SunLite GigE

SLGE

Now with Packet Delay Variation per RFC3393

The SunLite GigE, is a rugged, compact and lightweight palm sized
test solution with long battery operation hours for the installation
and maintenance of Metro Ethernet and IP services. A complete
set of testing capabilities makes the SunLite GigE ideal for the field
technician who needs to verify end-to-end transport of 10/100/1000
and Gigabit Ethernet/IP traffic, perform BER tests, determine
throughput, link utilization, round trip delay, and IP connectivity.

The intuitive graphical user interface of the SunLite GigE, along

with the straightforward creation and sharing of test profiles, allow
technicians with limited Ethernet or IP testing experience to verify
performance parameters for Gigabit Ethernet services. The wide range
of test functionalities of the SunLite GigE provides all of the tools
needed for verifying Service Level Agreements (SLAs) between service
providers and their customers.

KEY FEATURES TEST FEATURES

• Full 10/100/1000 Mbps and Gigabit Ethernet line rate • Enables service providers and operators to turn-up and trouble-
traffic generation shoot Gigabit Ethernet and IP services
• Performs throughput, latency, Packet Delay Variation, frame loss, • Allows service providers to verify SLAs between themselves and
and back-to-back tests per RFC 2544 their customers
• BER testing at Layer 1, Layer 2, and Layer 3 (IP) for Gigabit Ether- • Automated SLA verification with RFC 2544 testing
net and IP services • Layer 2 CoS settings for verifying Metro Ethernet services
• IP verification with Ping, Trace Route, and IP Throughput across a • Test profile storing and loading for fast deployment of
routed network Gigabit Ethernet services
• Generate up to 8 traffic flows with different MAC address, VLAN
tags, MPLS, IP address, payload and bandwidth configurations SPECIFICATIONS
• Class of Service (CoS) (via VLAN P-bit) and IP Type of Service
(ToS)/DSCP traffic prioritization settings Connector type
• 10/100/1000BASE-T and 1000BASE-X dual media Duplex LC for 1000Base-X
test interfaces RJ-45 UTP for 10/100/1000Base-T
• Control/Respond Loopback feature to loop-up/down a far end Optical transceiver type: SFP (small GBIC) field interchangeable
STT, MTT Ethernet test modules or GigE Responder SA580-850 (1000Base-SX)
• Test Profiles for fast and efficient test set configuration Transmitter
and operation
– Wavelength: 850 nm multi-mode
• Events Log – Power: -9.5 dBm to -4 dBm
Receiver
BENEFITS – Wavelength: 770 nm to 860 nm
– Signal: -21 dBm to 0 dBm max
• Rugged, compact, lightweight, quick boot-up time, high
resolution color screen Optical Power Measurement (OPM) function available
• Eliminates the need for multiple instruments SA580-1310 (1000Base-LX)
• Complete solution for Installation and Maintenance (I&M) of Transmitter
Gigabit Ethernet and IP services – Wavelength: 1310 nm single-mode
• Cost-effective and future-proof – Power: -9.5 dBm to -4 dBm
• Completely interoperable with STT, MTT Ethernet test modules or Receiver
GigE Responder for mixed 10/100/1000 Ethernet deployments – Wavelength: 1270 nm to 1600 nm
– Signal: -25.5 dBm to -3 dBm max
Optical Power Measurement (OPM) function available

