix
1:2 (1cement : 2 coarse sand) under sufficient positive pressure to
ensure complete filling including centring, shuttering, driving and
removing the steel casing pipe and lifting casing etc. complete but
excluding the cost of steel reinforcement. (Length of pile for payment
shall be measured from top of the shoe to the bottom of pile cap).

No.
20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV)
including installation of loading platform by Kentledge/Anchor piles
method and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification
& the direction of Engineer in-charge.
Note: 1. Initial and Routine Load Test shall not be carried out by
Dynamic method of testing.
Note: 2. Testing agency shall submit the design of loading platform
for the approval of Engineer-in-charge.
20.6.1 Single pile upto 50 tonne Safe capacity
20.6.1.1 Initial test (Test Load 2.5 times the Safe
capacity) per test 53517.50
20.6.1.2 Routine test (Test Load 1.5 times the Safe
20.6.2 Single pile above 50 tonne and upto 100 tonne Safe
capacity
20.6.3 Group of two or more piles upto 50 tonne Safe capacity
20.7 Cyclic vertical load testing of pile in accordance with IS Code of
practice IS:2911 (part IV) by Kentledge method including preparation
of pile head etc for.
20.7.1 Single pile
20.7.1.1 Upto 50 tonne Safe capacity pile per test 20069.05
20.7.1.2 Above 50 tonne and upto 100 tonne Safe
capacity pile per test 30772.55
20.7.2 Group of two or more piles
20.7.2.1 Upto 400 tonne Safe capacity of group per test 39469.15
20.8 Lateral load testing of single pile in accordance with IS Code of
practice IS : 2911 (Part IV) for determining safe allowable lateral load
on pile :
20.8.1 Upto 50 tonne capacity pile per test 20069.05
20.8.2 Above 50 tonne and upto 100 tonne capacity pile per test 31575.35
20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic
Echo Test method in accordance with IS 14893 including surface
preparation of pile top by removing soil, mud, dust & chipping lean

No.
concrete lumps etc. and use of computerised equipment and high

skill trained personal for conducting the test & submission of results,
all complete as per direction of Engineer-in-charge. per test 938.90
Note :- The inclusion of the above item in the schedule of work shall
be judiciously decided by the technical sanctioning authority, keeping
in view the quality control, type of soil strata & importance of the
project.

SUB HEAD : 21.0
ALUMINIUM WORK
378
BASIC RATES (SH: 21.0 ALUMINIUM WORK)
No.
0689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos 393.00
0992 Galvanised steel plain sheets quintal 5000.00
2406 Float glass panes of nominal thickness 4 mm (weight not
less than 10 kg/sqm) sqm 300.00
2604 Weather/ structural non sag. Elastomeric PU sealant (600ml)
sausage) for joints in RCC/ Brick/ stone/ Wood/ Ceramic/ Gypsum/
Aluminum work complying to ASTM C 920, DIN 18540 - F & ISO
11600 incl. all taxes each 532.00
2704 Aluminium Strip 40 mm wide and 2 mm thick kg 240.00
7001 Brass 100mm mortice latch and lock with 6 levers without pair
of handles each 210.00
7019 Dash fastener / Chemical fastener each 14.00
7048 Rawl plug 50 mm (designation 10 nos) each 25.00
7313 Expandable fastener with plastic sleeve and M.S. screws :
32 mm long each 10.00
7347 Cadmium plated full threaded steel screws (30x4 mm dia) 100 Nos 27.00
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 10.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 11.00
7389 Anodising 15 microns on aluminium sections kg 38.00
7390 EPDM Gasket for uPVC window/door metre 19.00
7391 Anodising 25 microns on aluminium sections kg 48.00
7392 Powder coating 50 microns on aluminium sections kg 61.00
7393 Polyester powder coating 50 microns on aluminium sections kg 67.00
7394 Double action hydraulic floor spring with stainless steel
cover plate each 1500.00
7395 6 mm dia G.I. adjustable hangers including clips (up to 1.2 m
length) each 20.00
SUB HEAD : 21.0 ALUMIINIUM WORK 379
No.
7396 Double action hydraulic floor spring with brass cover plate each 1620.00
7477 Prelaminated particle board with one side decorative and
other side balancing lamination, flat pressed 3 layer & graded
(medium density) Grade i, Type II conforming to IS : 12823 (exterior
grade) 12 mm thick sqm 540.00
7480 Prelaminated particle board with both sides decorative lamination,
flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade) 12 mm thick sqm 575.00
8646 Weather Silicon sealant cartridge 100.00
8647 Stainless steel screws 30 mm x4 mm 100 Nos 32.00
8648 Hermetically sealed double glazed unit made with 6 mm thick clear
float glass both side having 12 mm air gap sqm 2150.00
8649 Stainless steel (SS 304 grade) adjustable friction window stay
205 x 19 mm each 172.00
255 x 19 mm each 222.00
355 x 19 mm each 195.00
510 x 19 mm each 525.00
710 x 19 mm each 900.00
8654 Masking tape metre 1.95
8660 Aluminium casement window fastener (Anodised AC 15) each 44.00
8661 Aluminium casement window fastener (powder coated ) each 47.00
8662 Aluminium casement window fastener (polyester powder
coated) each 46.00
8663 Aluminium round shape handle (anodised AC 15) outer dia 100 mm each 53.00
8664 Aluminium round shape handle (powder coated) outer dia 100 mm each 56.00
8665 Aluminium round shape handle (polyester powder coated)
outer dia 100 mm each 60.00
8666 Stainless steel screws 25 mm x4 mm 100 Nos 38.00
8674 Precoated galvanised steel gutter 600mm overall girth metre 420.00
8676 Precoated galvanised steel barge board (upto 300mm ) metre 215.00
8678 1 mm thick 35 mm wide bright finished stainless steel piano hinges metre 42.00
8774 Aluminium Grill as per IS 1868 kg 260.00
8776 Stainless steel dash fastener of 8 mm dia and 75 mm long bolt each 15.00
8778 Toughened glass 12 mm thickness sqm 1747.00
SUB HEAD : 21.0 ALUMIINIUM WORK 380

21.0 ALUMINIUM WORK
No.
21.1 Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent
or dyed to required shade according to IS:
1868, Minimum anodic coating of grade AC
15) kg 423.95
21.1.1.2 Powder coated aluminium (minimum
thickness of powder coating 50 micron) kg 456.30
21.1.1.3 Polyester powder coated aluminium
(minimum thickness of polyester powder
coating 50 micron) kg 464.70
21.1.2 For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision
for fixing of fittings wherever required including the cost
of EPDM rubber / neoprene gasket required (Fittings
shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent
or dyed to required shade according to IS:
1868, Minimum anodic coating of grade AC
15) kg 513.40
21.1.2.2 Powder coated aluminium (minimum
21.1.2.3 Polyester powder coated aluminium
(minimum thickness of polyester powder
coating 50 micron) kg 554.95
21.2 Providing and fixing 12 mm thick prelaminated particle board flat
pressed three layer or graded wood particle board conforming to IS:
12823 Grade l Type ll, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws
etc. complete as per architectural drawings and directions of engineer-
in-charge.
21.2.1 Pre-laminated particle board with decorative lamination
on one side and balancing lamination on other side sqm 997.70
21.2.2 Pre-laminated particle board with decorative lamination
on both sides sqm 1046.90
SUB HEAD : 21.0 ALUMINIUM WORK 381

No.
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with EPDM rubber / neoprene gasket etc. complete as
per the architectural drawings and the directions of engineer-in-charge .
(Cost of aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness (weight not
less than 10 kg/ sqm) sqm 999.60
21.3.2 With float glass panes of 5 mm thickness (weight not
less than 12.50 kg/ sqm) sqm 1296.40
21.3.3 With float glass panes of 8 mm thickness (weight not
less than 20 kg/ sqm) sqm 1462.35
21.4 Providing and fixing double action hydraulic floor spring of approved brand
and manufacture conforming to IS : 6315, having brand logo embossed
on the body / plate with double spring mechanism and door weight upto
125 kg, for doors, including cost of cutting floors, embedding in floors as
required and making good the same matching to the existing floor finishing
and cover plates with brass pivot and single piece M.S. sheet outer box
with slide plate etc. complete as per the direction of Engineer-in-charge.
21.4.1 With stainless steel cover plate minimum 1.25 mm
thickness each 2412.50
21.4.2 With brass cover plate minimum 1.25 mm thickness each 2573.05
21.5 Providing and fixing powder coated aluminium work (minimum
thickness of powder coating 50 micron) consisting of tee/ angle
sections, of approved make conforming to IS : 733 in frames of false
ceiling including aluminium angle cleats with necessary C.P. brass/
stainless steel sunk screws, aluminium perimeter angles fixed to
wall with stainless steel rawl plugs @ 450 mm centre to centre and
fixing the frame work to G.I. level adjusting hangers 6 mm dia. with
necessary cadmium plated machine screws all complete as per
approved architectural drawings and direction of the Engineer-in-
charge (level adjusting hangers, ceiling cleats and expansion hold
fasteners to be paid for separately). kg 670.85
21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto
1200mm length), fixed to roof slabs by means of ceiling cleats made
out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable
dash fastener of 12.5 mm dia and 50 mm long, complete as per
21.7 Providing and fixing machine moulded aluminium covering of approved
pattern & design, made out of machine cut aluminium sheet and
machine holed for receiving dash fastener, over expansion joints on
vertical surfaces/ceiling floors, the fixing on plate in one row on one
side of joint only shall be done with stainless steel dash fasteners of
8 mm dia and 75 mm long bolt including providing aluminium washers
2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to
centre including drilling holes in the receiving surface and providing
expandable plastic sleeves in holes etc. complete as per direction of
Engineer-in-charge.

No.
21.7.1 Anodised aluminium sheet 2.5mm thick (anodised trans-

parent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15) kg 582.05
21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of
approved quality as per architectural drawings and direction of
Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width metre 79.45
21.9 Extra for applying additional anodic coating AC 25 instead of AC 15
to aluminium extruded sections.
21.9.1 For fixed portion kg 13.40
21.9.2 For shutters of doors, windows & ventilators kg 13.40
21.10 Providing and fixing double glazed hermetically sealed glazing in
aluminium windows, ventilators and partition etc. with 6 mm thick
clear float glass both side, having 12 mm air gap, including providing
EPDM gasket, perforated aluminium spacers, desiccants, sealant
(Both primary and secondary sealant) etc. as per specifications,
drawings and direction of Engineer-in-charge complete. sqm 3905.35
21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction
windows stays of approved quality with necessary stainless steel
screws etc. to the side hung windows as per direction of Engineer-
in-charge complete.
21.11.1 205 X 19 mm each 255.75
21.11.2 255 X 19 mm each 322.65
21.11.3 355 X 19 mm each 286.50
21.11.4 510 X 19 mm each 728.05
21.11.5 710 X 19 mm each 1229.75
21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia,
3.0 mm thick & 2100 mm long with SS screws etc .complete as per
direction of Engineer-in-Charge.
21.12.1 Anodized (AC 15 ) aluminium tubular handle bar each 512.30
21.12.2 Powder coated minimum thickness 50 micron aluminium
tubular handle bar each 562.60
21.12.3 Polyester powder coated minimum thickness 50 micron
aluminium tubular handle bar each 575.70
21.13 Providing and fixing Brass 100mm mortice latch and lock with 6
levers without pair of handles (best make of approved quality) for
aluminium doors including necessary cutting and making good etc.
21.14 Providing and fixing anodised aluminium (anodised transparent or
dyed to required shade according to IS: 1868. Minimum anodic
coating of grade AC 15) sub frame work for windows and ventilators

No.
with extruded built up standard tubular sections of approved make

conforming to IS: 733 and IS: 1285, fixed with dash fastener of required
dia and size (Dash fastener to be paid for separately). kg 354.75
21.15 Providing and fixing aluminium casement windows fastener of required
length for aluminium windows with necessary screws etc. complete.
21.15.1 Anodized (AC 15) aluminium each 67.55
21.15.2 Powder coated minimum thickness 50 micron aluminium each 71.55
aluminium each 70.25
21.16 Providing and fixing aluminium round shape handle of outer dia 100
mm with SS screws etc. complete as per direction of Engineer-in-
charge
21.16.1 Anodized (AC 15 ) aluminium each 79.60
21.16.2 Powder coated minimum thickness 50 micron aluminium each 83.60
aluminium each 88.95
21.17 Providing and fixing anodised aluminium grill (anodised transparent
or dyed to required shade according to IS: 1868 with minimum anodic
coating of grade AC 15) of approved design/pattern, with approved
standard section and fixed to the existing window frame with C.P.
brass/ stainless steel screws @ 200 mm centre to centre, including
cutting the grill to proper opening size for fixing and operation of
handles and fixing approved anodised aluminium standard section
around the opening, all complete as per requirement and direction of
Engineer-in-charge. (Only weight of grill to be measured for payment). kg 519.85
21.18 Providing and fixing 12 mm thick frameless toughened glass door
shutter of approved brand and manufacture, including providing and
fixing top & bottom pivot & double action hydraulic floor spring
type fixing arrangement and making necessary holes etc. for fixing
required door fittings, all complete as per direction of Engineer-in-
charge (Door handle, lock and stopper etc.to be paid separately). sqm 4447.90
21.19 Filling the gap in between aluminium/ stone/ wood frame and adjacent
RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing
weather/structural non sag elastomeric PU sealant over backer rod
of approved quality as per architectural drawings and direction of
Engineer-in-charge complete, complying to ASTM C920, DIN 18540-
F & ISO 11600
21.19.1 Upto 5 mm depth and 5 mm width metre 125.10

SUB HEAD : 22.0
WATER PROOFING
385
BASIC RATES (SH : 22.0 WATER PROOFING)
No.
0128 Mate day 617.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1350.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 34000.00
0318 Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I sqm 70.00
0319 Bitumen felt as per IS 7193 Grade II sqm 80.00
0322 Bitumen felt :Type 3 grade 1 sqm 70.00
0351 Integral crystalline slurry kg 238.00
0352 Integral crystalline admixture kg 272.00
0353 Crystalline mortar kg 215.00
0354 Integral crystalline dry shake kg 360.00
0355 Swellable type water stop tape metre 365.00
0356 Primer for swellable type water stop tape litre 1540.00
0370 Coal (steam) quintal 440.00
1169 Kota stone slab 25mm thick (rough chiseled) sqm 301.00
1177 Stone grit 6 mm and down size or pea sized gravel cum 800.00
1241 Commercial LPG in cylinder kg 82.00
2200 Carriage of Steam coal tonne 120.00
SUB HEAD : 22.0 WATER PROOFING 386

No.
2211 Carriage of Tar / Bitumen tonne 103.77
2216 Carriage of Stone blocks white & red sand stone & kota stone
slab tonne 92.24
3002 Polyvinyl chloride sheet 400 micron thick sqm 40.00
7233 Fibre glass tissue reinforcement Type II Grade i sqm 82.00
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm
thick) metre 200.00
7428 Water stops Dumb bell with central bulb metre 160.00
7429 Kickers metre 185.00
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm 80.00
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm 100.00
8203 A.P.P. modified 2 mm thick membrane reinforced with glass
fibre matt sqm 126.67
8204 A.P.P. modified 3 mm thick membrane reinforced with glass
fibre matt sqm 190.00
8205 A.P.P. modified 3 mm thick membrane reinforced with polye
ster matt sqm 205.00
8206 Bitumen primer for bitumen membrane litre 80.00
8207 Geotextile 120 grams per sqm membrane sqm 45.00
8501 Polymer modified cementation coating kg 140.00
8502 Fibre glass cloth sqm 25.00
8511 Fibre reinforced elastomeric liquid water proofing membrane litre 198.69
8512 Cementitious water proofing coating with elastic polymers kg 189.13
8513 Acrylic modified resin based texture kg 36.00

