WWW.DGCAQUESTIONPAPERS.

IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Explanation. AL/3-13 8.4.

06a. Pipes and Unions.
1(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Question Number. 5. To prevent

Question Number. 1. When replacing a damage to seals on fitment you would.
hydraulic pipe, where would you find the correct Option A. compress and stretch them.
replacement part?. Option B. use a cardboard protector over the
Option A. Parts catalogue. threaded portions.
Option B. Maintenance schedule. Option C. use grease.
Option C. Maintenance manual. Correct Answer is. use a cardboard protector
Correct Answer is. Parts catalogue. over the threaded portions.
Explanation. NIL. Explanation. Use cardboard protection to
prevent damage to seals when fitting them. AC43
9-15.
Question Number. 2. How are flexible
hoses categorised?.
Option A. By maximum pressure. Question Number. 6. Flexible pipes are
Option B. By diameter. identified by.
Option C. By length. Option A. length.
Correct Answer is. By maximum pressure. Option B. diameter.
Explanation. NIL. Option C. material.
Correct Answer is. material.
Explanation. NIL.
Question Number. 3. What are the rigid
pipes on gas turbine engines made from?.
Question Number. 7. A pipe carrying
Option A. Stainless steel. lubricant would be identified by the colour.
Option B. Aluminium alloy.
Option C. Copper. Option A. white.
Correct Answer is. Stainless steel. Option B. yellow.
Explanation. Stainless steel has a high Option C. white and yellow.
resistance to heat. BL/6-15 3.3.1. Correct Answer is. yellow.
Explanation. Standard Aviation Maintenance
Handbook Page 128/129.
Question Number. 4. How would you
test a hydraulic hose?.
Option A. Pressure test 2.0 * working Question Number. 8. Which material is
pressure. a hydraulic fluid hose made from?.
Option B. Pressure test 1.5 * working Option A. Rubber.
pressure. Option B. Butyl.
Option C. Pressure test 1.0 * working Option C. Teflon.
pressure. Correct Answer is. Teflon.
Correct Answer is. Pressure test 1.5 * working Explanation. Jeppesen A&P General Textbook
Page

pressure. 10-16, CAAIP Leaflet 5-5 paragraph 2.2.2.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Question Number. 13. When fitting a

replacement flexible hose.
2(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Question Number. 9. Hydraulic pipes Option A. use the old one to apply the 'set',
are made from.
Option A. 1100 or 2020 H14. Option B. ensure adequate clearance
Option B. annealed steel. between the hose and the aircraft structure.
Option C. 5056 or 7075. Option C. always pressure test before fitting.
Correct Answer is. annealed steel.
Explanation. A&P General Textbook Page 10-2. Correct Answer is. ensure adequate clearance
between the hose and the aircraft structure.
Explanation. NIL.
Question Number. 10. The continuous
coloured line on a hose assembly.
Option A. identifies hose material. Question Number. 14. MIL-H-5606
Option B. will assist in detection of any twist hydraulic fluid O-rings are identified with a.
in an installed hose.
Option C. identifies fluid compatibility of Option A. blue dot.
hose. Option B. yellow dot.
Correct Answer is. will assist in detection of Option C. yellow and white dot.
any twist in an installed hose. Correct Answer is. blue dot.
Explanation. The 'lay line' will indicate twist in Explanation. Jeppesen A&P Airframe Technician
the hose. Textbook

Question Number. 11. The storage life of Question Number. 15. What type of
a flexible hose can be up to but not exceeding. material would hydraulic pipes on an
undercarriage leg or bay be made from?.
Option A. 5 years.
Option B. 2 years. Option A. Stainless steel, annealed, 14H.
Option C. 4 years. Option B. 7075, H14.
Correct Answer is. 5 years. Option C. 1100, 2024, in half hard state.
Explanation. Leaflet 5-5 3.1. Correct Answer is. Stainless steel, annealed,
14H.
Explanation. NIL.
Question Number. 12. The markings on a
flexible hose must include the.
Option A. internal bore size. Question Number. 16. A metal pipe has a
Option B. manufacturers name. small indentation. What are the limits?.
Option C. date of manufacture. Option A. 5% internal diameter.
Correct Answer is. date of manufacture. Option B. 10% of external diameter.
Explanation. Leaflet 5-5 4. Option C. No dent on a bend.
Correct Answer is. No dent on a bend.
Explanation. AC43 9-30c.
Page

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Option C. expands in length and diameter.

