Heat pumps up to 2000 kW

Heating systems
Industrial systems
Refrigeration systems
 2/3

Futureproof and efficient heating technology

for all requirements

In industrialised Western nations, heat generation for residential and commercial buildings
accounts for the largest proportion of energy consumption – and therefore offers the
greatest savings potential. Advanced and energy efficient heating systems from Viessmann
are in use around the world, not only in many private households, but also in numerous
major international projects, where they make an important contribution to the sustainable
conservation of energy reserves.

Time and again, Viessmann successfully overcomes the most diverse challenges facing
manufacturers of advanced heating technology by offering innovative solutions – in historical
listed buildings, highly productive industrial complexes and the large scale residential and
commercial arena.

Viessmann has been developing and manufacturing heat pumps for international markets
for more than 35 years. Its product range includes customer-specific solutions and matching
services.
Contents
 4/5

Introduction
from page 6
Heating with renewable energy from the environment –
even in the higher output ranges

Vitocal range from page 8

Standardised control concept and optimised dimensions

complement Viessmann system design

System solutions from page 24

Viessmann offers heat pumps for a wide variety of applications

and different heat sources

Service, references from page 34

Viessmann guarantees that the components and assemblies in

its large heat pumps will work seamlessly together – from the
individual design process right through to maintenance.
Introduction
 6/7

eating with renewable energy from the

environment – even in the higher output ranges
Natural heat is an advanced and cost effective alternative to fossil fuels. It is available
free of charge and offers independence from oil and gas.

Heat pumps offer ideal conditions for reducing Recovering environmental energy
heating bills and achieving environmentally Various natural sources are suited to heat
responsible heat generation. After all, the recovery using a heat pump:
energy a heat pump uses is free and available
in unlimited supply from the environment. „ Water – such as groundwater, river or lake
water, waste water
With a heat pump, up to 80 percent of the „ Ground – via geothermal probes,
total energy demand can be drawn from nature geothermal collectors, energy piles
in a highly effective and environmentally „ Air
responsible manner. Only 20 to 30 percent „ Waste heat
electrical energy needs to be invested.
Not all of these heat sources can be used
The principle is as simple as it is ingenious: in all locations. It is therefore necessary to
the solar energy stored in the ambient air, consult the relevant authorities before making
ground and groundwater is used to efficiently a decision, and discuss the technical options
heat domestic hot water and heating water. with Viessmann.

Added value through cooling function and

dual mode systems
Heat pumps are also available with high
outputs and are designed to meet the energy
demand of larger residential complexes and
commercial operations. The operating mode
can be „reversed“, allowing the heat pump to Viessmann heat pumps are
be used for cooling in summer too. designed for larger residential
complexes and commercial
operations.
The idea that a heat pump only suits new
build projects is outdated. On the contrary,
if an existing conventional oil or gas heating
system is modernised or supplemented with
a heat pump (to form a dual mode system),
significant reductions in heating costs can be
achieved and emissions lowered at the same
time. Independence from fossil fuels actively
contributes to reducing CO2 emissions and
protecting the climate.
Vitocal 300-G/-W Pro

Vitocal 300-G Pro

Type BW 302.C140

Take advantage of these benefits

„ Brine/water heat pump, single and two-stage

Heating output: 89 to 240 kW, max. 1200 kW (as cascade)
„ Water/water heat pump, single and two-stage
Heating output: 112 to 290 kW, max. 1450 kW (as cascade)
„ Low running costs thanks to a high COP
(COP = coefficient of performance) to EN 14511 of up to 4.8 (brine 0 °C/water 35 °C)
and 6 (water 10 °C/water 35 °C)
„ Maximum flow temperature: 60 °C (brine 5 °C) for all sizes
„ Low noise and vibration emissions through sound-optimised appliance design
„ Low running costs with the highest level of efficiency at any operating point
Vitocal 300-G Pro through the innovative Refrigerant Cycle Diagnostic system (RCD) with electronic
Type BW 302.C110
expansion valve (EEV)
„ Easy to operate Vitotronic control unit with plain text and graphic display
„ Ready to use connection for fail-safe primary and secondary pumps
„ Electronic soft starter for lower starting current and less power drawn from the mains
„ Water/water version with stainless steel tubular evaporator for operation without an
intermediate circuit
„ Only 855 mm wide doorway required for delivery
„ Exceptionally quiet operation for this output range
„ Series with PLC-based Vitotronic for better integration in BMS systems
 8/9

Vitocal 300-G/-W Pro:

Brine/water and water/water heat pumps
These appliances are standardised, enabling quick and straightforward system
engineering, as well as transparent cost calculation parameters.

The Vitocal 300-G/-W Pro heat pumps up Proven and reliable technology
to 290 kW are in series production. The Pro The control philosophy was adopted from the
series features all the characteristics of the Vitocal series for detached and two-family
highly efficient Vitocal 300-G series. The seven houses. Here too, the Refrigerant Cycle
output sizes enable most requirements from Diagnostic system (RCD) checks efficiency
residential and commercial buildings to be continuously and safeguards reliable function
reliably met. These appliances are standardised, at any operating point through the interaction Easy to operate Vitotronic control
unit with plain text and graphic
enabling quick and comprehensive system between the electronic expansion valve (EEV)
display
engineering, as well as transparent cost and extensive sensor technology.
calculation parameters. Higher output levels
can be achieved by linking up to five Vitocal The Vitotronic 200 regulates up to three
300 Pro heat pumps in a single cascade. heating circuits and, thanks to its natural
cooling function, ensures a pleasant ambience
Space efficient design on hot summer days. With the optional
The hermetically sealed design with new Vitocom 300 communication module, a
scroll technology requires little space. At only comprehensive range of system optimisation
855 mm wide, with removable casing panels settings can be made from anywhere via
and a clearance at the bottom to enable it to internet or mobile phone.
be moved by pallet truck, the appliance is very
easy to handle. Series with PLC-based Vitotronic
All models are further available with a
Direct use of groundwater without an programmable logic controller (PLC). Data
intermediate circuit communication via Modbus/BACnet or LAN
Only the Vitocal 300-W Pro series, with its in particular provides options for even more
stainless steel tubular evaporator, provides targeted integration into BMS systems.
a reliable solution for the direct use of The PLC-based Vitotronic also allows
groundwater without an additional intermediate management of dry coolers and control of
circuit, thus minimising installation costs. up to three heating/cooling circuits.

