--------------------------

MISCELLANEOUS
CONSTRUCTION
MATERIALS
--------------------------
 Miscellaneous Construction Materials

1. Concrete – 4 Types, and Brands

A. Admixtures
B. Cement for Plastering
C. Concrete Pavers/Blocks

2. Styrowall Panel – replacement for CHB Walls

3. Formworks
A. Metal
-Forms (e.g. Steel Deck)
-Scaffolds
1.) G.I. Pipes & Clamps
2.) H-Frames, et. al
B. Plastic

4. Finishing Layers
A. Hardiflex
B. Acoustical Boards
C. Metal Ceilings
D. Metal Tile Ceilings
E. Metal Walls
F. Gypsum Boards

5. Metal Frameworks
A. T-runners, et. al (for ceiling acoustical boards
B. Furrings, et. al (for ceiling Gypsum Boards)
C. Metal Wall Studs

6. Others
A. Flooring –Engineered Planks (e.g. Hornitex)
B. Fiber Cement Boards for Wall Sidings

Present for each item:

A. Picture/s
B. Brief use
C. Specifications for estimates
-------------------------------------
1. CONCRETE
-------------------------------------
-------------------------
A. Admixtures
-------------------------
 -------------------------------------
PERMA PLAST
Water Reducer Admixture
-------------------------------------
These are used for making waterproof fascade coatings, grout and concrete. In addition, their
range increases the workability in concrete used in casting pre-cast units and cement tiles.
Water Reducers must meet requirements of ASTM C 494 - Type A
---------------------------------------------------
Specifications:
---------------------------------------------------
Form: Liquid
Minimum Order Quantity: 30 kgs
Physical State: Liquid
Packaging Type: Plastic Can
Dosage: 250 - 500 g /50 kg of cement
---------------------------------------------------
 -------------------------------------
MAPEI Expancrete
Air-Entraining Admixture
-------------------------------------
When mixed with concrete, this admixture produces microscopic air bubbles called as
entrained air, which helps improve workability and reduce bleeding and segregation of
concrete mixtures.
Air entraining admixtures must meet the requirements of ASTM C 260
---------------------------------------------------
Specifications
---------------------------------------------------
Form: Powder
Minimum Order Quantity: 20 kgs
Physical State: Powder
Packaging Type: Polyethylene bags
Dosage: 5-8 kg /100 kg of cement
---------------------------------------------------
 -------------------------------------
PANTARHOL 90 (VZ)
Set Retardant Admixture
-------------------------------------
Set Retardants are used to delay the initial setting of concrete by an hour or more. This
admixture is often used in hot weather.
Set Retardant Admixtures must meet requirements of ASTM C 494 – Type B or D
---------------------------------------------------
Specifications
---------------------------------------------------
Form: Liquid
Minimum Order Quantity: 1 Liter
Physical State: Liquid
Packaging Type: Plastic Container
Dosage: 2-10 mL /1 kg of cement
---------------------------------------------------
 -------------------------------------
Sikaset - L
Accelerator Admixture
-------------------------------------
Accelerators reduce the initial set time of concrete and give higher early strength. It is often
used in fast track construction requiring early form removal like traffic applications.

Accelerators must meet requirements of ASTM C 494 – Type B or D

-----------------------------------------------------
Specifications
-----------------------------------------------------
Form: Liquid
Minimum Order Quantity: 1 Liter
Physical State: Liquid
Packaging Type: Plastic Container
Dosage: 2280-4560 mL /100 kg of cement
------------------------------------------------------
 -------------------------------------
QUIKRETE
Liquid Cement Color
-------------------------------------
This admixture allows you to add color desired for your plaster. Ideal for use in making
cement tiles and plaster finish
---------------------------------------------------
Specifications
---------------------------------------------------
Form: Liquid
Minimum Order Quantity: 296mL
Physical State: Liquid
Packaging Type: Plastic Bottle
Dosage: 2 bags or 80kg cement/ Bottle

