TFT-LCD TV Owner S Manual
TFT-LCD TV Owner S Manual
TFT-LCD TV Owner S Manual
MODEL S :
HL26R HL37T
HL32R HL42T
HL40R HL47T
HL42R HL52T
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, The exclamation point within an equilateral triangle is
!
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. intended to alert the user to the presence of important
REFER SERVICING TO QUALIFIED SERVICE operating and maintenance (servicing) instructions in
PERSONNEL.
the literature accompanying the appliance.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
2 TV LCD-TFT
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to
try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may be not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be
used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other
peripheral device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.
Owner s Manual 3
Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your
product. Remember to record the model and serial number. They are on label in back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
4 TV LCD-TFT
Contents
Owner s Manual 5
Controls
This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.
HL26R,HL32R,HL40R,HL42R
MENU INPUT
VOL+ VOL-
CH+ CH-
POWER
HL37T,HL42T,HL47T,HL52T
HL42T,HL47T
MENU INPUT
VOL+ VOL-
HL37T,HL52T
CH+ CH-
HDMI3 IN VIDEO2 IN
VIDEO L - AUDIO - R
6 TV LCD-TFT
Connection Options
HL37T,HL52T
ANT IN
OPTICAL OUT
2
L
HDMI IN
DVI AUDIO
2
1
COMPONENT IN
AV OUT
Owner s Manual 7
LE 14 button
IT
S
ARC
SAP Press to select digital channels. For example, to enter
“54-3”, press “54”, “ ” and “3”.
MUTE
15 TV DVD VCR SETBOX CABLE AUDIO
Press the SELECT button repeatedly to select
one of the system modes in which the remote
VOL+ CH+ control can be used. When the desired device is
selected, the corresponding LED lights on 5 seconds.
16 FADD/ERASE
Press to add or erase a favorite program.
VOL- CH- 17 FAV.LIST
Press to open the favorite channel list.
18 S.MODE
Press to cycle through different sound settings.
19 FREEZE
Press once to display a frozen image of the current program,
but audio continues. Press again to return to the program.
20 INPUT
Show the input source mode.
21 INFO
When you watch the TV, press the key, the information
displays on top of the screen.
22 THUMBSTICK (Up/Down/Left/Right/OK)
Allows you to navigate the on-screen menus and adjust
Q.VIEW the system settings to your preference.
23 SLEEP button
Press to display the sleep timer option.
24 SAP
Selects MTS sound: Mono, Stereo, and SAP in Analog
mode. Change the audio language in DTV mode.
25 LIGHT
Press the light button, white LED will be ON, release this
key, white LED will be OFF.
26 CHANNEL UP/DOWN
Press to scan through channels. To scan quickly through
channels, press and hold down either +/- .
27 Q.VIEW
Press to jump back and forth between two channels.
8 TV LCD-TFT
P.MODE S.MODE
TFT-LCD TV
CC
GUIDE
NPUT
FREEZE
OWNER ' S MANUAL
INF
U O
EN
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
OK
P
EX
EE
IT
SL
ARC
SAP
MUTE
VOL+ CH+
VOL- CH-
MODEL S :
HL26R HL37T
HL32R HL42T
HL40R HL47T
HL42R HL52T
Q.VIEW
Antenna Connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an
outdoor antenna . Over-the-air TV reception quality will depend on your antenna type, antenna
location and antenna positioning.
AV OUT VIDEO IN
Multi-family Dwellings/Apartments ANT IN
Socket
Bronze Wire
1 VIDEO L-AUDIO- R S-VIDEO L-AUDIO- R
Bronze Wire
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Be careful not to bend the bronze wire
Outdoor when connecting the antenna.
Antenna
Owner s Manual 9
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number. AV OUT VIDEO IN ANT IN
10 TV LCD-TFT
How to connect
Connect the audio and video cables from the external VIDEO L-AUDIO-R
How to use
1. Select the input source with using the INPUT button on
the remote control.
2. Press / button to select the desired source.
3. Press OK button to confirm.
2. Operate the corresponding external equipment. Camcorder
How to use
1. Turn on the DVD player, insert a DVD.
2. Use INPUT button on the remote control to select Y
Pb Pr mode.
3. Press Play button on external equipment for program
play.
4. Refer to the DVD player's manual for operating
instructions.
Component ports
on the TV Y Pb Pr
Y Pb Pr
Video output ports Y B-Y R-Y
on DVD player Y Cb Cr
Y PB PR
Owner s Manual 11
1
How to use DVI
1
1. Turn on the digital set-top box. (Refer to the L- AUDIO - R Y Pb Pr L-AUDIO- R
HDMI
How to connect
1. Connect one end of an optical cable to the TV Digital L-AUDIO- R VIDEO OUT
Audio(Optical) Output port.
2. Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for
operation. L-AUDIO- R 1 VIDEO
Note
When connecting with external audio equipments, such
as amplifers or speakers, please turn the TV speakers off.
