Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Patrick EIGRP Lab 1

    Uploaded by

    manishdokania
    This document outlines tasks for configuring EIGRP routing and authentication between routers in a network. The tasks include: 1. Configuring loopback interfaces on routers R1-R6 with specific IP addresses 2. Configuring EIGRP routing with a named process on all router interfaces 3. Configuring HMAC-SHA-256 authentication between routers R1 and R2 4. Configuring MD5 authentication between routers R3 and R6 5. Configuring router R5 to summarize its multiple loopback interfaces 6. Configuring an access list on router R3 to filter loopback interfaces 0 and 1 of router R6 7. Ensuring router

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Patrick EIGRP Lab 1

    Uploaded by

    manishdokania
    25 views2 pages
    This document outlines tasks for configuring EIGRP routing and authentication between routers in a network. The tasks include: 1. Configuring loopback interfaces on routers R1-R6 with specific IP addresses 2. Configuring EIGRP routing with a named process on all router interfaces 3. Configuring HMAC-SHA-256 authentication between routers R1 and R2 4. Configuring MD5 authentication between routers R3 and R6 5. Configuring router R5 to summarize its multiple loopback interfaces 6. Configuring an access list on router R3 to filter loopback interfaces 0 and 1 of router R6 7. Ensuring router

    Original Description:

    lab

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines tasks for configuring EIGRP routing and authentication between routers in a network. The tasks include: 1. Configuring loopback interfaces on routers R1-R6 with specific IP addresses 2. Configuring EIGRP routing with a named process on all router interfaces 3. Configuring HMAC-SHA-256 authentication between routers R1 and R2 4. Configuring MD5 authentication between routers R3 and R6 5. Configuring router R5 to summarize its multiple loopback interfaces 6. Configuring an access list on router R3 to filter loopback interfaces 0 and 1 of router R6 7. Ensuring router

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views2 pages

    Patrick EIGRP Lab 1

    Uploaded by

    manishdokania
    This document outlines tasks for configuring EIGRP routing and authentication between routers in a network. The tasks include: 1. Configuring loopback interfaces on routers R1-R6 with specific IP addresses 2. Configuring EIGRP routing with a named process on all router interfaces 3. Configuring HMAC-SHA-256 authentication between routers R1 and R2 4. Configuring MD5 authentication between routers R3 and R6 5. Configuring router R5 to summarize its multiple loopback interfaces 6. Configuring an access list on router R3 to filter loopback interfaces 0 and 1 of router R6 7. Ensuring router

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Lab 1

    EIGRP

    .1 S1/2
    DCE 12.1.1.0/24
    .2
    R1 R2
    S1/1

    F0/0

    10.1.1.0/24

    F0/0 F0/0

    .3 .4
    R3 R4
    S1/5
    S1/6 DCE
    DCE

    36.1.1.0/24 45.1.1.0/24

    .6 S1/3 S1/4 .5
    R6 R5

    Task 1

    Configure the following loopback interfaces based on the following chart:

    Router Interface/IP address


    R1 Lo0 – 1.1.1.1/24
    R2 Lo0 – 2.2.2.2/24
    R3 Lo0 – 3.3.3.3/24
    R4 Lo0 – 4.4.4.4/24
    R5 Lo0 – 5.5.0.5/24
    Lo1 – 5.5.1.5/24
    Lo2 – 5.5.2.5/24
    Lo3 – 5.5.3.5/24
    Lo4 – 5.5.4.5/24
    Lo5 – 5.5.5.5/24
    Lo6 – 5.5.6.5/24
    Lo7 – 5.5.7.5/24
    R6 Lo0 – 6.6.0.6/24
    Lo1 – 6.6.1.6/24
    Lo2 – 6.6.2.6/24
    Lo3 – 6.6.3.6/24
    Task 2

    Configure EIGRP Name on all routers and all interfaces including the loopback interfaces.

    Task 3

    Configure Hmac-Sha-256 authentication between R1 and R2 using cisco12 as the password.

    Task 4

    Configure MD5 authentication between routers R3 and R6 using cisco as the password.

    Task 5

    Configure R5 to summarize its Loopback interfaces in a single summary.

    Task 6

    Configure R3 to filter R6’s loopbacks 0 and 1. You should use a single statement in the access-
    list to accomplish this task.

    Task 7

    R2 should have full reachability to all routes including all loopback interfaces.

    You might also like