NOTES :

LEGEND OF SYMBOLS
NO. SYMBOL DESCRIPTION 1. - THESE DRAWINGS FORM PART OF THE DOCUMENTS, AND SHOULD BE READ IN
STT CONJUNCTION WITH THE SPECIFICATIONS AND SCHEDULES.
FS1
1
- 2x28W-T5 FLUORESCENT LAMP, SURFACE MODULAR C/W PRISMATIC DIFFUSER, ELECTRONIC BALLAST
2. - THESE DRAWINGS ARE SCHEMATIC IN NATURE AND ARE NOT INTENDED TO SHOW
FS2 ALL POSSIBLE CONDITIONS. IT IS INTENDED THAT A COMPLETE ELECTRICAL
2
- 2x28W-T5 FLUORESCENT LAMP, SURFACE MODULAR C/W MATT HIGH QUALITY ALUMINIUM REFLECTOR AND LOUVER, ELECTRONIC BALLAST, FRAME 300x1200mm SERVICES SYSTEM BE PROVIDED WITH ALL NECESSARY EQUIPMENT, MATERIAL,
FS3 APPURTENANCES AND CONTROLS.
3
- 1x28W-T5 FLUORESCENT LAMP, SURFACE MODULAR C/W PRISMATIC DIFFUSER, ELECTRONIC BALLAST

F1
4
- 1x28W-T5 FLUORESCENT LAMP, ELECTRONIC BALLAST
F2 3. - CO-ORDINATE ALL WORK WITH ARCHITECTURAL, MECHANICAL AND ELECTRICAL
5 WORK. ROUTING SHOWN IS DIAGRAMMATIC. POSITIONS SHOWN ARE INDICATIVE.
- 2x28W-T5 FLUORESCENT LAMP, ELECTRONIC BALLAST

6
- 2x28W-T5 FLUORESCENT LAMP, WATERPROOF FITTING, IP65, C/W DIFFUSER & LAMP, ELECTRONIC BALLAST 4. - CO-ORDINATE ALL FLOOR AND WALL PENETRATIONS WITH ARCHITECTURAL
AND STRUCTURAL WORKS.
7

8 5. - CO-ORDINATE ALL SERVICES WORK IN CEILINGS WITH ARCHITECTURAL

- 2x28W-T5 FLUORESCENT LAMP, EMPLOYS STAINLESS STEEL TOGGLES, CORROSSION FORCE TYPE, HIGH PROTECTION FLUORESCENT LAMP, IP65, ELECTRONIC BALLAST REQUIREMENTS AND OTHERS TRADES. ALLOW FOR EXTENSIVE CO-ORDINATION
OF REFLECTED CEILING PLAN.
9
- 2x36W-T8 EXPLODED PROOFING LIGHT, ELECTRONIC BALLAST .

10 FR1
- 3x14W-T5 FLUORESCENT LAMP, RECESSED MODULAR C/W MATT HIGH QUALITY ALUMINIUM REFLECTOR AND LOUVER, ELECTRONIC BALLAST, FRAME 600x600mm 6. - PROVIDE ACCESS PANEL DRAWINGS FOR INSTALLATION BY OTHERS WHEN
SERVICES ARE CONCEALED AND ACCESS IS REQUIRED FOR COMMISSIONING
FR2
11 AND/OR MAINTENANCE.
- 2x28W-T5 FLUORESCENT LAMP, RECESSED MODULAR C/W MATT HIGH QUALITY ALUMINIUM REFLECTOR AND LOUVER, ELECTRONIC BALLAST, FRAME 300x1200mm

