Sony Video Camera Manual PDF

CCD-TRV128/TRV228/TRV228E/TRV328/TRV428/TRV428E
RMT-833
SERVICE MANUAL
US Model
Ver 1.0 2003. 11 Canadian Model
CCD-TRV128/TRV328
Revision History AEP Model

East European Model
North European Model
CCD-TRV228E/TRV428E
How to use
UK Model
Acrobat Reader CCD-TRV228E
E Model
CCD-TRV128/TRV228/TRV228E/TRV328/TRV428E
Australian Model
Hong Kong Model
CCD-TRV428E
Argentine Model
Brazilian Model
CCD-TRV128
M2100/M2101 MECHANISM Tourist Model

CCD-TRV428/TRV428E
SPECIFICATIONS BLOCK DIAGRAMS
SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST
DISASSEMBLY SCHEMATIC DIAGRAMS
NTSC MODEL: CCD-TRV128/TRV228/TRV328/TRV428

PAL MODEL: CCD-TRV228E/TRV428E
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987629051.pdf).

• INSTRUCTION MANUAL is shown at the end of this document.
• For MECHANISM ADJUSTMENTS, refer to the “8mm Video MECHANICAL ADJUSTMENT MANUAL IX
M2000 MECHANISM ” (9-929-861-11).
• Reference No. search on printed wiring boards is available.
• Table for differences of function of each model.
• TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
• When the machine needs to be repaired, make sure to follow the items of “LCD TYPE CHECK”.
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
www.electronicsrepair.net
VIDEO CAMERA RECORDER
TM
SERIES
SPECIFICATIONS
Video camera recorder Input/Output connectors AC Adaptor AC-L15A/L15B

S video output Power requirements
4-pin mini DIN AC 100 - 240 V, 50/60 Hz
Luminance signal: 1 Vp-p, 75 Ω (ohms), Current consumption
unbalanced 0.35 - 0.18 A
System CCD-TRV228E/428E: Power consumption
Video recording system Chrominance signal: 0.3 Vp-p, 75 Ω (ohms), 18 W
2 rotary heads, Helical scanning FM system unbalanced Output voltage
Audio recording system CCD-TRV128/228/328/428: DC 8.4 V, 1.5 A
Rotary heads, FM system Chrominance signal: 0.286 Vp-p, 75 Ω Operating temperature
Video signal (ohms), unbalanced 0°C to 40°C (32°F to 104°F)
CCD-TRV228E/428E: Audio/Video output Storage temperature
PAL color, CCIR standards AV MINIJACK -20°C to + 60°C (-4°F to + 140°F)
CCD-TRV128/228/328/428: Video signal: 1 Vp-p, 75 Ω (ohms), Dimensions (approx.)
NTSC color, EIA standards unbalanced, sync negative 56 × 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.) (w/h/
Usable cassette Audio signal: 327 mV (at output impedance d) excluding the projecting parts
8 mm video format cassette more than 47 kΩ (kilohms)), Output Mass (approx.)
Tape speed impedance with less than 2.2 kΩ (kilohms) 190 g (6.7 oz) excluding the mains lead
CCD-TRV228E/428E: Monaural minijack (ø 3.5 mm)
SP: Approx. 20.05 mm/s RFU DC OUT Rechargeable battery pack (NP-FM30)
LP: Approx. 10.06 mm/s Mini-minijack (ø 2.5 mm), DC5V Maximum output voltage
CCD-TRV128/228/328/428: DC 8.4 V
SP: Approx. 14.35 mm/s LCD screen Output voltage
LP: Approx. 7.19 mm/s Picture DC 7.2 V
Recording/playback time (using 90 min. Hi8/ 6.2 cm (2.5 type) Capacity
Digital8 video cassette) Total dot number 5.0 Wh (700 mAh)
CCD-TRV228E/428E: 123 200 (560 × 220) Dimensions (approx.)
SP: 1 h 30 min 38.2 × 20.5 × 55.6 mm
LP: 3 h General (1 9/16 × 13/16 × 2 1/4 in.) (w/h/d)
Recording/playback time (using 120 min. Hi8/ Power requirements Mass (approx.)
Digital8 video cassette) DC 7.2 V (battery pack) 65 g (2.3 oz)
CCD-TRV128/228/328/428: DC 8.4 V (AC Adaptor) Operating temperature
SP: 2 h Average power consumption (when using the 0°C to 40°C (32°F to 104°F)
LP: 4 h battery pack) Type
Fast forward/rewind time During camera recording using the viewfinder Lithium ion
(CCD-TRV228E/428E: using 90 min. Hi8/ 1.8 W
Digital8 video cassette) During camera recording using the LCD Design and specifications are subject to change
(CCD-TRV128/228/328/428: using 120 min. 2.7 W without notice.
Hi8/Digital8 video cassette) Operating temperature
Approx. 5 min 0°C to 40°C (32°F to 104°F)
Viewfinder Storage temperature
Electric viewfinder (monochrome) -20°C to + 60°C (-4°F to + 140°F)
Image device Dimensions (approx.)
CCD-TRV228E/428E: 85 × 98 × 151 mm (3 3/8 × 3 7/8 × 6 in.) (w/h/
3.0 mm (1/6 type) CCD (Charge Coupled d)
Device) Mass (Approx.)
Gross: Approx. 380 000 pixels 780 g (1 lb 11 oz) main unit only
Effective: Approx. 230 000 pixels 890 g (1 lb 15 oz) including the
CCD-TRV128/228/328/428: NP-FM30 rechargeable battery pack, Hi8/
3.0 mm (1/6 type) CCD (Charge Coupled Digital8 cassette, lens cap, and shoulder strap
Device) Supplied accessories
Gross: Approx. 320 000 pixels AC Adaptor (1)
Effective: Approx. 200 000 pixels Power cord (1)
Lens Lens cap (1)
Combined power zoom lens Shoulder strap (1)
Filter diameter: 37 mm (1 1/2 in.) Wireless Remote Commander (1)
20 × (Optical), 990 × (Digital) RMT-833: (CCD-TRV228/228E/428/428E)
F=1.6 - 2.4 A/V connecting cable (1)
Focal length Rechargeable battery pack NP-FM30 (1)
2.5 - 50 mm (1/8 - 2 in.) 21-pin adaptor (1): (AEP, UK, EE, NE)
When converted to a 35 mm still camera Camera Operations Guide (This manual) (1)
42 - 840 mm (1 11/16 - 33 1/8 in.) See page 5-23.
Color temperature
Auto
Minimum illumination
1 lx (lux) (F 1.6)
0 lx (lux) (in the NightShot plus mode)*
* Objects unable to be seen due to the dark can be
shot with infrared lighting.
—2—
Table for differences of function

Model CCD-TRV128 CCD-TRV228 CCD-TRV228E CCD-TRV328 CCD-TRV428 CCD-TRV428E
US, CND, E, AEP, UK, EE, AEP, EE, NE,
Destination E US, CND, E JE
AR, BR NE, E E, AUS, HK, JE
Remote commander ✕ a a ✕ a a
Color system NTSC NTSC PAL NTSC NTSC PAL
Mechanism deck M2100 M2100 M2101 M2100 M2100 M2101
SteadyShot ✕ ✕ ✕ a a a
LCD type Please refer to page 1-3 to discriminate the type of LCD (TYPE C or TYPE S).
• Abbreviation
AR : Argentine model CND : Canadian model JE : Tourist model
AUS : Australian model EE : East European model NE : North European model
BR : Brazilian model HK : Hong Kong model
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead-
and bridges. free mark (LF) indicating the solder contains no lead.
2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point : LEAD FREE MARK
them out to the customer and recommend their replacement. Unleaded solder has the following characteristics.
4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than
of deterioration. Point them out to the customer and ordinary solder.
recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
5. Check the B+ voltage to see it is at the values specified.
Soldering irons using a temperature regulator should be set to
6. Flexible Circuit Board Repairing about 350°C.
• Keep the temperature of the soldering iron around 270˚C Caution: The printed pattern (copper foil) may peel away if the
during repairing. heated tip is applied for too long, so be careful!
• Do not touch the soldering iron on the same conductor of the • Strong viscosity
circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than
• Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such
or unsoldering. as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
—3—
TABLE OF CONTENTS
Section Title Page Section Title Page
1. SERVICE NOTE 5. REPAIR PARTS LIST
1-1. Note for Repair ································································ 1-1 5-1. Exploded Views ···························································· 5-2
1-2. Power Supply During Repairs ········································· 1-1 5-1-1. Overall Assembly ·························································· 5-2
1-3. To Take Out a Cassette when not Eject (Force Eject) ····· 1-2 5-1-2. Front Panel Block ························································· 5-3
1-4. LCD Type Check ····························································· 1-3 5-1-3. Lens Block ···································································· 5-4
1-5. Self-diagnosis Function ··················································· 1-4 5-1-4. LCD Block ···································································· 5-5
1-5-1. Self-diagnosis Function ··················································· 1-4 5-1-5. Cabinet R Block ···························································· 5-6
1-5-2. Self-diagnosis Display ····················································· 1-4 5-1-6. EVF Block ···································································· 5-7
1-5-3. Service Mode Display ····················································· 1-4 5-1-7. Battery Panel Block ······················································ 5-8
1-5-4. Self-diagnosis Code Table ··············································· 1-5 5-1-8. MD Frame Block ·························································· 5-9
5-1-9. Cassette Compartment Assembly, Drum Assembly ··· 5-10
5-1-10. LS Chassis Block Assembly ······································· 5-11
2. DISASSEMBLY 5-1-11. Mechanical Chassis Block Assembly-1 ······················ 5-12
2-1. Flow Chart ······································································· 2-1 5-1-12. Mechanical Chassis Block Assembly-2 ······················ 5-13
2-2. Mechanism Deck Service Position ·································· 2-3 5-2. Electrical Parts List ····················································· 5-14
2-3. LCD Service Position ······················································ 2-5
2-4. Circuit Boards Location ·················································· 2-6
2-5. Flexible Boards Location ················································ 2-7
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram (1/5) ··········································· 3-1
3-6. Power Block Diagram (1/2) ··········································· 3-11
3-7. Power Block Diagram (2/2) ··········································· 3-13
4.
SCHEMATIC DIAGRAMS
4-1. Frame Schematic Diagram ·············································· 4-1
4-2. Schematic Diagrams ························································ 4-5
CD-465 (CCD IMAGER) ················································ 4-7
VC-341 (1/10)
(A/D CONVERTER, TIMING GENERATOR) ·············· 4-9
VC-341 (2/10)
(CAMERA/VTR PROCESS, LENS CONTROL) ········ 4-11
VC-341 (3/10) (LENS DRIVE) ···································· 4-13
VC-341 (4/10) (REC/PB AMP) ···································· 4-15
VC-341 (5/10) (SERVO) ··············································· 4-17
VC-341 (6/10) (CAMERA/MECHA CONTROL) ······· 4-19
VC-341 (7/10) (HI CONTROL) ···································· 4-21
VC-341 (8/10) (AUDIO, VIDEO) ································· 4-23
VC-341 (9/10) (DC CONTROL) ·································· 4-25
VC-341 (10/10) (STEADYSHOT, CONNECTOR) ······ 4-27
PD-204 (LCD DRIVER, BACKLIGHT DRIVE) ········· 4-29
SI-039 (STEADYSHOT, JACK) ··································· 4-31
FP-792 FLEXIBLE ······················································· 4-31
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-33
SS-5100, PR-5100 (CONTROL KEY BLOCK) ··········· 4-34
CF-5100 (CONTROL KEY BLOCK) ··························· 4-35
SI-039, FP-792 FLEXIBLE ·········································· 4-49

FP-228, FP-299, FP-300, FP-301, FP-302, FP-802
FLEXIBLE ···································································· 4-51
4-4. Mounted Parts Location ················································ 4-53
—4—
SECTION 1
SERVICE NOTE
1-1. NOTE FOR REPAIR

Make sure that the flat cable and flexible board are not cracked of When remove a connector, don’t pull at wire of connector.
bent at the terminal. It is possible that a wire is snapped.
Do not insert the cable insufficiently nor crookedly.
When installing a connector, don’t press down at wire of connector.

It is possible that a wire is snapped.
Cut and remove the part of gilt

which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
1-2. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
The following method is available to prevent this.
Method 1.
Use the AC power adaptor (AC-L10, AC-VQ800 etc.).
1-1
1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

1 Refer to “SECTION 2. DISASSEMBLY” to remove the mechanism deck block.
2 Disconnect CN401 (2P) of VC-341 board.
3 Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compartment.
4 Pull the timing belt in the direction of

arrow A with a pincette while pressing
the cassette compartment (take care
not to damage) to adjust the bending
of a tape.
Press the cassette compartment not to

rise the cassette compartment
Pincette [DC power supply]

A (+5V)
Timing belt
5 Let go your hold the cassette

compartment and rise the cassette
compartment to take out a cassette. A
Loading motor
Disconnect CN401
of VC-341 board.
Timing belt Adjust the bending of a tape
1-2
1-4. LCD TYPE CHECK

The LCD type can be checked with data value by connecting the adjustment remote commander.
Note: About PD-204 board and LCD module, discriminate LCD type on the machine, and replace the same type.
Preparations:
1) Connect the equipment for adjustments according to Fig. 1.
2) Connect the adjustment remote commander to VC-341 board CN007 via I/F unit for LANC control (J-6082-521-A) and CPC jig connector
(J-6082-539-A).
To operate the adjustment remote commander, connect the AC power adaptor to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F unit for LANC control.
Checking method:
1) Select page: 3, address: CC.
2) By checking the data value of display data, the type of LCD can be discriminated.
Data LCD type

64 to 67 TYPE C
40 to 43 TYPE S
CN007
1
16
CPC lid
Screw (M2)
L serices Info
LITHIUM battery (7.2Vdc)
AC adaptor AC IN
AC adaptor AC IN
Conductor side
LANC jack
Adjustment CPC jig connector
remote commander (RM-95) (J-6082-539-A)
I/F unit for LANC control

(J-6082-521-A)
1-3
1-5. SELF-DIAGNOSIS FUNCTION

1-5-1. Self-diagnosis Function 1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the self-diagnosis When problems occur while the unit is operating, the counter of the
function starts working, and displays on the viewfinder or Display viewfinder or Display window shows a 4-digit display consisting
window what to do. This function consists of two display; self- of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character
diagnosis display and service mode display. display indicates the “repaired by:”, “block” in which the problem
Details of the self-diagnosis functions are provided in the Instruction occurred, and “detailed code” of the problem.
manual.
Viewfinder Display window
C:31:11 C : 3 1 : 11
Blinks at 3.2Hz
C 31 11
Repaired by: Block Detailed Code

C : Corrected by customer Indicates the appropriate Refer to “1-5-4. Self-diagnosis Code Table”.
H : Corrected by dealer step to be taken.
E : Corrected by service E.g.
engineer 31 ....Reload the tape.
32 ....Turn on power again.
1-5-3. Service Mode Display

The service mode display shows up to six self-diagnosis codes shown in the past.
1. Display Method
While pressing the “STOP” key, set the switch from OFF to “ON”, and continue pressing the “STOP” key for 5 seconds continuously. The
service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.
Viewfinder Display window
[3] C : 3 1 : 1 1 3 C : 3 1 : 11
Lights up
[3] C:31:11
Backup No. Self-diagnosis Codes

Control Dial
Order of previous errors
2. Switching of Backup No.

By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time [3] : Occurred third time [5] : Occurred fifth time
[2] : Occurred second time [4] : Occurred fourth time [6] : Occurred the last time
3. End of Display
Turning OFF the power supply will end the service mode display.
Note: The “self-diagnosis display” data will not be erased (reset), when the lithium battery (CONTROL KEY BLOCK (CF-
5100): BT001) is removed.
1-4
1-5-4. Self-diagnosis Code Table

Self-diagnosis Code
Repaired by:
Block Detailed Symptom/State Correction

Function Code
C 0 4 0 0 Non-standard battery is used. Use the InfoLITHIUM battery.

C 2 1 0 0 Condensation. Remove the cassette, and insert it again after one hour.
C 2 2 0 0 Video head is dirty. Clean with the optional cleaning cassette.
LOAD direction. Loading does not
C 3 1 1 0 Load the tape again, and perform operations from the beginning.
complete within specified time
UNLOAD direction. Loading does not
C 3 1 1 1 Load the tape again, and perform operations from the beginning.
complete within specified time
C 3 1 2 0 T reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning.
C 3 1 2 1 S reel side tape slacking when unloading. Load the tape again, and perform operations from the beginning.
C 3 1 2 2 T reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 2 3 S reel fault. Load the tape again, and perform operations from the beginning.
C 3 1 3 0 FG fault when starting capstan. Load the tape again, and perform operations from the beginning.
C 3 1 3 1 FG fault during normal capstan operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 0 FG fault when starting drum. Load the tape again, and perform operations from the beginning.
C 3 1 4 1 PG fault when starting drum. Load the tape again, and perform operations from the beginning.
C 3 1 4 2 FG fault during normal drum operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 3 PG fault during normal drum operations. Load the tape again, and perform operations from the beginning.
C 3 1 4 4 Phase fault during normal drum operations. Load the tape again, and perform operations from the beginning.
LOAD direction loading motor time- Remove the battery or power cable, connect, and perform
C 3 2 1 0
out. operations from the beginning.
UNLOAD direction loading motor Remove the battery or power cable, connect, and perform
C 3 2 1 1
time-out. operations from the beginning.
T reel side tape slacking when Remove the battery or power cable, connect, and perform
C 3 2 2 0
unloading. operations from the beginning.
S reel side tape slacking when Remove the battery or power cable, connect, and perform
C 3 2 2 1
unloading. operations from the beginning.
Remove the battery or power cable, connect, and perform
C 3 2 2 2 T reel fault. operations from the beginning.
C 3 2 2 3 S reel fault. operations from the beginning.
C 3 2 3 0 FG fault when starting capstan.
operations from the beginning.
FG fault during normal capstan Remove the battery or power cable, connect, and perform
C 3 2 3 1
operations. operations from the beginning.
C 3 2 4 0 FG fault when starting drum.
C 3 2 4 1 PG fault when starting drum.
FG fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 2
PG fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 3
Phase fault during normal drum Remove the battery or power cable, connect, and perform
C 3 2 4 4
1-5
Self-diagnosis Code
Repaired by:
Block Detailed Symptom/State Correction

Function Code
Inspect the lens block focus reset sensor (Pin qs of CN201 of VC-
Difficult to adjust focus 341 board) when focusing is performed when the control dial is
E 6 1 0 0
(Cannot initialize focus.) rotated in the focus manual mode and the focus motor drive circuit
(IC201 of VC-341 board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin qg of CN201 of VC-
Zoom operations fault 341 board) when zooming is performed when the zoom switch is
E 6 1 1 0
(Cannot initialize zoom lens.) operated and the zoom motor drive circuit (IC201 of VC-341 board)
when zooming is not performed.
Steadyshot function does not work well.
Inspect pitch angular velocity sensor (SE752 of SI-039 board)
E 6 2 0 0 (With pitch angular velocity sensor output
peripheral circuits. *1
stopped.)
Steadyshot function does not work well.
Inspect yaw angular velocity sensor (SE751 of SI-039 board)
E 6 2 0 1 (With yaw angular velocity sensor output
peripheral circuits. *1
stopped.)
*1: STEADYSHOT model (CCD-TRV328/TRV428/TRV428E)
1-6E
SECTION 2
DISASSEMBLY HELP
2-1. FLOW CHART

Note: When you remove Cabinet (R) Block,
The following flow chart shows the disassembly procedure. or when you assembly, please slide
2 1 NS knob to the position of "ON".
NS knob 8
1
3 2 7
1 2
9 q;
5
6 qd qf
5 7 6 1
9
5
4 3 4
4
qa
8 HELP qg qs
1
3 4 6 qh 6
1 Lock ace x3 6 Lock ace x3 1 Lock ace x6 1 Tripod Screw 9 Tapping P2 x2

2 Cabi (upper) 7 Claw 2 NS knob to the position of "ON". 2 Tapping P2 x2 q; Tapping P2 x1
3 Grip belt 8 Front panel 3 Cabi (R) 3 Tapping P2 x6 qa P Cabi (M)
4 Lock ace x3 Note: Flexible board is connected. 4 VC-341: CN005 4 Claw qs PD-204: CN6005
5 Cabi (L) 9 FP-795: CN755, CN009 5 VC-341: CN002 5 CF-5100 qd PD-204: CN6001
6 VC-341: CN008 6 Tapping P2 x4 qf PD-204, LCD901, ND901
7 Claw x2 qg Tapping P2 x4
8 P Cabi (C) qh Hinge assy
4 5 8 4
1 7
3 4
3 3
7 8 5
6 1
6
6
2 2 3 1
2
5 2
1 Lift up the EVF. 5 EVF Cabi (upper) 1 VC-341: CN004 5 VC-341: CN006
2 Tapping P2 x4 6 EVF Cabi (lower) 2 VC-341: CN053 6 Tapping P2 x1 1 VC-341: CN151 4 Lock ace x2
3 Down the EVF. 7 FP-797: LCD902 3 Lock ace x3 7 Lock ace x1 2 VC-341: CN201 5 Boss
4 EVF block 8 EVF lens 4 EVF/Battely panel block 8 SS-5100 3 Lens sheet 6 Lens LSV-820A
2 2
3
7
3 1 2
8
4
1 5 6
1 1
1 Tapping P2 x4 1 VF blind sheet 5 Claw
2 Claw x2 2 VC-341: CN402, CN403, CN481 6 Open the VC-341. 1 Screw (M1.7) x3
3 P Cabi (C) 3 VC-341: CN401 7 VC-341: CN404 2 CS frame
4 Screw (M1.7) x2 8 VC-341
2-1 2-2
2-2. MECHANISM DECK SERVICE POSITION

Connection to Check the Mechanism deck
To check the mechanism deck, set the Camera or VTR to the "Forced power ON" mode. (Or, connect the control key
block (SS-5100) to the CN006 of VC-341 board and set the power switch to the "CAMERA" or "PLAY/edit" position.)
Operate the Camera functions of the zoom and focus, the VTR function using the adjustment remote commander
(with the HOLD switch set in the OFF position).
Setting the "Forced Camera Power ON" mode Exiting the "Forced Power ON" mode
1) Select page: 0, address: 01, and set data: 01. 1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and 2) Select page: D, address: 10, data: 00, and press the PAUSE
press the PAUSE button of the adjustment remote button of the adjustment remote commander.
commander. 3) Select page: 0, address: 01, and set data: 00.
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
2 1 press the PAUSE button of the adjustment remote
commander.
1
How to move up the cassette

compartment manually Mechanism deck
6 2 B
5 Press the cassette compartment
7 in the direction of the arrow A
9 A
to move it up in the direction of
the arrow B.
4
1 1
8 Lens block
3 4 6
3 2 2 Info lithium battery

3 (L series)
1 7 CPC jig connector
(J-6082-539-A)
1
6 Front panel block
1
5 Contacting
8 surface
4 4 VC-341 board
5 6
Adjustment remote
commander (RM-95)
(J-6082-521-A)
4
8
7
4 3 Cabinet R block
Eject switch
3
EVF block/
5 Battery panel block assembly
Control key block
1 6 (SS-5100)
6 AC IN AC adaptor
1
2 3 When exiting the "Forced Power ON" mode, connect the control
5 2
key block (SS-5100) to the CN006 of VC-341 board. Or, when
ejecting the cassette, connect the control key block (SS-5100) to
the CN006 of VC-341 board. and press the Eject switch.
2-3 2-4
2-3. LCD SERVICE POSITION
CPC jig connector

1
CN007 Conductor side
LCD panel 16
Back light unit

CPC jig connector
(J-6082-539-A)
PD-204 board L serices Info
AC adaptor AC IN
AC adaptor AC IN
LANC jack
Adjustment
remote commander (RM-95)

(J-6082-521-A)
2-5
2-4. CIRCUIT BOARDS LOCATION
VC-341
CD-465
SI-039
PD-204
Board Name Function

CD-465 CCD IMAGER
VC-341 A/D CONVERTER, TIMING GENERATOR, CAMERA/VTR PROCESS,
LENS CONTROL, LENS DRIVE, REC/PB AMP, SERVO,
CAMERA/MECHA CONTROL, HI CONTROL, AUDIO, VIDEO, DC CONTROL,
STEADYSHOT, CONNECTOR
PD-204 LCD DRIVE, BACKLIGHT DRIVE
SI-039 STEADYSHOT, JACK
2-6
2-5. FLEXIBLE BOARDS LOCATION
FP-797 SS-5100
FFC-005
CF-5100
FP-792
FP-795
PR-5100
2-7E
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Harness (PD-124)
Claw
Claw
Note: Close the LCD panel, when you work.
HELP
3. BLOCK DIAGRAMS
Link
OVERALL BLOCK DIAGRAM (1/5) OVERALL BLOCK DIAGRAM (5/5)
OVERALL BLOCK DIAGRAM (2/5) POWER BLOCK DIAGRAM (1/2)
OVERALL BLOCK DIAGRAM (3/5) POWER BLOCK DIAGRAM (2/2)
OVERALL BLOCK DIAGRAM (4/5)

SECTION 3 3. BLOCK DIAGRAMS
BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM (1/5) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
CD-465 BOARD VC-341 BOARD (1/4)

LENS BLOCK
IRIS Q951 CN951 CN151 PB C RF

36
IC951
CCD OUT
CCD 7 BUFFER 1 14 30
2
IMAGER IC152 ı AD1-AD10
ZOOM MOTOR FOCUS MOTOR IRIS CLPDM, S/H, AGC, 11
METER 1 – 4 12 – 14 7 PBLK, A/D CONVERTER
NIGHT M M ı 1 XSHP, (1/10)
SHOT LENS M V1-V4,RG,H1,H2 9 6 RG, H1, H2 22 19
CLP1
PLUS ı 21 2 XSHD 21 20
TEMP ZOOM FOCUS 11 8 18 15 ı
SENSOR SENSOR SENSOR H ı
16 23
14
25
1 34 16 46 47 48
V1 – V4 26
ı
4 28
IC151 PBLK
CN201 31
5 17 18 15 12 16 10 – 7 1–4 13 22 23 21 20 19 TIMING 11 MCK, CL
ZOOM FOCUS IRIS IRIS IRIS IRIS IRIS DRIVE(-) X151 GENERATOR 12
IR SWITCH
TEMP
ZM SENSE OUT
FC SENSE OUT
ZM SENSE VCC
FC SENSE VCC
ADCK
A,B,XA,XB A,B,XA,XB BIAS(+) HALL(+) HALL(-) BIAS(-) 28.636363MHz : TRV128/TRV228/TRV328/TRV428
28.375MHz : TRV228E/TRV428E
(1/10) 9 1
D 2.8V
44 AHD, AVD
5 7 17 19 2 4 21 23 1 2 5 14 8 4 OVERALL (2/5)
IC202 45
IC201 XSG1 (PAGE 3-3)
(3/10) 5 34
(3/10) XV1
ZOOM FOCUS HALL HALL HALL IRIS 41
OVERALL (3/5) XCS IC 301 ID
48
MOTOR
DRIVE
MOTOR
DRIVE
BIAS AMP GAIN DRIVE
(PAGE 3-5) 2 XRST VTR
39
40 36
V STOP
13 – 16 9 – 12 3 6 7 12 10 CAM DD ON
42 35
ZM RST
FC RST
EN1 EN0 HALL HALL HALL HALL IRIS PWM OVERALL (3/5) CK CONT 1, 2 47 38 VC SO, VC SI, XVC SCK
DIR1A DIR0A REF OFFSET AD GAIN (PAGE 3-5) 17 46 37 EN0, DIR0A,B,
XNS SW
EN1, DIR1A,B,
DIR1B DIR0B
FC RST, ZM RST
Q202 (1/2)
D 2.8V
CL 16
HALL OFFSET,
OVERALL (3/5)
HALL GAIN,
(PAGE 3-6)
HALL REF
OVERALL (2/5)
Q202 (2/2)
3 (PAGE 3-4)
CS CH, CH SO, CH SCK
ZM RST LED
FC RST LED OVERALL (3/5) VC SO, VC SI, XVC SCK
LENS TEMP AD
4 (PAGE 3-5)
IRIS PWM
XNS SW 5
TRV328/TRV428/TRV428E HALL AD, OVERALL (3/5)
SI-039 BOARD (1/2) PITCH AD (PAGE 3-5)
YAW AD
SE752 CN755 (1/2) CN009 (1/2)
LIA 1 IC271 PITCH AD XCS AU
PITCH SENSOR 26 5 8 2
STEADY BEEP
SE751 SHOT DCOUT JACK IN
LIA 2 (10/10) YAW AD
YAW SENSOR 24 7 12 18 AV JACK IN
XS JACK IN
IR ON
MIC901 LND755 INT MIC

27 4
MICROPHONE
TRV228/TRV228E/ D753, 754 24
TRV428/TRV428E (IR EMITTER) D001 25 VC SO, XVC SCK
Q751 IC801 FRQ TUNE
SIRCS PWM/ IR_ON INT MIC
IC751 LED IR DRV EN 58 AUDIO/VIDEO 26
15 16 SIRCS PWM RF SWP
DRIVE PROCESS 27
REMOTE
AUDIO L I/O (8/10)
COMMANDER 56 46
RECEIVER REC AFM
1 XSIRCS SIG
18 13
SIRCS SIG 33
PB RF 6
SP+,– 49 31
D759 XF TALLY LED OVERALL (2/5)
XF TALLY LED 51
(TALLY) 20 11 A FADE (PAGE 3-4)
9
J751 S Y I/O 1.5M DEV
S Y I/O 10
9 22 21 AU BPF
S VIDEO S C I/O 11
S C I/O FSC
OUT 5 26 17 28
XS JACK IN XS JACK IN
7 24
AUDIO L I/O
13 18
13
IC 301 Y OUT 7
J752 VIDEO I/O VIDEO I/O IC 301 C OUT OVERALL (2/5)
11 20 19 15
A/V OUT (PAGE 3-3)
AV JACK IN AV JACK IN
14 17
J753
RFU DC DCOUT JACK IN DCOUT JACK IN
1 30
OUT
SIRCS PWM
SIRCS SIG 8
XF TALLY LED OVERALL (4/5)
CONTROL KEY BLOCK (CF-5100) (1/2) CN008 (PAGE 3-8)
SP901 1 SP (+), (–)
SPEAKER 2 A : VIDEO SIGNAL
A : AUDIO SIGNAL
05
3-1 3-2
3. BLOCK DIAGRAMS
VC-341 BOARD (2/4) VIDEO HEAD
PB C RF CH
SP1
CN481 FLYING
ERASE
REC RF SP1X
187 7 6 27 5
AD1 – AD10 ı RF AGC OUT
IC301 51 9 28
196
CAMERA/VTR PB C RF IC481 SP2X
49 11 34 7
CLP1 PROCESS, ATF, REC/PB AMP
183 Q484, 485 CH
LENS CONTROL (4/10) 33
PBLK (2/10) SP2
172 SWITCH 10
Q481 – 483
MCK, CL 81
ERASE
164
AGC SLOW
HEAD
FE (X)
11
M2100/M2101
ADCK
BOTH REC
46 OSC MECHA DECK (1/2)
185 M2100: TRV128/TRV228/TRV328/TRV428
OVERALL (3/5) RP PB MODE
OVERALL (1/5)
(PAGE 3-2) 1 198 (PAGE 3-5) 12 13 M2101: TRV228E/TRV428E
DOP
7
AHD, AVD 169 DA STRB
170
DOP
XSG1 77
166
XV1
168 15
XRF AGC OFF
ID XCS IC 301 6 REC Y/MT CONT
171 98 OVERALL (3/5) 3 3
V STOP 99
XRST VTR 11 (PAGE 3-5) RF AGC CONT 4
REC L CONT
48
167 25 MT FO 38
5 15
EN0, DIR0A, B, DOC DET
148 26 12 39
EN1, DIR1A, B RP IR
ı 24 8
153 AFC F0 ADJ AFC F0 ADJ REC BIAS
66 23 IC251 21 32
FC RST, ZM RST 161 MT Q
EVR 20 19
162 (D/A CONVERTER) 14 1 47
(4/10) CN007
95 XMP/ME
ı VC SO, VC SI, XVC SCK 7 (1/3)
97 REC RF
7
Q306 PB RF 9 CPC
IC 301 Y OUT HALL OFFSET, 2
BUFFER 4 FSC HALL GAIN, BPF MONI (FOR CHECK)
OVERALL (1/5)
79
3 HALL REF 17 3
(PAGE 3-2) 7 OVERALL (1/5)
ı
IC 301 C OUT 19
213 (PAGE 3-1)
VI HD XRST VTR
146 24 4 RF SWP
VI VDO IC302
67 144 23 REC AFM
Q304 CGCK CHARACTER
179 8 GENERATOR PB RF
OVERALL (3/5) AFC F0
(PAGE 3-5) 9 VCO 53 OSD P ON, (2/10) A FADE A FADE
OSD R ON, 12 OVERALL (1/5)
180 OSD L ON 19 9
1.5M DEV 1.5M DEV 6 (PAGE 3-2)
ı 17 AU BPF AU BPF
LCD HOLD 182 1 10
15 FCS
58 COLOR 1 ı 27 FRQ TUNE FRQ TUNE
ı VC SO, XVC SCK
XCS OSD, OSD SO, XOSD SCK
22 3 22
JOG VD 174 COLOR 4 28
83 ı
X1/2 SWP ı
84 177 20 XFE ON
XSG V RST 18
86 RF SWP RF SWP
ATF SAMPLE 16
87
MECHA FLD, MECHA HD,
MECHA VD 89 FSC
OVERALL (3/5) Q302
(PAGE 3-5) 10 93
94 14
PANEL R PANEL R VI VDO VIVDO 15 OVERALL (3/5)
(PAGE 3-5)
SYS V PANEL G PANEL G
88 17 BUFFER
SWP DIR PANEL B PANEL B
85 24
PANEL HD XCS OSD, OSD SO, XOSD SCK
CK CONT1, 2 101 75
100 PANEL VD
XTBC V RST 74
157 PANEL SYNC
TBC VD 76
158 EVF BLOCK
CN004 LCD902
EVF G/BW Y VIDEO IN B/W
34 6
CN002 (1/2) PANEL VD VSYNC LCD UNIT
5
PANEL HOLD PANEL HD HSYNC
4
14 NSLEEP
2
7 PANEL R, PANEL G, PANEL B
ı
5
C-SYNC/XHD PANEL SYNC
9
OVERALL (5/5) PANEL XVD PANEL VD
(PAGE 3-9) 18 8 EVF DD ON
11
ı VC SO, VC SI, XVC SCK VC SO, VC SI, XVC SCK
13 OVERALL (3/5) A : VIDEO SIGNAL
13 (PAGE 3-5)
10
XCS LCD DA XCS LCD A : AUDIO SIGNAL
A : VIDEO/SERVO SIGNAL
BL CONT BL CONT OVERALL (4/5)
4 14 (PAGE 3-8)
A : VIDEO/AUDIO/SERVO SIGNAL
05
3-3 3-4
3. BLOCK DIAGRAMS
VC-341 BOARD (3/4) M2100/M2101 MECHA DECK (2/2)

M2100: TRV128/TRV228/TRV328/TRV428
34 IC401 (3/3) M2101: TRV228E/TRV428E
(5/10) M901
XRST VTR IC401 (1/3) CN402
OVERALL (2/5) 61 DRUM MOTOR
(PAGE 3-3) 11 XCS IC 301
76 DRUM PWM
25 IC051 (1/2) Q061
DRUM VS 64
(5/10) 63
U, V, W 10
88 44 45 DRUM ERROR 6 DRUM/CAPSTAN 62 SWITCHING 65 ı M
XRST VTR LPF 67 DRUM 5
PWM 68
OVERALL (1/5) XCS IC 301 CAP PWM CAP ERROR MOTOR
89 41 43 9 61 SWITCHING
(PAGE 3-2) 2 CAM DD ON 24
DRIVE
(9/10) Q060
DRIVE
162
DRUM FG FG
EVF DD ON 38 53 FG AMP 52 3 DRUM FG
26 VC SO, XVC SCK
XCS LCD 36 SERIAL DRUM PG PG
109 INTERFACE 50 PG AMP 49 1 DRUM PG
OVERALL (2/5) XCS IC401 CL
(PAGE 3-4) 13 75 16 37 35 16 OVERALL (1/5)
(PAGE 3-2)
VC SO, VC SI, XVC SCK VC SO, VC SI, XVC SCK 77
78 DRUM FG M902
197 CN403
DRUM PG CAPSTAN MOTOR
198 74
VC SO, VC SI, XVC SCK CAP VS 75 CAP U, V, W 14
77
76 ı M
CAPSTAN 78 9
HU1, 2
71 CAP ON CAP ON MOTOR HV1, 2
165 80 10 7
CS CH, CH SO, CH SCK ı CAP FWD CAP FWD DRIVE ı HW1, 2 ı
166 1 HU, HV, HW
73 IC601 15 2
IRIS PWM CAMERA/
93
XNS SW MECHA CAP FG CAP FG 7 FG1, 2 18
110 190 4 CAPSTAN FG
OVERALL (1/5) HALL AD CONTROL FG AMP 8 16
(PAGE 3-2) 5 PITCH AD
128
(6/10)
129 DEW AD DEW AD
YAW AD 118 22 DEW SENSOR
130
XCS AU
62 209 21 S901
BEEP MODE SW A-C MODE SW A-C
200 ı ı MODE SWITCH
DCOUT JACK IN 19
111 211
AV JACK IN
185 IC401 (2/3) M903
XS JACK IN
186 LOAD LOAD, (5/10) CN401 LOADING MOTOR
IR ON
194 18 UNLOAD UNLOAD 32 69 LM (+) , LM (–) 2
LOADING M
17 33 MOTOR 72 1
LM LIM DET LM LIM DET DRIVE
15 31 D001
ZM RST LED CN404 TAPE
49 TAPE END TAPE END TAPE END (C) Q002 LED
OVERALL (1/5) FC RST LED 20 TAPE END TAPE END
(PAGE 3-1) 4 LENS TEMP AD
50
127
21 DETECT 20 2
SENSOR
TAPE TOP TAPE TOP TAPE TOP TAPE TOP (C) Q001
19 19 18 1 TAPE TOP
DETECT SENSOR
AGC SLOW
11
BOTH REC T REEL FG T REEL FG
168 119 28 T REEL 26 T REEL (+) , (–) 9 T REEL H001
RP PB MODE SENSOR
OVERALL (2/5) 169 FG AMP 27 10
(PAGE 3-4) 12 DOP
10 S REEL FG S REEL FG
203 120 24 S REEL 22 S REEL (+) , (–) 7 S REEL H002
DA STRB FG AMP 23 6 SENSOR
46
Q401
TAPE LED ON TAPE LED ON TAPE LED (K)
201 LED DRIVE 3
OVERALL (2/5) AFC F0 S001
(PAGE 3-3) 9 117 213
REC PROOF REC PROOF
13 REC PROOF
ME SW ME SW
212 12 ME/MP
HI8 MP SW HI8 MP SW 14
214 HI8 MP
XCC DOWN 15
XFE ON C. C. LOCK
170 S002
RF SWP LCD HOLD
159 163
VIVDO
OVERALL (2/5) 206 JOG VD
(PAGE 3-4) 15 80
155
X1/2 SWP
157
XCS OSD, OSD SO, XOSD SCK ı XSG V RST
154
82 ATF SAMPLE
156
134
MECHA FLD, MECHA HD, MECHA VD
3 173 OVERALL (2/5)
X601
20MHz 204 10 (PAGE 3-3)
1 SYS V
181
SWP DIR
158
95 CK CONT1, 2
96
XTBC V RST
179
TBC VD
205
63
IC701 SO, IC701 SI, IC701 SCK, XCS IC701 ı
66 CK CONT1, 2 OVERALL (1/5)
CUSTOM LED ON
52
17 (PAGE 3-2) SI-039 BOARD FP-792 FLEXIBLE
ZOOM VR AD (2/2) BOARD
OVERALL (4/5) 133
(PAGE 3-8) 19 DCOUT ON SYS V OVERALL (4/5)
OSD V
115
208
20 (PAGE 3-8)
D001 – 003
(VIDEO LIGHT)
XSYS RST Q001 CN009 CN755
9 (2/2) (2/2)
XCC DOWN 8 VIDEO LIGHT VL+ LND756
VL 16V 1 30
DRIVE
V LIGHT PWM
91
IC602
XCS EEP
EEPROM 1 87
CN007
(6/10) 86 EEP SI, EEP SO, EEP SCK
(2/3)
84
256 XCS EEP XCS EEP
85 16
CAP FG
4
SWP DIR 5 CPC
15 (FOR CHECK)
EEP SI, EEP SO, EEP SCK EEP SI, EEP SO, EEP SCK 14
1 A : SERVO SIGNAL
05
3-5 3-6
3. BLOCK DIAGRAMS
VC-341 BOARD (4/4)
CN007
(3/3)
12 LANC IN 39
CPC LANC OUT
11 40
XLANC POWER ON
(FOR CHECK) 13 8
IC701 SIRCS PWM SIRCS PWM

45
29 HI CONTROL
X701
(7/10) SIRCS SIG SIRCS SIG OVERALL (1/5)
CONTROL KEY PD-204 BOARD (1/2)
10MHz 28 41 8 (PAGE 3-2)
X702 52
BLOCK (PR-5100) XF TALLY LED XF TALLY LED
32.768kHz 10
CN6001 51
CN002
S601 CN6005 (1/2) (2/2)
PANEL 1 AD5 SYS V SYS V OVERALL (3/5)
KEY AD5
REVERSE
2
20 20 67 32 20 (PAGE 3-5)
SW
CONTROL KEY BLOCK (SS-5100)