12 TV LCD-TFT
Connecting a computer
How to connect
1. To get the best picture quality, adjust the VGA graphics card to 1024x768 .
2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for audio connections, depending on your computer
connector.
If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of
either VGA IN or HDMI IN to display the VGAon the TV.
If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or
HDMI ; (the other mode is set to Plug and Play automatically by the TV.)
3. Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.
How to use
1. Turn on the computer a nd the TV.
2. Use INPUT on the remote control to select VGA or HDMI source.
3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGAgraphic card or consult the manufacturer of the VGA graphic card.
Note
1.Use a DVI cable.
2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently
imprinted on the screen.
3. The synchronization input form for Horizontal and Vertical frequencies is separate.
75Hz
60Hz
XGA 1024x768
75Hz
Owner s Manual 13
Note
YPbPr, PC, HDMI, DTV input sources cannot be used for 1 VIDEO L-AUDIO- R S-VIDEO L-AUDIO- R
Monitor out.
When connecting with external audio equipments, such
as amplifiers or speakers, please turn the TV speakers off.
TV or Monitor
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).
2. No separated audio connection is necessary.
How To Use
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically
set to 1280x720p.
If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Select HDMI input source in input source option of Select Main source menu.
When the source device(DVD player or Set Top Box) supports DVI
How To Connect
1. Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).
2. A separated audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio
In port located on the left side of HDMI port.
How To Use
If the source device supports Auto DVI function, the output resolution of the source device will be automatically
set to 1280x720p.
If the source device does not support Auto DVI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
Press the INPUT button to select HDMI input source in input source option of Select Main source menu.
14 TV LCD-TFT
Cable sample
HDMI Cable
(not supplied with the product)
Owner s Manual 15
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
ANT IN
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
AC Outlet
Wider Hole TO USE AC POWER SOURCE
and Blade Use the AC polarized line cord provided for
operation on AC. Insert the AC cord plug into
a standard polarized AC outlet.
Note
Never connect the AC line cord plug to other
than the specified voltage. Use the
attached power cord only.
If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut
the blade. It is the user`s responsibility to have
an electrician replace the obsolete outlet.
If you cause a static discharge when touching
Polarized AC Cord Plug the unit and the unit fails to function, simply
unplug the unit from the AC outlet and plug it
back in. The unit should return to normal operation.
16 TV LCD-TFT
HL26R,HL32R,HL40R,HL42R
Owner s Manual 17
Operation
In the manual, the OSD (on screen display) may be
different from your TV`s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in order
for your TV to work properly. Read the instructions that
follow.
Initial Setup: Set according to the screen display.
Note
If the TV in power on , the screen show information
according the type of input signal . the information will
disappear. If there is no signal , No Signal will display
on the screen.
18 TV LCD-TFT
Channel menu
This TV set has two methods to set channels, which are
respectively Channel Scan, Channel Skip.
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV to
set channel.
Note
The Channel menu will be only operated in normal TV mode.
Video Tuner Antenna
Channel Scan Channel Scan
Audio Channel Skip
1 Press MENU button and then use / button to select Channel
Channel menu.
2 Press or OK button and then use / button to Function
Channel Skip
Video Tuner Mode Antenna
A skip channel is skipped when using CH+ and CH- Channel Scan
Audio
button to browse the channels. A skip channel can Channel Skip
list. Function
Default un-scanned analog channels are skip. Lock
Channel with a check icon is a skipped channel.
Channel OK Enter / Select EXIT Back
Owner s Manual 19
Mute
When you need to pay attention to a conversation, or
there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute)
function is very convenient.
1 Press MUTE button on the remote control and
type face will display on the screen. At this time, the
sound of the TV set is turned off.
20 TV LCD-TFT
Video menu
The TV menu gives you an overview of the menus you can select.
Note
Depending on the input signal, one or more menu items may not be selectable.
Brightness
This will adjust the light output of the complete picture,
which will mainly affect the darker areas of the picture.
Note
Contrast Only when the item of mode is custom , the
This will adjust the intensity of bright parts in the picture
but keep the dark parts unchanged. Brightness, Contrast, Color, Tint, Sharpness
and Color Temperature can be set by user .
Color In other mode the value of them are preset
This will adjust the saturation level of the colors to suit by program .
your personal preference.
Tint
Allows you to select the color mix (Tint) of the picture.
Sharpness
This will adjust the sharpness of fine details in the picture.
Color temperature
This will increase or decrease Warm (red) and Cool (blue)
colors to suit personal preferences.
Select Cool to give the white colors a blue tint, Standard
to give the white colors a neutral tint, Warm to give the
white colors a red tint.
Advanced Video
To adjust the picture in advanced: DNR, Black Level Extender,
White Peak Limiter, CTI, Flech Tone, Adaptive Luma Control.
