02 - O&M CCTV Manual PDF

“Providing Life Safety across Texas”
Operations & Maintenance Manual

Video Surveillance System
Specification Section 282300
Installation At:
HISD Mickey Leland College Prep Academy

1700 Gregg Street
Houston, Texas 77020
CLST Project #C1552
Prepared For:
Prime Contractors
17355 Village Green Drive
Houston, Texas 77040
5206 EAST THIRD STREET, KATY, TEXAS, 77493

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
Table Of Contents
System Certification & Warranty Section 1
Equipment Data Sheets Section 2
System Operation Manual Section 3
Record Drawings Section 4

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
SYSTEM CERTIFICATION
& WARRANTY 1

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
Interlogix Return & Warranty Policy for Dealers
April 13, 2016
This Return & Warranty Policy for Dealers (“Policy”) applies to heading “Warranty repair/replacements” above.
products and services purchased directly from the following UTC For items that do not appear in Table 1, contact Customer Service or
Fire & Security Americas Corporation, Inc. business: Interlogix or your sales representative for the applicable policy.
its successors or assigns (“Interlogix”) by an independent dealer
approved by Interlogix for resale to homeowners or independent TABLE 1: Product Warranty Periods
business integrators (“Dealers,” “you,” or “your”).
Warranty
The terms and conditions of this Policy are subject to change. The Product
Period
most recent version of the Policy controls, and will generally be
Proximity readers Lifetime
available at the Interlogix website at www.interlogix.com. If you
Cards (minimum 10 cards for return) 5 years
have questions about this Policy, contact the appropriate customer
Manufactured hardware 2 years
Access
service center or your sales representative.
Magstripe cards 1 year
All periods of days set forth herein are calendar days unless
Facility Commander Wnx, Picture Perfect,
otherwise stated.
Secure Perfect, Topaz, Diamond, Sapphire, 1 year
Alliance, Director, other software products
Warranty Repair/Replacements Fire alarm control panels 3 years
Subject to the terms and conditions of the limited warranty in Air duct detectors 3 years
effect at the time of purchase, which is set forth in the UTC Fire & Heat detectors 3 years
Fire
Security Terms and Conditions of Sale for Interlogix available at Notification appliances 3 years
our website, www.interlogix.com, and the terms and conditions of Pull stations, fire stations 3 years
this Policy, Interlogix will repair or replace defective or non- Smoke detectors 3 years
working product within the product’s warranty period set forth in
Computers, computer option cards, file
this Policy. Interlogix reserves the right to replace any product 1 year
servers, monitors, touchscreens
under warranty with new, refurbished or remanufactured product or
to refund the purchase price. For product purchased by a Dealer Hardwired contacts, hardwired sensors,
5 years
from a distributor approved by Interlogix (“Distributor”), the Intrusion passive modules and components
Dealer should check with its Distributor for the terms of the return, Wireless sensors 2 years
which will be governed by the Return & Warranty Policy for Security controls, panels, powered modules
Distributors rather than this policy. and components (e.g., Simon XT,
AdvisorOne, ZeroWire, NetworX IP 2 years
Product warranty repair/replacements of Interlogix product Communications Module, touchscreens,
purchases are only permitted for defective or non-working cellular modules, etc.)
product, which may be established via product IFS fiber transmission and UTP products Lifetime
troubleshooting with the Interlogix Tech Support department. IFS network products and media converters 3 years
Video and Transmission
In cases of established product failure for products Dealer IFS power supplies for transmission products 2 years
purchased directly from Interlogix, the Interlogix Tech Fiber Options fiber optic products 5 years
Support department will provide a case number to provide TruVision and UltraView fixed cameras 3 years
Customer Service or to submit in an RMA form. If a Dealer
TruVision analog and IP PTZ cameras 3 years
returns product to Interlogix, and Interlogix determines the
product is in working condition or NTF (No Trouble Found) then UltraView analog PTZ cameras 3 years
no compensation for the cost of the unit will be provided by UltraView IP PTZ cameras 2 years
Interlogix to the Dealer under the product warranty, even if the TruVision and UltraView LCD monitors 3 years
Dealer has conducted an exchange of the product for a customer. TruVision DVRs and NVRs 3 years
TruVision encoders and decoders 3 years
If the Dealer seeks product warranty repair/replacements of
Other
Interlogix products purchased from a Distributor, then such

Third-party manufactured product (i.e., Dell Third-party
repairs and replacements are governed by the Return & Warranty
monitors, etc.) warranty
Policy for Distributors rather than this policy. In such cases,
please contact your Distributor for details concerning warranty
repairs and replacements for Interlogix products purchased from a B-stock products 1 year
Distributor. UltraSync™ None
In the event of any dispute regarding the terms or applicability of a
warranty, Interlogix, in its sole discretion, shall determine whether
a warranty applies and, if it does, the terms and conditions of such
warranty.
NO IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR IMPLIED WARRANTY
ARISING FROM COURSE OF DEALING OR USAGE OF
TRADE SHALL APPLY.
Warranty periods vary based on product category and type of

equipment, as shown in Table 1 entitled “Product warranty
periods” below.
Product Warranty Periods

Table 1 lists warranty durations for most Interlogix equipment,
sorted by category. Warranty periods start as set forth under the
Warranty & Return Policy © 2016 United Technologies Corporation. All rights reserved.
Interlogix is a part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. Page 1
April 13, 2016
Returning Interlogix Products Tech Support

Before you can return any product to Interlogix, you must obtain a
return material authorization (RMA). This applies to all product Security Technical Support
returns, including warranty repair/replacements, non-warranty • Phone: 855.286.8889, Option 2
repairs, advance replacements, and credit returns. • E-mail: techsupport@interlogix.com
For Advance Replacement the Dealer (regardless of whether the
product has been purchased directly from Interlogix or a Distributor) Non-Warranty Repairs
must first obtain a Tech Support Case Number by calling the
Interlogix Tech Support department. In order to obtain a Tech Dealer will be charged for all repairs and shipping costs for
Support Case Number the Dealer must contact the Tech Support products that are not within the product warranty period or that are
department while the product is still installed and attempt to not under warranty. For all such non-warranty repairs, Interlogix
troubleshoot any issue. If the Tech Support department determines will provide a repair estimate that includes charges for parts, labor
that the product must be returned for further evaluation they will (in half-hour increments) and shipping.
issue a Tech Support Case Number, which is required before any
Advance Replacement will be accepted. Products receiving non-warranty repairs are granted an extended
To obtain an RMA, contact the appropriate Interlogix customer warranty of 90 calendar days from the date of shipment from
service center (see “Customer Service Centers”) for your product, Interlogix back to the Dealer following the non-warranty repair,
and have the product and the following information ready: except for fire products, which instead are granted an extended
• Customer account # (required for all RMA requests) warranty of one year.
• Original PO (If the original PO is not provided, the
processing time may be delayed for warranty
repair/replacements, advance replacements, and other Advance Replacement
returns and replacements subject to a time limit. If the In addition to product returns under our limited warranty, we offer
original PO is not provided, Interlogix will attempt to advance replacement, which is provision of a replacement product
validate the purchase of the product within the applicable to the Dealer by the Dealer’s Distributor from which Interlogix
time period for the type of return sought. If the purchase products were purchased or from Interlogix, in the event of direct
time period cannot be validated for a return subject to a purchases from Interlogix, in advance of receiving the returned
time limit, no RMA will be provided, and the return will product from the Dealer, for a select group of products as listed in
be declined.) Table 2 below (“Advance Replacement”). For the product
• New PO number (required for repair requests) participating in the Advance Replacement program the following
• Part number guidelines apply:
• Serial number (when applicable)
• Reason for return (capture in RMA form) No returns for Advance Replacement will be accepted unless you
• Tech Support Case Number have obtained an RMA number and you have obtained a Tech
Support Case Number as described in the section entitled
Customer Service will provide you with an RMA number and an “Returning Interlogix products” above or in the Return &
enhanced RMA acknowledgment form that confirms your request. Warranty Policy for Distributors, if applicable. Advance
Replacement products will be replaced with refurbished,
Once you have the RMA, repackage the product as described in the remanufactured or new products at Interlogix’s sole discretion and
section entitled “Packaging your shipment” and attach the RMA carry a full original equipment warranty. Interlogix may send
Return location address and bar code section from the RMA Advance Replacement product to replace defective equipment that
acknowledgement to the outside of the package. has failed upon initial install for up to 365 days. Advance
All products must be returned freight prepaid within 30 days of Replacements will ship via ground the next business day.
obtaining an RMA. An RMA may be cancelled after 30 days, in Our repair department will evaluate the returned product to
which case a new RMA must be obtained. determine whether it is a warranty or non-warranty replacement
We will not accept unauthorized returns or freight collect /COD and bill you accordingly. We will invoice Advance Replacements
returns; we will return these to you at your expense. at shipment and credit you upon receipt of the defective product;
If a returned product contains parts that are no longer available or provided, however, that if we determine that the returned product is
repairable, we will contact you to discuss resolution and return of in good working order or that performance issues were due to
the material. improper installation, misuse, abuse, or other user-related causes,
we will issue no credit and you will remain responsible for paying
The repair department will evaluate all equipment returned to the invoice, and we will return such product to you at your
determine warranty coverage and will resolve any questions that expense. If the defective product is part of a kit, you shall return
may arise during evaluation to make a final determination. only the defective product (i.e., you shall not return the remainder
Note: The dealer return and warranty policy is different from the of the kit) and we will replace only the defective product through
Distributor return and warranty policy. Advance Replacement. If the product was purchased or exchanged
at a Distributor and no Tech Support Case Number was provided at
time of exchange, no credit for the replacement unit already given
Customer Service to the Dealer will be issued to a Distributor.
Security Customer Service
Note: Advance replacement is not available for custom, special or
• Phone: 855.286.8889, Option 1
nonstandard products as determined in Interlogix’s sole discretion.
• Phone: 561.998.6114 (Latin America)
• E-mail: rma@interlogix.com
• E-mail: latam@interlogix.com (Latin America)
April 13, 2016
Table 2: Advanced Replacement Eligibility (in addition to All electronic components must be taped and/or contained in their
Standard Warranty) original electrostatic protective packaging or an equivalent
Product Advanced Participating Remark substitute.
Category Replacement SKU’s/Product
Eligible? Family All parts must be packed securely inside the external shipping
Access YES Pls see Table 4 carton to prevent mechanical or other damage.
Control
Fire NO Not Applicable Use External packaging must be sufficient to protect the contents from
Standard the usual hazards of shipping.
Warranty
Video and YES Pls see Table 3 Returned products should be addressed to the correct legal entity
Transmission name set forth in the RMA.
Intrusion YES Pls see Table 4 If products are being returned to Interlogix from outside of the
United States, the stated value of the returned products for customs
Voice NO Not Applicable Use
should be greater than zero, and typically should be equivalent to
Standard
the purchase price of the returned products. Further, the return of
Warranty
such products to Interlogix shall comply fully with the export
Other NO Not Applicable Use administration and control laws and regulations of the United States
Standard government and other applicable jurisdictions, and any amendments
Warranty of such laws and regulations.
The list of SKU’s eligible for Advanced Replacement in the
video & transmission and intrusion profiles are listed in Tables
3 and 4, respectively, at the end of this policy.
Refurbished B-stock Products

Interlogix occasionally offers select products for sale as B-stock—
units that have been used in the field and refurbished. B-stock
products are covered by different warranty conditions and
durations than new products. Refurbished products come with a
one-year limited warranty.
Credit Returns
No returns for credit or refund will be accepted unless you have
obtained a return material authorization as described in the section
entitled “Returning Interlogix products”. Interlogix will refund
or credit new, standard production items that are unused and in the
original unopened shipping cartons for a period of 120 days from
the original date of shipment; however any returned product is
subject to a 25% restocking fee if your request comes more than 60
days after the original ship date. Returns for refund or credit
beyond 120 days from original shipment date will be denied.
Products purchased as part of a kit must be returned in their
entirety (i.e., the entire kit must be returned, not separate parts) to
receive refund or credit. Refund or credit is not available for
custom, special or nonstandard products.
You must use credit within one year of the date of issue. All
returns are subject to Interlogix inspection and approval.
Packaging Your Shipment

