Karnal SBR 20 MLD - R0!23!05-18 - Client

23.05.
2018 R0 For Approval KA

DATE REV. NO. DESCRIPTION Prepare
REVISIONS
M/S. TATA PROJECTS LIMITED
CLIENT :
MUNCIPAL CORPORATION, KARNAL

MUNCIPAL CORPORATION, KARNAL
PROJECT :
20 MLD SEWAGE TREATMENT PLANT BASED ON SBR TECHNOLOGY AT KARNAL
TITLE :
NAME SIGN DATE
PRED KA 23.05.2018
CHKD MB 23.05.2018
STRUCTURAL DESIGN CALCULATION OF SEQUENTIAL
APPD PK 23.05.2018
DOC.No. T A T A - K A R N A L 2 0 - S B R - D C - 0 2
KA MB PK
Prepared Checked Approved
KARNAL
F SEQUENTIAL BATCH REACTOR
SIZE REV.
A4 0
DOCUMENT NO.
20 MLD SEWAGE TREATMENT PLANT BASED
PROJECT: ON SBR TECHNOLOGY AT KARNAL TATA-KARNAL20-SBR-DC-02
DATE 23.05.2018
STRUCTURAL DESIGN CALCULATION OF
TITLE: SEQUENTIAL BATCH REACTOR REV R0
CONTENTS
S Description Page No
No
1 INTRODUCTION AND DESIGN BASIS 4
2 HYDRODYNAMIC CALCULATIONS FOR SBR BASIN 5
3 DESIGN OF WALL W1 AND FOOTING 24
4 DESIGN OF WALL W1A AND DECANTER FOOTING 44
5 DESIGN OF WALL W1D AND FOOTING 72
10 DESIGN OF WALL W7 161
11 DESIGN OF CHANNEL ON WALL W1D 171
12 DESIGN OF SLABS 176
13 DESIGN OF BEAMS 179
14 DESIGN OF BRACKETS SUPPORTING PIPE 184
15 DESIGN OF STAIRCASE 188
16 DESIGN OF COLUMNS 192
17 SOIL REPORT RECOMMENDATIONS 195

UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
SCOPE OF DESIGN REPORT
This document contains design calculations for Sequential Batch Reactor for
20MLD STP at Karnal
Design Method: STAAD Model has been prepared for Decanter Columns &
Beams. Reactions are used in the excel sheet for design of Decanter footing.
Design of walls has been done using coefficients from IS 3370 (Part 4). Slabs,
Footings and other components have been designed using standard excel sheets.
Hydrodyamnic loads have been added to the calculated moments in Design
sheets.
Limiting Crack width has been taken as 0.2 mm
DESIGN CODES & REFERENCES

IS : 456-2000 Code of Practice for Plain and Reinforced Concrete
IS : 3370 - 2009 Code of Practice for for Concrete Structures for Storage of
Liquids
SP : 16 Design Aids for Reinforced Concrete
IS : 1893 - 2014 Criteria for Earthquake Resistant Design of Structures

(Part 2)
IS : 13920 - 1993 Ductile Detailing of Reinforced Concrete Structures
subjected to Seismic Forces
DESIGN CONSTANTS
Characteristic cube strength of Concrete, fck
Yield Strength of Steel, fy
Limiting Crack Width, w
Limiting moment of resistance index, Mu/(fck*b*d^2)
Unit Weight of Liquid, rw
Unit Weight of Soil, rs
Coefficient of lateral pressure due to soil, k
Clear Cover on Water Face

DOCUMENT NO.
DATE 23.05.2018
Clear Cover on Soil Face
Clear Cover Footing Base Slab
Clear Cover for Waist Slab of Staircase
Natural Ground Level (NGL) =
Formation Ground Level (FGL) =
Depth of Footing below NGL =
Net Safe Bearing Capacity at 1.1 m from NGL
Gross Bearing Capacity at 1.1 m from NGL 84.6+18x1.1
Net Safe Bearing Capacity at 0.5 m from NGL
Gross Bearing Capacity at 0.5 m from NGL 56+18x0.5
Wall Footings have been designed to rest at a depth of 1.1 m below NGL except
for walls W4 and W6, which are resting at 0.5 m below NGL.
Analysis of wall footing has been done along with the design of respective walls to
show that bearing pressures are within the allowable SBC.
Grade Slab is resting at a depth of 0.5 m below NGL.
Loads acting from top of Grade Slab to the bottom of PCC are as below:
Weight of water = 5x10
SW of Grade Slab = 25x0.2
Weight of PCC = 24x0.1
TOTAL LOAD = 50+5+2.4
Total load is less than Gross SBC at this level. Hence OK.
DOCUMENT NO.
DATE 23.05.2018
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
30 N/mm2
500 N/mm2
0.2 mm
0.133
10.3 kN/m3
18.0 kN/m3
0.33
50 mm
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
30 mm
50 mm
25 mm
243.00 m
243.00 m
1.10 m
84.6 kN/m2
104.4 kN/m2
56.0 kN/m2
65.0 kN/m2
50.0 kN/m2
5.0 kN/m2
2.4 kN/m2
57.4 kN/m2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
20 MLD SEWAGE TREATMENT PLANT BASED ON
PROJECT: SBR TECHNOLOGY AT KARNAL TATA-KARNAL20-SBR-DC-02
DATE 23.05.2018
HYDRODYNAMIC
CALCULATIONS FOR SBR BASIN
MENT NO.
AL20-SBR-DC-02
23.05.2018
R0
BASIN
DOCUMENT NO.
DATE 23.05.2018
HYDRODYNAMIC LOADS FOR 29.0 M WALL
Grade of concrete
Density of concrete
Unit weight of Liquid
Acceleration due to gravity
Density of Liquid
Earthquake zone
Shape of Tank
Dimenson of Tank in XX Direction =
Dimenson of Tank in YY Direction =
Wall Height hw
Liquid Height h
Average Thickness of Wall
Average Thickness of Raft tb
Projection of Raft
Thickness of Top Cover Slab =
Area of Base (29+(0.5x2)+2)x(57+(0.5x2)+2)
WEIGHT CALCULATIONS
DOCUMENT NO.
DATE 23.05.2018
a) Weight of Tank Walls 2x((29+0.5)+(57+0.5))x5.5x0.5x25
Mass of Tank Walls mw
b) Weight of Base Raft 1920x0.3x25
Mass of Base Raft mb
c) Dead Load of Superstructure 0
Mass of Superstructure mt
d) Weight of Liquid in Tank 29x57x10.3x5
Mass of Liquid in Tank m
PARAMETERS OF SPRING MASS MODEL
Analysis along Length, X-axis
Height of Liquid, h = 5.00 m L = 29.00 m
B= 57.00 m
h/L = 5/29
mi/m= Refer fig 3(a) of IS 1893 Part 2
mi = 0.199x8677828.75
mc/m= Refer fig 3(b) of IS 1893 Part 2
mc = 0.76x8677828.75
DOCUMENT NO.
DATE 23.05.2018
hi/h= Refer fig 2(b) of IS 1893 Part 2

hi = 0.375x5
hc/h= Refer fig 2(b) of IS 1893 Part 2
hc = 0.512x5
hi*/h= Refer fig 2(b) of IS 1893 Part 2
hi*= 2.387x5
hc*/h= Refer fig 2(b) of IS 1893 Part 2
hc*= 3.8x5
19.9 % of liquid participates in impulsive mode
76 % participates in convective mode
Total of impulsive and convective mass is about 4.1 % less than mass of liquid
TIME PERIOD
Calculating Value of d for a cantilever wall
d = deflection of the tank wall on the vertical center-line at a height of h, when

loaded by uniformly distributed pressure of intensity q
ACI 350.3 (2001) and NZS 3106 (1986) have suggested a simpler approach for
obtaining deflection, d for tanks without roof. As per this approach, assuming that
wall takes pressure q by cantilever action, one can find the deflection, d, by
considering wall strip of unit width and height _h , which is subjected to
concentrated load, P = q h
DOCUMENT NO.
DATE 23.05.2018
mmw = 57x5.5x0.5x25x10.3x1000/9.81
`h = ((1726888/2)x1.88+4114488x(5.5/2))/((1726888/2)+4114488)
q= ((((1726888/2+4114488)x9.81)/(57x5))/1000)
P= 171.3x5x1
Modulus of Elasticity of concrete, E 5000*SQRT30*10^3
Moment of Inertia (Iw) 1x0.5^3/12
d= (856.5x2.599^3)/(3x27386127.88x0.01)
Time Period for Impulsive Mode
Time period in impulsive mode,

"T" _"i" "="
2𝜋√(𝑑/𝑔) 2x3.14xSQRT(0.018/9.81)
Time Period for Convective Mode
Cl 4.3.2.2 IS 1893 (Part 2), Fig 7 Cc
Tc= Cc (L/g) 5.02xSQRT(29/9.81)

DOCUMENT NO.
DATE 23.05.2018
DESIGN HORIZONTAL SEISMIC COFFICIENT
IS 1893 (Part I) Table 2, Zone = III Z
Importance Factor, Refer Table 1 of IS 1893 (Part 2) I
IS 1893 (Part 2) Table 3 R
Design Horizontal Seismic Coefficient for Impulsive Mode

(�_ℎ )_𝑖= �/2 �/�
(�_�/𝑔)_𝑖
Ti (sec) = 0.27 Damping = 5.0% Soil = Hard
IS 1893 (Part 1), Fig 2, (Sa/g)i =

(Ah)i = 0.16x1.5x2.5/(2x2.5)
Design Horizontal Seismic Coefficient for Convective Mode

(�_ℎ )_𝑐= �/2 �/�
(�_�/𝑔)_𝑐
Tc (sec) = 8.630 Damping = 0.5% Soil = Hard
Cl 4.5.2 Multiplying factor for 0.5% Damping
IS 1893 (Part 1), Fig 2, (Sa/g)c * 1.75 =

DOCUMENT NO.
DATE 23.05.2018
(Ah)c = 0.16x1.5x0.203/(2x2.5)
BASE SHEAR
Cl 4.6.1 Base shear at the bottom of wall in impulsive mode,

Vi = (Ah)i (mi+ mw + mt) g = (0.12x(1726888+1219470)x9.81)/1000
Cl 4.6.1 Base shear at the bottom of wall in convective mode,

Vc = (Ah)c (mc) g 0.01x6595150x9.81/1000
Cl 4.6.3 Total base shear, V= Vi2+Vc2 SQRT((3468.45^2)+(646.98^2))
Seismic Weight 11963+85129.5
Base Shear / Seismic Weight 3528.28/97092.5
HYDRODYNAMIC PRESSURE CALCULATIONS
Impulsive Hydrodynamic Pressure
Impulsive hydrodynamic pressure on wall for Rectangular tanks
Qib(x) = Sinh (1.732 x/L)/ cosh(0.866 L/h)
Cl 4.9.1(b) Piw(y) = Q iw (y) (Ah)i ρ g h

Qiw (y) = Coefficient of Impulsive Hydrodynamic Pressure on wall from Fig 9 (a)
corresponding to h/L = 0.172 at base of wall
Impulsive pressure at the base of wall
Piw (y = 0) = 0.87x0.12x1050x9.81x5/1000
Impulsive hydrodynamic pressure on the base slab (y = 0)
Qib= sinh(1.732 x / L) / cosh( 0.866 L/ h )
Pib=Qib(x)(Ahi)ρgh
DOCUMENT NO.
DATE 23.05.2018
(1.x0.12x1050x9.81x5)/1000
Convective Hydrodynamic Pressure
Convective hydrodynamic pressure on wall,
Cl 4.9.2(b) Pcw= Qcw(y) (Ah)c ρ g L
Qcw (y) = Coefficient of Convective Hydrodynamic Pressure on wall from Fig 11 (a)
corresponding to h/L = 0.172 at y = 0
Convective pressure at the base of wall
Pcw (y = 0) = 0.36x0.01x1050x9.81x29/1000
Qcw (y) = Coefficient of Convective Hydrodynamic Pressure from Fig 11 (b)

corresponding to h/L = 0.172 at y = h
Pcw (y = h) 0.417x0.01x1050x9.81x29/1000
Convective hydrodynamic pressure on the base slab
Cl 4.9.2(b) Pcb = Qcb (x) (Ah)c ρ g L

DOCUMENT NO.
DATE 23.05.2018
Qcb (x) = Coefficient of Convective Hydrodynamic Pressure on wall from Fig 11 (b)
corresponding to h/L = 0.172 at x = 0.5L
Convective pressure on top of base slab at x = 0.5L
Pcb = 0.325x0.01x1050x9.81x29/1000
Equivalent Linear Pressure Distribution
For stress analysis of tank wall, it is conveninet to have linear pressure
distribution along wall height. As per Section 4.9.4(GSDMA), equivalent
linear distribution for impulsive hydrodynamic pressure distribution
will be as follows:
Base shear due to impulsive liquid mass per unit length,
�_𝑖= ((�_ℎ ) (0.12x1726888x9.81/(2x57)/1000)

_𝑖�_𝑖 𝑔)/2�
Pressure at bottom and top is given by,
�_𝑖= (�_𝑖
(4ℎ−6ℎ_𝑖))/ℎ^2
DOCUMENT NO.
DATE 23.05.2018
�_𝑖= (�_𝑖
(4ℎ−6ℎ_𝑖))/ℎ^2 17.83x(4x5-6x1.88)/(5^2)
�_𝑖= (�_𝑖 17.83x(6x1.88-2x5)/(5^2)

(6ℎ_𝑖−2ℎ))/ℎ^2
Total Impulsive Load =
Height of CG from bottom =
Additional Moment at Bottom =
Equivalent linear impulsive pressure distribution is shown below:

0.91
kN/m2
5.38 6.22
kN/m2 kN/m2
Ht from CG of load
Pressure Total Load Moment
Bottom from Bottom
4.13 1.84 0.39 1.20 0.47
2.75 3.30 0.91 4.74 4.32
1.38 4.76 1.40 10.28 14.41
0.00 6.22 1.88 17.83 33.50

�_𝑐= ((�_ℎ )_𝑐�_𝑐
𝑔)/2� (0.01x6595150x9.81/(2x57)/1000)

DOCUMENT NO.
DATE 23.05.2018
�_𝑐= (�_𝑐
(4ℎ−6ℎ_𝑐))/ℎ^2 5.68x(4x5-6x2.56)/(5^2)
�_𝑐= (�_𝑐 5.68x(6x2.56-2x5)/(5^2)

(6ℎ_𝑐−2ℎ))/ℎ^2
Total Convective Load =
Equivalent linear convective pressure distribution is shown below:
1.22
1.24 kN/m2
kN/m2
1.08 1.05
kN/m2 kN/m2
Ht from CG of load
Bottom from Bottom
4.13 1.19 0.44 1.05 0.46
2.75 1.14 1.14 2.66 3.02
1.38 1.10 1.84 4.20 7.75

DOCUMENT NO.
DATE 23.05.2018
0.00 1.05 2.56 5.68 14.54
SLOSHING WAVE HEIGHT
Cl 4.11 Maximum wave height,

dmax = (Ah)c R L /2 0.01x2.5x29/2
Hence, Sloshing height is less than Free board height of 0.5m
ANCHORAGE REQUIREMENT
h/ D =
Cl 4.12 1/(Ah)i = 1/0.12
Since h/D < 8.3, No anchorage is required

DOCUMENT NO.
DATE 23.05.2018
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
M-30
25 kN/m3
10.3 kN/m3
9.81 m/s2
1050 kg/m3
III
Rectangular
29.00 m
57.00 m
5.50 m
5.00 m
0.50 m
0.30 m
2.00 m
0.00 m
1920.00 m2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
11963.00 kN
1219470.00 kg
14400.00 kN
1467889.91 kg
0 kN
0 kg
85129.50 kN
8677828.75 kg
0.172
0.199
1726888 kg
0.760
6595150 kg
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.375 m
1.88 m
0.512
2.56
2.387
11.94 m
3.800
19.00 m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
4114488.0 kg/m3
2.60 m
171.30 kN/m2
856.50 kN
2.74E+07 kN/m2
0.0104 m4
0.01760 m
0.27 sec
5.02
8.630 Sec
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.16
1.5
2.5
2.5
0.12
1.75
0.20
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.01
3468.45 kN
646.98 kN
3528.28 kN
97092.50 kN
3.63%
0.87
5.38 kN/m2
1.000
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
6.2 kN/m2
0.36
1.08 kN/m2
0.4165
1.24 kN/m2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.33
0.97 kN/m2
17.83 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
6.22 kN/m2
0.91 kN/m2
17.83 kN/m
1.88 m
33.50 kN-m/m
5.68 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
1.05 kN/m2
1.22 kN/m2
5.68 kN/m
2.56 m
14.54 kN-m/m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.36 m
0.172
8.3
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
HYDRODYNAMIC LOADS FOR 57.0 M WALL
Grade of concrete
Density of concrete
Unit weight of Liquid
Acceleration due to gravity
Density of Liquid
Earthquake zone
Shape of Tank
Dimenson of Tank in XX Direction =
Dimenson of Tank in YY Direction =
Wall Height hw
Liquid Height h
Average Thickness of Wall
Average Thickness of Raft tb
Projection of Raft
Thickness of Top Cover Slab =
Area of Base (29+(0.5x2)+2)x(57+(0.5x2)+2)
WEIGHT CALCULATIONS
DOCUMENT NO.
DATE 23.05.2018
a) Weight of Tank Walls 2x((29+0.5)+(57+0.5))x5.5x0.5x25
Mass of Tank Walls mw
b) Weight of Base Raft 1920x0.3x25
Mass of Base Raft mb
c) Dead Load of Superstructure 0
Mass of Superstructure mt
d) Weight of Liquid in Tank 29x57x10.3x5
Mass of Liquid in Tank m
PARAMETERS OF SPRING MASS MODEL
Analysis along Length, X-axis
Height of Liquid, h = 5.00 m L = 57.00 m
B= 29.00 m
h/L = 5/57
mi/m= Refer fig 3(a) of IS 1893 Part 2
mi = 0.101x8677828.75
mc/m= Refer fig 3(b) of IS 1893 Part 2
mc = 0.814x8677828.75
DOCUMENT NO.
DATE 23.05.2018
hi/h= Refer fig 2(b) of IS 1893 Part 2

hi = 0.375x5
hc/h= Refer fig 2(b) of IS 1893 Part 2
hc = 0.503x5
hi*/h= Refer fig 2(b) of IS 1893 Part 2
hi*= 4.811x5
hc*/h= Refer fig 2(b) of IS 1893 Part 2
hc*= 13.5x5
10.1 % of liquid participates in impulsive mode
81.4 % participates in convective mode
Total of impulsive and convective mass is about 8.5 % less than mass of liquid
TIME PERIOD
Calculating Value of d for a cantilever wall
d = deflection of the tank wall on the vertical center-line at a height of h, when

loaded by uniformly distributed pressure of intensity q
ACI 350.3 (2001) and NZS 3106 (1986) have suggested a simpler approach for
obtaining deflection, d for tanks without roof. As per this approach, assuming that
wall takes pressure q by cantilever action, one can find the deflection, d, by
considering wall strip of unit width and height _h , which is subjected to
concentrated load, P = q h
DOCUMENT NO.
DATE 23.05.2018
mmw = 29x5.5x0.5x25x10.3x1000/9.81
`h = ((876461/2)x1.88+2093336x(5.5/2))/((876461/2)+2093336)
q= ((((876461/2+2093336)x9.81)/(29x5))/1000)
P= 171.3x5x1
Modulus of Elasticity of concrete, E 5000*SQRT30*10^3
Moment of Inertia (Iw) 1x0.5^3/12
d= (856.5x2.599^3)/(3x27386127.88x0.01)
Time Period for Impulsive Mode
Time period in impulsive mode,

"T" _"i" "="
2𝜋√(𝑑/𝑔) 2x3.14xSQRT(0.018/9.81)
Time Period for Convective Mode
Cl 4.3.2.2 IS 1893 (Part 2), Fig 7 Cc
Tc= Cc (L/g) 6.79xSQRT(57/9.81)

DOCUMENT NO.
DATE 23.05.2018
DESIGN HORIZONTAL SEISMIC COFFICIENT
IS 1893 (Part I) Table 2, Zone = III Z
Importance Factor, Refer Table 1 of IS 1893 (Part 2) I
IS 1893 (Part 2) Table 3 R
Design Horizontal Seismic Coefficient for Impulsive Mode

(�_ℎ )_𝑖= �/2 �/�
(�_�/𝑔)_𝑖
Ti (sec) = 0.27 Damping = 5.0% Soil = Hard
IS 1893 (Part 1), Fig 2, (Sa/g)i =

(Ah)i = 0.16x1.5x2.5/(2x2.5)
Design Horizontal Seismic Coefficient for Convective Mode

(�_ℎ )_𝑐= �/2 �/�
(�_�/𝑔)_𝑐
Tc (sec) = 16.370 Damping = 0.5% Soil = Hard
Cl 4.5.2 Multiplying factor for 0.5% Damping
IS 1893 (Part 1), Fig 2, (Sa/g)c * 1.75 =

DOCUMENT NO.
DATE 23.05.2018
(Ah)c = 0.16x1.5x0.107/(2x2.5)
BASE SHEAR
Cl 4.6.1 Base shear at the bottom of wall in impulsive mode,

Vi = (Ah)i (mi+ mw + mt) g = (0.12x(876461+1219470)x9.81)/1000
Cl 4.6.1 Base shear at the bottom of wall in convective mode,

Vc = (Ah)c (mc) g 0.005x7063753x9.81/1000
Cl 4.6.3 Total base shear, V= Vi2+Vc2 SQRT((2467.33^2)+(346.48^2))
Seismic Weight 11963+85129.5
Base Shear / Seismic Weight 2491.54/97092.5
HYDRODYNAMIC PRESSURE CALCULATIONS
Impulsive Hydrodynamic Pressure
Impulsive hydrodynamic pressure on wall for Rectangular tanks
Qib(x) = Sinh (1.732 x/L)/ cosh(0.866 L/h)
Cl 4.9.1(b) Piw(y) = Q iw (y) (Ah)i ρ g h

Qiw (y) = Coefficient of Impulsive Hydrodynamic Pressure on wall from Fig 9 (a)
corresponding to h/L = 0.088 at base of wall
Impulsive pressure at the base of wall
Piw (y = 0) = 0.87x0.12x1050x9.81x5/1000
Impulsive hydrodynamic pressure on the base slab (y = 0)
Qib= sinh(1.732 x / L) / cosh( 0.866 L/ h )
Pib=Qib(x)(Ahi)ρgh
DOCUMENT NO.
DATE 23.05.2018
(1.x0.12x1050x9.81x5)/1000
Convective Hydrodynamic Pressure
Convective hydrodynamic pressure on wall,
Cl 4.9.2(b) Pcw= Qcw(y) (Ah)c ρ g L
Qcw (y) = Coefficient of Convective Hydrodynamic Pressure on wall from Fig 11 (a)
corresponding to h/L = 0.088 at y = 0
Convective pressure at the base of wall
Pcw (y = 0) = 0.4x0.005x1050x9.81x57/1000
Qcw (y) = Coefficient of Convective Hydrodynamic Pressure from Fig 11 (b)

corresponding to h/L = 0.088 at y = h
Pcw (y = h) 0.417x0.005x1050x9.81x57/1000
Convective hydrodynamic pressure on the base slab
Cl 4.9.2(b) Pcb = Qcb (x) (Ah)c ρ g L

