Engineering Standard

Rolling Stock

Engineering Standard
ESR 0001-G

RSU APPENDIX G DRAWINGS

Version 1.1

Issued June 2010

Owner: Chief Engineer Rolling Stock

Approved Stephen White, Authorised Michael Uhlig,
by: Technical Specialist Rolling by: Manager
Stock Performance Standards, Rolling Stock Access Integrity
Rolling Stock Access Integrity
Disclaimer
This document was prepared for use on the RailCorp Network only.
RailCorp makes no warranties, express or implied, that compliance with the contents of this document shall be
sufficient to ensure safe systems or work or operation. It is the document user’s sole responsibility to ensure that the
copy of the document it is viewing is the current version of the document as in use by RailCorp.
RailCorp accepts no liability whatsoever in relation to the use of this document by any party, and RailCorp excludes
any liability which arises in any manner by the use of this document.
Copyright
The information in this document is protected by Copyright and no part of this document may be reproduced, altered,
stored or transmitted by any person without the prior consent of RailCorp.

UNCONTROLLED WHEN PRINTED Page 1 of 27

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

Document control

Revision Date Summary of change

Reformatted and renumbered ESR 0001-G, was RSU

1.0 June 2010
Appendix G.

1.1 June 2010 Missing dimensions in Drawings G13, G14 & G15 added.

Summary of changes from previous version

Summary of change Section

NOTE – If the final document is small enough for the ‘Contents’ and ‘Document control’
to fit on one page remove the page break between the existing pages 2 and 3.
HOWEVER if the ‘Document control’ page carries over to a second page separate
pages must be used for ‘Contents’ and ‘Document control’

© Rail Corporation Page 2 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

Contents

1 WPR 2000 Intersystem wide profile full 140 mm G1 ......................................................................4

2 WPR 2000 Intersystem wide profile full 130 mm G2 ......................................................................5
3 WPR 2000 Intersystem wide profile 7/8 140 mm G3 ......................................................................6
4 WPR 2000 Intersystem wide profile 7/8 130 mm G4 ......................................................................7
5 ANZR 1 Wheel profile (ROA Diagram 13-16) G5............................................................................8
6 Axle markings - ROA Diagram 6-2 G6 .............................................................................................9
7 Location of brake pipe (single brake pipe) ROA Diagram 7-12 G7 ...........................................10
8 Location of brake pipe (bifurcated) ROA Diagram 7-13 G8 ........................................................11
9 Standard location of end equipment ROA Diagram 13-12 G9 ....................................................12
10 Standard location of air connections at end ROA Diagram 13-13 G10 .....................................13
11 Standard wheel – nominal dimensions ROA Diagram 13-15 G11 ..............................................14
12 Freight wheel tread “No Go” profile gauge SRA Drawing 207-668 G12 .................................15
13 Flange height and thin flange gauge – controlling dimensions G13 ........................................15
14 Short flange gauge – controlling dimensions G14 ......................................................................16
15 Hollow tread gauge – controlling dimensions G15......................................................................16
16 Friction wedge height limit gauge – 50 tonne Ride Control bogies - ROA Diagram 17-3-9 G1617
17 Friction wedge height limit gauge – 70 and 100 tonne Ride Control bogies – ROA Diagram
17-3-10 G17 ...........................................................................................................................................18
18 Friction wedge height limit gauge – 50 tonne National bogies - ROA Diagram 17-3-11 G18 ..19
19 Friction wedge height limit gauge – 70 tonne National bogies– ROA Diagram 17-3-12 G19 ..20
20 Friction wedge height limit gauge – 50 tonne Barber bogies– ROA Diagram 17-3-14 G20.....21
21 Friction wedge height limit gauge – 70 tonne Barber bogies– ROA Diagram 17-3-15 G21.....22
22 Friction wedge height limit gauge – 100 tonne Barber bogies– ROA Diagram 17-3-16 G22...23
23 Measurement of friction wedge rise – 50 tonne Ride Control bogies– ROA Diagram 24-2-8
G23 .........................................................................................................................................................24
24 Measurement of friction wedge rise – 70 and 100 tonne Ride Control bogies– ROA Diagram
24-2-9 G24 .............................................................................................................................................25
25 Measurement of friction wedge rise – 50 tonne National bogies– ROA Diagram 24-2-10 G2526
26 Measurement of friction wedge rise – 70 tonne National bogies – ROA Diagram 24-2-11 G2627