Pre-assembled electrical equipment

The electrical equipment is already integrated
inside the heat pump casing. Factory-fitted
contactors for fail-safe primary and secondary
pumps, as well as protection for the
compressors, reduce installation effort
and ensure rapid heat pump installation.

Plant room in Manisa (Turkey) with five Vitocal 300-G Pro

heat pumps used for air conditioning
Specification

Vitocal 300-G Pro brine/water heat pump

Vitocal 300-G Pro Type BW 301.C090 BW 301.C120 BW 302.C090 BW 302.C110

Performance data
(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 86.6 111 82.8 106.6
Cooling capacity kW 68.9 88.7 65.8 84.6
Power consumption kW 18.7 23.5 17.9 23.2
Coefficient of performance ¡ in htg mode 4.6 4.7 4.6 4.6

Dimensions
Length mm 1343 1343 1343 1343
Width mm 911 911 911 911
Height mm 1650 1650 1650 1650

Weight kg 770 870 720 910

Number of compressors pce 1 1 2 2

Energy efficiency class LT/HT* A++/A++ A++/A++ A++/A++ A++/A++

Vitocal 300-G Pro Type BW 302.C140 BW 302.C180 BW 302.C230

Performance data
(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 134.6 173.2 222.0
Cooling capacity kW 106.6 137.6 177.4
Power consumption kW 29.3 37.3 47.0
Coefficient of performance ¡ in htg mode 4.6 4.6 4.7

Dimensions
Length mm 1932 1932 1932
Width mm 911 911 911
Height mm 1650 1650 1650

Weight kg 1180 1280 1425

Number of compressors pce 2 2 2

Energy efficiency class LT/HT* A++/A+ A++/A+ A++/A+

*LT for B0/W35 °C, HT for B0/W55 °C

Specification 10/11

Vitocal 300-W Pro water/water heat pump

Vitocal 300-W Pro Type WW 301.B125 WW 301.B155 WW 302.B125 WW 302.B155

Performance data
(to EN 14511, W10/W35 °C, 5 K spread)
Rated heating output kW 116 140.1 112.1 145.1
Cooling capacity kW 102 120 94.2 121.6
Power consumption kW 20.2 24.2 18.6 24.4
Coefficient of performance ¡ in htg mode 5.74 5.79 6.0 5.94

Dimensions
Length mm 1932 1932 1932 1932
Width mm 911 911 911 911
Height mm 1650 1650 1650 1650

Weight kg 1015 1055 1035 1060

Number of compressors pce 1 1 2 2

Energy efficiency class LT/HT* A++/A++ A++/A++ A++/A++ A++/A++

Vitocal 300-W Pro Type WW 302.B200 WW 302.B250 WW 302.B300

Performance data
(to EN 14511, W10/W35 °C, 5 K spread)
Rated heating output kW 186 240 290
Cooling capacity kW 157 199 244
Power consumption kW 32.1 42.1 49.5
Coefficient of performance ¡ in htg mode 5.9 5.7 5.8

Dimensions
Length mm 2521 2521 2521
Width mm 911 911 911
Height mm 1650 1650 1650

Weight kg 1330 1380 1425

Number of compressors pce 2 2 2

Energy efficiency class LT/HT* A++/A++ A++/A++ A++/A++

*LT for B0/W35 °C, HT for B0/W55 °C

Vitocal 350-G Pro

Vitocal 350-G Pro

Type BW 352.A156

Take advantage of these benefits

„ Brine/water heat pump, two-stage

Heating output: 27 to 197 kW
„ High flow temperatures: up to 73 °C
„ Low running costs thanks to a high COP (COP = coefficient of performance) to EN 14511
of up to 4.4 (brine 0 °C/water 35 °C)
„ Viable under partial load conditions due to the use of two or three compressors with an
equal rating
„ Low noise and vibration emissions through sound-optimised appliance design
„ Intuitive operation of the control unit via touchscreen with schematics
Vitocal 350-G Pro „ Possibility of factory pre-installation in the case of project-related manufacture
Type BW 352.A156
„ Provided with standard part-winding start-up system for low starting currents or fitted
with an optional electronic soft starter
„ Conventional cooling/heating function with heating water buffer cylinder
„ PLC-based Vitotronic with Modbus and BACnet communication interface
 12/13

Vitocal 350-G Pro:

Brine/water heat pump up to 73 °C
The Vitocal 350-G Pro extends the heat pump output range from
27 to 197 kW.

