Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
42 views

Lecture 01 2

- An atom consists of a nucleus with protons and neutrons surrounded by electrons in shells. Semiconductors like silicon have a small energy gap between valence and conduction bands. - Intrinsic semiconductors have equal numbers of electrons and holes, while extrinsic ones are doped with impurities to increase conductivity. N-type adds donors to increase electrons, while P-type adds acceptors to increase holes. - In N-type, donors contribute extra electrons that become majority carriers. In P-type, acceptors create holes that become majority carriers. Both have some minority carriers from thermal generation.

Uploaded by

সায়েম মুহাম্মাদ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

Lecture 01 2

- An atom consists of a nucleus with protons and neutrons surrounded by electrons in shells. Semiconductors like silicon have a small energy gap between valence and conduction bands. - Intrinsic semiconductors have equal numbers of electrons and holes, while extrinsic ones are doped with impurities to increase conductivity. N-type adds donors to increase electrons, while P-type adds acceptors to increase holes. - In N-type, donors contribute extra electrons that become majority carriers. In P-type, acceptors create holes that become majority carriers. Both have some minority carriers from thermal generation.

Uploaded by

সায়েম মুহাম্মাদ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

ELECTRONICS-1

Lecture -01
Some Basic Concepts
An atom is the smallest particle of an element that retains the characteristics of that element.
The nucleus consists of positively charged particles called protons and uncharged particles
called neutrons. The basic particle of negative charge are called electrons.
In the normal state, all atoms of a given element have the same
number of electrons as protons ; the positive charges cancel the negative
charges, and the atom has a net charge of zero.
Electrons orbit the nucleus of an atom at certain distances from the
nucleus.
Each discrete distance (Orbit) from the nucleus corresponds to a
certain energy level.
In an atom, the orbits are grouped into energy bands known as shells.
A given atom has a fixed number of shells.
The differences in energy levels with in a shell are much smaller than
the difference in energy between the shells.
Shells are designated are by the letters K,L,M, and so on.
The number of electrons that can exist in any shell is 2n².
Electrons with the higher energy exist in the outer most shell of an atom and relatively
loosely bound to the atom.

The outer most shell is known as valance shell and electrons in this shell are called valance
electrons.

The process of loosing a valance electrons is known as ionization and resulting positive
charged atom.

The escaped valance electrons are called free electrons.


Free electrons are also called conduction electrons.
Energy Bands
When an electron acquires enough additional
energy, it can leave the valance shell ,become a free
electron and exist in what is what is known as the
conduction band.
The difference in energy between the valance band
and conduction band is known as energy gap.
This is the amount of energy that have a valance
electron must have in order to jump from the
valance band to the conduction band.
Once in the conduction band ,the electron is free to
move throughout the material and is not tied to any
given atom.
Semiconductor

 A semiconductor is a material that is between conductors and insulators in its ability to


conduct electrical current.

So a semiconductor is neither a good conductor nor a good insulator.


Single element semiconductors are silicon, germanium and carbon.
Compound semiconductor is gallium arsenide which is commonly used.
Silicon Vs. Germanium

Germanium valance electrons are higher energy levels than those in silicon and, therefore,
require a smaller additional energy to escape from the atom. This property makes germanium
more unstable at higher temperatures, and this is the basic reason why silicon is the most
widely used semi conductive material.
Types of Semiconductor

Semiconductor are mainly two types:


1.Intrinsic Semiconductor.
2.Extrinsic Semiconductor.
Intrinsic Semiconductor

It has no impurity


At room temperature, it has a equal number of electrons and holes.
For every electron raised to the conduction band by external energy, a vacancy is left in the
valance band (hole), creating what is called an electron hole pair.
Recombination occurs when a conduction band electron loses energy and falls back into a
hole in the valance band.
Electron and Hole Current

When a voltage is applied across a piece of intrinsic silicon, the thermally generated free
electrons in the conduction band, which are free to move randomly in the crystal structure,
are now easily attracted toward the positive end. This movement of free electrons is one type
of current in a semi conductive material and is called electron current.
A valence electron can move into a nearby hole with little change in its energy level, thus
leaving another hole where it came from. Effectively the hole has moved from one place to
another in the crystal structure. Although current in the valence band is produced by valence
electrons, it is called hole current to distinguish it from electron current in the conduction
band.
So conduction in semiconductors is considered to be either the movement of free electrons in
the conduction band or the movement of holes in the valence band, which is actually the
movement of valence electrons to nearby atoms, creating hole current in the opposite
direction.
When a valence electron moves left to right to fill a hole while leaving another hole behind,
the hole has effectively moved from right to left.
Extrinsic Semiconductor

Semi conductive materials do not conduct current well and are of limited value in their
intrinsic state. This is because of the limited number of free electrons in the conduction band.

Their conductivity can be drastically increased by the controlled addition of impurities to the
intrinsic (pure) semi conductive material. This process, called doping.

This new semi conductive material is called Extrinsic semiconductor.


The two categories of impurities are n-type and p-type.
N type Semiconductor
To increase the number of conduction-band electrons in intrinsic silicon, pentavalent
impurity atoms are added such as arsenic (As),phosphorus (P), bismuth (Bi), and antimony
(Sb).
Four of the antimony atom’s valence electrons are used to form the covalent bonds with
silicon atoms, leaving one extra electron.

This extra electron becomes a conduction electron because it is not involved in bonding.
Because the pentavalent atom gives up an electron, it is often called a donor atom.
Since most of the current carriers are electrons, silicon (or germanium) doped with
pentavalent atoms is an n-type semi-conductor. The electrons are called the majority carriers
in n-type material.

There are also a few holes that are created when electron-hole pairs are thermally generated.
These holes are not produced by the addition of the pentavalent impurity atoms.
Holes in an n-type material are called minority carriers.
P type Semiconductor
To increase the number of holes in intrinsic silicon, trivalent impurity atoms are added such
as boron (B), indium (In), and gallium.
Each trivalent atom (boron, in this case) forms covalent bonds with four adjacent silicon
atoms.
All three of the boron atom’s valence electrons are used in the covalent bonds; and, since four
electrons are required, a hole results when each trivalent atom is added.
 Because the trivalent atom can take an electron, it is often referred to as an acceptor atom.
Since most of the current carriers are holes, silicon (or germanium) doped with trivalent
atoms is called a p-type semiconductor.
The holes are the majority carriers in p-type material.
There are also a few conduction-band electrons that are created when electron-hole pairs are
thermally generated.
These conduction-band electrons are not produced by the addition of the trivalent impurity
atoms.
Conduction-band electrons in p-type material are the minority carriers.

You might also like