© Rail Corporation Page 3 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

1 WPR 2000 Intersystem wide profile full 140 mm G1

50

Y Co-ordinates (mm)
40

30

20

10

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
X Co-ordinates (mm)

X Y X Y X Y X Y X Y X Y
0 31.365 19.7 0.959 28.9 15.104 38.75 24.576 48.75 26.864 67 28.642
0.2 25.855 20.2 1.185 29 15.374 39 24.673 49 26.901 67.5 28.674
0.7 21.074 20.7 1.44 29.25 15.99 39.25 24.767 49.25 26.937 68 28.705
1.2 17.913 21.2 1.726 29.5 16.538 39.5 24.858 49.5 26.972 68.5 28.736
1.7 15.38 21.7 2.045 29.75 17.034 39.75 24.946 49.75 27.007 69 28.766
2.2 13.211 22.2 2.4 30 17.489 40 25.032 50 27.041 69.5 28.795
2.7 11.287 22.7 2.796 30.25 17.91 40.25 25.114 50.25 27.075 70 28.832
3.2 9.544 23.2 3.239 30.5 18.302 40.5 25.194 50.5 27.108 70.5 28.851
3.7 7.961 23.7 3.735 30.75 18.669 40.75 25.271 51 27.172 71 28.878
4.2 6.769 24.2 4.295 31 19.014 41 25.345 51.5 27.233 72 28.929
4.7 5.843 24.7 4.935 31.25 19.339 41.25 25.416 52 27.292 73 28.979
5.2 5.075 25.2 5.679 31.5 19.647 41.5 25.484 52.5 27.351 74 29.029
5.7 4.416 25.7 6.568 31.75 19.939 41.75 25.55 53 27.409 75 29.079
6.2 3.842 26.2 7.686 32 20.217 42 25.613 53.5 27.465 76 29.129
6.7 3.333 26.3 7.961 32.25 20.481 42.25 25.673 54 27.521 77 29.179
7.2 2.881 26.4 8.236 32.5 20.733 42.5 25.731 54.5 27.575 78 29.229
7.7 2.476 26.5 8.51 32.75 20.973 42.75 25.786 55 27.629 79 29.279
8.2 2.113 26.6 8.785 33 21.202 43 25.839 55.5 27.682 80 29.329
8.7 1.787 26.7 9.06 33.25 21.422 43.25 25.891 56 27.733 81 29.379
9.2 1.495 26.8 9.335 33.5 21.632 43.5 25.942 56.5 27.784 82 29.429
9.7 1.234 26.9 9.609 33.75 21.833 43.75 25.992 57 27.834 83 29.479
10.2 1.002 27 9.884 34 22.025 44 26.042 57.5 27.883 84 29.529
10.7 0.797 27.1 10.159 34.25 22.209 44.25 26.091 58 27.93 85 29.579
11.2 0.618 27.2 10.434 34.5 22.385 44.5 26.14 58.5 27.977 87.5 29.704
11.7 0.463 27.3 10.708 34.75 22.554 44.75 26.188 59 28.023 90 29.829
12.2 0.331 27.4 10.983 35 22.716 45 26.235 59.5 28.068 92.5 29.954
12.7 0.222 27.5 11.258 35.25 22.87 45.25 26.281 60 28.112 95 30.079
13.2 0.136 27.6 11.533 35.5 23.019 45.5 26.327 60.5 28.155 97.5 30.204
13.7 0.071 27.7 11.807 35.75 23.16 45.75 26.372 61 28.197 100 30.329
14.2 0.027 27.8 12.082 36 23.297 46 26.417 61.5 28.238 102.5 30.454
14.7 0.004 27.9 12.357 36.25 23.43 46.25 26.461 62 28.279 105 30.579
15.2 0.002 28 12.632 36.5 23.56 46.5 26.504 62.5 23.318 110 31.079
15.7 0.02 28.1 12.906 36.75 23.868 46.75 26.547 63 28.357 115 31.579
16.2 0.06 28.2 13.181 37 23.808 47 26.589 63.5 28.396 120 32.079
16.7 0.121 28.3 13.456 37.25 23.928 47.25 26.63 64 28.433 125 32.579
17.2 0.203 28.4 13.731 37.5 24.044 47.5 26.671 64.5 28.47 130 33.079
17.7 0.308 28.5 14.005 37.75 24.156 47.75 26.711 65 28.506 134 33.479
18.2 0.435 28.6 14.28 38 24.266 48 26.75 65.5 28.541 136 35.479
18.7 0.585 28.7 14.555 38.25 24.372 48.25 26.789 66 28.575 138 37.479
19.2 0.759 28.8 14.83 38.5 24.476 48.5 26.827 66.5 28.609 140 39.479

