Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Slot Groove

    Uploaded by

    RAJ MOHAN
    Slot, groove, and hole are all types of openings in an object. A slot is rectangular shaped with rounded edges, a groove is also rectangular but with straight edges, and a hole is circular. A hole can be a through hole or extend only part way, and can be stepped. A slot is an elongated hole stretched in one direction with rounded ends, cut into a flat plate. A groove is an elongated cylindrical cutout often used along edges such as in welding.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Slot Groove

    Uploaded by

    RAJ MOHAN
    40 views1 page
    Slot, groove, and hole are all types of openings in an object. A slot is rectangular shaped with rounded edges, a groove is also rectangular but with straight edges, and a hole is circular. A hole can be a through hole or extend only part way, and can be stepped. A slot is an elongated hole stretched in one direction with rounded ends, cut into a flat plate. A groove is an elongated cylindrical cutout often used along edges such as in welding.

    Original Title

    SLOT GROOVE.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Slot, groove, and hole are all types of openings in an object. A slot is rectangular shaped with rounded edges, a groove is also rectangular but with straight edges, and a hole is circular. A hole can be a through hole or extend only part way, and can be stepped. A slot is an elongated hole stretched in one direction with rounded ends, cut into a flat plate. A groove is an elongated cylindrical cutout often used along edges such as in welding.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    40 views1 page

    Slot Groove

    Uploaded by

    RAJ MOHAN
    Slot, groove, and hole are all types of openings in an object. A slot is rectangular shaped with rounded edges, a groove is also rectangular but with straight edges, and a hole is circular. A hole can be a through hole or extend only part way, and can be stepped. A slot is an elongated hole stretched in one direction with rounded ends, cut into a flat plate. A groove is an elongated cylindrical cutout often used along edges such as in welding.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    All three, slot, groove and hole, refer to the opening of an object.

    The difference among the three is:


    1. Slot : rectangular shaped but edges are circular in nature
    2. Groove : is also rectangular in nature and the edges are also
    straight
    3. Hole: is circular in nature
    Hole: is a circular cutout can be a through hole or extend only
    upto a blind depth we can also have a stepped hole this figure
    might help you to visualize

    Slot: -a slot is an elongated hole. -it is stretched in one


    direction and usually has full radii on both ends (the edges may or
    may not be round) -usually a slot is cut into a flat plate
    this a how a slot looks
    Groove : 1)-usually cut along the edge 2)-elongated cutout , usually
    cylindrical 3) -often used in welding

    You might also like