TCZ 2
TCZ 2
TCZ 2
00
Specification for the Application of Thermal Spray
Coatings (Metallizing) of Aluminum, Zinc, and
Their Alloys and Composites for the Corrosion
Protection of Steel
SSPC-SP 1
UV light Test/ Solvent evaporation test to confirm
Degreasing solvent free surface.
Compressed air shall be checked for oil & moisture
Air Test presence as Per ASTM D 4285.
Surface profile Min 70 1. NACE No 2 Near white metal finish,
µm verify using SSPC VIS 1.
2.Steel surface temp at least 3°C above dew point,
RH should be below 80%.
3.Angular Profile Measurement ASTM D 4417
Method C Replica tape. one measurement every 10
to 20 m2.
4.Clear cello tape test to confirm absence of dust as
per ISO 8502-3
5. Method for testing Soluble salts as ISO 8502-6
and ISO 8502-9.
Masking 1. All fit & function surfaces
2.Overspary control areas
3. Areas not to be TSC
Blasting Media ( Should 1. Copper Slag, Size G16 to G 24,
be free from oil 2.Blasting media Selection as per As per SSPC AB1.
contamination, sodium 3. Salt in Blasting media Contamination measured
chloride, sulphur salts) As per ASTM D 4940.