Question Number. 17. An aircraft pipe
3(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

has a number stamped on it. It is the. Correct Answer is. contracts in length and
Option A. fluid it is carrying. expands in diameter.
Option B. aircraft system. Explanation. NIL.
Option C. serial number.
Correct Answer is. serial number.
Explanation. NIL. Question Number. 21. The term 'cold
flow' is generally associated with.
Option A. welding and sheet metal.
Question Number. 18. The length of a Option B. rubber hose.
straight hose assembly is measured. Option C. vaporizing fuel.
Option A. between the outer faces of the Correct Answer is. rubber hose.
union nuts. Explanation. deep permanent impression left in
Option B. between the extremities of the a flexible hose by the pressure of hose clamps and
two nipples. supports.
Option C. along the coloured line.
Correct Answer is. between the extremities
of the two nipples. Question Number. 22. Flexible lines must
Explanation. Leaflet 5-5 2.4. be fitted with a slack.
Option A. of 5 - 8 % of the length.
Option B. of at least 10 - 12 % of the length.
Question Number. 19. Metal tubing fluid
lines are sized by wall thickness and. Option C. to allow maximum flexing during
Option A. outside diameter and 1/32 inch operation.
increments. Correct Answer is. of 5 - 8 % of the length.
Option B. inside diameter and 1/16 inch Explanation. NIL.
increments.
Option C. outside diameter and 1/16 inch
increments. Question Number. 23. The material
Correct Answer is. outside diameter and 1/16 specifications for a certain aircraft require that a
inch increments. replacement oil line be fabricated from3/4 inch,
Explanation. NIL. 0.072 5052-0 aluminium alloy tubing. What is the
inside dimension of this tubing?.
Option A. 0.688 inch.
Question Number. 20. A certain amount Option B. 0.606 inch.
of slack must be left in a flexible hose during Option C. 0.750 inch.
installation because, when under pressure, it. Correct Answer is. 0.606 inch.
Explanation. Subtract 2x wall thickness from the
Option A. expands in length and contracts in outside diameter.
diameter.
Option B. contracts in length and expands in
diameter. Question Number. 24. Excessive stress on
Page

fluid or pneumatic metal tubing caused by

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

expansion and contraction due to temperature Option A. is a high pressure line. The letters
changes can best be avoided by. mean Pressure High, Discharge at Nacelle.
4(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Option A. providing bends in the tubing. Option B. is carrying a substance which may
Option B. using short, straight sections of be dangerous to personnel.
tubing between fixed parts of the structure of the Option C. is carrying a substance which
aircraft. cannot be made non-toxic.
Option C. not subjecting the aircraft to Correct Answer is. is carrying a substance
sudden changes in temperature. which may be dangerous to personnel.
Correct Answer is. using short, straight Explanation. PHDAN means PHysically
sections of tubing between fixed parts of the DANgerous to personnel.
structure of the aircraft. OR providing bends in the
tubing.
Explanation. AC65-9A Question Number. 28. A 3/8 inch aircraft
high pressure flexible hose compared to a 3/8 inch
metal tubing used in the same system will.
Question Number. 25. Flexible hose used
in aircraft systems is classified in size according to Option A. have equivalent flow
the. characteristics.
Option A. outside diameter. Option B. have about the same OD.
Option B. inside diameter. Option C. usually have interchangeable
Option C. wall thickness. applications.
Correct Answer is. inside diameter. Correct Answer is. have equivalent flow
Explanation. NIL. characteristics.
Explanation. NIL.

