SFH 213 Datasheet
SFH 213 Datasheet
SFH 213 Datasheet
SFH 213
Features:
• Wavelength range (S10%) 400 nm to 1100 nm
• Short switching time (typ. 5 ns)
• 5 mm LED plastic package
Applications
• High speed photointerrupters
• Industrial electronics
• For control and drive circuits
Ordering Information
Type: Photocurrent Ordering Code
IP [µA]
VR = 5 V, Std. Light A, EV =
1000 lx
SFH 213 135 (≥ 100) Q62702P0930
2015-12-23 1
Version 1.3 SFH 213
2015-12-23 2
Version 1.3 SFH 213
80
60
40
20
0
400 600 800 1000 nm 1200
λ
2015-12-23 3
Version 1.3 SFH 213
120
100
80
60
40
20
0
0 20 40 60 80 ˚C 100
TA
2015-12-23 4
Version 1.3 SFH 213
Package Outline
9.0 (0.354)
8.2 (0.323) 7.8 (0.307)
7.5 (0.295)
Area not flat
ø5.1 (0.201)
ø4.8 (0.189)
Dimensions in mm (inch).
Package
5mm Radial (T 1 ¾), Epoxy
2015-12-23 5
Version 1.3 SFH 213
Approximate Weight:
0.4 g
Note
Packing information is available on the internet (online product catalog).
Recommended Solder Pad
Dimensions in mm.
Note:
pad 1: anode
2015-12-23 6
Version 1.3 SFH 213
TTW Soldering
IEC-61760-1 TTW
OHA04645
300
˚C 10 s max., max. contact time 5 s per wave
50
0
0 20 40 60 80 100 120 140 160 180 200 220 s 240
t
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2015-12-23 7
Version 1.3 SFH 213
Glossary
1)
Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2015-12-23 8
Version 1.3 SFH 213
2015-12-23 9