© Rail Corporation Page 4 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

2 WPR 2000 Intersystem wide profile full 130 mm G2

50

Y Co-ordinates (mm) 40

30

20

10

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
X Co-ordinates (mm)

X Y X Y X Y X Y X Y X Y
0 31.365 19.7 0.959 28.9 15.104 38.75 24.576 48.75 26.864 67 28.642
0.2 25.855 20.2 1.185 29 15.374 39 24.673 49 26.901 67.5 28.674
0.7 21.074 20.7 1.44 29.25 15.99 39.25 24.767 49.25 26.937 68 28.705
1.2 17.913 21.2 1.726 29.5 16.538 39.5 24.858 49.5 26.972 68.5 28.736
1.7 15.38 21.7 2.045 29.75 17.034 39.75 24.946 49.75 27.007 69 28.766
2.2 13.211 22.2 2.4 30 17.489 40 25.032 50 27.041 69.5 28.795
2.7 11.287 22.7 2.796 30.25 17.91 40.25 25.114 50.25 27.075 70 28.823
3.2 9.544 23.2 3.239 30.5 18.302 40.5 25.194 50.5 27.108 70.5 28.851
3.7 7.961 23.7 3.735 30.75 18.669 40.75 25.271 51 27.172 71 28.878
4.2 6.769 24.2 4.295 31 19.014 41 25.345 51.5 27.233 72 28.929
4.7 5.843 24.7 4.935 31.25 19.339 41.25 25.416 52 27.292 73 28.979
5.2 5.075 25.2 5.679 31.5 19.647 41.5 25.484 52.5 27.351 74 29.029
5.7 4.416 25.7 6.568 31.75 19.939 41.75 25.55 53 27.409 75 29.079
6.2 3.842 26.2 7.686 32 20.217 42 25.613 53.5 27.465 76 29.129
6.7 3.333 26.3 7.961 32.25 20.481 42.25 25.673 54 27.521 77 29.179
7.2 2.881 26.4 8.236 32.5 20.733 42.5 25.731 54.5 27.575 78 29.229
7.7 2.476 26.5 8.51 32.75 20.973 42.75 25.786 55 27.629 79 29.279
8.2 2.113 26.6 8.785 33 21.202 43 25.839 55.5 27.682 80 29.329
8.7 1.787 26.7 9.06 33.25 21.422 43.25 25.891 56 27.733 81 29.379
9.2 1.495 26.8 9.335 33.5 21.632 43.5 25.942 56.5 27.784 82 29.429
9.7 1.234 26.9 9.609 33.75 21.833 43.75 25.992 57 27.834 83 29.479
10.2 1.002 27 9.884 34 22.025 44 26.042 57.5 27.883 84 29.529
10.7 0.797 27.1 10.159 34.25 22.209 44.25 26.091 58 27.93 85 29.579
11.2 0.618 27.2 10.434 34.5 22.385 44.5 26.14 58.5 27.977 87.5 29.704
11.7 0.463 27.3 10.708 34.75 22.554 44.75 26.188 59 28.023 90 29.829
12.2 0.331 27.04 10.983 35 22.716 45 26.235 59.5 28.068 92.5 29.954
12.7 0.222 27.5 11.258 35.25 22.87 45.25 26.281 60 28.112 95 30.079
13.2 0.136 27.6 11.533 35.5 23.019 45.5 26.327 60.5 28.155 97.5 30.204
13.7 0.071 27.7 11.807 35.75 23.16 45.75 26.372 61 28.197 100 30.329
14.2 0.027 27.8 12.082 36 23.297 46 26.417 61.5 28.238 102.5 30.454
14.7 0.004 27.9 12.357 36.25 23.43 46.25 26.461 62 28.279 105 30.579
15.2 0.002 28 12.632 36.5 23.56 46.5 26.504 62.5 28.318 110 31.079
15.7 0.02 28.1 12.906 36.75 23.686 46.75 26.547 63 28.357 115 31.579
16.2 0.06 28.2 13.181 37 23.808 47 26.589 63.5 28.396 120 32.079
16.7 0.121 28.3 13.456 37.25 23.928 47.25 26.63 64 28.433 124 32.479
17.2 0.203 28.4 13.731 37.5 24.044 47.5 26.671 64.5 28.47 126 34.479
17.7 0.308 28.5 14.005 37.75 24.156 47.75 26.711 65 28.506 128 36.479
18.2 0.435 28.6 14.28 38 24.266 48 26.75 65.5 28.541 130 39.479
18.7 0.585 28.7 14.555 38.25 24.372 48.25 26.789 66 28.575
19.2 0.759 28.8 14.83 38.5 24.476 48.5 26.827 66.5 28.609

