Equalizing Beams With Rotating Bar

Pin End Bushing

Introducing . . .
Genuine Hendrickson Equalizing Beams
with Hendrickson’s Patented
Rotatable Bar Pin End Bushing!
Hendrickson supplements their Genuine Parts portfolio with the addition of the renowned Hendrickson Equalizing
Beam complete with the innovated patented Rotating Bar Pin End Bushing for quick and easy installation. With the
Hendrickson Equalizing Beam and Rotating Bar Pin End Bushing combination you’ll never fight axle pinion angles
again when replacing select HAULMAAX®, HN® and R Series equalizing beams.

Hendrickson is committed to improving vehicle uptime. By providing service beams with

the patented rotating bar pin end bushing, improved uptime is achieved. No special tools
are required; a standard shop wrench will rotate the bar pin to match the vehicle’s pinion
angle. Creating a perfect installation the first time . . . every time.

Maintain the vehicles original handling, stability, ride and payload characteristics while improving
vehicle uptime by using Hendrickson genuine equalizing beams with rotating bar pin end bushings.

HAULMAAX®

HN®

R™ Series

To learn more call 855.743.3733

or visit www.hendrickson-intl.com
 Equalizing Beams and Rotating Bar Pin End Bushing Features and Benefits
Fabricated Equalizing Beams
FEATURES BENEFITS
Provides the structural integrity and functionality to maintain
original system performance.
The exact equalizing beam used in production.
Designed, tested and validated to strict Hendrickson and OEM
specifications and standards.
Hendrickson equalizing beams are made of a high Enables long component service life and a lightweight design
strength steel formula exclusive to Hendrickson. for greater payloads.
Hendrickson utilizes proprietary manufacturing and Increases fatigue life which equates to longer service life of the
material preparation processes. equalizing beam.
Delivers consistent and accurate weld penetration further leading
The equalizing beam is 100 percent robotically welded.
to improved service life and peace of mind.

Rotating Bar Pin End Bushing*

FEATURES BENEFITS
Easy alignment to axle bracket pinion angles for quick installation.
Bar pin rotates. The bushing is never pushed in at the incorrect angle, driving
down “re-do’s” and scrap levels.
Longer component life – bar pin will not move back and forth
Bar pin locks into place once under load –
in the bushing creating inner bushing wear and stress on the
patented feature.
axle bracket.
Longer life bushing to reduce cost of ownership. Absorbs
Proprietary rubber material and bonding composition.
horizontal, vertical and torsional roll forces.
Hendrickson quality seals. Keeps harmful contaminants out to ensure longer bushing life.
The bar pin accommodates shims that are part of the bushing kit
Shim-able bar pin. that allow up to +/- 3/16"axle alignment. This enables longer
component and tire life.
* Rotating bar pin end bushings can be sold separately - P.N. 34013-188L

Equalizing Beam Part Numbers

Production Part Numbers Replace With NEW Service Part Numbers Description**
64846-001 080225-001 HMX460 54" Beam Assembly w/Shock Bracket
64847-001 and 4 080226-001 HMX460 54" Beam Assembly w/o Shock Bracket
58494-002 080227-002 HN462 54" Beam Assembly
57889-008 080228-008 HN402 52" Beam Assembly
(RT, RS, R suspensions _
50501-015 080476-015 R463 52" Beam Assembly bronze ctr. bush.)
(RT, RS, R suspensions _
50501-017 080476-017 R463 54" Beam Assembly bronze ctr. bush.)

** Beam lengths are determined by measuring the distance from the spindle center of the front drive axle to the spindle center of the rear drive axle.

Call Hendrickson at 630.910.2800 or 855.RIDERED (743.3733) for additional information.

TRUCK COMMERCIAL VEHICLE SYSTEMS

800 South Frontage Road
Woodridge, IL 60517-4904 USA
855.RIDERED (743.3733)
www.hendrickson-intl.com 630.910.2800 • Fax 630.910.2899

45745-465 Rev A 12-17

Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected. © 2017 Hendrickson USA, L.L.C. All Rights Reserved Printed in United States of America