Question Number. 26. Which tubings 06b. Pipes and Unions.

have the characteristics (high strength, abrasion
resistance) necessary for use in a high pressure
(3,000 PSI) hydraulic system for operation of Question Number. 1. How do you
landing gear and flaps?. assemble a banjo hose?.
Option A. 1100-1/2H or 3003-1/2H Option A. Put a washer on the outside of the
aluminium alloy. banjo only.
Option B. Corrosion resistant steel annealed Option B. Put a washer on the inside of the
1/4H. banjo only.
Option C. 2024-T or 5052-0 aluminium alloy. Option C. Put washer either side of the
banjo.
Correct Answer is. Corrosion resistant steel Correct Answer is. Put washer either side of
annealed 1/4H. the banjo.
Explanation. NIL. Explanation. NIL.

Question Number. 27. A gas or fluid line Question Number. 2. A 0.5 in. diameter
marked with the letters PHDAN. pipe is to be joined using standard nuts and
Page

fittings. What coupling would you use?.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Option A. AN8-8852-1. Question Number. 6. A butyl rubber seal

Option B. AN8-8852-2. is made from.
5(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Option C. AN8-8852-8. Option A. silicon rubber.

Correct Answer is. AN8-8852-8. Option B. synthetic rubber.
Explanation. Pipes are graded in 1/16 inch Option C. latex natural rubber.
steps. The last dash number is the number of Correct Answer is. synthetic rubber.
16ths. i.e. 8/16 = 0.5 inches. Explanation. NIL.

Question Number. 3. To install a Question Number. 7. What is the colour

flareless coupling. of an AN steel flared-tube fitting?.
Option A. turn until torque is felt plus 3 flats Option A. Black.
(half turn). Option B. Red.
Option B. hand tight plus 2 flats. Option C. Blue.
Option C. turn until torque is felt plus 2 flats. Correct Answer is. Black.
Explanation. Steel AN fittings are black,
Correct Answer is. turn until torque is felt aluminium AN fittings are blue.
plus 2 flats.
Explanation. BL/6-15 9.3.
Question Number. 8. Which statement
about Military Standard (MS) flareless fittings is
Question Number. 4. A Skydrol correct?.
hydraulic seal would be made of. Option A. During installation, MS flareless
Option A. butyl rubber, ethelene propylene fittings are normally tightened by turning the nut a
or Teflon Phosphate Ester based. specified amount after the sleeve and fitting
Option B. natural rubber vegetable based. sealing surface have made contact, rather than
Option C. synthetic rubber mineral based. being torqued.
Correct Answer is. butyl rubber, ethelene Option B. MS flareless fittings must be
propylene or Teflon Phosphate Ester based. tightened to a specific torque.
Explanation. CAIPs AL/3-21. Option C. MS flareless fittings should not be
lubricated prior to assembly.
Correct Answer is. MS flareless fittings must
Question Number. 5. Adapter nipples be tightened to a specific torque. OR During
are not required on. installation, MS flareless fittings are normally
Option A. pipe to externally coned adapter. tightened by turning the nut a specified amount
after the sleeve and fitting sealing surface have
Option B. pipe to pipe coupling. made contact, rather than being torqued.
Option C. pipe to internally coned adapter. Explanation. NIL.

Correct Answer is. pipe to externally coned

adapter. Question Number. 9. A flexible sealing
Explanation. BL/6-15 Figure 1. element subject to motion is a.
Option A. gasket.
Page

Option B. packing.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Option C. compound. Question Number. 4. A spring should be

Correct Answer is. packing. inspected for correct.
6(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Explanation. NIL. Option A. length, strength and squareness.

