Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 198 views

    Thrust Block Calculation For ф (90 DEGREE)

    Uploaded by

    albertoooooo
    The document contains calculations for determining the required area of thrust blocks for pipes with different diameters (75mm, 110mm, 160mm) bent at 90 degrees. It describes the formula used to calculate the area of the thrust block based on parameters like working pressure, pipe area, angle of bend, and allowable bearing pressure. Sample calculations are shown for each pipe diameter. The last section combines the calculations for a 160mm and two 110mm pipes bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Thrust Block Calculation For ф (90 DEGREE)

    Uploaded by

    albertoooooo
    198 views5 pages
    The document contains calculations for determining the required area of thrust blocks for pipes with different diameters (75mm, 110mm, 160mm) bent at 90 degrees. It describes the formula used to calculate the area of the thrust block based on parameters like working pressure, pipe area, angle of bend, and allowable bearing pressure. Sample calculations are shown for each pipe diameter. The last section combines the calculations for a 160mm and two 110mm pipes bent at 90 degrees.

    Original Description:

    Thrust block check

    Original Title

    Thrust block check

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains calculations for determining the required area of thrust blocks for pipes with different diameters (75mm, 110mm, 160mm) bent at 90 degrees. It describes the formula used to calculate the area of the thrust block based on parameters like working pressure, pipe area, angle of bend, and allowable bearing pressure. Sample calculations are shown for each pipe diameter. The last section combines the calculations for a 160mm and two 110mm pipes bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    198 views5 pages

    Thrust Block Calculation For ф (90 DEGREE)

    Uploaded by

    albertoooooo
    The document contains calculations for determining the required area of thrust blocks for pipes with different diameters (75mm, 110mm, 160mm) bent at 90 degrees. It describes the formula used to calculate the area of the thrust block based on parameters like working pressure, pipe area, angle of bend, and allowable bearing pressure. Sample calculations are shown for each pipe diameter. The last section combines the calculations for a 160mm and two 110mm pipes bent at 90 degrees.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 5

    THRUST BLOCK CALCULATION FOR

    160 + 2x110 mm ф (90 DEGREE)


    (NEGLECTING THE FRICTION FORCES RESISTANCE)

    AREA OF THRUST BLOCK

    Where;

    A AREA OF THRUST BLOCK (sq.m)


    P WORKING PRESSURE (bar)
    a Area of pipe (m2)
    ϴ Angle of pipe bent(degrees)
    q allowable bearing pressure (KN/m2)

    inputs:
    Working Pressure P KN/m2
    Angle of pipe bent ϴ degrees
    area of 160 mm dia pipe a m2
    allowable bearing pressure q 98.1 KN/m2
    Thrust force T (2PaSin(ϴ/2)) 70 KN

    AREA OF THRUST BLOCK REQUIRED ( T/q) 0.7135575943 m2


    AREA OF THRUST BLOCK TO BE USED 1 M2

    NOTE : 1- Thrust block weight and soil friction are considered to be null wich is safer
    2-Thrust block must totally backfilled
    THRUST BLOCK CALCULATION FOR
    110 mm ф PIPE (90 DEGREE)
    (NEGLECTING THE FRICTION FORCES RESISTANCE)

    AREA OF THRUST BLOCK

    Where;

    A AREA OF THRUST BLOCK (sq.m)


    P WORKING PRESSURE (bar)
    a Area of pipe (m2)
    ϴ Angle of pipe bent(degrees)
    q allowable bearing pressure (KN/m2)

    inputs:
    Working Pressure P 1650 KN/m2
    Angle of pipe bent ϴ 90 degrees
    area of 110 mm dia pipe a 0.0095 m2
    allowable bearing pressure q 98.1 KN/m2
    Thrust force T (2PaSin(ϴ/2)) 22.1677975902 KN

    AREA OF THRUST BLOCK REQUIRED ( T/q) 0.2259714331 m2


    AREA OF THRUST BLOCK TO BE USED 0.36 M2

    NOTE : 1- Thrust block weight and soil friction are considered to be null wich is safer
    2-Thrust block must totally backfilled
    THRUST BLOCK CALCULATION FOR
    75 mm ф PIPE (90 DEGREE)
    (NEGLECTING THE FRICTION FORCES RESISTANCE)

    AREA OF THRUST BLOCK

    Where;

    A AREA OF THRUST BLOCK (sq.m)


    P WORKING PRESSURE (bar)
    a Area of pipe (m2)
    ϴ Angle of pipe bent(degrees)
    q allowable bearing pressure (KN/m2)

    inputs:
    Working Pressure P 1650 KN/m2
    Angle of pipe bent ϴ 90 degrees
    area of 75 mm dia pipe a 0.004417 m2
    allowable bearing pressure q 98.1 KN/m2
    Thrust force T (2PaSin(ϴ/2)) 10.3068591533 KN

    AREA OF THRUST BLOCK REQUIRED ( T/q) 0.1050648232 m2


    AREA OF THRUST BLOCK TO BE USED 0.16 M2

    NOTE : 1- Thrust block weight and soil friction are considered to be null wich is safer
    2-Thrust block must totally backfilled
    THRUST BLOCK CALCULATION FOR
    160 mm ф (90 DEGREE)
    (NEGLECTING THE FRICTION FORCES RESISTANCE)

    AREA OF THRUST BLOCK

    Where;

    A AREA OF THRUST BLOCK (sq.m)


    P WORKING PRESSURE (bar)
    a Area of pipe (m2)
    ϴ Angle of pipe bent(degrees)
    q allowable bearing pressure (KN/m2)

    inputs:
    Working Pressure P 1650 KN/m2
    Angle of pipe bent ϴ 90 degrees
    area of 160 mm dia pipe a 0.0201 m2
    allowable bearing pressure q 98.1 KN/m2
    Thrust force T (2PaSin(ϴ/2)) 46.9023927961 KN

    AREA OF THRUST BLOCK REQUIRED ( T/q) 0.4781079796 m2


    AREA OF THRUST BLOCK TO BE USED 0.7225 M2

    NOTE : 1- Thrust block weight and soil friction are considered to be null wich is safer
    2-Thrust block must totally backfilled
    THRUST BLOCK CALCULATION FOR
    160 + 2x110 mm ф (90 DEGREE)
    (NEGLECTING THE FRICTION FORCES RESISTANCE)

    AREA OF THRUST BLOCK

    Where;

    A AREA OF THRUST BLOCK (sq.m)


    P WORKING PRESSURE (bar)
    a Area of pipe (m2)
    ϴ Angle of pipe bent(degrees)
    q allowable bearing pressure (KN/m2)

    inputs:
    Working Pressure P KN/m2
    Angle of pipe bent ϴ degrees
    area of 160 mm dia pipe a m2
    allowable bearing pressure q 98.1 KN/m2
    Thrust force T (2PaSin(ϴ/2)) 92 KN

    AREA OF THRUST BLOCK REQUIRED ( T/q) 0.9378185525 m2


    AREA OF THRUST BLOCK TO BE USED 1.44 M2

    NOTE : 1- Thrust block weight and soil friction are considered to be null wich is safer
    2-Thrust block must totally backfilled

    You might also like