© Rail Corporation Page 5 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

3 WPR 2000 Intersystem wide profile 7/8 140 mm G3

X Y X Y X Y X Y X Y X Y
0 31.365 19.7 3.064 27 18.127 37 25.019 47 26.933 67 28.676
0.2 25.855 20.2 3.56 27.25 18.494 37.25 25.096 47.5 26.997 67.5 28.703
0.7 21.074 20.7 4.12 27.5 18.839 37.5 25.17 48 27.058 68.5 28.754
1.2 17.913 21.2 4.76 27.75 19.164 37.75 25.241 48.5 27.117 69.5 28.804
1.7 15.38 21.7 5.504 28 19.472 38 25.309 49 27.176 70.5 28.854
2.2 13.211 22.2 6.393 28.25 19.764 38.25 25.375 49.5 27.234 71.5 28.904
2.7 11.287 22.7 7.511 28.5 20.042 38.5 25.438 50 27.29 72.5 28.954
3.2 9.544 22.8 7.786 28.75 20.306 38.75 25.498 50.5 27.346 73.5 29.004
3.7 7.961 22.9 8.061 29 20.558 39 25.556 51 27.4 74.5 29.054
4.2 6.769 23 8.335 29.25 20.798 39.25 25.611 51.5 27.454 75.5 29.104
4.7 5.843 23.1 8.61 29.5 21.027 39.5 25.664 52 27.507 76.5 29.154
5.2 5.075 23.2 8.885 29.75 21.247 39.75 25.716 52.5 27.558 77.5 29.204
5.7 4.416 23.3 9.16 30 21.457 40 25.767 53 27.609 78.5 29.254
6.2 3.842 23.4 9.434 30.25 21.658 40.25 25.817 53.5 27.659 79.5 29.304
6.7 3.333 23.5 9.709 30.5 21.85 40.5 25.867 54 27.708 80.5 29.354
7.2 2.881 23.6 9.984 30.75 22.034 40.75 25.916 54.5 27.755 81.5 29.404
7.7 2.476 23.7 10.259 31 22.21 41 25.965 55 27.802 84 29.529
8.2 2.113 23.8 10.533 31.25 22.379 41.25 26.013 55.5 27.848 86.5 29.654
8.7 1.787 23.9 10.808 31.5 22.541 41.5 26.06 56 27.893 89 29.779
9.2 1.495 24 11.083 31.75 22.695 41.75 26.106 56.5 27.937 91.5 29.904
9.7 1.234 24.1 11.358 32 22.844 42 26.152 57 27.98 94 30.029
10.2 1.002 24.2 11.632 32.25 22.985 42.25 26.197 57.5 28.022 96.5 30.154
10.7 0.797 24.3 11.907 32.5 23.122 42.5 26.242 58 28.063 99 30.279
11.2 0.618 24.4 12.182 32.75 23.255 42.75 26.286 58.5 28.104 101.5 30.404
11.7 0.463 24.5 12.457 33 23.385 43 26.329 59 28.143 103 30.479
12.2 0.331 24.6 12.731 33.25 23.511 43.25 26.372 59.5 28.182 105 30.579
12.7 0.222 24.7 13.006 33.5 23.633 43.5 26.414 60 28.221 110 31.079
13.2 0.136 24.8 13.281 33.75 23.753 43.75 26.455 60.5 28.258 115 31.579
13.7 0.071 24.9 13.556 34 23.869 44 26.496 61 28.295 120 32.079
14.2 0.133 25 13.83 34.25 23.981 44.25 26.536 61.5 28.331 125 32.579
14.7 0.26 25.1 14.105 34.5 24.091 44.5 26.575 62 28.366 130 33.079
15.2 0.41 25.2 14.38 34.75 24.197 44.75 26.614 62.5 28.4 134 33.479
15.7 0.584 25.3 14.655 35 24.301 45 26.652 63 28.434 136 35.479
16.2 0.784 25.4 14.929 35.25 24.401 45.25 26.689 63.5 28.467 138 37.479
16.7 1.01 25.5 15.199 35.5 24.498 45.5 26.726 64 28.499 140 39.479
17.2 1.265 25.75 15.815 35.75 24.592 45.75 26.762 64.5 28.53
17.7 1.551 26 16.363 36 24.683 46 26.797 65 28.561
18.2 1.87 26.25 16.859 36.25 24.771 46.25 26.832 65.5 28.591
18.7 2.225 26.5 17.314 36.5 24.857 46.5 26.866 66 28.62
19.2 2.621 26.75 17.735 36.75 24.939 46.75 26.9 66.5 28.648