DOCUMENT NO.
DATE 23.05.2018
Qcb (x) = Coefficient of Convective Hydrodynamic Pressure on wall from Fig 11 (b)
corresponding to h/L = 0.088 at x = 0.5L
Convective pressure on top of base slab at x = 0.5L
Pcb = 0.361x0.005x1050x9.81x57/1000
Equivalent Linear Pressure Distribution
For stress analysis of tank wall, it is conveninet to have linear pressure
distribution along wall height. As per Section 4.9.4(GSDMA), equivalent
linear distribution for impulsive hydrodynamic pressure distribution
will be as follows:
�_𝑖= ((�_ℎ ) (0.12x876461x9.81/(2x29)/1000)

_𝑖�_𝑖 𝑔)/2�
�_𝑖= (�_𝑖
(4ℎ−6ℎ_𝑖))/ℎ^2
DOCUMENT NO.
DATE 23.05.2018
�_𝑖= (�_𝑖
(4ℎ−6ℎ_𝑖))/ℎ^2 17.79x(4x5-6x1.88)/(5^2)
�_𝑖= (�_𝑖 17.79x(6x1.88-2x5)/(5^2)

(6ℎ_𝑖−2ℎ))/ℎ^2
Total Impulsive Load =
Equivalent linear impulsive pressure distribution is shown below:

0.91
kN/m2
5.38 6.21
kN/m2 kN/m2
Ht from CG of load
Bottom from Bottom
4.13 1.84 0.39 1.20 0.47
2.75 3.30 0.91 4.73 4.32
1.38 4.75 1.40 10.26 14.39
0.00 6.21 1.88 17.80 33.46

�_𝑐= ((�_ℎ )_𝑐�_𝑐
𝑔)/2� (0.005x7063753x9.81/(2x29)/1000)

DOCUMENT NO.
DATE 23.05.2018
�_𝑐= (�_𝑐
(4ℎ−6ℎ_𝑐))/ℎ^2 5.97x(4x5-6x2.52)/(5^2)
�_𝑐= (�_𝑐 5.97x(6x2.52-2x5)/(5^2)

(6ℎ_𝑐−2ℎ))/ℎ^2
Total Convective Load =
Equivalent linear convective pressure distribution is shown below:
1.22
1.22 kN/m2
kN/m2
1.17 1.17
kN/m2 kN/m2
Ht from CG of load
Bottom from Bottom
4.13 1.21 0.44 1.06 0.47
2.75 1.20 1.13 2.72 3.07
1.38 1.18 1.82 4.36 7.94

DOCUMENT NO.
DATE 23.05.2018
0.00 1.17 2.52 5.98 15.04
SLOSHING WAVE HEIGHT
Cl 4.11 Maximum wave height,

dmax = (Ah)c R L /2 0.005x2.5x57/2
Hence, Sloshing height is less than Free board height of 0.5m
ANCHORAGE REQUIREMENT
h/ D =
Cl 4.12 1/(Ah)i = 1/0.12
Since h/D < 8.3, No anchorage is required

DOCUMENT NO.
DATE 23.05.2018
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
M-30
25 kN/m3
10.3 kN/m3
9.81 m/s2
1050 kg/m3
III
Rectangular
29.00 m
57.00 m
5.50 m
5.00 m
0.50 m
0.30 m
2.00 m
0.00 m
1920.00 m2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
11963.00 kN
1219470.00 kg
14400.00 kN
1467889.91 kg
0 kN
0 kg
85129.50 kN
8677828.75 kg
0.088
0.101
876461 kg
0.814
7063753 kg
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.375 m
1.88 m
0.503
2.52
4.811
24.06 m
13.500
67.50 m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
2093336.0 kg/m3
2.60 m
171.30 kN/m2
856.50 kN
2.74E+07 kN/m2
0.0104 m4
0.01761 m
0.27 sec
6.79
16.370 Sec
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.16
1.5
2.5
2.5
0.12
1.75
0.11
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.005
2467.33 kN
346.48 kN
2491.54 kN
97092.50 kN
2.57%
0.87
5.38 kN/m2
1.000
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
6.2 kN/m2
0.40
1.17 kN/m2
0.4165
1.22 kN/m2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.36
1.06 kN/m2
17.79 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
6.21 kN/m2
0.91 kN/m2
17.80 kN/m
1.88 m
33.46 kN-m/m
5.97 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
1.17 kN/m2
1.22 kN/m2
5.98 kN/m
2.52 m
15.04 kN-m/m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.36 m
0.088
8.3
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W1
& FOOTING
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
1
DOCUMENT NO.
DATE 23.05.2018
WALL W1 DESIGN OF CANTILEVER WALL
Grade of Concrete, fck = 30 N/mm2 Grade of Steel, fy = 500
Es = 2.00E+05 N/mm2
Clear Cover Water Face = 50 mm Soil Face = 30
Length of Wall = 29.00 m BOW = 242.400 BOF =
TOW = 248.300
Fill TOF HOF b/a Design Methodology
Fill 1 Liquid 248.300 5.50 5.27 Cantilever Wall

Fill 2 Earth 243.000 0.20 5.27 Cantilever Wall
Height of Wall From BOF (m) = 248.3-242.8

Height of Wall From BOW (m) = 248.3-242.4
Design Height of Wall, HOW =
Assumed thickness at various Heights
Height from bottom 0.00 3.60 5.50 Taper = One Side
Provided thickness 750 200 200
DESIGN FOR VERTICAL MOMENTS
Cantilever Wall : Moment at Bottom of Wall = k * r * HOF^2 * HOW / 6

= Coefficient * Multiplier
k = Coefficient of Lateral Pressure due to Fill r = Unit weight of Fill

HOF = Height of Fill HOW = Height of Wall
Coefficient at Bottom of wall = 0.1667 Multiplier = k * r * HOF^2 * HOW

Coefficient at 0.25*HOW from Bottom = 0.0703

DOCUMENT NO.
DATE 23.05.2018
CASE 1: FILL 1 ACTING ; FILL 2 NOT ACTING Fill 1 =

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m
k = Coefficient of Lateral Pressure due to Fill = 1.00
Multiplier = k * r * HOF^2 * HOW = 1x10.3x5.5^2x5.5
Ht from Coefficients Multiplier Moment Moment

bottom Fill 1 Fill 2
of wall
(m)
5.50
5.50 0.0000 1713.7 0.00 0.00
4.13 -0.0026 1713.7 -4.46 0.00
2.75 -0.0208 1713.7 -35.64 0.00
1.38 -0.0703 1713.7 -120.47 0.00
0.00 -0.1667 1713.7 -285.67 0.00
Negative moments implies that tension face is Fill 1

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.50 m
Multiplier = k * r * HOF^2 * HOW = 0.33x18x0.2^2x5.5

of wall
(m)
5.50
5.50 0.0000 1.3 0.00 0.00
4.13 -0.0026 1.3 0.00 0.00
2.75 -0.0208 1.3 0.00 -0.03
1.38 -0.0703 1.3 0.00 -0.09
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 1.3 0.00 -0.22
ENVELOPE VERTICAL MOMENTS ON FILL 1 & FILL 2 FACE
Ht from Moment Moment Add EQ Addl EQ Total Total

bottom Fill 1 Fill 2 moment - moment - Moment Moment
of wall Impulsive Convectiv Fill 1 Fill 2
(m) e
5.50
5.50 0 0 0 0
4.13 4.46 0 0.47 0.46 5.39017 0
2.75 35.64 0.03 4.32 3.02 42.9832 0.03
1.38 120.47 0.09 14.41 7.75 142.626 0.09
0.00 285.67 0.22 33.50 14.54 333.712 0.22
CALCULATING REQUIRED VERTICAL REINFORCEMENT
Mu = M * 1.5 c' = 50+0.5x16 = 58 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
Fill 1 reinforcement
Height Moment Moment Provided d = D - c' Ast for Min Reinf Reinf
from unfactor Mu Factor Th D Mu required
bottom M
m kN-m/m kN-m/m mm mm mm2 mm2 mm2

5.500 200 350 350
5.500 0.00 0.00 200 142 0 350 350
4.125 5.39 8.09 200 142 133 350 350
2.750 42.98 64.47 330 272 565 578 578
1.375 142.63 213.94 540 482 1060 875 1060
DOCUMENT NO.
DATE 23.05.2018
0.000 333.71 500.57 750 692 1736 875 1736
bottom M

5.500 200 350 350
5.500 0.00 0.00 200 165 0 350 350
4.125 0.00 0.00 200 165 0 350 350
2.750 0.03 0.05 330 295 0 578 578
1.375 0.09 0.14 540 505 1 875 875
0.000 0.22 0.33 750 715 1 875 875
DESIGN FOR HORIZONTAL MOMENTS

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m
Ht from Coefficients Multiplier Moment Mid Point Moment Edge

bottom
of wall Mid Point Edge FILL 1 FILL 2 FILL 1 FILL 2
(m)
5.50
5.50 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1713.7 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.50 m

bottom
(m)
5.50
5.50 0.000 0.000 1.3 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1.3 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1.3 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1.3 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1.3 0.00 0.00 0.00 0.00
ENVELOPE HORIZONTAL MOMENTS ON FILL 1 & FILL 2 FACE
Ht from FILL 1 FILL 2

bottom
of wall
Mid Point Edge Mid Point Edge
(m)
5.50
5.50 0.00 0.00 0.00 0.00
4.13 0.00 0.00 0.00 0.00
2.75 0.00 0.00 0.00 0.00
1.38 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
CALCULATING REQUIRED HORIZONTAL REINFORCEMENT
Mu = M * 1.5 c' = 50+10+0.5x10 = 65 mm

DOCUMENT NO.
DATE 23.05.2018
Fill 1 Reinforcement at Mid Point
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 135 0 350 350
4.13 0.00 0.00 200 135 0 350 350
2.75 0.00 0.00 330 265 0 578 578
1.38 0.00 0.00 540 475 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 50+10+0.5x10 = 65 mm
Fill 1 Reinforcement at Edge
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 135 0 350 350
4.13 0.00 0.00 200 135 0 350 350
2.75 0.00 0.00 330 265 0 578 578
1.38 0.00 0.00 540 475 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 30+10+0.5x10 = 45 mm
Fill 2 reinforcement at Mid Point
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 155 0 350 350
DOCUMENT NO.
DATE 23.05.2018
4.13 0.00 0.00 200 155 0 350 350
2.75 0.00 0.00 330 285 0 578 578
1.38 0.00 0.00 540 495 0 875 875
0.00 0.00 0.00 750 705 0 875 875
c' = 30+10+0.5x10 = 45 mm
Fill 2 reinforcement at Edge
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 155 0 350 350
4.13 0.00 0.00 200 155 0 350 350
2.75 0.00 0.00 330 285 0 578 578
1.38 0.00 0.00 540 495 0 875 875
0.00 0.00 0.00 750 705 0 875 875
SUMMARY OF HORIZONTAL & VERTICAL REINFORCEMENT - REQUIRED & PROVIDED
Height Required Provided Reinforcement Provided Reinf

from Reinforcement
bottom
FILL 1 FILL 2 FILL 1 FILL 2 Fill 1
5.50 350 350 00-000+12-160 00-000+10-160 707

5.50 350 350 00-000+12-160 00-000+10-160 707
4.13 350 350 00-000+12-160 00-000+10-160 707
2.75 578 578 10-160+12-160 10-160+10-160 1198
1.38 1060 875 10-160+12-160 10-160+10-160 1198
0.00 1736 875 16-160+12-160 10-160+10-160 1964
1.20 3.60 3.60
Curtail at
Fill 1 / Fill 2
DOCUMENT NO.
DATE 23.05.2018
Curtail at
Fill 1 / Fill 2 1.60 4.00 4.00
Ht from REQUIRED HORIZONTAL REINFORCEMENT

bottom
of wall EDGE MID POINT
FILL 1 FILL 2 FILL 1 FILL 2

5.50 350 350 350 350
5.50 350 350 350 350
4.13 350 350 350 350
2.75 578 578 578 578
1.38 875 875 875 875
0.00 875 875 875 875
Ht from PROVIDED HORIZONTAL REINFORCEMENT

bottom
5.50 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140

5.50 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
4.13 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
2.75 00-000+10-120 00-000+10-120 00-000+10-120 00-000+10-120
1.38 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
0.00 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
1.40 3.60 1.40 3.60
Break at
Fill 1 / Fill 2 1.80 4.00 1.40 4.00

bottom
5.50 561 561 561 561

5.50 561 561 561 561
4.13 561 561 561 561
DOCUMENT NO.
DATE 23.05.2018
2.75 655 655 655 655
1.38 982 982 982 982
0.00 982 982 982 982
WALL DATA FOR DESIGN OF FOUNDATION
Part Thickness Height Area G1 G2
Bottom Top
4 0.20 0.00 0.00 0.000 0.000 0.000
3 0.20 0.20 1.90 0.380 0.100 0.100
2 0.75 0.20 3.60 1.710 0.264 0.486
1 0.75 0.75 0.40 0.300 0.375 0.375
Total = 2.390 0.252 0.498
Weight of wall per RM = 59.8 kN/m
Case Overturning Moment Sliding Force
Case 1 285.67 155.79

Case 2 0.22
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.3-242.8 5.50 m
248.3-242.4 5.90 m
5.50 m
One Side
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
Earth
0.33x18x0.2^2x5.5 1.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Earth
0.33x18x0.2^2x5.5 1.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
491
491
491
982
982
982
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
NT
POINT
FILL 2
350
350
350
578
875
875
NT
POINT
FILL 2
00-000+10-140
00-000+10-140
00-000+10-140
00-000+10-120
00-000+10-080
00-000+10-080
NT
POINT
FILL 2
561
561
561
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
655
982
982
DOCUMENT NO.
DATE 23.05.2018
WALL W1 CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
Limiting crack width, w
Modulus Elasticity of Concrete Ec = 5000 x SQRT( fck )
Modulus Elasticity of Steel, Es
Applied Moment at service condition, M
σcbc = 10 N/mm2 Modular Ratio, m, 280/(3*σcbc) =
Breadth, b (mm) = 1000 Depth, h (mm) = 750
Reinf, Ast mm2 = 16-160+12-160 1963 Clear Cover, CC mm = 50
Reinf, Asc mm2 = 10-160+10-160 988 Clear Cover, CC mm = 30
Effecive Depth, d = 750-50-0.5x16
Cover to the centre of compression steel, d' = 30+0.5x10
Max spacing of bars, S =
acr = maximum spacing of tensile bar from outer edge of concrete (mm)
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
Depth of NA from Compression face = x
Solve equation = (bx2/2) + (1.5m-1) Asc (x - d') - m Ast (d-x) = 0 to get x. x=
(x - d ') bxf c x
Asc fsc = (1.5m -1) Asc f c (d - ) + A sc f sc (d - d ') = M
x 2 3
fc (d - x)
Ast fst = (m -1) Ast Solve these equations to get fc
x
Stress in extreme compression fibre, fc
Stress in Tension reinforcement, fst = 9.33x6.74x(692-133.8)/133.8
Distance from compression face to point where crack width is being calculated, a
Strain at the level considered, ε1 = (h - x)fs/Es(d - x)
Strain due to stiffening effect in concrete, ε2 = b(h - x)(a - x)/(3EsAs(d - x))
εm = Average surface strain = ε1 - ε2
Crack Width, w = 3 acr εm/(1+2(acr - Cmin)/(h - x))

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
333.71 kN-m
9.33
692 mm
35 mm
80 mm
62.5 mm
133.8 mm
d - d ') = M
6.74 N/mm2
262.3 N/mm2
750 mm
1.45E-03
5.78E-04
8.70E-04
0.157 mm
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x
Strain due to stiffening effect in concrete, ε2 = 1.5b(h - x)(a - x)/(3EsAs(d - x))

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.1 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
154.10 kN-m
9.33
642 mm
53 mm
180 mm
99.1 mm
99.73 mm
d - d ') = M
4.48 N/mm2
227.5 N/mm2
700 mm
1.26E-03
1.49E-03
-2.28E-04
-0.058 mm
DOCUMENT NO.
PROJECT 20 MLD SEWAGE TREATMENT PLANT BASED ON
SBR TECHNOLOGY AT KARNAL TATA-KARNAL20-SBR-DC-02
DATE 23.05.2018
FTG W1 DESIGN OF FOOTING

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.400 BOF =
Fill HOF r Case Overturning moment

m kN/m3 kN-m/m
Fill 1 Liquid 5.50 10.3 Case 1 285.67

Fill 2 Earth 0.20 18.0 Case 2 0.22
Weight of wall per RM (kN/m) = 59.80 Length LW (m) =

Distances of CG of wall from edges (m)
G1 = 0.252 G2 = 0.498
DIMENSIONING AND CALCULATIONS

Th1F1 = Thicness of footing Fill 1 near wall Liquid Earth
Th2F1 = Thicness of footing Fill 1 near edge
Th1F2 = Thicness of footing Fill 2 near wall

L1 = Length of footing Fill 1 side

L1 Th1F1 Th2F1 L2 Th1F2 Th2F2

m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
1.85 500 200 2.00 500 200
Additional Earth Fill Fill 1 Side 0.40 Fill 2 Side 0.60

Total length of base (m), LB = L1 + L2 + G1 + G2 = 1.85+2+0.252+0.498
Weight of footing on Fill 1 side ,WF1 (kN/m) = (0.5x(500+200)x1.85x25/1000)

CG of footing on Fill 1 side from P, GF1 =
.85-(1.85x1000x(2x200+500)/((3x(200+500)))/1000)
Weight of footing on Fill 2 side ,WF2 (kN/m) = (0.5x(500+200)x2x25/1000)
CG of footing on Fill 2 side from S, GF2 =
2-(2x1000x(2x200+500)/((3x(200+500)))/1000)
Weight of Fill 1 on Footing, kN/m = 5.5x10.3x1.85+0.4x18x1.85

CG of Weight of Fill 1 from P = 0.5x1.85
Weight of Fill 2 on Footing, kN/m = 0.2x18x2+0.6x18x2
CG of Weight of Fill 2 from S = 0.5x2
Length of Central Portion of footing ,LCF = 0.252+0.498
Weight of Central Portion of footing ,WCF(kN/m) = 0.5x(500+500)x0.75x25/1000
Gross SBC = 84.6+(243-242.4+500/1000)x18
CASE 1 FILL 1 ACTING ; FILL 2 NOT ACTING
Clock-wise moments are +ve

Description Load /m Distance Moment Explanation of
along from S Formula for Distance
length from S
V d V*d
kN/m m kN-m/m
Horizontal pressure Fill 1 285.67

Horizontal pressure Fill 2 - - -
DOCUMENT NO.
DATE 23.05.2018
Weight of Fill 1 on footing 118.12 3.68 -434.09 4.6-0.925
Weight of Fill 2 on footing - - -
Self weight of footing on Fill 1 side 16.19 3.54 -57.35 4.6-1.057
Self weight of footing on Fill 2 side 17.50 1.143 -20.00 1.143
Self weight of central portion of footing 9.38 2.38 -22.27 0.5x0.75+2
Self weight of wall 59.80 2.50 -149.39 2+0.498
Total overturning moments (Adding +ve moments) kN-m/m =
Total resisting moments (Adding -ve moments) kN-m/m =
Check for overturning = Resisting/ overturning moments = 683.099/285.67
Total vertical load P (kN/m) = (118.12-16.188+17.5+9.375+59.8)
Net moment (kN-m/m) = ABS((285.67+434.091+57.352-20.003-22.266-

149.387))
Distance resultant from respective point, S (m) = 397.43/220.98
Eccentricity = 0.5x4.6-1.8
Base Pressure at P, kN/m2 = (220.98/4.6)x(1-(6x0.5/4.6))
Base Pressure at Q (interpolated) = 16.71+((79.37-16.71)/4.6)x1.85
Base Pressure at R (interpolated) = 16.71+((79.37-16.71)/4.6)x(1.85+0.75)
Base Pressure at S, kN/m2 = (220.98/4.6)x(1+(6x0.5/4.6))
Total base pressure P-Q, kN = 0.5x(16.71+41.91)x1.85
CG of base pressure P-Q from Q = (1.85x(2x16.71+41.91))/(3x(16.71+41.91))

Moment at Q (base), kN-m/m = 54.224x0.792-16.188x(1.85-1.057)-118.12x0.5x1.85
Total base pressure R-S, kN = 0.5x(52.13+79.37)x2

CG of base pressure R-S from R = (2x(2x79.37+52.13))/(3x(52.13+79.37))
Moment at R (base), kN-m/m = 131.5x1.069-17.5x(2-1.143)
DOCUMENT NO.
DATE 23.05.2018

Description Load /m Distance Moment Formula for Distance
along from P from P
length
V d V*d
kN/m m kN-m/m
Horizontal pressure Fill 2 -0.22
Weight of Fill 2 on footing 28.80 3.6 103.68 4.6-1
Self weight of footing on Fill 1 side 16.19 1.1 17.11 1.057
Self weight of footing on Fill 2 side 17.50 3.457 60.50 4.6-1.143
Self weight of central portion of footing 9.38 2.23 20.86 0.5x0.75+1.85
Self weight of wall 59.80 2.10 125.69 1.85+0.252
Total overturning moments (Adding -ve moments) kN-m/m =

Total resisting moments (Adding +ve moments) kN-m/m =
Total vertical load P (kN/m) = (28.8+16.188+17.5+9.375+59.8)
Net moment (kN-m/m) = ABS((-0.22-103.68+17.11+60.498+20.859+125.693))
Distance resultant from respective point, P (m) = 327.62/131.66
Distance resultant from S (m) = 4.6-2.488
Base Pressure at P = (131.66/4.6)x(1-(6x0.188/4.6))
DOCUMENT NO.
DATE 23.05.2018
Base Pressure at S = (131.66/4.6)x(1+(6x0.188/4.6))
Moment at Q (base), kN-m/m = 45.17x0.89-16.188x(1.85-1.057)
Moment at R (base), kN-m/m = 65.19x1.031-17.5x(2-1.143)-28.8x0.5x2
CASE 3 BOTH FILL 1 & FILL 2 ACTING

along from S from S
length
V d V*d
kN/m m kN-m/m
Horizontal pressure Fill 1 - - 285.67