Protecting the value of returned products by packaging and
shipping them correctly is your responsibility. The risk of loss for
products being returned to Interlogix remains with Dealer until
received by Interlogix at the Interlogix location designated in the
RMA. Dealer is responsible for compliance with all laws and
regulations related to shipping any products to Interlogix, including
without limitation laws and regulations related to the shipment of
regulated or hazardous materials, to the extent applicable. Dealer
agrees to indemnify Interlogix from all losses and liabilities to
Interlogix arising out of Dealer’s failure to comply with applicable
laws and regulations related to shipping. Interlogix reserves the
right to deny warranty coverage for any damage caused by failing to
meet the following packaging requirements:
April 13, 2016
Table 3: VIDEO Products TVB-3201 TVD-M5225V-4-P TVN-2116-2T

Eligible for Advanced TVB-3202 TVD-N210V-2-N TVN-2116-4T
Replacement (in addition TVC-1201 TVD-N210V-2-P TVN-2116-8T
to Standard Warranty) TVC-1202 TVD-N210W-4-N TVN-2116P-12T
Analog Cameras TVC-3201 TVD-N210W-4-P TVN-2116P-16T
TVB-1101 TVC-3202 TVD-N225E-2M-N TVN-2116P-2T
TVB-1102 TVC-M1220-1-N TVD-N245V-2-N TVN-2116P-4T
TVB-1103 TVC-M1220-1-P TVD-N245V-2-P TVN-2116P-8T
TVB-1104 TVC-M1245E-2M-N TVF-1101 TVN-2116S-16T
TVB-1105 TVC-M2220-1-N TVF-1102 TVN-2116S-2T
TVB-4101 TVC-M2220-1-P TVF-1103 TVN-2116S-4T
TVB-4102 TVC-M3220-1-N TVF-1104 TVN-2116S-8T
TVB-4103 TVC-M3220-1-P TVF-3101 TVN-2132P-12T
TVB-4104 TVC-M3245E-2M-N TVF-3102 TVN-2132P-16T
TVB-4105 TVC-M3245E-2M-P TVF-3103 TVN-2132P-4T
TVB-4201 TVC-M5220-1-N TVF-3104 TVN-2132P-8T
TVB-4202 TVC-M5220-1-P TVL-0102 TVN-5032-12T
TVB-4203 TVC-M5225E-3M-N TVL-0103 TVN-5032-16T
TVB-4401 TVC-M5225E-3M-P TVL-0104 TVN-5032-4T
TVB-4402 TVC-N220-1-N TVL-0105 TVN-5032-8T
TVB-4403 TVC-N220-1-P TVL-0106 TVR-1104C-1T
TVB-4404 TVC-N225E-2M-N TVL-0107 TVR-1104C-500
TVC-5120-1-N TVC-N240-1-N TVL-0108 TVR-1108-1T
TVC-5125BE-3-N TVC-N240-1-P TVL-0109 TVR-1108-2T
TVC-6110-1-N TVD-1201 TVL-0110 TVR-1108D-1T
TVC-6120-1-N TVD-1202 TVW-2101 TVR-1108D-2T
TVC-BIR6-HR TVD-1203 TVW-2102 TVR-1116-1T
TVC-BIR6-MR TVD-1204 TVW-2107 TVR-1116-2T
TVC-BIR6-SR TVD-1205 TVW-2108 TVR-1116-4T
TVD-1104 TVD-2101 TVW-2109 TVR-1116D-1T
TVD-4104 TVD-2102 TVW-3101 TVR-1116D-2T
TVD-4202 TVD-2103 TVW-3102 TVR-1204C-1T
TVD-4401 TVD-2104 TVW-3102 TVR-1204C-500
TVD-4402 TVD-3101 TVW-3107 TVR-1204CHD-1T
TVD-5110-3-N TVD-3104 TVW-3108 TVR-1204-KW1
TVD-5125TE-3-N TVD-3201 TVW-3109 TVR-1208-1T
TVD-6120VE-2-N TVD-3202 TVW-3109 TVR-1208-2T
TVD-6125VE-2-N TVD-3203 TVW-3120 TVR-1208HD-1T
TVD-DOME6-HR TVD-3204 Digital Recording TVR-1208HD-2T
TVD-TIR6-HR TVD-3205 TVN-1004CS-1T TVR-1208HD-4T
TVD-TIR6-MR TVD-M1210V-2-N TVN-1004CS-2T TVR-1208HD-8T
TVD-TIR6-SR TVD-M1210W-2-N TVN-1004CS-PS TVR-1208-KW1
TVT-1101 TVD-M1210W-2-P TVN-1004-KB1 TVR-1216-1T
TVT-1102 TVD-M1210W-2W-N TVN-1004-KW1 TVR-1216HD-1T
TVT-1103 TVD-M1210W-2W-P TVN-1008-KB1 TVR-1216HD-2T
TVT-4101 TVD-M1225V-2-N TVN-1008-KW1 TVR-1216HD-4T
TVT-4102 TVD-M1225V-2-P TVN-1008S-2T TVR-1216HD-8T
TVT-4103 TVD-M1245E-2M-N TVN-1008S-4T TVR-4408HD-12T
TVT-4201 TVD-M2210V-2-N TVN-10162-6T TVR-4408HD-2T
TVT-4202 TVD-M2210V-2-P TVN-1016S-3T TVR-4408HD-4T
TVW-1101 TVD-M2210W-4-N TVN-1016S-6T TVR-4408HD-8T
TVW-4101 TVD-M2210W-4-P TVN-2008-2T TVR-4416HD-16T
IP Cameras TVD-M2225V-2-N TVN-2008-4T TVR-4416HD-2T
TVA-1101 TVD-M2225V-2-P TVN-2008-8T TVR-4416HD-4T
TVA-3101 TVD-M3210V-2-N TVN-2016-16T TVR-4416HD-8T
TVB-1103 TVD-M3210V-2-P TVN-2016-4T IP Encoders/Decoders
TVB-1104 TVD-M3225V-2-N TVN-2016-8T TVE-110
TVB-1201 TVD-M3225V-2-P TVN-2108-2T TVE-410
TVB-1202 TVD-M3245E-2M-N TVN-2108-4T TVE-810
TVB-1203 TVD-M3245E-2M-P TVN-2108-8T TVE-1610
TVB-3103 TVD-M5225E-3M-N TVN-2108S-2T TVE-DEC11
TVB-3104 TVD-M5225E-3M-P TVN-2108S-4T
TVB-3105 TVD-M5225V-4-N TVN-2108S-8T
April 13, 2016
Table 4: INTRUSION 120-3620E 430084502-CR
Products Eligible for 120-3625E 430085001
Advanced Replacement (in
120-3652F 430085501
addition to Standard
Warranty) 120-3654F 430085502
4GFXS 120-4081 430088001
4GFXSG 120-5005 430088002
4GFXSP 120-5007 430088501
4GFXU1 120-5016 430088502
4GSTS 120-5020 430177001
4GSTSG 120-5022 430210001
4GSTSP 120-6301D 430210002
4GSTU1H 120-6301E 430210003
16-3260 120-6301S 430210004
100-5420B 120-6302C 430210005
100-5420G 120-6302E 430210006
100-5420W 120-6302F 430211001
100-5421B 120-6303C 430211002
100-5421G 120-6303D 430211003
100-5423G 120-6303E 430211004
100-5424B 120-6306E 430211005
100-5424G 120-6320 430211006
100-5424W 120-6325 430212006
120-0850 120-8150 430220001
120-0851 120-8152 430221001
120-0860 120-8206 430228001
120-0861 120-8209 430228501
120-2720E 120-8216 430237001
120-2720F 120-8217 430241006
120-3400 120-8218 430242006
120-3401 120-8220B 430242501
120-3402 120-8220G 430267001
120-3403 120-8220W 520836001-CR
120-3404 120-8221G 520845001
120-3405 120-8224B 520847001
120-3406 120-8224G 520848001
120-3407 120-8224W 520849001
120-3600-CP01 120-8226 520850001
120-3601D 120-8953 520851001
120-3601 E 120-9261 520852001
120-3601F 120-9265 521209001
120-3601S 120-9410 521209002
120-3602C 120-9412 521209003
120-3602E 120-9415 521210001
120-3602S 120-9429 521210002
120-3603D 120-9882N 521210003
120-3603E 2707AD-L5 521211001
120-3603F 2757D-L 521211002
120-3603S 420613001 521211003
120-3605-CP01 420214006
120-3605E 430062001
120-3606-CP01 430084001-CR
120-3606E 430084002-CR
120-3606S 430084501-CR
2
EQUIPMENT DATA
SHEETS

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
Video Surveillance
HD-TVI Analog
Dome Cameras
720p and 1080p
Resolution Cameras
1080P 960H IR OSD

FULL HD Illumination On Screen Display
IP66
IK10
OVERVIEW STANDARD FEATURES

The TruVision® HD-TVI Dome Camera by Interlogix delivers cost Video
effective surveillance with high resolution HD-TVI technology • 720p or 1080p HD resolution options
and up to 1080p image quality over existing coaxial cable. This • 960H CVBS output on select models
camera also has the ability to see in low-light conditions providing
• Fixed, varifocal and motorized lens options
color images by day and black-and-white images in night-time
• HD-TVI technology for transmitting HD quality video over
applications (in conjunction with IR illumination). Along with
existing coax cable
an IP66 rating for outdoor installation, select models are also
• HD-TVI and 960H CVBS dual output on select models
available with an IK10 vandal rated enclosure. With quick and
easy installation, the HD-TVI Dome Camera is ideal for new or Video Enhancements
existing projects and helps users stay within budget constraints
• 720p models provide DWDR
without compromising security needs.
• 1080p models provide True WDR (120 dB)
• True day/night functionality and infrared illuminators with
Smart IR function for capturing images in various lighting
scenarios
Installation and Environment

• IP66 Environmental rating
• IK10 vandal rating on select dome models
• OSD control on select models – TruVision coax
and built-in menu button
• Cable protection/management
• Multiple mounting options
Warranty
• 3-year warranty
interlogix.com/truvision
Specifications
720p HD-TVI 1080p HD-TVI
TVD-4401 TVD-4402 TVD-4403 TVD-4404 TVD-4405
TVD-2401 TVD-2402 TVD-2403 TVD-2404 TVD-2405
Image Sensor 1/3" CMOS

Standard HD-TVI
Signal System NTSC/PAL
Resolution 720p 1080p
Effective Pixels 1280 (H) x 720 (V) 1920 (H) x 1080 (V)
Synchronization Internal
Day/Night IR cut filter with auto switch
Wide Dynamic Range DWDR 120 dB WDR available on HD-TVI output only (If WDR is enabled, then the 960H output is disabled)
Electronic Shutter NTSC: 1/30 s to 1/50,000 s; PAL: 1/25 s to 1/50,000 s
Camera
Minimum Illumination Color: 0.01 lux @ f1.2 (AGC On); B/W: 0.001 lux @ f1.2 (AGC On); 0 lux with IR On
Digital S/N Ratio 52 dB (AGC Off)
Lens 2.8mm @ f2.2 2.8~12mm @ f1.4 2.8mm @ f2.2 2.8~12mm @ f1.4 2.8-12mm @ f1.4 motorized
IR Range 66 ft. (20m) 132 ft. (40m) 66 ft. (20m) 132 ft. (40m)
OSD button; TruVision Coax TruVision Coax OSD control
OSD button; TruVision Coax OSD control on TVI; TruVision Coax
On Screen Display (OSD) N/A OSD control on TVI; TruVision on TVI; TruVision Coax OSD
OSD control on 960H
Coax OSD control on 960H control on 960H
English, Japanese, Chinese, Korean, German, French, Italian, Spanish, Polish, Russian,
OSD Languages N/A English and Chinese
Portuguese, Dutch, Turkish, Hebrew and Arabic
Video Output HD-TVI Dual output: TVI and 960H Composite (when WDR is enabled, 960H output will be disabled)
Video Connector 1 - 75Ω / BNC @ TVI 1 - 75Ω / BNC @ HD-TVI; 1 - 75Ω / BNC @ 960H
Voltage Input 12VDC 12VDC/24VAC 12VDC 12VDC/24VAC
12VDC: 300 mA (Max.) 12VDC: 375 mA (Max.) 12VDC: 1 A (Max.)
Current 300 mA 300 mA
24VAC: 210 mA (Max.) 24VAC: 270 mA (Max.) 24VAC: 500 mA (Max.)
Electrical/Mechanical
12VDC: 3.5W (Max.) 12VDC: 4.5W (Max.)

