®

DSEGenset

DSE3110 ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITY

MANUAL & AUTO START CONTROL MODULE BS EN 61000-6-2

EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
FEATURES the Industrial Environment

ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment

The DSE3110 can be utilised as a flexible outputs as well as MPU/ALT. – For use with non- TEMPERATURE
Manual or Auto Start Module for configurable inputs making this electronic engines only (magnetic BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
single gen-set applications or engine product ideal for a wide variety of pick-up/alternator sensing). BS EN 60068-2-2
only applications. The module has applications. The module can either • Optional frequency (Hz) sensing Bb/Be Dry Heat +70 oC
been designed to work with be programmed using the front panel from main AC alternator for gen- VIBRATION
electronic and non-electronic or by using the DSE Configuration set applications. BS EN 60068-2-6
engines, providing advanced engine Suite PC software. • Optional Magnetic Pickup speed Ten sweeps in each of three
major axes
monitoring and protection features. sensing. 5 Hz to 8 Hz @ +/-7.5 mm,
The module is available in two 8 Hz to 500 Hz @ 2 gn
The DSE3110 includes a back-lit icon variants: HUMIDITY
LCD display which clearly shows the CAN – For use with electronic BS EN 60068-2-30
status of the engine at all times. engines only. Db Damp Heat Cyclic 20/55 oC
@ 95% RH 48 Hours
• Optional frequency (Hz) sensing BS EN 60068-2-78
The module monitors engine speed, from main AC alternator for gen- Cab Damp Heat Static 40 oC
@ 93% RH 48 Hours
frequency, voltage and engine run set applications.
hours and also displays the warning SHOCK
and shutdown status. BS EN 60068-2-27
Three shocks in each of three major axes
The module includes fixed and 15 gn in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY control panel with the supplied sealing gasket.

OF GEN-SET APPLICATIONS
PC

6 1

USB CONFIGURABLE DC OUTPUTS DC POWER

PORT INPUTS SUPPLY 8-35V

DEUTZ
DSE3110 ISUZU
PERKINS
CATERPILLAR
MTU
7 VOLVO
CUMMINS
OTHER
SCANIA

DC OUTPUT GENERATOR FUEL & CRANK CHARGE ELECTRONIC ENGINES

SENSING OUTPUTS ALTERNATOR OR MAGNETIC PICK-UP
(Flexible with CAN)

VOLTS D+
+ + W/L

1 1ph
N

ISSUE 4
 ®

DSEGenset

DSE3110 SPECIFICATION

DC SUPPLY

MANUAL & AUTO START CONTROL MODULE CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
FEATURES supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries

CHARGE FAIL/ EXCITATION

8 V to 35 V fixed power source 2.5 W

NOMINAL STANDBY CURRENT

23 mA at 12 V, 18 mA at 24 V

MAXIMUM OPERATING CURRENT

35 mA at 12 V, 30 mA at 24 V

OUTPUTS
OUTPUT A (FUEL)
2 A DC at supply voltage

OUTPUT B (START)
2 A DC at supply voltage

AUXILIARY OUTPUTS C,D

2 A DC at supply voltage

GENERATOR
VOLTAGE RANGE
15 V - 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
10,000 Hz (max)

DIMENSIONS
OVERALL
98 mm x 79 mm x 40 mm
KEY FEATURES • Generator voltage display • Module can be configured to suit 3.9” x 3.1” x 1.6”
• Back-lit icon LCD display • Generator frequency display individual applications
PANEL CUT-OUT
• Front panel editing • Battery voltage display • Suitable for engine only 80 mm x 68 mm
• LED and LCD alarm indication • Engine speed display applications 3.1” x 2.7”
• Power Save mode • Hours counter • Compatible with a wide range of
MAXIMUM PANEL THICKNESS
• CAN and Magnetic Pick-up/Alt. • Engine pre-heat CAN engines 8 mm
versions available (specify on • Comprehensive shutdown or • Uses DSE Configuration Suite PC 0.3”
ordering) warning on fault condition software for simplified
• PC configurable configuration
• 6 Digital inputs KEY BENEFITS • IP65 rating (with optional gasket)
• 4 Outputs (2 configurable on • Tamper-proof hours counter offers increased resistance to
Magnetic Pick up/Alt., 4 provides accurate information for water ingress
configurable on CAN version) monitoring and maintenance • Licence-free PC software
• Configurable timers and alarms periods
• Alternative configuration • Multiple engine parameters are
• Remote Start input monitored simultaneously

RELATED MATERIALS
TITLE PART NO’S
DSE7310 Installation Instructions 053-028
DSE7320 Installation Instructions 053-029
DSE7200/7300 Quick Start Guide 057-101
DSE7200/7300 Operator Manual 057-074
DSE7200/7300 Configuration Suite PC Manual 057-077

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-064/07/10 (4) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457