12 FR3
- 3x28W-T5 FLUORESCENT LAMP, RECESSED MODULAR C/W MATT HIGH QUALITY ALUMINIUM REFLECTOR AND LOUVER, ELECTRONIC BALLAST, FRAME 600x1200mm 7. - DIMENSIONS OF CONCRETE PLINTHS FOR REQUIREMENT SHALL BE SUBMITTED
FOR APPROVAL.
13
- INCANDESCENT LIGHT BULB 200W - WALL MOUNTED
8. - ENSURE THAT ALL PENETRATIONS THROUGH THE ROOF OR WALLS ARE
14 PROPERLY SEALED AGAINST RAIN WATER LEAKAGE DURING AND
- 2x36W-T5 FLUORESCENT LAMP, EMPLOYS STAINLESS STEEL TOGGLES, CORROSSION FORCE AND EXPLODED PROOFING TYPE, HIGH PROTECTION FLUORESCENT LAMP, IP65, ELECTRONIC BALLAST AFTER CONSTRUCTION.
EP
15
- 2x20W HALOGEN OR 2x4W LED EMERGENCY LIGHT, CORROSSION FORCE AND EXPLODED PROOFING TYPE, WALL MOUNTED, 3000 FFL; BATTERY PACK 2 HOURS MINIMUM - C/W SINGLE SOCKET OUTLET
9. - ELECTRICAL SWITCHES TO BE LOCATED AT 1250mm ABOVE FINISHED FLOOR
EP LEVEL, AND ELECTRICAL OUTLET AT 1250mm ABOVE FINISH FLOOR LEVEL,
16 EXIT
- 1x8W FLUORESCENT OR 1W LED EXIT LIGHT, CORROSSION FORCE AND EXPLODED PROOFING TYPE, WALL MOUNTED 200 ABOVE DOOR HEAD, BATTERY PACK 2 HOURS MINIMUM,- C/W SINGLE SOCKET OUTLET UNLESS OTHERWISE DIRECTED.

17
- 2x20W HALOGEN OR 2x4W LED EMERGENCY LIGHT, WALL MOUNTED, 3000 FFL; BATTERY PACK 2 HOURS MINIMUM - C/W SINGLE SOCKET OUTLET
10. -SCOPE OF WORK OF CONTRACTOR MUST BE APPROVED BY EVN BEFORE EXCUTING
18 EXIT
- 1x8W FLUORESCENT OR 1W LED EXIT LIGHT, CEILING MOUNTED, DIRECTION ARROW AS APPROPRIATE , BATTERY PACK 2 HOURS MINIMUM, GREEN/WHITE - C/W SINGLE SOCKET OUTLET
11. - CONTRACTOR IS RESPONSIBLE TO SUPPLY ALL ADDITIONAL DEVICE TO LOCAL POWER
19 EXIT
CO. REQUIREMENTS
- 1x8W FLUORESCENT OR 1W LED EXIT LIGHT, WALL MOUNTED 200 ABOVE DOOR HEAD, BATTERY PACK 2 HOURS MINIMUM,- C/W SINGLE SOCKET OUTLET

20 12. - SPECFICATION OF MEDIUM VOLTAGE EQUIPMENTS CAN BE CHANGE TO CORRESPOND

- METAL HALIDE LIGHTING 250W, HIGHBAY (TYPE ALUMINIUM REFLECTOR WITH RESITANCE GLASS COVER & PROTECTION NET), FLUX:19000lm, LIGHTING SET LAMP & CONTROL GEAR.
THE PLAN OF LOCAL ELECTRICAL SYSTEM

21
- METAL HALIDE LIGHTING 250W, RECESSED MOUNTED, LOWBAY (TYPE ALUMINIUM REFLECTOR WITH RESITANCE GLASS COVER & PROTECTION NET), FLUX:22000lm, LIGHTING SET LAMP & CONTROL GEAR.
13. - ALL PROTECTIVE DEVIECS UV/OV; EF/OV OF ACB MUST BE INSIDE ACB