Power Consumption 3W (Max.) 4W (Max.) 12W (Max.)
24VAC: 5W (Max.) 24VAC: 6.5W (Max.)
5.72 × 4.89 in. (145.3 ×
Dimensions 4.4 × 3.2 in. (111 × 82mm) 4.4 × 3.2 in. (111 × 82mm) 5.72 × 4.89 in. (145.3 × 124.2mm)
124.2mm)
Without back box: 1.41 lbs.
(641g) Without back box: 1.41 lbs. (641g)
Weight 0.761 lbs. (345g) 0.761 lbs. (345g)
With back box: 2.05 lbs. With back box: 2.05 lbs. (932g)
(932g)
12VDC: -22°F~140°F (-30°C~ 12VDC: -22°F~140°F (-30°C~ 12VDC: -22°F~140°F (-30°C~
Operating Temperature 12VDC: -22°F~140°F (-30°C~ 60°C); 12VDC: -22°F~140°F (-30°C~ 60°C); 60°C);
(cold start) 60°C) 24VAC: -40°F~140°F (-40°C~ 60°C) 24VAC: -22°F~140°F (-30°C~ 24VAC: -40°F~140°F (-40°C~
Environmental
60°C) with heater on 60°C) with heater on 60°C) with heater on

Humidity
< 90%
(non-condensing)
Environmental Rating IP66
Vandal Rating N/A IK10 N/A IK10

Regulation
Compliance FCC, CE, UL, RCM, REACH, RoHS, WEEE

Dimensional Diagrams
TVD-4401, TVD-2401, TVD-4403, TVD-2403 Fixed Lens Dome
Ø111
Ø100.4
(82.4 mm)
3.24 in.
3.11 in.
(79.1 mm)
TVD-4402, TVD-2402, TVD-4404, TVD-2404, TVD-4405, TVD-2405 Dome
1.8 in.
Ø1 (46 mm)
00
.4
(124.1 mm)
4.9 in.
1.8 in. 3.3 in.

(46 mm) (83.5 mm)
3.3 in.
(83.5 mm)
HD-TVI Analog Dome Cameras
720p and 1080p Resolution Cameras
Ordering Information Accessories

NTSC Adapter for TruVision Wedge or Plastic Dome to
DR-RWM-AD
DR-RWM or TVD-M2-WM Wall Mounts
TruVision® HD-TVI Analog Dome Camera, 720p, 2.8mm Lens, True
TVD-4401 TVD-BB1 TruVision Dome Back Box (use w/Plastic Dome)
D/N, DWDR, 20m IR, HD-TVI Output, 12VDC, IP66, Plastic, NTSC
TruVision HD-TVI Analog Dome Camera, 720p, 2.8~12mm VF Lens, TruVision Dome Back Box (use w/TVD-6/-7
True D/N, DWDR, 40m IR, 960H Monitor or HD-TVI Selectable TVD-BB3 Series Analog Dome, IP Indoor VF Domes, IP
TVD-4402 Outdoor Domes)
Output, Coax & Button OSD Control, 12VDC/24VAC, IP66, IK10,
NTSC TruVision Dome Angled Back Box (use w/TVD-
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8mm Lens, True TVD-BB3A 6/-7 Series Analog Dome, IP Indoor VF Domes,
TVD-4403 D/N, WDR, 20m IR, 960H Monitor & HD-TVI Dual-output, Coax OSD IP Outdoor Domes)
Control, 12VDC, IP66, Plastic, NTSC TVD-CB3 TruVision Dome 3" Cup Base
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8~12mm VF TruVision TVD-LWB Wall Mount Bracket Adapter
TVD-4404 Lens, True D/N, WDR, 40m IR, 960H Monitor & HD-TVI Dual-output, TVD-LWB-AD
Plate for TVD-SNB-BB Back Box
Coax & Button OSD Control, 12VDC/24VAC, IP66, IK10, NTSC
TruVision Dome Bracket, L-Shape. Indoor (use
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8~12mm TVD-LWB-1 w/TVW Analog/IP Wedge and HD-TVI/IP Fixed
Motorized VF Lens, True D/N, WDR, 40m IR, 960H Monitor & HD-TVI Lens Dome Cameras)
TVD-4405
Dual-output, Coax & Button OSD Control, 12VDC/24VAC, IP66,
IK10, NTSC TruVision Dome Bracket, L-Shape. Indoor
TVD-LWB-2 (use w/TVW Analog/IP Wedge and HD-TVI/IP
PAL Motorized Lens Outdoor Domes)
TruVision HD-TVI Analog Dome Camera, 720p, 2.8mm Lens, True TruVision Dome Wall Mount (use w/TVD Analog/
TVD-2401
D/N, DWDR, 20m IR, HD-TVI Output, 12VDC, IP66, Plastic, PAL TVD-M2-WM HD-TVI/IP VF Domes; Fixed Lens HD-TVI/IP
TruVision HD-TVI Analog Dome Camera, 720p, 2.8~12mm VF Lens, Domes and IP Wedge via DR-RWM-AD)
True D/N, DWDR, 40m IR, 960H Monitor or HD-TVI Selectable TruVision Dome Pendant-Mount Bracket (use w/
TVD-2402 TVD-PPB
Output, Coax & Button OSD Control, 12VDC/24VAC, IP66, IK10, TVD-CB2, TVD-CB3, TVD-CB5A, TVW-DVM)
PAL
TruVision Dome Swan Neck Bracket (use w/
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8mm Lens, True TVD-SNB
TVD-CB2, TVD-CB3, TVD-CB5A, TVW-DVM)
TVD-2403 D/N, WDR, 20m IR, 960H Monitor & HD-TVI Dual-output, Coax OSD
Control, 12VDC, IP66, Plastic, PAL TruVision TVD-SNB Back Box, 4-directional
TVD-SNB-BB
Conduit, Indoor & Outdoor
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8~12mm VF
TVD-2404 Lens, True D/N, WDR, 40m IR, 960H Monitor & HD-TVI Dual-output,
Coax & Button OSD Control, 12VDC/24VAC, IP66, IK10, PAL
TruVision HD-TVI Analog Dome Camera, 1080p, 2.8~12mm
Motorized VF Lens, True D/N, WDR, 40m IR, 960H Monitor & HD-TVI
TVD-2405
Dual-output, Coax & Button OSD Control, 12VDC/24VAC, IP66,
IK10, PAL
interlogix.com
Specifications subject to change without notice.
© 2016 United Technologies Corporation.
All rights reserved.
All trademarks are the property of their respective owners.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
2016/06 (LI-1673)
TruVision Dome Brackets
Installation Manual
P/N 1072649B-EN • REV 1.0 • ISS 30SEP13

Copyright © 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security, a unit of United Technologies Corporation. All rights
reserved.
Trademarks and patents The TruVision name and logo are trademarks of United Technologies.
Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or
vendors of the respective products.
Certification
N4131
2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
Contact information For contact information, see www.utcfireandsecurity.com or www.utcfssecurityproducts.eu.

Content
Introduction 2
Bracket and cup base descriptions 2
Wall-mount installation (TVD-SNB and TVD-M2-WM) 4

5-inch dome cameras 4
2-inch dome wedge cameras 7
Flush-mount installation (TVD-M2-FM) 8

5-inch dome indoor cameras 8
Pendant-mount installation (TVD-PPB) 10

2-inch dome wedge cameras 12
Pole-mount installation (TVD-M-PMA) 13
Specifications 14
Pipe threading information 15
Overview: Fixed dome cameras by bracket 16
TruVision Dome Brackets Installation Manual 1

Introduction
These are the installation instructions for the TruVision series of dome brackets and cup bases.
The series brackets and cup bases are compatible with both indoor and outdoor Interlogix cameras
Models
For a list of the brackets and cup bases with their corresponding cameras, see “Overview: Fixed
dome cameras by bracket” on page on page 16.
Packet contents
The package contains the following items:
• Bracket or cup base
• Accessories for installation
• Screws
Unpacking
Please check the package contents to ensure that all parts are present and in good condition.
Note: For safety purposes, the mounting surface must be able to support three times the combined
weight of the bracket, cup base, and camera.
Bracket and cup base descriptions

TruVision dome swan-neck bracket (TVD-SNB) OUTDOOR
TruVision dome pendant-mount ceiling bracket (TVD-PPB)
Mounting plate
Tube
2 TruVision Dome Brackets Installation Manual

TruVision flush-mount bracket (TVD-M2-FM)
TruVision pole-mount adaptor (TVD-M-PMA)
TruVision indoor dome wall-mount bracket (TVD-M2-WM)
TruVision dome cup bases

• TVD-CB5:
Note: The rubber ring for TVD-CB5 is pre-installed in the cup base.
• TVD-CB5A:
Note: The rubber ring for TVD-CB5A is pre-installed in the cup base.

• TVD-CB3: OUTDOOR
• TVD-CB2:
Converter pan
(TVD-M2 WEBM)
Accessories
Screw Ø 4 mm (2 Expansion screw Screw Ø 4 mm Locking screw Ø 4 mm Black screw Ø 4 mm

pieces) Ø 10 mm (5 pieces) (4 pieces) (2 pieces) (4 pieces)
Wall-mount installation (TVD-SNB and TVD-M2-

WM)
Check the section “Overview: Fixed dome cameras by bracket” on page 16 to confirm that the
correct bracket is used with the camera.
5-inch dome cameras

Use the TVD-SNB bracket and the TVD-CB5/TVD-CB5A cup base. See “Bracket and cup base
description” on page 2 for examples of the assembled brackets.
To mount a swan-neck bracket on a wall:

1. Pull the camera cables through the bracket tube
and then attach the swan-neck bracket to the
wall with the expansion screws (A) provided.

3-inch dome cameras
Use the TVD-SNB bracket with the TVD-CB3 cup base or TVD-M2-WM bracket. See “Bracket and
cup base description” on page 2 for examples of the assembled brackets.
To mount a swan-neck bracket on a wall: OUTDOOR

1. Pull the camera cables through the TVD-SNB
bracket tube and then attach the swan-neck
bracket to the wall with the expansion screws (A)
provided.
2. Screw the cup base onto the swan-neck bracket

and fasten with the locking screw, as shown (A).
Then attach the mounting plate (B) to the cup
base.
Note: The mounting plate is shipped with the
dome camera.
3. Loosen the screws on the dome enclosure using
hex wrench, and remove the dome enclosure
and the liner.
4. Connect the cables to the dome camera.

5. Using the enclosed screws, attach the dome
module of the camera (A) to the bracket.
Then re-attach the dome liner and enclosure (B).
6. Re-attach the dome enclosure to the camera.

INDOOR ONLY
To mount an indoor wall-mount bracket:
1. Pull the camera cables through the TVD-M2-WM
bracket tube and then attach the bracket to the
2. Attach the mounting plate to the bracket.

Note: The mounting plate is shipped with the
dome camera.
3. Loosen the screws on the dome enclosure using

the supplied hex wrench and remove the dome
enclosure and liner from the dome module.
4. Connect the cables to the dome camera.
5. Using the enclosed screws, attach the dome

module of the camera to the bracket.
6. Re-attach the dome liner and enclosure to the

camera.
2-inch dome wedge cameras

Use the TVD-SNB bracket and the TVD-CB2 cup base. See “Bracket and cup base description” on
page 2 for examples of the assembled brackets.
To mount a swan-neck bracket on a wall:

1. Pull the camera cables through the bracket tube
and then attach the swan-neck bracket to the
2. Using four screws, attach the converter pan

(TVD-M2 WEBM) to the cup base.

