Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    ToolBox Talk Electrical 2-26-13

    Uploaded by

    Abhjith
    Electrical safety is important to avoid injury from electric shock, burns, and electrocution. According to OSHA statistics, electrical incidents cause over 300 deaths and 4000 injuries requiring time off work annually in the US. Proper precautions include using ground fault circuit interrupters (GFCIs) which shut off power within 1/40th of a second if electrical leakage is detected, inspecting extension cords for damage before temporary use, and having a fire extinguisher on hand to quickly address any electrical fires. Workers should follow electrical safety guidelines and use proper protective equipment to avoid contact with overhead power lines or exposed conductors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ToolBox Talk Electrical 2-26-13

    Uploaded by

    Abhjith
    30 views3 pages
    Electrical safety is important to avoid injury from electric shock, burns, and electrocution. According to OSHA statistics, electrical incidents cause over 300 deaths and 4000 injuries requiring time off work annually in the US. Proper precautions include using ground fault circuit interrupters (GFCIs) which shut off power within 1/40th of a second if electrical leakage is detected, inspecting extension cords for damage before temporary use, and having a fire extinguisher on hand to quickly address any electrical fires. Workers should follow electrical safety guidelines and use proper protective equipment to avoid contact with overhead power lines or exposed conductors.

    Original Description:

    Electrical Safety.

    Original Title

    ToolBox Talk Electrical 2-26-13 (3)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Electrical safety is important to avoid injury from electric shock, burns, and electrocution. According to OSHA statistics, electrical incidents cause over 300 deaths and 4000 injuries requiring time off work annually in the US. Proper precautions include using ground fault circuit interrupters (GFCIs) which shut off power within 1/40th of a second if electrical leakage is detected, inspecting extension cords for damage before temporary use, and having a fire extinguisher on hand to quickly address any electrical fires. Workers should follow electrical safety guidelines and use proper protective equipment to avoid contact with overhead power lines or exposed conductors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views3 pages

    ToolBox Talk Electrical 2-26-13

    Uploaded by

    Abhjith
    Electrical safety is important to avoid injury from electric shock, burns, and electrocution. According to OSHA statistics, electrical incidents cause over 300 deaths and 4000 injuries requiring time off work annually in the US. Proper precautions include using ground fault circuit interrupters (GFCIs) which shut off power within 1/40th of a second if electrical leakage is detected, inspecting extension cords for damage before temporary use, and having a fire extinguisher on hand to quickly address any electrical fires. Workers should follow electrical safety guidelines and use proper protective equipment to avoid contact with overhead power lines or exposed conductors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Tool Box Talk: Electrical Safety

    Electric shock can cause burns, shocks, falls


    and electrocution (death)

    According to the Bureau of Labor Statistics, for the last decade, electrical injury has been
    responsible for an average of 320 workplace deaths and over 4,000 injuries involving days away
    from work annually in the United States.

    Precautions for avoiding electrical shocks include, but not limited to the following:

    General safety precautions:


    Safety to personnel and safe operation of machines and tools should be of uppermost importance
    in all considerations of using electricity on the jobsite. Electrical problems are among the most
    commonly cited OSHA violations. There are many specific standards that address electrical
    safety. Refer to the OSHA regulations for specific applications.

    Ground Fault Circuit Interrupters: The GFCI is a fast acting device that senses a small
    current leakage to ground. Within 1/40 of a second it shuts off the electricity and “interrupts” the
    current flow. It provides effective protection against shocks and electrocution. OSHA requires
    GCFIs or an assured equipment grounding conductor program on all construction sites and
    projects.

    Extension Cords: Extension cords are convenient ways to provide power to portable equipment.
    However, they are often misused, resulting in injuries and expensive OSHA fines. The most
    important thing to remember is that extension cords are for temporary use only. Inspect
    extension cords for physical damage before use. Check wattage rating on the tool being used
    with the extension cord; do not use an extension cord that has a lower rating. Don’t use extension
    cords marked for indoor use outdoors. Don’t plug one extension cord into another.

