WKTR/WKB vertical centrifugal pumps are designed for hydrocarbon and ammonia applications where NPSHA is critical. They can handle flows up to 111 l/s and total heads up to 500m. The pumps have a radial split ring design with single entry impellers and stages sealed with O-rings. Materials include various grades of steel, chromium, and nickel alloys. Features include large diameter column pipes, journal bearings, conical couplings, radial carbon bearings, and enclosed motor lanterns.
WKTR/WKB vertical centrifugal pumps are designed for hydrocarbon and ammonia applications where NPSHA is critical. They can handle flows up to 111 l/s and total heads up to 500m. The pumps have a radial split ring design with single entry impellers and stages sealed with O-rings. Materials include various grades of steel, chromium, and nickel alloys. Features include large diameter column pipes, journal bearings, conical couplings, radial carbon bearings, and enclosed motor lanterns.
WKTR/WKB vertical centrifugal pumps are designed for hydrocarbon and ammonia applications where NPSHA is critical. They can handle flows up to 111 l/s and total heads up to 500m. The pumps have a radial split ring design with single entry impellers and stages sealed with O-rings. Materials include various grades of steel, chromium, and nickel alloys. Features include large diameter column pipes, journal bearings, conical couplings, radial carbon bearings, and enclosed motor lanterns.
WKTR/WKB vertical centrifugal pumps are designed for hydrocarbon and ammonia applications where NPSHA is critical. They can handle flows up to 111 l/s and total heads up to 500m. The pumps have a radial split ring design with single entry impellers and stages sealed with O-rings. Materials include various grades of steel, chromium, and nickel alloys. Features include large diameter column pipes, journal bearings, conical couplings, radial carbon bearings, and enclosed motor lanterns.
1765.11/01-EN WKTR/WKB Vertical, High Pressure Centrifugal Pumps (Design as per API 610 10th edition Category VS6)
ISO 9001 : 2000
ISO 14001 : 2004
Applications Operating Data
WKTR pumps can be used for Hydrocarbons for refinery Pump sizes : DN 40 to DN 150 and petrochemical applications, as well as for Ammonia, Capacity : Q upto 111 l/s (400 m3/h) condensate handling where NPSHA is critical. Total head : H upto 500 m Speed : n upto 3600 rpm Design Operating pressure : Upto 51 kg/cm2 Operating temperature : -40 to 2000C Vertical, radially split, ring section pump with radial single entry impellers, multistage. The stages are sealed off against each other by O-rings & clamped together by tie Materials rods. Part Description Materials Provision is made on Can to mount complete pump on separate mounting plate for better structural stability. Distributor casing ASTM A 516 Gr. 70, & Can ASTM A 516 Gr. 60, The suction and discharge nozzles are always horizontal SS 304 / SS 316 (on request) and inline. Suction casing WCB, CA6NM, CF8M WKB : Without Can execution, available on request. Discharge casing WCB, CA6NM, CF8M Stage casing WCB, CA6NM, CF8M Designation Stuffing box WCB, CA6NM, CF8M housing WKTR 100 / 5 Diffuser suction CA6NM, CF8M Type series Diffuser CA6NM, CF8M Nominal diameter of Pump/Intermediate/ AISI 410 Discharge nozzle in mm Drive shaft Impeller suction CA6NM, CF8M No. of stages Impeller (stage) CA6NM, CF8M Impeller ring 1.4024.19, CF8M, NiCi Wearing ring Cr HARD 400, CF8M col. Coated, 1.4024.19 Spacer sleeve NiCi, AISI410, AISI316 Column pipe A 105 + A 106 Gr. B, SS 304 Tie Rod B8M Column Pipe Column Pipe : • Higher diameters for lower frictional losses. • Various combinations of column pipes to meet exact requirements.
Journal Bearing Journal Bearing :
• Provision of bearing spiders. • Bearings made up of high grade carbon to support pump shaft lubricated by pumping medium. • Reduced bearing span to increase rotor stability.
Conical Coupling Conical Coupling :
• S uitable for reverse rotation. • Excellent alignmant due to conical feature.
Can
Hydraulics Hydraulics : • Higher efficiency for wider range of flow. • Interchangeability of impeller and diffuser with WK series pump.
Radial Carbon Radial Carbon Bearing :
Bearings • On rear side of suction impeller to avoid possibility of dry running.
Suction Impeller Suction Impeller
• Designed for lower NPSHr. WKTR/WKB
Motor Lantern : • Rigid motor lantern serving as drive stool. • For ease of installation of motor suitable controlled location diameter is provided for flange mounting. Motor Lantern
Protective Covers : Protective • All rotating parts which are exposed Covers are protected using protective covers for human safety.
Thrust Bearing : Thrust Bearing
• Oil lubricated four point contact ball bearing. • Suitable for reverse rotation of pump. • Bearing designed to take care of entire pump load. • Provision of oil mist lubrication available on request.
Shaft Sealing : Shaft Sealing
• Shaft seal housing is designed for installations of all combinations of seals as per API 682. • Due to spacer type of Distributor coupling mechanical seal can Casing be removed without removal of drive. • Gland packing execution is optional. • For high temperature cooled stuffing box. • In-board seal is subjected to suction pressure. • Adaptor is provided with carbon bearing which acts as a radial bearing, increases the seal life.
Distributor Casing : • Designed to meet API requirements. Can • Suction and discharge flanges as per ASME and in- line. • Suction and discharge chamber designed for same pressure rating.
Can : • Designed for separate mounting plate arrangement. • Through bolting between can and distributor casing. • Designed for discharge pressure. WKTR/WKB
Selection Chart (50 Hz)
2900 RPM 1000 3000
2000 500 400 300 1000 H 200 ft H 500 m 400 100 300
