Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 272 views

    Sika® Latex PDF

    Uploaded by

    Gina Gaela

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sika® Latex PDF

    Uploaded by

    Gina Gaela
    272 views2 pages

    Original Title

    Sika® Latex.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    272 views2 pages

    Sika® Latex PDF

    Uploaded by

    Gina Gaela

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data Sheet

    Edition No. 04 (October 2015)


    SikaCem Bond

    SikaCem Bond
    (Formerly Sika® Latex)
    Bonding agent

    Product Description A synthetic rubber emulsion for addition to cement mortars where good adhesion
    and water resistance are required.
    Construction

    Uses SikaCem Bond is a high quality emulsion which substantially increases the
    qualities of cement mortars, such as:
     Thin layer patching mortars
     Rendering
     Floor screeds
     Concrete repair mortars
     Abrasion resistant lining
     Tile fixing mortars
     Masonry mortars
     Bonding agent between old and new concrete
    Characteristics / SikaCem bond is simply added to the mixing water to provide the following
    Advantages beneficial properties:
     Excellent adhesion
     Reduced shrinkage
     Greater elasticity
     Excellent water resistance
     Increased abrasion resistance
     Improved chemical resistance
     Non-toxic
    Note: SikaCem Bond does not re-emulsify, even in high alkaline conditions.
    Technical data
    Type Styrene butadiene liquid
    Color White
    Specific gravity Approx. 1.01 kg/L
    Storage Dry, cool, shaded place
    Shelf life 1 year if stored in unopened original container
    Packaging 20 kg can
    200 kg drum

    SikaCem Bond 1/2


    Instruction for use
    Dosage Added to the mixing water within the range of 1:1 – 1:4 depending on application.
    Consumption figures are given in the table:

    Latex : Water

    1:1 1:2 1:3 1:4


    w/c ratio 0.5 0.8 0.5 0.8 0.5 0.8 0.5 0.8
    1:1 2.3 3.0 1.5 2.1 1.1 1.5 0.9 1.2

    Cement : sand
    1:2 1.4 1.9 0.9 1.3 0.7 1.0 0.6 0.8
    1:3 1.1 1.5 0.7 1.0 0.5 0.8 0.4 0.6
    2
    Consumption of SikaCem Bond in kg/m per cm thickness
    Surface preparation Concrete surfaces should be clean, sound, and free from oil, grease, cement,
    laitance, and all loosely adhering particles.
    Construction

    Absorbent surfaces should be saturated thoroughly.


    Aggregates should be well-graded and thoroughly washed.
    Sand particle sizes should correspond to thickness of mortar to be applied and
    required surface finish.
    Thickness Sand size
    5 – 15 mm 0 – 3.0 mm
    Over 15 mm 0 – 7.0 mm
    Application For all applications a bonding coat of SikaCem Bond – water 1:1 mixed with
    cement and/or sand should be brushed into the prepared surface.
    Subsequent mortar application must be carried our whilst the bonding coat is still
    wet.
    Special notes Rendering, floor toppings should be allowed to cure correctly.
    Avoid excessive air-entrainment through over-mixing.
    Do not use SikaCem Bond as a bonding agent without adding cement.
    Handling precautions  Avoid contact with skin and eyes.
     Wear protective gloves and eye protection during work.
     If skin contact occurs, wash skin thoroughly.
     If in eyes, hold eyes open, flood with warm water and seek medical attention
    without delay.
    Legal notes The information, and, in particular, the recommendations relating to the
    application and end-use of Sika’s products, are given in good faith based on
    Sika’s current knowledge and experience of the products when properly stored,
    handled and applied under normal conditions. In practice, the differences in
    materials, substrates and actual site conditions are such that no warranty in
    respect of merchantability or of fitness for a particular purpose, nor any liability
    arising out of any legal relationship whatsoever, can be inferred either from this
    information, or from any written recommendations, or from any other advice
    offered. The proprietary rights of third parties must be observed. All orders are
    accepted subject of our terms and conditions of sale. Users should always refer to
    the most recent issue of the Product Data Sheet for the product concerned,
    copies of which will be supplied on request.

    Sika Philippines, Inc.


    888 Unit A & B,
    Marcos Alvarez Ave., Talon V, Tel. No.: +(632) 806-2875
    Las Piñas City 1747 Fax No.: +(632) 806-2883
    Philippines Website: phl.sika.com

    SikaCem Bond 2/2

    You might also like