Prys

PRICE LIST APRIL 16, 2018
Rev. 3 effective October 24, 2018
Many new Flomatic valve products in

2018 are now NSF/ANSI 61 certified.
These products are marked with a
NSF/ANSI 61 logo.
85High Quality Valves Built to Last…

High Quality Valves Built to Last ...
LOOK AT WHAT’S NEW!
Flomatic is pleased to supply valve products that are in full compliance with the
Consolidated Appropriations Act of 2014 (Public Law 113-76) “American Iron
and Steel (AIS)” requirement on projects that are funded by the Clean Water
State Revolving Fund (CWSRF) and Drinking Water State Revolving Fund (DWS-
800.833.2040
RF). Many valves are designed, manufactured, serviced and supported out of our
facility in Glens Falls, New York, USA. Complete unleaded valve product line that
complies with all low lead laws – Reduction of Lead in Drinking Water Act and
NSF/ANSI 61 stringent requirements for equipment that comes in contact with
potable water.
®
• Model Sylax 3 – Butterfly Valves
NEW Flomatic SYLAX 3, Strong DI body, EPDM vulcanized seat, SS stem and disc,
®
250 PSI bi-directional pressure rating, 230˚F max. temperature rating NSF/ANSI
61 certified, for use with ANSI 125/150# flanges, ISO 5211 top flange for easy
actuation, rated to 250 PSI for dead-end service.
See Page: 16
• Model 80EVFD & 80SSVFD – Tapped Valves Standard

New tapped valves with a patented VFD design are now standard 1” through 1 1/2” with
WHAT’S NEW AT
tappings of 1/8” and 1/4” for all types of water well accessories. The “A”, “B” & “C” taps
allow for easy connection of the pressure switch, pressure gauges and many other types
of accessories. These valves have very low head loss and noiseless operation. The valves
have extra-large bosses that give more threads to ensure the fitting is secure. Also male
threaded end of accessories will not interfere with the check valve operation or poppet.
New VFD style are now standard 1”- 1 1⁄2” and old style no longer offered.
See Page: 2 & 6
®
Also see our new Flo-Trol Flow Control Valves, See page 25.
www.flomatic.com I High Quality Valves Built to Last...
TABLE OF CONTENTS
VALVES BY TYPE VALVES BY MATERIAL
TABLE OF CONTENTS
Air Release/ Vacuum Page Break Off Plugs 5 Unleaded Bronze Page
Miniair®, Maxiair®, Wellair® 31 Y-Strainers 20
Comboair , Sewair Series 31,32
® ®
Check Valves Page
Backflush 32 Ball Check Cast Iron Page
Auto-Drain - Model 70 1 508, 408,4082,208,208T,208B 13 Air Release/Vacuum 31-32
Auto-Vac® - Model 77 13 Globe Style Silent Check Ball Check 13
402BT, 402BTR, 402S6, 402S6R 10 Foot Valve 19
Automatic Control Valve Page Hydraulic Check Globe Style Silent Check 10
Altitude – C1001, CF1001 24 Strainer 20
C201, CF201, Swing Check 11
C205, CF205 22 Auto Drain 1 Wafer Check 10
Back Pressure – Submersible Check
C301, CF301 22 80E Series, 100E, 100XLE,
Ductile Iron Page
Cycle Gard® – CB152E, C153 80EVFD, 100EVFD, 2
Check Valves 3-5
C3100E, CI, CN, C152E Series 30,29 80DI, 80DI8R, 82DI8R-VFD
80MDWVFD, 80DIVFD, 3 Butterfly Valve 15
Float Valve Plug Valves 14
80DI8RVFD 3
C701, CF701 23 Control Valve 22-27
82DP, 82DI-VFD, 5
Flow Control Swing Check 12
80DIA, 80DIB 4
C901, CF901 24 80DICLVFD, 80SL 5 Butterfly Valve 16
Hydraulic Check 82S6-VFD, 80MS6-VFD,
C1001, CF1001 24 80S6VFD, 7 Galvanized Page
Pressure Reducing 100SSVFD, 100MSSVFD 6 Strainers 20
C101, CF101, C150E 22 Swing Check
Pressure Relief 78A, 78, 90/92, 93 Series 11 Plastic Page
C401, CF401 23 745, 745BF, 745PI, 745BFPI 12 Ball Check 13
Pump Control In-line Check 19
C601, CF601, C621 23 Wafer & SS Check Insert Check 19
Solenoid Actuated Split Disc®, 888, 888S6 9,10 Foot Valves 18
C801-2, CF801-2 24 812X, 888VFD, 888S6VFD Strainers 20
Surge Arrestor 816, 816FL, 816HS Series 8 Submersible Check 19
C501, CF501 23
Flo-Trol® 25 Foot Valves Page Stainless Steel Page
60SE, 333 Series, 190 Series, Foot Valve 19
Backflow Preventers Page 124P, 104 Series, 18 Strainers 20
Hose Connection Vacuum Breaker 357, 63, 812 Series, 19 Submersible Check 6-9
GFHB8 33 80S6FVFD, 302BT, 302S6 19 Wafer Check 9
Dual Check Valve, GF8080E, Series 16, 16FL 20
GF8080SS 33
800.833.2040
Unleaded Bronze Page
Dual Check Valve w/ Atmos. Vent Gate Valves & Shut Off Page Foot Valves 18
GF8200 33 Plug Valves 14
In-line Check 1-2
NRS AWWA C515, C509, 34
Strainers 20
Unleaded Ball Valves Page OS&Y AWWA C509 34
Submersible Check 1-2
(Quarter Turn) Sylax®3 16
SS Ball Valves 24 Sales Agents 35
Strainers Page
Butterfly Valves Page 6P, 46 Series, 6SE 20
®
Azure AWWA C504 15 Y Strainers 20
Go to www.flomatic.com and type the model

Sylax®3 Wafer & Lug Style 16
number in the search Product/Site Search

Sylax®3 Electric Actuated 16
High Quality Valves Built to Last... II www.flomatic.com

80E Discount Code A 100E Discount Code A 80HTE Discount Code A
80E - ENVIRO CHECK® body casting unleaded bronze with 100E - ENVIRO CHECK® body casting unleaded bronze. Hex 80HTE - ENVIRO CHECK® body with threaded female x
threaded female x female connection. This valve features a non- shaped for easy wrenching, this valve features a non-spin acetal female connections. Features a high temperature stainless steel
spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") poppet with a poppet with a NITRILE (Buna-N) seal and stainless steel spring. poppet and a VITON seal with a stainless steel spring. Ideal for hot
Temp Max: 180°F (80C) Pressure Max: 400 PSI water applications.
NITRILE (Buna-N) seal and a stainless steel spring.
SIZE PART NO. WGT. CASE QTY. LIST PRICE Temp Max: 400°F (150C) Pressure Max: 100 PSI*
1" 4201E 1.1 50 $ 46.50
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. LIST PRICE
1/ "** 4029HTE** .2 $ 81.00
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1"* 4201LE* 1.2 50 $ 50.00 2
1/ "* 11/4 " 4202E 1.4 36 $ 64.60 3/ " 4030HTE .8 $ 85.00
4 5118E* .2 10 $ 63.64 4
3/ "* 1" 4031HTE 1.4 $ 86.00
5159E* .2 10 $ 63.97
11/4 " 4032HTE 1.7
8
1/ "
$ 113.00
4029E .2 100 $ 46.09
* Longer threads
11/2 " 4033HTE 2.7
2
3/ "
$ 158.00
4030E .7 100 $ 46.67
4
2" 4034HTE 4.0 $ 225.00
1" 4031E 1.3 50 $ 49.14
21/2 " 4035HTE 6.5 $ 750.00
11/4 " 4032E 1.6 36 $ 68.18
80ME A
3" 4036HTE 13 $ 890.00
ENVIRO CHECK® VALVES 800.833.2040
11/2 " 4033E 2.5 25 $ 95.16 4" 4037HTE 25 $ 1,620.00

2" 4034E 3.1 16 $ 153.52
Discount Code
21/2 "** 4035E** 6.5 $ 651.00
3"** 4036E** 13 $ 786.00 * At high temps the pressure rating is derated to 100 PSI,
4"** 4037E** 24 $ 1,362.00 valve will take higher pressure at lower temps.
** Tefzel Poppet
* Pressure Max 200 PSI
** Unleaded bronze poppet, 21/2" and larger are recommended for
70 A
vertical applications. See 80EVFD or 80DI-VFD for horizontal.
100ME A
Discount Code
Discount Code 80ME - ENVIRO CHECK body casting unleaded bronze. This
®
valve features a non-spin poppet, with a NITRILE (Buna-N) seal

and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE

1"M x 1"F* 4071EVFD* .7 50 $ 59.49
2"M x 2"F 4079E 2.5 16 $ 162.00
* VFD poppet style discontinued 4071E

100ME - ENVIRO CHECK® body casting unleaded bronze. 70 - Auto-Drain- This 1” valve is available in stainless steel
and PVC. All internal parts are engineered composite with a
Hex shaped body for easy wrenching, this valve features a non-
100XLE A
stainless steel disc and resilient seat.
spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel
spring. Temp Max: 180°F (80C) Pressure Max: 400 PSI
Discount Code
Temp Max: 180°F (80C) Pressure Max: 400 PSI 5 PSI – open pressure – standard
SIZE PART NO. WGT. CASE QTY. LIST PRICE MATERIAL PART NO. CASE QTY. LIST PRICE
1"M x 1"F* 4071EVFD* .7 50 $ 59.49
11/4 "M x 1"F 4221LE 1.4 50 $ 50.16 PVC 4501PX 12 $ 47.00
Stainless Steel 4501SSX 12 $ 58.00
11/4 "M x 11/4 "F 4242E 1.5 50 $ 67.00
11/2 "M x 11/4 "F 4223E 1.5 36 $ 99.00 10 PSI – open pressure – optional
* VFD poppet style discontinued 4071E MATERIAL PART NO. CASE QTY. LIST PRICE
100DPE A
PVC 4501P 12 $ 47.00
Discount Code Stainless Steel 4501SS 12 $ 58.00
100XLE - ENVIRO CHECK® body casting unleaded bronze.
Hex shaped body for easy wrenching, this valve features a non-
spin acetal poppet with a NITRILE (Buna-N) seal and stainless Note: 10 PSI spring require minimum 5 gpm to close. For
steel spring. Features extra long threads for bell end special PVC lower flows or long horizontal runs use standard 5 PSI.
drop pipe.
New NSF/ANSI 61
1"M x 1"F 4201XLE 1 36 $ 57.00
11/4 "M x 11/4 "F 4242XLE 1.5 36 $ 75.00
See page 7 for stainless steel version Certified Valves

stainless steel spring and non-spin acetal poppet. 11/4" male and
100DPE - ENVIRO CHECK® body. Dual purpose check valve,
1" female threads on both ends with a NITRILE (Buna-N) seal.
NOTE: ENVIRO CHECK WITH SS POPPET ADD "S"

TO END OF PART # AND 10% TO LIST.

11/4"M & 1"F 4231E 1.1 50 $ 59.50
1 High Quality Valves Built to Last...

80EVFD Discount Code A 80AEVFD Discount Code A 80BEVFD Discount Code A
W!
W!
NE
NE
ENVIRO CHECK® VALVES 800.833.2040

®
80EVFD/100EVFD-ENVIRO CHECK® - body casting 80AEVFD-ENVIRO CHECK® - Body casting unleaded bronze 80BEVFD-ENVIRO CHECK - Body casting unleaded
unleaded bronze with threaded female x female connection. The with threaded female x female connection. The valve features a bronze with threaded female x female connection. The valve fea-
valve features a high strength patented guide and poppet and high strength patented guide, poppet and spring with a NITRILE
spring with a NITRILE (Buna-N) seal. tures a high strength patented guide, poppet and spring with a
(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on the NITRILE (Buna-N) seal. This valve has two drilled and tapped
Temp Max: 180°F (80C) Pressure Max: 400 PSI inlet side. holes; 1/8" inlet side and 1/4" outlet side.
SIZE PART NO. STYLE WGT. CASE QTY. LIST PRICE
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
Composite Poppet & Guide SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
1” 4201EVFD 100 1 50 $ 54.36 3/ "*
4 4040E* .7 100 $ 55.14 3/ "*
4 4050E* .6 100 $ 57.22
1” 4031EVFD 80 1 50 $ 57.25 1" 4041E 1.2 36 $ 61.99 1" 4051E 1 36 $ 67.45
11/4 " 4202EVFD 100 1.4 36 $ 75.20 1" 4041EVFD 1.2 36 $ 65.25 1" 4051EVFD 1 36 $ 71.00
11/4 " 4032EVFD 80 1.4 36 $ 79.79 11/4 " 4042E 1.5 36 $ 82.94 11/4 " 4052E 1.5 36 $ 83.60
11/2 " 4033EVFD 80 2.5 25 $ 116.00 11/4 " 4042EVFD 1.5 36 $ 87.31 11/4 " 4052EVFD 1.5 36 $ 87.26
11/2 " 4043E 2.4 25 $ 103.17 11/2 " 4053E 2.3 36 $ 107.35
11/2 " 4043EVFD 2.4 25 $ 108.60 11/2 " 4053EVFD 2.3 36 $ 113.05
Stainless Poppet & Composite Guide
1” 4201ESVFD 100 1 50 $ 59.79 2"* 4044E* 3 16 $ 167.99 2"* 4054E* 2.9 16 $ 170.00
1” 4031ESVFD 80 1 50 $ 62.97 21/2 "* 4045E* 6.4 $ 788.00 21/2 "* 4055E* 6.3 $ 830.00
11/4 " 4202ESVFD 100 1.4 36 $ 82.73 3"* 4046E* 13 $ 1,150.00 3"* 4056E* 13 $ 1,171.00
11/4 " 4032ESVFD 80 1.4 36 $ 87.77
4”* 4047E* 25 $ 1,520.00 4"* 4057E* 25 $ 1,532.00
11/2 " 4033ESVFD 80 2.5 25 $ 125.00
2”* 4034EVFD* 80 3 16 $ 170.00
21/2 ”* 4035EVFD* 80 6.5 $ 720.00
80AEVFD with a 1/4" Tapped Hole on the Inlet Side
80BEVFD with 1/4" Tapped Holes on Both Ends
1" 7981E 1.2 36 $ 59.14
1" 7971E 1 36 $ 67.45
Stainless Poppet & Guide
2” 4034ESVFD 80 3.0 16 $ 187.00 1" 7981EVFD 1.2 36 $ 65.25
1" 7971EVFD 1 36 $ 71.00
21/2 " 4035ESVFD 80 6.5 $ 792.00 11/4 ” 7983E 1.5 36 $ 82.34
11/4 " 7972E 1.5 36 $ 83.60
3" 4036EVFD 80 13 $ 880.00 11/4 ” 7983EVFD 1.5 36 $ 87.31
11/4 " 7972EVFD 1.5 36 $ 87.26
4" 4037EVFD 80 24 $1,530.00 80XAEVFD with a 1/4" Tapped Hole on the Outlet Side 11/2 " 7973E 2.3 25 $ 107.35
*Not for horizontal, see 4035ESVFD & 4034ESVFD. SIZE PART NO. WGT. CASE QTY. LIST PRICE 11/2 " 7973EVFD 2.3 25 $ 113.05
1" 7982E 1.2 36 $ 61.99 2"* 7974E* 2.9 16 $ 170.00
1" 7982EVFD 1.2 36 $ 65.25 *non VFD design
11/4 ” 7983E 1.5 36 $ 82.94 Note: 2 1⁄2” & larger are recommended for vertical applications.
11/4 ” 7983EVFD 1.5 36 $ 87.31
*non VFD design
Note: 2 1⁄2” & larger are recommended for vertical applications.
80CEVFD Discount Code A 80XBEVFD Discount Code A 100MEVFD Discount Code A

W!
W!
NE
NE
®
80CEVFD-ENVIRO CHECK® - Body casting unleaded bronze 80XBEVFD-ENVIRO CHECK - Body casting unleaded 100MEVFD-ENVIRO CHECK® - Body casting unleaded
with threaded female x female connection. The valve features a bronze with threaded female x female connection. The valve fea- bronze with threaded male x female connection. The valve fea-
high strength patented guide, poppet and spring with a NITRILE tures a high strength patented guide, poppet and spring with a tures a high strength patented guide, poppet and spring with a
(Buna-N) seal. Control center with four tapping; one 1/8" inlet NITRILE (Buna-N) seal. This valve has two ¼” tapped holes on the NITRILE (Buna-N) seal.
side, two 1/4" outlet sides, one 1/8" outlet side with a brass plug. outlet side for pressure switch and gauge. Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071EVFD .7 50 $ 59.49
1" 4061EVFD 1.2 36 $ 71.21 1" 7961EVFD 1.2 36 $ 71.21
11/4 " 4062EVFD 1.8 36 $ 92.11 11/4 "M x 1"F 4221EVFD 1.4 50 $ 54.54
11/4 " 7963EVFD 1.6 36 $ 92.11
11/2 " 4063EVFD 2.7 25 $ 117.12 11/4 "M x 11/4 "F 4242EVFD 1.5 50 $ 79.45
11/2 " 7964EVFD 2.8 25 $ 117.12
2”* 4064E* 3.1 16 $ 189.88 11/2 "M x 11/4 "F 4223EVFD 1.5 36 $115.00
2”* 7965E* 3.2 16 $ 189.88
21/2 "* 4065E* 6.3 $ 835.00
*non VFD design
*non VFD design
Note: 2 1⁄2” are recommended for vertical applications.
New NSF/ANSI 61
VFD Features & Benefits
Certified Valves
• Lower Friction Loss • Patented Design
• Noiseless Operation • 5 Year Warranty
• Stainless Steel Internal Optional • Optional SS or Ductile Iron Body
2
®
Flomatic Submersible
Pump Check Valve
Patented Design
MODEL 80DI-VFD SERIES

With Stainless Steel Guiding (2”-8”) Additional sizes and models,
see website for additional listings.
Materials
DUCTILE IRON CHECK VALVES 800.833.2040
Features & Benefits

• 20% - 30% lower Friction Loss • Valve body: Ductile Iron or 316SS (see page 7)
• Noiseless Operation • Valve Guide: 316 Stainless Steel (2” & 21/2” optional)
• Strong Ductile Iron Valve Body (SS see page 7) • Follower: Ductile Iron or 316SS (see page 7)
• Corrosion Resistant Internal Components • Disc: Buna-N Nitrile (FDA approved)
• Longer pipe threads with lead-In section • Spring: 316 Stainless Steel
• Longer thread area (8 round optional) The
• Optional “Break-Off” Plug
• NSF/ANSI 61 approved
Heavyweight
Made in U.S.A.
Champ
80MDW-VFD Discount Code A 80DI-VFD Discount Code A 80DI8R-VFD Discount Code A

W!
NE
80MDW-VFD DEEP WELL® - Epoxy coated carbon steel 80DI-VFD - High strength epoxy coated ductile iron patented 80DI8R-VFD - 8 Round Short Threads High strength
male inlet x female outlet body. Metal to metal seat with stainless body, poppet and guide with threaded female x female NPT con- epoxy coated ductile iron patented body, poppet and guide with 8
steel spring and stem with 8 Round or 8 Round short threads. nection. Features a NITRILE (Buna-N) seal. Designed for vertical round short thread connection. Features a NITRILE (Buna-N) seal,
or horizontal applications. with stainless steel shaft and a ductile iron poppet. Designed for
Temp Max: 180°F Body Pressure Max: 4,400 PSI vertical or horizontal applications.
(API J55 tubing) Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
23/8" 7937MDW8EU* 8 $ 1,155.00

Short Threads - consult factory for standard threads
Stainless Poppet & Composite guide
27/8" 7936MDW8EU* 12.5 $ 1,365.00 1” 4031DIVFD 0.8 50 $ 37.00
SIZE PART NO. WGT. LIST PRICE
31/2" 7938MDW8EU* 19.5 $ 1,575.00 11/4 " 4032DIVFD 1.3 36 $ 51.00 3" 7938-1VFD 16 $ 950.00
41/2" 7939MDW8EU* 37 $ 2,310.00 11/2" 4033DIVFD 2.5 25 $ 72.00 4" 7939-1VFD 47 $ 1,030.00
41/2" 79391MDW8SL** 40 $ 2,310.00 2"* 7937VFD* 4 16 $ 136.00 6" 4089-1VFD 70 $ 2,325.00
5" 79402MDW8SL** 34 $ 2,310.00 21/2 "* 7936VFD* 9 1 $ 310.00 8" 4090-1VFD 99 $ 3,989.00
51/2" 4088MDW8SL** 45 $ 4,410.00
65/8" 4089MDW8SL** 68 $ 5,460.00
* not for horizontal installation. See 7937SVFD & 7936SVFD below
To order break-off plug, add “PLG” to part number and add
7" 4090MDW8SL** 113 $ 7,350.00
Stainless Poppet & Stainless Guide $100.00 to list price, $75.00 added for composite plug installed
75/8" 4091MDW8SL** 90 $ 8,925.00 2” 7937SVFD 4 16 $ 149.00 and add “PPLG” to end of part number.
85/8" 4092MDW8SL** 99 $10,500.00 21/2 " 7936SVFD 9 1 $ 341.00
95/8" 4093MDW8SL** 154 $ 12,600.00 Stainless Stem & ductile iron poppet and guide
3” 7938VFD 16 1 $ 455.00
* OD 8rd EU (External-Upset) Tubing flomatic vfd
4” 7939VFD 47 1 $ 700.00
** OD 8rd Male end short casing x female end long casing
To order break-off plug, add “PLG” to part number and add 5” 4088VFD 49 1 $ 1,300.00
$100.00 to list price. 6” 4089VFD 70 1 $ 1,600.00
8” 4090VFD 98 1 $ 2,800.00
To order break-off plug, add “PLG” to part number and add

$100.00 to list price, $75.00 added for composite plug installed
and add “PPLG” to end of part number.
www.flomatic.com 3 High Quality Valves Built to Last...