22.0 WATER PROOFING
No.
22.1 Providing and laying integral cement based treatment for water
proofing on horizontal surface at all depth below ground level for
under ground structures as directed by Engineer-in-Charge and
consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough
stone slab over a 25 mm thick base of cement mortar 1:3 (1
cement : 3 coarse sand) mixed with water proofing compound
conforming to IS:2645 in the recommended proportion over the
leveling course (leveling course to be paid separately). Joints
sealed and grouted with cement slurry mixed with water proofing
compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse
sand) mixed with water proofing compound in recommended
proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal
size spreading @ 8 cudm/sqm thoroughly embedded in the
2nd layer.
22.1.1 Using rough kota stone. sqm 1353.70
22.2 Providing and laying integral cement based treatment for water
proofing on the vertical surface by fixing specified stone slab 22 mm
to 25 mm thick with cement slurry mixed with water proofing
compound conforming to IS:2645 in recommended proportions with
a gap of 20 mm (minimum) between stone slabs and the receiving
surfaces and filling the gaps with neat cement slurry mixed with
water proofing compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with
neat cement punning mixed with water proofing compound in
recommended proportion complete at all levels and as directed by
22.2.1 Using rough Kota stone sqm 1738.00
22.3 Providing and laying water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like consisting
of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with
water proofing compound conforming to IS 2645 in recommended
proportions including rounding off junction of vertical and
horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and horizontal
surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at
1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each other
with bitumen @ 1.7 kg/sqm). sqm 705.70

No.
22.4 Providing and Placing in position suitable PVC water stops conforming
to IS:12200 for construction/ expansion joints between two RCC
members and fixed to the reinforcement with binding wire before
pouring concrete etc. complete :
22.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick) metre 283.20
22.4.2 Dumb bell with central bulb (180 mm wide, 8 mm thick) metre 229.70
22.4.3 Kickers (320 mm wide, 5 mm thick) metre 263.15
22.5 Providing and laying water proofing treatment in sunken portion of
WCs, bathroom etc., by applying cement slurry mixed with water
proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/ sqm. This layer
will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with
water proofing cement compound @ 0.126 kg/sqm. This layer
will be allowed to air cure for 4 hours followed with water curing
for 48 hours.
(The rate includes preparation of surface, treatment and sealing of
all joints, corners, junctions of pipes and masonry with polymer mixed
slurry.) sqm 465.60
22.6 Providing and laying water proofing treatment on roofs of slabs by
applying cement slurry mixed with water proofing cement compound
consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488
kg/sqm mixed with water proofing cement compound @ 0.253
kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is
still green. Overlaps of joints of fibre cloth should not be less
than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement
@ 1.289 kg/sqm mixed with water proofing cement compound
@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will
be allowed to air cure for 4 hours followed by water curing for 48
hours. The entire treatment will be taken upto 30 cm on parapet
wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which
will be paid for separately.
(For the purpose of measurement the entire treated surface will be
measured.) sqm 523.05
22.7 Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC

No.
slab including adjoining walls upto 300 mm height including

cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25
mm to 115 mm size with 50% of cement mortar 1:5 (1 cement
: 5 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge
over 20 mm thick layer of cement mortar of mix 1:5 (1 cement
:5 coarse sand ) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls upto
300 mm height including rounding of junctions of walls and
slabs.
(c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar
of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-
in-charge including laying glass fibre cloth of approved quality
in top layer of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of 300x300 mm
square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test.“All
above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum
thickness at khurra as 65 mm. sqm 1398.50
22.8 Providing and laying four courses water proofing treatment with bitumen
felt over roofs consisting of first and third courses of blown bitumen
85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per
square metre of area for each course, second course of roofing felt
type 3 grade-I (hessian based self finished bitumen felt) and fourth
and final course of stone grit 6 mm and down size or pea sized
gravel spread at 6 cubic decimeter per square metre, including
preparation of surface but excluding grading complete with :
22.8.1 Bitumen felt (hessian base) type 3 grade I conforming
to IS : 1322 sqm 411.00
22.9 Providing and laying six courses water proofing treatment with
bitumen felt over roofs consisting of first, third and fifth course of
blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @
1.45, 1.20 and 1.45 Kg per square metre of area respectively, second
and fourth courses of roofing felt type 3 grade I conforming to IS :
1322 (Hessian based self finished bitumen felt) , sixth and final course
of stone grit 6 mm and down size or pea sized gravel spread at 6
cubic decimeter per sqm including preparation of surface but excluding
grading, complete. sqm 644.25

No.
bitumen felt over roofs consisting of first, third and fifth courses of
blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg
per square metre of area respectively, second and fourth courses of
roofing felt type 2 grade I (fibre base self finished bitumen felt) six
and final courses of stone grit 6 mm and down size or pea sized
gravel spread at 6 cubic decimeter per sqm including preparation of
surface, excluding grading, compete. sqm 734.25
bitumen felt over roofs consisting of first, third and fifth courses of
blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg
per square metre of area respectively, second and fourth courses of
roofing felt type 2 grade II (glass fibre base self finished bitumen felt)
and sixth and final course of stone grit 6 mm and down size or pea
sized gravel spread at 6 cubic decimeter per sqm including preparation
of surface but excluding grading, complete. sqm 734.50
22.12 Supplying and applying bituminous solution primer on roof and / or
wall surface at 0.24 litre per sqm. sqm 46.60
22.13 Deduct for omitting in water proofing treatment final course of
spreading stone grit 6 mm down size or pea sized gravel :
22.13.1 at 6 cudm per sqm sqm 14.85
22.13.2 at 8 cudm per sqm sqm 18.70
22.14 Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size) cum 6924.65
22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 12859.50
22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand) cum 11981.80
22.22 Providing and mixing integral crystalline admixture for waterproofing
treatment to RCC structures like basement raft, retaining walls,
reservior, sewage & water treatment plant, tunnels / subway and
bridge deck etc.. at the time of transporting of concrete into the
drum of the ready-mix truck , using integral crystalline admixture
@0.80% (minimum) to the weight of cement content per cubic meter
of concrete) or higher as recommended by the manufacturer’s
specification in reinforced cement concrete at site of work. The
material shall meet the requirements as specified in ACI-212-3R-
2010 i.e. by reducing permeability of concrete by more than 90%,
compared with control concrete as per DIN 1048 and resistant to 16

No.
bar hydrostatic pressure. The crystalline admixture shall be capable

of self-healing of cracks up to a width of 0.50mm. The work shall be
carried out all complete as per specification and the direction of the
Engineer-in-charge. The product performance shall carry guarantee
for 10 years against any leakage. kg 387.20
22.22A Providing and applying fibre reinforced elastomeric liquid water
proofing membrane with resilient acrylic polymers having Sun
Reflectivity Index (SRI) of 105 on top of concrete roof in three coats
@10.76 litre/ 10 sqm. One coat of self-priming of elastomeric
waterproofing liquid (dilution with water in the ratio of 3:1) and two
coats of undiluted elastomeric waterproofing liquid (dry film thickness
of complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly cleaning
the surface to remove loose particles with wire brushes, complete in
all respect as per the direction of Engineer-in-Charge. sqm 415.65
22.23 Providing and applying integral crystalline slurry of hydrophilic in
nature for waterproofing treatment to the RCC structures like retaining
walls of the basement, water tanks, roof slabs, podiums, reservior,
sewage & water treatment plant, tunnels / subway and bridge deck
etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline
slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral
crystalline slurry : 1 part water) for horizontal surfaces and applying
the same from negative (internal) side with the help of synthetic fiber
brush. The material shall meet the requirements as specified in ACI-
212-3R-2010 i.e by reducing permeability of concrete by more than
90% compared with control concrete as per DIN 1048 and resistant
to 16 bar hydrostatic pressure on negative side. The crystalline slurry
shall be capable of self-healing of cracks up to a width of 0.50mm.
The work shall be carried out all complete as per specification and
the direction of the engineer-in-charge. The product performance shall
carry guarantee for 10 years against any leakage.
22.23.1 For vertical surface two coats @ 0.70 kg per sqm sqm 484.45
22.23.2 For horizontal surface one coat @1.10 kg per sqm. sqm 373.40
22.23A Providing & Applying polymer modified, flexible cementatious negative
side waterproofing coating with elastic waterproofing polymers on
interior wall plaster surface in three coats @14.35 kg /10 sqm. one
coat of self priming of cementatious waterproofing polymer(dilution
with water in the ratio of 1:1) and two coats of cementatious
waterproofing polymer (dilution with water in the ratio of 3:1 ) after
scrapping and properly cleaning the surface to remove pre-existing
paint film & loose particles till plaster is visible, complete in all respect
as per the direction of Engineer-in-Charge. sqm 444.80
22.24 Providing and applying integral crystalline (dry shake) of hydrophilic
in nature for waterproofing treatment to the RCC structures like
basement raft, foundation slab, sewage & water treatment plant slab,
warehouses floor, parking structures and water tank base slab etc.
sprinkled @0.60kg per sqm or higher as recommended by the
manufacturer’s specification over the lean concrete of above cited
structures. The material shall meet the requirements as specified in
ACI-212-3R-2010 i.e. by reducing permeability of concrete by more

No.
than 85%, compared control concrete as per DIN 1048 and resistant
to 16 bar hydrostatic pressure on negative side. The crystalline dry-
shake shall be capable of self-healing of cracks up to a width of
0.50mm. The work shall be carried out all complete as per
specification and the direction of the Engineer-in-charge. The product
performance shall carry guarantee for 10 years against any leakage. sqm 327.65
22.24A Providing & Applying high quality acrylic modified resin based texture
of Dholpur/Red sand stone Pattern with anti algae and UV resistance
properties to be applied as intermediate finish in desired pattern @
43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping
and properly cleaning the surface to remove loose particles from the
plaster surface, followed by top coating with Premium Acrylic Smooth
exterior paint with Silicone additives of required shade by two
or more coats @ 1.43 litres/10 sqm, complete as the direction of
Engineer -in-Charge. sqm 424.25
22.25 Providing and applying crystalline mortar by mixing in the ratio of 4.5
: 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of
faulty construction joints, cracks, tie rod holes and spalled &
honeycombed surface of RCC underground structures like basement,
water tanks, bridge deck etc. to ensure water tightness. The crystallie
mortar shall conform to the EN 1504-3 having compressive strength
Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5
MPa. The work shall be carried out all complete as per specification
and the direction of the Engineer-In-Charge. The product performance
shall carry guarantee for 10 years against any leakage.
22.25.1 For sealing cracks and faulty construction joints, routed
out/making U-shape groove size 25x25mm and then
primed the area with integral crystalline slurry @0.05kg/
running metre and while the surface is tacky filled the
groove upto surface with crystalline mortar @1.50kg/
running metre. Once crystalline mortar is touch dry then
finally applied two coats of integral crystalline slurry
@0.05kg/running meter per coat. metre 525.70
22.25.2 For patching of tie rod holes, prepared tie rod hole surface
and then primed the area with integral crystalline slurry
@0.070kg/sqm and while the surface is tacky repair and
then filled the tie rod holes with crystalline
mortar@0.040kg per hole. The crystalline mortar should
be tightly rodded into tie rod holes or packed tightly (For
25x25x25 mm tie rod hole, use 0.040kg to fill the hole) each hole 20.75
22.26 Providing and applying of swellable type water stop tape, 19mm x
25mm thick in linear meter (expansive nature) for construction joints
treatment of RCC structure such as raft slab, retaining walls, water
storage tank and at the junctions of raft slab with the retaining walls
etc.. After cleaning the surface, one coat of required primer for
swellable water stop tape shall be applied throughout the length of
the joint @3.78 litre per 240 running meter. Over the primed surface
swellable type water stop tape shall be placed. The work shall be
carried out all complete as per specification and the direction of the
Engineer-In-Charge. The product performance shall carry guarantee
for 10 years against any leakage. metre 552.20

SUB HEAD : 23.0
RAIN WATER HARVESTING &

TUBEWELLS
394
BASIC RATES (SH: 23.0 RAIN WATER HARVESTING & TUBEWELLS)
No.
0005 Hire charges of Diesel Truck - 9 tonne day 2000.00
0020 Hydraulic Excavator (3D) with driver and fuel day 7000.00
0040 Air compressor 250 cfm with two leads for pneumatic cutters /
hammers day 1600.00
0134 Rock Hole Driller day 558.00
1235 Diesel litre 73.50
2319 Carriage of spun iron S & S pipes 100 mm dia 100 metre 226.82
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 226.82
7743 M.S. pipe 150 mm dia casing pipe metre 1126.00
7745 PVC blind pipe 150 mm dia as per IS: 12818 metre 508.62
7746 PVC blind pipe 200 mm dia as per IS: 12818 metre 788.12
7747 M.S. cap 150 mm dia each 150.00
7748 M.S. cap 200 mm dia each 200.00
7749 M.S bail plug 150 mm dia each 200.00
7750 M.S bail plug 200 mm dia each 220.00
7753 Stone Boulder 50 mm to 200 mm cum 850.00
7754 Gravel 5 mm to 10 mm cum 850.00
7755 Gravel 1.5 mm to 2 mm cum 850.00
SUB HEAD : 23.0 RAIN WATER HARVESTING & TUBEWELLS

395
No.
7756 Gravel 3 mm to 6 mm cum 850.00
7758 uPVC blind pipe 100 mm dia as per IS: 12818 metre 442.00
7759 uPVC slotted pipe 100 mm dia as per IS: 12818 metre 480.00
7760 M.S. cap 100 mm dia each 135.00
7761 M.S. bail plug 100 mm dia each 160.00
7762 Precast R.C.C. perforated slab each 875.00
7763 Water supply tanker of 5000 litre capacity each 900.00
7764 M.S. socket 100 mm dia each 125.00
7772 Pea Gravel cum 950.00

396
23.0 RAIN WATER HARVESTING & TUBEWELLS
No.
23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction
of Engineer-in-charge, upto 90 metre depth below ground level.
23.1.1 All types of soil
23.1.1.1 300 mm dia metre 512.30
23.1.1.2 350 mm dia metre 560.30
23.1.1.3 400 mm dia metre 717.20
23.1.2 Rocky strata including Boulders
23.1.2.1 300 mm dia metre 1223.20
23.1.2.2 350 mm dia metre 1293.80
23.1.2.3 400 mm dia metre 1538.95
23.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction
of Engineer -in-charge, beyond 90 metre & upto 150 metre depth
below ground level.
23.2.1 All types of soil
23.2.1.1 300 mm dia metre 597.65
23.2.1.2 350 mm dia metre 664.05
23.2.1.3 400 mm dia metre 896.50
23.2.2 Rocky strata including Boulders
23.2.2.1 300 mm dia metre 1349.95
23.2.2.2 350 mm dia metre 1411.75
23.2.2.3 400 mm dia metre 1808.50
23.3 Supplying, assembling, lowering and fixing in vertical position in bore
well, unplasticized PVC medium well casing (CM) pipe of required
dia, conforming to IS: 12818, including required hire and labour
charges, fittings & accessories etc. all complete, for all depths, as
per direction of Engineer -in-charge.
23.3.1 100 mm nominal size dia metre 600.35