Camera Mount Selection Guide
Std. 2
Gang
Back Elec. Flush
Box Box Mount Wall Mount OUTDOOR INDOOR Pendant Mount
TVD- TVD- TVD- TVW- TVW- DR TVD-SNB TVD-M2-WM TVD-PPB

M2-FM LWB-1 LWB-2 AWB-1 AWB-2 Series (1, 9, 10) (1, 9, 10)
DR-
RWM
Mounting
Brackets
TVW- TVW- TVD- TVD- TVD- TVF- TVW- TVW- TVD- TVD- TVD- TVF-
AWB-1 DVM CB2 CB3 CB5A CBM AWB-1 DVM CB2 CB3 CB5A CBM
Threaded Pipe
Mounts
Cat. SKU
TVD-
M5225E- Incl.
3M-N
TVD-3101 2 7 7
TVD-3102 2 7 7
TVD-3103 3, 4
TVD-3104 3, 4
TVD-3105 2 7 7
TVD-3106 2 7 7
TVD-3201 3, 4
TVD-3202 3, 4
TVD-3203 Incl.
TVD-3204 Incl.
TVD-3205 Incl.
TVF-3101 5, 6
TVF-3102 5, 6
IP
TVF-3103 5, 6
TVF-3104 5, 6
TVW-3101 3+7 8 7 7
TVW-3102 3+7 8 7 7
TVW-3103 3+7 8 7 7
TVW-3104 3+7 8 7 7
TVW-3105 3+7 8 7 7
TVW-3106 3+7 8 7 7
TVW-3107 3+7 8 7 7
TVW-3108 3+7 8 7 7
TVW-3109 3+7 8 7 7
TVW-3116 3+7 8 7 7
TVW-3117 3+7 8 7 7
TVW-3118 3+7 8 7 7
TVW-3119
TVW-3130 3+7 8 7 7
TVD-4202 Incl.
TVD-4401 2 7 7
Analog
TVD-4402 Incl.
TVD-4403 2 7 7
TVD-4404 Incl.
TVW-4101 3+7 8 7 7
Back Boxes, Adaptors, Corner and Pole Mounts

4.60 in.
(Ø117mm)
Wall/Ceiling Mount Adaptors Corner/Pole Mount
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
TVD-SNB-BB TVD-BB1 TVD-BB3 TVD-BB3A TVF-BBM TVF-WBM DR-RWM-AD TVW-2G-AD TVD-M-CMA TVD-M-PMA
Wall Mount Dome Back Box Dome Back Box Dome Angled 360 Back Box 360 Angled Back Dome/Wedge 2 Gang Electrical Corner Mount Pole Mount
Back Box Back Box Box Adapter Plate Box Adapter 7.63 in.
(194mm)
ALTV2416300UL, ALTV2416300ULCB
UL Listed AC CCTV Power Supply
Rev. DSALTV2416300UL - E26I
Overview
These Altronix AC Wall Mount CCTV Power Supplies provide 24VAC or 28VAC
distributed via sixteen (16) fuse or Class 2 Rated PTC protected power limited
outputs for powering CCTV Cameras, heaters and other video accessories.
Specifications
• Input 115VAC, 50/60Hz, 2.7 amp. • AC power LED.
• 24VAC @ 12.5 amp (300VA) or • Spare fuse(s) provided
28VAC @ 10 amp (280VA) supply current. (all models w/primary and/or secondary fuses).
• Main fuse rated @ 10 amp/250V. • Unit maintains camera synchronization.
• Illuminated power disconnect circuit breaker • Ease of installation saves time and
with manual reset. eliminates costly labor.
• Surge suppression.
Models
ALTV2416300UL ALTV2416300ULCB
• Sixteen (16) fuse protected outputs. • Sixteen (16) Class 2 Rated PTC protected
• Outputs are rated @ 3.5 amp. power limited outputs.
ALTV2416300UL3 • Outputs are rated @ 2.5 amp.
ALTV2416300UL w/3-wire Line Cord. ALTV2416300ULCB3
ALTV2416300ULCB w/3-wire Line Cord.
Agency Approvals
UL Listed for Commercial CCTV Equipment
European Conformity
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-98,

Audio, Video and Similar Equipment.
Enclosure Dimensions
13.5"H x 13"W x 3.25"D
1.40" 4.85" 4.85" 1.40"
1.20"
3.25"
Top
12.50"
1.20" 1.20"
0.75" 11.00" 0.75"
0.9375"
1.40" 1.40"
5.10" 5.10"
Left Right
5.10"
6.5625"
0.9375"
3.25" 3.25"
Bottom
3.25"
1.00" 1.00"
1.00" 10.50" 1.00"
Shipping Weights (approximate):

- ALTV2416300UL: 17.1 lbs. - ALTV2416300UL3: 18.1 lbs.
- ALTV2416300ULCB: 17.1 lbs. - ALTV2416300ULCB3: 18.1 lbs.
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Premise Connectivity Systems
BNC Feed-Thru Patch Panels
SPECIFICATIONS
Signamax BNC-style feed-thru connector patch panels may be used with a number of telecommunications applications –
networking, video and audio distribution, VHF equipment, test and measurement, etc. Based on 50- or 75-Ohm BNC
feed-thru keystone-type modules, these panels provide high-quality standard-compliant connections to active equip-
ment or cross-connections between cabling segments. Two panel density designs, “standard-density” and “high-density”
provide flexibility in managing access and cable entry space. Easy field-configuration of Signamax multimedia panels al-
lows quick replacement of individual modules during reconfigurations and upgrades. Available in 12-, 16-, 24-, 32-, and
48-port sized in standard-density design and in 24- and 48-port sizes in high-density design.
KEY FEATURES
• 50- and 75-Ohm feed-thru versions • Field configurable
• Standard-density – 12-, 16-, 24-, 32-, and 48-port sizes • Maximum strength and durability construction
• High-density – 24- and 48-port sizes • Snap-in rear cable management bar (high-density de-
sign only)
ORDERING INFORMATION
Standard-Density BNC Feed-Thru Patch Panels
Part Number Description

12BNC-FT 12-Port 50-Ohm BNC Feed-Thru Patch Panel, 1.75-in (1-RMS) High
12BNC75-FT 12-Port 75-Ohm BNC Feed-Thru Patch Panel, 1.75-in (1-RMS) High
High-Density BNC Feed-Thru Patch Panels

24BNCHD-FT 24-Port 50-Ohm BNC High-Density Feed-Thru Patch Panel, 1.75-in (1-RMS) High
48BNCHD-FT 48-Port 50-Ohm BNC High-Density Feed-Thru Patch Panel, 3.50-in (2-RMS) High
24BNCHD75-FT 24-Port 75-Ohm BNC High-Density Feed-Thru Patch Panel, 1.75-in (1-RMS) High
48BNCHD75-FT 48-Port 75-Ohm BNC High-Density Feed-Thru Patch Panel, 3.50-in (2-RMS) High
www.signamax.com
16295 N.W. 13th Avenue, Suite A Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483
Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change PSS.BNC-FT-PP A-APR-11
Premise Connectivity Systems
BNC Feed-Thru Patch Panels
SPECIFICATIONS
SPECIFICATIONS
• TRANSMISSION PERFORMANCE
Bandwidth: 50-Ohm: 0-4 GHz
75-Ohm: 0-2 GHz
• TRANSMISSION MEDIA
Coaxial cable
• ELECTRICAL
Characteristic impedance: 50 Ohm
75 Ohm
Operating voltage: < 500 V
• MECHANICAL
Diameter: 11.1 mm (0.436 in), outer, typical
• CONSTRUCTION
Panel: standard-density: body: steel
high-density: body: steel/Ni plated steel
cable management bar: steel/plastic
• DIMENSIONS
19-in rack mountable:
standard-density:
12-port: W 482.60 mm (19.000 in) H 44.45 mm (1.75 in) 1 RMS
24-port W 482.60 mm (19.000 in) H 88.90 mm (3.50 in) 2 RMS
high-density:
• ENVIRONMENTAL CONDITIONS
Storage temperature: -40 °C – +68 °C (-40 °F – 154 °F)
Operating temperature: -10 °C – +60 °C (-14 °F – 140 °F)
Humidity: 10 %–90 % RH
• COMPLIANCE
UL 94V-0
• WARRANTY
5-year limited component warranty
RELATED PRODUCTS
Product/Product Group Spec Sheet #

Unloaded High-Density Multimedia Patch Panels PSS.U-HD-MM-PP (A-OCT-08)
Unloaded Standard-Density Multimedia Patch Panels NA
Keystone Multimedia Modules PSS.KMM (B-AUG-08)
www.signamax.com
16295 N.W. 13th Avenue, Suite A Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483
Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change PSS.BNC-FT-PP A-APR-11
611/2015 Hinged Wall Mount Brackets 1 Signamax Connectivity Systems
!~~~~YSTE~
Hinged Wall Mount Brackets
Overview
OVERVIEW
Hinged Wall Mount Brackets are designed for mounting one or more 19-inch panels and have a 6-inc h standoff depth. Brackets are constr ucted
from 16-gauge steel with a black polyurethane finish. Brackets have cable access holes on both the rear and sides of the brackets to allow a
variety of cable access configurations. Brackets can be mounted for either right or left hand swing.
Key Features
KEY FEATURES
• 19-inch rack mount standard
• EIA standard-spaced 10-32 holes
• 1-2-3-4-5 RMS
• 6-inch standoff depth
• Cable access holes on both the rear and sides
• Right or left hand swing
• 16-gauge steel with a black polyurethane finish
Specifications
SPECIFICATIONS
Information will be available soon.
Downloads
DOWNLOADS
http://www.signamax.com/support-structures/161- hinged-wall- mount-brackets?tm pi =component&print= 1&page= 1/2

611/2015 Hinged Wall Mount Brackets 1Signamax Connectivity Systems
Information will be available soon.
Ordering Information
ORDERING INFORMATION
I Where to Buy I
HWB-175 1-RMS Hinged Wall Mount Bracket. 1. 75"H x 6"0

---------------------------------------
HWB-350 2-RMS Hinged Wall Mount Bracket, 3.50"H x 6"0
HWB-700 4-RMS Hinged Wall Mount Bracket. 7.00"H x 6"0

--- - -- ------------------------·- --
Copyright© 2013 Signamax Connectivity Systems . All Rights Reserved.

999 NW 159TH DR I Miami, FL 33169 I Phone : 305-944-7710 I Fa x: 305-949-4483
Customer Service : 800-446-2377 - Options 3 then 4

Technical Support: 800-446-2377- Options 3 then 5
http://www.signamax.com/support-structures/161-hinged-wall-mount-brackets?tm pi= component&print= 1&page= 212

Security CCTV Accessories
CCTV - Cable Assemblies RG59/U Security Cable Assemblies

Catalog No. Length (ft.) BNC to BNC
Replace xx with:
CN-7B815BK-xx
3,6,10,15,20,25
CCTV - Cable Assemblies MiniMax 25AWG

Catalog No. Length Jacket Colors
CN-7B825**-3 3 Foot
CN-7B825**-6 6 Foot **- Jacket Colors
CN-7B825**-10 10 Foot Black-BK, Blue-BL, Red-RD,
CN-7B825**-15 15 Foot Yellow-YE,
CN-7B825**-20 20 Foot Green-GN, White-WH
CN-7B825**-25 25 Foot
CCTV - Cable Assemblies Plenum MiniMax 25AWG

Catalog No. Length Jacket Colors
CN-7B25825**-3 3 Foot
CN-7B25825**-6 6 Foot **- Jacket Colors
CN-7B25825**-10 10 Foot Black-BK, Blue-BL, Red-RD,
CN-7B25825**-15 15 Foot Yellow-YE,
CN-7B25825**-20 20 Foot Green-GN, White-WH
800-245-4964 • www.westpenn-wpw.com
CN-7B25825**-25 25 Foot
Security Accessories
75 Ohm BNC Compression Style 75 Ohm BNC Compression Style
Catalog No. Description
CN-CSBNC-25 Multi-Piece Miniature 25Awg. 825
CN-CSBNC-59 1 Pc. RG59/U PVC
CN-FS59BNCPL4 1 Pc. RG59/U Plenum
CN-CSBNC-6 1 Pc. RG6/U PVC
CN-CSBNC-25 CN-CSBNC-59 CN-FS6BNCPL2 1 Pc. RG6/U Plenum
CN-CSBNC-11 RG11/U - Use TL-CSBNC-11 Tool
CN-BNCP-RGB
75 Ohm BNC Compression Style- Window
Smaller CN-BNCP-RGB 1 Pc. Miniature 25Awg. RGB- Window
Profile CN-BNCP-825 1 Pc. MiniMax 25Awg. 825 -Window
Compression CN-BNCP-59 1 Pc. RG59/U Window
Design CN-BNCP-6 1 Pc. RG6/U Window
Security Accessories
75 Ohm BNC Crimp Style Colored Rings are available- See page 110
75 Ohm BNC Crimp Style