07. Springs. Option B. width, strength and squareness.

Option C. width, length and strength.
Correct Answer is. length, strength and
Question Number. 1. Coil springs are squareness.
made from. Explanation. NIL.
Option A. carbon or alloy steels with high
working stress. 08. Bearings.
Option B. low carbon steels with high
working stress.
Option C. carbon or high alloy steels with Question Number. 1. Needle roller
low working stress. bearings.
Correct Answer is. carbon or high alloy steels Option A. can accept a small amount of
with low working stress. misalignment.
Explanation. Spring steel is hardened (therefore Option B. are susceptible to brinelling.
high carbon) steel or alloy steel and work under Option C. are designed to carry axial loads.
low stress so they remain within the elastic region.
Correct Answer is. are susceptible to
brinelling.
Question Number. 2. What load are Explanation. NIL.
spring hooks subjected to?.
Option A. Bending.
Option B. Tension. Question Number. 2. When rotating a
Option C. Compressive. ball bearing by hand, a regular click indicates.
Correct Answer is. Bending.
Explanation. Spring hooks are under bending Option A. a cracked ring.
stress. Option B. damage to the balls.
Option C. intergranular corrosion in the
outer ring.
Question Number. 3. Steel music wire is. Correct Answer is. a cracked ring.
Explanation. NIL.
Option A. used for lower strength springs.
Option B. made of high carbon or nickel
alloy. Question Number. 3. A journal load is.
Option C. used for high strength springs and
as progressive-rate springs. Option A. compression.
Correct Answer is. used for lower strength Option B. radial.
springs. Option C. axial.
Explanation. NIL. Correct Answer is. radial.
Explanation. NIL.
Page

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Question Number. 4. What kind of

7(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

bearing is used in a landing system?. Question Number. 8. A Hardy Spicer

Option A. Needle roller bearing. coupling has what type of bearings?.
Option B. Tapered roller bearing. Option A. Ball Bearings.
Option C. Caged ball bearing. Option B. Needle bearings.
Correct Answer is. Tapered roller bearing. Option C. Plain bearings.
Explanation. NIL. Correct Answer is. Needle bearings.
Explanation. A hardy splicer is a universal
coupling as found on vehicle drive shafts and they
Question Number. 5. Spherical roller are fitted with needle bearings.
bearings resist what loads?.
Option A. Large radial but no thrust.
Option B. Large radial and moderate thrust. Question Number. 9. A self aligning
bearing is a.
Option C. Large thrust and moderate radial. Option A. angular bearing.
Option B. precision bearing.
Correct Answer is. Large radial and moderate Option C. radial bearing.
thrust. Correct Answer is. radial bearing.
Explanation. Radial' means outward, 'thrust' Explanation. A self aligning bearing is a radial
means axial. BL/6-14 2.3.3. bearing.

Question Number. 6. Where are needle Question Number. 10. A crankshaft

roller bearings used?. would be fitted with a.
Option A. High speed operations. Option A. cylindrical roller bearing.
Option B. Where is fluid damped bearing Option B. taper roller bearing.
used. Option C. spherical roller bearing.
Option C. Where there are space Correct Answer is. spherical roller bearing.
restrictions. Explanation. CAIP BL/5-2 para. 2.2.3.
Correct Answer is. Where there are space
restrictions.
Explanation. Needle roller bearings are used Question Number. 11. Where heat is
where there are space restrictions. likely to be transmitted through a bearing.

Option A. group 2 bearings are used.

Question Number. 7. Loads on tapered Option B. group 4 bearings are used.
roller bearings are. Option C. group 3 bearings are used.
Option A. thrust only. Correct Answer is. group 4 bearings are used.
Option B. radial only.
Option C. radial and thrust. Explanation. Group 4 bearings have the
Correct Answer is. radial and thrust. greatest clearance.
Explanation. Taper roller bearings can take
Page

radial and thrust loads. BL/6-14 2.3.2.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Question Number. 12. Shielded ball

bearings are inspected by.
8(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Option A. running at operating speed and Question Number. 16. The stationary
listening for signs of wear. race of a journal bearing is normally.
Option B. dismantling and inspecting. Option A. a spigoted fit.
Option C. rotating slowly by hand. Option B. an interference fit.
Correct Answer is. rotating slowly by hand. Option C. a push fit.
Explanation. A feel test is the most likely Correct Answer is. an interference fit.
inspection. The run test is not done at operating Explanation. BL/6-14 5.1.
speed.

