Pumpworks 610-BB3
Pumpworks 610-BB3
Pumpworks 610-BB3
60 Hz
Performance
Coverage
performances
FLOW (GPM) shown are normal
FLOW (m3/h) and are to be used
50 Hz for preliminary
selection only.
Performance
Coverage
FLOW (GPM)
*Other API 610 Material Classes and Combinations are available including D-1 and D-2.
PWM APi 610 BB3 MUlTiSTAge PUMP
Quality
Manufactured
and tested in
the USA
Impeller
Precision cast
for maximum
efficiency
Dynamically balanced to 4W/N before
mounting
Opposing impeller design to limit axial
thrust to maximize thrust bearing life
Individually keyed, shrunk fit and restrained
in the direction of thrust by split ring
Mounted on shaft with vane tips
staggered for reduced pressure
pulsation
Optional double suction large eye
first stage impeller for lower NPSH
performance
Flanges
ANSI B16.5 Class 900# RF suction Labyrinth Oil Seal
& discharge INPRO bearing isolators to provide optimum bearing housing
Optional 600# RF and 1500# RF environment
Bearing Lubrication
Nozzles
Ring oil lubrication to ensure effective lubrication
Cast integrally in the lower half casing,
Optional pure or purge mist lubrication
permitting disassembly without
disturbing piping connections
Crossover Line Center Bushing Case Studs & Bolts
Compact design for Split design facilitates Torque to 42,000 psi
streamlined fluid
flow
inspection, removal
and replacement
stress for maximum
clamping force on the
Delivery
26 weeks for API 610
Sized for minimum Sized to balance split line
material class S-4, S-6, S-8
friction loss and axial thrust Case nuts are high
and C-6
maximize efficiency Provides maximum strength Turbine type
Refer to the factory on
Casing
Mounting feet cast integral into
the bottom half providing near
centerline mounting to minimize
thermal growth in hot service
Wide feet design to minimize
Balance Line affects of forces and moments
Maintains equal seal imposed by the system piping
chamber pressure Hydrostatic test of pressure
containing parts to 1.5 MAWP
Bearing Design
Ball / Ball
Optional Sleeve / Ball
Optional Sleeve / Kingsbury
PWM APi 610 BB3 MUlTiSTAge PUMP
OUTline DiMenSiOnS
NOTES:
1. All dimensions are in
inches. Dimensions are not
certified for construction.
2. Standard construction
flange rating 900#
3. All dimensions based on
ball thrust housings, except
for 12x12x16, which is a 6"
JHJ Pivot Shoe Thrust
short panel DotteD lIne Does not prInt
Bearing.
*4. For clockwise rotation -
suction and discharge are
on opposite sides in
Section View A-A and side
view. Dimension G is
toward motor from
discharge c'line
OUTline DiMenSiOnS
Ball Bearing Sleeve Sleeve Max. Stuffing Box Dim.
Case Max. STANDARD SHAFT DIMENSIONS Pivot Wear
PUMP Sizes Ball Shoe BHP/ Gland
Min. Hydro Ring Face to 1st
SIZE Ball Radial Thrust Radial Thrust Pivot 100 Bore Obstruction BC
Thick Test Stuff. Slv. Thrust Ball Cplg. Brg. Brg. Brg. Shoe. Dia.
Imp. Box Brg. RPM
Brg. Brg. Size Size Size Size Int. Ext.
3x6x9 .75 3250 2.69 2.635 2.625 2.166 2.559 2.44 7311 6213 7310 5 JHJ 42 5.50 5.19 3.38 3.88 6.69
4x6x10 .75 3250 2.75 2.635 2.625 2.166 2.559 2.44 7311 6213 7310 5 JHJ 42 6.00 5.19 3.38 3.88 6.69
4x6x11 .75 3250 2.88 2.635 2.625 2.166 2.559 2.44 7311 6213 7310 5 JHJ 42 6.25 5.19 3.38 3.88 6.69
6x8x12 .63 3250 3.50 3.260 3.250 2.166 2.559 2.44 7311 6213 7310 5 JHJ 80 7.13 6.31 4.50 4.00 8.00
8x10x13 .69 3250 3.38 3.260 3.250 2.559 3.150 3.00 7313 6216 7313 5 JHJ 80 8.50 6.31 4.50 4.88 8.00
12x12x16 .69 3250 4.19 3.760 3.750 --- --- 3.75 --- --- --- 6 JHJ 123 10.50 6.75 5.50 5.13 8.75
NOTES:
1. All dimensions are in inches.
2. Hydrotest pressures based on standard 900# flange rating, at 1 1/2 maximum working pressure
3. Max BHP/100 RPM based on 7500# torsional shaft stress
PWM6Pg-100.0-1209