Catalog No. Description
CN-BM74-19 4 Pc.Miniature RGBHV
CN-BM74-18 4 Pc Minimax Miniature
CN-BM74-32 4 Pc RG59/U PVC or Plenum 3 Pc. 75 Ohm BNC
CN-BM73-5 3 Pc RG6/U PVC
CN-BM73-4 3 Pc RG6/U Plenum
CN-BM73-3 3 Pc P806 Connector
CN-BF74-18 4 Pc Female Minimax Miniature
WEST PENN WIRE CABLE WITH CONFIDENCE 85

DTK-PVP Series
Fixed Cam era Surge P rotector
General P roduct Specifications
DITEK’s PVP27B protects all the sensitive feeds to

fixed cameras, not just the video cable. Simple to
install, the PVP27B series protects 24 Volt power
conductors and video conductors in one compact
package. With the lowest video let through voltage
(and best surge protection) on the market, the
PVP27B provides ideal surge protection for today’s
sensitive, high-quality fixed cameras. Models are
available for Coax and Twisted Pair video
connections.
DTK-PVP27BTPV
DTK-PVP27B
DTK-PVP27B DTK-PVP27BTPV
Product Features
• Protects power and video conductors in one package

• 3 Amp, 24V circuit protects power feeds to camera,
heater, blower, defroster
• 0.2 Amp circuit protects data and video
• Multi-stage, SAD technology, hybrid design provides the
best possible protection
• Single point ground improves protection and speeds
installation
• Protect standard Coax or Twisted Pair video connections
• Ten Year Limited Warranty
One DITEK Center 1-800-753-2345 Direct: 1-727-812-5000 Document: SPS-100062-001 Rev 8 09/14
1720 Starkey Road Technical Support: 1-888-472-6100 ©2014 DITEK Corp.
Largo, FL 33771 www.ditekcorp.com Specification Subject to Change
DTK-PVP Series
Fixed Cam era Surge P rotector
General P roduct Specifications
Specifications:
DTK-PVP27B DTK-PVP27BTPV
Agency Approvals: UL497B N/A
Coax Connected Twisted Pair Video

Application:
Camera Camera
#22 - #14 AWG Screw

Connection Method (Video): BNC
Terminals
Connection Method (Power/Data): #22 - #14 AWG Screw Terminals
Video Band Pass: 0Hz - 10MHz 0Hz - 2GHz
Impedance: 75 Ω n/a
Center - Shield Positive - G

Modes Protected (Video):
Shield - G Negative - G
Modes Protected (Power): All Lines to Ground
Service Voltage (Video): 2V peak - peak
Service Voltage (Power): 24V AC/DC
Max Continuous Current (Video): 0.2A
Max Continuous Current (Power): 3A
2.8VDC (C–S)
Clamping (Video): 6.8VDC
30V (C–G)
Clamping (Power): 50V
Center - Shield 10kA

(8/20µs)
Surge Current (Video): 114A/pair (10/100µs)
Shield - Ground 150A
(10/100µs)
Surge Current (Power): 2,000 Amps
Temperature Range: -40°F to 158°F (-40°C to 70°C)
Housing: ABS
3.86” x 2.09” x 1.37”

Dimensions: (98mm x 53mm x
35mm)
Weight: 2.56 ounces (73 grams)
One DITEK Center 1-800-753-2345 Direct: 1-727-812-5000 Document: SPS-100062-001 Rev 8 09/14
1720 Starkey Road Technical Support: 1-888-472-6100 ©2014 DITEK Corp.
Largo, FL 33771 www.ditekcorp.com Specification Subject to Change
VIDEOBALUNS
UNLIMITED BL3265
One Minute Presenting the Unsurpassed

EZ Connect
EZ-VU Tool-Less Video Balun
Slide off cover, Raise orange IDC

Connectors and Insert wires.
Model BL3265
Features
• No Tools Required • Installs in Less Than 1 Minute
• Transmits Video 2000 Feet or More* • No Wire Stripping Required
• No Need to Hassle with Screw Terminals • UL Listed for the U.S. and Canada
• Cabling Cost Savings up to 50%
Press/Click down IDC connectors The EZ-VU BL3265 allows the replacement of coaxial cable with ordinary unshielded
twisted pair (UTP) cable. This allows CCTV equipment to be installed using easy to use
and less expensive UTP cable.
The EZ-VU BL3265 incorporates a unique UTP connector which allows a rapid installation
with no tools required, not even wire strippers. The latest technology has been incorporated
in order to make installations as simple as possible.
The EZ-VU BL3265 is suitable for any application in which baseband video is transmitted in NTSC,
PAL or Secam formats such as CCTV cameras, monitors, multiplexers, switchers and DVR’s.
Reinstall Cover-Slide Closed Applications exist in the following areas:

• Commercial and Industrial Security
• Government, Military and Law Enforcement Applications
• Intelligent Transportation Systems (ITS)
• Casino Security and Surveillance Systems
• Airport Security Systems
* Distance will vary depending on cable quality
For more information, please contact:

Installation Complete
Ready to use in 1 minute or less
info@videobaluns.com
Tel: (508) 620-1002
VIDEOBALUNS
UNLIMITED BL3265
Monitor
Video 2000ft (610m) or more
Camera
Video Video
Balun Balun
Balun Balun
Balun Balun
Balun
Balun
Balun
Balun
15.8 mm 58.0 mm
0.625" 2.282"
21.0 mm
0.8125"
Specifications
Video Bandwidth DC to 6 MHz

Format NTSC, PAL, SECAM
Distance Using Cat 5 cable 2000 feet or more*
Wire Unshielded Twisted Pair Cat 2,3 5 or better
Gauge 22 to 28 solid wire
Impedance BNC Connector Side 75 ohms (unbalanced)
UTP Connector Side 100 ohms (balanced)
Environment Temperature -20 to +75 C
Humidity (non condensing) 0 to 95%
Mechanical Size (LxWxH in inches) 2 9/32 x 5/8 x 13/16
Mounting Float
Warranty Limited Lifetime
Regulatory UL/CUL Listed
Flammability 94V-0
* Distance will vary depending on cable quality
All information provided in this document is the exclusive property of Videobaluns Unlimited and
any reproduction of this document or unauthorized use is strictly prohibited without the expressed
permission of Videobaluns Unlimited, LLC.
Manufactured exclusively for Videobaluns Unlimited, LLC

Tel: (508) 620-1002
Fax: (508) 620-1004
Email: sales@videobaluns.com
Distributor Inquiries Welcome

GENESIS SERIES
General Communications Cable
HONEYWELL 4 Pair Shielded Cat 5e CMP Part 5388XXXX
Description:
4 pair Category 5e shielded twisted pair (F/UTP) cable, plenum communication (CMP) FT6 rated UL (or ETL)
Listed with 24 AWG solid bare copper conductors, FEP insulation, PVC jacket and a ripcord, 1000 - 0
(descending) footage marking. UL (or ETL) Verified to TIA/EIA-568 (Latest Revision) Category 5e and sweep
tested to 350 MHz
Physical Information:
UL Listing: CMP Conductor Color Code Pair
Insulation Type FEP Blue & White/Blue 1
Jacket Type PVC Orange & White/Orange 2
Jacket Diameter: 0.230” Green & White/Green 3
Voltage Rating: 300 V Brown & White/Brown 4
Temperature Rating: -20°C to 75°C
Print Legend*: HONEYWELL P/N 5388 SHIELDED 4PR24 CAT 5E EEEEEE (AAA) CL2P OR CMP
C(AAA)US FT6 75C (RoHS) BBB VERIFIED TO TIA-568-(NNN) CAT 5E XXXXXXXX
YYYY FT RM# A B C D E F 1 2 3 4 5 6 7 8 9
EEEEEE – UL or ETL listing #
AAA – UL or ETL
BBB – Verification UL or ETL
NNN – Most Recent Revision of TIA/EIA – 568 Standard (I.e. 568-C.2)
XXXXXXX – Tracking #
YYYY – Countdown Footage Marking Number
Electrical Characteristics:
Characteristic Nominal Value Maximum Value

DC Resistance 7.6 ohms/100m 9.38 ohms/100m
Resistance Unbalance 1.5% 5%
Capacitance 4.9 nF/100m 5.6 nF/100m
Capacitance Unbalance 50 pF/100m 330 pF/100m
Velocity of Propagation 69% NA
Propagation Delay 515 ns/100m 570 ns/100m
Delay Skew 15 ns/100m 45 ns/100m
NEXT PSNEXT ELFEXT PSELFEXT

Return Insertion Loss
Frequency Impedance (Min, (Min, (Min, (Min,
Loss (Max,
(MHz) (Ohms) dB/100m) dB/100m) dB/100m) dB/100m)
(Min, dB) dB/100m)
0.772 100 +/- 15 19.4 1.8 67.0 64.0 66.1 63.1
1 100 +/- 15 20.0 2.0 65.3 62.3 63.8 60.8
4 100 +/- 15 23.0 4.1 56.3 53.3 51.8 48.8
8 100 +/- 15 24.5 5.8 51.8 48.8 45.7 42.7
10 100 +/- 15 25.0 6.5 50.3 47.3 43.8 40.8
16 100 +/- 15 25.0 8.2 47.2 44.2 39.7 36.7
20 100 +/- 15 25.0 9.3 45.8 42.8 37.8 34.8
25 100 +/- 15 24.3 10.4 44.3 41.3 35.8 32.8
31.25 100 +/- 15 23.6 11.7 42.9 39.9 33.9 30.9
62.5 100 +/- 15 21.5 17.0 38.4 35.4 27.9 24.9
100 100 +/- 15 20.1 22.0 35.3 32.3 23.8 20.8
155 100 +/- 20 18.8 28.1 32.4 29.4 20.0 17.0
200 100 +/- 22 18.0 32.4 30.8 27.8 17.8 14.8
350 100 +/- 25 16.3 44.9 27.1 24.1 12.9 9.9
The above information is the property of Honeywell and is subject to change without notice Values above 100Mhz are for information only.
5388
09/26/14 - JM Page 1 of 1
GENESIS SERIES
Coaxial Cable
Part No. 5351
Description: 20 AWG RG59/U PLENUM COAX CABLE. (ETL) CL2 OR CM
C(ETL)US FT6 listed.
Compliance: UL13 & 444, NEC 725 & 800, CSA 22.2 No. 214
Construction:
Conductor 20 AWG Solid Bare Copper (0.032" Dia.)
Insulation
Type Foam FEP
Color White
Thickness 0.052" nom.
Diameter 0.135" nom"
Braid
Strands 0.0063" nom. Bare Copper
% Coverage 95 nom.
Jacket
Type PVC Plenum
Color Natural
Diameter 0.200" nom.
Legend (Ink Print) HONEYWELL P/N 5351 CCTV PREMIUM RG 59/U 20 AWG 3038058 (ET) CL2P OR
CMP C(ETL)US FT6 W/O# XXXXXX-XXXXXX C(ETL) CMP FT6 XXXXFT (RoHS)
CAMERA/ZONE A B C D E F 1 2 3 4 5 6 7 8 9
Properties
Temperature Rating 0 to 60 oC
Capacitance 16 pf/ft nom.
Impedance 75 Ohms nom.
Velocity of Propagation 82%
Resistance 10.1 Ohms/M' at 20oC
Resistance (Shield) 2.6 Ohms/M' at 20oC
Attenuation (db/100') 0.24 at 1 MHz, 6.2 at 400 MHz, 11.4 at 1000 MHz
Flame Rating NFPA 262, CSA FT6
REV A 09/01/10 OA
GENESIS SERIES
Coaxial Cable
Part No. 5104
Description: 20 AWG RG59/U COAX + 18 AWG 2/C FOR WET LOCATION
Construction:
Conductors 20 AWG Solid Bare Copper Center Conductor
2 - 18 AWG 16/30 Stranded Bare Copper
Insulation Coax 18 AWG 2/C

Type Foamed Polyethylene Polypropylene
Color White Blk, Red
Thickness 0.057" nom. 0.006" nom.
Diameter 0.145" nom 0.058" nom.
Lay Length --- 2.25" nom.
Braid
Strands 0.005" nom. Bare Copper
% Coverage 95 nom.
Water Blocking Water Swellable Material
Applied Under Jacket
Jacket Coax 18 AWG 2/C