Question Number. 17. Inspection of

Question Number. 13. Thrust bearings bearings is normally carried out.
take. Option A. in situ.
Option A. radial loads. Option B. when dismantled.
Option B. journal loads. Option C. when removed from an assembly.
Option C. sideloads.
Correct Answer is. sideloads. Correct Answer is. in situ.
Explanation. Thrust bearings take side loads. Explanation. BL/6-14 6.2.

Question Number. 14. A single row ball Question Number. 18. Damage to the
bearing is best suited to accepting. shield of a bearing should result in.
Option A. radial loads only. Option A. no action.
Option B. axial loads only. Option B. replacement of the shield.
Option C. axial and radial Loads. Option C. rejection of the bearing.
Correct Answer is. radial loads only. Correct Answer is. rejection of the bearing.
Explanation. A single row ball bearing carries
radial loads only BL/6-14 2. Explanation. BL/6-14 6.2.1 (iii).

Question Number. 15. Taper roller Question Number. 19. A watermark on a

bearings are used for which of the following bearing indicates.
purposes?. Option A. bearing running dry.
Option A. To transmit radial loads whilst Option B. intergranular corrosion.
resisting axial movement. Option C. lack of lubrication.
Option B. To transmit thrust loads with radial Correct Answer is. intergranular corrosion.
loads. Explanation. Intergranular corrosion (on some
Option C. To permit axial movement whilst stainless steels) looks like a thin line on the surface
resisting radial load. of the metal - known as water stain.
Correct Answer is. To transmit thrust loads
with radial loads.
Explanation. Taper roller bearings transmit Question Number. 20. Needle bearings
Page

thrust and radial loads equally. BL/6-14 Para.2.3.2. resist.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Option A. radial and axial load. Option B. white.

Option B. axial load only. Option C. pink.
9(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Option C. radial load only. Correct Answer is. blue.

Correct Answer is. radial load only. Explanation. NIL.
Explanation. NIL.
09. Transmissions.

Question Number. 21. When silica gel has

absorbed moisture the colour changes to. Question Number. 1. How do you check
a chain for elongation?.
Option A. pink. Option A. Apply a load, measure chain and
Option B. white. use 5% max formula to check extension.
Option C. blue. Option B. Apply a load, measure chain and
Correct Answer is. pink. use 2% max formula to check extension.
Explanation. CAAIPs Leaflet 1-8 Page 3. Option C. Hang the chain under its own
weight, measure chain and use 2% max formula to
check extension.
Question Number. 22. A thrust bearing is Correct Answer is. Apply a load, measure
designed so that. chain and use 2% max formula to check extension.
Option A. it transmits radial loads, therefore
limiting axial movement. Explanation. CAAIPS Leaflet 5-4 para 6.3.
Option B. it transmits axial loads, therefore
limiting radial movement.
Option C. it transmits axial loads, therefore Question Number. 2. How do you store
limiting axial movement. a chain?.
Correct Answer is. it transmits axial loads, Option A. Oiled and coiled in greaseproof
therefore limiting axial movement. paper.
Explanation. NIL. Option B. Lay uncoiled and flat in
greaseproof paper.
Option C. Hanged so they do not kink.
Question Number. 23. Lubrication of Correct Answer is. Oiled and coiled in
roller bearings and needle bearings are. greaseproof paper.
Option A. at low pressure via a tube. Explanation. CAAIPs leaflet 5-4 para 6.7.
Option B. under pressure.
Option C. by hand.
Correct Answer is. by hand. Question Number. 3. Epicyclic gears are
Explanation. But it depends what type of used on.
lubricant is used and the bearing application. Option A. shafts rotating on axis 90 degrees
from each other.
Option B. shafts rotating on the same axis.
Question Number. 24. Silica gel is used
for moisture control during storage, when Option C. shafts rotating on offset axis.
serviceable it is coloured. Correct Answer is. shafts rotating on the
Page