Owner s Manual 21
Video menu
DNR
To adjust reduce the appearance of digitizing error by the compression: Video DNR Medium
Off, Weak, Medium, Strong, Auto. Black Level Extender On
Audio White Peak Limiter On
Black Level Extender
CTI Medium
To adjust the ability in the black areas detail of the picture: On and Off. Channel Flech Tone On
White Peak Limiter Adaptive Luma Control On
To adjust the ability in the white areas detail of the picture: On and Off. Function
CTI Lock
To adjust the picture for color errors: Off, Weak, Medium and Strong.
Flech Tone
Advanced Video / Select EXIT Back
To adjust the flesh color: On and Off.
Adaptive Luma Control
To adjust changes in the luminance of the picture: On and Off.
VGA Set
Video Mode
When you select the VGA input, this function is used. 59
Brightness
Adjustment for screen Position, Clock, Phase, Setting Audio Contrast 59
Color Temperature
Display adjust menu by pressing INPUT button then use Channel Advanced Video
/ button to select the the source of VGA item. VGA
Function
Auto sync: Automatically adjust display of the picture
Lock
(Olny available in VGA source).
Position : Adjust the screen position.
Video / Select EXIT Back
How to Customize your own audio Audio OK Adjust / Select EXIT Back
status
1 Press MENU button and then use / button to select
Audio menu.
2 Press button and then use / button to select
desired items.
3 Press or OK button and then use / button to adjust
the setting.
22 TFT-LCD TV
Audio menu
Balance
Adjust to emphasize left or right speaker balance.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Sound Surround
To turn the simulated surround sound on and off.
Mode
To adjust the audio mode: Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
Equalizer
To adjust the equalizer: Off, Rock, Pop, Live, Dance,
Techno, Classic and Soft.
SPDIF Type
To Adjust the SPDIF output: Off, Dolby Digital and PCM.
AVL(Automatic Volume Control)
This will reduces the differences in volume level among
broadcasters.
Function menu
Menu Language
When you start using your set for the first time, you must Video Language English
select the language which will be used for displaying menus OSD Timeout Short
Audio OSD Transparency Middle
and indications.
Screen Mode On
1 Press MENU button and then use / button to select Channel
Blue Screen On
Function menu. Function DPMS On
2 Press button and then use / button to select Time Setup
Lock Closed Caption
Language.
Default
3 Press button to select language.
Function / Select EXIT Back
Owner s Manual 23
Function menu
OSD Timeout
1. Press MENU button and then use / button to
select Function menu.
2. Press button and then use / button to select
OSD Timeout.
3. Press button to select Short, Middle or Long.
(Short is for 5 seconds; Middle is for 10 seconds;
Long is for 15seconds)
OSD Transparency
1. Press MENU button and then use / button to select
the Function menu.
2. Press button and then use / button to select
OSD transparency.
3. Press button to select Low ,Middle or High.
Screen Mode Video Language English
Lets you choose the way an analog picture with a 4:3 aspect
OSD Timeout Short
ratio is displayed on your TV with a 16:9 ratio picture format. Audio OSD Transparency Middle
Note
If a fixed image is displayed on the screen for a long time, Screen Mode On
Channel
the image may become permanently burned on the screen Blue Screen On
and remain visible. Function DPMS On
1. Press MENU button and then use / button to select Time Setup
Lock Closed Caption
Function menu.
2. Press button and then use / button to select Default
Screen Mode. Function / Select EXIT Back
Blue Screen
1. Press MENU button and then use / button to select
Function menu.
2. Press button and then use / button to select
Blue Screen.
3. Press button to select On or Off.
DPMS
PC Power Management. To set On, the set will be in
standby mode automatically if no signal in 2 minutes; if
signal input, the set will be on again automatically.
Note: DPMS is useful only in VGA source.
24 TV LCD-TFT
Function menu
Time Zone.
Time Setup / Select EXIT Back
4 Press button to select your viewing area time zone:
Eastern, Central, Mountain, Pacific, Alaska or
Hawaii .
minutes selected.
4 To cancel the set sleep timer: Press button to select Off.
You can also press SLEEP button to select quickly the
sleep timer.
Owner s Manual 25
Function menu
Style
Select this option to select the font style of caption display
according to your own preference.
Press the / button to select Default or Custom. Video NTSC Caption Off
DTV Caption On
Size Audio DTV Caption Style
Select this option to select the size of caption display
according to your own preference. Channel
Press the / button to select Small, Normal or Large .
Function
Text color
Lock
Select this option to select the text color or the opacity of
the text box of caption display according to your own
preference. Function / Select EXIT Back
Text Opacity
Specify the opacity for the text color. Video Style Custom
Size Normal
BG Color Audio Text Color Black
Select a background color. Text Opacity Solid
Channel
BG Color Black
BG Opacity
Function BG Opacity Solid
Select the opacity for the background color.
Window Color White
Lock Window Opacity
Window Color Solid
Select a window color.