Type Polyethylene
Color Black
Thickness 0.034" nom. 0.020" nom.
Diameter 0.245" nom. 0.156" nom.
Overall Diameter 0.421 x 0.245" Nom.
Legend (Indent)
HONEYWELL P/N 5104 CCTV PREMIUM RG 59/U 20 AWG + 18 AWG 2/C WET LOCATION COAX
SUN. RES
Properties
Coax 18 AWG 2/C
Temperature Rating -40 to 80°C -40 to 80°C
Capacitance 17 pf/ft nom. 22 pf/ft nom.
Impedance 75 Ohms nom. 69.2 Ohms nom.
Resistance (Conductor) 10.9 Ohms/M' at 20oC 6.5 Ohms/M' at 20oC
Resistance (Shield) 2.6 Ohms/M' at 20oC N/A
Attenuation (db/100') 0.2 at 1 MHz N/A
5.9 at 400 MHz
10.8 at 1000 MHz
REV A 09/01/10 OA
GENESIS SERIES
Low Voltage Cable
Part No. 3114
Description: 18 AWG 2/C STR CL2P, CMP, C(ETL)US FT6

Compliance: UL Standards 13 & 444, NEC Articles 725 & 800, CSA C22.2 No. 214
Construction:
Conductor 18 AWG 19/0.0092” Stranded Bare Copper
Insulation Plenum PVC
Color Blk, Red
Lay Length 3.25" nom.
Jacket
Type Plenum PVC
Color Natural
HONEYWELL P/N 3114 2C18 3038058 (ETL) CL2P OR CMP C(ETL)US FT6 (RoHS)
Legend (Ink Print) W/O# XXXXXX-XXXXXX XXXXX FT DEVICE/ZONE A B C D E F 1 2 3 4 5 6 7 8 9
Properties
Temperature Rating -20 to 60 oC
Operating Voltage 300 Volts max.
Capacitance 28 pf/ft nom.
Impedance 72 Ohms nom.
DC Resistance 6.5 Ohms/M' at 20oC
Flame Rating NFPA 262, CSA C22.2 No. 2556 (FT6)
REV A 09/01/10 OA
3
SYSTEM OPERATION
MANUAL

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
TruVision High Definition TVI
Vandal Dome Installation
Guide
TVD-2402/TVD-4402
TVD-2404/TVD-4404
P/N 1072937-EN • REV A • ISS 12MAR15

Content
Product overview 3
Camera description 5
Installation 7
Programming 12
Menu 15
Specifications 17
Legal and Regulatory information 18
2 Installation Guide
Product overview
This is the Pocket Guide for TruVision High
Definition TVI dome TVD-2402/TVD-4402 and TVD-
2404/TVD-4404. This guide describes a standard
installation.
Package contents:
 Camera with power  4 screws and 4
and video output anchors for wall or
cables ceiling installation
 Template  3 screws for install

the camera to back
box
Installation Guide 3
 Hex wrench  Monitor output
cable
 Spare rubber  Installation Guide

knockout
There is a rubber knockout
on the camera back box.
This one is for future use.
 CD • WEEE and Battery

Disposal
Camera description
3 4
5
6
9
8
1. Dome liner 6. TVI video output

2. Bubble cable (grey)
3. Lens 7. Back box
4. Power cable 8. DIP switch
5. CVBS video output 9. Menu button
cable (black)
Note:
Please check the camera output settings
before setting up a system. The TVI video
output can be only connected to DVR with
TVI signal input. The CVBS output supports
the standard monitor, test monitor, encoder
and DVR.
For TVD-2402/TVD-4202, the CVBS and TVI
output can not be performed at the same time,
you can use the built-in DIP switch to select
the camera video output.
For TVD-2404/TVD-4404, the built-in DIP
switch is used to enable/disable WDR feature,
when WDR feature is enabled, the CVBS
output will be blocked out.
DIP switch
Installation
To install the camera on a ceiling:
1. Using the template, place it level against the
mounting surface and mark the position of the
mounting holes.
2. Following all local codes, drill and prepare the
mounting holes.
3. Remove the camera from its back box.
4. Loosen the three set of screws on the edge of
the bubble with the supplied hex wrench.
5. Remove the bubble and the dome liner.
6. Secure the back box to the ceiling with the

supplied screws.
Note: Please remove the rubber knockout for
cable routing outside of the camera, when
required.
7. Using a 75-ohm coaxial video cable, connect
the camera TVI video output and a TVI DVR,
and connect a 12 VDC or 24 VAC power
supply to the power cable.
8. Align the camera with the back box and tighten
the set screws to secure the camera to the
back box.
7. Adjust the surveillance angle:
1) View the camera image on a monitor.
2) Rotate the panning table to adjust the pan
direction [0 to 355°].
3) Loosen the tilting lock screw.
4) Rotate the tilting table to adjust the tilt
direction [0 to 90°].
5) Tighten the tilting lock screw.
6) Rotate the camera lens holder [0 to 355°]
to adjust the lens to the surveillance angle.
~
~
8. Zoom and focus adjustment.
1) View the camera image using the monitor.
2) Loosen the zoom lever and move the
screw between T (Tele) and W (Wide) to
obtain the appropriate angle of view.
3) Tighten the zoom lock screw.
4) Loosen the focus lever and move the
screw between F (Far) and N (Near) to
obtain the optimum focus.
5) Tighten the focus lock screw.
Zoom Focus
Programming
Programming on TVI output:
Once the camera hardware has been installed, you
can configure the camera settings on the TVI DVR.
TVI
Please select PTZ protocol as TruVision Coax and
click menu button to call up the camera menu.
For more details, please see the TVI DVR user

manual.
Programming on CVBS output:

Programming on CVBS output, you need to connect
a monitor and a TVS-C200 controller (purchase
separately) as following system figure.
The TVS-C200 has one male BNC output and a

female output. Please connect the male output to
camera’s CVBS output and female output to a
monitor.
TVI
CVBS
TVD-2402/TVD-4402
The camera has CVBS and TVI selectable video
output. Please set the built-in DIP switch to CVBS
for viewing the program on a standard monitor.
In such case, its TVI will be blocked out until you

finish the settings and change DIP switch back to
TVI.
TVD-2404/TVD-4404
The camera has the CVBS and TVI dual video

output. The built-in DIP switch is for WDR/CVBS
selection.
Please set the built-in DIP switch to CVBS for
viewing the program on a standard monitor.
When the programing is finished, you may change
the DIP to WDR to enable the WDR feature. In such
case, the CVBS output will be blocked out.
If the DIP is set as CVBS, the WDR feature will be
disabled, and the camera has CVBS and TVI output
available at the same time.
Menu
TVD-2402/TVD-4402:
TVD-2404/TVD-4404:
Specifications
Power supply 24 VAC/12 VDC
Current TVD-2402/ TVD-4402:
12 VDC: Max. 300 mA
24 VAC: Max. 210 mA
TVD-2404/TVD-4404:
12 VDC: Max. 375 mA
24 VAC: Max. 270 mA
Power TVD-2402/ TVD-4402:
consumption 12 VDC: Max. 3.5W
24 VAC: Max. 5W
TVD-2404/TVD-4404:
12V DC: Max. 4.5W
24V AC: Max. 6.5W
Weight (net) 641 g / 1.41 lb. (without back box)
932 g / 205 lb. (with back box)
Dimensions Ø145.3 x 124.2 mm
(Ø 5.72 x 4.89 in. )
Legal and Regulatory
information
Copyright:
© 2015 United Technologies Corporation,
Interlogix is part of UTC Building & Industrial Systems, a unit of
United Technologies Corporation. All rights reserved.
Trademarks and patents:

Trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Manufacturer:
Interlogix
2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification:
N4131
FCC compliance: Class A

Class A: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
ACMA compliance
Notice! This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may
be required to take adequate measures.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-0330 du Canada.
European Union directives:

12004/108/CE (EMC directive): Hereby, UTC Fire & Security declares
that this device is in compliance with the essential requirements and
other relevant provisions of Directive 2004/108/EC.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection
points. For more information see:
www.recyclethis.info.
Contact information:
For contact information, see www.interlogix.com or
www.utcfssecurityproducts.eu
ALTV2416UL Series
CCTV Power Supplies
Installation Guide
Models Include:
• ALTV2416ULX • ALTV2416ULCBX
- 24VAC @ 7 amp (170VA) - 24VAC @ 7 amp (170VA)
or 28VAC @ 6 amp (170VA). or 28VAC @ 6 amp (170VA).
- Sixteen (16) Fuse Protected Outputs. - Sixteen (16) PTC Protected Outputs.
• ALTV2416300UL • ALTV2416300ULCB
- 24VAC @ 12.5 amp (300VA) - 24VAC @ 12.5 amp (300VA)
• ALTV2416300ULM • ALTV2416300ULCBM
- 24VAC @ 12.5 amp (300VA) - 24VAC @ 12.5 amp (300VA)
• ALTV2416600UL • ALTV2416600ULCB
- 24VAC @ 25 amp (600VA) - 24VAC @ 25 amp (600VA)
Rev. 040506
Overview:
These Altronix CCTV Power Supplies provide 24VAC/28VAC distributed via sixteen (16) fuse or PTC protected
outputs for powering CCTV Cameras, heaters and other video accessories.
Sixteen (16) Output ALTV2416UL Reference Chart:
Fuse Protected Class

(Class 3 for Wet loca-
Number of Outputs
total output current).

output not to exceed
Individual Output
Current (max. per
for Dry locations).
Agency Listings
Current (Power)
Outputs (Class 2
Output Voltage
Primary In-line
115VAC 60Hz
PTC Protected
Main Fuse
Input Current
Fuse Ratings
Fuse Ratings
Total Output
power limited
Ratings
1 Outputs
Altronix
tions).
Model Number
ALTV2416ULX 24VAC 7 amp 16 ------ Yes 3.5 amp 3.5 5A/ 3.5A/ 1.8
28VAC 6 amp amp 250V 250V amp
ALTV2416ULCBX 24VAC 7 amp 16 Yes ------ 2.5 amp ------ 5A/ 3.5A/ 1.8
28VAC 6 amp 250V 250V amp
ALTV2416300UL 24VAC 12.5 amp 16 ------ Yes 3.5 amp 3.5 15A/ ------ 2.7
28VAC 10 amp amp 32V amp
ALTV2416300ULCB 24VAC 12.5 amp 16 Yes ------ 2.5 amp ------ 15A/ ------ 2.7
28VAC 10 amp 32V amp
ALTV2416300ULM 24VAC 12.5 amp 16 ------ Yes 3.5 amp 3.5 ------ 2.7
28VAC 10 amp amp amp
ALTV2416300ULCBM 24VAC 12.5 amp 16 Yes ------ 2.5 amp ------ ------ ------ 2.7
28VAC 10 amp amp
ALTV2416600UL 24VAC 25 amp 16 ------ Yes 3.5 amp 3.5 15A/ ------ 5.4
28VAC 20 amp amp 32V amp
ALTV2416600ULCB 24VAC 25 amp 16 Yes ------ 2.5 amp ------ 15A/ ------ 5.4
28VAC 20 amp 32V amp
Specifications:
• UL Listed for Commercial CCTV Equipment (UL 2044). • Ease of installation saves time & eliminates costly labor.
CUL Listed - CSA Standard C22.2 No.1-98, Audio, • Spare fuses included (on fuse protected models).
Video and Similar Equipment. Enclosure Dimensions:
• Surge suppression. ALTV2416300ULM and ALTV2416300ULCBM:
• AC power LED indicator. 8.5”H x 7.5”W x 3.75”D
• Power ON/OFF switch ALTV2416ULX, ALTV2416ULCBX, ALTV2416300UL,
(ALTV2416ULX, ALTV2416ULCBX). ALTV2416300ULCB, ALTV2416600UL and
• Illuminated power disconnect circuit breaker ALTV2416600ULCB:
with manual reset (all other models). 13.5”H x 13”W x 3.25”D
• Unit maintains camera synchronization.
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local
codes and authorities having jurisdiction. Product is intended for indoor use only.
1. Mount unit in desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the
enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s
upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the
enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two
upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pgs. 11-12).
Secure enclosure to earth ground.
- 2 - ALTV2416UL Series
2. Set power switch on power distribution board marked [PD] to OFF position for models ALTV2416ULX or
ALTV2416ULCBX (Figs. 1, 2, pgs. 4, 5). Set power disconnect circuit breaker to OFF position for all
other models (Figs. 3a-8a, pgs. 6-10).
3. All units are factory set for 24VAC operation.
For 28VAC operation, adjust unit prior to mounting and applying power as follows:
Change the wire position so that the wire marked [28V] is connected to the terminal marked [P] and
the wire marked [24V] is connected to the terminal marked [S].
Note: ALTV2416ULCBX set for 28VAC operation is not Class 2 Rated, not power limited.
4. Connect AC power to the black and white flying leads of the transformer(s) (Figs. 1-8, pgs. 4-10).
Use 18 AWG or larger for all power connections.
Keep power limited (PTC protected outputs only) wiring separate from non-power limited wiring.
Minimum .25” spacing must be provided. Use separate knockouts.
5. Set power switch on power distribution board marked [PD] to ON position for models ALTV2416ULX or
ALTV2416ULCBX (Figs. 1, 2, pgs. 4, 5). Set power disconnect circuit breaker to RESET (ON) position for
all other models (Figs. 3a-8a, pgs. 6-10).
6. Measure output voltage before connecting devices. This helps avoid potential damage.
Terminals marked [1P - 16P] are of the same polarity.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
7. Set power switch on power distribution board marked [PD] to OFF position for models ALTV2416ULX or
ALTV2416ULCBX (Figs. 1, 2, pgs. 4, 5). Set power disconnect circuit breaker to OFF position for all
other models (Figs. 3a-8a, pgs. 6-10).
8. Connect devices to terminals marked [1P - 1N through 8P - 8N] on PD8 board (Figs. 1-4, pgs. 4-7,
Figs. 7-8, pgs. 9-10), or terminals marked [1P - 1N through 16P - 16N] on PD16W/PD16WCB board
(Figs. 5-6, pg. 8), carefully observing polarity.
9. Set power switch on power distribution board marked [PD] to ON position for models ALTV2416ULX or
ALTV2416ULCBX (Figs. 1, 2, pgs. 4, 5). Set power disconnect circuit breaker to RESET (ON) position for
all other models (Figs. 3a-8a, pgs. 6-10).
10. Green LED will illuminate when power is present.
11. Upon completion of wiring, secure enclosure door with screws (supplied). Installation of cam lock is optional.
Caution: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to all local codes and in
accordance with the National Electrical Code. Use 75º C or higher rated UL insulated wiring for connecting the
unit to the mains. Replace fuses only with the same type and rating (refer to Sixteen (16) Output ALTV2416UL
Reference Chart, pg. 2).
Terminal Identification:
PD8 - Power Distribution Module
Terminal Legend Function/Description
1P - 8P AC output.
1N - 8N AC output.
PD16W - Power Distribution Module