    Electrical Fires: On construction sites, an electrical fire that may occur is when portable tools
    overload a power source. If possible to do safely, immediately disconnect the tool or power cord
    from the power source; this usually results in the electrical fire being extinguished. A Class C or
    multi-purpose fire extinguisher may also be used to ensure the fire is out.

    ELECTRICAL SAFETY

    Do:
     Do inspect all electrical equipment daily prior to use, and tag as needed and report
    damaged tools to supervisor.

    Through the OSHA and SWRInstitute Alliance, the SWRInstitute developed this toolbox talk for
    informational purposes only. It does not necessarily reflect the official views of OSHA or the U.S.
    Department of Labor.
     Do survey the work site for overhead power lines and other electrical hazards when using
    ladders or working platforms. Maintain the required distance from electrical equipment
    and conductors. This distance depends on the voltage hazard.
     Do provide adequate overload and short-circuit protection for safe operation. The
    interrupting capacity of all breakers and fuses must be sufficient to clear the fault current
    rapidly and without damage to itself.
     Do provide cord protection for flexible cords and cables passing through doorways or
    other pinch points.
     Do keep a fire extinguisher on work site at ALL times. The standard procedure for
    fighting electrical fires is to open the circuit and then apply an approved extinguishing
    agent. A carbon dioxide (CO2) extinguisher offers the advantage of extinguishing the
    fire, cooling the apparatus, leaving no residue, and having no adverse affect on the
    insulation and metal parts; it may be used on live circuits. CO2 should not be used in
    confined spaces, unless a breathing apparatus is used. A dry chemical extinguisher may
    be used; however it will leave a residue.
     Do avoid mixing water and electricity. Keep electrical equipment, hands and feet, and
    working surface dry.
     Do check all electrical equipment and notify others that are also connected to the power
    source before resetting GFCI or breakers.
     Do use a GFCI on all construction sites.

    Do Not:

     Do not use Shop Made Cords with Receptacle Boxes. Among the most common
    electrical violations is when a multiple receptacle box, designed to be surface mounted, is
    fitted with a flexible cord and is placed on the floor to provide power to various tools or
    equipment. These are not permitted and should be taken out of service.
     Do not use a length or size (wire gauge) extension cord that exceeds the max
    recommended by tool manufacturer.
     Do not splice extension cords with electrical tape. Splices should be approved permanent
    splices. Hard service flexible cords 12 AWG or larger may be repaired if spliced so that
    the splice retains the insulation, outer sheath properties, and usage characteristics of the
    cord being spliced.
     Do not leave extension cords in walk ways or work areas causing a trip hazard.
     Do not use worn frayed or damaged cords
     Do not fasten extension cords with staples, hang from nails, or suspend from wire.
     Do not exit your vehicle if it comes in contact with electricity. Drive away until the electricity is
    no longer in contact with you vehicle. If the engine stops running, call 911 for assistance.

    Through the OSHA and SWRInstitute Alliance, the SWRInstitute developed this toolbox talk for
    informational purposes only. It does not necessarily reflect the official views of OSHA or the U.S.
    Department of Labor.
    Review Questions:

    1) A GFCI senses electrical leakage?


    A) True
    B) False
    2) A Fire extinguisher should not be onsite all times in case of electrical or other types of
    fire?
    A) True
    B) False
    3) Worn extension cords should be removed from service?
    A) True
    B) False
    4) The human body has a low resistance to electricity; this makes it a good conductor?
    A) True
    B) False

    Talk Given By: ___________________________ Date: ______________________


    Company: _______________________________ Location: ___________________

    Printed Name Signature

    Through the OSHA and SWRInstitute Alliance, the SWRInstitute developed this toolbox talk for
    informational purposes only. It does not necessarily reflect the official views of OSHA or the U.S.
    Department of Labor.

    You might also like