397
No.

well unplasticized PVC medium well screen (RMS) pipes with ribs,
conforming to IS: 12818, including hire & labour charges, fittings &
accessories etc. all complete, for all depths, as per direction of
Engineer-in-charge.
23.5 Supplying, filling, spreading & leveling stone boulders of size range
5 cm to 20 cm, in recharge pit, in the required thickness, for all leads
& lifts, all complete as per direction of Engineer-in-charge. cum 1326.55
23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing layer of boulders, in
required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge. cum 1326.55
23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer,
for all leads & lifts, all complete as per direction of Engineer -in-
charge. cum 1326.55
23.8 Gravel packing in tubewell construction in accordance with IS: 4097,
including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of
Engineer-in-charge. cum 1497.70
23.9 Providing and fixing factory made precast RCC perforated drain covers,
having concrete of strength not less than M-25, of size 1000 x 450x50
mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross
sectional T.M.T. hoop bars, including providing 50 mm dia perforations
@ 100 to 125 mm c/c, including providing edge binding with M.S.
flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-
in-charge. each 1210.85
well, ERW (Electric Resistance Welded) FE 410 mild steel screwed
and socketed/plain ended casing pipes of required dia, conforming
to IS: 4270, of reputed & approved make, including painted with
outside surface with two coats of anticorrosive paint of approved
brand and manufacture, including required hire & labour charges,
fittings & accessories, all complete, for all depths, as per direction
of Engineer-in-charge.
23.10.1 100 mm nominal size dia having minimum wall thickness
5.00 mm metre 1187.95
5.00 mm metre 1661.85
5.40 mm metre 2062.05

398
No.

well, ERW (Electric Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain
bevel ended pipe (type A) of required dia, conforming to IS: 8110, of
reputed and approved make, having wall thickness not less than
5.40 mm, including painted with outside surface with two coats of
anticorrosive bitumestic paint of approved brand and manufacture,
including hire & labour charges, fittings & accessories, all complete,
for all depths, as per direction of Engineer -in-charge.
23.12 Development of tube well in accordance with IS : 2800 (part I) and IS:
11189, to establish maximum rate of usable water yield without sand
content (beyond permissible limit), with required capacity air
compressor, running the compressor for required time till well is fully
developed, measuring yield of well by “V” notch method or any other
approved method, measuring static level & draw down etc. by step
draw down method, collecting water samples & getting tested in
approved laboratory, i/c disinfection of tubewell, all complete, including
hire & labour charges of air compressor, tools & accessories etc.,
all as per requirement and direction of Engineer-in-charge. hour 857.60
23.13 Providing and fixing suitable size threaded mild steel cap or spot
welded plate to the top of bore well housing/ casing pipe, removable
as per requirement, all complete for borewell of:
23.13.1 100 mm dia each 189.65
23.13.2 150 mm dia each 210.75
23.13.3 200 mm dia each 280.95
23.14 Providing and fixing M.S. clamp of required dia to the top of casing/
housing pipe of tubewell as per IS: 2800 (part I), including necessary
bolts & nuts of required size complete.
23.14.1 100 mm clamp each 1409.30
23.14.2 150 mm clamp each 1489.80
23.14.3 200 mm clamp each 1691.15
23.15 Providing and fixing Bail plug/ Bottom plug of required dia to the
bottom of pipe assembly of tubewell as per IS:2800 (part I).
23.15.1 100 mm dia each 227.45
23.15.2 150 mm dia each 280.95
23.15.3 200 mm dia each 307.75

399
SUB HEAD : 24.0
CONSERVATION
OF
HERITAGE BUILDINGS
400
BASIC RATES (SH: 24.0 CONSERVATION OF HERITAGE BUILDINGS)
No.
0128 Mate day 617.00
0773 Unslaked lime quintal 300.00
1034 Bolts and nuts up to 300 mm in length quintal 4800.00
1182 Surkhi cum 700.00
4009 Mild steel tubes hot finished welded type kg 57.00
7346 Double coupler each 46.00
7387 Spigot for standard jointing kg 43.00
7397 Base Jack each 145.00
7398 Challies each 765.00
7399 Cup locks each 48.00
7767 Stone cleaning chemical approved by ASI litre 295.00
7768 Water repallent chemical approved by ASI litre 1200.00
7769 Stone surface strengthening chemical approved by ASI litre 900.00
7770 Turpentine oil litre 55.00
7771 Liquid Ammonia 5% litre 160.00
7775 Sodium pentachlorophenate kg 550.00
SUB HEAD : 24.0 CONSERVATION OF HERITAGE BUILDINGS

401
24.0 CONSERVATION OF HERITAGE BUILDINGS
No.
24.1 Raking out joints of stone masonry surface to the required width and
depth, with due care and precaution, by mechanical / manual means,
including preparing and cleaning the surface for re-pointing/ refilling
of joints, including disposal of rubbish to the dumping ground within
50 metre lead. sqm 51.70
24.2 Providing and fixing double scaffolding system (cup lock type) on
the exterior side of building/structure, upto 25 metre height, above
ground level, including additional rows of scaffolding in stepped manner
as per requirement of site, made with 40mm dia M.S. tube, placed
1.5 metre centre to centre, horizontal & vertical tubes joint with cup
& lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and
staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for execution of work of
cleaning and/ or pointing and/ or applying chemical and removing it
thereafter. The scaffolding system shall be stiffened with bracings,
runners, connecting with the building etc, wherever required, if feasible,
for inspection of work at required locations with essential safety
features for the workmen etc., complete as per directions and approval
of Engineer-in-charge.
Note:- (1) The elevational area of the scaffolding shall be measured
for payment purpose. (2) The payment will be made once only for
execution of all items for such works. sqm 257.95
24.3 Cleaning the sand stone surface and removing dirt, dust, bird dropping,
grease, oil, algae, fungus, monkey beats, vegetable growth etc.,
including providing, applying and washing the surface with liquid
Ammonia Chemical of 5% solution and other chemical cleaning agent
as approved by Archaeological Survey of India/ Engineer-in-charge,
of approved brand and manufacturer, with the help of required
scrubbers and also cleaning with machine operated water jet mixed
with desired quantity of fine silica where ever required, without causing
any scratching/ damage to the stone surface and finally washing the
surface with clean water with the help of pressure jet machine,
complete in all respect, including taking all precautions to safeguard
ventilators, windows, doors etc. by suitable covering so as to avoid
any damage to the building/structure, all as per direction of Engineer-
in-charge (The rate is inclusive of all materials & labours involved
except scaffolding). sqm 158.15
24.4 Providing and applying antifungal wash treatment using 3% solution
of sodium pentachlorophenate, of reputed brand and manufacturer,
on cleaned sand stone surface at desired locations as per direction
of Engineer-in-charge (The rate is inclusive of all materials & labours
involved except scaffolding). sqm 59.05
24.5 Ruled / Flush pointing on Red sand stone masonry surface with
lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble
dust}. (The rate is inclusive of all materials & labours involved except
scaffolding). sqm 276.10
SUBHEAD : 24.0 CONSERVATION OF HERITAGE BUILDINGS

402
No.
24.6 Ruled/ Flush pointing on White sand stone masonry surface with
lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2
marble dust}. (The rate is inclusive of all materials & labours involved
except scaffolding). sqm 276.10
24.7 Applying two or more coat of Ethyl Silicate chemical as approved by
Archaeological Survey of India/ Engineer-in-charge, of approved brand
and manufacturer, with brush or spray on the existing stone masonry
surface till there is no further absorption of chemical by stone surface,
including protecting the applied surface from direct sunlight by suitable
means during application, all complete as per direction of the
Engineer-in-Charge (The rate is inclusive of all materials & labours
24.8 Applying breathable, non-reactive, antifungal, and water repellant
Silane/Siloxane chemical as approved by Archaeological Survey of
India/ Engineer-in-charge, of approved brand and manufacture, diluted
with solvent mineral Turpentine oil in the ratio of 1:12 (One part of
approved chemical :12 Part of Turpentine oil), on the existing sand
stone masonry surface with two or more coats to give uniform
application of chemical on the surface, all complete as per direction
of Engineer-In-charge (The rate is inclusive of all materials & labours
SUBHEAD : 24.0 CONSERVATION OF HERITAGE BUILDINGS

403
SUB HEAD : 25.0
STRUCTURAL GLAZING
ALUMINIUM COMPOSITE PANEL
404
BASIC RATES (SH: 25.0 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
No.
2415 21 mm thick clear toughened laminated glass for fins with holes sqm 6000.00
2605 Structural sealant - 6 mm x 12 mm metre 30.00
2606 Spacer tape 6.4 mm thick x 6 mm wide metre 20.00
2607 Weather Sealant - Non Staining (600 ml) each 325.00
2608 Weather Sealant - Normal (300 ml) each 98.00
2609 MS Brackets/Aluminium Alloy Brackets kg 100.00
2610 Silicon Gasket in Kg (Above 50 g / m) kg 465.00
2611 EPDM Gasket in Kg (Above 60 g / m) kg 150.00
2612 Anchor Fastner - M10 each 10.00
2613 SS Bolt with washer of different sizes for structural glazing /
ACP Cladding each 35.00
2614 SS Screws of sizes for structural glazing / ACP Cladding each 3.00
2615 Protective Tape metre 20.00
2616 GI flashing - 1.2 mm Thick kg 59.00
2617 6 mm thick High performance glass sqm 1000.00
2618 6 mm thick clear heat strengthened glass sqm 650.00
2619 6 mm thick clear heat strengthened glass each 128.00
2620 ARMS GS HD - Top Hung -20"- Type P- Couple pair 1350.00
2621 Connection Block for vision glass panel each 35.00
2622 Curtain wall striker for vision glass panel each 85.00
2623 Adjustable Fastening Pawl for vision glass panel each 35.00
2624 Corner drive for vision glass panel each 255.00
2625 Top wedge Block for vision glass panel each 120.00
2626 Glass wool of denisity @ 48 Kg / cum with black glass
tissue (BGT) sqm 250.00
2627 SS Screws - # 8 x 19 each 6.00
2628 Weather Sealant - DC 789 cartridge 120.00
2629 Cement Board sqm 235.00
2630 Baker rod metre 5.00
2631 4 mm thick ACP sqm 1100.00
2632 Fire Stop metre 480.00
2634 GI/Aluminium Sheet (0.8 mm thick) kg 55.00
SUB HEAD : 25.0 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
405
No.
7392 Powder coating 50 microns on aluminium sections kg 61.00
8559 stainless steel U channel of size (50x25x2 mm) metre 160.00
8560 Non straining water resistant clear silicon metre 65.00
8654 Masking tape metre 1.95
8778 Toughened glass 12 mm thickness sqm 1747.00
8945 4 Point facade glass bracket without flat head bolts Nos 3318.00
8946 2 Point facade glass bracket (wall mounted without flat head bolt) Nos 1659.00
8947 1 Point facade glass bracket (wall mounted without flat head bolt) Nos 1300.00
8948 Flate head bolt for brackets of spider glazing Nos 651.00
8949 400 mm long fin plate without fastners pair 5931.00

406
25.0 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
No.
25.1 Providing and supplying aluminium extruded tubular and other
aluminium sections as per the architectural drawings and approved
shop drawings , the aluminium quality as per grade 6063 T5 or T6 as
per BS 1474,including super durable powder coating of 60-80 microns
conforming to AAMA 2604 of required colour and shade as approved
by the Engineer-in-Charge. ( The item includes cost of material such
as cleats, sleeves, screws etc. necessary for fabrication of extruded
aluminium frame work. Nothing extra shall be paid on this account).
The weight of aluminium extruded section shall be taken for
purpose of payment. kg 370.45
25.2 Designing, fabricating, testing, protection, installing and fixing in
position semi (grid) unitized system of structural glazing (with open
joints) for linear as well as curvilinear portions of the building for all
heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for
the specified design loads conforming to IS 875 part III (the system
must passed the proof test at 1.5 times design wind pressure
without any failure), including functional design of the aluminum
sections for fixing glazing panels of various thicknesses, aluminium
cleats, sleeves and splice plates etc. gaskets, screws, toggles,
nuts, bolts, clamps etc., structural and weather silicone sealants,
flashings, fire stop (barrier)-cum-smoke seals, microwave cured
EPDM gaskets for water tightness, pressure equalisation &
drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised /
Aluminium alloy of 6005 T5 brackets of required sizes, sections
and profiles etc. to accommodate 3 Dimentional movement for
achieving perfect verticality and fixing structural glazing system
rigidly to the RCC/ masonry/structural steel framework of building
structure using stainless steel anchor fasteners/ bolts, nylon
seperator to prevent bimetallic contacts with nuts and washers
etc. of stainless steel grade 316, of the required capacity and in
required numbers.
(c) Providing and filling, two part pump filled, structural silicone
sealant and one part weather silicone sealant compatible with
the structural silicone sealant of required bite size in a clean
and controlled factory / work shop environment, including double
sided spacer tape, setting blocks and backer rod, all of approved
grade, brand and manufacture, as per the approved sealant
design, within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet
1 mm thick and of sizes, shapes and profiles, as required as per
the site conditions, to seal the gap between the building structure
and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the
curtain glazing system to make it watertight, by incorporating

407
No.
principles of pressure equalization, providing suitable gutter profiles

at bottom (if required), making necessary holes of required sizes
and of required numbers etc. complete. This item includes cost of
all inputs of designing, labour for fabricating and installation of
aluminium grid, installation of glazed units, T&P, scaffolding and
other incidental charges including wastages etc., enabling temporary
structures and services, cranes or cradles etc. as described above
and as specified. The item includes the cost of getting all the
structural and functional design including shop drawings checked
by a structural designer, dully approved by Engineer-in-charge. The
item also includes the cost of all mock ups at site, cost of all
samples of the individual components for testing in an approved
laboratory, field tests on the assembled working structural glazing
as specified, cleaning and protection till the handing over of the
building for occupation. In the end, the Contractor shall provide a
water tight structural glazing having all the performance
characteristics etc. all complete as required, as per the Architectural
drawings, as per item description, as specified, as per the approved
shop drawings and as directed by the Engineer- in-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow
boxes, extruded aluminium section capping for fixing in the grooves
of the curtain glazing and vermin proof stainless steel wire mesh
shall be paid for separately under relevant items under this sub-
head. However, for the purpose of payment, only the actual area of
structural glazing (including width of grooves) on the external face
shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted
on structural glazing system if area of structural glazing
exceeds 2500 Sqm from the certified laboratories accreditated
by NABL(National Accreditation Board for Testing and
Calibration Laboratories), Department of Science &
Technologies, India. Cost of testing is payable separately.
The NIT approving authority will decide the necessity of testing on
the basis of cost of the work, cost of the test and importance of the
work. Performance Testing of Structural glazing system Tests to be
conducted in the NABL accredited lab or by any other
accreditation body which operates in accordance with ISO /
IEC 17011 and accredits labs as per ISO/ IEC 17025.
1. Performance Laboratory Test for Air Leakage Test (-50pa
to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04
testing method for a range of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500p) as per
ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA
501.01- 05 testing method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static
air pressure test (1.5 times design wind pressure without
any failure) as per ASTME-330-10 testing method for a
range upto 50 mm
408
No.
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-

09 testing method for Qualitative test, Tests to be
conducted on site.
6. Onsite Test for Water Leakage for a pressure range 50
kpa to 240 kpa (35psi) upto 2000 ml sqm 2949.30
25.3 Providing, assembling and supplying vision glass panels (IGUs)
comprising of hermetically-sealed 6-12- 6 mm insulated glass (double
glazed) vision panel units of size and shape as required and specified,
comprising of an outer heat strengthened float glass 6mm thick, of
approved colour and shade with reflective soft coating on surface # 2
of approved colour and shade, an inner Heat strengthned clear float
glass 6mm thick, spacer tube 12mm wide, dessicants, including
primary seal and secondary seal (structural silicone sealant) etc. all
complete for the required performances, as per the Architectural
drawings, as per the approved shop drawings, as specified and as
directed by the Engineer-in-Charge. The IGUs shall be assembled in
the factory/ workshop of the glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in
cost of item No.25.2)
For payment, only the actual area of glass on face # 1 of the glass
panels (excluding the areas of the grooves and weather silicone
sealant) provided and fixed in position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective
soft coating on face # 2, + 12mm Airgap + 6mm Heat
Strengthened clear Glass of approved make having properties
as visible Light transmittance (VLT) of 25 to 35 %, Light reflection
internal 10 to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree
K etc. The properties of performance glass shall be decided by
technical sanctioning authority as per the site requirement. sqm 3250.95
25.4 Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such as
heavy duty stainless steel friction hinges, min 4 -point cremone
locking sets with stainless steel plates, handles, buffers etc. including
necessary stainless steel screws/ fasteners, nuts, bolts, washers
etc. all complete as per the Architectural drawings, as per the
approved shop drawings, as specified and as directed by the Engineer-
in-Charge. sqm 3163.10
25.5 Providing, fabricating and supplying shadow box of required size and
shape, for fixing in the spandrel portion of the structural glazing, in
linear as well as curvilinear portions of the building by providing semi
-rigid, inorganic, non-combustible fibre glass wool insulation 50 mm
thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation
layer shall have facing (factory bonded on surface # 1 of the fibre
glass insulation layer), of black non-woven fibre glass tissue of nominal
thickness 0.5 mm and nominal mass not less than 60 gm /sqm,
made of randomly oriented glass fibres distributed in a binder by a