Option A. blue. same axis.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Explanation. A turboprop reduction gearbox is a

good example of an epicyclic gear system. Question Number. 7. How is the change
10(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

in direction of a control chain, in two planes,

achieved?.
Question Number. 4. What is the Option A. By using a pulley.
purpose of the guard, where a control chain goes Option B. By using bi-planer blocks.
around a sprocket?. Option C. By using spring clips.
Option A. Stops the chain coming off if it Correct Answer is. By using bi-planer blocks.
goes slack.
Option B. Protects personnel when carrying Explanation. AL/3-2 Figure 4.
out maintenance.
Option C. Prevents entry of foreign bodies.
Question Number. 8. How is a non-
Correct Answer is. Stops the chain coming off reversible chain different from a normal chain?.
if it goes slack.
Explanation. NIL. Option A. By use of a chain guard.
Option B. Every second outer plate is
extended in one direction.
Question Number. 5. Worm drives Option C. Different end fittings.
operate in shafts which are. Correct Answer is. Every second outer plate is
Option A. 90 degrees to each other and in a extended in one direction.
differing plane. Explanation. AL/3-2.
Option B. 90 degrees to each other and in
the same plane.
Option C. parallel to each other and in the Question Number. 9. When not under
same plane. load where should a pair of gears sit?.
Correct Answer is. 90 degrees to each other Option A. In the middle.
and in a differing plane. Option B. On the toe.
Explanation. NIL. Option C. On the heel.
Correct Answer is. In the middle.
Explanation. NIL.
Question Number. 6. The pattern of a
gear is the.
Option A. the path they take when the gear Question Number. 10. For a pair of gears
is rotating. to operate properly, they must have.
Option B. profile of the gear teeth. Option A. lash and pattern.
Option C. mark it leaves on a mating gear. Option B. end play and thrust.
Correct Answer is. mark it leaves on a mating Option C. pattern and profile.
gear. Correct Answer is. lash and pattern.
Explanation. The test involves painting the Explanation. See Jeppesen Helicopter
surface of a gear tooth then running the gear, then Maintenance.
inspecting the 'pattern' worn into the painted
surface.
Page

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Question Number. 11. The teeth on the Question Number. 15. A feather key
smaller wheel of a bevel gear are called the. locates a gear on a shaft and permits.
11(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Option A. positive drive and axial movement.

Option A. heel.
Option B. toe. Option B. positive drive with the gear firmly
Option C. foot. locked.
Correct Answer is. toe. Option C. a positive and strong drive for
Explanation. See Jeppesen Helicopter transmissions.
Maintenance. Correct Answer is. positive drive and axial
movement.
Explanation. A feather key allows axial
Question Number. 12. The correct movement.
meshing of gears is found by observing the marks
made during a gear mesh test. On what part of the
tooth should the marks be?. Question Number. 16. A worm drive
Option A. Top. creates.
Option B. Bottom. Option A. a drive in 2 planes and transmits
Option C. Middle. both directions.
Correct Answer is. Middle. Option B. a drive in 1 plane but transmits
Explanation. See Jeppesen Helicopter both directions.
Maintenance. Option C. a drive in 2 planes but transmits 1
direction only.
Correct Answer is. a drive in 2 planes but
Question Number. 13. What type of gear transmits 1 direction only.
would be used on a propeller reduction gearbox?. Explanation. NIL.

Option A. Split epicyclic.