Function / Select EXIT Back
Window Opacity
Select the opacity for the window color.
26 TV LCD-TFT
Lock Menu
Parental Control can be used to block specific channels, ratings and other viewing sources.
The parental control function is used to block program viewing based on the ratings sent by the broadcasting station.
The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program
and the categories.
TV Rating :
A (Age) (applies to TV-Y, TV-Y7,TV-G,TV-PG,TV-14, TV-MA)
D (Dialogue - sexual dialogue) (applies to TV-PG, TV-14)
L (Language - adult language) (applies to TV-PG, TV-14, TV-MA)
S (Sex - sexual situations) (applies to TV-PG, TV-14, TV-MA)
V (Violence) (applies to TV-PG, TV-14, TV-MA)
FV (Fantasy Violence) (applies to TV-Y7)
Owner s Manual 27
Lock Menu
Lock setup
Set up blocking schemes to block specific channels, ratings,
and external viewing sources.
Video Password
A password is required to gain access to this menu.
1. Press MENU button and then use / button to select Audio
Lock menu. Then, press the button.
Channel
The TV is set up with the initial password 0-0-0-0 and Function
security default password is 9-4-4-3.
Lock
2. Use / button to select the desired items, and press
button to enter the next menu. Once the option is Lock EXIT Back
selected, change the settings to your preference.
Password
Change the password by inputting a new password twice.
2 Analog
Video 3
Channel Block Analog
4 Analog
Audio 5 Analog
1 Press MENU button and then use / button to select 6 Analog
Channel 7 Analog
Lock menu. 8 Analog
9 Analog
2 Press button and then use / button to select Function 10 Analog
Channel Block. 11 Analog
Lock 12 Analog
3. Press / button to select the item, Press OK button
to set.
Channel Block OK Set / Select EXIT Back
Parental Guide
Note
The Parental control will automatically block certain
categories that are more restrictive . For example, if Video Parental Lock On
you block TV-Y category, then all the categories in Parental Guide
Audio MPAA Rating
the young adult group will be blocked (TV-Y, TV-Y7,
CA Eng Rating
TV-G, TV-PG, TV-14 and TV-MA). Channel
CA Fren Rating
The sub-ratings (D, L, S, V, FV) work together similarly. Digital Rating
Function
Block Unrated On
How to set the D, L, S, V and FV sub-ratings.
Lock
First, press / button select one of these Ratings:
TV-Y, TV-Y7, TV-G, TV-PG,TV-14, or TV-MA , and press
Program Block OK Enter / Select EXIT Back
/ button.
28 TV LCD-TFT
Lock Menu
Lock setup
A symbol will be displayed for each sub-rating.
While is selected, press OK button to go to a sub Video A D L S V FV
TV-Y
rating. To select a different Rating, press / buttons
Audio TV-Y7
and then repeat the process. TV-G
Note Channel TV-PG
TV-14
The V-chip will automatically block certain categories
Function TV-MA
that are More restrictive .For example, if you block
Allowed Rating Blocked Rating
sub-rating in TV-PG, then the sub-ratings in Lock
MPAA Rating
Blocks movies according to the movie ratings limits
specified, so children cannot view certain movies. You
Video
can set the ratings limit by blocking out all the movies with G
PG
the ratings above a specified level. Keep in mind that the Audio
PG-13
movie ratings limit only applies to movies shown on TV, Channel R
NC-17
not TV programs, such as soap operas.
Function X
CA Eng Rating
Canadian English Language Rating Video C
C8+
1 Press / button to select CA Eng Rating item. Audio
G
2 Press button and then use / button to select the PG
Channel
rating. 14+
3 Press OK button to confirm. 18+
Function
Allowed Rating Blocked Rating
Lock
CA Fren Rating
Canadian French Language Rating
Video G
1 Press / button to select CA Fren Rating item. 8 ans+
2 Press button and then use / button to select the Audio 13 ans+
rating. 16 ans+
Channel
18 ans+
3 Press OK button to confirm.
Function
Allowed Rating Blocked Rating
Lock
Owner s Manual 29
Other Functions
Brief Info
Brief Info shows the present screen information.
Press INFO button to show the Brief Info on the screen.
Press INFO button or EXIT button to exit.
Function:
Show the present screen information.
Press INFO button or EXIT button to exit.
A: Video resolution
B: Program name
C: Program rating categories
D: program show time
E: Program title
F: Channel Lable
G:Tuner mode
H:Program details
A: Program title
B: program options
C: program show time
D: Program details
E: Program rating categories
30 TV LCD-TFT
Other Functions
Quick program view
1 Suppose the channel number you used just now is 8 and the
channel number you are using is 18 (as shown in the figure).
Owner s Manual 31
Remote Control
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in six different modes:
TV, DVD, VCR, SETBOX , CABLE or AUDIO. Pressing the corresponding button on the remote control
allows you to switch between these modes, and control whichever piece of equipment you choose.