Weight of Fill 2 on footing 28.80 1.00 -28.80 0.5x2

DOCUMENT NO.
DATE 23.05.2018
Check for overturning = Resisting/ overturning moments =
Total vertical load P (kN/m) = (-118.12+28.8+16.188+17.5+9.375+59.8)
Net moment (kN-m/m) = ABS((285.67-0.22-434.091-28.8-57.352-20.003-
22.266-149.387))
Distance resultant from S (m) = 1.71
Base Pressure at Q = 12.51+18.17x1.85
Base Pressure at R = 12.51+18.17x(1.85+0.75)
Total base pressure P-Q = 0.5x(12.51+46.12)x1.85

Moment at Q (base) = 54.23x0.75-16.188x(1.85-1.057)-118.12x0.5x1.85
Total base pressure R-S = 0.5x(59.75+96.09)x2

Moment at R (base) = 155.84x1.08-17.5x(2-1.143)-28.8x0.5x2
MOMENT ENVELOPE
Description Case 1 Case 2 Case 3
Moment at Q (base) = -79.13 27.36 -81.43
Moment at R (base) = 125.58 23.43 124.51
Envelope unfactored moments at Q Top 81.43

kN-m/m
Bottom 27.36
DOCUMENT NO.
DATE 23.05.2018
Envelope unfactored moments at R Top 23.43
kN-m/m
Bottom 125.58
CALCULATING REQUIRED REINFORCEMENT FOR LIMIT STATE OF STRENGTH

Reinforcement is calculated for factored moments ; Load Factor = 1.5
M u = M * 1.5 Mu = Factored moments
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
Min reinforcement is calculated as per the provisions of IS 3370 (Part 2) - 2009
Percentage of min reinforcement % = 0.35
Location Moment Moment Provided d = D - c' Ast for Min Reinf Reinf
unfactor Mu Factor Th D Mu required
M
kN-m/m kN-m/m mm mm mm2 mm2 mm2
Q - Top 81.43 122.15 500 444 649 875 875

Q - Bot 27.36 41.05 500 442 215 875 875
R - Top 23.43 35.14 500 444 183 875 875
R - Bot 125.58 188.37 500 442 1019 875 1019
Reinf
Location Reinforcement Provided
required
Q - Top 875 00-000+12-120 942
Q - Bot 875 00-000+16-140 1436
R - Top 875 00-000+12-120 942
R - Bot 1019 00-000+16-140 1436
DISTRIBUTION REINFORCEMENT
Fill 1 Side, Average th from 0 to 0.925 m (500+0.5x(500+200))/2
Required Reinforcment = 0.35x1000xMIN(0.5x425,250)/100

DOCUMENT NO.
DATE 23.05.2018
Provided Reinforcment = 00-000+12-140
Fill 1 Side, Average th from 0.925 m to 1.85 m (200+0.5x(500+200))/2
Fill 2 Side, Average th from 0 to 1 m (500+0.5x(500+200))/2
Fill 2 Side, Average th from 1 m to 2 m (200+0.5x(500+200))/2
CHECK FOR SLIDING
Sliding Force (kN/m) =

Self-weight of Wall (kN/m) =
Self-weight of Footing (kN/m) =
Weight of Fill 1 on Footing (kN/m) =
Total Weight (kN/m) = 59.8+43.063+118.12
Coefficient of friction between concrete and earth =

Resisting Force (kN/m) =
Balance direct tensile force to be resisted by Nominal Slab (kN/m) =
Check for the crack width attached along with

DOCUMENT NO.
DATE 23.05.2018
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
285.67
0.22
29.00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
1.85+2+0.252+0.498 4.60
200)x1.85x25/1000) 16.19
3x(200+500)))/1000) 1.057
00+200)x2x25/1000) 17.50
3x(200+500)))/1000) 1.143
3x1.85+0.4x18x1.85 118.12
0.5x1.85 0.93
0.2x18x2+0.6x18x2 28.80
0.5x2 1.00
0.252+0.498 0.75 m
+500)x0.75x25/1000 9.38
242.4+500/1000)x18 104.4
moments are +ve

Explanation of
Formula for Distance
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
4.6-0.925
4.6-1.057
1.143
0.5x0.75+2
2+0.498
285.67
683.10
683.099/285.67 2.39
8+17.5+9.375+59.8) 220.98
352-20.003-22.266- 397.43
149.387))
397.43/220.98 1.800
0.5x4.6-1.8 0.50
/4.6)x(1-(6x0.5/4.6)) 16.71
37-16.71)/4.6)x1.85 41.91
71)/4.6)x(1.85+0.75) 52.13
4.6)x(1+(6x0.5/4.6)) 79.37
x(16.71+41.91)x1.85 54.22
))/(3x(16.71+41.91)) 0.79
57)-118.12x0.5x1.85 -79.13
0.5x(52.13+79.37)x2 131.50
))/(3x(52.13+79.37)) 1.07
.069-17.5x(2-1.143) 125.58
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
4.6-1
1.057
4.6-1.143
0.5x0.75+1.85
1.85+0.252
0.22
327.84
327.84/0.22 ###
8+17.5+9.375+59.8) 131.66
8+20.859+125.693)) 327.62
327.62/131.66 2.49
4.6-2.488 2.11
0.5x4.6-2.112 0.19
6)x(1-(6x0.188/4.6)) 21.59
65-21.59)/4.6)x1.85 27.24
59)/4.6)x(1.85+0.75) 29.54
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
6)x(1+(6x0.188/4.6)) 35.65
x(21.59+27.24)x1.85 45.17
))/(3x(21.59+27.24)) 0.89
16.188x(1.85-1.057) 27.36
0.5x(29.54+35.65)x2 65.19
))/(3x(29.54+35.65)) 1.03
2-1.143)-28.8x0.5x2 23.43
moments are +ve

from S
4.6-0.925
0.5x2
4.6-1.057
1.143
0.5x0.75+2
2+0.498
285.67
712.12
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
2.49
8+17.5+9.375+59.8) 249.78
28.8-57.352-20.003- 426.45
22.266-149.387))
426.449/249.78 1.71
1.71 1.71
0.5x4.6-1.71 0.59
4.6)x(1-(6x0.59/4.6)) 12.51
12.51+18.17x1.85 46.12
1+18.17x(1.85+0.75) 59.75
.6)x(1+(6x0.59/4.6)) 96.09
x(12.51+46.12)x1.85 54.23
))/(3x(12.51+46.12)) 0.75
57)-118.12x0.5x1.85 -81.43
0.5x(59.75+96.09)x2 155.84
))/(3x(59.75+96.09)) 1.08
2-1.143)-28.8x0.5x2 124.51
Case 3
-81.43
124.51
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
TRENGTH
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
155.79
59.80
43.06
118.12
59.8+43.063+118.12 220.98
0.45
99.44
56.35
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
FTG W1 CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
R-Bottom Limiting crack width, w
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x
Stress in Tension reinforcement, fst = 9.33x5.84x(442-90)/90

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
125.58 kN-m
9.33
442 mm
36 mm
140 mm
82.9 mm
90.0 mm
d - d ') = M
5.84 N/mm2
213.1 N/mm2
500 mm
1.24E-03
5.54E-04
6.87E-04
0.150 mm
DOCUMENT NO.
DATE 23.05.2018
Q-Top Limiting crack width, w
= SQRT((0.5x120)^2+(50+0.5x12)^2)-0.5x12
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
81.43 kN-m
9.33
444 mm
38 mm
120 mm
76.1 mm
72.4 mm
d - d ') = M
4.33 N/mm2
207.4 N/mm2
500 mm
1.19E-03
8.71E-04
3.22E-04
0.070 mm
DOCUMENT NO.
DATE 23.05.2018
FTG W1 CALCULATION OF CRACK WIDTH - FLEXURE & TENSION (IS 3370 Part 2 - 2009, Annexure
Junction Limiting crack width, w
with Base Characteristic cube strength of Concrete, fck
Applied Tension at service condition, N
Distance between centroid of Ast and Asc, Zs = 200-50-0.5x10-50-0.5x10
Distance - Centroid of Ast to CG of Ast & Asc, Xs
= 359x90/(359+359)
Modified Moment M' = M - N * Xs
Modified moment, M' < 0, section in tension

DOCUMENT NO.
DATE 23.05.2018
Tension excess tensile face, T'
= (56.345x359/(359+359))
Tension less tensile face, T''
= (56.345x359/(359+359))
Stress in Tension reinforcement, fst = 28.173x1000/359
Total Concrete Area, Ac = 1000x200+(9.33-1)x(359+359)
Direct Tension in Concrete, fct = 56.345x1000/205980.9
Distance from comp face to point where crack width is being calculated, a
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x220)^2+(50+0.5x10)^2)-0.5x10
Strain at the level considered, ε1 = fs / Es
Strain due to stiffening effect in concrete, ε2 = 2bD/3EsAs
Crack Width, w = 3 acr εm

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
Part 2 - 2009, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
0.0 kN-m
56.35 kN-m
9.33
90.0 mm
45.0 mm
-2.5 kN-m
OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
145 mm
55 mm
28.2 kN
28.2 kN
78.5 N/mm2
2.1E+05 mm2
0.27 N/mm2
200 mm
OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
220 mm
118.0 mm
3.92E-04
9.29E-04
-5.36E-04
-0.190 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W1A AND

DECANTER WALL FOOTING
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
AND
TING
DOCUMENT NO.
DATE 23.05.2018
WALL W1A DESIGN OF CANTILEVER WALL
Es = 2.00E+05 N/mm2
TOW = 248.600






DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 5.80 m HOW = 5.80 m

of wall
(m)
5.80
5.80 0.0000 2009.7 0.00 0.00
4.35 -0.0026 2009.7 -5.23 0.00
2.90 -0.0208 2009.7 -41.80 0.00
1.45 -0.0703 2009.7 -141.28 0.00
0.00 -0.1667 2009.7 -335.02 0.00

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.80 m

of wall
(m)
5.80
5.80 0.0000 1.4 0.00 0.00
4.35 -0.0026 1.4 0.00 0.00
2.90 -0.0208 1.4 0.00 -0.03
1.45 -0.0703 1.4 0.00 -0.10
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 1.4 0.00 -0.23

(m) e
5.80
5.80 0 0 0 0
4.35 5.23 0 0.47 0.46 6.16017 0
2.90 41.8 0.03 4.32 3.02 49.1432 0.03
1.45 141.28 0.1 14.41 7.75 163.436 0.1
0.00 335.02 0.23 33.50 14.54 383.062 0.23
Mu = M * 1.5 c' = 50+0.5x16 = 58 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

5.800 500 875 875
5.800 0.00 0.00 500 442 0 875 875
4.350 6.16 9.24 500 442 48 875 875
2.900 49.14 73.71 549 491 349 875 875
1.450 163.44 245.15 649 591 981 875 981
DOCUMENT NO.
DATE 23.05.2018
0.000 383.06 574.59 750 692 2007 875 2007
bottom M

5.800 500 875 875
5.800 0.00 0.00 500 462 0 875 875
4.350 0.00 0.00 500 462 0 875 875
2.900 0.03 0.05 549 511 0 875 875
1.450 0.10 0.15 649 611 1 875 875
0.000 0.23 0.35 750 712 1 875 875

ρ = 10.3 kN/m3 HOF = 5.80 m HOW = 5.80 m

bottom
(m)
5.80
5.80 0.000 0.000 2009.7 0.00 0.00 0.00 0.00
4.35 0.000 0.000 2009.7 0.00 0.00 0.00 0.00
2.90 0.000 0.000 2009.7 0.00 0.00 0.00 0.00
1.45 0.000 0.000 2009.7 0.00 0.00 0.00 0.00
0.00 0.000 0.000 2009.7 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.80 m

bottom
(m)
5.80
5.80 0.000 0.000 1.4 0.00 0.00 0.00 0.00
4.35 0.000 0.000 1.4 0.00 0.00 0.00 0.00
2.90 0.000 0.000 1.4 0.00 0.00 0.00 0.00
1.45 0.000 0.000 1.4 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1.4 0.00 0.00 0.00 0.00

bottom
of wall
(m)
5.80
5.80 0.00 0.00 0.00 0.00
4.35 0.00 0.00 0.00 0.00
2.90 0.00 0.00 0.00 0.00
1.45 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+16+0.5x10 = 71 mm

DOCUMENT NO.
DATE 23.05.2018
bottom M
5.80 500 875 875
5.80 0.00 0.00 500 429 0 875 875
4.35 0.00 0.00 500 429 0 875 875
2.90 0.00 0.00 549 478 0 875 875
1.45 0.00 0.00 649 578 0 875 875
0.00 0.00 0.00 750 679 0 875 875
c' = 50+16+0.5x10 = 71 mm
bottom M
5.80 500 875 875
5.80 0.00 0.00 500 429 0 875 875
4.35 0.00 0.00 500 429 0 875 875
2.90 0.00 0.00 549 478 0 875 875
1.45 0.00 0.00 649 578 0 875 875
0.00 0.00 0.00 750 679 0 875 875
c' = 30+16+0.5x10 = 51 mm
bottom M

5.80 500 875 875
5.80 0.00 0.00 500 449 0 875 875
DOCUMENT NO.
DATE 23.05.2018
4.35 0.00 0.00 500 449 0 875 875
2.90 0.00 0.00 549 498 0 875 875
1.45 0.00 0.00 649 598 0 875 875
0.00 0.00 0.00 750 699 0 875 875
c' = 30+16+0.5x10 = 51 mm
bottom M

5.80 500 875 875
5.80 0.00 0.00 500 449 0 875 875
4.35 0.00 0.00 500 449 0 875 875
2.90 0.00 0.00 549 498 0 875 875
1.45 0.00 0.00 649 598 0 875 875
0.00 0.00 0.00 750 699 0 875 875

from Reinforcement
bottom
5.80 875 875 00-000+16-160 00-000+16-160 1257

5.80 875 875 00-000+16-160 00-000+16-160 1257
4.35 875 875 00-000+16-160 00-000+16-160 1257
2.90 875 875 00-000+16-160 00-000+16-160 1257
1.45 981 875 00-000+16-160 00-000+16-160 1257
0.00 2007 875 16-160+16-160 16-160+16-160 2513
1.20 1.20
Curtail at
Fill 1 / Fill 2
DOCUMENT NO.
DATE 23.05.2018
Curtail at
Fill 1 / Fill 2 1.50 1.50

bottom

5.80 875 875 875 875
5.80 875 875 875 875
4.35 875 875 875 875
2.90 875 875 875 875
1.45 875 875 875 875
0.00 875 875 875 875

bottom
5.80 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080

5.80 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
4.35 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
2.90 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
1.45 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
0.00 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
Break at
Fill 1 / Fill 2

bottom
5.80 982 982 982 982

5.80 982 982 982 982
4.35 982 982 982 982
DOCUMENT NO.
DATE 23.05.2018
2.90 982 982 982 982
1.45 982 982 982 982
0.00 982 982 982 982
Bottom Top
4 0.50 0.00 0.00 0.000 0.000 0.000
3 0.50 0.50 2.20 1.100 0.250 0.250
2 0.75 0.50 3.60 2.250 0.317 0.433
1 0.75 0.75 0.30 0.225 0.375 0.375
Total = 3.575 0.300 0.450
Case 1 335.02
Case 2 0.23
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.6-242.8 5.80 m
248.6-242.5 6.10 m
5.80 m
One Side
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.8^2x5.8 2009.7
Earth
0.33x18x0.2^2x5.8 1.4
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.8^2x5.8 2009.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Earth
0.33x18x0.2^2x5.8 1.4
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
1257
1257
1257
1257
1257
2513
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
NT
POINT
FILL 2
875
875
875
875
875
875
NT
POINT
FILL 2
00-000+10-080
00-000+10-080
00-000+10-080
00-000+10-080
00-000+10-080
00-000+10-080
NT
POINT
FILL 2
982
982
982
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
982
982
982
DOCUMENT NO.
DATE 23.05.2018
WALL W1A CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
383.06 kN-m
9.33
692 mm
38 mm
80 mm
62.5 mm
139.0 mm
d - d ') = M
6.34 N/mm2
235.3 N/mm2
750 mm
1.30E-03
4.48E-04
8.52E-04
0.154 mm
DOCUMENT NO.
DATE 23.05.2018
1 ACTUATOR LOADS FOR CASE 1
2 ACTUATOR LOADS FOR CASE 2

DOCUMENT NO.
DATE 23.05.2018
SCREEN SHOTS OF REACTIONS FROM STAAD MODEL
1 Reactions of Case 1
2 Reactions of Case 2
These reaction are applied in the footing design sheet of respective load case.
DOCUMENT NO.
DATE 23.05.2018
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
D-FTG-M DESIGN OF FOOTING
CASE 1 Grade of Concrete, fck = 30 N/mm2 Grade of Steel, fy = 500

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.500 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 5.80 10.3 Case 1 335.02

Fill 2 Earth 0.20 18.0 Case 2 0.23

G1 = 0.300 G2 = 0.450




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
3.00 600 600 2.20 600 600
Total length of base (m), LB = L1 + L2 + G1 + G2 = 3+2.2+0.3+0.45

3-(3x1000x(2x600+600)/((3x(600+600)))/1000)
2.2-(2.2x1000x(2x600+600)/((3x(600+600)))/1000)
Weight of Fill 1 on Footing, kN/m = 5.8x10.3x3

CG of Weight of Fill 1 from P = 0.5x3
Weight of Fill 2 on Footing, kN/m = 0.2x18x2.2
CG of Weight of Fill 2 from S = 0.5x2.2
Gross SBC = 84.6+(243-242.5+600/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018
Self weight of central portion of footing 11.25 2.58 -28.97 0.5x0.75+2.2
Self weight of wall 89.40 2.65 -236.93 2.2+0.45
Addl vertical load on Fill 1 side, Load 1 -30.00 3.75 112.50 -240x1/8,
0.8+0.3+0.45+2.2
Addl moment on Fill 1 side, Load 3 0.00 0.00 12.81 50x1x(1.6+0.5x0.3

+0.3)/8
Reaction Node - Wall - Vertical (STAAD) -48.22 2.65 127.78 -385.738/8
Reaction Node - Col - Vertical (STAAD) 38.45 1.10 -42.30 307.606/8, 2.2-1.1
Reaction Node - Wall - Moment (STAAD) 0.00 0.00 9.36 74.858/8
Reaction Node - Col - Moment (STAAD) 0.00 0.00 17.08 136.644/8
Total vertical load P (kN/m) = (179.22-45+33+11.25+89.4-30-48.217+38.451)

236.926+112.5+12.813+127.784-
42.296+9.357+17.081))
Base Pressure at Q (interpolated) = 16.26+((90.66-16.26)/5.95)x3
Base Pressure at R (interpolated) = 16.26+((90.66-16.26)/5.95)x(3+0.75)
Total base pressure P-Q, kN = 0.5x(16.26+53.77)x3

DOCUMENT NO.
DATE 23.05.2018
CG of base pressure P-Q from Q = (3x(2x16.26+53.77))/(3x(16.26+53.77))
Moment at Q (base), kN-m/m = 105.045x1.232-45x(3-1.5)-179.22x0.5x3
Total base pressure R-S, kN = 0.5x(63.15+90.66)x2.2

CG of base pressure R-S from R = (2.2x(2x90.66+63.15))/(3x(63.15+90.66))
Moment at R (base), kN-m/m = 169.191x1.166-33x(2.2-1.1)

along from P from P
length
V d V*d
kN/m m kN-m/m
Weight of Fill 2 on footing 7.92 4.9 38.41 5.95-1.1
Self weight of central portion of footing 11.25 3.38 37.97 0.5x0.75+3
Self weight of wall 89.40 3.30 295.00 3+0.3
Total vertical load P (kN/m) = (+7.92+45+33+11.25+89.4)
Net moment (kN-m/m) = ABS((+0.23-

38.412+67.5+160.05+37.969+295.004))

DOCUMENT NO.
DATE 23.05.2018
Moment at Q (base), kN-m/m = 83.07x1.43-45x(3-1.5)
Moment at R (base), kN-m/m = 79.255x1.128-33x(2.2-1.1)-7.92x0.5x2.2

along from S from S
length
V d V*d
kN/m m kN-m/m

Weight of Fill 2 on footing 7.92 1.10 -8.71 0.5x2.2

DOCUMENT NO.
DATE 23.05.2018
Addl vertical load on Fill 1 side, Load 1 -30.00 3.75 112.50
Addl moment on Fill 1 side, Load 3 0.00 0.00 12.81
Reaction Node - Wall - Vertical (STAAD) -48.22 2.65 127.78
Reaction Node - Col - Vertical (STAAD) 38.45 1.10 -42.30
Reaction Node - Wall - Moment (STAAD) 0.00 0.00 9.36
Reaction Node - Col - Moment (STAAD) 0.00 0.00 17.08
DOCUMENT NO.
DATE 23.05.2018
Total vertical load P (kN/m) = (-179.22+7.92+45+33+11.25+89.4-30-

48.217+38.451)
28.969-236.926+112.5+12.813+127.784-
42.296+9.357+17.081))
Base Pressure at Q = 15.01+13.373x3
Base Pressure at R = 15.01+13.373x(3+0.75)
Total base pressure P-Q = 0.5x(15.01+55.13)x3

Moment at Q (base) = 105.21x1.21-45x(3-1.5)-179.22x0.5x3
Total base pressure R-S = 0.5x(65.16+94.58)x2.2

Moment at R (base) = 175.71x1.17-33x(2.2-1.1)-7.92x0.5x2.2
MOMENT ENVELOPE
Moment at Q (base) = -206.90 51.29 -209.03
Moment at R (base) = 160.91 44.37 160.57

kN-m/m
DOCUMENT NO.
DATE 23.05.2018
TITLE: SEQUENTIAL BATCH REACTOR
Envelope unfactored moments at Q REV R0
kN-m/m
Bottom 51.29
kN-m/m
Bottom 160.91
DOCUMENT NO.
DATE 23.05.2018

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � 1- 1-
��
� fy �� fck �1000 �d 2 �
�
M
Q - Top 209.03 313.55 600 542 1390 875 1390