---------------------------------------------------
-------------------------------------
1. CONCRETE
-------------------------------------
-------------------------
B. Cement for Plastering
-------------------------
 -------------------------------------
POWAFIX
White Cement
-------------------------------------
White cement can be used for plastering and filling walls wherein white plaster finish is
desired.
--------------------------------------------------------
Specifications
--------------------------------------------------------
Form: Powder
Minimum Order Quantity: 1 kg, 5 kgs, 50 kgs
Physical State: Solid
Packaging Type: Polyethylene bags
Dosage: 2 kgs white cement/ 1 Liter of water
--------------------------------------------------------
-------------------------------------
1. CONCRETE
-------------------------------------
-----------------------------------
C. Concrete Pavers/Blocks
-----------------------------------
 -------------------------------------
Interlock American Brick
Concrete Paver/Block
-------------------------------------
The aesthetics and ease of maintaining makes it a preferred material for making sidewalks
and walkways.
--------------------------------------------------------
Specifications
--------------------------------------------------------
Form: Block
Minimum Order Quantity: Individual
Physical State: Solid
Dimensions: 65 x 20 x 60 mm
Strength: 30-50 MPa
--------------------------------------------------------
-------------------------------------
2. STYROWALL PANEL
-------------------------------------
 -------------------------------------
Covintec
StyroWall Panel
-------------------------------------
This is used to serve as wall. It is composed of Styroboard covered with wire mesh.
It is an alternative material that can be used over Concrete Hollow Blocks.
--------------------------------------------------------
Specifications
--------------------------------------------------------
Minimum Order Quantity: 1 Panel
Dimensions: 1.22 m x 2.44 m x 0.10 m
(4 inches)
--------------------------------------------------------
--------------
Installation
--------------
----------
Result
----------
 -------------------------------------
3. FORMWORKS
-------------------------------------
------------------------------------------
A.1 Metal Formworks
-------------------------------------------
-------------------------------------
AJ Group
Steel Concrete Formwork
-------------------------------------
 -------------------------------------
AJ Group
Steel Concrete Formwork
-------------------------------------
Steel Concrete Formworks are braced metal panels put together by bolts, or hooks, and held
by scaffolds. This provides the shape needed to form the concrete.

-------------------------
Specificatons
-------------------------
Flat Formwork
Length: 1800/1500/1200/900mm
Width: 600/500/450/300/200/150mm
Height: 55mm
Thickness of metal sheet: 3mm -5mm
Customized size: Available

Circular Column Formwork

Height: 1500/1000mm
Diameter: 600/500/400/300mm
Thickness: 3mm – 5mm
Customized size: Available
 -------------------------------------
AJ Group
Steel Concrete Formwork
-------------------------------------
----------------
Specificatons
----------------
Material: Q234 Carbon Steel
Color: Orange, Dark Red, Blue, or as you require
Minimum Order Quantity: 100 pieces
 -------------------------------------
3. FORMWORKS
-------------------------------------
-----------------------------------------------------
A.2.1 Galvanized Iron Pipes and Clamps
-----------------------------------------------------
 ----------------------------------------------------------------------
JN Steel
Galvanized Steel Pipe and Scaffolding GI Pipe Clamp
----------------------------------------------------------------------
GI Pipes and GI Pipe Clamps are put together to form Scaffoldings. These provide access to
high reach areas in construction of buildings, etc.

-------------------------
Specificatons
-------------------------
Standard: ASTM A106-2006
Grade: A53, Q235, Q345, Q19
Place of Origin: Tianjin, China (Mainland)
Shape: Round
Thickness: 0.8 -10 mm
Outer Diameter: 20-219 mm
Surface: Galvanized Coated
End Protector: Plastic Pipe Cap/Iron Cap
Length: 1-12 m
----------------------------------------------------------------------
GOWE
Scaffolding GI Pipe Clamp
----------------------------------------------------------------------
It is used to clamp two GI Pipes together to form Scaffolds.

-------------------------
Specificatons
-------------------------
Standard: BS1139, EN74
Grade: Q235
Place of Origin: Tianjin, China (Mainland)

Outer Diameter: 20-219 mm

Surface: Electro galvanized, HDG
Minimum Order Quantity: 25 metric tons
Size: 48.3 mm, 48.3 mm, 48.3 mm
 -------------------------------------
3. FORMWORKS
-------------------------------------
-----------------------------------------------------
A.2.2 H-Frames
-----------------------------------------------------
----------------------------------------------------------------------
GOWE
Scaffolding H Frame
----------------------------------------------------------------------
A simple frame that when assembled, be used as scaffolds.

-------------------------
Specificatons
-------------------------
H Frame
Main Tube: 42 x 2.2 mm
Inner Tube: 25 x 1.8 mm
Frame Dimensions: 1219 x 1700/1219/914 mm
Unit Weight: 9.59 - 15.28 kg/pc
Grade: Q195
Place of Origin: Tianjin, China (Mainland)
 -------------------------------------
3. FORMWORKS
-------------------------------------
-----------------------------------------------------
B. Plastic Formworks
-----------------------------------------------------
 ----------------------------------------------------------------------
ADTO Group
Plastic Concrete Formwork
----------------------------------------------------------------------

Plastic Concrete Formworks are plastic panels put together by custom punch screws or latch,
No scaffold is needed, only shoring to keep the forms upright. This provides the shape needed
to form the concrete.
 -------------------------
Specificatons
-------------------------
Working Loading: 60 kN/m2

Flat Formwork
Dimensions: 730 x 750 x 70 mm

Circular Column Formwork

Height: 750 mm
Diameter: 600/500/400/300mm
Thickness: 70 mm
-------------------------------------
4. FINISHING LAYERS
-------------------------------------
-------------------------
A. Hardiflex
-------------------------
 ----------------------------------------------------------------------
James Hardie - HardieFlexTM Sheet
Fiber Reinforced Cement Sheet
----------------------------------------------------------------------
It is used to make walls, external claddings, and soffit linings.