S001
CN006
START/STOP XS/S SW KEY AD7
1 69
SW
BL CONT OVERALL (2/5)
(CHG)
BL REG 14 14 (PAGE 3-4)
OFF XPOWERSW XPOWER SW
S004 4 1 D 1.5V
POWER ON A 2.8V
XMODE SW XMODE SW
3 2
>
D 2.8V
IC051 (2/2)
AU 2.8V
MODE DC CONTROL,
EP 2.8V
S002 RESET
A 4.6V (9/10) VTR UNREG
XEJECT SW 16 XEJECT SW 4
EJECT SW AU 4.6V BATT UNREG BT901
EP 4.6V CN053
D004 Q053, 054 Q051, 052
XCHARGE LED XCHARGE LED RP 4.6V 4 +
CHG 6 12 MT 5V 3 – DC IN
VL 16V
D002
XCAM LED XCAM LED CAM –7.5V
CAMERA 8 11 CHARGE
CAM 15V 2
CONTROL
EP 13.5V
D001
XVTR LED XVTR LED PANEL –15.3V
PLAY/EDIT 9 9
6 +
EVER 3.0V BATTERY
RV001 5 S
VOUT TERMINAL
ZOOM VR ZOOM VR 12 ZOOM VR AD 1 –
LANC DC 47
Q075
20 27
CONTROL KEY BLOCK (CF-5100) (2/2) 21 HI EVER SO, HI EVER SCK 28
BATT IN
S024 31 44
CN005 VTR DD ON
35 38
XCS DD
SEL/PUSH DIAL A, B 19 DIAL A, B 79 49 26
EXEC 20 80
DIAL XRESET
45
5 59 BATT/XEXT VBAT
74 39
MENU EXEC FUNCTION KEY AD0 – KEY AD3 14 KEY AD0 – KEY AD3 ı FAST CHARGE
INIT CHARGE ON
37 D053
61 REG 3V
FAST CHARGE
SW 18 INIT CHARGE ON 40
65 38
16
BATT/XEXT
BATT SIG
Q701
S001
43 BATTERY BATT SIG
DISP/ XBATT INFO SW
6 3 CHARGE
BATT INFO SW 42
DETECTOR
S002
XRESET
RESET SW 22 73
DCOUT ON
Q002
D002 XCC DOWN XCC DOWN
CUSTOM LED ON LED 5
EASY 9 XSYS RST XSYS RST
DRIVE 47
23
ı IC 701 SO, IC 701 SI, IC 701 SCK, XCS IC 701 IC 701 SO, IC 701 SI, IC 701 SCK, XCS IC 701
LI 3V 26
BT001 3 OVERALL (3/5)
LITHIUM 19
OSD V OSD V 19 (PAGE 3-5)
BATTERY
ZOOM VR AD ZOOM VR AD
CUSTOM LED ON CUSTOM LED ON
05
3-7 3-8
3. BLOCK DIAGRAMS
PD-204 BOARD (2/2) TYPE C/S: Please refer to page 1-3

to discriminate the type of LCD.
NOTE: CN6004 Pin Name A/B
A: TYPE C MODEL
B: TYPE S MODEL
CN6001 LCD901
(2/2) CN6004
PANEL R, PANEL G, PANEL B 7 PANEL R, PANEL G, PANEL B 40 19 19

VR, VG, VB
ı ı ı ı
5 38 21 21
2.5 INCH
COLOR
VCOM LCD UNIT
IC6001 23 11
XCS LCD DA XCS LCD DA
10 45
LCD
DRIVER
N.C./SPC, GRES/EX1, GPCK/MO1, GSRT/MO2,
5
2–6 STBYB/PSG,RESET/EX2, VBC/CLS, STBYB/RES, ı
14–16 SRT/PSS1, OE/PSS2, CLR/CTR, MCLK/CLD, HCNT/SPD 10
29 12
11 46 ı
32–35 18
VC SO, VC SI, XVC SCK ı VC SO, VC SI, XVC SCK ı
OVERALL (2/5) 13 48
(PAGE 3-3) 18 C-SYNC/XHD C-SYNC/XHD
9 43 T6001, Q6002
PANEL XVD PANEL XVD
8 42 INVERTER CN6003
TRANSFORMER BL HIGH
BL REG 10
BACKLIGHT
PANEL HOLD PANEL HOLD
14 1 DRIBE
ND901
BACKLIGHT
D6004
BL CONT BL CONT BL DET BL LOW
4 28 30 3
A : VIDEO SIGNAL
05
3-9 3-10
3. BLOCK DIAGRAMS
3-6. POWER BLOCK DIAGRAM (1/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VC-341 BOARD (1/2)

BT901
BATTERY BATT SIG
TERMINAL BATT/XEXT
CN053
F002 BATT/XEXT
BATT UNREG
+ 6
FAST CHARGE
BATT SIG Q053, 054
S 5 INIT CHARGE ON INIT CHARGE ON
CHARGE
BATT GND BATT SIG
– 1 CONTROL
FAST CHARGE BATT UNREG
Q063, 065, 069

ACV UNREG Q051, 052 F003 MT 5V
+ 4 5V REG
BATT/XEXT F004
DC IN 2
F001 VTR UNREG VTR UNREG

ACV GND
– 3
D054
SI-039 43 VIN VR 34
BOARD EVER 3.0V
36 CDET VRO 41
(1/2) V OUT
VOUT 42
J753 LI 3V
VBAT 39
CN755 CN009
RFU DC (1/2) (1/2) 55 VCC1 REG 3V 40
OUT 56 VCC0 D053
RFU DC 3 28 BATT IN
CS 44
2 29 XCS DD
Q055 LD 26
HI EVER SO
54 LANC DC DIN 27
HI EVER SCK
53 SENS CLK 28
VTR DD ON
52 VCONT CTL1 38
XCTL2 47
DCOUT ON TYPE C/S: Please refer to page 1-3 to descriminate the type of LCD.
Q075
CAM DD ON A
IC051 POWER(2/2)
PD- 204 BOARD
(PAGE 3-13)
DC CONTROL, Q057 L052 L059
RESET BL REG TYPE C
SWITCHING
(9/10)
CN6004 LCD901
OUT2 58 L6004
PANEL 4.6V R6026 VSH
IN2 21 24
+INE2 14 PANEL –15.3V R6019 VGL
3
37 VREF PANEL 13.5V R6020 VGH 2.5INCH
Q056 L055 L058 1
1 DTC6 D 1.5V PANEL 2.8V VDD COLOR
SWITCHING 23 LCD UNIT
VDD
L061 L6001 FB6001 4
OUT1 57 D 2.8V R6031
IN1 20 L060 A 2.8V
30 RT
Q058 L056 L062 AU 2.8V IC6001
SWITCHING BL CONT
28
FB051 LCD DRIVER
OUT3 59
IN3 22 D055 Q066, 073
CAM –7.5V
–7.5V REG
Q062 Q064, 067, 070
CAM 15V
SWITCHING +15V REG
TYPE S
OUT7 63
Q6004, 6005,
–INE7 2 6008, 6009 CN6004 LCD901
L6004
PANEL 4.6V VSH5V 24
L051 L065 18
EP 4.6V PANEL –15.3V VGL
Q059 L057 16 3
L063 A 4.6V PANEL 13.5V VGH 2.5INCH
SWITCHING 19 1
PANEL 2.8V VSH3V COLOR
L064 17 23
AU 4.6V LCD UNIT
OUT4 60 FB6001
L066 L6001
IN4 23 RP 4.6V
VL 16V
BL CONT IC6001
Q071, 072 4 28 24
EP 13.5V LCD DRIVER
13.5V REG
Q068, 074 CN002

–15.3V REG PANEL 2.8V
17
PANEL 4.6V
18
BL REG
2
PANEL –15.3V T6001, Q6002 CN6003
16
PANEL 13.5V L6002 L6003 INVERTER ND901
19 BL REG TRANSFORMER BL HIGH
2 10 BACK
BL CONT BACKLIGHT LIGHT
BL CONT CN6001
4
DRIVE
05
3-11 3-12
3. BLOCK DIAGRAMS
3-7. POWER BLOCK DIAGRAM (2/2) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
VC-341 BOARD (2/2) CONTROL KEY BLOCK (SS-5100)

CN006 D004
BATT/XEXT IC701 CHARGE LED VDD
FAST CHARGE 5 CHG
HI CONTROL
INIT CHARGE ON (7/10)
D002
Q701 MODE LED VDD
10 CAMERA
BATTERY 43 IB SI BATT/XEXT 74
BATT SIG
CHARGE RV001
DETECTOR 42 IB SO FAST CHARGE 37
T (ZOOM) W D001
INIT CHARGE ON 38 D 2.8V
BATT UNREG 11 PLAY/EDIT
54 BATT SENSE
55 ACV SENSE
MT 5V
BATT IN 31
VTR UNREG
XCS DD 49
HI EVER SO 20
EVER 3.0V CONTROL KEY BLOCK (CF-5100)
HI EVER SCK 21 CN005
VOUT VOUT
EVER 3.0V
D 2.8V
LI 3V D 2.8V 17
VTR DD ON 35 D 2.8V FUNCTION
15
D 2.8V
D 2.8V SWITCH
4
EVER 3.0V
LI 3V LI 3V BT001
3
BATT IN LITHIUM
XCS DD D002 BATTERY
CUSTOM LED VDD
7 EASY
HI EVER SO
HI EVER SCK
VTR DD ON IC301 IC152
IC251 IC302 IC151
TRV328/TRV428/TRV428E
EVR CHARACTER CAMERA/VTR S/H. AGC. TIMING
DCOUT ON GENERATOR
(D/A CONVERTER) GENERATOR PROCESS, ATF, A/D CONVETER
A CAM DD ON
(4/10) (2/10) LENS CONTROL (1/10) (1/10)
L271 IC271 SI-039 BOARD
D753, 754
POWER (1/2)
(2/10) (2/2)
STEADY (IR EMITTER)
(PAGE 3-12) FB251 FB252 FB152 L151 FB151 SHOT
(10/10)
TRV228/TRV228E/TRV328/
TRV428/TRV428E
CN009 CN755
MT 5V
L301
L302
L303
D 1.5V D 1.5V (2/2) (2/2)
MT 5V MT 5V MT 5V 14 17 IC751
15 16 D759
REMOTE
D 2.8V D 2.8V D 2.8V D 2.8V (TALLY)
12 19 COMMANDER
RECEIVER
A 2.8V A 2.8V A 2.8V A 2.8V 9 22
AU 2.8V 10 21 TRV328/TRV428/TRV428E
AU 2.8V
CAM –7.5V CAM –7.5V CAM –7.5V
SE751, 752
CAM 15V CAM 15V CAM 15V YAW, PITCH
EP 4.6V EP 4.6V EP 4.6V SENSOR
A 4.6V A 4.6V FP-792 FLEXIBLE BOARD
Q001
AU 4.6V AU 4.6V
VIDEO VL+ LND756
RP 4.6V VL UNREG VL UNREG
LIGHT 1 30
VL 16V
VTR UNREG
DRIVE
D001 – 003
D 2.8V
MT 5V
EP 13.5V L202
(VIDEO LIGHT)
FB601
IC801 IC202
IC602 IRIS DRIVE,
IC601 AUDIO/VIDEO
EEPROM PROCESS HALL BIAS CONTROL,
CAMERA/MECHA L801
V LIGHT PWM
(6/10) (8/10) HALL GAIN CONTROL,
CONTROL HALL AMP
IC401 (6/10)
(3/10)
DRUM/ EVF BLOCK
FB401
CAPSTAN/ CN004 LCD902
LOADING V LIGHT PWM 91
EVF DD ON NSLEEP
MOTOR DRIVE EVF DD ON 26 2
L483 IC481 (5/10) ZM RST LED 49 B/W
EP 4.6V EVF 4.6V
REC/PB FC RST LED 50 3 LCD
L481 L201
VMR
AMP Q202 UNIT

VH
(4/10)
115 DCOUT ON IC201 IC001
3 17 3.3V 3.3V
162 CAM DD ON 1 3.3V REG 4 1
FOCUS/ZOOM
(10/10)
IRIS DRIVE(+)
TAPE LED (A)
MOTOR DRIVE
SENSOR VCC
CAM –7.5V
(3/10)
ZM SENS
FC SENS
CAM 15V
FG VCC
TEMP
SP1Y
SP2Y
VCC
VCC
VH+
CN481 CN404 CN403 CN201 CN151

05 4 8 4 8 17 8 13 16 18 24 12 10
3 5
CN951
CD-465
L951
VIDEO TAPE T REEL, CAPSTAN ZOOM IRIS BOARD
S REEL, HU, HV, HW
HEAD LED FG SENSOR METER
SENSOR IC951
D001
H001,002 FOCUS TEMP CCD
SENSOR SENSOR IMAGER
M2100/M2101 MECHA DECK M2100: TRV128/TRV228/TRV328/TRV428
M2101: TRV228E/TRV428E LENS BLOCK
3-13 3-14E
I
A
J
F
L
E
K
C
B
N
H
G
D
05
1
LND759 REG_GND
LND756 VL+
LND760 REG_GND
FP-792
BOARD
2
FLEXIBLE
LND754
MIC_GND
SI-039
BOARD
LENS
INT_MIC
MIC901
BLOCK
LND755
MICROPHONE
3
CN201 24P
IRIS_DRIVE(+) 24
IRIS_HALL(+) 23
KEY
IRIS_BIAS(+) 22
BLOCK
IRIS_HALL(-) 21
IRIS_BIAS(-) 20
CONTROL
(PR-5100)
DCOUT_JACK_IN
RFU_DC
RFU_DC
REG_GND
S_C_I/O
REG_GND
XS_JACK_IN
REG_GND
S_Y_I/O
REG_GND
VIDEO_I/O
REG_GND
AUDIO_L_I/O
AV_JACK_IN
SIRCS_PWM/IR_DRV_EN
MT_5V
MT_5V
XSIRCS_SIG
D_2.8V
XF_TALLY_LED
A_2.8V
A_2.8V
VREF2
LIA2
VREF1
LIA1
INT_MIC
MIC_GND
MIC_GND
VL+
CN755 30P
IRIS_DRIVE(-) 19
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
TEMP 18
TEMP 17
BOARD
CD-465
ZM_SENSE_VCC 16
FRAME SCHEMATIC DIAGRAM
FP-795 FLEXIBLE ZM_SENSE_OUT 15

LENS_DET 14
2
1
4
5
6
3
FC_SENSE_VCC 13
4-1. FRAME SCHEMATIC DIAGRAMS
9
8
7
6
5
4
3
2
1
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
FC_SENSE_OUT 12
N.C.
N.C.
GND 11
VL+
LIA2
LIA1
5
CN6005
SE_GND
SE_GND
CN009
VREF2
VREF1
MT_5V
MT_5V
A_2.8V
A_2.8V
D_2.8V
ZOOM_A 10
S_C_I/O
S_Y_I/O
RFU_DC
RFU_DC
INT_MIC
MIC_GND
MIC_GND
PANEL_REV
PANEL_REV
REG_GND
REG_GND
REG_GND
REG_GND
REG_GND
6P
VIDEO_I/O
ZOOM_B 9
XSIRCS_SIG
30P
XS_JACK_IN
AV_JACK_IN
AUDIO_L_I/O
XF_TALLY_LED
ZOOM_XB 8
CCD_OUT
GND
CAM_-7.5V
VSHT
CAM_15V
GND
RG
H1
H2
GND
V1
V2
V3
V4
DCOUT_JACK_IN
CN951 14P
ZOOM_XA 7
SIRCS_PWM/IR_DRV_EN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
IR_SWITCH 6
4-1
IR_SWITCH 5
CN6001 20P CN002 20P
FOCUS_A 4
AD5 20 20 AD5
FOCUS_B 3
PANEL_13.5V 19 19 PANEL_13.5V
6
FOCUS_XB 2
FOCUS_XA 1
SECTION 4
CN151 14P
PANEL_-15.3V 16 16 PANEL_-15.3V
CCD_OUT 14
REG_GND 15 15 REG_GND
GND 13
PANEL_HOLD 14 14 PANEL_HOLD
CAM_-7.5V 12
VC_SI(HDO) 13 13 VC_SI(HDO)
VSHT 11
VC_SO 12 12 VC_SO
CAM_15V 10
XVC_SCK 11 11 XVC_SCK
7
GND 9
XCS_LCD_DA 10 10 XCS_LCD_DA
RG 8
PD-124
CPC
C-SYNC/XHD 9 9 C-SYNC/XHD
HARNESS
H1 7
(FOR CHECK)
PANEL_XVD 8 8 PANEL_XVD
FLAT CABLE
H2 6
PANEL_R 7 7 PANEL_R
FFC-005 FLEXIBLE
GND 5
1
2
3
4
5
6
7
8
9
BOARD
10
11
12
13
14
15
16
PD-204
PANEL_G 6 6 PANEL_G
V1 4
PANEL_B 5 5 PANEL_B
V2 3
When the machine needs to be repaired,please refer to

BL_CONT 4 4 BL_CONT
PB_RF
PB_RF
EEP_SI
CAP_FG
REC_RF
EEP_SO
V3 2
CN007 16P
LANC_IN
EEP_SCK
XCS_EEP
SWP_DIR
REG_GND
REG_GND
REG_GND
BL_GND 3 3 BL_GND
BPF_MONI
LANC_OUT
page 1-3 to discriminate the type of LCD(TYPE C or TYPE S).

8
V4 1
BL_REG 2 2 BL_REG
XLANC_PWR_ON
SE_GND 1 1 SE_GND
CN404 15P
TAPE_TOP(C) 1 TAPE_TOP(C)
CN6004 24P
TAPE_END(C) 2 TAPE_END(C)
VGH/VGH 1
TAPE_LED(K) 3 TAPE_LED(K)
VSS/GND 2
TAPE_LED(A) 4 TAPE_LED(A)
9
VGL/VGL 3
REG_GND 5 REG_GND
VDD/VGLAC 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
S_REEL(-) 6 S_REEL(-)
N.C./SPS 5
S_REEL(+) 7 S_REEL(+)
GRES/EX1 6
SENSOR_VCC 8 SENSOR_VCC
FP
GPCK/MO1 7
T_REEL(+) 9 T_REEL(+)
4-2. SCHEMATIC DIAGRAMS
GSRT/MO2 8
T_REEL(-) 10 T_REEL(-)
STBYB/PSG 9
HALL_COM 11 HALL_COM
RESET/EX2 10
ME/MP 12 ME/MP
10
VCOM/VCOM 11
REC_PROOF 13 REC_PROOF
VBC/CLS 12
HI8_MP 14 HI8_MP
COLOR
LCD901
2.5INCH
STBYB/RES 13
LCD UNIT
C_LOCK_SW 15 C_LOCK_SW
SRT/PSS1 14
CN403 22P
OE/PSS2 15
DEW 22 DEW
CLR/CTR 16
M-SW(A) 21 M-SW(A)
MCLK/CLD 17
M-SW(B) 20 M-SW(B)
HCNT/SPD 18
M-SW(C) 19 M-SW(C)
11
VR/VR 19
FG1 18 FG1
VG/VG 20
FG VCC 17 FG VCC
VB/VB 21
B: TYPE S MODEL
A: TYPE C MODEL
FG2 16 FG2
VSS/GND 22
REG_GND 15 REG_GND
Note: CN6004 Pin Name A/B

VDD/VSH3V 23
CAP_U 14 CAP_U
VSH/VSH5V 24
CAP_U 13 CAP_U
VC-341 BOARD
CAP_W 12 CAP_W
FP
CAP_W 11 CAP_W
12
CAP_V 10 CAP_V
CAP_V 9 CAP_V
VH+ 8 VH+
CN6003 10P
HU1 7 HU1
BL_HIGH 10
HU2 6 HU2
N.C 9
HV1 5 HV1
N.C 8
HV2 4 HV2
N.C 7
HW1 3 HW1
13
ND901
N.C 6
HW2 2 HW2
BACKLIGHT
N.C 5
VH- 1 VH-
N.C 4
CN481 11P
BL_LOW 3
FE(X) 11 FE(X)
LED 2
FE(Y) 10 FE(Y)
LED_GND 1
GND 9 GND
SP2Y 8 SP2Y
SP2X 7 SP2X
14
GND 6 GND
FP
SP1X 5 SP1X
CN008 2P SP1Y 4 SP1Y
1 SP(+) GND 3 GND
4-3. PRINTED WIRING BOARDS
SP901
2 SP(-) GND 2 GND

SPEAKER
GND 1 GND
CN005 22P
CN402 10P
1 REG_GND
U 10 U
15
2 N.C
U 9 U
M2100/M2101 MECHANISM DECK
3 LI_3V
V 8 V
4 D_2.8V
V 7 V
5 KEY_AD0
W 6 W
6 BATT_INFO
FP
W 5 W
7 CUSTOM_LED_VDD
COM 4 COM
8 N.C
FG 3 FG
9 XCUSTOM_LED_ON
FG-PG_COM 2 FG-PG_COM
16
10 REG_GND
PG 1 PG
11 XMS_LED
12 N.C
KEY
13 MS_LED_VDD CN401 2P
BLOCK
14 KEY_AD1 LM(+) 2
15 D_2.8V LM(-) 1
LM
(CF-5100)
CONTROL
M2101: TRV228E/TRV428E
16 KEY_AD3
4-2
17 D_2.8V
17
18 KEY_AD2
19 DIAL_A
M2100: TRV128/TRV228/TRV328/TRV428
20 DIAL_B
21 REG_GND
CN006
22 XRESET
EVF_4.6V
VIDEO_IN
3.3V
CHARGE_LED_VDD
XCHARGE_LED
N.C
NSLEEP
DIG_GND
BATT_UNREG
BATT_SIG
ACV_UNREG
ACV_GND
BATT/XEXT
BATT_GND
XEJECT_SW
N.C
N.C
REG_GND
ZOOM_VR
D_2.8V
MODE_LED_VDD
XVTR_LED
XCAM_LED
XPOWER_SW
XMODE_SW
REG_GND
XS/S_SW
VSYNC
ANA_GND
HSYNC
CN053 6P
16P
CN004 8P
6
5
4
3
2
1
9
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
16
15
14
13
12
11
10
18
10 NC
9 NC
FP-797
8 ANA_GND
FLEXIBLE
7 DIG_GND
19
6 VIDEO_IN
BT901
LCD
B/W
UNIT
BATTERY
5 VSYNC
TERMINAL
LCD902
4 HSYNC
EVF BLOCK
KEY
3 EVF_4.6V
NSLEEP
BLOCK
2
1 3.3V
CONTROL
(SS-5100)
20
21
FRAME
Link
CD-465 BOARD (CCD IMAGER) VC-341 BOARD (9/10) (DC CONTROL)
VC-341 BOARD (1/10) VC-341 BOARD (10/10)

(A/D CONVERTER, TIMING GENERATOR) (STEADYSHOT, CONNECTOR)
VC-341 BOARD (2/10) PD-204 BOARD
(CAMERA/VTR PROCESS, LENS CONTROL) (LCD DRIVER, BACKLIGHT DRIVE)
SI-039 BOARD (STEADYSHOT, JACK)
VC-341 BOARD (3/10) (LENS DRIVE) FP-792 FLEXIBLE BOARD
FP-228, FP-299, FP-300, FP-301, FP-302,
VC-341 BOARD (4/10) (REC/PB AMP) FP-802 FLEXIBLE BOARD
VC-341 BOARD (5/10) (SERVO) CONTROL KEY BLOCK (SS-5100)
VC-341 BOARD (6/10)

(CAMERA/MECHA CONTROL) CONTROL KEY BLOCK (PR-5100)
VC-341 BOARD (7/10) (HI CONTROL) CONTROL KEY BLOCK (CF-5100)
VC-341 BOARD (8/10) (AUDIO, VIDEO)
COMMON NOTE FOR SCHEMATIC DIAGRAMS

THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS

(In addition to this, the necessary note is printed in each block)
(For schematic diagrams) 1. Connection

• All capacitors are in µF unless otherwise noted. pF : µ
Link
µF. 50 V or less are not indicated except for electrolytics Pattern box
and tantalums.
• Chip resistors are 1/10 W unless otherwise noted.
kΩ=1000 Ω, MΩ=1000 kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum 1m
capacitor, Because it is damaged by the heat.
• Some chip part will be indicated as follows.
Example C541 L452
22U 10UH
TA A 2520
Front of the lens
Kinds of capacitor
Case size
External dimensions (mm)
• Constants of resistors, capacitors, ICs and etc with XX

indicate that they are not used. 2. Adjust the distance so that the output waveform of
In such cases, the unused circuits may be indicated. Fig. a and the Fig. b can be obtain.
• Parts with ★ differ according to the model/destination. Yellow
H
Refer to the mount table for each function.
Magenta
White
Cyan
• All variable and adjustable resistors have characteristic Green
Red
curve B, unless otherwise noted.
Blue
• Signal name
XEDIT → EDIT PB/XREC → PB/REC
• 2: non flammable resistor
• 5: fusible resistor
• C: panel designation
A B A=B B A
• A: B+ Line
• B: B– Line Fig. a (Video output terminal output waveform)
• J : IN/OUT direction of (+,–) B LINE.
• C: adjustment for repair.
• A: VIDEO SIGNAL (ANALOG)
• A: AUDIO SIGNAL (ANALOG)
• A: VIDEO/AUDIO SIGNAL
• A: VIDEO/AUDIO/SERVO SIGNAL
• A: VIDEO/SERVO SIGNAL
• A: SERVO SIGNAL
• Circled numbers refer to waveforms. Fig.b (Picture on monitor TV)
(Measuring conditions voltage and waveform)
• Voltages and waveforms are measured between the
measurement points and ground when camera shoots When indicating parts by reference number, please
color bar chart of pattern box. They are reference values include the board name.
and reference waveforms.
(VOM of DC 10 MΩ input impedance is used)
• Voltage values change depending upon input
impedance of VOM used.)
Note : The components identified by mark 0 or Note : Les composants identifiés par une marque
dotted line with mark 0 are critical for safety. 0 sont critiques pour la sécurité.
Replace only with part number specified. Ne les remplacer que par une pièce portant
le numéro spécifie.
4-5
4-2. SCHEMATIC DIAGRAMS CD-465 BOARD
For Schematic Diagram

• Refer to page 4-41 for printed wiring board.
1 2 3 4 5 6 7 8 9
CD-465 BOARD
A CCD IMAGER
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
1 IC951 1 REC 2 IC951 2 REC 3 IC951 3 REC
R:REC MODE
P:PB MODE 7.6 Vp-p 22 Vp-p 7.6 Vp-p
B V V V
LND951
C954
XX
4 IC951 4 REC
22 Vp-p
R11.2/P0
R-7.2/P0
R-0.3/P0
R-0.3/P0
R-7.2
C
/P0
V
1 2 3 4 5 6 7
CN951 14P
NC
GND
CCD_OUT
V4
V3
V2
V1
V4
V3
14
13
IC951 5 IC951 7 REC
CCD IMAGER
V2 12 IC951
V1 11 ICX437AKA-43:TRV128
1.2 Vp-p
GND 10 /TRV228
/TRV328
VC-341
D (1/10) H2 9 /TRV428
H
VDD
SUB
ICX433AKA-43:TRV228E
RG
H2
H1
NC
CN151 H1 8
VL
/TRV428E
THROUGH THE RG 7
FFC-005 FLEXIBLE
FLAT CABLE 14 13 12 11 10 9 8
GND 6
(PAGE 4-9)
R1.3
/P0
R1.6
/P0
R12.6
/P0.3
R-7.7
/P0.4
R8.9/P0.1
R15.1/P0
CAM_15V 5
VSHT 4
9 IC951 q; REC
CAM-7.5V 3
GND 2
23 Vp-p
E CCD_OUT 1
C955 H
0.1u
R16.1/P0
L951 C951
100uH 22u
16V
Q951
2SC4178-F13F14-T1
8 IC951 qs REC
BUFFER
R11.2
/P0
R952 R10.5
2.4 Vp-p
C952 10 R953 C953
/P0 47u
F SIGNAL PATH
XX 10k 10V
NTSC: 9.54 MHz
PAL: 9.46 MHz
Precautions for Replacement of CCD Imager
VIDEO 6 IC951 qf REC 7 IC951 qd REC • The CD-465 board mounted as a repair part is not equipped
SIGNAL with a CCD imager.
3.6 Vp-p 3.6 Vp-p When replacing this board, remove the CCD imager from the
Y/CHROMA
old one and mount it onto the new one.
• If the CCD imager has been replaced, carry out all the
REC H H adjustments for the camera section.
G • As the CCD imager may be damaged by static electricity from
its structure, handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with dusts
05
nor exposed to strong light.
4-7 4-8 CD-465


1 2 3 4 5 6 7 8 9 10 11 12 13
VC-341 BOARD (1/10)

A A/D CONVERTER,TIMING GENERATOR(CAM BLOCK)
CAM_15V
XX MARK:NO MOUNT
CAM_-7.5V
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE 2 IC151 9 REC/PB REG_GND
1
∗:IMPOSSIBLE TO MEASURE THE
VOLTAGE AT THE MARKED POINTS. A_2.8V (9/10)
2.8 Vp-p
X151
B 28.636363MHz: TRV128/TRV228/TRV328/TRV428
28.375MHz: TRV228E/TRV428E D_2.8V
NTSC: 14.318 MHz
PAL: 14.187 MHz
MCK
CL
3 IC151 qa REC/PB C164
8p X151 C166 D151
R158 R160 0.01u 1SV329(TPL3)
2
C163 0.01u
XX XX
FB151 FRQ_TUNE
3.0 Vp-p 0uH R159 R161 R164 470k (4/10)
XX XX
R163
0
NTSC: 14.318 MHz
1 IC151 5 (X151) REC/PB
C PAL: 14.187 MHz C158
R2.3/P0
4.7u 2.0 Vp-p
CN151 14P
R2.8
/P0
1.3
2.8
1.5
1.3
1.4
V4
4
∗
V4 1 IC151 qs REC/PB 1.5
V3 NTSC: 28.636 MHz
V3 2 12 11 10 9 8 7 6 5 4 3 2 1 PAL: 28.375 MHz
V2
VICK(CL)
SYSCK
VDD1
CHCK
TEST
CK
VSS2
OSCO
OSCI
VSS1
PBLK
CLPDM
V2 3 3.0 Vp-p
V1
V1 4
CK_CONT1 3
GND 5 NTSC: 14.318 MHz CK_CONT2
(6/10)
D CD-465 BOARD
CN951
H2 6 PAL: 14.187 MHz C180
XX
2.8 R1.4/P0
H1 7 13 VDD2 ID 48
THROUGH THE
FFC-005 FLEXIBLE RG 8 14 VSS3 CKCONT1 47
R2.8/P0
CAM_DD_ON
4
FLAT CABLE XSHP R2.3/P0 0
GND 9
R151 R153
15 XSHP CKCONT2 46 (6/10)
(PAGE 4-7) XX
XX XSHD R2.3/P0 R2.7/P0
CAM_15V 10 16 XSHD AVD 45 XVC_SCK
VSHT 11
VSHT C152
0.001u 17 XRS
IC151 AHD 44
R2.5/P2.8
VC_SO
XVC_SCK 5
R0.4/P0 2.8 VC_SO
CAM_-7.5V 12 18 RG VDD6 43 (6/10)
TIMING GENERATOR
2.8 R2.8/P0
GND 13
2.8
19 VDD3 IC151
CXD2444AR-T4
DSGAT 42
R0.1/P0
VC_SI
VC_SI 9
E CCD OUT 14
R1.6/P0
20 VDD4
H1
XV1
RST
41
2.8 XRST_VTR (6/10)
21 40
R1.4/P0
22 H2 SEN 39
R2.2/P0 XCS_IC_301
XCS_IC_301
XCS_IC_301 7
0.5 VC_SO
23 VSS4 SSI 38 (6/10)
2.5 XVC_SCK
24 NC SSK 37
XRST_VTR
XRST_VTR 8
C151 C153 (6/10)
R-7.7/P0.5
R-7.6/P0.4
XX XX CH_SO
R15.1/P0
R-0.3/P0
R-0.3/P0
R-7.2/P0
R-7.2/P0
R2.8/P0
CH_SO
10
XSHT
XSG1
VGAT
CH_SCK
SSO
F
VM
CH_SCK
2.6
VH
NC
V2
V1
V3
VL
V4
0
CS_CH
CS_CH (6/10)
C157 25 26 27 28 29 30 31 32 33 34 35 36
R152 2.2u ID
0
AVD
AHD
C159 C162 C165
R155 C156 XX XX V_STOP
0.1u
100k 0.22u VC_SI
R162 1M
XV1
V1
V2
V3
V4
VSHT
XSG1
G
CLP1
PBLK
ADCK
L151
10uH 11
(2/10)
MCK
AD10
AD9
AD6
AD4
AD3
AD1
AD8
AD7
AD5
AD2
MCK
H R156
XX FB152
CL
CL
AD10
C177 AD10
22u AD9
12 11 10 9 8 7 6 5 4 3 2 1 4V AD9
AD8
R0.4/P1.5
R0.8/P1.5
R0.9/P1.3
R1.2/P1.3
R1.2/P1.5
R1.2/P1.4
R1.2/P1.4
R1.2/P1.4
R1.2/P1.4
R1.2/P1.4
AD8
DVSS
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
TEST
AD7
AD7
C161 2.8 2.8 CH_SCK AD6
24 23 22 21 20 19 18 17 16 15 14 13
37 38 39 40 41 42 43 44 45 46 47 48
1u DRVDD XSCK AD6
0 CH_SO AD5
C160 DRVSS SI AD5
0.1u 2.8 CS_CH AD4
I 1.5
DVSS
ADCLK
XCE
SYSV
AD3
AD4
AD3
R157 2.8 AD2
DVDD LatchSelect AD2
C154
XX
2.8
DVDD IC152 HDRST
2.8 XRST_VTR AD1
AD1
XX R2.3/P0 S/H,AGC,A/D CONVERTER
PBLK AVSS
2.7
CLPOB
IC152
AD80013AJSTRL AVSS CL
12
XSHP R2.3/P0 2.8
XSHP AVDD (5/10)
XSHD R2.3/P0 0.9 C179
XSHD VRB
1u
R2.8/P0 1.9
CLPDM VRT 6.3V
6 IC152 eh PB
J 2.8
AVDD CMLEVEL
1.4 C176
CCD IN
0.1u
CHROMA
CLPOUT
CLPBYP
CLPREF
C155 AVDD
150 mVp-p
AVDD
AVSS
AVSS
AVSS
LINE
SIGNAL PATH XX
NC
25 26 27 28 29 30 31 32 33 34 35 36
VIDEO VIDEO
SIGNAL 5 IC152 e; REC H
SIGNAL
2.8
R1/P0
R0.8/P0
R1.5/P0
0.5
2.8
0
R1.5/P0.5
CHROMA Y/CHROMA
C173 470p
PB_C_RF 13
1.2 Vp-p C172 0.22u
(4/10)
K PB REC
C171 14
C169
C167
C168
C170
0.1u
IC_801_Y_OUT
1u
1u
1u
H 0.1u
(8/10)
05
VC-341 (1/10) 4-9 4-10


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
SIGNAL PATH
VC-341 BOARD (2/10) REC REC/PB PB VIDEO SIGNAL

A CAMERA/VTR PROCESS,LENS CONTROL (CL BLOCK) CHROMA Y Y/CHROMA
Ref.signal
XX MARK:NO MOUNT
NO MARK:REC/PB MODE REC
R:REC MODE R301 XX
P:PB MODE D_2.8V
PB
D_1.5V
B L302 10uH
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
ADCK
15 L303 10uH VIDEO/SERVO
C341 XX
A_2.8V
CLP1
OSD_L_ON
OSD_R_ON
OSD_P_ON
CGCK
COLOR4
COLOR3
COLOR2
COLOR1
PBLK
ID
AVD
AHD
XV1
V_STOP
XSG1
C332 SIGNAL
R338 R339 C301 R333 1u
(9/10) XX 2200 4.7u 5600
L301 10uH
R312 R334 C335
C331 1u
L304 10uH XX 220 0.1u
A_4.6V
REG_GND
R1.1/P1.4
R1.2/P1.4
R1.2/P1.4
R1.2/P1.4
R1.2/P1.4
R1.3/P1.5
R1.1/P1.3
R0.7/P1.3
R0.6/P1.3
R0.3/P1.5
R2.5/P2.8
R2.3/P0
R1.4/P0
R2.7/P0
R0.1/P0
R0.1/P0
R2.8/P0
R340
2.8
1.4
0.2
2.8
2.8
1.5
1.5
2.8
1.5
1.5
1.5
2.7
0.1
1.4
2.8
2.1
2.2
2.2
1.5
1.5
XX
C
0
L306 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163
16 IC_301_C_OUT
R0.9/P1
XX
± 5%
VDDAA9
REXT9
CBU9
DAO9
TESTDAC
VSSA9
PDVSSB
PAVSSB
PAVDDB
PDVDDB
PDVDDC
PAVDDC
PAVSSC
PDVSSC
IN_VSS3
XTALOUT
XTALIN
IN_VDD3
CCDCKL
PLLENB
ADIN0
ADIN1
ADIN2
ADIN3
ADIN4
ADIN5
ADIN6
ADIN7
ADIN8
ADIN9
DVDD5
ADCK
DVSS11
CLP1
OSD_L_ON
OSD_R_ON
OSD_P_ON
CGCK
IO_VDD5
COLOR4
COLOR3
COLOR2
COLOR1
DVSS10
PBLK
ID
AVD
AHD
XV1
VGAT
XSG1
DVSS9
VCK
DVDD4
IC_301_Y_OUT
(8/10) R313
XX
0.3
17
Q305
XX
Q306
R316 2.8 7 IC301 <xzc> REC/PB ZM_RST AD1
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162
C_OUT 2SA207800LS0
1
12k VDDAA8 SENS1 AD1
BUFFER 1 AD2
2.8 FC_RST
(8/10)
2
C311 REXT8 SENS0 AD2
C305 XX
C308 XX
R1.4/P1 230 mVp-p 2.8 AD3
D L305 0.1u
8 IC301 4 REC/PB
3
XX CBU8 TEST AD3
± 5% 0.3 IRIS_COM AD4
4
DAO8 IRIS AD4
R317 470 R1.4/P0 AD5
5
VSSAA8 TBCVD AD5
420 mVp-p H 2.8 AD6
6
VSSAA7 XTECVRST AD6
R0.3/P0 R0/P2.8 AD7
R318
7
DAO7 TESTBS AD7
220 AD8
R1.4/P0.8
C312 H 9 IC301 7 REC
8
0.1u CBU7 VCKO AD8
R319 5600 R1.4/P0 AD9
9
REXT7 DVSS8 AD9
RB302 C323 1u 2.9 EN1 AD10
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
2200 VDDAA7 390 mVp-p EN1 AD10
E 18 AFC_F0_ADJ
2.8
VDDAA6 DIR1B
0 DIR1B V_STOP
V_STOP
(4/10)
R320 12k 1.6
REXT6
q; IC301 qf REC/PB
NTSC: 33.3 msec DIR1A
R2.4/P0 DIR1A PBLK
PBLK
11
C313 0.1u R1.4/P0.4 R2.4/P0 DIR0A ID
CBU6 PAL: 40 msec DIR0A ID (1/10)
R321 270 0.2 470 mVp-p R2.2/P0 DIR0B XSG1
DAO6 DIR0B XSG1
Q302 R0.3/P0 EN0 XV1
VSSAA6 EN0 XV1
HN4A71FK
(TE85R)
qa IC301 qj REC/PB R2.8/P0 AVD
AVD
0.8
0.8
0.8
VSSAA5 IO_VDD4
BUFFER R322 270 0.2 H 2.8 VIHD AHD
DAO5 VIHDO AHD
C339
5
6
7
8
1.5 470 mVp-p 2.6 0.1u CLP1

CBU5 MEMHDI CLP1
F C314 0.1u 1.5
2.8
REXT5 qs IC301 wf REC/PB VIVDO
VIVDO ADCK
ADCK
R323 12k 2.8
VDDAA5 MEMVDI
2.8 H
0.2 4
0.2 3
0.2 2
VDDAA4 460 mVp-p VIFLDO CL

R324 12k 1.6
REXT4 MEMFLDI MCK
C315 0.1u R1.5/P0.6
CBU4 DVSS7
R325 270 0.2 IRIS_COM
REC_RF DAO4 H YMO0 IRIS_COM
EN1
19 PB_C_RF VSSAA4 YMI0
DIR1B
EN1
(4/10)
RF_AGC_OUT VSSAA3
qd IC301 ef REC/PB IC301 YMO1
DIR1A
DIR1B
G DOP DAO3 YMI1 DIR1A

C316 XX 2.8
CBU3
CAMERA/VTR PROCESS,ATF,
LENS CONTROL DVDD3
EN0
EN0 30
R326 XX R1.4/P0.2 330 mVp-p IC301 1.5 DIR0B
REXT3 HG76C012FL YMO2 DIR0B (3/10)
2.8 DIR0A
VDDAA3 YMI2 DIR0A
PANEL_R 2.8 ZM_RST
20 PANEL_G R327 12k R1.6/P0
VDDAA2
H YMO3
FC_RST
ZM_RST
REXT2 YMI3 FC_RST

