Bulletin 07-04-212

Version 3

FXE (FY-FXE) Two-Piece Fluid End

DUPLEX POWER PUMP

SPECIFICATIONS:
Maximum BHP
Mud Service: 102 (76 kw)
Ind’l. Service: 133.4 (99.5 kw)
Maximum Jackshaft RPM
Mud Service: 390
Ind’l. Service: 510
No. of Pistons: 2
Stroke Length: 10 in. (254 mm)
Piston Rod Load: 13480 lbs. (6,110 kg)
Oil Capacity: 14 gal. (53 liters)
Pump Weight: 7,090 lbs. (3,216 kg)

PERFORMANCE RATINGS
FXE DUPLEX INDUSTRIAL PUMP for Oil Line, Mining and Industrial Service
Normal Operation ** Maximum Recommended Operation
Max Jack- Input HP Max Jack- Input HP *** Maximum Maximum
Liner Size Pump shaft at Max. Pump shaft at Max. Working Piston
Model Stroke Diameter Displacement RPM RPM Speed Displacement RPM RPM Speed Pressure Load
in. mm gpm lpm gpm lpm psi kg/cm2
7 1/2 191 427 1616 637 2411 305 21
7 1/4 184 398 1506 594 2248 326 23
10" 7 178 371 1404 553 2093 350 25
13480 lbs.
FXE(*) (254 6 1/2 165 319 1207 57 342 89.4 474 1798 85 510 133.4 406 29
(6,110 kg)
mm) 6 152 270 1022 403 1525 477 34
5 1/2 140 226 855 337 1276 567 40
5 127 185 700 276 1045 686 48
FXE DUPLEX MUD PUMP for Mud, Grout and Cement Service
Normal / Maximum Recommended Operation
Max Jack- Input HP *** Maximum Maximum
Liner Size Pump shaft at Max. Working Piston
Model Stroke Diameter Displacement RPM RPM Speed Pressure Load
in. mm gpm lpm psi kg/cm2
7 1/2 191 487 1843 305 21
7 1/4 184 454 1718 326 23
10" 7 178 423 1601 350 25
13480 lbs.
FXE(*) (254 6 1/2 165 364 1378 65 390 102 406 29
(6,110 kg)
mm) 6 152 308 1166 477 34
5 1/2 140 257 973 567 40
5 127 211 799 686 48
Based on 90% mechanical efficiency and 100% volumetric efficiency. Specifications subject to change without notice.

** These speeds are recommended for favorable suction conditions and consideration must be given to viscosity and character of fluids.
*** Maximum working pressure shown applies to the fluid ends. Power ends are designed for certain maximum piston rod loads, and in service the power end determines the
maximum pressure on a given size piston. Tabulated maximum pressure for any given size piston for maximum piston rod load must not be exceeded even at reduced RPM.
Fluid cylinder liners and pistons are interchangeable in all sizes except for the FXF cylinders fitted with 4 ½” parts and FXX and FXD cylinders with 5 ½” parts.
 FXE (FY-FXE)
DUPLEX POWER PUMP

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

• Surge chamber.
• Rods and pistons.
• Steel skid.
• Liners and valves.
• Stainless steel valves.
• Double-extended jackshaft with extension for one side.
• Metal packed pistons.
• Piston rods have Gardner Denver No. 1 or API No. 1
taper (optional). • Special jackshafts.
• Wood skid. • Top motor mount.
• Non-adjustable packing standard. Kevlar or double stack
packing optional.
*MODEL DESIGNATIONS
MODEL FY-FXE
Mud Service FXEA
Suction Connection: 10” NPT 150# Grout & Cement Service FXEE
Discharge Connection: 4” NPT 300# Oil Service FXEJ
Jackshaft Extension General Service FXER
Diameter: 3.25” Bronze Fitted (Water Service) FXEN
Length: 12.38”
Stroke 10”
Keyway: 12.38” L x 3/4” W x 3/4” H
Liner Size
Dimensions: Length 115.6”, Width 59.4”, Height 42.5”
Maximum 7.5”
Minimum 5"
Note: All installations must contain a pressure relief valve in Fluid End Type Cast Iron Two Piece
the discharge line near the pump to help prevent breakage.

MATERIAL SPECIFICATIONS
GENERAL MUD, GROUT and POWER END:
COMPONENT SERVICE CEMENT OIL SERVICE WATER SERVICE COMPONENT MATERIAL
Cylinder Cast Iron Cast Iron Cast Iron Cast Iron Eccentric Nodular Iron
Liners Hardened Steel Hardened Steel Hardened Steel Bronze Eccentric Gear Hardened Steel
Suction
Manifold Cast Iron Cast Iron Cast Iron Cast Iron Connecting Rods Nodular Iron
Discharge
Manifold Cast Iron Cast Iron Cast Iron Cast Iron Crossheads Cast Iron

Packing Braided Polymer Molded Convex Braided Polymer Braided Polymer Main Bearing Tapered Roller
Iron with Steel Body with Iron with Bronze with Connecting Rod
Piston Pacing Rings Nitrile Rubber Pacing Rings Pacing Rings Bearing Bronze
Crosshead Pin
Piston Rod Hardened Steel Hardened Steel Hardened Steel Bronze Bronze
Bearing
Stuffing Box Cast Iron Cast Iron Cast Iron Cast Iron
Steel Steel Steel Bronze
Valve Center Guided Wing Guided Center Guided Wing Guided
Valve Seats Steel Steel Steel Bronze

*Materials listed are furnished as standard equipment. Alternate materials available upon request.

For additional information contact your local representative or

Gardner Denver Compressor and Pump Division,
1800 Gardner Expressway, Quincy, Illinois 62301
Customer Service Department
Telephone: (800) 682-9868 FAX: (217) 224-7814
Sales and Service in all major cities. 9/01