Crystals and Band Theory Bonding in Metals: The Electron Sea Model

Crystals and Band Theory
Bonding in Metals: The Electron Sea Model

Metallic bonding may be described as the sharing of free electrons among a
lattice of positively charged metal ions.
LEARNING OBJECTIVES
Describe the electron sea model of metallic bonding.
KEY TAKEAWAYS
Key Points
 Many of the unique properties of metals can be explained by metallic bonds.
 Metallic bonds can occur between different elements to form an alloy.
 In contrast to electrons that participate in both ionic and covalent bonds,
electrons that participate in metallic bonds delocalize, forming a sea of
electrons around the positive nuclei of metals. The availability of “free”
electrons contributes to metals being excellent conductors.
Key Terms
 metallic bond: A chemical bond in which mobile electrons are shared over
many nuclei; this leads to electrical conduction.
 electron sea: The body of delocalized electrons that surrounds positive
metal ions in metallic bonds.
Metallic Bonding
Metallic bonding may be described as the sharing of free electrons among a
lattice of positively charged metal ions. The structure of metallic bonds is very
different from that of covalent and ionic bonds. While ionic bonds join metals to
nonmetals, and covalent bonds join nonmetals to nonmetals, metallic bonds are
responsible for the bonding between metal atoms.
In metallic bonds, the valence electrons from the s and p orbitals of the
interacting metal atoms delocalize. That is to say, instead of orbiting their
respective metal atoms, they form a “sea” of electrons that surrounds the
positively charged atomic nuclei of the interacting metal ions. The electrons then
move freely throughout the space between the atomic nuclei.
Metallic Bonding: The Electron Sea Model: Positive atomic nuclei surrounded
by a sea of delocalized electrons (the blue dots).
The characteristics of metallic bonds explain a number of the unique properties of
metals:
 Metals are good conductors of electricity because the electrons in the
electron sea are free to flow and carry electric current.
 Metals are ductile and malleable because local bonds can be easily broken
and reformed.
 Metals are shiny. Light cannot penetrate their surface; the photons simply
reflect off the metal surface. However, there is an upper limit to the
frequency of light at which the photons are reflected.
Metallic bonds can occur between different elements, forming an alloy. Aluminum
foil and copper wire are examples of metallic bonding in action.
Aluminum foil: A sheet of aluminum foil is made up of metallic bonds.

Metallic bonds are mediated by strong attractive forces. This property contributes
to the low volatility, high melting and boiling points, and high density of most
metals. The group-XII metals zinc, cadmium, and mercury are exceptions to this
rule.
Doping: Connectivity of Semiconductors

The process of adding substances to a pure semiconductor for the purposes of
modulating its electrical properties is known as doping.
LEARNING OBJECTIVES
Examine the method of doping a pure semiconductor in order to increase its
electrical conductivity.
KEY TAKEAWAYS
Key Points
 Semiconductors are doped to generate either a surplus or a deficiency in
valence electrons.
 Doping allows researchers to exploit the properties of sets of elements,
referred to as dopants, in order to modulate the conductivity of a
semiconductor.
 There are two types of dopants, n-type dopants and p-type dopants; n-type
dopants act as electron donors, and p-type dopants act as electron
acceptors.
 Combining n-type and p-type semiconductors creates systems which have
useful applications in modern electronics.
Key Terms
 doping: The addition of small quantities of an element (an impurity) to a
pure semiconductor to change its electrical conductivity characteristics.
 p-type semiconductor: A doped semiconductor in which conduction is due
to the movement of positively-charged holes.
 n-type semiconductor: A doped semiconductor in which conduction is due
to the movement of additional electrons.
Electrical Conduction in Solids

There are two general categories of semiconductors: intrinsic semiconductors,
which are composed of only one material, and extrinsic semiconductors, which
have had other substances added to them to alter their properties. In
semiconductor production, the process of creating extrinsic semiconductors by
adding substances to a pure semiconductor for the purposes of modulating its
electrical properties is known as doping. Semiconductors are doped to generate
either a surplus or a deficiency in valence electrons.
Energy Bands in Solids

Electrons in free atoms have discrete energy values. In contrast, the energy states
available to the free electrons in a metal sample form a continuum of “energy
bands.” In the atomic lattice of a substance, there is a set of filled atomic energy
“bands” with a full complement of electrons, and a set of higher energy unfilled
“bands” which have no electrons. The highest energy band contains valence
electrons available for chemical reactions. The conduction band is the band above
the valence band. Electrons in the conduction band are free to move about in the
lattice and can conduct current. In order for a substance to conduct electricity, its
valence electrons must cross the band gap, which is the energy gap between the
valence band and conduction band.
Band Structure: The gap between the valence and conduction bands determines
whether a substance will conduct electricity.
If the gap between the valence and conduction bands is large, then the substance
does not conduct electricity easily (it is an insulator). On the other hand, these
bands overlap in metallic samples, which make these samples excellent
conductors of electricity. In the case of semiconductors, the gap is small enough
for electrons to jump to the conduction band due to thermal or some other
excitation.
Energy Bands in Solids: The overlap or size of the gap between the valence and
conduction bands determines the electrical conductivity of a substance.
Because the band gap is so small for semiconductors, doping with small amounts
of impurities can dramatically increase the conductivity of the material. Doping,
therefore, allows scientists to exploit the properties of sets of elements referred to
as “dopants” in order to modulate the conductivity of a semiconductor.
Semiconductor Doping
There are two types of dopants, n-type (“n” for negative), and p-type (“p” for
positive) dopants. n-type dopants act as electron donors and have extra valence
electrons with energies very close to the conduction band. When incorporated into
the atomic lattice of a semiconductor, the valence electrons of n-type dopants can
be easily excited to the conduction band. p-type dopants assist in conduction by
accepting electrons. When a p-type dopant is incorporated into the atomic lattice
of a semiconductor, it is able to host electrons from the conduction band, allowing
the easy formation of positive holes.
Generating an n-Type Semiconductor

