Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 96 views

    Inspection Test Record (Itr) - A Jacket Pre-Loadout ST08-A Inspection / Test

    Uploaded by

    Momo Itachi
    The document provides inspection test record details for pre-loadout of a jacket. It outlines checks to perform for the grout connection station, color coding of lines, grout packer and pile gripper inflation systems, boat landing rigging and fittings, and post-loadout checks of sea fastenings. The fabricator is responsible for testing systems and commissioning is to be witnessed. Checks include locations of connectors, supports, accessibility and potential interference of components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Inspection Test Record (Itr) - A Jacket Pre-Loadout ST08-A Inspection / Test

    Uploaded by

    Momo Itachi
    96 views1 page
    The document provides inspection test record details for pre-loadout of a jacket. It outlines checks to perform for the grout connection station, color coding of lines, grout packer and pile gripper inflation systems, boat landing rigging and fittings, and post-loadout checks of sea fastenings. The fabricator is responsible for testing systems and commissioning is to be witnessed. Checks include locations of connectors, supports, accessibility and potential interference of components.

    Original Description:

    inspection test record

    Original Title

    STR A STR preload 3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides inspection test record details for pre-loadout of a jacket. It outlines checks to perform for the grout connection station, color coding of lines, grout packer and pile gripper inflation systems, boat landing rigging and fittings, and post-loadout checks of sea fastenings. The fabricator is responsible for testing systems and commissioning is to be witnessed. Checks include locations of connectors, supports, accessibility and potential interference of components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    96 views1 page

    Inspection Test Record (Itr) - A Jacket Pre-Loadout ST08-A Inspection / Test

    Uploaded by

    Momo Itachi
    The document provides inspection test record details for pre-loadout of a jacket. It outlines checks to perform for the grout connection station, color coding of lines, grout packer and pile gripper inflation systems, boat landing rigging and fittings, and post-loadout checks of sea fastenings. The fabricator is responsible for testing systems and commissioning is to be witnessed. Checks include locations of connectors, supports, accessibility and potential interference of components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INSPECTION TEST RECORD (ITR) - A

    JACKET PRE-LOADOUT ST08-A


    INSPECTION / TEST OK N/A P/L No.
    a. Grout Connection Station
    i. Located at Leg B3-for all Skirt Sleeve (B1-4, C1-4, B1-1a & C1-1a)
    b. Color Coding
    i. Primary Line-Green
    ii. Secondary Line-Yellow
    iii. Tertiary Line-Red
    3 • Inspect the 2” quick connect hose connector that is being used at the grout station
    (Specified by the CONTRACTOR and installed by the FABRICATOR).
    • Check the tertiary line at the pile sleeve along with the 2” Male R.O.V hose connector and
    determine that the position is at the outer region of the York Plate on the pile sleeve. ROV
    holding handles installed for ROV to hold during handling the
    valves.
    • FABRICATOR to check tertiary pipe supports and is clear from any structural
    obstruction.
    GROUTING PACKER & PILE GRIPPER INFLATION SYSTEM
    • Inspect the Pile Gripper inflation port that is provided with the secondary inflation line
    system and to determine if it is ROV accessible to the surface inflation hose.
    • Inspect the Grout Packer inflation port that is provided with the secondary inflation line
    system and to determine if it is ROV accessible to the surface inflation
    hose.
    • Ensure that low heat application at the welds in the packer area is used in
    4 accordance with the manufacturers fitting instructions.
    • Check the position of the ROV secondary hot-tap inflation port and ensure that it is
    installed facing outward of the jacket that will allow the facilitation of the ROV operations.

    • FABRICATOR is to fully test and commission the Grout Packer Inflation System, Pile Gripper
    System together with air lines, grout lines and flooding lines and flooding
    lines at the yard and to be witnessed by the CONTRACTOR.
    • The Quick Connect Panel (QCP) for the grout packer & pile gripper inflation should
    be accessible by the walkway on jacket sea deck to jacket leg B3.
    BOAT LANDING
    • Check boatlanding pre-installed rigging make-up, arrangement, ID and tie-down (if
    any)
    5
    • Check any potential interference when installing boatlanding to jacket.
    • Boat landing trail fit shall be performed by FABRICATOR and witnessed by
    CONTRACTOR.
    6 BOAT LANDING-POST LOADOUT
    • Witness MPI padeyes and shackles after lifting (if required)
    • Check for damages during loadout.
    • Check and inspect lifting riggings after lifting.
    7 JACKET POST LOADOUT
    • Check all sea fastenings.

    You might also like