(10/10) PANEL_B C317 0.1u 0.4
CBU2 DVSS6
R328 270 0.1
DAO2 qf IC301 rl PB YMO4
H 21
EVF_G/BW_Y
PANEL_VD
VSSAA2 YMI4
PANEL_VD VSSAA1 150 mVp-p YMO5
PANEL_HD
(10/10) PANEL_HD DAO1 YMI5
C318 XX 2.8
CBU1 IO_VDD3
R329 XX 0.3 qj IC301 uf REC/PB 2.8
22 PANEL_SYNC
PANEL_SYNC
2.8
REXT1 H YMO6
VDDAA1 YMI6
(10/10) 2.8 2.8 Vp-p
VDDAA0 YMO7
C307 C319 0.1u R0.2/P0 qg IC301 ta PB
I 23 XVC_SCK
XVC_SCK
VC_SO
0.1u
C320 0.1u 0
VRBAD YMI7
VC_SO VRTAD V DVSS5

(6/10) C321 0.1u R0.2/P0 380 mVp-p
VINNAD CMO3
R0.3/P0.8
25
0.01u
C325
VC_SI AD_IN CMI3

VC_SI R0.3/P1.4 NTSC: 33.3 msec
(6/10)
OP_OUT
PAL: 40 msec qk IC301 ug REC/PB CMO2
VSSAA0 CMI2
R0.4/P1.4
C_IN 2.8 Vp-p DVDD2
IC302
26 SYS_V
SYS_V C310 0.01u R0.3/P1.4
ATF_IN qh IC301 yh PB CMO1
1.5 CHARACTER GENERATOR
IC302
(6/10) C306
0.1u VREFOP CMI1 BU3097-04FV-E2
13 14 15 16 17 18 19 20 21 22 23 24
AFC_F0 C322 0.01u R0.3/P1.4
J Y_RF_IN 1.7 Vp-p H CMO0 XOSD_SCK 1.5 2.6 VIHD
1
VIVDO 2.8 SCLK HSYNC
AVDD CMI0 XCS_OSD 2.7 2.8 VIVDO
C304 R2.8/P1.4 CSB VSYNC
2
XTBC_V_RST AMPO NTSC: 14.318 MHz EOR_OUT OSD_SO 2.7 0 COLOR1
LCD_HOLD 390p R308 1k
LCD_HOLD R315 C324 R331 R2.8/P1.4 PAL: 14.187 MHz SDATA VC0
C340 XX
TESTKP XRST_VTR
3
820 0.47u 1M INN 2.8 2.2 COLOR2
XCS_IC_301 C309 4.7u RESETB VC1
XCS_IC_301
2.8 2.1 COLOR3
SCAN_PATH
PANELSYNC
4
MECHA_HD
MECHAFLD
ADCKCONT
TRAPCONT
OUT_VDD1
R303
1200
VDD VC2
MECHAVD
MCKCONT
MECHA_HD R302 R306 R309
RAMTEST
PANELHD
PANELVD
FECKOUT
IN_VDD1
IN_VDD2
IO_VDD2
0.1 OSD_P_ON
IN_VSS1
IN_VSS2
PDVDDA
PAVDDA
ATSMPL
PDVSSA
XSGRST
10k
PAVSSA
470 6800
WRHLD
JOG_VD
FECKIN
DVDD1
CSYNC
DVSS1
DVSS2
DVSS3
DVSS4
SDDIR BLKA
XFEON
5
PDET1
PDET2
PDET3
27
HSWP
JOG_VD
MUTE
OSCO
AVSS
SYSV
XSCK
XRST
OFSC
AFCC
OSCI
SWP
2.1 COLOR4
MCK
JVDI
DOP
BCK
XCS
INP
MECHA_VD
SO
NC VC3
SI
MECHA_VD R330
6
CGCK 1.4 0 OSD_R_ON
(6/10) MECHA_FLD 39k OSCIN BLKB
K MECHA_FLD R307 R311
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
7
ATF_SAMPLE 5600 100 CL302
TEST MONI
KV1870RTL-G
ATF_SAMPLE
R0/P1.4
2.8
R2.8/P0
2.8
2.8
R2.8/P1.3
R2.8/P1.3
2.8
R2.9/P1.4
1.5
R2.9/P1.4
R2.5/P1.4
2.8
2.6
0.2
0
1.4
2.8
1.3
R1.6/P1.3
1.4
2.8
R0/P0.6
2.5
1.4
2.8
R2.8/P0.2
0
2.5
2.6
0.7
2.2
2.7
0
R2.8/P0
2.8
2.8
OSD_L_ON
C302
8
XSG_V_RST VSS BLKC
XSG_V_RST
D301
1u 0
X1/2_SWP C329
1500p
3.5 4.8 TM0 TM3
9
C326
X1/2_SWP 1u
SWP_DIR R2.9 4 6 R3.5
SWP_DIR TM1 TM2
10
/P1.4 /P2.1
TBC_VD 5 2
11
RB301 C327
CL301
Q304 XX C337
10k 3 1 UP04601008S0 C328
0.01u L308 XX
ATF_SAMPLE
12
VCO 3.3uH
PANEL_SYNC
MECHA_FLD
XCS_IC_301
XSG_V_RST
MECHA_HD
MECHA_VD
CK_CONT2
X1/2_SWP
R341
PANEL_HD
PANEL_VD
SWP_DIR
R2.9/P1.5 R314 15k XVC_SCK

L
JOG_VD
R336 1k
4
2
VC_SO
SYS_V
D302
VC_SI
C330 C334 10k C338
C333
0.1u
R332 R310 KV1870RTL XX 0.1u XX

15k 3300 -G 6.3V
3
CK_CONT2
28 CK_CONT2 C303
0.1u
CK_CONT1
(6/10)
XRST_VTR
XRST_VTR
31
R335 1k
C336 (6/10)
XX XCS_OSD
XCS_OSD
M
XOSD_SCK
XOSD_SCK
32
OSD_SO
OSD_SO (6/10)
LCD_HOLD
VIVDO
29 FSC
N (8/10)
05
4-11 4-12 VC-341 (2/10)


1 2 3 4 5 6 7 8 9 10 11 12
VC-341 BOARD (3/10)

A LENS DRIVE (LD BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R:REC MODE
P:PB MODE
R210 2200
HALL_REF
R211
6800
B C209
0.22u RB201
1k
R208
R203 470k
10 HALL_OFFSET
R212 C211 L202
C207 470k 10uH
470p 0.001u
C213
0.9
0.9
4.8
0.9
0.9
R1.4/P0.2 1.2 XX
D202 C203 7 6 5 4 3 2 1
C
C202
0.01u 1SS355TE-17 4700p
C217
4.7u
C218
0.1u 33
OUT2
IN2-
IN2+
Vcc
IN1+
IN1-
OUT1
(4/10)
IC202
IRIS DRIVE
HALL BIAS CONTROL
HALL GAIN CONTROL
HALL AMP
OUT3
OUT4
IN3+
IN4+
GND
IC202
IN3-
IN4-
LM224PT
D 8 9 10 11 12 13 14
R1.9/P2.8
R1.4/P0.2
R1.4/P0.1
0.1
0.1
0.7 R215
R0.9
/P0 10k
HALL_GAIN
470k
Q201 R1 C206
RN1119FV(TH3SONY) /P0 0.1u R214
IRIS DRIVE
0.1 1k
R207
R209
C219 220k
XX R205 R206 0.6
2200 10k
Q203
C204 R204 C205
E CN201 24P
IRIS_DRIVE(+)
R218
XX
4.7u 1M 0.1u R213
330
2SC5658T2LQ/R
HALL GAIN
24 CONTROL
IRIS_HALL(+) 23
D203 C212 C215
IRIS_BIAS(+) 22 0.47u 2200p
XX
IRIS_HALL(-) 21
C214 R216
IRIS_BIAS(-) 20 0.01u 47k
IRIS_DRIVE(-) 19
TEMP 18 RB202
F TEMP 17
22k
ZM_SENSE_VCC 16 A_4.6V
ZM_SENSE_OUT 15 RB203 D_2.8V
47k C216 R217
LENS_DET 14 XX XX 34
FC_SENSE_VCC 13 REG_GND
LENS BLOCK (9/10)
FC_SENSE_OUT 12 REG_GND (MT_GND)
2.8
GND 11 MT_5V
1 4
ZOOM_A 10 IRIS_PWM
2.8 2.8
G ZOOM_B 9 Q202
UP04116008S0
2 5
FC_RST_LED
ZOOM_XB 8 6 3
SENSOR SWITCH
ZOOM_XA
IR_SWITCH
7
R0.8/P0 R0.9/P0
ZM_RST_LED
35
6 LENS_DET
(6/10)
IR_SWITCH 5 XNS_SW
FOCUS_A 4 HALL_AD
FOCUS_B 3 LENS_TEMP_AD
FOCUS_XB 2
H FOCUS_XA 1
• LENS BLOCK is replaced as block,

so that there PRINTED WIRING BOARD and
SCHEMATIC DIAGRAM are omitted.
L201 10uH
R3.1/P0.2
R0/P2.8
/P2.8
R2.4
2.8
0.2
0.2
0.2
5
0
I 24 23 22 21 20 19 18 17 16 15 14 13
C208
0.01u
VDD
OUT1B
PGND
OUT2B
VM23
OUT3B
PGND
OUT4B
EN4
IN4
EN3
IN3
IRIS_COM
ZM_RST
IC201 C210
FC_RST
DIR1B
47u
FOCUS/ZOOM
MOTOR DRIVE 6.3V DIR1A 30
OUT 1A
OUT2A
OUT3A
OUT4A
IC201
PGND
PGND
EN1 (2/10)
VM4
VM!
UPD16877MA-6A5-E2
EN1
EN2
IN1
IN2
EN0
J 1 2 3 4 5 6 7 8 9 10 11 12 DIR0A
DIR0B
5
R0.8/P0.2
0.3
0.3
0.3
5
R1.5/P2.8
0
R0.2/P2.8
05
VC-341 (3/10) 4-13 4-14


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SIGNAL PATH
ws IC481 6 REC
VC-341 BOARD (4/10) wa IC481 9 PB w; IC481 qa PB VIDEO SIGNAL
AUDIO VIDEO/AUDIO/
VIDEO/SERVO
A REC/PB AMP (RF BLOCK,ER BLOCK)
400 mVp-p
CHROMA Y Y/CHROMA SIGNAL
SERVO
SIGNAL SIGNAL
400 mVp-p 150 mVp-p
XX MARK:NO MOUNT NTSC: 33.3 msec
NO MARK:REC/PB MODE PAL: 40 msec REC
NTSC: 33.3 msec
R:REC MODE PAL: 40 msec H
P:PB MODE
PB
L483
B ET481 C493
22uH REC REC/PB PB
XX 0.1u C498 4.7u
C502 XX
Ref.signal
C499 XX
± 0.5%
C501
C504
XX
R493 C496 XX
ET482 0.01u
2700
XX
R495 150k
R4.5/P3.5 3.9
220uH
L481
Q485
C513 UNR31A500LS0
0.47u
C
R0.5/P0.3
R0.1/P1.9
SWITCH 4.7
R0/P2.8
2.3
0.6
0.4
2.2
R2.5/P0.1 0
24 23 22 21 20 19 18 17 16 15 14 13 0
AGC_SLOW
C482
VPSW1 OUT
RAMP V1
REC1 IN
RAMP IR
MT_Q
MTIN
CARDET
PCMOUT/MTSW
MT_F0
PBRFOUT
RP_PB
VCC
C481
33u
M2100/M2101
4.7
0.01u Q484
6.3V RB482
R3.1/P4.4
UNR32A300LS0
MECHANISM 470k
AGC SLOW
0.01u
C483
DECK(1/2) R487
27k
RP_PB_MODE
D
R0.9/P0 2.5
37
36 35 34 33 32 31 30 29 28 27 26 25
10 11 12
REC DUMP1 DOC_DET DOP
R0/P1.3
GND CLPFOUT (6/10)
VIDEO HEAD 4.6 R4.5/P3.5 C509
CN481 11P REC1 OUT AGC TC BOTH_REC
FB481 C488 0.01u 4700p
0.7 R1.5/P2
PB1 IN RF AGCOUT XFE_ON
9
GND 1
4.6 R2.2/P2.4
VCC AMP RP_IR
8
GND 2
C486 0.022u R488 220 2.6
PB DUMP1 IC481 DOP
0
RF_SWP
7
GND 3
C487 0.022u R489 220 2.6 REC/PB AMP 2.2
PB DUMP2 Y/C/ATF IN
6
CH SP1Y 4
SP1 1.1 IC481 0
C484 BIASADJ YLPFOUT/CARDETOUT C508
5
SP1X 5 0.01u CXA3265R-T4 C507
FB482 C489 0.01u 0.7 2.6 0.01u
0.001u
E PB2 IN Y MIX
4
GND 6
4.6 R3.6/P0.8 C514
REC2 OUT REC_Y/MT_CONT
3
CH SP2X 7 0.01u
SP2 4.7
GND VCC3
2
SP2Y 8
BOTH_REC/DV PBPS
R0.9/P0 0
REC DUMP2 AFM IN
1
GND 9
R484 C515
REC_L_CONT
FLYNG FE(Y) 10 DOP
RAMP CONT
VSSW2 OUT
27k 0.01u
ERASE
19
RAMP V2
PCM REC
FE(X) 11 C510 REC_RF
REC2 IN
PCM IN
AFREC
XX
RAMP
PB_C_RF
SWP
GND
(2/10)
C511 RF_AGC_OUT
F M2100: TRV128/TRV228/TRV328/TRV428
M2101: TRV228E/TRV428E 37 38 39 40 41 42 43 44 45 46 47 48
XX
R2.5/P0.1
0.5
R3.1/P4.7
0
1.4
3.3
ql IC481 wj,ef> PB
C505
R494 0.01u
2700 16V
6.1 Vp-p C494 C497
0.1u 0.01u
NTSC: 33.3 msec R481 PB_C_RF

13
PAL: 40 msec 56: TRV128/TRV228 (1/10)
G /TRV328/TRV428
39: TRV228E/TRV428E
1.5M_DEV
R481 C485 R490 L484
XX L482 1.5M_DEV
270 220uH AU_BPF
12uH
4.7 RB483 RB481 AU_BPF
2200
4.7
R491
220
C490
100p
C492
82p
22k A_FADE
A_FADE
38
C503 PB_RF (8/10)
R483 Q482 XX
100 2SA207800LS0 C491 REC_AFM
150p
R4.3/P4.7
R4.3/P4.7 C500
R492 33k
H R4.1/P4.7
R3.6/P4.7
46
R2/P4.7
0.1u
Q481 R3.8/P4.7
5
0
2SA1965-S-TL
Q481-483 Q483 R1.4
2
PB_RF 39
ERASE HEAD OSC 1 /P2.4 C495 REC_2
R482 UP04601008S0 3 (10/10)
560 R1.2/P2.8 100p
I
VC_SO
XVC_SCK
VC_SO
40
IC251 XVC_SCK
(6/10)
EVR
(D/A CONVERTER) DA_STRB
IC251
BH2222FV-E2
DA_STRB 42
(6/10)
15 16 17 18 19 2021 22 23 24 25 26 27 28
4.8 2.5 XVC_SCK HALL_GAIN

RP_4.6V
1
A_4.9V(VCC) CLK
J A_4.6V
4.8
A_4.9V(VDD2) DI
0.5 VC_SO HALL_OFFSET
HALL_GAIN
33
2
FB252 R3.6/P0.8 2.4 HALL_OFFSET

REC_Y/MT_CONT DOC_DET HALL_REF
0uH HALL_REF (3/10)
3
3.3 3.9
REC_L_CONT RF_AGC_CONT
2.2 2.3
FRQ_TUNE
4
4.7
MT_F0
XRF_AGC_OFF AFC_F0_ADJ
RP_IR
2.1 AFC_F0_ADJ FRQ_TUNE 2
5
4.7 2.5 FRQ_TUNE (1/10)

XMP/ME FRQ_TUNE
6
1.1
CFG_DUTY REC_BIAS
36 C252
1.5M_DEV 0.8 0.5 AFC_F0_ADJ
18
97
4.7u
1.5M_DEV MT_Q AFC_F0_ADJ
AU_BPF 2 0.9 HALL_REF
(9/10) (2/10)
8
10
AU_BPF HALL_REF
0.8 HALL_GAIN
K BEEP_EVR HALL_GAIN
11
FB251 A_FADE 0 1.2 HALL_OFFSET

0uH A_FADE HALL_OFFSET
12
2.9 1.4
AU_2.8V D_3.2V(VDD1) SWP(SEL)
0 DA_STRB
13
C251 GND STB(LD)

1u
14
05
REG_GND
4-15 4-16 VC-341 (4/10)


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
VC-341 BOARD (5/10) EP_13.5V

A SERVO (SB BLOCK) REG_GND
D_2.8V C413 C415 C417 C420
XX MARK:NO MOUNT 0.1u 0.1u 0.1u 0.1u
NO MARK:REC/PB MODE 52 REG_GND (MT_GND)

VTR_UNREG
R428
XX
C424 C425 C439
1u 0.1u
R:REC MODE (9/10)
0.1u
P:PB MODE MT_5V
R429 XX
∗:IMPOSSIBLE TO MEASURE THE DRUM_VS C432 C436
R407 XX 0.1u
VOLTAGE AT THE MARKED POINTS. CAP_VS
R411
2.2
0.1u
R408 XX
B MODE_SW_A
MODE_SW_A
MODE_SW_B LM_-
MODE_SW_B
MODE_SW_C LM_+
MODE_SW_C R410 R412
DEW_AD 2.2 DRUM_W
DEW_AD 2.2
DRUM_V
R402 CAP_W DRUM_U

43 330k
CAP_V
(6/10) CAP_U
CAP_ON
wf IC401 yd,yg,yk REC/PB
R401
C 47k
1.4 Vp-p
HI8_MP_SW
HI8_MP_SW
0.5
0.5
0.5
0.2
0.2
0.8
1.5
0.8
1.5
REC_PROOF C404
REC_PROOF FB401 2.8 1 1 0 0.8 NTSC: 180 Hz
M2100 ME_SW
ME_SW
0.1u
PAL: 150 Hz
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
/M2101 C407 DRUM_COM
MECHANISM
CAPON
NC
C_W
C_VS
C_V
C_VS
C_U
L_PGND
L_OUT2
NC
L_VM
L_OUT1
D_W
D_VS
NC
D_V
D_VS
D_U
NC
NC
0.001u RB401
50V 10k
DECK (2/2) C434 C437
44 XCC_DOWN
XCC_DOWN 0.001u 0.001u
D M2100:TRV128
/TRV228
(7/10) CAP_FWD 2.8
wg IC401 td REC/PB
/TRV328 wd IC401 4 REC/PB
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
C_FRC D_PGND
1
/TRV428 0.8
0.001u
C401 TEST COM
C433
M2101:TRV228E 0.1u LM_- MR_VCC 2.8 0.8
2.8 Vp-p
/TRV428E CN401 2P VMR 2.8 Vp-p WIN
3
CAP_FG 1.4 0.8
M903
M CFGOUT VIN
4
LOADING LM(-) 1 NTSC: 180 Hz
LM_+ 0.8
MOTOR C_PGND PAL: 150 Hz
NTSC: 820 Hz UIN
5
LM(+) 2 R406
0.8 C431
C402 C403 XX GND PAL: 1148 Hz DFILTER
6
XX XX 0.047u
FG1 1.4 2.1
CN402 10P CFGIN+ DFC C435
7
DRUM_PG_SENS FG2 R0/P1.4 1.4 2.2u DRUM_FG
E CFGIN- DFGOUT
8
PG 1
FG_PG_COM 0.4 1.3 R424 10k DRUM_FG_SENS
C410 CAGC DFGIN
9
FG-PG_COM 2 1u
FP/PG DRUM_FG_SENS UHE+ 0.6 1.3 R430 XX R416 C442 FG_PG_COM
IC401
20 19 18 17 16 15 14 13 12 11 10
FG 3 U+ VREF XX 470p
DRUM_COM UHE- 0.6 0.1 DRUM_PG
COM 4 U- PGOUT
VHE+ 0.4 DRUM/CAPSTAN/LOADING 1.3 DRUM_PG_SENS
W 5 V+ MOTOR DRIVE PGIN
DRUM_W VHE- 0.4 IC401 0.9
V- PGC R431
W 6 TB6550FG(O,EB)
C429 1u 0
WHE+ 0.2 13.6
V 7 W+ VG
M901 DRUM_V WHE- 0.2 0.1 C430 0.022u C441 R425
W- ISNF C443
DRUM V 8
F MOTOR 2.8
VCC1
wh IC401 t; REC/PB DBOUT
0.6
1u 0.1u
R418
XX
0.01u
U 9 XX
C408
16V
U 10
DRUM_U
HE_VCC
0.7
1.3
VH
2.8 Vp-p
DBIN
0.6
DRUM_ERROR 46
0.3
TOPIN CBLOUT CAP_ERROR (9/10)
TAPE_TOP 2.8 0.3 R423
TOPOUT CBOUT
XX
TAPE_TOP_C 1.3
ENDIN
NTSC: 33.3 msec CBIN
0.3
CN403 22P TAPE_END_C PAL: 40 msec C440
XX
VH- 1
WHE- C409 CL
12
ENDOUT
LIMOUT
XRESET
RLDO1
RLDO2
HW2 2 0.047u
TRV228E/TRV428E
DGND
RLM1
RLM2
(1/10)
RLO1
RLO2
RLP1
RLP2
VCC2
DEC1
DEC2
MCK
WHE+ 10V
CSR
SCK
XCS
HW1 3 TAPE_END
G
SI
VHE-
0.022u
HV2 4
C428
VHE+ 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
HV1 5
2.8 ∗ ∗
1.9
1.9
1.9
1.9
8.3
0.2
0 0
2.8
1.5
2.5
2.8
0.5
UHE- 0.5
HU2 6
UHE+ S_REEL_+
HU1 7
HE_VCC C411
VH+ 8 S_REEL_- 0.01u UNLOAD
MECHANISM
CAP_V
CAP_V
9
10
CAP_V
SREEL_FG
T_REEL_+
LOAD
XCS_IC-401
47
BLOCK C412 DRUM_PWM
(6/10)
CAP_W 11
H (CAPSTAN MOTOR)
(PAGE 4-33) CAP_W 12
CAP_W T_REEL_- 0.01u
TRV228E/TRV428E CAP_PWM
TREEL_FG R413 R427
CAP_U 13 C427 R426 C445
CAP_U C446 C426 4700p 15k 0.01u
CAP_U 14 XX 0.01u
REG_GND 15
FG2 R414 C444
FG2 16
MR_VCC
0.01u
VC_SO 48
FG VCC 17
FG1 XVC_SCK (6/10)
FG1 18 C414 C423
C416
C418
C419
C421
C422
XX
XX
XX
XX
XX
XX
MODE_SW_C 0.1u R413,R427
I M-SW(C) 19
MODE_SW_B wj IC401 rf REC/PB wk IC401 ra REC/PB 0 :TRV128/TRV228/TRV328/TRV428
M-SW(B) 20 10k :TRV228E/TRV428E
MODE_SW_A
M-SW(A) 21
DEW_AD 80 mVp-p 70 mVp-p R414
DEW 22 15k :TRV128/TRV228/TRV328/TRV428
DRUM_FG 47k :TRV228E/TRV428E
DRUM_FG
DRUM_PG
DRUM_PG 13 sec 13 sec
TAPE_TOP
TAPE_TOP
TAPE_END
TAPE_END XRST_VTR
50
SREEL_FG
J CN404 15P
XCC_DOWN TREEL_FG
SREEL_FG
45 (6/10)
C_LOCK_SW 15 TREEL_FG
HI8_MP_SW CAP_FWD (6/10)
HI8_MP 14 CAP_FWD
REC_PROOF 13
REC_PROOF CAP_FG
CAP_FG LM_LIM_DET
51
ME_SW CAP_ON
ME/MP 12
R404
CAP_ON (6/10)
270
HALL_COM 11 XREEL_HALL_ON
T_REEL_-
TAPE_LED_ON
SIGNAL PATH
T_REEL(-) 10
T_REEL_+
T_REEL(+) 9
MECHANISM R403 470 REC REC/PB PB
K BLOCK SENSOR_VCC 8
S_REEL_+
R409
82
91
(SENSOR) S_REEL(+) 7 CAP_FG
(PAGE 4-33) S_REEL_-
(10/10) Drum speed servo
S_REEL(-) 6
REG_GND 5
TAPE_LED(A) 4
Drum phase servo
TAPE_LED(K) 3
TAPE_END_C 4.4 R405 Drum servo(speed and phase)
TEPE_END(C) 2 0
TAPE_TOP_C 0
TAPE_TOP(C) 1 Q401
Capstan speed servo
L UNR32A600LS0
LED DRIVE
C405
XX
C406
0.1u
Capstan servo(speed and phase)
05
VC-341 (5/10) 4-17 4-18


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
NO MARK:REC/PB MODE
VC-341 BOARD (6/10) R:REC MODE
P:PB MODE
A CAMERA/MECHA CONTROL ∗:IMPOSSIBLE TO MEASURE THE
VOLTAGE AT THE MARKED POINTS.
XX MARK:NO MOUNT
XNS_SW AA_2.8V
XNS_SW
ZM_RST_LED
ZM_RST_LED D_2.8V
FC_RST_LED FB601 0uH 66
35 FC_RST_LED
IRIS_PWM
D_1.5V
REG_GND (9/10)
IRIS_PWM
B (3/10)
LENS_TEMP_AD
LENS_TEMP_AD
HALL_AD
HALL_AD
LENS_DET
XREEL_HALL_ON
HI8_MP_SW
REC_PROOF
ME_SW
MODE_SW_C
MODE_SW_B
MODE_SW_A
OSD_V
VIVDO
TBC_VD
MECHA_VD
DOP
BEEP
TAPE_LED_ON
DRUM_PG
DRUM_FG
IR_ON
CAP_FG
XS_JACK_IN
AV_JACK_IN
SYS_V
XTBC_V_RST
REC_CRRT1
REC_CRRT0
XCS_MC_FLASH
MECHA_HD
XFE_ON
RP_PB_MODE
BOTH_REC
CAP_FWD
CAP_ON
LCD_HOLD
LENS_DET
0.1u
EVF_DD_ON
EVF_DD_ON RB611
C624
AV_JACK_IN 100k
53 AV_JACK_IN
XS_JACK_IN CL602 CL618
RB613
R636 100k
4700
XS_JACK_IN
CL604
CL605
CL606
(10/10) CUSTOM_LED_ON C610 RB605
CUSTOM_LED_ON 1k
C607 0.1u
DCOUT_JACK_IN XCS_EEP 2.8 2.8
0.1u
C DCOUT_JACK_IN
8
S VCC
EEP_SI 2.8 2.8
7
Q HOLD
VST_C_RESET 2.8 2.8 EEP_SCK
VST_C_RESET
6
W C
CL614
54 PITCH_AD 0 EEP_SO
R2.8/P0.2
R1.8/P2.8
PITCH_AD
5
VSS D
R0/P2.8
R0/P2.8
R0/P2.8
R0.3/P0
YAW_AD
(10/10) YAW_AD
1.4
2.8
2.6
2.8
2.8
0.1
1.3
1.5
1.4
2.8
2.8
2.5
1.4
2.8
2.8
2.8
2.8
2.8 0 0 0 0 0 0 0 0 0 0 0 0
216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 IC602
55 BEEP
BEEP
C602 EEPROM
VDD
XREEL_HALL_ON
HI8_MP_SW
REC_PROOF
ME_SW
MODE_SW_C
MODE_SW_B
MODE_SW_A
IC_701_V
EXI_TEST
MEM_VD
TBC_VD
MECHA_VD
DOP
MELODY_CARR
TAPE_LED_ON
VSS
SDC_ON
DRUM_PG
DRUM_FG
IR_ON
SREEL_FG
TREEL_FG
VDD
CAP_FG
HP_JACK_IN
XS_JACK_IN
V_JACK_IN
MIC_IN
XMIC_MONO
VSS
SYS_V
TBC_V_RESET
INTVD
REC_CRRT1
REC_CRRT0
XCS_MC_FLASH
MECHA_HD
XFE_ON
RP_PB_MODE
BOTHREC
VDD
CAP_FWD
CAP_ON
LCD_HOLD
IC602
D (8/10)
10p
HN58X2532TI
C619
0.01u
UNLOAD
20MHz
UNLOAD
(D_1.9V)
(D_2.8V)
X601
R606
(D_2.8V)
LOAD XX 1.2 R2.8/P0 CAM_DD_ON
LOAD 1 X1 CAM_DD_ON 162
47 XCS_IC_401
XCS_IC_401
2 VSS 161
C623
0.1u 67
DRUM_PWM ∗ 1.5 LCD_HOLD
(5/10) DRUM_PWM 3 X0 (D_1.9V) VDD 160
CAP_PWM C603 10p 1.5 RF_SWP (10/10)
CAP_PWM 4 XIN RF_SWP 159
1.4 SWP_DIR
R605 XX
5 MD2 wl IC601 1 (X601) REC/PB e; IC601 <zb,> REC/PB SWP_DIR 158
1.6 X1/2_SWP
MECHA_FLD
MECHA_FLD
E 51 LM_LIM_DET
LM_LIM_DET
R601
6 MD1
2.9 Vp-p
X1/2_SWP(HSWP) 157
R0/P0.6 ATF_SAMPLE
LCD_HOLD
LCD_HOLD
100 7 MD0 1.9 Vp-p ATF_SAMPLE 156 AFC_F0
(5/10) XSYS_RST 2.8 0 JOG_VD AFC_F0
8 XINIT JOG_VD 155 VIVDO
R602 10k 2.8 2.8 XSG_V_RST VIVDO
TREEL_FG 9 XRST 20 MHz NTSC: 33.3 msec XSG_V_RST 154 XTBC_V_RST
TREEL_FG DOP 0 XTBC_V_RST
SREEL_FG 10 DOP
PAL: 40 msec 153 XCS_IC301
SREEL_FG AGC_SLOW 0 XCS_IC301
TAPE_TOP
TAPE_TOP
C601
11 AGC_SLOW 152
2.8
C622
0.1u MECHA_HD
MECHA_HD
27
TAPE_END 0.01u 12 (D_2.8V) VDD 151 JOG_VD
TAPE_END R0/P2.6 JOG_VD (2/10)
16V C615
DRUM_FG 13 C2 150 0.1u MECHA_VD
F 45
DRUM_FG
DRUM_PG
DRUM_PG
2.8
0.2
14 VDD (D_2.8V) VSS 149 ATF_SAMPLE
MECHA_VD
ATF_SAMPLE
LM_LIM_DET C605 0.1u
XREEL_HALL_ON 15 LM_LIM_DET TUL 148 XSG_V_RST
(5/10) XREEL_HALL_ON XCS_IC_401 2.8 2.8 XSG_V_RST
TAPE_LED_ON 16 XCS_IC_401 (D_2.8V) AVDD_U 147 X1/2_SWP
TAPE_LED_ON UNLOAD 0 2.8 X1/2_SWP
CAP_FWD 17 LM- (D_2.8V) AVRH_U 146 SWP_DIR
CAP_FWD LOAD 0 SWP_DIR
CAP_FG 18 LM+ AVSS_U 145 TBC_VD
CAP_FG TAPE_TOP 2.8 TBC_VD
CAP_ON 19 TAPE_TOP ANIN1 144
CAP_ON TAPE_END 2.8
20 TAPE_END ANIN0 143 XCS_OSD
MODE_SW_A
MODE_SW_A 21 VSS 142 XOSD_SCK
XCS_OSD
XOSD_SCK
32
R005
G MODE_SW_B
MODE_SW_B 22 141 R005 100k :TRV128/TRV228
22k :TRV228E
OSD_SO
OSD_SO
(2/10)
MODE_SW_C 23 140 56k :TRV428E
43 MODE_SW_C
ME_SW 24 LM_LIM_CONT DRUM_START 139
XX :TRV328/TRV428
(5/10)
ME_SW
HI8_MP_SW 25 F_RATE IC601 DRUM_ON 138
R006
47k
R006
:TRV128/TRV228
VC_SI
VC_SI
9 25 94
HI8_MP_SW EVF_DD_ON 0 100k :TRV228E
REC_PROOF 26 EVF_DD_ON CAMERA/MECHA CONTROL XDRUM_BRAKE 137 10k :TRV328/TRV428 (1/10) (2/10) (10/10)
REC_PROOF IC601 68k :TRV428E
DEW_AD 27 XCS_EVF MB91194APFF-G-153-BNDE1 SYSTEM_AD 136 XCS_IO
DEW_AD 0
28 XEVF_TALLY GRNERAL_AD 135
1.4 MECHA_FLD VC_SO
56 (10/10) V_LIGHT_PWM
V_LIGHT_PWM 29 V_OUT_ON MECHA_FLD 134
1.5 ZOOM_VR_AD XVC_SCK
VC_SO
5 23 40 48 81 95
H 30 ZOOM_SW_AD 133
2.8 R616 TRV328/TRV428/TRV428E
XVC_SCK
(1/10) (2/10) (4/10) (5/10) (8/10) (10/10)
31 XCS_IO 132 1k RB610
ZOOM_VR_AD 32 (XUSB_EN) 131 C612 4700
57 (10/10) ZOOM_VR_AD
33 YAW_AD 130
1.3 RB608 1M XX YAW_AD
1.2 PITCH_AD
C604
0.1u
0
34 VSS PITCH_AD 129
R1.4/P0.3 HALL_AD XCS_IC301
7
OSD_V 35 C1 IRIS_HALL_AD 128
58 (7/10) OSD_V 1.5
36 VDD (D_1.5V) LENS_TEMP_AD 127
1.9 R619 1k LENS_TEMP_AD (1/10)
C616 0.1u C625
C606 XX
37 AVSS_1 126
0.1u
I 38 (D_2.8V) AVRH_1 125
2.8
2.8
C617 C618
C617,C618
4 89 CAM_DD_ON
CAM_DD_ON C620
0.1u
39 (D_2.8V) AVDD1 124
2.8 C614
100k (Note):TRV128/TRV228/TRV228E
0.01u :TRV328/TRV428/TRV428E
40 (D_2.8V) AVDD_0 123 1u
(1/10) (9/10) 2.8 Note:Resistors are mounted to
41 (D_2.8V) AVRH_0 122 the location where C617
and C618 are printed.
42 AVSS_0 121 (TRV128/TRV228/TRV228E only)
∗
DCOUT_ON 43 SREEL_FG_AD 120
59 (9/10) DCOUT_ON LENS_DET 0
44 LENS_DETE TREEL_FG_AD 119
∗ SREEL_FG
0 TREEL_FG
45 DEW_DET 118
DA_STRB 0 R2.9/P1.4 DEW_AD
J 60 (10/10) XCS_LCD
XCS_LCD 46 DA_STRB AFC_F0_IN 117
AFC_F0
47 CK_NISHIKI 116 CL616
0 DCOUT_ON
48 DCOUT_ON 115
ZM_RST_LED 2.8
49 ZM_RST_LED HITEST 114 CL613
FC_RST_LED 2.8
8 31 50 XRST_VTR
XRST_VTR 50 FC_RST_LED USB_DET 113 IR_ON
IR_ON
68
51 XUSB_ON 112
(10/10)
ATF_DEBUG_IN/EVF_VG_AD
EEP_SCK (MC_FLASH_SCK)
(1/10) (2/10) (5/10) CUSTOM_LED_ON 0 0 DCOUT_JACK_IN

EEP_SO (MC_FLASH_SO)
52 EASY_MODE_LED DCOUT_JACK_IN 111

EEP_SI (MC_FLASH_SI)
2.8 2.8 XNS_SW

53 VDD (D_2.8V) XNS_ON_SW 110
ATF_DEBUG_PWM1
ATF_DEBUG_PWM2
VST_C_RESET
(D_1.9V)
(D_2.8V)
0 2.8 XCS_LCD
K
APOLLO_PWCTRL
26 75 SYS_V 54 VST_C_CHARGE XCS_LCD 109

IRIS_COM_PWM
ATF_DEBUG_IN2
SYS_V
V_LIGHT_PWM
MELODY_ENV
IC_701_XSCK
XCS_AFM_ST
DRUM_PWM
XCS_APOLLO
GCAM_XSCK
XCS_IC_701
XCS_IC_301
XCS_GCAM
IC_701_SO
(2/10) (7/10)
IRIS_PWM
CK_CONT1
CK_CONT2
CAP_PWM
xRST_VTR
IC_701_SI
GCAM_SO
OSD_SCK
XCS_OSD
xCS_AFM
XCS_EEP
OSD_SO
SCK_VC
VC_SO
VC_SI
OSC1
OSC0
IC_701_SCK
VDD
VDD
VSS
VSS
VSS
61
IC_701_SCK
XCS_IC_701
XCS_IC_701 XCS_AU
RF_SWP
XCS_AU
69
IC_701_SI 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 (8/10)
(7/10) IC_701_SI
IC_701_SO 2.8
2.9
2.8
2.5
2.8
2.8 0
2.8
2.8
2.5
2.2
0.7
2.6
1.5
1.5
2.7
2.7
2.8
2.8
0
2.8
0.9
0.5
0 0
R2.8/P0
R0/P2.8
2.8
IC_701_SO
CL610
CL617
CL612
CL611
L
XCS_IO
XCS_IO
70
62 XSYS_RST
XSYS_RST
(8/10)
(7/10) C611 C609

RB602 0.1u 0.1u
XFE_ON
100k
RB606
XFE_ON
10k
RF_SWP CL609
93 REC_CRRT0
REC_CRRT0
REC_CRRT1
RB603 BOTH_REC
RF_SWP
BOTH_REC 37
100k
(10/10) REC_CRRT1 DOP
SIGNAL PATH DOP (4/10)
RB612 AGC_SLOW
47k AGC_SLOW
M EEP_SI
RB601
100k REC REC/PB PB
RP_PB_MODE
RP_PB_MODE
63 EEP_SI
EEP_SO
(10/10)
EEP_SO
EEP_SCK Drum speed servo
DA_STRB
DA_STRB
42
EEP_SCK
(4/10)
Drum phase servo

V_LIGHT_PWM
CS_CH
64 CS_CH
DRUM_PWM
10
IC_701_SCK
XCS_IC_701
XCS_IC_301
IC_701_SO
XOSD_SCK
MD2 ( REG_GND
XRST_VTR
IRIS_PWM
CK_CONT1
CK_CONT2
)
CAP_PWM
CH_SCK
IC_701_SI
XCS_OSD
XVC_SCK
EEP_SCK
XCS_EEP
XCS_MC_FLASH Drum servo(speed and phase) CH_SCK

OSD_SO
XCS_AU
CH_SCK
EEP_SO
XCS_MC_FLASH
EEP_SI
CH_SO
VC_SO
CS_CH
(10/10) CH_SO
VC_SI
(1/10)
N CH_SO
Capstan speed servo

65 XCS_EEP
XCS_EEP
CK_CONT1
(10/10) SWP_DIR
SWP_DIR Capstan servo(speed and phase) CK_CONT2
CK_CONT1
3 28
05 CK_CONT2
(1/10) (2/10)
4-19 4-20 VC-341 (6/10)


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
VC-341 BOARD (7/10) VOUT

A HI CONTROL REG_GND
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
XCS_DD
XSYS_RST
SIRCS_PWM
BATT_SIG
SIRCS_SIG
R:REC MODE
P:PB MODE
74
(9/10)
B
R715
R708 EVER_3.0V
1k
1M BATT_IN
± 0.5% Q701
BATT_IN
HN1L02FU(TE85R) XRESET
XRESET
BATTERY CHARGE VTR_DD_ON
R710 DETECTOR
470k 3 VTR_DD_ON
± 0.5% XCS_DD
XCS_DD
1 4 HI_EVER_SO
HI_EVER_SO
0.3 2.7 HI_EVER_SCK
HI_EVER_SCK
R707 2 5
1SS355TE-17
100k
± 0.5% C713 6 3
0.01u 0 0
C 16V
XRESET 85
(10/10)
R711 RB708
100k
C708
± 0.5%
47k
XSYS_RST 62 92
D701
22u XSYS_RST
6.3V
(6/10) (10/10)
C712 C714
18p 18p
SYS_V
SYS_V 75
32.768kHz
D
X702
(6/10)
R713
0
KEY_AD0
R709
XCC_DOWN
XCC_DOWN
44
R2.8/P1.5
KEY_AD1 2.8 10M
(5/10)
KEY_AD2
2.8
2.8
2.7
2.5
1.3
2.8
0.3
0.3
0.3
3
1
3
KEY_AD0 KEY_AD3 RB704
KEY_AD0
1k 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 BATT_UNREG
KEY_AD1
KEY_AD1
KEY_AD2 VTR_UNREG
KEY_AD1
KEY_AD0
HOT_SHOEID2
HOT_SHOEID1
VTR_DD_SENSE
ACV_SENSE
BATT_SENSE
VCC
X0A(IN)
X1A(OUT)
GND
XCS_DD
TP_SEL2
XSYS_RST
XLANC_ON
SIRCS_OUT
XDS_RST
IB_SI
IB_SO
XSIRCS_IN
KEY_AD2
E 71 KEY_AD3 D_2.8V
C707
C705
C702
C703
XX
XX
XX
XX
KEY_AD3
XBATT_INFO_SW
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
XBATT_INFO_SW
(10/10) DIAL_A
DIAL_A C711 0.3 LANC_OUT
62 61
DIAL_B R712 0.1u KEY_AD2 LANC_OUT