www.sunrisetelecom.com
 SPECIFICATIONS (continued) RFC 2544
SA580-1550 (1000Base-ZX) Throughput, latency, PDV, frame loss rate, and back-to-back frames
Transmitter tests conform to RFC 2544 standard
– Wavelength: 1550 nm single-mode Recommended frame sizes (64, 128, 256, 512, 1024, and 1518 byte)
– Power: +3 dBm to -2 dBm plus one user configurable frame size (64-12000 byte) can be tested
Receiver Tests can be run individually or in sequence
– Wavelength: 1270 nm to 1570 nm Available for Layer 2, and Layer 3 testing, including Ethernet routed circuits
– Signal: -24 dBm to -3 dBm max Configurable IP header fields (ToS, TTL, Protocol, and Frame Offset) for
Optical Power Measurement (OPM) function not available QoS verification testing
Tx Rate configurable to percentage or data rate (Mbps)
Operation Mode
Point-to-Point mode
Auto-negotiation enabled or disabled
OTHER FEATURES
Auto-negotiation parameters: Pause flow control, 10/100/1000 full/ Multiple User Profiles
half duplex mode Up to 16 different test configuration profiles may be saved
Port selection and Laser On/Off
Test profiles saved and loaded with the press of a button
BER/Throughput Testing
Results
End-to-end testing with two test sets
Single-ended testing with loop on the other end Test results are saved in text format for easy retrieval, sharing, print and
analysis of data through the management port or USB memory device
Traffic Generation Report generation with graphs (MTT Reporter)
Layer 1, Layer 2, or Layer 3 traffic
Configurable source and destination MAC address
Configurable 802.1q VLAN tag and 802.1p priority
PRODUCT DESCRIPTION
Size (W × L × H): 3.6 × 6.3 × 1.6 in (90 × 160 × 40 mm)
Stacked VLAN: none, 1, 2 (Q-in-Q) or 3.
Configurable source and destination IP address (IPv4) Weight: 1.10 lb (0.50 kg)
Configurable IP header fields (ToS, TTL, Protocol, and Frame Offset) for Color TFT-LCD screen: 320 x 240
QoS verification testing Operating temperature: 32° to 104°F (0° to 40°C)
Up to 8 traffic flows (MAC address, IP address, VLAN tag) Storage temperature: -4° to 158°F (-20° to 70°C)
Test patterns: All 1s, All 0s, ITU-T PRBS (2e23, 2e31, 2e23C, 2e31C) Humidity: 10% to 85% non-condensing
normal or invert, or user defined (2 bytes) Link/Activity, Signal/Error, Pat. Sync, Power/Battery, LEDs
Frame length 48 to 1522 bytes or Jumbo frame (up to 12 kbytes) Li-Ion rechargeable batteries
Frame rate 0% to 100% bandwidth utilization with steps of 1% Retractable stand
Traffic shaping: Constant, ramp, or burst Other connectors
Error/Alarm injection: Bit, CRC, IP Checksum error and rate injection • DC power jack for charger
Test duration • USB Host connector for file transfer. RJ-45 ports can be used
Measurements for field software upgrade, file management and transfer.
Performance statistics: Transmitted and received bandwidth
utilization (Min, Max, Average), frame rate (Min, Max, Average), ORDERING INFORMATION
transmitted and received line rate and data rate (kbps) SLGE ������������������� Single port, dual media, 10/100/1000 Mbps
Frame statistics: Aggregate and per stream statistics in number of Ethernet test unit
transmitted and received frames, number of received VLAN tagged
frames, number of lost, out of sequence frames, number of received SA580-850 ��������� 850 nm LC SFP Field Interchangeable
Optical Transceiver
runt, oversized, multicast, flow control, broadcast and unicast frames,
inter-frame delay measurement (Packet Delay Variation per stream SA580-1310 ������� 1310 nm LC SFP Field Interchangeable
(Min, Max, Avg) ) Optical Transceiver
Loopback Mode SA580-1550 ������� 1550 nm LC SFP Field Interchangeable
Automatically loops incoming frames with swapping the source and Optical Transceiver
destination MAC/IP address
Manual or controller/responder mode Additional Accessories:
Loopback filters
SA148 ����������������� SFP Optics Container
IP FEATURES SA265 ����������������� Cable, 100 Ohm, CAT 5, RJ45 (M) to RJ45 (M),
Ping over VLAN Cross-over, 6’
Sends Echo (Ping) requests SA266 ����������������� Cable, 100 Ohm, CAT 5, RJ45 (M) to RJ45 (M), 6’
Statistics on Ping messages
SA561 ����������������� Optical Patch Cord, LC-SC duplex, MMF,
Trace Route 62.5/125 um, 6’
Trace the IP route over the IP network SA562 ����������������� Optical Patch Cord, SMF, LC-SC duplex, 6’
Gateway, Router IP address traceability

For more information or a directory of sales offices: Phone: +1-800-701-5208 or +1-408-363-8000

info@sunr isetelecom.com I www.sunr isetelecom.com

© 2011 Sunrise Telecom Incorporated. All rights reserved. Specifications subject to change without notice. All product and company names are trademarks of their respective corporations.
Sunrise Telecom San Jose and Taiwan facilities are ISO 9001 certified. Do not reproduce, redistribute, or repost without written permission from Sunrise Telecom. SunLite GigE C_0080 Rev C01 July 28, 2011