This document provides the design criteria for a three-storey school building located in Hibago, Ocampo, Camarines Sur. It outlines the applicable codes and references, loadings including dead loads, live loads, wind loads and seismic loads. It also specifies the material strengths for structural steel, steel bolts and concrete. Finally, it lists the load combinations to be considered in the design.
This document provides the design criteria for a three-storey school building located in Hibago, Ocampo, Camarines Sur. It outlines the applicable codes and references, loadings including dead loads, live loads, wind loads and seismic loads. It also specifies the material strengths for structural steel, steel bolts and concrete. Finally, it lists the load combinations to be considered in the design.
This document provides the design criteria for a three-storey school building located in Hibago, Ocampo, Camarines Sur. It outlines the applicable codes and references, loadings including dead loads, live loads, wind loads and seismic loads. It also specifies the material strengths for structural steel, steel bolts and concrete. Finally, it lists the load combinations to be considered in the design.
This document provides the design criteria for a three-storey school building located in Hibago, Ocampo, Camarines Sur. It outlines the applicable codes and references, loadings including dead loads, live loads, wind loads and seismic loads. It also specifies the material strengths for structural steel, steel bolts and concrete. Finally, it lists the load combinations to be considered in the design.
DESIGN CRITERIA I. APPLICABLE CODES/REFERENCES 1. National Structural Code of the Philippines, Sixth Edition (NSCP 2010) 2. National Building Code of the Philippines 3. AISC Load Resistance Factor Design
II. LOADINGS 1. DEAD LOADS a. Concrete 24.00 kN/m3 b. Topping 1.15 kN/m2 c. Ceiling (acoustical Fiber board) 0.05 kN/m2 d. Electrical works 0.10 kN/m2 e. Machanical Duct Allowance 0.19 kN/m2 f. Parapet weight 0.93 kN/m2
2. LIVE LOADS 2 a. Classroom 1.92 kN/m b. Corridors 3.83 kN/m2 c. Offices 2.40 kN/m2
3. Wind Load 2 Applicable provisions for Zone 1 2 kN/m ( Wind Velocity = 250 kph )
4. SEISMIC LOAD Applicable provisions for Zone 4
Soil Profile type: SD
Seismic Source type : A
I 1.00 NSCP Table 208-1
Z 0.40 Seismic Zone Factor NSCP Table 208-3 Nv 1.00 Near Source Factor NSCP Table 208-5 Cv 0.64 Seismic Coefficient NSCP Table 208-8 R 8.50 Numerical Coefficient NSCP Table 208-11 Nₐ 1.00 Near Source Factor NSCP Table 208-4 Cₐ 0.44 Seismic Coefficient NSCP Table 208-7 III. MATERIAL STRENGTH Structural Steel: Beams, girders, columns Fy = 36 ksi Fu = 58 ksi
Structural Steel Bolts
Fu = 120 ksi Concrete: Base Plate f'c = 24 kn/m
IV. LOAD COMBINATIONS
a) 1.4DL b) 1.2DL + 1.6LL c) 1.2DL + 0.5LL WHERE: d) 1.2DL + 0.8WL E = ρEh + Ev e) 1.2DL + 0.5LL + 1.6WL assume ρ=1.1 f) 1.2DL + 0.5LL + 1E Ev = 0.5CaID g) 1.2DL + 0.5LL - 1E Eh= horizontal component of earthquake force h) 0.9DL + 1.6WL using lateral force procedure i) 0.9DL +1E Ev= Vertical Component of earthquake forces j) 0.9DL - 1E
