Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Anchor (80-90)

    Uploaded by

    kabardey46
    This document calculates the required diameter of anchor bolts based on load values. It determines the required anchor bolt area and shear area using equations, factoring in loads of 1,689,480 Nt and 156,044 Nt. The required areas are 4,129.11 mm2 and 681.19 mm2. Applying a factor of safety of 1.5, the new required areas are 6,193.67 mm2 and 1,021.79 mm2. With 12 anchors, the nominal diameter is calculated to be 29.17 mm and the required shear diameter is 13.95 mm. A diameter of 30.00 mm is chosen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Anchor (80-90)

    Uploaded by

    kabardey46
    49 views1 page
    This document calculates the required diameter of anchor bolts based on load values. It determines the required anchor bolt area and shear area using equations, factoring in loads of 1,689,480 Nt and 156,044 Nt. The required areas are 4,129.11 mm2 and 681.19 mm2. Applying a factor of safety of 1.5, the new required areas are 6,193.67 mm2 and 1,021.79 mm2. With 12 anchors, the nominal diameter is calculated to be 29.17 mm and the required shear diameter is 13.95 mm. A diameter of 30.00 mm is chosen.

    Original Description:

    anchor

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document calculates the required diameter of anchor bolts based on load values. It determines the required anchor bolt area and shear area using equations, factoring in loads of 1,689,480 Nt and 156,044 Nt. The required areas are 4,129.11 mm2 and 681.19 mm2. Applying a factor of safety of 1.5, the new required areas are 6,193.67 mm2 and 1,021.79 mm2. With 12 anchors, the nominal diameter is calculated to be 29.17 mm and the required shear diameter is 13.95 mm. A diameter of 30.00 mm is chosen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    Anchor (80-90)

    Uploaded by

    kabardey46
    This document calculates the required diameter of anchor bolts based on load values. It determines the required anchor bolt area and shear area using equations, factoring in loads of 1,689,480 Nt and 156,044 Nt. The required areas are 4,129.11 mm2 and 681.19 mm2. Applying a factor of safety of 1.5, the new required areas are 6,193.67 mm2 and 1,021.79 mm2. With 12 anchors, the nominal diameter is calculated to be 29.17 mm and the required shear diameter is 13.95 mm. A diameter of 30.00 mm is chosen.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    BOLT DIAMETER CALCULATION

    As = T/ Fy + V / (m0,85Fy) Required Anchor Bolt Area page 20 eq. 9.4-2


    Asv = (V-0,3*D) / (m0,85Fy) Required Shear Area page 21 eq. 9.4-4
    D (downthrust load) = 0.00 Nt
    T= 1,689,480 Nt
    Fy = 490 MPa
    Fu = 586 MPa
    V= 156,044 Nt V= Fx²+Fz²
    m= 0.55 page 23, fig b
    As = 4,129.11 mm²
    Asv = 681.19 mm²
    Factor of safety : 1,5 (the anchor bolt area is increased by 1,5)
    As = 6,193.67 mm²
    Asv = 1,021.79 mm²
    No. Of Anchors 12
    
    2
    0.974 
    Nominal Diameter (d) = 29.17 mm As  d  
    Required Shear Diameter (dv) = 13.95 mm 4 n 
    Chosen Diameter 30.00 mm M 33 O.K.

    You might also like