DIAL_B 10k 2.8
3
VCC
es IC701 ta (X702) REC/PB
LANC_IN
0.3
3
LANC_IN
76
INIT_CHARGE_ON
AVREF INIT_CHARGE (9/10)
69 68 67 66 65 64 63
3 0 FAST_CHARGE
GND FAST_CHARGE
RB701 3.0 Vp-p BATT_SIG
470k KEY_AD3 LCD_COM/XDATA BATT_SIG
F 2.8
KEY_AD4 VTR_DD_ON
3 VTR_DD_ON BATT/XEXT
BATT/XEXT
KEY_AD5 32.768 kHz FAST_CHARGE
XEJECT_SW KEY_AD5 TP_SEL1 FAST_CHARGE
XEJECT_SW KEY_AD7 2.8 2.8 INIT_CHARGE_ON
XPOWER_SW KEY_AD6 XHI_DS_HELP INIT_CHARGE_ON
XPOWER_SW 2.4 SYS_V
XMODE_SW KEY_AD7 (XS/S_SW) SYS_V
C701 C704
XMODE_SW
KEY_AD7 RB703 XX XX
2.7
TP_X IC701 BATT_IN
3 R717 470 BATT_IN
70
KEY_AD7 1k C715 R718 100k

72 KEY_AD5 TP_Y HI CONTROL TEST 0.1u X701
71
KEY_AD5 IC701 1.3 10MHz

XCHARGE_LED R704 47k XLANC_JACK_IN X_TAL
(10/10) MB89097PFV-G-170-BND-ERE1
XCHARGE_LED XRESET 1.2
74 72
XVTR_LED RST_X X_TAL

XVTR_LED BATT/XEXT C709 0.01u 3
G XCAM_LED BATT/EXT TEST R716
76 75 73
XCAM_LED 0 1M XCS_IC_701
SHOE_ON IC_701_XCS0
C710
4700p 2.5 IC_701_SCK
STROBO_PLUNGER IC_701_SCK0
R705 2.8 IC_701_SO
NEW_DD IC_701_SO
80 79 78 77
XX
3 2.8 IC_701_SI LANC_IN
R706 LANC_IN
CHRGELED/LCD_LED_ON
DD_COM/XPRD IC_701_SI
DIAL_A XX R3/P2.6
DIAL_A XCS_LCD_DRIVER
2.8 LANC_OUT
LANC_OUT
77
XLANC_POWER_ON
DIAL_B R2.9/P2.5 HI_EVER_SCK XLANC_PWR_ON

(10/10)
XPHOTO_FREEZE
DIAL_B HI_EVER_SCK XLANC_PWR_ON

STRB_LED_ON
XF_TALLY_LED 0 3
XPOWER_SW
XBATT_VIEW
XF_TALLY_LED HI_EVER_SO
XMODE_SW
XEJECT_SW
SYS_V_OUT
BT_LED_ON
XCC_DOWN
73
XMEM_ON
H SIRCS_PWM
MEM_LED
PWR_LED
CAM_LED
SIRCS_PWM
F_TALLY
(10/10) SIRCS_SIG
SIRCS_SIG ea IC701 wk (X701) REC/PB
GND
VCC
N.C
IC_701_SCK
IC_701_SCK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2.1 Vp-p IC_701_SO
IC_701_SO
61
0
2.9
2.9
2.9
0
3
R1.4/P0.1
R0/P2.5
R2.3/P2
R0/P2.3
2.6
2.9
IC_701_SI
IC_701_SI
10 MHz XCS_IC_701 (6/10)
XCS_IC_701
I
RB705
1k
XPOWER_SW
OSD_V
OSD_V 58
XMODE_SW R714
(6/10)
4700
XBATT_INFO_SW
XLANC_PWR_ON
XF_TALLY_LED
XCHARGE_LED
XEJECT_SW
HI_EVER_SO
XCAM_LED
XCC_DOWN
XVTR_LED
RB706
OSD_V
J 1k
05
VC-341 (7/10) 4-21 4-22


1 2 3 4 5 6 7 8 9 10 11 12 13
VC-341 BOARD (8/10)

A AUDIO,VIDEO
XX MARK:NO MOUNT
SIGNAL PATH
NO MARK:REC/PB MODE
R:REC MODE VIDEO SIGNAL
P:PB MODE AUDIO
CHROMA Y Y/CHROMA SIGNAL
A_4.6V
B AU_2.8V REC
78 AU_4.6V
R811 47k
C828
0.01u
C831
4700p
C833
0.22u
R814 C825
C830
C826
C834
1u
1u
1u
22u C836 C839
(9/10) MT_5V XX
6.3V 0.22u 0.47u PB
REG_GND
C819 C817 C823
0.22u 10u 1u
16V C822
0.22u
55 R817
(6/10)
BEEP
C811
4.7u
C813
XX
C815
22u
470k
REC_AFM
80
R3.4/P0.1
NR_VRF
6.3V
(10/10)
C
CONTROL CN008 2P
2.4
2.4
2.4
2.4
2.9
1.4
1.4
1.4
1.4
0.7
0.7
1.1
0 R1.1/P2
KEY SP(+) 1
BLOCK
SP(-) 2
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
FSC
29
(CF-5100)
SP_VCC
SP_VREF
BEEP_IN
SP_IN
SP_OUT
DAC
VCC(AFM)
NR_EMP
LS_WAIT1
LS_WAIT2
NR_HOLD
NR_RECOVER
GND(NR)
PLL_LOOP_F
RECAFM_OUT/BPF_MONI
(SEE PAGE 4-35) C809
(2/10)
C803
XX XX
69
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
C804
XX RF_SWP
2.4 C843 XCS_AU
R819
49
SP+ GND(BPF) XCS_AU

D SP_GND PB_RF_IN
R0.1/P0
0.01u 820 (6/10)
50
2.5 R2.3/P2.1 C844

C801 SP- MUTE_TC 68p
C840 0.001u
51
22u 4.8
6.3V VCCH GND(IIL)
2.4 0.1 XVC_SCK CL804
C808
81
52
VREFH FSC XVC_SCK

22u
6.3V 1.4 VC_SO CL803
GND SWP VC_SO
53
0 2.8 XCS_AU (6/10)

LINE MUTE CS_IN
54
C805 10u 16V 2.4 2.5 XVC_SCK

AUDIO_L_I/O
C806 2.9
LINE OUT IC801 CK_IN
R0.7/P0.4 VC_SO
55
0.01u VCC(MIC AMP) AUDIO/VIDEO PROCESS SI_IN

E R803 C802 R806 1.4
MIC IN
IC801
VCCHDR
4.8
70
56
XX 10u 16V 2200 AN12985A-VB

R2.3/P0 R0.3/P0
MIC REG YSAG CL805 XCS_IO
57
1.2 0.3
(6/10)
79 C810 1u 1.3
VREG YOUT
58
IREF GNDDR
(10/10) R807 47k ± 0.5% 2
GND(MIC AMP) VOUT
59
C807 10u 16V 1.4 2

VREF VSAG REC_AFM
60
1.4 0.4
MIC_PRI_AMP_OUT COUT PB_RF
38
MIC_AMP_OUT
61
NR_MONITOR
F 1.5M_DEV
MIC_FL_OUT
PB_DC_CUT
EE_OFFSET
MIC_FL_IN
C841 (4/10)
FADE CTL
DEV_ADJ
GND(FM)
A_FADE
BPF_ADJ
62
VCCHYC
10u
LINE_IN
GNDYC
INT_MIC
AGCTC
16V
AU_BPF
YIN
CIN
63
C842
64
0.01u
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
R1.4/P0
R1.4/P0
0
R1.4/P0.1
1.4
1.4
1.4 0 0 2 2
2.1
4.8
L801
17 C_OUT
CL801
C812
10uH
(2/10) 0.1u R818

0
G C837 C821
0.47u
L802 RB801
68
0.01u XX C845 22u 6.3V S_Y_I/O
R802 C846 100u 4V S_C_I/O
83
14 IC_801_Y_OUT
XX
C847 0.01u VIDEO_I/O (10/10)
R815
150k
CL802 R810 R812

(1/10) 10k 4700 C848 100u 4V
C832
0.01u
C838
C816 XX C849 22u 6.3V
0.01u 6.3V
C814
C818
C824
0.47u
C820
C835
C850
C827
6.3V
C829
3.3u
50V
0.1u
XX
XX
1u
0.1u 1u
H 16 IC_301_Y_OUT
(2/10) IC_301_C_OUT
05 ed IC801 wa REC/PB (S JACK IN) ef IC801 ql REC/PB (AV JACK IN) eg IC801 qj REC/PB (S JACK IN)
1.8 Vp-p 2.0 Vp-p 990 mVp-p
H H H
4-23 4-24 VC-341 (8/10)


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
VC-341 BOARD (9/10) VTR_UNREG

D_2.8V
A DC CONTROL (DD BLOCK) BATT_UNREG

76
BATT_SIG
XX MARK:NO MOUNT BATT/XEXT
NO MARK:REC/PB MODE (7/10)
FAST_CHARGE
R:REC MODE
P:PB MODE INIT_CHARGE_ON
DRUM_VS
MT_5V
BT901 F001
B DC IN
(1.4A/32V)
CAP_VS
VTR_UNREG 52
R064 R067 REG_GND
(5/10)
10 1200 REG_GND (MT-GND)
C052 C051 8
CN053 6P XX XX 4 F003 D_2.8V
(1.4A/32V)
BATT_GND 1
8 3 1
8.3
EP_13.5V
BATT/XEXT 2 IN1
2 8.3 REG_GND
R051 R053
ACV_GND 3 100k 7 8 7.6 1.5
1k D_1.5V
F004
ACV_UNREG 4 6 8.1
Q053 (1.4A/32V)
2 1
L055
22uH
L058
4.7uH
C094
10u A_2.8V 15
C BATT_SIG 5
8 5
8.3 2SB798-T1
-DLDK 6.9 Q056
XN0NE9200LS0
6.3V
D_2.8V (2/10)
S BATT_UNREG 6
Q052 3 SWITCHING A_4.6V
UPA1858GR-9JG R068 8.3 4 5 L059 C095
-E2-A 6800 F002 4.7uH 4.7u
SWITCH (1.4A/32V) C077 C085
XX 4.7u L060 4.7uH
BATTERY
TERMINAL IN2 L061 4.7uH
D_2.8V
3 4
0
C055
0.022u
R062
0.1 15.7 L062 4.7uH
D_1.5V
66
D051 3 L052 FB051 0uH
D052 1M 22uH (6/10)
DF3A6.8FV 0 REG_GND
D (TH3SONY)
MA4ZD03001S0
Q054
2 1
Q057
4.7u
2.5 C096 C100
C098 C102
C073 10u
2 1 Q051 UNR32A300LS0 XN0NE9200LS0 33u
C074 XX
3 4.7u 1u 4.7u
2SC584600LS0 SWITCHING 4V
5
C071
SWITCH Q053,054 8.3 4
CHARGE CONTROL L063 22uH
C078 C086
4.7u 4.7u L064 4.7uH
IN3 L065 22uH
L066 47uH
IN7
2.9
46 DRUM_ERROR
R076 L056
RP_4.6V
E (5/10)
CAP_ERROR
0 2 1
Q058
22uH C097
22u
6.3V
C099
2.2u
C101
XX
6.3V
C103
4.7u
C104
22u
6.3V
AU_2.8V
A_4.6V
36
5.2
R070 XN0NE9200LS0 (4/10)
R077 3
84 BL_CONT
33k 120k
8.3 4 5
SWITCHING
C087
8.3 5
R097
REG_GND
R078 4.7u R086 C105

(10/10) R066 47k Q063 Q063,065,069 22k 4.7u
C060 22k
27k 0.1u 2SB798-T1-DLDK 5V REG ± 0.5%
IN4 7.7 MT_5V
R074
12k 4.8 AU_4.6V
± 0.5%
L057
Q065
2SA207800LS0 R098
6800
AU_2.8V 78
2 33uH 7.1
1 A_4.6V (8/10)
5
F 3.4
3
Q059
XN0NE9200LS0
6 3
REG_GND
SWITCHING 1.2
8200
5
R065 4700
8.3 4 5
10k
2
1k
R073 1k
R075 1k
1.3
C079 C088 Q069 A_4.6V
1 4
4.7u 4.7u UP04501008S0
R072
R071
D_2.8V
R069
0.7 R099
C093 R092
XX 4700
10k
± 0.5% MT_5V 34
0.001u
0.015u
0.033u
0.022u
CAP_VS (3/10)
2200p
C064
REG_GND
C067
C070
C072
C062
1 REG_GND (MT-GND)
C057 L053
6800p
22uH
G 7.2
2 1
Q060
D_2.8V
1.4
1.4
1.2
0.8
1.2
0.3
0.3
0.6
0.6
0.6
0.6
0.8
1.2
2.5
XN0NE9200LS0 MT_5V
1
1.4 3 -15.4 R-7.7/P0.5 R-7.7/P0.5
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 8.3 4 5
SWITCHING
R085 Q066,073
R096
100k
EVER_3.0V 88
Q066
100k ± 0.5%
FB2
-INE2
+INE2
-INE3
FB3
FB4
-INE4
+INE5
-INE5
FB5
+INE6
-INE6
FB6
FB7
-INE7
DTC6
C089 2SC584600LS0 -7.5V REG VL_16V (10/10)

C080
4.7u 4.7u A_2.8V
R100
3 6 10k
DRUM_VS R-14.9 R-0.7 ± 0.5%
/P-15.4 /P0.4
R054
2200
C056
4700p
eh IC051 ys REC/PB 1.5
5
2
0.6 Q073 CAM_-7.5V
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
FB1 GND0 L054 R101

UP04401008S0 4 1
1.2 R3.4/P2.4 220k
H -INE1 8.4 Vp-p out7 2 1 33uH
R0.5/P0 R091 ± 0.5%
IN1 R055 XX 1.5

-INS8 OUT6
7
7.1
6.9
3
Q061
XN0NE9200LS0
SWITCHING
C090
22k
CAM_15V
D_2.8V
1
IN1 NTSC: 512 kHz OUT5 8.3 4 5
4.7u
(1/10)
R056 XX 5.7 R087 A_2.8V
IN2 PAL: 485 kHz OUT4
3.4 100k
IN2 15.9 R15.1/P0
IN3 R057 XX 2.9 5.3 REG_GND
IN3 OUT3 C110 R102
IN4 R058 XX 4.8 2.5 100k
XX Q067
CAP_VS R059
XX
IN4
1
IC051 OUT2
1.9
IN7 2SA207800LS0 R15.2
/P15.8
Q067,070
15V REG
± 0.5%
IN5 DRUM/CAPSTAN PWM DRIVE, OUT1
DRUM_VS 1.4 8.3 R116 R088 R4.9
IN6 DC CONTROL,RESET VCC0 0 /P0
L051 XX 4.8
C081
I XCS_DD
R060 XX 2.9
2.9
LD
IC051
MB44A120BPFV-G-BND-ERE1
VCC1
8.3
0
R082
2.2 8.3
2.2u 33uH
4.8 5 1 15.9 Q070
0 UP04501008S0
HI_EVER_SO DIN LANC_DC
HI_EVER_SCK
3
CLK ej IC051 ya REC/PB SENSE
0
Q055
4 2 4.8
R114
0 R4.3/P5.4 R103 CAM_DD_ON
89
C053 0.1u 3 8.3 MCH3335-S 3 Q062 39k
RST VCONT -TL-E CPH5819-TL-E C111
R063 ± 0.5% (6/10)
R052 30k 47k Q064
0.8 SWITCH 8.3 R3.4/P2.4 SWITCHING R2.8/P0
RT 8.4 Vp-p LANC_SIG XX 2SC584600LS0
C054 0.1u 0 SWITCH R104
CSCP DATA_IN C075
4.7u C083 7500
3 1u R2.2/P0 ± 0.5%
SEL NTSC: 512 kHz WAKE_UP
C091 R093 C107 C106 EP_2.8V
C076
PAL: 485 kHz 4.7u C082 D055 0.1u 22k 4.7u 4.7u
MA4ZD03001S0 EP_4.6V
DATA_OUT
J 1u
4 1 0 13.6
REG_3V
EP_13.5V
OUTC3
RESET
XCTL2
R061
VOUT
CDET
VBAT
VREF
CTL1
3 2 R105
GND
VRO
4700 C084 R108

VIN
BL_REG
VR
100k
CS
CS
1u R089 Q071 XX
100k 2SA207800LS0 ± 0.5%
74 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
15.2
6 3 C108
REG_GND (BL-GND)
REG_GND
(7/10)
2.2u
90
2.4
1.2
7.7
2.5
3.1
3.3
3
3
7.7
2.9
4.8 4.9
2 5 R106
Q072
XRESET Q071,072 UP04501008S0 47k (10/10)
1 4 ± 0.5%
13.5V REG
VTR_DD_ON
BATT_IN 4.3
K R094
22k
R107
8200
-15.4 -15.4
PANEL_-15.3V
EVER_3.0V R109
R090 Q068 0
100k 2SC584600LS0 ± 5%
-14.8
3 6 R110
220k
SIGNAL PATH
REG_GND D054 0 ± 0.5%
MAS3132E0LS0
VOUT Q074
5 2 C109 REC REC/PB PB
86 (10/10)
Q068,074
15.3V REG
UP04401008S0 4 1
2.2u
L R083
470
LI_3V
0.5
R095
R111
68k Drum servo(speed and phase)
D053
100k ± 0.5%
87
0.047u
0.047u
1SS357 LANC_DC (10/10)

0.1u
0.1u
0.1u
-THP3
XX
C066 1u
C069 1u
59
C058
C065
C068
C063
DCOUT_ON (6/10)
C061
C059
Q075
UNR32A300LS0
SWITCH
05
The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont
line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que
Replace only with part number specified. par une piéce portant le numéro spécifié.
VC-341 (9/10) 4-25 4-26


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
VC-341 BOARD (10/10) CN004 8P

EVF BLOCK
A STEADYSHOT,CONNECTOR (SE BLOCK,CN BLOCK) 8 ANA_GND

LCD902
7 DIG_GND B/W
XX MARK:NO MOUNT EVF_G/BW_Y
6 VIDEO_IN LCD
THROUGH UNIT
NO MARK:REC/PB MODE PANEL_VD
5 VSYNC FP-797 FLEXIBLE
PANEL_HD
4 HSYNC
BL_CONT PANEL_VD
CN002 20P BL_CONT 84 (9/10)
21
PANEL_VD
PANEL_HD EVF_DD_ON
3 EVF_4.6V
SE_GND 1 PANEL_HD 2 NSLEEP

EVF_G/BW_Y
BL_REG 2 (2/10) EVF_G/BW_Y 1 3.3V
B BL_GND 3
BL_CONT
PANEL_SYNC
PANEL_SYNC
22 (2/10) KEY_AD0
C002
0.1u
KEY_AD0
BL_CONT 4 KEY_AD1 1.3 4.8
PANEL_B KEY_AD1
PANEL_B 5
PANEL_G XCS_LCD
71 KEY_AD2
KEY_AD2
IC001 3 2 1
PANEL_G 6
PANEL_R
XCS_LCD
60 (6/10)
KEY_AD3
KEY_AD3
3.3V REG LI_3V
86 (9/10)
PANEL_R 7 (7/10) XBATT_INFO_SW IC001
KEY_AD5 XBATT_INFO_SW
KEY_AD5 TK11133CSCL-G
PANEL_XVD 8 DIAL_A 4 5
PD-204 PANEL_SYNC KEY_AD7 DIAL_A
CN6001 C-SYNC/XHD 9 KEY_AD7 DIAL_B C003 3.3 4.8
XCS_LCD XCHARGE_LED DIAL_B 4.7u
THROUGH THE XCS_LCD_DA 10 XCHARGE_LED
C
PD-124 HARNESS
(PAGE 4-29)
XVC_SCK 11
R001 470 XVC_SCK
VC_SO
XCAM_LED
XVTR_LED
XCAM_LED 72 85 (7/10) XRESET
XRESET CN005 22P
1 REG_GND
VC_SO 12 XVTR_LED (7/10)
VC_SI XPOWER_SW 2 N.C
VC_SI(HDO) 13 BL_REG XPOWER_SW
LCD_HOLD XMODE_SW V_LIGHT_PWM 3 LI_3V
PANEL_HOLD 14 REG_GND (BL_GND)
XEJECT_SW
XMODE_SW 56 (6/10) V_LIGHT_PWM
4 D_2.8V
REG_GND 15 XEJECT_SW KEY_AD0
5 KEY_AD0
PANEL_-15.3V 16 PANEL_-15.3V
90 ZOOM_VR_AD INT_MIC
INT_MIC XBATT_INFO_SW
6 BATT_INFO
PANEL_2.8V 17 EP_2.8V
(9/10)
ZOOM_VR_AD 57 (6/10) 79 (8/10)
AUDIO_L_I/O
AUDIO_L_I/O
7 CUSTOM_LED_VDD
PANEL_4.6V 18 EP_4.6V
8 N.C
D PANEL_13.5V 19 EP_13.5V XF_TALLY_LED 2.8
UDZSTE-176.8B
KEY_AD5 LCD_HOLD XF_TALLY_LED 9 XCUSTOM_LED_ON
AD5 20 LCD_HOLD 67 (6/10)
73 SIRCS_SIG
SIRCS_SIG 1 2
D008
R018
R003 CUSTOM_LED_ON 0 2 10 REG_GND
150
XX REG_GND SIRCS_PWM
(7/10) SIRCS_PWM 1 11 XMS_LED CONTROLL KEY
Q002
CN006 16P VC_SI AV_JACK_IN UNR32A100LS0 3
BLOCK
12 N.C
XS/S_SW 1
KEY_AD7 VC_SI 94 (6/10) AV_JACK_IN
CUSTOM_LED_ON
LED DRIVE
13 MS_LED_VDD
(CF-5100)
(PAGE 4-35)
CUSTOM_LED_ON KEY_AD1
REG_GND 2
XMODE_SW 53 XS_JACK_IN
XS_JACK_IN 14 KEY_AD1
XMODE_SW 3
XPOWER_SW R021
VC_SO
XVC_SCK
VC_SO 95 (6/10) DCOUT_JACK_IN
DCOUT_JACK_IN
EVF_DD_ON
KEY_AD3
15 D_2.8V
XPOWER_SW 4 150 16 KEY_AD3
E CHARGE_LED_VDD 5
XCHARGE_LED
XVC_SCK (6/10) EVF_DD_ON
VIDEO_I/O KEY_AD2
17 D_2.8V
XCHARGE_LED 6 VIDEO_I/O 18 KEY_AD2
CONTROLL KEY
N.C 7 PANEL_R 83 S_Y_I/O
S_Y_I/O DIAL_A
19 DIAL_A
BLOCK XCAM_LED 8
XCAM_LED
XVTR_LED
PANEL_G
PANEL_R
PANEL_G
20 (8/10) S_C_I/O
S_C_I/O DIAL_B
D009
20 DIAL_B
(SS-5100) XVTR_LED 9 PANEL_B (2/10) 2 DF3A6.8FV 21 REG_GND
(PAGE 4-34) R014 PANEL_B 1 (TH3SONY)
MODE_LED_VDD 10 LANC_DC 3 22 XRESET
D_2.8V 11
82
87 (9/10) LANC_DC
XRESET
ZOOM_VR_AD
F ZOOM_VR 12
XEJECT_SW
IR_ON
EVER_3.0V
REG_GND 13
N.C 14
68 (6/10) IR_ON VL_16V
88
A_2.8V
N.C 15
XCS_EEP MT_5V (9/10)
XEJECT_SW 16 XCS_EEP CL001
65 (6/10)
SWP_DIR
SWP_DIR D_2.8V
D006 D007
MAZB068H0LS0
1 6
MAZB068H0LS0
1 6 PB_RF
PB_RF
CL002
CL003
MD2 (REG_GND) 64
2 5 2 5
39 (4/10)
REC_2
REC_2 XCS_MC_FLASH (6/10)
G 3 4 3 4
CL004
80 (8/10) REC_AFM
REC_AFM XSYS_RST 92 (7/10)
CL010
CL005
R004 R007 EEP_SI
22
± 0.5%
1k
± 0.5% 91 (5/10) CAP_FG
CAP_FG CL006
EEP_SO
63
CL007
R010 EEP_SCK (6/10)
10k XLANC_PWR_ON
± 0.5% XLANC_PWR_ON
H 15.8
15.8 77 LANC_IN
LANC_IN CL008
REC_CRRT1
3 1 R011
1k (7/10) LANC_OUT
LANC_OUT CL009
REC_CRRT0
93 (6/10)
2 5 0 R022
1k CN007 16P
XCS_EEP
15.8 Q001
CN009 30P 16 XCS_EEP
4 6 XN4601-TW
VL+ 1 VIDEO 15 EEP_SI
0 LIGHT
MIC_GND 2 DRIVE 14 EEP_SO
V_LIGHT_PWM XLANC_PWR_ON
MIC_GND 3 13 XLANC_PWR_ON
INT_MIC LANC_IN
INT_MIC 4 12 LANC_IN
I LIA1 5
LANC_OUT
11 LANC_OUT
VREF1 6 10 REG_GND
C279 PB_RF
LIA2 7 XX 9 PB_RF CPC
C278 R273
VREF2 8 22u 10k L271 8 REG_GND (FOR CHECK)
R275 REC_2
10uH
A_2.8V 9 XX 7 REC_RF
A_2.8V 10 C282 6 REG_GND
XF_TALLY_LED 0.047u R274 SWP_DIR
XF_TALLY_LED 11 10V 1M 5 SWP_DIR
CAP_FG
D_2.8V 12 4 CAP_FG
SIRCS_SIG PITCH_AD REC_AFM
J SI-039
CN755
XSIRCS_SIG 13 3 BPF_MONI
MT_5V 14 2 PB_RF
THROUGH THE D001 C280
0.7
0.9
1.3
1.3
1.3
1.3
1.3
1.3
R002 4.7u
FP-795 FLEXIBLE MT_5V 15 2200 2 MAS3132E0LS0 IR_ON 1 EEP_SCK
3 RB271
(PAGE 4-32) SIRCS_PWM/IR_DRV_EN 16 1 SIRCS_PWM 10 9 8 7 6 5 4 3 2 1
22k
SIGNAL PATH SIGNAL PATH
GND
AM1
HO1
OUT1
PASS
LO1
AV_JACK_IN 17
HI1
LIB1
LIA1
IC271
Vref1
AV_JACK_IN
AUDIO_L_I/O 18
AUDIO_L_I/O STEADYSHOT
54 VIDEO SIGNAL
AUDIO VIDEO/AUDIO/
REG_GND 19
SERVO
Vref2
VIDEO_I/O IC271 (6/10)

LIB2
LIA2
OUT2
CRST
SIGNAL SIGNAL
LO2
HI2
HO2
AM2
VCC
VIDEO_I/O 20 NJM3230V(TE2) CHROMA Y Y/CHROMA

K REG_GND 21
S_Y_I/O 11 12 13 14 15 16 17 18 19 20
S_Y_I/O 22
0.7
REC
0.9
1.3
1.3
1.3
1.3
1.3
1.3
0
2.8
C281
REG_GND 23 0.1u
XS_JACK_IN 6.3V
XS_JACK_IN 24 PB
REG_GND 25 VST_C_RESET
S_C_I/O
YAW_AD
S_C_I/O 26
R271
SIGNAL PATH
C283 C276
REG_GND 27 0.047u 1M
LACN_DC 22u
10V
RFU_DC 28 R272 REC REC/PB PB
10k
L RFU_DC 29
DCOUT_JACK_IN
DCOUT_JACK_IN 30 Capstan speed servo
TRV328/TRV428/TRV428E
05
Ref.signal
4-27 4-28 VC-341 (10/10)

4-2. SCHEMATIC DIAGRAMS PD-204 BOARD

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
PD-204 BOARD When the machine needs to be repaired,please refer to

page 1-3 to discriminate the type of LCD(TYPE C or TYPE S).
A LCD DRIVER,BACKLIGHT DRIVE

XX MARK:NO MOUNT NO MARK:REC/PB MODE 1 IC6001 ek REC/PB 2 IC6001 el REC/PB 6 IC6001 wg REC/PB 7 IC6001 wa REC/PB 8 IC6001 w; REC/PB
< >:TYPE C MODEL 5.6 Vp-p 3.2 Vp-p 3.2 Vp-p
( ):TYPE S MODEL (TYPE C) (TYPE C) (TYPE C)
460 mVp-p 470 mVp-p
5.85 Vp-p 3.5 Vp-p 3.5 Vp-p
(TYPE S) (TYPE S) (TYPE S)
CN6001 20P
H H 2H 2H 2H
FB6002
B AD5 20
XX
PANEL_13.5V 19
PANEL_4.6V 18
PANEL_2.8V 17
FB6001
TG25
TG24
TG23
TG22
TG19
PANEL_-15.3V 16
L6001
REG_GND 15 47uH
PANEL_HOLD
PANEL_HOLD 14 C6019 C6020
BLDET
XLED
EXTDA
C6002 3.3u
SO 22u 1u
VC-341 VC_SI(HDO) 13 4V 25V
SI
(10/10) VC_SO 12
C CN002
XVC_SCK 11
SCK C6001
0.1u
C6006
0.01u
CL6012
THROUGH THE XCS
<0.4>(1.4)
<0.3>(2.8)
CL6007
<1.4>(0.1)
<2.1>(1.2)
PD-124 HARNESS XCS_LCD_DA 10
<0>(2.8)
CL6016 XHD
(PAGE 4-27) C-SYNC/XHD 9 C6022
13.6
C6028
1.4
1.7
2.6
6.8
XVD 0.1u
PANEL_XVD 8 10u
CL6017 16V CN6004 24P
PANEL_R 7 4 IC6001 rs REC/PB 36 35 34 33 32 31 30 29 28 27 26 25
CL6013
24 VSH/VSH5V
R6030
PANEL_G 6
VSS2
HCNT / SPD
MCLK / CLD
CLR / CTR
OE / PSS2
PWM / PWMOP
BLDET
RESET / EX2
EXTDA
XLED
VCC3
COM OUT
D6009 5600
23 VDD/VSH3V
PANEL_B 5 2.8 Vp-p RB521S-30-TE61
22 VSS/GND
BL_CONT 4 VB
D BL_GND 3 VG
21 VB/VB
V 2.8 20 VG/VG
37
24
BL_REG 2 VDD2 NC / CSD VR
2.8 19 VR/VR
SE_GND 1 3 IC6001 r; REC/PB 1.5 TG25
38
23
BIN COM DA 18 HCNT/SPD
C6003 0.01u 1.7 TG24
4.8 17 MCLK/CLD
470 mVp-p
39
22
GIN VCC2 TG23
C6004 0.01u 1.8 RB6003 16 CLR/CTR
2.4 100 TG22
40
21
RIN VB CL6004 15 OE/PSS2 LCD901
C6005 0.01u 1.7 VB TG20
2.4 14 SRT/PSS1 2.5INCH
H COLOR
41
20
SCANEN / TEST VG CL6005 TG17 LCD
E XVD 2.4
VG
TG16
13 STBYB/RES
UNIT
42
19
XVD / VDIN VR VR 12 VBC/CLS
2.8
XHD IC6001 CL6006 11 VCOM/VCOM
43
18
HD / SYNI/HD GND2 TG19
2.6 LCD DRIVER 10 RESET/EX2
IC6001 TG15
44
17
VCC1 GND1 TYPE S 9 STBYB/PSG
2.8 TG14
CM7104L42-T4:TYPE C
XCS <2.6>(0) TG18 C6029 8 GSRT/MO2
LRS57231:TYPE S
45
16
XCS GRES / EX1 1u TG13
2.8 25V 7 GPCK/MO1
SCK Note1: IC6001 Pin Name A/B
<2.8>(1.4) TG17 TG18
46
15
XSCK STBYB / RES 6 GRES/EX1
A: TYPE C MODEL D6006
F CN6005 6P
SI
2.6
B: TYPE S MODEL <1.7>(2) TG16 1SS355TE-17
TG12
5 N.C./SPS
47
14
PANEL_REV 1 SI N.C / CLS
R6042 XX 0.2 4 VDD/VGLAC
CONTROL PANEL_REV 2 SO 2.8
48
13
SO VDD1 3 VGL/VGL
KEY Q6005
GPCK / MODE1
GSRT / MODE2
N.C. 3 2.6 R6031
BLOCK
STBYB / PSG
0 HN1B04FE-Y/GR(TPLR3) 2 VSS/GND
POCB/LOWI
SRT / PSS1
W/H / HWB
N.C. 4 R6032
(PR-5100)
CP / SPS
120k TYPE C 1 VGH/VGH
OPOUT
(PAGE 4-34) SE_GND 5
Filter2
13.5 TYPE C
VSS1
OPIN
Filter
TYPE C Note2: CN6004 Pin Name A/B
SE_GND 6 12.9
5 IC6001 rd REC/PB C6015
1u
6 4 R6020
0
A: TYPE C MODEL
B: TYPE S MODEL
1 2 3 4 5 6 7 8 9 10 11 12 16V 4.7 12.9
5
G 2.8 Vp-p 0
2
<1.4>(2.8)
<0.1>(2.8)
<0>(2.8)
<0.1>(2.2)
2.8
1.4
1.4
2.6
1.3
1.2
1 3 CL6014
4.1 13.5
9 IC6001 ql REC/PB
3.2 Vp-p RB6001 Q6004,6005
H (TYPE C) 10k SWITCH
3.5 Vp-p
(TYPE S)
TG12
TG13
TG14
TG20
TG15
PANEL_HOLD
Q6004
2H HN1B04FE-Y/GR(TPLR3)
CL6015
R6036 R6008
3.4 -15.6
H XX XX
4 6
C6030 R6012 10k 5 -15
XX C6010 1/16W ± 0.5% 2
560p 2.8
3 1
C6009 R6009 R6013 100k -15 -15.6
R6035
Q6007
0.1u 68k 1/16W ± 0.5% C6016
XX 0.01u
XX
D6007 XX
R6029 XX TYPE C RB6002
R6026 R6019
I TYPE S 0 C6024
1u
0
TYPE C
1M
TYPE S
L6004 22uH 4.7 4.7 16V
C6026 C6027
22u R6040
6.3V 0.1u Q6009
47k
2SA1832FV
(TH3SONY)
EXTDA R6041 Q6008,6009 4 R6039
1k B+ SWITCH 3900
0.1
2.6
L6002 L6003 R6005

4.7uH 1800
J 82uH
1/10W Q6008
C6032
XX
5 RN1102FV(TH3SONY)
1
D6008
XX
2 6
3
CN6003 10P
4 10 10 BL_HIGH
K 5.4 5.4
C6011
0.015u
C6013
12pF
9 N.C
2 1 6 4 8 N.C
3 5 1 T6001 7 N.C
INVERTER
3 ND901
-0.7 -0.7 TRANSFORMER 6 N.C BACKLIGHT
4 2 5 Q6003
C6007 Q6002 5 N.C
CPH5504-4TE-E XX
D6002 4.7u
XX INVERTER DRIVE 4 N.C
10V
R6011
XX 3 BL_LOW
2 LED
SIGNAL PATH
L R6001 Q6001
XX D6004
D6005
XX
1 LED_GND
XX
XLED MA111-(K8).S0 TYPE C MODEL VIDEO SIGNAL
R6002 1SS355TE-17 TYPE S MODEL
BLDET
XX
R6010 C6012 R6014
CHROMA
D6003 22k 0.1u 470
XX
LND605
REC
A
PB
M
05
The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont
line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que
Replace only with part number specified. par une piéce portant le numéro spécifié.
PD-204 4-29 4-30

4-2. SCHEMATIC DIAGRAMS SI-039 BOARD, FP-792 FLEXIBLE BOARD

1 2 3 4 5 6 7 8 9 10 11
A
SIGNAL PATH
FP-792 FLEXIBLE BOARD
VIDEO SIGNAL
AUDIO VIDEO LIGHT
CHROMA Y Y/CHROMA SIGNAL D002
NSPW500BS-TL2
REG_GND 1
REC VL+
D001 D003 D001-003
NSPW500BS-TL2 NSPW500BS-TL2 (VIDEO LIGHT)
PB
B LAND1
STATIC_GND REG_GND 3
STATIC_GND
LAND2
C
SI-039 BOARD C754
R760 XX
LND759
STEADYSHOT,JACK XX
R759
XX REG_GND 1
LND756
XX MARK:NO MOUNT R761
0 VL +
TRV328
NO MARK:REC/PB MODE /TRV428
2.8 1.3 1.3
LND760
/TRV428E 3 4 1 2
3
REG_GND
GND
OUT
GND Vref
Note: D753, D754, IC751, J751, J752 and J753 are SE751
SE752
YAW LND754
not included in SI-039 complete board.
OUT
PITCH
D
Vref
SENSOR SENSOR MIC_GND
V
C751 MIC901
XX 1 2 3 4 LND755 MICROPHONE
1.3 1.3 2.8 INT_MIC
C753
R751 XX
XX C759 CN755 30P
4V
4.7u
C755 30 VL+
2.8 XX C757 R762
VCC
3
4V XX 29 MIC_GND
XX
GND
2
28 MIC_GND
R OUT C758 VDR757
1
27 INT_MIC
4.7u
E C Y
2.8
R754
XX
26 LIA1
4 3
XX FB751 25 VREF1
C
J751 S1 6
S
Y
S
5 S2
IC751 24
23
LIA2
VREF2
S VIDEO S S REMOTE COMMANDER
OUT S3 8 G G 7 RECEIVER D759 22 A_2.8V
1 S4 TLRMV1021(T15SOY,F)
IC751 R763
2 RPM7240-V4 (TALLY) 21 A_2.8V
CGND YGND 1k
TRV228/TRV228E 20 XF_TALLY_LED
/TRV428/TRV428E
F Q751
19 D_2.8V
2SD2114KT146 R752 56
18 XSIRCS_SIG VC-341
LED DRIVE R755
XX 17 MT_5V (10/10)
3 1 3 CN009
16 MT_5V
THROUGH THE
R753
D753 D754 56 15 SIRCS_PWM/IR_DRV_EN FP-795 FLEXIBLE
2 DAC3825 DAC3825 C752
0.2 (IR EMITTER) (IR EMITTER) XX 14 AV_JACK_IN (PAGE 4-27)
13 AUDIO_L_I/O
12 REG_GND
11 VIDEO_I/O
G J752
1
2
3
GND
L
V 10 REG_GND
A/V 4 BR
5 SW 9 S_Y_I/O
OUT
7 R 8 REG_GND
6 NC
D755 D752 D751
RSE6.8XN-TR 7 XS_JACK_IN
RSE6.8XN-TR RSE6.8XN-TR
1 6 1 6 1 6 6 REG_GND
2 5 2 5 2 5 5 S_C_I/O
3 4 3 4 3 4 4 REG_GND
LND751
3 RFU_DC
STATIC_GND
2 RFU_DC
LND752
1 DCOUT_JACK_IN
STATIC_GND
H
3 R
J753 4 BR FB752 XX
RFU DC 2 L
OUT
1 GND
05
4-31 4-32 SI-039, FP-792


1 2 3 4 5
FP-302 FP-802 FLEXIBLE FP-300
FLEXIBLE FLEXIBLE
CONTROL KEY BLOCK
A
Q002
TAPE END
Q001
TAPE TOP
(SS-5100)
XX MARK:NO MOUNT
• CONTROL KEY BLOCK (SS-5100) is replaced as block,
so that PRINTED WIRING BOARD is omitted. VC-341
1 TAPE_TOP (C) (10/10)
2 TAPE_END (C) CN006
(PAGE 4-27)
D001 3 TAPE_LED (K)
TAPE LED
4 TAPE_LED (A)
B
CHARGE_LED_VDD
REG_GND
4 XPOWER_SW
5
MODE_LED_VDD
6 XCHARGE_LED
3 XMODE_SW
16 XEJECT_SW
8 XCAM_LED
9 XVTR_LED
12 ZOOM_VR
6 S REEL (-)
2 REG_GND
13 REG_GND
FP-301
1 XS/S_SW
STATIC GND
LND001
VC-341 BOARD
11 D_2.8V
7 S REEL (+)
(5/10)
7 N.C
14 N.C
15 N.C
H002 3
FLEXIBLE 2
S REEL
8
9
SENSOR_VCC
T_REEL (+)
CN404
(PAGE 4-17)
10
5
1 SENSOR 4
10 T_REEL (-)
11 HALL_COM
ME/MP
12 ME/MP
REC PROOF
13 REC_PROOF 2 4
2 H001 3 Hi8 MP S001
T REEL
1 SENSOR 4
14
15
Hi8_MP
C_LOCK_SW
C (START/STOP)
S003
S001 XX
D003 XX
D002
D001
D004
1 3
R001 1k
S002
C.C. LOCK
POWER/MODE_SW
POWER
(CHG) S004
CHG D004
CAMERA D002
D001
OFF REG_GND
D ON
XPOWER_SW
PLAY/EDIT
S901
MODE SWITCH XMODE_SW S002
1 DEW MODE
(EJECT)
2 M-SW (A)
FP-299 3
4
M-SW (B)
M-SW (C)
FLEXIBLE MR 2
1 5
6
FG1
FG VCC
RV001
20k
SENSOR 3 7 FG2 E
4 8 REG_GND
W (ZOOM) T
9 CAP_U
DEW SENSOR
10 CAP_U
11 CAP_W VC-341 BOARD 05
(5/10)
12 CAP_W
CN403
13 CAP_V (PAGE 4-17)
M902
FP-228 CAPSTAN MOTOR 14 CAP_V
15 VH+ 1 2 3 4
FLEXIBLE 3 2
16
17
HU1
HU2
HE
4
3
1
2
18
19
20
HV1
HV2
HW1
CONTROL KEY BLOCK
A
4 HE
1
21
22
HW2
VH-
(PR-5100)
XX MARK:NO MOUNT
3 2
HE • CONTROL KEY BLOCK (PR-5100) is replaced as block,
4 1 so that PRINTED WIRING BOARD is omitted.
SIGNAL PATH B S601

(PANEL REVERSE)
REC REC/PB PB
1 PANEL_REV
Capstan speed servo 2 PANEL_REV
3 N.C
PD-204
4 N.C CN6005
(PAGE 4-29)
5 SE_GND
6 SE_GND
05
4-33
FP-228, FP-299, FP-300, FP-301, FP-302, FP-802, SS-5100, PR-5100 4-34
1 2 3 4 5 6 7 8 9 10 11 12
CONTROL KEY BLOCK (CF-5100)