409
No.
wet-lay process including fixing 1.5 mm thick solid aluminum sheet

backing using, 6 mm thick cement board including SS rivets, nuts,
bolts, washers etc complete. sqm 1883.55
25.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm
thick heat strengthened monolithic float glass of approved colour
and shade with reflective soft coating on surface # 2 of approved
colour and shade so as to match the colour and shade of the IGUs in
the vision panels etc. ,all complete for the required performances as
specified, as per the Architectural drawings, as per the approved
shop drawings, as specified, and as directed by the Engineer- in-
Charge.
For payment, only the actual area of glass on face # 1 of the glass
panels (but excluding the area of grooves and weather silicone sealant)
provided and fixed in position, shall be measured in sqm. (Payment
for fixing of Spandrel Glass Panels in the curtain glazing is included
in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick
substrate with reflective soft coating on face # 2, having properties
as visible Light transmittance (VLT) of 25 to 35 %, Light reflection
internal 10 to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The
properties of performance glass shall be decided by technical
sanctioning authority as per the site requirement. sqm 2127.95
25.7 Item Shifted to Sub Head 8 as Item no 8.32
25.8 Design supply & installation of suspended Spider Glazing system
designed to withstand the wind pressure as per IS 875 (Part-III). The
Suspended System held with Spider Fittings of SS-316 Grade Steel
of approved manufacturer with glass panel having 12 mm thick clear
toughened glass held together with SS- 316 Grade Stainless steel
Spider & bolt assembly with laminated glass fins 21 mm thick. The
Glass fins and glass panel assembly shall be connected to Slab/
beams by means of SS- 316 Grade stainless steel brackets & Anchor
bolts and at the bottom using SS channel of 50x25x2mm using
fastener & anchor bolts, non staining weather sealants of approved
make, Teflon/ nylon bushes and separators to prevent bi-metallic
contacts, all complete to perform as per specification and approved
drawings. The complete system to be designed to accommodate
thermal expansion & seismic movements etc. The joints between
glass panels (6 to 8 mm) and gaps at the perimeter & in U channel
of the assembly to be filled with non staining weather sealant, so as
to make the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing
including approval from structural designer, labour, T&P, scaffolding,
other incidental charges including wastage, enabling temporary
services all fitting fixers nut bolts, washer, Buffer plates, fastener,
anchors, SS channel laminated glass etc. all complete. For the
purpose of payment, actual elevation area of Glazing including
thickness of joints and the portion of Glass panel inside the SS
channel shall be measured. sqm 8130.45

410
SUB HEAD : 26.0
NEW TECHNOLOGIES AND

MATERIALS
411
BASIC RATES (SH: 26.0 NEW TECHNOLOGIES AND MATERIALS)

No.
0009 Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc. cum 210.00
0011 Hire charges of Pump set of capacity 4000 litres/hour day 700.00
0014 Front end loader capacity 1.00 cum day 6000.00
0028 Hire and running charges of crane 20 tonne capacity day 7000.00
0030 Generator 250 KVA day 2500.00
0031 Steam curing by using boiler /Heater cum 500.00
0032 Stressing Machine (jack with pump) day 11500.00
0034 Cutting saw machine day 1350.00
0035 Strands Roller machinery for laying strands day 3500.00
0036 Bed master (Pulling strands) day 3000.00
0037 Mobile crane day 7500.00
0044 Cost for crane upto 40 tonne capacity day 8000.00
0067 Cost for crane upto 80 tonne capacity day 15000.00
0070 Generator 100 KVA/125 KVA hour 250.00
0072 Cost for crane having capacity 50MT day 8500.00
0086 Compressor, gun, rubber pipes & other accessories- hire charge
of plant & machinery i/c necessary fuel day 4000.00
0088 Hire charges of Drill machine upto 30 mm dia day 160.00
0089 Hire charges of sand blasting equipment day 160.00
0090 Hire charges of compressor day 420.00
0091 Welding charges of shear key to existing reinforcement each 5.00
0092 Hire charges of plant and Machinery that can inject 350 kg/day day 200.00
0122 Mason (for plaster of paris work) 1st class day 738.00
SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALS

412
No.
0127 Driver for (Road roller, concrete mixer, Trucks etc.) day 738.00
0128 Mate day 617.00
0129 Sewer man day 558.00
0132 Rock Excavator day 558.00
0133 Rock Breaker day 558.00
0134 Rock Hole Driller day 558.00
0135 Stone Chiseller day 617.00
0154 Nozzel man/ gun man day 738.00
0157 Operator (Pile/ Special machine) day 738.00
0161 Helper (Technician) day 558.00
0164 Security guard without gun (8 hours shift duty per day) day 617.00
0165 Security guard with gun (8 hours shift duty per day) day 679.00
0238 6 mm thick heavy duty fiber cement board sqm 470.00
0239 8mm thick heavy duty fiber cement board sqm 300.00
0240 9 mm thick heavy duty fiber cement board sqm 625.00
0241 12.5 mm thick Gypsum plaster board sqm 170.00
0244 Factory made light weight composite non asbestos fibre reinforced
aerated cement sandwitched wall/roof panel (50mm thick). The outer
face on both sides of the panels will be non asbestos fibre cement
board (minimum 4mm thick) confirming to IS 14862:2000 sqm 634.00
0245 Factory made light weight non asbestos fibre reinforced aerated
cement sandwitched wall/roof panel (75mm thick). The outer face
on both sides of the panels will be non asbestos fibre cement
board (minimum 5mm thick) confirming to IS 14862:2000 sqm 789.00
0246 2mm thick sim pad each 10.00

413
No.
0764 Calcium silicate base compound for jointing calcium silicate tiles kg 26.00
0993 FY-1860 grade wire strands quintal 5700.00
1012 Pregalvanized high tensile steel confirming to IS:277-199 kg 90.00
1021 Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less
than 7.75 kg/sqm sqm 430.00
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 120.00
1027 Erection Bolts ( Minimum 04 nos for each element) each 25.00
1159 Stone dust cum 1100.00
1190 Second class teak wood in planks 10 cudm 791.00
1208 Bitumen washer 100 Nos 30.00
1209 G.I. plain washer thick 100 Nos 35.00
1217 GI Wire mesh 100x100 mm kg 75.00
1218 Shear stud each 50.00
1223 Steel weld mesh sqm 150.00
1225 Mild steel flat strap fitting quintal 4120.00
1246 Silicon based Joint Sealant for Tiles kg 160.00
1247 Rubber base Adhesive kg 223.00
1248 Epoxy based sealing Compound kg 535.00
1249 Acrylic based sealing compound kg 500.00
1250 Non woven reinforcement Tape metre 0.14
1251 M-60 grade cemetitious grout (Non Shrink) kg 28.00
1252 Cementitious polymer base adhesive confirming to EOTA
ETAG 004 (European Technical Approval) kg 34.00
1253 Polypropylene mechanical fastener with plastic pin confirming
to EOTA ETAG 014 (European Technical Approval) having dia
10mm & L=200mm each 30.00
1254 Moisture cure Polyurethane Foam 750 ml 600.00
1255 PVC Corner Bead of size 25mmx25mm fixed with glass fibre
mesh (100mm x 100mm) metre 90.00
1256 Cementitious polymer base coat confirming to EOTA ETAG 004
(European Technical Approval) kg 40.00
1257 Fiberglass mesh with alkali-resistant coating having mass per
unit area ?145 g/m2, mesh size: 3.9x4.0 mm ±10% sqm 75.00
1316 50mmx50mm hardwood plug each 75.00
2204 Carriage of Timber cum 118.59
2261 Carriage of Fine sand (1 Part badarpur sand : 2 parts jamuna sand) cum 103.77
2358 Carriage of Bamboo Mat corrugated sheets and accessories tonne 11500.00
2491 Pre laminated both side solid foam uPVC profile (45x20mm) metre 130.00
2492 Solid foam uPVC sheet 20mm thick pre laminated on both side sqm 2090.00
2493 PVC edge beading metre 31.00
2494 Expandable fastner with plastic sleeve each 5.00
2635 GI Screws of gauge 10, length 25 mm for fixing cement fibre
board to C section each 3.00
414
No.
2636 GI Screws of gauge 10, length 45 mm for fixing cement fibre
board to C section each 3.00
2637 Vapour barrier sqm 175.00
7009 12.5 mm thick tapered edge gypsum plain borad sqm 155.00
7025 Self tapping pan head nickel coated mild steel screws of size
13 x 3.2 mm 1000 Nos 525.00
7026 Fibre joint tape 50 mm wide (90 metre) roll each roll 165.00
7274 Glass wool 50 mm thick sqm 238.00
7318 Plasticizer / super plasticizer kg 36.00
7336 Lock Bar (E 250) - 10 thick MS Plate kg 76.00
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section
of size 50x32 mm metre 57.00
7368 GFRG Panel of 124 mm thick sqm 847.46
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x
36 mm metre 71.00
7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash
fastener each 7.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 11.00
7776 Concrete paver block of grade M-30 made of C&D waste (60mm
thickness) sqm 317.22
7911 Chemical Rust Remover litre 210.00
7912 Hire charges of Drill machine upto 30 mm dia day 160.00
7913 Epoxy kg 585.00
7914 SBR Polymer kg 190.00
7915 Woven PVC cloth sqm 25.00
7916 Hire charges of sand blasting equipment day 420.00
7917 Hire charges of compressure day 645.00
7918 25mm thick cement concrete shotcrete(guniting) with compressor sqm 105.00
7921 Adhesive chemical ml 2.00
7922 Bit of drilling machine for Hole upto 30mm dia each 500.00
7923 GI injection nipple 12mm dia, 75mm long each 42.00
7924 Blowing compressed air for cleaning holes upto 30mm dia each 10.00
7925 L shaped 100mm long, 10mm dia mild steel shear key kg 67.00
7927 Acrylic Polymer chemical for cracks kg 31.00
7929 Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos
on each side each 192.00
7930 dowel tubes (Corrugated GI pipes 50 to 80mm dia) (For horizontal
joints) metre 120.00
7931 Hooks for lifting (Alloy steel) having 2.5 tonne capacity each 250.00
7996 Factory made EPS light weight composite sandwitched wall/
roof panel (50mm thick) having core material of EPS granule
balls/beads (conforming to IS 4671:1984 and shall have density

415
No.
not less than 15kg per cum). The outer face on both sides of the
panels will be non asbestos fiber cement board confirming to IS
14862:2000 or Calcium silicate board confirming to EN
14306:2009 of 5mm thick each. sqm 735.25
panels will be non asbestos fiber cement board confirming
to IS 14862:2000 or Calcium silicate board confirming to EN
14306:2009 of 5mm thick each sqm 845.00
8013 Factory made EPS Core wallpanel /roof panel sandwiched be-
tween two Engineered welded wire fabric mesh of 3 mm dia G.I.
wire mesh,with 50 mm pitch in both the directions, kept at 120-
135 mm gap and interconnected by the zig zag G.I. wire of 3
mm dia at alternate row by welding. sqm 1650.00
8015 Expanded poly ethylene Foam sheet 4mm thick of Density
40kg/m3 sqm 18.00
8016 High Density expanded poly ethylene (EPE) Foam 1mm thick sqm 8.50
8019 GI sheet 0.8 mm thick confirming to IS 277:1992 kg 75.00
8020 Factory made EPS Core wall panel /roof panel sandwiched be-
tween two Engineered welded wire fabric mesh of 3 mm dia G.I.
wire mesh, with 50 mm pitch in both the directions, connected
by G.I. wire of 3mm dia at alternate row by welding sqm 600.00
8021 Bamboo wood Tile Flooring 14mm thick of minimum size 1800mm
x130mm sqm 3470.00
8022 Bamboo wood Quarter Round 18mm thick of size 1900mm x 18mm metre 112.00

416
No.
8023 Bamboo wood door reducer 14mm thick of size 1900mm x 44mm metre 255.00
8024 Bamboo wood Skirting 14mm thick of Size 1900mm x 85mm metre 300.00
8025 Bamboo wood Tile Wall Cladding 10mm thick of size 1900mm x
135mm sqm 3385.00
8026 Bamboo wood T-mold 14mm thick of size 1900mm x 44mm metre 250.00
8027 Bamboo wood Threshold 14mm thick of size 1900mm x 44mm metre 255.00
8028 Bamboo wood shutter of doors 10 cudm 1700.00
8029 Bamboo wood panelling (10mm thick) 10 cudm 1680.00
8030 Superior class Bamboo wood door frame 65 mm thick, 10 cudm 1675.00
8031 Aluminium sheets Grade 5052, 4 mm thick for wall panel/deck
panel/WRB panel/Kicker Panels/door closing panels ( for form
work) sqm 8500.00
8032 Aluminium sheets Grade 5052, 4 mm thick for Internal Corner/
Column Corners/ ( for form work) sqm 11500.00
8033 Aluminium sheets Grade 5052, 4 mm thick for Mid Soldier/End
soldier (for form work) sqm 32000.00
Accessories for aluminium form work
8034 External corner 2050 mm each 1400.00
8035 External corner 825 mm each 590.00
8036 soldier tie 370mm each 290.00
8037 Adjustable prop-2.0 x2.0 m each 1080.00
8038 Pin-50 each 15.00
8039 Pin-127 each 55.00
8040 wedge each 14.00
8041 wall tie-150 (355 mm ) each 45.00
8042 Polythene Sleeve 90 x 150mm each 3.00
8043 Polythene Roll - 150mm Long. each 6.00
8044 Vertical Soldier -1100mm each 365.00
8045 Wall Attached Bracket 600x1000mm each 985.00
8046 Allignment Pipe - 3.00 Mtr. each 995.00
8047 Allignment Bracket each 475.00
8048 Tie Rod for Bracket - 500mm each 115.00
8049 Anchor Wing Nut Ø100 mm each 64.00
8050 Debit Pin - 250mm each 60.00
8051 PVC Pipe Ø20mm - 150mm long each 5.00
8052 PVC Cone each 5.00
8053 Bolt+Nut - 16 x 80 mm each 30.00
8054 Flat Washer Ø16, 3mm thik each 5.00
8055 Bolt+Nut - 16 x 30 mm each 18.00