Note
The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
Control Operation
To control a device using the Control
1. Program the Control to work with your device.
2. Changing device mode by pressing SELECT key. Default device is TV. When press
TV DVD VCR SETBOX CABLE AUDIO SELECT key, current device led will be on. Keep pressing SELECT key to choose a
CH.LIST FAV.LIST ADD/ERASE
SELECT device, the loop is: TV DVD VCR STB Cable Audio - TV. When device is set, related
device LED will be on for 5 seconds and then be off.
TODAY NEXT DAY PAGE- PAGE+ 3. Aim the remote at the device.
4. Press POWER button to turn the device on.
5. Use the other Control buttons to operate the device. Device LED will blink if user presses
any key (if the key has data in current mode.). If the key has no data, then LED will not blink.
6. Default init status: TV/Haier 001 code.
7. Bulb key to control the flash light.
P.MODE S.MODE
CC FREEZE
Programming the Control
The Control is factory-programmed to support up to 600 code sets.
E NPUT
GUID
IN
There are two ways to program the Control:
U FO
EN Selecting a brand code for the device you wish to operate, and then entering that code
manually into the Control.
Using the Power Scan feature to find device codes automatically.
OK The two programming methods are described in the following sections.
P
Manually Programming the Control
E
1. Using SELECT key to choose the device you want to program.
EX
LE
IT
S
ARC
SAP 2. While Press and holding OK key, press SELECT key, and device LED will be ON. Keep the
MUTE status for about 5 seconds, release both keys and then LED will blink twice per second,
indicating that the control is ready for programming.
3. Led will blink once when you enter a digit key, indicating the digit key is programmed. If 3
VOL+ CH+
digits are programmed successfully, device LED will be ON for about 3 seconds and then
blink twice per second. Then User now can:
a) Try to operate the device by using POWER or PLAY keys. If operation can be done,
VOL- CH-
press OK to save current 3-digits code and exiting manually programming mode.
b) Return to beginning of step 3. Reprogram the control.
4. If user's input is incorrect, LED will blink 12 times in 3 seconds. And then keep twice per
second blink, user now can return to step 3 and re-program the device.
5. Within 10 seconds, user should enter the 3-digit brand code corresponding to your device.
If time out or any key other than POWER PLAY and digits is pressed, LED will be off and
manually programming process is exit.
6. Fast Programming Haier default TV code set. Press and holding EXIT key and then press
SELECT key for 5 seconds, default Haier code set (001) will be programmed to the control.
32 TV LCD-TFT
Remote Control
5. When the device turns ON, press and release OK key to program the control with the
new code, saving the code and exit. To exit without programming, press any key other
except CH+/CH- and OK. LED will be off after manually scan mode is exit.
6. If the device responds, no further programming is required. If the device does not respond,
repeat step 1 through 5.And searching will start from current code set. If no key was
pressed in 30 seconds, manually scan mode will be automatically exit.
7. After searching the entire data base, this mode will be automatically exited and led will
blink for 3 times.
E NPUT
GUID
IN
Punch-Through Features
FO
EN
U
The Control provides two punch-through features that allow users to control TV volume and
DVD or VCR operation while the control is in another device mode control certain features of
another device.
OK
Volume Punch-Through:
The TV Volume/Mute punch-through feature allows you to control the volume and mute function
P
E
of your TV while the control is in another device mode. The feature is applicable for all devices
EX
LE
IT
S
ARC
SAP and brands that do not use the volume control buttons for other purposes.
MUTE
Transport Key Punch-Through:
The DVD or VCR transport key punch through feature lets you control the PLAY, STOP, PAUSE,
VOL+ CH+ REWIND, FF and RECORD functions of your DVD or VCR while the control operates in other
modes. The feature is applicable for all devices and brands that do not use the transport keys
for other purposes.
VOL- CH-
Protection mode
1. While press and holding OK, press FREEZE key for 5 seconds to enter protection mode. In
this mode, all the above programming methods will be invalid.
2.To exit protection: While press and holding OK, press FREEZE key. Current device related
LED remains ON and then release OK and FREEZE. Input three digit password 8 8 8 , LED
turns off and protection mode is ended. If error password is input or no password input in 10
seconds, LED blinks three times and then turns off. Protection mode will remain.
Display mode
1.To enter display mode, while press and holding OK key, press SELECT key and device
Q.VIEW LED will be ON, keep the status for about 5 seconds. Release both keys and then LED will
blink 2 times per second, indicating control is ready for programming.
2.Sequence press 9, 8, 0 to enter display mode. And LED is off now.
3.Press digit 1 key to get the first digit of current code set. For example, if the first digit of code
set is 1, so then led will blink once and remains OFF. Digit 0 in code set will not be displayed.
Blink twice per second.
