Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Ca Choke Valve Series: Technical Data Sheet For Maximum Trim Size of 1.18"

    Uploaded by

    shyam
    The document discusses the technical specifications of LFA's CA choke valve series. The choke valves have a maximum trim size of 1.18 inches and can be used to manually or remotely control well production flow. They utilize a balanced cage and plug trim design to minimize stem loads and provide low operating torques. Standard end connections range from 1 to 4 inches and materials can be selected based on the required API material class and service conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ca Choke Valve Series: Technical Data Sheet For Maximum Trim Size of 1.18"

    Uploaded by

    shyam
    34 views4 pages
    The document discusses the technical specifications of LFA's CA choke valve series. The choke valves have a maximum trim size of 1.18 inches and can be used to manually or remotely control well production flow. They utilize a balanced cage and plug trim design to minimize stem loads and provide low operating torques. Standard end connections range from 1 to 4 inches and materials can be selected based on the required API material class and service conditions.

    Original Description:

    valve series

    Original Title

    valve

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the technical specifications of LFA's CA choke valve series. The choke valves have a maximum trim size of 1.18 inches and can be used to manually or remotely control well production flow. They utilize a balanced cage and plug trim design to minimize stem loads and provide low operating torques. Standard end connections range from 1 to 4 inches and materials can be selected based on the required API material class and service conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views4 pages

    Ca Choke Valve Series: Technical Data Sheet For Maximum Trim Size of 1.18"

    Uploaded by

    shyam
    The document discusses the technical specifications of LFA's CA choke valve series. The choke valves have a maximum trim size of 1.18 inches and can be used to manually or remotely control well production flow. They utilize a balanced cage and plug trim design to minimize stem loads and provide low operating torques. Standard end connections range from 1 to 4 inches and materials can be selected based on the required API material class and service conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    THE ART OF FLOW CONTROL

    When you are serious about your flow control,


    LFA Provides genuine solutions.

    CA CHOKE VALVE SERIES


    TECHNICAL DATA SHEET FOR
    MAXIMUM TRIM SIZE OF 1.18”

    The ‘CA’ product family of production choke valves utilize a 0.75”


    To 1.18” orifice and offer the ability to manually or remotely control
    well production flow at the wellhead and or flowline with a more
    conventional type choke body. The cage & plug flow trim is pressure
    balanced to minimize the stem loads and provide low operating
    torques. Standard end connections range in size from 1” to 4”.

    DESIGN CAGE & PLUG NEEDLE CAGE & PLUG


    TRIM SIZE: 0.75” 1.00” 1.18”
    CV: 11.2 27.0 26.5
    MAX BEAN SIZE: 48/64” 64/64” 76/64”
    END CONNECTION: CUSTOMER SPECIFIED

    VALVE MODEL CA
    BODY TYPE Right Angle
    BODY SIZE Suitable for max. 1.18” orifice
    BODY RATING 15,000 psi (max.), Limited by the rating of the body end connection.
    INLET CONNECTION See ‘End Connection’ table below
    OUTLET CONNECTION See ‘End Connection’ table below
    BONNET TYPE Lancaster Proprietary Bonnet
    BODY / BONNET MATERIAL See 'Material Options' table below
    STEM MATERIAL See ‘Material Options’ table below
    SEAL MATERIAL See ‘Material Options’ table below
    TRIM STYLE Equal Percentage Cage and Plug or Needle
    BALANCED / UNBALANCED Balanced
    FLOW CHARACTERISTIC Equal Percentage or Linear
    TRIM MATERIAL See ‘Trim Options’ table below
    DESIGN CV See the table above
    LEAKAGE CLASSIFICATION ANSI/FCI 70-2 Class IV (Standard)
    THE ART OF FLOW CONTROL
    When you are serious about your flow control, LFA Provides genuine solutions.

    API SPEC. 6A MATERIAL CLASS DESIGNATIONS

    Temperature Certification Material Class Designations


    Class Level AA BB CC DD EE FF HH
    TECHNICAL DATA SHEET FOR MAXIMUM TRIM SIZE OF 1.18”

    STD/PSL-1 BB BB FF EE EE FF HH
    P-U
    -20F to 250F PSL-2 EE EE FF EE EE FF HH
    CA CHOKE VALVE SERIES

    -29C to 82C
    PSL-3 EE EE FF EE EE FF HH
    STD/PSL-1 EE EE FF EE EE FF HH
    L-U
    -50F to 250F PSL-2 EE EE FF EE EE FF HH
    -46C to 121C
    PSL-3 EE EE FF EE EE FF HH

    NOTES: other temperature classes are available upon request

    BB-GENERAL FF- SOUR HH- SOUR


    EE-SOUR SERVICE
    SERVICE SERVICE SERVICE
    RECOMMENDED General Oil, Sour (H2S) Sour (H2S) High Sour (H2S)
    SERVICE Corrosive (CO2) Low Corrosive (CO2) Corrosive (CO2) High Corrosive (CO2)
    Clad Low Alloy Steel
    Carbon Steel (60K) Carbon Steel (60K) Carbon Steel (60K)
    BODY Low Alloy Steel (75K) Low Alloy Steel (75K) Low Alloy Steel (75K)
    Corrosion Resistant
    Alloy
    Carbon Steel (60K) Carbon Steel (60K) Carbon Steel (60K) Clad Low Alloy Steel
    BONNET Low Alloy Steel (75K) Low Alloy Steel (75K) Low Alloy Steel (75K) Corrosion Resistant
    Stainless Steel (75K) Stainless Steel (75K) Stainless Steel (75K) Alloy
    AISI 17-4PH AISI 17-4PH Inconel 625 or Inconel 625 or
    STEM Low Alloy Steel Low Alloy Steel Inconel 718 Inconel 718
    AISI 17-4PH AISI 17-4PH
    PLUG/CAGE
    Low Alloy Steel w/ Low Alloy Steel w/ Inconel 718 w/ TCC Inconel 718 w/ TCC
    ASSEMBLY TCC TCC

    SEALS PTFE/PEEK PTFE/PEEK PTFE/PEEK PTFE/PEEK

    NOTE: The materials supplied may change based on the customers NACE service designation (i.e.- “x.xx- NL”)
    THE ART OF FLOW CONTROL
    When you are serious about your flow control, LFA Provides genuine solutions.

    TECHNICAL DATA SHEET FOR MAXIMUM TRIM SIZE OF 1.18”


    CA CHOKE VALVE SERIES

    C D
    Connection Working Dim. A B
    Manual Mounting
    Size Pressure psig Ref. Outlet Inlet
    Operator Flange
    1.00” (25.4) Nom. Orifice (Adj.-Pos., 64/64 Linear Needle or 76/64 EP Cage), Max CV = 26.5
    2” NPS, RF ANSI 600 LB. 7.62 (194) 7.62 (194)
    3” NPS, RF ANSI 600 LB. 8.00 (200) 8.00 (200)
    4” NPS, RF ANSI 600 LB. 10.75 (273) 10.75 (273)
    2” NPS, RTJ ANSI 900 LB. 8.75 (222) 8.75 (222)
    3” NPS, RTJ ANSI 900 LB. 8.75 (222) 8.75 (222)
    4” NPS, RTJ ANSI 900 LB. 11.25 (286) 11.25 (286) 20.03 18.50
    2” NPS, RTJ ANSI 1500 LB. 8.81 (224) 8.81 (224) (508.76) (469.90)

    3” NPS, RTJ ANSI 1500 LB. 9.94 (224) 9.94 (224)


    4” NPS, RTJ ANSI 1500 LB. 11.31 (287) 11.31 (287)
    2” NPS, RTJ ANSI 2500 LB. 8.75 (222) 8.75 (222)
    3” NPS, RTJ ANSI 2500 LB. 9.38 (238) 9.38 (238)
    4” NPS, RTJ ANSI 2500 LB. 11.62 (295) 11.62 (295)
    THE ART OF FLOW CONTROL
    When you are serious about your flow control, LFA Provides genuine solutions.

    C D
    Connection Working Dim. A B
    Manual Mounting
    Size Pressure psig Ref. Outlet Inlet
    Operator Flange
    2-1/16” (52.38) API 5,000 6.89 (175) 7.99 (203)
    TECHNICAL DATA SHEET FOR MAXIMUM TRIM SIZE OF 1.18”

    2-9/16” (65.09) API 5,000 8.19 (208) 9.33 (237)


    3-1/16” (77.79) API 5,000 9.69 (246) 9.57 (243)
    CA CHOKE VALVE SERIES

    4-1/16” (103.19) API 5,000 10.12 (257) 12.64 (321)


    1-13/16” (46.04) API 10,000 7.68 (194) 8.82 (224)
    2-1/16” (52.39) API 10,000 7.68 (195) 8.82 (224) 20.03 18.50
    2-9/16” (65.09) API 10,000 8.19 (208) 9.33 (237) (508.76) (469.90)

    3-1/16” (77.79) API 10,000 7.80 (198) 8.94 (227)


    4-1/16” (103.19) API 10,000 9.82 (252) 11.50 (292)
    1-13/16” (46.04) API 15,000 8.46 (215) 9.65 (245)
    2-1/16” (52.39) API 15,000 8.86 (225) 10.32 (262)
    2-9/16” (65.09) API 15,000 10.51 (267) 11.73 (298)
    3-1/8” (79.38) API 15,000 10.35 (263) 11.61 (295)

    * “C” and “D” shown with 3” x 2” reduced orifice trim


    1. Using our 24vDC actuator shown, “E” is 11.97”; Pneumatic & Hydraulic units are also available as well as other
    Electric units
    2. For sizes or dimensions not shown, for ANSI flanges or hub connections, contact sales or engineering
    3. In addition to “C”, provide clearance for bonnet and trim removal as follows (worse case – with trim in fully
    closed position): 1.0” (25.4) Nominal, add 7.81” (198.37) for needle trim; add 6.75” (171.45) for cage trim
    4. (xxx.xx) dimensions shown in parenthesis are in millimeters (mm)
    5. Orifices in X/64ths are openings with the equivalent area of a circle with the diameter of X/64ths of an inch;
    64/64ths = 1.00”
    6. API 5,000 psig is equal to 34.473 MPa; 10,000 psig = 68.946 MPa; 15,000 psig = 103.420 MPa; 20,000 psig =
    137.893 MPa.
    7. Dimensions shown above are subject to change without notice. Other dimensions are available, please consult
    the Lancaster engineering department.

    You might also like