80DI Discount Code A 80DIX Discount Code A 80DI8R Discount Code A
DUCTILE IRON CHECK VALVES 800.833.2040

80DI- High strength epoxy coated ductile iron body, disc and 80DIX- High strength epoxy coated ductile iron body features a 80DI8R-8 Round Short Threads - High strength epoxy
follower with threaded female x female connection. Features a double-guided ductile iron poppet. Designed for vertical and hori- coated ductile iron body, disc and follower with threaded female x
NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile zontal applications. female 8 round short connection. Features a NITRILE (Buna-N)
iron poppet. 21/2" and larger are designed for vertical applica- Temp Max: 180°F (80C) Pressure Max: 400 PSI seal, stainless steel spring fasteners and ductile iron poppet.
tions. See 80DIX or VFD design for horizontal. Designed for vertical applications.
Note: 1" through 11/2" features acetal poppet. SIZE PART NO. WGT. LIST PRICE
3" 7938DIX 13 $ 360.00
Pressure Max: 400 PSI 1”–11/2"
4" 7939DIX 17 $ 565.00
Temp Max: 180°F (80C) Short Threads - consult factory for standard threads
600 PSI 2”-8” 6" 4089DIX 51 $ 1,025.00 SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. CASE QTY. LIST PRICE 8" 4090DIX 89 $ 2,600.00 3" 7938-1 15 $ 500.00
10" 4091DIX 150 $ 3,900.00 4" 7939-1 25 $ 750.00
1" 4031DI 1 50 $ 31.75
12" NEW 4092DIX 350 $ 8,300.00 5" 4088-1 46 $ 1,400.00
11/4 " 4032DI 1.6 36 $ 44.15
11/2" 4033DI 2.4 25 $ 60.33 6" 4089-1 66 $ 1,700.00
2"* 7937* 4 16 $ 113.12
To order with break-off plug, replace “DIX” with “XPL” in part 8" 4090-1 93 $ 3,000.00
21/2" 7936 9 $ 270.00
number and add $100.00 to list price of valve, $75.00 added
3" 7938 12 $ 380.00

for composite plug installed and add “XPPLG” to end of part To order with break-off plug, add “PLG” to part number for 3"-
4" 7939 26 $ 590.00

number. 8" and add $100.00 to list price of valve, $75.00 added for
5" 4088 46 $ 1,096.00

composite plug installed and add “PPLG” to end of part number.
See 80DI or 80DIVFD for high capacity flow.
6" 4089 61 $ 1,361.00
8" 4090 93 $2,400.00
*Longer body with stainless steel seat, use break off plug 100MDI Discount Code A BREAK-OFF PLUG Discount Code A
76098-2.
To order break-off plug, add “PLG” to part number for 2”-8”
and add $100.00 to list price, $75.00 added for composite plug
installed and add “PPLG” to end of part number.
100MDI- High strength epoxy coated ductile iron valve features BREAK-OFF PLUG- Stainless steel 304 construction. Threaded
male threaded inlet and female threaded outlet. Ideal for to install into valve. When broken off, riser pipe drains.
submersible pumps. Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. BREAK OFF PLUG LIST PRICE
SIZE PART NO. WGT. LIST PRICE 2" 76098-2 1/4" $ 64.00
11/4 "M x 1"F 4221LDI 1 $ 25.98 2 1/2" 76098-3 3/8" $ 67.00
2"M x 2"F* 4084VFD* 4.5 $ 212.00 3" 76098-6 3/8" $ 67.00
4" 76098-7 3/8" $ 67.00
5"–8"* 76098* 3/8" $ 67.00
*VFD design
80DIA A 80DIB A
10"&12"* 76098-12* 3/8" $ 77.00
Discount Code Discount Code 8" 76098-8 1/2" $ 75.00
10"&12" 76098-11 1/2" $ 86.00
*After 2014, the 8”-12” valve plug hole increased from 3/8" to 1/2"
COMPOSITE
BREAK-OFF PLUG Discount Code A
80DIA- Standard high strength epoxy coated ductile iron body 80DIB- Standard high strength epoxy coated ductile iron body
with 1/8" tapped hole on the inlet side. with 1/8" tapped hole on inlet side and 1/4" tapped hole on the
outlet side.
Note: 1" through 11/2" features acetal poppet.
Note: 1" through 11/2" features acetal poppet.
1" 4041DI 1 50 $ 44.30
SIZE PART NO. WGT. CASE QTY LIST PRICE
11/4 " 4042DI 1.6 36 $ 56.20 1" 4051DI 1 50 $ 44.30 COMPOSITE BREAK-OFF PLUG- Threaded 3/8" to install
11/2 " 4043DI 2.4 25 $ 73.17 11/4 " 4052DI 1.6 36 $ 56.20 into valve. When broken off, riser pipe drains.
2" 4044DI 5 16 $ 121.72 11/2 " 4053DI 2.4 25 $ 73.17 Temp Max: 180°F (80C) Pressure Max: 600 PSI
21/2 "* 4045DI 7 $ 352.66 2" 4054DI 5 16 $ 121.72
3"* 4046DIX* 10 $ 454.61 21/2"* 4055DI 7 $ 352.66
3"–6" 76098P .1 $ 23.00
4"* 4047DIX* 19 $ 585.80 3"* 4056DIX* 10 $ 454.61
4"* 4057DIX* 19 $ 585.80 * One size fits all break-off is for 6” size valves and marked
* 80DIX double guided poppet. Can be installed vertical
* 80DIX double guided poppet. Can be installed vertical where to cut for smaller 3” & 4” size valves.
or horizontal.
or horizontal.
4
80DI Turbo Discount Code A 80MDI-VFD Discount Code A 80DICLVFD Discount Code A
80DI Turbo- Patented high efficiency ductile iron check valve. 80MDI-VFD- High strength epoxy coated ductile iron body, 80DICLVFD- Ductile iron check valve incorporates grooved lock-
Threaded female x female connection. High strength ductile iron high strength poppet and guide with threaded male x female NPT ing type pipe connections called Certa-Lok®. Fusion epoxy coated
body and poppet, stainless steel spring and screws, stainless steel connection. Features a NITRILE (Buna-N) seal, stainless steel shaft, inside and out including poppet assembly, this valve is corrosion
shaft and with a NITRILE (Buna-N) Seal Disc. (No “O”-Ring Seals) and ductile iron poppet. Designed for vertical or horizontal appli- resistant and unleaded. High strength ductile iron body with stain-
cations. Full ported valve. less steel spring and NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 600 PSI Also available in all 316SS, Model 80S6CLVFD. See Page 10.
DUCTILE IRON CHECK® VALVES 800.833.2040

10" 4091T 155 $ 6,500.00
SIZE PART NO. WGT. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 400 PSI
11/4"M x 1"F 4221DIVFD 1 $ 30.00 SIZE PART NO. WGT. LIST PRICE
11/4"M x 11/4"F 4242DIVFD 1.2 $ 43.00 2"* 7937CLVFD* 2.5 $ 300.00
2"M x 2"F* 4084VFD* 4 $ 212.00 2" 7937CLSVFD 2.5 $ 330.00
82DI-VFD A
2"M x 2"F 4084SVFD 4 $ 233.00 3"* 7938CLVFD* 10 $ 365.00
Discount Code 3"M x 3"F 4083VFD 14 $ 400.00 3" 7938CLSVFD 10 $ 400.00
4"M x 4"F 4077VFD 22 $ 565.00 4" 7939CLVFD 27 $ 560.00
5"M x 5"F 4075VFD 23 $ 990.00 5" 4088CLVFD 32 $ 975.00
6"M x 5"F 4087VFD 48 $ 1,029.00 6" 4089CLVFD 47 $ 1,500.00
6"M x 6"F 4081VFD 50 $ 1,140.00 8" 4090CLVFD 90 $ 2,400.00
To order with break-off plug, add “PLG” to part number for
2”-6” and add $100.00 to list price of valve, $75.00 added for 80MDICLVFD- Ductile iron check valve uses groove lock type
composite plug installed and add “PPLG” to end of part number. pipe connection on outlet end, and male pipe thread for the inlet
connection. Materials are the same as the 80DICLVFD.
*Not for horizontal installation, see 4084SVFD.
2"* 7937MCLVFD* 2.5 $ 300.00
82DI-VFD - High strength epoxy coated ductile iron body, 2" 7937MCLSVFD 2.5 $ 330.00
poppet and stainless steel guide with threaded male x male con- 3"* 7938MCLVFD* 10 $ 365.00
3" 7938MCLSVFD 10 $ 400.00
nection. Features a NITRILE (Buna-N) seal, stainless steel shaft,
4" 7939MCLVFD 27 $ 560.00
and ductile iron poppet. Designed for vertical or horizontal appli-
5" 4088MCLVFD 32 $ 975.00
cations.
Temp Max: 180°F (80C) Pressure Max: 600 PSI 100% Fusion Bonded Epoxy 6" 4089MCLVFD 47 $ 1,500.00
coated with NSF/ANSI 61 8" 4090MCLVFD 90 $ 2,400.00
2"M x 2"M* 4093VFD* 3 $ 182.76 Certa-Lok® is a registered trademark with North American
2"M x 2"M 4093SVFD 3 $ 201.00 approved powder with quality Specialty Products.
3"M x 3"M* 4094VFD* 6 $ 352.00
3"M x 3"M 4094SVFD 6 $ 387.00 coating operation. To order with break-off plug, add “PLG” to part number and
4"M x 4"M 4095VFD 12 $ 567.00

add $100.00 to list price of valve, $75.00 added for composite
5"M x 5"M 4096VFD 27 $ 869.00

plug installed and add “PPLG” to end of part number.
6"M x 6"M 4097VFD 40 $ 1,841.00 *Not for horizontal installation. See 7938CLSVFD, 7938MCLSVFD,
8"M x 8"M 4098VFD 63 $ 2,455.00 7937CLSVFD or 7937MCLSVFD.
82DP (replaces 82) A 80 Slim Line® A

To order with break-off plug, add “PLG” to part
number and add $100.00 to list price of valve, $75.00 added
for composite plug installed and add “PPLG” to end of part Discount Code Discount Code
number.
* Not for horizontal installation, see 4094SVFD & 4093SVFD.
82DP- Dual purpose compact ductile iron reduced ported check 80SL Slim Line® - Epoxy coated carbon Steel threaded valve
valve with male and female threads on both ends. High strength body with all 316 stainless steel internals. Nitrile nylon seal fea-
ductile iron body and poppet, with stainless steel spring and tures a small OD body dimension.
fasteners. Designed to fit into tight fitting wells.
Temp Max: 200°F Pressure Max: 450 PSI
2" 7937SL 5 $ 575.00
21/2"F & 3" M* 4094DP* 7 $ 328.00 3" 7938SL 8 $ 705.00
3" F & 4" M 4095DP 10 $ 415.00 4" 7939SL 18 $ 1,083.00
4" F & 5" M 4096DP 25 $ 785.00 5" 4088SL 21 $ 1,700.00
5" F & 6" M 4097DP 51 $ 1,200.00 6" 4089SL 36 $ 2,550.00
8" 4090SL 64 $ 4,322.00
www.watersystemscouncil.org
Same valve as 82, extra female (internal) threads.
Note: RESTRICTED FLOW - REDUCED PORTED, SEE VFD MODEL FOR FULL
PORTED, HIGH FLOW DESIGN.
* Unleaded Bronze Poppet

80SS/100SS Discount Code A 100MSS Discount Code A 100MSSVFD Discount Code A
STAINLESS STEEL CHECK VALVES 800.833.2040

80SS 100SS
80SS/100SS - All 303 stainless steel one piece body. Stainless steel 100MSS - All 303 stainless steel body, threaded male x 100MSSVFD - All 304 stainless steel male x female threaded
spring with a NITRILE (Buna-N) seal. Threaded female x female connection. female connection. Features a high strength delrin poppet, stain- check valve body features patented VFD design with stainless steel
Temp Max: 180°F (80C) Pressure Max: 400 PSI less steel spring with a NITRILE (Buna-N) seal. spring, delrin poppet and a NITRILE (Buna-N) seal.
SIZE PART NO. STYLE WGT. CASE QTY. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
1" 4031SS2 80 1 50 $ 49.50 SIZE PART NO. CASE QTY. LIST PRICE Composite Poppet & Guide
1" 4201SS2 100 1 50 $ 49.50 3/ "M
4 x 3/4"F* 4218SS* 100 $ 93.11
1" 4201LSS2 100 1 50 $ 57.20
1"M x 1" F 4220SS2VFD 50 $ 63.16 1"M x 1" F 4220SS2VFD 1 50 $ 63.16
11/4 " 4202SS2 100 2 36 $ 69.77 11/4"M x 1"F 4221LSS2 50 $ 51.00 11/4"M x 1"F 4221SS2 VFD 1.4 50 $ 63.70
11/4 " 4032SS2 80 2 36 $ 73.30
11/4"M x 11/4"F 4242SS2 50 $ 63.63 11/4"M x 11/4"F 4242SS2VFD 1.6 50 $ 76.00
11/2 " 4033SS2 80 2 25 $ 94.99
2" 4034SS2 80 3 16 $154.73 11/4"M x 11/4"F 4242LSS2 50 $ 65.50 11/2"M x 11/4"F 4223SS2VFD 1.7 36 $ 101.00
* Made from bar stock, with a viton seal

100SSVFD - All 304 stainless steel female x female threaded valve
body features patented VFD design with stainless steel spring,
delrin poppet with a NITRILE (Buna-N) seal.
80SSXBVFD A
1" 4201SS2VFD 1 50 $ 59.00 Discount Code
11/4 " 4202SS2VFD 2 36 $ 83.00
11/2 " 4203SS2VFD 2 36 $ 114.00
W!
For SS poppet, add “S” between 2 and V of the part number and
NE
add 10%.
80SSAVFD Discount Code A 80SSBVFD Discount Code A

W!
W!
NE
NE
80SSXBVFD - All 304 stainless steel female x female thread-

ed check valve body features a high strength patented guide with
stainless steel spring, delrin poppet and a NITRILE (Buna-N) seal.
This valve has two ¼” tapped holes on the outlet side for pressure
switch and gauge.
80SSVFD WITH A TAPS - All 304 stainless steel female x 80SSBVFD - All 304 stainless steel female x female threaded SIZE PART NO. WGT. CASE QTY. LIST PRICE
female threaded check valve body features a high strength patent- check valve body features a high strength patented guide with 1" 7961SS2VFD 1.2 36 $ 88.29
ed guide with stainless steel spring, delrin poppet and a NITRILE stainless steel spring, delrin poppet and a NITRILE (Buna-N) seal. 11/4 " 7963SS2VFD 1.6 36 $ 115.53
(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on the This valve has two drilled and tapped holes; 1/8" inlet side and 11/2" 7964SS2VFD 2.3 25 $ 150.42
1/4"outlet side.
inlet side.
80SSCVFD A
80SSAVFD with a 1/8" Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE Discount Code
1" 4051SS2VFD 1 36 $ 82.51
11/4 " 4052SS2VFD 1.5 36 $ 107.97
1" 4041SS2VFD 1.2 36 $ 75.61 11/2" 4053SS2VFD 2.3 25 $ 140.58
W!
11/4 " 4042SS2VFD 1.5 36 $ 101.53 2”* 4054SS2* 2.9 16 $ 207.00

NE
11/2 " 4043SS2VFD 2.4 25 $ 134.96

2”* 4044SS2* 3 16 $ 201.00 80SSBVFD with 1/4" Tapped Holes on Both Ends
80SSAVFD with a 1/4 " Tapped Hole on the Inlet Side
1" 7971SS2VFD 1 36 $ 82.51
SIZE PART NO. WGT. CASE QTY. LIST PRICE 11/4 " 7972SS2VFD 1.5 36 $ 107.97
11/2 " 7973SS2VFD 2.3 25 $ 140.58
1" 7981SS2VFD 1.2 36 $ 75.61
2”* 7974SS2* 2.9 16 $ 207.00
80SSCVFD - All 304 stainless steel female x female threaded
11/4 ” 7983SS2VFD 1.5 36 $ 101.53 check valve body features patented VFD design with stainless steel
11/2” 7985SS2VFD 2.4 25 $ 134.96 spring, delrin poppet and a NITRILE (Buna-N) seal. Control Center
2”* 7987SS2* 3 16 $ 201.00
80SSBVFD with 1/8" Tapped Holes on Both Ends
with four tapping; one 1/8" inlet side, two ¼” outlet sides, one 1/8"
SIZE PART NO. WGT. CASE QTY. LIST PRICE outlet side with a SS plug.
80SSAVFD with a 1/8" Tapped Hole on the Outlet Side 1" 7951SS2VFD 1 36 $ 82.51
11/4 " 4052SS2VFD 1.5 36 $ 107.97
1" 8981SS2VFD 1.2 36 $ 75.61 11/2 " 7953SS2VFD 2.3 25 $ 140.58
2”* 7954SS2* 2.9 16 $ 207.00 1" 4061SS2VFD 1.2 36 $ 88.29
11/4 ” 8982SS2VFD 1.5 36 $ 101.53
*Non VFD design 11/4 " 4062SS2VFD 1.8 36 $ 115.53
11/2” 8983SS2VFD 2.4 25 $ 134.96
2"* 8984SS2* 3 16 $ 201.00
80SSXAVFD with a 1/4 " Tapped Hole on the Outlet Side

1" 7982SS2VFD 1.2 36 $ 75.61
11/4 ” 7984SS2VFD 1.6 36 $ 101.53
11/2” 7986SS2VFD 2.4 25 $ 134.96
www.flomatic.com
2”* 7988SS2* 3 16 $ 201.00
*Non VFD design 6
80S6 Discount Code A 80S6VFD Discount Code A 82S6VFD Discount Code A
80S6 - All 316 stainless steel threaded check valve body. 80S6VFD - All 316 stainless steel female x female threaded 82S6VFD - All 316 stainless steel threaded male x male check
Stainless steel spring, poppet and a Viton seal, (Buna-N) optional. check valve body features patented VFD design with stainless steel valve body features patented VFD design with stainless steel
spring, poppet and a NITRILE (Buna-N) seal, Viton optional. spring, poppet and a NITRILE (Buna-N) seal.