Q - Bot 51.29 76.94 600 542 330 875 875
R - Top 44.37 66.56 600 542 285 875 875
R - Bot 160.91 241.36 600 542 1059 875 1059
Reinf
required
Q - Top 1390 12-180+16-180 1745
Q - Bot 875 00-000+16-140 1436
R - Top 875 00-000+16-180 1117
R - Bot 1059 00-000+16-140 1436
Dist 875 00-000+12-120 942
DOCUMENT NO.
DATE 23.05.2018
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
335.02
0.23
17.67
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
3+2.2+0.3+0.45 5.95
00+600)x3x25/1000) 45.00
3x(600+600)))/1000) 1.500
+600)x2.2x25/1000) 33.00
3x(600+600)))/1000) 1.100
5.8x10.3x3 179.22
0.5x3 1.50
0.2x18x2.2 7.92
0.5x2.2 1.10
0.3+0.45 0.75 m
+600)x0.75x25/1000 11.3
242.5+600/1000)x18 104.4
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
5.95-1.5
5.95-1.5
1.1
0.5x0.75+2.2
2.2+0.45
-240x1/8,
0.8+0.3+0.45+2.2
50x1x(1.6+0.5x0.3
+0.3)/8
-385.738/8
307.606/8, 2.2-1.1
74.858/8
136.644/8
-30-48.217+38.451) 318.10
200.25-36.3-28.969- 727.71
.5+12.813+127.784-
296+9.357+17.081))
727.71/318.1 2.290
0.5x5.95-2.29 0.69
5)x(1-(6x0.69/5.95)) 16.26
0.66-16.26)/5.95)x3 53.77
6.26)/5.95)x(3+0.75) 63.15
5)x(1+(6x0.69/5.95)) 90.66
0.5x(16.26+53.77)x3 105.05
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
))/(3x(16.26+53.77)) 1.23
3-1.5)-179.22x0.5x3 -206.90
5x(63.15+90.66)x2.2 169.19
))/(3x(63.15+90.66)) 1.17
x1.166-33x(2.2-1.1) 160.91
moments are +ve

from P
5.95-1.1
1.5
5.95-1.1
0.5x0.75+3
3+0.3
+45+33+11.25+89.4) 186.57
ABS((+0.23- 598.71
5+37.969+295.004))
598.71/186.57 3.21
5.95-3.209 2.74
0.5x5.95-2.741 0.23
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
)x(1-(6x0.234/5.95)) 23.96
8.76-23.96)/5.95)x3 31.42
3.96)/5.95)x(3+0.75) 33.29
x(1+(6x0.234/5.95)) 38.76
0.5x(23.96+31.42)x3 83.07
))/(3x(23.96+31.42)) 1.43
.07x1.43-45x(3-1.5) 51.29
5x(33.29+38.76)x2.2 79.26
))/(3x(33.29+38.76)) 1.13
.2-1.1)-7.92x0.5x2.2 44.37
moments are +ve

from S
5.95-1.5
0.5x2.2
5.95-1.5
1.1
0.5x0.75+2.2
2.2+0.45
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
+33+11.25+89.4-30- 326.02
48.217+38.451)
-8.712-200.25-36.3- 736.66
.5+12.813+127.784-
296+9.357+17.081))
736.657/326.02 2.26
2.26 2.26
0.5x5.95-2.26 0.72
5)x(1-(6x0.72/5.95)) 15.01
15.01+13.373x3 55.13
01+13.373x(3+0.75) 65.16
5)x(1+(6x0.72/5.95)) 94.58
0.5x(15.01+55.13)x3 105.21
))/(3x(15.01+55.13)) 1.21
3-1.5)-179.22x0.5x3 -209.03
5x(65.16+94.58)x2.2 175.71
))/(3x(65.16+94.58)) 1.17
.2-1.1)-7.92x0.5x2.2 160.57
Case 3
-209.03
160.57
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
D-FTG-M CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
CASE 1 Limiting crack width, w
Q-TOP Characteristic cube strength of Concrete, fck
= SQRT((0.5x90)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
209.03 kN-m
9.33
542 mm
58 mm
90 mm
65.4 mm
110.1 mm
d - d ') = M
6.51 N/mm2
238.3 N/mm2
600 mm
1.35E-03
5.31E-04
8.20E-04
0.151 mm
DOCUMENT NO.
DATE 23.05.2018
R-BOT Characteristic cube strength of Concrete, fck
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
160.91 kN-m
9.33
542 mm
58 mm
140 mm
82.9 mm
102.4 mm
d - d ') = M
5.54 N/mm2
221.9 N/mm2
600 mm
1.26E-03
6.54E-04
6.02E-04
0.132 mm
DOCUMENT NO.
DATE 23.05.2018
D-FTG-M DESIGN OF FOOTING
CASE 2 Grade of Concrete, fck = 30 N/mm2 Grade of Steel, fy = 500

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.500 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 5.80 10.3 Case 1 335.02

Fill 2 Earth 0.20 18.0 Case 2 0.23

G1 = 0.300 G2 = 0.450




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
3.00 600 600 2.20 600 600
Total length of base (m), LB = L1 + L2 + G1 + G2 = 3+2.2+0.3+0.45

3-(3x1000x(2x600+600)/((3x(600+600)))/1000)
2.2-(2.2x1000x(2x600+600)/((3x(600+600)))/1000)
Weight of Fill 1 on Footing, kN/m = 5.8x10.3x3

CG of Weight of Fill 1 from P = 0.5x3
Weight of Fill 2 on Footing, kN/m = 0.2x18x2.2
Gross SBC = 84.6+(243-242.5+600/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018
Addl vertical load on Fill 1 side, Load 1 -30.00 3.75 112.50 -240x1/8,
0.8+0.3+0.45+2.2
Addl moment on Fill 1 side, Load 3 0.00 0.00 12.81 50x1x(1.6+0.5x0.3

+0.3)/8
Reaction Node - Wall - Vertical (STAAD) 72.45 2.65 -192.00 579.572/8
Reaction Node - Col - Vertical (STAAD) -22.21 1.10 24.43 -177.704/8, 2.2-
1.1
Reaction Node - Wall - Moment (STAAD) 0.00 0.00 -9.41 -75.265/8
Reaction Node - Col - Moment (STAAD) 0.00 0.00 -17.43 -139.41/8
Total vertical load P (kN/m) = (179.22-45+33+11.25+89.4-30+72.447-22.213)

236.926+112.5+12.813-191.996+24.434-9.408-
17.426))

DOCUMENT NO.
DATE 23.05.2018
Moment at Q (base), kN-m/m = 166.815x1.427-45x(3-1.5)-179.22x0.5x3

Moment at R (base), kN-m/m = 162.019x1.129-33x(2.2-1.1)

along from P from P
length
V d V*d
kN/m m kN-m/m
Self weight of central portion of footing 11.25 3.38 37.97 0.5x0.75+3
Self weight of wall 89.40 3.30 295.00 3+0.3
Total vertical load P (kN/m) = (+7.92+45+33+11.25+89.4)
Net moment (kN-m/m) = ABS((+0.23-

38.412+67.5+160.05+37.969+295.004))

DOCUMENT NO.
DATE 23.05.2018
Moment at Q (base), kN-m/m = 83.07x1.43-45x(3-1.5)
Moment at R (base), kN-m/m = 79.255x1.128-33x(2.2-1.1)-7.92x0.5x2.2

along from S from S
length
V d V*d
kN/m m kN-m/m


DOCUMENT NO.
DATE 23.05.2018
Addl vertical load on Fill 1 side, Load 1 -30.00 3.75 112.50
Addl moment on Fill 1 side, Load 3 0.00 0.00 12.81
Reaction Node - Wall - Vertical (STAAD) 72.45 2.65 -192.00
Reaction Node - Col - Vertical (STAAD) -22.21 1.10 24.43
Reaction Node - Wall - Moment (STAAD) 0.00 0.00 -9.41
Reaction Node - Col - Moment (STAAD) 0.00 0.00 -17.43
DOCUMENT NO.
DATE 23.05.2018
Total vertical load P (kN/m) = (-179.22+7.92+45+33+11.25+89.4-30+72.447-

22.213)
28.969-236.926+112.5+12.813-191.996+24.434-
9.408-17.426))
Base Pressure at Q = 46.56+6.158x3
Base Pressure at R = 46.56+6.158x(3+0.75)
Total base pressure P-Q = 0.5x(46.56+65.03)x3

Moment at Q (base) = 167.39x1.42-45x(3-1.5)-179.22x0.5x3

Moment at R (base) = 168.14x1.13-33x(2.2-1.1)-7.92x0.5x2.2
MOMENT ENVELOPE
Moment at Q (base) = -98.22 51.29 -98.64
Moment at R (base) = 146.70 44.37 144.99

kN-m/m
DOCUMENT NO.
DATE 23.05.2018
TITLE: SEQUENTIAL BATCH REACTOR
Envelope unfactored moments at Q REV R0
kN-m/m
Bottom 51.29
kN-m/m
Bottom 146.70
DOCUMENT NO.
DATE 23.05.2018

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � 1- 1-
��
� fy �� fck �1000 �d 2 �
�
M
Q - Top 98.64 147.96 600 542 640 875 875

Q - Bot 51.29 76.94 600 542 330 875 875
R - Top 44.37 66.56 600 542 285 875 875
R - Bot 146.70 220.05 600 542 962 875 962
Reinf
required
Q - Top 875 12-180+16-180 1745
Q - Bot 875 00-000+16-140 1436
R - Top 875 00-000+16-180 1117
R - Bot 962 00-000+16-140 1436
Dist 875 00-000+12-120 942
DOCUMENT NO.
DATE 23.05.2018
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
335.02
0.23
17.67
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
3+2.2+0.3+0.45 5.95
00+600)x3x25/1000) 45.00
3x(600+600)))/1000) 1.500
+600)x2.2x25/1000) 33.00
3x(600+600)))/1000) 1.100
5.8x10.3x3 179.22
0.5x3 1.50
0.2x18x2.2 7.92
0.5x2.2 1.10
0.3+0.45 0.75 m
+600)x0.75x25/1000 11.3
242.5+600/1000)x18 104.4
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
5.95-1.5
5.95-1.5
1.1
0.5x0.75+2.2
2.2+0.45
-240x1/8,
0.8+0.3+0.45+2.2
50x1x(1.6+0.5x0.3
+0.3)/8
579.572/8
-177.704/8, 2.2-
1.1
-75.265/8
-139.41/8
-30+72.447-22.213) 378.10
200.25-36.3-28.969- ###
.996+24.434-9.408-
17.426))
1034.04/378.1 2.730
0.5x5.95-2.73 0.25
5)x(1-(6x0.25/5.95)) 47.53
9.57-47.53)/5.95)x3 63.68
7.53)/5.95)x(3+0.75) 67.72
5)x(1+(6x0.25/5.95)) 79.57
0.5x(47.53+63.68)x3 166.82
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
))/(3x(47.53+63.68)) 1.43
3-1.5)-179.22x0.5x3 -98.22
5x(67.72+79.57)x2.2 162.02
))/(3x(67.72+79.57)) 1.13
x1.129-33x(2.2-1.1) 146.70
moments are +ve

from P
5.95-1.1
1.5
5.95-1.1
0.5x0.75+3
3+0.3
+45+33+11.25+89.4) 186.57
ABS((+0.23- 598.71
5+37.969+295.004))
598.71/186.57 3.21
5.95-3.209 2.74
0.5x5.95-2.741 0.23
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
)x(1-(6x0.234/5.95)) 23.96
8.76-23.96)/5.95)x3 31.42
3.96)/5.95)x(3+0.75) 33.29
x(1+(6x0.234/5.95)) 38.76
0.5x(23.96+31.42)x3 83.07
))/(3x(23.96+31.42)) 1.43
.07x1.43-45x(3-1.5) 51.29
5x(33.29+38.76)x2.2 79.26
))/(3x(33.29+38.76)) 1.13
.2-1.1)-7.92x0.5x2.2 44.37
moments are +ve

from S
5.95-1.5
0.5x2.2
5.95-1.5
1.1
0.5x0.75+2.2
2.2+0.45
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
25+89.4-30+72.447- 386.02
22.213)
-8.712-200.25-36.3- ###
13-191.996+24.434-
9.408-17.426))
1042.979/386.02 2.70
2.7 2.70
0.5x5.95-2.7 0.28
5)x(1-(6x0.28/5.95)) 46.56
46.56+6.158x3 65.03
6.56+6.158x(3+0.75) 69.65
5)x(1+(6x0.28/5.95)) 83.20
0.5x(46.56+65.03)x3 167.39
))/(3x(46.56+65.03)) 1.42
3-1.5)-179.22x0.5x3 -98.64
.5x(69.65+83.2)x2.2 168.14
5))/(3x(69.65+83.2)) 1.13
.2-1.1)-7.92x0.5x2.2 144.99
Case 3
-98.64
144.99
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
Q-TOP Characteristic cube strength of Concrete, fck
= SQRT((0.5x90)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
98.64 kN-m
9.33
542 mm
58 mm
90 mm
65.4 mm
110.1 mm
d - d ') = M
3.07 N/mm2
112.4 N/mm2
600 mm
6.37E-04
5.31E-04
1.06E-04
0.020 mm
DOCUMENT NO.
DATE 23.05.2018
R-BOT Characteristic cube strength of Concrete, fck
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
146.70 kN-m
9.33
542 mm
58 mm
140 mm
82.9 mm
102.4 mm
d - d ') = M
5.05 N/mm2
202.3 N/mm2
600 mm
1.14E-03
6.54E-04
4.91E-04
0.108 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W1 D
& FOOTING
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
1D
DOCUMENT NO.
DATE 23.05.2018
WALL W1D DESIGN OF CANTILEVER WALL
Es = 2.00E+05 N/mm2
TOW = 248.500






DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 5.70 m HOW = 5.70 m

of wall
(m)
5.70
5.70 0.0000 1907.5 0.00 0.00
4.28 -0.0026 1907.5 -4.96 0.00
2.85 -0.0208 1907.5 -39.68 0.00
1.43 -0.0703 1907.5 -134.10 0.00
0.00 -0.1667 1907.5 -317.98 0.00

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.70 m

of wall
(m)
5.70
5.70 0.0000 1.4 0.00 0.00
4.28 -0.0026 1.4 0.00 0.00
2.85 -0.0208 1.4 0.00 -0.03
1.43 -0.0703 1.4 0.00 -0.10
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 1.4 0.00 -0.23

(m) e
5.70
5.70 0 0 0 0
4.28 4.96 0 0.47 0.46 5.89017 0
2.85 39.68 0.03 4.32 3.02 47.0232 0.03
1.43 134.1 0.1 14.41 7.75 156.256 0.1
0.00 317.98 0.23 33.50 14.54 366.022 0.23
Mu = M * 1.5 c' = 50+0.5x16 = 58 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

5.700 250 438 438
5.700 0.00 0.00 250 192 0 438 438
4.275 5.89 8.84 250 192 107 438 438
2.850 47.02 70.53 354 296 566 620 620
1.425 156.26 234.38 552 494 1135 875 1135
DOCUMENT NO.
DATE 23.05.2018
0.000 366.02 549.03 750 692 1913 875 1913
bottom M

5.700 250 438 438
5.700 0.00 0.00 250 215 0 438 438
4.275 0.00 0.00 250 215 0 438 438
2.850 0.03 0.05 354 319 0 620 620
1.425 0.10 0.15 552 517 1 875 875
0.000 0.23 0.35 750 715 1 875 875

ρ = 10.3 kN/m3 HOF = 5.70 m HOW = 5.70 m

bottom
(m)
5.70
5.70 0.000 0.000 1907.5 0.00 0.00 0.00 0.00
4.28 0.000 0.000 1907.5 0.00 0.00 0.00 0.00
2.85 0.000 0.000 1907.5 0.00 0.00 0.00 0.00
1.43 0.000 0.000 1907.5 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1907.5 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.70 m

bottom
(m)
5.70
5.70 0.000 0.000 1.4 0.00 0.00 0.00 0.00
4.28 0.000 0.000 1.4 0.00 0.00 0.00 0.00
2.85 0.000 0.000 1.4 0.00 0.00 0.00 0.00
1.43 0.000 0.000 1.4 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1.4 0.00 0.00 0.00 0.00

bottom
of wall
(m)
5.70
5.70 0.00 0.00 0.00 0.00
4.28 0.00 0.00 0.00 0.00
2.85 0.00 0.00 0.00 0.00
1.43 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+10+0.5x10 = 65 mm

DOCUMENT NO.
DATE 23.05.2018
bottom M
5.70 250 438 438
5.70 0.00 0.00 250 185 0 438 438
4.28 0.00 0.00 250 185 0 438 438
2.85 0.00 0.00 354 289 0 620 620
1.43 0.00 0.00 552 487 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 50+10+0.5x10 = 65 mm
bottom M
5.70 250 438 438
5.70 0.00 0.00 250 185 0 438 438
4.28 0.00 0.00 250 185 0 438 438
2.85 0.00 0.00 354 289 0 620 620
1.43 0.00 0.00 552 487 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 30+10+0.5x10 = 45 mm
bottom M

5.70 250 438 438
5.70 0.00 0.00 250 205 0 438 438
DOCUMENT NO.
DATE 23.05.2018
4.28 0.00 0.00 250 205 0 438 438
2.85 0.00 0.00 354 309 0 620 620
1.43 0.00 0.00 552 507 0 875 875
0.00 0.00 0.00 750 705 0 875 875
c' = 30+10+0.5x10 = 45 mm
bottom M

5.70 250 438 438
5.70 0.00 0.00 250 205 0 438 438
4.28 0.00 0.00 250 205 0 438 438
2.85 0.00 0.00 354 309 0 620 620
1.43 0.00 0.00 552 507 0 875 875
0.00 0.00 0.00 750 705 0 875 875

from Reinforcement
bottom
5.70 438 438 00-000+12-160 00-000+10-160 707

5.70 438 438 00-000+12-160 00-000+10-160 707
4.28 438 438 00-000+12-160 00-000+10-160 707
2.85 620 620 10-160+12-160 10-160+10-160 1198
1.43 1135 875 10-160+12-160 10-160+10-160 1198
0.00 1913 875 16-160+12-160 10-160+10-160 1964
1.20 3.60 3.60
Curtail at
Fill 1 / Fill 2
DOCUMENT NO.
DATE 23.05.2018
Curtail at
Fill 1 / Fill 2 1.60 4.00 4.00

bottom

5.70 438 438 438 438
5.70 438 438 438 438
4.28 438 438 438 438
2.85 620 620 620 620
1.43 875 875 875 875
0.00 875 875 875 875

bottom
5.70 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140

5.70 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
4.28 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
2.85 00-000+10-120 00-000+10-120 00-000+10-120 00-000+10-120
1.43 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
0.00 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
1.40 3.60 1.40 3.60
Break at
Fill 1 / Fill 2 1.80 4.00 1.40 4.00

bottom
5.70 561 561 561 561

5.70 561 561 561 561
4.28 561 561 561 561
DOCUMENT NO.
DATE 23.05.2018
2.85 655 655 655 655
1.43 982 982 982 982
0.00 982 982 982 982
Bottom Top
4 0.25 0.00 0.00 0.000 0.000 0.000
3 0.25 0.25 2.10 0.525 0.125 0.125
2 0.75 0.25 3.60 1.800 0.271 0.479
1 0.75 0.75 0.40 0.300 0.375 0.375
Total = 2.625 0.254 0.496
Case 1 317.98 167.32

Case 2 0.23
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.5-242.8 5.70 m
248.5-242.4 6.10 m
5.70 m
One Side
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.7^2x5.7 1907.5
Earth
0.33x18x0.2^2x5.7 1.4
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.7^2x5.7 1907.5
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Earth
0.33x18x0.2^2x5.7 1.4
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
491
491
491
982
982
982
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
NT
POINT
FILL 2
438
438
438
620
875
875
NT
POINT
FILL 2
00-000+10-140
00-000+10-140
00-000+10-140
00-000+10-120
00-000+10-080
00-000+10-080
NT
POINT
FILL 2
561
561
561
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
655
982
982
DOCUMENT NO.
DATE 23.05.2018
WALL W1D CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
366.02 kN-m
9.33
692 mm
35 mm
80 mm
62.5 mm
133.8 mm
d - d ') = M
7.39 N/mm2
287.6 N/mm2
750 mm
1.59E-03
5.78E-04
1.01E-03
0.182 mm
DOCUMENT NO.
DATE 23.05.2018
FTG W1D DESIGN OF FOOTING

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.400 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 5.70 10.3 Case 1 317.98

Fill 2 Earth 0.20 18.0 Case 2 0.23

G1 = 0.254 G2 = 0.496




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
1.85 500 200 2.00 500 200


.85-(1.85x1000x(2x200+500)/((3x(200+500)))/1000)
2-(2x1000x(2x200+500)/((3x(200+500)))/1000)

Gross SBC = 84.6+(243-242.4+500/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

163.766))


DOCUMENT NO.
DATE 23.05.2018

along from P from P
length
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

along from S from S
length
V d V*d
kN/m m kN-m/m


DOCUMENT NO.
DATE 23.05.2018
22.266-163.766))


MOMENT ENVELOPE
Moment at Q (base) = -88.16 29.74 -90.75
Moment at R (base) = 140.06 25.54 138.17

kN-m/m
Bottom 29.74
DOCUMENT NO.
DATE 23.05.2018
kN-m/m
Bottom 140.06

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
M
Q - Top 90.75 136.13 500 444 725 875 875

Q - Bot 29.74 44.61 500 442 234 875 875
R - Top 25.54 38.30 500 444 200 875 875
R - Bot 140.06 210.08 500 442 1142 875 1142
Reinf
required
Q - Top 875 00-000+12-120 942
Q - Bot 875 00-000+16-140 1436
R - Top 875 00-000+12-120 942
R - Bot 1142 00-000+16-140 1436

DOCUMENT NO.
DATE 23.05.2018

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
317.98
0.23
29.00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
1.85+2+0.254+0.496 4.60
200)x1.85x25/1000) 16.19
3x(200+500)))/1000) 1.057
00+200)x2x25/1000) 17.50
3x(200+500)))/1000) 1.143
3x1.85+0.4x18x1.85 121.93
0.5x1.85 0.93
0.2x18x2+0.6x18x2 28.80
0.5x2 1.00
0.254+0.496 0.75 m
+500)x0.75x25/1000 9.38
242.4+500/1000)x18 104.4
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
4.6-0.925
4.6-1.057
1.143
0.5x0.75+2
2+0.496
317.98
711.48
711.479/317.98 2.24
8+17.5+9.375+65.6) 230.59
352-20.003-22.266- 393.50
163.766))
393.5/230.59 1.710
0.5x4.6-1.71 0.59
4.6)x(1-(6x0.59/4.6)) 11.55
.71-11.55)/4.6)x1.85 42.58
55)/4.6)x(1.85+0.75) 55.16
.6)x(1+(6x0.59/4.6)) 88.71
x(11.55+42.58)x1.85 50.07
))/(3x(11.55+42.58)) 0.75
57)-121.93x0.5x1.85 -88.16
0.5x(55.16+88.71)x2 143.87
))/(3x(55.16+88.71)) 1.08
.078-17.5x(2-1.143) 140.06
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
4.6-1
1.057
4.6-1.143
0.5x0.75+1.85
1.85+0.254
0.23
340.14
340.141/0.23 ###
8+17.5+9.375+65.6) 137.46
8+20.859+137.994)) 339.91
339.91/137.46 2.47
4.6-2.473 2.13
0.5x4.6-2.127 0.17
6)x(1-(6x0.173/4.6)) 23.15
62-23.15)/4.6)x1.85 28.57
15)/4.6)x(1.85+0.75) 30.76
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
6)x(1+(6x0.173/4.6)) 36.62
x(23.15+28.57)x1.85 47.84
))/(3x(23.15+28.57)) 0.89
16.188x(1.85-1.057) 29.74
0.5x(30.76+36.62)x2 67.38
))/(3x(30.76+36.62)) 1.03
2-1.143)-28.8x0.5x2 25.54
moments are +ve

from S
4.6-0.925
0.5x2
4.6-1.057
1.143
0.5x0.75+2
2+0.496
317.98
740.51
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
2.33
8+17.5+9.375+65.6) 259.39
28.8-57.352-20.003- 422.53
22.266-163.766))
422.529/259.39 1.63
1.63 1.63
0.5x4.6-1.63 0.67
4.6)x(1-(6x0.67/4.6)) 7.11
7.11+21.426x1.85 46.75
+21.426x(1.85+0.75) 62.82
.6)x(1+(6x0.67/4.6)) 105.67
5x(7.11+46.75)x1.85 49.82
5))/(3x(7.11+46.75)) 0.70
57)-121.93x0.5x1.85 -90.75
5x(62.82+105.67)x2 168.49
/(3x(62.82+105.67)) 1.08
2-1.143)-28.8x0.5x2 138.17
Case 3
-90.75
138.17
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
TRENGTH
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
DOCUMENT NO.
DATE 23.05.2018
FTG W1D CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
140.06 kN-m
9.33
442 mm
36 mm
140 mm
82.9 mm
90.0 mm
d - d ') = M
6.51 N/mm2
237.6 N/mm2
500 mm
1.38E-03
5.54E-04
8.29E-04
0.180 mm
DOCUMENT NO.
DATE 23.05.2018
FTG W1D CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
= SQRT((0.5x120)^2+(50+0.5x12)^2)-0.5x12
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
90.75 kN-m
9.33
444 mm
38 mm
120 mm
76.1 mm
72.4 mm
d - d ') = M
4.83 N/mm2
231.3 N/mm2
500 mm
1.33E-03
8.71E-04
4.60E-04
0.090 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W2
& FOOTING
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
2
DOCUMENT NO.
DATE 23.05.2018
Es = 2.00E+05 N/mm2
TOW = 248.300






DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

of wall
(m)
5.50
5.50 0.0000 1713.7 0.00 0.00
4.13 -0.0026 1713.7 -4.46 0.00
2.75 -0.0208 1713.7 -35.64 0.00
1.38 -0.0703 1713.7 -120.47 0.00
0.00 -0.1667 1713.7 -285.67 0.00

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.50 m

of wall
(m)
5.50
5.50 0.0000 1.3 0.00 0.00
4.13 -0.0026 1.3 0.00 0.00
2.75 -0.0208 1.3 0.00 -0.03
1.38 -0.0703 1.3 0.00 -0.09
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 1.3 0.00 -0.22

(m) e
5.50
5.50 0 0 0 0
4.13 4.46 0 0.47 0.47 5.39263 0
2.75 35.64 0.03 4.32 3.07 43.0249 0.03
1.38 120.47 0.09 14.39 7.94 142.801 0.09
0.00 285.67 0.22 33.46 15.04 334.17 0.22
Mu = M * 1.5 c' = 50+0.5x16 = 58 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

5.500 200 350 350
5.500 0.00 0.00 200 142 0 350 350
4.125 5.39 8.09 200 142 133 350 350
2.750 43.02 64.54 330 272 565 578 578
1.375 142.80 214.20 540 482 1061 875 1061
DOCUMENT NO.
DATE 23.05.2018
0.000 334.17 501.26 750 692 1739 875 1739
bottom M

5.500 200 350 350
5.500 0.00 0.00 200 165 0 350 350
4.125 0.00 0.00 200 165 0 350 350
2.750 0.03 0.05 330 295 0 578 578
1.375 0.09 0.14 540 505 1 875 875
0.000 0.22 0.33 750 715 1 875 875

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

bottom
(m)
5.50
5.50 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1713.7 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

ρ = 18.0 kN/m3 HOF = 0.20 m HOW = 5.50 m

bottom
(m)
5.50
5.50 0.000 0.000 1.3 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1.3 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1.3 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1.3 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1.3 0.00 0.00 0.00 0.00

bottom
of wall
(m)
5.50
5.50 0.00 0.00 0.00 0.00
4.13 0.00 0.00 0.00 0.00
2.75 0.00 0.00 0.00 0.00
1.38 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+10+0.5x10 = 65 mm

DOCUMENT NO.
DATE 23.05.2018
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 135 0 350 350
4.13 0.00 0.00 200 135 0 350 350
2.75 0.00 0.00 330 265 0 578 578
1.38 0.00 0.00 540 475 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 50+10+0.5x10 = 65 mm
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 135 0 350 350
4.13 0.00 0.00 200 135 0 350 350
2.75 0.00 0.00 330 265 0 578 578
1.38 0.00 0.00 540 475 0 875 875
0.00 0.00 0.00 750 685 0 875 875
c' = 30+10+0.5x10 = 45 mm
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 155 0 350 350
DOCUMENT NO.
DATE 23.05.2018
4.13 0.00 0.00 200 155 0 350 350
2.75 0.00 0.00 330 285 0 578 578
1.38 0.00 0.00 540 495 0 875 875
0.00 0.00 0.00 750 705 0 875 875
c' = 30+10+0.5x10 = 45 mm
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 155 0 350 350
4.13 0.00 0.00 200 155 0 350 350
2.75 0.00 0.00 330 285 0 578 578
1.38 0.00 0.00 540 495 0 875 875
0.00 0.00 0.00 750 705 0 875 875

from Reinforcement
bottom
5.50 350 350 00-000+12-160 00-000+10-160 707

5.50 350 350 00-000+12-160 00-000+10-160 707
4.13 350 350 00-000+12-160 00-000+10-160 707
2.75 578 578 10-160+12-160 10-160+10-160 1198
1.38 1061 875 10-160+12-160 10-160+10-160 1198
0.00 1739 875 16-160+12-160 10-160+10-160 1964
1.20 3.60 3.60
Curtail at
Fill 1 / Fill 2
DOCUMENT NO.
DATE 23.05.2018
Curtail at
Fill 1 / Fill 2 1.60 4.00 4.00

bottom

5.50 350 350 350 350
5.50 350 350 350 350
4.13 350 350 350 350
2.75 578 578 578 578
1.38 875 875 875 875
0.00 875 875 875 875

bottom
5.50 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140

5.50 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
4.13 00-000+10-140 00-000+10-140 00-000+10-140 00-000+10-140
2.75 00-000+10-120 00-000+10-120 00-000+10-120 00-000+10-120
1.38 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
0.00 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
1.40 3.60 1.40 3.60
Break at
Fill 1 / Fill 2 1.80 4.00 1.40 4.00

bottom
5.50 561 561 561 561

5.50 561 561 561 561
4.13 561 561 561 561
DOCUMENT NO.
DATE 23.05.2018
2.75 655 655 655 655
1.38 982 982 982 982
0.00 982 982 982 982
Bottom Top
4 0.20 0.00 0.00 0.000 0.000 0.000
3 0.20 0.20 1.90 0.380 0.100 0.100
2 0.75 0.20 3.60 1.710 0.264 0.486
1 0.75 0.75 0.40 0.300 0.375 0.375
Total = 2.390 0.252 0.498
Case 1 285.67 155.79

Case 2 0.22
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.3-242.8 5.50 m
248.3-242.4 5.90 m
5.50 m
One Side
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
Earth
0.33x18x0.2^2x5.5 1.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Earth
0.33x18x0.2^2x5.5 1.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
491
491
491
982
982
982
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
NT
POINT
FILL 2
350
350
350
578
875
875
NT
POINT
FILL 2
00-000+10-140
00-000+10-140
00-000+10-140
00-000+10-120
00-000+10-080
00-000+10-080
NT
POINT
FILL 2
561
561
561
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
655
982
982
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
334.17 kN-m
9.33
692 mm
35 mm
80 mm
62.5 mm
133.8 mm
d - d ') = M
6.75 N/mm2
262.7 N/mm2
750 mm
1.45E-03
5.78E-04
8.73E-04
0.157 mm
DOCUMENT NO.
DATE 23.05.2018

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.400 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 5.50 10.3 Case 1 285.67

Fill 2 Earth 0.20 18.0 Case 2 0.22

G1 = 0.252 G2 = 0.498




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
1.85 500 200 2.00 500 200


.85-(1.85x1000x(2x200+500)/((3x(200+500)))/1000)
2-(2x1000x(2x200+500)/((3x(200+500)))/1000)

Gross SBC = 84.6+(243-242.4+500/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

149.387))


DOCUMENT NO.
DATE 23.05.2018

along from P from P
length
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

along from S from S
length
V d V*d
kN/m m kN-m/m


DOCUMENT NO.
DATE 23.05.2018
22.266-149.387))


MOMENT ENVELOPE
Moment at Q (base) = -79.13 27.36 -81.43
Moment at R (base) = 125.58 23.43 124.51

kN-m/m
Bottom 27.36
DOCUMENT NO.
DATE 23.05.2018
kN-m/m
Bottom 125.58

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
M
Q - Top 81.43 122.15 500 444 649 875 875

Q - Bot 27.36 41.05 500 442 215 875 875
R - Top 23.43 35.14 500 444 183 875 875
R - Bot 125.58 188.37 500 442 1019 875 1019
Reinf
required
Q - Top 875 00-000+12-120 942
Q - Bot 875 00-000+16-140 1436
R - Top 875 00-000+12-120 942
R - Bot 1019 00-000+16-140 1436

DOCUMENT NO.
DATE 23.05.2018
CHECK FOR SLIDING
Sliding Force (kN/m) =

Self-weight of Wall (kN/m) =
Self-weight of Footing (kN/m) =
Weight of Fill 1 on Footing (kN/m) =
Total Weight (kN/m) = 59.8+43.063+118.12
Coefficient of friction between concrete and earth =

Resisting Force (kN/m) =
Balance direct tensile force to be resisted by Nominal Slab (kN/m) =
Check for the crack width attached along with

DOCUMENT NO.
DATE 23.05.2018
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
285.67
0.22
57.00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
1.85+2+0.252+0.498 4.60
200)x1.85x25/1000) 16.19
3x(200+500)))/1000) 1.057
00+200)x2x25/1000) 17.50
3x(200+500)))/1000) 1.143
3x1.85+0.4x18x1.85 118.12
0.5x1.85 0.93
0.2x18x2+0.6x18x2 28.80
0.5x2 1.00
0.252+0.498 0.75 m
+500)x0.75x25/1000 9.38
242.4+500/1000)x18 104.4
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
4.6-0.925
4.6-1.057
1.143
0.5x0.75+2
2+0.498
285.67
683.10
683.099/285.67 2.39
8+17.5+9.375+59.8) 220.98
352-20.003-22.266- 397.43
149.387))
397.43/220.98 1.800
0.5x4.6-1.8 0.50
/4.6)x(1-(6x0.5/4.6)) 16.71
37-16.71)/4.6)x1.85 41.91
71)/4.6)x(1.85+0.75) 52.13
4.6)x(1+(6x0.5/4.6)) 79.37
x(16.71+41.91)x1.85 54.22
))/(3x(16.71+41.91)) 0.79
57)-118.12x0.5x1.85 -79.13
0.5x(52.13+79.37)x2 131.50
))/(3x(52.13+79.37)) 1.07
.069-17.5x(2-1.143) 125.58
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
4.6-1
1.057
4.6-1.143
0.5x0.75+1.85
1.85+0.252
0.22
327.84
327.84/0.22 ###
8+17.5+9.375+59.8) 131.66
8+20.859+125.693)) 327.62
327.62/131.66 2.49
4.6-2.488 2.11
0.5x4.6-2.112 0.19
6)x(1-(6x0.188/4.6)) 21.59
65-21.59)/4.6)x1.85 27.24
59)/4.6)x(1.85+0.75) 29.54
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
6)x(1+(6x0.188/4.6)) 35.65
x(21.59+27.24)x1.85 45.17
))/(3x(21.59+27.24)) 0.89
16.188x(1.85-1.057) 27.36
0.5x(29.54+35.65)x2 65.19
))/(3x(29.54+35.65)) 1.03
2-1.143)-28.8x0.5x2 23.43
moments are +ve

from S
4.6-0.925
0.5x2
4.6-1.057
1.143
0.5x0.75+2
2+0.498
285.67
712.12
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
2.49
8+17.5+9.375+59.8) 249.78
28.8-57.352-20.003- 426.45
22.266-149.387))
426.449/249.78 1.71
1.71 1.71
0.5x4.6-1.71 0.59
4.6)x(1-(6x0.59/4.6)) 12.51
12.51+18.17x1.85 46.12
1+18.17x(1.85+0.75) 59.75
.6)x(1+(6x0.59/4.6)) 96.09
x(12.51+46.12)x1.85 54.23
))/(3x(12.51+46.12)) 0.75
57)-118.12x0.5x1.85 -81.43
0.5x(59.75+96.09)x2 155.84
))/(3x(59.75+96.09)) 1.08
2-1.143)-28.8x0.5x2 124.51
Case 3
-81.43
124.51
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
TRENGTH
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
155.79
59.80
43.06
118.12
59.8+43.063+118.12 220.98
0.45
99.44
56.35
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
125.58 kN-m
9.33
442 mm
36 mm
140 mm
82.9 mm
90.0 mm
d - d ') = M
5.84 N/mm2
213.1 N/mm2
500 mm
1.24E-03
5.54E-04
6.87E-04
0.150 mm
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x120)^2+(50+0.5x12)^2)-0.5x12
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
81.43 kN-m
9.33
444 mm
38 mm
120 mm
76.1 mm
72.4 mm
d - d ') = M
4.33 N/mm2
207.4 N/mm2
500 mm
1.19E-03
8.71E-04
3.22E-04
0.070 mm
DOCUMENT NO.
DATE 23.05.2018
FTG W2 CALCULATION OF CRACK WIDTH - FLEXURE & TENSION (IS 3370 Part 2 - 2009, Annexure
Junction Limiting crack width, w
with Base Characteristic cube strength of Concrete, fck
Applied Tension at service condition, N
Distance between centroid of Ast and Asc, Zs = 200-50-0.5x10-50-0.5x10
Distance - Centroid of Ast to CG of Ast & Asc, Xs
= 359x90/(359+359)
Modified Moment M' = M - N * Xs
Modified moment, M' < 0, section in tension

DOCUMENT NO.
DATE 23.05.2018
Tension excess tensile face, T'
= (56.345x359/(359+359))
Tension less tensile face, T''
= (56.345x359/(359+359))
Stress in Tension reinforcement, fst = 28.173x1000/359
Total Concrete Area, Ac = 1000x200+(9.33-1)x(359+359)
Direct Tension in Concrete, fct = 56.345x1000/205980.9
Distance from comp face to point where crack width is being calculated, a
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x220)^2+(50+0.5x10)^2)-0.5x10
Strain at the level considered, ε1 = fs / Es
Strain due to stiffening effect in concrete, ε2 = 2bD/3EsAs
Crack Width, w = 3 acr εm

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
Part 2 - 2009, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
0.0 kN-m
56.35 kN-m
9.33
90.0 mm
45.0 mm
-2.5 kN-m
OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
145 mm
55 mm
28.2 kN
28.2 kN
78.5 N/mm2
2.1E+05 mm2
0.27 N/mm2
200 mm
OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
220 mm
118.0 mm
3.92E-04
9.29E-04
-5.36E-04
-0.190 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W3
& FOOTING
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
3
DOCUMENT NO.
DATE 23.05.2018
Es = 2.00E+05 N/mm2
TOW = 248.300


Height from bottom 0.00 3.60 5.50 Taper = Both Sides




DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

of wall
(m)
5.50
5.50 0.0000 1713.7 0.00 0.00
4.13 -0.0026 1713.7 -4.46 0.00
2.75 -0.0208 1713.7 -35.64 0.00
1.38 -0.0703 1713.7 -120.47 0.00
0.00 -0.1667 1713.7 -285.67 0.00

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

of wall
(m)
5.50
5.50 0.0000 1713.7 0.00 0.00
4.13 -0.0026 1713.7 0.00 -4.46
2.75 -0.0208 1713.7 0.00 -35.64
1.38 -0.0703 1713.7 0.00 -120.47
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 1713.7 0.00 -285.67

(m) e
5.50
5.50 0 0 0 0
4.13 4.46 4.46 0.47 0.47 5.39263 5.392627
2.75 35.64 35.64 4.32 3.07 43.0249 43.02492
1.38 120.47 120.47 14.39 7.94 142.801 142.8008
0.00 285.67 285.67 33.46 15.04 334.17 334.17
Mu = M * 1.5 c' = 50+0.5x16 = 58 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

5.500 200 350 350
5.500 0.00 0.00 200 142 0 350 350
4.125 5.39 8.09 200 142 133 350 350
2.750 43.02 64.54 330 272 565 578 578
1.375 142.80 214.20 540 482 1061 875 1061
DOCUMENT NO.
DATE 23.05.2018
0.000 334.17 501.26 750 692 1739 875 1739
bottom M

5.500 200 350 350
5.500 0.00 0.00 200 142 0 350 350
4.125 5.39 8.09 200 142 133 350 350
2.750 43.02 64.54 330 272 565 578 578
1.375 142.80 214.20 540 482 1061 875 1061
0.000 334.17 501.26 750 692 1739 875 1739

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

bottom
(m)
5.50
5.50 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1713.7 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 5.50 m HOW = 5.50 m

bottom
(m)
5.50
5.50 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
4.13 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
2.75 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
1.38 0.000 0.000 1713.7 0.00 0.00 0.00 0.00
0.00 0.000 0.000 1713.7 0.00 0.00 0.00 0.00

bottom
of wall
(m)
5.50
5.50 0.00 0.00 0.00 0.00
4.13 0.00 0.00 0.00 0.00
2.75 0.00 0.00 0.00 0.00
1.38 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+16+0.5x10 = 71 mm

DOCUMENT NO.
DATE 23.05.2018
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 129 0 350 350
4.13 0.00 0.00 200 129 0 350 350
2.75 0.00 0.00 330 259 0 578 578
1.38 0.00 0.00 540 469 0 875 875
0.00 0.00 0.00 750 679 0 875 875
c' = 50+16+0.5x10 = 71 mm
bottom M
5.50 200 350 350
5.50 0.00 0.00 200 129 0 350 350
4.13 0.00 0.00 200 129 0 350 350
2.75 0.00 0.00 330 259 0 578 578
1.38 0.00 0.00 540 469 0 875 875
0.00 0.00 0.00 750 679 0 875 875
c' = 50+16+0.5x10 = 71 mm
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 129 0 350 350
DOCUMENT NO.
DATE 23.05.2018
4.13 0.00 0.00 200 129 0 350 350
2.75 0.00 0.00 330 259 0 578 578
1.38 0.00 0.00 540 469 0 875 875
0.00 0.00 0.00 750 679 0 875 875
c' = 50+16+0.5x10 = 71 mm
bottom M

5.50 200 350 350
5.50 0.00 0.00 200 129 0 350 350
4.13 0.00 0.00 200 129 0 350 350
2.75 0.00 0.00 330 259 0 578 578
1.38 0.00 0.00 540 469 0 875 875
0.00 0.00 0.00 750 679 0 875 875

from Reinforcement
bottom
5.50 350 350 00-000+12-160 00-000+12-160 707

5.50 350 350 00-000+12-160 00-000+12-160 707
4.13 350 350 00-000+12-160 00-000+12-160 707
2.75 578 578 10-160+12-160 10-160+12-160 1198
1.38 1061 1061 10-160+12-160 10-160+12-160 1198
0.00 1739 1739 16-160+12-160 16-160+12-160 1964
1.20 3.60 1.20 3.60
Curtail at
Fill 1 / Fill 2
DOCUMENT NO.
DATE 23.05.2018
Curtail at
Fill 1 / Fill 2 1.60 4.00 1.60 4.00

bottom

5.50 350 350 350 350
5.50 350 350 350 350
4.13 350 350 350 350
2.75 578 578 578 578
1.38 875 875 875 875
0.00 875 875 875 875

bottom
5.50 00-000+10-150 00-000+10-150 00-000+10-150 00-000+10-150

5.50 00-000+10-150 00-000+10-150 00-000+10-150 00-000+10-150
4.13 00-000+10-150 00-000+10-150 00-000+10-150 00-000+10-150
2.75 00-000+10-110 00-000+10-110 00-000+10-110 00-000+10-110
1.38 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
0.00 00-000+10-080 00-000+10-080 00-000+10-080 00-000+10-080
1.40 3.60 1.40 3.60
Break at
Fill 1 / Fill 2 1.80 4.00 1.40 4.00

bottom
5.50 524 524 524 524

5.50 524 524 524 524
4.13 524 524 524 524
DOCUMENT NO.
DATE 23.05.2018
2.75 714 714 714 714
1.38 982 982 982 982
0.00 982 982 982 982
Bottom Top
4 0.20 0.00 0.00 0.000 0.000 0.000
3 0.20 0.20 1.90 0.380 0.100 0.100
2 0.75 0.20 3.60 1.710 0.375 0.375
1 0.75 0.75 0.40 0.300 0.375 0.375
Total = 2.390 0.375 0.375
Case 1 285.67 155.79

Case 2 285.67
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.3-242.8 5.50 m
248.3-242.4 5.90 m
5.50 m
Both Sides
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
Liquid
1x10.3x5.5^2x5.5 1713.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x5.5^2x5.5 1713.7
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
707
707
707
1198
1198
1964
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
NT
POINT
FILL 2
350
350
350
578
875
875
NT
POINT
FILL 2
00-000+10-150
00-000+10-150
00-000+10-150
00-000+10-110
00-000+10-080
00-000+10-080
NT
POINT
FILL 2
524
524
524
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
714
982
982
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x80)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
A sc f sc = (1.5m -1) A sc f c (d - ) + A sc fsc (d - d ') = M
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
334.17 kN-m
9.33
692 mm
38 mm
80 mm
62.5 mm
127.1 mm
d - d ') = M
6.31 N/mm2
261.7 N/mm2
750 mm
1.44E-03
5.83E-04
8.59E-04
0.155 mm
DOCUMENT NO.
DATE 23.05.2018

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.400 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 5.50 10.3 Case 1 285.67
Fill 2 Liquid 5.50 10.3 Case 2 285.67

G1 = 0.375 G2 = 0.375

Th1F1 = Thicness of footing Fill 1 near wall Liquid Liquid


m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
1.80 500 200 1.80 500 200

Total length of base (m), LB = L1 + L2 + G1 + G2 = 1.8+1.8+0.375+0.375

1.8-(1.8x1000x(2x200+500)/((3x(200+500)))/1000)
1.8-(1.8x1000x(2x200+500)/((3x(200+500)))/1000)

Gross SBC = 84.6+(243-242.4+500/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

130.065))
Base Pressure at Q (interpolated) = 5.13+((94-5.13)/4.35)x1.8
Base Pressure at R (interpolated) = 5.13+((94-5.13)/4.35)x(1.8+0.75)