The frame design of the brine/water heat Remote monitoring and communication
pump makes the powerful and efficient The control unit recognises numerous data
Vitocal 350-G Pro heat pump easier to handle communication options. From a simple
and install. The sound insulated casing analogue modem to a LAN-based system:
(supplied separately) offers a snug fit and Modbus technology and BACnet can be
reduces the transport weight by around used to enable the system to be accessed
200 kg. The unit is ideal for modernising via the internet for remote maintenance and
heating systems with high flow temperatures. communication purposes. Large colour touchscreen with clear
display

Hygienic DHW heating Appliance design optimised for quiet

With high flow temperatures of up to 73 °C, operation
the Vitocal 350-G Pro series meets the As is the case for all heat pumps, the
requirements for hygienic DHW heating. compressors generate noise in the 50 to
The special temperature maintaining facility 60 Hz range. Due to the very high quality
guarantees hot inlet temperatures at all times, construction of the appliance frame and sound
even during the loading cycle. insulation, it has been possible to compensate
for any noise within the casing.
Reliable technology and straightforward
operation Vibrations on the base support are barely
Lying at the heart of the refrigerant circuit are perceptible, as the 3D anti-vibration design
German-manufactured semi-hermetic piston is specifically constructed to dissipate
compressors. Depending on performance, vibrations. With a sound power level of
two or three compressors are integrated into 65 dB(A) for the 197 kW heat pump, it offers
the refrigerant circuit by way of a compound great value in comparison to the other
connection. This guarantees high levels of products available in this market segment.
efficiency, even in partial load operation.
Optional factory-fitted equipment
Efficiency is enhanced by electronic injection The electrical equipment is already fully
valves which are self-closing at zero volt integrated inside the heat pump. The
to ensure maximum safety if there is a contactors for the circulation pumps are
power failure, for example. Additionally, the prefitted and easily accessible. If requested by
hermetically sealed design with fewer t the customer, assemblies for optional function
hreaded connections, and the absence of extensions can be ordered from the factory.
safety valves in the refrigerant circuit, For example, electronic soft starters, which
guarantee tightness and a long service life. further improve on the low starting currents
of the part-winding function.
For optimal control of the system and
refrigerant circuit, the Vitocal 350-G Pro
features a PLC-based Vitotronic. The large
graphic touchscreen enables intuitive
operation. Its full colour mode highlights the
different way that functions and operation
are displayed.
Specification

Vitocal 350-G Pro brine/water heat pump

Vitocal 350-G Pro Type BW 352.A027/ BW 352.A034/ BW 352.A056/ BW 352.A076/ BW 352.A097/

Type BW 352.A027SA BW 352.A034SA BW 352.A056SA BW 352.A076SA BW 352.A097SA

Performance data
(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 27.2 34.3 56.1 76 96.9
Cooling capacity kW 20.8 26.4 43.2 58.8 74.6
Power consumption kW 6.4 7.9 12.8 17.3 21.9
Coefficient of performance ¡in heating mode 4.2 4.4 4.4 4.4 4.4

Performance data*
(to EN 14511, W10/W35 °C, 5 K spread)
Rated heating output kW 37.1 47.8 78.6 106 134.1
Cooling capacity kW 29.7 39 64.2 85.9 109.6
Power consumption kW 7.4 8.8 14.5 19.6 24.6
Coefficient of performance ¡ in heating mode 5 5.4 5.4 5.4 5.5

Dimensions
Length mm 1848 1848 1848 2153 2153
Width (excl. anti-vibration fittings (casing)) mm 820 (750) 820 (750) 820 (750) 911 (850) 911 (850)
Height mm 1450 1450 1450 1650 1650

Weight kg 555 672 723 963 1065

Number of compressors pce 2 2 2 2 2

+ + + + ++ + ++ +
Energy efficiency class LT/HT** A /A A /A A /A A /A A /A+
++

Types BW 352.A027SA to BW 353.A198SA come fitted as standard with electronic soft starters with integral rotary field monitoring
* In W/W operation with intermediate circuit
** LT for B0/W 35 °C, HT for B0/W 55 °C
 14/15

Vitocal 350-G Pro Type BW 352.A114/ BW 352.A132/ BW 352.A156/ BW 353.A172/ BW 353.A198/

Type BW 352.A114SA BW 352.A132SA BW 352.A156SA BW 353.A172SA BW 353.A198SA

Performance data
(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 114.2 131.9 155 170.2 197
Cooling capacity kW 88.4 101.5 119.2 132 153.3
Power consumption kW 25.9 30.4 36.3 38.4 45.7
Coefficient of performance ¡ in heating mode 4.4 4.3 4.3 4.4 4.4

Performance data*
(to EN 14511, W10/W35 °C, 5 K spread)
Rated heating output kW 158 181.9 214.4 237 274.2
Cooling capacity kW 129 148 173.8 193.5 222.8
Power consumption kW 29 34.1 40.7 44.2 52
Coefficient of performance ¡ in heating mode 5.4 5.3 5.3 5.4 5.3

Dimensions
Length mm 2153 2153 2153 2816 2816
Width (excl. anti-vibration fittings (casing)) mm 911 (850) 911 (850) 911 (850) 911 (850) 911 (850)
Height mm 1650 1650 1650 1650 1650

Weight kg 1113 1209 1260 1604 1678

Number of compressors pce 2 2 2 3 3

++ + ++ + ++ + ++ +
Energy efficiency class LT/HT** A /A A /A A /A A /A A /A+
++

Types BW 352.A027SA to BW 353.A198SA come fitted as standard with electronic soft starters with integral rotary field monitoring
* In W/W operation with intermediate circuit
** LT for B0/W 35 °C, HT for B0/W 55 °C
Vitocal 350-G Pro

Vitocal 350-G Pro

Type BW 352.AS1190SAH

Take advantage of these benefits

„ Brine/water heat pump

Heating output, single stage: 223 to 564 kW (B0/W35 °C)
Heating output, two-stage: 433 to 1128 kW (B0/W35 °C)
„ Cooling capacity, single stage: 417 to 661 kW (W7/W35 °C)
Cooling capacity, two-stage: 491 to 1322 kW (W7/W35 °C)
„ EER (= energy efficiency ratio) W7/W35 °C at 5.02
„ Low running costs thanks to a high COP
(COP = coefficient of performance) to EN 14511 of up to 4.71 (brine 0 °C/water 35 °C)
Vitocal 350-G Pro „ Maximum flow temperature: 65 °C
Type BW 352.AS1190SAH
„ Low pressure drop in operation with higher flow temperatures
(e.g. at FT 65 °C only up to 10 % pressure drop compared with FT 35 °C)
„ Optional sound insulation set for noise reduction of 8 to 10 dB(A)
„ 10 bar pressure stage (secondary) for industrial applications
„ Menu-guided assistant with user prompts for straightforward commissioning
„ Factory testing of output and function
 16/17

Vitocal 350-G Pro:

Brine/water heat pump up to 65 °C
Brine/water heat pump and liquid cooled chiller unit
with compact rotary screw compressors.

The Vitocal 350-G Pro with compact rotary Comprehensive equipment level and
screw compressors is a heat pump straightforward operation
manufactured in series with heating output The machine's control is supported by a
ratings above 1 MW and cooling capacities of PLC-based Vitotronic. Intuitive operation
up to 1490 kW. All models are available with of the 5.7 inch colour touchscreen allows
different compressors, which offer various parameter settings to be made quickly. The
benefits depending on application. touch function can also be used to directly
access a visualised display of the scheme
Single and two-stage versions and the internal refrigerant circuit. System
from 223 to 1128 kW data can be automatically saved up to 14 days Single stage version of the
Vitocal 350-G Pro with a heating
The single stage version covers heating retroactively.
output of 564 kW
output ratings up to 564 kW. A refrigerant
circuit with optimised design is equipped As an extended means of control, a Modbus
with large area plate heat exchangers on both interface can be used to provide external
the evaporator and condenser sides. Integral cascade control or for other options. To
output control is possible in stages of 25, 50, prevent any liquid evaporator medium from
75 and 100 percent. reaching the compressor in the event of a
power failure, all Vitocal 350-G Pro appliances
Two-stage version are equipped with a separate power pack.
The two-stage version (up to 1128 kW) This reliably closes the injection valves and
features two refrigerant circuits that work shuts down the machine in a controlled way.
separately, but that are supplied via a joint
tubular evaporator. Optional accessories
The standard heat pumps comprise a modular
The particularly efficient single-pass version frame design with a mounted control panel.
optimises evaporation temperatures. One Sound insulation sets are available as retrofit
four-stage output control unit per refrigerant option.
circuit enables eight partial loads of 12.5 up
to 100 percent. The machines can also be ordered with an
electronic soft starter.
Through balancing control, virtually identical
compressor runtimes are achieved, thereby
reducing maintenance cycles.
Specification

Vitocal 350-G Pro brine/water heat pump

with compact rotary screw compressor (single stage)

Compressor version: Hanbell Type BW 351.AS240SDH BW 351.AS260SDH BW 351.AS300SDH BW 351.AS330SDH BW 351.AS350SDH

Type BW 351.AS240SAH BW 351.AS260SAH BW 351.AS300SAH BW 351.AS330SAH BW 351.AS350SAH

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 223 246 280 305 333
Cooling capacity kW 175 193 220 239 262
Power consumption kW 49 55 62 68 73
Coefficient of performance ¡ in heating mode 4.55 4.48 4.54 4.50 4.55

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 259 285 325 353 387
Rated heating output kW 311 344 390 426 465
Power consumption kW 54 60 68 74 80
Energy efficiency ratio ¡ in cooling mode 4.82 4.72 4.80 4.74 4.81

Compressor version: Hanbell Type BW 351.AS390SDH BW 351.AS440SDH BW 351.AS490SDH BW 351.AS520SDH BW 351.AS600SDH

Type BW 351.AS390SAH BW 351.AS440SAH BW 351.AS490SAH BW 351.AS520SAH BW 351.AS600SAH

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 368 422 464 494 564
Cooling capacity kW 288 334 367 390 448
Power consumption kW 82 91 100 107 120
Coefficient of performance ¡in heating mode 4.49 4.66 4.64 4.62 4.71

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 426 493 541 576 661
Rated heating output kW 513 590 648 690 789
Power consumption kW 90 100 110 118 132
Energy efficiency ratio ¡ in cooling mode 4.73 4.95 4.93 4.9 5.02

Compressor version: Bitzer Type BW 351.AS240SDB BW 351.AS260SDB BW 351.AS300SDB BW 351.AS330SDB

Type BW 351.AS240SAB BW 351.AS260SAB BW 351.AS300SAB BW 351.AS330SAB

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 216 245 273 305
Cooling capacity kW 169 191 213 238
Power consumption kW 49 55 62 68
Coefficient of performance ¡in heating mode 4.43 4.45 4.43 4.51

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 245 278 307 351
Rated heating output kW 296 335 371 423
Power consumption kW 52 58 66 74
Energy efficiency ratio ¡ in cooling mode 4.73 4.8 4.63 4.74

Compressor version: Bitzer Type BW 351.AS390SDB BW 351.AS440SDB BW 351.AS490SDB BW 351.AS520SDB

Type BW 351.AS390SAB BW 351.AS440SAB BW 351.AS490SAB BW 351.AS520SAB

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 362 411 469 527
Cooling capacity kW 283 322 370 416
Power consumption kW 82 91 100 115
Coefficient of performance ¡in heating mode 4.43 4.54 4.69 4.6

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 417 473 546 614
Rated heating output kW 501 569 652 732
Power consumption kW 87 99 110 122
Energy efficiency ratio ¡ in cooling mode 4.81 4.8 4.98 5.04
Specification 18/19

Vitocal 350-G Pro brine/water heat pump

with compact rotary screw compressor (two-stage)

Compressor version: Hanbell Type BW 352.AS470SDH BW 352.AS520SDH BW 352.AS600SDH BW 352.AS650SDH BW 352.AS710SDH

Type BW 352.AS470SAH BW 352.AS520SAH BW 352.AS600SAH BW 352.AS650SAH BW 352.AS710SAH

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 445 493 559 610 666
Cooling capacity kW 351 386 440 478 524
Power consumption kW 98 110 123 135 146
Coefficient of performance ¡in heating mode 4.55 4.48 4.54 4.50 4.55

Performance data: cooling

(to EN 14511, W12-7/W30-35)
Rated cooling capacity kW 518 570 650 707 774
Rated heating output kW 622 687 781 851 930
Power consumption kW 108 120 135 149 161
Energy efficiency ratio ¡ in cooling mode 4.82 4.72 4.80 4.74 4.81

Compressor version: Hanbell Type BW 352.AS760SDH BW 352.AS900SDH BW 352.AS980SDH BW 352.AS1050SDH BW 352.AS1190SDH

Type BW 352.AS760SAH BW 352.AS900SAH BW 352.AS980SAH BW 352.AS1050SAH BW 352.AS1190SAH

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 735 844 927 988 1128
Cooling capacity kW 576 668 733 781 896
Power consumption kW 164 181 200 214 240
Coefficient of performance ¡in heating mode 4.49 4.66 4.64 4.62 4.71

Performance data: cooling

(to EN 14511, W12-7/W30-35)
Rated cooling capacity kW 851 986 1083 1153 1322
Rated heating output kW 1026 1180 1296 1381 1577
Power consumption kW 180 199 220 235 263
Energy efficiency ratio ¡ in cooling mode 4.73 4.95 4.93 4.9 5.02

Compressor version: Bitzer Type BW 352.AS470SDB BW 352.AS520SDB BW 352.AS600SDB BW 352.AS650SDB

BW 352.AS470SAB BW 352.AS520SAB BW 352.AS600SAB BW 352.AS650SAB

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 433 490 546 614
Cooling capacity kW 338 383 426 475
Power consumption kW 98 110 124 139
Coefficient of performance ¡in heating mode 4.42 4.45 4.41 4.38

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 491 557 613 702
Rated heating output kW 592 669 741 846
Power consumption kW 104 116 132 148
Energy efficiency ratio ¡ in cooling mode 4.73 4.8 4.63 4.74

Compressor version: Bitzer Type BW 352.AS760SDB BW 352.AS900SDB BW 352.AS980SDB BW 352.AS1050SDB

Type BW 352.AS760SAB BW 352.AS900SAB BW 352.AS980SAB BW 352.AS1050SAB

Performance data: heating

(to EN 14511, B0/W35 °C, 5 K spread)
Rated heating output kW 725 823 938 1055
Cooling capacity kW 566 644 739 832
Power consumption kW 163 184 205 229
Coefficient of performance ¡in heating mode 4.44 4.47 4.57 4.60

Performance data: cooling

(to EN 14511, W12-7/W30-35 °C)
Rated cooling capacity kW 834 947 1092 1228
Rated heating output kW 1003 1138 1305 1464
Power consumption kW 174 187 219 244
Energy efficiency ratio ¡ in cooling mode 4.81 4.80 4.98 5.04
Vitocal 350-HT Pro

Vitocal 350-HT Pro

56.6 to 144.9 kW

Take advantage of these benefits

„ Brine outputs: 56.6 to 144.9 kW at B0/W35 °C, 148 to 390 kW at B50/W90 °C

„ COP at B0/W35 °C: up to 4.3
COP at B50/W90 °C: up to 3.4
„ Maximum flow temperature: 90 °C
„ High permissible primary source temp. up to 50 °C: optimum utilisation of waste heat
„ Sound power level: < 66 dB(A)
„ 91 cm standard width
„ PLC control unit, intuitive operation via colour touchscreen
„ HFO refrigerant: R1234ze, GWP 1
„ 10 bar pressure stage for industrial applications
„ Menu-guided assistant with user prompts for straightforward commissioning
„ Factory tests at operating temperature including function and output
„ Automatic tightness monitoring for lower service costs
„ Wide application range through secondary temperatures up to 90 °C (no booster heater required)
„ High sustainability due to futureproof refrigerant
„ Low running costs with the highest level of efficiency at any operating point through the
innovative Refrigerant Cycle Diagnostic system (RCD) with electronic expansion valve (EEV)
 20/21

Vitocal 350-HT Pro:

Brine/water heat pump up to 90 °C
High temperature heat pump for utilisation of waste heat in renewable heat
for the commercial sector

The use of renewable heat in commercial Remote monitoring and communication

applications is determined by the need In addition, the control unit features many
for high flow temperatures. The new communication options. LAN-supported
Vitocal 350-HT Pro heat pump extends systems as well as Modbus and BACnet
the comprehensive product range from interfaces can be used. These make the
Viessmann. system accessible for remote monitoring
and integration into building management
Heat pump with flow temperatures systems.
up to 90 °C
As a heat pump from standard production, The 5.7 inch colour touchscreen offers Automatic tightness monitoring,
gas detector
the Vitocal 350-HT Pro series delivers flow intuitive operation and easy control.
temperatures up to 90 °C and utilises heat
source temperatures up to 50 °C. This makes
it particularly suitable for the utilisation of
waste heat and for the generation of high
temperatures for industrial and commercial
processes, or for older local heating networks.

New refrigerant meets more stringent

requirements
The use of the new HFO refrigerant, R1234ze,
means that this series of appliances already
meets the refrigerant regulations set for
2020 and beyond. The GWP (global warming
potential) is in the single-figure range and
is therefore almost as low as that of natural
refrigerants.