417
No.
8056 Door spacer 45x45x5-1135mm Long each 360.00

8057 Door spacer 45x45x5-1135mm Long each 315.00
8144 Bamboo Mat corrugated sheets 3.5 to 4mm thick conforming to
IS 15476:2004 sqm 2648.00
8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conforming to IS
15476:2004 metre 2570.00
8146 3mm thick Bamboo Mat Board conforming to IS 13958:1994 sqm 1508.00
8210 Stainless steel screws 50 mm 100 Nos 270.00
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 265.00
8226 Concealed zinc coated hinges 19-20 mm thick with mounting
plate 10 Nos 420.00
8514 40 mm long S.S screws with plastic rawl plugs 100 40.00
8515 Galavanised MS 8 mm outer diameter M-6 dash fastener 50mm
long each 31.00
8516 ZMB 60/equivalent kg 105.00
8517 ZMB thinner litre 205.00
8518 Zycoprime / equivalent litre 210.00
8519 Zycosil / equivalent litre 1800.00
8520 Elastobar / equivalent kg 300.00
8552 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,
16 mm thick sqm 830.00
8553 Mineral fibre beveled tegular edged ceiling tiles 595 x595mm,
16 mm thick with bio-block conforming to ISO 5 (class 100)
specifications. sqm 920.00
8554 Mineral fiber beveled tegular edged ceiling tiles 595 x595mm,
20 mm thick. sqm 1040.00
8555 G.I main runner 15 x32 mm of 3000 mm length, 0.33 mm thick each 185.00
8556 G.I cross-T 15 x32 mm of 1200 mm length, 0.33 mm thick each 78.00
8557 G.I cross-T 15 x32 mm of 600 mm length, 0.33 mm thick each 35.00
8558 G.I hanger rod 6mm dia fully threaded upto 1000 mm length each 26.00
8559 Stainless steel U Channel of size (50x25x2mm) metre 160.00

418
No.
8560 Non staining water resistant clear silicon metre 65.00

8561 Extruded polystyrene rigid insulation board 50 mm thick sqm 525.00
8562 Expanded Polystyrene insulation board 120 mm thick confirm-
ing to IS 4671-1984, Fire retardant property self-extinguishing
type as per EN 13501-1 sqm 800.00
8563 15 mm thick, light weight, integral densified micro look edged,false
ceiling tiles of size 595x595 mm. sqm 720.00
8564 15 mm thick, light weight,fully perforated square/butt edge inte
gral densified,false ceiling tiles of size 595x595 mm. sqm 900.00
8565 Galavanised MS hanger rod 6 mm dia MS fully threaded up to
1000mm length each 26.00
8566 Powder coated steel section main-T ceiling sections 15x42x0.40
mm (3000 mm long) each 235.00
8567 Galvanized mild steel perimeter wall angle 22x19x0.40 mm
(3000mm long) each 115.00
8568 Powder coated Galvanised Iron intermediate cross-T section
15x42x0.40 mm (1200 mm long) each 95.00
8569 Powder coated Galvanized Iron intermediate cross-T section
15x42x0.40mm (600 mm long ) each 47.00
8570 GI Main T ceiling section 30x25x0.3 mm (3 metre long) each 187.00
8571 GI Perimeter wall angle 25x25x0.4 mm (3 metre long) each 157.00
8572 GI Intermediate cross T section 25x25x0.3 mm (1.2 metre long) each 72.00
8573 GI Intermediate cross T section 25x25x0.3 mm (0.6 metre long) each 34.00
8579 Cold form light gauge Steel C-section of thickness 0.75mm i/c
zink coating/sliting etc. kg 130.00
8580 Wastage of cold form light gauge steel kg 17.00
8581 12 mm thick micro tegular edged semi perforated GRG (Glass
Fibre Reinforced Gypsum) false celing tiles of Size 595x595 mm sqm 510.00
8582 12 mm thick micro tegular edged fully perforated GRG (Glass
Fibre Reinforced Gypsum) false celing tiles of Size 595x595 mm sqm 600.00
8583 10 mm thick square edge fully perforated GRG(Glass Fibre Re
inforced Gypsum) false celing tiles of Size 595x595 mm sqm 750.00
8587 Galvanized iron intermediate cross-T section 15x32x0.33 mm
(600mm long) each 35.00
8588 Galavanised MS hanger rod 6mm dia MS fully threaded up to
1000mm length each 26.00
8589 Calcium Silicate tegular edged celling tiles 595x595 mm and
15 mm thick on edges sqm 685.00
8590 Galvanised Steel main Tee ceiling section Size 24x38x0.33 mm
(3 metre long) each 120.00
8591 Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm
(3.00 metre long) each 65.00

419
No.
8592 Galvanised Steel intermediate cross T section Size 24 x 25 x

0.33mm (1.2 metre long) each 40.00
8593 Galvanised Steel intermediate cross T section Size 24 x 25 x
0.33mm (0.6 metre long) each 20.00
8594 Galvanised Steel soffit cleat size 25x35x1.60 mm each 4.00
8595 Wooden screws with plastic rawl plugs 35x8 mm each 1.00
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm long each 32.00
8597 GI Metal Tile Clip in Plain Beveled edge global white colour tiles of
size 600x600 mm and 0.5 mm thick sqm 677.00
8598 GI Metal Tile Clip in Perforated Beveled edge global white colour tiles
of size 600x600 mm and 0.5 mm thick sqm 782.00
8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 190.00
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 95.00
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) metre 115.00
8607 Spring T-connector each 5.00
8608 C Carrier Connector each 11.00
8609 C Suspension Clip each 8.00
8610 Wire Coupling Clip each 9.00
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 115.00
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long) each 80.00
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long) each 35.00
8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) each 17.00
8615 Hanger rod 4 mm thick each 8.00
8616 Adjustment clip 85x30x0.8 mm each 5.00
8617 Soffit cleat (Size 27x37x25x1.60 mm) each 4.00
8618 Dash fastener 6 mm dia 50 mm long each 8.00
8619 Galavanised MS L-shape level adjuster of size 85x25x2 mm each 15.00
8658 Precast C&D waste concrete block 1000 Nos 25150.00
8659 Water proof ply 12 mm thick sqm 517.00
8684 White sand stone gang saw cut 30 mm thick sqm 560.00
8761 Scaffolding net made of high density polyethylene UV stabilized having
density 100gm/ sqm. sqm 21.50
8956 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m
in the longitudinal and transverse direction sqm 100.00
8957 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20kN/m

420
No.
8960 Geosynthetic Drainage with two filtering nonwoven geotextiles

having a “W” configuration as longitudinal parallel channels. Mini-
mum thickness to be 7.2mm, with two filtering UV stabilized
polypropylene nonwoven geotextile of minimum thickness of
0.75mm having pores of 150 micron and tensile strength of 8.0
kN/m and having plane flow capacity of 2.1 L / (m.s) at hydraulic
gradient of 1.0 & 20 kPa pressure,tensile strength of 18 kN/m ,
with mass per unit area of 740 gsm. sqm 530.00
8961 Geosynthetic Drainage Composite having thermobonding a drain-
ing core - HDPE geonet comprises of two sets of parallel overlayed
ribs integrally connected to have a rhomboidal shape with a
polyethylene film and a nonwoven geotextile having mass per
unit area 130 g/m2 and tensile strength of 8.0 kN/m having in
plane flow capacity of 0.7 L / (m.s) at hydraulic gradient of 1.0 &
20 kPa pressure and tensile strength of 13.5 kN/m , with mass
per unit area of 830 gsm, sqm 630.00
8962 Synthetic Geogrid having Ultimate tensile strength- 100 kN/m sqm 220.00
8963 Synthetic Geogrid Ultimate tensile strength- 150 kN/m sqm 230.00
8966 Synthetic Geogrid Ultimate tensile strength- 300kN/m sqm 365.00
8977 Aluminium profile industrial troughed sheet of Alloy 31500/31000/
40800, conforming to IS 1254, IS 737, IS 2676, 0.71 mm thick,
the profile detail width 1044/920 mm, cover width 1000/875 mm. sqm 600.00
8978 Aluminium profile industrial troughed sheet of Alloy 31500/31000/
40800, conforming to IS 1254, IS 737, IS 2676, 0.91 mm thick,
the profile detail width 1044/920 mm, cover width 1000/875 mm. sqm 785.00

421
26.0 NEW TECHNOLOGIES AND MATERIALS
No.
26.1 Providing & fixing in position Phenol bonded Bamboowood flooring
with planks of sizes 14mm thick, 1800mm length (minimum) and
130 mm wide(minimum), in approved colour, texture and finish,
having Performance Appraisal Certificate (PAC) issued by Building
Materials & Technology Promotion Council (BMTPC). The flooring
shall be fixed with tongue and groove interlocking system, with
underlayment of 4mm thick expanded polyethylene foam sheets
having density 40kg/cum, over prepared surface with necessary
quarter round planks of size 1900mm x 18mm and door reducer of
size 1900mm x 44mm, wherever required. The bamboowood planks
shall have minimum density of 1000 Kg/cum & minimum Hardness
1000 Kgf. with Eco friendly UV coating, all complete as per direction
of the Engineer in-charge. sqm 5279.10
26.2 Providing & fixing in position Phenol bonded Bamboowood in wall
skirting with planks of sizes 14mm thick, 1900mm length (minimum)
and 85mm wide(minimum), in approved colour, texture and finish,
having Performance Appraisal Certificate (PAC) issued by Building
Materials & Technology Promotion Council (BMTPC). The skirting
shall be fixed with SS screws & rawl plugs, over underlayment of
4mm thick, expanded polyethylene foam sheets having 40kg/cum
density over prepared surface. The bamboowood planks shall have
minimum density of 1000Kg/cum & minimum Hardness 1000 Kgf.
with Eco friendly UV coating, all complete as per direction of the
Engineer in-charge. sqm 5162.75
26.3 Providing & fixing in position Phenol bonded Bamboowood wall
cladding at all height with planks of sizes 10mm thick, 1800mm
length (minimum) and 130 mm wide (minimum), in approved colour,
texture and finish, having Performance Appraisal Certificate (PAC)
issued by Building Materials & Technology Promotion Council
(BMTPC), with necesasary profiled edges fixed with 40mm SS screws
5 nos in each tile to frame work made of second class teak wood of
size 20x15 mm in centre of each tile and bottom and top of work
height, 40x15mm placed at ends of each tile. The cladding shall be
laid over backlayment of 1.00 mm thick expanded polyethylene foam
of density 40kg/cum in two layers, first layer on wall surface before
fixing wooden frame and second layer on frame under cladding. The
bamboowood planks shall have minimum density of 1000 Kg/cum
& minimum Hardness 1000 Kgf. with Eco friendly UV coating, all
complete as per direction of the Engineer in-charge. sqm 5559.40
26.4 Providing & fixing in position Phenol bonded Bamboowood panelled
or panelled and glazed shutters for doors windows, clerestorey
windows with pre-molded 30mm thick planks, in approved colours,
texture & finishe. It shall have 10mm wide, 25mm deep grove to fit in
panels.The bamboo wood shall have minimum density of 1000 Kg/
cum, minimum Hardness 1000 Kgf. All styles and rails shall have
profiled interlocking system locked in place by bamboo pins, all
complete as per direction of Engineer in charge. (The panelling will
be paid for separately). sqm 5460.25

422
No.
26.5 Providing & fixing in position Phenol bonded Bamboowood panelling

of 10mm thick, in 25 to 40 mm thick panelled or panelled & glazed
shutters for doors, windows, clerestorey windows, in approved colour,
texture & finish. The bamboowood planks shall have minimum
density of 1000 Kg/cum & minimum Hardness 1000 Kgf. The panels
shall have profiled interlocking system locked in place with bamboo
pins all complete as per direction of the Engineer in-charge. (area
of opening for panel inserts excluding portion inside grooves or rebates
to be measured) sqm 3561.70
26.6 Providing & fixing in position 65 mm thick factory made door frame of
Phenol bonded Bamboo wood (superior class, interior use), in
approved colour, texture and finish.The bamboo wood shall have
minimum density of 1000 Kg/cum, minimum hardness 1000 Kgf.
The door frame shall have tenon & mortise interlocking system, to
be fixed to the wall with 100 mm size G.I screws all a complete as
per direction of Engineer-in charge. cudm 254.00
26.6A Providing, erecting, laying and fixing in position in 3.5 to 4
mm thick bamboo mat corrugated sheet (BMCS) as per IS:
15476-2004 in roofing with self drilling screws along with EPDM
washers complete or with galvanized iron J or L hooks 8mm
dia G.I. plain and bitumen washers etc, all complete as per
direction of Engineer-in-Charge. sqm 5128.90
26.6B Providing and fixing in position ridges of 3.5 to 4 mm thick
bamboo mat ridge cap (BMRC) as per IS: 15476-2004 in roofing
with self drilling screws along with EPDM washers complete
or with galvanized iron J or L hooks 8mm dia G.I. plain and
bitumen washers etc, all complete as per direction of Engineer-
in-Charge. metre 4147.25
26.6C Providing and fixing at all height false ceiling of 4mm thick
phenol bonded Bamboo Mat board (595x595mm) conforming
to IS:13958-1994 including providing and fixing of frame work
made of GI angle 25x25x0.4 mm thick all around suitably fixed
to wall with the help of dash fastener and hanger frame
(600x600 c/c) made GI slotted Tee having powder coating on
bottom side (30x25x0.3 mm thick for main member & 25x25x0.3
mm for cross member) connected to ceiling with 2.64mm GI
wire and anchor fastener at every junction and also including
cost of making openings for light fittings, grills, diffusers, cut
outs made with frame of perimeter channels suitably fixed all
complete as per direction of Engineer-in-charge. sqm 3271.75
26.6D Providing and fixing at Bamboo Mat board conforming to IS:13958-
1994 for partition to frame by bucking or studding with screws
etc. complete (Frames, backing or studding to be paid separately)
26.6D.1 3mm thickness sqm 2396.20

423
No.
26.6E Providing and fixing at all height wall panelling with phenol
bonded Bamboo Mat board conforming to IS:13958-1994
including providing and fixing to frame work made of 50mm x
50mm hardwood plugs including cutting brick work and fixing
in cement mortar and making good the wall etc. and also
providing and fixing wooden moulded corner beading of
triangular shape to the junction of panelling etc. with iron
screws all complete as per direction of Engineer-in-Charge.
26.6E.1 9mm thickness sqm 4443.65
26.6E.2 12mm thickness sqm 5066.55
26.7 Providing and fixing 50 mm thick extruded polystyrene rigid insulation
board of required size between cavity wall, complying with ISO
4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity
of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346),
compressive strength of > 350 kPa listed as per ASTM D 1621,
density of 34-36 kg/m³ as per ASTM D 1622, water absorptions <
1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1
listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per
ASTM D 3576. Fire retardent property as per DIN 4102, Part 1 of
class B2 and as per ASTM E84 class A, fixed with suitable water
based adhesive and fastener, complete in all respect as per the
direction of Engineer- in-Charge. sqm 807.20
26.8 Providing and fixing 50 mm thick extruded polystyrene rigid insulation
board of required size underdeck on ceiling surface, complying with
ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal
conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per
IS 3346), compressive strength of > 350 kPa listed as per ASTM D
1621, density of 34-36 kg/cum as per ASTM D 1622, water
absorptions < 1% by volume as per ASTM D 2842, oxygen index of
24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia
(max) as per ASTM D 3576. Fire retardent property as per DIN 4102,
Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable
water based adhesive and fastener, complete in all respect as per
the direction of Engineer-in-Charge. sqm 871.20
26.9 Providing and fixing factory made solid Foam uPVC profile for kitchen
cabinet frame (45 x 20 mm) of approved shade, quality and make.
The profile shall be laminated on both sides, made from rigid foam
sheets (Single extruded) having density 600 Kg/cum and the exposed
edges sealed with PVC edge beading of same shade and colour.
The frame shall be fire retardent with necessary screw holding
capacity. Frame shall be fixed to wall using Expendable Fastner
with necesary stainless steel screws, all complete as per direction
of Engineer-in-charge. metre 377.00
26.10 Providing and fixing factory made Kitchen Cabinet Shutter/Partition
20 mm nominal thickness of approved shade, quality and make,
made from rigid foam sheets (Single extruded) having density 600
Kg/cum and laminated on both side by laminate Sheet/PVC foil
lamination. The exposed edges shall be sealed with PVC edge
beading of same shade and colour. The shutter shall be fire retardent
424
No.
having necessary screw holding capacity. Shutter shall be fixed to

