Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 107 views

    Megadyne - DTM - Kompakt: Advantages of The Device

    Uploaded by

    Val
    The MEGADYNE DTM KOMPAKT is a non-contact device that measures drive belt tension through frequency measurement between 10-600Hz. It has several advantages like repeating accuracy, wide measurement range, high accuracy, noise suppression, and a detachable sensor. The document provides safety instructions, operating instructions including how to start a measurement and understand the results, as well as some troubleshooting information and the device's technical specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Megadyne - DTM - Kompakt: Advantages of The Device

    Uploaded by

    Val
    107 views3 pages
    The MEGADYNE DTM KOMPAKT is a non-contact device that measures drive belt tension through frequency measurement between 10-600Hz. It has several advantages like repeating accuracy, wide measurement range, high accuracy, noise suppression, and a detachable sensor. The document provides safety instructions, operating instructions including how to start a measurement and understand the results, as well as some troubleshooting information and the device's technical specifications.

    Original Description:

    MEDIDOR DE TENSÃO

    Original Title

    Dtm Kompakt

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MEGADYNE DTM KOMPAKT is a non-contact device that measures drive belt tension through frequency measurement between 10-600Hz. It has several advantages like repeating accuracy, wide measurement range, high accuracy, noise suppression, and a detachable sensor. The document provides safety instructions, operating instructions including how to start a measurement and understand the results, as well as some troubleshooting information and the device's technical specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    107 views3 pages

    Megadyne - DTM - Kompakt: Advantages of The Device

    Uploaded by

    Val
    The MEGADYNE DTM KOMPAKT is a non-contact device that measures drive belt tension through frequency measurement between 10-600Hz. It has several advantages like repeating accuracy, wide measurement range, high accuracy, noise suppression, and a detachable sensor. The document provides safety instructions, operating instructions including how to start a measurement and understand the results, as well as some troubleshooting information and the device's technical specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    do Brasil Ltda.

    Rua Maria Curupaiti, 1169 - 02452-002 - São Paulo - SP - Brasil


    Fone: +55 11 2208-9332 - Fax: +55 11 2236-6683

    MEGADYNE - DTM - KOMPAKT

    The MEGADYNE DTM KOMPAKT is used to check the tension of drive belts by
    means of frequency measurement.

    Advantages of the device:

    • Non-contact measurement with repeating accuracy


    • Large range measuring from 10 up to 600Hz
    • High level of measuring accuracy
    • Evaluation of quality of measurement results
    • Suppression of background noises
    • Universal measuring head for convenient measurement
    • Detachable measuring sensor for narrow spaces

    Safety information

    Before measurement begins, switch of the drive machine to ensure that neither the
    drive shaft nor the driven shaft are caused to rotate unintentionally. The relevant safety
    instruction should also be observed

    Operating instruction

    An A for active appears on the display after the device is switched on . An M appears
    to indicate when the machine begins measuring . Hold the measurement head over the
    belt to be checked. The microphone can be detached from the measure head if the
    space is narrow.
    Start the belt vibration with a finger or by tapping it.
    Measurement with measurement evaluation begins when a constant frequency is
    reached .This is indicated by an LED . Another signal is emitted after the measurement
    has been evaluated an the result is displayed in Hz. A goes out and a number between
    1 and 4 appears.
    This number represents the number of successful measurement cycles .
    If an E appears after the number then one of the measurements result was outside of
    the tolerance range.
    If 1 or E appears it is recommended that the measurement should be repeated after
    the A reappears.
    The measurement frequency (Hz) should be compared with the set value (Hz).You
    should reduce or increase the belt tension depending on the measurement result until
    the set value is reached.
    The measurement frequency f ( Hz) is converted into tension T(N) according to the
    following formula:

    T= 4 *k * l2 * f2

    The tension value and weight per metre can be found in your technical Datasheet.

    The result is displayed for two minutes. After that Period the machine automatically
    switches off. To restart the device, press the on switch.
    To clear the display, press the reset key.

    Special Information

    If no measurement is possible in despite of numerous taps on the belt, this may have
    the following causes:

    • the belt vibration is outside the specified frequency range


    Remedy: change the belt tension
    • The belt can only vibrate slightly
    Remedy: Increase the amplitude of vibration, tap the belt harder.

    When Low Batt appears, you should replace the batteries. We recommend removing
    the batteries if the device is not used for a longer time.

    About the drive mechanism: No more than one belt drive pulley should be fixed when
    measurement takes place. All other pulleys should rotate freely. By installing a new
    belt, a number of rotations should be carried out to guarantee a correct measurement.
    Technical Data:

    Range of measurement: 10-600Hz


    Measuring precision 10-400Hz +/- 1%
    400-600Hz +/- 2%
    +/- 1 digit

    Measuring method non contact acoustic with background noise


    suppression
    Voltage supply 2*1,5V Mignon (LR06) AA
    Power consumption < 25 mA
    Display LCD 2 lines of 8 characters

    Working temperature 0 to +50° C


    Storage temperature -20 to +60°C

    Declare of conformity with CE identification.

    You might also like