Terminal Legend Function/Description
1P - 16P AC output.
1N - 16N AC output.
ALTV2416UL Series -3-

The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient
magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user serviceable parts inside. Refer servicing to qualified service personnel.
Fig. 1
ALTV2416ULX
24VAC or 28VAC output 1

(Follow same procedure using
terminals 2P & N through 8P & N
outputs 2 through 8)
P
MAIN FUSE
N
INPUT
Connected
to Door
1
COMMON
LED
FUSED
ON OFF
S
2
P
3
POWER
D1
R1
POWER
N
4
Class 1 Outputs
OUTPUTS
OUTPUTS
8
6
7
7
OUTPUTS
OUTPUTS
6
8
Class 1
Outputs
POWER
POWER
4
N
R1
D1
3
P
COMMON
FUSED
2
S
LED
1
INPUT
ON OFF
MAIN FUSE
N
P
Primary
In-line
Fuse 24VAC or 28VAC output 1
non-power limited
Ground
non-power limited
115VAC input, White

60 Hz. Lead
Black
XFMR XFMR
Lead
Black
Lead
Fig. 2
ALTV2416ULCBX
24VAC or 28VAC
output 1 (Follow same
procedure using terminals 2P & N
through 8P & N outputs 2 through 8)
P
OFF ON
N
INPUT
MAIN FUSE
Connected
SW1
to Door
F1
COMMON
LED
S
F8
F2
P
D1
R1
POWER
F7
F3
N
24VAC configuration
Class 2 Not Wet/
Class 3 Wet
OUTPUTS
F6
F4
28VAC configuration
Class 1 F5
F5
OUTPUTS
24VAC
F4
F6
configuration
Class 2 Not Wet/
Class 3 Wet
POWER
28VAC
F3
F7
configuration
N
Class 1
R1
D1
P
F2
COMMON
F8
S
LED
F1
SW1
INPUT
MAIN FUSE
N
ON OFF
P
Primary
In-line
Fuse 24VAC or 28VAC
non-power limited
Ground
non-power limited
115VAC input, White
60 Hz. Lead
Black
XFMR XFMR
Lead
Black
Lead

Fig. 3
ALTV2416300UL

P
N
MAIN FUSE
INPUT
Connected
LED
COMMON
FUSED
to Door
S
2
P
3
D1
POWER
R1
POWER
N
4
Class 1 Outputs
OUTPUTS
OUTPUTS
8
5
7
6
OUTPUTS
OUTPUTS
7
5
8
Class 1
Outputs
POWER
POWER
4
N
R1
D1
3
P
COMMON
FUSED
2
S
LED
1
INPUT
MAIN FUSE
N
P
Fig. 3a
Ground
non-power limited
non-power limited
Black Lead
115VAC input, Illuminated Power Disconnect

Circuit Breaker with manual reset
60 Hz
White Lead
XFMR*
Fig. 4
ALTV2416300ULCB
24VAC or 28VAC
P
N
OFF ON
INPUT
MAIN FUSE
Connected
SW1
F1
COMMON
LED
to Door
S
F2
F8
P
D1
POWER
R1
F3
F7
N
24VAC configuration
Class 2 Not Wet/
Class 3 Wet
OUTPUTS
F4
F6
F5
F5
OUTPUTS
F6
F4
24VAC
configuration
Class 2 Not Wet/
POWER
Class 3 Wet
F7
F3
N
R1
D1
P
F8
F2
COMMON
S
LED
F1
SW1
INPUT
MAIN FUSE
ON OFF
N
P
24VAC or 28VAC
Fig. 4a
Ground
non-power limited
non-power limited
Black Lead
115VAC input Illuminated Power Disconnect

60 Hz
White Lead
XFMR*

Fig. 5
Fig. 5a
ALTV2416300ULM
Illuminated Power Disconnect

1 2 3 4 5 6 7 8 common 9 10 11 12 13 14 15 16
outputs N
protected P
outputs
N
N
P
P
Transformer
S
underneath XFMR*
power supply
XFMR Input
board
For continuous protection against risk of fire

replace fuses with same type and rating.
3.5A 250V
Fig. 6
ALTV2416300ULCBM Fig. 6a

1 2 3 4 5 6 7 8 common 9 10 11 12 13 14 15 16
outputs N
protected P
outputs
N
N
P
P
Transformer
S
underneath
power supply
XFMR Input
board
Fig. 7
ALTV2416600UL

P
N MAIN FUSE
INPUT
Connected
1
COMMON
to Door
LED
FUSED
S
2
P
3
POWER
D1
R1
POWER
N
4
Class 1 Outputs
OUTPUTS
OUTPUTS
8
6
7
7
OUTPUTS
OUTPUTS
6
8
5
Class 1
Outputs
POWER
POWER
4
N
R1
D1
3
P
COMMON
FUSED
2
S
LED
1
INPUT
MAIN FUSE
N
P
non-power limited
Ground
Fig. 7a
non-power limited

115VAC input, XFMR* XFMR*
60 Hz.
Black
Lead
White non-power limited
Lead

Fig. 8
ALTV2416600ULCB
24VAC or 28VAC
P
N
INPUT
MAIN FUSE
Connected
F1
COMMON
to Door
LED
S
F2
F8
P
D1
POWER
R1
F3
F7
N
24VAC configuration
Class 2 Not Wet/
OUTPUTS
Class 3 Wet
F4
F6
F5
F5
OUTPUTS
F6
24VAC
F4
configuration
Class 2 Not Wet/
Class 3 Wet
POWER
F7
F3
N
R1
D1
P
F8
F2
COMMON
S
LED
F1
INPUT
MAIN FUSE
N
P
24VAC or 28VAC
non-power limited
Ground
Fig. 8a
non-power limited

115VAC input, XFMR* XFMR*
60 Hz.
Black
Lead
White non-power limited
Lead
Enclosure Dimensions for:
• ALTV2416300ULM
• ALTV2416300ULCBM 3.63"
8.5”H x 7.5”W x 3.75”D
1.25"
3.85"
7.25"
1.25" 0.60" 0.60" 1.25"
1.00" 0.90" 0.90" 1.00"
8.13" 8.13" 8.13"
1.75"
1.00" 1.00"
1.25" 0.60" 0.60"
3.85" 7.25"
3.85"
1.00"
1.00" 1.00"
7.25"
ALTV2416UL Series - 11 -
Enclosure Dimensions for:
• ALTV2416ULX
• ALTV2416ULCBX
• ALTV2416300UL
• ALTV2416300ULCB
• ALTV2416600UL
• ALTV2416600ULCB
13.5”H x 13”W x 3.5”D
Altronix is not responsible for any typographical errors.
Altronix Corp.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A. MEMBER
II1ALTV2416ULSeries G16L
RECORD DRAWINGS
4

OFFICE: (281) 347-7973 FAX: (281) 347-7975
ACR-2844 ECR-2041
ISSUES AND REVISIONS
DATE: ISSUED FOR:
05/09/16 SUBMITTED FOR INITIAL REVIEW

ELEC
S172
08/25/17 RECORD DRAWING COMPLETED
EQUIPMENT PLUMBING
LAUNDRY
N151 S166
N151A
MS SHOWERS ELEC
CORRIDOR MS LOCKER RM N156B S170
N155 N156
STOR
S168
MS COACH STAGE STORAGE
N153 S152A
MS RR
N156C
VEST.
N164
RR CUST STOR. COOLER

N153A N170 S160G
STAGE
GYM KITCHEN MULTIPURPOSE S152
PREP
N150 S154
S160
HS RR
HOME RUNS TO BCR N105

N154C FCR STAIR B
HS COACH FREEZER S136 S134
N153B LOBBY S160F
SERVERY
N163
S156
HS LOCKER RM STORAGE
CORRIDOR N154 S137
N152 HS SHOWERS
N154B KITCHEN MNGR
DRY STORAGE RR LCKR RM

LDRY/JAN OFFICE
S160E S160C S160B S160A
S160D
CM
LEARNING CENTER
S132
CUSTODIAL MENS RR WOMENS RR
CONC./TICKETS
CM
U N161 N160
N162
ASSI. RR
PLANT ENG. MP STORAGE
W STORAGE CUSTODIAL SUPPLY STORAGE
S158 S154C
S150B S164 S162
MICKEY LELAND COLLEGE PREP ACADEMY

HOME RUNS TO BCR N105 MULTI-PAIR HOME RUN TO BCR N105
HOME RUNS TO BCR N105 S150
HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
CORRIDOR HOME RUNS TO BCR N105 CORRIDOR
CM
CM
CM
CM
CM
CM
N149 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
CM
HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
MULTI-PAIR HOME RUN TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
CM
CM
HOME RUNS TO BCR N105 LEARNING CENTER
CORR
S130
N146
FCR ELEC
N148 N147 ELEVATOR SCIENCE SCIENCE
S150A S155 S151

1701 BRINGHURST STREET

HOUSTON, TEXAS 77020
LEARNING CENTER LEARNING CENTER
N145 S128
PREP ROOM
S153
CLOSED CIRCUIT T.V. SYSTEM
SYMBOL LEGEND
CM
CORRIDOR
CM
S110
CCTV SYSTEM HEAD END EQUIPMENT RACK PROVIDED BY
CCHE OWNER, FIELD COORDINATE FINAL LOCATION WITH OWNER
LEARNING CENTER LEARNING CENTER

CCTV TERMINATION POINT LOCATED ON FLOOR 2 N144
PBK CONSISTS OF BNC CONNECTORS AND PUNCH BLOCK(S)
S120
ALTV2416300ULCB ALTRONIX CAMERA POWER SUPPLIES
CORRIDOR
PWR
CM
N140
EACH ONE REQUIRES 115 VAC BY E.C. IN ALL LOCATIONS VEST.
CM
N151I
FACULTY
CT-2M-D21 INDOOR DOME CCTV CAMERA WITH WALL MOUNT S126
CUST.
REFERENCE MOUNTING STANDARDS FOR CLARIFICATION S124
CORRIDOR
MS COMMONS
LEARNING CENTER N101
N139
N143
CT-2M-D21 INDOOR DOME CCTV CAMERA CEILING MOUNTED HS COURTYARD