A
XX MARK:NO MOUNT • CONTROL KEY BLOCK (CF-5100) is replaced as block, S003 S007 S012 S015
so that PRINTED WIRING BOARD is omitted.
STOP FF REW PLAY S022
S023
( ) R005 ( ) R009 ( ) R013 ( ) R017 R020
EASY
R022
(PANEL_O/C_SW)
1200 1500 2200 3900 8200 27k
B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1 A1
2 1 2 1 2 1 2 1 2 1 2 1
B B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 4 3
B2 A2
D002
EASY
BT001
LITHIUM
BATTERY
S004
PAUSE S008 S011 S016 S020 S019 S024

C ( ) R006
1200
COUNTER RESET
R010
1500
FADER R014
2200
FOCUS
R018
3900
LIGHT R023
8200
BACKLIGHT
SEL/PUSH EXEC
1 REG_GND
N.C
B1 A1 B1 A1 B1 A1 B1 A1 B1 A1 B1
2 1 2 1 2 1 2 1 2 1 2 1 A1
LI_3V
D_2.8V
R001 10k 4
B2 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2
KEY_AD0
BATT_INFO
CUSTOM_LED_VDD B1 A1 VOLUME
D 2 1 S001 S005 S009 S013
S7
A1
COM 2
SW1A 3
SW2 4
SW1B 5
B6
N.C DSPL/BATT R015 - + R021
TIME R007 MENU R011 END SEARCH R019
3 A2 INFO 1200 1500 2200 S017 3900 S021 8200
XCUSTOM_LED_ON B2 4
REG_GND
VC-341
B1 A1 B1 A1 B1 A1 B1 A1 B1 A1
(10/10) XMS_LED
D001 2 1 2 1 2 1 2 1 2 1
CN005 XX
(PAGE 4-28) N.C
MS_LED_VDD R002 10k B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2

KEY_AD1
D_2.8V
R003 10k
E KEY_AD3
D_2.8V
S006 S010 S014 S018
KEY_AD2 R008 R012 R016
R004 DATE 1200 EXPOSURE 1500 TITLE 2200 EASY DUB
DIAL_A 10k
DIAL_B
A1 B1 A1 A1
REG_GND B1
2 1 2 1
B1 2 1 A1 B1
2 1
22 XRESET
F B1
2 1
A1
B2 4 3 A2 B2 4 3 A2 B2 4 3 A2 B2 4 3 A2
S002
4 3 RESET
B2 A2
G LND025
CH GND
VC-341 1 SIGNAL PATH

(8/10) SP(+) SP901
CN008 SP(-) SPEAKER
(PAGE 4-23) 2 AUDIO
SIGNAL
H
PB
05
4-35 4-36 CF-5100

4-4. MOUNTED PARTS LOCATION no mark : side A

* mark : side B
VC-341 BOARD
C002 D-5 * C217 D-2 C509 B-5 CN401 C-9 Q002 F-4 * R096 G-5
C003 D-5 * C218 D-1 * C513 B-5 CN402 A-7 Q051 G-8 * R097 D-9
* C053 F-9 * C251 B-6 C514 B-5 CN403 A-6 Q052 F-8 * R098 D-9
* C054 F-9 * C252 A-6 C515 B-5 * CN404 A-3 Q053 G-8 * R099 E-9
C055 G-8 C276 D-2 C601 C-7 CN481 A-5 Q054 G-7 * R100 G-5
* C056 F-9 C278 D-2 C602 C-8 * Q055 G-8 * R101 F-5
* C057 E-9 * C280 E-2 C603 C-8 D001 G-1 * Q056 F-7 * R102 F-5
* C058 G-8 * C281 D-1 C604 C-6 D006 E-9 * Q057 G-6 * R103 F-5
* C059 G-8 * C282 E-2 C605 C-7 D007 E-8 * Q058 F-6 * R104 F-5
* C060 E-8 * C283 D-2 C606 C-6 D008 G-4 * Q059 G-5 * R105 G-5
* C062 E-8 * C301 C-5 * C607 C-8 D009 F-5 * Q060 G-7 * R106 G-5
* C063 G-8 * C302 C-7 C609 D-6 D051 F-9 * Q061 G-7 * R107 G-5
* C064 E-8 * C303 C-7 C610 D-8 D052 G-8 * Q062 F-7 * R109 G-4
* C065 F-9 * C304 C-7 C611 D-6 * D053 F-9 * Q063 E-9 * R110 G-4
* C066 G-8 * C306 C-7 C614 E-6 * D054 G-8 * Q064 F-5 * R111 G-4
* C067 E-8 * C307 C-6 C615 E-7 D055 F-7 * Q065 D-8 * R114 G-6
* C068 G-8 * C309 C-7 C616 E-7 * D151 B-3 * Q066 G-4 * R116 G-6
* C069 G-8 * C310 C-7 C617 E-7 * D202 C-2 * Q067 G-5 * R152 C-3
* C070 E-8 * C320 C-6 C618 E-6 * D301 D-7 * Q068 G-4 * R155 C-3
C071 F-8 * C322 C-7 * C619 D-8 * D302 D-7 * Q069 E-9 * R162 C-3
* C072 E-8 * C323 C-5 C620 C-6 D701 D-3 * Q070 G-5 * R163 B-3
C073 F-8 * C324 C-7 C622 E-7 * Q071 G-5 * R164 A-3
* C075 G-8 * C325 C-6 C623 E-8 F001 F-8 * Q072 G-5 * R203 C-2
* C076 F-8 * C326 D-7 C624 D-8 F002 G-8 * Q073 F-4 * R204 C-2
* C078 G-6 * C328 D-7 C708 E-5 F003 F-8 * Q074 G-4 * R205 C-2
* C079 G-6 * C329 C-7 C709 F-4 F004 F-8 * Q075 E-8 * R206 C-2
* C080 G-7 * C332 D-5 C710 F-4 * Q201 C-2 * R207 C-2
* C081 F-7 * C333 D-7 C711 F-4 FB051 F-6 Q202 D-3 * R208 C-1
C082 F-7 * C334 D-7 C712 E-3 * FB151 B-3 * Q203 D-2 * R209 C-2
* C083 F-7 * C335 D-5 C713 F-3 * FB152 B-4 * Q302 C-6 * R210 C-1
C084 F-7 C339 E-5 C714 E-3 * FB251 B-6 * Q304 C-7 * R211 C-1
* C085 F-7 C401 C-9 C715 D-4 * FB252 A-6 * Q306 C-5 * R212 C-1
* C086 G-6 * C404 A-4 C801 F-2 * FB401 A-6 * Q401 A-3 * R213 D-2
* C087 F-6 * C406 A-3 C802 F-2 FB481 A-5 * Q481 A-5 * R214 D-2
* C088 G-6 * C407 A-6 C805 E-2 FB482 A-5 * Q482 A-4 * R215 D-2
* C089 G-6 * C408 A-6 * C806 F-1 FB601 D-6 * Q483 A-4 * R216 D-2
* C090 G-7 * C409 A-6 C807 E-2 * Q484 B-5 * R271 D-2
* C091 F-5 * C410 A-6 C808 F-2 IC001 D-5 * Q485 B-5 * R272 D-2
C094 F-7 * C411 A-6 * C810 F-1 * IC051 F-8 Q701 E-3 * R273 E-2
C095 G-6 * C412 A-6 * C811 F-1 * IC151 B-3 * R274 E-2
* C096 F-6 * C413 B-6 * C812 E-1 * IC152 B-4 R001 G-4 * R302 C-7
C097 G-5 * C415 B-6 * C814 E-1 * IC201 D-3 R002 F-1 * R303 C-7
C098 F-5 * C417 B-6 C815 E-2 * IC202 D-2 R004 G-1 * R306 C-7
C099 G-5 * C420 B-7 * C816 E-1 * IC251 B-6 R005 E-7 * R307 C-7
C100 F-6 * C423 A-7 C817 E-2 * IC271 E-2 R006 E-7 * R308 C-7
C102 F-6 * C424 B-7 * C818 E-2 * IC301 D-6 R007 G-1 * R309 C-7
C103 F-5 * C425 B-7 * C819 F-2 * IC302 E-4 R010 G-1 * R310 C-7
C104 G-5 * C426 A-7 C820 E-2 * IC401 B-7 R011 G-1 * R311 C-7
* C105 D-9 * C427 A-7 * C821 E-2 IC481 B-5 R014 E-9 * R314 D-7
* C106 G-4 * C428 A-7 * C822 F-2 IC601 D-7 R018 F-4 * R315 C-7
* C107 F-5 * C429 B-8 * C823 G-2 * IC602 D-8 R021 E-9 * R316 C-5
* C108 G-5 * C430 A-7 C825 F-2 IC701 E-4 * R022 D-8 * R317 C-5
* C109 G-4 * C431 B-8 * C826 G-2 * IC801 F-2 R051 F-8 * R318 C-5
* C152 B-4 * C432 B-7 * C828 F-2 * R052 F-9 * R319 C-5
* C156 C-3 * C433 B-7 * C829 E-2 L051 F-7 R053 G-8 * R320 C-5
* C157 C-4 * C434 B-7 * C830 F-2 L052 G-6 * R054 F-9 * R321 C-6
* C158 B-3 * C435 B-8 * C831 G-2 L053 G-7 * R061 F-9 * R322 C-6
* C160 C-5 * C436 B-7 * C832 E-2 L054 G-7 R062 G-8 * R323 C-6
* C161 B-4 * C437 B-7 * C833 G-2 L055 F-7 * R063 F-5 * R324 C-6
* C163 B-3 * C439 B-7 * C834 F-2 L056 F-6 R064 F-8 * R325 C-6
* C164 B-3 * C441 B-8 * C835 E-2 L057 G-6 * R065 E-9 * R327 C-6
* C165 C-3 * C442 B-8 * C836 F-2 L058 F-6 * R066 E-8 * R328 C-6
* C166 B-3 * C443 A-7 * C837 E-2 L059 G-6 R067 F-8 * R330 C-7
* C167 B-5 * C444 A-7 * C839 G-2 * L060 F-6 R068 G-8 * R331 C-7
* C168 B-5 * C445 A-8 * C840 F-3 L061 F-5 * R069 E-8 * R332 D-7
* C169 B-5 * C481 A-5 C841 E-2 L062 F-6 * R070 E-8 R333 C-5
* C170 B-5 * C482 A-5 * C842 F-2 L063 F-5 * R071 E-8 * R334 D-5
* C171 B-5 * C483 A-5 * C843 F-2 L064 G-5 * R072 E-8 * R335 D-7
* C172 C-5 * C484 A-5 * C844 F-2 L065 F-6 * R073 E-8 * R336 D-7
* C173 C-5 * C486 A-5 C845 F-2 L066 G-5 * R074 E-8 * R339 C-4
* C176 C-5 * C487 A-5 C846 G-2 * L151 C-4 * R075 E-8 * R341 E-7
* C177 C-4 C488 A-5 * C847 E-2 L201 D-3 * R076 E-8 R401 A-6
* C179 C-5 C489 A-5 C848 F-3 * L202 D-1 * R077 E-8 R402 A-6
* C202 D-1 * C490 A-4 C849 F-2 * L271 D-2 * R078 E-8 * R403 A-3
* C203 C-2 * C491 A-4 * C850 E-2 * L301 C-7 * R082 G-8 * R404 A-4
* C204 C-2 * C492 A-4 * L302 D-7 * R083 F-9 * R405 A-3
* C205 D-2 C493 A-5 CN002 G-4 * L303 C-5 * R085 G-4 * R409 A-3
* C206 C-2 C494 A-5 CN004 D-5 * L304 C-7 * R086 D-9 * R410 B-6
* C207 C-1 * C495 A-5 CN005 F-5 * L308 D-7 * R087 G-5 * R411 B-6
C208 D-3 C496 A-5 CN006 E-9 * L481 A-5 * R089 G-5 * R412 B-7
* C209 C-1 C497 A-4 * CN007 D-9 * L482 A-4 * R090 G-4 * R413 A-7
C210 E-3 * C498 A-5 CN008 G-3 * L483 A-5 * R091 F-5 * R414 A-7
* C211 D-1 * C500 A-4 CN009 E-1 * L484 A-4 * R092 E-9 * R424 B-8
* C212 D-2 C505 B-4 CN053 F-9 * L801 F-3 * R093 F-5 * R426 A-7
* C214 D-2 C507 B-5 CN151 C-5 * R094 G-5 * R427 A-8
* C215 D-2 C508 B-5 CN201 D-4 Q001 G-1 * R095 G-4 * R431 B-7
4-53 VC-341
no mark : side A
* mark : side B
PD-204 BOARD SI-039 BOARD
* R481 A-4 C6001 A-2 C758 B-4
* R482 A-5 C6002 B-2 C759 C-3
* R483 A-5 C6003 A-3
R484 A-5 C6004 A-2 * CN755 C-4
R487 A-5 C6005 A-2
* R488 A-5 C6006 B-3 D751 C-2
* R489 A-5 C6007 A-4 D752 C-2
* R490 A-4 C6009 B-2 * D753 B-2
* R491 A-4 C6010 B-2 * D754 B-2
* R492 A-5 C6011 A-5 D755 C-3
R493 A-5 C6012 D-3 D759 C-2
R494 A-4 C6013 C-4
R495 B-5 C6015 C-2 * FB751 C-3
R601 C-7 C6016 C-2
R602 C-7 C6019 A-3 * IC751 C-2
R616 E-7 C6020 A-3
R619 E-6 C6022 C-2 * J751 D-2
R636 C-8 C6024 C-2 * J752 A-1
R704 F-4 C6026 C-3 * J753 B-1
R707 E-3 C6027 C-3
R708 E-3 C6028 B-3 Q751 A-2
R709 E-3 C6029 B-3
R710 E-3 R752 B-2
R711 E-3 CN6001 B-1 R753 B-2
R712 F-4 CN6003 D-4 R761 B-4
R713 E-3 CN6004 D-1 R763 B-2
R714 E-5 CN6005 C-1
R715 E-3 SE751 B-3
R716 D-4 D6004 D-3 * SE752 B-3
R717 D-4 D6006 B-3
R718 D-4 D6009 B-3
* R806 F-1
* R807 F-1 FB6001 B-2
* R810 E-1
* R811 G-2 IC6001 B-2
* R812 E-1
* R815 E-2 L6001 A-3
* R817 G-2 L6002 A-4
* R818 E-2 L6003 A-4
* R819 F-3 L6004 C-3
* RB201 D-1 Q6002 A-4

* RB202 D-2 Q6004 C-2
RB203 D-4 Q6005 C-2
* RB271 E-1 Q6008 C-3
* RB301 C-7 Q6009 C-3
* RB302 C-6
* RB401 A-6 R6005 B-4
* RB481 A-4 R6009 B-2
RB482 B-5 R6010 D-3
* RB483 A-4 R6012 B-2
RB601 C-6 R6013 B-2
RB605 D-8 R6014 D-3
RB606 D-6 R6019 C-2
RB608 E-7 R6020 C-2
RB610 E-6 R6026 C-3
* RB611 D-8 R6030 B-3
RB612 D-6 R6031 B-3
RB613 D-8 R6032 B-2
RB701 F-5 R6039 C-3
RB703 F-4 R6040 C-3
RB704 F-3 R6041 C-3
RB705 E-5
RB706 E-5 RB6001 C-2
RB708 D-3 RB6002 C-2
RB801 F-2 RB6003 B-2
* X151 B-3 T6001 B-4

X601 C-8
X701 D-4
X702 E-3
VC-341, PD-204, SI-039 4-54E

NOTE
5. REPAIR PARTS LIST

NOTE: Characters A to L of the electrical parts list indicate location of exploded views in which the desired part is shown.
Link EXPLODED VIEWS
A B C D
OVERALL ASSEMBLY FRONT PANEL BLOCK LENS BLOCK LCD BLOCK
E F G H
CABINET R BLOCK EVF BLOCK BATTERY PANEL BLOCK MD FRAME BLOCK
I J K L
CASSETTE COMPARTMENT MECHANICAL CHASSIS MECHANICAL CHASSIS

ASSEMBLY, DRUM ASSEMBLY LS CHASSIS BLOCK ASSEMBLY BLOCK ASSEMBLY-1 BLOCK ASSEMBLY-2
Link ELECTRICAL PARTS LIST ACCESSORIES
CD-465 BOARD C FP-792 FLEXIBLE BOARD B SI-039 BOARD B
FP-300 FLEXIBLE BOARD J FP-802 FLEXIBLE BOARD J VC-341 BOARD H
FP-301 FLEXIBLE BOARD J PD-204 BOARD (TYPE C) D
FP-302 FLEXIBLE BOARD J PD-204 BOARD (TYPE S) D

NOTE:
• -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number,
the original one. please include the board name.
• Items marked “*” are not stocked since they are seldom required for routine
service. Some delay should be anticipated when ordering these items. The components identified by mark 0 or
• The mechanical parts with no reference number in the exploded views are not dotted line with mark 0 are critical for safety.
supplied. Replace only with part number specified.
• Due to standardization, replacements in the parts list may be different from Les composants identifiés par une marque
the parts specified in the diagrams or the components used on the set. 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
• CAPACITORS:
le numéro spécifié.
uF: µF
• COILS
uH: µH About PD-204 board and LCD module, dis-
• RESISTORS criminate LCD type on the machine referring
All resistors are in ohms. to page 1-3, and replace the same type.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
• Abbreviation
AR : Argentine model
AUS : Australian model
BR : Brazilian model
CND : Canadian model
EE : East European model
HK : Hong Kong model
JE : Tourist model
NE : North European model
5-1
5-1. EXPLODED VIEWS

5-1-1. OVERALL ASSEMBLY
6
EVF block
(See page 5-7.)
2 2
2
5 7
11 2
MD frame block
(See page 5-9.) Battery panel block
(See page 5-8.)
8
2 10
3
2
4
9
Cabinet R block
(See page 5-6.)
2
ns
Front panel block 11

(See page 5-3.) 2
2 11
LCD block
Lens block (See page 5-5.)
(See page 5-4.)
Ref. No. Part No. Description Ref. No. Part No. Description
1 X-3953-964-1 CABINET (C) (515) ASSY, P 7 3-087-810-01 LID (51), CPC
2 3-080-203-31 SREW (M2), LOCK ACE, P2 8 CAUTION RETAINER (51), EVF FLEXIBLE
3 3-087-813-01 COVER (51), JACK 9 3-079-012-01 SCREW (30), TRIPOD
4 3-087-812-01 SHEET (51), JACK 10 3-087-831-01 LABEL (51) (TRV128/TRV228/TRV228E)
5 3-087-811-01 CABINET (UPPER) (51) 10 3-087-831-11 LABEL (51) (TRV328/TRV428/TRV428E)
6 3-078-889-11 SCREW (M1.7) 11 3-080-204-21 SCREW TAPPING, P2
CAUTION :
For the part of 8 : RETAINER (51), EVF FLEXIBLE
(3-088-616-01), cut WOVEN (T0.25), FABRIC NON
(3-076-631-01) into the desired length and use it.
5-2
5-1-2. FRONT PANEL BLOCK

ns: not supplied 60
58
D002 D001
J752 D003
ns
58
D753
D754
J753
IC751 SI-
03
9
J751
58
59
57
56
55 ns
53
54 58
ns
52
MIC901
51 (Note) D753, D754, IC751, J751, J752 and J753 are not
included in SI-039 complete board.
51 3-087-738-01 RETAINER (51), MICROPHONE 60 1-860-929-11 FP-792 FLEXIBLE BOARD
52 3-087-740-01 PLATE (51), MAGNIFICATION D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
53 X-3953-959-1 PANEL (515) ASSY, FRONT (TRV228/TRV228E) D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
53 X-3953-960-1 PANEL (520) ASSY, FRONT (TRV328) D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
53 X-3953-961-1 PANEL (525) ASSY, FRONT (TRV428E) D753 8-719-060-65 DIODE DCC3810 (IR EMITTER) (Note)
53 X-3954-020-1 PANEL (510) ASSY, FRONT (TRV128) D754 8-719-060-65 DIODE DCC3810 (IR EMITTER) (Note)
54 3-087-739-01 PLATE (51), NAME IC751 6-704-975-01 IC RPM7240-V4
55 3-087-743-01 SCREW (51), FILTER (TRV228/TRV228E/TRV428/TRV428E)
56 3-087-742-01 RING (51), FRONT J751 1-778-518-11 CONNECTOR, EXTERNAL (S VIDEO OUT) (Note)
57 3-087-749-01 COVER (51), S TERMINAL J752 1-778-040-11 JACK, SMALL TYPE (A/V OUT) (Note)
J753 1-817-944-11 JACK, SMALL TYPE (RFU DC OUT) (Note)
58 3-080-204-21 SCREW, TAPPING, P2
59 A-7111-950-A SI-039 BOARD, COMPLETE (Note) MIC901 1-542-567-11 MICROPHONE
(TRV128/TRV228/TRV228E)
59 A-7111-951-A SI-039 BOARD, COMPLETE (Note)
5-3
5-1-3. LENS BLOCK
104
CD
105
-46
5
103
102
IC951
(Note)
101
(Note) Be sure to read “Precuations for Replacement of CCD

Imager” on page 4-8 when changing the CCD imager.
101 8-848-765-01 DEVICE, LENS LSV-820A 105 3-080-204-21 SCREW, TAPPING, P2
102 1-758-865-11 FILTER BLOCK OPTICS IC951 A-7013-219-A CCD BLOCK ASSY (CCD IMAGER)
103 3-053-973-01 RUBBER (W), SEAL (TRV128/TRV228/TRV328/TRV428) (Note)
104 A-7111-944-A CD-465 BOARD, COMPLETE IC951 A-7013-276-A CCD BLOCK ASSY (CCD IMAGER)
(TRV228E/TRV428E) (TRV228E/TRV428E) (Note)
104 A-7111-945-A CD-465 BOARD, COMPLETE
(TRV128/TRV228/TRV328/TRV428)
5-4
5-1-4. LCD BLOCK
151
LCD901
ND901
152
153
4
-20
PD
154
155
(Note) About PD-204 board and LCD module, discriminate LCD

type on the machine referring to page 1-3, and replace
the same type.
The components identified by Les composants identifiés par une

mark 0 or dotted line with marque 0 sont critiques pour la
mark 0 are critical for safety. sécurité.
Replace only with part num- Ne les remplacer que par une pièce
ber specified. portant le numéro spécifié.
151 3-087-780-01 CABINET (M) (51), P LCD901 1-805-137-51 INDICATOR MODULE LIQUID CRYSTAL
152 3-087-781-01 FRAME (51), PANEL (TYPE S) (Note)
153 A-7111-949-A PD-204 BOARD, COMPLETE (TYPE C) (Note) LCD901 1-805-138-21 INDICATOR MODULE LIQUID CRYSTAL
153 A-7111-948-A PD-204 BOARD, COMPLETE (TYPE S) (Note) (TYPE C) (Note)
154 3-080-204-21 SCREW, TAPPING, P2 0 ND901 1-518-951-11 TUBE, FLUORESCENT, COLD CATHODE
155 3-078-889-11 SCREW (M1.7)
5-5
5-1-5. CABINET R BLOCK
202
203
201
%
203 204
205
203
203
206
209
207
208
210
! : Included
BT001 (BATTERY, LITHIUM SECONDARY)
in the control switch block (CF-5100).
201 1-478-416-11 KEY BLOCK, CONTROL (CF-5100) 206 3-087-825-01 COVER (C) (51), HINGE
202 3-080-206-11 SCREW, TAPPING, P2 207 3-078-889-11 SCREW (M1.7)
203 3-080-205-21 SCREW, TAPPING, P2 208 1-478-418-11 KEY BLOCK, CONTROL (PR-5100)
204 1-962-648-11 HARNESS (PD-124) 209 X-3953-962-1 HINGE (51) ASSY
205 3-087-826-01 COVER (M) (51), HINGE 210 X-3953-963-1 CABINET (R) (515) ASSY
5-6
5-1-6. EVF BLOCK

ns: not supplied
251
253
254
255
252 254
256 ns
LCD902
ns
ns
257
258
251 X-3953-965-1 CABINET (UPPER) (515) ASSY, EVF 257 3-080-203-31 SCREW (M2), LOCK ACE, P2
252 X-3951-166-1 LENS (M) ASSY, VF 258 1-860-928-11 FP-797 FLEXIBLE BOARD
253 X-3953-966-1 CABINET (LOWER) (515) ASSY, EVF LCD902 1-805-465-61 INDICATOR MODULE LIQUID CRYSTAL
254 3-080-204-21 SCREW, TAPPING, P2 (TRV128/TRV228/TRV328/TRV428)
255 X-3953-967-1 BASE (51) ASSY, SLDE LCD902 1-805-465-81 INDICATOR MODULE LIQUID CRYSTAL
(TRV228E/TRV428E)
256 3-087-788-01 BASE (51), SLIDE
5-7
5-1-7. BATTERY PANEL BLOCK

ns: not supplied
ns
304
BT901
301
303
302
301 3-087-799-01 SHEET METAL (LOWER) (51), STRAP 304 3-072-305-01 LID (2500), JACK
302 3-078-889-11 SCREW (M1.7) BT901 1-694-772-11 TERMINAL BOARD, BATTERY
303 X-3953-968-1 PANEL (515) ASSY, BATTERY
5-8
5-1-8. MD FRAME BLOCK 365

ns: not supplied
366
351
352 ns
367
364
ns
363
353 ns
362
354
365
Mechanism deck block
(See page 5-10 to 5-13.)
ns
355 355
355
356
355 1
355 -34
VC
357
361
359
358 360
351 1-478-417-11 KEY BLOCK, CONTROL (SS-5100) 360 1-827-980-11 CABLE, FLEXIBLE FLAT (FFC-005)
352 3-080-253-01 SCREW (M1.7), LOCK ACE, P2 361 3-088-391-01 SHEET (51), SHIELD, DD
353 X-3953-958-1 FRAME (51) ASSY, CS 362 X-3953-957-1 CABINET (L) (51) ASSY
354 3-080-204-21 SCREW, TAPPING, P2 363 3-978-765-01 SLIDER, G LOCK
355 3-078-889-11 SCREW (M1.7) 364 3-087-802-01 BELT (51), GRIP
356 3-066-169-01 SHEET (30), MD 365 3-080-203-31 SREW (M2), LOCK ACE, P2
357 3-087-809-01 FRAME (51), MD 366 3-087-832-01 LABEL (L) (51) (TRV128)
358 1-860-926-12 FP-795 FLEXIBLE BOARD 366 3-087-832-11 LABEL (L) (51) (TRV228)
359 A-7112-396-A VC-341 BOARD, COMPLETE (SERVICE) 366 3-087-832-21 LABEL (L) (51) (TRV228E)
(TRV428E) 366 3-087-832-31 LABEL (L) (51) (TRV328)
359 A-7112-394-A VC-341 BOARD, COMPLETE (SERVICE)
(TRV228E) 366 3-087-832-51 LABEL (L) (51) (TRV428)
366 3-087-832-61 LABEL (L) (51) (TRV428E)
359 A-7112-393-A VC-341 BOARD, COMPLETE (SERVICE) 367 3-080-204-11 SCREW, TAPPING, P2
(TRV128/TRV228)
359 A-7112-395-A VC-341 BOARD, COMPLETE (SERVICE)
(TRV328/TRV428)
5-9
5-1-9. CASSETTE COMPARTMENT ASSEMBLY, DRUM ASSEMBLY

ns: not supplied
701
702
701
703
705
704
706 707
708
LS chassis block
M901 assembly
(See page 5-11.)
709
712
711
Mechanical chassis block

assembly
(See page 5-12 to 5-13.)
710
701 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 709 3-947-503-01 SCREW (M1.4)
702 3-065-895-01 LEVER, REEL RELEASE 710 X-3951-299-1 SCREW ASSY, DRUM FITTING
703 3-065-896-01 PLATE, BLIND 711 3-074-309-01 ROLLER A, LS GUIDE
704 X-3951-298-1 CASSETTE COMPARTMENT ASSY 712 7-624-101-04 STOP RING 1.2 (E TYPE)
705 X-3951-302-1 DAMPER ASSY M901 A-7048-988-A DRUM (DGH-0F3B-R) (SERVICE) (MDX-M2100)
706 X-3951-297-1 GEAR ASSY, R DRIVE
707 3-065-840-01 CUT (0.98X3X0.13), LUMILER (W) M901 A-7048-990-A DRUM (DGH-0F4B-R) (SERVICE) (MDX-M2101)
708 3-065-935-01 HLC CUT 1.8X4X0.5 (TRV228E/TRV428E)
5-10
5-1-10. LS CHASSIS BLOCK ASSEMBLY 767

759 S001
ns: not supplied 760 764
757 758 766

768
763 765 769
762 761 770

756 771
755 772
781
775 778 780
752
Q001 S002 776
H001
779
774
FP-802
ns H002
777 773
Q002
FP-301
ns D001
FP-300 FP-302
ns ns
ns
754
753
752
783
751
751 3-065-822-02 RAIL (S), GUIDE 771 3-065-830-01 SPRING, S RATCHET
752 3-947-503-01 SCREW (M1.4) 772 X-3951-288-1 TABLE (T) ASSY, REEL
753 A-7096-416-B BASE (S) BLOCK ASSY, GUIDE 773 3-065-819-01 SPRING, TG1 ARM
754 A-7096-415-A BASE (T) BLOCK ASSY, GUIDE 774 3-065-821-01 RAIL (T), GUIDE
755 A-7096-426-A CHASSIS ASSY, LS 775 X-3951-289-1 TABLE (S) ASSY, REEL
756 3-065-802-01 SPRING, TG7 ARM 776 3-065-833-01 GUIDE, LOCK

757 A-7096-414-A ARM BLOCK ASSY, TG7 777 3-065-831-01 PLATE (SPR), RE RETURN
758 3-065-801-01 RETAINER, TG7 778 X-3951-304-1 ARM ASSY, TG1
759 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 779 3-065-835-01 GUIDE (S), CASSETTE
760 X-3951-303-1 ARM ASSY, PINCH 780 3-065-820-01 SPRING, RVS ARM
761 3-065-823-01 ARM, T RATCHET 781 X-3951-296-1 BAND (ASSY), BT

762 3-065-794-01 ROAD (SPR), PINCH ARM 783 3-067-167-01 SCREW (M1.4X2), CAMERA TAPPING
763 3-065-792-01 ROLLER, P LIM ARM D001 8-719-988-42 DIODE GL453 (TAPE LED)
764 3-065-834-01 GUIDE (T), CASSETTE H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL)
765 3-065-824-01 SPRING, T RATCHET H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL)
766 A-7096-417-A SOFT ASSY, T Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP)
767 3-071-650-01 SCREW (M1.7) (S) Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END)
768 3-065-832-01 PLATE, LS CAM S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF)
769 3-065-828-01 ARM, S RATCHET S002 1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C. C. LOCK)
770 3-065-829-01 PLATE, S RATCHET (RE)
5-11
5-1-11. MECHANICAL CHASSIS BLOCK ASSEMBLY-1

ns: not supplied
811 816 815

819
805
824
ns
815 805 817

810
809 814
802
807 813
M902
812 802
815
821 M903
820
822
806
823
802
808
818
804
803
Mechanical chassis
block assembly-2
(See page 5-13.)
801
801 A-7096-422-A BASE ASSY, DRUM 814 3-065-881-01 SPRING, P PRESSURE PLATE
802 3-947-503-01 SCREW (M1.4) 815 3-065-934-01 HLW CUT 0.98X3X0.25
803 3-065-928-01 SPACER, GROUND 816 1-786-096-11 SWITCH, ROTARY
804 3-065-927-01 GROUND, DRUM 817 3-065-898-01 SPRING, EJECT ARM
805 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 818 3-065-870-01 ROLLER, LS GUIDE
806 3-067-154-01 SPRING, CAPSTAN 819 A-7096-421-A ARM ASSY, HCL

807 3-065-931-01 RAIL (T2), GUIDE 820 3-065-918-01 GEAR (2), CAM RELAY
808 X-3947-398-1 SCREW ASSY, M1.7 PW 821 A-7096-419-A GEAR ASSY, CHANGE
809 3-065-933-01 PAN (2 MAIN 1.4X4.5), CAMERA 822 3-065-902-01 BELT, TIMING
810 1-677-049-11 FP-228 FLEXIBLE BOARD 823 3-065-905-01 GEAR, RELAY
811 1-680-434-11 FP-299 FLEXIBLE BOARD 824 3-065-882-01 ARM, EJECT

812 3-065-877-01 PLATE (T), GUIDE LOCK M902 8-835-701-01 MOTOR, DC SCE13A/C-NP (CAPSTAN)
813 X-3951-301-1 PLATE ASSY, PINCH PRESSURE M903 A-7096-420-A MOTOR ASSY, LD (LOADING)
5-12
5-1-12. MECHANICAL CHASSIS BLOCK ASSEMBLY-2
860
863
861
859
862
857
864
858
865
856
853 855
866
854
852
851
867
868
851 3-065-920-01 ARM, HC DRIVE 860 7-624-101-04 STOP RING 1.2 (E TYPE)
852 3-065-913-01 GEAR (4), LD 861 A-7096-412-A GEAR (T) ASSY, GUIDE
853 3-065-914-01 SHEET, COVER 862 X-3951-307-1 PLATE ASSY, M SLIDE
854 3-065-917-01 GEAR (1), CAM RELAY 863 X-3951-305-1 ARM ASSY, LS
855 3-065-934-01 HLW CUT 0.98X3X0.25 864 3-065-901-01 ROLLER, LS ARM
856 3-065-915-01 GEAR (1), CAM 865 3-065-916-01 GEAR (2), CAM
857 3-065-878-01 PLATE (S), GUIDE LOCK 866 3-065-919-01 ARM, T1 LIMITTER
858 3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA 867 X-3951-308-1 ARM ASSY, GL
859 A-7096-413-A GEAR (S) ASSY, GUIDE 868 X-3951-300-2 CHASSIS ASSY, MECHANICAL
5-13
CD-465 FP-300 FP-301 FP-302 FP-792 FP-802 PD-204 (TYPE C)
5-2. ELECTRICAL PARTS LIST

A-7111-944-A CD-465 BOARD, COMPLETE 1-860-929-11 FP-792 FLEXIBLE BOARD
(TRV228E/TRV428E) ********************
A-7111-945-A CD-465 BOARD, COMPLETE (D001, D002 and D003 are not included in this flexible board.)
*********************** < DIODE >
(IC951 is not included in this complete board.)
D001 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
< CAPACITOR > D002 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
D003 6-500-744-01 DIODE NSPW500BS-TL2 (VIDEO LIGHT)
C951 1-126-395-11 ELECT CHIP 22uF 20% 16V
C953 1-128-994-21 ELECT CHIP 47uF 20% 10V
C955 1-164-360-11 CERAMIC CHIP 0.1uF 16V FP-802 FLEXIBLE BOARD (Not Supplied)
********************
< CONNECTOR >
< HOLE ELEMENT >
CN951 1-779-331-11 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 14P
H001 8-719-033-37 ELEMENT, HALL HW-105C (T REEL)
< IC > H002 8-719-033-37 ELEMENT, HALL HW-105C (S REEL)
IC951 A-7013-219-A CCD BLOCK ASSY (CCD IMAGER) (Note) < SWITCH >
IC951 A-7013-276-A CCD BLOCK ASSY (CCD IMAGER) (Note) S001 1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF)
(TRV228E/TRV428E) S002 1-572-688-11 SWITCH, PUSH LEVER (1 KEY) (C.C. LOCK)
< COIL >

A-7111-949-A PD-204 BOARD, COMPLETE (TYPE C)
L951 1-469-528-91 INDUCTOR 100uH ***********************
< TRANSISTOR > < CAPACITOR >
Q951 8-729-117-73 TRANSISTOR 2SC4178-F14 C6001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C6002 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
< RESISTOR > C6003 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C6004 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
R952 1-208-635-11 METAL CHIP 10 0.5% 1/16W C6005 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
R953 1-218-965-11 RES-CHIP 10K 5% 1/16W
FP-300 FLEXIBLE BOARD (Not Supplied) C6009 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
******************** C6010 1-164-739-11 CERAMIC CHIP 560PF 5% 50V
< PHOTO TRANSISTOR >
Q001 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE TOP) C6013 1-100-371-11 CERAMIC CHIP 12PF 5% 3.15KV
C6015 1-127-573-11 CERAMIC CHIP 1uF 10% 16V
C6019 1-104-847-11 TANTAL. CHIP 22uF 20% 4V
FP-301 FLEXIBLE BOARD (Not Supplied) C6020 1-110-457-11 ELECT CHIP 3.3uF 20% 25V
********************
< DIODE > C6024 1-127-573-11 CERAMIC CHIP 1uF 10% 16V
C6026 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V
D001 8-719-988-42 DIODE GL453S (TAPE LED) C6027 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C6028 1-115-407-11 ELECT CHIP 10uF 16V
FP-302 FLEXIBLE BOARD (Not Supplied) < CONNECTOR >

********************
CN6001 1-794-997-11 PIN, CONNECTOR 20P
< PHOTO TRANSISTOR > CN6003 1-764-709-11 FFC/CONNECTOR, FPC (LIF) 10P
CN6004 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P
Q002 8-729-907-25 PHOTO TRANSISTOR PT4850F (TAPE END) CN6005 1-816-176-11 CONNECTOR, FFC/FPC (ZIF) 6P
< DIODE >
D6004 8-719-073-01 DIODE MA111-(K8).S0

D6009 8-719-071-34 DIODE RB521S-30-TE61
Note: Be sure to read “Precautions for Replacement of

CCD Imager” on page 4-8 when changing the
CCD imager.
5-14
PD-204 (TYPE C) PD-204 (TYPE S)
< FERRITE BEAD > C6022 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
FB6001 1-414-760-21 FERRITE, EMI (SMD) (1608) C6026 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V
< IC >
C6028 1-115-407-11 ELECT CHIP 10uF 16V
IC6001 6-705-329-01 IC CM7104L42-T4 C6029 1-125-827-91 CERAMIC CHIP 1uF 10% 25V
< COIL > < CONNECTOR >
L6001 1-469-527-91 INDUCTOR 47uH CN6001 1-794-997-11 PIN, CONNECTOR 20P

L6002 1-412-056-11 INDUCTOR 4.7uH CN6003 1-764-709-11 CONNECTOR, FFC/FPC (LIF) 10P
L6003 1-428-878-11 INDUCTOR 82uH CN6004 1-815-031-11 FFC/CONNECTOR, FPC (ZIF) 24P
L6004 1-469-526-91 INDUCTOR 22uH CN6005 1-816-176-11 CONNECTOR, FFC/FPC (ZIF) 6P
< TRANSISTOR > < DIODE >
Q6002 6-550-065-01 TRANSISTOR CPH5504-TL-E D6004 8-719-988-61 DIODE 1SS355TE-17

D6006 8-719-988-61 DIODE 1SS355TE-17
< RESISTOR > D6009 8-719-071-34 DIODE RB521S-30-TE61
R6005 1-216-824-11 METAL CHIP 1.8K 5% 1/10W < FERRITE BEAD >
R6009 1-218-975-11 RES-CHIP 68K 5% 1/16W
R6010 1-218-969-11 RES-CHIP 22K 5% 1/16W FB6001 1-414-760-21 FERRITE, EMI (SMD)(1608)
R6012 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
R6013 1-208-935-11 METAL CHIP 100K 0.5% 1/16W < IC >
R6014 1-218-949-11 RES-CHIP 470 5% 1/16W IC6001 6-705-330-01 IC LRS57231

R6019 1-218-990-11 SHORT CHIP 0
R6020 1-218-990-11 SHORT CHIP 0 < COIL >
R6026 1-218-990-11 SHORT CHIP 0
R6030 1-218-962-11 RES-CHIP 5.6K 5% 1/16W L6001 1-469-527-91 INDUCTOR 47uH
L6002 1-412-056-11 INDUCTOR 4.7uH
R6031 1-218-990-11 SHORT CHIP 0 L6003 1-428-878-11 INDUCTOR 82uH
R6032 1-218-978-11 RES-CHIP 120K 5% 1/16W L6004 1-469-526-91 INDUCTOR 22uH
< COMPOSITION CIRCUIT BLOCK > < TRANSISTOR >
RB6003 1-234-372-21 RES, NETWORK 100 x 4 (1005) Q6002 6-550-065-01 TRANSISTOR CPH5504-TL-E
Q6004 8-729-054-48 TRANSISTOR UP04601008S0
< TRANSFORMER > Q6005 8-729-054-48 TRANSISTOR UP04601008S0
Q6008 6-550-242-01 TRANSISTOR DTC114EMT2L
0 T6001 1-435-786-31 TRANSFORMER, INVERTER Q6009 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R
< RESISTOR >

