Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
270 views

Superimposed Dead Loads and Live Loads Load Magnitude

The document provides load and seismic parameters for structural design calculations. It includes superimposed dead and live loads, seismic parameters based on UBC 1997 and NSCP 2015, gravity and vertical load calculations for floors and roof, and horizontal wind load calculations based on a basic wind speed of 200 kph and NSCP 2010. Structural members and their properties are also defined for load calculations.

Uploaded by

Louie
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
270 views

Superimposed Dead Loads and Live Loads Load Magnitude

The document provides load and seismic parameters for structural design calculations. It includes superimposed dead and live loads, seismic parameters based on UBC 1997 and NSCP 2015, gravity and vertical load calculations for floors and roof, and horizontal wind load calculations based on a basic wind speed of 200 kph and NSCP 2010. Structural members and their properties are also defined for load calculations.

Uploaded by

Louie
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

SUPERIMPOSED DEAD LOADS AND LIVE LOADS

LOAD MAGNITUDE
Unit weight of normal weight concrete 23.5 kN/m
Concrete topping & finishes to all flr levels 1.2 kPa
Ceiling weight 0.5 kPa
Interior partition to all flr levels 1 kPa
Parapet CHB Wall 2.6 kN/m
Perimeter wall at all levels 6.7 kN/m
Live load to all floor levels 1.9 kPa

SEISMIC PARAMETER (UBC 1997 & NSCP 2015)


PARAMETER DATA
Occupancy Category TYPE IV
Seismic Importance Factor I = 1.0
Seismic Source Type TYPE A
Soil Profile Type Sd or 4
Seismic Zone ZONE 4
Near Source Factors Na = 1.2; Nv = 1.6
Seismic Response Coefficients Ca = 0.528; Cv = 1.024
Structural System Factor R = 8.5
Frame Material Factor Ct = 0.0731
PORTION OF THE BUILDING STOREY NO.
Foundation Top - Ground Floor 1
Ground Beams - First Floor 2
First Floor - Second Floor 3
Third Floor - Fourth Floor 4
Fourth Floor - Roof Deck 5

GRAVITY LOAD CALCULATIONS


A. Unit Load Calculations

AREA (mm^2) MOMENT OF INERTIA


STRUCTURAL MEMBERS WIDTH (m) DEPTH (m) (mm4)
Columns (all typical floors) 0.50 0.50 0.25 0.00521
Columns (below ground level) 0.60 0.60 0.36 0.01080
Beams (all floors) 0.30 0.60 0.18 0.00540
Beams (ground) 0.30 0.60 0.18 0.00540

B. Member Self-Weights
STRUCTURAL MEMBERS WIDTH (m) DEPTH (m) Ec (MN/m^2) SELF-WEIGHT (kN/m)

Columns (all typical floors) 0.50 0.50 25 6.25


Columns (below ground level) 0.60 0.60 25 9.00
Beams (all floors) 0.30 0.60 25 4.50
Beams (ground) 0.30 0.60 25 4.50
VERTICAL LOAD COMPUTATIONS

2ND-4TH FLOOR ROOF DECK


thickness (m) 0.30 thickness (m) 0.20

LOAD INTENSITY (kPa) LOAD INTENSITY (kPa)


W_dl 11.7 W_dl 8.88
W_ll 3.04 W_ll 3.04
W_total 14.74 W_total 11.92

SLAB AREAS (mm^2) SLAB AREAS (mm^2)


Triangle 2.25 Triangle 2.25
Trapezoid 5.25 Trapezoid 5.25
Rectangular 5.00 Rectangular 5.00

W LOADS (kN) W LOADS (kN)


W1 110.89 W1 75.58
W2 37.09 W2 34.62
W3 87.10 W3 64.80
HORIZONTAL LOAD COMPUTATIONS

GENERAL INPUT DATA:

Building Classification
Category III
(Occupancy) Category
Basic Wind Speed (V) 200.00 kph 55.60 mps

Exposure Category Exposure C

Building
Structure Type
Structures
Enclosure Classification Enclosed

1. Determination of NSCP 2010


Velocity Pressure (qz) section 207.10

q_z = 0.0000473 * (K_z) * (K_zt) * (K_d) * (V^2) * (I_w)

Velocity Pressure
K_z 1.09 Exposure
Coefficient

Topographic
K_zt 1.00
Factor
Wind
NSCP 203.3 &
K_d 0.85 Directionality
203.4
Factor
Square of Wind
V^2 40000.00 kph
Speed
NSCP Table 207-
I_w 1.15 Importance Factor 3
Velocity Pressure
q_z 2.02 kN/m^2
(kN.m^2)

2. Determination of
Pressure Coefficients

NSCP 2010
P_w (wind pressure) = (q_z) * G * (C_p) - (Q_i) * (GC_pi) section
207.5.12.2.1

P_w (completely enclosed) = (q_z) * G* (C_p)


Y - Direction Leeward Pressure
Coefficient
L_y 22.00 m
B_y 15.00 m
r_y 1.47
C_p.y -0.30

X - Direction Leeward Pressure


Coefficient
L_x 15.00 m
B_x 22.00 m
r_x 0.68
C_p.x -0.50
NSCP 2010
G 0.85 Gust Effect Factor section
207.8.1
3. Determination of
Wind Pressure
Table 207-4 Velocity Pressure Exp
Table 207-2 Wind Directionality Factor, K_d
Coefficients, K_b & K_z
Directionality Height
Structural Type Exposure (Note 1)
Factor, K_d above
A. Buildings Ground B
Level, z
Main Wind Force Resisting
0.85 (m) Case I
System

Components and Cladding 0.85 0-45 0.70

B. Arched Roofs 0.90 6 0.70


C. Chimneys, Tanks,
7.5 0.70
and Similar Structures

Square 0.90 9 0.70

Hexagonal 0.95 12 0.76

Round 0.95 15 9.81

D. Solid Signs 0.85 18 0.85

E. Open Signs and


0.85 21 0.89
Lattice Framework

F. Truss Towers 24 0.93

Triangular, Square,
0.85
Rectangular

All Other Cross-Sections 0.95

Wall Pressure Coefficients, C_p

Surface L/B C_p Use With


Wind Wall All Values 0.80 q_z

0-1 -0.50
Leeward Wall q_h
2.00 -0.30
>=4 -0.20
Side Wall All Values -0.70 q_h
07-4 Velocity Pressure Exposure
Table 207-3 Importance Factor, I_w
Coefficients, K_b & K_z

Exposure (Note 1) Occupancy Descriptio


I_w
Category n
B C D
Cases 1 Cases 1
Case 2 &2 &2
I Essential 1.15

0.57 0.85 1.03 II Hazardous 1.15


Special
0.62 0.9 1.08 III 1.15
Occupancy
Standard
0.66 0.94 1.12 IV 1
Occupancy

0.7 0.98 1.16 V Miscellaneous 0.87

0.76 1.04 1.22

0.81 1.09 1.27

0.85 1.13 1.31

0.89 1.17 1.34

0.93 1.21 1.38

You might also like