Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • f'c (Mpa) 21 fy (Mpa) 415 d (mm) 800: ρ (rho) computed is ok in ρmin, check in ρmax

    Uploaded by

    Karla Buenaflor
    20 views6 pages
    The document provides specifications for reinforced concrete beams including: - Dimensions of the beams such as depth (d), width (b) - Loads applied to the beams such as factored moment (Mu) - Material properties such as concrete compressive strength (f'c) and steel yield strength (fy) - Calculations checking the adequacy of the beams such as reinforcement ratio (ρ) and nominal moment capacity (Mn) The results of the calculations indicate the beams meet the required design criteria and are adequate for the given loads and specifications.

    Original Description:

    Reinforced Concrete

    Original Title

    RCONC 1a 2001

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides specifications for reinforced concrete beams including: - Dimensions of the beams such as depth (d), width (b) - Loads applied to the beams such as factored moment (Mu) - Material properties such as concrete compressive strength (f'c) and steel yield strength (fy) - Calculations checking the adequacy of the beams such as reinforcement ratio (ρ) and nominal moment capacity (Mn) The results of the calculations indicate the beams meet the required design criteria and are adequate for the given loads and specifications.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    20 views6 pages

    f'c (Mpa) 21 fy (Mpa) 415 d (mm) 800: ρ (rho) computed is ok in ρmin, check in ρmax

    Uploaded by

    Karla Buenaflor
    The document provides specifications for reinforced concrete beams including: - Dimensions of the beams such as depth (d), width (b) - Loads applied to the beams such as factored moment (Mu) - Material properties such as concrete compressive strength (f'c) and steel yield strength (fy) - Calculations checking the adequacy of the beams such as reinforcement ratio (ρ) and nominal moment capacity (Mn) The results of the calculations indicate the beams meet the required design criteria and are adequate for the given loads and specifications.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    of 6

    f'c (Mpa) 21

    fy (Mpa) 415
    d (mm) 800
    b (mm) 400

    Mu (Kn.m) 802
    Rn (Mpa) 3.48000
    ρ (rho) computed 0.009416
    ρmin 1 (rho) 0.003373
    ρmin 1 (rho) 0.002761
    use ρmin 0.003373
    use ρ (from chk in ρmin) ρ (rho) computed is ok in ρmin, check in ρmax

    ρmax 0.016209
    therefore USE ρ (rho) computed
    therefore ρ is 0.009416

    As (mm2) 3013.120

    try use db (mm) 32


    N 3.747
    use N 4
    β1 (beta) 0.85

    try use ds (mm) 10 THEREFORE


    spacing (mm) 54.67 try use h (mm)
    b (mm)
    MAX SPACING
    spacing max 1 25 CHECKING:
    spacing max 2 32 a (mm)
    use max spacing 32 Mn (KN.m)
    therefore ADEQUATE IN SPACING Mn min (KN.m)
    therefore
    determination of
    height (h) of beam adding wgt of beam
    no. of layers 1 wgt beam (Kn/m)
    h (mm) 866 fact wgt
    use h (mm) 870 Mu new (Kn.m)
    ϕMn (KN.m)
    threfore
    870
    400

    186.980
    943.230
    400
    ADEQUATE FROM REQ.

    wgt of beam
    8.210
    11.49
    824.98
    848.907
    BEAM IS ADEQUATE
    f'c (Mpa) 35 β1 (beta)
    fy (Mpa) 280
    d (mm) 870
    b (mm) 435

    Mu (Kn.m) 804 try use ds (mm)


    Rn (Mpa) 2.71000 spacing (mm)
    ρ (rho) computed 0.010165
    ρmin 1 (rho) 0.005000 MAX SPACING
    ρmin 1 (rho) 0.005282 spacing max 1
    use ρmin 0.005282 spacing max 2
    use ρ (from chk in ρmin) ρ (rho) computed is ok in ρmin, check in ρmax use max spacing
    therefore
    ρmax 0.032273
    therefore USE ρ (rho) computed determination of
    therefore ρ is 0.010165 height (h) of beam
    no. of layers
    As (mm2) 3846.870 h (mm)
    use h (mm)
    try use db (mm) 32
    N 4.783
    use N 5
    0.81

    10 THEREFORE
    41.75 try use h (mm) 775
    b (mm) 435

    25 CHECKING:
    32 a (mm) 87.000
    32 Mn (KN.m) 930.600
    ADEQUATE IN SPACING Mn min (KN.m) 400
    therefore ADEQUATE FROM REQ.

    adding wgt of beam


    1 wgt beam (Kn/m) 7.960
    936 fact wgt 9.55
    775 Mu new (Kn.m) 665.92
    ϕMn (KN.m) 837.540
    threfore BEAM IS ADEQUATE
    1.4 1.2 1.7 1.6
    DL 2001 2010 LL 2001 2010
    70 98 84 100 170 160
    40 56 48 175 297.5 280

    PLATE 2, 2001 AND 2010


    DL LL
    load 2001 2010 load 2001 2010
    concentrated concentrated
    120 168 144 0 0
    0 0 0 0
    0 0 0 0
    UDL UDL
    70 98 84 80 136 128
    0 0 0 0

    You might also like