4.Press digit 2 key to get the second digit of current code set. For example, if the second digit
of code set is 3, so then led will blink three times and remains OFF. Blink twice per second.
5.Press digit 3 key to get the third digit of current code set. Blink twice per second.
6.Only digit 1, 2, 3 are valid in this mode. And the sequence is not fixed. You can repeat, if you
don't remember clearly.
7.Control will not send out data in this mode if user presses any keys other than digit 1, 2, 3.
And this can be regarded as no key pressed.
8.If no key was pressed in 10 seconds or any key other than digit 1, 2, 3 is pressed display
mode is ended.
Owner s Manual 33
Remote Control
Remote Control Codes
TV
NO. Brand Code NO. Brand Code
1 Haier 001 002 003 004 005 006 007 008 009 010 011 085 74 Memorex 071 074 075 084 104
2 A Mark 134 75 MGA 073 074 075 080 105
3 Action 108 76 Mitsubishi 049 073 074 075 080 104 105 112 117 134
4 Admiral 071 093 099 118 127 130 131 77 Montgomery Ward 071
5 Advent 147 78 Motorola 072 093
6 Aiko 079 79 MTC 073 074 075 089 104 112 118 125 140
7 Aiwa 047 80 Multitech 082
8 Akai 104 105 123 81 Multivision 088
9 Amtron 082 82 NAD 075 101
10 Anam 106 83 NEC 072 073 074 075 105 112 116 117 139
11 Anam National 072 082 110 84 Nikko 075 079 140
12 AOC 073 074 075 104 112 117 134 140 85 Noblex 137
13 Apex 000 157 015 016 86 Onwa 082 106
14 Audiovox 082 108 140 144 87 Optimus 101
15 Bell & Howell 071 084 118 131 88 Optonica 093
16 Benq 051 89 Orion 096 130 146
17 Broksonic 037 038 104 106 118 138 146 90 Panasonic 159 167 023 032 033 034 072 086 087 108 110 113 126 127 128 140
18 Carver 153 91 Philco 072 073 074 075 078 080 087 104 105 112 114 117 118 119 131 140
19 CCE 118 145 153
20 Centurion 077 92 Philips 160 161 029 030 072 073 078 080 087 118 153
21 Citek 143 93 Pioneer 045 073 075 101 110 111 116 117
22 Citizen 073 075 079 082 089 092 138 94 Portland 073 074 075 079 092 104 112 117 134 135
23 Classic 104 123 95 Price Club 089
24 Colortyme 073 075 105 116 118 125 127 139 96 Prima 135 142 152
25 Contec Cony 106 108 97 Prism 086
26 Contec/Cony 078 082 98 Proscan 070 127 149 154 155
27 Craig 082 106 108 114 119 125 138 99 Proton 073 075 078 104 105 117 119 127 134 138
28 Crosley 118 153 100 Quasar 053 063 064 072 086 110 114 126 128
29 Crown 082 087 119 134 101 Radio Shack 084 106 108 110 118 120 124 127 132 134 155
30 CTX 056 102 Radio Shack/Realistic 070 073 075 078 082 084 092
31 Curtis 104 103 RCA 164 060 065 070 072 073 074 075 080 102 106 110 111 113 116 117
32 Curtis Mathes 070 073 075 084 089 092 102 105 112 117 118 125 127 134 135 125 127 128 134 148 149 154 155
148 153 155 104 Realistic 084 155
33 Daewoo 073 074 075 079 092 104 110 112 117 134 135 140 144 105 Runco 091
34 Daytron 073 075 092 114 117 134 140 106 Sampo 039 073 075 092 110 112 117
35 Denon 145 107 Samsung 043 048 054 057 062 073 074 075 078 080 089 092 097 104 112 117
36 Dimensia 070 155 118 125 131 134 139
37 Dumont 073 091 108 Sansui 022 096 120
38 Electrohome 072 073 075 080 104 105 117 134 109 Sanyo 073 084 115 124
39 Emerson 073 075 078 081 082 083 084 092 096 103 104 105 106 108 114 110 Scott 073 075 078 082 083 106 108 117 130 134
117 119 125 129 130 131 134 139 144 146 111 Sears 070 073 075 080 083 084 095 104 106 115 118 124 127 133 134 149
40 Envision 073 075 105 112 153 155
41 Fisher 052 084 115 123 124 133 112 Sharp 013 028 035 073 075 078 092 093 120 131 132 134 139 141
42 Fujitsu 083 113 Signature 071
43 Funai 082 083 106 108 114 Signature 2000 115 132
44 GE 165 066 067 070 072 073 075 168 086 104 106 110 113 116 117 115 Sony 158 018 026 098 100 121 123 134
125 126 127 128 134 144 149 154 155 116 Soundesign 073 075 082 083 104 106 117 119 129
45 Goldstar 073 074 075 078 080 092 104 105 109 112 117 134 135 137 117 Starlite 082
46 Gradiente 105 122 123 118 Supre-Macy 094
47 Granada 134 119 Sylvania 044 046 069 073 075 080 087 104 105 112 114 117 118 119 140 153
48 Grundig 126 134 120 Symphonic 081 082 095 108
49 121 Tandy 093 118
Hallmark 073 075 104
50 Harman Kardon 104 122 Tatung 072 110 138
51 Hisense 151 123 Technics 086 126 128
