Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 108 views

    Combination Meter LS430

    Uploaded by

    Adam Borowski
    The document provides instructions for overhauling a combination meter assembly. It describes removing components like the glass, plates, cover, and circuit board. Tape is recommended for prying components to avoid damage. Static electricity must be discharged before handling parts. Reinstallation follows the removal process in reverse order. Care is needed as some parts get extremely hot immediately after turning off the ignition.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Combination Meter LS430

    Uploaded by

    Adam Borowski
    108 views4 pages
    The document provides instructions for overhauling a combination meter assembly. It describes removing components like the glass, plates, cover, and circuit board. Tape is recommended for prying components to avoid damage. Static electricity must be discharged before handling parts. Reinstallation follows the removal process in reverse order. Care is needed as some parts get extremely hot immediately after turning off the ignition.

    Original Description:

    combination meter LS430

    Original Title

    combination meter LS430

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for overhauling a combination meter assembly. It describes removing components like the glass, plates, cover, and circuit board. Tape is recommended for prying components to avoid damage. Static electricity must be discharged before handling parts. Reinstallation follows the removal process in reverse order. Care is needed as some parts get extremely hot immediately after turning off the ignition.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    108 views4 pages

    Combination Meter LS430

    Uploaded by

    Adam Borowski
    The document provides instructions for overhauling a combination meter assembly. It describes removing components like the glass, plates, cover, and circuit board. Tape is recommended for prying components to avoid damage. Static electricity must be discharged before handling parts. Reinstallation follows the removal process in reverse order. Care is needed as some parts get extremely hot immediately after turning off the ignition.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    71−21

    INSTRUMENT PANEL/METER − COMBINATION METER ASSY

    COMBINATION METER ASSY


    710L3−01

    OVERHAUL
    HINT:
    S COMPONENTS: SEE PAGE 71−1
    S Installation is in the reverse order of removal.
    NOTICE:
    S There should be no oil or fingerprints on the combination meter glass and combination meter
    ECU.
    S Wipe off any oil or fingerprints from the combination meter glass and meter display panel with
    a soft cloth.
    S Be careful of static electricity when handling the meter display panel and combination meter
    ECU.
    S When disassembling the combination meter assy, eliminate static electricity by touching the
    vehicle body to prevent the components from being damaged.
    CAUTION:
    Do not touch the circuit. Even after the ignition switch is turned off, the meter display panel condens-
    er will still be charged.
    1. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER (SEE PAGE 71−6)
    2. REMOVE INSTRUMENT CLUSTER FINISH PANEL END (SEE PAGE 71−6)
    3. REMOVE INSTRUMENT CLUSTER FINISH PANEL (SEE PAGE 71−6)
    4. REMOVE COMBINATION METER ASSY (SEE PAGE 71−6)

    5. REMOVE COMBINATION METER GLASS


    (a) Using a screwdriver, disengage the 9 claws and remove
    the combination meter glass.
    HINT:
    Tape up the screwdriver tip before use.

    9 Claws
    B75413

    Author: Date: 4860


    71−22
    INSTRUMENT PANEL/METER − COMBINATION METER ASSY

    6. REMOVE COMBINATION METER PLATE NO.1


    (a) Remove the screw.
    (b) Using a screwdriver, disengage the 6 claws and remove
    the combination meter plate No.1.
    HINT:
    Tape up the screwdriver tip before use.

    6 Claws B75414

    A 7. REMOVE COMBINATION METER COVER NO.1


    (a) Remove the 6 screws.
    (b) Using a screwdriver, disengage the 3 claws and remove
    the combination meter cover No.1.
    HINT:
    Tape up the screwdriver tip before use.
    CAUTION:
    A is extremely hot immediately after the ignition switch is
    turned off.

    3 Claws
    B75415

    8. REMOVE METER DISPLAY PANEL


    (a) Remove the 8 screws.
    (b) Remove the meter display panel.

    B75416

    Author: Date: 4861


    71−23
    INSTRUMENT PANEL/METER − COMBINATION METER ASSY

    9. REMOVE COMBINATION METER ECU


    Claw
    (a) Remove the 4 screws.
    (b) Disconnect the connectors.
    (c) Using a screwdriver, disengage the claw and remove the
    combination meter ECU.
    HINT:
    Tape up the screwdriver tip before use.

    B75417

    (d) Using a screwdriver, disengage the combination meter


    ECU (speed meter assy).
    HINT:
    Tape up the screwdriver tip before use.

    B75418

    (e) Remove the combination meter ECU (speed meter assy).

    B75419

    Author: Date: 4862


    71−24
    INSTRUMENT PANEL/METER − COMBINATION METER ASSY

    10. REMOVE ECU METER CIRCUIT PLATE


    5 Claws
    (a) Using a screwdriver, disengage the 5 claws and remove
    the ECU meter circuit plate from the combination meter
    case No.1.
    HINT:
    Tape up the screwdriver tip before use.

    B75420

    11. INSTALL COMBINATION METER ECU


    (a) Install the pins and the combination meter ECU (speed
    meter assy).
    CAUTION:
    S Install the pins securely.
    S Hold a hand over the panel meter during installation.

    B75419

    (b) Engage the claw and install the combination meter ECU
    Claw
    with 4 screws.
    (c) Connect the connectors.

    B75417

    Author: Date: 4863

    You might also like