1" 4031S6 1.1 $ 85.85
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
1"* 4031S6VFD* 1 $ 100.00 2"M x 2"M 4093S6VFD 4 $ 925.00
11/4 " 4032S6 1.4 $ 129.28
11/4"* 4032S6VFD* 1.3 $ 150.00 3"M x 3"M 4094S6VFD 6 $ 1,030.00
11/2 " 4033S6 2.7 $ 167.66
11/2 "* 4033S6VFD* 2.5 $ 200.00 4"M x 4"M 4095S6VFD 12 $ 1,250.00
2" 4034S6 4.0 $ 244.48
2" 4034S6VFD 5 $ 300.00 5"M x 5"M 4096S6VFD 27 $ 1,900.00
3" 7938S6 10 $ 851.23
21/2 " 7936S6VFD 10 $ 629.00 6"M x 6"M 4097S6VFD 40 $ 4,200.00
4" 7939S6 25 $ 1,316.00
3" 7938S6VFD 13 $ 1,100.00 8"M x 8"M 4098S6VFD 63 $ 5,600.00
6" 4089S6 65 $ 4,287.00
4" 7939S6VFD 30 $ 1,600.00
8" 4090XSS 90 $ 6,703.00
5" 4088S6VFD 42 $ 3,000.00
10" 4091XSS 170 $11,950.00
6" 4089S6VFD 69 $ 4,900.00 To order Model 82S6VFD with break-off plug, add “PLG” to part number
To order Model 80S6 with break-off plug, add “PLG” to part number for 8" 4090XSSVFD 95 $ 7,895.00 for 3”- 8” and add $100.00 to list price on valve above, $75.00 added for
2”- 10” and add $100.00 to list price on valve above, $75.00 added for To order Model 80S6VFD with break-off plug, add “PLG” to part number composite plug installed and add “PPLG” to end of part #.
composite plug installed and add “PPLG” to end of part #. for 2”- 8” and add $100.00 to list price on valve above, $75.00 added for
composite plug installed and add “PPLG” to end of part #.
* Composite guide
80S6CLVFD Discount Code A 80S6MCLVFD Discount Code A 80MS6VFD Discount Code A
80S6CLVFD - Stainless steel check valve incorporates grooved 80S6MCLVFD - Stainless steel check valve uses grooved locking 80MS6VFD - All 316 stainless steel threaded male x female
locking type pipe connections called Certa-Lok®. Stainless steel type pipe connection on outlet end and male pipe thread for the check valve body features patented VFD design with stainless steel
inside and out including poppet assembly. High strength stainless inlet connection. Materials are the same as the 80S6CLVFD. Also spring, poppet and a NITRILE (Buna-N) seal.
steel body and spring with a NITRILE (Buna-N) seal. Also avail- available in ductile iron. See Page 5.
able in ductile iron. See Page 5.
2"M x 2"F 4084S6VFD 5 $ 400.00
Temp Max: 180°F (80C) Pressure Max: 450 PSI SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 2" 7937S6MCLVFD 4 $ 950.00 3"M x 3"F 4083S6VFD 13 $ 1,035.00
2" 7937S6CLVFD 4 $ 950.00 3" 7938S6MCLVFD 10 $ 1,030.00 4"M x 4"F 4077S6VFD 30 $ 1,820.00
3" 7938S6CLVFD 10 $ 1,030.00 4" 7939S6MCLVFD 27 $ 1,250.00 6"M x 6"F 4081S6VFD 69 $ 4,900.00
4" 7939S6CLVFD 27 $ 1,250.00 5" 4088S6MCLVFD 32 $ 1,900.00
5" 4088S6CLVFD 32 $ 1,900.00 6" 4089S6MCLVFD 47 $ 4,200.00
To order Model 80S6MVFD with break-off plug, add “PLG” to part number
6" 4089S6CLVFD 47 $ 4,200.00 8" 4090S6MCLVFD 90 $ 5,600.00
for 2”- 6” and add $100.00 to list price on valve above, $75.00 added for
8" 4090S6CLVFD 90 $ 5,600.00
Certa-Lok® is a registered trademark with North American Specialty Products.
Certa-Lok® is a registered trademark with North American Specialty Products. Reverse combination available on the inlet side & male on outlet.
100XLSS A
To order Model 80S6CLVFD with break-off plug, add “PLG” to part number To order Model 80S6MCLVFD with break-off plug, add “PLG” to part number
for 3”- 8” and add $100.00 to list price on valve above, $75.00 added for for 3”- 8” and add $100.00 to list price on valve above, $75.00 added for
Discount Code
ALL CHECK VALVES AVAILABLE

WITH “DRAIN BACK” FEATURE
HOLE DRILLED INTO CHECK
VALVES, CONSULT FACTORY
100XLSS - All 303 stainless steel. Hex shaped for easy wrench-
ing, this valve features a non-spin acetal poppet, with a NITRILE
flomatic vfd (Buna-N) seal and stainless steel spring. Features extra long
threads for special bell end PVC pipe, with threaded male x female
connection.
1"M x 1" F 4201XLSS2 1 36 $ 66.31
11/4 "M x 11/4 "F 4242XLSS2 1.5 36 $ 81.61
7
How to Order Ward Valve

1 - THREADED N.P.T.
2 - SOCKET WELD SCH. 80 add 10%
3 - BUTT WELD SCH. 80 add 10%
4 - FLANGED END 150# CLASS
5 - BSPP
6 - PN 10
1 - 316 STAINLESS STEEL

2 - WCB STEEL - (carbon steel)
3 - ALLOY 20
4 - MONEL
5 - HASTELLOY C
01 - PTFE AND SEAL

02 - METAL SEAT GRAPHITE SEAL add 10%
03 - STRAINER TEFLON CAP SEAL add 5%
04 - STRAINER GRAPHITE CAP SEAL add 5%
00 - STANDARD
01 - SCH. 40 WELD ENDS
02 - SCH. 5 WELD ENDS
03 - DEGREASING add 20%
05 - TEFLON COATED
07 - NON STANDARD CRACK PRES.
816 Discount Code B 816FL Discount Code B 816HS Discount Code B
816- All 316 stainless steel threaded FNPT “Y-Type” check valve. 816FL- All 316 stainless steel flanged “Y-Type” check valve. 816HS- Same body as Model 816 with heavy spring for higher
Patented Spring loaded, Teflon® soft-seated plunger with all Patented Spring loaded, Teflon® soft-seated plunger, optional cracking pressure.
316SS internals. encapsulated spring, with all 316SS internals. SIZE PART NO. CRACKING PRESSURE LIST PRICE
Temp Max: 450°F (230C)* Pressure Max: 600 PSI* Temp Max: 450°F (230C)* Pressure Max: 600 PSI* 1” YV001110107-08 8 PSI $345.00
X=1 FOR STAINLESS X=2 FOR CARBON X=1 FOR STAINLESS X=2 FOR CARBON 1” YV001110107-10 10 PSI $345.00
STAINLESS CARBON STAINLESS CARBON 1” YV001110107-15 15 PSI $345.00
SIZE PART NO. WGT. LIST PRICE LISTPRICE SIZE PART NO. WGT. LIST PRICE LIST PRICE 1” YV001110107-20 20 PSI $345.00
1/ "
4 YV2501-X-0100 1 $ 210.00 $ 190.00 1" YV0014-X-0100 5.5 $ 630.00 $ 571.00 1” YV001110107-30 30 PSI $345.00
3/ "
8 YV3751-X-0100 1 $ 210.00 $ 190.00 11/4 " YV1254-X-0100 8 $ 791.00 $ 676.00
11/2" YV0154-X-0100 10 $ 937.00 $ 779.00
Consult factory for pricing and other sizes and body materials.
1/ " YV5001-X-0100 1 $ 215.00 $ 190.00
2
3/ " YV7501-X-0100 1 $ 275.00 $240.00 2" YV0024-X-0100 15 $1,200.00 N/A
*Note: the last 2 digits are the weight of the spring.
4
1" YV0011-X-0100 2 $ 310.00 $300.00 Consult factory for pricing and other sizes and body materials.
11/4 " YV1251-X-0100 4 $ 435.00 $404.00
11/2" YV0151-X-0100 4 $ 495.00 $420.00
* Pressure & temp dependent see website.
2" YV0021-X-0100 7 $ 733.00 $645.00

Consult factory for pricing and other end connections and
body material options. OUR WEBSITE NOW FEATURING:
VISIT
* Pressure & temp dependent see website.
UPDATED
PRODUCT
OUR WEB
LIVE 3D SHIPMENT APPROVAL
CHAT ANIMATIONS TRACKING
FLOMATIC VALVES IS AN ACTIVE MEMBER IN
SITE AT
THESE INDUSTRY ASSOCIATIONS AND OTHERS
www.flomatic.com www.watersystemscouncil.org
High Quality Valves Built to Last... 8 www.flomatic.com

812X Discount Code B 888S6R/888S6 Discount Code B 888S6VFD Discount Code B
W!
NE
Patented
812X WAFER STYLE CHECK VALVE- All 316 stainless 888S6R/888S6- Patented design, all 316 stainless steel 888S6VFD- 316 stainless steel VFD design with a 316 Stainless
steel, wafer connection ANSI 150/300. Metal to metal seating body. Wafer connection ANSI 150#/300#, 2”- 6”. Drip tight seal- steel guide and seat with EPDM Elastomer disc standard, patent
on 812X model. ing. For metal to metal seating use 888S6 and NSF/ANSI 61 and pending. Wafer connection ANSI 150#/300#.
Temp Max: -20° F (-30C) to 660° F (350C)* 372 approved.
Pressure Max: Metal Seating 600 PSI* Temp Max: 180°F (80C)
NSF/ANSI 61 Certified by IAPMO R&T, 2”-8” Temp Max: 180°F (80C) Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300#
812X - No Flange Face Seal Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300# SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 2" 2434S6VFD 5 $ 532.00
21/2 " 2432S6VFD 7 $ 617.00
888S6R EPDM standard - seal drip tight
1/ " 2420X .2 $ 89.00
2
3/ " 2421X .3 $ 118.00 3" 2435S6VFD 11 $ 745.00
4
2" 2434S6R 5 $ 484.00 4" 2436S6VFD 18 $ 1,022.00
1" 2422X .5 $ 138.00
21/2 " 2432S6R 7 $ 561.00 5" 2433S6VFD 25 $ POA
11/4 " 2423X .7 $ 182.00
3" 2435S6R 11 $ 678.00 6" 2437S6VFD 36 $ 1,623.00
11/2 " 2424X 1.4 $ 269.00
4" 2436S6R 18 $ 930.00 8"* 2438S6VFD* 80 $ 2,817.00
2" 2425X 2.3 $ 313.00
6" 2437S6R 36 $ 1,475.00 10" 2439S6VFD 129 $ POA
21/2 " 2426X 3.9 $ 372.00
8"* 2438S6R* 80 $ 2,561.00
3" 2427X 5.4 $ 472.00
8"** 2438S6R2 80 $ 2,999.00
* ANSI 150#
4" 2428X 7.8 $ 629.00
5" 2429X 20 $ 2,305.00 888S6 optional - Metal to Metal seat not drip tight
6" 2430X 32 $ 2,909.00
8"** 2431X** 67 $ 5,050.00
402S6R/402S6 B
8" 2432X 64 $ 5,500.00 2" 2434S6 5 $ 440.00
21/2 " 2432S6 7 $ 510.00 Discount Code
3" 2435S6 11 $ 616.00
*Consult factory for temp. & pressure rating. **230 PSI Max
4" 2436S6 18 $ 845.00
812XT B
6" 2437S6 36 $ 1,341.00
Discount Code 8"* 2438S6* 80 $ 2,328.00
8"** 2438S6-2 80 $ 2,726.00
Note: 2''- 6'' are dual rated to fit between both ANSI class 150# &
300# flanges.
* ANSI 150# only
For viton seal add 20% to 888 list price
** 300# Flanged Dimensions
402S6R/402S6- 316 stainless steel body. Flanged connection
NSF/ANSI 61
ANSI class 150# connection. Metal to metal seating with a stain-
812XT- All 316 stainless steel, threaded 3 piece check valve and less steel spring. NSF/ANSI 61 and 372 approved (2”-12”).
Certified Valves
body. Metal to metal seating, teflon O-ring. 1 1/2"–8" available Temp Max: 180° F (80C)
with NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6" Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-18"
available with socket weld connection, add 25% to list.
402S6R EPDM standard - seal drip tight
Temp Max: Metal Seating only 400°F (200C)*
Pressure Max: 300 PSI* SIZE PART NO. WGT. LIST PRICE
2" 2239S6R 13 $ 1,000.00
21/2 " 2240S6R 18 $ 1,100.00
1/ " 2420XT .9 $ 125.00
2
3/ " 3" 2241S6R 23 $ 1,320.00
4 2421XT 1.5 $ 145.00 flomatic 888VFD
4" 2242S6R 40 $ 1,760.00
1" 2422XT 2.1 $ 179.00
6" 2244S6R 75 $ 3,190.00
11/4 " 2423XT 3.5 $ 271.00
8" 2245S6R 116 $ 4,950.00
11/2 " 2424XT 5.3 $ 350.00
12" 2248S6R 306 $ 14,300.00
2" 2425XT 7.5 $ 484.00
14" 2249S6R 380 $ POA
21/2 " 2426XT 19 $ 597.00
16" 2250S6R 500 $ POA
3" 2427XT 24 $ 868.00
18" 2251S6R 724 $ POA
4" 2428XT 38 $ 1,440.00
5" 2429XT 60 $ 2,585.00 402S6 optional - Metal to Metal seat not drip tight
6" 2430XT 77 $ 3,675.00
8"** 2431XT** 136 $ 6,134.00
2" 2239S6 13 $ 910.00
21/2 " 2240S6 18 $ 1,000.00
Note: Add V (Viton) or R (Buna-N) to part #.
*Consult factory for temp. & pressure rating. **230 PSI Max
3" 2241S6 23 $ 1,200.00
Also available with Socket Weld (XS) ends. 4" 2242S6 40 $ 1,600.00
6" 2244S6 75 $ 2,900.00
8" 2245S6 116 $ 4,500.00
Note: replacement for center part of valve. Consult factory
12" 2248S6 306 $ 13,000.00
www.flomatic.com
402BTR/402BT Discount Code B 402BTR2/402BT2 Discount Code B 888R/888 Discount Code B
CHECK VALVES 800.833.2040

402BTR/402BT- Cast iron body with epoxy coating. Flanged 402BTR2/402BT2- Cast iron body with epoxy coating. 888R/888- Patented design. Cast iron body with epoxy coat-
connection ANSI B16.1, class 125#. Metal to metal seating with Flanged connection ANSI B16.1, class 250. Metal to metal seating ing. Wafer connection ANSI 125#/250#. Drip tight sealing. For
stainless steel spring. NSF/ANSI 61 and 372 approved with stainless steel spring. metal to metal seating use 888. NSF/ANSI 61 and 372 approved.
(2”-12”). Note: For rubber seal NITRILE (Buna-N), add “R” to end For stainless steel trim add ST to end of part number
Note: For rubber seal EPDM, add “R” to end of part of part number and 10% to list price. and 25% to list. See picture on right.
number and 10% to list price. Temp Max: 180° F (80C) Temp Max: 180°F (80C)
Temp Max: 180° F (80C) Pressure Max: 400 PSI: 21/2"-12", 300 PSI: 14" & 16" Pressure Max: 200 PSI ANSI 125#, 400 PSI ANSI 250#
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24" SIZE PART NO. WGT. LIST PRICE
21/2 " 2240BT2 30 $ 825.00
888R Standard - EPDM drip tight seal
2" 2239BT 13 $ 340.00 3" 2241BT2 36 $ 875.00 SIZE PART NO. WGT. LIST PRICE
21/2 " 2240BT 18 $ 430.00 4" 2242BT2 59 $ 1,122.00 2" 2434R 5 $ 245.00
3" 2241BT 23 $ 480.00 5" 2243BT2 78 $ 1,391.00 21/2 " 2432R 7 $ 273.00
4" 2242BT 40 $ 625.00 6" 2244BT2 103 $ 1,838.00 3" 2435R 11 $ 282.00
5" 2243BT 51 $ 995.00 8" 2245BT2 179 $ 3,123.00 4" 2436R 18 $ 362.00
6" 2244BT 75 $ 1,040.00 10" 2247BT2 253 $ 4,484.00 5" 2433R 25 $ 631.00
8" 2245BT 116 $ 1,700.00 12" 2248BT2 401 $ 7,063.00 6" 2437R 36 $ 675.00
10" 2247BT 194 $ 2,500.00 14" 2249BT2 511 $ 9,750.00 8"* 2438R* 80 $ 1,184.00
12" 2248BT 306 $ 4,300.00 16" 2250BT2 697 $13,407.00 8"** 2438R-2** 85 $ 1,609.00
14" 2249BT 380 $ 7,100.00 10"* 2439R* 129 $ 1,897.00
16" 2250BT 500 $ 10,100.00
18" 2251BT 724 $ POA 888 optional - Metal to Metal seat not drip tight
B
20" 2252BT 890 $ POA
SPLIT DISC®
24" 2254BT 1220 $ POA Discount Code 2" 2434 5 $ 217.00
Note: optional 316SS seat trim available, add ST to end of part 21/2 " 2432 7 $ 243.00
number and 25% to list price. Consult factory. 3" 2435 11 $ 251.00
4" 2436 18 $ 327.00
888VFD B
5" 2433 25 $ 573.00
Discount Code 6" 2437 36 $ 600.00
8"* 2438* 80 $ 1,076.00
8"** 2438-2** 85 $ 1,488.00
10"* 2439* 129 $ 1,760.00
W!
NE
Note: 21/2"- 8'' are dual rated to fit between both ANSI class 125#
& 250# flanges, 2”, 3” & 10” Ductile Iron, ANSI 150#/300#,
SPLIT DISC - Cast iron body with epoxy coating and split disc
®
consult factory for other sizes.
design. Stainless disc with wafer connection ANSI 125# flange 2”- For viton seal add 20% to 888 list price
24” EPDM, PTFE bearing. Stainless steel spring hinge pin. Lifting ring * ANSI 150#
Patented std. above 4". ** 300# Flanged Dimensions
888VFD- Epoxy coated ductile iron VFD design with a 316
SIZE 895 PART NO. WGT. LIST PRICE
2" 3000 4
Stainless steel guide and seat with EPDM Elastomer disc standard,
$ 188.00
21/2 " 3001 6
patented. Wafer connection ANSI 150#/300#.
$ 219.00
3" 3002 7 $ 236.00
Temp Max: 180°F (80C)
4" 3003 12 $ 300.00
Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300#
SIZE PART NO. WGT. LIST PRICE 5" 3004 18 $ 500.00
2" 2434VFD 5 $ 257.00 6" 3005 20 $ 500.00
21/2 " 2432VFD 7 $ 286.00 8" 3006 35 $ 744.00
3" 2435VFD 11 $ 296.00 10" 3007 60 $ 1,124.00
4" 2436VFD 18 $ 380.00 12" 3008 117 $ 1,688.00
5" 2433VFD 25 $ 662.00 14" 3009 120 $ 3,875.00
6" 2437VFD 36 $ 708.00 16" 3010 170 $ 6,250.00
8"* 2438VFD* 80 $ 1,243.00 18" 3011 180 $ 7,498.00
8"** 2438-2VFD** 85 $ 1,689.00 20" 3012 250 $ 9,750.00
10" 2439VFD 129 $ 1,991.00 24" 3013 360 $ 15,000.00
* ANSI 150# Consult Factory for larger sizes up to 48”.
** 300# Flanged Dimensions
See page 9 for 316SS construction body.
Made in U.S.A.
AIS (American Iron and Steel Act)
Flomatic offers domestically manufactured valve products that meet the requirements under EPA State
Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.

78 Discount Code B 78A Discount Code B 93LW Discount Code B
78- Cast iron body with epoxy coating. Flanged connection ANSI 78A- Ductile iron angle body with epoxy coating. Flanged 93LW- Swing check valve with outside lever and weight. Cast
B16.1, class 125. Metal reinforced neoprene swing disc, other seals connection ANSI B16.1, class 125. Metal reinforced neoprene iron body with epoxy coated. Flanged connection ANSI B16.1,
are available that are chemically resistant especially to chlo- swing disc, other seals are available that are chemically resistant class 125. Bronze trim with stainless steel shaft. Metal to metal
ramines. In-line serviceable. especially to chloramines. In-line serviceable. (same as ANSI 90˚ seating standard, rubber optional consult factory. Features
Temp Max: 140°F (60C) elbow dimension) external lever and weight. Imported, mainly for AG/Irrigation
Pressure Max: 175 PSI: 3"-12", 150 PSI: 14" Temp Max: 140°F (60C) purposes, not municipal.
Pressure Max: 175 PSI: 3"-12", 150 PSI: 14" Temp Max: 180°F (80C) Pressure Max: 200 PSI
21/2 " 2181 35 $ 500.00 SIZE PART NO. WGT LIST PRICE SIZE PART NO. WGT. LIST PRICE
3" 2182 38 $ 540.00 3" 2182A 38 $ 540.00 2" 2804LW 30 $ 1,275.00
4" 2183 49 $ 690.00 4" 2183A 49 $ 690.00 3" 2806LW 54 $ 1,375.00
6" 2185 106 $ 1,200.00 6" 2185A 106 $ 1,200.00 4" 2807LW 85 $ 1,500.00
8" 2186 172 $ 2,400.00 8" 2186A 172 $ 2,400.00 6" 2809LW 137 $ 1,813.00
10" 2187A 335 $ 5,400.00 8" 2810LW 240 $ 2,794.00
12" 2188A 432 $ 7,300.00 10" 2811LW 480 $ 5,285.00
SWING CHECK VALVES 800.833.2040
14" 2189A 690 $ 10,200.00 12" 2812LW 700 $ 7,625.00
Made in U.S.A.
AIS (American Iron and Steel Act)
Flomatic offers domestically manufactured valve products that meet the requirements under EPA State
Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.
All models available with limit switch, add $700 to list price and add “LS” to end of part #.
90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B
90LS/92LS*- Cast iron body with epoxy primer. Meets AWWA 90LW/92LW*- Cast iron body with epoxy primer. Meets 90CS/92CS*- Cast iron body with epoxy primer. Meets AWWA
C508 specifications. Flanged connection ANSI B16.1, class 125, AWWA C508 specifications. Flanged connection ANSI B16.1, class C508 specifications. Flanged connection ANSI B16.1, class 125, with
with stainless steel shaft. Metal to metal standard or NITRILE 125, with stainless steel shaft. Metal to metal standard or NITRILE stainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal
(Buna-N) seal (Please add “R” to end of part number) Features (Buna-N) seal (Please add “R” to end of part number) Features (Please add “R” to end of part number) Features external lever and
external lever and spring. external lever and weight. weight. Sealed end cushion closure system for adjustable rate of valve
For vertical installation add “V” to end part number. closure.
For vertical installation add “V” to end part number.
For vertical installation add “V” to end part number.
Temp Max: 180°F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" Temp Max: 180°F (80C)
SIZE PART NO. WGT. LIST PRICE Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"
2" 2704LW 36 $ 1,869.00
2" 2704LS 46 $ 1,869.00 3" 2706LW 62 $ 2,016.00
3" 2706LS 72 $ 2,016.00 2” 2704CS 28 $ 2,677.00
4"* 3707LW* 125 $ 1,765.00
4"* 3707LS* 119 $ 1,765.00 3" 2706CS 75 $ 3,244.00
6"* 3709LW* 224 $ 2,469.00
6"* 3709LS* 205 $ 2,469.00 4"* 3707CS* 195 $ 3,654.00
8"* 3710LW* 345 $ 3,750.00
8"* 3710LS* 359 $ 3,750.00 6"* 3709CS* 325 $ 4,224.00
8"** 3710LW-18** 340 $ 4,080.00
8"** 3710LS-18** 339 $ 4,080.00 8"* 3710CS* 355 $ 5,396.00
10" 2711LW 522 $ 8,431.00
10" 2711LS 537 $ 8,431.00 8"** 3710CS-18** 355 $ 5,878.00
12" 2712LW 733 $ 11,781.00
12" 2712LS 748 $ 11,781.00 10" 2711CS 600 $ 10,710.00
14" 2714LW 1,130 $ 16,317.00
14" 2714LS 1,165 $ 16,317.00 12" 2712CS 825 $ 15,939.00
16" 2716LW 1,530 $ 21,279.00
16" 2716LS 1,645 $ 21,279.00 14" 2714CS 1,150 $ 20,475.00
18" 2718LW 1,903 $ POA
18" 2718LS 1,860 $ POA 16" 2716CS 1,630 $ 25,437.00
20" 2720LW 2,383 $ POA
20" 2720LS 2,495 $ POA 18" 2718CS 1,953 $ POA
24" 2724LW 3,298 $ POA
24" 2724LS 3,440 $ POA 20" 2720CS 2,470 $ POA
30" 2730LW 5,550 $ POA
30" 2730LS 4,975 $ POA 24" 2724CS 3,415 $ POA
* 92 Series 30" 2730CS 5,610 $ POA
* 92 Series ** Short Body 18” Face to Face.
** Short Body 18” Face to Face. * 92 Series
** Short Body 18” Face to Face.
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8”. Epoxy coated blue.
Model 90 is TNEMEC red primer N-140.
11
745 Discount Code B 745BF Discount Code B 745PI Discount Code B
SWING CHECK VALVES 800.833.2040

745- 45° Seat Flo-Flex®, Swing Check Valve Epoxy coated 745 WITH BACKFLUSH DEVICE- 45˚ Seat Flo-Flex®, 745 WITH POSITION INDICATOR- 45˚ Seat Flo-Flex®,
Ductile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, with Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,
Buna-N coated Disc. class 150, ANSI/AWWA C508, with a Buna-N coated Disc. class 150, ANSI/AWWA C508, with a Buna-N coated Disc.
Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
2" 2380BF 27 $ 983.00
3"* 2382PI 40 $ 1,434.00
2" 2380 27 $ 561.00 21/2 " 2381BF 35 $ 1,075.00 4"* 2383PI 68 $ 1,549.00
21/2 " 2381 35 $ 655.00 3"* 2382BF 40 $ 1,090.00 6" 2385PI 128 $ 2,113.00
3"* 2382 40 $ 675.00 4"* 2383BF 68 $ 1,266.00 8" 2386PI 235 $ 3,019.00
4"* 2383 68 $ 763.00 6" 2385BF 128 $ 1,886.00 10" 2387PI 380 $ 4,510.00
6" 2385 128 $ 1,238.00 8" 2386BF 235 $ 3,124.00 12" 2388PI 620 $ 6,641.00
8" 2386 235 $ 2,090.00 10" 2387BF 380 $ 4,909.00 14" 2390PI 740 $ 9,509.00
10" 2387 380 $ 3,736.00 12" 2388BF 620 $ 6,915.00 16" 2391PI 1,035 $12,679.00
12" 2388 620 $ 5,244.00 14" 2390BF 740 $ 10,195.00 18" 2392PI 1,540 POA
14" 2390 740 $ 7,800.00 16" 2391BF 1,035 $ 13,225.00 20" 2393PI 1,835 POA
16" 2391 1,035 $ 10,550.00 18" 2392BF 1,540 POA 24" 2394PI 2,475 POA
18" 2392 1,540 $ 12,018.00 20" 2393BF 1,835 POA
20" 2393 1,835 $ 14,799.00 24" 2394BF 2,475 POA
24" 2394 2,475 $ 23,438.00
Optional strainer available for foot valve operation.
745ASC
Domestic sizes available consult factory.
745BFPI Discount Code B 745LS Discount Code B SURGE STOPPER® Discount Code B
PATENTED
745 WITH POSITION INDICATOR AND BACKFLUSH 745 WITH LIMIT SWITCH (SPDT) - 45˚ Seat Flo-Flex®, 745 SURGE-STOPPER® WITH ADJUSTABLE
DEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coated Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, SPRING CLOSURE - 45˚ Seat Flo-Flex®, Swing Check Valve
Ductile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, with class 150, ANSI/AWWA C508, with a Buna-N coated Disc. Epoxy coated Ductile Iron Body, ANSI B16.1, class 150,
a Buna-N coated Disc. Temp Max: 140°F (60C) Pressure Max: 250 PSI ANSI/AWWA C508, with Buna-N coated Disc. Surge-Stopper®
designed for high head, long pipe lines with field adjustable
Temp Max: 140°F (60C) Pressure Max: 250 PSI spring assisted closure.
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE Temp Max: 140°F (60C) Pressure Max: 250 PSI
3"* 2382BFPI 40 $ 1,854.00 3"* 2382LS 42 $ 1,961.00
4"* 2383BFPI 68 $ 1,978.00 4"* 2383LS 70 $ 2,113.00
6" 2385BFPI 128 $ 2,720.00 6" 2385LS 130 $ 2,716.00
8" 2386BFPI 235 $ 4,098.00 8" 2386LS 237 $ 3,561.00 3"* 2382ASC 42 $ 1,674.00
10" 2387BFPI 380 $ 6,181.00 10" 2387LS 382 $ 5,585.00 4"* 2383ASC 70 $ 1,725.00
12" 2388BFPI 620 $ 8,654.00 12" 2388LS 622 $ 7,788.00 6" 2385ASC 130 $ 2,875.00
14" 2390BFPI 740 $ 12,517.00 14" 2390LS 742 $ 10,853.00 8" 2386ASC 237 $ POA
16" 2391BFPI 1,035 $ 16,071.00 16" 2391LS 1,037 $ 14,249.00 10" 2387ASC 382 $ POA
18" 2392BFPI 1,540 POA 18" 2392LS 1,542 POA 12" 2388ASC 622 $ POA
20" 2393BFPI 1,835 POA 20" 2393LS 1,837 POA
24" 2394BFPI 2,475 POA 24" 2394LS 2,477 POA
Add “S” to end of part number for Stainless Steel fasteners. 10% mark up to list price.
For 2” NPT Stainless Steel tapped plug in cover add -2P to end of part # and $150 adder.

508 Discount Code B 408 & 4082 Discount Code B 77 Discount Code B
408 4082
508- Cast iron body with epoxy coating. Threaded female x 408 & 4082- Cast iron body with epoxy coating and access port, 77- Auto-Vac® Vacuum Breaker - This 1” valve is avail-
female connection. Standard corrosion resistant phenolic “Sinking flanged connection ANSI, class 125. NITRILE (Buna-N) covered metal able in stainless steel and PVC. All internal parts are engineered
Ball” 2 Bolt access cover. Also available with special “Floating ball sinking. Stainless steel fasteners. Also available with special composite, with a stainless steel disc and resilient seat. Used to
Ball” for flood control or air vent application–add “FB” to part “Floating Ball” for flood control or air vent applications–add FB to part prevent water hammer in wastewater valves.
number and 35% to list price. number and 35% to list price. Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 150 PSI Temp Max: 180°F (80C) Pressure Max: 150 PSI MATERIAL PART NO. CASE QTY. LIST PRICE
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE PVC 4701P 12 $ 45.00
1" 3232 3.5 $ 177.00 3" 2144–2 45 $ 620.00 Stainless Steel 4701SS 12 $ 55.00
11/4 " 3233 4.5 $ 180.00 3"* 3144* 45 $ 760.00
11/2 " 3234 6 $ 185.00 4" 2145–2 62 $ 750.00
208T B
2" 3235 8 $ 220.00 4"* 3145* 62 $ 950.00
21/2 " 3236 11.5 $ 528.00 5" 2143 90 $ 1,500.00
Discount Code
3" 2044 30 $ 514.00 6"* 3146* 102 $ 1,600.00
4"* 2045* 45 $ 950.00 8"* 3147* 218 $ 2,923.00
10" 2148 355 $ 6,800.00
12" 2149 624 $ 9,500.00
Note: 3" and 4", has no access cover, quick disconnect valve
system.
*Connection is flanged ANSI 125, no floating ball available. 14" 2150 882 $14,500.00
BALL CHECK VALVES 800.833.2040
New stainless steel available in 2018 *AIS compliant models. Consult factory for other sizes.
408S6 Discount Code B 208 Discount Code B 208T- Corrosion resistant PVC body. Threaded female x female
connection. NITRILE (Buna-N) self-cleaning ball E-Z access port
W ! with NITRILE (Buna-N) seal. Also available with socket weld–
N E change part number from “T” to “S”–same pricing.

1" 2131T 1 $ 46.00
11/4 " 2132T 1 $ 47.00
11/2 " 2133T 2 $ 75.00
2" 2134T 2 $ 75.00
Note: For BSPP threads, change part number from “T” to “P”.
408S6 - All 316 Stainless steel body and access port, flanged 208- Cast iron body with epoxy coating and clean-out port.
connection ANSI class 150. NITRILE (Buna-N) covered metal ball Threaded female x female connection. Features NITRILE (Buna-N) NOT FOR GROUND BURIAL.
sinking. Stainless steel fasteners. “Sinking Ball”.
Pictured with optional
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
Auto-Vac®, add -1 to the
4"* 3145S6* 56 $ 3,700.00 11/4 " 2141 4.5 $ 89.00
11/2 " 2142-0 9.5 $ 120.00
end of Ball Check part
2" 2142 9 $ 120.00
*AIS
Note: Other sizes available at request. number and $100 to list
price.
OptiOnal FlOating Ball

OPERATION OF “THE FLOATING BALL” Horizontal installation requires a 20’ static
APPLICATIONS for Model 408FB and 508FB head on Ball Checks Recommended for flow
TO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW AIR velocity of 3’ to 5’ per sec. For higher
EVACUATION IN FILLING OF TANKS OR PIPES (AIR-VENT).
flow, consult factory.
VERTICAL HORIZONTAL
Seat up Lodging of the ball below

MOUNTING MOUNTING
the axis. The arrow shows

the direction in which the
liquid is moving.
13
54-B B 54-4 B Flo-E-Centric ®
Plug Valve
Discount Code Discount Code
· ANSI/AWWA C517-09
FLO-E-CENTRIC® PLUG VALVES 800.833.2040

· Epoxy coated (inside & out)
· Stainless steel thrust bearing
· V-type packing
· Ductile iron body:

Flo-E-Centric® Plug Valve with Bare Stem Model Flo-E-Centric® Plug Valve with 2” AWWA Operating
54-B - ANSI B16.1, class 150 Ductile iron Body ASTM A536 Nut Model 54-4 - ANSI B16.1, class 150 Ductile iron Body
ASTM A536 65-45-12
65-45-12. Epoxy Powder, Buna-N Plug, V-Type Packing, Self ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type
Lubricating Type 316 Stainless Steel thrust bearing. Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
· Heavy duty Class 150# ANSI

B16.5 flanged ends

SIZE PART NO. WGT LIST PRICE SIZE PART NO. WGT LIST PRICE
2" FNPT 54200004B 15 $ 274.00 2" FNPT 542000044 19 $ 303.00
3" 54000006B 40 $ 517.00 3" 540000064 45 $ 567.00
· 98% welded nickel seat
4" 54000007B 71 $ 722.00 4" 540000074 76 $ 726.00
· Stainless steel hardware

6" 54000009B 137 $ 1,364.00 6" 540000094 142 $ 1,375.00
8" 54000010B 190 $ 2,002.00 8" 540000104 195 $ 2,035.00
10" 54000011B 346 $ 2,871.00
· 100% full ported (2” to 6”)
12" 54000012B 441 $ 3,870.00
· Standard ported (8” to 12”)

54-3 B Plug Valve w/Act. B
· Spherical BUNA-N coated
DI plug
· 2” to 8” rated to 200 PSI

(direct or reverse flow)
· 10” and 12” rated to 175

PSI (direct or reverse flow)
Flo-E-Centric® MJ Plug with buried service gear- Flo-E-Centric® Plug Valve w/Actuator - Electric actu-
Series 5400 valves are Ductile iron Body Epoxy coated, ated plug valve, for open/close service manual hand-
Buna-N Plug, V-Type Packing, Self Lubricating Type 316 wheel override.
Stainless Steel thrust bearing.
54-0 B
Temp Max: 180°F (80C) Pressure Max: 150 PSI SIZE PART NO. WGT LIST PRICE
2" FNPT 542000040A 42 $ 1,898.00
Discount Code
3" 540000060A 78 $ 2,310.00
6" 543000097 70 $ 1,650.00
4" 540000070A 120 $ 3,531.00
8" 543000107 146 $ 2,112.00
6" 540000090A 188 $ 4,428.00
10" 543000117 265 $ 3,190.00
8" 540000100A 322 $ 6,269.00
12" 543000127 342 $ 4,070.00
10" 540000110A 478 $ 6,724.00
14" 543000147 573 $ 6,298.00
12" 540000120A 573 $ 7,903.00
16" 543000167 661 $ 8,041.00
18" 543000187 882 $ 11,220.00
20" 543000207 1370 $ 15,719.00
For modulating service add smart card option to list
24" 543000247 2271 $25,289.00
price and “M” to part #. Other options available
consult factory.
HANDLE B
Flo-E-Centric® Plug Valve with Gear Box Model 54-
See smart card option on page 16. 0 (Direct Mounted) - ANSI B16.1, class 150 Ductile iron
Discount Code Body ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type
Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
SIZE PART NO. WGT LIST PRICE
3" 540000060 55 $ 594.00
4" 540000070 88 $ 769.00
6" 540000090 165 $ 1,429.00
8" 540000100 256 $ 2,079.00
10" 540000110 439 $ 3,003.00
12" 540000120 533 $ 3,960.00
Flo-E-Centric® Plug Valve Handle for 2” Operating

Nut (for Model 54-4 above). - Epoxy coated.
SIZE PART NO. DESCRIPTION LIST PRICE
2" 1105-50-11 Handle (12” Long) $ 13.00
3" 1105-200-09 Handle (17” Long) $ 31.00
4" 1105-200-09 Handle (17” Long) $ 31.00
6" 1105-200-09 Handle (17” Long) $ 31.00
8" 1105-200-09 Handle (17” Long) $ 31.00

®
FLANGED BUTTERFLY VALVES
AZURE® BUTTERFLY
AZURE ®
Discount Code B w/ACTUATOR Discount Code B
AWWA C504:
• Proof of design
available upon request.
• NSF/ANSI 61 Approved.
• Fusion epoxy paint
• V-type packing
MODEL 45 (Gear Operated) - Ductile iron flanged body. MODEL 45 - Electric actuated, Azure® butterfly valve,
ASTM A536 ductile iron disc with stainless type 316 steel edge. manual handwheel override for open/close service. Other
Seat, standard NBR (EPDMoptional)vulcanized.Designed to options available consult factory.
• Seat Buna-N
AWWA standard C504,class150B. Electric/pneumatic actuation
available. SIZE PART NO. WGT. LIST PRICE
BUTTERFLY VALVES 800.833.2040
(Ductile Iron Disc) WITH GEAR

3" 45000006A 61 $ 2,569.00
• Ductile Iron disc,

4" 45000007A 72 $ 2,739.00
6" 45000009A 82 $ 3,512.00
316SS edge
85
(Ductile Iron Disc) WITH GEAR
3" 450000060 43 $ 592.00 8" 45000010A 165 $ 4,593.00
4" 450000070 54 $ 693.00 10" 45000011A 220 $ 5,572.00
6" 450000090 74 $ 901.00 12" 45000012A 300 $ 6,721.00
• Meets AWWA C504

8" 450000100 134 $ 1,252.00 14" 45000014A 530 $ 7,924.00
10" 450000110 188 $ 1,719.00 16" 45000016A 564 $ 11,161.00
12" 450000120 261 $ 2,535.00 18" 45000018A 686 $ 13,969.00
14" 450000140 380 $ 3,777.00 20" 45000020A 823 POA
16" 450000160 414 $ 4,767.00 24" 45000024A 910 POA
18" 450000180 532 $ 5,324.00
20" 450000200 653 $ 5,656.00 For modulating service add smart card option to
24" 450000240 739 $ 8,767.00 list price and “M” to part #.
AZURE® Discount Code B SMART CARD Discount Code B
MODEL 45 (Lever Operated) - Cast ductile iron flanged SMART CARD - FCEL Electric Actuator Modulating Service
body. ASTM A536 Cast ductile iron disc with stainless type 316 Part Numbers and Pricing. For High Performance Digital
edge. Seat standard NBR (EPDM optional) bonded and Positioning Service. Basic 4-20ma input and output, providing
vulcanized. Designed to AWWA standard C504, class 150B. 450 points of resolution with Flomatic FCEL Electric Actuators.
Electric/pneumatic actuation available. Able to be configured for 1-5V, 0-5V, 0-10V or digital com-
High Quality Valves Built to Last… mand. Provides default setting upon loss of command. Provides
Temp Max: 180°F (82C) Pressure Max: 200 PSI easy setting of open/closed positions for reverse or direct
acting without wiring changes.
WITH LEVER
3" 450000061 43 $ 572.00 Pricing adder $1,153.00 to install DHC Modulating com-
4" 450000071 54 $ 655.00 ponents in FCEL electric actuator. To order valve with
6" 450000091 74 $ 930.00 smart card add “M” to the end of valve part number.

®
NEW! SYLAX 3

® ®
NEW Flomatic SYLAX 3, Strong DI body, EPDM vulcanized seat, SS stem and disc, 250 PSI bi-directional pressure rating, 230˚F max.
temperature rating NSF/ANSI 61 certified, for use with ANSI 125/150# flanges with lockable 10 position handle ISO 5211 top flange for
easy actuation, rated to 250 PSI for dead-end service.
* For 120V on/off

SYLAX 3 WAFER with LEVER HANDLE For gear operator
actuation add ‘A’
add ‘G’ to part #.
SYLAX WAFER (SS)
®
Discount Code B Size Part # List Price to part #.
2” S3W04 $ 106.00 $ 190.00 $ 1,472.00
2½” S3W05 $ 115.00 $ 197.00 $ 1,478.00
3” S3W06 $ 129.00 $ 213.00 $ 1,489.00
4” S3W07 $ 161.00 $ 245.00 $ 1,558.00
5” S3W08 $ 240.00 $ 329.00 $ 1,781.00
6” S3W09 $ 272.00 $ 349.00 $ 2,043.00
8” S3W10 $ 499.00 $ 615.00 $ 2,512.00
10” S3W11 $ 692.00 $ 809.00 $ 3,031.00
12” S3W12 $ 1,061.00 $ 1,201.00 $ 3,626.00
* For 120V on/off

SYLAX LUG (SS)
®
Discount Code B SYLAX 3 LUG with LEVER HANDLE For gear operator
add ‘G’ to part #.
actuation add ‘A’
Size Part # List Price to part #.
2” S3L04 $ 140.00 $ 224.00 $ 1,480.00
2½” S3L05 $ 142.00 $ 226.00 $ 1,487.00
3” S3L06 $ 148.00 $ 231.00 $ 1,510.00
4” S3L07 $ 196.00 $ 280.00 $ 1,568.00
5” S3L08 $ 278.00 $ 361.00 $ 2,049.00
6” S3L09 $ 336.00 $ 413.00 $ 2,077.00
8” S3L010 $ 658.00 $ 778.00 $ 2,540.00
10” S3L011 $ 897.00 $ 1,017.00 $ 3,074.00
12” S3L012 $ 1,187.00 $ 1,327.00 $ 3,720.00
SYLAX LUG ELECTRIC

®
GEAR
ACTUATED (SS) Discount Code B OPERATOR Discount Code B
GEAR OPERATORS
Valve Size Part # LIST PRICE
2-4” 149G037000 $ 91.00
5-6” 149G037001 $ 91.00
8-10” 149G037002 $ 153.00
12” 149G037004 $ 182.00
*Assumes maximum differential pressure of 50 PSI

Wafer style Cross-reference Lug style Cross-reference
Size 'OLD
LD' ' 'NEW
EW' ' Size 'OLD
LD' ' 'NEW
EW' '
2" 149G011266 S3W04 2" 149G037300 S3L04
2-1/2" 149G011287 S3W05 2-1/2" 149G037302 S3L05
3" 149G011297 S3W06 3" 149GVP2047 S3L06
10 position handle
10 position handle
4" 149G011316 S3W07 4" 149G037305SH S3L07
5" 149G011334 S3W08 5" 149G037306 S3L08
6" 149G011343 S3W09 6" 149G037307 S3L09
8" 149G016281 S3W10 8" 149G037308 S3L10
10" 149G013612 S3W11 10" 149G037309 S3L11
12" 149G023904 S3W12 12" 149G037310 S3L12
Size 'OLD
LD' ' 'NEW
EW' ' Size 'OLD
LD' ' 'NEW
EW' '
2" 149G011266G S3W04G 2" 149G037300G S3L04G
2-1/2" 149G011287G S3W05G 2-1/2" 149G037302G S3L05G
3" 149G011297G S3W06G 3" 149GVP2047G S3L06G
Gear Operator
Gear Operator
4" 149G011316G S3W07G 4" 149G037305SHG S3L07G
5" 149G011334G S3W08G 5" 149G037306G S3L08G
6" 149G011343G S3W09G 6" 149G037307G S3L09G
8" 149G016281G S3W10G 8" 149G037308G S3L10G
10" 149G013612G S3W11G 10" 149G037309G S3L11G
12" 149G023904G S3W12G 12" 149G037310G S3L12G
Size 'OLD'
LD ' 'NEW'
EW ' Size 'OLD'
LD ' 'NEW'
EW '
2" 149G011266A S3W04A 2" 149G037300A S3L04A
2-1/2" 149G011287A S3W05A 2-1/2" 149G037302A S3L05A
110VAC on/off electric actuator
110VAC on/off electric actuator

3" 149G011297A S3W06A 3" 149GVP2047A S3L06A
4" 149G011316A S3W07A 4" 149G037305SHA S3L07A

5" 149G011334A S3W08A 5" 149G037306A S3L08A
6" 149G011343A S3W09A 6" 149G037307A S3L09A
8" 149G016281A S3W10A 8" 149G037308A S3L10A
10" 149G013612A S3W11A 10" 149G037309A S3L11A
12" 149G023904A S3W12A 12" 149G037310A S3L12A
Butterfly Valve Options – Inquire with Factory CHAINWHEEL OPTION
• Gear Operator
• Chain-wheel Operator
• Shaft Extensions
• Actuation:
o Electric
> 110/120VAC standard – Inquire for other voltages
> Battery backup for power loss positioning
> ‘Smart Card’ options for valve positioning Chainwheel Option
(Use with gear option)
• Basic 4-20mA input and output
• Can be configured for 1-5V, 0-5V, 0-10V or digital command
• Default setting for loss of command
• Feedback
• Repeat cycle timer
• Log rate control
o Pneumatic
> Double-acting
> Spring return

60SE Discount Code A 333E Discount Code A 333DPE Discount Code A
FOOT VALVES AND PLASTIC VALVES 800.833.2040

60SE-ENVIRO FOOT VALVE- body with threaded female 333E-ENVIRO FOOT VALVE- body with high strength acetal 333DPE-ENVIRO FOOT VALVE- body, but with dual pur-
connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2", poppet. Tappered stainless steel strainer, end cap, spring and fas- pose male and female threads.
3" and 4" have bronze poppets) stainless steel spring and strainer. teners. NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 250 PSI
Temp Max: 180°F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI) Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4 "M x 1"F 4181E .5 50 $ 58.00
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/ "* 5820E* .1 100 $ 40.00
2 1" 4171E .6 50 $ 55.00 11/2"M x 11/4 "F 4182E .8 36 $ 69.00
3/ " 4100E .3 100 $ 41.00
4 11/4 " 4172E .8 36 $ 65.00
124P A
1" 4101E .8 50 $ 46.50
11/4 "** 4102E** .8 50 $ 54.00 100MP Discount Code A Discount Code
11/4 " 4103E 1 36 $ 57.60
11/2 " 4104E 1.6 25 $ 88.90
2" 4105E 2.1 16 $ 138.00
21/2 " 4106E 6 $ 457.00
3" 4107E 11 $ 630.00
4" 4108E 19 $ 1,050.00
*Polyethylene strainer
**Model 600S (4102E) will pass through a 2" pipe.
For high temperature: add HTE to the end of part # and 25% to list.
190D/193D/190P Discount Code A 100MP- High-strength Noryl® GTX 830 Body with NITRILE 124P- FOOT VALVE- features a simple flow through design
(Buna-N) seal and polypropylene follower. Threaded male x with corrosion resistant parts and feature a tapered composite
female connection. strainer and poppet.
SIZE PART NO. CASE QTY. LIST PRICE SIZE PART NO. WGT. LIST PRICE
11/4 "M x 1"F 4221MP 49 $ 23.00 1" - 11/4"** 5728PI .24 $ 22.00
11/4 "M x 11/4 "F 4242MP 49 $ 25.00 3/ " - 11/ "*
4 2 5728P .31 $ 24.00
Bulk pricing available. 2" Female 5735P .25 $ 40.00
104P A
* 4 in 1 combo, male NPT threads 3/4" – 11/2"
Discount Code ** 2 in 1 combo barbed insert 1" & 11/4"
190D- Acetal body and strainer, Nylon 11 poppet.
297D/290P A
Stainless steel spring and NITRILE (Buna-N) seal.
193D- Similar to the 190D with one-piece acetal body Discount Code
and strainer.
190P- Polypropylene body and strainer. Stainless steel spring
and VITON seal.
SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE
3/ " 5619 193D .03 10 $ 18.00
8
3/ " 5726 190P .03 10 $ 18.00
8 104P- Reinforced nylon body with threaded female connection.
1/ " 5620 193D .03 10 $ 31.00
2
Polyethylene strainer, polyethylene/acetal poppet. NITRILE
3/ " 5728 190P .08 10 $ 35.00
(Buna-N) seal and stainless steel spring.
4
11/2 " 5724 190D .28 6 $ 39.00 Temp Max: 150°F (65C) Pressure Max: 150 PSI
2" 5725 190D .41 6 $ 89.00
901 A
SIZE PART NO. WGT. CASE QTY. LIST PRICE The 297D- is an acetal body check valve. Threaded female x
1" 5732 .13 50 $ 23.00 female construction. Features a VITON seal, Nylon 11 poppet and
11/4 " 5733 .21 36 $ 28.00
Discount Code stainless steel spring.
3/" 5359 .04 $ 27.50
8
1/" 5239 .06 $ 36.00
2
All foot valves are low-lead

NSF/ANSI 372 approved The 290P is a Polypropylene body check valve and poppet with
stainless steel spring and VITON seal.
901- Non-corrosive acetal body and guide. Insert connection.
1/" 5357 .06 $ 34.00
Features NITRILE (Buna-N) seal and stainless steel spring. 2
3/" 5358 .06 $ 45.00
Temp Max: 180°F (80C) Pressure Max: 150 PSI 4

3/" 2011 .1 $ 10.00
8
1/" 2000 .18 $ 10.50
2
3/ " 2001 .35 $ 10.60
4
1" 2030 .5 $ 17.00

357 Discount Code A 63 Discount Code B 812XTF Discount Code B
357- Cast iron body and strainer. Threaded female connection. 63- Cast iron body with epoxy coating. Features threaded female 812XTF- All 316 stainless steel, threaded female connection.
Hinged leather seat. connection. NITRILE (Buna-N) seal, high strength non-metallic or Metal to metal seating and teflon O-ring.
Temp Max: 80°F (27C) Pressure Max: 75 PSI unleaded bronze or ductile iron poppet, stainless steel spring. 2"-4" available with socket weld connection.Consult factory for
Heavy duty polyethylene strainer. pricing.
11/4 " 4962 3 $ 180.00
Temp Max: 180°F (80C) Pressure Max: 250 PSI * Temp Max: 400°F (200C) * Pressure Max: 300 PSI
11/2 " 4963 3 $ 181.00
2"* 4764* 4 $ 100.00
2" 4964 6 $ 188.00 1/ "
2 2420XTF 2 $ 300.00
3" 4966 13 $ 290.00 21/2 " 4765 5 $ 150.00 3/ " 2421XTF 4 $ 370.00
3" 4766 9 $ 180.00
4
4" 4967 20 $ 400.00 1" 2422XTF 5 $ 551.00
6" 4969 45 $ 675.00 4" 4767 17 $ 230.00
11/4 " 2423XTF 9 $ 671.00
8" 4970 99 $ 1,475.00 6"** 4789VFD** 36 $ 950.00
11/2 " 2424XTF 12 $ 744.00
2" 2425XTF 14 $ 885.00
21/2 " 2426XTF 14
333SS A
$ 1,548.00
*2" Acetal guide.
** Galvanized Strainer Only. 3" 2427XTF 25 $ 1,783.00
Discount Code 2 1/2" - Unleaded bronze guide. 3"-6" Ductile iron poppet. 4" 2428XTF 39 $ 2,030.00
For Municipal applications see 302BT or 302S6 below 5" 2429XTF 62 $ 4,323.00
6" 2430XTF 80 $ 5,148.00
8" 2431XTF 140 $ 9,000.00
* Consult factory for temp. & pressure rating.
333SS- FOOT VALVE- All 303 Stainless steel body with high
REFER TO PAGE 35 FOR
FOOT VALVES 800.833.2040
strength acetal poppet. Tappered stainless steel strainer, end cap,

spring and fasteners. NITRILE (Buna-N) seal.
LOCAL SALES REPS BY STATE
1" 4171SS .6 50 $ 125.00
11/4 " 4172SS .8 36 $ 145.00
80S6FVFD Discount Code A 302BT Discount Code B 302S6 Discount Code B
80S6FVFD - Foot Valve- All 316 stainless steel threaded check 302BT- Cast iron body with epoxy coating, unleaded bronze disc 302S6- All 316 stainless steel body. ANSI class 150# flanged
valve body. Stainless steel spring, poppet, strainer and Buna-N and seat (2"-12"). Flanged connection ANSI B16.1, class 125#. connection. Features a EDPM seal and 304 stainless steel strainer.
seal, Viton optional. Features a EPDM O-ring and stainless steel strainer. Temp Max: 180°F (80C) Pressure Max: 200 PSI
Temp Max: 180°F (200°C) Pressure Max: 400 PSI Temp Max: 180°F (80C)
2" 4763S6 23 $ 1,500.00
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
1" 4031S6FVFD 2.1 $ 260.00 SIZE PART NO. WGT. LIST PRICE
21/2 " 4768S6 30 $ 1,650.00
11/4" 4032S6FVFD 2.4 $ 350.00 2" 4763BT 23 $ 950.00 3" 4769S6 37 $ 1,763.00
11/2 " 4033S6FVFD 5.0 $ 370.00 21/2 " 4768BT 30 $ 960.00 4" 4770S6 63 $ 2,160.00
2" 4034S6FVFD 7.0 $ 570.00 3" 4769BT 37 $ 970.00 6" 4772S6 100 $ 3,700.00
3" 7938S6FVFD 15 $ 1,350.00 4" 4770BT 63 $ 1,145.00 8" 4774S6 160 $ 5,900.00
4" 7939S6FVFD 30 $ 2,200.00 5" 4771BT 80 $ 1,549.00 12" 5416S6 410 $ 16,000.00
6" 4089S6FVFD 75 $ 7,000.00 6" 4772BT 100 $ 1,744.00
8" 4090XSSFVFD 105 $ 9,000.00 8" 4774BT 160 $ 2,522.00
10" 4091XSSF 190 $ 15,500.00 10" 4775BT 260 $ 3,500.00
12" 5416BT 410 $ 4,942.00
14" 5417BT 500 $ 11,000.00
Replaces model 80S6F
16" 5418BT 650 $ 13,750.00

18" 5419BT 850 $ POA
20" 5420BT 1050 $ POA
High Quality Valves Built to Last...

24" 5422BT 1440 $ POA
www.flomatic.com 19
16FL STRAINER Discount Code B 16 STRAINER Discount Code B 6P STRAINER Discount Code A
STRAINERS 800.833.2040
16FL STRAINER- All 316 Stainless steel body, flanged with 16 STRAINER- All 316 Stainless steel body, threaded FNPT 6P STRAINER- Plastic (polyethylene) with male NPT threads.
316SS internal strainer. Standard 20 mesh replacement screens “Y-Type” strainer. Standard 20 mesh replaceable screens optional Converts a check valve to a foot valve, by screwing into the valve
optional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). threads.
ASME 150 Class. ASME 600 Class. Temp Max: 180°F (80C)
Standard 20 Mesh – if optional 40, 60, 80, or 100 add to Standard 20 Mesh – if optional 40, 60, 80, or 100 add to
end of part number: 40 Mesh = 040 to end of part number STRAINER ONLY
end of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number 60 Mesh = 060 to end of part number SIZE PART NO. WGT. CASE QTY. LIST PRICE
80 Mesh = 080 to end of part number 80 Mesh = 080 to end of part number 3/ " 4300P .1 25 $ 5.56
4
1" 4301P .1 25 $ 6.00
100 Mesh = 100 to end of part number 100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon X in part # below 1 for stainless steel and 2 for carbon 11/4 " 4302P .2 25 $ 6.72
*Temp Max: 800°F *Pressure Max: 600 PSI *Temp Max: 800°F *Pressure Max: 600 PSI 11/2 " 4303P .3 10 $ 6.84
*See temperature/pressure rating.
46T STRAINER B
*See temperature/pressure rating.
STAINLESS CARBON
STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE
1/ " S2501-X-0300 $ 203.00 $ 167.00
Discount Code
SIZE PART NO. LIST PRICE LIST PRICE
4
1" S0014-X-0300 $350.00 $340.00 3/ " S3751-X-0300 $ 203.00 $ 167.00
11/2 " S0154-X-0300 $630.00 $605.00
8
1/ " S5001-X-0300 $ 203.00 $ 167.00
2" S0024-X-0300 $800.00 $726.00 2
3/ " S7501-X-0300 $ 203.00 $ 167.00
3" S0034-X-0300 $950.00 N/A 4
1" S0011-X-0300 $ 230.00 $ 195.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet. 11/4 " S1251-X-0300 $ 275.00 $225.00
Strainers supplied with PTFE cap seal. 11/2 " S0151-X-0300 $ 437.00 $290.00
Optional graphite cap seal add: $15.00 2" S0021-X-0300 $ 576.00 $308.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet.
6SE STRAINER A
Strainers supplied with PTFE cap seal. Optional graphite list price cap seal
adder: $15.00 Many different types of configurations available. 46T STRAINER- Cast iron body with epoxy coating. Threaded
Discount Code female connection. Removable polyethylene strainer. (cutaway
46 STRAINER B
picture shown)
Discount Code
2" 4364 2.5 $ 88.00
21/2 " 4365 4 $ 140.00
3" 4366 8.2 $ 145.00
4" 4367 14 $ 199.00
6SE STRAINER- Unleaded bronze body with threaded female

STRAINERS Discount Code C
connection. Stainless steel strainer with unleaded bronze. Stainless
steel or plastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE 46 STRAINER- Cast iron body with epoxy coating. Flanged con-
1/ " 4399E .1 10 $ 30.00
nection ANSI 125. Plastic 2"-4" stainless steel 5"-24" strainer.
2
3/ " 4300E .2 100 $ 37.00
4
1" 4301E .6 49 $ 48.00 P: Plastic screen 2"-4"
11/4 "* 4302E * .6 36 $ 67.00
2" 5814P 4.7 $ 165.00
11/2 "* 4303E * 1.2 25 $ 79.00
21/2 " 5815P 6.4 $ 167.00
2"* 4304E * 2.4 16 $ 105.00 STRAINER- Threaded unleaded Bronze body (3/8" – 2"), 125#
3" 5816P 8.8 $ 220.00
21/2 " 4305E 3 $ 278.00
4" 5817P 13 $ 350.00
cast iron and flanged (21/2" – 12"), 20 mesh stainless steel strain-
3" 4306E 7.2 $ 410.00
er. Furnished with clean out plug.
4" 4307E 14 $ 785.00 Pressure Max: 200 PSI (21/2" – 12") Temp Max: 180°F
Pressure Max: 400 PSI (3/8" – 2")
S: Stainless steel screen 5"-24"
5" 5821S 16 $ 447.00
* End caps on strainer are composite.
6SS STRAINER A
6" 5822S 21 $ 488.00 SIZE PART NO. WGT. LIST PRICE
8" 5824S 44 $ 728.00
Discount Code 3/ " 8711E .5 $ 32.00
10" 5825S 55 $ 1,300.00 8
1/ " 8712E .3 $ 34.00
12" 5826S 80 $ 1,589.00 2
3/ " 8713E 2 $ 55.00
14" 5827S 121 $ 2,524.00 4
16" 5828S 166 $ 3,225.00 1" 8714E 4 $ 69.00
18" 5829S 211 $ 4,043.00 11/4" 87142E 5 $ 115.00
20" 5830S 256 $ 4,177.00 11/2 " 87143E 6 $ 150.00
24" 5832S 346 $ 5,513.00 2" 87144E 9 $ 260.00
21/2 " 87145 15 $ 413.00
3" 87146 25 $ 488.00
4" 87147 95 $ 813.00
6" 87148 185 $ 1,375.00
6SS STRAINER- All 303 stainless steel body with threaded 8" 87149 299 $ 2,438.00
female connection. Stainless steel strainer with stainless steel or 10” 87150 372 $ 3,500.00
12” 87151 539 $ 4,875.00
plastic caps.
1" 4371SS .6 49 $ 140.00
11/4 " 4372SS .6 36 $ 160.00
20 www.flomatic.com
CHECK THESE
FEATURES...
Rugged Dependability
• Model C, full port globe style
• Model CF, reduced cavitation configuration
• Model CA, angle style
Always with these standard features...
• Fusion Epoxy coating – internal & external
• Copper tubing (ss optional)
• Control tubing isolation valves
• Gauge cocks and air bleeder valve
• Valve Trim – Stainless Steel Standard
Optional Unleaded Bronze
• Body drain plugs
• EZ off Jack screw covers & seat rings
• Unleaded Pilots
Up to 36''
CONTROL VALVES 800.833.2040
• NSF/ANSI 61 Approved body 11/4”-12”

Can be equipped with these popular options
• Dual power chamber
NSF/ANSI 61 approved • Built-In check feature

• Stainless Steel Pilots
consult factory for configuration and sizes • Electronic controls
AIS compliant • Position indicator (standard 6” and up)
Model C
SEVERAL
• Full port globe style
®
(flanged or threaded) DIFFERENT
SERIES...
Model CF • Pressure Reducing Valve
• Modulating Altitude Valve
• Non-Modulating Altitude Valve
• Reduced port globe style
• Back Pressure Sustaining Valve

(flanged or threaded)
• Pressure Relief Valve
Model CA • Surge Arrestor Valve
• Pump Control Valve
• Pilot Operated Float Valve
• Angle body globe style ®
• Solenoid Control Valve

(flanged or threaded)
• Flow Control
• Hydraulic Check Valve
AIS compliant – Made in USA
(Must specify on order)

C101 THREADED/CF101/C101/CA101 Discount Code B C103/CA103 Discount Code B

PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. Part numbers below are for standard PRESSURE REDUCING VALVE WITH CHECK - Reduces
C101 valve set at 25-125 PSI. Consult factory for other options. high upstream pressure to lower downstream pressure.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE
150#
C/CA 150#
CF FLANGED* C/CA C/CA C/CA C/CA
C THREADED C FLANGED C FLANGED SIZE THREADED CF MODEL* C FLANGED C FLANGED
11/4 " C101B0B00130 $1,426
150# 300# 150# 150# 300#
111//22" $2,330
$ 1,735 $ 1,836
$2,200 $2,465
$ 2,072
11/2 " C101C0B00130 $ 1,451 11/2 " C101C1B00130 $ 1,553 C101C2B00130 $1,789
2" $ 1,745 $ 2,126 $ 2,210
2" C101D0B00130 $1,462 2" C101D1B00130 $ 1,843 C101D2B00130 $1,927 221/12/2"" $ 2,104 $ 2,106 $ 2,217 $ 2,475
21/2" C101E0B00130 $ 1,821 CF101E1B00130 $ 1,823 21/2 " C101E1B00130 $ 1,933 C101E2B00130 $2,192 3"3" $ 2,234 $ 2,141 $ 2,261 $ 2,519
C101F0B00130 $ 1,951 CF101F1B00130 $ 1,858 3" C101F1B00130 $ 1,978 C101F2B00130 $2,236 4"4" $ 2,269 $ 2,826 $ 3,029
3"
6"6" $ 3,295 $ 4,299 $ 4,628
4" CF101G1B00130 $ 1,986 4" C101G1B00130 $ 2,543 C101G2B00130 $2,746
8"8" $ 5,319 $ 7,173 $ 7,780
6" CF101J1B00130 $ 3,012 6" C101J1B00130 $ 4,016 C101J2B00130 $4,345 10" $ 7,593 $ 10,015
10" $ 10,917
8" CF101K1B00130 $ 4,881 8" C101K1B00130 $ 6,735 C101K2B00130 $7,342 12"
12” $ 11,994 $ 15,881 $ 16,883
10" CF101L1B00130 $ 7,155 10" C101L1B00130 $ 9,577 C101L2B00130 $10,479 6"
14” POA POA POA
12" C101M1B00130 $15,443 C101M2B00130 $16,445 8"
16” POA POA POA
12" CF101M1B00130 $ 11,557
10"
18” POA POA POA
14" CF101N1B00130 POA 14" C101N1B00130 POA C101N2B00130 POA
12"
20” POA POA POA
16" CF101O1B00130 POA 16" C101O1B00130 POA C101O2B00130 POA
18" CF101P1B00130 POA 18" C101P1B00130 POA C101P2B00130 POA
* Reduced cavitation configuration.
20" CF101Q1B00130 POA 20" C101Q1B00130 POA C101Q2B00130 POA

NSF/ANSI 61
Certified Valves
NEW LARGER SIZES IN STOCK – 16”, 20”, 24 ”, & 30”

C201/CA201 Discount Code B C205/CA205 Discount Code B C301/CA301 Discount Code B
MODULATING ALTITUDE VALVE - Single acting level NON-MODULATING ALTITUDE VALVE - Single Acting. BACK PRESSURE SUSTAINING VALVE - Sustains a
control with modulation for final filling of storage tanks. Level control of storage tanks, reservoirs, and basins. minimum upstream pressure to prevent overdrafting the supply.
SIZE THREADED CF MODEL* C/CA C/CA C/CA C/CA

SIZE THREADED C/CA
C/CA C/CA
C/CA
150# C FLANGED C FLANGED SIZE CF MODEL* C FLANGED C FLANGED
SIZE THREADED CF MODEL*
CF MODEL* C CFLANGED
FLANGED CC FLANGED
11/4" $1,495
150# 300# FLANGED 150# 150# 300#
150# 150# 300#
111//22" $2,330
$ 3,598 $2,200
$ 3,742 $2,465
$ 3,978
150# 150# 300#
11/2 " $ 3,683 $ 3,950 $ 4,107 11/2 " $1,504 $ 1,770 $ 1,825
2" $ 3,965 $ 4,060 $ 4,343
2" $ 4,060 $ 4,157 $ 4,323 2" $1,539 $ 1,801 $ 1,886
221/12/2"" $ 4,294 $ 4,035 $ 4,494 $ 4,809
21/2 " $ 4,397 $ 4,132 $ 4,603 $ 4,785 21/2 " $1,913 $ 1,885 $ 2,047 $ 2,185
3"3" $ 4,657 $ 4,174 $ 4,549 $ 4,756
3" $ 4,769 $ 4,276 $ 4,660 $ 4,844 3" $1,977 $ 2,097 $ 2,210 $ 2,312
4"4" $ 4,920 $ 5,324 $ 5,695
4" $ 5,039 $ 5,451 $ 5,663 4" $ 2,320 $ 2,985 $ 3,183
6"6" $ 5,536 $ 6,588 $ 7,050
6" $ 5,669 $ 6,748 $ 7,013 6" $ 3,228 $ 4,391 $ 4,717
8"8" $ 7,080 $ 9,471 $ 10,135
8" $ 7,250 $ 9,701 $10,083 8" $ 5,073 $ 7,182 $ 7,785
10"
10" $ 9,565 $ 10,449 $ 11,180
10" $ 9,795 $10,702 $ 11,124 10 $ 7,463 $ 9,924 $ 10,803
12"
12” $14,514 $ 15,886 $ 16,998
12" $ 14,863 $16,454 $16,916 12" $ 12,457 $ 15,393 $ 16,021
6"
14” POA POA POA
14" POA POA POA 14" POA POA POA
8"
16” POA POA POA
16" POA POA POA 16” POA POA POA
1"
18” POA POA POA
12"
20” POA POA POA
* Reduced cavitation configuration. * Reduced cavitation configuration.

C401/CA4 01 Discount Code B C501/CA501 Discount Code B C601/CA601 Discount Code B
PRESSURE RELIEF VALVE - Protects against excessive SURGE ARRESTOR VALVE - Provides relief protection against PUMP CONTROL VALVE - Eliminates pump station pressure
pressure. pressure surges during pump start up, shut down, or power surges during start up and shut down.
C/CA C/CA failure.
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED C/CA C/CA
150# 150# 300# C/CA C/CA
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED SIZE CF FLANGED* C FLANGED C FLANGED
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
150# 150# 300#
11/2 " $ 3,615 $ 3,843
150# 150# 300# 150# 150# 300#
11/4" $1,495 11/2 " $ 3,747 $ 4,450 $ 4,701 2" $ 3,912 $ 4,195
11/2 " $1,504 $ 1,770 $ 1,825 2" $ 4,265 $ 4,683 $ 4,948 21/2 " $ 3,899 $ 4,341 $ 4,646
2" $1,539 $ 1,801 $ 1,886 21/2 $ 4,670 $ 4,597 $ 4,967 $ 5,224 3" $ 4,176 $ 4,593 $ 5,052
21/2 " $1,913 $ 1,885 $ 2,047 $ 2,185 3" $ 4,719 $ 4,753 $ 4,982 $ 5,243 4" $ 4,814 $ 5,078 $ 5,818
3" $1,977 $ 2,097 $ 2,210 $ 2,312 4" $ 5,031 $ 5,309 $ 5,498 6" $ 6,004 $ 6,827 $ 7,305
4" $ 2,320 $ 2,985 $ 3,183 6" $ 5,730 $ 6,547 $ 6,856 8" $ 7,642 $ 8,489 $ 9,258
6" $ 3,228 $ 4,391 $ 4,717 8" $ 7,405 $ 9,146 $ 9,719 10" $12,421 $ 14,122 $16,644
8" $ 5,073 $ 7,182 $ 7,785 10" $ 9,867 $ 12,345 $ 13,178 12 $17,823 $20,475 $21,907
10” $ 7,463 $ 9,924 $ 10,803 12" $ 15,354 $ 18,152 $ 18,779 14" POA POA POA
12" $ 12,457 $ 15,393 $ 16,021 14" POA POA POA 16" POA POA POA
14" POA POA POA 16" POA POA POA 18" POA POA POA
16” POA POA POA 18" POA POA POA 20" POA POA POA
20" POA POA POA
NSF/ANSI 61
Certified Valves
10 Reasons to Select
Flomatic’s Automatic
Control Valves C621 Discount Code B C701/CA701 Discount Code B
1 NSF/ANSI 61 body 11/4”-12”*
2 Isolation Valves Standard
3 Drain Plug Standard
Test Cocks Standard

Pump Control Valve Modulating With Dual Power PILOT OPERATED FLOAT VALVE - For level control of storage
4 Chamber- Eliminates pump station pressure surges during start up tanks, reservoirs, or basins.
and shut down.
All SS-Fasteners Standard

C/CA C/CA
C/CA C/CA SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
5 SIZE CF FLANGED C FLANGED C FLANGED 150# 300#
11/4" $1,772
150# 150# 300#
Jack Screws Standard

3" $ 5,200 $ 5,618 $ 6,077 11/2 " $1,772 $ 1,911 $ 2,134
6 4" $ 5,839 $ 6,103 $ 6,843 2" $1,803 $ 2,185 $ 2,265
6" $ 7,029 $ 7,852 $ 8,330 21/2 " $2,153 $ 2,165 $ 2,270 $ 2,425
8" $ 8,666 $10,800 $11,443 3" $2,191 $ 2,201 $ 2,312 $ 2,509
Indicator Rod Standard 6” and up

10" $13,878 $16,630 $18,545 4" $ 2,319 $ 2,997 $ 3,189
7 12" $21,084 $23,513 $25,114 6" $ 3,294 $ 4,235 $ 4,544
14" POA POA POA 8" $ 5,054 $ 6,799 $ 7,373
16" POA POA POA
Air Bleed Valve Standard
10" $ 7,197 $ 9,499 $10,333
8 18" POA POA POA 12" $12,003 $15,334 $15,961
16" POA POA POA
Low Headloss 18" POA POA POA

20" POA POA POA

9
Made in
100% Water Tested
10 USA
____ CONTACT FACTORY FOR
AIS l COMPLETE PRICE LISTS

*consult factory for configuration l CONTROL VALVE TECHNICAL BINDER
Compliant l CD DISC
www.flomatic.com 23
C705/CF705 Discount Code B C801/CA801 Discount Code B C901/CA901 Discount Code B

NON-MODULATING PILOT OPERATED FLOAT VALVE - SOLENOID CONTROL VALVE - Remote actuation for valve FLOW CONTROL VALVE - Maintains a pre-set maximum
For level control of storage tanks, reservoirs, or basins. position. Specify N.O. (normally open C802); N.C. (normally flow rate regardless of changing line pressures.
closed C801). .
C/CA C/CA C/CA C/CA
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED C/CA C/CA SIZE CF FLANGED* C FLANGED C FLANGED
11/4" $2,236 150# 150# 300# SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#
11/2" $2,334 $ 2,468 $ 2,690 11/2 " $ 2,213
150# 150# 300#
2" $2,356 $ 2,742 $ 2,821 11/4" $1,772 2" $ 2,285 $ 2,344

21/2 " $2,601 $ 2,722 $ 2,827 $ 2,982 11/2" $1,772 $ 1,911 $ 2,134 21/2 " $ 2,640 $ 3,300 $ 3,522
3" $ 2,758 $ 2,870 $ 3,066 2" $1,803 $ 2,185 $ 2,265 3" $ 2,680 $ 3,410 $ 3,539
4" $ 3,076 $ 3,531 $ 3,738 21/2 " $2,153 $ 2,165 $ 2,270 $ 2,425 4" $ 2,955 $ 4,072 $ 4,263
6" $ 3,851 $ 4,793 $ 5,102 3" $2,172 $ 2,201 $ 2,312 $ 2,509 6" $ 4,357 $ 5,441 $ 5,752
8" $ 5,610 $ 7,356 $ 7,930 4" $ 2,319 $ 2,997 $ 3,189 8" $ 6,278 $ 8,210 $ 8,783
10" $ 7,753 $10,056 $10,889 6" $ 3,294 $ 4,235 $ 4,544 10" $ 8,177 $ 11,318 $ 12,155
12" $12,560 $15,891 $ 16,518 8" $ 5,054 $ 6,799 $ 7,373 12" $12,992 $ 16,640 $ 17,268
14" POA POA POA 10" $ 7,197 $ 9,499 $ 10,333 14" POA POA POA
16" POA POA POA 12" $12,003 $15,334 $ 15,961 16" POA POA POA
6 18" POA POA POA
20" POA POA POA
* Reduced cavitation configuration. * Reduced cavitation configuration.
316SS BALL VALVE B

NSF/ANSI 61
* Reduced cavitation configuration. Discount Code
Certified Valves
C1001/CA1001 Discount Code B C000 MINI
W ! 316SS BALL VALVE - Full Port, FNPT connection, drilled and
NE
tapped for 2 bolt mounting pad, SS locking handle.
Temp Max: 400° F Pressure Max: 1000 PSI
SIZE PART NUMBER LIST PRICE

1/ " SSBV1000-02 $ 27.00
4
3/ " SSBV1000-03 $ 27.00
8
1/ " SSBV1000-05 $ 32.00
2
3/ " SSBV1000-07 $ 43.00
4
1" SSBV1000-10
HYDRAULIC CHECK VALVE - Closes to prevent flow reversal. HYDRAULIC CONTROL VALVE - Water or Air operated.
Adjustable opening & closing speed controls. $ 66.00
11/4" SSBV1000-12 $ 99.00
Temp Max: 180° F (80° C) Pressure Max: 400 PSI (27.5 bar)
C/CA C/CA SIZE PART NO. WGT (Lbs) LIST PRICE 11/2 " SSBV1000-15 $ 143.00
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 3/ "
8 C000AAA 2 $ 194.00 2" SSBV1000-20 $ 209.00
1/ " C000AA 2 $ 220.00
PRESSURE GAUGES B
150# 150# 300#
2
11/2 " $1,281 $ 1,354 $ 1,577 3/ "
4 C000AA 3 $ 234.00
2" $1,359 $ 1,627 $ 1,708 Discount Code
1" C000A 5 $ 240.00
21/2 " $1,647 $ 1,608 $ 1,760 $ 1,999
11/4" C000B 5 $ 259.00
3" $1,747 $ 1,758 $ 1,855 $ 2,093
4" $ 1,884 $ 2,417 $ 2,608
6" $ 2,927 $ 3,678 $ 3,987
8" $ 4,811 $ 6,600 $ 7,174
10" $ 7,103 $ 8,941 $ 9,776
12" $ 12,247 $ 14,947 $15,576
14" POA POA POA
16" POA POA POA
18" POA POA POA
20" POA POA POA
PRESSURE GAUGES - 2.5 inch dial, 1/4" MPT bottom
connection, unleaded. 1.5% accuracy Full Scale. 304SS case liquid
* Reduced cavitation configuration. glycerine filled bronze tube & connection.
RANGE PART NUMBER LIST PRICE
0-100 PSI 2-PG25-100G $21.00
0-200 PSI 2-PG25-200G $21.00
0-300 PSI 2-PG25-300G $21.00
0-400 PSI 2-PG25-400G $21.00
High Quality Valves Built to Last... 24

www.flomatic.com
FLO-TROL®
Discount Code A
Flomatic®
W!
NE
Flow Control Valves
MODEL CD900
Constant Flow Control Valve
• Constant Flow Rates Temp Max: 180˚F Pressure Max: 200 PSI
• Booster Pump Systems
• Domestic Water Systems
• Sizes 3/8” thru 3” (0.2 - 120 GPM*) !"#$%&'( )%*+,-.
!"#$%&'() /"0"123-(%-!%1+4- !"#$%&'()
• NSF/ANSI 61 and 372 Certified !"#-.+#"/))0#12")34)425(+'6&'#7
*%+&), )3%##-5+6+3+'$+ 9'5&

• Stainless Steel Construction 343:;< 7)89: ;%*+1-)!)89:-<=>?-@-<=>?-89:-7A; D----BC98:
343:;= 7)89B ;%*+1-)!)89B-<=>?-@-<=>?-89B-7A; D----BC98:
343>;< 7)E9: ;%*+1-)!)E9:-<=>?-@-<=>?-E9:-7A; D----BC98:
343>;= 7)E9B ;%*+1-)!)E9B-<=>?-@-<=>?-E9B-7A; D----BC98:
?G@F)0#12")343
343?;< 7)<9: ;%*+1-)!)<9:-<=>?-@-<=>?-<9:-7A; D----BC98:
Flo-Trol® automatic flow control valves

343?;= 7)<9B ;%*+1-)!)<9B-<=>?-@-<=>?-<9B-7A; D----BC98:
343@;< 7)>9: ;%*+1-)!)>9:-<=>?-@-<=>?->9:-7A; D----BC98:
343@;= 7)>9B ;%*+1-)!)>9B-<=>?-@-<=>?->9B-7A; D----BC98:
are designed to give constant flow over 343=;< 7)B9: ;%*+1-)!)B9:-<=>?-@-<=>?-B9:-7A; D----BC98:
343A;< 7)F9: ;%*+1-)!)F9:-<=>?-@-<=>?-F9:-7A; D----BC98:
a wide pressure range. Flow rates are main-
343B;< 7)G9: ;%*+1-)!)G9:-<=>?-@-<=>?-G9:-7A; D----BC98:
tained to within ±15% between 15 343C;< 7)H9: ;%*+1-)!)H9:-<=>?-@-<=>?-H9:-7A; D----BC98:
343:<;< 7)8: ;%*+1-)!)8:9:-<=>?-@-<=>?-8:-7A; D----BC98:
and 125 PSI (1 to 8.6 bar). The flow rate 343::;= 7)889B ;%*+1-)!)889B-<=>?-@-<=>?-889B-7A; D----CE9:C
34D:;< 7@89: ;%*+1-)!@89:-8?-@-8?-89:-7A; D----FG98>
varies due to manufacturing tolerances and
34D:;= 7@89B ;%*+1-)!@89B-8?-@-8?-89B-7A; D----FG98>
water temperatures. Valve bodies are 34D>;< 7@E9: ;%*+1-)!@E9:-8?-@-8?-E9:-7A; D----FG98>
34D>;= 7@E9B ;%*+1-)!@E9B-8?-@-8?-E9B-7A; D----FG98>
stainless steel (not chrome or nickel-plated 34D?;< 7@<9: ;%*+1-)!@<9:-8?-@-8?-<9:-7A; D----FG98>
34D?;= 7@<9B ;%*+1-)!@<9B-8?-@-8?-<9B-7A; D----FG98>
brass) with a Buna-N orifice (NSF/ANSI 34D@;< 7@>9: ;%*+1-)!@>9:-8?-@-8?->9:-7A; D----FG98>
:F)0#12")34D
34D@;= 7@>9B ;%*+1-)!@>9B-8?-@-8?->9B-7A; D----FG98>

61 certified). 34D=;< 7@B9: ;%*+1-)!@B9:-8?-@-8?-B9:-7A; D----FG98>
34DA;< 7@F9: ;%*+1-)!@F9:-8?-@-8?-F9:-7A; D----FG98>
34DE;< 7@C9: ;%*+1-)!@C9:-8?-@-8?-C9:-7A; D----FG98>
34DB;< 7@G9: ;%*+1-)!@G9:-8?-@-8?-G9:-7A; D----FG98>
*Consult factory for other sizes 34DC;< 7@H9: ;%*+1-)!@H9:-8?-@-8?-H9:-7A; D----CE9:C
34D:< 7@8: ;%*+1-)!@8:9:-8?-@-8?-8:9:-7A; D----CE9:C
34D:> 7@8E ;%*+1-)!@8E9:-8?-@-8?-8E9:-7A; D----CE9:C
34D:= 7@8B ;%*+1-)!@8B9:-8?-@-8?-8B9:-7A; D----CE9:C
34D:E 7@8C ;%*+1-)!@8C9:-8?-@-8?-8C9:-7A; D----CE9:C
34D>< 7@E: ;%*+1-)!@E:9:-8?-@-8?-E:9:-7A; D----CE9:C
IJKL,-M!JNL4O-"#-2-3+P"#(+3+*-(32*+023Q-%6-/"+R+S-T'$9-%6-?%UR%3%S-;2##2$V&#+((#

PRP Discount Code B BPP Discount Code B CV80S6 Discount Code B

PRP- 3/8" Pressure Reducing Pilot in Unleaded BPP - Back Pressure Reducing Pilot in Stainless CV80S6 CHECK VALVE- All 316SS body with Delrin poppet
Bronze or 316 Stainless Steel* – Enables automatic Steel - Enables automatic control valves to sustain a preset and Buna-N seal. Threaded female x female connection.
control valves to reduce inlet pressure to a preset outlet pressure inlet pressure. Also enables control valve to relieve pressure Temp Max: 180° F (82 C) Pressure Max: 400 PSI
and maintain it irregardless to what fluctuations in flow occur. upon reaching a preset inlet pressure.
SIZE PART NO. WGT LIST PRICE
3/ " 5159 .43 $ 110.00
8
1/ " 4029 .59 $ 145.00
PART NO. SPRING RANGE LIST PRICE
160100SA 5-80 PSI
2
$450.00
LIST PRICE
PART NO. SPRING RANGE LIST PRICE STAINLESS
152100A 5-80 PSI $250.00 $390.00 160100SB 25-125 PSI $450.00
152100B 25-125 PSI $250.00 $390.00 160100SC 2-35 PSI $450.00
152100C 2-35 PSI $250.00 $390.00 160100SD 30-300 PSI $450.00
152100D 30-300 PSI $250.00 $390.00
* For stainless steel, put “S” before letter and after part number.
TEST COCKS Discount Code B FC4 Discount Code B Y STRAINER Discount Code B
FC -20
TEST COCKS- Unleaded Bronze test cocks, full port standard. FLOW CONTROL- Adjustable restrictor that has free flow in Y STRAINER- Unleaded Bronze body, 20 mesh stainless
SIZE PART NO. WGT. CASE QTY. LIST PRICE the direction of the arrow on the body and operates as a steel strainer. Furnished with clean out plug.ction as M
needle valve in the reverse direction.
1/ "x1/ " 9383397E .05 4 $10.50
4 4
SIZE PART NO. LIST PRICE
1/ "x1/ " 3/ " Inlet x 1/ " Outlet 8710E $ 25.00
9383395E .05 4 $10.50
SIZE PART NO. LIST PRICE
8 4 3/ " FC4 $ 195.00
8 4
8
See page 21 for other sizes.
ACP
MODEL 165 Discount Code B SOLENOID VALVE Discount Code B MINI BALL VALVE Discount Code B
Mini Ball Valve
ACP - Accelerator Pilot in Unleaded Bronze - It is SOLENOID VALVE- For on off control used to alternately MINI BALL VALVE- Mini ball valves are a quater turn full
used in systems to control flow by applying an independent apply pressure to and exhaust pressure from the main valve ported on off isolation valves used on external control valve
pressure to the diaphragm. Enables automatic control valves body cover. Valves are specified either valve body cover. Valves pilot controls. 150#
to rapidly vent water from control diaphragm, thus allowing are 3 way 120V and are specified either normally open or closed. 150#
3/ " 149B5369 $ 11.00
PART NO.
quicker main valve opening.
8
SIZE PART NO. DESCRIPTION LIST PRICE
1/ " 8853 Open $ 290.00
4
1/ " 8862 Closed $ 290.00
4
SIZE PART NO. LIST PRICE * Other types available.

1/ "
2 165200 $750.00

www.flomatic.com
SIZING GUIDE for PILOT OPERATED VALVES
In order to insure pressure control and avoid excessive noise and maintenance expense, extreme care must
be taken when sizing the throttling valve for a specific application. Although both pressure conditions and flow
(velocity) are contributing factors, field experience has determined that flow rate is the most critical factor and
that proper valve sizing can be attained through consideration of the flow rate alone.
The maximum flow rates in tables below for Model C (full ported valves) are based on a velocity of 15 feet per
second, feet/second or (4.6 meter per second). The throttling valve is capable of handling larger flows for short-
er periods of time; however, the increase in maximum flow should be limited to 25% of the above values.
Minimum flow rates are based on 0.5 feet/second flow rate (0.15 meter per second). Valve should be selected to
be opened between 20-30% for best efficiencies and service life. The flow values for Model CF (Reduce ported
valves) in the table below are less as they have smaller valve orifice or seat areas.
The tables below indicate the desired throttling valve size (inches) for designated maximum and minimum flow
rates in gallons per minute (GPM):
Valve Body
Flow 11⁄2” 2” 21⁄2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 30” 36”
Type (Inch)
Model C Min 2.5 4 7 11 20 40 80 120 180 240 300 400 500 700 1000 –
Full Ported Max 90 150 230 340 600 1,300 2,400 3,700 5,200 7,200 8,500 12,000 14,000 21,000 32,000 –
Model CF Min _ _ _ 7 11 20 40 80 120 180 240 300 400 500 700 1000
Reduced
Ported Max _ _ _ 230 340 600 1,300 2,400 3,700 5,200 7,200 9,500 12,000 14,000 21,000 32,000
Model CI Min – 2 2 2 6 8 25 – – – – – – – – –
Diaphragm Max – 110 132 132 264 1020 1180 – – – – – – – – –
CONTROL VALVE 800.833.2040
Cavitation Chart (Inlet Pressure vs. Outlet Pressure)

300
280
260 NOTE: CAVITATION ZONE

Not recommended Outlet Pressure
240 Consult Factory
220
200
Inlet Pressure (psi) Up Stream
180
160 OK ZONE
140 Recommended Outlet Pressure
Operating ZONE
120 For Automatic Pressure Regulating Valves (ACV)
100
Ru of
Rul
Rule o Thumb:
Th
Thu
Thum
Thumb
T
80 Inle
Inl
I
In Vs. O
Vs
Inlet V Outlet = M
Outle
Outl
Out
Ou 3: 1
Max 3
Ma
60
Outlet Pressure (PSIG) į
40 Minimum Outlet Pressure (PSIG) į
20
0
0 25 50 75 100 125 150
Outlet Pressure (psi) Down Stream
ZZZIORPDWLFFRP

C150EHF Discount Code A C150E Discount Code A C150ET Discount Code A
PRESSURE REDUCING 800.833.2040

PRESSURE REDUCING VALVE (PRV)- Model PRESSURE REDUCING VALVE (PRV)- Model PRESSURE REDUCING VALVE (PRV)- Model
C150EHF when properly installed will regulate high C150E when properly installed will regulate high C150ET when properly installed will regulate high
upstream (inlet pressure) to a lower regulated down- upstream (inlet pressure) to a lower regulated down- upstream (inlet pressure) to a lower regulated down-
stream (outlet pressure) constant pressure within a range stream (outlet pressure) constant pressure within a range stream (outlet pressure) constant pressure within a range
regardless ofwater flow. This is accomplished by an regardless ofwater flow. This is accomplished by an regardless ofwater flow. This is accomplished by an
adjustable spring loaded balancing valve factory set to adjustable spring loaded balancing valve factory set to adjustable spring loaded balancing valve factory set to
automatically regulate the downstream pressure. automatically regulate the downstream pressure. automatically regulate the downstream pressure.
High flow in to 70 GPM NSF/ANSI 61 Certified by IAPMO R&T, 1⁄2” through 11⁄4” NSF/ANSI 61 Certified by IAPMO R&T.
ASSE® Listed 1003, IAPMO® listed ASSE® Listed 1003, IAPMO® listed
NSF/ANSI 61 Certified by IAPMO R&T.
Certified for City of Los Angeles Certified for City of Los Angeles
ASSE® Listed 1003, IAPMO® listed
Certified for City of Los Angeles Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
Factory set at 50 PSI Factory set at 50 PSI
Factory set at 50 PSI Part numbers are for 15 - 75 PSI range Part numbers are for 15 - 75 PSI range
Part numbers are for 15 - 75 PSI range SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
1/ " C150099E 2.2 $ 188.00 1/ " C150099ET 2.2 $144.00
SIZE PART NO. WGT. LIST PRICE 2 2
3/ " C150000E 2.2 $ 194.00 3/ " C150000ET 2.2 $150.00
4 4
11/4 " C150002EHF 5.2 $800.00
1" C150001E 3.5 $ 219.00 1" C150001ET 3.5 $194.00
11/4 "* C150002E* 5.2 $ 414.00
11/2 " C150003E 15 $ 940.00
Part numbers are for 15 - 150 PSI range Part numbers are for 15 - 150 PSI range
SIZE PART NO. WGT. LIST PRICE 2" C150004E 15 $1,010.00 SIZE PART NO. WGT. LIST PRICE
11/4 " C150102EHF 5.2 $800.00 1/ " C150199ET 2.2 $144.00
2
3/ " C150100ET 2.2 $150.00
Part numbers are for 15 - 150 PSI range
See 11/2" & 2" sizes C150E. 4
SIZE PART NO. WGT. LIST PRICE 1" C150101ET 3.5 $194.00
1/ " C150199E 2.2 $ 188.00
2
3/ " C150100E 2.2 $ 194.00
4
1" C150101E 3.5 $ 219.00
11/4 "* C150102E* 5.2 $ 414.00
11/2 " C150103E 15 $ 940.00
2" C150104E 15 $1,010.00
*Note: 11/4" size is one size smaller restricted flow. Maximum 25

GPM, see model C150EHF for higher capacity.
Product Specifications
• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C)
• Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart
Model Description Inlet End-Connections Outlet

Single Union End
C150E Unleaded Valve Body Female NPT/Union w/Female NPT
Female NPT/Male NPT Female NPT/Male NPT
C150ET Unleaded Valve Body (No union nut) (No union nut)

CONSTANT PRESSURE PUMP CONTROL
! FOR PRESSURE REDUCING VALVES SEE PG. 22 & 28
CYCLE GARD ® I CYCLE GARD ® I CYCLE GARD® II

C152E Discount Code A C152ET Discount Code A CN101 Discount Code A
CONSTANT PRESSURE PUMP CONTROL 800.833.2040
DIRECT ACTING CONSTANT PRESSURE PUMP DIRECT ACTING CONSTANT PRESSURE PUMP CONSTANT PRESSURE PUMP CONTROL- Reduces rapid
CONTROL VALVE- Reduces rapid pump cycling and maintains a CONTROL VALVE- Dual purpose threads, reduces rapid pump pump cycle with field adjustable by-pass and maintains a pre-set
pre-set operating pressure for wells. Threaded female x female cycling and maintains a pre-set operating pressure for wells. 1" operating downstream pressure. Flow 1-5200 GPM depending on
connection. Features a low lead alloy body & composite bell threaded female I.D. x 11/4" male O.D. on inlet and outlet size. For use with domestic water well, municipal water systems,
housing, Nylon reinforced Buna-N diaphragm. Supplied with two connections. Features a low lead alloy body & composite bell industrial water system, irrigation and agriculture.
FNPT tailpiece and union nuts. housing, Nylon reinforced Buna-N diaphragm.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 250 PSI
Factory set at 50 PSI Factory set at 50 PSI Factory set at 60 PSI
SIZE PART NO. SPRING RANGE LIST PRICE LIST PRICE
3/ " 15 - 75 PSI
SIZE PART NO. SPRING RANGE
C152000E $ 289.00
SIZE PART NO. LIST PRICE PART NO. LIST PRICE
4 $177.65 1"F & 11/4" M C152001ET 15 - 75 PSI $319.00
1" C152001E 15 - 75 PSI $ 344.00
THREADED FLANGED 150#
$177.92 11/4" CN1010B $ 2,156
1 1/4"* C152002E 15 - 75 PSI $$209.63
606.00 11/2 " CN1010C $ 2,196 CN1011C $ 1,650
11/2 " C152003E 15 - 75 PSI $$209.6
1,010.00
$389.56 SIZE PART NO. SPRING RANGE LIST PRICE 2" CN1010D $ 2,213 CN1011D $ 1,870
2" C152003E
C152004E 15 - 75 PSI$389.5$6
$ 1,155.00 1"F & 11/4" M C152101ET 15 - 150 PSI $319.00 21/2 " CN1010E $ 2,757 CN1011E $ 2,195
3" CN1010F $ 2,800 CN1011F $ 2,200
4" CN1011G $ 3,020
CYCLE GARD ® IV
SIZE PART NO. SPRING RANGE LIST PRICE
3/ " C152100E $177.65
15 - 150 PSI $ 289.00 6" CN1011J
4
$ 4,730
1" C152101E 15 - 150 PSI $177.92
CB152E A
$ 344.00 8" CN1011K $ 8,010
1 1/4"* C152102E 15 - 150 PSI $ 209.63
606.00
11/2 " C152103E 15 - 150 PSI $$389.56
Discount Code
$209.6
1,010.00 NOTE: NPT VALVES RATED TO 400 PSI
2" C152104E 15$389.56
- 150 PSI $ 1,155.00
*Note: 11/4” size is one size smaller restricted flow, maximum 25

GPM. See model C152EHF below for higher capacity.
CYCLE GARD® HY-FLOW

C152EHF Discount Code A
DIRECT ACTING CONSTANT PRESSURE PUMP CON-

TROL VALVE WITH TAPPINGS- Reduces rapid pump cycling
and maintains a pre-set operating pressure for wells. Threaded
• Slotted seat
female x female union ends or female I.D. x male O.D. on inlet and
outlet connections. Features a unleaded alloy body & composite bell
housing, Nylon reinforced Buna-N diaphragm. Supplied with two
• No drilled holes
FNPT tailpiece and union nuts. With two (2) 1⁄4” tappings for gage
and pressure switch. One (1) 3⁄4” tapping for water tank.
• Self-cleaning
Temp Max: 180°F (80C) Pressure Max 400 PSI
• No screen
HIGH FLOW DIRECT ACTING CONSTANT PRESSURE Factory set at 50 PSI
PUMP CONTROL VALVE- Model C152EHF reduces rapid pump
cycle with field adjustable by-pass and maintains a pre-set operating SIZE PART NO. SPRING RANGE LIST PRICE
1" CB152001E 15 - 75 PSI $ 356.00
downstream pressure for wells. Threaded female x female NPT con-
1" CB152101E 15 - 150 PSI $ 356.00
DRILLED
nection with hex end OD. Features a low lead alloy body and cover.
SCREEN
Nylon reinforced Buna-N diaphragm. Ideal for flows up to 70 GPM.
HOLE
1” NPT ID x 1 1/4" NPT OD-Dual purpose
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. SPRING RANGE LIST PRICE
1"F & 11/4"M CB152001ET 15 - 75 PSI $ 356.00
Factory set at 50 PSI
SIZE PART NO. SPRING RANGE LIST PRICE 1"F & 11/4"M CB152101ET 15 - 150 PSI $ 356.00
1 1/4" C152002EHF 15 - 75 PSI $950.00
1 1/4" C152102EHF 15 - 150 PSI $950.00
High Quality Valves Built to Last...

Also available 11/2" & 2" sizes.
29
CYCLE GARD® CI CYCLE GARD® CI2 CYCLE GARD® CNA

CIN101 Discount Code A CIN101-2 Discount Code A CNA101 Discount Code A

CONSTANT PRESSURE PUMP CONTROL VALVE - CONSTANT PRESSURE PUMP CONTROL VALVE - Reduces CONSTANT PRESSURE PUMP CONTROL VALVE-
Reduces rapid pump cycle with field adjustable by-pass and main- rapid pump cycle and maintains a pre-set operating downstream Reduces rapid pump cycle with field adjustable by-pass and
tains a pre-set operating downstream pressure. Ideal for irriga- pressure.Ideal for irrigation, water wells and agriculture. Built in maintains a pre-set operating downstream pressure for wells.
tion, water wells and agriculture applications. by-pass at 5 GPM. CONSULT FACTORY or control valve price list for specific options.
Factory set at 50 PSI Temp Max: 180°F (80C) Pressure Max: 250 PSI
PART # PART #
11/4 " CNA1010B $ 2,156

PART# SIZE PART# LIST PRICE SIZE THREADED FEMALE LIST PRICE FLANGED ANSI 150# LIST PRICE
SIZE
11/2 " CNA1010C $ 2,196 $ 1,650
THREADED FEMALE LIST PRICE THREADED FEMALE
11/2 " CIN1020C $ 950.00 11/2 " CIN1020C2 $ 850.00 CNA1011C
2" $ 1,100.00 $ 895.00 2" CNA1010D $ 2,213 CNA1011D $ 1,870
CIN1020D 2" CIN1020D2
21/2 " CNA1010E $ 2,757 CNA1011E $ 2,195
Max. pressure differential between inlet and outlet pressure 125 Max. pressure differential between inlet and outlet pressure 125 3" CNA1010F $ 2,800 CNA1011F $ 2,200
PSI. Consult factory for higher pressure differential. PSI. Consult factory for higher pressure differential. 4" CNA1011G $ 3,020
6" CNA1011J $ 4,730
8" CNA1011K $ 8,010
CYCLE GARD®
C153S6 A
NOTE: NPT VALVES RATED TO 400 PSI
Discount Code
BENEFITS AND FEATURES

• Maintains a Constant Pressure
• Stops Pump from Cycling
• Hydraulically Operated (no electricity required)
• Extends the Life of the Pump
Constant Pressure Pump Control Valve- Reduces rapid
pump cycling and maintains a preset system operating pressure • Eliminates Effects of Water Hammer
800.833.2040
independent from low or high flow conditions. Valve body is all
316 stainless steel female NPT connection. Supports a hanging • Many Models Available for Various Applications
load up to 3,400 lbs. and fits in 4” well casing. 1” NPT Female
connection x 11/4" male NPT, flow rates for 1-20 GPM, 11/4" 2-50 • Easy to Install
GPM.
Temp Max: 180°F Pressure Max: 400 PSI • Field Adjustable
Note: Factory set at 50 PSI standard part number below, for 40 • Downsize the Tank
PSI add “A”, 60 PSI add “B” and for new 70 PSI add “C” to end
of part number.
• Provides More Efficient Use of Appliances
SIZE PART # WGT. LIST PRICE
• 3-Year Warranty
1”F x 11/4 "M* C153002S6 3 $285.00
11/4 "F C153003S6 4.3 $430.00
11/4 "F** C153003S6-3** 4.3 $430.00
*Dual purpose threads

**3 GPM bypass recommended for 3 HP and 5 HP pump

MINIAIR® Discount Code B
MINIAIR®- Cast iron fusion bonded epoxy coated body-stainless

steel trim. Threaded female x female connections. Stainless seat
with Viton o-ring. Small orifice. Consult bulletin # 280 for details.
Vents under line pressure.
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
INLET OUTLET PART NO. WGT. LIST PRICE

3/ " 3/ " 6500 7 $ 206.00
8 8
1/ " 3/ " 6501 7 $ 230.00
2 8
3/ " 3/ " 6502 7 $ 255.00
4 8
1" 1/ "
2 6503 7 $ 284.00
2" 1/ "
2 6504 45 $ 762.00
CONSULT FACTORY for full line of sizes available.
COMBOAIR® Discount Code B

AIR RELEASE 800.833.2040
MAXIAIR® B WELLAIR® B
COMBOAIR®- Cast iron body-stainless steel trim. Combines
Discount Code Discount Code features of Miniair® and Maxiair® in one housing. Small orifice is
3/32” in the 1” valve, 3/16” in the 2” and 3” sizes.

Inlet Pressure Max: 1”– 150 PSI, 2”-3” – 250 PSI

1" 1" 6540 27 $ 546.00
2" 2" 6541 72 $ 966.00
3" 3" 6542 114 $ 2,306.00
4" 4" 6543 177 $ 2,894.00
6BSE BUG SCREEN B

MAXIAIR®- Cast iron body-stainless steel trim. Threaded WELLAIR®- Similar to Maxiair® but features discharge
female x female connections. NITRILE (Buna-N) seat. Large throttling valve. Ideal for deep well applications.
orifice– equals inlet size. Vents on filling- eliminates vacuum Discount Code
under pressure loss. Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
1/ " 1/ " 6560 8 $ 628.00
2 2
1/ "
2
1/ "
2 6520 8 $ 364.00 1" 1" 6561 18 $ 770.00
1" 1" 6521 16 $ 487.00 2" 2" 6562 50 $ 1,103.00
2" 2" 6522 44 $ 795.00 3" 3" 6563 109 $ 1,829.00
3" 3" 6523 75 $ 1,186.00
4" 4" 6524 154 $ 2,058.00
6" 6" 6525 174 $ 2,868.00

CONSULT FACTORY for full line of sizes available. 6BSE BUG SCREEN - Picture shown with valve not included.
Unleaded bronze body with threaded female connection. Stainless
steel strainer with unleaded bronze. Stainless steel or plastic caps,
with nipple for installation into air valve vent.
All Air Release, Air & Vacuum and Universal 1/ " 4399E-1 0.2 $ 21.00
2
1" 4301E-1 1.2 $ 24.00
Combination Valves meet or exceed ANSI/AWWA 2" 4304E-1 2.8 $ 64.00
C512 standards. 3" 4306E-1 7.7 $ 142.00
Valves are painted with TNEMEC red. Consult factory for fusion bonded epoxy coated option.