22
- SODIUM STREET LIGHT MOUNTED ON POLE 250W/220V - IP66 (H=8m) - BODY AND REAR CANOPY MADE OF INJECTION MOULDED GLASS-FIBER REINFOREED POLYESTE, REFINED ALUMINUM REFLECTOR, WITH MCB-1P-10A INSTALL IN POLE. 14. - THE CONTRACTOR HAVE TO COVER ALL DETAILS WHICH IS NESCESSARY FOR SYSTEM
OPERATION WHEN DESIGN DRAWING/SPECIFICATION NOT SPCIFIED. E 15/07/2014 UPDATE ARCHITECT AND COMMENT
23
- SODIUM STREET LIGHT MOUNTED ON POLE 250W/220V - IP66 (H=8m) - BODY AND REAR CANOPY MADE OF INJECTION MOULDED GLASS-FIBER REINFOREED POLYESTE, REFINED ALUMINUM REFLECTOR, WITH 2 MCB-1P-10A INSTALL IN POLE.
D 09/06/2014 UPDATE ARCHITECT AND COMMENT
15. - ALL MCBs USED FOR PROTECTION OF MORTOR LOAD , AC LOAD SHALL BE OF TYPE D CHARACTERISTIC.
24 ACBs/MCCBs /MCBs IN THE MAIN SWITCHBOARDS, SUB-SWITCHBOARDS, DISTRIBUTION BOARDS
- SODIUM STREET LIGHT MOUNTED ON POLE 250W/220V - IP66 (H=8m) - BODY AND REAR CANOPY MADE OF INJECTION MOULDED GLASS-FIBER REINFOREED POLYESTE, REFINED ALUMINUM REFLECTOR, WITH 3 MCB-1P-10A INSTALL IN POLE.
SHOWN HERE IN AND OTHER DRAWINGS PROTECTING PRODUCTION LINE CIRCUITS, MOTOR CIRCUITS, C 07/05/2014 UPDATE ARCHITECT AND COMMENT
PUMPS,FANS,AHU'S, ETC. SHALL BE OF THE TYPE SUITABLE FOR MOTOR PROTECTION
25
- SODIUM STREET LIGHT MOUNTED ON BRACKET 250W/220V - IP66- BODY AND REAR CANOPY MADE OF INJECTION MOULDED GLASS-FIBER REINFOREED POLYESTE, REFINED ALUMINUM REFLECTOR, LIGHTING SET LAMP & CONTROL GEAR. INCORPORATING OVERLOAD AND SHORT CIRCUIT PROTECTIVE DEVICES B 24/01/2014 UPDATE ARCHITECT AND COMMENT
FL
26
- METAL HALIDE LIGHTING 1x70W, FLOOD LIGHT, WEATHER PROOF - IP 65, WALL MOUNTED, LIGHTING SET LAMP & CONTROL GEAR. REV. DATE AMENDMENT CHK.
FL1
27
- METAL HALIDE LIGHTING 1x150W, FLOOD LIGHT, WEATHER PROOF - IP 65, WALL MOUNTED, LIGHTING SET LAMP & CONTROL GEAR.
FL2 CABLE RUN IN CABE TRENCH MUST BE LAID ON BRACKET OR CABLE LADDER
28
- METAL HALIDE LIGHTING 1x250W, FLOOD LIGHT, WEATHER PROOF - IP 65, WALL MOUNTED, LIGHTING SET LAMP & CONTROL GEAR.
HIGH BAY, LOWBAY LIGHTING AND FLOOD LIGHTING ARE HIGH PF WITH CONSTANT POWER TYPE. PEPSICO
29
- DUPLEX SOCKET OUTLET 16A 1 POLE + N + E (B=FFL+300mm)
18. - SOURCE VOLTAGE IS PROVIDED WITH 220/380V. INTERNATIONAL VN CO.
WP
Plant Office: Pepsico Dong Nai Plant
30
- WEATHER PROOF IP-65 DUPLEX SOCKET OUTLET 16A 1 POLE + N + E (B=FFL+300mm) Lot 206, Amata IZ, Bien Hoa,Dong Nai, VN
MC
Tel : 8461 343 6893 Fax: 8461 393 6043
31
- DUPLEX SOCKET OUTLET MC (METAL CLAD) 16A 1 POLE + N + E (B=FFL+300mm)

32
- SINGLE SOCKET OUTLET WALL MOUNTED TYPE FOR HAND DRYER 16A 1 POLE + N + E (B=FFL+1500mm)