-------------------------
Specificatons
-------------------------
Length (mm) Width (mm) Thickness (mm) Mass (kg/ m2)
1800 900 4.5 6.50
1800 1200 4.5 6.50
2100 1200 4.5 6.50
2400 900 4.5 6.50
2400 1200 4.5 6.50
2700 1200 4.5 6.50
3000 900 4.5 6.50
3000 1200 4.5 6.50
1800 1200 6.0 8.69
2400 900 6.0 8.69
2400 1200 6.0 8.69
2700 1200 6.0 8.69
3000 900 6.0 8.69
3000 1200 6.0 8.69
-------------------------------------
4. FINISHING LAYERS
-------------------------------------
-------------------------
B. Acoustical Boards
-------------------------
 ----------------------------------------------------------------------
SZ Acoustic
Acoustical Boards
----------------------------------------------------------------------
These are often used in recording studios and large halls to minimize the
echoing of sound known as reverb, a side effect of having large area of concrete
surrounding a room. It also prevents from allowing sound to enter into and out
of the room.
----------------------------------------------------------------------
SZ Acoustic Tiles
----------------------------------------------------------------------
-------------------------
Specificatons
-------------------------
-------------------------------------
4. FINISHING LAYERS
-------------------------------------
---------------------------
C. Metal Ceilings
----------------------------
 ------------------------------------------------
UNION GALVASTEEL – Hi Rib
Metal Roofing, Walling and Claddings
------------------------------------------------
These prefabricated metal sheets can be used as roofing, walling, ceiling, and external
claddings.
-----------------------------------------------------------------------------------
Specifications
-----------------------------------------------------------------------------------
Standard: ASTM A 792, PNS 1993, ISO 9364
Nominal Thickness: 0.40 mm to 0.60 mm
Feed Width: 1220 mm
Effective Coverage: 918 mm
Length: up to 20 meters
Rib Height: 50 mm
Paint Coating System: Epoxy Primer, Polyester Top and Back Coat
Colors: Red, Green, Blue, Orange, White, Brown, Custom
-----------------------------------------------------------------------------------
------------------------------------------------
UNION GALVASTEEL – Hi Rib
Metal Roofing, Walling and Claddings
------------------------------------------------

---------------------------------------
Sample of Material Application
---------------------------------------
-------------------------------------
4. FINISHING LAYERS
-------------------------------------
---------------------------
D. Metal Ceiling Tiles
----------------------------
 ------------------------------------------------
BURGESS Plain Metal Clip-In
Metal Tile Ceilings
------------------------------------------------

These suspended metal ceiling tiles provide aesthetic finish to ceilings.

-------------------------------------
4. FINISHING LAYERS
-------------------------------------
---------------------------
D. Metal Walls
----------------------------
 ------------------------------------------------
ATAS Belvedere 7.2” Rib
Metal Roofing, Walling and Claddings
------------------------------------------------
These prefabricated metal sheets can be used as roofing, walling, ceiling, and external
claddings.
-------------------------------------------------------------------------------------------------
Specifications
-------------------------------------------------------------------------------------------------

Material: Aluminum – Zinc Coated Steel with Acrylic Coating

Panel Coverage: 36 inches = 914.40 mm
Minimum Panel Length = 6 ft = 1.83 m
Rib Height: 1 ½ inches = 38.10 mm
Paint Coating System: Epoxy Primer, Polyester Top and Back Coat
Colors: Red, Green, Blue, Orange, White, Brown, Custom
-------------------------------------------------------------------------------------------------
-------------------------------------
4. FINISHING LAYERS
-------------------------------------
-----------------------------------
E. Gypsum Boards/Drywalls
-----------------------------------
 -----------------------------------------------------------------------------------------
Saint Gobain – CertainTeed
Regular Gypsum Board
------------------------------------------------------------------------------------------
Regular Gypsum Boards are for use on interior walls and ceilings. The material
being made of gypsum core, and ivory face paper and liner back paper makes
the gypsum board resistive from fire.