Total base pressure R-S, kN = 0.5x(57.23+94)x1.8

CG of base pressure R-S from R = (1.8x(2x94+57.23))/(3x(57.23+94))
Moment at R (base), kN-m/m = 136.107x0.973-15.75x(1.8-1.029)
DOCUMENT NO.
DATE 23.05.2018

along from P from P
length
V d V*d
kN/m m kN-m/m

Net moment (kN-m/m) = ABS((-285.67-
418.865+16.207+52.306+20.391+130.065))
Base Pressure at P = (222.09/4.35)x(1-(6x-0.589/4.35))
Base Pressure at S = (222.09/4.35)x(1+(6x-0.589/4.35))

DOCUMENT NO.
DATE 23.05.2018
Moment at R (base), kN-m/m = 48.105x0.707-15.75x(1.8-1.029)-121.41x0.5x1.8

along from S from S
length
V d V*d
kN/m m kN-m/m


Net moment (kN-m/m) = 7-396.509-109.269-52.306-16.207-20.391-130.065))
DOCUMENT NO.
DATE 23.05.2018


Moment at R (base) = 141.71x0.9-15.75x(1.8-1.029)-121.41x0.5x1.8
MOMENT ENVELOPE
Moment at Q (base) = -87.41 119.48 7.91
Moment at R (base) = 120.28 -87.39 6.13

kN-m/m
Bottom 119.48
kN-m/m
Bottom 120.28

DOCUMENT NO.
DATE 23.05.2018

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � �
�� 1 - 1 - �
� fy �� fck �1000 �d 2 �
�
M
Q - Top 87.41 131.12 500 444 697 875 875

Q - Bot 119.48 179.21 500 442 968 875 968
R - Top 87.39 131.09 500 444 697 875 875
R - Bot 120.28 180.42 500 442 975 875 975
Location Reinf Reinforcement Provided

required
Q - Top 875 00-000+12-120 942
Q - Bot 968 00-000+16-140 1436
R - Top 875 00-000+12-120 942
R - Bot 975 00-000+16-140 1436

DOCUMENT NO.
DATE 23.05.2018

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
285.67
285.67
57.00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
.8+1.8+0.375+0.375 4.35
+200)x1.8x25/1000) 15.75
3x(200+500)))/1000) 1.029
+200)x1.8x25/1000) 15.75
3x(200+500)))/1000) 1.029
0.3x1.8+0.4x18x1.8 114.93
0.5x1.8 0.90
0.3x1.8+0.6x18x1.8 121.41
0.5x1.8 0.90
0.375+0.375 0.75 m
+500)x0.75x25/1000 9.4
242.4+500/1000)x18 104.4
moments are +ve

Explanation of
from S
4.35-0.9
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
4.35-1.029
1.029
0.5x0.75+1.8
1.8+0.375
285.67
615.48
615.477/285.67 2.15
+15.75+9.375+59.8) 215.61
306-16.207-20.391- 329.81
130.065))
329.81/215.61 1.530
0.5x4.35-1.53 0.65
5)x(1-(6x0.65/4.35)) 5.13
((94-5.13)/4.35)x1.8 41.90
13)/4.35)x(1.8+0.75) 57.23
5)x(1+(6x0.65/4.35)) 94.00
0.5x(5.13+41.9)x1.8 42.33
1.9))/(3x(5.13+41.9)) 0.67
029)-114.93x0.5x1.8 -87.41
0.5x(57.23+94)x1.8 136.11
.23))/(3x(57.23+94)) 0.97
3-15.75x(1.8-1.029) 120.28
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
4.35-0.9
1.029
4.35-1.029
0.5x0.75+1.8
1.8+0.375
285.67
637.83
637.833/285.67 2.23
+15.75+9.375+59.8) 222.09
ABS((-285.67- 352.16
6+20.391+130.065))
352.16/222.09 1.59
4.35-1.586 2.76
0.5x4.35-2.764 -0.59
x(1-(6x-0.589/4.35)) 92.56
55-92.56)/4.35)x1.8 58.21
56)/4.35)x(1.8+0.75) 43.90
x(1+(6x-0.589/4.35)) 9.55
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
5x(92.56+58.21)x1.8 135.69
))/(3x(92.56+58.21)) 0.97
7-15.75x(1.8-1.029) 119.48
0.5x(43.9+9.55)x1.8 48.11
3.9))/(3x(43.9+9.55)) 0.71
029)-121.41x0.5x1.8 -87.39
moments are +ve

from S
4.35-0.9
0.5x1.8
4.35-1.029
1.029
0.5x0.75+1.8
1.8+0.375
285.67
###
3.54
+15.75+9.375+59.8) 337.02
07-20.391-130.065)) 724.75
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
724.746/337.02 2.15
2.15 2.15
0.5x4.35-2.15 0.02
5)x(1-(6x0.02/4.35)) 75.34
75.34+0.982x1.8 77.11
34+0.982x(1.8+0.75) 77.84
5)x(1+(6x0.02/4.35)) 79.61
5x(75.34+77.11)x1.8 137.21
))/(3x(75.34+77.11)) 0.90
029)-114.93x0.5x1.8 7.91
5x(77.84+79.61)x1.8 141.71
))/(3x(77.84+79.61)) 0.90
029)-121.41x0.5x1.8 6.13
Case 3
7.91
6.13
TRENGTH
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
628
0+0.5x(500+200))/2 425
N(0.5x425,250)/100 744
808
0+0.5x(500+200))/2 275
N(0.5x275,250)/100 481
628
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x140)^2+(50+0.5x16)^2)-0.5x16
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
120.28 kN-m
9.33
442 mm
36 mm
140 mm
82.9 mm
90.0 mm
d - d ') = M
5.59 N/mm2
204.0 N/mm2
500 mm
1.19E-03
5.54E-04
6.34E-04
0.136 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W4
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
4
DOCUMENT NO.
DATE 23.05.2018
Es = 2.00E+05 N/mm2
TOW = 248.300


Height from bottom 0.00 5.50 Taper = Both Sides
Provided thickness 250 250 +




DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 2.51 m HOW = 2.51 m

of wall
(m)
5.50
2.51 0.0000 162.9 0.00 0.00
1.88 -0.0026 162.9 -0.42 0.00
1.26 -0.0208 162.9 -3.39 0.00
0.63 -0.0703 162.9 -11.45 0.00
0.00 -0.1667 162.9 -27.16 0.00

ρ = 10.3 kN/m3 HOF = 2.51 m HOW = 2.51 m

of wall
(m)
5.50
2.51 0.0000 162.9 0.00 0.00
1.88 -0.0026 162.9 0.00 -0.42
1.26 -0.0208 162.9 0.00 -3.39
0.63 -0.0703 162.9 0.00 -11.45
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 162.9 0.00 -27.16
Ht from Moment Moment

of wall
(m)
5.50
2.51 0 0
1.88 0.42 0.42
1.26 3.39 3.39
0.63 11.45 11.45
0.00 27.16 27.16
Mu = M * 1.5 c' = 50+0.5x10 = 55 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

5.500 250 300 300
2.510 0.00 0.00 250 195 0 300 300
1.883 0.42 0.63 250 195 7 300 300
1.255 3.39 5.09 250 195 60 300 300
0.627 11.45 17.18 250 195 206 300 300
DOCUMENT NO.
DATE 23.05.2018
0.000 27.16 40.74 250 195 502 300 502
bottom M

5.500 250 300 300
2.510 0.00 0.00 250 195 0 300 300
1.883 0.42 0.63 250 195 7 300 300
1.255 3.39 5.09 250 195 60 300 300
0.627 11.45 17.18 250 195 206 300 300
0.000 27.16 40.74 250 195 502 300 502

ρ = 10.3 kN/m3 HOF = 2.51 m HOW = 2.51 m

bottom
(m)
5.50
2.51 0.000 0.000 162.9 0.00 0.00 0.00 0.00
1.88 0.000 0.000 162.9 0.00 0.00 0.00 0.00
1.26 0.000 0.000 162.9 0.00 0.00 0.00 0.00
0.63 0.000 0.000 162.9 0.00 0.00 0.00 0.00
0.00 0.000 0.000 162.9 0.00 0.00 0.00 0.00
DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 2.51 m HOW = 2.51 m

bottom
(m)
5.50
2.51 0.000 0.000 162.9 0.00 0.00 0.00 0.00
1.88 0.000 0.000 162.9 0.00 0.00 0.00 0.00
1.26 0.000 0.000 162.9 0.00 0.00 0.00 0.00
0.63 0.000 0.000 162.9 0.00 0.00 0.00 0.00
0.00 0.000 0.000 162.9 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

bottom
of wall
(m)
5.50
2.51 0.00 0.00 0.00 0.00
1.88 0.00 0.00 0.00 0.00
1.26 0.00 0.00 0.00 0.00
0.63 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+10+0.5x10 = 65 mm
bottom M
5.50 250 300 300
2.51 0.00 0.00 250 185 0 300 300
1.88 0.00 0.00 250 185 0 300 300
1.26 0.00 0.00 250 185 0 300 300
0.63 0.00 0.00 250 185 0 300 300
0.00 0.00 0.00 250 185 0 300 300
c' = 50+10+0.5x10 = 65 mm
bottom M
DOCUMENT NO.
DATE 23.05.2018
5.50 250 300 300
2.51 0.00 0.00 250 185 0 300 300
1.88 0.00 0.00 250 185 0 300 300
1.26 0.00 0.00 250 185 0 300 300
0.63 0.00 0.00 250 185 0 300 300
0.00 0.00 0.00 250 185 0 300 300
c' = 50+10+0.5x10 = 65 mm
bottom M

5.50 250 300 300
2.51 0.00 0.00 250 185 0 300 300
1.88 0.00 0.00 250 185 0 300 300
1.26 0.00 0.00 250 185 0 300 300
0.63 0.00 0.00 250 185 0 300 300
0.00 0.00 0.00 250 185 0 300 300
c' = 50+10+0.5x10 = 65 mm
bottom M

5.50 250 300 300
2.51 0.00 0.00 250 185 0 300 300
1.88 0.00 0.00 250 185 0 300 300
1.26 0.00 0.00 250 185 0 300 300
DOCUMENT NO.
DATE 23.05.2018
0.63 0.00 0.00 250 185 0 300 300
0.00 0.00 0.00 250 185 0 300 300
DOCUMENT NO.
DATE 23.05.2018

from Reinforcement
bottom
5.50 300 300 00-000+10-200 00-000+10-200 393

2.51 300 300 00-000+10-200 00-000+10-200 393
1.88 300 300 00-000+10-200 00-000+10-200 393
1.26 300 300 00-000+10-200 00-000+10-200 393
0.63 300 300 10-200+10-200 10-200+10-200 785
0.00 502 502 10-200+10-200 10-200+10-200 785
1.20 1.20
Curtail at
Fill 1 / Fill 2 1.20 1.20

bottom

5.50 300 300 300 300
2.51 300 300 300 300
1.88 300 300 300 300
1.26 300 300 300 300
0.63 300 300 300 300
0.00 300 300 300 300

bottom
5.50 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180

2.51 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180
DOCUMENT NO.
DATE 23.05.2018
1.88 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180
1.26 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180
0.63 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180
0.00 00-000+10-180 00-000+10-180 00-000+10-180 00-000+10-180
Break at
Fill 1 / Fill 2

bottom
5.50 436 436 436 436

2.51 436 436 436 436
1.88 436 436 436 436
1.26 436 436 436 436
0.63 436 436 436 436
0.00 436 436 436 436
Bottom Top
4 0.00 0.00 0.00 0.000 0.000 0.000
3 0.25 0.00 0.00 0.000 0.000 0.000
2 0.25 0.25 5.50 1.375 0.125 0.125
1 0.25 0.25 0.00 0.000 0.000 0.000
Total = 1.375 0.125 0.125

DOCUMENT NO.
DATE 23.05.2018
Case 1 27.16
Case 2 27.16
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
248.3-242.8 5.50 m
248.3-242.8 5.50 m
2.51 m
Both Sides
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x2.51^2x2.51 162.9
Liquid
1x10.3x2.51^2x2.51 162.9
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x2.51^2x2.51 162.9
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x2.51^2x2.51 162.9
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
393
393
393
393
785
785
NT
POINT
FILL 2
300
300
300
300
300
300
NT
POINT
FILL 2
00-000+10-180
00-000+10-180
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
00-000+10-180
00-000+10-180
00-000+10-180
00-000+10-180
NT
POINT
FILL 2
436
436
436
436
436
436
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x100)^2+(50+0.5x10)^2)-0.5x10
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
27.16 kN-m
9.33
195 mm
35 mm
100 mm
69.3 mm
44.8 mm
d - d ') = M
6.18 N/mm2
193.3 N/mm2
250 mm
1.32E-03
5.91E-04
7.29E-04
0.128 mm
DOCUMENT NO.
DATE 23.05.2018

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.800 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 2.51 10.3 Case 1 27.16

Fill 2 Liquid 2.51 10.3 Case 2 27.16

G1 = 0.125 G2 = 0.125




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
0.90 200 200 0.90 200 200


0.9-(0.9x1000x(2x200+200)/((3x(200+200)))/1000)
0.9-(0.9x1000x(2x200+200)/((3x(200+200)))/1000)
Weight of Fill 1 on Footing, kN/m = 2.51x10.3x0.9

Gross SBC = 47+(243-242.8+200/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018
Net moment (kN-m/m) = ABS((27.16+37.232+7.2-2.025-1.281-35.26))


DOCUMENT NO.
DATE 23.05.2018

along from P from P
length
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018

along from S from S
length
V d V*d
kN/m m kN-m/m


DOCUMENT NO.
DATE 23.05.2018
Net moment (kN-m/m) = ABS((27.16-27.16-37.232-10.472-7.2-2.025-1.281-
35.26))
Base Pressure at Q = 45.78-1.268x0.9
Base Pressure at R = 45.78-1.268x(0.9+0.25)


MOMENT ENVELOPE
Moment at Q (base) = -4.91 17.06 5.81
Moment at R (base) = 17.23 -4.71 5.22

kN-m/m
Bottom 17.06
DOCUMENT NO.
DATE 23.05.2018
kN-m/m
Bottom 17.23

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
M
Q - Top 4.91 7.37 200 146 118 240 240

Q - Bot 17.06 25.58 200 145 427 240 427
R - Top 4.71 7.07 200 146 113 240 240
R - Bot 17.23 25.84 200 145 431 240 431
Reinf
required
Q - Top 240 00-000+08-150 335
Q - Bot 427 00-000+10-150 524
R - Top 240 00-000+08-150 335
R - Bot 431 00-000+10-150 524

DOCUMENT NO.
DATE 23.05.2018

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
27.16
27.16
9.52
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
.9+0.9+0.125+0.125 2.05
+200)x0.9x25/1000) 4.50
3x(200+200)))/1000) 0.450
+200)x0.9x25/1000) 4.50
3x(200+200)))/1000) 0.450
2.51x10.3x0.9 23.27
0.5x0.9 0.45
2.51x10.3x0.9 23.27
0.5x0.9 0.45
0.125+0.125 0.25 m
+200)x0.25x25/1000 1.25
242.8+200/1000)x18 54.2
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
2.05-0.45
2.05-0.45
0.45
0.5x0.25+0.9
0.9+0.125
27.16
83.00
82.998/27.16 3.06
4.5+4.5+1.25+34.4) 67.92
2.025-1.281-35.26)) 55.84
55.84/67.92 0.820
0.5x2.05-0.82 0.21
5)x(1-(6x0.21/2.05)) 12.77
3.5-12.77)/2.05)x0.9 30.65
77)/2.05)x(0.9+0.25) 35.62
5)x(1+(6x0.21/2.05)) 53.50
5x(12.77+30.65)x0.9 19.54
))/(3x(12.77+30.65)) 0.39
0.45)-23.27x0.5x0.9 -4.91
.5x(35.62+53.5)x0.9 40.10
2))/(3x(35.62+53.5)) 0.48
x0.48-4.5x(0.9-0.45) 17.23
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
2.05-0.45
0.45
2.05-0.45
0.5x0.25+0.9
0.9+0.125
27.16
83.00
82.998/27.16 3.06
4.5+4.5+1.25+34.4) 67.92
+7.2+1.281+35.26)) 55.84
55.84/67.92 0.82
2.05-0.822 1.23
0.5x2.05-1.228 -0.20
x(1-(6x-0.203/2.05)) 52.80
3.46-52.8)/2.05)x0.9 35.53
.8)/2.05)x(0.9+0.25) 30.73
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
x(1+(6x-0.203/2.05)) 13.46
.5x(52.8+35.53)x0.9 39.75
3))/(3x(52.8+35.53)) 0.48
x0.48-4.5x(0.9-0.45) 17.06
5x(30.73+13.46)x0.9 19.89
))/(3x(30.73+13.46)) 0.39
0.45)-23.27x0.5x0.9 -4.71
moments are +ve

from S
2.05-0.45
0.5x0.9
2.05-0.45
0.45
0.5x0.25+0.9
0.9+0.125
27.16
120.63
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
4.44
4.5+4.5+1.25+34.4) 91.19
72-7.2-2.025-1.281- 93.47
35.26))
93.47/91.19 1.03
1.03 1.03
0.5x2.05-1.03 -0.01
5)x(1-(6x-0.01/2.05)) 45.78
45.78-1.268x0.9 44.64
78-1.268x(0.9+0.25) 44.32
)x(1+(6x-0.01/2.05)) 43.18
5x(45.78+44.64)x0.9 40.69
))/(3x(45.78+44.64)) 0.45
0.45)-23.27x0.5x0.9 5.81
5x(44.32+43.18)x0.9 39.38
))/(3x(44.32+43.18)) 0.45
0.45)-23.27x0.5x0.9 5.22
Case 3
5.81
5.22
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
TRENGTH
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
335
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
335
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
335
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
335
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x150)^2+(50+0.5x10)^2)-0.5x10
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
17.23 kN-m
9.33
145 mm
34 mm
150 mm
88.0 mm
33.2 mm
d - d ') = M
7.79 N/mm2
244.8 N/mm2
200 mm
1.83E-03
7.87E-04
1.04E-03
0.190 mm
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x150)^2+(50+0.5x8)^2)-0.5x8
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
4.91 kN-m
9.33
146 mm
35 mm
150 mm
88.4 mm
28.6 mm
d - d ') = M
2.76 N/mm2
105.7 N/mm2
200 mm
7.72E-04
1.25E-03
-4.81E-04
-0.090 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W6
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
6
DOCUMENT NO.
DATE 23.05.2018
Es = 2.00E+05 N/mm2
TOW = 245.260


Provided thickness 200 200 +




DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 2.46 m HOW = 2.46 m

of wall
(m)
2.46
2.46 0.0000 153.3 0.00 0.00
1.84 -0.0026 153.3 -0.40 0.00
1.23 -0.0208 153.3 -3.19 0.00
0.61 -0.0703 153.3 -10.78 0.00
0.00 -0.1667 153.3 -25.56 0.00

ρ = 10.3 kN/m3 HOF = 2.46 m HOW = 2.46 m

of wall
(m)
2.46
2.46 0.0000 153.3 0.00 0.00
1.84 -0.0026 153.3 0.00 -0.40
1.23 -0.0208 153.3 0.00 -3.19
0.61 -0.0703 153.3 0.00 -10.78
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 153.3 0.00 -25.56

DOCUMENT NO.
DATE 23.05.2018

of wall
(m)
2.46
2.46 0 0
1.84 0.4 0.4
1.23 3.19 3.19
0.61 10.78 10.78
0.00 25.56 25.56
Mu = M * 1.5 c' = 50+0.5x10 = 55 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

2.460 200 240 240
2.460 0.00 0.00 200 145 0 240 240
1.845 0.40 0.60 200 145 10 240 240
1.230 3.19 4.79 200 145 77 240 240
0.615 10.78 16.17 200 145 265 240 265
0.000 25.56 38.34 200 145 658 240 658
DOCUMENT NO.
DATE 23.05.2018
bottom M

2.460 200 240 240
2.460 0.00 0.00 200 145 0 240 240
1.845 0.40 0.60 200 145 10 240 240
1.230 3.19 4.79 200 145 77 240 240
0.615 10.78 16.17 200 145 265 240 265
0.000 25.56 38.34 200 145 658 240 658

ρ = 10.3 kN/m3 HOF = 2.46 m HOW = 2.46 m

bottom
(m)
2.46
2.46 0.000 0.000 153.3 0.00 0.00 0.00 0.00
1.84 0.000 0.000 153.3 0.00 0.00 0.00 0.00
1.23 0.000 0.000 153.3 0.00 0.00 0.00 0.00
0.61 0.000 0.000 153.3 0.00 0.00 0.00 0.00
0.00 0.000 0.000 153.3 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018
ρ = 10.3 kN/m3 HOF = 2.46 m HOW = 2.46 m

DOCUMENT NO.
DATE 23.05.2018
bottom
(m)
2.46
2.46 0.000 0.000 153.3 0.00 0.00 0.00 0.00
1.84 0.000 0.000 153.3 0.00 0.00 0.00 0.00
1.23 0.000 0.000 153.3 0.00 0.00 0.00 0.00
0.61 0.000 0.000 153.3 0.00 0.00 0.00 0.00
0.00 0.000 0.000 153.3 0.00 0.00 0.00 0.00

bottom
of wall
(m)
2.46
2.46 0.00 0.00 0.00 0.00
1.84 0.00 0.00 0.00 0.00
1.23 0.00 0.00 0.00 0.00
0.61 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+10+0.5x10 = 65 mm
bottom M
2.46 200 240 240
2.46 0.00 0.00 200 135 0 240 240
DOCUMENT NO.
DATE 23.05.2018
1.84 0.00 0.00 200 135 0 240 240
1.23 0.00 0.00 200 135 0 240 240
0.61 0.00 0.00 200 135 0 240 240
0.00 0.00 0.00 200 135 0 240 240
DOCUMENT NO.
DATE 23.05.2018
c' = 50+10+0.5x10 = 65 mm
bottom M
2.46 200 240 240
2.46 0.00 0.00 200 135 0 240 240
1.84 0.00 0.00 200 135 0 240 240
1.23 0.00 0.00 200 135 0 240 240
0.61 0.00 0.00 200 135 0 240 240
0.00 0.00 0.00 200 135 0 240 240
c' = 50+10+0.5x10 = 65 mm
bottom M