Easy to operate PLC control unit with colour touchscreen

Product cross-section
Vitocal 350-HT Pro

6
1 4 2
4
4

5
6

7
7
7

Vitocal 350-HT Pro

1 COP booster through internal

heat exchanger
2 PLC control unit with colour touchscreen
3 Circulator
4 Pressure monitoring
5 Refrigerant collector for large temperature
application range
6 Condenser/evaporator
7 Piston compressor
8 Highly attenuating sound insulation
9 Anti-vibration measures
Specification 22/23

Vitocal 350-HT Pro waste heat pump

Vitocal 350-HT Pro Type BW 352.AHT058 352.AHT071 352.AHT084

Number of compressors 2 2 2
Compressor type Piston Piston Piston
Performance data
to EN 14511, B0/W35 °C, 5 K spread
Rated heating output 56.6 72.4 83.2
Cooling capacity 43.4 55.4 63.6
Power consumption 13.2 17.0 19.6
Coefficient of performance ¡ 4.3 4.3 4.2
Performance data
to EN 14511, B45/W80 °C, 10 K spread
Rated heating output kW 163.0 213.9 245.9
Cooling capacity kW 124.8 164.1 187.9
Power consumption kW 38.2 49.8 58.0
Coefficient of performance ¡ 4.3 4.3 4.2
Performance data
to EN 14511, B50/W90 °C, 10 K spread
Rated heating output kW 148.0 194.3 222.9
Cooling capacity kW 104.6 137.5 157.5
Power consumption kW 43.4 56.8 65.4
Coefficient of performance ¡ 3.4 3.4 3.4
Dimensions
Length mm 2153 2153 2153
Width mm 911 911 911
Height mm 1650 1650 1650
Weight kg 1077 1195 1251

Vitocal 350-HT Pro Type BW 352.AHT096 352.AHT119 353.AHT126 353.AHT147

Number of compressors 2 2 3 3
Compressor type Piston Piston Piston Piston
Performance data
to EN 14511, B0/W35 °C, 5 K spread
Rated heating output 96.6 116.8 124.8 144.9
Cooling capacity 73.4 88.4 95.4 110.1
Power consumption 23.2 28.4 29.4 34.8
Coefficient of performance ¡ 4.2 4.1 4.2 4.2
Performance data
to EN 14511, B45/W80 °C, 10 K spread
Rated heating output kW 285.5 328.1 370.6 428.3
Cooling capacity kW 216.1 248.3 281.8 324.2
Power consumption kW 69.4 79.8 88.8 104.1
Coefficient of performance ¡ 4.1 4.1 4.2 4.1
Performance data
to EN 14511, B50/W90 °C, 10 K spread
Rated heating output kW 260.0 294.3 337.4 390.0
Cooling capacity kW 181.6 205.9 236.3 272.4
Power consumption kW 78.4 88.4 101.1 117.6
Coefficient of performance ¡ 3.3 3.3 3.3 3.3
Dimensions
Length mm 2153 2153 2816 2816
Width mm 911 911 911 911
Height mm 1650 1650 1650 1650
Weight kg 1357 1426 1779 1865
 System solutions

Investitions- und Energie-

kosten
10-Familienhaus, gut ge-
dämmt
 24/25

Heat pumps for any application and all kinds of

energy from nature or processes
With many years of experience and a high level of manufacturing expertise, Viessmann is
your heat pump manufacturer of choice for standardised and bespoke solutions.

Drawing on more than 35 years of experience, Intelligent control concepts

Viessmann works together with its customers Advanced building services require integrated
to develop energy solutions that will stand control concepts in an open system architecture.
up to any challenge. Whenever standard Viessmann control systems offer the customer
production appliances from the Vitocal range maximum functionality and reliability.
are no longer adequate, bespoke solutions are
the answer. Reliable deadlines and predictable As part of the building management system,
costs with – no unexpected surprises. All a control unit for large heat pump also regulates,
heat pumps – standard products and special for example, the ventilation and heating/
solutions – demonstrate the required outputs cooling circuits, as well as DHW heating.
on the test bed and in practice. All materials It hooks up the energy meter and captures
and processes used are certified, and have the energy flow via Modbus – visualised
been awarded the ISO 9001 quality seal. clearly for the user on the display.

Mono or dual mode solutions Remote monitoring is also possible. This

Depending on the available space and the enables operational characteristics and data
tasks required, the heat pump system is to be analysed and evaluated. In the event of a
engineered and manufactured individually fault, suitable steps to eliminate the cause can
for each application: water/water, brine/water be initiated immediately.
and air/water.

The output spectrum of these systems ranges

from 15 to 2000 kW and can be extended if
required, for example with a cascade linking
several heat pumps.

It is also possible to implement a dual mode

heating system. Here, the heat pump provides
the base supply to provide domestic hot
water and heating water. Any additional heat Clear control technology enables
integration into an open system
required, for example when temperatures
architecture.
are extremely low, is then supplied by an
oil or gas condensing boiler, which kicks in
automatically.
Brine/water
heat pumps

Brine/water heat pump with a

heating output of 290 kW
 26/27

Energy recovery with geothermal probes:

A stable and durable heat source
Brine/water heat pumps utilise the heat stored in the ground.
It is both free and readily available.

Geothermal probes are durable and maintenance

free and tap into the heat source. In conjunction
3
with heat pumps, they deliver heating energy,
and are also the ideal heat exchanger for
natural cooling. Viessmann brine/water heat
1
pumps utilise the ground, both to draw free
energy for heating and to dump energy when
cooling. This dumped energy is available again 4
later for heating purposes.
1 Injection tube
2 2 Dual U-shaped tube
Perfect size for all kinds of heat transfer
5 probe with two
Heat pumps are designed and sized according 6
separate circuits
to customer specifications. Flow temperatures
3 Supply tubes
of 35 to 40 °C are economical and cost effective
4 Protective tubing
for surface heating systems. If required,
(if required)
they can be equipped with efficient output
5 Return from the
modulation or multi stage refrigerant circuits.
7 heat pump (cold)
6 Flow to the heat pump
Ventilation systems work with flow temperatures
(warm)
of up to 55 °C. If, for technical reasons,
8 7 Bentonite/cement
temperatures of up to 70 °C are required, heat
mixture
pumps from the Vitocal 350-G Pro series offer
8 Protective cap
the perfect solution.

