003 - MCQ - Enercon
003 - MCQ - Enercon
003 - MCQ - Enercon
Search
Menu
START HERE
ASK A QUESTION
ANSWER QUESTIONS
MCQ LIST
ADVERTISE HERE
Home Electronics Questions and Answers Power Generators / Sources / Principles and Applications
MCQ in Power Generators (Cells and Batteries) Part 3 | ECE Board Exam
This is the Multiples Choice Questions Part 3 of the Series in Power Generators, Sources, Principles and
Applications as one of the Electronics Engineering topic. In Preparation for the ECE Board Exam make sure to
expose yourself and familiarize in each and every questions compiled here taken from various sources including
but not limited to past Board Exam Questions in Electronics Engineering eld, Electronics Books, Journals and
other Electronics References.
A. decreases
C. increases
D. becomes doubled
View Answer:
Answer: Option A
Solution:
A. 2
B. 4
C. 8
D. 6
View Answer:
Answer: Option B
Solution:
A. pure dc
B. ac
C. pulsating dc
View Answer:
Answer: Option B
Solution:
104. The ac armature winding of an alternator operates at __________ the field of winding
View Answer:
Answer: Option B
Solution:
105. Why are the field poles and the armature of a dc machine laminated?
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option A
Solution:
A. leakage flux
B. armature reaction
C. dc field excitation
D. hysteresis loss
View Answer:
Answer: Option B
Solution:
A. no load
C. full load
View Answer:
Answer: Option A
Solution:
109. The mechanical power developed in a dc motor is maximum when back emf is equal to _____ the applied
voltage
A. twice
B. one third
C. one half
D. one fourth
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option A
Solution:
111. The transformer that should never have the secondary open circuited when primary is energized is
A. power transformer
B. auto transformer
C. voltage transformer
D. current transformer
View Answer:
Answer: Option D
Solution:
A. dc
B. ac
C. both ac and dc
D. battery
View Answer:
Answer: Option A
Solution:
113. The salient pole construction for field structure of an alternator is generally used for _________ machine
A. 2 pole
B. 8 pole
C. 4 pole
D. 6 pole
View Answer:
Answer: Option B
Solution:
A. increases
C. decreases
D. becomes infinite
View Answer:
Answer: Option C
Solution:
A. 50 hz
B. 120 hz
C. 60 hz
D. 240 hz
View Answer:
Answer: Option C
Solution:
116. In case if a 4 pole machine, 1 mechanical degree corresponds to ________ electrical degree
A. 2
B. 8
C. 4
D. 6
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option A
Solution:
118. AC machine in which the torque is produced by the interaction of currents in the stator and currents induced in
the motor by transformer action
B. stepper motor
C. synchronous motor
D. induction motor
View Answer:
Answer: Option D
Solution:
119. Machine in which torque is produced by the interaction of ac current in the stator and dc currents in the rotor
turning synchronism
A. synchronous motor
B. induction motor
D. stepper motor
View Answer:
Answer: Option A
Solution:
D. it is expensive
View Answer:
Answer: Option A
Solution:
121. DC machines which are subjected to abrupt changes of load are provided with
A. interpole windings
B. compensating winding
C. equalizers
D. copper brushes
View Answer:
Answer: Option B
Solution:
122. The shaft torque in a dc motor is less than total armature torque because of _________ in the motor
A. copper losses
C. field losses
D. hysteresis loss
View Answer:
Answer: Option B
Solution:
D. by interpole
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option C
Solution:
126. With respect to the direction of rotation, interpoles on a dc motor must have the same polarity as the main
poles
A. ahead of them
C. behind them
D. beside them
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option A
Solution:
128. In the short circuit test in a transformer, __________ winding is generally short circuited
A. high voltage
B. low voltage
View Answer:
Answer: Option B
Solution:
129. In a dc motor, the brushes are shifted from the mechanical neutral panel in a direction opposite to the rotation
to
A. decreased speed
B. reduced sparking
C. increase speed
View Answer:
Answer: Option B
Solution:
A. 3
B. 5
C. 6
D. 2
View Answer:
Answer: Option A
Solution:
131. If the lagging load power factor of an alternator is decreased, the demagnetizing effect of the armature
reaction
B. is increased
C. is decreased
D. becomes infinite
View Answer:
Answer: Option B
Solution:
132. In a very large dc motor with severe heavy duty, armature reaction effects are corrected by
View Answer:
Answer: Option B
Solution:
133. The amount of copper in the primary is _________ that of the secondary
B. smaller than
C. greater than
D. twice
View Answer:
Answer: Option A
Solution:
A. copper losses
B. iron losses
C. friction losses
D. total losses
View Answer:
Answer: Option B
Solution:
A. commutatively compounded
B. differentially compounded
C. series
D. shunt
View Answer:
Answer: Option D
Solution:
A. field excitation
B. armature resistance
C. load
D. applied voltage
View Answer:
Answer: Option C
Solution:
137. If the excitation of an alternator operating in parallel with other alternators is decreased, its
View Answer:
Answer: Option A
Solution:
138. The distribution of load between two alternators operating in parallel can be changed by changing
A. phase sequence
D. current direction
View Answer:
Answer: Option C
Solution:
139. After a shunt motor is up to speed the speed may be increased considerably by
View Answer:
Answer: Option B
Solution:
140. When the secondary of a transformer is short circuited, the primary inductance
A. is decreased
C. is increased
D. becomes zero
View Answer:
Answer: Option A
Solution:
141. For the same rating __________ motor has the least starting torque
A. commulatively compounded
B. shunt
C. series
D. differentially compounded
View Answer:
Answer: Option B
Solution:
142. The deciding factor in the selection of a dc motor for a particular application is its _____ characteristics
A. speed torque
D. speed
View Answer:
Answer: Option A
Solution:
C. hysteresis loss
D. copper loss
View Answer:
Answer: Option B
Solution:
View Answer:
Answer: Option C
Solution:
145. The demand for a large increase in torque of a dc shunt motor is met by a
View Answer:
Answer: Option B
Solution:
146. For 20% increase in current, the motor that will give the greatest increase in torque is _________ motor
A. shunt
B. series
C. differentially compounded
D. commulatively compounded
View Answer:
Answer: Option B
Solution:
147. What cell is used to detect infrared radiation, either its generated voltage or its change of résistance may be
used as a measure of the intensity of the radiation?
C. infrared cell
D. Leclanche cell
View Answer:
Answer: Option A
Solution:
148. A galvanic cell resulting from difference in potential between adjacent on the surface of a metal immersed in
an electrolyte
A. NiCd cell
C. local cell
D. lithium cell
View Answer:
Answer: Option C
Solution:
A. series
B. differentially compounded
C. shunt
D. commulatively compounded
View Answer:
Answer: Option A
Solution:
150. When load is removed, the motor that will run at the highest speed is the _________ motor
A. shunt
B. commulatively compounded
C. series
D. differentially compounded
View Answer:
Answer: Option C
Solution:
5 (100%) 2 votes
ADD COMMENT
Comment Text*
Name*
Email*
SUBMIT COMMENT
RECENT POSTS
LIST OF POWER
GENERATORS MCQ SERIES