© Rail Corporation Page 6 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

4 WPR 2000 Intersystem wide profile 7/8 130 mm G4

50

Y Co-ordinates (mm) 40

30

20

10

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
X Co-ordinates (mm)

X Y X Y X Y X Y X Y X Y
0 31.365 19.7 3.064 27 18.127 37 25.019 47 26.933 67 28.676
0.2 25.855 20.2 3.56 27.25 18.494 37.25 25.096 47.5 26.997 67.5 28.703
0.7 21.074 20.7 4.12 27.5 18.839 37.5 25.17 48 27.058 68.5 28.754
1.2 17.913 21.2 4.76 27.75 19.164 37.75 25.241 48.5 27.117 69.5 28.804
1.7 15.38 21.7 5.504 28 19.472 38 25.309 49 27.176 70.5 28.854
2.2 13.211 22.2 6.393 28.25 19.764 38.25 25.375 49.5 27.234 71.5 28.904
2.7 11.287 22.7 7.511 28.5 20.042 38.5 25.438 50 27.29 72.5 28.954
3.2 9.544 22.8 7.786 28.75 20.306 38.75 25.498 50.5 27.346 73.5 29.004
3.7 7.961 22.9 8.061 29 20.558 39 25.556 51 27.4 74.5 29.054
4.2 6.769 23 8.335 29.25 20.798 39.25 25.611 51.5 27.454 75.5 29.104
4.7 5.843 23.1 8.61 29.5 21.027 39.5 25.664 52 27.507 76.5 29.154
5.2 5.075 23.2 8.885 29.75 21.247 39.75 25.716 52.5 27.558 77.5 29.204
5.7 4.416 23.3 9.16 30 21.457 40 25.767 53 27.609 78.5 29.254
6.2 3.842 23.4 9.434 30.25 21.658 40.25 25.817 53.5 27.659 79.5 29.304
6.7 3.333 23.5 9.709 30.5 21.85 40.5 25.867 54 27.708 80.5 29.354
7.2 2.881 23.6 9.984 30.75 22.034 40.75 25.916 54.5 27.755 81.5 29.404
7.7 2.476 23.7 10.259 31 22.21 41 25.965 55 27.802 84 29.529
8.2 2.113 23.8 10.533 31.25 22.379 41.25 26.013 55.5 27.848 86.5 29.654
8.7 1.787 23.9 10.808 31.5 22.541 41.5 26.06 56 27.893 89 29.779
9.2 1.495 24 11.083 31.75 22.695 41.75 26.106 56.5 27.937 91.5 29.904
9.7 1.234 24.1 11.358 32 22.844 42 26.152 57 27.98 94 30.029
10.2 1.002 24.2 11.632 32.25 22.985 42.25 26.197 57.5 28.022 96.5 30.154
10.7 0.797 24.3 11.907 32.5 23.122 42.5 26.242 58 28.063 99 30.279
11.2 0.618 24.4 12.182 32.75 23.255 42.75 26.286 58.5 28.104 101.5 30.404
11.7 0.463 24.5 12.457 33 23.385 43 26.329 59 28.143 103 30.479
12.2 0.331 24.6 12.731 33.25 23.511 43.25 26.372 59.5 28.182 105 30.579
12.7 0.222 24.7 13.006 33.5 23.633 43.5 26.414 60 28.221 110 31.079
13.2 0.136 24.8 13.281 33.75 23.753 43.75 26.455 60.5 28.258 115 31.579
13.7 0.071 24.9 13.556 34 23.869 44 26.496 61 28.295 120 32.079
14.2 0.133 25 13.83 34.25 23.981 44.25 26.536 61.5 28.331 124 32.479
14.7 0.26 25.1 14.105 34.5 24.091 44.5 26.575 62 28.366 126 34.479
15.2 0.41 25.2 14.38 34.75 24.197 44.75 26.614 62.5 28.4 128 36.479
15.7 0.584 25.3 14.655 35 24.301 45 26.652 63 28.434 130 38.479
16.2 0.784 25.4 14.929 35.25 24.401 45.25 26.689 63.5 28.467
16.7 1.01 25.5 15.199 35.5 24.498 45.5 26.726 64 28.499
17.2 1.265 25.75 15.815 35.75 24.592 45.75 26.762 64.5 28.53
17.7 1.551 26 16.363 36 24.683 46 26.797 65 28.561
18.2 1.87 26.25 16.859 36.25 24.771 46.25 26.832 65.5 28.591
18.7 2.225 26.5 17.314 36.5 24.857 46.5 26.866 66 28.62
19.2 2.621 26.75 17.735 36.75 24.939 46.75 26.9 66.5 28.648