A-7111-948-A PD-204 BOARD, COMPLETE (TYPE S)
*********************** R6005 1-216-824-11 METAL CHIP 1.8K 5% 1/10W
R6009 1-218-975-11 RES-CHIP 68K 5% 1/16W
< CAPACITOR > R6010 1-218-969-11 RES-CHIP 22K 5% 1/16W
R6012 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
C6001 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V R6013 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
C6003 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R6014 1-218-949-11 RES-CHIP 470 5% 1/16W
C6004 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R6030 1-218-962-11 RES-CHIP 5.6K 5% 1/16W
C6005 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R6039 1-218-960-11 RES-CHIP 3.9K 5% 1/16W
R6040 1-218-973-11 RES-CHIP 47K 5% 1/16W
C6006 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V R6041 1-218-953-11 RES-CHIP 1K 5% 1/16W
C6009 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V < COMPOSITION CIRCUIT BLOCK >
C6010 1-164-739-11 CERAMIC CHIP 560PF 5% 50V
C6011 1-163-023-00 CERAMIC CHIP 0.015uF 10% 50V RB6001 1-234-378-21 RES, NETWORK 10K x 4 (1005)
RB6002 1-234-384-11 RES, NETWORK 1M x 4 (1005)
C6012 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V RB6003 1-234-372-21 RES, NETWORK 100 x 4 (1005)
C6013 1-100-371-11 CERAMIC CHIP 12PF 5% 3.15KV
C6015 1-127-573-11 CERAMIC CHIP 1uF 10% 16V < TRANSFORMER >
C6019 1-104-847-11 TANTAL. CHIP 22uF 20% 4V 0 T6001 1-435-786-31 TRANSFORMER, INVERTER
C6020 1-110-457-11 ELECT CHIP 3.3uF 20% 25V

5-15 ber specified. portant le numéro spécifié.
SI-039 VC-341
A-7111-950-A SI-039 BOARD, COMPLETE A-7112-393-A VC-341 BOARD, COMPLETE (SERVICE)
(TRV128/TRV228/TRV228E) (TRV128/TRV228)
A-7111-951-A SI-039 BOARD, COMPLETE A-7112-394-A VC-341 BOARD, COMPLETE (SERVICE)
(TRV328/TRV428/TRV428E) (TRV228E)
********************** A-7112-395-A VC-341 BOARD, COMPLETE (SERVICE)
(D753, D754, IC751, J751, J752 and J753 are not included in this complete (TRV328/TRV428)
board.) A-7112-396-A VC-341 BOARD, COMPLETE (SERVICE)
(TRV428E)
< CAPACITOR > ***********************
C758 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V < CAPACITOR >
C759 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C002 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
(TRV328/TRV428/TRV428E) C003 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
< CONNECTOR > C054 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
< DIODE > C057 1-164-942-11 CERAMIC CHIP 0.0068uF 10% 16V
D751 6-500-044-01 DIODE DF6A6.8FU (TE85R) C059 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
D753 8-719-060-65 DIODE DCC3810 (IR EMITTER)
D754 8-719-060-65 DIODE DCC3810 (IR EMITTER) C062 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V
D759 6-500-506-01 DIODE TLRMV1021 (T15SOY, F) (TALLY) C065 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
< FERRITE BEAD >
FB751 1-414-760-21 INDUCTOR, FERRITE BEAD C068 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
(TRV328/TRV428/TRV428E) C069 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
< IC > C071 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
IC751 6-704-975-01 IC RPM7240-V4 C072 1-127-772-81 CERAMIC CHIP 33000PF 10% 10V
(TRV228/TRV228E/TRV428/TRV428E) C073 1-165-875-11 CERAMIC CHIP 10uF 10% 10V
C075 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
< JACK > C076 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
J751 1-778-518-11 CONNECTOR, EXTERNAL (S VIDEO OUT)
J752 1-778-040-11 JACK, SMALL TYPE (A/V OUT) C079 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
J753 1-817-944-11 JACK, SMALL TYPE (RFU DC OUT) C080 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
< TRANSISTOR > C082 1-127-573-11 CERAMIC CHIP 1uF 10% 16V
Q751 8-729-023-22 TRANSISTOR 2SD2114K
< RESISTOR > C085 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
R752 1-216-806-11 METAL CHIP 56 5% 1/10W C087 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
R753 1-216-806-11 METAL CHIP 56 5% 1/10W C088 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
R761 1-216-864-11 SHORT CHIP 0
R763 1-216-821-11 METAL CHIP 1K 5% 1/10W C089 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
< SENSOR > C091 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C094 1-135-259-11 TANTAL. CHIP 10uF 20% 6.3V
SE751 1-476-807-41 SENSOR, ANGULAR VELOCITY (YAW) C095 1-115-566-11 CERAMIC CHIP 4.7uF 10% 10V
SE752 1-476-807-31 SENSOR, ANGULAR VELOCITY (PITCH) C096 1-119-749-11 TANTAL. CHIP 33uF 20% 4V
(TRV328/TRV428/TRV428E) C097 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V

C104 1-119-750-11 TANTAL. CHIP 22uF 20% 6.3V
5-16
VC-341
C106 1-117-720-11 CERAMIC CHIP 4.7uF 10V C307 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C109 1-164-505-11 CERAMIC CHIP 2.2uF 16V
C152 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C322 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C156 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C323 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C161 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C328 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C164 1-164-848-11 CERAMIC CHIP 8PF 0.5PF 50V C333 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C165 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C334 1-100-252-11 CERAMIC CHIP 0.1uF 10% 6.3V
C167 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C335 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C173 1-164-935-11 CERAMIC CHIP 470PF 10% 50V C408 1-100-249-11 CERAMIC CHIP 0.01uF 10% 16V
C177 1-104-847-11 TANTAL. CHIP 22uF 20% 4V C411 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C210 1-165-708-11 ELECT 47uF 20% 6.3V C427 1-164-941-11 CERAMIC CHIP 0.0047uF 10% 16V
C211 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V (TRV228E/TRV428E)
(TRV228E/TRV428E)
C252 1-117-720-11 CERAMIC CHIP 4.7uF 10V
C276 1-110-666-11 ELECT CHIP 22uF 20% 6.3V C434 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
(TRV328/TRV428/TRV428E) C435 1-125-838-11 CERAMIC CHIP 2.2uF 10% 6.3V
C278 1-110-666-11 ELECT CHIP 22uF 20% 6.3V C436 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
(TRV328/TRV428/TRV428E) C437 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
C281 1-100-252-11 CERAMIC CHIP 0.1uF 10% 6.3V C441 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
(TRV328/TRV428/TRV428E) C442 1-164-935-11 CERAMIC CHIP 470PF 10% 50V
C301 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C482 1-104-752-11 TANTAL. CHIP 33uF 20% 6.3V
5-17
VC-341
C487 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V C807 1-124-779-00 ELECT CHIP 10uF 20% 16V
C488 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V C808 1-124-778-00 ELECT CHIP 22uF 20% 6.3V
C490 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C811 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V
C495 1-164-874-11 CERAMIC CHIP 100PF 5% 50V C817 1-124-779-00 ELECT CHIP 10uF 20% 16V
C498 1-127-760-11 CERAMIC CHIP 4.7uF 10% 6.3V C820 1-126-602-11 ELECT CHIP 3.3uF 20% 50V
C500 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C821 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C841 1-124-779-00 ELECT CHIP 10uF 20% 16V
C616 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C844 1-164-870-11 CERAMIC CHIP 68PF 5% 50V
(TRV328/TRV428/TRV428E) C846 1-126-209-11 ELECT CHIP 100uF 20% 4V
C617 1-218-977-11 RES-CHIP 100K 5% 1/16W C847 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
(Note) (TRV128/TRV228/TRV228E) C848 1-126-209-11 ELECT CHIP 100uF 20% 4V
(TRV328/TRV428/TRV428E) C850 1-100-696-91 CERAMIC CHIP 1uF 10% 6.3V
C618 1-218-977-11 RES-CHIP 100K 5% 1/16W
(Note) (TRV128/TRV228/TRV228E) < CONNECTOR >
C620 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V CN002 1-794-998-31 PIN, CONNECTOR 20P
CN004 1-779-328-21 CONNECTOR, FFC/FPC 8P
C622 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V CN005 1-779-335-21 CONNECTOR, FFC/FPC 22P
C708 1-124-778-00 ELECT CHIP 22uF 20% 6.3V
C709 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V CN008 1-794-057-21 PIN, CONNECTOR (PC BOARD) 2P
C710 1-164-941-11 CERAMIC CHIP 0.0047uF 10% 16V CN053 1-573-806-21 PIN, CONNECTOR (1.5MM)(SMD) 6P
C711 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V CN151 1-779-331-11 FFC/CONNECTOR, FPC (LIF (NON-ZIF)) 14P
C712 1-164-856-81 CERAMIC CHIP 18PF 5% 50V CN201 1-750-360-21 CONNECTOR, FFC/FPC (ZIF) 24P
C714 1-164-856-81 CERAMIC CHIP 18PF 5% 50V * CN401 1-580-055-21 PIN, CONNECTOR (SMD) 2P
CN402 1-766-646-21 CONNECTOR, FFC/FPC 10P
C715 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V CN403 1-816-179-11 FFC/CONNECTOR, FPC (ZIF) 22P
C801 1-124-778-00 ELECT CHIP 22uF 20% 6.3V CN404 1-766-345-21 CONNECTOR, FFC/FPC 15P
C802 1-124-779-00 ELECT CHIP 10uF 20% 16V CN481 1-766-647-21 CONNECTOR, FFC/FPC 11P
C805 1-124-779-00 ELECT CHIP 10uF 20% 16V
Note: Resistors are mounted to the location

where C617, C618 are printed.
(TRV128/TRV228/TRV228E only)
5-18
VC-341
< DIODE > L055 1-416-669-11 INDUCTOR 22uH
D001 6-500-314-01 DIODE DAN222MT2L L056 1-416-669-11 INDUCTOR 22uH

D006 6-500-044-01 DIODE DF6A6.8FU (TE85R) L057 1-416-670-11 INDUCTOR 33uH
D007 6-500-044-01 DIODE DF6A6.8FU (TE85R) L058 1-469-524-91 INDUCTOR 4.7uH
D008 8-719-978-33 DIODE DTZ-TT11-6.8B L059 1-412-056-11 INDUCTOR 4.7uH
D009 6-500-776-01 DIODE MAZW068H0LS0 L060 1-469-524-91 INDUCTOR 4.7uH
D051 6-500-776-01 DIODE MAZW068H0LS0 L061 1-469-524-91 INDUCTOR 4.7uH

D052 8-719-074-08 DIODE MA4ZD03001S0 L062 1-469-524-91 INDUCTOR 4.7uH
D053 8-719-027-76 DIODE 1SS357-TPH3 L063 1-469-526-91 INDUCTOR 22uH
D054 6-500-314-01 DIODE DAN222MT2L L064 1-469-524-91 INDUCTOR 4.7uH
D055 8-719-074-08 DIODE MA4ZD03001S0 L065 1-469-526-91 INDUCTOR 22uH
D151 8-719-082-63 DIODE 1SV329 (TPL3) L066 1-410-389-31 INDUCTOR 47uH

D202 8-719-988-61 DIODE 1SS355TE-17 L151 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
D301 6-500-818-01 DIODE KV1870RTL-G L201 1-414-398-11 INDUCTOR 10uH
D302 6-500-818-01 DIODE KV1870RTL-G L202 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
D701 8-719-988-61 DIODE 1SS355TE-17 L271 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
< FUSE >
L301 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
0 F001 1-576-406-21 FUSE (1.4A/32V) L302 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
0 F004 1-576-406-21 FUSE (1.4A/32V) L308 1-412-985-31 INDUCTOR 3.3uH
< FERRITE BEAD > L481 1-414-406-41 INDUCTOR 220uH

L482 1-400-197-11 INDUCTOR 12uH
FB051 1-414-760-21 FERRITE, EMI (SMD) (1608) L483 1-469-526-91 INDUCTOR 22uH
FB151 1-414-760-21 FERRITE, EMI (SMD) (1608) L484 1-414-406-41 INDUCTOR 220uH
FB152 1-414-760-21 FERRITE, EMI (SMD) (1608) L801 1-400-588-11 INDUCTOR, LAMINATE CHIP 10uH
FB251 1-414-760-21 FERRITE, EMI (SMD) (1608)
FB252 1-414-760-21 FERRITE, EMI (SMD) (1608) < TRANSISTOR >
FB401 1-414-760-21 FERRITE, EMI (SMD) (1608) Q001 8-729-402-84 TRANSISTOR XN4601
FB481 1-414-228-11 INDUCTOR, FERRITE BEAD Q002 6-550-242-01 TRANSISTOR DTC114EMT2L
FB482 1-414-228-11 INDUCTOR, FERRITE BEAD Q051 6-550-237-01 TRANSISTOR 2SC5658T2LQ/R
FB601 1-414-760-21 FERRITE, EMI (SMD) (1608) Q052 6-550-404-01 TRANSISTOR UPA1858GR-9JG-E2-A
Q053 8-729-101-07 TRANSISTOR 2SB798-DL
< IC >
Q054 6-550-234-01 TRANSISTOR UNR32A300LS0
IC001 6-702-302-01 IC TK11133CSCL-G Q055 6-550-406-01 TRANSISTOR MCH3335-S-TL-E
IC051 6-705-264-01 IC MB44A120BPFV-G-BND-ERE1 Q056 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC151 8-752-417-70 IC CXD2444AR-T4 Q057 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC152 8-759-699-92 IC AD80013AJSTRL Q058 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC201 8-759-637-96 IC uPD16877MA-6A5-E2
Q059 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC202 8-759-681-42 IC NJM12902V (TE2) Q060 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC251 8-759-713-19 IC BH2222FV-E2 Q061 6-550-559-01 TRANSISTOR XN0NE9200LS0
IC271 8-759-489-19 IC uPC6756GR-8JG-E2 Q062 6-550-560-01 TRANSISTOR CPH5819-TL-E
(TRV328/TRV428/TRV428E) Q063 8-729-101-07 TRANSISTOR 2SB798-DL
IC301 8-759-677-85 IC MB87M1011PFF-G-BND
IC302 6-705-530-01 IC BU3097-03FV-E2 Q064 6-550-237-01 TRANSISTOR 2SC5658T2LQ/R
Q065 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R
IC401 6-705-676-01 IC TB6550FG (O, EB) Q066 6-550-237-01 TRANSISTOR 2SC5658T2LQ/R
IC481 8-752-093-69 IC CXA3265R-T4 Q067 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R
IC601 6-803-730-01 IC MB91194APFF-G-153-BNDE1 Q068 6-550-237-01 TRANSISTOR 2SC5658T2LQ/R
IC602 6-705-122-01 IC BR25C320FV-WE2
IC701 6-803-798-01 IC MB89097PFV-G-170-BND-ERE1 Q069 8-729-053-52 TRANSISTOR HN1C01FE-Y/GR (TPLR3)
Q070 8-729-053-52 TRANSISTOR HN1C01FE-Y/GR (TPLR3)
IC801 6-704-790-01 IC AN12985A-VB Q071 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R
Q072 8-729-053-52 TRANSISTOR HN1C01FE-Y/GR (TPLR3)
< COIL > Q073 8-729-053-54 TRANSISTOR HN1A01FE-Y/GR (TPLR3)
L051 1-416-670-11 INDUCTOR 33uH Q074 8-729-053-54 TRANSISTOR HN1A01FE-Y/GR (TPLR3)

L052 1-416-669-11 INDUCTOR 22uH Q075 6-550-234-01 TRANSISTOR UNR32A300LS0
L053 1-416-669-11 INDUCTOR 22uH Q201 6-550-758-01 TRANSISTOR DTC113TMT2L
L054 1-416-670-11 INDUCTOR 33uH Q202 8-729-054-51 TRANSISTOR UP04116008S0

5-19 ber specified. portant le numéro spécifié.
VC-341
Q203 6-550-237-01 TRANSISTOR 2SC5658T2LQ/R R082 1-216-789-11 METAL CHIP 2.2 5% 1/10W
Q302 6-550-383-01 TRANSISTOR HN4A71FK (TE85R) R083 1-218-949-11 RES-CHIP 470 5% 1/16W
Q304 8-729-054-48 TRANSISTOR UP04601008S0 R085 1-218-977-11 RES-CHIP 100K 5% 1/16W
Q306 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R R086 1-218-973-11 RES-CHIP 47K 5% 1/16W
Q401 6-550-283-01 TRANSISTOR UNR32A600LS0 R087 1-218-977-11 RES-CHIP 100K 5% 1/16W
Q481 8-729-047-19 TRANSISTOR 2SA1965-S-TL R089 1-218-977-11 RES-CHIP 100K 5% 1/16W
Q482 6-550-232-01 TRANSISTOR 2SA2029T2LQ/R R090 1-218-977-11 RES-CHIP 100K 5% 1/16W

Q483 8-729-054-48 TRANSISTOR UP04601008S0 R091 1-218-969-11 RES-CHIP 22K 5% 1/16W
Q484 6-550-234-01 TRANSISTOR UNR32A300LS0 R092 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
Q485 6-550-240-01 TRANSISTOR DTA114TMT2L R093 1-218-969-11 RES-CHIP 22K 5% 1/16W
Q701 8-729-041-43 TRANSISTOR HN1L02FU (TE85R) R094 1-218-969-11 RES-CHIP 22K 5% 1/16W
< RESISTOR > R095 1-218-977-11 RES-CHIP 100K 5% 1/16W

R096 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
R001 1-218-949-11 RES-CHIP 470 5% 1/16W R097 1-208-715-11 METAL CHIP 22K 0.5% 1/16W
R002 1-218-957-11 RES-CHIP 2.2K 5% 1/16W R098 1-218-963-11 RES-CHIP 6.8K 5% 1/16W
R004 1-211-977-11 METAL CHIP 22 0.5% 1/10W R099 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
R005 1-218-969-11 RES-CHIP 22K 5% 1/16W
(TRV228E) R100 1-208-707-11 METAL CHIP 10K 0.5% 1/16W
R005 1-218-974-11 RES-CHIP 56K 5% 1/16W R101 1-208-943-11 METAL CHIP 220K 0.5% 1/16W
(TRV428E) R102 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
R103 1-208-721-11 METAL CHIP 39K 0.5% 1/16W
R005 1-218-977-11 RES-CHIP 100K 5% 1/16W R104 1-208-908-11 METAL CHIP 7.5K 0.5% 1/16W
(TRV128/TRV228)
(TRV328/TRV428) R106 1-208-927-11 METAL CHIP 47K 0.5% 1/16W
R006 1-218-973-11 RES-CHIP 47K 5% 1/16W R107 1-218-964-11 RES-CHIP 8.2K 5% 1/16W
(TRV128/TRV228) R109 1-218-990-11 SHORT CHIP 0
(TRV428E)
(TRV228E) R114 1-216-295-91 SHORT CHIP 0
R116 1-216-295-91 SHORT CHIP 0
R007 1-208-683-11 METAL CHIP 1K 0.5% 1/16W R152 1-216-864-11 SHORT CHIP 0
R010 1-208-707-11 METAL CHIP 10K 0.5% 1/16W R155 1-218-977-11 RES-CHIP 100K 5% 1/16W
R011 1-218-953-11 RES-CHIP 1K 5% 1/16W
R014 1-218-940-11 RES-CHIP 82 5% 1/16W R162 1-218-989-11 RES-CHIP 1M 5% 1/16W
R018 1-218-943-11 RES-CHIP 150 5% 1/16W R163 1-218-990-11 SHORT CHIP 0
R164 1-218-985-11 RES-CHIP 470K 5% 1/16W
R021 1-218-943-11 RES-CHIP 150 5% 1/16W R203 1-208-635-11 METAL CHIP 10 0.5% 1/16W
R022 1-218-953-11 RES-CHIP 1K 5% 1/16W R204 1-218-989-11 RES-CHIP 1M 5% 1/16W
R051 1-218-953-11 RES-CHIP 1K 5% 1/16W
R053 1-218-977-11 RES-CHIP 100K 5% 1/16W R206 1-218-965-11 RES-CHIP 10K 5% 1/16W
R207 1-218-981-11 RES-CHIP 220K 5% 1/16W
R054 1-218-957-11 RES-CHIP 2.2K 5% 1/16W R208 1-218-985-11 RES-CHIP 470K 5% 1/16W
R062 1-218-989-11 RES-CHIP 1M 5% 1/16W
R064 1-216-797-11 METAL CHIP 10 5% 1/10W R211 1-218-963-11 RES-CHIP 6.8K 5% 1/16W
R212 1-218-985-11 RES-CHIP 470K 5% 1/16W
R065 1-218-961-11 RES-CHIP 4.7K 5% 1/16W R213 1-218-947-11 RES-CHIP 330 5% 1/16W
R067 1-218-954-11 RES-CHIP 1.2K 5% 1/16W
R271 1-218-989-11 RES-CHIP 1M 5% 1/16W
R070 1-218-971-11 RES-CHIP 33K 5% 1/16W (TRV328/TRV428/TRV428E)
R074 1-208-709-11 METAL CHIP 12K 0.5% 1/16W (TRV328/TRV428/TRV428E)

R076 1-218-990-11 SHORT CHIP 0 (TRV328/TRV428/TRV428E)
R078 1-208-715-11 METAL CHIP 22K 0.5% 1/16W R303 1-218-954-11 RES-CHIP 1.2K 5% 1/16W
5-20
VC-341
R306 1-218-949-11 RES-CHIP 470 5% 1/16W R484 1-218-970-11 RES-CHIP 27K 5% 1/16W
R307 1-218-962-11 RES-CHIP 5.6K 5% 1/16W
R487 1-218-970-11 RES-CHIP 27K 5% 1/16W
R308 1-218-953-11 RES-CHIP 1K 5% 1/16W R488 1-218-945-11 RES-CHIP 220 5% 1/16W
R311 1-218-941-81 RES-CHIP 100 5% 1/16W R491 1-218-945-11 RES-CHIP 220 5% 1/16W
R314 1-218-967-11 RES-CHIP 15K 5% 1/16W
R492 1-218-971-11 RES-CHIP 33K 5% 1/16W
R315 1-218-952-11 RES-CHIP 820 5% 1/16W R493 1-218-958-11 RES-CHIP 2.7K 5% 1/16W
R317 1-218-949-11 RES-CHIP 470 5% 1/16W R495 1-208-939-11 METAL CHIP 150K 0.5% 1/16W
R318 1-218-945-11 RES-CHIP 220 5% 1/16W R601 1-218-941-81 RES-CHIP 100 5% 1/16W
R319 1-218-962-11 RES-CHIP 5.6K 5% 1/16W
R602 1-218-965-11 RES-CHIP 10K 5% 1/16W
R324 1-218-966-11 RES-CHIP 12K 5% 1/16W
R707 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
R325 1-218-946-11 RES-CHIP 270 5% 1/16W R708 1-218-989-11 RES-CHIP 1M 5% 1/16W
R327 1-218-966-11 RES-CHIP 12K 5% 1/16W R709 1-219-570-11 METAL CHIP 10M 5% 1/10W
R331 1-218-989-11 RES-CHIP 1M 5% 1/16W
R712 1-218-965-11 RES-CHIP 10K 5% 1/16W
R332 1-218-967-11 RES-CHIP 15K 5% 1/16W R713 1-218-990-11 SHORT CHIP 0
R336 1-218-965-11 RES-CHIP 10K 5% 1/16W
R717 1-218-949-11 RES-CHIP 470 5% 1/16W
R403 1-218-949-11 RES-CHIP 470 5% 1/16W
R811 1-218-973-11 RES-CHIP 47K 5% 1/16W
R404 1-218-946-11 RES-CHIP 270 5% 1/16W R812 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
R405 1-218-990-11 SHORT CHIP 0 R815 1-218-979-11 RES-CHIP 150K 5% 1/16W
R409 1-216-808-11 METAL CHIP 82 5% 1/10W R817 1-218-985-11 RES-CHIP 470K 5% 1/16W
R410 1-216-789-11 METAL CHIP 2.2 5% 1/10W R818 1-218-990-11 SHORT CHIP 0
R411 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R819 1-218-952-11 RES-CHIP 820 5% 1/16W
R412 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R413 1-218-965-11 RES-CHIP 10K 5% 1/16W < COMPOSITION CIRCUIT BLOCK >
(TRV228E/TRV428E)
R413 1-218-990-11 SHORT CHIP 0 RB201 1-234-375-21 RES, NETWORK 1K x 4 (1005)
(TRV128/TRV228/TRV328/TRV428) RB202 1-234-379-21 RES, NETWORK 22K x 4 (1005)
R414 1-218-967-11 RES-CHIP 15K 5% 1/16W RB203 1-234-380-21 RES, NETWORK 47K x 4 (1005)
(TRV128/TRV228/TRV328/TRV428) RB271 1-234-379-21 RES, NETWORK 22K x 4 (1005)
(TRV228E/TRV428E) RB301 1-234-378-21 RES, NETWORK 10K x 4 (1005)
R424 1-218-965-11 RES-CHIP 10K 5% 1/16W RB302 1-234-376-21 RES, NETWORK 2.2K x 4 (1005)
(TRV228E/TRV428E) RB482 1-234-383-21 RES, NETWORK 470K x 4 (1005)
R427 1-218-990-11 SHORT CHIP 0 RB483 1-234-376-21 RES, NETWORK 2.2K x 4 (1005)
R431 1-216-864-11 SHORT CHIP 0 RB601 1-234-381-21 RES, NETWORK 100K x 4 (1005)
RB605 1-234-375-21 RES, NETWORK 1K x 4 (1005)
R481 1-218-936-11 RES-CHIP 39 5% 1/16W RB606 1-234-378-21 RES, NETWORK 10K x 4 (1005)
(TRV228E/TRV428E) RB608 1-234-384-11 RES, NETWORK 1M x 4 (1005)
R481 1-218-938-11 RES-CHIP 56 5% 1/16W RB610 1-234-377-21 RES, NETWORK 4.7K x 4 (1005)
(TRV128/TRV228/TRV328/TRV428) (TRV328/TRV428/TRV428E)
R482 1-218-950-11 RES-CHIP 560 5% 1/16W
R483 1-218-941-81 RES-CHIP 100 5% 1/16W RB611 1-234-381-21 RES, NETWORK 100K x 4 (1005)
5-21
VC-341
RB612 1-234-380-21 RES, NETWORK 47K x 4 (1005)
RB613 1-234-377-21 RES, NETWORK 4.7K x 4 (1005)
RB701 1-234-383-21 RES, NETWORK 470K x 4 (1005)
RB703 1-234-375-21 RES, NETWORK 1K x 4 (1005)
RB704 1-234-375-21 RES, NETWORK 1K x 4 (1005)

RB705 1-234-375-21 RES, NETWORK 1K x 4 (1005)
RB706 1-234-375-21 RES, NETWORK 1K x 4 (1005)
RB708 1-234-381-21 RES, NETWORK 100K x 4 (1005)
RB801 1-234-702-11 RES, NETWORK 68 x 4 (1005)
< VIBRATOR >
X151 1-760-320-11 VIBRATOR, CRYSTAL (28.636363MHZ)

X151 1-760-321-11 VIBRATOR, CRYSTAL (28.375MHz)
(TRV228E/TRV428E)
X601 1-760-655-41 VIBRATOR, CRYSTAL (20MHz)
X701 1-795-244-11 VIBRATOR, CERAMIC (10MHz)
X702 1-760-458-21 VIBRATOR, CRYSTAL (32.768kHz)
5-22
Checking supplied accessories.
Lens cap (1)

X-3952-971-1
Power cord (1)
0 1-690-827-12 (AEP, NE, EE)
0 1-696-819-21 (AUS)
0 1-769-608-11 (E)
AC-L15A/L15B AC Adaptor (1) 0 1-775-843-52 (UK)
0 1-477-533-32 (Middle East area) 0 1-783-374-11 (HK) Cap string (1)
0 1-477-533-51 0 1-783-952-21 (AR) 3-979-194-12
(EXCEPT Middle East area, BR) 0 1-790-542-12 (US, CND)
0 1-827-160-11 (JE)
Rechargeable battery pack A/V connecting cable (1)

Shoulder strap (1) NP-FM30 (1) 1-783-738-91 (AEP, UK, NE, EE)
3-987-015-01 0 A-7096-387-A (US, CND) 1-824-009-31
0 A-7096-388-B (EXCEPT AEP, UK, NE, EE)
(EXCEPT US, CND)
Other accessories
3-087-918-11 MANUAL, INSTRUCTION (ENGLISH)
(TRV128: US, CND, E/TRV228/TRV328/TRV428)
3-087-918-21 MANUAL, INSTRUCTION (FRENCH)
(TRV128: CND/TRV328: CND)
3-087-918-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE)
Battery Holder
3-083-973-01 (TRV128: E, MX/TRV228/TRV328: E/TRV428)
3-087-918-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
Wireless Remote Commander (TRV228)
RMT-833 (1)
3-087-918-51 MANUAL, INSTRUCTION (KOREA) (TRV428)
1-477-898-11 (EXCEPT TRV128/
3-087-918-61 MANUAL, INSTRUCTION (ARABIC) (TRV228)
TRV228E: E1/TRV328/TRV428E: E1)
3-087-919-11 MANUAL, INSTRUCTION (ENGLISH)
1-477-898-31
(TRV228E: E2/TRV428E: E2) (TRV228E: AEP, UK, E/TRV428E: AEP, E, AUS, HK, JE)
3-087-919-21 MANUAL, INSTRUCTION (FRENCH)
(Note) E1: No indication of country of origin. (TRV228E: AEP, E/TRV428E: AEP, E, JE)
E2: There is indication of country of origin. 3-087-919-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE)
(TRV228E: AEP/TRV428E: AEP)
3-087-919-41 MANUAL, INSTRUCTION (ITALIAN, GREEK)
3-087-919-51 MANUAL, INSTRUCTION (GERMAN, DUTCH)
3-087-919-61 MANUAL, INSTRUCTION (SWEDISH, RUSSIAN)
(TRV228E: NE/TRV428E: NE, JE)
3-087-919-71 MANUAL, INSTRUCTION (DANISH, FINNISH)
21-pin adaptor (1) (TRV228E: NE/TRV428E: NE)
1-770-783-21 (AEP, UK, NE, EE) 3-087-919-81 MANUAL, INSTRUCTION (POLISH, CZECH)
(TRV228E: EE/TRV428E: EE)
3-087-919-91 MANUAL, INSTRUCTION (HUNGALIAN, SLOVAK)
(TRV228E: EE/TRV428E: EE)
3-087-920-11 MANUAL, INSTRUCTION (ARABIC, PERSIAN)
(TRV228E: E/TRV428E: E)
3-087-920-21 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(TRV428E: HK)
Conversion 2P adaptor (1) Conversion 2P adaptor (1) 3-087-920-31 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
0 1-569-008-12 (E, HK) 0 1-569-007-12 (JE) (TRV228E: E/TRV428E: E, JE)

ber specified. portant le numéro spécifié.
5-23E
RMT-833
Ver 1.0 2003. 11 SECTION 6 ADJ

Revision History ADJUSTMENTS
Link
Before starting adjustments VIDEO SECTION ADJUSTMENTS
Adjusting items when replacing main parts and boards PREPARATIONS BEFORE ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENTS

CAMERA SECTION ADJUSTMENTS
SERVO SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
INITIALIZATION OF 8, A, C, D, E, F, 1F PAGE DATA
AUDIO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS SERVICE MODE

ADJUSTMENT REMOTE COMMANDER
MECHANISM SECTION ADJUSTMENTS
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER
SERVICE MODE
OPERATING WITHOUT CASSETTE
TAPE PATH ADJUSTMENT
2003K0500-1
9-876-290-51 Sony EMCS Co. Published by DI CS Strategy Div

TABLE OF CONTENTS
Section Title Page Section Title Page
6. ADJUSTMENTS 3. S VIDEO OUT Y Level Adjustment
1. Before Starting Adjustments ··········································· 6-1 (VC-341 Board) ····························································· 6-32
1-1. Adjusting Items when Replacing 4. S VIDEO OUT C Level Adjustment
Main Parts and Boards ···················································· 6-2 (VC-341 Board) ····························································· 6-32
6-1. Camera Section Adjustments ··········································· 6-4 5. VIDEO OUT Level Check (VC-341 Board) ················· 6-33
1-1. Preparations before Adjustments (CAMERA Section) ··· 6-4 6. REC Y Current Adjustment (VC-341 Board) ················ 6-34
1-1-1. List of Service Tools ························································ 6-4 7. REC C/AFM Current Adjustment ································· 6-35
1-1-2. Preparations ····································································· 6-5 7-1. Preparations ··································································· 6-35
1-1-3. Precaution ········································································ 6-6 7-2. REC C Current Check (VC-341 Board) ························ 6-35
1. Setting the Switch ···························································· 6-6 7-3. REC AFM Current Adjustment (VC-341 Board) ·········· 6-36
2. Order of Adjustments ······················································ 6-6 7-4. Processing after Completed Adjustment ······················· 6-36
3. Subjects ··········································································· 6-6 3-5. Audio System Adjustments ··········································· 6-37
1-2. Initialization of 8, A, C, D, E, F, 1F Page Data ··············· 6-7 1. BPF f0 Adjustment (VC-341 Board) ······························ 6-37
1. Initializing the 8, A, C, D, E, F, 1F Page Data ················ 6-7 2. 1.5 MHz Deviation Adjustment (VC-341 Board) ········· 6-37
2. Modification of 8, A, C, D, E, F, 1F Page Data ··············· 6-7 6-4. Service Mode ································································· 6-38
3. 8 Page Table ····································································· 6-7 4-1. Adjustment Remote Commander ·································· 6-38
4. A Page Table ···································································· 6-8 1. Using the Adjustment Remote Commander ·················· 6-38
5. C Page Table ···································································· 6-9 2. Precautions Upon Using the Adjustment
6. D Page Table ···································································· 6-9 Remote Commander ······················································ 6-38
7. E Page Table ·································································· 6-10 4-2. Data Process ·································································· 6-39
8. F Page Table ·································································· 6-11 4-3. Service Mode ································································· 6-40
9. 1F Page Table ································································ 6-11 1. Setting the Test Mode ···················································· 6-40
1-3. Camera System Adjustments ········································· 6-12 2. Emergency Memory Address ········································ 6-41
1. Hall Adjustment ····························································· 6-12 2-1. EMG Code (Emergency Code) ····································· 6-41
2. Flange Back Adjustment 2-2. MSW Codes ·································································· 6-42
(Using the Minipattern Box) ········································· 6-13 3. Bit Value Discrimination ··············································· 6-43
3. Flange Back Adjustment 4. Switch Check (1) ··························································· 6-43
(Using the Flange Back Adjustment Chart 5. Switch Check (2) ··························································· 6-43
and Subject More than 500 m Away) ···························· 6-14 6. Switch Check (3) ··························································· 6-44
4. Flange Back Check ························································ 6-15 7. LED, Video Light, IR Light Check ······························· 6-44
5. Optical Axis Adjustment ··············································· 6-16 8. Record of Use Check ····················································· 6-45
6. Picture Frame Setting ···················································· 6-17 9. Record of Self-diagnosis Check ···································· 6-46
7. Color Reproduction Adjustment ···································· 6-18
8. LV Standard Data Input ················································· 6-19 * The camera optical axis frame is shown on page 6-47.
9. Auto White Balance Standard Data Input ····················· 6-19 The camera color reproduction frame is shown on page
10. Auto White Balance Adjustment ··································· 6-20 6-48.
11. Auto White Balance Check ··········································· 6-21
12. Angular Velocity Sensor Output Check and Steadyshot
Check (CCD-TRV328/TRV428/TRV428E) ·················· 6-22
13. CCD Defect Check ························································ 6-22
1-4. LCD System Adjustments ············································· 6-23
1. LCD Level Adjustment (PD-204 Board) ······················· 6-23
2. LCD V-COM Adjustment (PD-204 Board) ··················· 6-24
3. LCD White Balance Adjustment (PD-204 Board) ········ 6-24
6-2. Mechanism Section Adjustments ·································· 6-25
2-1. Adjustment Remote Commander ·································· 6-25
2-2. Operating Without Cassette ··········································· 6-25
2-3. Tape Path Adjustment ···················································· 6-25
6-3. Video Section Adjustments ··········································· 6-26
3-1. Preparations before Adjustments ··································· 6-26
3-1-1. Equipment to Required ·················································· 6-26
3-1-2. Precautions on Adjusting ··············································· 6-27
3-1-3. Adjusting Connectors ···················································· 6-27
3-1-4. Connecting the Equipment ············································ 6-27
3-1-5. Alignment Tapes ···························································· 6-28
3-1-6. Output Level and Impedance ········································· 6-29
3-1-7. Recording Mode (Standard 8/Hi8) Switching ··············· 6-29
3-2. System Control System Adjustments ···························· 6-30
1. Initialization of 8, A, C, D, E, F, 1F Page Data ············· 6-30
3-3. Servo System Adjustments ············································ 6-30
1. CAP FG Offset Adjustment (VC-341 Board) ··············· 6-30
2. Switching Position Adjustment (VC-341 Board) ·········· 6-30
3-4. Video System Adjustments ············································ 6-31
1. 28 MHz Origin Oscillation Adjustment
(VC-341 Board) ····························································· 6-31
2. AFC f0 Adjustment (VC-341 Board) ····························· 6-31
—2—
SECTION 6
ADJUSTMENTS
1. Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board

The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
(Machine before starting repair) PC PC (Machine after a board is replaced)
Save the EVR data Download the saved

to a personal computer. data to a machine.
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
Remove the EEPROM and install it.
(Former board) (New board)
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
(Machine to be repaired) (Machine to be repaired)
PC
Download the data.
Save the data.
(The same model of the same destination)
After the EVR data is saved and downloaded, check the

respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
6-1
1-1. Adjusting items when replacing main parts and boards

• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Replaced part
Block replacement Mounted part replacement
(Camera/VTR process, Lens control)

(YAW, PITCH sensor) (Note 3)
(Drum assembly) (Note 1)
(S/H, AGC, A/D CONV.)
(Audio/Video process)
(Timing generator)
(Fluorescent tube)
(REC/PB AMP)
(Capstan motor)
(CCD imager)
(LCD driver)
(LCD panel)
(EVR)
Adjustment Section Adjustment
VC-341 board IC151, X151

Mechanism deck (Note 1)
SI-039 board SE751/752

Mechanism deck M901
Mechanism deck M902
PD-204 board IC6001

CD-465 board IC951
VC-341 board IC152

VC-341 board IC301
VC-341 board IC481
VC-341 board IC251
VC-341 board IC801
LCD block LCD901
Video light (Note 2)
LCD block ND901

Lens device
Initialization of 8, A, C, D, Initializing of 8, A, C, D, E, F, 1F page

E, F, 1F page data data
Camera HALL adj. z
Flange back adj. z z
Optical axis adj. z z
Color reproduction adj. z z
LV standard data input z z
AWB standard data input z z
Auto white balance adj. z z
Angular velocity sensor output check
z
and steadyshot check (Note 3)
LCD LCD level adj. z
LCD V-COM adj. z z
LCD White balance adj. z z z
Servo CAP FG offset adj. z z
Switching position adj. z z
Video 28 MHz origin osillation adj. z z
AFC f0 adj. z
S VIDEO OUT Y level adj. z z
S VIDEO OUT C level adj. z z
REC Y current adj. z z
REC C/AFM current adj. z z
Audio BPF f0 adj. z
1.5 MHz deviation adj. z
Mechanism Tape path adj. z z z
Table 6-1-1 (1)
Note 1: When replacing the drum assy or mechanism deck, reset the data of page: 7, address: A4 to A6.
(Refer to “Record of Use Check” of “6-4. SERVICE MODE”)
Note 2: When replacing the video light, reset the data of page: 7, address: CE and CF.
(Refer to “Record of Use Check” of “6-4. SERVICE MODE”)
Note 3: CCD-TRV328/TRV428/TRV428E only
6-2
• Adjusting items when replacing a board or EEPROM

When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Replaced part
(COMPLETE)
(COMPLETE)
(EEPROM)
Adjustment Section Adjustment
Supporting RadarW
VC-341 board IC602
VC-341 board
PD-204 board
Initialization of 8, A, C, D, Initializing of 8, A, C, D, E, F, 1F page

z z
E, F, 1F page data data
Camera HALL adj. z z z
Flange back adj. z z z
Optical axis adj. z z
Color reproduction adj. z z
LV standard data input z z z
AWB standard data input z z
Auto white balance adj. z z z
Angular velocity sensor output check
z z z
and steadyshot check (Note 3)
LCD LCD level adj. z z z z
LCD V-COM adj. z z z
LCD White balance adj. z z z
Servo CAP FG offset adj. z z z
Switching position adj. z z
Video 28 MHz origin osillation adj. z z
AFC f0 adj. z z z
S VIDEO OUT Y level adj. z z
S VIDEO OUT C level adj. z z
REC Y current adj. z z
REC C/AFM current adj. z z
Audio BPF f0 adj. z z
1.5 MHz deviation adj. z z
Mechanism Tape path adj.
Table 6-1-1 (2)
6-3
6-1. CAMERA SECTION ADJUSTMENTS
1-1. PREPARATIONS BEFORE ADJUSTMENTS (CAMERA SECTION)
1-1-1. List of Service Tools

• Oscilloscope • Color monitor • Vectorscope
• Regulated power supply • Digital voltmeter • Frequency counter
Ref. No. Name Parts Code Usage
Auto white balance adjustment/check
J-1 Filter for color temperature correction (C14) J-6080-058-A
White balance adjustment/check
ND filter 1.0 J-6080-808-A White balance check
J-2 ND filter 0.4 J-6080-806-A White balance check
ND filter 0.1 J-6080-807-A White balance check
J-3 Pattern box PTB-450 J-6082-200-A
J-4 Color chart for pattern box J-6020-250-A
Adjustment remote commander (RM-95 upgraded).
J-5 J-6082-053-B
(Note)
J-6 Siemens star chart J-6080-875-A For checking the flange back
J-7 Clear chart for pattern box J-6080-621-A
J-8 CPC jig connector J-6082-539-A For connecting the adjustment remote commander
J-9 I/F unit for LANC control J-6082-521-A For connecting the adjustment remote commander
J-10 Mini pattern box J-6082-353-B For adjusting the flange back
J-11 Camera table J-6082-384-A For adjusting the flange back
J-1 J-2 J-3 J-4 J-5
J-6 J-7 J-8 J-9 J-10
J-11
Fig. 6-1-1
6-4
1-1-2. Preparations
Pattern box
Note: Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.
1) Connect the equipment for adjustments according to Fig. 6-1-

