B.E. (Mechanical Engineering / Power Engineering) Sixth Semester (C.B.S.

)
Dynamics of Machines

P. Pages : 4 NIR/KW/18/3483/3509
Time : Three Hours *1293* Max. Marks : 80
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Solve Question 1 OR Questions No. 2.

rg
3. Solve Question 3 OR Questions No. 4.
4. Solve Question 5 OR Questions No. 6.
5. Solve Question 7 OR Questions No. 8.
6. Solve Question 9 OR Questions No. 10.

s.O
7. Solve Question 11 OR Questions No. 12.
8. Due credit will be given to neatness and adequate dimensions.
9. Assume suitable data whenever necessary.
10. Illustrate your answers whenever necessary with the help of neat sketches.

nt
11. Use of non programmable calculator is permitted.

1. a) Define gyroscopic couple with example. 3

due to wave with a velocity of 0.1 rad/sec.

OR
S

2. a) Define D’Alembert principle. 3

b) A four – wheel trolley car of mass 2500 kg runs on rails, which are 1.5 m apart and travels 10
around a curve of 30m radius at 24 km/hr. The rails are at the same level. Each wheel of the
trolley is 0.75m in diameter and each of the two axles is driven by a motor running in a
direction opposite to that of the wheels at speed of five times the speed of rotation of the
gp

wheels. The moment of inertia of each axle with gear and the wheels is 18kg − m2 . Each
motor with shaft and gear pinion has a moment of inertia of 12kg − m2 . The centre of
gravity of car is 0.9 m above the rail level. Determine the vertical force exerted by each
Na

wheel on the rails taking into consideration the centrifugal and gyroscopic effect state the
centrifugal and gyroscopic effects on the trolley.

3. For the figure 3 determine the drive torque required to be applied on crank O 2 A to 14
overcome an inertia effect of link AB having mass 4.2 kg, the centre of gravity at 330 mm
from ‘A’ and a mass moment of inertia 0.152kg − m2 .
O2A = 500mm, O4B = 560mm, O2O4 = 1000 mm, AB = 660 mm, W2 = 10.5rad/ s (c.c.w),
2 = 26 rad / s2 (c.w)

NIR/KW/18/3483/3509 1 P.T.O
 Acceleration of G3 as shown in figure 3 and angular acceleration 3 = 34.1rad / s2 (ccw) .

238º 3 B

A G3
ag3
W2

rg
60º
O2 O4
Figure : 3

s.O
OR

4. a) State and explain the conditions of static equilibrium for : 4

b)

nt
A cam mechanism has following particulars cam speed is 1100 rpm follower Stroke is
45 mm, cam angles for outstroke and return stroke are 145º and 85º respectively. Follower
10
de
motion is with uniform acceleration and retardation during outstroke and with SHM during
return stroke. Mass of the follower is 2.1 kg. Find out the necessary spring stiffness so as to
ensure the contact of the follower and cam throughout the cycle. Assume no preload on the
spring.
tu

5. a) Discuss the static and dynamic balancing in machines. 3

b) A, B, C & D are four masses carried by a rotating shaft of radii X mm, 160mm, 160mm and 10
S

180mm respectively. The planes in which the masses rotate are spaced at 425 mm apart and
magnitude of masses A, B, C, D are 8 kg, 10 kg, 6 kg and 2.5 kg respectively. Make the
system in complete dynamic balance condition by adjusting radius ‘X’mm and find (A)
ur

magnitude of radius X in mm (B) Relative angular position of masses A, B, C and D.

OR
gp

6. a) Discuss balancing of V – Engines. 3

b) An inside cylinder locomotive has its cylinder centre lines 0.7 m apart and has a stroke of 10
0.6 m. The rotating masses per cylinder are equivalent to 150 kg at the Crank pin, and the
Na

reciprocating masses per cylinder to 180 kg. The wheel centre lines are 1.5 m apart. The
cranks are at right angles. The whole of the rotating and 2/3 of the reciprocating masses are
to be balanced by masses placed at a radius of 0.6 m. Find the magnitude and direction of
the balancing masses. Find the fluctuation in rail pressure under one wheel, variation of
tractive effort and the magnitude of swaying couple at a crank speed of 300 rpm.

7. a) Derive equation for energy stored in flywheel. 3

NIR/KW/18/3483/3509 2
 b) The turning moment diagram of a four stroke engine may be assumed for the sake of 10
simplicity to be represented by four triangles in each stroke. Areas of these triangles are as
follows : Suction stroke = 5 10−5 m 2 , Compression stroke = 2110−5 m 2 , Expansion
stroke = 85 10−5 m 2 , Exhaust stroke = 8 10−5 m 2 . All the areas excepting expansion are
negative. Each m2 area represents 14 MN – m of work. Assuming resisting torque to be
constant, determine moment of inertia of the flywheel to keep the speed between 98 rpm
and 102 rpm.

OR

rg
8. a) What is function of governor? How it’s different from flywheel?

b) A Proell governor has equal arms of length 300 mm. The upper and lower ends of the arms

s.O
are pivoted on the axis of the governor. The extension arms of the lower links are each
80mm long and parallel to the axis when the radii of rotation of the balls are 150 mm and
200 mm. The mass of each ball is 10 kg and the mass of central load is 100 kg. Determine
the range of speed of the governor.

9. a) Explain in brief : 6

nt
i) Transmissibility
ii) Logarithmic decrement.
de
iii) Critical speed of shaft.

b) A rotor of mass 12kg is mounted in the middle of a 25mm diameter shaft supported between 7
two bearings placed at 900 mm from each other. The rotor is having 0.02 mm eccentricity.
If the system rotates at 3000 rpm. Determine the amplitude of the steady state vibration and
tu

the dynamic force on the bearing E = 200 GPa.

OR
S

10. a) The measurements on a mechanical vibrating system show that it has a mass of 8 kg and 8
that the springs can be combined to give an equivalent spring of stiffness 5.4 N/mm. If the
ur

vibrating system have a dashpot attached which exerts a force of 40 N when the mass has
velocity of 1 m/s. Find (i) critical damping coefficient (ii) damping factor (iii) logarithmic
decrement (iv) ratio of two consecutive amplitude.
gp

b) Determine natural frequency of the spring mass pulley system shown in figure 10 (b). 5
r
Na

M
K
m

x
Figure 10 (b)

NIR/KW/18/3483/3509 3 P.T.O
11. Determine the natural frequencies of torsional oscillation for the following system. The 14
system is a reciprocating I.C. Engine coupled to a centrifugal pump through a pair of gears.
The shaft from the flywheel of the engine to the gear wheel is of 60 mm diameter and 950
mm length. The shaft from the pinion to the pump is 40 mm diameter and 300 mm length.
The engine speed is 1 4 th of the speed pump. Moment of inertia of flywheel is
= 800kg −m2. Moment of inertia of gear wheel is 15kg −m2 . Moment of inertia of pinion
is 4kg −m2 . moment of inertia of the pump is 17 kg −m2. G = 84GN/ m2 .

rg
OR

12. Figure 12 shows two degrees of freedom system. Determine natural frequencies. 14
Where,

s.O
k1

m1

nt
x1

k2 k3
de
m2 x2

m1 = 3000 kg m 2 = 700 kg
tu

K1 = 8 106 N / m K 2 = K 3 = 13 106 N / m

***********
S
ur
gp
Na

NIR/KW/18/3483/3509 4