52 Hitachi 124 Techwood 073 075 086 105 118
041 042 058 059 068 073 075 078 101 117 126 127 131 134 140 145
53 Infinity 125 Teknika 071 073 074 075 078 079 082 083 089 092 106 108 112 116 117 119
087 153
54 Janeil 094 134 137 140 143 153
55 126 Telecaption 090
JBL 087 153
56 127 Telefunken 139
JC Penney 070 073 074 075 168 086 089 092 104 112 113 125 126 127 134 149
128 Toshiba 162 019 021 024 025 027 084 089 090 115 125 133 150
155
129 Totevision 092 127
57 Jensen 073 075 105 129
130 Ultra 140
58 JVC 163 166 012 031 036 078 086 103 122 125 126
131 Uniden 121
59 Kawasho 073 075 112 123
132 Universal 168
60 Kenwood 073 075 080 104 105 112 116 139
133 Video Concepts 106
61 Kloss Novabeam 082 094 110
134 Vidikron 118 153
62 KTV 082 092 106 108 112 117 134
LG 135 Wards 070 071 073 074 075 080 081 083 168 087 104 112 113 117 118 119
63 074
Lloyds 120 125 127 131 153 155
64 137 139
136 Wallmart 055 051 107
65 Loewe 087
137 White Westinghouse 104 112 134 135 140 144
66 Logik 071 142
138 Yamaha 073 074 075 080 112 119 139 140
67 Luxman 073 075
139 Zenith 050 055 061 071 073 091 109 121 140
68 LXI 070 075 084 087 104 118 127 149 153 155
140 RePlay 156
69 Magnasonic 104 105 131 140
70 Magnavox 017 073 075 080 087 104 105 112 114 117 118 119 126 131 153
71 Majestic 071
72 Marantz 073 075 087 105 112 116 117 118 153
73 Megatron 075
34 TV LCD-TFT
Remote Control
Owner s Manual 35
Remote Control
SETBOX
NO. Brand Code
NO. Brand Code
1 Alphastar 028
76 Radio Shack/Realistic 048 050 051 053 054 055 062 073 2 Chaparral 024
77 Radix 051 3 DIRECTV 001 039
78 RCA 012 016 043 044 050 053 057 058 065 070 078 079 088 107 4 DISH NETWORK 001 026 030
108 112 5 Drake 027
79 Realistic 048 050 051 052 053 054 055 062 073 074 079 090 094 097 105 6 Echostar 026
80 Ricoh 072 076 7 Express Vu 030
81 Runco 064 8 Fujitsu 022
82 Samsung 029 031 035 039 050 052 079 095 9 GE 004 032 033
83 Sansui 047 068 071 085 10 General Instruments 018 019
84 Sanyo 022 048 050 089 097 105 11 Hitachi 023
85 Scott 049 052 061 090 12 Hughes 023 036
86 Sears 048 051 053 057 058 065 077 088 089 090 097 105 13 Janeil 022
87 Sharp 015 062 073 074 091 094 101 14 JVC 015
88 Shintom 045 058 059 085 15 Mitsubishi 002 040
89 Signature 073 074 16 Panasonic 005 011
90 Signature 2000 097 101 17 Philips 000 012
91 Singer 053 059 072 076 085 18 Proscan 032 033
92 Sony 007 041 045 063 080 082 084 098 099 19 Radio Shack 018 019
93 STS 053 065 20 RCA 010 032 033
94 Sylvania 030 032 053 054 055 060 061 110 21 Realistic 014
95 Symphonic 055 077 095 105 22 Samsung 006 028
96 Tandy 048 23 Sony 007 034 035 037 038
97 Tashiko 051 24 Star Choice 031
98 Tatung 068 25 Star Trak 021
99 Teac 055 068 107 26 STS 020
100 Technics 053 066 27 Toshiba 008 029
101 Teknika 051 053 055 090 28 Uniden 016 017
102 Toshiba 010 011 052 057 061 069 100 102 105 109 29 Zenith 009 013 022
103 Totevision 050 051 090
104 Tivo 111
105 Unitec 095
106 Unitech 050
107
108
Vector Research
Video Concepts
046 047
046 047
052 077
052 069 077
CABLE
109 Wards 050 051 052 053 055 057 058 059 062 065 073 074 079 090 091 094 NO. Brand Code
105 108 110
110 White Westinghouse 095 1 ABC 000 001 002 030
111 XR-1000 053 055 059 2 Archer 006 007
112 Yamaha 046 047 048 068 077 3 Cableview 003
113 Zenith 027 038 045 064 072 076 090 093 4 Contec 034
114 Action 102 5 Eastern 035
6 GE 000
7 Gemini 012 013
8 General Instruments 000 032
9 Hamlin 036 037 038 040 044
10 Hitachi 000
11 Jerrold 000 012 015 016 026 030 032
12 Magnavox 017
13 Motorola 031
14 Movie Time 039
15 NEC 033
16 NSC 039
17 Oak 034 041
18 Panasonic 027 029
19 Philips 008 009 010 011 013 017 018 019 020
20 Pioneer 021 022
21 Proscan 000
22 RCA 003 029 032
23 Realistic 006
24 Samsung 022
25 Scientific Atlanta 002 023 024 025
26 Signature 000
27 Sprucer 029
28 Standard Component 042 043
29 Starcom 012 030
30 Stargate 012
31 Tocom 001 015
32 United Cable 030
33 Universal 004 006 007
34 View Star 017 034 039
35 Zenith 028
36 TV LCD-TFT
Remote Control
Owner s Manual 37
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power
cord to protect against possible damage from lightning or power surges.
