RSGV-AS

RESILIENT SEATED GATE VALVE

Quality APPROVED TO AS2638.2
ISO 9001

APPROVED
AS/NZS 2638.2

page 1
AS/NZS 4158 (Epoxy Resin Powder)
AS/NZS 4087
AS/NZS 2280
AS1646 EPDM rubber
WSAA (Water Service Association of Australia)
Certified to AS 4020

FEATURES TECHNICAL DATA

• All models fully conform and approved to AS2638.2. Size Range: DN50 - DN600 (Flanged)
• 316 stainless steel fasteners for corrosion protection. DN100 - DN400 (Socket)
• Stem nut seperate from gate to avoid seizing. DN100 - DN150 (Socket & Flange)
• Low torque, well below AS2638.2 requirements. Allowable Working Pressure: 16Bar
• Flanged, socket and socket/ flange available.
Seal Test to AS2638.2: 16Bar
Body Test to AS2638.2 24Bar
OPTIONS
Maximum Temperature: 80˚C
• Hand Wheel, Key Cap or Gearbox operation available.
• ISO flanging for actuation Operating Direction: Clockwise & Anti-Clockwise Close
• Valve spindle extension Flange Standard: AS4087 CL16
• AS2129 T/E, ISO, EN1092-2, ANSI flanged drilling.
Socket Standard: AS/NZS 2280
• Extensions

FACTORY ACCREDITED:

AS2638.2 ISO 9001

Designs, materials and specifications shown are subject to change

without notice due to our continuing program of product development.
RSGV-AS_V4_20120806.
All content is protected by Copyright and is owned and/or licensed by
AVFI Pty Ltd: 54 Enterprise Drive, Bundoora, Victoria, Australia 3083
AVFI Pty Ltd. Copyright© AVFI Pty Ltd. T: 03 8467 0000 F: 03 8467 0099 E: avfi@avfi.com.au www.avfi.com.au
 RSGV-AS
RESILIENT SEATED GATE VALVE
APPROVED TO AS2638.2 Quality
ISO 9001

MATERIAL SPECIFICATIONS & PARTS LIST

NO. DESCRIPTION MATERIAL NO. DESCRIPTION MATERIAL

1 Body Ductile Iron (AS1831) & Epoxy Resin Powder 10 Seal Ring Synthetic Elastomer (NBR)
(AS/NZS 4020 Approved)
2 Wedge Ductile Iron (AS1831) & Synthetic Elastomer 11 O-Ring Synthetic Elastomer (NBR)
(EPDM Encapsulated)
3 Stem Nut Aluminium Bronze (C95210) (AS1565) 12 Bush Acetal (POM)

4 Stem 431 Stainless Steel 13 Spindle Seal Retainer Ductile Iron (AS1831) & Epoxy Resin Powder
(AS/NZS 4020 Approved)
5 Seal Gasket Synthetic Elastomer (EPDM) 14 Dust Seal Synthetic Elastomer (EPDM)

6 Bonnet Ductile Iron (AS1831) & Epoxy Resin Powder 15 Connecting Bolt 316 Stainless Steel
(AS/NZS 4020 Approved)
8 Washer Acetal (POM) 16 Stem Operating Cap or Ductile Iron (AS1831)
Hand Wheel (Optional) Ductile Iron (AS1831)
9 Thrust Collar Aluminium Bronze (C95210) 17 Socket End Sealing Synthetic Elastomer (EPDM)
(Refer to figure 4 & 5)

Figure 1. Double Flanged

SECTION A - A A

16

13

10
page 2

6
15
5
h1

3
DN

FxF A

Figure 2. Packing detail Figure 3. ISO flange for actuation

(optional on 50-400mm)
14
ØM
ØM1
12
ØM3
11
l2

9
l1

Designs, materials and specifications shown are subject to change

without notice due to our continuing program of product development.
RSGV-AS_V4_20120806.
AVFI Pty Ltd: 54 Enterprise Drive, Bundoora, Victoria, Australia 3083 All content is protected by Copyright and is owned and/or licensed by
T: 03 8467 0000 F: 03 8467 0099 E: avfi@avfi.com.au www.avfi.com.au AVFI Pty Ltd. Copyright© AVFI Pty Ltd.
 RSGV-AS
RESILIENT SEATED GATE VALVE
Quality APPROVED TO AS2638.2
ISO 9001

DIMENSIONS (MM)

DOUBLE FLANGE TO AS4087 CL16 ISO FLANGE FOR ACTUATION

DN FxF h1 (max) Weight (Kg) l1 l2 ØM ØM1 ØM3 Closure Turns Torque (n.m.)
50 178 221 12 — — — — — — —
65 190 242 15 — — — — — — —
80 203 310 22 40 6 125 102 22 22 75
100 229 340 24 40 6 125 102 22 22 80
125 254 380 46 — — — — — — —
150 267 450 53 50 8 175 140 28 32 120
200 292 580 90 50 8 175 140 28 35 160
225 305 670 130 — — — — — 43 210
250 330 670 134 55 10 175 140 32 43 210
300 356 780 180 55 10 175 140 32 45 260
375 381 925 278 70 12 175 140 40 52 360
400 406 1030 297 70 12 175 140 40 52 400
450 432 1120 420 75 14 210 165 50 58 480
500 457 1181 550 75 14 210 165 50 64 600
600 508 1360 690 75 14 210 165 50 68 700

Note: Double Flange DN 50,65 &125 are not covered in AS2638.2

Figure 4. Double socket ends. Figure 5. Socket & flange end.

SECTION A - A A SECTION A - A A

page 3
CLOSE
CLOSE
h1
h1

17 17
DN
DN

h2

h2

A
l3 l3 l4 A

Fx F FxF

DIMENSIONS (MM)

DOUBLE SOCKET ENDS DOUBLE SOCKET ENDS SOCKET & FLANGE END
SOCKET & FLANGE END TO AS/NZ 2280

DN Outside diameter Weight FxF h1 h2 l3 FxF h1 h2 l3 l4

ductile Iron pipe (Kg) (max) (max)
100 122 +
_1
2 25.5 410 340 87 135 319.5 340 108 135 114.5
150 177 +
_1
2 54.2 463 450 117 150 365 450 140 150 133.5
200 232 +
_1
2 105.6 556 580 150 170 — — — — —
225 259 +
_1
2 128.8 477 670 170 135 — — — — —
286 +
_ 1
250 2 132 482 670 185 135 — — — — —
300 345 +
_1
2 165 520 780 216 146 — — — — —

Designs, materials and specifications shown are subject to change

without notice due to our continuing program of product development.
RSGV-AS_V4_20120806.
All content is protected by Copyright and is owned and/or licensed by
AVFI Pty Ltd: 54 Enterprise Drive, Bundoora, Victoria, Australia 3083
AVFI Pty Ltd. Copyright© AVFI Pty Ltd. T: 03 8467 0000 F: 03 8467 0099 E: avfi@avfi.com.au www.avfi.com.au