Convenient DHW heating Geothermal probe

The geothermal probe is composed of two U-shaped tubes.
Frequently, DHW temperatures above 60 °C
In the centre of this tube bundle there is an injection tube
are required. However, particularly for large
through which a bentonite/cement mixture is pressed after
heat pumps, the performance proportion for the probe has been installed in situ. The drilled hole is filled
DHW heating is low. In such cases, multi from bottom to top. This guarantees the entire probe
stage heat pumps or hot gas decoupling are a is connected with the surrounding earth, seals off any
watercarrying layers from one another and protects the
convenient solution. The use of special safety
probe.
heat exchangers guarantees global potable
water requirements are maintained.

Geothermal probe manifold

Water/water
heat pumps

Water/water heat pump with a

heating output of 500 kW
 28/29

Groundwater and surface water:

Heat sources for high efficiency
High quality stainless steel tubular heat exchangers guarantee high output
and reliable operation of the water/water heat pumps.

For heat pumps, groundwater in a temperature

range of 8 to 12 °C is a very rich heat source,
as the temperature level is high all year round.

Stainless steel heat exchangers offer

many benefits
Viessmann water/water heat pumps for
groundwater or surface water are equipped
with high quality stainless steel tubular heat
exchangers. A large volume and generously
sized surfaces in the evaporator are important
benefits. They are not susceptible to icing
up in the border area. Light floating matter
is simply flushed through with the medium.
Corrosive chemical liquids have little destructive
effect on the high grade stainless steel.

Energy from water at 4 °C Refrigerant circuit of a water/water heat pump with stainless steel tubular heat exchanger

Heat pumps from the standard range can

no longer draw energy from water at 4 °C.
Viessmann designed their large heat pumps
especially for this purpose. The tube bundle
evaporator made from 1.4401 stainless steel
features a de-icing circuit. Water below the
layer of ice on a lake or river can still be used.

Modules simplify handling

When existing heating centres are being
modernised or converted, transporting
the new unit on site often proves difficult.
Viessmann delivers the heat pump as several
modules for assembly on site.

Subject to installation conditions, Viessmann heat pumps are delivered as modules.

Waste heat
technology

This heat pump uses waste heat and, at the same time,
cools the data processing centre and appliance test beds
at the Viessmann head office in Allendorf
 30/31

Using waste water and waste heat from

production processes as heat sources
Through heat extraction, energy that has already been paid for can be returned
to the heating circuit.

Waste water and waste heat contains a

considerable amount of latent energy, which
is rarely utilised. The fuel to generate this
heat has already been paid. The use of a large
Viessmann heat pump enables this heat to be
utilised efficiently.

DHW heating in hotels

Waste water from hotels and leisure complexes
is usually at a residual temperature of 25 to
35 °C. However, a large amount of fresh hot
water is also required for showers and spas.
Before the warm waste water reaches the sewer
system, a heat pump extracts the residual
heat latent in the water. This provides fresh In the 5 star Ritz Carlton Hotel in St Moritz, heat is recovered from waste water.

DHW at a flow temperature of 60 °C or above.

Utilising waste heat for heating

Heating doesn‘t always come first. In many
sectors of industry, process water has to
be cooled, often through the use of cooling
towers. However, a heat pump is generally a
more efficient and more economical solution,
especially when the heat extracted from this
process can be re-used elsewhere.

For both application ranges, Viessmann

develops and builds special heat pumps,
which have been used successfully in many
energy systems for a number of years.
This waste water shaft is used as a primary source for DHW heating.

A waste water heat pump with 150 kW output for DHW heating
Air/water
heat pumps

Air/water heat pump

Glycol dry coolers for an

air/water heat pump
 32/33

Air as heat source:

Ideal in dual mode systems or for cooling
In conjunction with conventional heat generators, air/water heat pumps are an
economical solution if cooling is also required.

When an air/water heat pump is used, the

outdoor air fulfils two tasks: For heating,
the heat pump utilises the outdoor air at a
temperature of down to 5 °C, managing to
cover up to 50 percent of the annual heat load
in a particularly efficient way. Where cooling is
required, the surplus heat inside the building
is routed to the outdoor air.

Split design comprising a heat pump and

a cooler
Air/water heat pumps in the high output range
comprise two units: the indoor heat pump
and the dry cooler, which is installed outdoors
Both units of this split design are connected Glycol dry coolers for air/water heat pumps,
mounted on a wall
by hydraulic lines carrying brine.

A system of this magnitude is operated as

part of a dual mode energy system. From
a specific outside temperature onwards, a
second heat generator backs up or carries out
the efficient heat generation. The system is
controlled by a common control unit.

Heating and cooling with high efficiency

Air/water heat pumps from Viessmann are
designed for heating and cooling. In both
cases, the highest level of efficiency is
guaranteed thanks to variable speed DC fans.
The special design of the air heat exchangers,
with gaps twice as wide as in conventional
chillers, optimises heat transfer. It also lowers
the pressure drop of the air stream, ensures a
fast defrost process and reduces noise.
Service
References

Engineering, service and monitoring

The individual design of large Viessmann heat pumps and full in-house manufacturing
guarantee optimum interaction of all components.

Following installation of a large heat pump,

Viessmann engineers or authorised service
contractors commission the system, check
its performance and reliability, document all
the work carried out, and instruct the future
operators.

As the only heat pump manufacturer with

full in-house manufacturing, Viessmann
guarantees optimum interaction of
components and assemblies.

