Tes

練習單 5 Molecules in motion
A brief illustration
Calculate the root mean square speed of N2 molecules (M = 28.02 g mol−1) at 298 K
Example 6.1 Calculating the mean speed of molecules in a gas

What is the mean speed, , of N2 molecules in air at 25°C?
Self-test 20.1
Evaluate the root mean square speed of the molecules by integration.
You will need the integral :

Example 20.2 Calculating the vapour pressure from a mass loss

Caesium (m.p. 29°C, b.p. 686°C) was introduced into a container and heated to 500°C.
When a hole of diameter 0.50 mm was opened in the container for 100 s, a mass loss of
385 mg was measured. Calculate the vapour pressure of liquid caesium at 500 K.
Self-test 20.2
How long would it take 1.0 g of Cs atoms to effuse out of the oven under the same
conditions?
Physical Chemistry II
Chapter 20 Molecules in motion
Exercise
Exercises20.1(a) Determine the ratios of (a) the mean speeds, (b) the mean kinetic
energies of H2 molecules and Hg atoms at 20°C.
20.1(b) Determine the ratios of (a) the mean speeds, (b) the mean kinetic energies of He
atoms and Hg atoms at 25°C.
20.2(a) A 1.0 dm3 glass bulb contains 1.0 × 1023 H2 molecules. If the pressure exerted by
the gas is 100 kPa, what are (a) the temperature of the gas, (b) the root mean square
speeds of the molecules? (c) Would the temperature be different if they were O 2
molecules?
20.2(b) The best laboratory vacuum pump can generate a vacuum of about 1 nTorr. At
25°C and assuming that air consists of N2 molecules with a collision diameter of 395 pm,
calculate (a) the mean speed of the molecules, (b) the mean free path, (c) the collision
frequency in the gas.
20.3(a) Use the Maxwell distribution of speeds to estimate the fraction of N 2 molecules at
500 K that have speeds in the range 290 to 300 m s−1.
20.3(b) Use the Maxwell distribution of speeds to estimate the fraction of CO 2 molecules
at 300 K that have speeds in the range 200 to 250 m s −1.

20.5(a) At what pressure does the mean free path of argon at 25°C become comparable
to the size of a 1 dm3 vessel that contains it? Take σ = 0.36 nm2.
20.5(b) At what pressure does the mean free path of argon at 25°C become comparable
to the diameters of the atoms themselves?
20.6(a) At an altitude of 20 km the temperature is 217 K and the pressure 0.050 atm.
What is the mean free path of N2 molecules? (σ = 0.43 nm2.)
20.6(b) At an altitude of 15 km the temperature is 217 K and the pressure 12.1 kPa.
What is the mean free path of N2 molecules? (σ = 0.43 nm2.)
20.7(a) How many collisions does a single Ar atom make in 1.0 s when the temperature is
25°C and the pressure is (a) 10 atm, (b) 1.0 atm, (c) 1.0 µatm?
20.7(b) How many collisions per second does an N2 molecule make at an altitude of 15
km? (See Exercise 20.6b for data.)
20.8(a) Calculate the mean free path of molecules in air using σ = 0.43 nm2 at 25°C and
(a) 10 atm, (b) 1.0 atm, (c) 1.0 µatm.
20.8(b) Calculate the mean free path of carbon dioxide molecules using σ = 0.52 nm2 at
25°C and (a) 15 atm, (b) 1.0 bar, (c) 1.0 Torr.
20.9(a) A solid surface with dimensions 2.5 mm × 3.0 mm is exposed to argon gas at 90
Pa and 500 K. How many collisions do the Ar atoms make with this surface in 15 s?
20.9(b) A solid surface with dimensions 3.5 mm × 4.0 cm is exposed to helium gas at
111 Pa and 1500 K. How many collisions do the He atoms make with this surface in 10 s?
20.10(a) An effusion cell has a circular hole of diameter 2.50 mm. If the molar mass of
the solid in the cell is 260 g mol−1 and its vapour pressure is 0.835 Pa at 400 K, by how
much will the mass of the solid decrease in a period of 2.00 h?
20.10(b) An effusion cell has a circular hole of diameter 3.00 mm. If the molar mass of
the solid in the cell is 300 g mol−1 and its vapour pressure is 0.224 Pa at 450 K, by how
much will the mass of the solid decrease in a period of 24.00 h?
20.11(a) A solid compound of molar mass 100 g mol−1 was introduced into a container
and heated to 400°C. When a hole of diameter 0.50 mm was opened in the container for
400 s, a mass loss of 285 mg was measured. Calculate the vapour pressure of the
compound at 400°C.
20.11(b) A solid compound of molar mass 200 g mol−1 was introduced into a container
and heated to 300°C. When a hole of diameter 0.50 mm was opened in the container for
500 s, a mass loss of 277 mg was measured. Calculate the vapour pressure of the
compound at 300°C.
20.12(a) A manometer was connected to a bulb containing carbon dioxide under slight
pressure. The gas was allowed to escape through a small pinhole, and the time for the
manometer reading to drop from 75 cm to 50 cm was 52 s. When the experiment was
repeated using nitrogen (for which M = 28.02 g mol−1) the same fall took place in 42 s.
Calculate the molar mass of carbon dioxide.

20.12(b) A manometer was connected to a bulb containing nitrogen under slight
pressure. The gas was allowed to escape through a small pinhole, and the time for the
manometer reading to drop from 65.1 cm to 42.1 cm was 18.5 s. When the experiment
was repeated using a fluorocarbon gas, the same fall took place in 82.3 s. Calculate the
molar mass of the fluorocarbon.
20.13(a) A space vehicle of internal volume 3.0 m3 is struck by a meteor and a hole of
radius 0.10 mm is formed. If the oxygen pressure within the vehicle is initially 80 kPa and
its temperature 298 K, how long will the pressure take to fall to 70 kPa?
20.13(b) A container of internal volume 22.0 m3 was punctured, and a hole of radius
0.050 mm was formed. If the nitrogen pressure within the vehicle is initially 122 kPa and
its temperature 293 K, how long will the pressure take to fall to 105 kPa?

Tes

Uploaded by

Copyright:

Available Formats

Tes

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tes

Uploaded by

Copyright:

Available Formats

練習單 5 Molecules in motion

Example 6.1 Calculating the mean speed of molecules in a gas

Evaluate the root mean square speed of the molecules by integration.

You will need the integral :

Example 20.2 Calculating the vapour pressure from a mass loss

energies of H2 molecules and Hg atoms at 20°C.

atoms and Hg atoms at 25°C.

frequency in the gas.

500 K that have speeds in the range 290 to 300 m s−1.

at 300 K that have speeds in the range 200 to 250 m s −1.

to the diameters of the atoms themselves?

What is the mean free path of N2 molecules? (σ = 0.43 nm2.)

What is the mean free path of N2 molecules? (σ = 0.43 nm2.)

km? (See Exercise 20.6b for data.)

(a) 10 atm, (b) 1.0 atm, (c) 1.0 µatm.

much will the mass of the solid decrease in a period of 2.00 h?

much will the mass of the solid decrease in a period of 24.00 h?

manometer reading to drop from 75 cm to 50 cm was 52 s. When the experiment was

Calculate the molar mass of carbon dioxide.

20.12(b) A manometer was connected to a bulb containing nitrogen under slight

molar mass of the fluorocarbon.

You might also like