HSM18 04

P.A.
Hilton Ltd
Horsebridge Mill, King’s Somborne
Stockbridge, Hampshire, England, SO20 6PX
T: +44 (0) 1794 388382
PRODUCT DATA SHEET
F: +44 (0) 1794 388192
HSM18 – Electrical Resistance Strain Gauge
Product Summary Tender Specification

 Bench mounted, self contained apparatus  To introduce the electrical resistance strain gauge,
 Introduction to strain gauging. temperature compensation, bending and torsion
 Electrical resistance strain gauge bonded to measurement.
bending specimen face.  To be self contained apparatus including strain
 Orthogonal (at 45°) bonded strain gauges on meter.
torsional specimen.  An electrical resistance strain gauge fixed to the
 Temperature compensation catered for using top surface of an aluminium alloy cantilever.
dummy gauges.  To include a temperature compensation gauge.
 Aluminium cantilever for bending measurement.  To include a cantilever strain gauged for torsion
 Aluminium Torsion bar for torsion measurement. measurement.
 Wheatstone bridge technology.  To include comprehensive technical manual for
 Integral strain meter reading in micro-strain. student and lecturer provided.
 Label details Wheatstone bridge formation.  Set of weights and load hanger to be provided.
 All loading applied to specimens using load hanger  2 year warranty
and set of weights.
 Universal transformer with 15V Power supply and
power switch on unit.
 Quick connect terminals on top of unit.
 Balancing potentiometer on top of unit.
 Optionally available tension and compression test
specimens.
 110/120V AC, 60Hz or 220/240V AC 50Hz, single
phase, live neutral and earth operation.
 2 year warranty.
Page 1 of 3 HSM18
www.p-a-hilton.co.uk
The policy of P.A.Hilton Limited is one of continual improvement and they reserve the right to revise this
specification without notice.
P.A.Hilton Ltd
T: +44 (0) 1794 388382
PRODUCT DATA SHEET
F: +44 (0) 1794 388192
Description
The apparatus has been designed to illustrate the basic features of electrical resistance strain gauges and their
application to measurement of strain and the derivation of stress levels, in bending, torsion, tension and
compression.
An aluminium alloy cantilever has a single gauge bonded onto its surface, and an identical gauge is fixed to an
unstressed piece of the same material for temperature compensation. The two gauges form part of a
Wheatstone Bridge which has an apex or balancing potentiometer, and whose meter is calibrated directly in
micro-strains. The cantilever is loaded by weights hung from its free end and a load hanger is included.
To extend the scope of the apparatus the cantilever can be replaced by a torsion bar having two gauges bonded
orthogonally at 45º. Quick connect terminals on the top face of the unit allows for quick interchanging of
specimens.
A detailed label on the unit shows the Wheatstone Bridge arrangement and how the specimen strain gauges
connect into the circuit. The balance potentiometer is also positioned within the label to highlight is position
within the circuit. For a complete study of strain gauging two optional extra accessories demonstrate averaging
techniques for tension (HSM18T) and compression (HSM18C) specimens.
A complete instruction manual is provided describing the apparatus, its application, experimental procedure and
typical test results.
Experimental Capabilities
 To show the application of strain gauges in the measurement of stress
due to bending and torsion
 To demonstrate the use of Wheatstone bridge arrangements in
measuring change of resistance
 Visibly shows location of strain gauges within Wheatstone Bridge
arrangement and the position and use of balancing potentiometers
 With optional extras to show other methods of temperature
compensation in conjunction with tension and compression specimens
 Dummy, temperature compensation gauges
 Wiring of strain gauges
Specification Accessories and Spares

 Cantilever specimen: 25.4mm (wide) x
3.175mm (thick) x 229mm (long); aluminium  Full instruction manual which includes:
 Torsion tube: Ø9.52mm outside diameter x o Operating instructions
1.62mm wall thickness (16SWG); aluminium o Experimental set-up
 Single strain gauging o Experiment procedure
 Orthogonal strain gauging o Example set of results
 120ohm nominal strain gauge resistance
 Strain meter reading in microstrain (με)
 Wheatstone Bridge arrangement
 Balancing potentiometers
 Universal 15V Power supply used.
 Dimensions: 195(L) x 120(W) x 300(H) mm
 Weight: 2Kg including accessories
 2 year warranty
Page 2 of 3 HSM18
P.A.Hilton Ltd
T: +44 (0) 1794 388382
PRODUCT DATA SHEET
F: +44 (0) 1794 388192
Optional Extras
HSM18C – Compression Accessory
 A 40: 1 Lever on a fulcrum set in a bracket

 Pin ended compression specimens in brass and aluminium with a rectangular cross section
 Two active strain gauges and two transverse temperature correction gauges with separate leads
 2-year warranty.
Dimensions and Weights
Nett: 200 x 50 x 50 mm, 0.5 kg

Gross - approx. packed for export: 0.001 m³, 1.0 kg
HSM18T – Tension Accessory
 A 40: 1 Lever on an adjustable fulcrum

 Tensile specimen: 10mm (wide) x 0.91mm (thick) (20SWG)
 An anchor post
 Three shaped tension specimens in steel, brass and aluminium
 Two active strain gauges and two temperature compensation gauges on the unstressed tail of the test
piece
 2 year warranty
Operational Conditions
 Storage temperature: -10°C to +70°C
 Operating temperature range: +10°C to +50°C
 Operating relative humidity range: 0 to 95%, non condensing
Services Required
 110/120VAC 60HZ or 220/240V 50Hz, single phase, live neutral and earth
Page 3 of 3 HSM18

HSM18 04

Uploaded by

Copyright:

Available Formats

HSM18 04

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HSM18 04

Uploaded by

Copyright:

Available Formats

P.A.

HSM18 – Electrical Resistance Strain Gauge

Product Summary Tender Specification

Specification Accessories and Spares

HSM18C – Compression Accessory

 A 40: 1 Lever on a fulcrum set in a bracket

Dimensions and Weights

Nett: 200 x 50 x 50 mm, 0.5 kg

HSM18T – Tension Accessory

 A 40: 1 Lever on an adjustable fulcrum

You might also like