Option B. Bevel. Question Number. 17. The teeth of a gear
Option C. Epicyclic. would normally be.
Correct Answer is. Epicyclic. Option A. nitrided.
Explanation. NIL. Option B. tempered.
Option C. case hardened.
Correct Answer is. case hardened.
Question Number. 14. Where would you Explanation. Hardening right through the gear
find the inspection interval for chains?. teeth would make them brittle and tend to break.
Option A. Overhaul manual.
Option B. Maintenance schedule.
Option C. Maintenance manual.
Correct Answer is. Maintenance schedule. Question Number. 18. If a chain is
Explanation. Time intervals are only in the removed for routine maintenance.
Maintenance Schedule. Option A. it must be proof checked to full
load.
Option B. it must be proof checked to ½ max
Page

load.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Option C. it does not have to be proof Option B. stretching out and measuring.
checked. Option C. running the chain over a finger by
12(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

Correct Answer is. it does not have to be 180 degrees.

proof checked. Correct Answer is. running the chain over a
Explanation. AL/3-2 6.6. finger by 180 degrees.
Explanation. AL/3-2 6.4.

Question Number. 19. On gear teeth, the

wear pattern should be. Question Number. 23. During an
Option A. the middle of the tooth most inspection interval one segment of a long chain is
worn. found to be defective, the solution to this is to.
Option B. even from top to bottom.
Option C. the top edge most worn. Option A. replace 3 segment either side of
Correct Answer is. the middle of the tooth the deficiency.
most worn. Option B. replace the whole chain.
Explanation. NIL. Option C. replace the particular segment and
run components to check for serviceability.
Correct Answer is. replace the whole chain.
Question Number. 20. On bevel gear
teeth, the wear pattern should be. Explanation. The chain cannot be repaired. It
Option A. at the centre of the tooth. must be replaced. Leaflet 5-4.
Option B. greatest at the heel, least at the
toe.
Option C. greatest at the toe, tapering off to Question Number. 24. The teeth of a gear
the heel. would normally be.
Correct Answer is. at the centre of the tooth. Option A. tempered.
Option B. case hardened.
Explanation. NIL. Option C. nitrided.
Correct Answer is. case hardened.
Explanation. The teeth of a gear are normally
Question Number. 21. Bevel gears are. case hardened by flame cooling and water spray
quenching.
Option A. all over case hardened.
Option B. heel is hardened.
Option C. toe is hardened. Question Number. 25. Non-reversible
Correct Answer is. all over case hardened. chains can.
Explanation. Bevel gears are all over case Option A. only be moved in one direction.
hardened. Option B. only be fitted in one direction.
Option C. not be fitted through pressure
bulkheads.
Question Number. 22. A chain is checked Correct Answer is. only be fitted in one
for stiff links by. direction.
Option A. hanging by hand by measure and Explanation. Leaflet 5-4 4.3.2.
Page

sight.

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
 WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 6 PART -6

Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material

Question Number. 26. The large diameter Question Number. 30. The clutch which
13(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available

on a bevel gear is called the. can overrun the driving member, is known as.
Option A. foot.
Option B. toe. Option A. overload clutches.
Option C. heel. Option B. no-slip clutches.
Correct Answer is. heel. Option C. freewheel clutches.
Explanation. The large diameter is the heel, the Correct Answer is. freewheel clutches.
small diameter is the toe. Explanation. NIL.

Question Number. 27. How do you check Question Number. 31. A gear system, or
a chain for elongation?. gear train, is made up of gears that are.
Option A. Lay flat on a table, apply tensile Option A. driven and driver.
load and measure. Option B. idler.
Option B. Adjust the end fittings. Option C. driven, driver and idler.
Option C. Hang chain up, check sight line and Correct Answer is. driven, driver and idler.
measure. Explanation. NIL.
Correct Answer is. Lay flat on a table, apply
tensile load and measure.
Explanation. CAAIPs Leaflet 5-4 para 6.3.

Question Number. 28. Drive planes on an

epicyclic gear are.
Option A. around a common axis of the
plane.
Option B. at different angles to the plane.
Option C. at right angles to the plane.
Correct Answer is. around a common axis of
the plane.
Explanation. NIL.

Question Number. 29. Compared with

the spur gears, spiral gears have.
Option A. have mechanical advantages.
Option B. less stress concentration on gears.

Option C. more wear resistance.

Correct Answer is. less stress concentration
on gears.
Explanation. NIL.
Page

DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM