Tcs 682 Spec

MODEL 682
PISTON POSITIVE
DISPLACEMENT
“The Standard of Measurement”
FLOW METER
TCS Model 682-15-SP-L-10
Distributed By:
MODEL 682 SERIES FLOW METER
“The Standard of Measurement”
The TCS model 682 series positive displacement reciprocating piston flow meter is
designed to accurately measure liquids within the Petroleum, Chemical, Food
Processing, Agricultural, and other industries requiring precise liquid flow
measurement.
DESIGN FEATURES
The TCS model 682 series flow meter is a true
positive displacement meter that has a unique inline
design consisting of three reciprocating pistons
operating within their respective measuring
chambers, where each piston works in a manner
similar to an automobile engine. The pistons are
fitted to a wobble plate, which has a shaft extending
from its upper surface and a valve pivot attached
beneath it. The valve pivot drives a sliding valve
from piston to piston as a known amount of product
flows through each cylindrical bore, controlling the
sequence of events in a smooth mechanical motion.
This smooth mechanical motion is then transferred
through the calibrator to the register.
ACCURACY AND FLOW RATE

The TCS model 682 series flow meter combines outstanding accuracy (±0.1% of flow rate) with an
exceptionally wide turndown ratio (200:1). At constant flow, with all other conditions being
constant, the flow meter does not vary more than ±0.025% in repeatability. This superior
performance is supported by the National Type Evaluation Program (NTEP) Certificate of
Conformance meeting the National Institute of Standards and Technology (NIST) Handbook 44
requirements and the Canadian Weights & Measures Sections 14 & 15 regulations. The TCS model
682 series flow meter is virtually unaffected by changing viscosities. The inline meter design allows
the TCS model 682 series flow meter to have a wide operating range (0.2 to 40 GPM) and fluid
compatibility that has been proven over many years of service.
FEATURES
• Excellent accuracy • Wide range of flow - 0.2 GPM to 40 GPM
• Wide turndown ratio 200:1. A perfect • Wide operating temperature

choice for slow flow measurement
• Wide fluid compatibility range
and batching applications
• Industrial-grade construction
• High tolerance to changing viscosity
• Proven design and reputation
METER TYPES
SP - Standard Petroleum Petroleum base products: Gasoline, Fuel Oil, Jet Fuel, Kerosene,
Lubricating Oil, etc.
AF - All Ferrous Petroleum base products, Industrial Chemicals, Agricultural products.
SS - Stainless Steel Covers the same products as the SP and AF models but includes special
handling liquids; such as Acids.
METER CONSTRUCTION
Model 682SP
Outer Housing Cast Iron
Internals Iron, Steel, and Stainless Steel
Cups Glass-filled TFE
Seals Synthetic Rubber
Model 682AF
Outer Housing Cast Iron
Internals Cast Iron and Stainless Steel
Seals Teflon® Gaskets or Teflon® O-rings
Model 682SS
Outer Housing 316 Stainless Steel
Internals 316 Stainless Steel
Seals Teflon® Gaskets or Teflon® O-rings
METER SPECIFICATIONS
Type Reciprocating 3 Piston Positive Displacement
Connections 11⁄2 inch flange
Flow Range Minimum: 0.2 GPM (.76 LPM)

Maximum: 40 GPM (151 LPM)
Working Pressure 150 PSI (10.5 Bar)
Working Model 682SP: -20°F to 200°F (-28.9°C to 93.3°C)

Temperature Models 682AF and 682SS: 20°F to 400°F (-28.9°C to 204.4°C)
Turndown Ratio 200:1
Enclosure Class Totally mechanical; if equipped with a pulse transmitter, the rating
of the pulsing device applies
Units of Measure U.S. Gallons, STANDARD

Liters, pounds, etc. available upon request
Teflon® is a registered trademark of DuPont.
TCS MODEL 682 SERIES FLOW METER OPTIONS
Register Veeder Root 5 wheel resetable with totalizer (9999.9)
Preset Veeder Root 5-digit (4 whole units, plus 1 tenths 9999.9)
Ticket Printer Veeder Root Zero Start (Standard)
Shut-off Valve Available with Veeder Root Preset Register. Appropriate internals, gaskets, and seals
to each model. Note: 2 stage valve closure.
Cutoff Switch Available with 2 stage Veeder Root Preset Register.
Temperature Compensator Veeder Root
Transmitter Type Veeder Root
Transmitter Output 1, 10 or 100 pulses per revolution of output shaft.
Air Eliminator Available with the appropriate internals, gaskets, and seals to each model.
TCS MODEL 682 SERIES FLOW METER DESCRIPTIONS

Standard Petroleum All Ferrous 316 Stainless Steel
(SP) (AF) (SS)
Description Model Number Model Number Model Number
Approx. Weight Approx. Weight Approx. Weight
Meter 682-15-SP-L-1 682-15-AF-L-1 682-15-SS-L-1
96 lbs. 96 lbs. 98 lbs.
Meter and register 682-15-SP-L-2 682-15-AF-L-2 682-15-SS-L-2
110 lbs. 110 lbs. 112 lbs.
Meter, register, and printer 682-15-SP-L-3 682-15-AF-L-3 682-15-SS-L-3
119 lbs. 119 lbs. 121 lbs.
Meter, register, and air eliminator 682-15-SP-L-4 682-15-AF-L-4 682-15-SS-L-4
171 lbs. 171 lbs. 179 lbs.
Meter, register, printer, and air 682-15-SP-L-6 682-15-AF-L-6 682-15-SS-L-6
eliminator 180 lbs. 180 lbs. 188 lbs.
Meter, register, preset, and valve 682-15-SP-L-8 682-15-AF-L-8 682-15-SS-L-8
RIGHT HAND FLOW 146 lbs. 146 lbs. 150 lbs.
Meter, register, printer, preset, and 682-15-SP-L-9 682-15-AF-L-9 682-15-SS-L-9
valve RIGHT HAND FLOW 155 lbs. 155 lbs. 159 lbs.
Meter, register, preset, valve, and 682-15-SP-L-10 682-15-AF-L-10 682-15-SS-L-10
air eliminator RIGHT HAND FLOW 207 lbs. 207 lbs. 217 lbs.
Meter, register, printer, preset,
valve, and air eliminator RIGHT 682-15-SP-L-11 682-15-AF-L-11 682-15-SS-L-11
HAND FLOW 216 lbs. 216 lbs. 226 lbs.
Typical Accuracy Curve Dimensional Data, mm (in.)

+.2
Model 682 Reciprocating Piston Flowmeter
% DEVIATION
+.1
-.1
-.2
0 10 20 30 40 50 60 70 80 90 100
Gallons Per Minute
Pressure Drop Curve

20
15
P.S.I.
10
0
5 10 15 20 25 30 35 40
Gallons Per Minute/Solvent
Total Control Systems

2515 Charleston Place • Fort Wayne, IN 46808
www. tcsmeters.com • 800/348-4753 • 219/484-0382
5/00

Tcs 682 Spec

Uploaded by

Copyright:

Available Formats

Tcs 682 Spec

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tcs 682 Spec

Uploaded by

Copyright:

Available Formats

MODEL 682

TCS Model 682-15-SP-L-10

ACCURACY AND FLOW RATE

• Wide turndown ratio 200:1. A perfect • Wide operating temperature

AF - All Ferrous Petroleum base products, Industrial Chemicals, Agricultural products.

Connections 11⁄2 inch flange

Flow Range Minimum: 0.2 GPM (.76 LPM)

Working Pressure 150 PSI (10.5 Bar)

Working Model 682SP: -20°F to 200°F (-28.9°C to 93.3°C)

Turndown Ratio 200:1

Units of Measure U.S. Gallons, STANDARD

TCS MODEL 682 SERIES FLOW METER DESCRIPTIONS

Typical Accuracy Curve Dimensional Data, mm (in.)

Pressure Drop Curve

Total Control Systems

You might also like