CM RR
S122
CT-2M-OV21 VANDAL RESISTANT DOME CAMERA WALL MOUNT

REFERENCE MOUNTING STANDARDS FOR CLARIFICATION
CT-2M-OV21 WEATHERPROOF DOME CAMERA WALL MOUNTED

REFERENCE MOUNTING STANDARDS FOR CLARIFICATION LEARNING CENTER
N142
LEARNING CENTER
S118
EXT.
STOR.
S101C
WIRE LEGEND
LEARNING CENTER
18 AWG, 1 PAIR CL3 NON SHIELDED, FOR CCTV CAMERA POWER
S116
SCIENCE LEARNING
CENTER
STOR.
RG-59 COAXIAL CABLE, FOR CCTV CAMERA TERMINATIONS N141
S101C
CAT-6 PLENUM RATED CABLE, PROVIDED WITH A VIOLET JACKET VISUAL ARTS
CM
S101
CM
25 PAIR, 22 AWG CABLE, FOR TERMINATION POINTS TO HEAD END

BCR
N105
COMMUNITY RM KILN
SP. ED. LEARNING
DATA CENTER CENTER N103 S101D
CCHE
PWR PWR
PWRPWR
N104 LEARNING CENTER

N106
S114
LECTURE HALL
S105
LAB STORAGE HOME RUNS TO BCR N105

CORR HOME RUNS TO BCR N105
CM
CM
N141A ELEC. HOME RUNS TO BCR N105

N102 HOME RUNS TO BCR N105
CM
CM
CM
CM
HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
CM
CM
STAIR C HOME RUNS TO BCR N105
HOME RUNS TO BCR N105 HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
HOME RUNS TO BCR N105 CORRIDOR HOME RUNS TO BCR N105 HOME RUNS TO BCR N105
CM
CM

CORR HOME RUNS TO BCR N105
CORRIDOR HOME RUNS TO BCR N105
N126
S100
MAIL RM
N102B OFF A RR FCR ELEC
SECURITY N159 N172 S109B S109C CUST
OFF B CUST
CORR N125 S109D
N131 N124 TEACHER STOR
N119 S108B
SS RECEPT
N130A
MAIN CONF. RECEPT

N123 N168
WORKROOM TESTING STOR,
MEN'S RR N158 VEST.
OFF B N117 RECEPTION
N121 N100
N132 N107
CORRIDOR
FILE ROOM
N130 TOOLS
N118
RR
CLINIC S104B
CONF. RM ROBOTICS S108C
N134 N129 LEARNING CENTER TEACHER
OFF B STOR RR S102 ROBOTICS- FAB
WOMEN'S RR ROBOTICS S107 WORKROOM
CM
N133 N122 N169 S104

N120 S106 S108
This drawing and the information and design Application

CM
herein contained is the property of CLS Technology Inc.

CM
CM
CORR
N135 CORR
N109
KITCHEN
and is provided upon the express conditions that the same
S108D COPIER ROOM be returned to CLS Technology Inc. upon request. All
S108A
PRINCIPAL OFFICE information herein contained shall be treated as secret and
N138
CONF. RM
RR
N116A OFF A OFF B OFF A OFF B (ITIN) OFF B (ITIN) OFF A OFF A SMALL CONF
confidential. No reproduction or re-transmission of this
N136 N137 N116 N115 N114 N113 N112 N111 N110 drawing or any part thereof shall be made without the
express written consent of CLS Technology Inc.
CCTV SYSTEM
FLOOR PLAN
OCCUPANCY ADDRESS:
DRAWN BY: DRAWING SCALE: DATE DRAWN:
MICKEY LELAND COLLEGE PREP CCTV SYSTEM LAYOUT FLOOR 1 DLP 1/16" = 1'-0" 05/09/16
PROJECT NO.:
SCALE: 1/16" = 1' - 0"
WP C1552
DRAWING NO.
CC-01
ISSUES AND REVISIONS
DATE: ISSUED FOR:
05/09/16 SUBMITTED FOR INITIAL REVIEW
08/25/17 RECORD DRAWING COMPLETED
COMPUTER REPAIR
N230
INSTRUMENTAL
MUSIC
N225
VEST.
N164
UPPER
MULTI-PURPOSE
GYM S254
N150
WEIGHT
UNIFORM/MUSIC FCR
N223 S236
LIBRARY/STOR
STAIR
N228
S234
INSTRUMENT
STORAGE
PWR PBK
N225C
LOWER
KITCHEN
STORAGE
PRACTICE ROOM S237
#1
N232
COLLABORATIVE
SPACE MOTHER
N227 S238
LEARNING CENTER
S232
STOR PRACTICE ROOM

N217C #2
N231
COLLAB
S240
MICKEY LELAND COLLEGE PREP ACADEMY

CORRIDOR
CM
HOME RUNS TO FCR N220 S250
CM
CM
CM
CM
CM
CM
HOME RUNS TO FCR S236
HOME RUNS TO FCR N220
CM
CM
CM
HOME RUNS TO FCR S236 HOME RUNS TO FCR S236
HOME RUNS TO FCR S236 HOME RUNS TO FCR S236
CM
CM
CORRIDOR LEARNING CENTER
N222 S230
CM
FCR ELEC
N220 N221 SCIENCE
S255 SCIENCE
S251
PWR PBK



CLOSED CIRCUIT T.V. SYSTEM LEARNING CENTER

LOWER
SYMBOL LEGEND LEARNING CENTER
N219
CANOPY
S228
PREP ROOM
CCTV SYSTEM HEAD END EQUIPMENT RACK PROVIDED BY S253
CCHE OWNER, FIELD COORDINATE FINAL LOCATION WITH OWNER
CCTV TERMINATION POINT LOCATED ON FLOOR 2

PBK CONSISTS OF BNC CONNECTORS AND PUNCH BLOCK(S)
LEARNING CENTER
LEARNING CENTER
S220
ALTV2416300ULCB ALTRONIX CAMERA POWER SUPPLIES
PWR
N218
EACH ONE REQUIRES 115 VAC BY E.C. IN ALL LOCATIONS
CT-2M-D21 INDOOR DOME CCTV CAMERA WITH WALL MOUNT

LOWER CANOPY
CORRIDOR
N205A
FACULTY
CT-2M-D21 INDOOR DOME CCTV CAMERA CEILING MOUNTED CUST.

S226
CM
CM
CM
SCIENCE
CM
CM
N217
CT-2M-OV21 VANDAL RESISTANT DOME CAMERA WALL MOUNT
REFERENCE MOUNTING STANDARDS FOR CLARIFICATION RR
S222
CT-2M-OV21 WEATHERPROOF DOME CAMERA WALL MOUNTED
CORRIDOR
S200
LEARNING CENTER
S218
WIRE LEGEND
LAB PREP
CORRIDOR
N217A
N215
18 AWG, 1 PAIR CL3 NON SHIELDED, FOR CCTV CAMERA POWER
RG-59 COAXIAL CABLE, FOR CCTV CAMERA TERMINATIONS

LEARNING CENTER
S216
CAT-6 PLENUM RATED CABLE, PROVIDED WITH A VIOLET JACKET
25 PAIR, 22 AWG CABLE, FOR TERMINATION POINTS TO HEAD END
FACULTY RR STORAGE CONFERENCE

SMALL GROUP SMALL GROUP N201B ROOM
N217B
N237 N236 N201D
SCIENCE
CUST LEARNING CENTER
N216
N202 S214
CM
STAIR C
CM
N211
CM
TEACHER WORK
ROOM
CM
N201
LOWER
RR
N203 ROBOTICS AP REC AP OFFICE
S204
STOR. AP WAITING S202
N212
AP
N213
ROOF
N214
CM
FCR ELEC
COPY ROOM S200A STORAGE
S200B
CM
CM
CM
N201C
CORRIDOR S204A
N200
VEST.
N100
LIB OFFICE
S208A
MEDIA CENTER
S208
LEARNING CENTER
LEARNING CENTER
N209
LEARNING CENTER
N208
LEARNING CENTER LEARNING CENTER This drawing and the information and design Application
N210 N207 N206
SML GRP
herein contained is the property of CLS Technology Inc.
S208B and is provided upon the express conditions that the same
be returned to CLS Technology Inc. upon request. All
information herein contained shall be treated as secret and
confidential. No reproduction or re-transmission of this
drawing or any part thereof shall be made without the
express written consent of CLS Technology Inc.
CCTV SYSTEM
FLOOR PLAN
OCCUPANCY ADDRESS:
DRAWN BY: DRAWING SCALE: DATE DRAWN:
MICKEY LELAND COLLEGE PREP CCTV SYSTEM LAYOUT FLOOR 2 DLP 1/16" = 1'-0" 05/09/16
PROJECT NO.:
SCALE: 1/16" = 1' - 0"
WP C1552
DRAWING NO.
CC-02

02 - O&M CCTV Manual PDF

Uploaded by

Copyright:

Available Formats

02 - O&M CCTV Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

02 - O&M CCTV Manual PDF

Uploaded by

Copyright:

Available Formats

What equipment is included in the system?

What equipment is included in the system?

What are the different sections of the manual?

What are the different sections of the manual?

“Providing Life Safety across Texas”

Operations & Maintenance Manual

HISD Mickey Leland College Prep Academy

5206 EAST THIRD STREET, KATY, TEXAS, 77493

System Certification & Warranty Section 1

Equipment Data Sheets Section 2

System Operation Manual Section 3

Record Drawings Section 4

5206 EAST THIRD STREET, KATY, TEXAS, 77493

5206 EAST THIRD STREET, KATY, TEXAS, 77493

Interlogix products purchased from a Distributor, then such

Warranty periods vary based on product category and type of

Product Warranty Periods

Returning Interlogix Products Tech Support

Refurbished B-stock Products

Packaging Your Shipment

Table 3: VIDEO Products TVB-3201 TVD-M5225V-4-P TVN-2116-2T

5206 EAST THIRD STREET, KATY, TEXAS, 77493

1080P 960H IR OSD

OVERVIEW STANDARD FEATURES

Installation and Environment

Image Sensor 1/3" CMOS

12VDC: 3.5W (Max.) 12VDC: 4.5W (Max.)

60°C) with heater on 60°C) with heater on 60°C) with heater on

Environmental Rating IP66

Vandal Rating N/A IK10 N/A IK10

Compliance FCC, CE, UL, RCM, REACH, RoHS, WEEE

TVD-4401, TVD-2401, TVD-4403, TVD-2403 Fixed Lens Dome

TVD-4402, TVD-2402, TVD-4404, TVD-2404, TVD-4405, TVD-2405 Dome

1.8 in. 3.3 in.

Ordering Information Accessories

P/N 1072649B-EN • REV 1.0 • ISS 30SEP13

Contact information For contact information, see www.utcfireandsecurity.com or www.utcfssecurityproducts.eu.

Bracket and cup base descriptions 2

Wall-mount installation (TVD-SNB and TVD-M2-WM) 4

Flush-mount installation (TVD-M2-FM) 8

Pendant-mount installation (TVD-PPB) 10

Pole-mount installation (TVD-M-PMA) 13

Pipe threading information 15

Overview: Fixed dome cameras by bracket 16

TruVision Dome Brackets Installation Manual 1

Bracket and cup base descriptions

TruVision dome pendant-mount ceiling bracket (TVD-PPB)

2 TruVision Dome Brackets Installation Manual

TruVision pole-mount adaptor (TVD-M-PMA)

TruVision indoor dome wall-mount bracket (TVD-M2-WM)

TruVision dome cup bases

TruVision Dome Brackets Installation Manual 3

Screw Ø 4 mm (2 Expansion screw Screw Ø 4 mm Locking screw Ø 4 mm Black screw Ø 4 mm

Wall-mount installation (TVD-SNB and TVD-M2-

5-inch dome cameras

To mount a swan-neck bracket on a wall:

4 TruVision Dome Brackets Installation Manual

To mount a swan-neck bracket on a wall: OUTDOOR

2. Screw the cup base onto the swan-neck bracket