frame using approved hinges with necessary stainless steel screws,
all complete as per direction of Engineer-in-charge. sqm 4535.30
26.11 Providing and fixing concealed hinge of approved quality for 19-20mm
thick door with stainless steel screws complete : each 105.25
26.12 Supplying & laying of bi-axial extruded high modulus polypropylene
geogrid coforming to MORTH SPECIFICATION for base/sub-base
reinforcement having minimum tensile strength 15kN/m in the
longitudinal and transverse direction, with 5kN/m and 7kN/m tensile
strength at 2% and 5% strain respectively in the longitudinal and
transverse direction, junction efficiency not less than 95% and with
38mm X 38mm mesh opening. sqm 171.35
longitudinal and transverse direction, with 10.5kN/m and 21kN/m
tensile strength at 2% and 5% strain respectively in the longitudinal
and transverse direction, junction efficiency not less than 95% and
with 38mm X 38mm mesh opening. sqm 296.45
26.16 Supplying & laying of drainage composite for use behind walls,
between two different fills, alongside drains of road, below concrete
lining of canals etc. Geocomposite for planar drainage, realized by
thermobonding a draining core in extruded monofilaments with two
filtering nonwoven geotextiles that may also be working as separation
or protecting layers. The draining three dimensional core will have a
“W” configuration as longitudinal parallel channels. Minimum
thickness to be 7.2mm, with two filtering UV stabilized polypropylene
nonwoven geotextile of minimum thickness of 0.75mm characteristic
opening size (090) of 110 micron and tensile strength of 8.0 KN/m
that will be working as separation or protecting layer, geocomposite
having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of
1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass
per unit area of 740 gsm, supplied in the form of roll for easy
transportation to site of work as per detailed specification all complete
as per directions of Engineer in charge. sqm 804.20
425
No.
26.17 Supplying & laying of drainage composite for use behind walls,
between two different fills, alongside drains of road, below concrete
lining of canals etc. having thermobonding a draining core - HDPE
geonet comprises of two sets of parallel overlayed ribs integrally
connected to have a rhomboidal shape with a polyethylene film and
a nonwoven geotextile having mass per unit area 130 gsm and
tensile strength of 8.0 kN/m that will be working as separation or
protecting layer, geocomposite having in plane flow capacity of 0.7 L
/ (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile
strength of 13.5 kN/m , with mass per unit area of 830 gsm, at
easily accessible location including top and bottom, with all leads
and lifts, manpower and machinery, materials, labour etc. complete
and as directed by Engineer - In - Charge. sqm 951.35
26.18 Supplying and laying high strength flexible geogrids (HSFG) as soil
reinforcement / basal reinforcement as per MORTH 3100 and IRC
113, made of high tenacity polyester core with polyethylene coating
with Minimum Long Term Design Strength (LTDS) of more than 50%
of ultimate tensile strength at 30 degree Celcius corresponding to 12
% strain .
26.18.1 Ultimate tensile strength- 100 kN/m sqm 347.95
26.19 Providing at all heights, levels and locations Aluminium profile
industrial troughed sheet of Alloy 31500/31000/40800, conforming to
IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/
self tapping SS screws of size 5.5x65 mm with EPDM seal complete
upto required pitch in horizontal, vertical or curved surfaces i/c cutting
to size and shape where required as per specifications, detail
drawings and direction of Engineer-in-Charge. The rate shall be
inclusive of all screws, seal, ridge, labour, scaffolding, machinery for
fixing and approved sealent where required etc. but excluding the
cost of purlins, rafters and trusses.

426
No.
26.19.1 0.71 mm thick, the profile detail width 1044/920 mm,

cover width 1000/875 mm. sqm 976.05
26.19.2 0.91 mm thick, the profile detail width 1044/920 mm,
cover width 1000/875 mm. sqm 1239.55
26.22 Providing and fixing false ceiling at all heights with integral densified
calcium silicate reinforced with fibre and natural filler false ceiling
tiles of Size 595x595mm of approved texture, design and patterns
having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per
IS 8225:1987, Light reflectance of 85% (minimum). Non combustible
as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),
humidity resistance of 100%, thermal conductivity < 0.043 W/m K
as per ASTM 518:1991,in true horizontal level suspended on inter-
locking metal T-Grid of hot dipped galvanised iron section of 0.33mm
thick (galvanized @ 120 grams per sqm including both sides)
comprising of main-T runners of size 24x38 mm of length 3000 mm,
cross - T of size 24x32 mm of length 1200 mm and secondary
intermediate cross-T of size 24x32 mm of length 600mm to form
grid module of size 600 x 600 mm, suspended from ceiling using
galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e.
50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia
fully threaded hanger rod upto 1000 mm length and L-shape level
adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall
angle of size 24x24x0.40 mm of length 3000 mm to be fixed on
periphery wall / partition with the help of plastic rawl plugs at 450
mm center to center and 40 mm long dry wall S.S screws. The work
shall be carried out as per specifications, drawing and as per directions
of the Engineer-in-Charge.
26.22.1 With 15 mm thick tegular edged light weight calcium
silicate false ceiling tiles. sqm 1688.80
26.23 Providing and fixing false ceiling at all heights with integral densified
calcium silicate reinforced with fibre and natural filler false ceiling
tiles of Size 595x595 mm of approved texture, design and patterns
having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per
IS 8225:1987, Light reflectance of 85% (minimum). Non combustible
humidity resistance of 100%, thermal conductivity < 0.043 W/m K
as per ASTM 518:1991, in true horizontal level suspended on inter-
locking metal powder coated T-Grid of hot dipped galvanised iron
section of 0.40 mm thick on Silhouette profile,rotary stiched double
webbed white with 6mm reveal profile (white/black),comprising of
main-T runners of size 15x42mm of length 3000 mm, cross - T of
size 15x42 mm of length 1200 mm and secondary intermediate cross-
T of size 15x42 mm of length 600mm to form grid module of size
600 x 600 mm, suspended from ceiling using galvanised mild steel
items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm
outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger

427
No.
rod upto 1000 mm length and L-shape level adjuster of size 85x25x2
mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of
length 3000 mm to be fixed on periphery wall / partition with the help
of plastic rawl plugs at 450 mm center to center and 40mm long dry
wall S.S screws. The work shall be carried out as per specifications,
drawing and as per directions of the Engineer-in-Charge.
26.23.1 With 15 mm thick integral densified micro edge light
weight calcium silicate false ceiling tiles sqm 1952.70
26.24 Providing and fixing in position wall panelling at all heights with integral
densified calcium silicate panels/tiles of size 595 x 595mm, having
NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS
8225:1987, Light reflectance of 85% (minimum). Non combustible
humidity resistance of 100%, thermal conductivity <0.043 W/m K
as per ASTM 518:1991, comprising of a frame made from especially
fabricated galvanised mild steel sheet 0.50 mm thick pressed section
(galvanizing @120 grams per sqm including both sides) i.e.vertical
studs of size 48 x 34 x 36 mm are placed at 600mm center to center
in a floor and ceiling channel section of size 50 x 32m fixed to the
floor and soffit at 600mm centers using 12mm dia,50mm long wedge
type expanded zinc alloy dash fastner with 10mm bolt. This same
channel is then to be fixed in horiziontal direction at 600mm center
to center so as to form a grid of 600mm x 600mm. Glasswool of
50mm thickness is then to be inserted in the slots and finally calcium
silicate non combustible panels/tiles are to be screw fixed with self
tapping pan head nickel coated mild steel screws of size 13 x 3.2mm
on to this grid leaving an even groove of 1 mm between the panels.
The joints between the panels are to be duly jointed and finished
using recommended jointing calcium silicate based compound and
fiber joint tape roll 50mm wide (90 metre )roll and two coats of
primer suitable for panelling as per manufacturer’s specification as
per direction of Engineer-in-Charge all complete.
26.24.1 With 15 mm thick fully perforated square/butt edge light
weight calcium silicate panels/ tiles sqm 2736.80
26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights
with integral densified calcium silicate reinforced with fibre and natural
filler false ceiling tiles of Size 595x595 mm of approved texture, design
and patterns having NRC (Noise Reduction coefficient) of 0.50
(minimum) as per IS 8225:1987, Light reflectance of 85% (minimum).
Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity
< 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the
existing frame work consisting of T-sections and Lsections suitably
fixed according to tile size as per direction of Engineer-in-charge. sqm 1379.10
26.26 Providing & fixing false ceiling at all heights with GRG (Glass Fibre
Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of
approved texture, design and patterns having moisture content less
than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS
8225:1987, Non combustible as per BS 476 (part 4)-1970 and light

428
No.
reflectance of 85% (minimum) to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised
iron section of 0.33mm thick (galvanized @ 120 grams per sqm
including both sides) comprising of main-T runners of size 15x32
mm of length 3000 mm, cross - T of size 15x32 mm of length 1200
mm and secondary intermediate cross-T of size 15x32 mm of
length 600mm to form grid module of size 600 x 600 mm, suspended
from ceiling using galvanised mild steel items (galvanizing @ 80
grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash
fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length
and L-shape level adjuster of size 85x25x2 mm. Galvanised iron
perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to
be fixed on periphery wall / partition with the help of plastic rawl
plugs at 450 mm center to center and 40 mm long dry wall wood
screws. The work shall be carried out as per specifications, drawing
and as per directions of the Engineer-in-Charge.
26.26.1 With semi perforated 12 mm thick micro tegular edged
GRG false ceiling tiles. sqm 1572.85
26.26.2 With fully perforated 12 mm thick micro tegular edged
or 10 mm thick square edged GRG false ceiling tiles. sqm 1699.30
26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of
size 595X595mm of approved texture, design and pattern. The tiles
should have Humidity Resistance (RH) of 99%, Light Reflectance >
85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance
as per (BS 476 pt - 6 &7)in true horizontal level suspended on
interlocking T-Grid of hot dipped all round galvanized iron section of
0.33 mm thick (galvanized @120 gsm) comprising of main T runners
of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length
1200 mm and secondary intermediate cross T of size 15x32 mm of
length 600 mm to form grid module of size 600x600 mm suspended
from ceiling using galvanized mild steel item (galvanised@80gsm)
50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter
fully threaded hanger rod up to 1000 mm length and L-shape level
adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre
along main ‘T’. The system should rest on periphery walls /partitions
with the help of GI perimeter wall angle of size24x24X3000 mm made
of 0.40 mm thick sheet, to be fixed to the wall with help of plastic
rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.
screws. The exposed bottom portion of all T-sections used in false
ceiling support system shall be pre-painted with polyester baked
paint, for all heights. The work shall be carried out as per
specifications, drawings and as per directions of the engineer-in-
charge.
26.27.1 With 16 mm thick beveled tegular mineral fibre false
ceiling tile (NRC 0.55 to 0.6 sqm 2000.85
26.27.2 With 20 mm thick beveled tegular mineral fibre false
ceiling tile (NRC 0.7) sqm 2296.85
26.27.3 With 16 mm thick beveled tegular mineral fibre Anti-
microbial false ceiling tile confirming to ISO 5 (class
100 ) specifications sqm 2128.25
429
No.
REPAIR AND REHABILITATION ITEMS

26.28 Chipping of unsound/weak concrete material from slabs, beams,
columns etc. with manual Chisel and/ or by standard power driven
percussion type or of approved make including tapering of all edges,
making square shoulders of cavities including cleaning the exposed
concrete surface and reinforcement with wire brushes etc. and
disposal of debris for all lead and lifts all complete as per direction of
Engineer-In-Charge
26.28.1 75mm average thickness sqm 287.10
26.28.2 50mm average thickness sqm 194.60
26.28.3 25 mm average thickness sqm 96.50
26.29 Cleaning of reinforcement from rust from the reinforcing bars to give
it a total rust free steel surface by using alkaline chemical rust
remover of approved make with paint brush and removing loose
particles after 24 hours of its application with wire brush and thoroughly
washing with water and allowing it to dry, all complete as per direction
of Engineer-In-Charge.
26.29.1 Bars upto 12 mm diameter metre 5.90
26.29.2 Bars above 12 mm diameter metre 11.80
26.30 Drilling suitable holes in reinforced or plain cement concrete with
power driven drill machine to a minimum depth of 100mm upto 200mm
in RCC beams, lintels, columns and slabs to introduce steel bars for
sunshades/balconies including fixing the steel bars in position using
epoxy resin anchor grout of approved make but excluding the cost of
reinforcement, all complete as per direction of Engineer-In-Charge.
26.30.1 Upto and including 12mm dia. each 113.05
26.31 Providing, mixing and applying bonding coat of approved adhesive
on chipped portion of RCC as per specifications and direction of
Engineer-In-charge complete in all respect.
26.31.1 SBR Polymer (@10% of cement weight) modified
cementitious bond coat @ 2.2 kg cement per sqm of
surface area mixed with specified proportion of approved
polymer sqm 117.30
26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg
of approved make sqm 388.50
26.32 Providing, mixing and applying SBR polymer (of approved make)
modified Cement mortar in proportion of 1:4 (1 cement: 4 graded
coarse sand with polymer minimum 2% by wt. of cement used) as
per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness
shall be done just after the surface preparation is completed and Payment
under this item shall be made only after proper wet curing has been
done and surface has been satisfactorily evaluated by sounding / tapping
with a blunt metal instrument and/or the 75mm size cube crushing
strength at the end of 28 days to be not less than 30 N/Sqmm2).
26.32.1 12 mm average thickness. sqm 304.10

430
No.
26.32.2 25 mm average thickness in 2 layers. sqm 471.00

26.32.3 50 mm average thickness in 3 layers. sqm 942.00
26.33 Providing, mixing and applying SBR polymer (of approved make @
minimum 2% by wt. of cement used) modified plain/reinforced cement
concrete for structural members having minimum characteristic
compressive strength [with ordinary portland cement, coarse sand
and graded stone aggregate of 10mm maximum size in proportion
as per design criteria] with specified average thickness.
Note: Rates shall be for finished surface area of concrete and shall
include the cost of labour, concrete and appropriate approved Super-
Plasticiser for rendering concrete as flowable and SBR polymer but
shall exclude cost of reinforcement, bond coat, Shear Keys, centering
and shuttering, strutting, propping etc (Payment under this item shall
be made only after proper wet curing has been done and surface has
been satisfactorily evaluated by sounding/tapping with a blunt metal
instrument)
26.33.1 50mm thick in Grade M 25 with cement content not less
than 330 kg per cum sqm 539.90
26.34 Providing and laying SBR Polymer modified (of approved make @
minimum 2% by wt. of cement used) plain/reinforced concrete jacket
for the structural members e.g. columns, pillars, piers, beams etc
with concrete having the specified minimum characteristic
compressive strength [with ordinary portland cement, coarse sand
and graded stone aggregate of 10mm maximum size in proportion
as per design criteria] with specified average thickness all-round
existing core of RCC member.
Note: Rates shall be for finished surface area of concrete and shall
include the cost of making holes in existing RCC slab, if required, for
pouring concrete in shuttering mould of jacket and appropriate
approved Super-Plasticiser for rendering concrete as flowable self
compacting and SBR polymer but shall exclude cost of
reinforcement, bond coat, Shear Keys, centering and shuttering,
strutting, propping etc (Payment under this item shall be made only
after proper wet curing has been done and surface has been
satisfactorily evaluated by sounding/tapping with a blunt metal
instrument)