--------------------------------------
Specifications
--------------------------------------
Board Size Square Feet
1220 mm x 2440 mm 2.97 m2
1220 mm x 3050 mm 3.72 m2
1220 mm x 3660 mm 4.46 m2

Thickness Weight
1/4” (6.4 mm) 5.5 kg/ m2
3/8” (9.5 mm) 6.1 kg/ m2
1/2”(12.7 mm) 7.8 kg/ m2

Standard: ASTM C 1396

 -----------------------------------------------------------------------------------------
Saint Gobain - CertainTeed
Regular Gypsum Board
------------------------------------------------------------------------------------------
-------------------------------------
5. METAL FRAMEWORKS
-------------------------------------
-----------------------------------
A. Tee Runner
-----------------------------------
 ------------------------------------------------
WRIGHT – Tee Runner
------------------------------------------------
Tee Runners are Tee Bars placed horizontally in a grid that hold the Suspended Ceiling Tiles.
-------------------------------------------------------------------------------------------------------
Specifications
-------------------------------------------------------------------------------------------------------

NAME BASE x HEIGHT x LENGTH PIECES / CTN RATIO/ m2

Main Tee 38mm x 24mm x 10ft 25 0.75
Cross Tee 28mm x 24mm x 4ft 50 1.3
Cross Tee 28mm x 24mm x 2 ft 50 1.3
Angle Tee 24mm x 24mm x 10 ft 50 0.4
 ------------------------------------------------
WRIGHT – Tee Runner
------------------------------------------------
-------------------------------------------------------------------------------------------------------
Installation
-------------------------------------------------------------------------------------------------------
-------------------------------------
5. METAL FRAMEWORKS
-------------------------------------
-----------------------------------
B. Furring Channel
-----------------------------------
 ------------------------------------------------
ClarkDietrich®
Furring / Hat Channel
------------------------------------------------
It is used to furr out masonry walls and ceiling assemblies. It is where the Concrete Nails or
Fasteners are driven when installing the Gypsum Board.
--------------------
Specifications
--------------------
7/8” Furring Channel Systems
Gauge Mils Size Pieces/Bundle
25 18 7/8” 10
20 DW 30 7/8” 10
20 STR 33 7/8” 10
18 43 7/8” 10
16 54 7/8” 10

1 ½” Furring Channel Systems

Gauge Mils Size Pieces/Bundle
25 18 1 ½” 10
20 DW 30 1 ½” 10
20 STR 33 1 ½” 10
18 43 1 ½” 10
16 54 1 ½” 10
 -
-----------------------------------------------
ClarkDietrich®
Furring / Hat Channel
------------------------------------------------
---------------
Installation
---------------
-------------------------------------
5. METAL FRAMEWORKS
-------------------------------------
-----------------------------------
C. Metal Wall Studs
-----------------------------------
 ------------------------------------------------
ClarkDietrich
Metal C-Stud
------------------------------------------------
It is used to support the boards covering the wall.
----------------------------------------------------------------------------------------------------------------
Specifications
----------------------------------------------------------------------------------------------------------------
Standard Web Size: 75 mm
Standard Lengths: 3 m
Flange Sizes: 33mm – 33.5 mm
Thickness: 0.40mm – 0.60 mm
Standard coating: CP60 (G90 available)
-----------------------------------------------------------------------------------------------------------------
 -------------------------------------
6. OTHERS
-------------------------------------
-------------------------------
A. Flooring - Engineered Planks
-------------------------------
 ----------------------------------------------------------------------------
Armstrong Flooring Prime Harvest Engineered Oak ½” x 5”
Engineered Hardwood
----------------------------------------------------------------------------
Engineered Hardwood is used as flooring for structures like home or office and has
advantage of being used where moisture and excessive heat is present.
.-----------------------------------------------
Specifications:
------------------------------------------------
Species: Oak
Size: 5”
Thickness: ½” Illustration showing multiple
Board Length: 9” – 46 ½” layers of Engineered hardwood
------------------------------------------------
-------------------------------------
6. OTHERS
-------------------------------------
--------------------------------
B. Fiber Cement Boards
--------------------------------
 -------------------------------------
JOINBLING Bestin Board
Fiber Cement Boards
-------------------------------------
Fiber Cement Boards are used as wall sidings. Fiber cement materials make fiber cement
boards fireproof and provide insulation
----------------------------------------------------------------
Specifications:
----------------------------------------------------------------
Size: 1220 mm x 2440 mm or 1220mm x 3050 mm
Thickness: 4.5, 5, 6, 8, 10, 12, 15, 20, 25, 30 mm
----------------------------------------------------------------