33 WP
- WEATHER PROOF IP-65 SINGLE SOCKET OUTLET 16A 1 POLE + N + E (B=FFL+300mm)

34 .............................................
- 16A-220VAC, 3 PIN UNIVERSAL, DUPLEX SOCKET OUTLET, DESK MOUNTED
IP44
35
- SINGLE PHASE INDUSTRIAL SOCKET OUTLET 3P-N-E-16A, RECESSED WALL MOUNTED, IP 44 (B=FFL+1250mm) Design Consultant & Project Management
IP67
36
- SINGLE PHASE INDUSTRIAL SOCKET OUTLET 3P-N-E-16A, RECESSED WALL MOUNTED, IP 67 (B=FFL+1250mm)
CHAN PHUONG ENGINEERING
37
IP44 (CPE)
- SINGLE PHASE INDUSTRIAL SOCKET OUTLET 3P-N-E-16A, WALL MOUNTED, IP 44 (B=FFL+1250mm) 2nd Floor,Sogetraco Building,30 Dang Van Ngu St.
38 Ward 10, Phu Nhuan District, HCMC
- SINGLE PHASE INDUSTRIAL SOCKET OUTLET EXPLODED 3P-N-E-16A, WALL MOUNTED, IP 67 (B=FFL+1250mm) Liason Address:11th Floor, Pax Sky Building,
IP44
39 123 Nguyen Dinh Chieu, Ward 6, District 3, HCMC
- THREE PHASE INDUSTRIAL SOCKET OUTLET 3P-N-E-32A, RECESSED WALL MOUNTED, IP 44 (B=FFL+1250mm) Tel: +848 3930 1983 / 86 Fax: +848 3930 1987
40
IP67
AC
- THREE PHASE INDUSTRIAL SOCKET OUTLET CORROSSION FORCE AND EXPLODED PROOFING TYPE 3P-N-E-32A, RECESSED WALL MOUNTED, IP 67 (B=FFL+1250mm)
CPE Email: contact@cpe-vn.com
Website: www.cpe-vn.com
41 MV MV

- MEDIUM VOLTAGE LINE

42 LV LV

- LOW VOLTAGE LINE

43 ELV ELV

- EXTRA LOW VOLTAGE

44
- 1 GANG 1WAY SWITCH 16A/220V (B=FFL+1250mm)

45
- 2 GANG 1WAY SWITCH 16A/220V (B=FFL+1250mm)

46
- 3 GANG 1WAY SWITCH 16A/220V (B=FFL+1250mm)

47
- 1 GANG 2WAY SWITCH 16A/220V (B=FFL+1250mm)

48
- 2 GANG 2WAY SWITCH 16A/220V (B=FFL+1250mm) Q314
49 (WP) - 2 GANG 1WAY SWITCH 16A/220V, WEATHER PROOF COVER BOX, IP54 (B=FFL+1250mm)
LOT 206, AMATA INDUSTRIAL ZONE,
50 (WP) - 3 GANG 1WAY SWITCH 16A/220V, WEATHER PROOF COVER BOX, IP54 (B=FFL+1250mm) BIEN HOA CITY, DONG NAI PROVINCE
51
- ROLLER SHUTTER BUTTON CONTROL (B=FFL+1250mm) (BY OTHER) VIET NAM
52
- ROLLER SHUTTER MOTOR (BY OTHER)

ISO
53
- 20A - 250VAC SINGLE POLE, 1 WAY ISOLATOR SURFACE SWITCH (B=FFL+1250mm)

SP SP
Status DETAIL DESIGN
54
- SINGLE PHASE ISOLATOR - 250VAC

TP TP
55
- THREE PHASE ISOLATOR - 500VAC
Design Subject MEP SYSTEM
56
- CABLE MANHOLE FOR LOW VOLTAGE( L1.1m x W 1.1m x D 1.4m)
Design Item GENERAL
57
- FAN CELLING MOUNTED 60W ( REVERSE TYPE)

58 SWF
- CEILING FAN SWITCH, (B=FFL+1250m)

59
- RUN UP, DOWN, FROM THROUGH

60 JB - ELECTRICAL POINT JUNCTION BOX

Issued date: Revision

GENERAL NOTES, LEGENDS, SYMBOLS & ABBREVIATIONS 1 E