Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
59 views

A/t A1/t1+ (A/l-A1/l1) / (A2/l2-A1/l1) (A2/t2-A1/t1) (Linear Interpolation Formula)

This document contains linear interpolation formulas to calculate thickness to length (a/t) and height to thickness (h/t) ratios when the direct ratios are not listed in reference tables. It provides example calculations and comparisons to acceptance criteria in ASME VIII Div 2 2015 and Code Case 181 to evaluate the acceptability of flaws.

Uploaded by

phan hoang diep
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
59 views

A/t A1/t1+ (A/l-A1/l1) / (A2/l2-A1/l1) (A2/t2-A1/t1) (Linear Interpolation Formula)

This document contains linear interpolation formulas to calculate thickness to length (a/t) and height to thickness (h/t) ratios when the direct ratios are not listed in reference tables. It provides example calculations and comparisons to acceptance criteria in ASME VIII Div 2 2015 and Code Case 181 to evaluate the acceptability of flaws.

Uploaded by

phan hoang diep
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

a/t=a1/t1+(a/l-a1/l1)/(a2/l2-a1/l1)*(a2/t2-a1/t1)

(Linear interpolation formula)

Thick. 56
Heigth
Depth (d) Length (l) (a or 2a) Sur/Sub a/l (sizing)
29 26 4.7 SUBSURFACE 0.09
0

a/l (table) a/t (table)


Linear interpolation a/t when a/l not already in table
1st 0.05 0.038
2nd 0.10 0.043
a/t (table interpolation)= 0.042

h/t=h1/t1+(h/l-h1/l1)/(h2/l2-h1/l1)*(h2/t2-h1/t1)
(Linear interpolation formula)

Thick. 63.5
Depth (d) Length (l) Heigth (h) Sur/Sub h/l (sizing)
19 200 5 SUBSURFACE 0.03

h/l (table) h/t (table)


Linear interpolation h/t when h/l not already in table 51.00
1st 0.00 0.068
2nd 0.10 0.076
h/t (table interpolation)= 0.070
ASME VIII DIV. 2 2015
CREATED BY: PHAN HOANG DIEP

Thickness Between 25 mm and


less than or equal to 64 mm

Flaw Flaw
a/t (Actual sizing) ACC/REJ Aspec Ratio SURFACE Aspec Ratio
0.042 ACC a/l a/t a/l
0.00 0.031 0.00
0.05 0.033 0.05
0.10 0.036 0.10
0.15 0.041 0.15
0.20 0.047 0.20
0.25 0.055 0.25
0.30 0.064 0.30
0.35 0.074 0.35
0.40 0.083 0.40
0.45 0.085 0.45
0.50 0.087 0.50

t2-h1/t1) CODE CASE 181. 2012


SURFACE FLAW SUBSURFACE FLAW
25<=t<=64 25<=t<=64

Flaw Flaw
Aspec Ratio SURFACE Aspec Ratio SUBSURFACE
h/l h/t h/l h/t
h/t (Actual sizing) ACC/REJ 0.00 0.031 0.00 0.068
0.079 REJ 0.05 0.033 0.10 0.076
0.10 0.036 0.20 0.086
0.15 0.041 0.30 0.098
0.20 0.047 0.40 0.114
0.25 0.055 0.50 0.132
0.30 0.064 0.60 0.156
0.35 0.074 0.70 0.180
0.40 0.083 0.80 0.210
0.45 0.085 0.90 0.246
0.50 0.087 1.00 0.286
2 2015

25 mm and
to 64 mm

SUBSURFACE
a/t
0.034
0.038
0.043
0.054
0.066
0.078
0.090
0.103
0.116
0.129
0.143

You might also like