When doping a semiconductor, such as the group IV element silicon (Si), with
arsenic (As), a pentavalent n-type dopant from group V in the periodic table
(which has one more valence electron than the semiconductor), the dopant
behaves as an electron donor. When this occurs, an atom of dopant replaces an
atom of silicon in the lattice, and therefore an extra valence electron is introduced
into the structure. The fifth valence electron of As creates a surplus of electrons.
When just a few atoms of the dopant replace silicon atoms in the lattice, an n-
type semiconductor is created. The newly created semiconductor is better able to
conduct current than the pure semiconductor.
Doping a Silicon Crystal with the n-Type Dopant Arsenic: Doping a pure
silicon semiconductor with the group V dopant arsenic creates a surplus of
conductive electrons.
Generating a p-Type Semiconductor

When a group IV semiconductor is doped with a p-type trivalent group III dopant
(such as boron, B), which has one less valence electron than the semiconductor,
the dopant acts as an electron acceptor. When a few atoms of trivalent dopant
replace silicon atoms in the lattice, a vacant state (or electron “hole”) is created
and can act as electron carrier through the structure, which creates a p-type
semiconductor. p-type semiconductors are characterized by a deficit of electrons
and positive holes, which have the same effect as a surplus of positive charge.
These positive holes accept electrons, rendering the semiconductor more
effective at conducting current.
Doping a Silicon Crystal with the p-Type Dopant Boron: Doping a pure
silicon semiconductor with the group III dopant boron results in a deficit of
conductive electrons and creates a positive hole.
The p-n Junction

When we place p-type and n-type semiconductors in contact with one another, a
p-n junction is formed. p-n junctions are basic components of most common
electrical devices. While semiconductors doped with either n-type dopants or p-
type dopants are better conductors than intrinsic semiconductors, interesting
properties emerge when p- and n-type semiconductors are combined to form a p-
n junction.
P-n junction diffusion and drift: Diagram of the diffusion across a p-n junction,
with the resultant uncovered space charges, the electric field and the drift
currents.
Reverse-biased p-n junction bands: Diagram of a p-n junction under reverse

bias, showing conduction and valence bands, the depletion zone, the potential
barrier, the resultant electric field, E0+EextE0+Eext, and the types of
semiconductor. The p-n junction forms between juxtaposed p- and n-type
semiconductors. The free electrons from the n-type semiconductor combine with
the holes in the p-type semiconductor near the junction. There is a small potential
difference across the junction. The area near the junction is called the depletion
band because there are few positive holes and few free electrons in this region.
If no electricity is being passed through the system, then no current passes
through the junction between n- and p-type semiconductors. In this scenario, the
surplus of electrons from the n-type semiconductor and the deficiency in electrons
from the p-type semiconductor combine to create a depletion region. In this state,
the system is said to be at equilibrium. However, if the cathode of a battery is
connected to the p-type semiconductor, and the anode is connected to the n-type
semiconductor, the system is said to be “forward biased.” In this scenario,
electrons flow from the anode toward the cathode pole and charge flows across
the junction. If the connectivity is reversed, with the battery anode connected to
the p-type semiconductor and the cathode connected to the n-type
semiconductor, the system is said to be “reverse biased” and negligible charge
flows across the junction. Combining n-type and p-type semiconductors creates a
system which has useful applications in modern electronics.
Forward Biased p-n Junction: If the cathode of a battery is connected to the p-

type semiconductor while the anode is connected to the n-type semiconductor,
the system is said to be forward biased and current flows through the junction.
Reverse Biased p-n Junction: If the battery anode is connected to the p-type
semiconductor and the cathode connected to the n-type semiconductor, the
system is said to be reverse biased and negligible current passes.
Electronic devices and instruments, such as digital alarm clocks, mp3 players,
computer processors, and the electronics in cell phones, all take advantage of
semiconductor technology. Doping provides a way to modulate the properties of
semiconductors that have broad applications in daily life.

Crystals and Band Theory Bonding in Metals: The Electron Sea Model

Uploaded by

Copyright:

Available Formats

Crystals and Band Theory Bonding in Metals: The Electron Sea Model

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Crystals and Band Theory Bonding in Metals: The Electron Sea Model

Uploaded by

Copyright:

Available Formats

Crystals and Band Theory

Bonding in Metals: The Electron Sea Model

Aluminum foil: A sheet of aluminum foil is made up of metallic bonds.

Doping: Connectivity of Semiconductors

Electrical Conduction in Solids

Energy Bands in Solids

Generating an n-Type Semiconductor

Generating a p-Type Semiconductor

The p-n Junction

Reverse-biased p-n junction bands: Diagram of a p-n junction under reverse

Forward Biased p-n Junction: If the cathode of a battery is connected to the p-

You might also like