Service round the clock

Large heat pumps designed for specific
projects can be monitored on a contractual
basis from the Viessmann control centre.
Data communication and remote maintenance
is used to detect irregularities early during
operation and enables appropriate steps to
rectify them to be initiated.

These services are particularly appropriate

for large residential complexes, commercial
and industrial buildings, restaurants, hotels,
A 24 hour service is available for Viessmann and communal facilities such as schools and
bespoke heat pumps.
swimming pools, etc. This, of course, also
includes dual mode systems, such as a
combination of heat pump and oil/gas boiler
to cover peak loads.

The results for the user are a high level of

serviceability, top quality and maximum
flexibility. Additional building services can
be integrated, providing the perfect finishing
touches to the range of services on offer.
 34/35

Tailor-made solutions for all output sizes

Special heat pumps from Viessmann are built according to customer specifications
and factory tested for fault-free function.

Lotte World II, Seoul, South Korea

Heating output installed: 22,200 kW
Cooling capacity installed: 20,400 kW
Installed heat pumps: 12
Special features:
720 geothermal probes at 200 m
(for 6 heat pumps), river water (for 6 heat
pumps), simultaneous heating and cooling

Inselspital Bern, Switzerland

Cooling capacity installed: 1552 kW
Heating output installed: 1769 kW
Compressors: 4
Special features:
Primary source for cooling operating
theatres, and cold rooms,
simultaneous heating and cooling
References

Inntal commercial nursery, Germany

Heating output installed: 1560 kW
Cooling capacity installed: 1280 kW
Electrical output: 279 kW
Special features:
3 well systems as primary source
each with 90 m3/h,
energy to heat the greenhouse floor,
dual mode system with Viessmann boiler

Residential complex in Brissago,

Lake Maggiore, Switzerland
Cooling capacity installed: 86.4 kW
Electrical output: 33.8 kW
Heating output: 120.2 kW
Special feature:
Lake water as a heat source
 36/37

Lidl distribution centre,

Weinfelden, Switzerland
Cooling capacity installed: 434 kW
Electrical output: 201 kW
Heating output: 625 kW
Special feature:
Refrigeration unit as a heat source

Residential complex,
Cologne, Germany
Cooling capacity installed: 56 kW
Electrical output: 18 kW
Heating output: 74 kW
Special feature:
Dual mode system with Vitocrossal 300
gas condensing boiler, 105 kW
References

Keckeisen Akkumulatoren,
Memmingen, Germany
Cooling capacity installed: 119 kW
Heating output installed: 150 kW
Special features:
Concrete core activation and
radiating ceiling panels,
energy contracting

Steca Elektronik,
Memmingen, Germany
Cooling capacity installed: 384 kW
Heating output installed: 484 kW
Heat pumps: 2
Special features:
Use of waste heat,
energy contracting
 38/39

Kiesel GmbH, logistics centre,

Stockstadt am Rhein, Germany
Cooling capacity installed: 284 kW
Heating output installed: 382 kW
Heat pumps: 2
Special features:
Dual mode system with Vitoplex 300
gas condensing boiler, 1600 kW

Erftverband, water industry association

in North Rhine-Westphalia,
Bergheim/Erft, Germany
Cooling capacity installed: 208.5 kW
Heating output installed: 292.5 kW
Heat pumps: 2
Special features:
Heating energy from mine drainage water
(open-cast lignite mining)
Viessmann Group
 40/41

The company

Viessmann is one of the leading international The Viessmann comprehensive range

manufacturers of efficient heating, industrial As environmental pioneer and technological
energy and refrigeration systems. trailblazer for the heating sector, Viessmann
has for decades been supplying exceptionally
Acting in a sustainable manner clean and efficient systems for heating,
As a family business Viessmann takes the refrigeration and decentralised power
long view and places great value on acting generation. Many of the company's
responsibly; sustainability is firmly enshrined developments are recognised as heating
in the company's principles. For Viessmann, equipment milestones. German Sustainability Award for
Production/Brand/Resource
sustainability in action means striking a
Efficiency
balance between economy, ecology and Practical partnership
social responsibility throughout the company; As part of its comprehensive range,
meeting current needs without compromising Viessmann also offers a wide selection of
the quality of life of future generations. complementary services. These services
include a comprehensive training and further
With its strategic sustainability project, development programme for trade partners
Viessmann demonstrates at its own head at the well equipped training facilities of the
office in Allendorf (Eder) that the energy Viessmann Academy.
and climate policy goals set by the German
government for 2050 can in fact be achieved With its new digital services, Viessmann
today with the help of commercially available offers innovative solutions such as the
technology. operation and monitoring of heating systems
by smartphone. Users benefit from greater Energy Efficiency Award

reassurance and convenience, whilst

contractors can keep a constant eye on the
systems for which they are responsible.

Viessmann Group

Company details The comprehensive product range

„ Established in: 1917 from the Viessmann Group
„ Employees: 11,600 „ Boilers for oil or gas
„ Group turnover: 2.22 billion euros „ Combined heat and power generation
„ Export share: 56 percent „ Hybrid appliances
„ 22 production companies in 11 countries „ Heat pumps
„ 74 countries with sales companies and „ Wood combustion technology
branches „ Biogas production plants
„ 120 sales offices worldwide „ Biogas upgrading plants
„ Solar thermal
„ Photovoltaics
„ Accessories
„ Refrigeration systems
 Viessmann Werke GmbH & Co. KG
35107 Allendorf (Eder)
Telephone +49 6452 70-0
Fax +49 6452 70-2780
www.viessmann.com

Your trade partner:

9443 294 - 5 GB 02/2017

Copyright Viessmann
Duplication and alternative use only with prior written consent.
Subject to technical modifications.