431
No.
26.35 Providing and injecting approved grout in proportion recommended

by the manufacturer into cracks/honey-comb area of concrete/
masonry by suitable gun/pump at required pressure including cutting
of nipples after curing etc. complete as per directions of Engineer-in-
Charge.
(The payment shall be made on the basis of actual weight of approved
grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2%
of weight of cement used) modified Cement slurry made
with non shrink compound in concrete/RCC work kg 97.30
26.35.2 Stirrer mixed SBR Polymer (of approved make) modified
Cement slurry made with Shrinkage Compensating
Cement in concrete/RCC work. kg 101.55
26.35.3 Epoxy injection grout in concrete/RCC work of approved
make kg 792.30
26.36 Providing, erecting, maintaining and removing temporary protective
screens made out of specified fabric with all necessary fixing
arrangement to ensure that it remains in position for the work duration
as required by the Engineer-in-charge.
26.36.1 Wooven PVC cloth sqm 45.50
26.37 Cleaning of exposed concrete surface of sticking material including
loose and foreign material by sand blasting with coarse sand followed
by and including cleaning with oil free air blast as per direction of
Engineer in charge. sqm 289.90
26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers with
approved design mix concrete having the specified minimum
characteristic compressive strength [with ordinary portland cement,
coarse sand and graded stone aggregate of 10 mm maximum size
in proportion as per design criteria] including the cost of centering
and shuttering at edges and corners etc. as directed by Engineer-
in-Charge
Note: Rates shall include the providing necessary ground wires etc.
The levelling gauges, if used, shall be paid for separately. Payment
under this item shall be made only after proper wet curing has been
done and surface has been satisfactorily evaluated by sounding/
tapping with a blunt metal instrument.
26.39 Providing and inserting 12mm dia galvanised steel injection nipple in
honey comb area and along crack line including drilling of holes of
required diametre (20mm to 30mm) up to depth from 30mm to 80mm

432
No.
at required spacing and making the hole & crack dust free by blowing
compressed air, sealing the distance between injection nipple with
adhesive chemical of approved make and allow it to cure complete
as per direction of Engineer-In-Charge. each 191.20
26.40 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm
mesh or other suitable size wire mesh to be fixed & firmly anchored
to the concrete surface by means of “L” shaped mild steel shear key
welded with existing reinforcement including the cost of materials,
labour, tool & plants as approved by Engineer-in-charge. sqm 801.70
NEW TECHNOLOGY ITEMS
26.41 Designing, providing, installing and fixing factory finished custom
designed cold form Light Gauge Steel Framed super structure
comprising of steel wall panel, trusses, purlins etc manufactured out
of minimum 0.75 mm thick steel sheet as per design requirements.
The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc
Alloy coated steel having minimum yield strength 300-550 Mpa)
conforming to AISI specifications and IBC 2009 for cold formed steel
framing and construction and also as per IS: 875-1987, ISO 800-
1984 and IS:801- 1975. The wind load shall be as per provisions of IS
875 (part -III). LGSFS frame shall be designed as per IS: 801 using
commercially available software such as Frame CAD Pro-11.7/
STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or
equivalent. Proper usage of Connection Accessories like Heavy Duty
Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss
with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections,
L-Shaped Angles for better structural stability. The framing section
shall be cold form C-type having minimum web depth 89 mm x 39mm
flange x 11mm lip in required length as per structural design
requirement duly punched with dimple/slot at required locations as
per approved drawings. The slots will be along centre line of webs
and shall be spaced minimum 250mm away from both ends of the
member. The frame can be supplied in panelized or knock down
condition in specific dimensions and fastened with screws extending
through the steel beyond by minimum of three exposed threads. All
self drilling tapping screws for joining the members shall have a Type
II coating in accordance with ASTM B633(13) or equivalent corrosion
protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames
shall be fixed to RCC slab or Tie beam over Neoprene rubber using
self expanding carbon steel anchor bolt of dia as per approved
drawings. design subject to minimum 12mm diameter and 121mm
length conforming to AISI 304 and 316 at 500mm c/c with minimum
embedment of 100mm in RCC (RCC to be paid separately) and located
not more than 300mm from corners or termination of bottom tracks
complete in all respects. The item also includes the submission of
stability reports duly examined and issued by any NIT/IIT. The rate
includes the concept design, detailed design, fabrication of sections,
transportation, installation and all required fixing arrangement at
site as described above. kg 217.50

433
No.
26.42 Providing and fixing of external wall system on Light gauge steel
frame work with . Outer face having 6mm thick heavy duty fiber cement
board fixed on 9mm thick heavy duty fiber cement board confirming
to IS 14862:2000, category IV type A (High pressure steam cured)
as per standard sizes fixed with self-drilling / taping screws / fasteners
@ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be
maintained and groves shall be sealed with silicon based sealant.
The board shall be fixed in a staggered pattern.Screws shall be of
counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of
length varying from 25 to 45 mm and internal face 12.5mm thick
gypsum plaster board fixed on 8mm thick fiber cement board
confirming to IS 14862:2000 of category III type B (High pressure
steam cured) as per standard sizes fixed with self-drilling / taping
screws / fasteners @ 60cm c/c of approved make, proper taping and
jointing to be done using fiber mesh tape and epoxy and acrylic
based jointing compound for seamless finish.(cost of frame work to
be paid for separately). sqm 3418.95
26.43 Providing and fixing internal wall panels on Light gauge steel frame
work with 12.5mm thick gypsum plaster board conforming IS
2095:2011 fixed on 8mm thick fiber cement board conforming to IS
14862:2000 of category III type B (High pressure steam cured) as
per standard sizes fixed with self-drilling / taping screws / fasteners
@ 60cm c/c of approved make, Screws shall be of counter sunk rib
head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying
from 25 to 45 mm. Proper taping and jointing to be done using
fiber mesh tape and epoxy and acrylic based jointing compound for
seamless finish.(cost of frame work to be paid for separately) sqm 2118.95
26.44 Providing and fixing in all exterior face panels breathable vapour barrier
underneath the cement fiber board as per National Building Code
2009 complete as per direction of Engineer-in-charge. sqm 293.95
26.45 Supplying and installation of moisture resistant/fire resistant 6 mm
thick Heavy duty fiber cement board (High pressure steam cured)
conforming to IS 14862:2000 of category III type B as per standard
sizes fixed with self-drilling / taping screws. Screws shall be of counter
sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length
varying from 25 to 45 mm. sqm 1179.30
26.46 Providing and fixing in position, 200 mm thick factory made Expanded
Polystyrene Core (EPS Core) wall panels consisting of EPS core
sandwiched between two Engineered sheets of welded wire fabric
mesh duly finished with shortcrete materials on outer faces. The
fabric mesh shall be made of 3 mm dia G.I. wire mesh with 50 mm
pitch in both the directions and on both faces of the wall, kept at
120-135 mm gap and connected by the zig zag G.I. wire of 3 mm dia
at alternate row by welding (at an angle ranging from 50-70 degree) .
The EPS core shall consist of 100 mm thick EPS of density not less
than 20 kg/ per cum. Both the outer faces of the panel shall be
finished by applying the layer of 50 mm thick cement mortar 1:3 {1
cement: 3 coarse sand (not having more than 40% stone chips of
size upto 6 mm)} À with the help of shotcreting/guniting equipment

434
No.
etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces
finished with trowel. Fixing operations of wall panels shall be completed
in all respect as per drawings and specifications and under the overall
direction of the Engineer-in-charge. sqm 3854.60
26.47 Providing and fixing in position, 230mm thick factory made Expanded
Polystyrene Core (EPS Core) roof/floor panels made of 3 mm dia
G.I. wire mesh with 50 mm pitch in both the directions and on both
faces of panel, kept at 120-135 mm gap and connected by the zig
zag G.I. wire of 3 mm dia at alternate row by welding (at an angle
ranging from 50-70 degree). The EPS core shall consist of 100 mm
thick EPS of density not less than 20kg/ per cum. The bottom side
of the panel shall be finished by applying a layer of 60-65 mm thick
cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than
40% stone chips of size upto 6 mm)} À with the help of shotcreting
equipment etc at a pressure of not less than 1 bar (100Kn/m2) and
surface finished with trowel. The top face of the panel shall be provided
and finished by applying 70-75 mm thick layer of cement concrete
1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20
mm nominal size). Fixing operations of roof/floor panels
shall be completed in all respect as per drawings and specifications
and under the overall direction of the Engineer-in-charge. sqm 4144.95
26.48 Providing and fixing of customized aluminium formwork for monolithic
construction RCC members with a repetitive usage of 100 times
using grade 5052 aluminium of panel sheets of minimum 4 mm thick
and grade 6061 (Type-6) aluminium for extruded sections. The form
work includes of beam components i.e. beam side panel, prop head
for soffit beam, beams soffit panel, beam soffit bulk head and deck
components i.e. deck panel, deck prop, prop length, deck mid, soffit
length, deck beam bar and wall components i.e. wall panel, rocker,
kiker and internal soffit corner, external soffit corner, external corner,
internal corner etc. The panels are held in position by a simple pin
and wedge system that passes through holes in the out side rib of
each panel. The tolerance of finished panels to be (-1 mm), and shall
conform to IS 14687-1999. Pins and wedges to be
made of high grade mild steel, all complete as per direction of
Engineer-in- charge. (Cost of RCC work shall be paid separately)
26.49 Providing and fixing in position factory made EPS cement
sandwich wall/roof/floor light weight solid core panels made
of core material of EPS granule balls/beads (conforming to IS
4671:1984 and shall have density not less than 15kg per cum)
adhesive, cement, sand, flyash and other bonding material in
mortar state processed to form in a preset mould. The outer
face on both sides of the panels will be non asbestos fiber
cement board confirming to IS 14862:2000 or Calcium silicate
board confirming to EN 14306:2009 of 5mm thick each. Panel
shall be laid on 6mm thick cement mortar (1 cement: 2 fine
sand) mixed with chemical adhesive of 0.5kg per 50kg of
cement or shall be preferably fixed into ‘C’ channel made of
1.2mm thick MS plate screwed/fastenened to the slab/column/
beam etc. The panel shall fixed vertically with tongue and
groove joint and horizontally locked with steel bar between
each other and floors and filled with cement mortar and
adhesive. Panels should be used as floor & roofing with
additional structural support, steel or RCC depending upon
the design. All the operation shall be completed in all respect
as per drawings, Manufacturers specifications and under the
overall direction of Engineer-in-Charge (Cost of all the material
is included except “C channel” which will be paid seperately).
435
No.
26.49.1 Non load bearing panels 50mm thick of required size sqm 1166.85
26.50 Providing and fixing in position factory made non asbestos
fibre reinforced aerated cement sandwich wall/roof/floor light
weight solid core panels made of light weight cement concrete
core composed of OPC cement, pulverized flyash, quick lime,
cotton pulp & Gypsum in mortar state mixed with aeration
agent in a preset mould. The outer face on both sides of the
panels will be non asbestos fibre cement board confirming to
IS 14862:2000. These solid wall panels are installed using
Galvanized iron steel tracks/C channel of 1mm thick of required
sizes as recommended by manufacturer’s and fixed to floor
and RCC soffit in plumb to each other with steel screw/
fasteners. The panel shall be fixed vertically with tongue &
groove joint with cement based polymer modified jointing
compound. The exposed surface finished with fibre mesh/glass
fibre tape with polymer based jointing compound having
superior flexibility. Panels should be used as floor & roofing
with additional structural support, steel or RCC depending upon
the design. All the operation shall be completed in all respect
as per drawings, Manufacturers specifications and under the
overall direction of Engineer-in-Charge (Cost of all the material
is included except “tracks/C channel” which will be paid
separately).
26.50.1 Non load bearing panels 50mm thick of required size
(minimum 4mm thick fibre cement board) sqm 1317.95
26.50.2 Non load bearing panels 75mm thick of required size
(minimum 5mm thick fibre cement board) sqm 1535.70
26.51 Supplying of standard quality GFRG panel of 124 mm thickness
with modular cavities purchased from GFRG panel
manufacturing plant in the country, cut to required wall sizes
and floor/ roof slab sizes in correct length and height, including
cutting of door, window and ventilator opening as per the
cutting drawing prepared by architects /design engineers for
the construction of GFRG building and loaded in stillages for
transportation to the construction site. Cost of panel includes
security deposits, hire charges of stillages & jaws, cost of
transportation in trucks/ lorries without any damages upto
300kms including all leads and lifts from GFRG manufacturing
plant to construction site and unloading at site using suitable
fork lift/ crane. (Payment shall be made on the basis of area of
one side of panel without reduction of opening of door/
window / ventilator).
For transportation above 300kms, additional charges to be paid. sqm 1305.60

436
No.
26.52 Erection of GFRG Panels in walls in all floors using suitable

crane as per instructions of Engineer-in-Charge, as per cutting
drawings and structural drawings, in perfect line and plumb,
above RCC plinth beam/GFRG panel below and provide
necessary lateral/ slanting support to keep the wall panel in
safe position, providing & tieing of Reinforcement as per
structural drawings and applying a coat of water repellant
coating Zycosil/equivalent or equivalent product (1 Zycosil/
equivalent compound :10 water ) to saturation level over RCC
plinth beam to provide water proofing treatment to joint
between wall panel & plinth beam as per the guide lines /
instruction by the engineer in charge. (Cost of reinforcement,
water proofing of walls and plinth beam/GFRG panel below
joints and installation of door/ window frames before filling of
concrete shall be paid separately). The rate quoted shall
include making provision for laying of lintels, beams,
sunshades, staircase beams, lofts, plumbing work, electrical
conduits and any structural insertion etc., as per the drawing
and direction of the engineer in charge. The payment shall be
made based on the actual exposed area (one side only) of the
panel.The work shall be carried out as per the Special
Conditions For Glass Fibre Reinforced Gypsum (GFRG)
Structures mentioned in NIT.Note: i) When cutting panel, “A”
side is to be for outside or external surface of respective
external wall and B side is to be for internal surface of wall
ii)Erection of panel is to be with reference to both building
plan & cutting drawing by following notational mark indicated
in the cutting drawing as well as notional mark written on
each panel cut as per cutting drawing sqm 266.55
26.53 Filling of empty cavities (as shown in the structural design
drawing) with quarry dust mixed with 5% cement (by volume).
After initial infill of 50 mm thick with M25 concrete at base/
bottom of cavities to seal off, infill wall panel cavities in 3 stages
as detailed below, (i) 1st pour / infill to be limited to 0.3 to 0.50
m height from bottom of the panel.(ii) 2nd Pour/ infill: infilling
shall be done only after 90 minutes interval between successive
pours. The maximum height of infill shall be restricted to 1.5m
height or up to the top level of door / window.(iii) 3rd pour/infill:
After an interval of 90 minutes of second pour, infill or pour the
balance height up to the bottom of embedded RCC tie beam.
Pour enough water just required to dampen the dry mix enough
to form cake form after each stage.(cost of laying M25 concrete
shall be paid separately)(If any rain falls in between any stages
of concrete pour, make sure to cover the panel top to prevent
ingress of water or water falling into the cavities. In case of
water collection over the concrete inside the panel, drill 10mm
hole in GFRG panel immediately above concrete filled level to
drain out water before pour/in-fill of balance concreting) cum 2346.15
26.54 Laying of GFRG panel as roof / floor slab panel and staircase
panel using suitable crane as per instructions of Engineer-in-