38 TV LCD-TFT
Product Specification
Resolution 1366X768(Dot)
MODEL
Dimensen(WX D X H ) Unit::inches/mm
Weight(pounds/kg)
(Including stand)
26.1X8.0 X19.7inches
HL26R 662X202X501 mm
29.8/13.5
31.3X9.2 X22.9inches
HL32R 796X233X582 mm
29.8/13.5
36.2X11.4X26.6inches
HL37T 919X290X675 mm
45.2/20.5
40.5X13.0X30.2inches
HL42T 1028X330X767mm
66.1/30.0
44.8X13.0X32.5inches
HL47T 1138X330X825mm
75.0/34.0
50.4X14.4X36.8inches
HL52T 1279X366X935mm
88.6/40.2
The specifications shown above may be changed without prior notice for quality improvement.
Owner s Manual 39
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to
the instructions listed hereunder before contacting the after-sales service for technical assistance.
No color for some Verify if the same problem exists in other channels.
channel program Check out of picture and sound systems.
(black and white) Refer to relative instructions in the Manual for color
adjust.
Note: Do not leave the television with static picture in an extended period as the image may become permanently burned.
Note: Production of the LCD screen requires high and precision technologies. However, there might be some dark or bright
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400
meters above the sea level where the air pressure is below 750hpa, the picture on the LCD screen may be affected and a
muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is
resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited
warranty.
40 TV LCD-TFT
Warranty
This Haier brand product, when shipped in Responsibility of Haier to the purchaser with
its original container, will be free from respect to the product, and shall
defective workmanship and materials, and
agrees that it will, at its option, either repair constitute full satisfaction of all claims,
the defect or replace the defective product whether based on contract, negligence, strict
with a new or re-manufactured equivalent at duality or otherwise. In no event shall Haier
no change to the purchaser, for parts or be liable, or in any way responsible for any
labor for the periods set forth below: damages or defects in the product which
were caused by repairs or attempted repairs
This warranty does not apply to the performed by anyone other than an
appearance of the product or the exterior of authorized service center or dealer; nor shall
the product, which has been damaged or Haier be liable, or in any way responsible
defaced, altered or modified in design or for incidental or consequential economic or
construction. It does not apply to the property damage. Some states do not allow
additional excluded items set forth below: the exclusion of incidental or consequential
damages, so that above exclusion may not
The warranty commences on the date the apply to you.
item was purchased and the original
purchase receipt must be presented to the THIS WARRANTY GIVES YOU
authorized service center before warranty SPECIFIC LEGAL RIGHTS. YOU MAY
repairs are rendered. ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
The limited warranty described herein is in
addition to whatever implied warranties may
Warranty period for this product: one year parts
be granted to purchasers by law. ALL
and labor.
IMPLIED WARRANTIES INCLUDING THE
Additional items excluded from warranty
WARRANTIES OF MERCHANTABILITY AND
coverage: non-rechargeable batteries.
FITNESS FOR USE ARE LIMITED TO THE
Where to obtain service: For the location of
PERIOD(s) FROM THE DATE OF PURCHASE
the nearest Haier authorized service center or
SET FORTH BELOW. Some states do not
to obtain product literature, accessories,
allow limitations on how long an implied
supplies or customer assistance,
warranty lasts, so the above limitation may
please call 1-877-337-3639.
not apply to you.
What to do to obtain service: ship or carry in
Neither the sales personnel of the seller nor your product to an authorized service dealer
any other person is authorized to make any or center .Be sure to have proof of purchase.
warranties other than those described herein, If you ship the product, be sure it is
or to extend the duration of any warranties packaged carefully.
beyond the time period described herein on Haier America
behalf of Haier. New York, NY 10018
Owner s Manual 41