2.46 200 240 240
2.46 0.00 0.00 200 135 0 240 240
1.84 0.00 0.00 200 135 0 240 240
1.23 0.00 0.00 200 135 0 240 240
0.61 0.00 0.00 200 135 0 240 240
0.00 0.00 0.00 200 135 0 240 240
c' = 50+10+0.5x10 = 65 mm
bottom M
DOCUMENT NO.
DATE 23.05.2018
2.46 200 240 240
2.46 0.00 0.00 200 135 0 240 240
1.84 0.00 0.00 200 135 0 240 240
1.23 0.00 0.00 200 135 0 240 240
0.61 0.00 0.00 200 135 0 240 240
0.00 0.00 0.00 200 135 0 240 240

from Reinforcement
bottom
2.46 240 240 00-000+10-160 00-000+10-160 491

2.46 240 240 00-000+10-160 00-000+10-160 491
1.84 240 240 00-000+10-160 00-000+10-160 491
1.23 240 240 00-000+10-160 00-000+10-160 491
0.61 265 265 10-160+10-160 10-160+10-160 982
0.00 658 658 10-160+10-160 10-160+10-160 982
1.20 1.20
Curtail at
Fill 1 / Fill 2 1.20 1.20

bottom

2.46 240 240 240 240
2.46 240 240 240 240
1.84 240 240 240 240
1.23 240 240 240 240
DOCUMENT NO.
DATE 23.05.2018
0.61 240 240 240 240
0.00 240 240 240 240

bottom
2.46 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160

2.46 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160
1.84 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160
1.23 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160
0.61 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160
0.00 00-000+10-160 00-000+10-160 00-000+10-160 00-000+10-160
Break at
Fill 1 / Fill 2

bottom
2.46 491 491 491 491

2.46 491 491 491 491
1.84 491 491 491 491
1.23 491 491 491 491
0.61 491 491 491 491
0.00 491 491 491 491

DOCUMENT NO.
DATE 23.05.2018
Bottom Top
4 0.00 0.00 0.00 0.000 0.000 0.000
3 0.20 0.00 0.00 0.000 0.000 0.000
2 0.20 0.20 2.46 0.492 0.100 0.100
1 0.20 0.20 0.00 0.000 0.000 0.000
Total = 0.492 0.100 0.100
Case 1 25.56
Case 2 25.56
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
245.26-242.8 2.46 m
245.26-242.8 2.46 m
2.46 m
Both Sides
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x2.46^2x2.46 153.3
Liquid
1x10.3x2.46^2x2.46 153.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x2.46^2x2.46 153.3
Liquid
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
1x10.3x2.46^2x2.46 153.3
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
491
491
491
491
982
982
NT
POINT
FILL 2
240
240
240
240
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
240
240
NT
POINT
FILL 2
00-000+10-160
00-000+10-160
00-000+10-160
00-000+10-160
00-000+10-160
00-000+10-160
NT
POINT
FILL 2
491
491
491
491
491
491
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x80)^2+(50+0.5x10)^2)-0.5x10
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
25.56 kN-m
9.33
145 mm
35 mm
80 mm
63.0 mm
41.6 mm
d - d ') = M
8.66 N/mm2
200.8 N/mm2
200 mm
1.54E-03
4.09E-04
1.13E-03
0.183 mm
DOCUMENT NO.
DATE 23.05.2018

Es = 2.00E+05 N/mm2
NGL= 243.00 BOW = 242.800 BOF =

m kN/m3 kN-m/m
Fill 1 Liquid 2.46 10.3 Case 1 25.56

Fill 2 Liquid 2.46 10.3 Case 2 25.56

G1 = 0.100 G2 = 0.100




m mm mm m mm mm
DOCUMENT NO.
DATE 23.05.2018
0.90 200 200 0.90 200 200


0.9-(0.9x1000x(2x200+200)/((3x(200+200)))/1000)
0.9-(0.9x1000x(2x200+200)/((3x(200+200)))/1000)

Gross SBC = 47+(243-242.8+200/1000)x18

length from S
V d V*d
kN/m m kN-m/m

DOCUMENT NO.
DATE 23.05.2018
Weight of Fill 1 on footing 22.80 1.55 -35.34 2-0.45
Self weight of footing on Fill 1 side 4.50 1.55 -6.98 2-0.45
Total vertical load P (kN/m) = (22.8-4.5+4.5+1+12.3)
Net moment (kN-m/m) = ABS((25.56+35.34+6.975-2.025-1-12.3))
Eccentricity = 0.5x2-0.71
Base Pressure at P, kN/m2 = (45.1/2)x(1-(6x0.29/2))
Base Pressure at Q (interpolated) = 2.93+((42.17-2.93)/2)x0.9
Base Pressure at R (interpolated) = 2.93+((42.17-2.93)/2)x(0.9+0.2)
Base Pressure at S, kN/m2 = (45.1/2)x(1+(6x0.29/2))


DOCUMENT NO.
DATE 23.05.2018

along from P from P
length
V d V*d
kN/m m kN-m/m
Weight of Fill 2 on footing 22.80 1.6 35.34 2-0.45
Self weight of footing on Fill 2 side 4.50 1.550 6.98 2-0.45

Total vertical load P (kN/m) = (22.8+4.5+4.5+1+12.3)
Net moment (kN-m/m) = ABS((-25.56-35.34+2.025+6.975+1+12.3))
Distance resultant from S (m) = 2-0.711
Eccentricity = 0.5x2-1.289
Base Pressure at P = (45.1/2)x(1-(6x-0.289/2))
Base Pressure at Q (interpolated) = 42.08+((3.02-42.08)/2)x0.9
Base Pressure at R (interpolated) = 42.08+((3.02-42.08)/2)x(0.9+0.2)
DOCUMENT NO.
DATE 23.05.2018
Base Pressure at S = (45.1/2)x(1+(6x-0.289/2))

along from S from S
length
V d V*d
kN/m m kN-m/m

Weight of Fill 1 on footing 22.80 1.55 -35.34 2-0.45
Self weight of footing on Fill 1 side 4.50 1.55 -6.98 2-0.45

DOCUMENT NO.
DATE 23.05.2018
Total vertical load P (kN/m) = (-22.8+22.8+4.5+4.5+1+12.3)
Net moment (kN-m/m) = ABS((25.56-25.56-35.34-10.26-6.975-2.025-1-
12.3))
Distance resultant from S (m) = 1
Eccentricity = 0
Base Pressure at P = (67.9/2)x1
Base Pressure at Q = 33.95
Base Pressure at R = 33.95+0x(0.9+0.2)
Base Pressure at S = (67.9/2)x1


MOMENT ENVELOPE
Moment at Q (base) = -8.71 12.66 1.47
Moment at R (base) = 12.67 -8.69 1.47

kN-m/m
Bottom 12.66
DOCUMENT NO.
DATE 23.05.2018
kN-m/m
Bottom 12.67

�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
M
Q - Top 8.71 13.07 200 146 211 240 240

Q - Bot 12.66 18.98 200 145 312 240 312
R - Top 8.69 13.03 200 146 210 240 240
R - Bot 12.67 19.00 200 145 313 240 313
Reinf
required
Q - Top 240 00-000+08-150 335
Q - Bot 312 00-000+10-150 524
R - Top 240 00-000+08-150 335
R - Bot 313 00-000+10-150 524

DOCUMENT NO.
DATE 23.05.2018

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
242.800
Overturning moment
kN-m/m
25.56
25.56
7.50
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
0.9+0.9+0.1+0.1 2.00
+200)x0.9x25/1000) 4.50
3x(200+200)))/1000) 0.450
+200)x0.9x25/1000) 4.50
3x(200+200)))/1000) 0.450
2.46x10.3x0.9 22.80
0.5x0.9 0.45
2.46x10.3x0.9 22.80
0.5x0.9 0.45
0.1+0.1 0.20 m
0+200)x0.2x25/1000 1.00
242.8+200/1000)x18 54.2
moments are +ve

Explanation of
from S
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
2-0.45
2-0.45
0.45
0.5x0.2+0.9
0.9+0.1
25.56
57.64
57.64/25.56 2.26
2.8-4.5+4.5+1+12.3) 45.10
6.975-2.025-1-12.3)) 32.08
32.08/45.1 0.710
0.5x2-0.71 0.29
5.1/2)x(1-(6x0.29/2)) 2.93
((42.17-2.93)/2)x0.9 20.59
7-2.93)/2)x(0.9+0.2) 24.51
.1/2)x(1+(6x0.29/2)) 42.17
.5x(2.93+20.59)x0.9 10.58
9))/(3x(2.93+20.59)) 0.34
9-0.45)-22.8x0.5x0.9 -8.71
5x(24.51+42.17)x0.9 30.01
))/(3x(24.51+42.17)) 0.49
x0.49-4.5x(0.9-0.45) 12.67
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
moments are +ve

from P
2-0.45
0.45
2-0.45
0.5x0.2+0.9
0.9+0.1
25.56
57.64
57.64/25.56 2.26
.8+4.5+4.5+1+12.3) 45.10
025+6.975+1+12.3)) 32.08
32.08/45.1 0.71
2-0.711 1.29
0.5x2-1.289 -0.29
1/2)x(1-(6x-0.289/2)) 42.08
((3.02-42.08)/2)x0.9 24.50
-42.08)/2)x(0.9+0.2) 20.60
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
/2)x(1+(6x-0.289/2)) 3.02
.5x(42.08+24.5)x0.9 29.96
5))/(3x(42.08+24.5)) 0.49
x0.49-4.5x(0.9-0.45) 12.66
0.5x(20.6+3.02)x0.9 10.63
0.6))/(3x(20.6+3.02)) 0.34
9-0.45)-22.8x0.5x0.9 -8.69
moments are +ve

from S
2-0.45
0.5x0.9
2-0.45
0.45
0.5x0.2+0.9
0.9+0.1
25.56
93.46
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
3.66
.8+4.5+4.5+1+12.3) 67.90
0.26-6.975-2.025-1- 67.90
12.3))
67.9/67.9 1.00
1 1.00
0 0.00
(67.9/2)x1 33.95
33.95 33.95
33.95+0x(0.9+0.2) 33.95
(67.9/2)x1 33.95
5x(33.95+33.95)x0.9 30.56
))/(3x(33.95+33.95)) 0.45
9-0.45)-22.8x0.5x0.9 1.47
5x(33.95+33.95)x0.9 30.56
))/(3x(33.95+33.95)) 0.45
9-0.45)-22.8x0.5x0.9 1.47
Case 3
1.47
1.47
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
TRENGTH
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
335
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
628
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
942
0+0.5x(200+200))/2 200
N(0.5x200,250)/100 240
942
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x150)^2+(50+0.5x10)^2)-0.5x10
(x - d ') bxf c x
x 2 3
fc (d - x)
x
Stress in Tension reinforcement, fst = 9.33x-3.73x(145+51.7)/-51.7

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
12.67 kN-m
9.33
145 mm
34 mm
150 mm
88.0 mm
-51.7 mm
d - d ') = M
-3.73 N/mm2
132.4 N/mm2
200 mm
8.47E-04
1.02E-03
-1.71E-04
-0.030 mm
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x150)^2+(50+0.5x8)^2)-0.5x8
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
8.71 kN-m
9.33
146 mm
35 mm
150 mm
88.4 mm
28.6 mm
d - d ') = M
4.89 N/mm2
187.3 N/mm2
200 mm
1.37E-03
1.25E-03
1.15E-04
0.020 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF WALL W7
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
7
DOCUMENT NO.
DATE 23.05.2018
Es = 2.00E+05 N/mm2
TOW = 244.550

Height of Wall From BOF (m) = 244.55-243

Height of Wall From BOW (m) = 244.55-243
Provided thickness 150 150




DOCUMENT NO.
DATE 23.05.2018

ρ = 10.3 kN/m3 HOF = 1.55 m HOW = 1.55 m

of wall
(m)
1.55
1.55 0.0000 38.4 0.00 0.00
1.16 -0.0026 38.4 -0.10 0.00
0.78 -0.0208 38.4 -0.80 0.00
0.39 -0.0703 38.4 -2.70 0.00
0.00 -0.1667 38.4 -6.40 0.00

ρ = 18.0 kN/m3 HOF = 0.00 m HOW = 1.55 m
Multiplier = k * r * HOF^2 * HOW = 0

of wall
(m)
1.55
1.55 0.0000 0.0 0.00 0.00
1.16 -0.0026 0.0 0.00 0.00
0.78 -0.0208 0.0 0.00 0.00
0.39 -0.0703 0.0 0.00 0.00
DOCUMENT NO.
DATE 23.05.2018
0.00 -0.1667 0.0 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018

of wall
(m)
1.55
1.55 0 0
1.16 0.1 0
0.78 0.8 0
0.39 2.7 0
0.00 6.40 0
Mu = M * 1.5 c' = 50+0.5x8 = 54 mm
�
0.5 �fck � 1000 �d � � 4.6 �Mu � 106 �
Ast = � ��1 - 1 - �
� fy �� fck �1000 �d 2 �
�
bottom M

1.550 150 180 180
1.550 0.00 0.00 150 96 0 180 180
1.163 0.10 0.15 150 96 4 180 180
0.775 0.80 1.20 150 96 29 180 180
0.388 2.70 4.05 150 96 99 180 180
0.000 6.40 9.60 150 96 240 180 240
DOCUMENT NO.
DATE 23.05.2018
bottom M

1.550 150 180 180
1.550 0.00 0.00 150 116 0 180 180
1.163 0.00 0.00 150 116 0 180 180
0.775 0.00 0.00 150 116 0 180 180
0.388 0.00 0.00 150 116 0 180 180
0.000 0.00 0.00 150 116 0 180 180

ρ = 10.3 kN/m3 HOF = 1.55 m HOW = 1.55 m

bottom
(m)
1.55
1.55 0.000 0.000 38.4 0.00 0.00 0.00 0.00
1.16 0.000 0.000 38.4 0.00 0.00 0.00 0.00
0.78 0.000 0.000 38.4 0.00 0.00 0.00 0.00
0.39 0.000 0.000 38.4 0.00 0.00 0.00 0.00
0.00 0.000 0.000 38.4 0.00 0.00 0.00 0.00

DOCUMENT NO.
DATE 23.05.2018
ρ = 18.0 kN/m3 HOF = 0.00 m HOW = 1.55 m
Multiplier = k * r * HOF^2 * HOW = 0

DOCUMENT NO.
DATE 23.05.2018
bottom
(m)
1.55
1.55 0.000 0.000 0.0 0.00 0.00 0.00 0.00
1.16 0.000 0.000 0.0 0.00 0.00 0.00 0.00
0.78 0.000 0.000 0.0 0.00 0.00 0.00 0.00
0.39 0.000 0.000 0.0 0.00 0.00 0.00 0.00
0.00 0.000 0.000 0.0 0.00 0.00 0.00 0.00

bottom
of wall
(m)
1.55
1.55 0.00 0.00 0.00 0.00
1.16 0.00 0.00 0.00 0.00
0.78 0.00 0.00 0.00 0.00
0.39 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
Mu = M * 1.5 c' = 50+8+0.5x8 = 62 mm
bottom M
1.55 150 180 180
1.55 0.00 0.00 150 88 0 180 180
DOCUMENT NO.
DATE 23.05.2018
1.16 0.00 0.00 150 88 0 180 180
0.78 0.00 0.00 150 88 0 180 180
0.39 0.00 0.00 150 88 0 180 180
0.00 0.00 0.00 150 88 0 180 180
DOCUMENT NO.
DATE 23.05.2018
c' = 50+8+0.5x8 = 62 mm
bottom M
1.55 150 180 180
1.55 0.00 0.00 150 88 0 180 180
1.16 0.00 0.00 150 88 0 180 180
0.78 0.00 0.00 150 88 0 180 180
0.39 0.00 0.00 150 88 0 180 180
0.00 0.00 0.00 150 88 0 180 180
c' = 30+8+0.5x8 = 42 mm
bottom M

1.55 150 180 180
1.55 0.00 0.00 150 108 0 180 180
1.16 0.00 0.00 150 108 0 180 180
0.78 0.00 0.00 150 108 0 180 180
0.39 0.00 0.00 150 108 0 180 180
0.00 0.00 0.00 150 108 0 180 180
c' = 30+8+0.5x8 = 42 mm
bottom M
DOCUMENT NO.
DATE 23.05.2018
1.55 150 180 180
1.55 0.00 0.00 150 108 0 180 180
1.16 0.00 0.00 150 108 0 180 180
0.78 0.00 0.00 150 108 0 180 180
0.39 0.00 0.00 150 108 0 180 180
0.00 0.00 0.00 150 108 0 180 180

from Reinforcement
bottom
1.55 180 180 00-000+08-150 00-000+08-180 335

1.55 180 180 00-000+08-150 00-000+08-180 335
1.16 180 180 00-000+08-150 00-000+08-180 335
0.78 180 180 00-000+08-150 00-000+08-180 335
0.39 180 180 00-000+08-150 00-000+08-180 335
0.00 240 180 00-000+08-150 00-000+08-180 335
Curtail at
Fill 1 / Fill 2

bottom

1.55 180 180 180 180
1.55 180 180 180 180
1.16 180 180 180 180
0.78 180 180 180 180
DOCUMENT NO.
DATE 23.05.2018
0.39 180 180 180 180
0.00 180 180 180 180

bottom
1.55 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180

1.55 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180
1.16 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180
0.78 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180
0.39 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180
0.00 00-000+08-180 00-000+08-180 00-000+08-180 00-000+08-180
Break at
Fill 1 / Fill 2

bottom
1.55 279 279 279 279

1.55 279 279 279 279
1.16 279 279 279 279
0.78 279 279 279 279
0.39 279 279 279 279
0.00 279 279 279 279

DOCUMENT NO.
DATE 23.05.2018
Bottom Top
4 0.00 0.00 0.00 0.000 0.000 0.000
3 0.15 0.00 0.00 0.000 0.000 0.000
2 0.15 0.15 1.56 0.234 0.075 0.075
1 0.15 0.15 0.00 0.000 0.000 0.000
Total = 0.234 0.075 0.075
Case 1 6.4
Case 2 0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
mm
243.000
244.55-243 1.55 m
244.55-243 1.55 m
1.55 m
Both Sides
eight of Fill
eight of Wall
= k * r * HOF^2 * HOW
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x1.55^2x1.55 38.4
Earth
00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
Liquid
1x10.3x1.55^2x1.55 38.4
Earth
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
00
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
UIRED & PROVIDED
Provided Reinf
Fill 2
279
279
279
279
279
279
NT
POINT
FILL 2
180
180
180
180
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
180
180
NT
POINT
FILL 2
00-000+08-180
00-000+08-180
00-000+08-180
00-000+08-180
00-000+08-180
00-000+08-180
NT
POINT
FILL 2
279
279
279
279
279
279
OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
= SQRT((0.5x150)^2+(50+0.5x8)^2)-0.5x8
(x - d ') bxf c x
Asc fsc = (1.5m -1) Asc f c (d - ) + Asc fsc (d - d ') = M
x 2 3
fc (d - x)
x
Stress in Tension reinforcement, fst =0

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
0.00 kN-m
9.33
96 mm
34 mm
150 mm
88.4 mm
23.1 mm
0.00 N/mm2
0.0 N/mm2
150 mm
0.00E+00
1.11E-03
-1.11E-03
-0.183 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF CHANNEL
ON WALL W8
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
EL
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF CHANNEL ON WALL W1D
Length of Channel Wall =
Bottom Level of Channel Wall =

Top Level of Channel Wall =
Grade of Concrete =
Yield Strength of Reinforcement =
Clear Cover =
m=
Height of Channel Wall =
Moment at Bottom of Wall = (0.5x1x1x10.3)x(1/3)
Required Thickness D = = SQRT(1.72x1000/0.3525)
Provide Thickness =
No of Layers of reinforcment
Effective Depth = = 150-45+0.5x8
Min %age of Steel= 0.35 Min Ast on each face =
Reinf required = = MAX(263,(1.72x1000000/(130x0.87x101)))
Provided Reinforcement = 08-150 Ast Provided =
Percentage of Steel Provided = = 335/(1000x101)
Check for Shear

DOCUMENT NO.
DATE 23.05.2018
Designed Shear Force = = 0.5x1x10.3x1
Shear Stress = = 5.15x1000/(1000x101)
k= = 1.3
Permissible shear stress in slabs (IS 456: 2000 Cl B-5.2, Table 23) = k tc =
Check for Shear =
DESIGN OF BASE SLAB

Width of Channel= = 0.9+0.15/2
Height of Fill =
Assumed thickness (mm) =
Self Weight (Dead Load) = = 25x225/1000

Sewage load = = 1x10.3
Total load on the Slab /m2 = = (5.625+10.3)
Point Load at Edge of Slab from top Slab = (25x0.15+5)x0.45
Point Load at Edge of Slab from Wall = = 25x1x150/1000
Toatl Point Load at Edge of Slab = = (3.94+3.75)

Moment at the Bottom = = 1.72
Effective Depth = = 225-45-0.5x12
Design moment (kN-m/m) = 5.925x0.98x0.98/2)+(7.69x0.98)+1.72
Required Thickness D = = SQRT(16.9x1000/0.3525)
Calculation of Main Steel
Reinforcement Required = = MAX(394,(16.9x1000000/(130x0.87x174)))
Percentage of Steel Provided = = 1131/(1000x174)
Calculation of Distribution Steel

DOCUMENT NO.
DATE 23.05.2018
Effective Depth,d=
Reinf Required = MAX(305,(0.007x1000000/(130x0.87x1131)))
Check For Shear
Designed Shear Force = = 15.925x0.98+7.69
Shear Stress = = 23.297x1000/(1000x174)
k= = ((0.3x(225-150)/150)+1.3)
Check for Shear =

CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
29.00 m
247.500 m
248.500 m
30
500
45
9.33
1.00 m
1.72 KN-m/m
70 mm
150 mm
Double
101 mm
263 mm2
263 mm2
335 mm2
0.33%
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
5.15 KN/m
0.05 N/mm2
1.3
0.34
OK
0.98 m
1.00 m
225 mm
5.63 kN/m/m
10.30 kN/m/m
15.93 kN/m/m
3.94 KN/m
3.75 KN/m
7.69 KN/M
1.72 KN-m/m
174 mm
16.90 KN-m/m
219 mm
394 mm2
859 mm2
1131 mm2
0.65%
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
174 mm
305 mm2
305 mm2
335 mm2
23.30 N/mm2
0.13 N/mm2
1.45
0.51
OK
DOCUMENT NO.
DATE
TITLE: SEQUENTIAL BATCH REACTOR REV
Channel CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
Wall Limiting crack width, w
= SQRT((0.5x150)^2+(50+0.5x8)^2)-0.5x8
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
1.72 kN-m
9.33
96 mm
34 mm
150 mm
88.4 mm
23.3 mm
d - d ') = M
1.90 N/mm2
55.3 N/mm2
150 mm
4.82E-04
1.11E-03
-6.23E-04
-0.103 mm
DOCUMENT NO.
DATE
TITLE: SEQUENTIAL BATCH REACTOR REV
Channel CALCULATION OF CRACK WIDTH - FLEXURE (IS 3370 Part 2 - 2009, Annexure B)
Slab Limiting crack width, w
= SQRT((0.5x100)^2+(50+0.5x12)^2)-0.5x12
(x - d ') bxf c x
x 2 3
fc (d - x)
x

OCUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
9, Annexure B)
0.2 mm
30 N/mm2
500 N/mm2
2.7E+04 N/mm2
2.0E+05 N/mm2
16.90 kN-m
9.33
169 mm
34 mm
100 mm
69.1 mm
49.0 mm
d - d ') = M
4.31 N/mm2
98.5 N/mm2
225 mm
7.22E-04
3.81E-04
3.41E-04
0.058 mm
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF SLABS
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
S1 DESIGN OF SUSPENDED SLAB SAS RAS TOP SLAB
Long Span L(y) =
Short Span L(x) =
L(y)/L(x)
Slab to be designed as Simply Supported