3. 1m
2) Connect the adjustment remote commander to VC-341 board
CN007 via I/F unit for LANC control (J-6082-521-A) and CPC
jig connector (J-6082-539-A). (Fig. 6-1-3)
To operate the adjustment remote commander, connect the AC
power adaptor to the DC IN jack of I/F unit for LANC control,
or connect the L series Info-LITHIUM battery to the battery Front of the lens
terminal of I/F unit for LANC control.
Fig. 6-1-2
CN007
1
16
A/V OUT jack
CPC lid
Screw (M2)
Audio (black)
TV monitor Vector scope
L serices Info
LITHIUM battery (7.2Vdc) Terminated at 75Ω
Video (yellow)
AC adaptor AC IN
AC adaptor AC IN
Conductor side
LANC jack

(J-6082-521-A)
Fig. 6-1-3
6-5
1-1-3. Precaution
1. Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.
1. POWER switch (SS-5100 block) .......................... CAMERA 7. P EFFECT (MENU setting) ........................................... OFF
2. FOCUS (CF-5100 block) ..................................... MANUAL 8. D ZOOM (MENU setting) ............................................. OFF
3. BACK LIGHT (CF-5100 block) .................................... OFF 9. DEMO MODE (MENU setting) .................................... OFF
4. PROGRAM AE (MENU setting) ................................ AUTO 10. 16 : 9 WIDE (MENU setting) ........................................ OFF
5. NIGHTSHOT PLUS switch (Lens block) ..................... OFF 11. DISPLAY (MENU setting) ............................................ LCD
6. EXPOSURE (CF-5100 block) .................................... AUTO
2. Order of Adjustments
Basically carry out adjustments in the order given.
Color bar chart (Color reproduction adjustment frame)

Electronic beam scanning frame
H
Yellow
Magenta
White
Cyan
Green
C C=D D
Red
Blue
Magenta
Yellow
Green
White
Cyan
Blue
Red
CRT picture frame
V
A B A=B B A
Fig. b (monitor TV picture)
Fig. a Enlargement
(VIDEO terminal of A/V jack
output waveform)
Difference in level
Adjust the camera zoom and direction to

obtain the output waveform shown in Fig. a and
B A the monitor TV display shown in Fig. b.
Fig. 6-1-4
3. Subjects
1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
2) Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time) White
3) Chart for flange back adjustment 841 mm
Join together a piece of white A0 size paper (1189mm × 841
Black
mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.
Note: Use a non-reflecting and non-glazing vellum paper. The

1189 mm
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
Fig. 6-1-5
6-6
1-2. INITIALIZATION OF 8, A, C, D, E, F, 1F 2. Modification of 8, A, C, D, E, F, 1F Page Data

PAGE DATA If the 8, A, C, D, E, F, 1F page data has been initialized, change
Note: If reading/writing data on pages 1F, set data: 01 to page: 0, the data of the “Fixed data-2” address shown in the following table
address: 10, and then select pages F. By this data setting, by manual input.
the pages 1F can be selected.
After the data reading/writing finished, return the data on Modifying method:
page: 0, address: 10 to “00”. 1) Before changing the data, select page: 0, address: 01, and set
data: 01.
1. Initializing the 8, A, C, D, E, F, 1F Page Data 2) New data for changing are not shown in the tables because
Note 1: If “Initialization of Pages 8, A, C, D, E, F, 1F” is ex- they are different in destination. When changing the data, copy
ecuted, all data on pages 8, A, C, D, E, F, 1F are initial- the data built in the same model.
ized. (Only an individual page cannot be initialized) Note: If copy the data built in the different model, the
Note 2: If the 8, A, C, D, E, F, 1F page data has been initialized, camcorder may not operate.
“Modification of 8, A, C, D, E, F, 1F Page Data” and all 3) When changing the data, press the PAUSE button of the ad-
adjustments need to be performed again. justment remote commander each time when setting new data
Note 3: Check that the data of page: 0, address: 10 is “00”. to write the data in the non-volatile memory.
Note 4: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428 4) Check that the data of adjustment addresses is the initial value.
PAL model: CCD-TRV228E/TRV428E If not, change the data to the initial value.
Adjusting Page 8 Processing after Completing Modification of 8, A, C, D, E, F, 1F

Page data
Adjusting Address 00 to FF
Adjusting Page A Order Page Address Data Procedure
Adjusting Address 10 to FF 1 2 00 29
Adjusting Page C 2 2 01 29 Press PAUSE button.
Adjusting Address 10 to FF Note: If the following symptoms occur after completing of the
“Modification of 8, A, C, D, E, F, 1F page data”, check
Adjusting Page D that the data of the “Fixed data-2” addresses of 8, A, C, D,
Adjusting Address 10 to 7F E, F, 1F page are same as those of the same model of the
Adjusting Page E same destination.
1) The power is shut off so that unit cannot operate.
Adjusting Address 00 to FF
Adjusting Page F
Adjusting Address 10 to FF 3. 8 Page table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Adjusting Page 1F
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
Adjusting Address 00 to FF the 8, A, C, D, E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
Initializing method: of 8, A, C, D, E, F, 1F Page Data”)
Order Page Address Data Procedure Initial value

Address Remark
1 0 01 01 NTSC PAL
Set the following data. 00 to FF Fixed data-1 (Initialized data)
2 7 03 00: NTSC model
80: PAL model
Set the following data.
3 7 00 2D: NTSC model
2F: PAL model
Set the following data, and
press PAUSE button.
4 7 01
2D: NTSC model
2F: PAL model
Check the data changes to
5 7 02
“01”.
6 2 00 29
7 2 01 29 Press PAUSE button.
Perform “Modification of 8,
8
A, C, D, E, F, 1F Page Data”
6-7
4. A Page table Initial value

Note 1: Check that the data of page: 0, address: 10 is “00”. Address Remark
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing NTSC PAL
the 8, A, C, D, E, F, 1F Page Data”) E9
Fixed data-2: Modified data. (Refer to “2. Modification EA
of 8, A, C, D, E, F, 1F Page Data”)
EB
Initial value EC
Address Remark
NTSC PAL ED
10 to 20 Fixed data-1 (Initialized data) EE
21 Fixed data-2 EF
22 to 2B Fixed data-1 (Initialized data) F0
2C Fixed data-2 F1
2D to 30 Fixed data-1 (Initialized data) F2
31 Fixed data-2 F3 Fixed data-2
32 to 40 Fixed data-1 (Initialized data) F4
41 Fixed data-2 F5
42 to 44 Fixed data-1 (Initialized data) F6
45 Fixed data-2 F7
46 to 4B Fixed data-1 (Initialized data) F8
4C Fixed data-2 F9
4D Fixed data-1 (Initialized data) FA
4E FB
Fixed data-2
4F FC
50, 51 Fixed data-1 (Initialized data) FD
52 FE, FF Fixed data-1 (Initialized data)
Fixed data-2
53
54 to 64 Fixed data-1 (Initialized data)
65 Fixed data-2
66 to 7F Fixed data-1 (Initialized data)
80
Fixed data-2
81
90 Fixed data-2
96
97 Fixed data-2
98
99 to 9C Fixed data-1 (Initialized data)
9D
9E
Fixed data-2
9F
A0
A1 to DF Fixed data-1 (Initialized data)
E0
E1
E2
E3
E4 Fixed data-2
E5
E6
E7
E8
6-8
5. C Page table 6. D Page Table

Note 1: Check that the data of page: 0, address: 10 is “00”. Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, A, C, D, E, F, 1F Page Data”) the 8, A, C, D, E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification Fixed data-2: Modified data. (Refer to “2. Modification
of 8, A, C, D, E, F, 1F Page Data”) of 8, A, C, D, E, F, 1F Page Data”)
Initial value Initial value
Address Remark Address Remark
NTSC PAL NTSC PAL
10 to 13 Fixed data-1 (Initialized data) 10 00 00 Test mode
14 00 00 Test mode 11 Fixed data-1 (Initialized data)
15 Fixed data-1 (Initialized data) 12
Fixed data-2
16 0B 0A 13
Switching position adj.
17 00 00 14 to 21 Fixed data-1 (Initialized data)
18 83 83 CAP FG offset adj. 22
19 30 30 AFC f0 adj. 23
1A 68 62 S VIDEO OUT Y level adj. 24 Fixed data-2
1B 62 62 S VIDEO OUT C level adj. 25
1C, 1D Fixed data-1 (Initialized data) 26
1E B4 D7 27 to 29 Fixed data-1 (Initialized data)
REC Y current adj.
1F B4 D7 2A
Fixed data-2
20 to 24 Fixed data-1 (Initialized data) 2B
25 A0 A0 REC C/AFM current adj. 2C to 35 Fixed data-1 (Initialized data)
26 to 2E Fixed data-1 (Initialized data) 36
2F A6 A6 1.5 MHz deviation adj. 37 Fixed data-2
30 80 80 BPF f0 adj. 38
31 to 4F Fixed data-1 (Initialized data) 39 Fixed data-1 (Initialized data)
50 67 79 3A Fixed data-2
LCD level adj. (VCO adj.)
51 79 67 3B to 55 Fixed data-1 (Initialized data)
52 84 84 LCD V-COM adj. 56 Fixed data-2
53 to 55 Fixed data-1 (Initialized data) 57 Fixed data-1 (Initialized data)
56 87 87 58
LCD White balance adj. Fixed data-2
57 68 68 59
58 AF AF LCD level adj. (Contrast adj.) 5A to 6E Fixed data-1 (Initialized data)
59 to 5B Fixed data-1 (Initialized data) 6F Fixed data-2
5C 70 to 7F Fixed data-1 (Initialized data)
Fixed data-2
5D
5E to C0 Fixed data-1 (Initialized data)
C1 Fixed data-2
C2 to F3 Fixed data-1 (Initialized data)
F4 00 00
F5 00 00
F6 00 00
F7 00 00
F8 00 00
F9 00 00
Emergency memory
FA 00 00
FB 00 00
FC 00 00
FD 00 00
FE 00 00
FF 00 00
6-9
7. E Page Table
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, A, C, D, E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
Initial value
Address Remark
NTSC PAL
10 Fixed data-2
11 to B0 Fixed data-1 (Initialized data)
B1 Fixed data-2
B2 Fixed data-1 (Initialized data)
B3 Fixed data-2
B4, B5 Fixed data-1 (Initialized data)
B6 Fixed data-2
B7 Fixed data-1 (Initialized data)
B8 Fixed data-2
B9 to BF Fixed data-1 (Initialized data)
C0 Fixed data-2
C1 to FF Fixed data-1 (Initialized data)
6-10
8. F Page Table Initial value

Note 1: Check that the data of page: 0, address: 10 is “00”. Address Remark
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing NTSC PAL
the 8, A, C, D, E, F, 1F Page Data”) 4F 19 19
Fixed data-2: Modified data. (Refer to “2. Modification 50 00 00
51 32 32
Initial value Flange back adj.
Address Remark 52 04 04
NTSC PAL
53 00 00
10 80 80 28 MHz origin osillation adj.
54 00 00
11 Fixed data-1 (Initialized data)
12 4A 4A
58
13 56 56 Fixed data-2
59
14 11 11
Hall adj. 5A FF FF Optical axis adj.
15 20 20
5B to 8D Fixed data-1 (Initialized data)
16 02 02
8E
17 E0 E0
8F Fixed data-2
18, 19 Fixed data-1 (Initialized data)
90
1A 00 00
LV standard data input 91 to 96 Fixed data-1 (Initialized data)
1B 60 60
97 Fixed data-2
1C to 29 Fixed data-1 (Initialized data)
98 to A5 Fixed data-1 (Initialized data)
2A 1B 1B
A6 Fixed data-2
2B 00 00 Auto white balance A7 to AC Fixed data-1 (Initialized data)
2C 07 07 standard data input
AD
2D 00 00
AE
2E 0E 0E Fixed data-2
AF
2F 00 00
Auto white balance adj. B0
30 0D 0D
B1 to C4 Fixed data-1 (Initialized data)
31 00 00
C5
32 Fixed data-1 (Initialized data) Fixed data-2
C6
33 22 22 Color reproduction adj.
C7 to E0 Fixed data-1 (Initialized data)
34 Fixed data-1 (Initialized data)
E1 Fixed data-2
35 27 24 Color reproduction adj.
E2 to EA Fixed data-1 (Initialized data)
EB Fixed data-2
3A 00 00
Color reproduction adj. EC to EE Fixed data-1 (Initialized data)
3B F1 EF
EF Fixed data-2
3C, 3D Fixed data-1 (Initialized data)
F0 to FF Fixed data-1 (Initialized data)
3E 29 2A
3F 80 C0
Auto white balance adj. 9. 1F Page table
40 58 5A
Note 1: If reading/writing data on pages 1F, set data: 01 to page:
41 C0 C0 0, address: 10, and then select pages F. By this data set-
42, 43 Fixed data-1 (Initialized data) ting, the pages 1F can be selected.
44 28 28 After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
45 EC EC Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
46 35 35 the 8, A, C, D, E, F, 1F Page Data”)
47 8F 8F Fixed data-2: Modified data. (Refer to “2. Modification
48 13 13
49 B8 B8 Flange back adj. Initial value
Address Remark
4A 00 00 NTSC PAL
4B 00 00 00 to 1D Fixed data-1 (Initialized data)
4C 00 00 1E Fixed data-2
4D 00 00 1F to FF Fixed data-1 (Initialized data)
4E 2B 2B
6-11
1-3. CAMERA SYSTEM ADJUSTMENTS

Before perform the camera system adjustments, check that the
specified values of “28 MHz Origin Oscillation Adjustment”, “S
VIDEO OUT Y level Adjustment” and “S VIDEO OUT C level
Adjustment” of “VIDEO SYSTEM ADJUSTMENT” are satisfied.
Check that the data of page: 0, address: 10, is “00”.
If not, select page: 0, address: 10, and set data “00”
1. HALL Adjustment RadarW

For detecting the position of lens iris, adjust the hall AMP gain
and offset.
Mode CAMERA
Subject Not required
Measurement Point Displayed data of page: 1 (Note 3)
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 12 to 17
Specified value 87 to 8B during IRIS OPEN
15 to 19 during IRIS CLOSE
If not, turn the power of unit OFF/ON.
Note 3: The right two digits of the page: 1 displayed data of the
adjusting remote commander.
1:00:XX
Displayed data
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 6 94 89
3 6 95 17
4 6 01 6D Press PAUSE button. (Note 4)
5 6 02
“01”.
Note 4: The adjustment data will be automatically input to page:
F, address: 12 to 17.
Checking method:
1 0 03 03
Check that the displayed data
3 1 (Note 3) during IRIS OPEN
satisfied the specified value.
Check that the displayed data
5 1 (Note 3) during IRIS CLOSE
satisfied the specified value.
Processing after Completing Adjustment:

2 6 94 00
3 6 95 00
4 0 03 00
5 0 01 00
6-12
2. Flange Back Adjustment RadarW Adjusting method:

(Using the minipattern box)
The inner focus lens flange back adjustment is carried out
automatically. In whichever case, the focus will be deviated dur- 1 0 01 01
ing auto focusing/manual focusing. 2 6 48 01
Mode CAMERA 3 6 01 13 Press PAUSE button.
Subject Siemens star chart with ND filter for 4 6 01 27 Press PAUSE button. (Note 7)
minipattern box (Note 1) Check the data changes to
5 6 02
Measurement Point Check operation on monitor TV “01”.
Measuring Instrument Note 7: The adjustment data will be automatically input to page:
F, address: 44 to 54.
Adjustment Page F
Adjustment Address 44 to 54 Processing after Completing Adjustment:
Note 1: Dark Siemens star chart. Order Page Address Data Procedure
If not, turn the power of unit OFF/ON. 2 6 01 25 Press PAUSE button.
Note 4: Perform the adjustment with the camcorder in horizon- 3 6 01 00 Press PAUSE button.
tal state.
4 6 48 00
Note 5: Perform “HALL Adjustment” before this adjustment.
5 0 01 00
Switch setting: Perform “Flange Back
1) NIGHTSHOT PLUS ........................................................ OFF 6
Check”.
2) DISPLAY (Menu setting) ............................................... LCD
Preparations before adjustments:

1) The minipattern box is installed as shown in the following fig-
ure.
Note 6: The attachment lenses are not used.
2) Install the minipattern box so that the distance between it and
the front of lens of camcorder is less than 3 cm.
3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the
specified voltage ± 0.01 Vdc.
5) Check that the center of Siemens star chart meets the center of
shot image screen with the zoom lens at TELE end and WIDE
end respectively.
Specified voltage: The specified voltage varies according to the

minipattern box, so adjust the power supply
output voltage to the specified voltage written
on the sheet which is supplied with the
minipattern box.
Below 3 cm
Minipattern box
Camcorder
Camera
table
Regulated power supply

Output voltage : Specified voltage ±0.01 Vdc
Output current : more than 3.5 A
Red (+)
Black (–)
Yellow (SENS +)
White (SENS –) Need not connected

Black (GND)
Fig. 6-1-6
6-13
3. Flange Back Adjustment 3-2. Flange Back Adjustment (2) RadarW

(Using the flange back adjustment chart and Perform this adjustment after performing “Flange Back Adjust-
subject more than 500 m away) ment (1)”.
The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during Mode CAMERA
auto focusing/manual focusing. Subject Subject more than 500 m away
(Subject with clear contrast such as
3-1. Flange Back Adjustment (1) RadarW buildings, etc.)
Mode CAMERA Measurement Point Check operation on monitor TV
Subject Flange back adjustment chart Measuring Instrument

(2.0 m from the front of lens) Adjustment Page F
(Luminance: 300 to 400 lux) Adjustment Address 44 to 54
Measurement Point Check operation on monitor TV Note 1: Check that the data of page: 0, address: 10 is “00”.
Measuring Instrument Note 2: Check that the data of page: 6, address: 02 is “00”.
Adjustment Page F If not, turn the power of unit OFF/ON.
Adjustment Address 44 to 54 Switch setting:

Note 1: Check that the data of page: 0, address: 10 is “00”. 1) NIGHTSHOT PLUS ........................................................ OFF
Note 2: Check that the data of page: 6, address: 02 is “00”. 2) DISPLAY (Menu setting) ................................................ LCD
If not, turn the power of unit OFF/ON.
Note 3: Perform the adjustment with the camcorder in horizon- Preparations before adjustments:
tal state. 1) Set the zoom lens to the TELE end and expose a subject that is
Note 4: Perform “HALL Adjustment” before this adjustment. more than 500 m away.
(subjects with clear contrast such as building, etc.)
Switch setting: (Nearby subjects less than 500 m away should not be in the
1) NIGHTSHOT PLUS ........................................................ OFF screen)
2) DISPLAY (Menu setting) ................................................ LCD
Adjusting method:
1) Place the Flange back adjustment chart 2.0 m from the front
of the lens. 1 0 01 01
2) Check that the center of Flange back adjustment chart meets 2 6 48 01
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.
Place ND filter on the lens so
Adjusting method: 4 that the optimum image is
obtain.
5 6 01 29 Press PAUSE button. (Note 3)
1 0 01 01
2 6 48 01 6 6 02
“01”.
3 6 01 13 Press PAUSE button. Note 3: The adjustment data will be automatically input to page:
4 6 01 15 Press PAUSE button. (Note 5) F, address: 44 to 54.
5 6 02 Processing after Completing Adjustment:
“01”.
Note 5: The adjustment data will be automatically input to page: Order Page Address Data Procedure
F, address: 44 to 54. 1 6 01 00 Press PAUSE button.
4 6 48 00
5 0 01 00
Perform “Flange Back
3 6 01 00 Press PAUSE button. 6
Check”.
4 6 48 00
5 0 01 00
Perform “Flange Back
6
Adjustment (2)”.
6-14
4. Flange Back Check
Mode CAMERA
Subject Siemens star
(2.0 m from the front of the lens)
(Luminance: approx. 200 lux)
Measurement Point Check operation on monitor TV
Measuring Instrument
Specified value Focused at the TELE end and WIDE
end
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
Note 2: When the auto focus is ON, the lens can be checked if it
is focused or not by observing the data on the page: 1 of
the adjusting remote commander.
1 : 00 : XX
Odd: Focused
Even: Unfocused
Checking method:
Place the Siemens star 2.0 m
1
from the front of the lens.
To open the IRIS, decrease
the luminous intensity to the
2 Siemens star up to a point
before noise appear on the
image.
3 6 40 01
4 6 41 01
Shoot the Siemens star with
5
the zoom TELE end.
6 Turn on the auto focus.
7 0 03 0F
Check that the lens is
8 1
focused. (Note 2)
9 6 21 10
Shoot the Siemens star with
10
the zoom WIDE end.
Observe the TV monitor and
11 check that the lens is
focused.

1 6 21 00
2 6 40 00
3 6 41 00
4 0 03 00
6-15
5. Optical Axis Adjustment 9) Select page: F, address: 5A, and set correction data, then press
Correct a deviation of optical axis between the lens and the CCD the PAUSE button on the adjusting remote commander.
imager. 10) Shoot the Siemens Star with the zoom at TELE end.
If deviated, the screen center will be shifted when the lens is 11) Change the lens direction so that the center of Siemens Star
zoomed from TELE end to WIDE end. coincides with the center of optical axis deviation specifica-
tion frame.
Subject Siemens Star 12) Shoot the Siemens Star with the zoom at WIDE end.
Measurement Point Check operation on monitor TV 13) Measure the amount of deviation “L2” (distance from the cen-
ter of Siemens Star to the center of optical axis deviation speci-
fication frame).
Adjustment Page F 14) Compare L1 and L2, and make sure that the L2 is smaller than
Adjustment Address 5A L1.
Note 1: Check that the data of page: 0, address: 10 is “00”. If large, select page: F, address: 5A, and set data: 00, then
Note 2: “Flange Back Adjustment” must be already finished. press the PAUSE button on the adjusting remote commander.
Switch setting: Processing after completion of adjustment:

1) DIGITAL ZOOM (Menu setting) .................................... OFF 1) Select page: 0, address: 01, and set data: 00.
2) STEADYSHOT (Menu setting)
(CCD-TRV328/TRV428/TRV428E only) ....................... OFF
Preparation for adjustment:

1) Play a monoscope portion of the System Check tape (WR5-
5NSP (NTSC) or WR5-5CSP (PAL)).
2) Stick the optical axis deviation specification frame to the moni-
tor screen so that the center of monoscope coincides with the
center of specification frame.
3) Select the CAMERA mode.
Adjusting method:
2) Select page: F, address: 5A, and set data: 00, then press the
PAUSE button on the adjusting remote commander.
3) Place the Siemens Star at 2 m position away from the lens.
4) Shoot the Siemens Star with the zoom at TELE end.
5) Change the lens direction so that the center of Siemens Star 0
coincides with the center of optical axis deviation specifica- 337.5 22.5
tion frame.
6) Shoot the Siemens Star with the zoom at WIDE end. 8
7) Check on the monitor TV which area the center of Siemens
Star exists of the optical axis deviation specification frame. 7 1
292.5 67.5
At this time, measure the amount of deviation “L1” (distance
from the center of Siemens Star to the center of optical axis
deviation specification frame).
8) From the following table, read correction data according to 270 6 2 90
the area.
Area Deviation Phase Correction Data 247.5 112.5

1 22.6° to 67.5° 01 5 3
2 67.6° to 112.5° 02
3 112.6° to 157.5° 03
4
4 157.6° to 202.5° 04 202.5 157.5
5 202.6° to 247.5° 05 180

6 247.6° to 292.5° 06 Fig. 6-1-7
7 292.6° to 337.5° 07
8 337.6° to 22.5° 08
6-16
6. Picture Frame Setting Check on the oscilloscope

Mode CAMERA 1. Horizontal period
Subject Color bar chart
(Color reproduction adjustment A=B C=D
frame)
(1.0 m from the front of lens) B C
Measurement Point Video terminal of A/V OUT jack A D

(75 Ω terminated)
Measuring Instrument Oscilloscope and monitor TV
Specified Value A=B, C=D, E=F
Note 2: Perform “Flange Back Adjustment” and “Optical Axis
Adjustment” before this adjustment.
Switch setting:
1) DIGITAL ZOOM (Menu setting) .................................... OFF
Setting method:
2) Adjust the zoom and the camera direction, and set to the speci- Fig. 6-1-8
fied position.
3) Mark the position of the picture frame on the monitor display, 2. Vertical period
and adjust the picture frame to this position in following ad-
justments using “Color reproduction adjustment frame”. E E=F F
Processing after Completing Camera System Adjustments:

Fig. 6-1-9
Check on the monitor TV (Underscanned mode)
Color bar chart picture frame Monitor TV picture frame
Fig. 6-1-10
6-17
7. Color Reproduction Adjustment NTSC model

Adjust the color separation matrix coefficient so that proper color
reproduction is produced. R-Y
Mode CAMERA
Subject Color bar chart R MG
(Color reproduction adjustment
frame)
Measurement Point Video terminal of A/V OUT jack
(75 Ω terminated) YE
Measuring Instrument Vectorscope B-Y
Adjustment Page F
Adjustment Address 33, 35, 3A, 3B B
Specified Value All color luminance points should
settle within each color reproduction CY
frame. G
Note 2: Perform “Flange Back Adjustment” before this adjust-
ment. Burst
Note 3: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428
PAL model: CCD-TRV228E/TRV428E
Switch setting:
PAL model
3) STEADYSHOT (Menu setting) R-Y
Burst MG
R
Adjusting method:
1 0 01 01
2 6 48 01 YE
B-Y
Set the following data.
3 6 9D 68: NTSC model
67: PAL model B
4 6 01 3D Press PAUSE button.
CY
press PAUSE button. G
5 F 80
37: NTSC model
B7: PAL model
Adjust the GAIN and
PHASE of the vectorscope,
and set to the burst lumi-
6 Fig. 6-1-11
nance point to the burst
position of color reproduc-
tion frame.
33 Change the data and settle
35 each color luminance point in
7 F
3A each color reproduction
3B frame. (Note 4)
Note 4: Be sure to press the PAUSE button of the adjusting re-
mote commander before changing the addresses. If not,
the new data will not be written to the memory.

2 6 48 00
3 6 9D 00
4 0 01 00
6-18
8. LV Standard Data Input RadarW 9. Auto White Balance Standard Data Input
Adjust the normal coefficient of the light value. Adjust the white balance reference at 3200K.
Mode CAMERA Mode CAMERA

Subject Clear chart Subject Clear chart
(Color reproduction adjustment frame) (Color reproduction adjustment frame)
Measurement Point Displayed data of page: 1 (Note 4) Adjustment Page F
Measuring Instrument Adjusting remote commander Adjustment Address 2A to 2D
Adjustment Page F Note 1: Perform “Color Reproduction Adjustment” before this
Adjustment Address 1A, 1B adjustment.
Specified Value 0FE0 to 1020 Note 3: Check that the data of page: 6, address: 02 is “00”.
Note 1: Perform “Flange Back Adjustment” before this adjust- If not, turn the power of unit OFF/ON.
ment.
Note 2: Check that the data of page: 0, address: 10 is “00”. Switch setting:
Note 3: Check that the data of page: 6, address: 02 is “00”. 1) NIGHTSHOT PLUS ........................................................ OFF
If not, turn the power of unit OFF/ON. 2) DIGITAL ZOOM (Menu setting) .................................... OFF
Note 4: The right four digits of the page: 1 displayed data of the 3) STEADYSHOT (Menu setting)
adjusting remote commander. (CCD-TRV328/TRV428/TRV428E only) ....................... OFF
1:XX:XX 4) DISPLAY (Menu setting) ................................................ LCD
Displayed data
Switch setting: Before performing the “Auto White Balance Standard Data In-
1) NIGHTSHOT PLUS ........................................................ OFF put”, check the data of page: 3, address: FF.
2) DIGITAL ZOOM (Menu setting) .................................... OFF If the data is 01, perform the work after turning on the power by
3) STEADYSHOT (Menu setting) the following method.
(CCD-TRV328/TRV428/TRV428E only) ....................... OFF 1) Turn the power off once, if the data of page: 3, address: FF is
4) DISPLAY (Menu setting) ................................................ LCD 01.
2) Turn on the power of the set with the HOLD switch on the
Adjusting method: adjustment remote commander left on the NOR side.
3) Change over the HOLD switch on the adjustment remote com-
mander to the ADJ side.
1 0 01 01 4) Execute the “Auto White Balance Standard Data Input”
2 6 48 01
3 6 01 0D Press PAUSE button. (Note 5) Adjusting method:
Check the data changes to Order Page Address Data Procedure

4 6 02
“01”. 1 0 01 01
5 0 03 1E 2 6 48 01
Check that the displayed data 3 6 01 11 Press PAUSE button.
6 1 (Note 4) satisfied specified
4 6 01 0B Press PAUSE button. (Note 4)
value.
Note 5: The adjustment data will be automatically input to page: 5 6 02
“01”.
F, address: 1A and 1B.
Processing after Completing Adjustment: F, address: 2A to 2D.
Order Page Address Data Procedure Processing after Completing Adjustment:

2 6 48 00
3 0 03 00
2 6 48 00
4 0 01 00
3 0 01 00
6-19
10. Auto White Balance Adjustment RadarW

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.
Mode CAMERA
Subject Clear chart
(Color reproduction adjustment
frame)
Filter Filter C14 for color temperature
correction
Adjustment Page F
Adjustment Address 2E to 31, 3E to 41
Note 1: Perform “Auto White Balance Standard Data Input” be-
fore this adjustment.
Note 3: Check that the data of page: 6, address: 02 is “00”. If
not, turn the power of unit OFF/ON.
Note 4: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428
Switch setting:
Adjusting method:
Place the C14 filter on the
1
lens.
2 0 01 01
3 6 48 01
4 F 3E 2C Press PAUSE button.
press PAUSE button.
5 F 3F
80: NTSC model
40: PAL model
press PAUSE button.
6 F 40
58: NTSC model
59: PAL model
press PAUSE button.
7 F 41
10: NTSC model
C0: PAL model
9 6 01 81 Press PAUSE button. (Note 5)
10 6 02
“01”.
F, address: 2E to 31.

2 6 48 00
3 0 01 00
Remove the C14 filter on the
4
lens.
6-20
11. Auto White Balance Check RadarW Checking method:
Mode CAMERA Order Page Address Data Procedure

Subject Clear chart Check that the lens is not
1
(Color reproduction adjustment covered with either filter.
frame) 2 6 48 01
Filter Filter C14 for color temperature INDOOR check
correction 3 6 01 0F Press PAUSE button.
ND filter 1.0, 0.4 and 0.1
Check that the center of the
Measurement Point Video terminal of Displayed data of white luminance point within
A/V OUT jack page: 1 (Note 3) 4
the circle shown Fig. 6-1-12
(75 Ω terminated) (A)
Measuring Instrument Vectorscope Adjusting remote 5 6 01 00 Press PAUSE button.
commander
OUTDOOR check
Specified Value Fig. 6-1-12 NTSC model
(A) and (B) R ratio: Place the C14 filter on the
6
2C40 to 2CC0 lens.
B ratio: 7 6 01 3F Press PAUSE button.
57D0 to 5850 Check that the center of the
InOut data: white luminance point within
8000 to 8BC0 8
the circle shown Fig. 6-1-12
PAL model (B)
R ratio: 9 0 03 04
2C00 to 2C80
B ratio: Check that the displayed data
5980 to 5A00 10 1 (Note 3) satisfied the R ratio
InOut data: specified value.
8000 to 8BC0 11 0 03 05
Note 1: Check that the data of page: 0, address: 10 is “00”. Check that the displayed data
Note 2: Perform “Auto White Balance Adjustment” before this 12 1 (Note 3) satisfied the B ratio
adjustment. specified value.
Note 3: The right four digits of the page: 1 displayed data of the 13 Remove the C14 filter
InOut data check
1:XX:XX
Displayed data Place the ND filter 1.5 (1.0 +
14
Note 4: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428 0.4 + 0.1) on the lens.
PAL model: CCD-TRV228E/TRV428E 15 6 01 00 Press PAUSE button.
16 0 03 06
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF Check that the displayed data
2) DIGITAL ZOOM (Menu setting) .................................... OFF 17 1 (Note 3) satisfied the InOut
3) STEADYSHOT (Menu setting) data specified value.
4) DISPLAY (Menu setting) ................................................ LCD Processing after Completing Adjustment:
R-Y 2 mm Order Page Address Data Procedure

2 6 48 00
B-Y 3 0 03 00
Remove the ND filter 1.5
4
2 mm (1.0 + 0.4 + 0.1) on the lens.
Fig. 6-1-12 (A)
R-Y
1 mm
0.5 mm
B-Y
3 mm
3 mm
Fig. 6-1-12 (B)

6-21
12. Angular Velocity Sensor Output Check and 13. CCD Defect Check RadarW
Steadyshot Check (CCD-TRV328/TRV428/TRV428E)
RadarW Mode CAMERA
Check the angular velocity sensor output. Subject Not required
Measurement Point Check on the monitor TV
Precautions on the Parts Replacement
There are two types of repair parts. Measuring Instrument
Type A ENC03JA Note: Check that the data of page: 0, address: 10 is “00”.
Type B ENC03JB
Replace the broken sensor with a same type sensor. If replace with Checking method:
other type parts, the image will vibrate up and down or left and
right during hand-shake correction operations.
Precautions on Angular Velocity Sensor 2 6 1F CC
The sensor incorporates a precision oscillator. Handle it with care
3 6 40 03
as if it dropped, the balance of the oscillator will be disrupted and
operations will not be performed properly. Check on the monitor screen
4
that no defect is found.
Mode CAMERA 5 6 40 04
Subject Not required Check on the monitor screen
6
Measurement Point Displayed data of page: 1 (Note 2) that no defect is found.
Measuring Instrument Adjusting remote commander
Specified value PITCH data: 2680 to 5080 Processing after Completing Adjustment:
YAW data: 2680 to 5080 Order Page Address Data Procedure
Note 1: Check that the data of page: 0, address: 10 is “00”. 1 6 01 00 Press PAUSE button.
Note 2: The right four digits of the page: 1 displayed data of the
2 6 40 00
1:XX:XX 3 6 1F 00
Displayed data
Switch setting:
1) ZOOM ..................................................................... TELE end
2) STEADYSHOT (Menu setting) ........................................ ON
Checking method:
PITCH sensor output check (SE752 of SI-039 board)
1 0 03 11
With the set in still state,
check that the displayed data
2 1
(Note 2) satisfies the PITCH
data specified value.
YAW sensor output check (SE751 of SI-039 board)
3 0 03 12
With the set in still state,
check that the displayed data
4 1
(Note 2) satisfies the YAW
data specified value.
5 0 03 00
Steadyshot operation check
Shake the set vertically and
horizontally to check that the
6
steadyshot function operates
normally.
6-22
1-4. LCD SYSTEM ADJUSTMENTS 1. LCD Level Adjustment (PD-204 board) RadarW
Before perform the LCD system adjustments, check that the data This adjustment does the following items automatically.
of page: 0, address: 10 is “00”. VCO Adjustment
If not, select page: 0, address: 10, and set the data “00”. Contrast Adjustment
Note 1: The back light (fluorescent tube) is driven by a high volt- Mode VTR stop (PLAY/EDIT mode)
age AC power supply. Therefore, do not touch the back Signal No signal
light holder to avoid electrical shock. Adjustment Page C
Note 2: When replacing the LCD unit, be careful to prevent dam-
ages caused by static electricity. Adjustment Address 50, 51 (VCO Adjustment)
Note 3: Set the LCD BRIGHT (Menu setting) to the center. 58 (Contrast Adjustment)
Set the LCD B.L. (Menu setting) to the BRIGHT. Note 1: Check that the data of page: 0, address: 10 is “00”.
Set the LCD COLOR (Menu setting) to the center. Note 2: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428
Note 4: Open the LCD panel during the LCD system adjustment. PAL model: CCD-TRV228E/TRV428E
Adjusting method: (NTSC model)

1 0 01 01
2 3 01 5A Press PAUSE button. (Note 3)
3 3 02
“00”.
Check that the data is “00”.
4 3 03
(Note 4)
5 0 01 00
Adjusting method: (PAL model)

1 0 01 01
2 3 01 5A Press PAUSE button. (Note 3)
3 3 02
“00”.
4 3 03
(Note 4)
Read the data and this data is
5 C 50
named D50.
Convert D50 to decimal notation,
6
and obtain D50’. (Note 5)
Calculate D51’ using following
7 equations. (decimal calculation)
D51’ = D50’ – 18
Convert D51’ to a hexadecimal
8 number, and obtain D51.
(Note 5, 6)
9 C 51 D51 Press PAUSE button.
10 0 01 00
C, address: 50, 51 and 58.
Note 4: If the data is other than “00”, adjustment has errors.
For the error contents, see the following table.
Note 5: Refer to table 6-4-1. “Hexadecimal-decimal conversion
table”.
Note 6: If D51’ < 0, then D51 = 00
Page Address Data Error contents

03 01 Adjustment time out.
3 60 Contrast adjustment error
C6
62 VCO adjustment error
6-23
2. LCD V-COM Adjustment (PD-204 board) 3. LCD White Balance Adjustment (PD-204 board)
Set the DC bias of the common electrode drive signal of LCD to Correct the white balance.
the specified value. If deviated, the LCD screen color cannot be reproduced.
If deviated, the LCD display will be move, producing flicker and
conspicuous vertical lines. Mode VTR stop (PLAY/EDIT mode)
Signal No signal
Mode VTR stop (PLAY/EDIT mode)
Measurement Point Check on LCD screen
Signal No signal
Measurement Point Check on LCD screen
Adjustment Page C
Adjustment Address 56, 57
Adjustment Page C
Specified Value LCD screen must not be colored
Adjustment Address 52
Specified Value The brightness difference between Note 2: Check the white balance only when replacing the fol-
the section-A and section-B is lowing parts. If necessary, adjust them.
minimum 1. LCD panel
Note 1: Perform “LCD Level Adjustment” before this adjustment. 2. Light induction plate
Note 2: Check that the data of page: 0, address: 10 is “00”. 3. IC6001
Adjusting method: Adjusting method:

Order Page Address Data Procedure Order Page Address Data Procedure
1 0 01 01 1 0 01 01
Change the data so that 2 C 56 87 Press PAUSE button.
2 C 52 brightness of the section A 3 C 57 68 Press PAUSE button.
and section B is equal.
Check that the LCD screen is
3 C 52 Subtract 8 from the data. 4 not colored. If not colored,
4 C 52 Press PAUSE button. proceed to step 6.
5 0 01 00 Change the data so that the
56
5 C LCD screen is not colored.
57
(Note 3)
6 0 01 00
B A Note 3: To write in the non-volatile memory (EEPROM), press
the PAUSE button each time to set the data.
A B
B A
A B
Fig. 6-1-13
6-24
6-2. MECHANISM SECTION ADJUSTMENTS 2-3. TAPE PATH ADJUSTMENT

Mechanism Section adjustments, checks, and replacement of
mechanism parts, refer to the separate volume “8mm Video Mecha- 1. Preparations for Adjustment
nism Adjustment Manual IX M2000 Mechanism ”. 1) Clean the tape path face (tape guide, capstan shaft, pinch roller).
2) Connect the adjustment remote commander.
Note: Before perform the adjustments, check that the data of page: 3) Turn on the HOLD switch of the adjustment remote com-
0, address: 10 is “00”. mander.
If not, select page: 0, address: 10, and set the data “00”. 4) Select page: 0, address: 01, and set data: 01.
5) Select page: C, address: 14, set data: 08, and press the PAUSE
2-1. ADJUSTMENT REMOTE COMMANDER button of the adjustment remote commander.
Connect the adjustment remote commander to CN007 of VC-341 (Be sure to perform “Processing after operation” after com-
board via I/F unit for LANC control (J-6082-521-A) and CPC jig pleting adjustments.)
connector (J-6082-539-A). To operate the adjustment remote com- 6) Connect the oscilloscope to I/F unit for LANC control.
mander, connect the AC power adapter (8.4Vdc) to the DC IN Channel 1: PB RF (Pin 9 of CN007)
jack of I/F unit for LANC control, or connect the L series Info- Channel 2 (Trigger): SWP (Pin 5 of CN007)
LITHIUM battery to the battery terminal of I/F unit for LANC 7) Playback the alignment tape for tracking. (WR5-1NP (NTSC),
control. WR5-1CP (PAL))
8) Check that the oscilloscope RF waveform is normal at the en-
2-2. OPERATING WITHOUT CASSETTE trance and exit.
1) Refer to “Section 2. DISASSEMBLY” and supply the power If not normal, adjust according to the separate volume “8mm
with the cabinet assembly removed. (So that the mechanical Video Mechanical Adjustment Manual IX M2000 Mechanism ”.
deck can be operated.) 9) Perform “Processing after operations”, after completing ad-
2) Connect the adjustment remote commander. justment.
3) Turn on the HOLD switch of the adjustment remote com-
mander. Test point of I/F unit for LANC control
4) Close the cassette compartment without loading a cassette and Pin No. Signal Name Pin No. Signal Name
complete loading.
BL 15 EVF VCO
6) Select page: C, address: 14, set data: 01, and press the PAUSE 14 EVF VG BL 4.75
button of the adjustment remote commander. 9 PB RF (MON)
7) Select page: D, address: 10, set data: 02, and press the PAUSE
3 BPF MONI 6, 8 ,10 GND
button of the adjustment remote commander.
8) Select page: A, address: 10, set data: 10, and press the PAUSE TMS 7 REC RF (RF IN)
button of the adjustment remote commander. TDI TDO
9) Select page: 7, address: 10, set data: 02, and press the PAUSE 5 SWP TCK
10) Disconnect the power supply of the unit. 4 CAP FG 2 IR VIDEO
By carrying out the above procedure, the unit can be operated Note: Pin No. are those of CN007.
without loading a cassette. Table 6-2-1.
Be sure to carry out “Processing after Operations” after check-
ing the operations. [Procedure after operations]
Set the data of page: A, address: 10 to the following if the 1) Connect the adjustment remote commander, and turn on the
sensor ineffective mode, forced VTR power supply On mode HOLD switch.
or forced camera power supply ON mode are to be used to- 2) Select page: 0, address: 01, and set data: 01.
gether. 3) Select page: C, address: 14, set data: 00, and press the PAUSE
Forced VTR power ON mode ....................................... 12 button of the adjustment remote commander.
Forced camera power ON mode ................................... 11 4) Select page: 0, address: 01, and set data: 00.
5) Remove the power supply from the unit.
[Procedure after checking operations]
Check this section
2) Select page: C, address: 14, set data: 00, and press the PAUSE
(Normal waveform)
button of the adjustment remote commander. Entrance Exit side
3) Select page: D, address: 10, set data: 00, and press the PAUSE side
4) Select page: D, address: 10, set data: 00, and press the PAUSE
button of the adjustment remote commander. CH1
5) Select page: 7, address: 10, set data: E2, and press the PAUSE
7) Disconnect the power supply of the unit.
CH2
(Trigger)
Fig. 6-2-1.
6-25
6-3. VIDEO SECTION ADJUSTMENTS
3-1. PREPARATIONS BEFORE ADJUSTMENTS
Use the following measuring instruments for video section adjust-

ments.
Note: NTSC model: CCD-TRV128/TRV228/TRV328/TRV428

3-1-1. Equipment to Required
1) TV monitor
2) Oscilloscope (dual-phenomenon, band width above 30 MHz
with delay mode) (Unless specified otherwise, use a 10 : 1
probe)
3) Frequency counter
4) Digital voltmeter
5) Audio level meter
6) Audio distortion meter
7) Regulated power supply
8) NTSC alignment tapes
• For tracking adjustment (WR5-1NP)
Parts code: 8-967-995-02
• For video frequency characteristics adjustment (WR5-7NE)
Parts code: 8-967-995-13
• For checking Standard 8 mode operations
For LP (WR5-4NL)
Parts code: 8-967-995-51
For SP (WR5-5NSP)
Parts code: 8-967-995-42
Note: The following alignment tapes can also be used.
WR5-4NSP (8-967-995-41)
• For checking Hi8 mode operations
For LP (WR5-8NLE)
Parts code: 8-967-995-52
For SP (WR5-8NSE)
Parts code: 8-967-995-43
• For BPF adjustment (WR5-11NS)
Parts code: 8-967-995-71
9) PAL alignment tapes
• For tracking adjustment (WR5-1CP)
Parts code: 8-967-995-07
• For video frequency characteristics adjustment (WR5-7CE)
Parts code: 8-967-995-18
• For checking Standard 8 mode operations
For LP (WR5-4CL)
Parts code: 8-967-995-56
For SP (WR5-5CSP)
Parts code: 8-967-995-47
Note: The following alignment tapes can also be used.
1) WR5-3CL (8-967-995-36)
2) WR5-4CSP (8-967-995-46)
• For checking Hi8 mode operations
For LP (WR5-8CLE)
Parts code: 8-967-995-57
For SP (WR5-8CSE)
Parts code: 8-967-995-48
• For BPF adjustment (WR5-11CS)
Parts code: 8-967-995-76
10) Adjustment remote commander (J-6082-053-B)
11) CPC jig connector (J-6082-539-A)
12) I/F unit for LANC control (J-6082-521-A)
6-26
3-1-2. Precautions on Adjusting

This set is adjusted in two modes, VTR mode and CAMERA mode.
3-1-3. Adjusting Connectors

Some of the adjusting points of the video section are concentrated The following table lists the test point of I/F unit of for LANC
at VC-341 board CN007. Connect the measuring instruments via control.
I/F unit for LANC control (J-6082-521-A) and CPC jig connector
Pin No. Signal Name Pin No. Signal Name
(J-6082-539-A).
The following table shows the pin No. and signal name of CN007. BL 15 EVF VCO
Pin No. Signal Name Pin No. Signal Name 14 EVF VG BL 4.75
1 EEP SCK 9 PB RF 9 PB RF (MON)
2 PB RF 10 REG GND 3 BPF MONI 6, 8, 10 GND
3 BPF MONI 11 LANC OUT TMS 7 REC RF (RF IN)
4 CAP FG 12 LANC IN TDI TDO
5 SWP DIR 13 XLANC PWR ON 5 SWP TCK
6 REG GND 14 EEP SO 4 CAP FG 2 IR VIDEO
7 REC RF 15 EEP SI Note: Pin No. are those of CN007.