437
No.
Charge, including providing support system with 25mm x

300mm-400 mm wide plywood, as runner with proper prop
below proposed micro beams including
(a) Cutting of top flange of panel to 180 mm wide (leaving 25mm
projection on either side) to provide RCC embedded micro
beam as per cutting drawings and structural drawings.
(b) Reinforcement for micro beams and tie beams to be provided
in position with proper anchorage as per structural drawings.
(c) Provision for Electrical cabling, fan hooks and laying of
pipes for plumbing work.
(d) Concreting of Tie beam, micro beam and top of GFRG
panels (50 mm thick) with M-25 cement concrete mix
using coarse aggregate of size less than 20 mm including
laying of 10 gauge 100x100 size weld mesh with 25 mm
effective cover from the panel top. sqm 285.15
26.55 Supplying and fixing 10 Gauge weld mesh of size 100mm x100
mm for floor/roof slab concrete screed over the micro beams as
reinforcement. The weld mesh shall be fixed as per drawing. sqm 233.70
26.56 Application of ZMB 60/equivalent solution (100 Kg ZMB 60/
equivalent, 1 litre ZMB Nano Thinner, 20 litre water & 1 Litre
Zycoprime/equivalent = 122 litre/kg) over already applied coat
of Zycosil/equivalent & Zycoprime/equivalent solution on the
top of all the RCC plinth beams by brush/spray coat before
erection of GFRG over RCC plinth beams in GF. In the case of
upper floors 150 mm wide on floor slab for all the external
walls, bath/toilet/wet areas (3 hrs drying time) before erection
of wall panel on upper floors including erection of parapet wall. sqm 286.00
26.57 After erection of GFRG wall panels, seal all GFRG wall joints
with paper tape temporarily. Water proofing treatment of
vertical joints with Zycosil/equivalent water proofing Solution
(1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2
litres of Zycoprime/equivalent added and stirred (total 23 litres))
with 50 ml syringe till the gap and in filled concrete is
completely saturated. After removing the paper seal, seal
off the vertical joints with water proofing material “Grout RW/
equivalent “ (Sealing cost excluded.) metre 81.25
26.58 Filling of joints between RCC plinth beam / floor slab and wall
panel of external walls, toilet / bath room / wet areas walls on
all floor and parapet wall over roof slab, stair case head room
at the time of erection of GFRG panels with Grout RW/
equivalent sealant compound after the erection of panel before
the infill of concrete in panel cavities and fine finish. This
applies for all horizontal and vertical joints between GFRG
wall and slab panels. metre 39.60
26.59 Water proofing treatment of Vertical joints (of external side
and internal side) between door frame, window & ventilator
frames (on all four sides) of outer wall over the Zycosil/
equivalent & Zycoprime/equivalent solution already applied
(before the installation of door / window / ventilator frames in
position) and fine finish with Grout RW/equivalent. metre 40.40

438
No.
26.60 Water proofing treatment of RCC sunshade with Zycosil/

equivalent water proofing Solution (1 litre of Zycosil/equivalent
& 20 litres of water stirred first & 2 litres of Zycoprime/equivalent
added and stirred (total 23 litres)) till it meets the saturation
level and testing as per RILEM or by water drops test in which
water drops do not absorb but drops remain or rolls. sqm 131.50
26.61 In-filling / sealing of joint between RCC lintel cum sunshade
and wall (on external side) in all floors by pushing in Grout
RW/equivalent in paste form and coving 20 mm x 20 mm after
applying a coat of Zycosil/equivalent & zycoprime/equivalent
solution before cement plastering of top, bottom and sides of
RCC sunshade. metre 40.40
26.62 Designing, Providing, installing and fixing factory finished
customed design pregalvanized high tensile steel joists
manufactured from G350 Z275 confirming to IS:277-1992,
minimum coating of galvanizing 275 gm/sqm, minimum yield
stress 35 MPa & minimum tensile strength of 380 MPa
placed 1.23 metre apart to support the load of slab etc as per the
design & directions of Engineer-in-Charge. kg 139.65
26.63 Providing and fixing special adjustable lockbars of mild steel
E-250 to support the temporary plywood for work between joists
during construction as per design & directions of the Engineer-
in-charge. kg 20.55
26.64 Centering and shuttering with 12mm thick shuttering plywood
confirming to IS 4990:2011 and removal of form at all heights.
Plywood will be supported on lock bars.
26.64.1 Suspended floors, roofs, landings, balconies and
access platform. sqm 87.95
26.65 Providing and fixing roofing consist of 0.8 mm thick galvanized
steel deck sheet confirming to IS 277:1992 used as permanent
shuttering over which MS wire mesh 3mm laid at 100x100 mm
grid including edge trim covered with concrete. This metal
deck will be supported on structural steel beam with shear
studs. (Structural steel like Beam, column, joists etc. & concrete
of different grade as per design will be paid separately). sqm 1451.70
26.66 Providing and fixing in position, 130 mm thick factory made
Expanded Polystyrene Core (EPS Core) wall panels consisting
of EPS core sandwiched between two Engineered sheets of
welded wire fabric mesh duly finished with shortcrete materials
on outer faces. The fabric mesh shall be made of 3 mm dia
zinc coated G.I. wire mesh with 50 mm pitch in both the
directions and on both faces of the wall and connected by GI
wire of 3mm dia at alternate row by welding. The EPS core
shall consist of 60 mm thick EPS of density not less than 16 kg/
per cum. Both the outer faces of the panel shall be finished by
applying the layer of 35 mm thick cement mortar 1:3 {1 cement:
3 coarse sand (not having more than 40% stone chips of size
upto 6 mm)} with the help of shotcreting/guniting equipment

439
No.
etc at a pressure not less than 1 bar (100KN/m2) and both

surfaces finished with trowel. Fixing operations of wall
panels shall be completed in all respect as per drawings and
specifications and under the overall direction of the Engineer-
26.67 Providing and fixing of external thermal insulation and
composite system with First layer of self-extinguishing type
Expanded Polystyrene (EPS) insulation boards of 120 mm thick
( max 1mX0.5m section), confirming to IS 4671:1984, having
thermal conductivity of 0.034 W/mK, (measured as per IS 3346-
1980), density of 20-24 kg/m³ measured as per IS 5688-1982,
Fire retardant property self-extinguishing type as per EN 13501-
1, bonded with special polymer modified cementitious
adhesive confirming to EOTA ETAG 004 (European Technical
Approval) formulated to bond polystyrene insulation boards
to typical mineral substrate (according to ETAG 004) and
Polypropylene mechanical fasteners with plastic pin
confirming to EOTA ETAG 014 (European Technical Approval)
having dia 10mm & L=200mm on finished level wall and the
junction between two adjacent EPS boards to be sealed with
low expansion moisture cure Polyurethane Foam. Second
layer consists of Fiberglass mesh covered with alkali-resistant
coating, mass per unit area > “145 gm/m2, mesh size: 3.9x4.0
mm ±10% embedded in special polymer modified cementitious
Base Coat with hydrophobes and the corners will be protected
with Corner-beads with alkali-resistant mesh wings at least 10
cm wide, mesh mass per unit area min 145 gm/m2. The surface
will be levelled, finished, made smooth complete in all respect
as per manufactures specification and as per directions of
Engineer-in-Charge. sqm 3366.60
26.68 Providing and laying factory made Precast concrete solid blocks
of 200 mm thickness of grade M10 made of C&D waste from
approved manufacturer in foundation and plinth in:
26.69 Providing and laying factory made Precast concrete solid blocks
of 200 mm thickness of grade M10 made of C&D waste from
approved manufacturer in superstructure above plinth level
up to floor V level
26.70 Providing and laying half block masonry with factory made
Precast concrete solid blocks of 100 mm thickness of grade
M10 made of C&D waste from approved manufacturer in
foundation and plinth in:
26.70.1 Cement mortar 1:4(1 cement : 4 coarse sand) sqm 695.40
26.71 Providing and laying half block masonry with factory made
Precast concrete solid blocks of 100 mm thickness of grade
M10 made of C&D waste from approved manufacturer in
superstructure above plinth level up to floor V level:
26.71.1 Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 853.75

440
No.
26.72 Providing and laying 60mm thick factory made cement concrete
paver block of approved shape and colour of M -30 grade made
of C&D waste by block making machine with vibratory
compaction laid in required pattern and including over 50mm
thick compacted bed of coarse sand, filling the joints with fine
sand etc. all complete as per the direction of Engineer-in-
charge. sqm 748.60
PREFAB/PRECAST TECHNOLOGY
26.73 Fabrication & Manufacturing of Prestressed Hollow Core slab
(Hollow area 25 to 30%) of different thickness & modular width
1200 mm in Controlled Factory Environment with approved
methodology informing to IS 10297- 1982 conforming to IS : 10297-
1982 by using long line casting method having arrangement of
proper steel bed. Concreting should be done by batch mixing
plant capable of producing zero slump concrete, transported
through automatic shuttels of standard make & layed on bed
with the help of extruder/Slipformer, finishing, curing and also
provision of steam curing. Cutting, making necessary cutout/holes
of required sizes for services in slab element after achieving
required strength, yard handling & stacking all complete as per
approved shop drawings & design mix as per the direction of the
Engineer-in-charge. (Cost of strands should be paid separately).
Note : Excess/ less cement over the specified cement content
used as per design mix is payable / recoverable separately.
26.73.1 Concrete Grade-M-40 (cement content 400 kg )
26.73.1.1 100 mm thick hollow core slab metre 1152.35
26.73.2 Extra for using M-50 (Cement content 425 kg) instead
of M-40
26.73.2.1 100mm thick hollow core slab metre 17.30
441
No.
of M-40
26.74 Fabrication and manufacturing of solid precast concrete
element with provisions of shear keys, connecting loops, dowel
tubes and proper lifting accessories for walls, beams, slabs,
stairs, column etc, of various thickness, shape and size of
different concrete grades manufactured in controlled factory
environment with approved methodology including moulds
(Pallet system, Tilts form, table moulds, battery moulds, vertical
moulds, beam moulds, column moulds, staircase moulds,
Facade mould, etc.), mixing, transporting and placing of
concrete, vibrating, curing, finishing, making necessary cutout/
holes of required sizes for services, yard handling & stacking
all complete as per IS 11447:1985 and as per approved shop
drawings and design mix as per the direction of Engineer-in-
Charge (Cost of reinforcement, Mechanical, Electrical and
Plumbing inserts will be paid separately).
26.74.1 Concrete grade M-35 (Cement content 370 kgs) cum 14554.65
of M-35 cum 230.90
of M-35 cum 423.30
of M-35 cum 538.75
26.75 Providing & laying in position Prestressing steel strands (low
relaxation) on hollow core bed by using mechanical pulling
arrangement like Rabbit/ Bed master including all accessories
for Stressing & destressing operations as per approved make
conforming to IS1343 & grade FY-1860 etc, complete as per
drawings and direction of Engineer -in-charge. kg 144.55
26.76 Transportation of Precast Elements by flat bed Trailor (Double
/ Triple axle 40ft Length with proper accessories like A frame
etc) from factory, including the cost of loading , unloading &
stacking at site with the help of required capacity cranes.
26.76.1 Lead within 15km MT 444.05
26.76.2 Add/Deduct over item 26.76.1 for every additional
lead of 5 km MT 97.20

442
No.
26.77 Erection & Installation of Precast/Prestressed Concrete

elements in correct & final position with proper line level and
plumb at site making all arrangements (i.e cranes, push-pull
jacks & all another T & P for lifting Placing & Alignment of
elements, within erection tolerance as per IS 15916 as per
approved shop drawings and all complete as per the direction
of Engineer-in-Charge but excluding the cost of sim pads, non
shrink grout and steel works i.e hangers. All work up to fifth
floor.
26.77.1 Prestressed hollow core Slab up to 200 mm thickness sqm 160.85
26.77.2 Prestressed hollow core slab above 200 mm up to
400 mm thickness sqm 277.15
26.77.3 Solid concrete wall elements cum 2147.55
26.78 Providing & Applying weather proof sealant on outer joints of
approved make confirming to IS & directed by Engineer-in-
charge.
26.78.1 Sealant 25mmx10mm at joints metre 137.00
26.79 Providing & Laying of levelling sim pads required sizes (5x5cm
to 10x10cm) of PVC / Rubber to adjust level of bearing surface
of supporting members as per the direction of Engineer in
charge.
26.79.1 2mm thick each 23.65
26.79.2 5 mm thick each 30.35
26.79.3 10 mm thick each 43.70
26.80 Providing & Grouting of dowel tubes / Shear keys / Joints of
precast members with M-60 grade cementitious grout (Non
Shrink) of approved make by suitable means ( Free flowing /
pump),curing etc. Complete as per directions of Engineer-in-
charge. (The payment shall be made on the basis of actual
weight of approved grout injected.)
26.80.1 Stirrer mixed cementitious grout (non shrink) of approved
make in dowel tubes / Shear keys / Joints of precast
members. kg 74.25
26.81 Providing and fixing Scaffolding net of required width made
of high density Polyethylene UV stabilized knitted on warp
knitting machines having density 100gm/sqm and shading
coefficient minimum 75% around the construction site/ for
vertical extension as per requirement including fastening/tying
with building/scaffolding pipes or with any other fixtures etc.
complete as per direction of Engineer-in-Charge. (One time
payment shall be made for providing Scaffolding net from start
of work till completion of work including shifting if any.
The Scaffolding net shall be the property of the contractor on
completion of the work) sqm 24.20

443

DSR Vol. 2

Uploaded by

Copyright:

DSR Vol. 2

Uploaded by

Document Information

Original Description:

Copyright

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

DSR Vol. 2

Uploaded by

Copyright:

Hkkjr ljdkj

egkfuns”kd] ds-yks-fu-fo-] ubZ fnYyh ds izkf/kdkj ds v/khu izdkf”kr

A GOVERNMENT OF INDIA PUBLICATION

JAIN BOOK AGENCY JAIN BOOK DEPOT

JAIN BOOK AGENCY (SOUTHEND) JAIN BOOK AGENCY (GURGAON)

JAIN BOOK AGENCY (INTERNATIONAL) JAIN BOOK AGENCY (GREATER NOIDA)

Place: New Delhi (PRABHAKAR SINGH)

6. Following are the Salient Features of DSR- 2018:

6.1 DSR-2018 is bilingual and in two volumes.

Salient Modifications and Changes in Sub Heads:

8.0 New Technologies and Materials

8.4 GFRG items (item no.26.51 to 26.61)

8.5 Speed floor system (Item no.26.62 to 26.64).

8.9 Prefab/Precast technology (Item no.26.73 to 26.80)

8.10 Scaffolding net (Item no. 26.81)

And suggestions for improvement are always welcome.

0.1 HIRE CHARGES OF PLANTS & MACHINERY 2

0.4 CARRIAGE CODES 61

5. Reinforced Cement Concrete 90

6. Masonry Work 105

7. Stone Work 113

8. Cladding Work 120

9. Wood and PVC Work 130

10. Steel Work 179

11. Flooring 188

12. Roofing 203

14 Repairs to Building 240

15 Dismantling and Demolishing 256

16 Road Work 264

17 Sanitary Installations 289

18 Water Supply 314

20 Pile work 371

21 Aluminium Work 378

22 Water Proofing 385

23 Rain Water Harvesting & Tubewells 394

24 Conservation of Heritage Buildings. 400

25 Structural Glazing Aluminium Composite Panel 404

26 New Technologies and Materials 411

C. CEMENT CONSUMPTION STATEMENT 444

D. BITUMEN CONSUMPTION STATEMENT ......

Note: For Sub Heads 1 to 12 refer to Vol. 1

Code Description Unit Rate

SUB HEAD : 13.0 FINISHING 225

0821 Distemper primer litre 70.00

SUB HEAD : 13.0 FINISHING 226

SUB HEAD : 13.0 FINISHING 227

SUB HEAD : 13.0 FINISHING 228

13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a

SUB HEAD : 13.0 FINISHING 229

13.23 Extra for plastering on circular work not exceeding 6 m in radius:

SUB HEAD : 13.0 FINISHING 230

POINTING ON STONE WORK

SUB HEAD : 13.0 FINISHING 231

SUB HEAD : 13.0 FINISHING 232

SUB HEAD : 13.0 FINISHING 233

13.62 Painting with synthetic enamel paint of approved brand and

SUB HEAD : 13.0 FINISHING 234

SUB HEAD : 13.0 FINISHING 235

SUB HEAD : 13.0 FINISHING 236

SUB HEAD : 13.0 FINISHING 237

SUB HEAD : 13.0 FINISHING 238

SUB HEAD : 13.0 FINISHING 239

Code Description Unit Rate