Type of slab
Grade Of Concrete
Clear Cover =
Provided Thickness =
Effective Depth 150-0.5x12-45
Self Wt Of Slab 25x150/1000
Dead Load
Water Load
Live Load
Total Load (3.75+5)
Factored Load 8.75x1.5
Load Dist factor along X Kx (0.65^4/(1+0.65^4))
Load Dist factor along Y Ky 1-0.151

DOCUMENT NO.
DATE 23.05.2018
Top Moment 0.151x13.125x3.54x3.54/12

Short Span
Bottom Moment 0.151x13.125x3.54x3.54/8
Top Moment 0.849x13.125x3.54x3.54/12

Long Span
Bottom Moment 0.849x13.125x3.54x3.54/8
Top Mu/bd2 2.073x10^6/1000/99^2

Short Span
Bottom Mu/bd2 3.11x10^6/1000/99^2
Top Mu/bd2 11.633x10^6/1000/99^2

Long Span
Bottom Mu/bd2 17.45x10^6/1000/99^2
Short Span Ast Required at Top
Short Span Ast Required at Bottom
Long Span Ast Required at Top
Long Span Ast Required at Bottom
Provide Top 00-000+08-150

Short Span
Provided Bottom 00-000+08-150
Provide Top 00-000+10-150

Long Span
Provided Bottom 00-000+10-150
Check for Shear
Designed Shear Force = = 0.5x(13.125x(3.54-(99/1000)))
Shear Stress = = (22.582x1000)/(1000x99)

DOCUMENT NO.
DATE 23.05.2018
k= = 1.3
Percentage of Steel Provided = 524/(1000x99)
Check for Shear =
Check for Deflection
Percentage of steel Reuired
Mdification Factor in Tension
Mdification Factor in Compression
l/d Provided = 3.54/(99/1000)
l/d Required
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
2.30 m
3.54 m
0.65
Simply Supported
Two Way
30
500
45
150 mm
99 mm
3.75 KN/m2
5.00 KN/m2
0.00 KN/m2
0.00 KN/m2
8.75 KN/m2
13.13 KN/m2
0.151
0.849
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
2.07 kN-m
3.11 kN-m
11.63 kN-m
17.45 kN-m
0.21
0.32
1.19
1.78
49 mm2
73 mm2
284 mm2
438 mm2
335 mm2
335 mm2
524 mm2
524 mm2
22.58 kN
0.23 N/mm2
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
1.3
0.53%
0.42
OK
0.44%
1.09
35.76
43.60
Ok
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF BEAMS
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
DOCUMENT NO.
DATE 23.05.2018
B2 DESIGN OF BEAM- SAS RAS BEAM
Beam Span =
Width of Beam
Beam to be designed as Simply Supported
Grade of Concrete
Clear Cover =
Self Wt of Beam 300x300x25/1000000
Dead Load of Slab
Live Load on Slab
Total Load (4.75+5)
Total Load/m 9.75x1.65x0.5
Factored Load (2.25+8.04)x1.5
Limiting Moment Mu
Min area of Reinforcement
Hogging Moment Top Moment 15.44x2.3x2.3/12

DOCUMENT NO.
DATE 23.05.2018
Sagging Moment Bottom Moment 15.44x2.3x2.3/8
�0.5 �fck �1000 �d � � 4.6 �Mu �106 �

Ast = � 1- 1-
�� 2 �
� fy �� fck �1000 �d �
�
Reinforcement Required Provided
Hogging Moment 123 mm2 0-00+3-12
Sagging Moment 123 mm2 2-12+1-16
Check for Shear
Designed Shear Force = = 0.5x2.3x15.44
Shear Stress = = 17.756x1000/(300x300)
Percentage of Steel Provided = 0.588
Permissible shear stress in slabs (IS 456: 2000 Cl B-5.2, Table 23) =
Dia of Shear Stirrup
No. of Legs
Stirrup Spacing
Max Spacing
Provided Spacing
Percentage of steel reuired = 123.42/300/242
Percentage of steel provided = 427/300/242
Mdification factor in Tension

DOCUMENT NO.
DATE 23.05.2018
Percentage of comp reinf provided = 339/300/242
Mdification factor in Compression
Span/Eff d Provided = 2.3/(242/1000)
Span/Eff d Required
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
2.30 m
300 mm
Simply Supported
30
500
50
300 mm
242 mm
2.25 kN/m
4.75 KN/m2
5.00 KN/m2
9.75 KN/m2
8.04 kN/m
15.44 kN/m
70.10 kN-m
123 mm2
6.81 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
10.21 kN-m
339 mm2
427 mm2
17.76 kN
0.20 N/mm2
0.59
0.53 N/mm2
8 mm
364 mm
182 mm
150 mm
0.17%
0.59%
2.00
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.47%
1.14
9.50
45.60
OK
DOCUMENT NO.
DATE 23.05.2018
B3 DESIGN OF BEAM ABOVE OPENING IN WALL W4
Beam Span =
Width of Beam
Beam to be designed as Simply Supported
Grade of Concrete
Clear Cover =
Self Wt of Beam 450x300x25/1000000
Dead Load of Slab
Live Load on Slab
Total Load (4.75+5)
Total Load/m 9.75x1x0.5
Factored Load (3.38+4.88)x1.5
Limiting Moment Mu
Min area of Reinforcement
Hogging Moment Top Moment 12.39x4.8x4.8/12

DOCUMENT NO.
DATE 23.05.2018
Sagging Moment Bottom Moment 12.39x4.8x4.8/8
�0.5 �fck �1000 �d � � 4.6 �Mu �106 �

Ast = � 1- 1-
�� 2 �
� fy �� fck �1000 �d �
�
Reinforcement Required Provided
Hogging Moment 143 0-00+3-16
Sagging Moment 217 0-00+3-16
Check for Shear
Designed Shear Force = = 0.5x4.8x12.39
Shear Stress = = 29.736x1000/(300x450)
Percentage of Steel Provided = 603x100/300/390
Permissible shear stress in slabs (IS 456: 2000 Cl B-5.2, Table 23) =
Dia of Shear Stirrup
No. of Legs
Stirrup Spacing
Max Spacing
Provided Spacing
Percentage of steel reuired = 217/300/390
Percentage of steel provided = 603/300/390
Mdification factor in Tension

DOCUMENT NO.
DATE 23.05.2018
Percentage of comp reinf provided = 603/300/390
Mdification factor in Compression
Span/Eff d Provided = 4.8/(390/1000)
Span/Eff d Required
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
4.80 m
300 mm
Simply Supported
30
500
50
450 mm
390 mm
3.38 kN/m
4.75 KN/m2
5.00 KN/m2
9.75 KN/m2
4.88 kN/m
12.39 kN/m
182.06 kN-m
199 mm2
23.79 kN-m
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
35.68 kN-m
603 mm2
603 mm2
29.74 kN
0.22 N/mm2
0.52
0.50 N/mm2
8 mm
364 mm
293 mm
200 mm
0.19%
0.52%
2.00
CUMENT NO.
RNAL20-SBR-DC-02
23.05.2018
R0
0.52%
1.15
12.31
46.00
OK
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF BRACKETS
SUPPORTING PIPE
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
TS
DOCUMENT NO.
DATE 23.05.2018
BR1 DESIGN OF BRACKET FOR PIPE SUPPORT
Grade of Concrete, fck = 30 N/mm2 Grade of Steel, fy = 500 N/mm2
Clear Cover 40 mm
C/C Length of Pipe B/W Supports =
Dia of Pipe-1 = 250 mm Thickness of Pipe-1 = 23 mm
Weight of Pipe-1 per RM = 3.14x(250+23)/1000x23/1000x7856x10/1000
Weight of Liquid-1 per RM = 0.7854x(250/1000)^2x10.3
Concentrated Load-1 on the support = 3x(0.51+1.55)
Dia of Pipe-2 = Thickness of Pipe-2 =
Weight of Pipe-2 per RM = 0
Weight of Liquid-2 per RM = 0
Concentrated Load-2 on the support = 0
Total Concentrated Load = +6.18
Distance of concentrated load from support =

Taken as average in case of two loads
Width / Depth of support = 0.30 0.45 m
Self wt of support per RM = 0.3x0.45x25
DESIGN OF BRACKET
Cantilever length =
Factored Bending Moment = 1.5x((3.38x1.3^2)/2+6.18x0.8)

Factored Shear Force= 1.5x(3.38x1.3+6.18)
Effective Depth = 0.45x1000-40-0.5x12
�0.5 �fck �1000 �d � � 4.6 �Mu �106 �

Ast = � 1- 1-
�� 2�
� fy �� fck �1000 �d �
�
DOCUMENT NO.
�0.5 �DESIGN
STRUCTURAL �d � �
fck �1000CALCULATION 4.6 �Mu �10 6 � DATE 23.05.2018
TITLE: Ast = � BATCH
SEQUENTIAL REACTOR
1 - 1 - OF
��
fy 2
fck �1000 �d � REV R0
� ��
� �
Ast Required =
Provided Reinforcement = 0-00 + 3-12 Ast Provided =
Shear stress tv = 15.9x1000/(0.3x1000x404)

Percentage of Reinforcement Provided =
Permissible shear stress in slabs = k tc =

Max shear stress tc max =
ENT NO.
20-SBR-DC-02
23.05.2018
R0
3.00 m
1.55 kN/m
0.51 kN/m
6.18 kN
0.00 kN/m
0.00 kN/m
0.00 kN
6.18 kN
0.80 m
3.38 kN/m
1.30 m
11.7 KN-m
15.9 KN
404 mm
ENT NO.
20-SBR-DC-02
23.05.2018
R0
224 mm2
339 mm2
0.13 N/mm2
0.28%
0.39 N/mm2
3.50 N/mm2
DOCUMENT NO.
DATE 23.05.2018
Clear Cover 40 mm
Weight of Liquid-1 per RM = 0.7854x(300/1000)^2x10.3
Concentrated Load-1 on the support = 3x(0.73+2)

DESIGN OF BRACKET
Cantilever length =

Factored Shear Force= 1.5x(3.38x1.15)+8.19
�0.5 �fck �1000 �d � � 4.6 �Mu �106 �

Ast = � 1- 1-
�� 2�
� fy �� fck �1000 �d �
�
DOCUMENT NO.
�0.5 �DESIGN
SEQUENTIAL REACTOR
1 - 1 - OF
��
fy 2
fck �1000 �d � REV R0
� ��
� �
Ast Required =
Shear stress tv = 14x1000/(0.3x1000x404)


ENT NO.
20-SBR-DC-02
23.05.2018
R0
3.00 m
2.00 kN/m
0.73 kN/m
8.19 kN
0.00 kN/m
0.00 kN/m
0.00 kN
8.19 kN
0.65 m
3.38 kN/m
1.15 m
11.3 KN-m
14.0 KN
404 mm
ENT NO.
20-SBR-DC-02
23.05.2018
R0
216 mm2
339 mm2
0.12 N/mm2
0.28%
0.39 N/mm2
3.50 N/mm2
DOCUMENT NO.
DATE 23.05.2018
Clear Cover 40 mm
Concentrated Load-1 on the support = 2.5x5x1

DESIGN OF BRACKET
Cantilever length =

Factored Shear Force= 1.5x(3.38x0.9)+12.5
�0.5 �fck �1000 �d � � 4.6 �Mu �106 �

Ast = � 1- 1-
�� 2�
� fy �� fck �1000 �d �
�
DOCUMENT NO.
�0.5 �DESIGN
SEQUENTIAL REACTOR
1 - 1 - OF
��
fy 2
fck �1000 �d � REV R0
� ��
� �
Ast Required =
Shear stress tv = 17.1x1000/(0.3x1000x404)


ENT NO.
20-SBR-DC-02
23.05.2018
R0
5.00 m
1.00 kN/m
0.00 kN/m
12.50 kN
0.00 kN/m
0.00 kN/m
0.00 kN
12.50 kN
0.45 m
3.38 kN/m
0.90 m
10.5 KN-m
17.1 KN
404 mm
ENT NO.
20-SBR-DC-02
23.05.2018
R0
201 mm2
339 mm2
0.14 N/mm2
0.28%
0.39 N/mm2
3.50 N/mm2
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF STAIRCASE
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
SE
DOCUMENT NO.
DATE 23.05.2018
SC1 DESIGN OF STAIR CASE (PUMP HOUSE)
Limiting Moment of Resistance Index = 0.133
Clear Cover ###
Geometry of Stair Case
Landing 1=
Going =
Landing 2 =
Span of Stair Case =
Type of Support = Simply Supp
Riser =
Tread =
Assume Thickness of Waist Slab =
Inclined Length of Each Step =
Loads acting on Waist Slab
Dead load due to self wt of slab, kN/m2 = 150/1000x25x(306.12/250)
Dead load due to floor finish if any, kN/m2 = (0.04+0.012)x25
Dead load due to weight of steps, kN/m2 = (1/2)x(176.66/1000)x25
Total Dead Load Acting on Slab, kN/m2 = (4.59+1.3+2.21)
Live load on slab kN/m2 =
Total Load Acting on Slab, kN/m2 = (8.1+5)
Total Factored Load, kN/m2 = 13.1x1.5
Loads acting on Landing
Dead load due to self wt of slab, kN/m2 = 150/1000x25
Dead load due to floor finish if any, kN/m2 = (0.04+0.012)x25

DOCUMENT NO.
DATE 23.05.2018
Total Dead Load Acting on Slab, kN/m2 = (3.75+1.3)
Live load on slab kN/m2 =
Total Load Acting on Slab, kN/m2 = (5.05+5)
Total Factored Load, kN/m2 = 10.05x1.5

DOCUMENT NO.
DATE 23.05.2018
19.65
0 0
a L1 = 0 m L2 = 3.8 m L3 = 0 m b
Ra Rb
Reactions Ra and Rb
Taking moments of all forces about B
Ra x 3.8 = +19.65x3.8x(3.8x0.5)
Ra = 141.87/3.8
Reaction at b = (+19.65x3.8)-37.33
Maximum BM Occurs at the point 'x' where SF is Zero or Changes its sign.
Point of Maximum Moment =
Maximum BM, kN-m = 37.33x1.9-19.65x0.5x1.9^2
Maximum Shear Force, kN =
Area of Steel Required on the Waist Slab
Effective Depth = 150-25-0.5x12

Mu/bd2 = 35.459x10^6/1000/119^2
Ast Required =
Distribution Steel
Pt Min = 0.12% Ast Provided = 08-200

Pt Provided = 251/(1000x119)
DOCUMENT NO.
DATE 23.05.2018
Check for Shear
Shear stress (N/mm2) = 37.34x1000/(1000x119)

% of Reinforcement Provided = 905x100/(1000x119)
Ref IS 456- Max shear stress (N/mm2) =
2000
Permissible shear stress in slabs = tc =
Check for Shear
Effective thickness z (mm) = 76.66/(SQRT(250x250+176.66x176.66))

Th for control of deflection (mm) D + 0.5*z =
Eff Depth (mm) d = 222-25-0.5x12

% of Reinforcement Required = 768x100/(1000x191)
% of Reinforcement Provided = 905x100/(1000x191)
Modification factor for tension reinforcement =
Span / effective depth ratio provided = 3.8x1000/191

Basic value span/effective depth ratio =
Modified value span/effective depth ratio = 20x1.23

Check For Deflection =
SB1 DESIGN OF STAIR CASE BEAM
Span of Beam =
Width of Beam =
Depth of Beam =
Load on the Beam =
Effective Depth = 450-25-(12/2)
Bending Moment = (37.34x(1.35^2))/2
Mu/bd2 = 34x10^6/300/419^2
DOCUMENT NO.
DATE 23.05.2018
Ast Required =

T NO.
SBR-DC-02
23.05.2018
R0
0.00 m
3.80 m
0.00 m
3.80 m
Simply Supported
177 mm
250 mm
150 mm
306 mm
4.59
1.3
2.21
8.1
13.1
19.65
3.75
1.3
T NO.
SBR-DC-02
23.05.2018
R0
5.05
10.05
15.08
T NO.
SBR-DC-02
23.05.2018
R0
141.87
37.33 KN/m
37.34 KN/m
1.90 m
35.46
37.34 KN
119 mm
2.504
768 mm2
905 mm2
251 mm2
0.21%
T NO.
SBR-DC-02
23.05.2018
R0
0.314
0.761 %
3.50
0.59
OK
144 mm
222 mm
191 mm
0.402 %
0.474 %
1.23
19.90
20.00
24.60
OK
1.35 m
300 mm
450 mm
37.34 KN/m
419 mm
34.0 KN-m
0.646
T NO.
SBR-DC-02
23.05.2018
R0
188 mm2
427 mm2
DOCUMENT NO.
DATE 23.05.2018
DESIGN OF COLUMNS
UMENT NO.
AL20-SBR-DC-02
23.05.2018
R0
NS
DOCUMENT NO.
DATE 23.05.2018
C2 DESIGN OF COLUMN RAS / SAS Area

Es = 2.00E+05 N/mm2
Clear Cover = 40 mm
Ht of Column (m) = 2.90

b (mm) = 300 D (mm) = 300
Eff Height (m) = 3.48
d' (mm) = 56 d'/D = 0.20
Factored Vertical Load on Column (kN), Pu =
Factored Moment on Column (kN-m), Mu =
Additional moments for Long Column (kN-m) =
Total moments (kN-m) =
Pu/(fck * b *D) 17.76x1000/30/300/300
Mu/(fck * b *D^2) 6.806x10^6/30/300/300^2
Refer Chart 50 of SP-16, p/fck = 0.02
Percentage of reinforcement = 0.02x30
Required reinforcemment (sqmm) = 0.6x300x300/100
Provided Reinforcment (sqmm) = 4x201+4x113

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
17.76
6.81
0.00
6.81
76x1000/30/300/300 0.0066
x10^6/30/300/300^2 0.0084
0.02x30 0.6
0.6x300x300/100 540
4x201+4x113 1256
DOCUMENT NO.
DATE 23.05.2018
C3 DESIGN OF COLUMN Staircase ST-01

Es = 2.00E+05 N/mm2
Clear Cover = 40 mm
Ht of Column (m) = 6.20

b (mm) = 450 D (mm) = 300
Eff Height (m) = 7.44
d' (mm) = 56 d'/D = 0.20
Factored Vertical Load on Column (kN), Pu (Refer Stair Case Beam Design)=
Factored Moment on Column (kN-m), Mu (Refer Stair Case Beam Design)=
Additional moments for Long Column (kN-m) =
89.62x300x(7.44x1000)^2/2000/300^2/1000
Total moments (kN-m) =
Pu/(fck * b *D) 89.62x1000/30/450/300
Mu/(fck * b *D^2) 42.268x10^6/30/450/300^2
Refer Chart 50 of SP-16, p/fck = 0.02
Percentage of reinforcement = 0.02x30
Required reinforcemment (sqmm) = 0.6x450x300/100
Provided Reinforcment (sqmm) = 4x201+4x113

OCUMENT NO.
ARNAL20-SBR-DC-02
23.05.2018
R0
N/mm2
89.62
34.00
2000/300^2/1000 8.27
42.27
62x1000/30/450/300 0.0221
x10^6/30/450/300^2 0.0348
0.02x30 0.6
0.6x450x300/100 810
4x201+4x113 1256
DOCUMENT NO.
DATE 18.05.2018
SOIL REPORT
RECCOMENDATIONS
UMENT NO.
AL20-SBR-DC-04
18.05.2018
R0

Karnal SBR 20 MLD - R0!23!05-18 - Client

Uploaded by

Copyright:

Available Formats

Karnal SBR 20 MLD - R0!23!05-18 - Client

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Karnal SBR 20 MLD - R0!23!05-18 - Client

Uploaded by

Copyright:

Available Formats

23.05.

2018 R0 For Approval KA

M/S. TATA PROJECTS LIMITED

MUNCIPAL CORPORATION, KARNAL

20 MLD SEWAGE TREATMENT PLANT BASED ON SBR TECHNOLOGY AT KARNAL

F SEQUENTIAL BATCH REACTOR

2 HYDRODYNAMIC CALCULATIONS FOR SBR BASIN 5

3 DESIGN OF WALL W1 AND FOOTING 24

4 DESIGN OF WALL W1A AND DECANTER FOOTING 44

5 DESIGN OF WALL W1D AND FOOTING 72

6 DESIGN OF WALL W2 AND FOOTING 89

7 DESIGN OF WALL W3 AND FOOTING 109

8 DESIGN OF WALL W4 AND FOOTING 125

9 DESIGN OF WALL W6 AND FOOTING 143

10 DESIGN OF WALL W7 161

11 DESIGN OF CHANNEL ON WALL W1D 171

12 DESIGN OF SLABS 176

13 DESIGN OF BEAMS 179

14 DESIGN OF BRACKETS SUPPORTING PIPE 184

15 DESIGN OF STAIRCASE 188

16 DESIGN OF COLUMNS 192

17 SOIL REPORT RECOMMENDATIONS 195

SCOPE OF DESIGN REPORT

DESIGN CODES & REFERENCES

SP : 16 Design Aids for Reinforced Concrete

IS : 1893 - 2014 Criteria for Earthquake Resistant Design of Structures

Characteristic cube strength of Concrete, fck

Yield Strength of Steel, fy

Limiting Crack Width, w

Limiting moment of resistance index, Mu/(fck*b*d^2)

Unit Weight of Liquid, rw

Unit Weight of Soil, rs

Coefficient of lateral pressure due to soil, k

Clear Cover on Water Face

Clear Cover Footing Base Slab

Clear Cover for Waist Slab of Staircase

Natural Ground Level (NGL) =

Formation Ground Level (FGL) =

Depth of Footing below NGL =

Net Safe Bearing Capacity at 1.1 m from NGL

Gross Bearing Capacity at 1.1 m from NGL 84.6+18x1.1

Net Safe Bearing Capacity at 0.5 m from NGL

Gross Bearing Capacity at 0.5 m from NGL 56+18x0.5

Grade Slab is resting at a depth of 0.5 m below NGL.

Weight of water = 5x10

SW of Grade Slab = 25x0.2

Weight of PCC = 24x0.1

TOTAL LOAD = 50+5+2.4

HYDRODYNAMIC LOADS FOR 29.0 M WALL

Unit weight of Liquid

Acceleration due to gravity

Dimenson of Tank in XX Direction =

Dimenson of Tank in YY Direction =

Average Thickness of Wall

Average Thickness of Raft tb

Thickness of Top Cover Slab =

Area of Base (29+(0.5x2)+2)x(57+(0.5x2)+2)

a) Weight of Tank Walls 2x((29+0.5)+(57+0.5))x5.5x0.5x25

Limiting moment of resistance index, Mu/(fckbd^2)

Modulus of Elasticity of concrete, E 5000SQRT3010^3