Table 6-3-2
8 REG GND 16 XCS EEP
Table 6-3-1
3-1-4. Connecting the Equipment

Connect the measuring instruments as shown in Fig. 6-3-1 and
perform the adjustments.
Connecting the TV Monitor and Adjustment Remote Commander
Note: Use either the AC power adaptor or the InfoLITHIUM battery as the power supply of I/F unit for LANC control.
CN007
1
16
A/V OUT jack
CPC lid
Screw (M2)
Audio (black)
TV monitor
L serices Info
Video (yellow)
AC adaptor AC IN
AC adaptor AC IN
Conductor side
LANC jack

(J-6082-521-A)
Fig. 6-3-1
6-27
3-1-5. Alignment Tapes

The following table lists alignment tapes which are available.
Use the tape specified in the signal column for each adjustment. If the type of tape to be used for checking operations is not specified, use
whichever type.
Alignment tape
Name Recording mode Tape type Tape speed Usage
Tracking Standard 8 MP SP Tape path adjustment, Switching position
(WR5-1NP(NTSC), WR5-1CP(PAL)) adjustment
Video frequency characteristics Hi8 ME SP (NTSC) Frequency characteristics adjustment
(WR5-7NE(NTSC), WR5-7CE(PAL)) LP (PAL)
Operation check Standard 8 MP SP Operation check
(WR5-5NSP(NTSC), WR5-5CSP(PAL))
Operation check Hi8 ME SP
(WR5-8NSE(NTSC), WR5-8CSE(PAL))
Operation check Standard 8 MP LP
(WR5-4NL(NTSC), WR5-4CL(PAL))
Operation check Hi8 ME LP
(WR5-8NLE(NTSC), WR5-8CLE(PAL))
BPF adjustment Standard 8 MP SP BPF adjustment
(WR5-11NS(NTSC), WR5-11CS(PAL))
Tape type:
ME .................................. Particle type metal tape
MP ................................... Evaporated type metal tape
Table 6-3-3
Fig. 6-3-2. shows the 75% color bar signals recorded on the alignment tape.
Note: Measure using the VIDEO terminal (Terminated at 75 Ω).
For NTSC model

White (100%)
Yellow
Cyan
Magenta
Green
White (75%)
Magenta
Red
White
Blue
Burst signal
Yellow
Green
Cyan
Red
Blue
0.714 V
(75%)
1V
0.286 V
0.286 V Q I Black
Q I
White
Horizontal sync signal (100%)
Color bar signal waveform Color bar pattern
For PAL model

White (100%)
Yellow
Green
Cyan
Magenta
Red
Blue
0.7 V
Magenta
Green
Yellow
1V
Cyan
White
Red
Blue
Black
0.3 V
0.3 V (100%)
Burst signal
Horizontal sync signal
Color bar signal waveform Color bar pattern
Fig. 6-3-2. Color bar signal of alignment tapes
6-28
3-1-6. Output Level and Impedance 3-1-7. Recording Mode (Standard 8/Hi8) switching
S video output The record mode (Standard 8/Hi8) of this unit switches as shown
4-pin mini DIN in the following table. The playback mode (Standard 8/Hi8)
Luminance signal: switches automatically according to the recording mode of the tape
1 Vp-p, 75 Ω, unbalanced played back.
Chrominance signal:
CCD-TRV128/TRV228/TRV328/TRV428: Tape Used Recording Mode
0.286 Vp-p, 75 Ω, unbalanced ME Hi8
CCD-TRV228E/TRV428E:
0.3 Vp-p, 75 Ω, unbalanced Hi8 MP
Audio/Video output MP Standard 8
AV MINIJACK:
VIDEO: 1 Vp-p, 75 Ω, unbalanced, sync negative
AUDIO: 327 mV (at output impedance more than 47 kΩ)
Output impedance with less than 2.2 kΩ
6-29
3-2. SYSTEM CONTROL SYSTEM ADJUSTMENTS 2. Switching Position Adjustment (VC-341 board)
If deviated in this case cause switching noise or jitter on the played
1. Initialization of 8, A, C, D, E, F, 1F Page Data back screen.
If the 8, A, C, D, E, F, 1F page data is erased due to some reason, Mode VTR playback
perform “1-2. INITIALIZATION OF 8, A, C, D, E, F, 1F PAGE
DATA” of “6-1. CAMERA SECTION ADJUSTMENTS”. Signal Alignment tape:
For tracking adjustment
(WR5-1NP(NTSC))
(WR5-1CP(PAL))
3-3. SERVO SYSTEM ADJUSTMENTS Measurement Point CH1: SWP (Pin 5 of CN007)
Before perform the servo system adjustments, check that the speci- CH2: PB RF (Pin 9 of CN007)
fied values of “28 MHz Origin Oscillation Adjustment” of “VIDEO Measuring Instrument Oscilloscope
SYSTEM ADJUSTMENTS” is satisfied.
Adjustment Page C
Check that the data of page: 0, address: 10 is “00”.
If not, select page: 0, address: 10, and set the data “00”. Adjustment Address 16, 17
Specified value t1 = 0 ± 10 µsec
1. CAP FG Offset Adjustment (VC-341 board)
RadarW
Set the CAP FG signal duty cycle to 50% to establish an appropri- Adjusting method:
ate capstan servo. If deviated, the uneven rotation of capstan and
noise can occur in the playback mode.
1 0 01 01
Set the bit value of bit 2 to “1”,
Signal No signal 2 3 92 and press PAUSE button.
Measurement Point Displayed data of page: 3, address: 03 (Note 2)
Measuring Instrument Adjusting remote commander Change the data and minimize
3 C 16
“t1”. (Coarse adjustment)
Adjustment Page C
4 C 16 Press PAUSE button.
Change the data and adjust so
Specified value The data of page: 3, address: 03 is “00”
that the switching position (t1)
Note 1: Check that the data of page: 0, address: 10 is “00”. 5 C 17
becomes specified value. (Fine
adjustment)
Adjusting method:
Order Page Address Data Procedure Set the bit value of bit 2 to “0”,
Close the cassette compartment 7 3 92 and press PAUSE button.
1
without inserting cassette. (Note 2)
2 0 01 01 8 0 01 00
3 3 01 81 Press PAUSE button. Note 2: For the bit values, refer to “6-4. SERVICE MODE”, “4-
Check the data changes to 3. 3. Bit Value Discrimination”.
4 3 02
“00”.
5 3 03 CH1
(Note 2)
6 0 01 00
Note 2: If the data is other than “00”, adjustment has errors.
For the error contents, see the following table.
Data of page: 3, CH2

Error contents
address: 03
01 Adjustment time out
Mechanism mode error (For example, the
10 adjustment is performed in the mode except Enlargement
for VTR stop mode.)
CH1
t1=0 ± 10 µsec
CH2
Fig. 6-3-3
6-30
3-4. VIDEO SYSTEM ADJUSTMENTS 2. AFC f0 Adjustment (VC-341 board) RadarW

Before perform the video system adjustments, check that the data Adjust the pull-in range of A/D converted clock generator during
of page: 0, address: 10 is “00”. playback.
If not, select page: 0, address: 10, and set the data “00”.
Video system adjustments must be performed in the following or- Mode VTR stop (PLAY/EDIT mode)
der. Signal No signal
Measurement Point Displayed data of page: 3, address: 03
Adjusting Procedure:
1. 28 MHz origin oscillation adjustment Measuring Instrument Adjusting remote commander
2. AFC f0 adjustment Adjustment Page C
3. S VIDEO OUT Y level adjustment Adjustment Address 19
4. S VIDEO OUT C level adjustment
Specified value The data of page: 3, address: 03 is “00”
5. VIDEO OUT level check
6. REC Y current adjustment Note 1: Check that the data of page: 0, address: 10 is “00”.
7. REC C/AFM current adjustment
Adjusting method:
1. 28 MHz Origin Oscillation Adjustment
(VC-341 board) Close the cassette compartment
1
Set the frequency of the clock for synchronization. without inserting cassette.
If deviated, the synchronization will be disrupted and the color 2 0 01 01
will become inconsistent. 3 3 01 82 Press PAUSE button.
Mode VTR stop (PLAY/EDIT mode) Check the data changes to
4 3 02
Signal No signal “00”.
Measurement Point Pin qa of IC151 Check that the data is “00”.
5 3 03
(Note 2)
Measuring Instrument Frequency counter
6 0 01 00
Adjustment Page F
Note 2: If the data is other than“00”, adjustment has errors.
Specified value f = 14318181 ± 68 Hz (NTSC model)
f = 14187500 ± 54 Hz (PAL model)
Note 2: Refer to “2. DISASSEMBLY”, when opening the VC-
341 board.
Adjusting method:
1 0 01 01
Change the data and set the
2 F 10 frequency (f) to the specified
value.
3 F 10 Press PAUSE button.
4 0 01 00
VC-341 BOARD (SIDE B)
Measurement
Point
12 11 1
13 48
24 37
25 36
IC151
Fig. 6-3-4
6-31
3. S VIDEO OUT Y Level Adjustment (VC-341 board) 4. S VIDEO OUT C Level Adjustment (VC-341 board)
Mode VTR stop (PLAY/EDIT mode) Mode VTR stop (PLAY/EDIT mode)
Signal No signal Signal No signal
Measurement Point Y signal terminal of S VIDEO jack Measurement Point Chroma signal terminal of
(75 Ω terminated) S VIDEO jack (75 Ω terminated)
Measuring Instrument Oscilloscope External trigger: Y signal terminal of
S VIDEO jack (75 Ω terminated)
Adjustment Page C
Measuring Instrument Oscilloscope
Adjustment Address 1A
Adjustment Page C
Specified value A = 286 ± 5 mVp-p (NTSC model)
A = 300 ± 5 mVp-p (PAL model) Adjustment Address 1B
Note: Check that the data of page: 0, address: 10 is “00”. Specified value A = 286 ± 5 mVp-p (NTSC model)
A = 300 ± 5 mVp-p (PAL model)
Adjusting method: Note: Check that the data of page: 0, address: 10 is “00”.
Adjusting method:
1 0 01 01
2 C 1A SYNC level (A) to the 1 0 01 01
specified value. Change the data and set the
3 C 1A Press PAUSE button. 2 C 1B burst level (A) to the specified
value.
4 0 01 00
3 C 1B Press PAUSE button.
4 0 01 00
A
A
H H
Fig. 6-3-5 Fig. 6-3-6
6-32
5. VIDEO OUT Level Check (VC-341 board)

Signal No signal
Measurement Point Video terminal of A/V jack
(75 Ω terminated)
Measuring Instrument Oscilloscope
Specified value Sync level:
A = 286 ± 20 mVp-p (NTSC)
A = 300 ± 20 mVp-p (PAL)
Burst level:
B = 286 ± 20 mVp-p (NTSC)
B = 300 ± 20 mVp-p (PAL)
Checking method:
Check that the SYNC level
1 (A) satisfies the specified
value.
Check that the burst level (B)
2
satisfies the specified value.
Fig. 6-3-7
6-33
6. REC Y Current Adjustment (VC-341 board) Adjusting method:

Adjust the Y FM signal recording current.
Mode VTR recording (PLAY/EDIT mode) Close the cassette compartment
1
Signal No signal without inserting cassette.
Measurement Point REC RF (Pin 7 of CN007) 2 Set to the VTR stop mode.
Measuring Instrument Oscilloscope 3 0 01 01
(20 MHz BW LIMIT: OFF) 4 C 14 01 Press PAUSE button.
Adjustment Page C 5 A 10 10 Press PAUSE button.
Adjustment Address 1E, 1F 6 7 10 02 Press PAUSE button.
Specified value A = 235 ± 5 mVp-p (NTSC) 7 A 1A Note down the data.
A = 280 ± 5 mVp-p (PAL)
Note 1: Check that the data of page: 0, address: 10 is “00”. press PAUSE button.
Note 2: Don’t disconnect the DC power supply of camcoder dur- 8 A 1A
06: NTSC model
ing the following adjustments. 26: PAL model
When the following symptom occurs, reset the data of A
page to the values note down. Set to the VTR recording
9
1) The power is shut off so that unit can not operate. mode. (Note 3)
10 3 92 10
12 C 1F REC Y signal level (A) to the
A specified value.
13 C 1F Press PAUSE button.
Read the data, and this data is
14 C 1F
named D1F.
0.18 µsec 15 C 1E D1F Press PAUSE button.
Fig. 6-3-8
17 3 92 00
18 Set to the VTR stop mode.
Set data noted down at step 7,
19 A 1A
and press PAUSE button.
20 7 10 E2 Press PAUSE button.
21 A 10 00 Press PAUSE button.
22 C 14 00 Press PAUSE button.
23 0 01 00
Note 3: Use the REC buttons of the adjustment remote com-
mander (with HOLD switch set in the OFF position).
6-34
7. REC C/AFM Current Adjustment 7-2. REC C Current Check (VC-341 board)
Check the recording current level of the REC chroma signal.
7-1. Preparations If it is too low, chroma signal noise in playback picture will be
Note 1: Check that the data of page: 0, address: 10 is “00”. increased. If too high, Y signal noises will increase and white
modulation noises will be produced.
Order Page Address Data Procedure Mode VTR recording (PLAY/EDIT mode)
Close the cassette compartment Signal No signal
1
without inserting cassette. Measurement Point REC RF (Pin 7 of CN007)
2 Set to the VTR stop mode. Measuring Instrument Oscilloscope
3 0 01 01 (20 MHz BW LIMIT: OFF)
4 C 14 01 Press PAUSE button. Specified value A = 50.8 ± 3.0 mVp-p (NTSC)
5 A 10 10 Press PAUSE button. A = 54.0 ± 3.0 mVp-p (PAL)
6 7 10 02 Press PAUSE button. Note 1: Check that the data of page: 0, address: 10 is “00”.
7 A 1A Note down the data. Checking method:
press PAUSE button.
8 A 1A Close the cassette compartment
06: NTSC model 1
26: PAL model without inserting cassette.
Note 2: Don’t disconnect the DC power supply of camcoder dur- Set to the VTR recording
2
ing the following adjustments. mode. (Note 2)
When the following symptom occurs, reset the data of A 3 0 01 01
page to the values note down.
4 3 91 30
1) The power is shut off so that unit can not operate.
5 3 92 20
6 C 25 Note down the data.
7 C 25 00 Press PAUSE button.
Check that the REC chroma
signal level (A) satisfies the
9
specified value, and note
down the signal level.
Set data noted down at step 6,
11 C 25
and press PAUSE button.
12 3 91 00
13 3 92 00
14 0 01 00
Perform “REC AFM Current
15 Adjustment” and “Processing
after Completed Adjustment”.
Center of the luminance line width
1.35 µsec
Fig. 6-3-9
6-35
7-3. REC AFM Current Adjustment (VC-341 board) 7-4. Processing after Completed Adjustment
Check the recording current level of the REC AFM signal. Note: Check that the data of page: 0, address: 10 is “00”.
If it is too low, the audio S/N will be deteriorated. If too high,
color beets will be produced on self recording/playback image.
Mode VTR recording (PLAY/EDIT mode) 1 Set to the VTR stop mode.
Signal No signal 2 0 01 01
Measurement Point REC RF (Pin 7 of CN007) Set data noted down at step 7
Measuring Instrument Oscilloscope 3 A 1A of “7-1. Preparations”, and
(20 MHz BW LIMIT: OFF) press PAUSE button.
Adjustment Page C 4 7 10 E2 Press PAUSE button.
Adjustment Address 25 5 A 10 00 Press PAUSE button.
Specified value NTSC model 6 C 14 00 Press PAUSE button.
A = (REC chroma signal level) × 0.292 7 0 01 00
± 0.9 mVp-p (Note 1)
PAL model
A = (REC chroma signal level) × 0.309
± 0.9 mVp-p (Note 1)
Note 2: REC chroma signal level is noted down at step 9 of “REC
C Current Check”
Adjusting method:
Close the cassette compartment
1
without inserting cassette.
Set to the VTR recording
2
mode. (Note 3)
3 0 01 01
4 3 92 20
6 C 25 REC AFM signal level (A) to
the specified value.
9 3 92 00
10 0 01 00
Perform “Processing after
11
Completed Adjustment”.
Center of the luminance line width
0.67 µsec
Fig. 6-3-10
6-36
3-5. AUDIO SYSTEM ADJUSTMENTS 1. BPF f0 Adjustment (VC-341 board)

Before performing the audio system adjustments, check that the Set the BPF passing frequency of IC801 so that the AFM signal
data of page: 0, address: 10 is “00”. can separate from the playback RF signal properly. If deviated,
If not, select page: 0, address: 10, and set data “00”. the noises and distortions will increase during high volume play-
back.
[Connecting the measuring instruments for the audio] Mode VTR playback (PLAY/EDIT mode)
Connect the audio system measuring instruments in addition to
the video system measuring instruments as shown in Fig. 6-3-11. Signal Alignment tape
For BPF adjustment
(WR5-11NS (NTSC))
(WR5-11CS (PAL))
In Playback Measurement Point Audio terminal of A/V OUT jack
Measuring Instrument Distortion meter
Audio level meter
Main unit
or distortion meter Adjustment Page C
Specified value The distortion rate should be
A/V OUT Audio
jack minimum.
Note: Check that the data of page: 0, address: 10 is “00”.
47 kΩ
47 kΩ: 1-249-437-11 Adjusting method:
TV monitor 1 0 01 01
Video Change the data and minimize
2 C 30
the distortion rate.
4 0 01 00
Fig. 6-3-11
2. 1.5 MHz Deviation Adjustment (VC-341 board)

Adjust to the optimum 1.5 MHz audio FM signal deviation.
If the adjustment is not correct, its playback level will differ from
that other units.
Mode VTR playback (PLAY/EDIT mode)
Signal Alignment tape
For checking operation
(WR5-5NSP (NTSC))
(WR5-5CSP (PAL))
Measurement Point Audio terminal of A/V OUT jack
Measuring Instrument Audio level meter
Adjustment Page C
Adjustment Address 2F
Specified value –7.5 ± 2.0 dBs
Note 2: Perform “BPF f0 Adjustment” before this adjustment.
Adjusting method:
1 0 01 01
2 C 2F 400 Hz audio signal level to
the specified value.
3 C 2F Press PAUSE button.
4 0 01 00
6-37
6-4. SERVICE MODE 2. Precautions Upon Using

the Adjustment Remote Commander
4-1. ADJUSTMENT REMOTE COMMANDER Mishandling of the adjustment remote commander may erase the
The adjustment remote commander is used for changing the cal- correct adjustment data at times. To prevent this, it is recommended
culation coefficient in signal processing, EVR data, etc. The ad- that all adjustment data be noted down before beginning adjust-
justment remote commander performs bi-directional ments and new adjustment data after each adjustment.
communication with the unit using the remote commander signal
line (LANC). The resultant data of this bi-directional communica-
tion is written in the non-volatile memory.
1. Using the Adjustment Remote Commander

1) Connect the adjustment remote commander to CN007 of VC-
341 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A).
2) Set the HOLD switch of the adjustment remote commander to
“HOLD” (SERVICE position). If it has been properly con-
nected, the LCD on the adjustment remote commander will
display as shown in Fig. 6-4-1.
Page Data Address
Fig. 6-4-1
3) Operate the adjustment remote commander as follows.

• Changing the page
The page increases when the EDIT SEARCH+ button is
pressed, and decreases when the EDIT SEARCH– button is
pressed. There are altogether 16 pages, from 0 to F.
Hexadecimal
notation 0 1 2 3 4 5 6 7 8 9 A B C D E F
LCD Display 0 1 2 3 4 5 6 7 8 9 A b c d E F
Decimal notation
conversion value 0 1 2 3 4 5 6 7 8 9 101112 1314 15
• Changing the address

The address increases when the FF (M) button is pressed,
and decreases when the REW (m) button is pressed. There
are altogether 256 addresses, from 00 to FF.
• Changing the data (Data setting)
The data increases when the PLAY (N) button is pressed,
and decreases when the STOP (x) button is pressed. There
are altogether 256 data, from 00 to FF.
• Writing the adjustment data
The PAUSE button must be pressed to write the adjustment
data in the nonvolatile memory. (The new adjusting data will
not be recorded in the nonvolatile memory if this step is not
performed)
4) After completing all adjustments, turn off the main power sup-
ply (8.4 V) once.
6-38
4-2. DATA PROCESS

The calculation of the DDS display and the adjustment remote
commander display data (hexadecimal notation) are required for
obtaining the adjustment data of some adjustment items. In this
case, after converting the hexadecimal notation to decimal nota-
tion, calculate and convert the result to hexadecimal notation, and
use it as the adjustment data. Indicates the hexadecimal-decimal
conversion table.
Hexadecimal-decimal Conversion Table 2

Lower digit of
hexadecimal 0 1 2 3 4 5 6 7 8 9 A B C D E F
Upper digit (A) (b) (c) (d) (E) (F)
of hexadecimal
0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
2 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
3 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
4 64 65 66 67 68 69 70 71 72 73 74 77 76 77 78 79
5 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
6 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111
7 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
8 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
9 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
A (A) 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
1 B (b) 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
C (c) 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
D (d) 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
E (E) 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
F (F) 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255
Note: The characters shown in the parenthesis ( ) shown the display on the adjustment remote commander.
(Example) If the DDS display or the adjustment remote commander shows BD (bd);
Because the upper digit of the adjustment number is B (b), and the lower digit is D (d), the meeting point
“189” of 1 and 2 in the above table is the corresponding decimal number.
Table 6-4-1
6-39
4-3. SERVICE MODE
Additional note on adjustment

Note: After the completion of the all adjustments, cancel the ser-
vice mode by either of the following ways.
1) After data on page: D and C is restored, press the RE-
SET button and unplug the main power supply. (In this
case, date and time and menu setting have been set by
users are canceled. Perform resetting)
2) After data on page: D and C is restored, select page: 0,
address: 01, and return the data to 00. And when data
on page: 2 are changed, return data to the original con-
dition.
1. Setting the Test Mode
Page C Address 14
Data Function
00 Normal
01 Test mode
Various emergency prohibitions and releases
Drum emergency, capstan emergency, loading motor
emergency, reel emergency, tape top and end, DEW
detection
Page D Address 10
Data Function
00 Normal
01 Forced camera power ON
02 Forced VTR power ON
03 Forced camera + VTR power ON
• Before setting the data , select page: 0, address: 01, and set data:
01.
• For page D and C, the data set will be recorded in the non-
volatile memory by pressing the PAUSE button of the adjust-
ment remote commander. In this case, take note that the test
mode will not be exited even when the main power is turned off
(8.4 Vdc).
• After completing adjustments/repairs, be sure to return the data
of this address to 00, and press the PAUSE button of the adjust-
ment remote commander. And select page: 0, address: 01, and
set data: 00.
6-40
2. Emergency Memory Address 2-1. EMG Code (Emergency Code)

The codes shown in the following table which correspond to er-
Page C Address F4 to FF rors that occur are recorded in addresses F4, F8, and FC.
Address Contents Code Type of Emergency

F4 1st EMG code 00 No error
Upper: MSW code when the mechanism starts 10 Loading motor time-out during load
F6 shifting the 1st time 11 Loading motor time-out during unload
Lower: MSW code when the 1st emergency occurs 20 T reel emergency (reel slack) during unloading
Lower: Target MSW code of the 1st emergency 21 S reel emergency (reel slack) during unloading
F7
occurs
22 T reel emergency
F8 2nd EMG code
23 S reel emergency
Upper: MSW code when the mechanism starts
FA shifting the 2nd time 30 FG emergency at the start up of the capstan
Lower: MSW code when the 2nd emergency occurs FG emergency during the normal rotation of the
31
Lower: Target MSW code of the 2nd emergency capstan
FB
occurs 40 FG emergency at the start up of the drum
FC Last EMG code 41 PG emergency at the start up of the drum
Upper: MSW code when the mechanism starts FG emergency during the normal rotation of the
42
FE shifting the last time drum
Lower: MSW code when the last emergency occurs PG emergency during the normal rotation of the
43
Lower: Target MSW code of the last emergency drum
FF
occurs Phase emergency during the normal rotation of the
44
drum
When there are no emergency, data 00 will be written in the above
addresses (F4 to FF). When the first emergency occurs, the data
corresponding to the emergency will be written in the address (F4
to F7) for this first emergency. In the same way, when the second
emergency occurs, the data corresponding to the emergency will
be written in the address (F8 to FB) for this second emergency.
The data corresponding to the emergency occurring the last will
be written in the address (FC to FF) for this last emergency.
Therefore the data of addresses FC to FF are renewed each time
an emergency occurs.
Note: After completing adjustments, be sure to initialize the data

of address F4 to FF to “00”.
Initializing method:
1 0 01 01
3 3 02 Check the data changes to “00”.
4 0 01 00
6-41
2-2. MSW Codes

• The lower parts of the data of addresses F6, FA and FE repre-
sent the MSW codes (mode switch, mechanism position) when
errors occurs.
• The upper parts of the data of addresses F6, FA and FE repre-
sent, when the mechanism position is to be moved, the MSW
codes at the start of movement (when moving the loading mo-
tor).
• The lower parts of the data of addresses F7, FB and FF repre-
sent the MSW codes of the desired movement when the mecha-
nism position is to be moved.
← Unloading Loading →
Mechanism position EJECT BL USE BL LOAD BL STOP BL TURN BL REC/PB BL REW
0 1 1 1 = 7
0 1 1 1 = 7
0 1 1 1 = 7
0 1 0 0 = 4
0 1 1 1 = 7
0 0 0 0 = 0
0 1 1 1 = 7
0 0 1 0 = 2
0 0 0 1 = 1
0 1 1 1 = 7
0 0 1 1 = 3
MSB
0 1 0 1 = 5
0 1 1 0 = 6
MODE SW C
MODE SW B
MODE SW A
LS chassis movement range

Pinch roller is detached
Releasing lock of Pinch roller is pressed

cassette campartment
Mechanism Position MSW Code Contents

Position at which the cassette compartment lock is released. The mechanism will not move any
EJECT 1
further in the unloading direction.
BLANC code. Between two codes. The mechanism will not be stopped by this code while it is
BL 7
operating.
EJECT completion position. When the cassette is ejected, the mechanism will stop at this
USE 3
position.
LOAD 2 Code during loading/unloading. Code that is used while the LS chassis is moving.
Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of
STOP 6
both reels turn on.
TURN 4 Position at which is used when the pendulum gear swings from S to T or from T to S.
PB, REC, CUE, REV, PAUSE, FF positions.
REC/PB 0
The pinch roller is pressed and tension regulator is on.
REW position. REW are carried at this position.
REW 5
The mechanism will not move any further in the loading direction.
6-42
3. Bit Value Discrimination Display on the Bit values

Bit values must be discriminated using the display data of the ad- adjustment bit3 bit2 bit1 bit0
justment remote commander for the following items. Us the table remote or or or or
below to discriminate if the bit value is “1” or “0”. commander bit7 bit6 bit5 bit4
Display on the adjustment remote commander 0 0 0 0 0
1 0 0 0 1
2 0 0 1 0
3 0 0 1 1
4 0 1 0 0
5 0 1 0 1
Address
6 0 1 1 0
Page bit3 to bit0 discrimination
7 0 1 1 1
bit7 to bit4 discrimination A 8 1 0 0 0
9 1 0 0 1
(Example) If the remote commander display is “8E”, bit value from A (A) 1 0 1 0
bit 7 to bit 4 can be discriminated from the column A,
and those from bit 3 to bit 0 from column B. B (b ) 1 0 1 1
C (C ) 1 1 0 0
D (d) 1 1 0 1
B E (E) 1 1 1 0
F (F) 1 1 1 1
4. Switch Check (1)
Page 2 Address 81
Bit Function When bit value = 1 When bit value = 0

0 POWER SW (SS-5100 block S001) ON OFF
1 MODE SW (SS-5100 block S001) ON OFF
2 DSPL/BATT INFO SW (CF-5100 block S001) ON OFF
3 EJECT SW (SS-5100 block S002) ON OFF
4 CC DOWN SW (Mechanism chassis) ON (DOWN) OFF (UP)
5
6
7
Using method:
1) Select page: 2, address: 81.
2) By discriminating the bit value of display data, the state of the
switches can be discriminated.
5. Switch Check (2)
Page 7 Address 0C
Bit Function When bit value = 1 When bit value = 0

2 A/V OUT jack (SI-039 board) Used Not used
3 S VIDEO jack (SI-039 board) Used Not used
Using method:
1) Select page: 7, address: 0C.
2) By discriminating the bit value of display data, the state of the
switch can be discriminated.
6-43
6. Switch Check (3)
Page 2 Address 60 to 67
Using method:
1) Select page: 2, address: 60 to 67.
2) By discriminating the display data, the pressed key can be discriminated.
Data
Address
00 to 0C 0D to 24 25 to 3F 40 to 5D 5E to 81 82 to AA AB to D7 D8 to FF
PANEL PANEL
60 STOP FF REW PLAY EASY
CLOSE OPEN
(KEY AD0) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block)
(CF-5100 block) (CF-5100 block)
(IC701 tl) (S003) (S007) (S012) (S015) (S022)
(S023) (S023)
COUNTER VIDEO
61 PAUSE FADER FOCUS BACKLIGHT
RESET LIGHT
(KEY AD1) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block) No key input
(CF-5100 block) (CF-5100 block)
(IC701 y;) (S004) (S011) (S016) (S019)
(S008) (S020)
END
62 TIME MENU VOLUME – VOLUME + EXECUTE
SEARCH
(KEY AD2) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block) No key input
(CF-5100 block)
(IC701 ya) (S005) (S009) (S017) (S021) (S024)
(S013)
63 DATE EXPOSURE TITLE EASY DUB

(KEY AD3) (CF-5100 block) (CF-5100 block) (CF-5100 block) (CF-5100 block) No key input
(IC701 yg) (S006) (S010) (S014) (S018)
64
(KEY AD4)
(IC701 yh)
PANEL PANEL
65
REVERSE NORMAL
(KEY AD5)
(PR-5100 block) (PR-5100 block)
(IC701 yj)
(S601) (S601)
66
(KEY AD6)
(IC701 yk)
67
(KEY AD7)
(IC701 yl)
7. LED, Video Light, IR Light Check
Page 7 Address 07 Bit5, Bit6
Using method:
1) Set the unit to camera mode.
2) Select page: 7, address: 07, and set the bit value of bit5 and bit6 to “1”.
3) Check that all LED are lit, that the IR light is lit, and that the video light is lit.
4) Select page: 7, address: 07, and set the bit value of bit5 and bit6 to “0”.
6-44
8. Record of Use Check
Page 7 Address A4 to A6, C8 to CF
Address Function Remarks

A4 Drum rotation Hour (H) 1000th place digit and 100th place digit of counted time (decimal digit)
A5 counted time Hour (L) 10th place digit and 1st place digit of counted time (decimal digit)
A6 (BCD code) Minute
C8 User initial power Year
C9 on date Month After setting the clock, set the date of power on next
CA (BCD code) Day
CB Final condensation Year
CC occurrence date Month
CD (BCD code) Day
CE Video light Hour (L) 10th place digit and 1st place digit of counted time (hexadecimal digit)
CF counted time (Note 4) Hour (H) 1000th place digit and 100th place digit of counted time (hexadecimal digit)
Using method:
1) The record of use data is displayed at page: 7, addresses: A4 to
A6 and C8 to CF.
Note 1: This data will be kept even if the cabinet (R) assembly
(VC-341 board CN005 (22P)) is removed.
Note 2: When the drum was replaced, initialize the drum rota-
tion counted time.
Note 3: When replacing the video light, initialize the data of ad-
dress: CE and CF.
Note 4: Video light counted time is indicated in hexadecimal
notation. Convert hexadecimal numbers to decimals be-
fore useing them.
Initializing method of drum rotation counted time:

2) Select page: 7, address: A4, set data: 00, and press the PAUSE
button.
3) Select address: A5 and A6 and set data “00” into them in the
same way as in address: A4.
6-45
9. Record of Self-diagnosis Check
Page 7 Address B0 to C6
Address Self-diagnosis code

B0 “Repaired by” code (Occurred 1st time) *1
B1 “Block function” code (Occurred 1st time)
B2 “Detailed” code (Occurred 1st time)
B4 “Repaired by” code (Occurred 2nd time) *1
B5 “Block function” code (Occurred 2nd time)
B6 “Detailed” code (Occurred 2nd time)
B8 “Repaired by” code (Occurred 3rd time) *1
B9 “Block function” code (Occurred 3rd time)
BA “Detailed” code (Occurred 3rd time)
BC “Repaired by” code (Occurred 4th time) *1
BD “Block function” code (Occurred 4th time)
BE “Detailed” code (Occurred 4th time)
C0 “Repaired by” code (Occurred 5th time) *1
C1 “Block function” code (Occurred 5th time)
C2 “Detailed” code (Occurred 5th time)
C4 “Repaired by” code (Occurred the last time) *1
C5 “Block function” code (Occurred the last time)
C6 “Detailed” code (Occurred the last time)
*1 : “01” t “C”, “03” t “E”
Using method:
1) The past self-diagnosis codes are displayed at page: 7, address:
B0 to C6. Refer to “SELF-DIAGNOSIS FUNCTION” for de-
tail of the self-diagnosis code.
Note: This data will be kept even if the cabinet (R) assembly
(VC-341 board CN005 (22P)) is removed.
6-46
FOR CAMERA OPTICAL AXIS ADJUSTMENT
Take a copy of CAMERA OPTICAL AXIS

FRAME with a clear sheet for use.
0
337.5 22.5
8
7 1
292.5 67.5
270 6 2 90
247.5 112.5
5 3
4
202.5 157.5
180
✄
6-47
FOR CAMERA COLOR REPRODUCTION ADJUSTMENT
Take a copy of CAMERA COLOR

REPRODUCTION FRAME with a
For NTSC model
clear sheet for use.
R-Y
R MG
YE
B-Y
CY
G
✄ CCD-TRV128/TRV228/TRV328/TRV428
For PAL model
R-Y
R MG
YE
B-Y
CY
G
CCD-TRV228E/TRV428E
✄
6-48E

Sony Video Camera Manual PDF

Uploaded by

Copyright:

Available Formats

Sony Video Camera Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony Video Camera Manual PDF

Uploaded by

Copyright:

Available Formats

CCD-TRV128/TRV228/TRV228E/TRV328/TRV428/TRV428E

Revision History AEP Model

M2100/M2101 MECHANISM Tourist Model

SPECIFICATIONS BLOCK DIAGRAMS

SERVICE NOTE FRAME SCHEMATIC DIAGRAMS REPAIR PARTS LIST

DISASSEMBLY SCHEMATIC DIAGRAMS

NTSC MODEL: CCD-TRV128/TRV228/TRV328/TRV428

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987629051.pdf).

Video camera recorder Input/Output connectors AC Adaptor AC-L15A/L15B

Table for differences of function

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT

After correcting the original service problem, perform the following

SI-039, FP-792 FLEXIBLE ·········································· 4-49

1-1. NOTE FOR REPAIR

When installing a connector, don’t press down at wire of connector.

Cut and remove the part of gilt

1-2. POWER SUPPLY DURING REPAIRS

1-3. TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)

4 Pull the timing belt in the direction of

Press the cassette compartment not to

Pincette [DC power supply]

5 Let go your hold the cassette

Timing belt Adjust the bending of a tape

1-4. LCD TYPE CHECK

Data LCD type

I/F unit for LANC control

1-5. SELF-DIAGNOSIS FUNCTION

Repaired by: Block Detailed Code

1-5-3. Service Mode Display

Backup No. Self-diagnosis Codes

2. Switching of Backup No.

1-5-4. Self-diagnosis Code Table

Block Detailed Symptom/State Correction

C 0 4 0 0 Non-standard battery is used. Use the InfoLITHIUM battery.

Block Detailed Symptom/State Correction

2-1. FLOW CHART

1 Lock ace x3 6 Lock ace x3 1 Lock ace x6 1 Tripod Screw 9 Tapping P2 x2

2-2. MECHANISM DECK SERVICE POSITION

How to move up the cassette

3 2 2 Info lithium battery

2-3. LCD SERVICE POSITION

CPC jig connector

Back light unit

I/F unit for LANC control

2-4. CIRCUIT BOARDS LOCATION

Board Name Function

2-5. FLEXIBLE BOARDS LOCATION

Note: Close the LCD panel, when you work.

OVERALL BLOCK DIAGRAM (1/5) OVERALL BLOCK DIAGRAM (5/5)

OVERALL BLOCK DIAGRAM (2/5) POWER BLOCK DIAGRAM (1/2)

OVERALL BLOCK DIAGRAM (3/5) POWER BLOCK DIAGRAM (2/2)

OVERALL BLOCK DIAGRAM (4/5)

CD-465 BOARD VC-341 BOARD (1/4)

IRIS Q951 CN951 CN151 PB C RF

MIC901 LND755 INT MIC

VC-341 BOARD (2/4) VIDEO HEAD

VC-341 BOARD (3/4) M2100/M2101 MECHA DECK (2/2)

VC-341 BOARD (4/4)

IC701 SIRCS PWM SIRCS PWM