Low Power Stereo Series

2 x 8 Watt 8 Ohm
Class D
Audio Amplifier Board - TPA3110
(AA-AB32231)
Key Features: Electrical Specifications
·Output Power Specifications typical @ +25℃, Powered by 12V DC, unless otherwise noted. Specifications subject to change without notice.
8W@8Ohm 12V DC THD+N 10% Parameter Conditions Min. Typ. Max. Units
·
6W@8Ohm 12V DC THD+N 1% Power Supply - 10 12 24 VDC
·Power and Clip Indicator Idle Power
SD Floating, FAN ON - - - W
·Support Volume Control Board SD Floating, FAN OFF - 0.3 0.6 W
Standby Power SD Connected to GND, FAN OFF - 0.006 0.1 W
·Temperature Control Fan (Optional)
Maximum Current 16W @8Ohm - 1.54 - A
·Full Protection Efficiency 8W @ 8Ohm - 86.4 - %
·4-screw Easy Installation Minimum Load Impedance - - 3.2 - Ω
·Weight:54g/0.12 lbs (±10%) Switching Frequency SD Floating - 310 - KHz
Fan Active @ Temperature - - - - ℃
·Size:3.60inchX2.70inchX0.65inch
Audio Performance
Specifications typical @ +25℃, Powered by 12V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ. Max. Units
Environmental Gain - 24 25 26 dB
Input Sensitivity(RMS) @8Ω, 8W, 1KHz - 428 - mV
Conditions: Input Impedance - - 47 - KΩ
·Humidity: 5-85% RH Non-
@8Ω THD+N 1% - 6 - W
condensing Output Power
@8Ω THD+N 10% - 8 - W
·Operating Temperature Ambient: Bandwidth @ ±3dB @8Ω 20 - 20K Hz
0℃ to +55℃ THD @8Ω, 1W, 1KHz - 0.015 - %
·Storage Temperature: -40℃ to 85℃ Output Noise Level A-weighting,Input Connected to GND 94.8 - µV
SNR 6W @8Ω THD+N 1% -- 94 - dB

Typical Performance Graphs

All these boards are per-tested
with our power supply solution to
comply with FCC and CE. For all
customers who need those
information, please contact our
distributor or Sure Electronics.
RoHS compliant will need an MOQ
of 1000pcs per order.
Ready for:

All parameters were tested with Rohde & Schwarz UPV audio analyzer (AES17 filter enabled) and AP AUX0025 filter.
For authorized distributors and OEM customers who need more detailed performance graphs and parameter settings,
please send an inquiry e-mail to us. (Not available for retail customers)
Model Selection Guide Notes:
1. The output power is rated at the condition THD+N 10%,1kHz
Power sine wave.
Model Typical Amplifier
Output Power Supply Dimension
Number Load IC
Range 2. All amplifier boards don't employ power supply reverse polarity
AA-AB32131 2 X 2Watt DC6-12V 4Ω PAM8803 3"X2", #1 protection. Stresses beyond the power supply range maximum
AA-AB32232 2 X 10Watt DC7-15V 8Ω PAM8610 3"X2" ratings may cause permanent damage.
AA-AB32999 2 X 15Watt DC10-26V 4Ω PAM8615 3"X2" 3. None typical load may cause rating power reduction.
AA-AB32231 2 X 8Watt DC8-19V 8Ω TPA3110 3"X2"
AA-AB32233 2 X 10Watt DC7-18V 4Ω SSM3302 3.6"X2.7", #2 4. Dimensions mean length and width of PCB only, excluding
AA-AB32992 2 x 15Watt DC8-28V 4Ω MAX9736A 3.6"X2.7" excessive part out of the PCB outline.
AA-AB32993 2 X 15Watt DC10-28V 4Ω MP7740 3.6"X2.7"
5. All parameters were tested with Rohde & Schwarz UPV audio
AA-AB32996 2 X 15Watt DC8-26V 8Ω TPA3110 3.6"X2.7" analyzer (AES17 filter enabled) and AP AUX0025 filter. Linear
AA-AB32155 2 X 15Watt DC9-14V 4Ω TA2024 3.6"X2.7" Power Supply units were used for testing.
AA-AB32254 2 X 20Watt DC8-28V 8Ω MAX98400A 3.6"X2.7"
AA-AB32166 2 X 25Watt DC8-26V 6Ω TDA7492P 3.6"X2.7" 6. Sure Electronics promise all standard products life cycle more
than 5 years. Sure Electronics reserve the right to update the
AA-AB32165 2 X 25Watt*1 DC14-19V 6Ω TDA7492 4.8"X3.6", #3 version without notice. All the products sent to retail customers are
AA-AB32174 2 X 50Watt*1 DC8-26V 6Ω TDA7492 4.8"X3.6" the latest version. We will provide back-to-order service (100
AA-AB32179 2 X 50Watt DC8-26V 6Ω TDA7492 3.6"X2.7" Pieces MOQ needed) for our distributors in 5 years.
AA-AB32167 2 X 25Watt DC10-27V 4Ω TPA3123 3.6"X2.7"
7. Suggested power supply solution:
AA-AB32472 2 X 30Watt DC8-26V 8Ω TPA3118 3.6"X2.7"
Huntkey HKA02412020-8D 12V 2A 24W AC/DC Power Adapter
AA-AB32178 2 X 50Watt DC8-26V 4Ω TPA3116 3.6"X2.7" (PS-SP11502)
If you have other power supply requirements, please feel free to
Mechanical Dimensions contact us.

A A1 B B1 R
Dimension
(inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm)

#1 3.00/76.2 2.70/68.6 2.00/50.8 1.70/43.2 0.14/3.6

#2 3.60/91.4 3.30/83.8 2.70/68.6 2.40/61.0 0.14/3.6
#3 4.80/121.9 4.40/111.8 3.60/91.4 3.20/81.3 0.15/3.8

Notes:
· All dimensions are typical in inches (mm)
· Tolerance x.xx = ±0.02 (±0.50)
Height:
1)AA-AB32178, AA-AB32179: 0.94inch/23.9mm
2)AA-AB32174:1.53inch/37.5mm
3)AA-AB32165:0.94inch/23.1mm
Other models 0.65inch/16.5mm

Connections
Audio Input Connector:
Power Supply Connector: · J5 Jack 3.5mm
· J7 DC Jack 5.5mm/2.5mm . J1, J2 Terminal Block RJ128
· J6 Terminal Block RJ128 (optional)
(optional)
Pin Function
Pin Function
1 CH1
1 GND
2,3 GND
2 VCC
4 CH2
Shutdown
Control Connector: Speaker Output Connector:
· J8 Terminal Block RJ128 · J3, J4 Terminal Block RJ128
(optional)
Pin Function
Pin Function 1 OUT1+
1 GND 2 OUT1-
2 SD 3 OUT2-
4 OUT2+

Sure Electronics
Have Fun With Us!