SEWAIR-MINI® B SEWAIR-MAXI® B FEATURES/
BENEFITS
•Automatic
AIR RELEASE 800.833.2040

•Improves Flow & Pump
Efficiency
•Eliminates Restrictive
Air or Gas Pockets
•Saves Energy
•Protects Against Vacuum
•Long Body Protects Orifice
From Sewage
SEWAIR-MINI®- Cast iron body, 303 stainless steel trim. SEWAIR-MAXI®- Cast iron body, 303 stainless steel trim.
Threaded female x female connections. NITRILE (Buna-N) seat. Threaded female x female connections. NITRILE (Buna-N) seat.
1/4” orifice-for waste water application. Vents under line pres- Large orifice–equals inlet size vents on filling. Eliminates vacuum
sure. in waste water pipeline under pressure loss.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI
INLET OUTLET PART NO. WGT. LIST PRICE INLET OUTLET PART NO. WGT. LIST PRICE
2" 1/ "
2 6600 50 $ 696.00 2" 1" 6620 50 $ 963.00
3" 1/ "
2 6601 70 $ 1,077.00 2" 2" 6621 82 $ 1,820.00
3" 3" 6622 85 $ 2,101.00
4" 4" 6623 120 $ 2,942.00
For unit with backflush attachment, add “BF” to end of part number and 6" 6" 6624 210 $ 5,436.00
add list price. See Backflush on this page.
For 316SS trim, add ST to the end of the part # and 20% to the list price. For unit with backflush attachment, add “BF” to end of part number and
SEWAIR-DUAL® Discount Code B SEWAIR-COMBO® Discount Code B BACKFLUSH Discount Code B
SEWAIR-DUAL®- Cast iron body, 303 stainless steel trim. SEWAIR-COMBO®- Cast iron body, 303 stainless steel trim. BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose with
NITRILE (Buna-N) seat. Provides protection of both small and NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®, bronze shut off valves and galvanized quick disconnects. Designed
large orifices. Two body construction. but combines into one body. for pressure backflush Sewair models.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI Temp Max: 150°F (65C) Pressure Max: 175 PSI INLET PART NO. WGT. LIST PRICE
INLET OUTLET PART NO. WGT. LIST PRICE INLET OUTLET PART NO. WGT. LIST PRICE 2" BF2 12 $ 458.00
3" BF3 19 $ 747.00
2" 1" 6640 120 $ 3,089.00 2" 1" 6650 80 $ 1,767.00
2" 2" 6641 150 $ 3,522.00 2" 2" 6651 110 $ 2,649.00 CONSULT FACTORY for full line of sizes available.
CONSULT FACTORY for full line of sizes available. 3" 3" 6652 145 $ 3,800.00
For unit with backflush attachment, add “BF” to end of part number and
add list price. See Backflush on this page. For unit with backflush attachment, add “BF” to end of part number and
Valves are painted with TNEMEC red. Consulty factory for fusion bonded epoxy coated option.

Glen-Flo® Backflow Products.
Glen-Flo® products provide uncompromising reliability,
protecting potable water lines from hazardous
cross connections
800.833.2040
GFAVB Discount Code C GF8080E Discount Code C GFHB8 Discount Code C
ATMOSPHERIC VACUUM BREAKER- Designed to prevent UNLEADED DUAL CHECK VALVE- Brass body with single HOSE CONNECTION VACUUM BREAKERS-
back-siphonage. Not for potable water. union. Designed to prevent back-siphonage or backflow of water, with
Temp Max: 180°F (80C) Pressure Max: 175 PSI vandal resistant features. Not for potable water.
Temp Max: 180°F (80C) Pressure Max: 125 PSI Complies with ASSE 1024
Complies with ASSE 1001 Temp Max: 180°F (80C) Pressure Max: 125 PSI
1/ " GF8089E 2 $ 69.00
Complies with ASSE 1011
2
1/ " GF3599 1 $ 50.00
2 3/ " GF8080E 2 $ 75.00
4
3/ " 3/ " GF800E .21 $ 17.00
4 GF3500 2 $ 60.00 1" GF8081E 2 $ 85.00 4
1” GF3501 2 $ 80.00
BACKFLOW PREVENTERS
Add “FC” to end of part number for copper sweat connection.

Note: Consult factory for additional connection configurations.
GF8080S6 Discount Code C GF8200 Discount Code C
FLOMATIC FREIGHT POLICY
We offer fast delivery
• “A” & “C” Code items:

DUAL CHECK VALVE- 316 stainless steel body with single DUAL CHECK with ATMOSPHERIC VENT Continuous
union. pressure backflow preventer with an intermediate atmospheric
$1,500.00 net prepaid

Temp Max: 180°F (80C) Pressure Max: 175 PSI vent, with double union ends. Complies with ASSE 1012, not for
potable water.
• “B” Code items: FOB
Complies with ASSE 1024
Factory
3/ " GF8080S6 1.4 $ 145.00
4 SIZE PART NO. WGT. LIST PRICE
1" GF8081S6 1.4 $ 151.00 1/ "
2 GF8289 1.3 $ 87.00
11/4"* GF8082S6 2.2 $ 226.00 3/ " GF8280 1.3 $ 89.00
4
*not ASSE approved
Minimum net Order of $75.00
*With copper sweat connections
Note: Consult factory for additional connection configurations.

AWWA C515 Gate Valves
115FL Discount Code C 115PO Discount Code C 115MJ Discount Code C
GATE VALVES
FLANGED- Resilient wedge gate valves which meet revision of PUSH-ON- Resilient wedge gate valves which meet revision of AWWA MECHANICAL JOINT- Resilient wedge gate valves which meet
AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125. C515 standard, with stainless steel stem. Ring-type (push-on PVC pipe). revision of AWWA C515 standard, with stainless steel stem.
ANSI B16.1, class 125, MJ flange.
SIZE PART NO. WGT. LIST PRICE 2" 8560RT 28 $ 285.00 SIZE PART NO. WGT. LIST PRICE
21/2" 8561 38 $ 324.00 21/2" 8561RT 42 $ 312.00 2" 8560MJ 28 $ 308.00
3" 8562 56 $ 390.00 3" 8562RT 44 $ 391.00 3" 8562MJ 44 $ 514.00
4" 8563 78 $ 546.00 4" 8563RT 69 $ 516.00 4" 8563MJ 69 $ 644.00
6" 8564 138 $ 913.00 6" 8564RT 119 $ 963.00 6" 8564MJ 119 $ 1,155.00
8" 8565 214 $ 1,489.00 8" 8565RT 203 $ 1,540.00 8" 8565MJ 203 $ 1,869.00
800.833.2040
10" 8566 360 $ 2,076.00 10" 8566RT 278 $ 2,418.00 10" 8566MJ 278 $ 2,541.00
12" 8567 531 $ 3,150.00 12" 8567RT 421 $ 3,838.00 12" 8567MJ 421 $ 3,839.00
14" 8568 547 $ 5,764.50 16" 8569MJ 656 $ 5,225.00
16" 8569 719 $ 6,599.00
AWWA C509 Gate Valves

Standard 2” operating nut, for hand wheel on all C515 Gate Valves. Add “HW” to the end of the part number and add 15 % to list.
109OSY Discount Code C 109NRS Discount Code C 115NPT Discount Code C
85
OUTSIDE SCREW & YOKE- Resilient wedge gate valves FLANGED- Resilient wedge gate valves which meet revision of THREADED- Resilient wedge valve which meet AWWA 515 stan-
which meet revision of AWWA C509 standard with bronze stem AWWA C509 standard with bronze stem. ANSI B16.1, class 125. dard with SS stem with NPT connections.
and are UL/FM listed. ANSI B16.1, class 125. Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
Tapped & plugged SIZE PART NO. WGT. LIST PRICE
Tapped & plugged 2" 8560NPT 20 $ 253.00
3" 8562NPT 32 $ 402.00
21/2" 8461 51 $ 759.00
4" 8563NPT 47 $ 538.00
21/2" 84610SY 55 $ 1,320.00 3" 8462 67 $ 880.00
6" 8564NPT 85 $ 932.00
3" 84620SY 74 $ 1,540.00 4" 8463 88 $ 968.00
4" 84630SY 103 $ 1,870.00 6" 8464 138 $ 1,375.00
6" 84640SY 158 $ 2,970.00 8" 8465 214 $ 2,052.00
8" 84650SY 240 $ 4,180.00 10" 8466 360 $ 3,025.00
10" 84660SY 392 $ 6,270.00 12" 8467 531 $ 3,575.00
All gate valves standard open left. Consult factory for right hand opening.
FLOMATIC VALVES IS AN ACTIVE MEMBER IN

THESE INDUSTRY ASSOCIATIONS AND OTHERS
www.watersystemscouncil.org
High Quality Valves Built to Last…

FLOMATIC SALES REPS
STATE DOMESTIC EMAIL INDUSTRIAL EMAIL MUNICIPAL EMAIL
WATER SYSTEMS
Alabama H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Alaska Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Arizona Desert Pacific Sales, LLC pyama.dps@gmail.com Desert Pacific Sales, LLC pyama.dps@gmail.com Desert Pacific Sales, LLC pyama.dps@gmail.com
Arkansas DJC Sales sales@dcsalesco.com Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com
California Desert Pacific Sales, LLC pyama.dps@gmail.com Desert Pacific Sales, LLC pyama.dps@gmail.com Desert Pacific Sales, LLC pyama.dps@gmail.com
Colorado Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
Connecticut Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Delaware Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
D.C Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Florida Welty Inc dgwelte@gmail.com L.J. Ruffin Larry@ruffincompanies.com L.J. Ruffin Larry@ruffincompanies.com
Georgia H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Hawaii Hawaii Engineering Services info@hiengineering.com Hawaii Engineering Services info@hiengineering.com Hawaii Engineering Services info@hiengineering.com
Idaho Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Illinois - North Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com
- South GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Indiana Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com
Iowa GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Kansas GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Kentucky Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com
Louisiana DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Maine Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Maryland Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Massachusetts Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Michigan Herder Sales therder@herdersales.com RS Controls rscontrols@rscontrols.com RS Controls rscontrols@rscontrols.com
Minnesota Rep Rite Burk bcutter@repriteburk.com Rep Rite Burk bcutter@repriteburk.com Rep Rite Burk bcutter@repriteburk.com
Mississippi Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com
Missouri - West GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
- East Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com
Montana Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Nebraska GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Nevada Desert Pacific Sale LLC pyama.dps@gmail.com Desert Pacific Sale LLC pyama.dps@gmail.com Desert Pacific Sale LLC pyama.dps@gmail.com
New Hampshire Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
New Jersey - North Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com
- South Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
New Mexico Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
New York Group One groupone_ne@yahoo.com Group One groupone_ne@yahoo.com Group One groupone_ne@yahoo.com
- NYC & Long Island Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com
North Carolina Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com
North Dakota Rep Rite Burk jnelson@repriteburk.com Rep Rite Burk jnelson@repriteburk.com Rep Rite Burk jnelson@repriteburk.com
Ohio - North WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com Daman Superior rstummer@damansuperior.com
- South WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com
Oklahoma DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Oregon Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Pennsylvania - West WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com
- East Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Rhode Island Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
South Carolina Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com
South Dakota Rep Rite Burk apcutter@repriteburk.com Rep Rite Burk apcutter@repriteburk.com Rep Rite Burk apcutter@repriteburk.com
Tennessee H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Texas DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Utah Flo-Tech rbw@flotechinc.biz Flo-Tech rbw@flotechinc.biz Flo-Tech rbw@flotechinc.biz
Vermont Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Virginia Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Washington Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
West Virginia WYNN Enterprises wynnl@wynnenterprisellc.com WYNN Enterprises wynnl@wynnenterprisellc.com WYNN Enterprises wynnl@wynnenterprisellc.com
Wisconsin Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com
Wyoming Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
CANADA
Alberta Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com
British Columbia Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com
Manitoba Quadra Sales orders@quadrasales.ca Quadra Sales orders@quadrasales.ca Quadra Sales orders@quadrasales.ca
NS, NB, PE, NFLD Partington Sales partington@earthlink.ca Partington Sales partington@earthlink.ca Partington Sales partington@earthlink.ca
Quebec Nimatec nimatec@nimatec.com Nimatec nimatec@nimatec.com Nimatec nimatec@nimatec.com
Saskatchewan Quadra Sales orders@quadrasales.ca Quadra Sales orders@quadrasales.ca Quadra Sales orders@quadrasales.ca
Latin America MA Trading latino@flomatic.com MA Trading latino@flomatic.com MA Trading latino@flomatic.com
FOR LISTING OF WORLDWIDE FLOMATIC SALES REP, VISIT OUR WEBPAGE: www.flomatic.com
35
8 WAYS YOU CAN REACH US...
1. SALES & ORDER DESK 800-833-2040 Press 2 We love to help with new orders and inquiries.
2. TECH SUPPORT 800-833-2040 Press 4 Our engineers are on stand-by for application/product support.
CONDITIONS OF SALE
3. MARKETING DEPT. 800-833-2040 Press 3 Use this line to reach the sales & marketing group.
4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.
518-761-9798
5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.
6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.
7. E-MAIL ORDERS sales@flomatic.com This is a quick and easy way to send us a message and communicate with us.
8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.
Glens Falls, NY 12801-4424
Flomatic who we are
Follow us on:
Flomatic Conditions of Sale LIMITED FIVE (5)-YEAR WARRANTY (Enviro Check® and Enviro Foot
TERMS OF SALE Valves) Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizes
PRICE up to 4”, are free from defects in materials and workmanship. Flomatic will
Prices at date of shipment will apply. Prices are subject to change without notice. replace, upon return authorization approval number, any ENVIRO CHECK® OR ENVI-
ACCEPTANCE RO FOOT VALVE covered by this warranty that is found to be defective within five
Orders are accepted subject to approval of credit. Delivery is subject to strikes, years from the time of sale. This warranty will be void if the product has been
accidents, or other causes beyond our control. modified in any way by the purchaser, or is subjected to unreasonable use.
ERRORS, SHORTAGES, ETC. These limited warranties extend to the original purchase from Flomatic only; they
All claims for errors, shortages, etc. must be made within 10 days of delivery. do not extend to any other purchaser or transferee.
CANCELLATIONS OF ORDERS EXCLUSION OF WARRANTIES
Orders for standard catalog products may be cancelled only if notice is received Flomatic makes no warranties, expressed or implied, with respect to its valves,
prior to the date of shipment. other than the expressed limited warranties described herein. The implied war-
RETURNS ranties of merchantability and fitness for a particular purpose are hereby dis-
Merchandise in new and saleable condition may be returned within one year after claimed by Flomatic . There are no warranties that extend beyond the description
purchase on a freight prepaid basis for credit upon return authorization approval on the face hereof.
number, subject to inspection and acceptance at our plant. A 25% restocking WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEAR
charge and original freight allowance, if any, will be deducted from the credit. FACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED
Special order products are nonreturnable, or at manufacturer’s option. OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN
MINIMUM NET ORDER TERMS FREIGHT CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.
$75.00 1% ten days, net 30 A&C Code $1,500 USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATION
B Code F.O.B Factory IS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIES
WARRANTIES CONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE.
800.833.2040
LIMITED ONE (1)-YEAR WARRANTY (Complete Product Line)
Flomatic Corporation warrants that its products are free from defects in materials EXCLUSION OF INCIDENTAL
and workmanship. Flomatic will replace any valve covered by this warranty that is AND CONSEQUENTIAL DAMAGES
found to be defective within one year, unless otherwise stated below, from the time In no event shall Flomatic be liable for incidental or consequential damages,
of sale. This warranty will be void if the product has been modified in any way by including but without limitation, damages of personal injuries resulting from the
the purchaser, or is subjected to unreasonable use. negligence of Flomatic, which may arise from the manufacture, sale, purchase and
LIMITED THREE (3)- YEAR WARRANTY (Automatic Control Valves) /or use of Flomatic valves. It being intended that purchaser’s exclusive remedy is
Flomatic Corporation warrants that its Automatic Control Valves are free from limited to replacement of defective products. Some states do not allow the exclusion
defects in materials and workmanship for the period of three (3) years after ship- or limitation of incidental or consequential damages, or limitation on how long an
ment. Flomatic will repair or replace any parts or components that are found to be implied warranty lasts, so that the above limitations may not apply to you. Contact
defective within three years from the time of its shipment. Components utilized by your distributor or Flomatic at address shown if you have any questions about the
Flomatic but manufactured by others will be warranted only to the extent of the coverage of this warranty or service under this warranty. This warranty gives you
guarantee of that manufacturer. This warranty will be void if the valve or its con- specific legal rights, and you may have other rights which vary from state to state.
trols have been modified without factory authorization or if it is subjected to unusu-
al operating conditions or if it is used for an application other than which it is NOTE: Flomatic reserves the right the change and/or alter valve
intended which were not described or specified at the time of purchase. products without prior notice. Consult factory for valve specifications.
High Quality Valves Built to Last... www.flomatic.com

Automatic Control Valves
Benefits & Features
AIS-Compliant
Made in U.S.A.
Flomatic’s Automatic Control Valves are

NSF/ANSI 61 approved!
85High Quality Valves Built to Last…
Manufacturing
Plant in Upstate
New York
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. This
also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies.
Distribution By:
High Quality Valves Built to Last ...

15 Pruyn’s Island Drive
Glens Falls, N.Y. 12801-4424
800-833-2040
518-761-9797 • Fax 518-761-9798
www.flomatic.com
This book is covered under patent numbers 6,024,121/6,581,633/5,176,171/4, 971,093/7,128,088/D718,429
e-mail: flomatic@flomatic.com
and other patents.
© 2018 Flomatic Corporation YPRICE18 15M

Prys

Uploaded by

Copyright:

Available Formats

Prys

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Prys

Uploaded by

Copyright:

Available Formats

PRICE LIST APRIL 16, 2018

Rev. 3 effective October 24, 2018

Many new Flomatic valve products in

85High Quality Valves Built to Last…

• Model 80EVFD & 80SSVFD – Tapped Valves Standard

VALVES BY TYPE VALVES BY MATERIAL

Go to www.flomatic.com and type the model

number in the search Product/Site Search

High Quality Valves Built to Last... II www.flomatic.com

11/2 " 4033E 2.5 25 $ 95.16 4" 4037HTE 25 $ 1,620.00

valve features a non-spin poppet, with a NITRILE (Buna-N) seal

SIZE PART NO. WGT. CASE QTY. LIST PRICE

* VFD poppet style discontinued 4071E

See page 7 for stainless steel version Certified Valves

NOTE: ENVIRO CHECK WITH SS POPPET ADD "S"

TO END OF PART # AND 10% TO LIST.

1 High Quality Valves Built to Last...

ENVIRO CHECK® VALVES 800.833.2040

80CEVFD Discount Code A 80XBEVFD Discount Code A 100MEVFD Discount Code A

MODEL 80DI-VFD SERIES

Features & Benefits

80MDW-VFD Discount Code A 80DI-VFD Discount Code A 80DI8R-VFD Discount Code A

23/8" 7937MDW8EU* 8 $ 1,155.00

To order break-off plug, add “PLG” to part number and add

www.flomatic.com 3 High Quality Valves Built to Last...

DUCTILE IRON CHECK VALVES 800.833.2040

3" 7938 12 $ 380.00

4" 7939 26 $ 590.00

5" 4088 46 $ 1,096.00

SIZE PART NO. WGT. LIST PRICE

4"M x 4"M 4095VFD 12 $ 567.00

5"M x 5"M 4096VFD 27 $ 869.00

82DP (replaces 82) A 80 Slim Line® A

www.flomatic.com 5 High Quality Valves Built to Last...

STAINLESS STEEL CHECK VALVES 800.833.2040

* Made from bar stock, with a viton seal

80SSAVFD Discount Code A 80SSBVFD Discount Code A

80SSXBVFD - All 304 stainless steel female x female thread-

11/4 " 4042SS2VFD 1.5 36 $ 101.53 2”* 4054SS2* 2.9 16 $ 207.00

11/2 " 4043SS2VFD 2.4 25 $ 134.96

80SSXAVFD with a 1/4 " Tapped Hole on the Outlet Side

SIZE PART NO. WGT. LIST PRICE

80S6CLVFD Discount Code A 80S6MCLVFD Discount Code A 80MS6VFD Discount Code A

ALL CHECK VALVES AVAILABLE

STAINLESS STEEL CHECK VALVES 800.833.2040

1 - 316 STAINLESS STEEL

01 - PTFE AND SEAL

816 Discount Code B 816FL Discount Code B 816HS Discount Code B

2" YV0021-X-0100 7 $ 733.00 $645.00

High Quality Valves Built to Last... 8 www.flomatic.com

402S6R/402S6- 316 stainless steel body. Flanged connection

12" 2248S6 306 $ 13,000.00

CHECK VALVES 800.833.2040

High Quality Valves Built to Last... 10 www.flomatic.com

14" 2189A 690 $ 10,200.00 12" 2812LW 700 $ 7,625.00

90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B

SWING CHECK VALVES 800.833.2040

Optional strainer available for foot valve operation.

High Quality Valves Built to Last... 12 www.flomatic.com