2 X 50 Watt 6 Ohm Class D Audio Amplifier Board - TDA7492: Series
2 X 50 Watt 6 Ohm Class D Audio Amplifier Board - TDA7492: Series
2 X 50 Watt 6 Ohm Class D Audio Amplifier Board - TDA7492: Series
2 x 50 Watt 6 Ohm
Class D
Audio Amplifier Board - TDA7492
(AA-AB32174)
*the Fan is not available by default.
Key Features: Electrical Specifications
·Output Power Specifications typical @ +25℃, Powered by 24V DC, unless otherwise noted. Specifications subject to change without notice.
50W@6Ohm 24V DC THD+N 10% Parameter Conditions Min. Typ. Max. Units
·
39W@6Ohm 24V DC THD+N 1% Power Supply - 12 24 27 VDC
·Power and Clip Indicator Idle Power
SD Floating, FAN ON - 2.6 5 W
·Temperature Control Fan (Optional) SD Floating, FAN OFF - 1.7 3 W
Standby Power SD Connected to GND, FAN OFF - 0.7 1.5 W
·Full Protection
Maximum Current 100W @ 6Ohm - 4.63 - A
·Optimized Heatsink Design Efficiency 50W @ 6Ohm 88 - 93 %
·4-screw Easy Installation Minimum Load Impedance - - - - Ω
·Weight:272g/0.60 lbs (±10%) Switching Frequency SD Floating - 350 - KHz
Fan Active @ Temperature - - 50 - ℃
·Size:4.80inchX3.60inchX1.53inch
Audio Performance
Specifications typical @ +25℃, Powered by 24V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter Conditions Min. Typ. Max. Units
Environmental Gain - 20 21 22 dB
Input Sensitivity(RMS) @6Ω, 50W, 1KHz - 1658 - mV
Conditions: Input Impedance - - 22 - KΩ
·Humidity: 5-85% RH Non-
@6Ω THD+N 1% - 39 - W
condensing Output Power
@6Ω THD+N 10% - 50 - W
·Operating Temperature Ambient: Bandwidth @ ±3dB @6Ω 20 - 20K Hz
0℃ to +55℃ @6Ω, 1W, 1KHz - 0.041 - %
THD
·Storage Temperature: -40℃ to 85℃ @6Ω, 10W, 1KHz - 0.051 - %
Output Noise Level A-weighting,Input Connected to GND - 184.49 - µV
SNR 39W @6Ω THD+N 1% - 95.775 - dB
Ready for:
All parameters were tested with Rohde & Schwarz UPV audio analyzer (AES17 filter enabled) and AP AUX0025 filter.
For authorized distributors and OEM customers who need more detailed performance graphs and parameter settings,
please send an inquiry e-mail to us. (Not available for retail customers)
Notes:
Model Selection Guide 1. The output power is rated at the condition THD+N 10%,1kHz
Power sine wave.
Model Typical Amplifier
Output Power Supply Dimension
Number Load IC 2. All amplifier boards don't employ power supply reverse polarity
Range
AA-AB32131 2 X 2Watt DC6-12V 4Ω PAM8803 3"X2", #1 protection. Stresses beyond the power supply range maximum
ratings may cause permanent damage.
AA-AB32232 2 X 10Watt DC7-15V 8Ω PAM8610 3"X2"
AA-AB32999 2 X 15Watt DC10-26V 4Ω PAM8615 3"X2" 3. None typical load may cause rating power reduction.
AA-AB32231 2 X 8Watt DC8-19V 8Ω TPA3110 3"X2"
AA-AB32233 2 X 10Watt DC7-18V 4Ω SSM3302 3.6"X2.7", #2 4. Dimensions mean length and width of PCB only, excluding
excessive part out of the PCB outline.
AA-AB32992 2 x 15Watt DC8-28V 4Ω MAX9736A 3.6"X2.7"
AA-AB32993 2 X 15Watt DC10-28V 4Ω MP7740 3.6"X2.7" 5. All parameters were tested with Rohde & Schwarz UPV audio
AA-AB32996 2 X 15Watt DC8-26V 8Ω TPA3110 3.6"X2.7" analyzer (AES17 filter enabled) and AP AUX0025 filter. Linear
AA-AB32155 2 X 15Watt DC9-14V 4Ω TA2024 3.6"X2.7" Power Supply units were used for testing.
AA-AB32254 2 X 20Watt DC8-28V 8Ω MAX98400A 3.6"X2.7"
6. Sure Electronics promise all standard products life cycle more
AA-AB32166 2 X 25Watt DC8-26V 6Ω TDA7492P 3.6"X2.7" than 5 years. Sure Electronics reserve the right to update the
AA-AB32165 2 X 25Watt*1 DC14-19V 6Ω TDA7492 4.8"X3.6", #3 version without notice. All the products sent to retail customers are
AA-AB32174 2 X 50Watt*1 DC8-26V 6Ω TDA7492 4.8"X3.6" the latest version. We will provide back-to-order service (100
AA-AB32179 2 X 50Watt DC8-26V 6Ω TDA7492 3.6"X2.7" Pieces MOQ needed) for our distributors in 5 years.
AA-AB32167 2 X 25Watt DC10-27V 4Ω TPA3123 3.6"X2.7"
7. Suggested power supply solution:
AA-AB32472 2 X 30Watt DC8-26V 8Ω TPA3118 3.6"X2.7" Mean Well SE-100-24 AC/DC Single Output Switching Power
AA-AB32178 2 X 50Watt DC8-26V 4Ω TPA3116 3.6"X2.7" Supply 24V 4.5A 100W (PS-SP11512)
If you have other power supply requirements, please feel free to
contact us.
Mechanical Dimensions
A A1 B B1 R
Dimension
(inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm)
A A1 B B1 D
Dimensions
#1 3.00/76.2 2.70/68.6 2.00/50.8 1.70/43.2 0.14/3.6
(inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm)
#2 3.60/91.4 3.30/83.8 2.70/68.6 2.40/61.0 0.14/3.6
#1 4.80/121.92 4.40/111.76 3.60/91.44 3.20/81.28 0.14/3.60
#3 4.80/121.9 4.40/111.8 3.60/91.4 3.20/81.3 0.15/3.8
#2 6.00/152.40 5.60/142.24 4.50/114.3 4.10/104.14 0.14/3.60
Notes:
· All dimensions are typical in inches (mm)
· Tolerance x.xx = ±0.02 (±0.50)
Height:
1)AA-AB32178, AA-AB32179: 0.94inch/23.9mm
2)AA-AB32174:1.53inch/37.5mm
3)AA-AB32165:0.94inch/23.1mm
Other models 0.65inch/16.5mm
Connections
Sure Electronics
Have Fun With Us!