© Rail Corporation Page 7 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

5 ANZR 1 Wheel profile (ROA Diagram 13-16) G5

© Rail Corporation Page 8 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

6 Axle markings - ROA Diagram 6-2 G6

© Rail Corporation Page 9 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

7 Location of brake pipe (single brake pipe)

ROA Diagram 7-12 G7

© Rail Corporation Page 10 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

8 Location of brake pipe (bifurcated)

ROA Diagram 7-13 G8

© Rail Corporation Page 11 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

9 Standard location of end equipment

ROA Diagram 13-12 G9

© Rail Corporation Page 12 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

10 Standard location of air connections at end

ROA Diagram 13-13 G10

© Rail Corporation Page 13 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

11 Standard wheel – nominal dimensions

ROA Diagram 13-15 G11

© Rail Corporation Page 14 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

12 Freight wheel tread “No Go” profile gauge

SRA Drawing 207-668 G12

13 Flange height and thin flange gauge – controlling

dimensions G13

R9.5

35 R4

R2

70
4.5

13

24

Due to the introduction of the

WPR2000 wheel profile, these
dimensions have been
reduced by 1.5 mm to
Tolerance on Dimensions +/- 0.2 mm effectively maintain a 19 mm
minimum flange thickness.
All dimensions are in mm

© Rail Corporation Page 15 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

14 Short flange gauge – controlling dimensions G14

5 mm radius

5 mm

12 mm

10.5 mm 80 mm
5 mm radius

15 Hollow tread gauge – controlling dimensions G15

35 mm
0.5 mm

70 mm

120 mm
15mm

Tolerance on Dimensions +/- 0.2 mm

© Rail Corporation Page 16 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

16 Friction wedge height limit gauge – 50 tonne Ride Control

bogies - ROA Diagram 17-3-9 G16

© Rail Corporation Page 17 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

17 Friction wedge height limit gauge – 70 and 100 tonne Ride

Control bogies – ROA Diagram 17-3-10 G17

© Rail Corporation Page 18 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

18 Friction wedge height limit gauge – 50 tonne National

bogies - ROA Diagram 17-3-11 G18

© Rail Corporation Page 19 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

19 Friction wedge height limit gauge – 70 tonne National

bogies– ROA Diagram 17-3-12 G19

© Rail Corporation Page 20 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

20 Friction wedge height limit gauge – 50 tonne Barber

bogies– ROA Diagram 17-3-14 G20

© Rail Corporation Page 21 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

21 Friction wedge height limit gauge – 70 tonne Barber

bogies– ROA Diagram 17-3-15 G21

© Rail Corporation Page 22 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

22 Friction wedge height limit gauge – 100 tonne Barber

bogies– ROA Diagram 17-3-16 G22

© Rail Corporation Page 23 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

23 Measurement of friction wedge rise – 50 tonne Ride Control

bogies– ROA Diagram 24-2-8 G23

© Rail Corporation Page 24 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

24 Measurement of friction wedge rise – 70 and 100 tonne

Ride Control bogies– ROA Diagram 24-2-9 G24

© Rail Corporation Page 25 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

25 Measurement of friction wedge rise – 50 tonne National

bogies– ROA Diagram 24-2-10 G25

© Rail Corporation Page 26 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1

RailCorp Engineering Standard — Rolling Stock

RSU Appendix G Drawings ESR 0001-G

26 Measurement of friction wedge rise – 70 tonne National

bogies – ROA Diagram 24-2-11 G26

© Rail Corporation Page 27 of 27

Issued June 2010 UNCONTROLLED WHEN PRINTED Version 1.1