Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 621 views

    04 Hco

    Uploaded by

    asodiyamech
    The document discusses hydraulic clearance optimization (HCO) for a turbine. HCO aims to decrease the radial clearances between turbine components by axially moving the rotor using hydraulic pumps and accumulators. This narrowing of clearances is intended to increase power output by 1.5 MW and efficiency by 0.2% through reducing leakage in simple cycle turbines. The system uses hydraulic pumps, accumulators, pressure switches and solenoid valves to control the movement of pistons that change the clearance between turbine blades and casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    04 Hco

    Uploaded by

    asodiyamech
    621 views9 pages
    The document discusses hydraulic clearance optimization (HCO) for a turbine. HCO aims to decrease the radial clearances between turbine components by axially moving the rotor using hydraulic pumps and accumulators. This narrowing of clearances is intended to increase power output by 1.5 MW and efficiency by 0.2% through reducing leakage in simple cycle turbines. The system uses hydraulic pumps, accumulators, pressure switches and solenoid valves to control the movement of pistons that change the clearance between turbine blades and casing.

    Original Description:

    HCO for Gas Turbine

    Original Title

    04 HCO

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses hydraulic clearance optimization (HCO) for a turbine. HCO aims to decrease the radial clearances between turbine components by axially moving the rotor using hydraulic pumps and accumulators. This narrowing of clearances is intended to increase power output by 1.5 MW and efficiency by 0.2% through reducing leakage in simple cycle turbines. The system uses hydraulic pumps, accumulators, pressure switches and solenoid valves to control the movement of pistons that change the clearance between turbine blades and casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    621 views9 pages

    04 Hco

    Uploaded by

    asodiyamech
    The document discusses hydraulic clearance optimization (HCO) for a turbine. HCO aims to decrease the radial clearances between turbine components by axially moving the rotor using hydraulic pumps and accumulators. This narrowing of clearances is intended to increase power output by 1.5 MW and efficiency by 0.2% through reducing leakage in simple cycle turbines. The system uses hydraulic pumps, accumulators, pressure switches and solenoid valves to control the movement of pistons that change the clearance between turbine blades and casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    Hydraulic

    Clearance
    Optimization

    For Training Only O&M Training 1


    HCO

    For Training Only O&M Training 2


    Before and After

    clearance before clearance after


    optimization optimization

    stator stator

    Turbine

    rotor rotor
    The output-boosting feature narrows the mechanical clearance in the turbine.
    Decrease of radial clearances by axial movement of the rotor / bearing modification

    Objectives Target
    Simple Cycle
    • Power Output + 1,5 MW
    • Efficiency + 0,2 %

    For Training Only O&M Training 3


    HCO Skid

    For Training Only O&M Training 4


    HCO Pumps Accumulator

    For Training Only O&M Training 5


    Pressure Switch

    For Training Only O&M Training 6


    Supply reverse side
    Filter Solenoid valves
    Drain

    For Training Only O&M Training 7


    For Training Only O&M Training 8
    main piston reverse thrust piston Casing

    oil chamber
    Turbine
    Main
    Thrust Reverse Thrust Blade
    Bearing Bearing

    main piston reverse thrust piston Rotor


    Movement

    oil chamber

    Main
    Thrust Reverse Thrust
    Bearing Bearing
    For Training Only O&M Training 9

    You might also like